)]}' { "log": [ { "commit": "b9500546d5f85b56359657e1f78334db8de851fd", "tree": "545f8152e70737587b06f940209cad6b5e273447", "parents": [ "45bff2ea4285cac5b4438c65216e114d3619f123" ], "author": { "name": "Pratyush Anand", "email": "pratyush.anand@st.com", "time": "Tue Mar 22 16:33:58 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 22 17:44:10 2011 -0700" }, "message": "ST SPEAr: PCIE gadget suppport\n\nThis is a configurable gadget. can be configured by configfs interface.\nAny IP available at PCIE bus can be programmed to be used by host\ncontroller.It supoorts both INTX and MSI.\n\nBy default, the gadget is configured for INTX and SYSRAM1 is mapped to\nBAR0 with size 0x1000\n\nSigned-off-by: Pratyush Anand \u003cpratyush.anand@st.com\u003e\nCc: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nCc: Jesse Barnes \u003cjbarnes@virtuousgeek.org\u003e\nCc: Viresh Kumar \u003cviresh.kumar@st.com\u003e\nCc: Shiraz Hashim \u003cshiraz.hashim@st.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "ff606677f6a47c63329cf8e6c7cf978c29f2d736", "tree": "565bcdaa1f5058af0a6fd2260b3c45029c955d08", "parents": [ "efcfed9bad88be8193ee6a1b8e72d7381e7b0e0e" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 21 17:59:36 2011 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@endymion.delvare", "time": "Mon Mar 21 17:59:36 2011 +0100" }, "message": "Move lis3lv02d drivers to drivers/misc\n\nThe lis3lv02d drivers aren\u0027t hardware monitoring drivers, so the don\u0027t\nbelong to drivers/hwmon. Move them to drivers/misc, short of a better\nhome.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nAcked-by: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nAcked-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nTested-by: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nTested-by: Takashi Iwai \u003ctiwai@suse.de\u003e\n" }, { "commit": "f0f05b1c751772d19c9c8f36d75e97b1d9687407", "tree": "31aa221575b1b05a6f3d63f7185ff01a29541490", "parents": [ "47c1697508f2ec9f6b31ce6c825fe1017871dea6" ], "author": { "name": "Arun Murthy", "email": "arun.murthy@stericsson.com", "time": "Mon Sep 06 12:24:52 2010 +0530" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Fri Oct 29 00:29:21 2010 +0200" }, "message": "misc: Add ab8500 pwm driver\n\nThis patch adds a Pulse Width Modulation driver for Analog Baseband\nChip AB8500.\n\nSigned-off-by: Arun Murthy \u003carun.murthy@stericsson.com\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nAcked-by: Mike Rapoport \u003cmike@compulab.co.il\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "e4c5bf8e3dca827a1b3a6fac494eae8c74b7e1e7", "tree": "ea51b391f7d74ca695dcb9f5e46eb02688a92ed9", "parents": [ "81280572ca6f54009edfa4deee563e8678784218", "a4ac0d847af9dd34d5953a5e264400326144b6b2" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Oct 28 09:44:56 2010 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Oct 28 09:44:56 2010 -0700" }, "message": "Merge \u0027staging-next\u0027 to Linus\u0027s tree\n\nThis merges the staging-next tree to Linus\u0027s tree and resolves\nsome conflicts that were present due to changes in other trees that were\naffected by files here.\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "22d96aa59cf120db3584e4c3365554cae77d2441", "tree": "c43dd27c61139ee599bfe34ccaa7b14382d74b8a", "parents": [ "8a233f01b7d7dd587f85fa581274f168f1e88bb8" ], "author": { "name": "anantha", "email": "anantha.narayanan@intel.com", "time": "Tue Oct 26 14:22:41 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 26 16:52:15 2010 -0700" }, "message": "drivers/misc/apds9802als.c: ALS drivers for the apds9802als\n\nThis adds support for the ADPS9802ALS sensor.\n\nCleanup by Alan Cox\n\t- move mutexes to cover more things\n\t- report I/O errors back to user space\n\t- report range and values in LUX\n\nSigned-off-by: Anantha Narayanan \u003canantha.narayanan@intel.com\u003e\n[The 4K and 64K in the hw spec actually means 4095 (12bit) and 65535 (16bit).]\nSigned-off-by: Hong Liu \u003chong.liu@intel.com\u003e\n[Updated to match the ALS light API interface convention from Samu]\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nAcked-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "2e85c4ddd3f32d3e1da51f4129473399e505ffa3", "tree": "309e11ed73bca83507388edcd1c903453f9d48e0", "parents": [ "93e2f585c149b5056d5c5eaffcaf747bbe9c3015" ], "author": { "name": "Kalhan Trisal", "email": "kalhan.trisal@intel.com", "time": "Tue Oct 26 14:22:40 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 26 16:52:15 2010 -0700" }, "message": "drivers/misc/isl29020.c: ambient light sensor\n\nThe LS driver will read the latest Lux measurement based upon the light\nbrightness and will report the LUX output through sysfs interface.\n\nThis hardware isn\u0027t quite the same as the ISL29003 so has a different\ndriver.\n\n[akpm@linux-foundation.org: put PM code under #ifdef CONFIG_PM]\nSigned-off-by: Kalhan Trisal \u003ckalhan.trisal@intel.com\u003e\n[Runtime power management support added]\nSigned-off-by: Arjan van de Ven \u003carjan@linux.intel.com\u003e\n[Fixes to runtime PM]\nSigned-off-by: Liu Hong \u003chong.liu@intel.com\u003e\n[Cleanups and added checks for I2C errors, reworked the API to match the\n saner one agreed for other sensors]\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "92b1f84d46b24675493d95a239eea2b07e5f13f8", "tree": "d81be3348c30402d623059c86259f83657900a0f", "parents": [ "190420ab34ab4c077c641893ac19f364cf3606e4" ], "author": { "name": "Samu Onkalo", "email": "samu.p.onkalo@nokia.com", "time": "Tue Oct 26 14:22:38 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 26 16:52:14 2010 -0700" }, "message": "drivers/misc: driver for APDS990X ALS and proximity sensors\n\nThis is a driver for Avago APDS990X combined ALS and proximity sensor.\n\nInterface is sysfs based. The driver uses interrupts to provide new data.\nThe driver supports pm_runtime and regulator frameworks.\n\nSee Documentation/misc-devices/apds990x.txt for details\n\nSigned-off-by: Samu Onkalo \u003csamu.p.onkalo@nokia.com\u003e\nAcked-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "190420ab34ab4c077c641893ac19f364cf3606e4", "tree": "202b84214c818dff63eb4a0fe37d87679604d443", "parents": [ "4b068de9ab1c404734fde90ce5d3f4f5b4f0b9d5" ], "author": { "name": "Samu Onkalo", "email": "samu.p.onkalo@nokia.com", "time": "Tue Oct 26 14:22:37 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 26 16:52:14 2010 -0700" }, "message": "drivers/misc: driver for bh1770glc / sfh7770 ALS and proximity sensor\n\nThis is a driver for ROHM BH1770GLC and OSRAM SFH7770 combined ALS and\nproximity sensor.\n\nInterface is sysfs based. The driver uses interrupts to provide new data.\n The driver supports pm_runtime and regulator frameworks.\n\nSee Documentation/misc-devices/bh1770glc.txt for details\n\nSigned-off-by: Samu Onkalo \u003csamu.p.onkalo@nokia.com\u003e\nAcked-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "cf4ece53460c64a04a643ef13f6b6cb4bf3a8342", "tree": "832441822810fddd690f150044d9b18ce32e758f", "parents": [ "c64a0926710153b9d44c979d2942f4a8648fd74e" ], "author": { "name": "Masayuki Ohtak", "email": "masa-korg@dsn.okisemi.com", "time": "Wed Sep 01 21:16:30 2010 +0900" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Oct 22 10:16:42 2010 -0700" }, "message": "add Packet hub driver for Topcliff Platform controller hub\n\nPacket hub driver of Topcliff PCH\n\nTopcliff PCH is the platform controller hub that is going to be used in\nIntel\u0027s upcoming general embedded platform. All IO peripherals in\nTopcliff PCH are actually devices sitting on AMBA bus. Packet hub is\na special converter device in Topcliff PCH that translate AMBA transactions\nto PCI Express transactions and vice versa. Thus packet hub helps present\nall IO peripherals in Topcliff PCH as PCIE devices to IA system.\nTopcliff PCH has MAC address and Option ROM data.\nThese data are in SROM which is connected to PCIE bus.\nPacket hub driver of Topcliff PCH can access MAC address and Option ROM data in\nSROM via sysfs interface.