)]}' { "log": [ { "commit": "bb1ed5ec370e48381270238ee1563bc7daa6578b", "tree": "2235ff95e238e0e4a32c3a8051932f7c52ee7126", "parents": [ "932410e2e01c52108e6d8e1df3b6c3db135f3205", "f6fdcaa0ca320e7b8c19e5edd343629c94e9cdb0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 18:49:18 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 18:49:18 2012 -0700" }, "message": "Merge \"power: pm8921-bms: scale rbatt with temperature and soc\" into msm-3.0" }, { "commit": "f35ec4f77970567f718473327b203cdae043972d", "tree": "cac1e3355392cfa379b2ba8942e281365befb64b", "parents": [ "143dbf1cf6392624bbfdde6e18c7fb1246614f59", "6e36241ec29f65161c752597e61a60f9b7e9e972" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 15:03:04 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 15:03:04 2012 -0700" }, "message": "Merge \"msm: kgsl: Add a pwrscale policy to interact with msm_dcvs\" into msm-3.0" }, { "commit": "d83cad4f0b98c783634a90835755ea55e6679279", "tree": "f0b4711e763b176d6d8f8716a4136eb81f7c7400", "parents": [ "e288a9f4773fb4f0bba72a1de9f0266ea45e4f5e", "135f3e094ea59c05802389c3b7ecc27074f9209c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 09:07:37 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 09:07:37 2012 -0700" }, "message": "Merge changes Idd7662db,I1fbefb35 into msm-3.0\n\n* changes:\n mfd: pm8xxx-misc: Make pm8xxx_preload_dVdd a no-op for PM8901 rev 2.3\n mfd: pmic8901: Add revision ID values for PM8901 rev 2.2 and 2.3\n" }, { "commit": "cf491a6d6a0f89a6020547d799bc2656c4993e99", "tree": "76f3607d1cc80d590d428aae6dd2c6ccf60ad72d", "parents": [ "c62852fc5c12cd1bacae298abd4552ad172ab77e", "aae56f94a1e1409a5bdaf15860dc0c9924679425" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 09:07:25 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 09:07:25 2012 -0700" }, "message": "Merge \"pm8xxx: misc: correct typo for aux clock division\" into msm-3.0" }, { "commit": "e41d1db1e9e96a1f7b6eecbe9b84cc1092ce3f81", "tree": "5c9ce5d601fd2c9a2f97179785803ecdbcc5d4d0", "parents": [ "c62852fc5c12cd1bacae298abd4552ad172ab77e" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Apr 05 10:08:10 2012 -0700" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Apr 05 11:21:30 2012 -0700" }, "message": "mfd: pmic8901: Add revision ID values for PM8901 rev 2.2 and 2.3\n\nAdd revision ID values to identify PM8901 rev 2.2 and rev 2.3.\nAlso modify the version printing in the pmic8901 driver to utilize\na human readable format.\n\nChange-Id: I1fbefb35584ec19dfe0983eaff3c5192f1762392\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "6e36241ec29f65161c752597e61a60f9b7e9e972", "tree": "cae9606cba3f515371654a91a64ceeb4fdad3174", "parents": [ "74f8797e17dd66337d13ffdf8ec34309d33a9187" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Fri Dec 09 16:21:42 2011 -0700" }, "committer": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Thu Apr 05 09:36:42 2012 -0700" }, "message": "msm: kgsl: Add a pwrscale policy to interact with msm_dcvs\n\nThis pwrscale policy provides per-core idle information to the\nmsm_dcvs driver. It accepts frequency updates from the msm_dcvs\ndriver and updates the core frequency as needed.\n\nChange-Id: I201cfcb6ceedc19c27f7848781813d9c477f9f83\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "aae56f94a1e1409a5bdaf15860dc0c9924679425", "tree": "f9d5b45a95ece165b364cc50761629e45ef23731", "parents": [ "d487812cb7bb16bd4260d9505dc697d001afe24a" ], "author": { "name": "Amy Maloche", "email": "amaloche@codeaurora.org", "time": "Wed Apr 04 11:07:43 2012 -0700" }, "committer": { "name": "Amy Maloche", "email": "amaloche@codeaurora.org", "time": "Wed Apr 04 11:12:05 2012 -0700" }, "message": "pm8xxx: misc: correct typo for aux clock division\n\nTypo where 0 should be O in \"XO\"\n\nChange-Id: I23320a360e62e3027f79fffcabd0a7b4c7f2904c\nSigned-off-by: Amy Maloche \u003camaloche@codeaurora.org\u003e\n" }, { "commit": "377f5f6b804b5d68bc49b80b8eb642508ff9cd52", "tree": "019490dae92847ae4612ee396f6ab9bccb92fbb8", "parents": [ "3d7b6872be27e27bc564235f228e7a330c4784b1", "ba093a2c7c6aec396d3d7c9aa541dc839691d9d7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Apr 04 09:17:47 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Apr 04 09:17:47 2012 -0700" }, "message": "Merge \"include: msm_mdp: Add new histogram IOCTL parameters\" into msm-3.0" }, { "commit": "636bbcec30a88eed634de5198b40174a34c450d8", "tree": "f929c8b2f83a49a36a0e4f59bc8df84cf173f3b2", "parents": [ "63c88f8df5ec901e24e75faf7c1d35f8a6720d7b", "a0352b52c20af1ae5c0518c3261893720dd5d767" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Apr 03 12:07:17 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Apr 03 12:07:17 2012 -0700" }, "message": "Merge changes I6b6174e2,I8103f1e5 into msm-3.0\n\n* changes:\n msm: board-8930-pmic: Add data to control RGB leds\n leds: pm8xxx: Add support for RGB leds\n" }, { "commit": "ba093a2c7c6aec396d3d7c9aa541dc839691d9d7", "tree": "178633df969a49593d3d1b33143a9dd431e71726", "parents": [ "63c88f8df5ec901e24e75faf7c1d35f8a6720d7b" ], "author": { "name": "Carl Vanderlip", "email": "carlv@codeaurora.org", "time": "Tue Nov 22 13:59:59 2011 -0800" }, "committer": { "name": "Carl Vanderlip", "email": "carlv@codeaurora.org", "time": "Tue Apr 03 10:47:36 2012 -0700" }, "message": "include: msm_mdp: Add new histogram IOCTL parameters\n\nChange the histogram IOCTLS to accept new data structures as well as read\nfrom userspace when required. These changes are required so that other\nhistogram blocks can be read instead of the current DMA-P only\nimplementation.\n\nChange-Id: Icaf23dd53c3b9e2106e1518d647197d7b87800d0\nSigned-off-by: Carl Vanderlip \u003ccarlv@codeaurora.org\u003e\n" }, { "commit": "c17c373c46d6b38f86143abe1ecceeec66682089", "tree": "9412d0efcb8a9fda41aeb5095dccbc7ed1b4609c", "parents": [ "65ce19ffbda1aa039e7c88635a201467b1cab07f" ], "author": { "name": "Amy Maloche", "email": "amaloche@codeaurora.org", "time": "Mon Feb 27 18:34:07 2012 -0800" }, "committer": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Tue Apr 03 14:36:50 2012 +0530" }, "message": "leds: pm8xxx: Add support for RGB leds\n\npm8038 is the first PMIC chip to support RGB led, so\ndriver framework must be added to support it.\n\nChange-Id: I8103f1e5ec37cdd8718a3daa10587f56a44729c6\nSigned-off-by: Amy Maloche \u003camaloche@codeaurora.org\u003e\n" }, { "commit": "83b00655624f3344d772b6e8afcff6b58026285e", "tree": "d1de2567e1141bbb040722c3dd307ff0ee6dfd53", "parents": [ "34fee768a585e05a0b6d47da253b7d55fe3dd765" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Fri Mar 30 14:19:38 2012 -0700" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Mon Apr 02 15:04:28 2012 -0700" }, "message": "regulator: stub: Export init function for early probe\n\nSome usecases of stub-regulator require the regulator devices to\nbe probed early on. As a consequence, allow for stub-regulator\nto be added at a custom time by the platform code. Simply\nchanging the init level of this driver is not enough. We must\nallow for other drivers added at the same init level to be\ndependencies or dependents of this driver.\n\nChange-Id: Ifd57d0e77e25f73dfb16c45c6774a382873ec44a\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "8dbbefcf388d937ce5c4eefde57240085b6fb171", "tree": "c465898fb7dd64c4a7d60a9e484eb7e4d825b5b8", "parents": [ "2c318055401992db14414cdb4deedefffcb1b046", "c2ee83ab65b6997b3e528c5401b9aa2148800d46" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Apr 02 12:29:26 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Apr 02 12:29:26 2012 -0700" }, "message": "Merge \"WLAN: WCN1314: Add shutdown handler support.\" into msm-3.0" }, { "commit": "b62b71c9fa53c3dd4f59999cf43089236dcf1c02", "tree": "25acfa43cd7149d075fd49a18403f829af336e46", "parents": [ "96627ee8168af5e5e907a271b89a3fe281d31aec", "6e611f2b8655684f578cb975fa0ebfd031b45d69" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Mar 31 23:47:51 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Mar 31 23:47:51 2012 -0700" }, "message": "Merge \"Revert \"mmc: sdio: optimized SDIO IRQ handling for single irq\"\" into msm-3.0" }, { "commit": "30ad10bf5b5944d4cdcbc428f47dcd3113e76a81", "tree": "b5348af199128f813e1a945648d3cf2a54c5eb21", "parents": [ "d4a9394f02ee7e9da56bb338c2cc99604d70c534" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Thu Mar 01 14:51:04 2012 -0800" }, "committer": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Sat Mar 31 12:42:29 2012 -0700" }, "message": "Revert \"usb: msm_otg: Migrate to clock apis for XO voting\"\n\nThis reverts commit 7dd2266ae3d3f1d2cb93d1d3bb40aecf23821e76.\n\nIt was a mistake to move the usb driver to the clock apis for XO\nbuffer voting. Due to an RPM design CXO and D0 are the same but\nwe would like to hide that from the users of the buffers.\nTherefore the msm_xo driver itself remaps the D0 buffer request\nto the cxo clock until the RPM is fixed.\n\nChange-Id: I230de55d30a49fa5bcf0d07f40453f1e09c4a9b1\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "651b60bdba019936fe7e2786d6c02b043dc6ce09", "tree": "17d7b9443b15262606978aafd9b2cedd48fd7597", "parents": [ "206ce558b51e1a387a96984ce49f9bcde414306d", "f8f603b5ca5a04f429c5f0e51788f930bfedffb6" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Mar 31 04:33:15 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Mar 31 04:33:15 2012 -0700" }, "message": "Merge changes Ic81e8534,Ie1b2f8fe into msm-3.0\n\n* changes:\n slim_msm: Add Device Tree support for Qualcomm SLIMBUS controller\n slimbus: Add Device Tree support for SLIMBUS\n" }, { "commit": "fcda1ca507aae3d66f6f4bfcfc2ed47f8b45f0b3", "tree": "686fc637567b8f0e343be1936bf904158586f949", "parents": [ "5f0c64158d090a82f2a76e4e7dd8483a4dd862fc", "949ebbe52c5e0dad01460b42a478c58fb40396a5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Mar 31 01:14:46 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Mar 31 01:14:46 2012 -0700" }, "message": "Merge changes I124a4ba1,Idf7c4e53,I09411d46,I4f270a41,Icd7e6002,I56a14e86,Id91ac5e6,Ia1abd831 into msm-3.0\n\n* changes:\n regulator: map consumer regulator based on device tree\n regulator: pass additional of_node to regulator_register()\n regulator: adapt fixed regulator driver to dt\n regulator: helper routine to extract regulator_init_data\n regulator: Constify constraints name\n regulator: Properly register dummy regulator driver\n dt: add empty dt helpers for non-dt build\n copper: regulator-stub: Add devices for Krait Power Control\n" }, { "commit": "f6fdcaa0ca320e7b8c19e5edd343629c94e9cdb0", "tree": "e565a3825871c18a66de826497cddb02f9a9275f", "parents": [ "26417da62764b0acdd5d5b9bc9237a024d10fad8" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Feb 27 00:10:10 2012 -0800" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Mar 30 16:37:33 2012 -0700" }, "message": "power: pm8921-bms: scale rbatt with temperature and soc\n\nThe rbatt was observed to change with battery temperature and the state\nof charge of the battery. Update the BMS driver and the battery data\nto include and use a rbatt table indicating its changes w.r.t temperature\nand state of charge.\n\nOn similar lines provide api for other systems to query battery resistance.\n\nChange-Id: I681675db537b70919e6e0437bd400ce53bf97096\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "7e42e7fed042f8ef7a075ffeadb2c4ba104ac90d", "tree": "55f4cb6b41a8e8ce663ffac336ae8779e58c9751", "parents": [ "470fbb0abdfc7abdc0726ce2bc6f930ba9024b0a" ], "author": { "name": "Sagar Dharia", "email": "sdharia@codeaurora.org", "time": "Wed Mar 21 15:29:04 2012 -0600" }, "committer": { "name": "Sagar Dharia", "email": "sdharia@codeaurora.org", "time": "Fri Mar 30 11:09:37 2012 -0600" }, "message": "slimbus: Add Device Tree support for SLIMBUS\n\nSlave devices can be added by listing them as child of a SLIMBUS\ncontroller of_node in the Device Tree.\nIt is required to specify elemental address, and name of the slave\ndevice.\n\nChange-Id: Ie1b2f8fe58988f0237547a84f1bbb14ce4733eff\nSigned-off-by: Sagar Dharia \u003csdharia@codeaurora.org\u003e\n" }, { "commit": "197392cbecc1ca51478dda19c5542a4391398aee", "tree": "65c1593406f6948673cc026e2a7ad58285016c46", "parents": [ "dc2c12f779351b3bf5197c6e252b97166d834a6c", "41dd3976664e02bcdea369344a45cabb5260502a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Mar 30 07:57:31 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Mar 30 07:57:31 2012 -0700" }, "message": "Merge changes Ifd0a2206,I385fb80e into msm-3.0\n\n* changes:\n board-qrd7627a: Add ft5x06 device for QRD7\n input: atmel_mxt_ts: Fix to reject coordinates outside active touch area\n" }, { "commit": "c2ee83ab65b6997b3e528c5401b9aa2148800d46", "tree": "dc63c722ec759e077fcf31b9d726b94ae416085c", "parents": [ "a54734678ff9cb97938b9f7648547174f3b118e4" ], "author": { "name": "Pavan Kumar", "email": "pavan@codeaurora.org", "time": "Fri Mar 30 13:39:35 2012 +0530" }, "committer": { "name": "Pavan Kumar", "email": "pavan@codeaurora.org", "time": "Fri Mar 30 13:39:35 2012 +0530" }, "message": "WLAN: WCN1314: Add shutdown handler support.\n\nFunction driver can register for shutdown notifications.\nBefore shutdown, lets notify the same to function driver\nand allow it to cleanup.\n\nChange-Id: Ie95342ac37e822d1679370597a22ba222b199686\nSigned-off-by: Pavan kumar \u003cpavan@codeaurora.org\u003e\n" }, { "commit": "56a1a5dc153fc3b07f17d6970d31734f9f40a041", "tree": "5061b0275756775734642be0035751f95dc12889", "parents": [ "a54734678ff9cb97938b9f7648547174f3b118e4" ], "author": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Thu Feb 23 12:05:13 2012 -0800" }, "committer": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Fri Mar 30 13:12:34 2012 +0530" }, "message": "input: atmel_mxt_ts: Fix to reject coordinates outside active touch area\n\nFirmware reports minimum/maximum coordinates when touches are\nfrom outside of active area. Generate a release event in this\ncase to handle touches that are going to inactive area. Add\npdata entries for minimum values and check before reporting\nthe coordinates to userspace.\n\nCRs-fixed: 326858\nChange-Id: I385fb80eb670e539b45d232c04969c4502cdf65a\nSigned-off-by: Mohan Pallaka \u003cmpallaka@codeaurora.org\u003e\n" }, { "commit": "a76e99abc558aed633ba28ff61c5328116292bf3", "tree": "60f7677f0baafa00825accc1214839246b3e78dd", "parents": [ "a54734678ff9cb97938b9f7648547174f3b118e4", "1d05f993784973189395051cc711fdd6dd5eb389" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Fri Mar 30 00:09:34 2012 -0700" }, "committer": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Fri Mar 30 00:09:34 2012 -0700" }, "message": "Merge branch \u0027Linux 3.0.21\u0027 into msm-3.0\n\nMerge Upstream\u0027s stable 3.0.21 branch into msm-3.0\nThis consists 814 commits and some merge conflicts.\n\nThe merge conflicts are because of some local changes to\nmsm-3.0 as well as some conflicts between google\u0027s tree and\nthe upstream tree.\n\nConflicts:\n\tarch/arm/kernel/head.S\n\tdrivers/bluetooth/ath3k.c\n\tdrivers/bluetooth/btusb.c\n\tdrivers/mmc/core/core.c\n\tdrivers/tty/serial/serial_core.c\n\tdrivers/usb/host/ehci-hub.c\n\tdrivers/usb/serial/qcserial.c\n\tfs/namespace.c\n\tfs/proc/base.c\n\nChange-Id: I62e2edbe213f84915e27f8cd6e4f6ce23db22a21\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "6e611f2b8655684f578cb975fa0ebfd031b45d69", "tree": "bedd55a6c81bac7c48bc0bd437a0b16d1671fa96", "parents": [ "a54734678ff9cb97938b9f7648547174f3b118e4" ], "author": { "name": "Sujit Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Fri Mar 30 11:41:49 2012 +0530" }, "committer": { "name": "Sujit Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Fri Mar 30 11:50:50 2012 +0530" }, "message": "Revert \"mmc: sdio: optimized SDIO IRQ handling for single irq\"\n\nThis reverts commit 06e8935febe687e2a561707d4c7ca4245d261dbe.\nWith the optimization, the sdio_irq_thread() sends a spurious\ninterrupt notification to the registered function handler during\nksdioirq thread start up. The function handler may or may not\nhandle this interrupt gracefully. The correct way to inform\nabout interrupt is to check CCCR_INTx register for pending\ninterrupts before calling function driver\u0027s irq handler\nwhich is broken with this optimization, hence the revert.