)]}' { "log": [ { "commit": "eee87d3196c9a7ac3422f4298e2250ca68d791c1", "tree": "754fb40d3684b55cc4a30729511e2fa8a59bab25", "parents": [ "569be443e3c1329fc6725988004f5d8a32fe3be5" ], "author": { "name": "Adrian Bunk", "email": "bunk@kernel.org", "time": "Sun Jan 27 18:14:45 2008 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Sun Jan 27 18:14:45 2008 +0100" }, "message": "i2c: the scheduled I2C RTC driver removal\n\nThis patch contains the scheduled removal of legacy I2C RTC drivers with \nreplacement drivers.\n\nSigned-off-by: Adrian Bunk \u003cbunk@kernel.org\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "1c7c2cdec3a6b2873439096983794a550d7ff65b", "tree": "10ea67846407e9882d50e95a9db675140dd423eb", "parents": [ "0444fa78751260b38f0db3418e001bf86593f05f", "7267c3377443322588cddaf457cf106839a60463" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Jan 26 22:54:32 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Jan 26 22:54:32 2008 -0800" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (63 commits)\n ide: remove REQ_TYPE_ATA_CMD\n ide: switch ide_cmd_ioctl() to use REQ_TYPE_ATA_TASKFILE requests\n ide: switch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requests\n ide: fix final status check in drive_cmd_intr()\n ide: check BUSY and ERROR status bits before reading data in drive_cmd_intr()\n ide: don\u0027t enable local IRQs for PIO-in in driver_cmd_intr() (take 2)\n ide: convert \"empty\" REQ_TYPE_ATA_CMD requests to use REQ_TYPE_ATA_TASKFILE\n ide: initialize rq-\u003ecmd_type in ide_init_drive_cmd() callers\n ide: use wait_drive_not_busy() in drive_cmd_intr() (take 2)\n ide: kill DATA_READY define\n ide: task_end_request() fix\n ide: use rq-\u003enr_sectors in task_end_request()\n ide: remove needless -\u003ecursg clearing from task_end_request()\n ide: set IDE_TFLAG_IN_* flags before queuing/executing command\n ide-tape: fix handling of non-special requests in -\u003eend_request method\n ide: fix final status check in task_in_intr()\n ide: clear HOB bit for REQ_TYPE_ATA_CMD requests in ide_end_drive_cmd()\n ide: fix -\u003eio_32bit race in ide_taskfile_ioctl()\n cmd64x: remove /proc/ide/cmd64x\n ide: remove broken disk byte-swapping support\n ...\n" }, { "commit": "7267c3377443322588cddaf457cf106839a60463", "tree": "5471cd70b6275999500103f0a6b49bbc5557c692", "parents": [ "5a9e77af970f14a94482a6d4dca5c48efb70deb2" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:13 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:13 2008 +0100" }, "message": "ide: remove REQ_TYPE_ATA_CMD\n\nBased on the earlier work by Tejun Heo.\n\nAll users are gone so we can finally remove it.\n\nCc: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "34f5d5ae35240a11846875d76eb935875ab0c366", "tree": "4090df8cd81e97d8b86deebf83420426316dfa6b", "parents": [ "0455fcc821e87d362f2047922c59c0f378a122b5" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:12 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:12 2008 +0100" }, "message": "ide: switch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requests\n\nBased on the earlier work by Tejun Heo.\n\nSwitch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requests\nand make ide_wait_cmd() static.\n\nThere should be no functionality changes caused by this patch.\n\nCc: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2624565caacedd740fce7803fe2c162842aa5df4", "tree": "fe177bad8d72bfefa138a3abd7f8c7b92f549169", "parents": [ "4906f3b4cddc3e4d62955ed386598561f95602c0" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:11 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:11 2008 +0100" }, "message": "ide: use wait_drive_not_busy() in drive_cmd_intr() (take 2)\n\nUse wait_drive_not_busy() in drive_cmd_intr().\n\nv2:\n* Fix wait_drive_not_busy() comment (noticed by Sergei).\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4906f3b4cddc3e4d62955ed386598561f95602c0", "tree": "fcf2ef00e2d6625ae521a83d101a3c7a92ae5c6a", "parents": [ "4d7a984bdcbdda69fc6b2a4a655415140270aa7b" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:11 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:11 2008 +0100" }, "message": "ide: kill DATA_READY define\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4d7a984bdcbdda69fc6b2a4a655415140270aa7b", "tree": "92d331aa25949277fe76354dfdaf5a5d6e62aaf4", "parents": [ "79f21b84d94c02b941818df282b61f2a5a028722" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Sat Jan 26 20:13:11 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:11 2008 +0100" }, "message": "ide: task_end_request() fix\n\ntask_end_request() modified to always call ide_end_drive_cmd()\nfor taskfile requests. Previously, ide_end_drive_cmd() was\ncalled only when IDE_TFLAG_FLAGGED was set. Also,\nide_dma_intr() is modified to use task_end_request().\n\nEnables TASKFILE ioctls to get valid register outputs on\nsuccessful completion.\n\nBart:\n- ported it over recent IDE changes\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "657cc1a8f6cd6a9e2974cba3af9fccd8c25e06ad", "tree": "4f1542ec2738993193ac4c02cba78aa4ed981f80", "parents": [ "3687221f28058c40e2c57a286decd0caeac67382" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:10 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:10 2008 +0100" }, "message": "ide: set IDE_TFLAG_IN_* flags before queuing/executing command\n\n* Add IDE_TFLAG_{HOB,TF,DEVICE} defines.\n\n* Set IDE_TFLAG_IN_* flags in {do_rw,ide_no_data,ide_raw}_taskfile() users.\n\n* Remove no longer needed -\u003etf_flags setup from ide_end_drive_cmd().\n\nThere should be no functionality changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "35cf2b94d0ecb7034cfa05dd725721538bbb83fc", "tree": "6c3681f06b078626aeeb8de1e28bbdd458f95c70", "parents": [ "63c4467805c9b23231d8bc9b61305b2013f9fea2" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Sat Jan 26 20:13:10 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:10 2008 +0100" }, "message": "ide: fix -\u003eio_32bit race in ide_taskfile_ioctl()\n\nIn ide_taskfile_ioctl(), there was a race condition involving\ndrive-\u003eio_32bit. It was cleared and restored during ioctl\nrequests but there was no synchronization with other requests.\nSo, other requests could execute with the altered -\u003eio_32bit\nsetting or updated drive-\u003eio_32bit could be overwritten by\nide_taskfile_ioctl().\n\nThis patch adds IDE_TFLAG_IO_16BIT flag to indicate to\nide_pio_datablock() that 16-bit I/O is needed regardless of\ndrive-\u003eio_32bit settting.\n\nBart:\n- ported it over recent IDE changes\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9e47be0c97f7357b80e91dc0632e9cce2eb025e0", "tree": "7047b2b3c9ac094b801d376e4bbb95292b1962ac", "parents": [ "3a5015cc9d7051ce8e706ef48276d8484aac0c4b" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:09 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:09 2008 +0100" }, "message": "ide: remove broken disk byte-swapping support\n\nRemove broken disk byte-swapping support:\n- it can cause a data corruption on SMP (or if using PREEMPT on UP)\n- all data coming from disk are byte-swapped by taskfile_*_data() which\n results in incorrect identify data being reported by /proc/ide/ and IOCTLs\n- \"hdx\u003dbswap/byteswap\" kernel parameter has been broken on m68k host drivers\n (including Atari/Q40 ones) since 2.5.x days (because of \u0027hwif\u0027 zero-ing)\n- byte-swapping is limited to PIO transfers (for working with TiVo disks on\n x86 machines using user-space solutions or dm-byteswap should result in\n much better performance because DMA can be used)\n\nFor previous discussions please see:\n\nhttp://www.ussg.iu.edu/hypermail/linux/kernel/0201.0/0768.html\nhttp://lkml.org/lkml/2004/2/28/111\n\n[ I have dm-byteswap device mapper target if somebody is interested\n (patch is for 2.6.4 though but I\u0027ll dust it off if needed). ]\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "81ca691981da718727281238b435dcf1528d2fda", "tree": "4c4845a77d94fe91bd7d1345bf9d992852b8d572", "parents": [ "4f52a32994f9e05fb8ae1a9ba3f20cd0b55145b7" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:08 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:08 2008 +0100" }, "message": "ide: add ide_set_irq() inline helper\n\nThere should be no functionality changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ade2daf9c6e57845fe83a24e0a9fa1c03c6e91b1", "tree": "68070062d6306442caee50630c4213c911eb9064", "parents": [ "8ac4ce742c66100931b6f2d7a36b0df08bc721fe" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:07 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:07 2008 +0100" }, "message": "ide: make remaining built-in only IDE host drivers modular (take 2)\n\n* Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c\n file for probing PCI host drivers registered with IDE core (special case\n for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER\u003dy) and then take care of\n the ordering in which all IDE host drivers are probed when IDE is built-in\n during link time.\n\n* Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch\n specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris\n arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific).\n\n* Move probing of ide-cris (cris arch specific) host driver before cmd640\n (x86 arch specific).\n\n* Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends\n on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300\n (h8300 arch specific).\n\n* Add \"probe_vlb\" kernel parameter to cmd640 host driver and update\n Documentation/ide.txt accordingly.\n\n* Make IDE_ARM config option visible so it can also be disabled if needed.\n\n* Remove bogus comment from ide.c while at it.\n\nv2:\n* Fix two issues spotted by Sergei:\n - replace ENOMEM error value by ENOENT in ide-h8300 host driver\n - fix MODULE_PARM_DESC() in cmd640 host driver\n\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Mikael Starvik \u003cstarvik@axis.com\u003e\nCc: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nCc: Roman Zippel \u003czippel@linux-m68k.org\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "cbb010c180294a5242a7681555c28737d9dd26ab", "tree": "073883d1dc672bb38021563ca0d9cd762cd5abf2", "parents": [ "57c802e84f9c759c3d1794a9dbe81bc10444df62" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:06 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:06 2008 +0100" }, "message": "ide: drop \u0027initializing\u0027 argument from ide_register_hw()\n\n* Rename init_hwif_data() to ide_init_port_data() and export it.