\n\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "2bb32e84a17fab547c7a746c7888e846c9cd88cc", "tree": "5c430448e7846998e5306ed805889c4839dcac56", "parents": [ "a0cc2f3b51a8649da5262aba7501dc21738e1b8d" ], "author": { "name": "Pavan Savoy", "email": "pavan_savoy@ti.com", "time": "Wed Oct 06 12:18:15 2010 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Wed Oct 06 08:27:00 2010 -0700" }, "message": "misc: ti-st: Kconfig \u0026 Makefile for TI_ST\n\nAdd the Kconfig and the Makefile for the TI_ST driver.\nTI_ST driver is the line discipline driver for the Texas Instrument\u0027s\nWiLink chipsets.\nAlso add the ti-st folder to list of drivers under drivers/misc.\n\nSigned-off-by: Pavan Savoy \u003cpavan_savoy@ti.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "d544b7a40ad3423676b8876aad64fc5f87296b2d", "tree": "f08302b1ce132a71aa8702841846a94ef8e999f3", "parents": [ "710224fa2750cf449c02dd115548acebfdd2c86a" ], "author": { "name": "Dmitry Torokhov", "email": "dtor@vmware.com", "time": "Wed Sep 22 13:04:57 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Sep 22 17:22:38 2010 -0700" }, "message": "vmware balloon: rename module\n\nIn an effort to minimize customer confusion we want to unify naming\nconvention for VMware-provided kernel modules. This change renames the\nballoon driver from vmware_ballon to vmw_balloon.\n\nWe expect to follow this naming convention (vmw_\u003cmodule_name\u003e) for all\nmodules that are part of mainline kernel and/or being distributed by\nVMware, with the sole exception of vmxnet3 driver (since the name of\nmainline driver happens to match with the name used in VMware Tools).\n\nSigned-off-by: Dmitry Torokhov \u003cdtor@vmware.com\u003e\nAcked-by: Bhavesh Davda \u003cbhavesh@vmware.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "cfa3b24c38b58cb6acabe6441b4668e530e957af", "tree": "666af3dd6eb990d244ef19d16d099107da11b28d", "parents": [ "5f1209a1a4cf24798408fa0893258dcbefcf6be9" ], "author": { "name": "Kalhan Trisal", "email": "kalhan.trisal@intel.com", "time": "Mon Aug 09 17:21:05 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Aug 09 20:45:10 2010 -0700" }, "message": "hmc6352: add driver for the HMC6352 compass\n\nThis driver will report the heading values in degrees to the sysfs\ninterface. The values returned are headings . e.g. 245.6\n\nAlan: Cleanups requested now all folded in and a sysfs description to keep\nAndrew happy. The sysfs description now resembles hwmon.\n\nSigned-off-by: Kalhan Trisal \u003ckalhan.trisal@intel.com\u003e\nReviewed-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nCc: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "5bf1d290b57e392eaf4bfb15c67f315fce4140be", "tree": "568a01e0b11b3f58f935396f8793615be5b243e7", "parents": [ "cdf8afca2417c5ae2a940a2ff2d36af986a3cf1d" ], "author": { "name": "Christoph Mair", "email": "christoph.mair@gmail.com", "time": "Mon Aug 09 17:20:28 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Aug 09 20:45:05 2010 -0700" }, "message": "drivers/misc: support for the pressure sensor BMP085 from Bosch Sensortec\n\nThis driver adds support for the BMP085 digital pressure sensor from Bosch\nSensortec. It exposes a sysfs api to userspace where pressure and\ntemperature measurement results can be read from the pressure0_input and\ntemp0_input file. The chip is able to calculate the average of up to\neight samples to increase the accuracy. This feature can be controlled by\nwriting to the oversampling file.\n\nThe BMP085 digital pressure sensor can measure ambient air pressure and\ntemperature. Both values can be obtained from sysfs files. The pressure\nis measured by reading from pressure0_input. Valid values range from\n30000 to 110000 pascal with a resolution of 1 pascal (\u003d0.01 millibar).\n\ntemp0_input holds the current temperature in degree celsius, multiplied by\n10. This results in a resolution of a tenth degree celsius. Values range\nfrom -400 to 850.\n\nTo increase the accuracy, this chip can calculate the average of 1, 2, 4\nor 8 samples. This behavior is controlled through the oversampling sysfs\nfile. Two to the power of the value written to that file specifies how\nmany samples will be used. Valid values: 0..3.\n\n[akpm@linux-foundation.org: fix typo]\n[shubhrajyoti@ti.com: optimize the wait time for the pressure sensor, definition of long is arch dependent so make it u32]\n[akpm@linux-foundation.org: coding-style fixes]\nSigned-off-by: Christoph Mair \u003cchristoph.mair@gmail.com\u003e\nSigned-off-by: Shubhrajyoti D \u003cshubhrajyoti@ti.com\u003e\nAcked-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nCc: Stefan Schmidt \u003cstefan@datenfreihafen.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "7efe15f2a4cd9d40826d31d7d5ef56094f8b65f5", "tree": "45af1fbfad02c2db98ebca52888b5bfcec65a5e5", "parents": [ "37ed19d5cce35a40d3913cf9aa208ce9f60db3d7" ], "author": { "name": "Hemanth V", "email": "hemanthv@ti.com", "time": "Mon Aug 09 17:20:25 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Aug 09 20:45:05 2010 -0700" }, "message": "drivers/misc: ROHM BH1780GLI ambient light sensor driver\n\nAdd support for ROHM BH1780GLI Ambient light sensor.\n\nBH1780 supports I2C interface. Driver supports read/update of power state\nand read of lux value (through SYSFS). Writing value 3 to power_state\nenables the sensor and current lux value could be read.\n\nCurrently this driver follows the same sysfs convention as supported by\ndrivers/misc/isl29003.c.\n\nSigned-off-by: Hemanth V \u003chemanthv@ti.com\u003e\nReviewed-by: Daniel Mack \u003cdaniel@caiaq.de\u003e\nAcked-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Wolfram Sang \u003cw.sang@pengutronix.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "ce8962455e902ffa08d59fd2b113942eaaffb0d6", "tree": "206d1a89b91365697bc10af7bbaefa2c0a305807", "parents": [ "d161edfbf20597752e315e60e31026393680485a" ], "author": { "name": "Linus Walleij", "email": "linus.walleij@stericsson.com", "time": "Sat Jul 17 12:33:48 2010 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Mon Jul 26 10:48:28 2010 +0100" }, "message": "ARM: 6214/2: driver for the character LCD found in ARM refdesigns\n\nThis adds a driver for the character LCD found on the ARM Versatile\nand RealView Platform Baseboards. It doesn\u0027t do very much more than\ndisplay the text \"ARM Linux\" on the first line and the linux banner\non the second line, but that\u0027s still useful.\n\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Walleij \u003ctriad@df.lth.se\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "6c536e4ce8edd61fdc4ab68e19ae164a54fc958f", "tree": "1d09ef6de4c04a4bd597b060d668fce2eac14681", "parents": [ "0c53b9fbcca8870e4f4b248f4ed5fdadd43a01b6" ], "author": { "name": "Michael Hennerich", "email": "michael.hennerich@analog.com", "time": "Mon May 24 14:33:14 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue May 25 08:07:04 2010 -0700" }, "message": "ad525x_dpot: add support for SPI parts\n\nSplit the bus logic out into separate files so that we can handle I2C and\nSPI busses independently. The new SPI bus logic brings in support for a\nlot more parts:\n\n\tAD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203,\n\tAD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235,\n\tAD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,\n\tAD7376, AD8400, AD8402, AD8403, ADN2850\n\n[randy.dunlap@oracle.com: fix ad525X_dpot build]\nSigned-off-by: Michael Hennerich \u003cmichael.hennerich@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "1ed31d6db90d51010545921e59d369d2f92b7ac2", "tree": "358a0b346bc8135cd5e53700eb44308b1a7c8c5b", "parents": [ "ceba1abcb00b0ef0b1efcd715285f6e05523edef", "722154e4cacf015161efe60009ae9be23d492296" ], "author": { "name": "Benjamin Herrenschmidt", "email": "benh@kernel.crashing.org", "time": "Fri May 07 11:29:25 2010 +1000" }, "committer": { "name": "Benjamin Herrenschmidt", "email": "benh@kernel.crashing.org", "time": "Fri May 07 11:29:25 2010 +1000" }, "message": "Merge commit \u0027origin/master\u0027 into next\n" }, { "commit": "453dc65931915abc61f92e12bba1fc4747ff5542", "tree": "10700e010416253dfee19748f892466ac9e98f96", "parents": [ "b8af67e2681c693a21f3933e3bdfce4cf66596d3" ], "author": { "name": "Dmitry Torokhov", "email": "dtor@vmware.com", "time": "Fri Apr 23 13:18:08 2010 -0400" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Apr 24 11:31:26 2010 -0700" }, "message": "VMware Balloon driver\n\nThis is a standalone version of VMware Balloon driver. Ballooning is a\ntechnique that allows hypervisor dynamically limit the amount of memory\navailable to the guest (with guest cooperation). In the overcommit\nscenario, when hypervisor set detects that it needs to shuffle some\nmemory, it instructs the driver to allocate certain number of pages, and\nthe underlying memory gets returned to the hypervisor. Later hypervisor\nmay return memory to the guest by reattaching memory to the pageframes and\ninstructing the driver to \"deflate\" balloon.