\n\nCRs-Fixed: 345547\nChange-Id: Ia1525ef439c8d0d36b796f393066065648356635\nSigned-off-by: Sujit Reddy Thumma \u003csthumma@codeaurora.org\u003e\n" }, { "commit": "0664b9877f2f6867585c108988ff70e647ac2acd", "tree": "c1077659b998179800e1e3e1dc3384932796edd5", "parents": [ "51dac98e2868508d38bafffe023c1290de57c699", "eb90c92bb7a17b4e78b9815797fa46e1851432dc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Mar 29 22:23:31 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Mar 29 22:23:31 2012 -0700" }, "message": "Merge \"hwmon: epm: Add file interface support\" into msm-3.0" }, { "commit": "77a8d62f49ff4904d8e0948307f035b039c1b855", "tree": "816438a1061df01738c8b4f722d003fb8933b775", "parents": [ "c6d372b4c74c5cdce27fb20d8177b357f0b793ab", "6bc448aefa897a1e08a6c817280809afc189faa7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Mar 29 18:18:41 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Mar 29 18:18:42 2012 -0700" }, "message": "Merge changes Ia5afcf33,Ibd380f8e,Icec5b28f into msm-3.0\n\n* changes:\n msm_fb: display: Add IOMMU support to MDP and rotator driver\n msm_fb: display: Wait for external vsync before turning off DTV\n msm_fb: display: Enable timing generator during first update\n" }, { "commit": "c6d372b4c74c5cdce27fb20d8177b357f0b793ab", "tree": "f48ff57667ce58089ee0648f9cf862b1fd8c2734", "parents": [ "880a92263446d5292b665e30c201e11bd6681ab7", "d4e3d523925a6b0b31d96b78a052702c70c68135" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Mar 29 18:18:42 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Mar 29 18:18:42 2012 -0700" }, "message": "Merge changes I16f522e7,Ifa5b3bc2 into msm-3.0\n\n* changes:\n Merge branch \u0027google-android\u0027 into msm-3.0\n locking, kprobes: Annotate the hash locks and kretprobe.lock as raw\n" }, { "commit": "2e5bbd87af6e20b39c09da6f8bb94d7f6f7d5105", "tree": "a0dd15c41ebc8519f802ffac9c79de145c8c9669", "parents": [ "3eff85619c3bdf125aa22c3e54accf39ef946345", "74730c7d870da7be00b94e17f3b46a538005c078" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Mar 29 14:17:01 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Mar 29 14:17:01 2012 -0700" }, "message": "Merge changes I3984d747,I9a436f63 into msm-3.0\n\n* changes:\n msm: board-8930-pmic: Add default configuration for LED anode power source\n power: pm8921-charger: Add feature to use charger LED\n" }, { "commit": "3321da6833f59cc64908131b15127585bb0cc015", "tree": "eb707f89ecedb22a662802f405bf9970b5c0438d", "parents": [ "470fbb0abdfc7abdc0726ce2bc6f930ba9024b0a", "28f49c84acb4e691b630b26c37ab6d206109482f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Mar 29 14:17:01 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Mar 29 14:17:01 2012 -0700" }, "message": "Merge changes I2cabb2d6,Idffba143 into msm-3.0\n\n* changes:\n ASoC: msm8960: properly protect external mclk control function\n ASoC: wcd9310: Add plug detection through mechanical switch\n" }, { "commit": "6bc448aefa897a1e08a6c817280809afc189faa7", "tree": "da22fc9b63ab4915b44e43a681451126914533ca", "parents": [ "87260cdaef95054474e97fab85e3fb691f03a035" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Wed Mar 14 11:31:52 2012 -0700" }, "committer": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Thu Mar 29 10:13:06 2012 -0700" }, "message": "msm_fb: display: Add IOMMU support to MDP and rotator driver\n\nAdd IOMMU support to MDP and rotator driver for operating with\nvirtual addresses instead of physical addresses\n\nChange-Id: Ia5afcf33220e0e75e92948649c2bd4d7ef32917d\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\n" }, { "commit": "eb90c92bb7a17b4e78b9815797fa46e1851432dc", "tree": "fd76d0adaf810c4cf94d9efeea3cb0ea50dc216f", "parents": [ "62ed9ac5c02f94c8ae007f19248ca9b130eadee4" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Tue Mar 27 22:58:06 2012 -0700" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Wed Mar 28 19:25:26 2012 -0700" }, "message": "hwmon: epm: Add file interface support\n\nAdd IOCTL to initialize the I2C expander and SPI\ninitialization for ADS ADC. Clients issue a request\nto initialize and enable the device before issuing\nrequests to perform an ADC read.\n\nThe file interface is necessary since it takes\nconsiderable amount of time to initialize the\nI2C expander and the ADS ADC device for every\nADC read transaction.\n\nChange-Id: I9e830232592288cbc41554070c70882f05c842ce\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "d4e3d523925a6b0b31d96b78a052702c70c68135", "tree": "57a24f74de3a76fed38a56f66c48748c8e3c0199", "parents": [ "1942f21b1d31ef46ecaad76f963f2b889537ab12", "5ded52c2167dd3664cda89ebcd4e9aaaa37dd03a" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Wed Mar 28 16:03:47 2012 -0700" }, "committer": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Wed Mar 28 16:03:47 2012 -0700" }, "message": "Merge branch \u0027google-android\u0027 into msm-3.0\n\nMerge Google\u0027s Android tree into msm-3.0\nThis consists of the following conflicts and 42 commits:\n\nConflicts:\n\tdrivers/mmc/core/bus.c\n\tdrivers/rtc/class.c\n\tdrivers/usb/gadget/android.c\n\nMost of the conflicts stem from the changes made to the\nlocal msm-3.0 branch.\n\ncommit 1f8c5cecfe44994cd617ba2803f41fb56d53e91c\nAuthor: Heiko Stuebner \u003cheiko@sntech.de\u003e\nDate: Wed Feb 1 10:33:01 2012 -0800\n\n Input: evdev - fix variable initialisation\n\n Commit 509f87c5f564 (evdev - do not block waiting for an event if\n fd\n is nonblock) created a code path were it was possible to use retval\n uninitialized.\n\n This could lead to the xorg evdev input driver getting corrupt data\n and refusing to work with log messages like\n \tAUO-Pixcir touchscreen: Read error: Success\n \tsg060_keys: Read error: Success\n \tAUO-Pixcir touchscreen: Read error: Success\n \tsg060_keys: Read error: Success\n (for drivers auo-pixcir-ts and gpio-keys).\n\n Signed-off-by: Heiko Stuebner \u003cheiko@sntech.de\u003e\n\n drivers/input/evdev.c | 2 +-\n 1 files changed, 1 insertions(+), 1 deletions(-)\n\ncommit 4dc43d7079bdae572212368e1d29abea0177c932\nAuthor: Arve Hjønnevåg \u003carve@android.com\u003e\nDate: Fri Oct 17 15:20:55 2008 -0700\n\n Input: evdev - Add ioctl to block suspend while event queue is not empty.\n\n Add an ioctl, EVIOCSSUSPENDBLOCK, to enable a wakelock that will block\n suspend while the event queue is not empty. This allows userspace code to\n process input events while the device appears to be asleep.\n\n The current code holds the wakelock for up 5 seconds for every input\n device and client. This can prevent suspend if sensor with a high data\n rate is active, even when that sensor is not capable of waking the\n device once it is suspended.\n\n Change-Id: I624d66ef30a0b3abb543685c343382b8419b42b9\n Signed-off-by: Arve Hjønnevåg \u003carve@android.com\u003e\n\n drivers/input/evdev.c | 53 +++++++++++++++++++++++++++++++++++++++++++-----\n include/linux/input.h | 3 ++\n 2 files changed, 50 insertions(+), 6 deletions(-)\n\ncommit 7cc846069a8a9116d8c81526c459070eed0e3477\nAuthor: Arve Hjønnevåg \u003carve@android.com\u003e\nDate: Mon Jan 23 17:15:45 2012 -0800\n\n Input: evdev - Don\u0027t hold wakelock when no data is available to user-space\n\n If there is no SYN_REPORT event in the buffer the buffer data is invisible\n to user-space. The wakelock should not be held in this case.\n\n Change-Id: Idae890ff0da8eb46a2cfce61a95b3a97252551ad\n Signed-off-by: Arve Hjønnevåg \u003carve@android.com\u003e\n\n drivers/input/evdev.c | 5 +++--\n 1 files changed, 3 insertions(+), 2 deletions(-)\n\ncommit 0e80804a2e8134e31d4d32679bdfff070fc64bca\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Tue Jan 31 11:06:23 2012 -0800\n\n net: wireless: bcmdhd: Increase pm_notify callback priority\n\n Make pm_notify callback to be called the first on suspend/resume path to\n ensure it will always be called.\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n drivers/net/wireless/bcmdhd/dhd_linux.c | 2 +-\n 1 files changed, 1 insertions(+), 1 deletions(-)\n\ncommit dfc896e1c833916ef5062294e2d675d66294ac68\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Mon Jan 30 15:43:31 2012 -0800\n\n net: wireless: bcmdhd: Fix crash on dhdsdio_probe_attach() failure\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n drivers/net/wireless/bcmdhd/dhd_linux.c | 17 ++++++++++++++---\n drivers/net/wireless/bcmdhd/dhd_sdio.c | 8 +++++++-\n 2 files changed, 21 insertions(+), 4 deletions(-)\n\ncommit 256a6b23be368f708672eb5929e961afc872f610\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Mon Jan 30 13:03:19 2012 -0800\n\n net: wireless: bcmdhd: Daemonize wl_event_handler\n\n Daemonizing makes thread (besides other things) NON-FREEZABLE, and it will not\n get fake signal on suspend to quicl down_interruptible()\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n drivers/net/wireless/bcmdhd/dhd_linux.c | 13 -------------\n drivers/net/wireless/bcmdhd/include/linuxver.h | 12 ++++++++++++\n drivers/net/wireless/bcmdhd/wl_cfg80211.c | 3 +++\n 3 files changed, 15 insertions(+), 13 deletions(-)\n\ncommit ff93146589f6f28ba8a46f85e9b319bbd2cc8cfd\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Tue Jan 24 13:59:40 2012 -0800\n\n net: wireless: bcmdhd: Update to Version 5.90.195.23\n\n - WFD fixes\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n drivers/net/wireless/bcmdhd/dhd_cfg80211.c | 269 -------------------------\n drivers/net/wireless/bcmdhd/dhd_linux.c | 2 +-\n drivers/net/wireless/bcmdhd/dhd_sdio.c | 8 +-\n drivers/net/wireless/bcmdhd/include/epivers.h | 8 +-\n drivers/net/wireless/bcmdhd/siutils.c | 5 +\n drivers/net/wireless/bcmdhd/wl_cfg80211.c | 223 +++++++++++++++------\n drivers/net/wireless/bcmdhd/wl_cfgp2p.c | 175 ++++++++++++++++-\n drivers/net/wireless/bcmdhd/wl_cfgp2p.h | 37 ++--\n 8 files changed, 368 insertions(+), 359 deletions(-)\n\ncommit 96034c20069fe841f4be741755f94671a328702e\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Tue Jan 24 13:55:00 2012 -0800\n\n net: wireless: bcmdhd: Update to Version 5.90.195.22\n\n - Disable Ad-hoc support for cfg80211\n - dhd_linux.c: Fix incorrect pid check\n - Merge Android changes from Android tree\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n drivers/net/wireless/bcmdhd/bcmsdh_linux.c | 24 ++------------------\n drivers/net/wireless/bcmdhd/bcmsdh_sdmmc_linux.c | 25 +++++++++++++++------\n drivers/net/wireless/bcmdhd/dhd_linux.c | 10 ++++----\n drivers/net/wireless/bcmdhd/dhd_sdio.c | 11 +++++++--\n drivers/net/wireless/bcmdhd/hndpmu.c | 16 ++++++++++++++\n drivers/net/wireless/bcmdhd/include/bcmdevs.h | 2 +\n drivers/net/wireless/bcmdhd/include/epivers.h | 8 +++---\n drivers/net/wireless/bcmdhd/siutils.c | 3 ++\n drivers/net/wireless/bcmdhd/wl_cfg80211.c | 11 ++++++++-\n 9 files changed, 68 insertions(+), 42 deletions(-)\n\ncommit 494661a1acbd4767e4d7daaff8d7ce55328913d9\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Tue Jan 24 13:47:47 2012 -0800\n\n net: wireless: bcmdhd: Update to Version 5.90.195.19\n\n - Add WFD changes\n - Add extra locking for internal ioctl operations\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n drivers/net/wireless/bcmdhd/Makefile | 4 +-\n drivers/net/wireless/bcmdhd/bcmsdh_linux.c | 25 +-\n drivers/net/wireless/bcmdhd/bcmsdh_sdmmc.c | 4 +-\n drivers/net/wireless/bcmdhd/dhd.h | 10 +-\n drivers/net/wireless/bcmdhd/dhd_cdc.c | 7 +-\n drivers/net/wireless/bcmdhd/dhd_cfg80211.c | 862 ++++++++\n drivers/net/wireless/bcmdhd/dhd_cfg80211.h | 42 +\n drivers/net/wireless/bcmdhd/dhd_common.c | 7 +-\n drivers/net/wireless/bcmdhd/dhd_linux.c | 103 +-\n drivers/net/wireless/bcmdhd/dhd_linux_mon.c | 409 ----\n drivers/net/wireless/bcmdhd/dhd_sdio.c | 4 +-\n drivers/net/wireless/bcmdhd/include/dhdioctl.h | 3 +-\n drivers/net/wireless/bcmdhd/include/epivers.h | 8 +-\n drivers/net/wireless/bcmdhd/include/proto/802.11.h | 12 +-\n drivers/net/wireless/bcmdhd/include/wlioctl.h | 19 +-\n drivers/net/wireless/bcmdhd/wl_android.c | 22 +-\n drivers/net/wireless/bcmdhd/wl_android.h | 2 +-\n drivers/net/wireless/bcmdhd/wl_cfg80211.c | 2142 ++++++--------------\n drivers/net/wireless/bcmdhd/wl_cfg80211.h | 125 +-\n drivers/net/wireless/bcmdhd/wl_cfgp2p.c | 245 ++-\n drivers/net/wireless/bcmdhd/wl_cfgp2p.h | 27 +-\n drivers/net/wireless/bcmdhd/wl_linux_mon.c | 409 ++++\n drivers/net/wireless/bcmdhd/wldev_common.c | 69 +-\n drivers/net/wireless/bcmdhd/wldev_common.h | 20 +-\n 24 files changed, 2485 insertions(+), 2095 deletions(-)\n\ncommit 1dddb0cc0de2840a2fe43a02fcb0196bb5cb86c8\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Tue Jan 24 13:37:34 2012 -0800\n\n net: wireless: bcmdhd: Update to Version 5.90.195.15\n\n - Add WFD concurrent mode support\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n drivers/net/wireless/bcmdhd/bcmevent.c | 8 +-\n drivers/net/wireless/bcmdhd/bcmsdh_sdmmc_linux.c | 12 +-\n drivers/net/wireless/bcmdhd/bcmutils.c | 4 +-\n drivers/net/wireless/bcmdhd/dhd.h | 25 +-\n drivers/net/wireless/bcmdhd/dhd_cdc.c | 9 +-\n drivers/net/wireless/bcmdhd/dhd_common.c | 4 +-\n drivers/net/wireless/bcmdhd/dhd_linux.c | 148 +++--\n drivers/net/wireless/bcmdhd/dhd_linux_mon.c | 28 +-\n drivers/net/wireless/bcmdhd/dhd_sdio.c | 27 +-\n drivers/net/wireless/bcmdhd/dhd_wlfc.h | 12 +-\n drivers/net/wireless/bcmdhd/hndpmu.c | 44 +-\n drivers/net/wireless/bcmdhd/include/Makefile | 2 +-\n drivers/net/wireless/bcmdhd/include/aidmp.h | 2 +-\n drivers/net/wireless/bcmdhd/include/bcmcdc.h | 2 +-\n drivers/net/wireless/bcmdhd/include/bcmdefs.h | 37 +-\n drivers/net/wireless/bcmdhd/include/bcmdevs.h | 573 +++++++++++++-\n drivers/net/wireless/bcmdhd/include/bcmendian.h | 2 +-\n drivers/net/wireless/bcmdhd/include/bcmpcispi.h | 2 +-\n drivers/net/wireless/bcmdhd/include/bcmperf.h | 2 +-\n drivers/net/wireless/bcmdhd/include/bcmsdbus.h | 10 +-\n drivers/net/wireless/bcmdhd/include/bcmsdh.h | 10 +-\n drivers/net/wireless/bcmdhd/include/bcmsdh_sdmmc.h | 2 +-\n drivers/net/wireless/bcmdhd/include/bcmsdpcm.h | 2 +-\n drivers/net/wireless/bcmdhd/include/bcmsdspi.h | 2 +-\n drivers/net/wireless/bcmdhd/include/bcmsdstd.h | 34 +-\n drivers/net/wireless/bcmdhd/include/bcmspi.h | 2 +-\n drivers/net/wireless/bcmdhd/include/bcmutils.h | 14 +-\n drivers/net/wireless/bcmdhd/include/bcmwifi.h | 2 +-\n drivers/net/wireless/bcmdhd/include/dhdioctl.h | 2 +-\n drivers/net/wireless/bcmdhd/include/epivers.h | 14 +-\n drivers/net/wireless/bcmdhd/include/hndpmu.h | 2 +-\n .../net/wireless/bcmdhd/include/hndrte_armtrap.h | 2 +-\n drivers/net/wireless/bcmdhd/include/hndrte_cons.h | 2 +-\n drivers/net/wireless/bcmdhd/include/hndsoc.h | 2 +-\n drivers/net/wireless/bcmdhd/include/htsf.h | 2 +-\n drivers/net/wireless/bcmdhd/include/linux_osl.h | 2 +-\n drivers/net/wireless/bcmdhd/include/linuxver.h | 6 +-\n drivers/net/wireless/bcmdhd/include/miniopt.h | 2 +-\n drivers/net/wireless/bcmdhd/include/msgtrace.h | 2 +-\n drivers/net/wireless/bcmdhd/include/osl.h | 2 +-\n .../wireless/bcmdhd/include/packed_section_end.h | 2 +-\n .../wireless/bcmdhd/include/packed_section_start.h | 2 +-\n drivers/net/wireless/bcmdhd/include/pcicfg.h | 28 +-\n drivers/net/wireless/bcmdhd/include/proto/802.11.h | 317 +++++++-\n .../net/wireless/bcmdhd/include/proto/802.11_bta.h | 2 +-\n .../net/wireless/bcmdhd/include/proto/802.11e.h | 2 +-\n drivers/net/wireless/bcmdhd/include/proto/802.1d.h | 2 +-\n drivers/net/wireless/bcmdhd/include/proto/bcmeth.h | 2 +-\n .../net/wireless/bcmdhd/include/proto/bcmevent.h | 9 +-\n drivers/net/wireless/bcmdhd/include/proto/bcmip.h | 2 +-\n .../net/wireless/bcmdhd/include/proto/bt_amp_hci.h | 2 +-\n drivers/net/wireless/bcmdhd/include/proto/eapol.h | 2 +-\n .../net/wireless/bcmdhd/include/proto/ethernet.h | 3 +-\n drivers/net/wireless/bcmdhd/include/proto/p2p.h | 2 +-\n drivers/net/wireless/bcmdhd/include/proto/sdspi.h | 2 +-\n drivers/net/wireless/bcmdhd/include/proto/vlan.h | 2 +-\n drivers/net/wireless/bcmdhd/include/proto/wpa.h | 12 +-\n drivers/net/wireless/bcmdhd/include/sbchipc.h | 168 ++++-\n drivers/net/wireless/bcmdhd/include/sbconfig.h | 2 +-\n drivers/net/wireless/bcmdhd/include/sbhnddma.h | 6 +-\n drivers/net/wireless/bcmdhd/include/sbpcmcia.h | 2 +-\n drivers/net/wireless/bcmdhd/include/sbsdio.h | 2 +-\n drivers/net/wireless/bcmdhd/include/sbsdpcmdev.h | 2 +-\n drivers/net/wireless/bcmdhd/include/sbsocram.h | 2 +-\n drivers/net/wireless/bcmdhd/include/sdio.h | 5 +-\n drivers/net/wireless/bcmdhd/include/sdioh.h | 32 +-\n drivers/net/wireless/bcmdhd/include/sdiovar.h | 2 +-\n drivers/net/wireless/bcmdhd/include/siutils.h | 30 +-\n drivers/net/wireless/bcmdhd/include/trxhdr.h | 3 +-\n drivers/net/wireless/bcmdhd/include/typedefs.h | 5 +-\n drivers/net/wireless/bcmdhd/include/wlfc_proto.h | 2 +-\n drivers/net/wireless/bcmdhd/include/wlioctl.h | 87 ++-\n drivers/net/wireless/bcmdhd/linux_osl.c | 23 +-\n drivers/net/wireless/bcmdhd/siutils.c | 195 +++++-\n drivers/net/wireless/bcmdhd/wl_android.c | 6 +-\n drivers/net/wireless/bcmdhd/wl_cfg80211.c | 875 ++++++++++++--------\n drivers/net/wireless/bcmdhd/wl_cfg80211.h | 282 +++++---\n drivers/net/wireless/bcmdhd/wl_cfgp2p.c | 165 ++++-\n drivers/net/wireless/bcmdhd/wl_cfgp2p.h | 12 +-\n drivers/net/wireless/bcmdhd/wl_iw.c | 110 +++-\n drivers/net/wireless/bcmdhd/wl_iw.h | 17 +-\n 81 files changed, 2737 insertions(+), 752 deletions(-)\n\ncommit 52bdb6f54335bce7861d756ce1eb03ea9b7adb8f\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Mon Jan 23 12:47:21 2012 -0800\n\n net: wireless: bcmdhd: Add WIPHY_FLAG_SUPPORTS_FW_ROAM flag\n\n Adding this flag will allow NL80211_ATTR_ROAM_SUPPORT, and will set\n WPA_DRIVER_FLAGS_BSS_SELECTION flag in wpa_supplicant\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n drivers/net/wireless/bcmdhd/wl_cfg80211.c | 4 +++-\n 1 files changed, 3 insertions(+), 1 deletions(-)\n\ncommit b1a94205e9ab943d4c18f8e0a081b32bc8bd1f50\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Fri Jan 20 14:15:05 2012 -0800\n\n net: wireless: bcmdhd: Fake PNO event to wake up the wpa_supplicant\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n drivers/net/wireless/bcmdhd/dhd_linux.c | 4 +++-\n drivers/net/wireless/bcmdhd/wl_cfg80211.c | 20 ++++++++++++++++----\n 2 files changed, 19 insertions(+), 5 deletions(-)\n\ncommit 09701e3edf03f92f4215aad83b32cd8cec7fb689\nAuthor: Scott Anderson \u003csaa@google.com\u003e\nDate: Wed Jan 18 15:56:51 2012 -0800\n\n usb: gadget: android: Honor CONFIG_USB_GADGET_VBUS_DRAW\n\n The maximum current draw was hard coded to 500 mA. composite.c\n has code that uses CONFIG_USB_GADGET_VBUS_DRAW to set the\n bMaxPower and to set whether or not the device is self-powered if\n they haven\u0027t been set. This change removes the code in android.c\n to allow composite.c to set them.