\n\n* For all users of ide_register_hw() with \u0027initializing\u0027 argument set\n hwif-\u003epresent and hwif-\u003ehold are always zero so convert these host\n drivers to use ide_find_port()+ide_init_port_data()+ide_init_port_hw()\n instead (also no need for init_hwif_default() call since the setup\n done by it gets over-ridden by ide_init_port_hw() call).\n\n* Drop \u0027initializing\u0027 argument from ide_register_hw().\n\nCc: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nCc: Roman Zippel \u003czippel@linux-m68k.org\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "57c802e84f9c759c3d1794a9dbe81bc10444df62", "tree": "e8774704b3394b12efbb787022cc11b48a13dec0", "parents": [ "8f8e8483f667d79739007b25f0e59a540fb9fa51" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:05 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:05 2008 +0100" }, "message": "ide: add ide_init_port_hw() helper\n\n* Add ide_init_port_hw() helper.\n\n* rapide.c: convert rapide_locate_hwif() to rapide_setup_ports()\n and use ide_init_port_hw().\n\n* ide_platform.c: convert plat_ide_locate_hwif() to plat_ide_setup_ports()\n and use ide_init_port_hw().\n\n* sgiioc4.c: use ide_init_port_hw().\n\n* pmac.c: add \u0027hw_regs_t *hw\u0027 argument to pmac_ide_setup_device(),\n setup \u0027hw\u0027 in pmac_ide_{macio,pci}_attach() and use ide_init_port_hw()\n in pmac_ide_setup_device().\n\nThis patch is a preparation for the future changes in the IDE probing code.\n\nThere should be no functionality changes caused by this patch.\n\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nCc: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nCc: Jeremy Higdon \u003cjeremy@sgi.com\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b0d5bc27ce995adaafbc114b92fa76815025c94e", "tree": "ee3cd3336be0cbb32b9b823bac0a051c0e531c04", "parents": [ "151575e4644f917d3a9f83c777ac3543284954f8" ], "author": { "name": "Olof Johansson", "email": "olof@lixom.net", "time": "Sat Jan 26 20:13:05 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:05 2008 +0100" }, "message": "ide: Fix build break caused by \"ide: remove ideprobe_init()\"\n\nFix build break of powerpc holly_defconfig:\n\nIn file included from arch/powerpc/platforms/embedded6xx/holly.c:24:\ninclude/linux/ide.h:1206: error: \u0027CONFIG_IDE_MAX_HWIFS\u0027 undeclared here (not in a function)\n\nThere\u0027s no need to have a sized array in the prototype, might as well\nturn it into a pointer.\n\nIt could probably be argued that large parts of the include file can be\ncovered under #ifdef CONFIG_IDE, but that\u0027s a larger undertaking.\n\nSigned-off-by: Olof Johansson \u003colof@lixom.net\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "151575e4644f917d3a9f83c777ac3543284954f8", "tree": "766f73e934b270972b5875cc36cbc98e2e3b7469", "parents": [ "71518342bfdfbe508ee325ab5e20984ba2da7de2" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:05 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:05 2008 +0100" }, "message": "ide: remove ideprobe_init()\n\n* Rename ide_device_add() to ide_device_add_all() and make it accept\n \u0027u8 idx[MAX_HWIFS]\u0027 instead of \u0027u8 idx[4]\u0027 as an argument.\n\n* Add ide_device_add() wrapper for ide_device_add_all().\n\n* Convert ide_generic_init() to use ide_device_add_all().\n\n* Remove no longer needed ideprobe_init().\n\nThere should be no functionality changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f01393e48c44e30f7c9a36c8b98a07b0232580fe", "tree": "d585310ef7ee6509285a96b849af2e544e5fea25", "parents": [ "6dd9b8376adbee95ddc321cc83c7f641577e01f6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "message": "ide: merge -\u003efixup and -\u003equirkproc methods\n\n* Assign drive-\u003equirk_list in -\u003equirkproc implementations:\n - hpt366.c::hpt3xx_quirkproc()\n - pdc202xx_new.c::pdcnew_quirkproc()\n - pdc202xx_old.c::pdc202xx_quirkproc()\n\n* Make -\u003equirkproc void.\n\n* Move calling -\u003equirkproc from do_identify() to probe_hwif().\n\n* Convert it821x_fixups() to it821x_quirkproc() in it821x.c.\n\n* Convert siimage_fixup() to sil_quirkproc() in siimage.c, also remove\n no longer needed drive-\u003epresent check from is_dev_seagate_sata().\n\n* Convert ide_undecoded_slave() to accept \u0027drive\u0027 instead of \u0027hwif\u0027\n as an argument. Then convert ide_register_hw() to accept \u0027quirkproc\u0027\n argument instead of \u0027fixup\u0027 one.\n\n* Remove no longer needed -\u003efixup method.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "15ce926ada545cb078711bd9a18c083c93fa01d7", "tree": "9496cda87cae6ef3390c5f350741ad75418dfe8d", "parents": [ "f37aaf9edeba3f4ae10d22aefc09c06af9ea39b6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "message": "ide: merge -\u003edma_host_{on,off} methods into -\u003edma_host_set method\n\nMerge -\u003edma_host_{on,off} methods into -\u003edma_host_set method\nwhich takes \u0027int on\u0027 argument.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4a546e046d562bcd389149591fa5a534c8f832ca", "tree": "ffc5c7bd088a0bf74744721b9cfcf18220a75fdf", "parents": [ "378f577f7f75aa18a0eeafb044a491dcd5aeaa3d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:01 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:01 2008 +0100" }, "message": "ide: remove -\u003eide_dma_on and -\u003edma_off_quietly methods from ide_hwif_t\n\n* Make ide_dma_off_quietly() and __ide_dma_on() always available.\n\n* Drop \"__\" prefix from __ide_dma_on().\n\n* Check for presence of -\u003edma_host_on instead of -\u003eide_dma_on.\n\n* Convert all users of -\u003eide_dma_on and -\u003edma_off_quietly methods\n to use ide_dma_on() and ide_dma_off_quietly() instead.\n\n* Remove no longer needed -\u003eide_dma_on and -\u003edma_off_quietly methods\n from ide_hwif_t.\n\n* Make ide_dma_on() void.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8704de8f296fcf6a4b2ff6bfd9a63974ad909b3e", "tree": "386dccd98e7fc77b0c6b45b999bf474c04851165", "parents": [ "a530201afed5074dac69b29c519a1df59da97945" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:00 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:00 2008 +0100" }, "message": "cy82c693: add -\u003eset_dma_mode method\n\n* Fix SWDMA/MWDMA masks in cy82c693_chipset.\n\n* Add IDE_HFLAG_CY82C693 host flag and use it in ide_tune_dma() to\n check whether the DMA should be enabled even if ide_max_dma_mode()\n fails.\n\n* Convert cy82c693_dma_enable() to become cy82c693_set_dma_mode()\n and remove no longer needed cy82c693_ide_dma_on(). Then set\n IDE_HFLAG_CY82C693 instead of IDE_HFLAG_TRUST_BIOS_FOR_DMA in\n cy82c693_chipset.\n\n* Bump driver version.\n\nAs a result of this patch cy82c693 driver will configure and use DMA on\nall SWDMA0-2 and MWDMA0-2 capable ATA devices instead of relying on BIOS.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "894cdde26b538c77b9943bc72f0570abf6e58e37", "tree": "335f75460bd947c4969c9b7a1ec5764b98bf1d2b", "parents": [ "dab5209cd878c146d9f6923f061d1c2725ff210f" ], "author": { "name": "Hisashi Hifumi", "email": "hifumi.hisashi@oss.ntt.co.jp", "time": "Sat Jan 26 14:11:28 2008 +0100" }, "committer": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Sat Jan 26 14:11:31 2008 +0100" }, "message": "[S390] do local_irq_restore while spinning in spin_lock_irqsave.\n\nIn s390\u0027s spin_lock_irqsave, interrupts remain disabled while\nspinning. In other architectures like x86 and powerpc, interrupts are\nre-enabled while spinning if IRQ is not masked before spin_lock_irqsave\nis called.\n\nThe following patch re-enables interrupts through local_irq_restore\nwhile spinning for a lock acquisition.\nThis can improve system response.\n\n[heiko.carstens@de.ibm.com: removed saving of pc]\n\nSigned-off-by: Hisashi Hifumi \u003chifumi.hisashi@oss.ntt.co.jp\u003e\nSigned-off-by: Heiko Carstens \u003cheiko.carstens@de.ibm.com\u003e\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\n" }, { "commit": "dab5209cd878c146d9f6923f061d1c2725ff210f", "tree": "4b6bae43bc7050c11efb526ad1f535deba95726c", "parents": [ "7dc1da9ffae5a344f7115d019e2be069d3e1bb8d" ], "author": { "name": "Carsten Otte", "email": "cotte@de.ibm.com", "time": "Sat Jan 26 14:11:27 2008 +0100" }, "committer": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Sat Jan 26 14:11:31 2008 +0100" }, "message": "[S390] add smp_call_function_mask\n\nThis patch adds the s390 variant for smp_call_function_mask(). The\nimplementation is pretty straight forward using the wrapper\n__smp_call_function_map() which already takes a cpumask_t argument.\n\nSigned-off-by: Carsten Otte \u003ccotte@de.ibm.com\u003e\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\n" }, { "commit": "028fed8233b669e03def295a4e632b1b933720f9", "tree": "5b8d9f38c2c4d869acf9eaaa29a2835d73f9ad37", "parents": [ "53360fb19672e9ca94d769694a18f46f6e0612a9" ], "author": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Sat Jan 26 14:11:25 2008 +0100" }, "committer": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Sat Jan 26 14:11:29 2008 +0100" }, "message": "[S390] Unused field / extern declaration in processor.h\n\nRemove extern declaration of non-existent last_task_used_math and\nremove unused field error_code from the thread_struct.\n\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\n" }, { "commit": "0ac30be461084f30ad6e22c6b91347e880ed41aa", "tree": "1e157c413e8495ea66700d02d055bfcbe7d4fe71", "parents": [ "ea29ee16e6ea908c830e70516d440828fd9129a8" ], "author": { "name": "Roland McGrath", "email": "roland@redhat.com", "time": "Sat Jan 26 14:11:22 2008 +0100" }, "committer": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Sat Jan 26 14:11:27 2008 +0100" }, "message": "[S390] single-step cleanup\n\nSigned-off-by: Roland McGrath \u003croland@redhat.com\u003e\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\n" }, { "commit": "5800266a7811afeba205e771dcad79023331011b", "tree": "8249a5b4e774a8ae96f2fc0c44b5bc9df978aff1", "parents": [ "c2e3bbac72d5a954bf60c5fabeb7c82ec310035e" ], "author": { "name": "Joe Perches", "email": "joe@perches.com", "time": "Sat Jan 26 14:11:19 2008 +0100" }, "committer": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Sat Jan 26 14:11:25 2008 +0100" }, "message": "[S390] include/asm-s390/: Spelling fixes\n\nSigned-off-by: Joe Perches \u003cjoe@perches.com\u003e\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\n" }, { "commit": "48657d223d403af676696d313b421368f5e2208a", "tree": "dad16da18aae19618375797d8a16ec5fc65b0713", "parents": [ "a2fd64d6aaf498756f700eb1d07818efee046733" ], "author": { "name": "Michael Holzheu", "email": "holzheu@de.ibm.com", "time": "Sat Jan 26 14:11:17 2008 +0100" }, "committer": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Sat Jan 26 14:11:24 2008 +0100" }, "message": "[S390] Use diag308 subcodes 3 and 6 for reboot and dump when possible.