\n\nWe are submitting a standalone driver because KVM maintainer (Avi Kivity)\nexpressed opinion (rightly) that our transport does not fit well into\nvirtqueue paradigm and thus it does not make much sense to integrate with\nvirtio.\n\nThere were also some concerns whether current ballooning technique is the\nright thing. If there appears a better framework to achieve this we are\nprepared to evaluate and switch to using it, but in the meantime we\u0027d like\nto get this driver upstream.\n\nWe want to get the driver accepted in distributions so that users do not\nhave to deal with an out-of-tree module and many distributions have\n\"upstream first\" requirement.\n\nThe driver has been shipping for a number of years and users running on\nVMware platform will have it installed as part of VMware Tools even if it\nwill not come from a distribution, thus there should not be additional\nrisk in pulling the driver into mainline. The driver will only activate\nif host is VMware so everyone else should not be affected at all.\n\nSigned-off-by: Dmitry Torokhov \u003cdtor@vmware.com\u003e\nCc: Avi Kivity \u003cavi@redhat.com\u003e\nCc: Jeremy Fitzhardinge \u003cjeremy@goop.org\u003e\nCc: Ingo Molnar \u003cmingo@elte.hu\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "a244b25217978ffd54d2cd87013b3cd564689462", "tree": "8316b0eb088427e5f77d9f111c42470d5f6821dc", "parents": [ "0fdf86754f70e813845af4abaa805165ce57a0bb" ], "author": { "name": "Benjamin Herrenschmidt", "email": "benh@kernel.crashing.org", "time": "Wed Apr 07 10:08:49 2010 +1000" }, "committer": { "name": "Benjamin Herrenschmidt", "email": "benh@kernel.crashing.org", "time": "Wed Apr 07 10:08:49 2010 +1000" }, "message": "Remove unused HDPU driver\n\nThis driver seems to be specific to a \"Sky CPU\" board for which we\ndon\u0027t appear to have upstream support (or not any more). No Kconfig\nfile in the kernel ever enables it. So remove it.\n\nSigned-off-by: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\n" }, { "commit": "6a9bcced518b98a7e52b9e8e96af228b171e0498", "tree": "8c8b209c114b177ce21a712928de89b1ed8c5d91", "parents": [ "c074c39d62306efa5ba7c69c1a1531bc7333d252" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Mar 13 20:56:54 2010 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Mar 13 20:56:54 2010 +0100" }, "message": "tsl2550: Move from i2c/chips to misc\n\nMove the last remaining driver from i2c/chips to misc. Good ridance!\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Wolfram Sang \u003cw.sang@pengutronix.de\u003e\nAcked-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\n" }, { "commit": "82dca611bb516ec5fb7d04077733d6a4b70f52d1", "tree": "67e085277bcc06e0aa7bf305e586ce856ef11078", "parents": [ "3c55494670745e523f69b56edb66ca0b50a470c2" ], "author": { "name": "Andres Salomon", "email": "dilinger@collabora.co.uk", "time": "Mon Dec 14 18:00:37 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Dec 15 08:53:28 2009 -0800" }, "message": "cs5535: add a generic MFGPT driver\n\nThis is based on the old code on arch/x86/kernel/mfgpt_32.c, except it\u0027s\nnot x86 specific, it\u0027s modular, and it makes use of a PCI BAR rather than\na random MSR. Currently module unloading is not supported; it\u0027s uncertain\nwhether or not it can be made work with the hardware.\n\n[akpm@linux-foundation.org: add X86 dependency]\nSigned-off-by: Andres Salomon \u003cdilinger@collabora.co.uk\u003e\nCc: Jordan Crouse \u003cjordan@cosmicpenguin.net\u003e\nCc: Ingo Molnar \u003cmingo@elte.hu\u003e\nCc: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nCc: john stultz \u003cjohnstul@us.ibm.com\u003e\nCc: Chris Ball \u003ccjb@laptop.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "4d00928c1f02defc81afcc5cc6198581c4bd03e8", "tree": "79d86f033dec3a2c5c9cfb5a9856eb9735ca92d7", "parents": [ "c0f68c2fab4898bcc4671a8fb941f428856b4ad5" ], "author": { "name": "Daniel Mack", "email": "daniel@caiaq.de", "time": "Mon Dec 14 18:00:17 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Dec 15 08:53:25 2009 -0800" }, "message": "drivers/misc: add driver for Texas Instruments DAC7512\n\nSigned-off-by: Daniel Mack \u003cdaniel@caiaq.de\u003e\nCc: \"H Hartley Sweeten\" \u003chartleys@visionengravers.com\u003e\nCc: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "4eb174bee6f8623fed1af0072f1bebfc3b513a52", "tree": "9357e122a1fc99a881a0091623acc8fe8ce22112", "parents": [ "00b55864bb37200d7f05143c44f5e2edfc8c4578" ], "author": { "name": "Michael Hennerich", "email": "michael.hennerich@analog.com", "time": "Mon Dec 14 18:00:15 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Dec 15 08:53:25 2009 -0800" }, "message": "ad525x_dpot: new driver for AD525x digital potentiometers\n\nThis driver supports the non-volatile digital potentiometers via I2C:\nAD5258, AD5259, AD5251, AD5252, AD5253, AD5254, and AD5255\n\nIt provides a sysfs interface to each device for reading/writing which\nis documented in Documentation/misc-devices/ad525x_dpot.txt.\n\nSigned-off-by: Michael Hennerich \u003cmichael.hennerich@analog.com\u003e\nSigned-off-by: Chris Verges \u003cchrisv@cyberswitching.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "41440ffe21f29bdb985cab76b2d0b06d83e63b19", "tree": "1d7d1ff6f699ccbabb71c7bc4172f7d15bc4bc45", "parents": [ "dad3de7d0090280f44ff27131ed2878f1ab6ddad", "6471b68982d3bb1a593c3e183c804ecf830125d3" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Dec 08 08:12:16 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Dec 08 08:12:16 2009 -0800" }, "message": "Merge branch \u0027i2c-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging\n\n* \u0027i2c-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:\n i2c-stub: Documentation update\n i2c-stub: Allow user to disable some commands\n i2c-stub: Implement I2C block support\n i2c: Refactor for_each callbacks\n i2c-i801: Retry on lost arbitration\n i2c: Remove big kernel lock from i2cdev_open\n ics932s401: Clean up detect function\n i2c: Simplify i2c_detect_address\n i2c: Drop probe, ignore and force module parameters\n i2c: Add missing __devinit markers to old i2c adapter drivers\n i2c: Bus drivers don\u0027t have to support I2C_M_REV_DIR_ADDR\n i2c: Prevent priority inversion on top of bus lock\n i2c-voodoo3: Delete\n i2c-powermac: Drop temporary name buffer\n i2c-powermac: Include the i2c_adapter in struct pmac_i2c_bus\n i2c-powermac: Log errors\n i2c-powermac: Refactor i2c_powermac_smbus_xfer\n i2c-powermac: Reject unsupported I2C transactions\n i2c/chips: Move ds1682 to drivers/misc\n" }, { "commit": "dddc66ffa048fbc842f5de385031f1826649ffc2", "tree": "f5dad3afa6ff57bd54a871419f0baf99073507b9", "parents": [ "6ec22f9b037fc0c2e00ddb7023fad279c365324d" ], "author": { "name": "Wolfram Sang", "email": "w.sang@pengutronix.de", "time": "Sun Dec 06 17:06:16 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Dec 06 17:06:16 2009 +0100" }, "message": "i2c/chips: Move ds1682 to drivers/misc\n\nAs i2c/chips is deprecated, move ds1682 to a more apropriate location.\nBuild tested.\n\nSigned-off-by: Wolfram Sang \u003cw.sang@pengutronix.de\u003e\nAcked-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "ab69a5ae2bdc0b5e20e935a7b75f30aa3f4c3bae", "tree": "d5ed0f7d99c516c2feba03db5c70afbf79f20a48", "parents": [ "7e75f93eda027d9f9e0203ee6ffd210ea92e98f3" ], "author": { "name": "Tomas Winkler", "email": "tomas.winkler@intel.com", "time": "Sat Oct 17 09:09:34 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Oct 19 23:22:50 2009 -0700" }, "message": "iwmc3200top: Add Intel Wireless MultiCom 3200 top driver.\n\nThis patch adds Intel Wireless MultiCom 3200 top driver.\nIWMC3200 is 4Wireless Com CHIP (GPS/BT/WiFi/WiMAX).\nTop driver is responsible for device initialization and firmware download.