\n\n Change-Id: I9db37922e91ee86e9e5c0e14519e119e5c41ca48\n Signed-off-by: Scott Anderson \u003csaa@google.com\u003e\n\n drivers/usb/gadget/android.c | 3 ---\n 1 files changed, 0 insertions(+), 3 deletions(-)\n\ncommit a6ccb73389f3df11e788bf84254a7b27c430f949\nAuthor: Benoit Goby \u003cbenoit@android.com\u003e\nDate: Fri Jan 20 14:42:41 2012 -0800\n\n usb: gadget: Fix usb string id allocation\n\n Don\u0027t reset next_string_id every time the gadget is enabled, this makes\n the next strings allocated overwrite strings allocated at probe time.\n Instead, fix rndis not to allocate new string ids on every config bind.\n\n Change-Id: Ied28ee416bb6f00c434c34176fe5b7f0dcb2b2d4\n Signed-off-by: Benoit Goby \u003cbenoit@android.com\u003e\n\n drivers/usb/gadget/android.c | 1 -\n drivers/usb/gadget/f_rndis.c | 12 +++++-------\n drivers/usb/gadget/rndis.c | 11 +++++++++++\n 3 files changed, 16 insertions(+), 8 deletions(-)\n\ncommit 87159de9c30dab02b84cbaffa7498140d4ebc1a1\nAuthor: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nDate: Thu Aug 11 11:46:22 2011 +0300\n\n nl80211/cfg80211: Make addition of new sinfo fields safer\n\n Add a comment pointing out the use of enum station_info_flags for\n all new struct station_info fields. In addition, memset the sinfo\n buffer to zero before use on all paths in the current tree to avoid\n leaving uninitialized pointers in the data.\n\n Signed-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\n Signed-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n include/net/cfg80211.h | 5 +++++\n net/mac80211/sta_info.c | 1 +\n net/wireless/nl80211.c | 1 +\n 3 files changed, 7 insertions(+), 0 deletions(-)\n\ncommit d692df224b8605095cb7f770c1c99d3150834daf\nAuthor: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nDate: Mon Aug 8 12:11:52 2011 +0300\n\n cfg80211/nl80211: Send AssocReq IEs to user space in AP mode\n\n When user space SME/MLME (e.g., hostapd) is not used in AP mode, the\n IEs from the (Re)Association Request frame that was processed in\n firmware need to be made available for user space (e.g., RSN IE for\n hostapd). Allow this to be done with cfg80211_new_sta().\n\n Signed-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\n Acked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\n Signed-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n include/net/cfg80211.h | 8 ++++++++\n net/wireless/nl80211.c | 4 ++++\n 2 files changed, 12 insertions(+), 0 deletions(-)\n\ncommit d1e94136fc4fe8ea608f4e9d21befa00c86e1e29\nAuthor: Dima Zavin \u003cdima@android.com\u003e\nDate: Mon Jan 23 10:39:02 2012 -0800\n\n misc: remove android pmem driver, it\u0027s obsolete.\n\n Change-Id: I48d9778007e1e9eed2bb34e33ceee818c23afaa5\n Signed-off-by: Dima Zavin \u003cdima@android.com\u003e\n\n drivers/misc/Kconfig | 4 -\n drivers/misc/Makefile | 1 -\n drivers/misc/pmem.c | 1345 ------------------------------------------\n include/linux/android_pmem.h | 93 ---\n 4 files changed, 0 insertions(+), 1443 deletions(-)\n\ncommit dac306d896642f3dfcd878ab6a0a5b8c123722f3\nAuthor: Dima Zavin \u003cdima@android.com\u003e\nDate: Thu Jan 19 09:51:07 2012 -0800\n\n Revert \"proc: enable writing to /proc/pid/mem\"\n\n This reverts commit 198214a7ee50375fa71a65e518341980cfd4b2f0.\n\n fs/proc/base.c | 5 +++++\n 1 files changed, 5 insertions(+), 0 deletions(-)\n\ncommit a65e28a0149261776678977962cfa0f90973e1d4\nAuthor: Dima Zavin \u003cdima@android.com\u003e\nDate: Thu Jan 12 15:55:25 2012 -0800\n\n ram_console: set CON_ANYTIME console flag\n\n We want to ensure that we get all the console messages, even ones\n that occur while the printing CPU is not yet online.\n\n Change-Id: I1d2694d05ac9415669a92f38efdd8e71c927705b\n Signed-off-by: Dima Zavin \u003cdima@android.com\u003e\n\n drivers/staging/android/ram_console.c | 2 +-\n 1 files changed, 1 insertions(+), 1 deletions(-)\n\ncommit f16e6fb3e3bbbc279579b3c3def7951787c88a0a\nAuthor: Benoit Goby \u003cbenoit@android.com\u003e\nDate: Thu Dec 15 18:40:37 2011 -0800\n\n Revert \"usb: gadget: rndis: don\u0027t use dev_get_stats\"\n\n This reverts commit ffdab0c0c40bab6de78b1952bb07aed221994b73.\n\n Not needed anymore in 2.6.39 and 3.0, dev_get_stats has been fixed\n and may be called from atomic context. See:\n 1ac9ad1 net: remove dev_txq_stats_fold()\n\n drivers/usb/gadget/rndis.c | 23 ++---------------------\n 1 files changed, 2 insertions(+), 21 deletions(-)\n\ncommit e1493f1544e804f228efd4a48a843bb1d81d2d2c\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Mon Dec 19 10:24:09 2011 -0800\n\n net: wireless: bcmdhd: Enable wlan access on resume for all sdio functions\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n drivers/net/wireless/bcmdhd/bcmsdh_sdmmc_linux.c | 4 +---\n 1 files changed, 1 insertions(+), 3 deletions(-)\n\ncommit bbd08c6e95880dfc3bf1fe9b07486beb33a9cdd1\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Fri Dec 16 12:54:51 2011 -0800\n\n net: wireless: bcmdhd: Fix P2P interface removal\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n drivers/net/wireless/bcmdhd/dhd_linux.c | 3 ++\n drivers/net/wireless/bcmdhd/wl_cfg80211.c | 43 ++++++++++++++++++++++-------\n drivers/net/wireless/bcmdhd/wl_cfg80211.h | 9 ++++--\n 3 files changed, 42 insertions(+), 13 deletions(-)\n\ncommit 37ff4411a5f5ce21feb3825296308f2a767e3662\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Thu Dec 15 12:12:20 2011 -0800\n\n net: wireless: bcm4329: Fix pno_enable if disassociated\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n drivers/net/wireless/bcm4329/dhd_common.c | 43 ++++++++++++++++++++++++-----\n 1 files changed, 36 insertions(+), 7 deletions(-)\n\ncommit 599c8566fa1f34f297df6c683c23a213ff748d02\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Tue Dec 13 17:39:48 2011 -0800\n\n net: wireless: bcmdhd: Fix proper scan command even if request is NULL\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n drivers/net/wireless/bcmdhd/wl_cfg80211.c | 16 ++++++++++------\n 1 files changed, 10 insertions(+), 6 deletions(-)\n\ncommit f227b88c89e84371e3897207ddab3877f6af6113\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Tue Dec 13 12:27:49 2011 -0800\n\n net: wireless: bcmdhd: Decrease event wake_lock timeout to 1500 ms\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n drivers/net/wireless/bcmdhd/dhd.h | 4 ++--\n drivers/net/wireless/bcmdhd/dhd_linux.c | 8 ++++----\n drivers/net/wireless/bcmdhd/wl_iw.c | 2 +-\n 3 files changed, 7 insertions(+), 7 deletions(-)\n\ncommit ed3f35608786481035165a3b0321ab0b04768b5d\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Mon Dec 12 15:40:33 2011 -0800\n\n net: wireless: bcmdhd: Fix getting arp_hostip table\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n drivers/net/wireless/bcmdhd/dhd_common.c | 2 +-\n 1 files changed, 1 insertions(+), 1 deletions(-)\n\ncommit c561cedf2b6c9d6e7c26ee69dd17c97c0a852a17\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Tue Dec 6 16:27:37 2011 -0800\n\n net: wireless: bcmdhd: Allow to push more packets to FW for Tx\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n drivers/net/wireless/bcmdhd/dhd_sdio.c | 2 +-\n 1 files changed, 1 insertions(+), 1 deletions(-)\n\ncommit 4f36cb88d6e7e5afcdef42f6d2d70cbffbd2c541\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Fri Dec 2 13:24:01 2011 -0800\n\n net: wireless: bcmdhd: Fix scan crash in ibss mode\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n drivers/net/wireless/bcmdhd/wl_cfg80211.c | 2 +-\n 1 files changed, 1 insertions(+), 1 deletions(-)\n\ncommit af16732d4c98078988755337fb5e197fc31ca77e\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Fri Dec 2 13:10:47 2011 -0800\n\n net: wireless: bcmdhd: Add FW reloading in case of FW hang\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n drivers/net/wireless/bcmdhd/dhd_linux.c | 5 ++++-\n 1 files changed, 4 insertions(+), 1 deletions(-)\n\ncommit 7caeacd6ed135e2ee4fbbc26aa0fc0aea4cb166d\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Wed Nov 30 12:49:02 2011 -0800\n\n net: wireless: bcmdhd: Update to Version 5.90.125.94.1\n\n - Return zeroed private command buffer\n - Fix memory leak in wl_inform_single_bss()\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n drivers/net/wireless/bcmdhd/dhd_common.c | 5 +++--\n drivers/net/wireless/bcmdhd/dhd_linux_mon.c | 10 ++++++----\n drivers/net/wireless/bcmdhd/include/epivers.h | 2 +-\n drivers/net/wireless/bcmdhd/wl_android.c | 9 ++++++---\n drivers/net/wireless/bcmdhd/wl_cfg80211.c | 9 ++++++---\n 5 files changed, 22 insertions(+), 13 deletions(-)\n\ncommit 8d71d882e7062dfbcdb2f790470f803cc536b8ae\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Fri Nov 11 16:04:12 2011 -0800\n\n net: wireless: bcmdhd: Use CONFIG_DHD_USE_STATIC_BUF for preallocated memory\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n drivers/net/wireless/bcmdhd/Kconfig | 7 +++\n drivers/net/wireless/bcmdhd/bcmsdh_sdmmc.c | 16 ++++----\n drivers/net/wireless/bcmdhd/dhd.h | 4 +-\n drivers/net/wireless/bcmdhd/dhd_cdc.c | 4 +-\n drivers/net/wireless/bcmdhd/dhd_linux.c | 4 +-\n drivers/net/wireless/bcmdhd/dhd_sdio.c | 4 +-\n drivers/net/wireless/bcmdhd/include/linux_osl.h | 2 +-\n drivers/net/wireless/bcmdhd/linux_osl.c | 52 +++++++++++++----------\n drivers/net/wireless/bcmdhd/wl_android.c | 7 ++-\n 9 files changed, 57 insertions(+), 43 deletions(-)\n\ncommit 35047200c401cdd1bb43b5574270d1ac86a47937\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Mon Dec 19 12:32:21 2011 -0800\n\n wireless: Protect regdomain change by mutex\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n net/wireless/reg.c | 5 ++++-\n 1 files changed, 4 insertions(+), 1 deletions(-)\n\ncommit ea693bf7f87603b072f4ceea6684221fa0b8e863\nAuthor: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\nDate: Fri Dec 16 17:52:18 2011 -0800\n\n mmc: Set suspend/resume bus operations if CONFIG_PM_RUNTIME is used\n\n Signed-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n\n drivers/mmc/core/bus.c | 24 +++++++-----------------\n 1 files changed, 7 insertions(+), 17 deletions(-)\n\ncommit dc1b6340394ef744e210247ab786df66639f5a33\nAuthor: Benoit Goby \u003cbenoit@android.com\u003e\nDate: Fri Dec 9 18:05:00 2011 -0800\n\n usb: gadget: android: Don\u0027t allow changing the functions list if enabled\n\n Change-Id: I3ad39b420ce79a8602a7eca1daac1f56b30bad5c\n Signed-off-by: Benoit Goby \u003cbenoit@android.com\u003e\n\n drivers/usb/gadget/android.c | 28 ++++++++++++++++++++++++----\n 1 files changed, 24 insertions(+), 4 deletions(-)\n\ncommit e0de0a507d83e84c833d01de9e46a44b12419431\nAuthor: Benoit Goby \u003cbenoit@android.com\u003e\nDate: Tue Nov 29 13:49:27 2011 -0800\n\n usb: gadget: android: Cancel pending ctrlrequest before disabling\n\n Make sure there is no pending ctrlrequest before removing the config.\n Otherwise the ctrlrequest complete callback could access structures\n after they have been freed. Unbind cancels pending transfers but not\n ep0 requests.\n\n Bug: 5513065 5440193\n\n Change-Id: I063c22bf5d104a3d2df71cf622409459fac5f27a\n Signed-off-by: Benoit Goby \u003cbenoit@android.com\u003e\n\n drivers/usb/gadget/android.c | 2 ++\n 1 files changed, 2 insertions(+), 0 deletions(-)\n\ncommit b86fd0b62252fbba6a5d6acda09fd325fb8e201b\nAuthor: Colin Cross \u003cccross@android.com\u003e\nDate: Tue Nov 29 16:37:07 2011 -0800\n\n ARM: idle: call idle notifiers before stopping nohz tick\n\n If an idle notifier modifies a timer, calling the notifier after\n the sched tick has been stopped may leave the sched tick set too\n early. Move teh idle notifier call before the call to\n tick_nohz_stop_sched_tick.\n\n Change-Id: I0db3284bec6d0193bc5e2a57650ab06bd8342319\n Signed-off-by: Colin Cross \u003cccross@android.com\u003e\n\n arch/arm/kernel/process.c | 2 +-\n 1 files changed, 1 insertions(+), 1 deletions(-)\n\ncommit 6a4a38525d60db7e915d559273d8c89db5a98edf\nAuthor: Benoit Goby \u003cbenoit@android.com\u003e\nDate: Mon Nov 28 18:01:03 2011 -0800\n\n usb: gadget: android: Reset next_string_id before enable\n\n Reset next_string_id to 0 before enabling the gadget driver. Otherwise,\n after a large number of enable/disable cycles, bind will fail\n because we cannot allocate new string ids. String ids cannot be larger\n than 254 per USB spec.\n\n Change-Id: I44f5fece45008b7a0a18c025d4eb5ce842585c28\n Signed-off-by: Benoit Goby \u003cbenoit@android.com\u003e\n\n drivers/usb/gadget/android.c | 1 +\n 1 files changed, 1 insertions(+), 0 deletions(-)\n\ncommit dbb18fb2c1519b7810018580ee5123f9be73f213\nAuthor: hyungseoung.yoo \u003chyungseoung.yoo@samsung.com\u003e\nDate: Fri Nov 18 13:57:01 2011 +0900\n\n Bluetooth: Keep master role when SCO or eSCO is active\n\n This improves compatbility with a lot of headset / chipset\n combinations. Ideally this should not be needed.\n\n Change-Id: I8b676701e12e416aa7d60801b9d353b15d102709\n Signed-off-by: hyungseoung.yoo \u003chyungseoung.yoo@samsung.com\u003e\n Signed-off-by: Jaikumar Ganesh \u003cjaikumarg@android.com\u003e\n\n net/bluetooth/hci_event.c | 12 +++++++++++-\n 1 files changed, 11 insertions(+), 1 deletions(-)\n\ncommit 9d187300dfeb825b3c851458427a7046d9302c06\nAuthor: Arve Hjønnevåg \u003carve@android.com\u003e\nDate: Tue Nov 22 14:56:50 2011 -0800\n\n rtc: Fix some bugs that allowed accumulating time drift in suspend/resume\n\n The current code checks if abs(delta_delta.tv_sec) is greater or\n equal to two before it discards the old delta value, but this can\n trigger at close to -1 seconds since -1.000000001 seconds is stored\n as tv_sec -2 and tv_nsec 999999999 in a normalized timespec.\n\n rtc_resume had an early return check if the rtc value had not changed\n since rtc_suspend. This effectivly stops time for the duration of the\n short sleep. Check if sleep_time is positive after all the adjustments\n have been applied instead since this allows the old_system adjustment\n in rtc_suspend to have an effect even for short sleep cycles.\n\n Change-Id: I00b45c0349ec91a4bab9b41a126b377515427898\n Signed-off-by: Arve Hjønnevåg \u003carve@android.com\u003e\n\n drivers/rtc/class.c | 10 +++++-----\n 1 files changed, 5 insertions(+), 5 deletions(-)\n\ncommit 452d440ab295475afb04dee90879f5fb70254659\nAuthor: Arve Hjønnevåg \u003carve@android.com\u003e\nDate: Tue Nov 22 15:28:27 2011 -0800\n\n Fix \"time: Catch invalid timespec sleep values in __timekeeping_inject_sleeptime\" to compile on 3.0\n\n Change-Id: I1225f279cda04dedbfb7f853f6b58f1032bd6d2b\n\n kernel/time/timekeeping.c | 2 +-\n 1 files changed, 1 insertions(+), 1 deletions(-)\n\ncommit cf70c6a40073530c9e23fb373a541c09996429c7\nAuthor: John Stultz \u003cjohn.stultz@linaro.org\u003e\nDate: Wed Jun 1 18:18:09 2011 -0700\n\n time: Catch invalid timespec sleep values in __timekeeping_inject_sleeptime\n\n Arve suggested making sure we catch possible negative sleep time\n intervals that could be passed into timekeeping_inject_sleeptime.\n\n CC: Arve Hjønnevåg \u003carve@android.com\u003e\n CC: Thomas Gleixner \u003ctglx@linutronix.de\u003e\n Signed-off-by: John Stultz \u003cjohn.stultz@linaro.org\u003e\n\n kernel/time/timekeeping.c | 6 ++++++\n 1 files changed, 6 insertions(+), 0 deletions(-)\n\ncommit 340ede367101d47c8fd69e83e5e6db9077f4caad\nAuthor: John Stultz \u003cjohn.stultz@linaro.org\u003e\nDate: Fri May 27 11:33:18 2011 -0700\n\n rtc: Avoid accumulating time drift in suspend/resume\n\n Because the RTC interface is only a second granular interface,\n each time we read from the RTC for suspend/resume, we introduce a\n half second (on average) of error.\n\n In order to avoid this error accumulating as the system is suspended\n over and over, this patch measures the time delta between the RTC\n and the system CLOCK_REALTIME.\n\n If the delta is less then 2 seconds from the last suspend, we compensate\n by using the previous time delta (keeping it close). If it is larger\n then 2 seconds, we assume the clock was set or has been changed, so we\n do no correction and update the delta.\n\n Note: If NTP is running, ths could seem to \"fight\" with the NTP corrected\n time, where as if the system time was off by 1 second, and NTP slewed the\n value in, a suspend/resume cycle could undo this correction, by trying to\n restore the previous offset from the RTC. However, without this patch,\n since each read could cause almost a full second worth of error, its\n possible to get almost 2 seconds of error just from the suspend/resume\n cycle alone, so this about equal to any offset added by the compensation.