\n\nThis patch fixes a problem with the following scenario:\n 1. Linux booted from DASD \"A\"\n 2. Reboot from DASD \"B\" using \"/sys/firmware/reipl/ccw/device\"\n 3. Reboot DASD \"B\"\nWithout this patch in step 3 on newer s390 systems under LPAR instead of\nDASD \"B\", DASD \"A\" will be booted. The reason is that in step 2 we use CCW\nreipl and in step 3 we use DIAG308 (subcode 3) reipl. DIAG308 does not\nnotice the CCW reipl and still thinks that it has to reboot DASD \"A\".\nBefore applying this fix, ensure to have MCF RJ9967101E or z9 GA3 base driver\ninstalled.\n\nSigned-off-by: Michael Holzheu \u003cholzheu@de.ibm.com\u003e\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\n" }, { "commit": "99ca4e582d4a4088969681efff97be44d98421a1", "tree": "f6478bcdc30d84cc6f67485bd78c9ba54827e07e", "parents": [ "ceb3dfbae1d3faacaedfc64c913fd18cd3624f72" ], "author": { "name": "Michael Holzheu", "email": "holzheu@de.ibm.com", "time": "Sat Jan 26 14:11:11 2008 +0100" }, "committer": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Sat Jan 26 14:11:19 2008 +0100" }, "message": "[S390] kernel: Shutdown Actions Interface\n\nIn case of a kernel panic it is currently possible to specify that a dump\nshould be created, the system should be rebooted or stopped. Virtual sysfs\nfiles under the directory /sys/firmware/ are used for that configuration.\nIn addition to that, there are kernel parameters \u0027vmhalt\u0027, \u0027vmpoff\u0027\nand \u0027vmpanic\u0027, which can be used to specify z/VM commands, which are\nautomatically executed in case of halt, power off or a kernel panic.\nThis patch combines both functionalities and allows to specify the z/VM CP\ncommands also via sysfs attributes. In addition to that, it enhances the\nexisting handling of shutdown triggers (e.g. halt or panic) and associated\nshutdown actions (e.g. dump or reipl) and makes it more flexible.\n\nSigned-off-by: Michael Holzheu \u003cholzheu@de.ibm.com\u003e\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\n" }, { "commit": "48483b3290988952a593c6e66ca354c19f1a4350", "tree": "b2b11f14a2ca1a49fe61752064c8897d478536fb", "parents": [ "519580fc179be6d06a40edd918747bd5f0e1b899" ], "author": { "name": "Heiko Carstens", "email": "heiko.carstens@de.ibm.com", "time": "Sat Jan 26 14:11:05 2008 +0100" }, "committer": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Sat Jan 26 14:11:15 2008 +0100" }, "message": "[S390] Get rid of additional_cpus kernel parameter.\n\nIt caused only a lot of confusion. From now on cpu hotplug of up to\nNR_CPUS will work by default. If somebody wants to limit that then\nthe possible_cpus parameter can be used.\n\nSigned-off-by: Heiko Carstens \u003cheiko.carstens@de.ibm.com\u003e\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\n" }, { "commit": "519580fc179be6d06a40edd918747bd5f0e1b899", "tree": "d5afcd9df67fcc63b32a27a8c090c3ced63582b6", "parents": [ "3b4beb31759765efdda9f9431aebfedf828bbfe0" ], "author": { "name": "Heiko Carstens", "email": "heiko.carstens@de.ibm.com", "time": "Sat Jan 26 14:11:04 2008 +0100" }, "committer": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Sat Jan 26 14:11:15 2008 +0100" }, "message": "[S390] Use new style spinlock initializer in __RWSEM_INITIALIZER.\n\nSigned-off-by: Heiko Carstens \u003cheiko.carstens@de.ibm.com\u003e\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\n" }, { "commit": "3b4beb31759765efdda9f9431aebfedf828bbfe0", "tree": "9d8a7de6c484f8f2bbda874f41ebcad4af7c9d53", "parents": [ "9f4b0ba81f158df459fa2cfc98ab1475c090f29c" ], "author": { "name": "Heiko Carstens", "email": "heiko.carstens@de.ibm.com", "time": "Sat Jan 26 14:11:03 2008 +0100" }, "committer": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Sat Jan 26 14:11:14 2008 +0100" }, "message": "[S390] Remove owner_pc member from raw_spinlock_t.\n\nUsed to contain the address of the holder of the lock. But since the\nspinlock code is not inlined anymore all locks contain the same address\nanyway. And since in addtition nobody complained about that for ages\nits obviously unused. So remove it.\n\nSigned-off-by: Heiko Carstens \u003cheiko.carstens@de.ibm.com\u003e\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\n" }, { "commit": "5fd9c6e214547a32d3da6ee4284c79004d667bc8", "tree": "def2e218393c9867e9db939f1d379c005895a912", "parents": [ "8ffd74a0924e4e04f6455eb2d2187a9564678d01" ], "author": { "name": "Christian Borntraeger", "email": "borntraeger@de.ibm.com", "time": "Sat Jan 26 14:11:00 2008 +0100" }, "committer": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Sat Jan 26 14:11:12 2008 +0100" }, "message": "[S390] Change vmalloc defintions\n\nCurrently the vmalloc area starts at a dynamic address depending on\nthe memory size. There was also an 8MB security hole after the\nphysical memory to catch out-of-bounds accesses.\nWe can simplify the code by putting the vmalloc area explicitely at\nthe top of the kernel mapping and setting the vmalloc size to a fixed\nvalue of 128MB/128GB for 31bit/64bit systems. Part of the vmalloc\narea will be used for the vmem_map. This leaves an area of 96MB/1GB\nfor normal vmalloc allocations.\n\nSigned-off-by: Christian Borntraeger \u003cborntraeger@de.ibm.com\u003e\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\n" }, { "commit": "8ffd74a0924e4e04f6455eb2d2187a9564678d01", "tree": "74c6787457091ab86ed5a18d39b7614c3c9e686d", "parents": [ "6f457e1a149eb39ee58d51913e8023fc27c52806" ], "author": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Sat Jan 26 14:10:59 2008 +0100" }, "committer": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Sat Jan 26 14:11:11 2008 +0100" }, "message": "[S390] Avoid warnings in tlblush.h\n\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\n" }, { "commit": "6f457e1a149eb39ee58d51913e8023fc27c52806", "tree": "d702ec38780667a3305e45df05c4f7df3730e9f6", "parents": [ "4b28a8fe78bd593cdc4454cf28af71ca9556914d" ], "author": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Sat Jan 26 14:10:58 2008 +0100" }, "committer": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Sat Jan 26 14:11:10 2008 +0100" }, "message": "[S390] Fix tlb flushing with idte.\n\nThe clear-by-asce operation of the idte instruction gets an asce\n(address-space-control-element) as argument to specify which TLBs\nneed to get flushed. The current code passes a plain pointer to\nthe start of the pgd without the additional bits which would make\nthe pointer an asce. The current machines don\u0027t mind the difference\nbut a future model might want to use the designation type control\nbits in the asce as a filter for the TLBs to flush.\n\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\n" }, { "commit": "08d07968277cd898c88bf12b7720d89c02c4f139", "tree": "1c91768976c389883842eb7650141e93b7dbe334", "parents": [ "c05ffc4f2b208da8ba7d3a9b5ab886c76f8939b5" ], "author": { "name": "Heiko Carstens", "email": "heiko.carstens@de.ibm.com", "time": "Sat Jan 26 14:10:56 2008 +0100" }, "committer": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Sat Jan 26 14:11:09 2008 +0100" }, "message": "[S390] Standby cpu activation/deactivation.\n\nAdd a new interface so that cpus can be put into standby state and\nconfigured state.\nOnly offline cpus can be put into standby state or configured state.\nFor that the new percpu sysfs attribute \"configure\" must be used.\nTo put a cpu in standby state a \"0\" must be written to the attribute.\nIn order to switch it into configured state a \"1\" must be written to\nthe attribute.\nOnly cpus in configured state can be brought online.\nIn addition this patch introduces a static mapping of physical to\nlogical cpus. As a result only the sysfs directories of present cpus\nwill be created. To scan for new cpus the new sysfs attribute \"rescan\"\nmust be used.\nWriting to /sys/devices/system/cpu/rescan will trigger a rescan of\ncpus and will create directories for new cpus.\n\nOn IPL only configured cpus will be used. And on reboot/shutdown all\ncpus will remain in their current state (configured/standby).\n\nSigned-off-by: Heiko Carstens \u003cheiko.carstens@de.ibm.com\u003e\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\n" }, { "commit": "4e8e56c6713398f417317d449f50c08bf2756c66", "tree": "61c87e58f13faa93de725120cedb2540f058ae32", "parents": [ "cd6b4f27b9bb2a6a5ec82b96b87c85421257be6c" ], "author": { "name": "Peter Oberparleiter", "email": "peter.oberparleiter@de.ibm.com", "time": "Sat Jan 26 14:10:44 2008 +0100" }, "committer": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Sat Jan 26 14:11:00 2008 +0100" }, "message": "[S390] cio: Extend adapter interrupt interface.\n\nFrom: Cornelia Huck \u003ccornelia.huck@de.ibm.com\u003e\n\nChange the adapter interrupt interface in order to allow multiple\nadapter interrupt handlers to be registered. Indicators are now\nallocated by cio instead of the device driver.