\nFirmware handled by top is responsible for top itself and\nas well as bluetooth and GPS coms. (Wifi and WiMax provide their own firmware)\nIn addition top driver is used to retrieve firmware logs\nand supports other debugging features\n\nSigned-off-by: Tomas Winkler \u003ctomas.winkler@intel.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "ef12379f205bed7e92434e12ddd44e62d13bebe1", "tree": "c372f5741826e7fbdaec8eac86191b52e3e621af", "parents": [ "3aa7a9a3cf8774f6701b1903a6353f9545f561ce" ], "author": { "name": "Hartley Sweeten", "email": "hartleys@visionengravers.com", "time": "Wed Jul 29 22:41:06 2009 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu Jul 30 17:45:43 2009 +0100" }, "message": "ARM: 5628/1: ep93xx: Introduce Pulse Width Modulator (PWM) driver\n\nThe EP93xx features two PWMs (one on the EP9307) with the following\nfeatures:\n\n * Configurable dual output\n * Separate input clocks for each PWM output\n * 16-bit resolution\n * Programmable pulse width (duty cycle), interval (frequency), and\n polarity\n\nThis adds the necessary core support as well as the driver. A sysfs\ninterface is provided to control the PWM outputs.\n\nSigned-off-by: Matthieu Crapet \u003cmcrapet@gmail.com\u003e\nSigned-off-by: H Hartley Sweeten \u003chsweeten@visionengravers.com\u003e\nAcked-by: Ryan Mallon \u003cryan@bluewatersys.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "5f5bac8272be791b67c7b7b411e7c8c5847e598a", "tree": "30fa0cde7c7c8a879bc26f04155f254df194ea40", "parents": [ "8385f9cb7f12ef6a5261fa76f1a1b612280c94f7" ], "author": { "name": "Michał Mirosław", "email": "mirq-linux@rere.qmqm.pl", "time": "Fri May 22 20:33:59 2009 +0200" }, "committer": { "name": "Pierre Ossman", "email": "pierre@ossman.eu", "time": "Sat Jun 13 22:42:58 2009 +0200" }, "message": "mmc: Driver for CB710/720 memory card reader (MMC part)\n\nThe code is divided in two parts. There is a virtual \u0027bus\u0027 driver\nthat handles PCI device and registers three new devices one per card\nreader type. The other driver handles SD/MMC part of the reader.\n\nSigned-off-by: Michał Mirosław \u003cmirq-linux@rere.qmqm.pl\u003e\nSigned-off-by: Pierre Ossman \u003cpierre@ossman.eu\u003e\n" }, { "commit": "3cdbbeebb77348176bd6a03fd86e11bc281c529e", "tree": "079d84c58cdb0e6f4d43eee69d42d26d5a48af35", "parents": [ "891f7d73ea30f925596b90bcf21020bfc5d90f3f" ], "author": { "name": "Daniel Mack", "email": "daniel@caiaq.de", "time": "Tue Mar 31 15:23:53 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Apr 01 08:59:18 2009 -0700" }, "message": "drivers/misc/isl29003.c: driver for the ISL29003 ambient light sensor\n\nAdd a driver for Intersil\u0027s ISL29003 ambient light sensor device plus some\ndocumentation. Inspired by tsl2550.c, a driver for a similar device.\n\nIt is put in drivers/misc for now until the industrial I/O framework gets\nmerged.\n\nSigned-off-by: Daniel Mack \u003cdaniel@caiaq.de\u003e\nAcked-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "0eb6da20681db9b5d5769d3e1aca877f4a77d8fb", "tree": "da9541a1df5ec189af37a5cb22b548534ed8c064", "parents": [ "e51d565ff6bb1cedc10568425511badf0633a212" ], "author": { "name": "Wolfram Sang", "email": "w.sang@pengutronix.de", "time": "Mon Jan 26 21:19:54 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jan 26 21:19:54 2009 +0100" }, "message": "eeprom: Move 93cx6 eeprom driver to /drivers/misc/eeprom\n\nSigned-off-by: Wolfram Sang \u003cw.sang@pengutronix.de\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "5195e5093bb7d30dbf057b260005cb4ab9761168", "tree": "b73c91ea07ad4b6415461fdad8f217b5f721b274", "parents": [ "a01064a92a1125995fd9078c2305df89a63ed9fe" ], "author": { "name": "Wolfram Sang", "email": "w.sang@pengutronix.de", "time": "Mon Jan 26 21:19:53 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jan 26 21:19:53 2009 +0100" }, "message": "i2c: Move at24 to drivers/misc/eeprom\n\nAs drivers/i2c/chips is going to go away, move the driver to\ndrivers/misc/eeprom. Other eeprom drivers may be moved here later, too.\nUpdate Kconfig text to specify this driver as I2C.\n\nSigned-off-by: Wolfram Sang \u003cw.sang@pengutronix.de\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "cad73120ab0dfd484682229346de8c16073577e1", "tree": "4f04f6c4dc1771d53bd1d9c7da65c7fab629d246", "parents": [ "3af9bfcb433c110839e4c815a9928377f66bbd0e" ], "author": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Fri Jan 09 17:23:38 2009 -0500" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Fri Jan 16 14:32:18 2009 -0500" }, "message": "dell-laptop: move to drivers/platform/x86/ from drivers/misc/\n\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "d97c0defba25a959a990f6d4759f43075540832e", "tree": "27dceaf310e01a6bbcceee3550112b19202f142f", "parents": [ "ec9f168fcc344d2ffec1c8c822076bf22dab5c33", "b4f9fe12157a33351d0df78e925dcacd13252783" ], "author": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Fri Jan 09 04:01:26 2009 -0500" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Fri Jan 09 04:56:56 2009 -0500" }, "message": "Merge branch \u0027drivers-platform\u0027 into release\n\nConflicts:\n\tdrivers/misc/Kconfig\n\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "ad8f07ccaddca1b0f52d0e9677855122a46cfafc", "tree": "5796a3bb23c8b2cdd94453b21e361a3f14e3d3cf", "parents": [ "3cab7fd964916a5474dcaeb23b6723fbfb34cc66" ], "author": { "name": "Matthew Garrett", "email": "mjg59@srcf.ucam.org", "time": "Wed Jan 07 18:08:56 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Jan 08 08:31:12 2009 -0800" }, "message": "misc: add dell-laptop driver\n\nAdd a driver for controlling Dell-specific backlight and rfkill interfaces.\nThis driver makes use of the dcdbas interface to the Dell firmware to\nallow the backlight and rfkill interfaces on Dell systems to be driven\nthrough the standardised sysfs interfaces.\n\nSigned-off-by: Matthew Garrett \u003cmjg@redhat.com\u003e\nCc: Matt Domsch \u003cMatt_Domsch@dell.com\u003e\nCc: Ivo van Doorn \u003civdoorn@gmail.com\u003e\nCc: Len Brown \u003clenb@kernel.org\u003e\nCc: Richard Purdie \u003crpurdie@rpsys.net\u003e\nCc: Henrique de Moraes Holschuh \u003chmh@hmh.eng.br\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "41b16dce390510f550a4d2b12b98e0258bbed6e2", "tree": "03f668f70c47e7d6319a1b5fc21aa0634254cdb1", "parents": [ "8c36790a21eec6c39c372e92c76e81865005a6ce" ], "author": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Mon Dec 01 00:09:47 2008 -0500" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Fri Dec 19 04:42:32 2008 -0500" }, "message": "create drivers/platform/x86/ from drivers/misc/\n\nMove x86 platform specific drivers from drivers/misc/\nto a new home under drivers/platform/x86/.\n\nThe community has been maintaining x86 vendor-specific\nplatform specific drivers under /drivers/misc/ for a few years.\nThe oldest ones started life under drivers/acpi.\nThey moved out of drivers/acpi/ because they don\u0027t actually\nimplement the ACPI specification, but either simply\nuse ACPI, or implement vendor-specific ACPI extensions.\n\nIn the future we anticipate...\ndrivers/misc/ will go away.\nother architectures will create drivers/platform/\u003carch\u003e\n\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "8c36790a21eec6c39c372e92c76e81865005a6ce", "tree": "78a08963a56999d58a854fe466c57f15bc40c0ae", "parents": [ "929096fe9ff1f4b3645cf3919527ab47e8d5e17c" ], "author": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Sun Nov 30 23:59:07 2008 -0500" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Fri Dec 19 04:42:32 2008 -0500" }, "message": "drivers/misc/Makefile, Kconfig: cleanup\n\ntabs-\u003espace and delete unnecessary dummy build-in.o rule.\n\nSuggested-by: Sam Ravnborg \u003csam@ravnborg.org\u003e\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "4e17e1db96474af5620e3259754df4cb1c46521c", "tree": "cc662ebf5158b407495a4939b0ea3d16b93a1b7e", "parents": [ "e0a29382c6f51c278a7e9a788917ff9182f3dba6" ], "author": { "name": "Rodolfo Giometti", "email": "giometti@linux.it", "time": "Wed Nov 12 13:27:12 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Nov 12 17:17:18 2008 -0800" }, "message": "Add c2 port support\n\nC2port implements a two wire serial communication protocol (bit\nbanging) designed to enable in-system programming, debugging, and\nboundary-scan testing on low pin-count Silicon Labs devices.