\n\n Further on systems that suspend/resume frequently, this should keep time\n closer then NTP could compensate for if the errors were allowed to\n accumulate.\n\n Credits to Arve Hjønnevåg for suggesting this solution.\n\n This patch also improves some of the variable names and adds more clear\n comments.\n\n CC: Arve Hjønnevåg \u003carve@android.com\u003e\n CC: Thomas Gleixner \u003ctglx@linutronix.de\u003e\n Signed-off-by: John Stultz \u003cjohn.stultz@linaro.org\u003e\n\n drivers/rtc/class.c | 65 +++++++++++++++++++++++++++++++++++++-------------\n 1 files changed, 48 insertions(+), 17 deletions(-)\n\nChange-Id: I16f522e7ee2b301cbdaea62d52d50d7249f565c2\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "1942f21b1d31ef46ecaad76f963f2b889537ab12", "tree": "9d9b10a94bb8721d10c7114a61b8eacef4afea71", "parents": [ "62ed9ac5c02f94c8ae007f19248ca9b130eadee4" ], "author": { "name": "Thomas Gleixner", "email": "tglx@linutronix.de", "time": "Sat Jul 25 16:09:17 2009 +0200" }, "committer": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Wed Mar 28 15:11:58 2012 -0700" }, "message": "locking, kprobes: Annotate the hash locks and kretprobe.lock as raw\n\nThe kprobe locks can be taken in atomic context and therefore\ncannot be preempted on -rt - annotate it.\n\nIn mainline this change documents the low level nature of\nthe lock - otherwise there\u0027s no functional difference. Lockdep\nand Sparse checking will work as usual.\n\nChange-Id: Ifa5b3bc25f2b3b9a7d0474cb7834e8a91fba518e\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "1de2dfd13d4a4262af6bb6529e3ad88a3e6b4eb4", "tree": "47e7a03fba61fff4e4869a3df97e50f0f46c5507", "parents": [ "62ed9ac5c02f94c8ae007f19248ca9b130eadee4" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Sun Mar 25 11:15:41 2012 +0530" }, "committer": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Thu Mar 29 00:15:42 2012 +0530" }, "message": "mmc: core: capture performance numbers only when asked\n\nCurrently performance numbers are captured for each SDCC\ntransfers unconditionally which may add the overhead and\ncould reduce the SDCC read/write throughput numbers.\n\nThis change adds additional control for enabling/disabling the\ncapturing of performance numbers at runtime. We already have sysfs\nentry named \"perf\" for msm sdcc devices. Currently setting this\nentry to 0 clears the performance statistics. But now we are\nchanging the definition of this entry as mentioned below:\n\nDisable performance capturing and clear the performance statistics:\n\t\"echo 0 \u003e /sys/devices/platform/msm_sdcc.\u003cn\u003e/perf\"\n\nEnable performance capturing:\n\t\"echo 1 \u003e /sys/devices/platform/msm_sdcc.\u003cn\u003e/perf\"\n\nCRs-fixed: 345170\nChange-Id: I3ab9288fd87cc8a8ada6c0c3d066cac4f68d79b7\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "949ebbe52c5e0dad01460b42a478c58fb40396a5", "tree": "7e0d4c593efa1f26917315edd4f79a389701e70d", "parents": [ "11eafc62cd500dcb770d075bc63a9e2f3a9fa692" ], "author": { "name": "Rajendra Nayak", "email": "rnayak@ti.com", "time": "Fri Nov 18 16:47:20 2011 +0530" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Wed Mar 28 10:39:59 2012 -0700" }, "message": "regulator: map consumer regulator based on device tree\n\nDevice nodes in DT can associate themselves with one or more\nregulators/supply by providing a list of phandles (to regulator nodes)\nand corresponding supply names.\n\nFor Example:\n\tdevicenode: node@0x0 {\n\t\t...\n\t\t...\n\t\tvmmc-supply \u003d \u003c\u0026regulator1\u003e;\n\t\tvpll-supply \u003d \u003c\u0026regulator2\u003e;\n\t};\n\nThe driver would then do a regulator_get(dev, \"vmmc\"); to get\nregulator1 and do a regulator_get(dev, \"vpll\"); to get\nregulator2.\n\nof_get_regulator() extracts the regulator node for a given\ndevice, based on the supply name.\n\nUse it to look up the regulator for a given consumer from device tree, during\na regulator_get(). If not found fallback and lookup through\nthe regulator_map_list instead.\n\nAlso, since the regulator dt nodes can use the same binding to\nassociate with a parent regulator/supply, allow the drivers to\nspecify a supply_name, which can then be used to lookup dt\nto find the parent phandle.\n\nChange-Id: I124a4ba1a64c1145bdd016d91b9814c29eefeb36\nSigned-off-by: Rajendra Nayak \u003crnayak@ti.com\u003e\nAcked-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n[mbohan: resolve conflict in drivers/regulator/core.c]\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "11eafc62cd500dcb770d075bc63a9e2f3a9fa692", "tree": "8b11c3e7b49ccc97afd24f1f251cf14f209ed061", "parents": [ "1dc524082208921f6511d923a34110d960b134f9" ], "author": { "name": "Rajendra Nayak", "email": "rnayak@ti.com", "time": "Fri Nov 18 16:47:19 2011 +0530" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Wed Mar 28 10:39:59 2012 -0700" }, "message": "regulator: pass additional of_node to regulator_register()\n\nWith device tree support for regulators, its needed that the\nregulator_dev-\u003edev device has the right of_node attached.\nTo be able to do this add an additional parameter to the\nregulator_register() api, wherein the dt-adapted driver can\nthen pass this additional info onto the regulator core.\n\nChange-Id: Idf7c4e532cc06fd00b8182b635d15dcfafb2cef9\nSigned-off-by: Rajendra Nayak \u003crnayak@ti.com\u003e\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n[mbohan: Update regulator_register for msm regulator drivers]\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "67b54c2342283aff93f94270e8dcc37484c835cf", "tree": "d4d12464bf563a0400bc34d858259deb6ae45097", "parents": [ "5d028cd394fc946677c16acc0fbdbb90313ed33a" ], "author": { "name": "Rajendra Nayak", "email": "rnayak@ti.com", "time": "Fri Nov 18 16:47:17 2011 +0530" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Wed Mar 28 10:39:58 2012 -0700" }, "message": "regulator: helper routine to extract regulator_init_data\n\nThe helper routine is meant to be used by the regulator drivers\nto extract the regulator_init_data structure from the data\nthat is passed from device tree.\n\u0027consumer_supplies\u0027 which is part of regulator_init_data is not extracted\nas the regulator consumer mappings are passed through DT differently,\nimplemented in subsequent patches.\nSimilarly the regulator\u003c--\u003eparent/supply mapping is handled in\nsubsequent patches.\n\nAlso add documentation for regulator bindings to be used to pass\nregulator_init_data struct information from device tree.\n\nSome of the regulator properties which are linux and board specific,\nare left out since its not clear if they can\nbe in someway embedded into the kernel or passed in from DT.\nThey will be revisited later.\n\nChange-Id: I4f270a41687199032499cd923854a871c4d58ca2\nSigned-off-by: Rajendra Nayak \u003crnayak@ti.com\u003e\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "5d028cd394fc946677c16acc0fbdbb90313ed33a", "tree": "643187d9ce77e6e6b2134a79e4752c160dd69b13", "parents": [ "a6e279050d1b3623397fdd32971d743f234ea6ca" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Fri Oct 14 13:36:04 2011 +0100" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Wed Mar 28 10:39:57 2012 -0700" }, "message": "regulator: Constify constraints name\n\nThere\u0027s no need for the API to modify it and having it const makes it\neasier to use with random strings the board code has.\n\nChange-Id: Icd7e600291f281e80f60ef857c22f22cba08bfc1\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n[mbohan: port MSM regulator drivers to new const type]\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "2f81201c28edea80eae4ce88216d82682b4bff52", "tree": "1fadcbaff1951f323ef13723fa778e9b75c75abd", "parents": [ "518a7d333f0382199c81b58afbca62fa37221184" ], "author": { "name": "Rajendra Nayak", "email": "rnayak@ti.com", "time": "Mon Oct 10 21:49:35 2011 +0530" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Wed Mar 28 10:39:56 2012 -0700" }, "message": "dt: add empty dt helpers for non-dt build\n\nAdd empty of_device_is_compatible() and of_parse_phandle() for non-dt\nbuilds to work.\n\nChange-Id: Id91ac5e6f628bb9f7dea5ef57c8727c3f10ee6ce\nSigned-off-by: Rajendra Nayak \u003crnayak@ti.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n[mbohan: resolve merge conflict in include/linux/of.h]\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "cfe9abf1824f8200b9a5056e38c18e7eadf4b30c", "tree": "1b227f6934d8fb06f57f3c8ff2ea6bb0252663ed", "parents": [ "2a0bbda4092f8fc1aec6521592a01c790ff31c64", "3144aa2a81f70268363fc96df3aebfbc2fdf5dda" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 28 08:50:38 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 28 08:50:40 2012 -0700" }, "message": "Merge \"msm: 7x27a: audio: Enable SRS Post processing.\" into msm-3.0" }, { "commit": "b2ad2bae31187ab0cbd0dbd982fbb4e27293897a", "tree": "e3d2d6ac0b566a1e0f899ea918f9795bc91f68d4", "parents": [ "58d901a9e02100c7e6f55071656167f68b83aba2", "d5a0297a2ce7b4a491dd264dbef855e53d95abfa" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 27 22:56:21 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 27 22:56:21 2012 -0700" }, "message": "Merge \"msm: vidc: Extract PAR info for MPEG4/DIVX.\" into msm-3.0" }, { "commit": "d7cf2e931cea51c7ff0a40e6b930edf99b320d8e", "tree": "d8040df3feeffd18876a6a59ec92cae1a7f1e50d", "parents": [ "ad7787fa78c87368f413a30debb0e1e1fdb25b0c" ], "author": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Mon Mar 19 19:38:23 2012 -0700" }, "committer": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Tue Mar 27 18:21:44 2012 -0700" }, "message": "ASoC: wcd9310: Add plug detection through mechanical switch\n\nUse mechanical switch on the phone jack to detect headset/headphone\ninsertion and removal. Mechanical switch is beneficial to avoid fake\nbutton press and high impedance microphone headset detection.\n\nCRs-fixed: 341402\nChange-Id: Idffba14316ab25e07736d1b7385f0edb16216089\nSigned-off-by: Joonwoo Park \u003cjoonwoop@codeaurora.org\u003e\n" }, { "commit": "5b2f5cf05543dadfa09286ebff376bdb43c0bf24", "tree": "5a61f15c3c7d7874027f313cd0077d020702ffbe", "parents": [ "a6a3d3cc58278278da5559687d66e686148fd204", "b9c1a1aa40c99158f65f6710dc4f420e384ef821" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 27 08:10:44 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 27 08:10:44 2012 -0700" }, "message": "Merge changes If10efc64,I5122171f,I39eb1175 into msm-3.0\n\n* changes:\n defconfig: 7627a: Enable Focaltech driver\n board-qrd7627a: Add platform device for focaltech controller\n input: ft5x06_ts: Add driver for ft5x06 series\n" }, { "commit": "a2595074a6528a1a2d28470c11ed14c21081068c", "tree": "1df8e47d55a12a9073ca33f85182be5c423c21d7", "parents": [ "d487812cb7bb16bd4260d9505dc697d001afe24a" ], "author": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Thu Jan 12 22:23:15 2012 +0530" }, "committer": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Tue Mar 27 12:16:22 2012 +0530" }, "message": "input: ft5x06_ts: Add driver for ft5x06 series\n\nFt5x06 controllers are single chip capacitive\ntouch panel controller ICs with a built-in 8 bit\nMicro Controller Unit. It supports multi-touch\ncapability and can detect up to five touches.\n\nChange-Id: I39eb1175d473d1f2c463e1c4a0a1606307da9dc0\nSigned-off-by: Mohan Pallaka \u003cmpallaka@codeaurora.org\u003e\n" }, { "commit": "48ec4d1ef38a243fe047260a033367276d17507b", "tree": "ff896c8994d0b267438bb1fd25a684377808098d", "parents": [ "327f4be627b25c737e2ffa768548cae241edbb19" ], "author": { "name": "Adrian Hunter", "email": "adrian.hunter@intel.com", "time": "Sat Mar 24 23:09:18 2012 +0530" }, "committer": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Tue Mar 27 12:01:46 2012 +0530" }, "message": "mmc: block: support no access to boot partitions\n\nIntel Medfield platform blocks access to eMMC boot partitions which\nresults in switch errors. Since there is no access, mmcboot0/1\ndevices should not be created. Add a host capability to reflect that.\n\nChange-Id: I67d7e1301bb13ce6b01fb44e511ea21cfbf7e4bd\nSigned-off-by: Adrian Hunter \u003cadrian.hunter@intel.com\u003e\nSigned-off-by: Chris Ball \u003ccjb@laptop.org\u003e\n[subhashj@codeaurora.org: Fixed merge conflicts]\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "3144aa2a81f70268363fc96df3aebfbc2fdf5dda", "tree": "044cc530fe14295216c60c2ac97a68382a4b84de", "parents": [ "c6c98b112b695a0df202881afc51ee307433d736" ], "author": { "name": "Sidipotu Ashok", "email": "sashok@codeaurora.org", "time": "Fri Mar 16 10:55:24 2012 +0530" }, "committer": { "name": "Sidipotu Ashok", "email": "sashok@codeaurora.org", "time": "Tue Mar 27 08:52:11 2012 +0530" }, "message": "msm: 7x27a: audio: Enable SRS Post processing.\n\nCode to configure QDSP5 based SRS Post Proc.\n\nChange-Id: Ie137853a90a2780265c419c3b070811ea06abc83\nSigned-off-by: Sidipotu Ashok \u003csashok@codeaurora.org\u003e\n" }, { "commit": "d5a0297a2ce7b4a491dd264dbef855e53d95abfa", "tree": "6b381d8254cb7355de97de2fdc2b69456c20a2f4", "parents": [ "53e7427bf80d8081cbd891968a797d752fef5665" ], "author": { "name": "Arun Menon", "email": "menon@codeaurora.org", "time": "Thu Mar 01 10:51:06 2012 -0800" }, "committer": { "name": "Arun Menon", "email": "menon@codeaurora.org", "time": "Mon Mar 26 16:44:38 2012 -0700" }, "message": "msm: vidc: Extract PAR info for MPEG4/DIVX.\n\nDisplay needs the pixel aspect ratio information\nfrom the video decoder to display the picture\nwith the right aspect ratio. Video decoder extracts\nthe pixel aspect ratio information from the\nvideo core and passes it to the client/display\nas extradata.\n\nChange-Id: I4db2b8ba827af67bc01888d13c36c1b501934ccd\nSigned-off-by: Arun Menon \u003cmenon@codeaurora.org\u003e\n" }, { "commit": "5ded52c2167dd3664cda89ebcd4e9aaaa37dd03a", "tree": "85c18281a855d6ba2dc7f07bbbc217e7fea7a94e", "parents": [ "1f8c5cecfe44994cd617ba2803f41fb56d53e91c" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Mon Mar 26 12:55:52 2012 -0700" }, "committer": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Mon Mar 26 13:04:19 2012 -0700" }, "message": "Revert \"misc: remove android pmem driver, it\u0027s obsolete.\"\n\nThis reverts commit d1e94136fc4fe8ea608f4e9d21befa00c86e1e29.\nThis change was added from Google Android\u0027s tree.\n\nChange-Id: I2202e0eafa31c9f91acbde7137efa65237b68d32\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "d674a5186034805f94e2077c9a3c7068d50769dd", "tree": "84f5f38105772303cfc3d7f04514462a011b5f73", "parents": [ "9eb1d41c6b571cdfea8177c490cfb297ae362f65" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Thu Mar 15 14:06:04 2012 -0700" }, "committer": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Mon Mar 26 11:31:04 2012 -0700" }, "message": "power: pm8921-charger: Add feature to use charger LED\n\nAdd a mechanism to configure the power source of\nthe charger indicator LED anode on the PM8921.\nThe configuration is specified using platform data.\n\nChange-Id: I9a436f634ddfd5d1822f1fc8beab4936fa8bb61d\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "cb655f079b3afbe04fcc4415afae8be75efaee82", "tree": "03a4f80c449f43105dbc9c49cf7d821b640528a5", "parents": [ "fcb443886694399e0f62907cae582ccdd0eeab6f", "c8c016360749d1d457556fc7d3e539296391290a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Mar 25 00:56:45 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Mar 25 00:56:45 2012 -0700" }, "message": "Merge \"Revert \"msm: kgsl: Add per context timestamp\"\" into msm-3.0" }, { "commit": "d3e0aab89fa66640f5f712c2545088d4326d945e", "tree": "3ae662c832b7a029be1a95e8e5cdf86fde1d5c79", "parents": [ "de63ad6cb4e02094817641a8a3b6073eb37437ca", "cb6d300f6c6d6fd5c6407689af4d41680788352a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Mar 25 00:56:45 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Mar 25 00:56:45 2012 -0700" }, "message": "Merge \"hwmon: pm8xxx-adc: Fix Buffer overflow\" into msm-3.0" }, { "commit": "c8c016360749d1d457556fc7d3e539296391290a", "tree": "b4399f0e9999663bb65dbcd1c70a645b71f398c2", "parents": [ "4a08e029e18153f3fc9af66d3ec3580fefdcd00e" ], "author": { "name": "Wei Zou", "email": "wzou@codeaurora.org", "time": "Sat Mar 24 17:27:26 2012 -0700" }, "committer": { "name": "Wei Zou", "email": "wzou@codeaurora.org", "time": "Sat Mar 24 17:29:50 2012 -0700" }, "message": "Revert \"msm: kgsl: Add per context timestamp\"\n\nThis reverts commit 2a811252c73a9beae002c95cdeef974f8be0579f.\n\nChange-Id: Ic3018f19eb1a089ae67e0f3c253cc00e7d0285e3\nSigned-off-by: Wei Zou \u003cwzou@codeaurora.org\u003e\n" }, { "commit": "672228892e42813c7949dacd1c269a8c8a47f24e", "tree": "b15c40838663d9e59721e9895942ebf11213234e", "parents": [ "49b25d982dfc89d850895da974f1e46eede2d3a2", "2a811252c73a9beae002c95cdeef974f8be0579f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Mar 24 00:24:56 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Mar 24 00:24:56 2012 -0700" }, "message": "Merge \"msm: kgsl: Add per context timestamp\" into msm-3.0" }, { "commit": "8c4cf8396cd9afed254cd88a246022948451701a", "tree": "1a3702c0a252ba0140d252c2d02c53b28d1821b4", "parents": [ "9fefc65e436596cf8e4949d5550049ae3a241d52", "53c16f91fbb2ff0350c1a6c2dc081e1a028cf43e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Mar 23 20:50:46 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Mar 23 20:50:46 2012 -0700" }, "message": "Merge \"msm: hwmon: Add EPM ADC driver\" into msm-3.0" }, { "commit": "2a811252c73a9beae002c95cdeef974f8be0579f", "tree": "b0211b1827af39be937153e2995a2d1913370929", "parents": [ "80b6c0a555fdbd8f7b1ed928b4005f91ce21bdcb" ], "author": { "name": "Carter Cooper", "email": "ccooper@codeaurora.org", "time": "Wed Feb 15 09:36:31 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Mar 23 15:44:23 2012 -0600" }, "message": "msm: kgsl: Add per context timestamp\n\nAdd new ioctls for per context timestamps.