\n\nThe qdio parts have been\nAcked-by: Ursula Braun \u003cubraun@linux.vnet.ibm.com\u003e\n\nSigned-off-by: Peter Oberparleiter \u003cpeter.oberparleiter@de.ibm.com\u003e\nSigned-off-by: Cornelia Huck \u003ccornelia.huck@de.ibm.com\u003e\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\n" }, { "commit": "9b73e76f3cf63379dcf45fcd4f112f5812418d0a", "tree": "4e6bef87cd0cd6d848fc39a5ae25b981dbbe035b", "parents": [ "50d9a126240f9961cfdd063336bbeb91f77a7dce", "23c3e290fb9ce38cabc2822b47583fc8702411bf" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 17:19:08 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 17:19:08 2008 -0800" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (200 commits)\n [SCSI] usbstorage: use last_sector_bug flag universally\n [SCSI] libsas: abstract STP task status into a function\n [SCSI] ultrastor: clean up inline asm warnings\n [SCSI] aic7xxx: fix firmware build\n [SCSI] aacraid: fib context lock for management ioctls\n [SCSI] ch: remove forward declarations\n [SCSI] ch: fix device minor number management bug\n [SCSI] ch: handle class_device_create failure properly\n [SCSI] NCR5380: fix section mismatch\n [SCSI] sg: fix /proc/scsi/sg/devices when no SCSI devices\n [SCSI] IB/iSER: add logical unit reset support\n [SCSI] don\u0027t use __GFP_DMA for sense buffers if not required\n [SCSI] use dynamically allocated sense buffer\n [SCSI] scsi.h: add macro for enclosure bit of inquiry data\n [SCSI] sd: add fix for devices with last sector access problems\n [SCSI] fix pcmcia compile problem\n [SCSI] aacraid: add Voodoo Lite class of cards.\n [SCSI] aacraid: add new driver features flags\n [SCSI] qla2xxx: Update version number to 8.02.00-k7.\n [SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command.\n ...\n" }, { "commit": "29bd17af7d8ffc16bb5eb286947495c166ea826e", "tree": "5c20c44b51bdb3573949d1dc23bc3d3927d759fa", "parents": [ "2ba14a017a4ba8d2266316f481d4ad7400073d18", "2fe5c1d7eb88830b09c863a4b5b3279dc120f3af" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 17:11:13 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 17:11:13 2008 -0800" }, "message": "Merge branch \u0027upstream-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2\n\n* \u0027upstream-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (31 commits)\n ocfs2: clean up bh null checks\n ocfs2: document access rules for blocked_lock_list\n configfs: file.c fix possible recursive locking\n configfs: dir.c fix possible recursive locking\n configfs: Remove EXPERIMENTAL\n ocfs2: bump version number\n ocfs2/dlm: Clear joining_node on hearbeat node down\n ocfs2: convert byte order of constant instead of variable\n ocfs2: Update default cluster timeouts\n ocfs2: printf fixes\n ocfs2: Use generic_file_llseek\n ocfs2: Safer read_inline_data()\n ocfs2: Silence false lockdep warnings\n [PATCH 2/2] ocfs2: cluster aware flock()\n [PATCH 1/2] ocfs2: add flock lock type\n ocfs2: Local alloc window size changeable via mount option\n ocfs2: Support commit\u003d mount option\n ocfs2: Add missing permission checks\n [PATCH 2/2] ocfs2: Implement group add for online resize\n [PATCH 1/2] ocfs2: Add group extend for online resize\n ...\n" }, { "commit": "2ba14a017a4ba8d2266316f481d4ad7400073d18", "tree": "6e86dcbbb7898eb747f1198e33961eb68bfcdb4d", "parents": [ "99f1c97dbdb30e958edfd1ced0ae43df62504e07", "a984f58dd97f22f5113700322fed311a0ee29947" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 17:08:28 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 17:08:28 2008 -0800" }, "message": "Merge branch \u0027upstream-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev\n\n* \u0027upstream-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (67 commits)\n fix drivers/ata/sata_fsl.c double-decl\n [libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof()\n pata_legacy: Merge winbond support\n ata_generic: Cenatek support\n pata_winbond: error return\n pata_serverworks: Fix cable types and cosmetics\n pata_mpc52xx: remove un-needed assignment\n libata: fix off-by-one in error categorization\n ahci: factor out AHCI enabling and enable AHCI before reading CAP\n ata_piix: implement SIDPR SCR access\n ata_piix: convert to prepare - activate initialization\n libata: factor out ata_pci_activate_sff_host() from ata_pci_one()\n [libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof()\n pata_legacy: resychronize with upstream changes and resubmit\n [libata] pata_legacy: typo fix\n [libata] pata_winbond: update for new -\u003edata_xfer hook\n pata_pcmcia: convert to new data_xfer prototype\n libata annotations and fixes\n libata: use dev_driver_string() instead of \"libata\" in libata-sff.c\n ata_piix: kill unused constants and flags\n ...\n" }, { "commit": "d69a3ad6a0e47b2aa9b2b2ddfd385752132a4d34", "tree": "8e4a3283e9ce892217f69b1066d7933908652b00", "parents": [ "e63aecb651ba73dffc62f9608ee1b7ae2a0ffd4b" ], "author": { "name": "Joel Becker", "email": "joel.becker@oracle.com", "time": "Fri Oct 05 14:31:44 2007 -0700" }, "committer": { "name": "Mark Fasheh", "email": "mark.fasheh@oracle.com", "time": "Fri Jan 25 14:46:04 2008 -0800" }, "message": "dlm: Split lock mode and flag constants into a sharable header.\n\nThis allows others to use the DLM constants without being tied to the\nfunction API of fs/dlm.\n\nSigned-off-by: Joel Becker \u003cjoel.becker@oracle.com\u003e\nSigned-off-by: Steven Whitehouse \u003cswhiteho@redhat.com\u003e\nSigned-off-by: David Teigland \u003cteigland@redhat.com\u003e\nSigned-off-by: Mark Fasheh \u003cmark.fasheh@oracle.com\u003e\n" }, { "commit": "99f1c97dbdb30e958edfd1ced0ae43df62504e07", "tree": "cc61393c912b3c1b095a9c74322f8e1364ab9b3a", "parents": [ "b31fde6db2b76a9f7f59bf016652b46cff43f8da", "8176d297c73a06e6076c9c31f6404047567f6324" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 14:41:24 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 14:41:24 2008 -0800" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (81 commits)\n RDMA/cxgb3: Fix the T3A workaround checks\n IB/ipath: Remove unnecessary cast\n IPoIB: Constify seq_operations function pointer tables\n RDMA/cxgb3: Mark QP as privileged based on user capabilities\n RDMA/cxgb3: Fix page shift calculation in build_phys_page_list()\n RDMA/cxgb3: Flush the receive queue when closing\n IB/ipath: Trivial simplification of ipath_make_ud_req()\n IB/mthca: Update latest \"native Arbel\" firmware revision\n IPoIB: Remove redundant check of netif_queue_stopped() in xmit handler\n IB/ipath: Add mappings from HW register to PortInfo port physical state\n IB/ipath: Changes to support PIO bandwidth check on IBA7220\n IB/ipath: Minor cleanup of unused fields and chip-specific errors\n IB/ipath: New sysfs entries to control 7220 features\n IB/ipath: Add new chip-specific functions to older chips, consistent init\n IB/ipath: Remove unused MDIO interface code\n IB/ehca: Prevent RDMA-related connection failures on some eHCA2 hardware\n IB/ehca: Add \"port connection autodetect mode\"\n IB/ehca: Define array to store SMI/GSI QPs\n IB/ehca: Remove CQ-QP-link before destroying QP in error path of create_qp()\n IB/iser: Add change_queue_depth method\n ...\n" }, { "commit": "a9e527e3f9f4510e9f3450ca3bc51bc3ef2854fd", "tree": "519458581cf3b8dd7c7a6d19c29572efb3405df1", "parents": [ "755807a296f77ca7c31dc000afdfe1e5172bbf72" ], "author": { "name": "Rolf Manderscheid", "email": "rvm@obsidianresearch.com", "time": "Mon Dec 10 13:38:41 2007 -0700" }, "committer": { "name": "Roland Dreier", "email": "rolandd@cisco.com", "time": "Fri Jan 25 14:15:37 2008 -0800" }, "message": "IPoIB: improve IPv4/IPv6 to IB mcast mapping functions\n\nAn IPoIB subnet on an IB fabric that spans multiple IB subnets can\u0027t\nuse link-local scope in multicast GIDs. The existing routines that\nmap IP/IPv6 multicast addresses into IB link-level addresses hard-code\nthe scope to link-local, and they also leave the partition key field\nuninitialised. This patch adds a parameter (the link-level broadcast\naddress) to the mapping routines, allowing them to initialise both the\nscope and the P_Key appropriately, and fixes up the call sites.\n\nThe next step will be to add a way to configure the scope for an IPoIB\ninterface.\n\nSigned-off-by: Rolf Manderscheid \u003crvm@obsidianresearch.com\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n" }, { "commit": "88314e4dda1e158aabce76429ef4d017b48f8b92", "tree": "951aad1d512d0ac0fce5bfd6189e7ed1fbd84e71", "parents": [ "45d9478da106c749203056f56e94d0e370dfac87" ], "author": { "name": "Sean Hefty", "email": "sean.hefty@intel.com", "time": "Wed Nov 14 00:29:50 2007 -0800" }, "committer": { "name": "Roland Dreier", "email": "rolandd@cisco.com", "time": "Fri Jan 25 14:15:32 2008 -0800" }, "message": "RDMA/cma: add support for rdma_migrate_id() \n\nThis is based on user feedback from Doug Ledford at RedHat:\n\nEvents that occur on an rdma_cm_id are reported to userspace through an\nevent channel. Connection request events are reported on the event\nchannel associated with the listen. When the connection is accepted, a\nnew rdma_cm_id is created and automatically uses the listen event\nchannel. This is suboptimal where the user only wants listen events on\nthat channel.\n\nAdditionally, it may be desirable to have events related to connection\nestablishment use a different event channel than those related to\nalready established connections.\n\nAllow the user to migrate an rdma_cm_id between event channels. All\npending events associated with the rdma_cm_id are moved to the new event\nchannel.\n\nSigned-off-by: Sean Hefty \u003csean.hefty@intel.com\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n" }, { "commit": "4fc8cd4919428f9b86f0b65e2f3245a1c186737f", "tree": "07bca41da2be7504e6d17745fb86264e59a4958e", "parents": [ "547af76521b3fd4b9ec5c9a9975a17eadb95e6f6" ], "author": { "name": "Sean Hefty", "email": "sean.hefty@intel.com", "time": "Tue Nov 27 00:11:04 2007 -0800" }, "committer": { "name": "Roland Dreier", "email": "rolandd@cisco.com", "time": "Fri Jan 25 14:15:30 2008 -0800" }, "message": "IB/mad: Report number of times a mad was retried\n\nTo allow ULPs to tune timeout values and capture retry statistics,\nreport the number of times that a mad send operation was retried.\n\nFor RMPP mads, report the total number of times that the any portion\n(send window) of the send operation was retried.