\n\nCurrently this code supports only flash programming through sysfs\ninterface but extensions shoud be easy to add.\n\nSigned-off-by: Rodolfo Giometti \u003cgiometti@linux.it\u003e\nCc: Greg KH \u003cgreg@kroah.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "a412ae3fb90ab49072b82c8cfa1e3e60d2b27005", "tree": "a145d9346dc1a97eb21dc0c86bcaf62c7cd8c359", "parents": [ "c0b4e3ab0c769913438aeb078535ff117eeba5fb" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Wed Nov 12 13:27:04 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Nov 12 17:17:18 2008 -0800" }, "message": "ics932s401: new clock generator chip driver\n\nThe ics932s401 is a clock generator chip. This driver allows users to\nread the current clock outputs.\n\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "709ee531c153038d81b30649b9eeed3c44a4d5cc", "tree": "f1202abe42a374543d19a159a741d14b77d51ce7", "parents": [ "72d31053f62c4bc464c2783974926969614a8649" ], "author": { "name": "Harald Welte", "email": "laforge@gnumonks.org", "time": "Tue Sep 23 17:46:57 2008 +0200" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Wed Sep 24 04:09:00 2008 -0400" }, "message": "panasonic-laptop: add Panasonic Let\u0027s Note laptop extras driver v0.94\n\nThis is a driver for ACPI extras such as hotkeys and backlight\nbrightness control on various Panasonic \"Let\u0027s Note\" series laptop\ncomputers.\n\nIt exports the backlight via the backlight class device API,\nand the hotkeys as input event device. Some more esoteric\nitems like number of installed batteries are exported via sysfs\ndevice attributes.\n\nHotkey events also generate old-style ACPI enents through\n/proc/acpi/event to interoperate with current versions of acpid.\n\nSigned-off-by: Harald Welte \u003claforge@gnumonks.org\u003e\nAcked-by: Henrique de Moraes Holschuh \u003chmh@hmh.eng.br\u003e\nAcked-by: Matthew Garrett \u003cmjg@redhat.com\u003e\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "3d919e5f6b440bb0cc7996eb7628b29be09e6343", "tree": "bc210f908157e9005015987810a6fd820299ea54", "parents": [ "0d39741a27d86d305cc75ba626392be410dcbab9" ], "author": { "name": "Jack Steiner", "email": "steiner@sgi.com", "time": "Tue Jul 29 22:34:01 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Jul 30 09:41:48 2008 -0700" }, "message": "GRU Driver: driver/misc Makefile \u0026 Kconfig changes\n\nDriver/misc changes for the GRU driver\n\nSigned-off-by: Jack Steiner \u003csteiner@sgi.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "62ec30d45ecbb85b5991474c8f04192697687495", "tree": "7dcc84e624b02a130cc016a400b9fd1c5f5563c2", "parents": [ "ac331d158e198d2a91a5b0a3ec4ca9991fdb57af" ], "author": { "name": "Matthew Garrett", "email": "mjg59@srcf.ucam.org", "time": "Fri Jul 25 01:45:39 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jul 25 10:53:28 2008 -0700" }, "message": "misc: add HP WMI laptop extras driver\n\nThis driver adds support for reading and configuring certain information\non modern HP laptops with WMI BIOS interfaces. It supports enabling and\ndisabling the ambient light sensor, querying attached displays and hard\ndrive temperature, sending events on docking and querying the state of the\ndock and toggling the state of the wifi, bluetooth and wwan hardware via\nrfkill. It also makes the little \"(i)\" button work on machines that send\nthat via WMI rather than via the keyboard controller.\n\nSigned-off-by: Matthew Garrett \u003cmjg@redhat.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "89bcb05d9bbf8bd559988bca4f2579defd28d008", "tree": "9bf9ce125be55fbf169628b163dbd1367a840ddf", "parents": [ "d95d62c018209355c0dc998682ff792432aa870c" ], "author": { "name": "David Altobelli", "email": "david.altobelli@hp.com", "time": "Wed Jul 02 09:38:53 2008 -0600" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Mon Jul 21 21:55:02 2008 -0700" }, "message": "HP iLO driver\n\nA driver for the HP iLO/iLO2 management processor, which allows userspace\nprograms to query the management processor. Programs can open a channel\nto the device (/dev/hpilo/dXccbN), and use this to send/receive queries. \nThe O_EXCL open flag is used to indicate that a particular channel cannot\nbe shared between processes. This driver will replace various packages\nHP has shipped, including hprsm and hp-ilo.\n\nSigned-off-by: David Altobelli \u003cdavid.altobelli@hp.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "5411552c707f4b7387ad63141ef3a559e7488091", "tree": "78b6fafe441413397ff33becd4bc144d461bc0a2", "parents": [ "9f1eb99c757939b0b1783f926130993e9c298bae" ], "author": { "name": "Cezary Jackiewicz", "email": "cezary.jackiewicz@gmail.com", "time": "Mon Jun 09 16:22:22 2008 -0700" }, "committer": { "name": "Andi Kleen", "email": "andi@basil.nowhere.org", "time": "Wed Jul 16 23:27:01 2008 +0200" }, "message": "misc,acpi,backlight: compal Laptop Extras\n\nThis is driver for Compal Laptop: FL90/IFL90, based on MSI driver.\n\nThis driver exports a few files in /sys/devices/platform/compal-laptop/:\n lcd_level - screen brightness: contains a single integer in the range 0..7 (rw)\n wlan - wlan subsystem state: contains 0 or 1 (rw)\n bluetooth - bluetooth subsystem state: contains 0 or 1 (rw)\n raw - raw value taken from embedded controller register (ro)\n\nIn addition to these platform device attributes the driver registers itself\nin the Linux backlight control subsystem and is available to userspace under\n/sys/class/backlight/compal-laptop/.\n\nSigned-off-by: Cezary Jackiewicz \u003ccezary.jackiewicz@gmail.com\u003e\nSigned-off-by: Andi Kleen \u003cak@linux.intel.com\u003e\nCc: Richard Purdie \u003crpurdie@rpsys.net\u003e\nCc: Henrique de Moraes Holschuh \u003chmh@hmh.eng.br\u003e\nCc: Len Brown \u003clenb@kernel.org\u003e\nCc: Alexey Starikovskiy \u003caystarik@gmail.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "e59f87966adef2cb03d419530e3ade5159487d6d", "tree": "9cdd798a987f5b71cf2281d6dfd408f15c33bf04", "parents": [ "a01e035ebb552223c03f2d9138ffc73f2d4d3965" ], "author": { "name": "Eric Cooper", "email": "ecc@cmu.edu", "time": "Thu Mar 13 12:55:46 2008 +0100" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Tue Apr 29 10:08:06 2008 -0400" }, "message": "eeepc-laptop: add base driver\n\nThis patch is based on Eric Cooper\u0027s work to clean the original asus_acpi\ngiven by Asus. It\u0027s a platform driver (/sys/devices/platform/eeepc/)\nwich support:\n - hotkeys - wlan on/off - camera on/off - cardr on/off\n\nSigned-off-by: Corentin Chary \u003ccorentincj@iksaif.net\u003e\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "45d9ca492e4bd1522d1b5bd125c2908f1cee3d4a", "tree": "dfbe831a5f71159855c3a252856664411ca53f8a", "parents": [ "9010eff0eadfe4eb60c3f0c71573f0fc505c31e3" ], "author": { "name": "Dean Nelson", "email": "dcn@sgi.com", "time": "Tue Apr 22 14:46:56 2008 -0500" }, "committer": { "name": "Tony Luck", "email": "tony.luck@intel.com", "time": "Tue Apr 22 15:08:17 2008 -0700" }, "message": "[IA64] move XP and XPC to drivers/misc/sgi-xp\n\nMove XPC and XPNET from arch/ia64/sn/kernel to drivers/misc/sgi-xp.\n\nSigned-off-by: Dean Nelson \u003cdcn@sgi.com\u003e\nSigned-off-by: Tony Luck \u003ctony.luck@intel.com\u003e\n" }, { "commit": "03414e57ad9875d0c8bfa5a4a65813cb2157372e", "tree": "836db238d42a6282a5ac2241363eb8b6db190ab7", "parents": [ "3925e6fc1f774048404fdd910b0345b06c699eb4", "3ee08aea72f44a6d176af7a97f3ad0c67bc65a44" ], "author": { "name": "Haavard Skinnemoen", "email": "haavard.skinnemoen@atmel.com", "time": "Sat Apr 19 20:38:13 2008 -0400" }, "committer": { "name": "Haavard Skinnemoen", "email": "haavard.skinnemoen@atmel.com", "time": "Sat Apr 19 20:38:13 2008 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/tclib into base\n" }, { "commit": "e8d31c204e36e019b9134f2a11926cac0fcf9b19", "tree": "2720c1deadb6e57981254ec4120624b8a24dfdcf", "parents": [ "737a460f21febe551ff1d2299b63bae9b154078f" ], "author": { "name": "Jason Wessel", "email": "jason.wessel@windriver.com", "time": "Fri Mar 07 16:34:17 2008 -0600" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Apr 17 20:05:42 2008 +0200" }, "message": "kgdb: add kgdb internal test suite\n\nThis patch adds regression tests for testing the kgdb core and arch\nspecific implementation.