\nTimestamp functions (read/write/wait) will now be context\nspecific rather than only using the global timestamp.\nPer context timestamps is a requirement for priority\nbased queueing.\n\nChange-Id: I5fdfb816480241b9552ecf90ed1bb22db3a652b5\nSigned-off-by: Carter Cooper \u003cccooper@codeaurora.org\u003e\n" }, { "commit": "53c16f91fbb2ff0350c1a6c2dc081e1a028cf43e", "tree": "36965e97eb7aa47a74df4c75ce0434cc66bc5781", "parents": [ "d2dab70680f9af220017b4f86bc9ae0c66d25171" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Mon Oct 17 15:57:15 2011 -0700" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Fri Mar 23 11:12:20 2012 -0700" }, "message": "msm: hwmon: Add EPM ADC driver\n\nExternal Power Monitor(EPM) uses the external ADS1158 ADC\nto measure voltage and current. Each ADS1158 ADC supports\nmeasuring 16 Analog input channels.\n\nAPQ8064 has support for 2ADS ADC and can measure upto 32\nanalog input channels. The power to the EPM uses a\nSX1509 I2C expander to enable the ADS ADC. Depending on\nthe input channel the appropriate chip select is de-asserted\nto select the ADS ADC to measure the input signal. The\nADS1158 chip is configured through the SPI interface.\n\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\nChange-Id: Ib9f36606b6b183f75754b7763dbe45455c779327\n" }, { "commit": "e812e7421273ed70ed2598dd447d22e61f6ccf90", "tree": "66f3736229bc08c7ac1c2e5a979625a9a65aab9d", "parents": [ "12f87882510f31e444ff8b3a09a1c4a526bef657", "7e25dc1065469110af4a1e7cd8c74aee76ecb1ea" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Mar 23 10:51:04 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Mar 23 10:51:04 2012 -0700" }, "message": "Merge \"mdm9615: Add calibration data for TSENS\" into msm-3.0" }, { "commit": "bfdf4e1ff184f51aa28f4554ebb37b1c3c056d20", "tree": "5cf8974c5faea09a80379c19fd0e56ba37a78980", "parents": [ "cbc4e12cee16578d704cc96a823e8c60cebb3b70", "b6cebfe73583f143311f049b681125f401bc1924" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Mar 23 10:51:04 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Mar 23 10:51:04 2012 -0700" }, "message": "Merge \"msm: kgsl: Remove IOCTL_KGSL_DEVICE_REGREAD from msm_kgsl.h\" into msm-3.0" }, { "commit": "7e25dc1065469110af4a1e7cd8c74aee76ecb1ea", "tree": "d3931bca07fdb223c8d4f6686a5de80821915f1d", "parents": [ "a5de44ce9abc1970a354b2f8b3e06baefc336317" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Mon Mar 19 11:19:27 2012 -0700" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Mar 22 22:37:15 2012 -0700" }, "message": "mdm9615: Add calibration data for TSENS\n\nMDM9615 has identical configuration for the number\nof sensors and slope with MSM8960. Add support to\nenable the TSENS for calibrated parts.\n\nChange-Id: Ieb1f118ce916ab5a4f079b18b11541d86c3a5560\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "cb6d300f6c6d6fd5c6407689af4d41680788352a", "tree": "6b024957257b03cfae0a25b64af5f0894e7cd3bd", "parents": [ "f1d53c43022bdd9b00580689a1ea71490841a934" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Mar 15 10:44:11 2012 -0700" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Mar 22 22:01:42 2012 -0700" }, "message": "hwmon: pm8xxx-adc: Fix Buffer overflow\n\nUse the maximum number of channels added in the\nADC entry list in the board to check for channel\nvalidity. This patch also adds additional checks\nin the driver to validate the requested channel.\n\nCRs-Fixed: 339631\nChange-Id: I347f0d39a00b6ee12976ec2c24843626b54617d4\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "f241e160314a8201b116b934bc4e107ff32e6f30", "tree": "9dd8fc1e7c2ed99006f412177e8780dacc522214", "parents": [ "3678d986fd9303b94ac29223afc2967dd8e02e18", "0332483368f45d2c8b31a6db974992bcaeadb20c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Mar 22 15:52:13 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Mar 22 15:52:14 2012 -0700" }, "message": "Merge changes Ibfd4ba25,Ifc6054cd into msm-3.0\n\n* changes:\n ASoC: wcd9310: Add high impedance headphone detection support\n ASoC: jack: Add API report sock jack without DAPM sync\n" }, { "commit": "069cbac25e1dfc2952ca27f86010704f386d31d6", "tree": "435ccd70207fe9d2d8c17c8848c4c3fed858bf0e", "parents": [ "a7bb217eacf939fd28ce03f0463d7883788b2a31", "d9b4611dea430aecc8cdae55da1155dcb18cd706" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Mar 22 10:55:12 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Mar 22 10:55:12 2012 -0700" }, "message": "Merge changes Ic6cfa7fb,I260ae216,Ib0c17763 into msm-3.0\n\n* changes:\n mmc: core: Remove BROKEN_CLK_GATING quirk for WCN1314 cards\n mmc: msm_sdcc: fixup for enabling MMC_CLKGATE feature for SDIO cards\n mmc: core: Export mmc_set_ios so that host drivers can use it\n" }, { "commit": "0332483368f45d2c8b31a6db974992bcaeadb20c", "tree": "6d96ef3b8be0290819a05b3c28e7e7b2ff74fc22", "parents": [ "a909e1258f62e77235840db1bb3d2c0ff066a12c" ], "author": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Mon Mar 19 19:36:16 2012 -0700" }, "committer": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Wed Mar 21 19:33:02 2012 -0700" }, "message": "ASoC: wcd9310: Add high impedance headphone detection support\n\nIf HPHL and HPHR have relatively high impedance, internal MBHC HPHL\ntrigger cannot trigger so results in headphone/headset detection\nfailure.\nUtilize MIC trigger as well as HPHL trigger in order to detect headphone\nand headset which have high impedance on headphone line.\n\nCRs-fixed: 339390, 337590, 336847, 334339\nChange-Id: Ibfd4ba254197233f2b5e253f5d1fa2a98c848c97\nSigned-off-by: Joonwoo Park \u003cjoonwoop@codeaurora.org\u003e\n" }, { "commit": "2f1493e995ac711f133a74dd16aac45433c343ac", "tree": "624f9a57885758f6677d920267a880cba63ff94a", "parents": [ "14697881a00596d06bce98e4b2c16ea493f85593", "c526ddbaeb3b50c1c86b1b8b096558ad48c893b7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 21 19:01:09 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 21 19:01:13 2012 -0700" }, "message": "Merge \"power: smb349: add support for smb349 charger chip\" into msm-3.0" }, { "commit": "14697881a00596d06bce98e4b2c16ea493f85593", "tree": "56d5fbfea7873596a1601982272f7f814d17466a", "parents": [ "f1d53c43022bdd9b00580689a1ea71490841a934", "89f18c3765a42af16211fe7bdd0e138860f0bc28" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 21 19:01:08 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 21 19:01:13 2012 -0700" }, "message": "Merge \"WLAN: WCN1314: Add card removal notification functionality.\" into msm-3.0" }, { "commit": "970c2a00c6b8032522de798c7a43f59a0c4f9a1e", "tree": "c082ef530cf37805e79f6a89d2453cb716ef1914", "parents": [ "b15a1f4f0971ccf395b592093c7a588a7f7bd35d", "39914be2089ecb76627ba803903e5444886f1337" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 21 13:00:46 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 21 13:00:50 2012 -0700" }, "message": "Merge \"mfd: pm8018-core: Add PMIC thermal alarm device\" into msm-3.0" }, { "commit": "c526ddbaeb3b50c1c86b1b8b096558ad48c893b7", "tree": "55aa0f56a282f92a4d72fb0a888ed47c0c53d91e", "parents": [ "7c3972cd66c44e73abe9b6f202c48aca3323ce6c" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Wed Feb 15 11:32:58 2012 -0800" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Wed Mar 21 08:30:20 2012 -0700" }, "message": "power: smb349: add support for smb349 charger chip\n\nThe SMB349 charger chip allows charge batteries\nwith a higher current. Add this driver to be able to\ncontrol charging from kernel space and deliver charging\ninformation to userspace.\n\nAlso add debugfs entries to show current register\nsettings of SMB349 charger.\n\nChange-Id: Ic88b539304539a49ebe69517d13045cbb18091bf\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n" }, { "commit": "89f18c3765a42af16211fe7bdd0e138860f0bc28", "tree": "2fc09d7d384684afce685ecc40d355ab7455d5fb", "parents": [ "7c3972cd66c44e73abe9b6f202c48aca3323ce6c" ], "author": { "name": "Pavan Kumar", "email": "pavan@codeaurora.org", "time": "Wed Mar 21 14:55:22 2012 +0530" }, "committer": { "name": "Pavan Kumar", "email": "pavan@codeaurora.org", "time": "Wed Mar 21 18:14:50 2012 +0530" }, "message": "WLAN: WCN1314: Add card removal notification functionality.\n\nFunction driver can register for card removal notifications.\nBefore removing the card, let function driver notify the same\nand allow it to cleanup.\n\nChange-Id: I5d423807277bdd7476a6ea7d6a7c9ef71c0725f5\nSigned-off-by: Pavan kumar \u003cpavan@codeaurora.org\u003e\n" }, { "commit": "f4a999cf000da9d53240040f7d63217caaa5f193", "tree": "7ef25a30fabe3703d34a6f968f64a9735f7280f0", "parents": [ "f0410bc6dcacabf599f999f4779091f5cd2c55dc" ], "author": { "name": "Sujit Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Thu Feb 09 23:14:45 2012 +0530" }, "committer": { "name": "Sujit Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Wed Mar 21 14:50:04 2012 +0530" }, "message": "mmc: msm_sdcc: fixup for enabling MMC_CLKGATE feature for SDIO cards\n\nIn the current implementation, turning off SDCC clocks when\nSDIO card is inserted, is controlled by the SDCC driver in\nsuspend/resume callbacks. This makes the dynamic clock gating\n(MMC_CLKGATE) feature, when enabled, to be broken for SDIO cards,\nas configuring of sdio wakeup interrupt is entirely handled\nin system suspend/resume callbacks. Handle this by moving all\nof the wakeup handling code to generic set_ios function which can be\ncalled either from core layer or driver layer.\n\nSince the SDCC controller supports asynchronous notification of\nSDIO card activity when the clocks are off use this for enabling\nMMC_CLKGATE feature which helps in TCX0 during idle state.\n\nAlso, handle the case where the SDIO function driver is not interested\nin waking up the system during suspend but the SDCC driver still\nconfigures DAT1 line as wakeup interrupt.\n\nChange-Id: I260ae2161cfe9160f93e6af4f9b6c34db96397c0\nSigned-off-by: Sujit Reddy Thumma \u003csthumma@codeaurora.org\u003e\n" }, { "commit": "f0410bc6dcacabf599f999f4779091f5cd2c55dc", "tree": "1678929318ff841c2971c3681e7b50c96f9e1002", "parents": [ "7c3972cd66c44e73abe9b6f202c48aca3323ce6c" ], "author": { "name": "Sujit Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Thu Feb 09 20:01:04 2012 +0530" }, "committer": { "name": "Sujit Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Wed Mar 21 14:35:44 2012 +0530" }, "message": "mmc: core: Export mmc_set_ios so that host drivers can use it\n\nmmc_set_ios() is used by host drivers during suspend/resume\nroutines in indirect way i.e., by calling host-\u003eops-\u003eset_ios().\nBut now with MMC_CLKGATE enabled, mmc_set_ios() also updates\nhost-\u003eclk_gated flag. So export this API so that host controller\ndrivers can use it.\n\nChange-Id: Ib0c177635bb8d87ba68c98e08b8d940c73f2b80c\nSigned-off-by: Sujit Reddy Thumma \u003csthumma@codeaurora.org\u003e\n" }, { "commit": "12f67e4b9ef1d639079883bea73967b829db8fc2", "tree": "6182c8cf45668a08e39d9fbf4ac2e155e9735a7d", "parents": [ "9c8ab6d0a6cb7492c46ad099b8b034b17318f099", "a391a8b0bb87613e5ae4b108e5ec32992a5303f0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 20 15:31:16 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 20 15:31:17 2012 -0700" }, "message": "Merge changes If37ca9fd,I1a33be9a,I15d374d1 into msm-3.0\n\n* changes:\n of/irq: Add interrupts-names property to name an irq resource\n of/address: Add reg-names property to name an iomem resource\n of: Add helpers to get one string in multiple strings property\n" }, { "commit": "39914be2089ecb76627ba803903e5444886f1337", "tree": "5fe8381a1c26fefae3ee0b88fbe1811980a9dbbe", "parents": [ "485eeccaf7432832efb3dbcf93c934f7e7b39931" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Mar 20 09:47:21 2012 -0700" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Mar 20 10:07:04 2012 -0700" }, "message": "mfd: pm8018-core: Add PMIC thermal alarm device\n\nRegister a PMIC pm8xxx thermal alarm device in the pm8018-core\ndriver. This device will allow userspace to monitor the\ntemperature of the PMIC die.\n\nChange-Id: I888c0737dd991da9eaec039b20b381a2bfd7923c\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "f460a8a8f3223423a4c4c5950142dccf97850415", "tree": "7718002cd3f5cca56a9fb5073bf4aa09b05513b1", "parents": [ "a351abafa44303ad4cc89c0fb744966c1a5a96ff", "a1648831cda226f9cd57795f90176a4e2df75416" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Mar 19 23:50:54 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Mar 19 23:50:54 2012 -0700" }, "message": "Merge changes Ieea5bcfa,I89564dcc,If8df9333 into msm-3.0\n\n* changes:\n power: pm8921-charger: remove obsolete wakelock\n power: pm8921-charger: calibrate hkadc upon insertion/removal\n power: pm8921-charger: implement ir compensation\n" }, { "commit": "d89cc02f118528d8b6660e3372de9effcf0699ff", "tree": "4a7a86513f1f47de226fe112eb16e60ccd089591", "parents": [ "cf76837260758073496ce6325bcb20e657eb2066" ], "author": { "name": "Benoit Cousson", "email": "b-cousson@ti.com", "time": "Tue Sep 27 17:45:43 2011 +0200" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Mon Mar 19 16:20:19 2012 -0700" }, "message": "of: Add helpers to get one string in multiple strings property\n\nAdd of_property_read_string_index and of_property_count_strings\nto retrieve one string inside a property that will contains\nseverals strings.\n\nChange-Id: I15d374d13ee7711548e3626e49875b6ee8be0e1f\nSigned-off-by: Benoit Cousson \u003cb-cousson@ti.com\u003e\nAcked-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nSigned-off-by: Kevin Hilman \u003ckhilman@ti.com\u003e\n[mbohan@codeaurora.org: resolve conflict in include/linux/of.h]\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "b6cebfe73583f143311f049b681125f401bc1924", "tree": "a062cbaaf29a25eec496a1129f410d1641353b98", "parents": [ "9dabf73bdc26583c2b12fae0276f9333b1c9bfb6" ], "author": { "name": "Harsh Vardhan Dwivedi", "email": "hdwivedi@codeaurora.org", "time": "Thu Mar 15 18:20:59 2012 -0600" }, "committer": { "name": "Harsh Vardhan Dwivedi", "email": "hdwivedi@codeaurora.org", "time": "Mon Mar 19 11:51:57 2012 -0600" }, "message": "msm: kgsl: Remove IOCTL_KGSL_DEVICE_REGREAD from msm_kgsl.h\n\nThe code for IOCTL_KGSL_DEVICE_REGREAD was removed long ago\nbut the header was never cleaned up.\n\nChange-Id: Id3eaf0486fae133dfd72a56ea915f63fcb3f6bb1\nSigned-off-by: Harsh Vardhan Dwivedi \u003chdwivedi@codeaurora.org\u003e\n" }, { "commit": "fbf3bdc54f3f55cd124bf16445402e55f7aa4deb", "tree": "b34d09031cc2f8c54e5a9e158e8bd017390e6004", "parents": [ "0c6c29f630a7fb2b909b3cb3e908022828a0b2bf" ], "author": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Fri Mar 16 21:02:50 2012 -0700" }, "committer": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Fri Mar 16 21:12:39 2012 -0700" }, "message": "diag: Fix incorrect parsing of log codes\n\nDIAG maintains mask info in a buffer. This buffer is parsed\nusing a structure. Recently this structure was modified to add\nanother member. Now, the parsing code has to change to account\nfor this new member, otherwise, the parsing is incorrect and\nmisses certain log codes.\n\nAlso updated log codes with the latest on modem.\n\nChange-Id: Iaaf86e4f3342fd73898eb11124b4893ec79aa564\nSigned-off-by: Shalabh Jain \u003cshalabhj@codeaurora.org\u003e\n" }, { "commit": "a7046bbcfd883bdeae046d32899e953084cdb551", "tree": "487c7f3083c90205ea2a2fd0e8389b488a9fb8d1", "parents": [ "54a38e96ac9dada9ad0b6552eff5f4d0c82bfdb8" ], "author": { "name": "Deva Ramasubramanian", "email": "dramasub@codeaurora.org", "time": "Sat Mar 10 21:11:42 2012 -0800" }, "committer": { "name": "James Melvin", "email": "jmelvin@codeaurora.org", "time": "Fri Mar 16 10:26:51 2012 -0600" }, "message": "[media] v4l: Add new mode for in-band video header in all I-frames\n\nV4L clients should be able to specify the video header to be present\nin all I-frame (as it is common in many broadcasting scenarios). By\nspecifying this mode, V4L clients will receive sps/pps information\nprepended to all I-frames.