\n\nSigned-off-by: Sean Hefty \u003csean.hefty@intel.com\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n" }, { "commit": "b31fde6db2b76a9f7f59bf016652b46cff43f8da", "tree": "2af4c48ae97b9800604fc0b36bc5c274d46d4aa3", "parents": [ "f31c338675872875e24f124af0689131b0c72600", "a999337b49fcdd2c4a475e97e4b8337ebdfa4abf" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 13:59:51 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 13:59:51 2008 -0800" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (509 commits)\n V4L/DVB (7078): radio: fix sf16fmi section mismatch\n V4L/DVB (7077): bt878: remove handcrafted PCI subsystem ID check\n V4L/DVB (7075): Make a local function static\n V4L/DVB (7074): DiB7000P: correct tuning problem for 7MHz channel\n V4L/DVB (7073): DiB7070: Reception quality improved\n V4L/DVB (7072): sets the MT2060 IF1 frequency according to EEPROM\n V4L/DVB (7071): DiB0700: Start streaming the right way\n V4L/DVB (7070): Fix some tuning problems\n V4L/DVB (7069): Support for myTV.t\n V4L/DVB (7068): Add support for WinTV Nova-T-CE driver\n V4L/DVB (7067): fix autoserach in the Hauppauge NOVA-T 500\n V4L/DVB (7066): ASUS My Cinema U3000 Mini DVBT Tuner\n V4L/DVB (7065): Artec T14BR patches\n V4L/DVB (7063): xc5000: Fix OOPS caused by missing firmware\n V4L/DVB (7062): radio-si570x: Some fixes and new USB ID addition\n V4L/DVB (7061): radio-si470x: Some cleanups\n V4L/DVB (7060): em28xx: remove has_tuner\n V4L/DVB (7059): cx88: Ensure the tuner is reset correctly\n V4L/DVB (7058): IR corrections for the Pinnacle 800i\n V4L/DVB (7056): tuner: suppress obsolete tuner i2c address warning for XC5000 tuners\n ...\n" }, { "commit": "f31c338675872875e24f124af0689131b0c72600", "tree": "cf12b28d52da1675ab32871abd2db455ffbfe920", "parents": [ "0008bf54408d4c0637c24d34642f1038c299be95", "61a368c216897aa3bbee35b3f2e6db76ec73fad0" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 13:57:26 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jan 25 13:57:26 2008 -0800" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (67 commits)\n ide: remove redundant DMA blacklist check from __ide_dma_on()\n ide: cleanup ide_set_dma()\n ide: remove redundant -\u003eide_dma_on call from set_using_dma()\n sc1200: move DMA timings to timing tables\n ide: add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag\n sis5513: factor out UDMA programming code\n pdc202xx_new: move PIO programming code to pdcnew_set_pio_mode()\n ide: make \u0027extra\u0027 field in struct ide_port_info u8\n ide: kill duplicate code in ide_dump_{ata,atapi}_status()\n ide-disk: use ide_get_lba_addr()\n ide: printk fix\n ide: add ide_tf_read() helper\n ide: fix registers loading order in ide_dump_ata_status()\n ide-disk: use do_rw_taskfile() (take 2)\n ide-disk: add ide_tf_set_cmd() helper\n ide-disk: extend timeout for PIO-in commands\n ide: remove \u0027handler\u0027 field from ide_task_t (take 2)\n ide: use -\u003edata_phase to set -\u003ehandler in do_rw_taskfile()\n ide: convert do_rw_taskfile() to use -\u003edata_phase\n ide: merge flagged_taskfile() into do_rw_taskfile()\n ...\n" }, { "commit": "4db90a145292327b95b03f6dcd3352327235cc36", "tree": "c48ba5fc31e27d6fbdb8883151bdf237e7eb1920", "parents": [ "428c6440ef933a3d9df5adfeb2cbb3ea7ebb6a68" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:18 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:18 2008 +0100" }, "message": "ide: add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag\n\n* Add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag and use it to decide\n what to do with transfer modes \u003c XFER_PIO_0 in ide_set_xfer_rate().\n\n* Set IDE_HFLAG_ABUSE_SET_DMA_MODE in host drivers that need it\n (aec62xx, amd74xx, cs5520, cs5535, hpt34x, hpt366, pdc202xx_old,\n serverworks, tc86c001 and via82cxxx) and cleanup -\u003eset_dma_mode\n methods in host drivers that don\u0027t (IDE core code guarantees that\n -\u003eset_dma_mode will be called only for modes which are present\n in SWDMA/MWDMA/UDMA masks).\n\nWhile at it:\n\n* Add IDE_HFLAGS_HPT34X/HPT3XX/PDC202XX/SVWKS define in\n hpt34x/hpt366/pdc202xx_old/serverworks host driver.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "3071a9d00b8684899d93f368e670c4de0293df29", "tree": "1fd259817ea0e513ff7db73c21309b5d97819da5", "parents": [ "e62925dd26ef9594b8e4b9380b3211f6dae4ab96" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:17 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:17 2008 +0100" }, "message": "ide: make \u0027extra\u0027 field in struct ide_port_info u8\n\nThe maximum value used currently for \u0027extra\u0027 field in struct ide_port_info\nis 240.\n\nMake \u0027extra\u0027 u8 so it packs nicely together with enablebits[] and \u0027chipset\u0027\nfields (ide_pci_enablebit_t is 3 bytes and hwif_chipset_t is 1 byte).\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "a501633c7d44087e806597d3a213d735346edd51", "tree": "b82d583f6e29beae7943860b01a0303985d197ea", "parents": [ "1c904fcfbb0d8eef92ef42b1da378b4714143e46" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:17 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:17 2008 +0100" }, "message": "ide-disk: use ide_get_lba_addr()\n\n* Export ide_get_lba_addr().\n\n* Convert idedisk_{read_native,set}_max_address() to use ide_get_lba_addr().\n\n* Remove incorrect comment from idedisk_read_native_max_address()\n (noticed by Sergei).\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c2b57cdc1d2976444d451a2a2e43e11b61ed0638", "tree": "f322e4d494d9688afd319fbe88afd6a526bb0154", "parents": [ "d32444771b154c3ec37ebf6439004653560c2411" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:17 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:17 2008 +0100" }, "message": "ide: add ide_tf_read() helper\n\n* Factor out code reading taskfile registers from ide_end_drive_cmd()\n to the new ide_tf_read() helper.\n\n* Add IDE_TFLAG_IN_* taskfile flags to indicate the need to load\n particular IDE taskfile register in ide_tf_read().\n\n* Update ide_end_drive_cmd() to set respective IDE_TFLAG_IN_* taksfile flags.\n\n* Add ide_get_lba_addr() for getting LBA sector address from taskfile struct.\n\n* Factor out code getting sector address from ide_dump_ata_status()\n to the new ide_dump_sector() function.\n\n* Convert ide_dump_sector() to use ide_tf_read() and ide_get_lba_addr().\n\n* Remove no longer needed ide_read_24().\n\nThe only change in functionality caused by this patch is that\nide_dump_ata_status() no longer prints \"high\"/\"low\" parts of LBA48\nsector address (of course LBA48 sector address is still printed).\n\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f6e29e35cc0f9facf2eb0b0454f9b09021b5aa6f", "tree": "66f022af5e3b1a7ef5a0854c684604b6d2b64a9c", "parents": [ "ba76ae3883ad9faa32a6b35271c6a407d6c96ca9" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:16 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:16 2008 +0100" }, "message": "ide-disk: use do_rw_taskfile() (take 2)\n\n* Add IDE_TFLAG_DMA_PIO_FALLBACK taskfile flag to indicate the need\n to skip loading taskfile registers in do_rw_taskfile().\n\n* Export do_rw_taskfile().\n\n* Convert __ide_do_rw_disk() to use do_rw_taskfile().\n\n* Unexport ide_tf_load().\n\n* Unexport {pre_task_out,task_in}_intr() and make it static.\n\n* Remove incorrect comment about do_rw_taskfile() from \u003clinux/ide.h\u003e.\n\nThere should be no functionality changes caused by this patch.\n\nv2:\n* Add missing blk_fs_request() check to task_dma_ok() (for VDMA).\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "57d7366b78b74a9eef873e8212c03d8c2033a764", "tree": "5b3cefe3c08e765bf83050ddaf21e98b15f7949d", "parents": [ "1192e528e064ebb9a578219731d2b0f78ca3c1ec" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:16 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:16 2008 +0100" }, "message": "ide: remove \u0027handler\u0027 field from ide_task_t (take 2)\n\n* Add IDE_TFLAG_CUSTOM_HANDLER taskfile flag and use it for internal requests\n which require custom handlers. Check the flag in do_rw_taskfile() and set\n handler accordingly.\n\n* Cleanup ide_init_{specify,restore,setmult}_cmd() and rename it to\n ide_tf_set_{specify,restore,setmult}_cmd().\n\n* Make {set_geometry,recal,set_multmode}_intr() static.\n\n* Remove no longer needed \u0027handler\u0027 field from ide_task_t.\n\nv2:\n* \u0027handler\u0027 in do_rw_taskfile() must be set to NULL initially.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1192e528e064ebb9a578219731d2b0f78ca3c1ec", "tree": "d220412f152337618cbb19dac35c98016258e9b8", "parents": [ "10d90157c83d4b6743c9063c36f9e7f27aa254b6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:16 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:16 2008 +0100" }, "message": "ide: use -\u003edata_phase to set -\u003ehandler in do_rw_taskfile()\n\n* Use -\u003edata_phase to set -\u003ehandler in do_rw_taskfile() instead of\n setting -\u003ehandler in callers of ide_raw_taskfile()/do_rw_taskfile().\n\n* Unexport task_no_data_intr() and make it static.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "10d90157c83d4b6743c9063c36f9e7f27aa254b6", "tree": "e4dd04ba916fee294629f7f6354d241f4f9b0619", "parents": [ "1edee60e9d994f2b9a79b1333be39790683541fe" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:16 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:16 2008 +0100" }, "message": "ide: convert do_rw_taskfile() to use -\u003edata_phase\n\n* Use task-\u003edata_phase in do_rw_taskfile() to decide what to do.\n\n* task-\u003eprehandler is only used by TASKFILE[_MULTI]_OUT so just\n use pre_task_out_intr() directly and remove no longer needed\n \u0027prehandler\u0027 field from ide_task_t.\n\n* Remove no longer needed ide_pre_handler_t type.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1edee60e9d994f2b9a79b1333be39790683541fe", "tree": "f180358d478d5f9366267afd8c9ff2104a2cb930", "parents": [ "a7bbd20b50fb12b3a604c396b3d8a3449a43edcc" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:15 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:15 2008 +0100" }, "message": "ide: merge flagged_taskfile() into do_rw_taskfile()\n\nBased on the earlier work by Tejun Heo.\n\ntask-\u003edata_phase \u003d\u003d TASKFILE_MULTI_{IN,OUT} vs drive-\u003emult_count \u003d\u003d 0\ncheck is needed also for ide_taskfile_ioctl() requests that don\u0027t have\nIDE_TFLAG_FLAGGED taskfile flag set.\n\nCc: Tejun Heo \u003chtejun@gmail.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "866e2ec9ce525de0e7c10d02ead8d85af27adffd", "tree": "a8bdbcd6405bc9eb5aecaeb68fdcf899e205401c", "parents": [ "ac026ff254b32915bb14ba97a23b4019d137f181" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:14 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:14 2008 +0100" }, "message": "ide: remove \u0027tf_in_flags\u0027 field from ide_task_t\n\n* Add IDE_TFLAG_IN_DATA taskfile flag to indicate the need of reading\n IDE_DATA_REG in ide_end_drive_cmd().\n\n Set the new flag in ide_taskfile_ioctl() if -\u003ein_flags.b.data is set.