\n\nThe kgdb test suite is designed to be built into the kernel and not as\na module because it uses a number of low level kernel and kgdb\nprimitives which should not be exported externally.\n\nThe kgdb test suite is designed as a KGDB I/O module which\nsimulates the communications that a debugger would have with kgdb.\nThe tests are broken up in to a line by line and referenced here as\na \"get\" which is kgdb requesting input and \"put\" which is kgdb\nsending a response.\n\nThe kgdb suite can be invoked from the kernel command line\narguments system or executed dynamically at run time. The test\nsuite uses the variable \"kgdbts\" to obtain the information about\nwhich tests to run and to configure the verbosity level. The\nfollowing are the various characters you can use with the kgdbts\u003d\nline:\n\nWhen using the \"kgdbts\u003d\" you only choose one of the following core\ntest types:\nA \u003d Run all the core tests silently\nV1 \u003d Run all the core tests with minimal output\nV2 \u003d Run all the core tests in debug mode\n\nYou can also specify optional tests:\nN## \u003d Go to sleep with interrupts of for ## seconds\n to test the HW NMI watchdog\nF## \u003d Break at do_fork for ## iterations\nS## \u003d Break at sys_open for ## iterations\n\nNOTE: that the do_fork and sys_open tests are mutually exclusive.\n\nTo invoke the kgdb test suite from boot you use a kernel start\nargument as follows:\n\tkgdbts\u003dV1 kgdbwait\nOr if you wanted to perform the NMI test for 6 seconds and do_fork\ntest for 100 forks, you could use:\n\tkgdbts\u003dV1N6F100 kgdbwait\n\nThe test suite can also be invoked at run time with:\necho kgdbts\u003dV1N6F100 \u003e /sys/module/kgdbts/parameters/kgdbts\nOr as another example:\necho kgdbts\u003dV2 \u003e /sys/module/kgdbts/parameters/kgdbts\n\nWhen developing a new kgdb arch specific implementation or\nusing these tests for the purpose of regression testing,\nseveral invocations are required.\n\n1) Boot with the test suite enabled by using the kernel arguments\n \"kgdbts\u003dV1F100 kgdbwait\"\n ## If kgdb arch specific implementation has NMI use\n \"kgdbts\u003dV1N6F100\n\n2) After the system boot run the basic test.\necho kgdbts\u003dV1 \u003e /sys/module/kgdbts/parameters/kgdbts\n\n3) Run the concurrency tests. It is best to use n+1\n while loops where n is the number of cpus you have\n in your system. The example below uses only two\n loops.\n\n## This tests break points on sys_open\nwhile [ 1 ] ; do find / \u003e /dev/null 2\u003e\u00261 ; done \u0026\nwhile [ 1 ] ; do find / \u003e /dev/null 2\u003e\u00261 ; done \u0026\necho kgdbts\u003dV1S10000 \u003e /sys/module/kgdbts/parameters/kgdbts\nfg # and hit control-c\nfg # and hit control-c\n## This tests break points on do_fork\nwhile [ 1 ] ; do date \u003e /dev/null ; done \u0026\nwhile [ 1 ] ; do date \u003e /dev/null ; done \u0026\necho kgdbts\u003dV1F1000 \u003e /sys/module/kgdbts/parameters/kgdbts\nfg # and hit control-c\n\nSigned-off-by: Jason Wessel \u003cjason.wessel@windriver.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "2a341f5cf57dce9d89b41484a69e88adc6422f6c", "tree": "3534a1f251749b64e7b53f5834800f182a6b4786", "parents": [ "976dde010e513a9c7c3117a32b7b015f84b37430" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Fri Feb 22 17:23:23 2008 -0800" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Tue Mar 04 13:41:23 2008 +0100" }, "message": "atmel_tc library\n\nCreate \u003clinux/atmel_tc.h\u003e based on \u003casm-arm/arch-at91/at91-tc.h\u003e and the\nat91sam9263 and at32ap7000 datasheets. Most AT91 and AT32 SOCs have one\nor two of these TC blocks, which include three 16-bit timers that can be\ninterconnected in various ways.\n\nThese TC blocks can be used for external interfacing (such as PWM and\nmeasurement), or used as somewhat quirky sixteen-bit timers.\n\nChanges relative to the original version:\n * Drop unneeded inclusion of \u003clinux/mutex.h\u003e\n * Support an arbitrary number of TC blocks\n * Return a struct with information about a TC block from\n atmel_tc_alloc() instead of using a combination of return values\n and \"out\" parameters.\n * ioremap() the I/O registers on allocation\n * Look up clocks and irqs for all channels\n * Add \"name\" parameter to atmel_tc_alloc() and use this when\n requesting the iomem resource.\n * Check if the platform provided the necessary resources at probe()\n time instead of when the TCB is allocated.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "9a1e8eb1f0b76b5e72a2343ad881c81b08dd6410", "tree": "f844d0e1316b49fd66cf773009ba2c3d46fcd18f", "parents": [ "c8cece84c9f36410de5164735e909603426e4d5f" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Fri Feb 08 04:21:21 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Feb 08 09:22:38 2008 -0800" }, "message": "Basic PWM driver for AVR32 and AT91\n\nPWM device setup, and a simple PWM driver exposing a programming interface\ngiving access to each channel\u0027s full capabilities. Note that this doesn\u0027t\nsupport starting several channels in synch.\n\n[hskinnemoen@atmel.com: allocate platform device dynamically]\n[hskinnemoen@atmel.com: Kconfig fix]\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\nCc: Andrew Victor \u003clinux@maxim.org.za\u003e\nCc: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "d569d5bb3fd96d2907acaddd7c4ea5cb07d02ab8", "tree": "2ad7fb8bf4ea59cdcc4ab7b98a14cc0eca451d05", "parents": [ "38582a62ecd337de4212004c7d4844899dc57890" ], "author": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Sun Feb 03 15:40:56 2008 -0600" }, "committer": { "name": "James Bottomley", "email": "James.Bottomley@HansenPartnership.com", "time": "Thu Feb 07 18:04:10 2008 -0600" }, "message": "[SCSI] enclosure: add support for enclosure services\n\nThe enclosure misc device is really just a library providing sysfs\nsupport for physical enclosure devices and their components.\n\nSigned-off-by: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\n" }, { "commit": "060195500e0347a6ba8ea89739a9898961eb6f2b", "tree": "5afba4e8daae642d33b7a4daa97d63c54776b786", "parents": [ "26b6f2236615649a0ae6a0de2e9e71a2f9ffeba7", "dd8cd7793781c87be47bbfee65efa3fb5110f898" ], "author": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Thu Feb 07 03:19:43 2008 -0500" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Thu Feb 07 03:19:43 2008 -0500" }, "message": "Merge branches \u0027release\u0027 and \u0027wmi-2.6.25\u0027 into release\n" }, { "commit": "dd8cd7793781c87be47bbfee65efa3fb5110f898", "tree": "72c46c06b5efd490f1da72a5300c9c458c23725c", "parents": [ "745a5d2126926808295742932d0e36d485efa485" ], "author": { "name": "Carlos Corbacho", "email": "carlos@strangeworlds.co.uk", "time": "Tue Feb 05 02:17:15 2008 +0000" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Tue Feb 05 15:07:16 2008 -0500" }, "message": "tc1100-wmi: Add driver for HP Compaq TC1100 Tablets\n\nThis is based on the 2004 out-of-tree work of Jamey Hicks, to add\nsupport via WMI for controlling the jog dial and wireless on these\ntablets.\n\nv1:\n\nOriginal release\n\nv2:\n\nAs per Joshua Wise\u0027s comments, change bluetooth to jogdial (an error from\nthe original driver).\n\nSigned-off-by: Carlos Corbacho \u003ccarlos@strangeworlds.co.uk\u003e\nCC: Matthew Garrett \u003cmjg59@srcf.ucam.org\u003e\nCC: Jamey Hicks \u003cjamey.hicks@nokia.com\u003e\nCC: Joshua Wise \u003cjoshua@joshuawise.com\u003e\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "745a5d2126926808295742932d0e36d485efa485", "tree": "a8de440fe3c6caa4a06cda2960e77a351ca3ff83", "parents": [ "bff431e49ff531a343fbb2b4426e313000844f32" ], "author": { "name": "Carlos Corbacho", "email": "carlos@strangeworlds.co.uk", "time": "Tue Feb 05 02:17:10 2008 +0000" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Tue Feb 05 15:07:00 2008 -0500" }, "message": "acer-wmi: Add driver for newer Acer laptops\n\nThis is a driver for newer Acer (and Wistron) laptops. It adds wireless\nradio and bluetooth control, and on some laptops, exposes the mail LED and\nLCD backlight.