\n\nChange-Id: Ia93b1d0a59b8d1abf13d1bdb8de494f13ebe1c95\nSigned-off-by: Deva Ramasubramanian \u003cdramasub@codeaurora.org\u003e\n" }, { "commit": "c17ab9bb486aeb309ee38afd4b367bf4ccd062e6", "tree": "1cf4ce3aa599d9b8cb50d0e283da3b50edb7ab96", "parents": [ "7c0d8543727b8b294253701e838944809d63d516", "0ba63b86baedb5ef3a9fa87152ff45e33c2d2289" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 14 22:07:27 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 14 22:07:27 2012 -0700" }, "message": "Merge changes I04eb39d9,If3ce2aaa into msm-3.0\n\n* changes:\n msm: qpnp: Add gpiolib support for PMIC GPIOs\n of: of_spmi: Add support for spmi-dev-container binding\n" }, { "commit": "0ba63b86baedb5ef3a9fa87152ff45e33c2d2289", "tree": "4ec1fbbeea784e9d1f28fdc4770a9fca263707e4", "parents": [ "86622b3ef7ed42713f82dcfc7338b15202097024" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Mon Feb 06 13:42:34 2012 -0800" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Wed Mar 14 14:05:41 2012 -0700" }, "message": "msm: qpnp: Add gpiolib support for PMIC GPIOs\n\nAdd a gpio_chip driver to support the Qualcomm SPMI PMIC\narchitecture called QPNP. The driver supports Device Tree\nand allows a device_node to be registered as a gpio-controller.\n\nThe driver also specifies APIs to allow a non-Device Tree user\nthe ability to configure the PMIC GPIOs.\n\nThis driver does not handle interrupts for GPIOs directly.\nInstead, that work is handled by the existing qpnp-int driver.\nThis is feasible since the interrupt register map for all\nQPNP peripherals is the same.\n\nChange-Id: I04eb39d9855b0957f0647010fcb203ec2fc83c7c\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "86622b3ef7ed42713f82dcfc7338b15202097024", "tree": "dd1390959ade69ff143d25260adb40147cd02072", "parents": [ "5fafd3ce289590ca749004cc061975782b684902" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Wed Feb 08 16:59:00 2012 -0800" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Wed Mar 14 14:05:41 2012 -0700" }, "message": "of: of_spmi: Add support for spmi-dev-container binding\n\nThe spmi-dev-container binding is intended for SPMI\nconfigurations that have multiple device nodes associated with\nonly one spmi_device. By default, if this flag is not specified,\neach device node will create a new spmi_device.\n\nSometimes having multiple spmi_devices for SPMI device nodes is\nsuperfluous. One example of this is gpios. In some architectures,\na single gpio is treated as a unique device. But from a gpio_chip\nperspective, the chip is comprised of many gpios. Beyond wasting\nmemory allocating a unique spmi_device per gpio, the implication\nof not coalescing spmi_devices is that the clients probe() routine\nwould be called N number of times. But this sort of behavior makes\nit difficult to realize when a gpio_chip starts and stops. If we\nassume that one gpio_chip represents one call to probe(), then\nthis problem is solved, since all gpios in that chip will be\npassed as resources.\n\nIn order to support multiple device nodes per spmi_device, we\nalso need to extend the data structures for spmi_resources.\n\nThis change also makes an effort to cleanup some of the error\nhandling for illegal combinations of device bindings, as well as\nadding some additional documentation.\n\nChange-Id: If3ce2aaaa07bdf79e0d9fdedf16419e74a00fbec\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "9b7ac517c23aa68055f25beab417d0d1de391467", "tree": "57489d50eb3da4016165a127016c33a603358c4d", "parents": [ "5fafd3ce289590ca749004cc061975782b684902" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Fri Feb 24 14:42:44 2012 -0800" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Wed Mar 14 13:58:11 2012 -0700" }, "message": "regulator: Add stub regulator support\n\nAdd support for a dummy driver that has an implementation\nconnected to no real hardware devices. Its purpose is to aid\nbringup scenarios by providing clients a regulator interface\nthat they expect. This driver shouldn\u0027t be enabled if a real\ndevice implementation for a particular platform already exists.\n\nChange-Id: Ib83027b4e599ebbc3cb153b2f346bb03495bb746\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "5fafd3ce289590ca749004cc061975782b684902", "tree": "268467040f4b02d1f8f83752b2226a98dab86480", "parents": [ "b27ac2ec32d96af0dee90f2b8136e359b32ddb99", "08166fc6f488afef37101a63881ec01613971952" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 14 12:14:20 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 14 12:14:20 2012 -0700" }, "message": "Merge \"net/wireless: Support to disable CCK rate for management frame\" into msm-3.0" }, { "commit": "40491ce8d0543bb0d81d855b7742f078a404d85f", "tree": "6f836691142d4b870e2ef6970d2221e3b186d6a0", "parents": [ "f15a5d72151f510fee354f4e426079d9a6cad4c1" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Nov 07 11:38:54 2011 -0800" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Mar 14 10:41:08 2012 -0700" }, "message": "power: pm8921-charger: implement ir compensation\n\nThe charger hardware has a +/-30mv error for vdd_max settings. This\nmeans that when vdd_max is set to 4200mV the actual voltage on vph_pwr\nline could range from 4170mV to 4230mV. This further means that when\nconstant current to constant voltage transition happens, the battery\nmay not be charged up to 4200mV - leading to an premature end of charge.\n\nFix this by implementing periodic IR compensation. On a device measure the\nresistance from the vbat terminal to the ground by shorting the +ve and\n-ve of the battery terminals (without a battery), this will be referred to\nas rconn in the description. In the code it is rconn_mohm to reflect the\nunits.\n\nThe voltage at battery terminal will be\nVbat(terminal) \u003d Vbat(xoadc) + Ibat * rconn\nwhere Ibat is the current flowing out of (or into if -ve) of the battery.\n\nVbat(xoadc) and Ibat can be obtained by using the override mode of the\nbms. So Vbat(terminal) can be deduced and compensated by increasing\nvdd_max. This also helps in increasing constant current mode thereby\ndecreasing constant voltage mode and decreasing the overall charging time.\n\nThe value of rconn will be specific to a PCB layout, it is\npassed in from platform_data.\n\nChange-Id: If8df93333ca6b0bad35505895a4fc5577562fadd\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "08166fc6f488afef37101a63881ec01613971952", "tree": "b52e0cd9e58efab9bd47f3054bbd1b444595a8d2", "parents": [ "bd404367576fa00bde02187899ba3824fb8a48f2" ], "author": { "name": "Sunil Dutt Undekari", "email": "duttus@codeaurora.org", "time": "Mon Mar 05 21:01:23 2012 +0530" }, "committer": { "name": "Sunil Dutt Undekari", "email": "duttus@codeaurora.org", "time": "Wed Mar 14 14:23:14 2012 +0530" }, "message": "net/wireless: Support to disable CCK rate for management frame\n\nProvision to distinguish the P2P scan and the normal scan\nwith no_cck flag and thus disable the 11b rates for\np2p scan.\n\nChange-Id: Ia4073a5f926c6ac97dffdee99f54ba53535fea85\nSigned-off-by: Sunil Dutt Undekari\u003cduttus@codeaurora.org\u003e\n" }, { "commit": "a3152031da5d2dbce83bd0ab8b56b31108ad6255", "tree": "ac2fad78ff7cd90fac84ce593f0fca9f95cd1c0e", "parents": [ "a36dc2ca7d9c0b71ffaef2fcdcaae9a211add39e" ], "author": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Mon Mar 05 16:29:30 2012 +0530" }, "committer": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Tue Mar 13 11:39:37 2012 +0530" }, "message": "USB: OTG: msm: Add support for SRP and HNP\n\nThis patch changes OTG driver to support different\nOTG statemachine states for OTG2.0 complaince. It will\nalso enable to swap Host role between two OTG devices\nvia HNP and enable B device to request A device to start\nVBUS session via SRP.\n\nChange-Id: Ibe2519ff1570768f51e879af483a6f5c23b38d8f\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\nSigned-off-by: Pavankumar Kondeti \u003cpkondeti@codeaurora.org\u003e\n" }, { "commit": "ce8927b4fe39d5456444eca4fc404832254a28b1", "tree": "87d3bdd8afbafbac78486ca9616e5e117b2a60b7", "parents": [ "72aac4f17c161434e27803673f2ee548b0e78ded", "ab77b1b6341e20760ada76e1735614d64594bb0b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Mar 10 09:51:46 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Mar 10 09:51:46 2012 -0800" }, "message": "Merge changes I58e8325e,Idaeae269,If5723f0d,I49a84dca,I1241f952 into msm-3.0\n\n* changes:\n msm: Define 4 domains for IOMMU\n gpu: ion: Delay unmapping from IOMMU.\n gpu: ion: Add map_dma support in IOMMU heap\n gpu: ion: Add cache operations to IOMMU heap\n gpu: ion: Allow smaller mappings\n" }, { "commit": "b36765960a60150af1c0faea0e0535123d40f90e", "tree": "1511257cb997ec1c5b54c531299556520b8460c2", "parents": [ "ab804b883a58c44df40e92940ac4dae3a91e7beb" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Fri Mar 02 15:02:25 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Fri Mar 09 09:49:47 2012 -0800" }, "message": "gpu: ion: Delay unmapping from IOMMU.\n\nDue to limitations in the multimedia architecure\nclients might not know when a buffer can be unmapped\nfrom the IOMMU. In addition, the multimedia architecture\ncauses unnecessary mappings/unmappings for the same buffers\nwhich reduces framerates.\n\nAdd logic to delay unmapping from the IOMMU\nuntil buffer memory is freed and unmap any outstanding\nmappings to avoid virtual memory address space leak.\n\nChange-Id: Idaeae269d9ba623e25a0cb087a89b4cbb63915af\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "e7365af9973648080e5a301b7fc5a862899b3192", "tree": "47805eb6cce8872dfa54ef2a65cfa4f301e409b9", "parents": [ "765eaaffb8b2011a1bd4a9e0e92cdd50669a9ffc", "10f1551c50ff4ae333a165d21830f64c41d98b6f" ], "author": { "name": "David Brown", "email": "davidb@codeaurora.org", "time": "Mon Mar 05 10:19:45 2012 -0800" }, "committer": { "name": "David Brown", "email": "davidb@codeaurora.org", "time": "Fri Mar 09 08:25:28 2012 -0800" }, "message": "Merge remote-tracking branch \u0027idos/usb3-msm-3.0-backport-dwc3\u0027 into merge/idos\n\nMerge a backport of the following 82 commits from the 3.2 kernel.\n\ncommit 10f1551c50ff4ae333a165d21830f64c41d98b6f\nAuthor: Yu Xu \u003cyuxu@marvell.com\u003e\nDate: Sat Dec 10 00:03:33 2011 +0800\n\n usb: gadget: storage: release superspeed descriptors.\n\n Release superspeed mass storage descriptors memory\n when the function is unbind.\n\n Signed-off-by: Yu Xu \u003cyuxu@marvell.com\u003e\n Acked-by: Michal Nazarewicz \u003cmina86@mina86.com\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/gadget/f_mass_storage.c | 1 +\n 1 files changed, 1 insertions(+), 0 deletions(-)\n\ncommit 1d6d304680b8f9e3b71b896839484f436775953c\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Mon Oct 3 16:39:30 2011 +0300\n\n usb: gadget: core: fix bug when removing gadget drivers\n\n usb_gadget_disconnect() is responsible of removing\n data pullups. Before doing that we must, first, tell\n gadget driver we\u0027re disconnecting (by calling disconnect\n method on gadget driver structure), unbind the gadget\n driver and stop the controller.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/gadget/udc-core.c | 4 ++--\n 1 files changed, 2 insertions(+), 2 deletions(-)\n\ncommit 145cbade27d931fcb6e3c42325256b0bb9744490\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Wed Aug 3 13:33:27 2011 +0200\n\n usb: gadget: storage: add superspeed support\n\n this patch adds superspeed descriptors for the\n storage gadgets.\n\n Acked-by: Michal Nazarewicz \u003cmina86@mina86.com\u003e\n Acked-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n [idos@codeaurora.org: Conflicts: drivers/usb/gadget/storage_common.c]\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/gadget/f_mass_storage.c | 22 ++++++\n drivers/usb/gadget/file_storage.c | 59 +++++++++++++---\n drivers/usb/gadget/mass_storage.c | 2 +-\n drivers/usb/gadget/storage_common.c | 127 +++++++++++++++++++++++++++++++++++\n 4 files changed, 199 insertions(+), 11 deletions(-)\n\ncommit b0c3e7fb4d56f5c4cfea87e682fb02e88f98d887\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Mon Oct 10 09:43:44 2011 +0300\n\n usb: gadget: fix typo for default U1/U2 exit latencies\n\n s/DEFULT/DEFAULT/, no functional changes.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/gadget/composite.c | 4 ++--\n include/linux/usb/gadget.h | 4 ++--\n 2 files changed, 4 insertions(+), 4 deletions(-)\n\ncommit 834e066cffb0c95d6168df9bf70c66d499a198cd\nAuthor: Paul Zimmerman \u003cPaul.Zimmerman@synopsys.com\u003e\nDate: Fri Sep 30 15:26:06 2011 -0700\n\n usb: gadget: storage: fix mass storage gadgets to work with Synopsys UDC\n\n The Synopsys USB device controller requires all OUT transfer request\n lengths to be aligned to max packet size. The mass storage gadgets do\n not meet this requirement for Super Speed. The gadgets already have a\n function which performs this alignment for CBW packets, so use it for\n data packets too.\n\n The alternative would be to implement bounce buffers in the DWC3\n driver, but that could have a significant impact on performance.\n\n This version is based upon a more-correct patch written by Alan\n Stern.\n\n Signed-off-by: Paul Zimmerman \u003cpaulz@synopsys.com\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/gadget/f_mass_storage.c | 18 +++++++++---------\n drivers/usb/gadget/file_storage.c | 18 +++++++++---------\n 2 files changed, 18 insertions(+), 18 deletions(-)\n\ncommit 7295baf1792683000d7d78f7720b1e022d6d096a\nAuthor: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nDate: Thu Aug 18 20:29:00 2011 +0200\n\n USB: gadget: storage: remove alignment assumption\n\n This patch (as1481) fixes a problem affecting g_file_storage and\n g_mass_storage when running at SuperSpeed. The two drivers currently\n assume that the bulk-out maxpacket size can evenly divide the SCSI\n block size, which is 512 bytes. But SuperSpeed bulk endpoints have a\n maxpacket size of 1024, so the assumption is no longer true.\n\n This patch removes that assumption from the drivers, by getting rid of\n a small optimization (they try to align VFS reads and writes on page\n cache boundaries). If a command\u0027s starting logical block address is\n 512 bytes below the end of a page, it\u0027s not okay to issue a USB\n command for just those 512 bytes when the maxpacket size is 1024 -- it\n would result in either babble (for an OUT transfer) or a short packet\n (for an IN transfer).\n\n Also, for backward compatibility, the test for writes extending beyond\n the end of the backing storage has to be changed. If the host tries\n to do this, we should accept the data that fits in the backing storage\n and ignore the rest. Because the storage\u0027s end may not align with a\n USB packet boundary, this means we may have to accept a USB OUT\n transfer that extends beyond the end of the storage and then write out\n only the part of the data that fits.\n\n Signed-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\n Acked-by: Michal Nazarewicz \u003cmina86@mina86.com\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n [idos@codeaurora.org: Conflicts: drivers/usb/gadget/f_mass_storage.c\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/gadget/f_mass_storage.c | 64 ++++++++++++---------------------\n drivers/usb/gadget/file_storage.c | 67 ++++++++++++++---------------------\n 2 files changed, 50 insertions(+), 81 deletions(-)\n\ncommit 9e5eb17594ed8be0ee92e3d696234bf70c409d8c\nAuthor: Peiyu Li \u003cpeiyu.li@csr.com\u003e\nDate: Wed Aug 17 22:52:59 2011 -0700\n\n usb: gadget: storage: adapt logic block size to bound block devices\n\n Now the mass storage driver has fixed logic block size of 512 bytes.\n\n The mass storage gadget read/write bound devices only through VFS, so the\n bottom level devices actually are just RAW devices to the driver and connected\n PC. As a RAW, hosts can always format, read and write it right in 512 bytes\n logic block and don\u0027t care about the actual logic block size of devices bound\n to the gadget.\n\n But if we want to share the bound block device partition between target board\n and PC, in case the logic block size of the bound block device is 4KB, we\n execute the following steps:\n\n 1. connect a board with mass storage gadget to PC(the board has set one\n \tpartition of on-board block device as file name of the mass storage)\n 2. PC format the mass storage to VFAT by default logic block size and\n \tread/write it\n 3. disconnect boards from PC\n 4. target board mount the partition as VFAT\n\n Step 4 will fail since kernel on target thinks the logic block size of the\n bound partition as 4KB.\n A typical error is \"FAT: logical sector size too small for device (logical\n sector size \u003d 512)\"\n\n If we execute opposite steps:\n 1. format the partition to VFAT on target board and read/write this partition\n 2. connect the board to Windows PC as usb mass storage gadget, windows will\n \tthink the disk is not formatted\n\n So the conclusion is that only as a gadget, the mass storage driver has no any\n problem. But being shared VFAT or other filesystem on PC and target board, it\n will fail.\n\n This patch adapts logic block size to bound block devices and fix the issue.\n\n Cc: Michal Nazarewicz \u003cmina86@mina86.com\u003e\n Acked-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\n Signed-off-by: Peiyu Li \u003cpeiyu.li@csr.com\u003e\n Signed-off-by: Xianglong Du \u003cxianglong.du@csr.com\u003e\n Signed-off-by: Huayi Li \u003chuayi.li@csr.com\u003e\n Signed-off-by: Barry Song \u003cBaohua.Song@csr.com\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/gadget/f_mass_storage.c | 63 ++++++++++++++++++++--------------\n drivers/usb/gadget/file_storage.c | 50 +++++++++++++--------------\n drivers/usb/gadget/storage_common.c | 23 ++++++++++---\n 3 files changed, 79 insertions(+), 57 deletions(-)\n\ncommit 26bba694a44e3362be7028fc26fab172b2fc3581\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Mon Dec 19 13:45:01 2011 +0200\n\n usb: gadget: epautoconf: do not change number of streams\n\n We should not change gadget driver\u0027s descriptors just\n because we think it\u0027s right to do so.