\n\n* Add IDE_TFLAG_FLAGGED_SET_IN_FLAGS taskfile flag to indicate the\n need of modifying -\u003ein_flags in ide_taskfile_ioctl().\n\n Set the new flag in flagged_taskfile() and move the code modifying\n -\u003etf_in_flags to ide_taskfile_ioctl().\n\n While at it remove the bogus comment: -\u003etf_in_flags (except .b.data)\n have no effect on selection of registers to read.\n\n* Remove no longer needed \u0027tf_in_flags\u0027 field from ide_task_t.\n\nAs the result we finally have the internals of HDIO_DRIVE_TASKFILE ioctl\nseparated from the core IDE code.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ac026ff254b32915bb14ba97a23b4019d137f181", "tree": "ab5687be210c4016d16fae7a8e51bfc1c41c4c42", "parents": [ "7299a3918442dc9a5abb71b9f65b1dd17637c8c0" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:14 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:14 2008 +0100" }, "message": "ide: remove \u0027command_type\u0027 field from ide_task_t\n\n* Add \u0027data_buf\u0027 and \u0027nsect\u0027 variables in ide_taskfile_ioctl()\n to cache data buffer pointer and number of sectors to transfer\n (this allows us to have only one ide_diag_taskfile() call).\n\n* Add IDE_TFLAG_WRITE taskfile flag and use it to check whether\n the REQ_RW request flag should be set.\n\n* Move -\u003ecommand_type handling from ide_diag_taskfile() to\n ide_taskfile_ioctl() and use -\u003ereq_cmd instead of -\u003ecommand_type.\n\n* Add \u0027nsect\u0027 parameter to ide_raw_taskfile().\n\n* Merge ide_diag_taskfile() into ide_raw_taskfile().\n\n* Initialize -\u003edata_phase explicitly in idedisk_prepare_flush(),\n ide_start_power_step() and ide_disk_special().\n\n* Remove no longer needed \u0027command_type\u0027 field from ide_task_t.\n\n* Add #ifndef/#endif __KERNEL__ to \u003clinux/hdreg.h\u003e around no\n longer used by kernel IDE_DRIVE_TASK_* and TASKFILE_* defines.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "7299a3918442dc9a5abb71b9f65b1dd17637c8c0", "tree": "50ace6bed3d1cc73a184270743d5c5d46ab4f2c7", "parents": [ "f919790f8c929ab1b392ad1a0c2e1b53337b5071" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:14 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:14 2008 +0100" }, "message": "ide: remove hwif-\u003eintrproc\n\nGiven that:\n\n* hpt366.c::hpt3xx_intrproc() is the only user of hwif-\u003eintrproc\n\n* hpt366.c::hpt3xx_quirkproc() sets drive-\u003equirk_list to 1 for quirky drives\n which is a value unique to hpt366 host driver\n\nwe can remove hwif-\u003eintproc and just check for drive-\u003equirk_list \u003d\u003d 1\nin ide_do_request().\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f919790f8c929ab1b392ad1a0c2e1b53337b5071", "tree": "3b81af4512e5e4232af74f1bb1df6ede9a19a5fb", "parents": [ "cd3dbc99da337f2130f3cb2691fbb65c8bf22337" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:13 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:13 2008 +0100" }, "message": "ide: remove SELECT_INTERRUPT()\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "cd3dbc99da337f2130f3cb2691fbb65c8bf22337", "tree": "c50ae590f17dc7f68d884b0f02c09c860c76c0e3", "parents": [ "2fc573881957337c4ea1c84b92d2f27d076cad57" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:13 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:13 2008 +0100" }, "message": "ide: remove QUIRK_LIST()\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2fc573881957337c4ea1c84b92d2f27d076cad57", "tree": "790726063934a7ea8c384f2314d44bc03b22f779", "parents": [ "932aead6d21b631b2058255981824008a6eae32e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:13 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:13 2008 +0100" }, "message": "ide: add ide_pktcmd_tf_load() helper\n\nAdd ide_pktcmd_tf_load() helper and convert ATAPI device drivers to use it.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8e7657ae0f56c14882e53ffdae8055c2b1624de1", "tree": "93e8fbbf66d0a9f877b13d4534c6052713f3a268", "parents": [ "790d1239898d4f893112280decd344d90f43ee96" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:12 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:12 2008 +0100" }, "message": "ide: remove atapi_ireason_t (take 3)\n\nRemove atapi_ireason_t.\n\nWhile at it:\n* replace \u0027HWIF(drive)\u0027 by \u0027drive-\u003ehwif\u0027 (or just \u0027hwif\u0027 where possible)\n\nv2:\n* v1 had CD and IO bits reversed in many places.\n\n* Use CD and IO defines from \u003clinux/hdreg.h\u003e.\n\nv3:\n* Fix incorrect \"(ireason \u0026 IO) \u003d\u003d test_bit()\". (Noticed by Sergei)\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "790d1239898d4f893112280decd344d90f43ee96", "tree": "a8ed2d8fedc4d62b28249d84db4c2904f738cbb3", "parents": [ "e5f9f5a89a01abc2b9c09747452aeb9218d6bffd" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:12 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:12 2008 +0100" }, "message": "ide: remove ata_nsector_t, ata_data_t and atapi_bcount_t\n\nRemove ata_nsector_t, ata_data_t (unused) and atapi_bcount_t.\n\nWhile at it:\n* replace \u0027HWIF(drive)\u0027 by \u0027hwif\u0027\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "e5f9f5a89a01abc2b9c09747452aeb9218d6bffd", "tree": "6a09f9be2ccbc27ef0baf0001719a70240c02537", "parents": [ "0e38a66a1e69821ab57a06d5a7b11f0df9275bf4" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:12 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:12 2008 +0100" }, "message": "ide: remove atapi_feature_t\n\nRemove atapi_feature_t.\n\nWhile at it:\n* replace \u0027HWIF(drive)\u0027 by \u0027hwif\u0027\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "0e38a66a1e69821ab57a06d5a7b11f0df9275bf4", "tree": "e287752203edfe30f3bdc5966eb8f4c91b508c45", "parents": [ "22c525b976778cce5bb6f8fdcc70046168c54b1a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:12 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:12 2008 +0100" }, "message": "ide: remove atapi_error_t (take 2)\n\nRemove atapi_error_t.\n\nWhile at it:\n* replace \u0027HWIF(drive)\u0027 by \u0027drive-\u003ehwif\u0027\n\nv2:\n* Add {ILI,EOM,LFS}_ERR defines to \u003clinux/hdreg.h\u003e.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "22c525b976778cce5bb6f8fdcc70046168c54b1a", "tree": "40ab6ef79aa8e059d55e8c55d19fdc4dfe7fdce3", "parents": [ "6a2144146aa2e0eb60e48ba73ac0e1c51346edf6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:11 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:11 2008 +0100" }, "message": "ide: remove ata_status_t and atapi_status_t\n\nRemove ata_status_t (unused) and atapi_status_t.\n\nWhile at it:\n* replace \u0027HWIF(drive)\u0027 by \u0027drive-\u003ehwif\u0027 (or just \u0027hwif\u0027 where possible)\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6a2144146aa2e0eb60e48ba73ac0e1c51346edf6", "tree": "2fef7223ef38b8bd35b16b4006f6504370eb72c8", "parents": [ "918337a85366ad0f1c4c08ebe45e4fb1e3a3c15f" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:11 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:11 2008 +0100" }, "message": "ide: CPU endianness doesn\u0027t matter for special_t\n\nspecial_t is used only internally by the IDE subsystem (it isn\u0027t\nrelated to hardware registers and isn\u0027t exported to the user-space).\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "29ed2a5f8c4380959f18e9cbaff13bc61e09889c", "tree": "a248e118820c47d8286808643d42fcecd72e978e", "parents": [ "14b89ef9814614f18a1fcae51e601e7e16a82ef7" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:11 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:11 2008 +0100" }, "message": "ide: remove REQ_TYPE_ATA_TASK\n\nBased on the earlier work by Tejun Heo.\n\nAll users are gone so we can finally remove it.\n\nCc: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "807e35d695690011faa1ce3ad67dfc23c1e39bdc", "tree": "4b9b8328ea27896ea6050a90949d79f6e158d573", "parents": [ "54688aa372cbc83c4361bfb9236f9bfe02168e19" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:10 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:10 2008 +0100" }, "message": "ide: use ide_tf_load() in execute_drive_cmd()\n\n* Add IDE_TFLAG_OUT_DEVICE taskfile flag to indicate the need of writing\n the Device register and handle it in ide_tf_load().\n\n Update ide_tf_load() and {do_rw,flagged}_taskfile() users accordingly.\n\n* Use struct ide_taskfile and ide_tf_load() in execute_drive_cmd().\n\n* Make the debugging code dump all taskfile registers for both\n REQ_ATA_TYPE_{CMD,TASK} requests and move it to ide_tf_load()\n so it also covers REQ_ATA_TYPE_TASKFILE requests.\n\nThere should be no functionality changes caused by this patch\n(unless DEBUG is defined).\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4ee06b7e677da4c75f2fcc5fd850543852d18bf2", "tree": "0c7c4b1e2be3179cc25e95f4148577cd9047e398", "parents": [ "f1ca6d37f991347b87d86430db42e2ab139d1b1d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:08 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:08 2008 +0100" }, "message": "ide: remove stale ide.h \"configuration options\"\n\nRemove stale ide.h \"configuration options\":\n\n* INITIAL_MULT_COUNT - always defined to 0\n\n* SUPPORT_SLOW_DATA_PORTS - unused\n\n* OK_TO_RESET_CONTROLLER - always defined to 1\n\n* DISABLE_IRQ_NOSYNC - always defined to 0\n\nLeave SUPPORT_VLB_SYNC (defined to 0 for CRIS and FRV, otherwise to 1)\nfor now but disallow overriding it by \u003casm/ide.h\u003e.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "74095a91ed02f6727b62d4416be00a041f2d7436", "tree": "033cc52877103739c5b55a2cfdd3bfaf6996d5d3", "parents": [ "9a3c49be5c5f7388eefb712be9a383904140532e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:07 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:07 2008 +0100" }, "message": "ide: use do_rw_taskfile() in flagged_taskfile()\n\nBased on the earlier work by Tejun Heo.\n\n* Move setting IDE_TFLAG_LBA48 taskfile flag from do_rw_taskfile()\n function to the callers.\n\n* Add IDE_TFLAG_FLAGGED taskfile flag for flagged taskfiles coming\n from ide_taskfile_ioctl(). Check it instead of -\u003etf_out_flags.all.\n\n* Add IDE_TFLAG_OUT_DATA taskfile flag to indicate the need to load\n IDE data register in ide_tf_load().\n\n* Add IDE_TFLAG_OUT_* taskfile flags to indicate the need to load\n particular IDE taskfile registers in ide_tf_load().