\n\nv1:\n\n* Initial release\n\nv2:\n\n* Replace left over ACPI references with WMI\n* Add GUID based autoloading (depends on future work to WMI)\n* Add DMI based autoloading (backup solution until WMI sysfs/ class\n work is available)\n* Checkpatch fixes\n\nv3:\n\n* Add new EC quirks for Aspire 3100 \u0026 5100, and Extensa 5220\n\nv4:\n\n* Simplified internal handling of WMID and AMW0 devices\n* Add autodetection for bluetooth and maximum brightness on AMW0 V2 and\n WMID laptops.\n\nv5:\n\n* Add EC quirk for Medion MD 98000\n* Add autodetection for AMW0, and mail LED on AMW0 and AMW0 V2.\n* Improve error handling\n* Fix AMW0 V2 bluetooth and wireless, by using both WMID and AMW0 methods\n to ensure that the correct value is always set.\n\nv6:\n\n* Fix \u0027use before initialisation\u0027 bug with quirks.\n\nv7\n\n* Fix bug on AMW0 where acer-wmi would exit if a mail LED was not\n detected.\n* Add Acer Aspire 9110 mail LED support\n* Fix section mismatch warnings\n\nSigned-off-by: Carlos Corbacho \u003ccarlos@strangeworlds.co.uk\u003e\nCC: Matthew Garrett \u003cmjg59@srcf.ucam.org\u003e\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "cc0573b3250214034062ddf8c64359596d8af521", "tree": "b6992d9c4101ce7ce92a748b0ada486350eac2de", "parents": [ "041d4bbf128f645fe53bb22309efb9db14dbf5b5" ], "author": { "name": "Thomas Sujith", "email": "sujith.thomas@intel.com", "time": "Fri Jan 25 11:45:44 2008 +0800" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Fri Feb 01 23:20:57 2008 -0500" }, "message": "intel_menlo: introduce new platform specific driver\n\nIntel menlow platform specific driver for thermal management extension.\n\nSigned-off-by: Thomas Sujith \u003csujith.thomas@intel.com\u003e\nSigned-off-by: Zhang Rui \u003crui.zhang@intel.com\u003e\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "c4ec20717313daafba59225f812db89595952b83", "tree": "253337453b1dc965c40668e4949337ed1c46cab7", "parents": [ "ec2626815bf9a9922e49820b03e670e833f3ca3c", "00a2b433557f10736e8a02de619b3e9052556c12" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Oct 19 13:12:46 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Oct 19 13:12:46 2007 -0700" }, "message": "Merge branch \u0027release\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6\n\n* \u0027release\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (41 commits)\n ACPICA: hw: Don\u0027t carry spinlock over suspend\n ACPICA: hw: remove use_lock flag from acpi_hw_register_{read, write}\n ACPI: cpuidle: port idle timer suspend/resume workaround to cpuidle\n ACPI: clean up acpi_enter_sleep_state_prep\n Hibernation: Make sure that ACPI is enabled in acpi_hibernation_finish\n ACPI: suppress uninitialized var warning\n cpuidle: consolidate 2.6.22 cpuidle branch into one patch\n ACPI: thinkpad-acpi: skip blanks before the data when parsing sysfs\n ACPI: AC: Add sysfs interface\n ACPI: SBS: Add sysfs alarm\n ACPI: SBS: Add ACPI_PROCFS around procfs handling code.\n ACPI: SBS: Add support for power_supply class (and sysfs)\n ACPI: SBS: Make SBS reads table-driven.\n ACPI: SBS: Simplify data structures in SBS\n ACPI: SBS: Split host controller (ACPI0001) from SBS driver (ACPI0002)\n ACPI: EC: Add new query handler to list head.\n ACPI: Add acpi_bus_generate_event4() function\n ACPI: Battery: add sysfs alarm\n ACPI: Battery: Add sysfs support\n ACPI: Battery: Misc clean-ups, no functional changes\n ...\n\nFix up conflicts in drivers/misc/thinkpad_acpi.[ch] manually\n" }, { "commit": "eb1f2930609bb01bb3a970f145b5004e5163742a", "tree": "c22f195dbc5f58bba7cd82c4a09136b2a553086e", "parents": [ "94f582f82a85a941678c80c60a3baa8187c74217" ], "author": { "name": "Hans-Christian Egtvedt", "email": "hcegtvedt@atmel.com", "time": "Tue Oct 16 23:26:11 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Wed Oct 17 08:42:47 2007 -0700" }, "message": "Driver for the Atmel on-chip SSC on AT32AP and AT91\n\nThe Synchronous Serial Controller (SSC) on Atmel microprocessors are\ncapable of tranceiving many frame based protocols, like I2S. Tested on the\nAT32AP7000/ATSTK1000.\n\nThis driver is used in the ALSA sound driver for the AT73C213 external DAC\non the ATSTK1000 development board for AVR32. This sound driver will be\nsubmitted soon.\n\nHardware documentation can be found in the AT32AP7000 data sheet, which can\nbe downloaded from\nhttp://www.atmel.com/dyn/products/datasheets.asp?family_id\u003d682\n\n[akpm@linux-foundation.org: init spinlock at compile time]\nSigned-off-by: Hans-Christian Egtvedt \u003chcegtvedt@atmel.com\u003e\nAcked-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nCc: Andrew Victor \u003candrew@sanpeople.com\u003e\nCc: Patrice Vilchez \u003cpatrice.vilchez@rfo.atmel.com\u003e\nCc: Nicolas Ferre \u003cnicolas.ferre@rfo.atmel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "d0482533c73a8685f7ce0951a10280cfd58b8825", "tree": "6a39c3f8ded50840ff2d8fc48f4c339307af91dd", "parents": [ "b07d68b5ca4d55a16fab223d63d5fb36f89ff42f" ], "author": { "name": "Jonathan Woithe", "email": "jwoithe@physics.adelaide.edu.au", "time": "Wed Aug 29 15:58:19 2007 +0930" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Wed Aug 29 03:27:25 2007 -0400" }, "message": "fujitsu-laptop: create Fujitsu laptop platform specific driver\n\nSigned-off-by: Jonathan Woithe \u003cjwoithe@physics.adelaide.edu.au\u003e\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "9467d64b0e88763914c01f71ddf591b166c4f526", "tree": "594dca21215cff58b17189ed50071faa154b2f64", "parents": [ "7dcca30a32aadb0520417521b0c44f42d09fe05c" ], "author": { "name": "Ivo van Doorn", "email": "ivdoorn@gmail.com", "time": "Fri May 11 15:59:40 2007 -0400" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sun Jul 08 22:16:36 2007 -0400" }, "message": "[PATCH] Add 93cx6 eeprom library\n\nThis patch adds a library for reading from 93cx6 eeproms.\n\nSigned-off-by: Michael Wu \u003cflamingice@sourmilk.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2bcb1b7de9eeea969a25d5f2b4511195cca9f2a2", "tree": "694e390f1170bcf4f66775dcaa8ae25adf769e9e", "parents": [ "190045d53b9a8341e8600d6eb468b6081e903afb" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Wed Jul 04 15:24:39 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Wed Jul 04 15:24:39 2007 -0700" }, "message": "Remove the blink driver\n\nYeah, we could have just disabled it, but there\u0027s work on a new one that\nisn\u0027t as fundamentally broken, so there really doesn\u0027t seem to be any\npoint in keeping it around.\n\nThe recent timer cleanup broke the only valid use, and when I say\n\"valid\", I obviously mean \"totally broken\". So it\u0027s not like it works,\nor really even can work in the current format that uses the unsafe\n\"panic\" LED blinking routines..\n\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "cef2cf07273d12ac3453d2baff096423f17b7403", "tree": "807ce95b91d1a09f449d61301f1148c85d7818db", "parents": [ "6f7f02e78a75a09195d963e0392b195bc2d55c5c" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Tue May 08 00:31:45 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue May 08 11:15:14 2007 -0700" }, "message": "Misc: add sensable phantom driver\n\nAdd sensable phantom driver\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "f038f9a361a764ed013447174b7170073f89cbe9", "tree": "63963a1c5e8e0228d601637e9c96ebffd152a942", "parents": [ "6b9686211374a9751ae70a95fd1fcfb8c2a80698" ], "author": { "name": "Andi Kleen", "email": "ak@novell.com", "time": "Tue May 08 00:29:55 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue May 08 11:15:10 2007 -0700" }, "message": "Add keyboard blink driver\n\nSimple driver that blinks the keyboard LEDs when loaded. Useful for\nchecking that the kernel is still alive or for crashdumping\n\nSigned-off-by: Andi Kleen \u003cak@suse.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "85998248b2e8c6ae7d3ad1fa7b059aed22205ec4", "tree": "51d1660479b6f5e8484aafb0ca767aa94c612bc7", "parents": [ "f21f85de4b3b9ad4a671fb19a889c16db2ea38b2" ], "author": { "name": "Henrique de Moraes Holschuh", "email": "hmh@hmh.eng.br", "time": "Thu Mar 29 01:58:41 2007 -0300" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Fri Mar 30 15:35:42 2007 -0400" }, "message": "ACPI: thinkpad-acpi: cleanup Kconfig for thinkpad-acpi\n\nSince ibm-acpi was renamed to thinkpad-acpi, rename and update its Kconfig\nentries and Kconfig-related symbols accordingly.