\n\n There are several of reasons which would support this\n statement but it suffices to say that this was probably\n never tested because it updates bmAttributes without\n asking the driver if it\u0027s ok to do so.\n\n This means that e.g. on UASP gadget it would enable\n stream support even for the command endpoint which must\n not have stream support enabled.\n\n In fact, this change is fixing the bug introduced by\n commit a59d6b9 (usb: gadget: add streams support to\n the gadget framework) which was caught when testing\n UASP gadget with dwc3 driver.\n\n Cc: Tatyana Brokhman \u003ctlinder@codeaurora.org\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/gadget/epautoconf.c | 3 ---\n 1 files changed, 0 insertions(+), 3 deletions(-)\n\ncommit fb5591ebf5788355f0a424103b2bf47a62d6860d\nAuthor: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\nDate: Thu Jun 23 14:26:15 2011 +0200\n\n usb: gadget: udc-core: add \"new-style\" registration interface\n\n udc_start() should only trigger the internal state machine and make\n minimal house keeping. Before that call udc-core calls the bind()\n callback and after the callback the pullup().\n\n udc_stop() is simillar, udc-core calls pullup(), unbind() and finally\n udc_stop().\n\n Signed-off-by: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/gadget/udc-core.c | 75 ++++++++++++++++++++++++++++++++++++++--\n include/linux/usb/gadget.h | 6 +++\n 2 files changed, 77 insertions(+), 4 deletions(-)\n\ncommit 0d0c240fac20e525a3e967a0d6e9410c51f1c892\nAuthor: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\nDate: Thu Jun 23 14:26:11 2011 +0200\n\n usb: gadget: defer setting maxpacket till -\u003esetup()\n\n maxpacket is set by the udc driver for ep0 very early. This value is\n copied by the function gadget used later for the USB_DT_DEVICE and\n USB_DT_DEVICE_QUALIFIER query. This seems to work fine so far. For USB3\n we need set a different value here. In SS speed it is 2^x with x\u003d9 and\n in HS we set something \u003c\u003d 64. If the UDC starts in SS and continues in\n HS after the cable has been plugged it will report a too small value.\n There setting of this value is defered and taken automaticly from the\n ep0 pointer where the UDC driver can update it according to the speed it\n detected _after_ a cable has been plugged.\n\n Signed-off-by: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/gadget/composite.c | 3 +--\n drivers/usb/gadget/dbgp.c | 2 +-\n drivers/usb/gadget/file_storage.c | 10 ++++++----\n drivers/usb/gadget/gmidi.c | 3 +--\n drivers/usb/gadget/inode.c | 5 ++---\n drivers/usb/gadget/printer.c | 14 +++++++++-----\n 6 files changed, 20 insertions(+), 17 deletions(-)\n\ncommit bc2aa11468283f03aa8749b217a6c15bfaff4776\nAuthor: Tatyana Brokhman \u003ctlinder@codeaurora.org\u003e\nDate: Wed Jun 29 16:41:50 2011 +0300\n\n usb: gadget: add SuperSpeed support to the Gadget Framework\n\n SuperSpeed USB has defined a new descriptor, called\n the Binary Device Object Store (BOS) Descriptor. It\n has also changed a bit the definition of SET_FEATURE\n and GET_STATUS requests to add USB3-specific details.\n\n This patch implements both changes to the Composite\n Gadget Framework.\n\n [ balbi@ti.com : slight changes to commit log\n \t\t fixed a compile error on ARM ]\n\n Signed-off-by: Tatyana Brokhman \u003ctlinder@codeaurora.org\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/gadget/Kconfig | 6 +\n drivers/usb/gadget/composite.c | 257 ++++++++++++++++++++++++++++++++++++---\n drivers/usb/gadget/epautoconf.c | 6 +-\n include/linux/usb/composite.h | 14 ++\n include/linux/usb/gadget.h | 31 +++++\n 5 files changed, 293 insertions(+), 21 deletions(-)\n\ncommit 3ba28906aefd21a6aaf01e3b04c2410dabce3c97\nAuthor: Tatyana Brokhman \u003ctlinder@codeaurora.org\u003e\nDate: Wed Jun 29 16:41:49 2011 +0300\n\n usb: gadget: add max_speed to usb_composite_driver\n\n This field is used by the Gadget drivers to specify\n the maximum speed they support, meaning: the maximum\n speed they can provide descriptors for.\n\n The driver speed will be set in consideration of this\n value.\n\n [ balbi@ti.com : dropped the ifdeffery ]\n\n Signed-off-by: Tatyana Brokhman \u003ctlinder@codeaurora.org\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n [idos@codeaurora.org: added max_speed also to android.c]\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/gadget/android.c | 1 +\n drivers/usb/gadget/audio.c | 1 +\n drivers/usb/gadget/cdc2.c | 1 +\n drivers/usb/gadget/composite.c | 2 ++\n drivers/usb/gadget/ether.c | 1 +\n drivers/usb/gadget/g_ffs.c | 1 +\n drivers/usb/gadget/hid.c | 1 +\n drivers/usb/gadget/mass_storage.c | 1 +\n drivers/usb/gadget/multi.c | 1 +\n drivers/usb/gadget/ncm.c | 1 +\n drivers/usb/gadget/nokia.c | 1 +\n drivers/usb/gadget/serial.c | 1 +\n drivers/usb/gadget/webcam.c | 1 +\n drivers/usb/gadget/zero.c | 1 +\n include/linux/usb/composite.h | 2 ++\n 15 files changed, 17 insertions(+), 0 deletions(-)\n\ncommit 081412dc449284905c831f2fe2d9877238c07bef\nAuthor: Tatyana Brokhman \u003ctlinder@codeaurora.org\u003e\nDate: Tue Jun 28 16:33:53 2011 +0300\n\n usb: gadget: add streams support to the gadget framework\n\n This patch defines necessary fields to support\n streaming for USB3.0.\n\n It implements a new function, called\n usb_ep_autoconfig_ss(), to be used instead of the\n existing usb_ep_autoconfig() when working in\n SuperSpeed mode and there is a need to search for\n an endpoint according to the number of required\n streams.\n\n [ balbi@ti.com : slight changes to commit log ]\n\n Signed-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n Signed-off-by: Tatyana Brokhman \u003ctlinder@codeaurora.org\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/gadget/epautoconf.c | 125 +++++++++++++++++++++++++++++++--------\n include/linux/usb/gadget.h | 13 ++++\n 2 files changed, 113 insertions(+), 25 deletions(-)\n\ncommit 5ef53d97a119d96087b3afee6495b964b71e1c55\nAuthor: Tatyana Brokhman \u003ctlinder@codeaurora.org\u003e\nDate: Tue Jun 28 16:33:52 2011 +0300\n\n usb: gadget: coding style fix\n\n fix the coding style of a few switches on the\n gadget framework.\n\n [ balbi@ti.com : add a commit log ]\n\n Signed-off-by: Tatyana Brokhman \u003ctlinder@codeaurora.org\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/gadget/composite.c | 16 ++++++++++---\n drivers/usb/gadget/dummy_hcd.c | 48 ++++++++++++++++++++++++++++++----------\n 2 files changed, 48 insertions(+), 16 deletions(-)\n\ncommit 31ac35219203686655b8936ee9cffbe9d407e85f\nAuthor: Tatyana Brokhman \u003ctlinder@codeaurora.org\u003e\nDate: Tue Jun 28 15:33:50 2011 +0200\n\n usb: gadget: use config_ep_by_speed() instead of ep_choose()\n\n Remove obsolete functions:\n 1. ep_choose()\n 2. usb_find_endpoint()\n\n Signed-off-by: Tatyana Brokhman \u003ctlinder@codeaurora.org\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n [idos@codeaurora.org: Changed also the following files to\n comply with this commit: f_accessory.c,f_adb.c,f_diag.c,f_mtp.c,\n f_rmnet.c,f_rmnet_sdio,f_rmnet_smd,f_rmnet_smd_sdio,f_serial.f_ccid.c.\n Also merged a patch in f_serial.c for checking return value of\n config_ep_by_speed, see \"usb: gadget: fix g_serial regression\".\n Also fix a bug in ci13xxx_udc. Since f_serial is now checking if the endpoint\n descriptors are null in the set_alt function, need to set them to null on\n ep_disable in case of cable disconnect. Since the ep descriptor was inserted to\n struct usb_ep in \"usb: gadget: add usb_endpoint_descriptor to struct usb_ep\",\n also set mEp-\u003eep.desc to NULL. I have upstream this to the community, please\n see \"usb: gadget: Clear usb_endpoint_descriptor inside the struct usb_ep\" in\n the latest linux kernel.]\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/gadget/ci13xxx_udc.c | 1 +\n drivers/usb/gadget/config.c | 26 -------------\n drivers/usb/gadget/f_accessory.c | 30 +++++++++++-----\n drivers/usb/gadget/f_acm.c | 46 +++++++-----------------\n drivers/usb/gadget/f_adb.c | 30 +++++++++++----\n drivers/usb/gadget/f_ccid.c | 54 +++++++++++-----------------\n drivers/usb/gadget/f_diag.c | 13 ++++---\n drivers/usb/gadget/f_ecm.c | 45 +++++++----------------\n drivers/usb/gadget/f_eem.c | 32 +++++------------\n drivers/usb/gadget/f_hid.c | 19 +++-------\n drivers/usb/gadget/f_loopback.c | 11 ++++--\n drivers/usb/gadget/f_mass_storage.c | 46 ++++++++++--------------\n drivers/usb/gadget/f_mtp.c | 30 +++++++++++----\n drivers/usb/gadget/f_ncm.c | 49 ++++++++------------------\n drivers/usb/gadget/f_obex.c | 32 +++++------------\n drivers/usb/gadget/f_phonet.c | 12 +++---\n drivers/usb/gadget/f_rmnet.c | 48 ++++++++-----------------\n drivers/usb/gadget/f_rmnet_sdio.c | 62 ++++++++++++++++++++++++++------\n drivers/usb/gadget/f_rmnet_smd.c | 38 +++++++++++++++-----\n drivers/usb/gadget/f_rmnet_smd_sdio.c | 63 ++++++++++++++++++++++++++------\n drivers/usb/gadget/f_rndis.c | 46 +++++++-----------------\n drivers/usb/gadget/f_serial.c | 53 +++++++++-------------------\n drivers/usb/gadget/f_sourcesink.c | 8 +++-\n drivers/usb/gadget/f_subset.c | 29 +++------------\n drivers/usb/gadget/file_storage.c | 12 ++++++\n drivers/usb/gadget/storage_common.c | 11 ------\n include/linux/usb/composite.h | 15 --------\n include/linux/usb/gadget.h | 6 ---\n 28 files changed, 392 insertions(+), 475 deletions(-)\n\ncommit cf64ce49541e865b66abc2b2c7bb87e59c7a1f7e\nAuthor: Tatyana Brokhman \u003ctlinder@codeaurora.org\u003e\nDate: Tue Jun 28 16:33:49 2011 +0300\n\n usb: gadget: configure endpoint according to gadget speed\n\n Add config_ep_by_speed() to configure the endpoint\n according to the gadget speed.\n\n Using this function will spare the FDs from handling\n the endpoint chosen descriptor.\n\n Signed-off-by: Tatyana Brokhman \u003ctlinder@codeaurora.org\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/gadget/composite.c | 85 +++++++++++++++++++++++++++++++++++++++\n drivers/usb/gadget/epautoconf.c | 1 +\n include/linux/usb/composite.h | 3 +\n include/linux/usb/gadget.h | 3 +\n 4 files changed, 92 insertions(+), 0 deletions(-)\n\ncommit cf709c115c55e8497a2b538ba492f9e8bc3db941\nAuthor: Tatyana Brokhman \u003ctlinder@codeaurora.org\u003e\nDate: Tue Jun 28 16:33:48 2011 +0300\n\n usb: gadget: add usb_endpoint_descriptor to struct usb_ep\n\n Change usb_ep_enable() prototype to use endpoint\n descriptor from usb_ep.\n\n This optimization spares the FDs from saving the\n endpoint chosen descriptor. This optimization is\n not full though. To fully exploit this change, one\n needs to update all the UDCs as well since in the\n current implementation each of them saves the\n endpoint descriptor in it\u0027s internal (and extended)\n endpoint structure.\n\n Signed-off-by: Tatyana Brokhman \u003ctlinder@codeaurora.org\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n [idos@codeaurora.org: Added more changes for the following files\n since API break with msm code tree: ci13xxx_udc.c,f_accessory,f_adb,\n f_diag,f_mtp,f_rmnet,f_rmnet_sdio,f_rmnet_smd, f_rmnet_smd_sdio,u_bam.c,\n u_sdio.c,u_rmnet.h,u_sdio.c,u_smd.c,f_ccid.c,u_data_hsic.c]\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/gadget/ci13xxx_udc.c | 6 ++++--\n drivers/usb/gadget/dbgp.c | 8 +++++---\n drivers/usb/gadget/f_accessory.c | 16 ++++++++++------\n drivers/usb/gadget/f_acm.c | 9 ++++-----\n drivers/usb/gadget/f_adb.c | 14 ++++++++------\n drivers/usb/gadget/f_audio.c | 5 ++---\n drivers/usb/gadget/f_ccid.c | 15 ++++++---------\n drivers/usb/gadget/f_diag.c | 12 +++++-------\n drivers/usb/gadget/f_ecm.c | 17 ++++++++---------\n drivers/usb/gadget/f_eem.c | 10 +++++-----\n drivers/usb/gadget/f_fs.c | 3 ++-\n drivers/usb/gadget/f_hid.c | 5 ++---\n drivers/usb/gadget/f_loopback.c | 14 ++++++--------\n drivers/usb/gadget/f_mass_storage.c | 3 ++-\n drivers/usb/gadget/f_mtp.c | 17 ++++++++++-------\n drivers/usb/gadget/f_ncm.c | 17 ++++++++---------\n drivers/usb/gadget/f_obex.c | 6 +++---\n drivers/usb/gadget/f_phonet.c | 9 ++++-----\n drivers/usb/gadget/f_rmnet.c | 9 ++++-----\n drivers/usb/gadget/f_rmnet_sdio.c | 15 +++++++++------\n drivers/usb/gadget/f_rmnet_smd.c | 15 +++++++++------\n drivers/usb/gadget/f_rmnet_smd_sdio.c | 15 +++++++++------\n drivers/usb/gadget/f_rndis.c | 15 +++++++--------\n drivers/usb/gadget/f_serial.c | 9 ++++-----\n drivers/usb/gadget/f_sourcesink.c | 10 ++++------\n drivers/usb/gadget/f_subset.c | 8 ++++----\n drivers/usb/gadget/f_uvc.c | 6 ++++--\n drivers/usb/gadget/file_storage.c | 3 ++-\n drivers/usb/gadget/gmidi.c | 6 ++++--\n drivers/usb/gadget/inode.c | 6 ++++--\n drivers/usb/gadget/printer.c | 26 ++++++++++++++------------\n drivers/usb/gadget/u_bam.c | 8 ++++----\n drivers/usb/gadget/u_data_hsic.c | 10 ++--------\n drivers/usb/gadget/u_ether.c | 12 ++++++------\n drivers/usb/gadget/u_ether.h | 4 ----\n drivers/usb/gadget/u_rmnet.h | 2 --\n drivers/usb/gadget/u_sdio.c | 4 ++--\n drivers/usb/gadget/u_serial.c | 4 ++--\n drivers/usb/gadget/u_serial.h | 2 --\n drivers/usb/gadget/u_smd.c | 4 ++--\n include/linux/usb/gadget.h | 16 +++++++---------\n 41 files changed, 197 insertions(+), 198 deletions(-)\n\ncommit d23607a2eb7b23fa0fa9e797da6804d583bef73d\nAuthor: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\nDate: Tue Jun 28 16:33:47 2011 +0300\n\n usb: gadget: convert all users to the new udc infrastructure\n\n peripheral drivers are using usb_add_gadget()/usb_del_gadget() to\n register/unregister to the udc-core.\n\n The udc-core will take the first available gadget driver and attach\n function driver which is calling usb_gadget_register_driver(). This is\n the same behaviour we have right now.\n\n Only dummy_hcd was tested, the others were compiled tested.\n\n Cc: Alan Stern \u003cstern@rowland.harvard.edu\u003e\n Cc: Anton Tikhomirov \u003cav.tikhomirov@samsung.com\u003e\n Cc: Ben Dooks \u003cben-linux@fluff.org\u003e\n Cc: Dan Carpenter \u003cerror27@gmail.com\u003e\n Cc: Darius Augulis \u003caugulis.darius@gmail.com\u003e\n Cc: Eric Miao \u003ceric.y.miao@gmail.com\u003e\n Cc: Jingoo Han \u003cjg1.han@samsung.com\u003e\n Cc: Kukjin Kim \u003ckgene.kim@samsung.com\u003e\n Cc: Kuninori Morimoto \u003ckuninori.morimoto.gx@renesas.com\u003e\n Cc: Li Yang \u003cleoli@freescale.com\u003e\n Cc: Michael Hennerich \u003cmichael.hennerich@analog.com\u003e\n Acked-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n Cc: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\n Cc: Pavankumar Kondeti \u003cpkondeti@codeaurora.org\u003e\n Cc: Roy Huang \u003croy.huang@analog.com\u003e\n Cc: Russell King \u003clinux@arm.linux.org.uk\u003e\n Cc: Toshiharu Okada \u003ctoshiharu-linux@dsn.okisemi.com\u003e\n Cc: Xiaochen Shen \u003cxiaochen.shen@intel.com\u003e\n Cc: Yoshihiro Shimoda \u003cshimoda.yoshihiro@renesas.com\u003e\n Cc: Yuan-Hsin Chen \u003cyhchen@faraday-tech.com\u003e\n Cc: cxie4 \u003ccxie4@marvell.com\u003e\n Cc: linux-geode@lists.infradead.org\n Signed-off-by: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n [idos@codeaurora.org:\n Conflicts: drivers/usb/gadget/ci13xxx_udc.c\n msm72k_udc.c: This driver is not exists in Linux community,so fix this one too.\n cyasgadget.c: combine other patch from the community (\"convert cyasgadget to new udc core\")\n into this commit. Removed the #if 0 block that was in the community version and fix\n the cause problem, because of which it was under #if 0 block]\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n .../staging/westbridge/astoria/gadget/cyasgadget.c | 26 ++++++++++++++--\n drivers/usb/gadget/Makefile | 1 +\n drivers/usb/gadget/amd5536udc.c | 18 ++++++++---\n drivers/usb/gadget/at91_udc.c | 20 +++++++++---\n drivers/usb/gadget/atmel_usba_udc.c | 26 ++++++++++++++--\n drivers/usb/gadget/ci13xxx_udc.c | 30 ++++++++++++++-----\n drivers/usb/gadget/dummy_hcd.c | 31 +++++++++++++------\n drivers/usb/gadget/fsl_qe_udc.c | 20 ++++++++++--\n drivers/usb/gadget/fsl_udc_core.c | 20 ++++++++++--\n drivers/usb/gadget/fusb300_udc.c | 15 +++++++--\n drivers/usb/gadget/goku_udc.c | 19 +++++++++---\n drivers/usb/gadget/imx_udc.c | 20 +++++++++---\n drivers/usb/gadget/langwell_udc.c | 20 ++++++++----\n drivers/usb/gadget/m66592-udc.c | 17 ++++++++--\n drivers/usb/gadget/msm72k_udc.c | 30 ++++++++++++++++---\n drivers/usb/gadget/mv_udc_core.c | 19 +++++++----\n drivers/usb/gadget/net2280.c | 18 ++++++++---\n drivers/usb/gadget/omap_udc.c | 22 +++++++++++---\n drivers/usb/gadget/pch_udc.c | 16 +++++++--\n drivers/usb/gadget/pxa25x_udc.c | 19 ++++++++----\n drivers/usb/gadget/pxa27x_udc.c | 23 ++++++++++----\n drivers/usb/gadget/r8a66597-udc.c | 15 +++++++--\n drivers/usb/gadget/s3c-hsotg.c | 19 +++++++++--\n drivers/usb/gadget/s3c-hsudc.c | 16 +++++++--\n drivers/usb/gadget/s3c2410_udc.c | 29 +++++++++++-------\n drivers/usb/musb/musb_gadget.c | 23 +++++++++++---\n drivers/usb/renesas_usbhs/mod_gadget.c | 20 +++++++++---\n 27 files changed, 411 insertions(+), 141 deletions(-)\n\ncommit 517750424116caaa532ecf06a44d9df87223de4f\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Tue Jun 28 16:33:46 2011 +0300\n\n usb: gadget: introduce UDC Class\n\n this class will be used to abstract away several of the duplicated\n operations scattered among the USB gadget controller drivers.