\n\n* Update do_rw_taskfile() and ide_tf_load() users to set respective\n IDE_TFLAG_OUT_* taksfile flags.\n\n* Add task_dma_ok() helper.\n\n* Use IDE_TFLAG_FLAGGED taskfile flag to select HIHI mask in ide_tf_load().\n\n* Use do_rw_taskfile() in flagged_taskfile().\n\n* Remove no longer needed \u0027tf_out_flags\u0027 field from ide_task_t.\n\nThere should be no functionality changes caused by this patch.\n\nCc: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9a3c49be5c5f7388eefb712be9a383904140532e", "tree": "5dc16604e155dcc6c14e65dc3cfce8605f2c8f82", "parents": [ "9e42237f26cf517a3f682505f03a3a8d89b3b35d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:07 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:07 2008 +0100" }, "message": "ide: add ide_no_data_taskfile() helper\n\n* Add ide_no_data_taskfile() helper and convert ide_raw_taskfile() w/ NO DATA\n protocol users to use it instead.\n\n* Set -\u003edata_phase explicitly in ide_no_data_taskfile()\n (TASKFILE_NO_DATA is defined as 0x0000).\n\n* Unexport task_no_data_intr().\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9e42237f26cf517a3f682505f03a3a8d89b3b35d", "tree": "93b94dd8e1b1d9e257ed3ef84682bf4c0a22ad11", "parents": [ "2bd06b23e2a099abbf550202f62cd433e01f83e7" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:07 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:07 2008 +0100" }, "message": "ide: add ide_tf_load() helper\n\nBased on the earlier work by Tejun Heo.\n\n* Add \u0027tf_flags\u0027 field (for taskfile flags) to ide_task_t.\n\n* Add IDE_TFLAG_LBA48 taskfile flag for LBA48 taskfiles.\n\n* Add IDE_TFLAG_NO_SELECT_MASK taskfile flag for __ide_do_rw_disk()\n which doesn\u0027t use SELECT_MASK() (looks like a bug but it requires\n some more investigation).\n\n* Split off ide_tf_load() helper from do_rw_taskfile().\n\n* Convert __ide_do_rw_disk() to use ide_tf_load().\n\nThere should be no functionality changes caused by this patch.\n\nCc: Tejun Heo \u003chtejun@gmail.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "650d841d9e053a618dd8ce753422f91b493cf2f6", "tree": "70f81acbf856e4a4d8126bdf6d60144b374cc1a9", "parents": [ "cd2a2d969761c26542095c01324201ca0b3ee896" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:06 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:06 2008 +0100" }, "message": "ide: add struct ide_taskfile (take 2)\n\n* Don\u0027t set write-only ide_task_t.hobRegister[6] and ide_task_t.hobRegister[7]\n in idedisk_set_max_address_ext().\n\n* Add struct ide_taskfile and use it in ide_task_t instead of tfRegister[]\n and hobRegister[].\n\n* Remove no longer needed IDE_CONTROL_OFFSET_HOB define.\n\n* Add #ifndef/#endif __KERNEL__ around definitions of {task,hob}_struct_t.\n\nWhile at it:\n\n* Use ATA_LBA define for LBA bit (0x40) as suggested by Tejun Heo.\n\nv2:\n* Add missing newlines. (Noticed by Sergei)\n\n* Use ~ATA_LBA instead of 0xBF. (Noticed by Sergei)\n\n* Use unnamed unions for error/feature and status/command.\n (Suggested by Sergei).\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "cd2a2d969761c26542095c01324201ca0b3ee896", "tree": "fa95d329ac2f2ae3fca30833b8b0ec91aefbd243", "parents": [ "1c029fd658baa2442e8e51dc9c819301cad95777" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:06 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:06 2008 +0100" }, "message": "ide: remove task_ioreg_t typedef (take 2)\n\nRemove task_ioreg_t typedef from the kernel code (but leave it\nin \u003clinux/hdreg.h\u003e for #ifndef/#endif __KERNEL__ case).\n\nWhile at it also move sata_ioreg_t typedef under #ifndef/#endif __KERNEL__.\n\nv2:\nRemove name of the second parameter from ide_execute_command() declaration.\n(Noticed by Sergei).\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1c029fd658baa2442e8e51dc9c819301cad95777", "tree": "fbbfe6bb774001c9346ea0f772e5f4b0d469b989", "parents": [ "866664d79f6a920af07e6503f64366f4c5b2d41f" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:05 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:05 2008 +0100" }, "message": "ide: remove -\u003edma_master field from ide_hwif_t (take 5)\n\n* Convert cmd64x, hpt366 and pdc202xx_old host drivers to use\n pci_resource_start(hwif-\u003epci_dev, 4) instead of hwif-\u003edma_master.\n\n* Remove no longer needed -\u003edma_master field from ide_hwif_t.\n\nv2:\n* Use the more readable \u0027hwif-\u003edma_base - (hwif-\u003echannel * 8)\u0027 instead of\n pci_resource_start(hwif-\u003epci_dev, 4).\n\nv3:\n* Use hwif-\u003eextra_base in hpt366/pdc20xx_old + some cosmetic fixups over v2\n (suggested by Sergei).\n\nv4:\n* Correct offsets in hpt3xxn_set_clock().\n\nv5:\n* Use hwif-\u003eextra_base in hpt366 for _real_ this time. (Noticed by Sergei)\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9121106a7f149f9702ed7c2ac0d86e9feb54ede8", "tree": "c438ea68c6d06ff3467e578bb24c68a405e0264a", "parents": [ "1641002bf56c1da265f2c49ea1c29baba997e63b" ], "author": { "name": "Steven Toth", "email": "stoth@hauppauge.com", "time": "Tue Jan 22 01:00:33 2008 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:05:11 2008 -0200" }, "message": "V4L/DVB (7058): IR corrections for the Pinnacle 800i\n\nIR corrections for the Pinnacle 800i\n\nSigned-off-by: Steven Toth \u003cstoth@hauppauge.com\u003e\nSigned-off-by: Chaogui Zhang \u003cczhang1974@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "27c685a4b09b5e391023d769cddb97e4fcb3b9e1", "tree": "af296caf5de933e90f7c82170f0cc2e57dd062f0", "parents": [ "dfc1c08aab447d49230dacb390d3f2263584d28f" ], "author": { "name": "Steven Toth", "email": "stoth@hauppauge.com", "time": "Sat Jan 05 16:50:14 2008 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:05:05 2008 -0200" }, "message": "V4L/DVB (7042): xc5000: Tuner analog support\n\nFrom Zhang: This an updated patch that adds analog support for\nthe xc5000 tuner driver. it was tested on a Pinnacle PCTV HD 800i\ncard (patches to follow).\n\nPatch commited as-is, cleanup to follow ... Steve.\n\nSigned-off-by: Chaogui Zhang \u003cczhang1974@gmail.com\u003e\nSigned-off-by: Steven Toth \u003cstoth@hauppauge.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "f234081bc564c69eb0e2cd4e957ad1cbae4a6144", "tree": "4dd6400872df3f73e4f4b63c7303564fe3264c1d", "parents": [ "d05051c82e0e8ff748e9c9a06a061bda3ad656e5" ], "author": { "name": "Steven Toth", "email": "stoth@hauppauge.com", "time": "Thu Jan 10 01:22:39 2008 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:04:47 2008 -0200" }, "message": "V4L/DVB (7002): cx25840: Add basic CX23885 AVCore support\n\nThe cx23885/7/8 PCIe bridge has an internal AVCore modelled on\nthe cx2584x family. Many of the registers positions are identical\nbut some moved. The register values are also different because\nthe different bridges run at different clock rates.\n\nSigned-off-by: Steven Toth \u003cstoth@hauppauge.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "d05051c82e0e8ff748e9c9a06a061bda3ad656e5", "tree": "8c16254c217b301b60519136bc12618de3894a2e", "parents": [ "c6243d9c3de82e46467c88898db45ca14b6843a0" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Thu Jan 10 07:33:03 2008 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:04:46 2008 -0200" }, "message": "V4L/DVB (6997): Replace a very dirty hack on videobuf for a clean wait_event\n\nIn order to videobuf_iolock to work, mmap_mapper should be called first.\nOtherwise, an OOPS is generated.\n\nOn some cases, .mmap file handler used to took some time to be called. On those\nsituations, mmap_mmapper() were called after iolock.\n\nThis patch properly waits for mmap_mapper to be called, otherwise generating an\nerror.\n\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "e8018c9e78b0ff4bb0290e46f4045fb4ea589ae8", "tree": "30fccea432c63aa577cc874cd47e0f6e734db1b6", "parents": [ "3f4dfe2acf4ffed48395e69166531d8925eb106a" ], "author": { "name": "Andrey J. Melnikoff (TEMHOTA)", "email": "temnota@kmv.ru", "time": "Mon Jan 07 05:17:39 2008 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:04:40 2008 -0200" }, "message": "V4L/DVB (6973): Add Beholder TV 401/405/407/409/505/507/609/M6 support\n\nThis patch updates cardlist for Beholder TV tuners:\nold models (with GPIO ir) 401, 403, 405, 407, 409, 505, 507\nand add support for 607, 609, M6 cards with new i2c-ir.\n\nSigned-off-by: Igor Kuznetsov \u003cigk72@yandex.ru\u003e\nSigned-off-by: Andrey J. Melnikov \u003ctemnota@kmv.ru\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "8574ac690eab730a3ff735177af1d52e45e36c8b", "tree": "a31cc6d453810d62693619f9c58dcdce43e1779c", "parents": [ "67d52e29032dd2f21d4080331f47a21205f337f6" ], "author": { "name": "Michael Krufky", "email": "mkrufky@linuxtv.org", "time": "Mon Dec 24 15:49:33 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:04:24 2008 -0200" }, "message": "V4L/DVB (6921): include/media/v4l2-i2c-drv.h must #include \u003cmedia/v4l2-common.h\u003e\n\nFix the following compiler error:\n\nv4l2-i2c-drv.h:72: error: implicit declaration of function \u0027v4l2_i2c_attach\u0027\n\nAlso, prevent multiple inclusions of v4l2-i2c-drv.h\n\nSigned-off-by: Michael Krufky \u003cmkrufky@linuxtv.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "6fb377f85cb8c2c1580ce8b134c887a7b53c7aa9", "tree": "b3f840769f841790797d918a36154ec8cda20113", "parents": [ "0b394def21e7d3bd02aeee5570473582ce7984ec" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Tue Dec 18 19:40:44 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:04:08 2008 -0200" }, "message": "V4L/DVB (6869): cs5345: new i2c driver\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "0b394def21e7d3bd02aeee5570473582ce7984ec", "tree": "49ef5487de1439eb3087f3ee086537ecd464bfd3", "parents": [ "9fad368b6dff95b8b009a6b8eed42a549a05b263" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Tue Dec 18 19:27:31 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:04:07 2008 -0200" }, "message": "V4L/DVB (6868): i2c-id.h: add I2C_DRIVERID_CS5345\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "ea48c13ad0e5626b827bd7076c22df1a352e3983", "tree": "152c5f10a0abd3f87ac1d0017ac397fbbc45ccae", "parents": [ "f19a73d620c5412e2413b778f4dad21febdd6115" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Wed Dec 12 07:04:58 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:04:04 2008 -0200" }, "message": "V4L/DVB (6861): cx2341x: command argument should be u32 instead of int\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "ab1660503ac3af7febfcf987648509b484d4feda", "tree": "9ca5fbfadf1c4c7a6c227b5deb549d198217720a", "parents": [ "fa746aee336fedfe25e6945e5967399966948420" ], "author": { "name": "Michael Krufky", "email": "mkrufky@linuxtv.org", "time": "Sun Dec 09 02:26:48 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:03:28 2008 -0200" }, "message": "V4L/DVB (6785): tda8290: remove dependency on struct tuner\n\n- remove dependency of tda8290 module on struct tuner\n- move tuner_foo printk macros from tuner-driver.h into tuner-core.c\n- clean up #includes of tuner-i2c.h / tuner-driver.h\n\nSigned-off-by: Michael Krufky \u003cmkrufky@linuxtv.