\n\nSigned-off-by: Henrique de Moraes Holschuh \u003chmh@hmh.eng.br\u003e\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "f21f85de4b3b9ad4a671fb19a889c16db2ea38b2", "tree": "b6bceb2c727eab930f7df2a30f49e21fb333a64e", "parents": [ "3ede41c718c7845905231019e42d05a3ed329515" ], "author": { "name": "Henrique de Moraes Holschuh", "email": "hmh@hmh.eng.br", "time": "Thu Mar 29 01:58:40 2007 -0300" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Fri Mar 30 15:35:41 2007 -0400" }, "message": "ACPI: ibm-acpi: rename driver to thinkpad-acpi\n\nRename the ibm-acpi driver to thinkpad-acpi. ThinkPads are not even made\nby IBM anymore, so it is high time to rename the driver...\n\nThe name thinkpad-acpi was used sometime ago by a thinkpad-specific hotkey\ndriver by Erik Rigtorp, around the 2.6.8-2.6.10 time frame. The driver\napparently never got merged into mainline (it did make some trips through\n-mm). ibm-acpi was merged soon after, making its debut in 2.6.10.\n\nThe reuse of the thinkpad-acpi name shouldn\u0027t be a problem as far as user\nconfusion goes, as Erik\u0027s thinkpad-acpi apparently didn\u0027t get widespread\nuse in the Linux ThinkPad community and most hits for thinkpad-acpi in\ngoogle point to ibm-acpi anyway.\n\nErik, if you read this, please consider the reuse of the thinkpad-acpi name\nas a compliment to your effort to make ThinkPads more useful to all of us.\n\nSigned-off-by: Henrique de Moraes Holschuh \u003chmh@hmh.eng.br\u003e\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "3ede41c718c7845905231019e42d05a3ed329515", "tree": "6cac5d3152f8fa55198544556cf6f03bae5f3bb6", "parents": [ "38f996ed21089fa4ae40526a5f428e3c792ea561" ], "author": { "name": "Henrique de Moraes Holschuh", "email": "hmh@hmh.eng.br", "time": "Fri Mar 23 17:34:00 2007 -0300" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Sun Mar 25 23:37:55 2007 -0400" }, "message": "ACPI: ibm-acpi: move driver to drivers/misc hierarchy\n\nibm-acpi is not an ACPICA driver, so move it to drivers/misc as per Len\nBrown\u0027s request.\n\nSigned-off-by: Henrique de Moraes Holschuh \u003chmh@hmh.eng.br\u003e\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "9cdd79c9b99873d600d397fda012fc3f57cc2776", "tree": "cead6543c1a53bdadee8953391a80d6c264f911b", "parents": [ "c0cd79d11412969b6b8fa1624cdc1277db82e2fe", "156c221b728ccd4657c359cd25428946856beca8" ], "author": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Fri Feb 16 22:10:55 2007 -0500" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Fri Feb 16 22:10:55 2007 -0500" }, "message": "Pull sony into release branch\n" }, { "commit": "91fbc1d311c1b8b71203b96f1a0629da7360eb4c", "tree": "abfece8382c2758bec65889443396d3a2f7d66c6", "parents": [ "7df03b82ed081777d2393ff8a5fb9d4a3a560f26" ], "author": { "name": "Mattia Dongili", "email": "malattia@linux.it", "time": "Wed Feb 07 20:01:53 2007 +0100" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Tue Feb 13 03:06:53 2007 -0500" }, "message": "sony-laptop: create from sony_acpi\n\nMove drivers/acpi/sony_acpi.c to drivers/misc/sony-laptop.c with all the\nnecessary configuration.\nThe SONY_LAPTOP config option substitutes the old ACPI_SONY and is \u0027default n\u0027\nnow.\n\nSigned-off-by: Mattia Dongili \u003cmalattia@linux.it\u003e\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "85091b718969be7b8e6f795af7e264b8afcd7a6d", "tree": "d75b4598e47dee15b2ee22c26107f68017cb431e", "parents": [ "5263bf65d6342e12ab716db8e529501670979321" ], "author": { "name": "Corentin Chary", "email": "corentincj@iksaif.net", "time": "Fri Jan 26 14:04:30 2007 +0100" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Tue Jan 30 01:36:57 2007 -0500" }, "message": "asus-laptop: add base driver\n\nAdds the new driver and make ASUS_LAPTOP and ACPI_ASUS\nincompatible. It may be strange to use ASUS_CREATE_DEVICE_ATTR\nand ASUS_SET_DEVICE_ATTR now, but these macro will be very\nusefull in next patchs. ASUS_HANDLE and ASUS_HANDLE_INIT comes\nfrom IBM_HANDLE and IBM_HANDLE_INIT, with some modification,\nand will also be used in next patchs.\n\nSigned-off-by: Corentin Chary \u003ccorentincj@iksaif.net\u003e\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "59f148005cfd3d41537a4b872c266213d5fe4dc6", "tree": "1e769ca80218a39417f7d45759e1bd2a4dbf6452", "parents": [ "107d5a72f2c6a6819b66eebcb0281c7a67b6baaa" ], "author": { "name": "Brent Casavant", "email": "bcasavan@sgi.com", "time": "Tue Oct 17 00:09:25 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Tue Oct 17 08:18:42 2006 -0700" }, "message": "[PATCH] ioc4: Enable build on non-SN2\n\nThe SGI PCI-RT card, based on the SGI IOC4 chip, will be made available on\nAltix XE (x86_64) platforms in the near future. As such it is now a\nmisnomer for the IOC4 base device driver to live under drivers/sn, and\nwould complicate builds for non-SN2.\n\nThis patch moves the IOC4 base driver code from drivers/sn to drivers/misc,\nand updates the associated Makefiles and Kconfig files to allow building on\nnon-SN2 configs. Due to the resulting change in link order, it is now\nnecessary to use late_initcall() for IOC4 subdriver initialization.\n\n[akpm@osdl.org: __udivdi3 fix]\n[akpm@osdl.org: fix default in Kconfig]\nAcked-by: Pat Gefre \u003cpfg@sgi.com\u003e\nAcked-by: Jeremy Higdon \u003cjeremy@sgi.com\u003e\nSigned-off-by: Brent Casavant \u003cbcasavan@sgi.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "8c4c731a89ea6458001f48033f8988447736fb38", "tree": "dd1f7533539e373a60627a6e0d7290365d1fb9db", "parents": [ "ab9e43c640b2b7d6e296fc39dd8cbcb96f9ae393" ], "author": { "name": "Lennart Poettering", "email": "mzxreary@0pointer.de", "time": "Fri Oct 06 01:27:02 2006 -0400" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Sat Oct 14 01:48:29 2006 -0400" }, "message": "MSI S270 Laptop support: backlight, wlan, bluetooth states\n\nCreate a driver to support the platform-specific features\nof MSI S270 laptops (and maybe other MSI laptops).\nThis driver implements a backlight device for controlling LCD brightness\n(/sys/class/backlight/msi-laptop-bl/).\nIn addition it allows access to the WLAN and Bluetooth states\nthrough a platform driver (/sys/devices/platform/msi-laptop-pf/).\n\nSigned-off-by: Lennart Poettering \u003cmzxreary@0pointer.de\u003e\nCc: Dmitry Torokhov \u003cdtor@mail.ru\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "f9565129993446e16678cfc4d9c7f3b7e75eecbd", "tree": "13b052ecee7b4713359b3333ed87fc9ada590727", "parents": [ "4020f2d7f0b0e68b92bec9a3e1f4a54a7a9dc672" ], "author": { "name": "Alex Dubov", "email": "oakad@yahoo.com", "time": "Wed Oct 04 02:15:38 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Wed Oct 04 07:55:14 2006 -0700" }, "message": "[PATCH] mmc: driver for TI FlashMedia card reader - Kconfig/Makefile\n\nSigned-off-by: Alex Dubov \u003coakad@yahoo.com\u003e\nCc: Daniel Qarras \u003cdqarras@yahoo.com\u003e\nAcked-by: Pierre Ossman \u003cdrzeus@drzeus.cx\u003e\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "8bb31b9d5340ed3dfef45d322f59fcf18a0d598b", "tree": "b0c225ebc5ed8ca6b0ad3c10b09f715d9ad67ad9", "parents": [ "99219a3fbc2dcf2eaa954f7b2ac27299fd7894cd" ], "author": { "name": "Ankita Garg", "email": "ankita@in.ibm.com", "time": "Mon Oct 02 02:17:36 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Mon Oct 02 07:57:16 2006 -0700" }, "message": "[PATCH] Linux Kernel Dump Test Module\n\nA simple module to test Linux Kernel Dump mechanism. This module uses\njprobes to install/activate pre-defined crash points. At different crash\npoints, various types of crashing scenarios are created like a BUG(),\npanic(), exception, recursive loop and stack overflow. The user can\nactivate a crash point with specific type by providing parameters at the\ntime of module insertion. Please see the file header for usage\ninformation. The module is based on the Linux Kernel Dump Test Tool by\nFernando \u003chttp://lkdtt.sourceforge.net\u003e.\n\nThis module could be merged with mainline. Jprobes is used here so that the\ncontext in which crash point is hit, could be maintained. This implements\nall the crash points as done by LKDTT except the one in the middle of\ntasklet_action().\n\nSigned-off-by: Ankita Garg \u003cankita@in.ibm.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d", "parents": [], "author": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n" } ] }