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "2a2bfbff3d867c62a49f43266ca993c9c2c2ff28", "tree": "e663c97371f8c50b9ef56c8544d024d79c6942d5", "parents": [ "d9009201207c4bdce9b95a0bd903b3f087e8eda1" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Sat Dec 08 07:43:14 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:03:24 2008 -0200" }, "message": "V4L/DVB (6766): ivtv: remove i2c legacy support from drivers that no longer need it\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "d6964aa8d4a418d69da1652121940fabc6b5d591", "tree": "c01e56513d2b32c5f7fd2359b975266c10d80a1e", "parents": [ "0fc0686e64d21a6abded96af2b1a895dfa8b2530" ], "author": { "name": "Brandon Philips", "email": "brandon@ifup.org", "time": "Tue Nov 06 20:23:08 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:02:11 2008 -0200" }, "message": "V4L/DVB (6603): V4L: videobuf: convert streaming and reading to bitfields\n\nSigned-off-by: Brandon Philips \u003cbphilips@suse.de\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "0fc0686e64d21a6abded96af2b1a895dfa8b2530", "tree": "6c7a696c13bccb98e9b4a95e995b7992605ed419", "parents": [ "1414becf15da1701b0c45e9c82b1f120cb676a36" ], "author": { "name": "Brandon Philips", "email": "brandon@ifup.org", "time": "Tue Nov 06 20:02:36 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:02:11 2008 -0200" }, "message": "V4L/DVB (6600): V4L: videobuf: don\u0027t chew up namespace STATE_.*, convert to VIDEOBUF_\n\ns/STATE_NEEDS_INIT/VIDEOBUF_NEEDS_INIT/g\ns/STATE_PREPARED/VIDEOBUF_PREPARED/g\ns/STATE_QUEUED/VIDEOBUF_QUEUED/g\ns/STATE_ACTIVE/VIDEOBUF_ACTIVE/g\ns/STATE_DONE/VIDEOBUF_DONE/g\ns/STATE_ERROR/VIDEOBUF_ERROR/g\ns/STATE_IDLE/VIDEOBUF_IDLE/g\n\nSigned-off-by: Brandon Philips \u003cbphilips@suse.de\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "2c94a674e059e89252d58da655efa4e798be4d48", "tree": "425261eec62e6739765d425e237dbcdaedeac64b", "parents": [ "53133afbeeb177487a907fdc2edf18f857497641" ], "author": { "name": "Sakari Ailus", "email": "sakari.ailus@nokia.com", "time": "Tue Oct 30 05:52:52 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:02:06 2008 -0200" }, "message": "V4L/DVB (6580): Set slave\u0027s master before master\u0027s attach call.\n\nV4L: Int if: Set slave\u0027s master before attach, remove master argument\n\nThe master also now gets its own pointer from slave\u0027s structure.\n\nSigned-off-by: Sakari Ailus \u003csakari.ailus@nokia.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "9695a49839353bdaff79fe27399be2eb72585223", "tree": "27b3fd255a1dcc8f5f4675f30f6ac8e0315ad1a0", "parents": [ "6fce7fcd6d062f7acb423c5d6a190f2977454640" ], "author": { "name": "Adrian Bunk", "email": "bunk@kernel.org", "time": "Mon Nov 05 14:07:18 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:02:04 2008 -0200" }, "message": "V4L/DVB (6574): common/ir-functions.c: make a function static\n\nir_rc5_decode() can become static.\n\nSigned-off-by: Adrian Bunk \u003cbunk@kernel.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "c5d857d5d3a7cfe355d93916fc094035c85147f7", "tree": "f0347c6aebb5a9994dbbb11fc5dee25cf285784b", "parents": [ "241020d19ee9da29171d989ff876c657e4b938b5" ], "author": { "name": "Marco Schluessler", "email": "marco@lordzodiac.de", "time": "Wed Oct 31 00:44:22 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:01:52 2008 -0200" }, "message": "V4L/DVB (6496): saa7146_vv.h: remove wrong include \u003clinux/videodev.h\u003e\n\nremove wrong include \u003clinux/videodev.h\u003e\n\nSigned-off-by: Marco Schluessler \u003cmarco@lordzodiac.de\u003e\nSigned-off-by: Oliver Endriss \u003co.endriss@gmx.de\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "05e997197e459a03df577ba49c34c1820957ee4a", "tree": "fd2e4b13b64933cd4197d2628dfb2ba4dd91ed85", "parents": [ "761dacd25d9e9be2358df21a0f086bbb4cf1c789" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Tue Oct 30 05:41:54 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:01:47 2008 -0200" }, "message": "V4L/DVB (6487): i2c-id: add M52790 driver ID\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "761dacd25d9e9be2358df21a0f086bbb4cf1c789", "tree": "30f16ed79abc5346d0c25b124e8c8fc3643e7bd6", "parents": [ "4be2f47054fb12a5868838770595e8d3a02e60f2" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Tue Oct 30 05:41:25 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:01:46 2008 -0200" }, "message": "V4L/DVB (6486): m52790: add new Mitsubishi A/V switch i2c driver\n\nThis driver is used by the ASUS Falcon2 cx23416-based cards.\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "0b5f4a12e628893624b478523fb4e2708c605710", "tree": "41e3ec34f6c2c81063f36d10c224d7e6cfb0f59d", "parents": [ "8c125f2ceb3ec1ba01e96fffd8558ef163b40fe8" ], "author": { "name": "Michael Krufky", "email": "mkrufky@linuxtv.org", "time": "Sat Oct 27 13:09:16 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:01:30 2008 -0200" }, "message": "V4L/DVB (6469): tuner: remove TUNER_PHILIPS_TDA8295\n\nTUNER_PHILIPS_TDA8290 will autodetect a TDA8290 or a TDA8295,\nso we don\u0027t need this separate entry anymore.\n\nSigned-off-by: Michael Krufky \u003cmkrufky@linuxtv.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "a2e521e85c04af3511af3ea8971efb4ef8bde533", "tree": "3c729c9d2ba71de8620671c4d48ca28b5c2e304b", "parents": [ "188f3457c21ac7869005021b56b4578293c644bb" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Mon Sep 17 05:13:45 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:01:28 2008 -0200" }, "message": "V4L/DVB (6466): v4l2-i2c-drv: first call remove, then detach client\n\nThe remove driver function expects that the client is still attached\nto the driver, so do the detach after calling remove().\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "88307eb3c69c80a705072e68463d8f72005fc027", "tree": "5513daba6158185704d36d8b6b9b13a420c61482", "parents": [ "1a39275a3f2fc6fbdb876f5121d67d4b13310c5b" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Fri Sep 14 04:49:16 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:01:23 2008 -0200" }, "message": "V4L/DVB (6460): v4l2-i2c-drv: add legacy_probe function pointer\n\nSome devices do complicated tests whether the device can be probed or not.\nAdd a legacy_probe function pointer to support that.\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "8ffbc6559493c64d6194c92d856196fdaeb8a5fb", "tree": "b279073efa70f56cf6f0614a6a96374464e492ec", "parents": [ "5ef4730d1bfe5be71ce54d927c510ad5da968854" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Wed Sep 12 08:32:50 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:01:16 2008 -0200" }, "message": "V4L/DVB (6451): v4l2: add support for bus-based I2C drivers\n\nTwo new headers were added: one for I2C drivers that are only used\nby V4L2 drivers converted to the new bus-based I2C API, and one that\ncan be used by both converted and unconverted drivers (at the expense of\nsome additional overhead).\n\nTo support the legacy I2C API a helper function was added to v4l2-common.c.\n\nThese headers take care of all the \u0027boilerplate\u0027 code that all V4L2 I2C drivers\nhave in common and will automatically support the bus-based I2C API introduced\nin kernel 2.6.22.\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "5bea1cd3871351d70cc7624af138f8aa68b7be77", "tree": "77db506f3fb668e33e091aaa1cda2cf09da85085", "parents": [ "ce1f8bdb0cbe9c5f57cf0256ef75fce06152547f" ], "author": { "name": "Michael Krufky", "email": "mkrufky@linuxtv.org", "time": "Mon Oct 22 09:56:38 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:01:06 2008 -0200" }, "message": "V4L/DVB (6435): tda8290: add support for NXP TDA18271 tuner and TDA8295 analog demod\n\nAdd basic support for NXP TDA8295 analog demod and TDA18271 tuner silicon.\n\nTDA8295 + TDA8275a not yet tested.\nTDA8290 + TDA18271 not yet supported.\n\nDigital mode of TDA18271 not yet tested \u0026 needs more work.\n\nSigned-off-by: Michael Krufky \u003cmkrufky@linuxtv.org\u003e\nReviewed-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "12466577853b0d057f4416f4c7020e544f3a4209", "tree": "855136ae91024a8cca89454c67bd9a0c7125d0c6", "parents": [ "07533b6a8097c6fdb17fb154725757b64238a8d9" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Wed Oct 24 11:08:20 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:01:01 2008 -0200" }, "message": "V4L/DVB (6422): Add the pending entries for xc2028/3028 based boards\n\nAlso replaces all occurrences of TUNER_XCEIVE_XC3028 to TUNER_XC2028.\n\nSome work is still may be required to make sure that non-tm6000 drivers will\nbe capable of using tuner-xc2028.\n\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "7f1711234e6a21c153e892758d9d82c333ab37ac", "tree": "19281fdae9f51a25c119dccf54515192614b242f", "parents": [ "2d94dfc8c38edf63e91e48fd55c3a8822b6a9ced" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Thu Oct 18 19:56:47 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Jan 25 19:00:54 2008 -0200" }, "message": "V4L/DVB (6384): Replace TDA9887_SET_CONFIG by TUNER_SET_CONFIG\n\nCurrently, the only tuner-specific device that allows special\nconfigurations is tda9887. However, tea5767 also may require some\nspecial configurations (for example, to specify a different Xtal freq).\n\nThis patch replaces TDA9887_SET_CONFIG by a more generic internal ioctl\n(TUNER_SET_CONFIG). The newer one allows specifying what tuner is\nappliable to a configuration set, and allows an arbitrary configuration\nstruct.\n\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" } ], "next": "6d082592b62689fb91578d0338d04a9f50991990" }