\n\n Later, we can add an atomic notifier to tell interested drivers about\n what\u0027s happening with the controller. Notifications such as suspend,\n resume, enumerated, etc. will be useful, at a minimum, for implementing\n usb charger detection.\n\n As part of the converting process usb_gadget_probe_driver() is no longer\n part of each udc but pushed into the -\u003estap() callback. The same for his\n couterpart.\n\n The core is currently set explicit to \u0027n\u0027. It will be changed to \u0027y\u0027 once\n all users are converted since it provides functions which clash with\n other drivers.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\n Acked-by: Michal Nazarewicz \u003cmina86@mina86.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/gadget/udc-core.c | 418 +++++++++++++++++++++++++++++++++++++++++\n include/linux/usb/gadget.h | 7 +\n 2 files changed, 425 insertions(+), 0 deletions(-)\n\ncommit 9bcc83f456fc3ddf11a4fab4daf649b8a99de8fd\nAuthor: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\nDate: Fri Aug 19 18:10:56 2011 +0300\n\n usb: ch9: add function defines from ch9, USB 3.0 spec\n\n not to confuse with Table 9-7 in USB 2.0 spec\n\n Signed-off-by: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n include/linux/usb/ch9.h | 5 +++++\n 1 files changed, 5 insertions(+), 0 deletions(-)\n\ncommit 0be99a24dbde81c9f808967ad1a0a2ea87f6530f\nAuthor: Paul Gortmaker \u003cpaul.gortmaker@windriver.com\u003e\nDate: Fri Sep 30 18:08:59 2011 -0400\n\n usb: Add module.h to various dwc3 drivers\n\n These files uses the full set of MODULE_ macros and so need to\n include module.h directly.\n\n Signed-off-by: Paul Gortmaker \u003cpaul.gortmaker@windriver.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/core.c | 1 +\n drivers/usb/dwc3/dwc3-omap.c | 1 +\n 2 files changed, 2 insertions(+), 0 deletions(-)\n\ncommit f208a8f461da421f9371b19b8bd00c27f8d0622d\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Fri Sep 30 10:58:51 2011 +0300\n\n usb: dwc3: convert structures into bitshifts\n\n our parameter structures need to be written to\n HW, so instead of assuming little endian, we\n convert those into bit shifts.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/ep0.c | 6 +-\n drivers/usb/dwc3/gadget.c | 40 ++++++-------\n drivers/usb/dwc3/gadget.h | 139 +++++++++------------------------------------\n 3 files changed, 48 insertions(+), 137 deletions(-)\n\ncommit b141b8cd0257ca5e8122310c9ca64af93325e08d\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Fri Sep 30 10:58:50 2011 +0300\n\n usb: dwc3: gadget: allow clock gating to work\n\n The dwc3 core has internal clock gating support.\n\n Let\u0027s allow that to happen by clearing the disable\n bit in GCTL register.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/core.h | 6 ++++++\n drivers/usb/dwc3/gadget.c | 8 ++++++++\n 2 files changed, 14 insertions(+), 0 deletions(-)\n\ncommit b333f87fccf1424b9e7ab8fe8a260b01d865b98d\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Fri Sep 30 10:58:49 2011 +0300\n\n usb: dwc3: core: cache GHWPARAMS* registers\n\n cache the contents of GHWPARAMS* registers in\n our device structure for easy access.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/core.c | 17 +++++++++++++++++\n 1 files changed, 17 insertions(+), 0 deletions(-)\n\ncommit d8e9f2a2f0b5a2d53bcf9b86f886c8b18efc7f41\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Fri Sep 30 10:58:48 2011 +0300\n\n usb: dwc3: add struct dwc3_hwparams\n\n That structure will hold a copy of readonly\n GHWPARAMS* registers for ease accessing by\n the driver.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/core.h | 26 ++++++++++++++++++++++++++\n 1 files changed, 26 insertions(+), 0 deletions(-)\n\ncommit 2aadc55ef7e567258dee0425fb3597c0aee983fe\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Fri Sep 30 10:58:47 2011 +0300\n\n usb: dwc3: gadget: implement streams support\n\n The following patch adds support for streams\n to dwc3 driver.\n\n While at that, also fix one small issue on\n endpoint disable where we should clear all\n flags not only ENABLED.\n\n Reviewied-by: Paul Zimmerman \u003cpaulz@synopsys.com\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n Documentation/usb/dwc3.txt | 8 --------\n drivers/usb/dwc3/core.h | 6 ++++++\n drivers/usb/dwc3/gadget.c | 34 ++++++++++++++++++++++++++++++----\n 3 files changed, 36 insertions(+), 12 deletions(-)\n\ncommit 92366a9b25662e5624ed69f3eec30d31d6560eab\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Fri Sep 30 10:58:46 2011 +0300\n\n usb: dwc3: gadget: add support for Bursts\n\n We already have the value from gadget drivers,\n just need to pass it to our controller.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n [idos@codeaurora.org: Integrate in this commit also the change\n \"USB: use usb_endpoint_maxp() instead of le16_to_cpu()\" 29cc88979a8818cd8c5019426e945aed118b400e\n from Linux kernel 3.1. The reason why this change was not\n cherry-picked separately is because I wanted to reduce impact\n on msm code tree, and only change dwc3 driver.]\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/gadget.c | 4 ++--\n 1 files changed, 2 insertions(+), 2 deletions(-)\n\ncommit 4f5db5cf5b6c982bc1fba8f5711f6aee594850b5\nAuthor: kuninori.morimoto.gx@renesas.com \u003ckuninori.morimoto.gx@renesas.com\u003e\nDate: Mon Jul 25 00:39:30 2011 -0700\n\n usb: add usb_endpoint_maxp() macro\n\n Signed-off-by: Kuninori Morimoto \u003ckuninori.morimoto.gx@renesas.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n [idos@codeaurora.org: use __le16_to_cpu instead of le16_to_cpu]\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n include/linux/usb/ch9.h | 12 ++++++++++++\n 1 files changed, 12 insertions(+), 0 deletions(-)\n\ncommit bba939f019fffedf3261097f02441c25888a5f19\nAuthor: Paul Zimmerman \u003cPaul.Zimmerman@synopsys.com\u003e\nDate: Fri Sep 30 10:58:45 2011 +0300\n\n usb: dwc3: gadget: fix DMA offset calculation\n\n Fix offset calculation in dwc3_trb_dma_offset()\n\n Signed-off-by: Paul Zimmerman \u003cpaulz@synopsys.com\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/gadget.c | 2 +-\n 1 files changed, 1 insertions(+), 1 deletions(-)\n\ncommit 4281539e1dc0a0a2fc2494a1448c4c3ed0e97091\nAuthor: Paul Zimmerman \u003cPaul.Zimmerman@synopsys.com\u003e\nDate: Fri Sep 30 10:58:44 2011 +0300\n\n usb: dwc3: gadget: make DWC3_EP_WEDGE do the right thing\n\n This makes DWC3_EP_WEDGE do the right thing, which is\n prevent DWC3_EP_WEDGE from ever being cleared by a\n ClearFeature(HALT) command.\n\n [ balbi@ti.com : allowed set_wedge to send SetHalt command\n \tto controller ]\n\n Signed-off-by: Paul Zimmerman \u003cpaulz@synopsys.com\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/gadget.c | 6 +++++-\n 1 files changed, 5 insertions(+), 1 deletions(-)\n\ncommit df7a63dc19ab9c48cd396898826ac7d18cafe6e8\nAuthor: Paul Zimmerman \u003cPaul.Zimmerman@synopsys.com\u003e\nDate: Fri Sep 30 10:58:43 2011 +0300\n\n usb: dwc3: gadget: driver should not wait for RxFIFO to drain\n\n An older version of the databook said to wait for the FIFO to\n drain, but that has been removed from the newer databooks.\n\n Waiting for RxFIFO to drain caused problems when testing against\n one of the host controllers available in the market.\n\n After talking to one of the RTL engineers, he stated that we\n should _not_ wait for RxFIFO to drain.\n\n Signed-off-by: Paul Zimmerman \u003cpaulz@synopsys.com\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/gadget.c | 19 -------------------\n 1 files changed, 0 insertions(+), 19 deletions(-)\n\ncommit a6544d0e1c1fee89ada449b5cac658d10571c0c0\nAuthor: Paul Zimmerman \u003cPaul.Zimmerman@synopsys.com\u003e\nDate: Fri Sep 30 10:58:42 2011 +0300\n\n usb: dwc3: gadget: fix DEPSTARTCFG for non-EP0 EPs\n\n DEPSTARTCFG for non-EP0 EPs must only be sent once per config\n\n [ balbi@ti.com : changed config_start to start_config_issued ]\n\n Signed-off-by: Paul Zimmerman \u003cpaulz@synopsys.com\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/core.h | 2 ++\n drivers/usb/dwc3/ep0.c | 1 +\n drivers/usb/dwc3/gadget.c | 10 +++++++++-\n 3 files changed, 12 insertions(+), 1 deletions(-)\n\ncommit 9342a6f8b052198b9c2dc44342c5a25cf378ec19\nAuthor: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\nDate: Fri Sep 30 10:58:41 2011 +0300\n\n usb: dwc: remove \"All rights reserved\" statement.\n\n Some people think that this line is not compatible with the GPL. The\n statement was required due to the Buenos Aires Convention and is now\n deprecated. I remove it because it is said that it is pointless nowdays.\n\n Signed-off-by: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/core.c | 1 -\n drivers/usb/dwc3/core.h | 1 -\n drivers/usb/dwc3/debug.h | 1 -\n drivers/usb/dwc3/debugfs.c | 1 -\n drivers/usb/dwc3/dwc3-omap.c | 1 -\n drivers/usb/dwc3/dwc3-pci.c | 1 -\n drivers/usb/dwc3/ep0.c | 1 -\n drivers/usb/dwc3/gadget.c | 1 -\n drivers/usb/dwc3/gadget.h | 1 -\n drivers/usb/dwc3/io.h | 1 -\n 10 files changed, 0 insertions(+), 10 deletions(-)\n\ncommit f8336a2d5bb2a6484729d77d7ed59bf007ebbba0\nAuthor: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\nDate: Fri Sep 30 10:58:40 2011 +0300\n\n usb: dwc3: ep0: fix debug output\n\n Use \"ep0in\" and \"ep0out\" instead \"ep1in\" and \"ep0out\" which is confusing\n and not consistent with the remaining output.\n\n Signed-off-by: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/ep0.c | 2 +-\n 1 files changed, 1 insertions(+), 1 deletions(-)\n\ncommit 9b580c9667ad75cb534e77456d4ab533631a911c\nAuthor: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\nDate: Fri Sep 30 10:58:39 2011 +0300\n\n usb: dwc3: ep0: remove second giveback in error case\n\n We already give requests back in dwc3_ep0_stall_and_restart() so\n doing it again here will most likely corrupt the list.\n\n Signed-off-by: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/ep0.c | 1 -\n 1 files changed, 0 insertions(+), 1 deletions(-)\n\ncommit b55ee453566dde206108a50e86c5a54c33c38b24\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Fri Sep 30 10:58:38 2011 +0300\n\n usb: dwc3: ep0: fix debug message\n\n The way it was before was really meaningless.\n Now it looks saner.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/ep0.c | 8 ++++----\n 1 files changed, 4 insertions(+), 4 deletions(-)\n\ncommit 0788d7b5e6633b5b04d7fec4be2291e584783786\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Fri Sep 30 10:58:37 2011 +0300\n\n usb: dwc3: ep0: ignore direction on 2-stage transfer\n\n We don\u0027t need to care about direction on a two stage\n transfer.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/ep0.c | 8 ++++----\n 1 files changed, 4 insertions(+), 4 deletions(-)\n\ncommit b7139d3e594a857def16179ceedf9fdf00b0dce4\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Fri Sep 30 10:58:36 2011 +0300\n\n usb: dwc3: ep0: Make USB30CV happy with SetAddress\n\n According to USB 3.0 Specification, a SetAddress()\n while device is in Configured State has an unspecified\n behavior (see Section 9.4.6). Still USB30CV wasn\u0027t\n happy with my Stall reply.\n\n To make that thing happy, just accept the SetAddress()\n always. No problems have been observed thus far.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/ep0.c | 31 +++++++++----------------------\n 1 files changed, 9 insertions(+), 22 deletions(-)\n\ncommit 6edd5bdb3b42293f3dd282246c590243a0818998\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Thu Sep 8 21:18:47 2011 +0300\n\n usb: dwc3: gadget: improve debug on link state change\n\n It\u0027s useful to know which states core is going\n through, as it might help us figure out misbehavior\n on specific link states.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/gadget.c | 4 ++--\n 1 files changed, 2 insertions(+), 2 deletions(-)\n\ncommit 29561f1886df102572aceb2fcde69e98412c786c\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Tue Sep 6 10:56:51 2011 +0300\n\n usb: dwc3: omap: set idle and standby modes\n\n For now, let\u0027s disable IDLE and STANDBY transitions\n until we have a real HW to validate against.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/dwc3-omap.c | 24 ++++++++++++++++++++++++\n 1 files changed, 24 insertions(+), 0 deletions(-)\n\ncommit ecc99439be4d4715a3bca22831210fe799fdef60\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Thu Sep 8 18:27:33 2011 +0300\n\n usb: dwc3: ep0: introduce ep0_expect_in flag\n\n This flag will tell us which direction we\u0027re\n expecting on the next (data or status) phase.\n\n It will help us catching errors of host going\n crazy and requesting data of the wrong direction.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/core.h | 2 ++\n drivers/usb/dwc3/ep0.c | 16 ++++++++++++++++\n 2 files changed, 18 insertions(+), 0 deletions(-)\n\ncommit 4454f03ef05a885d390eeb07decdd6586df55e04\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Thu Sep 8 18:17:12 2011 +0300\n\n usb: dwc3: ep0: giveback requests on stall_and_restart\n\n if we don\u0027t, the list will be busy forever.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/ep0.c | 10 ++++++++++\n 1 files changed, 10 insertions(+), 0 deletions(-)\n\ncommit d3ba9a9d63e8064a1d701d6e94620b01136302d5\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Thu Sep 8 18:16:21 2011 +0300\n\n usb: dwc3: gadget: drop the useless dma_sync_single* calls\n\n if req-\u003edma isn\u0027t DMA_ADDR_INVALID it means gadget driver\n mapped the request or allocated from coherent, so it\u0027s\n unnecessary to do anything.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/gadget.c | 9 ---------\n 1 files changed, 0 insertions(+), 9 deletions(-)\n\ncommit d195b32c82146b30b03546da38dd1e6c296485e6\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Thu Sep 8 17:42:11 2011 +0300\n\n usb: dwc3: gadget: fix GCTL programming\n\n ensure a few bits are cleared before enabling\n what we need.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/gadget.c | 9 +++------\n 1 files changed, 3 insertions(+), 6 deletions(-)\n\ncommit e207db68045eeb022b2ddbe26ae7b937f3c6da28\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Thu Sep 8 17:41:00 2011 +0300\n\n usb: dwc3: define ScaleDown macro helper\n\n We must ensure that those bits aren\u0027t set as\n they should only be used in simulation.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/core.h | 1 +\n 1 files changed, 1 insertions(+), 0 deletions(-)\n\ncommit 18b26f81d37e221d35c5dc07e7cfd65163968ff1\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Thu Sep 8 17:39:59 2011 +0300\n\n usb: dwc3: Fix definition of DWC3_GCTL_U2RSTECN\n\n that should be 1 \u003c\u003c 16, not 16. Caused so many\n problems and we never caught it before.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/core.h | 2 +-\n 1 files changed, 1 insertions(+), 1 deletions(-)\n\ncommit 4ae8e1c5f7fa995661757040cc92a639065eb5ce\nAuthor: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\nDate: Wed Aug 31 17:12:02 2011 +0200\n\n usb: dwc3: gadget: do not map/unmap ZLP transfers\n\n If the gadget drivers sends a ZLP we are trying to map this this request\n which does not work on all implementations. So we simply skip mapping\n it.\n\n Signed-off-by: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/gadget.c | 10 ++++++++++\n 1 files changed, 10 insertions(+), 0 deletions(-)\n\ncommit 5248ed14acde1fcb3b622d59dd630eca652a8e4f\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Tue Sep 6 12:00:39 2011 +0300\n\n usb: dwc3: omap: fix IRQ handling\n\n In order to ACK the IRQ we must write back\n to the same register the bits we read.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/dwc3-omap.c | 39 ++++++++++++---------------------------\n 1 files changed, 12 insertions(+), 27 deletions(-)\n\ncommit 6e8585e672f0372b595557f13cac1017ba335a51\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Tue Sep 6 10:57:41 2011 +0300\n\n usb: dwc3: omap: change IRQ name to dwc3-omap\n\n dwc3-wrapper can be used by any other wrapper,\n using dwc3-omap makes it clear that we\u0027re running\n on OMAP SoC.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/dwc3-omap.c | 2 +-\n 1 files changed, 1 insertions(+), 1 deletions(-)\n\ncommit 8ff9be9a57b3394f4837d6874d0aa12fefd39f40\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Mon Sep 5 13:37:28 2011 +0300\n\n usb: dwc3: add module.h to dwc3-omap.c and core.c\n\n We need that header because of THIS_MODULE.\n\n Reported-by: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/core.c | 1 +\n drivers/usb/dwc3/dwc3-omap.c | 1 +\n 2 files changed, 2 insertions(+), 0 deletions(-)\n\ncommit 6f33e1af1a0540984238637e2c05c081a5c7a0d1\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Thu Sep 1 22:26:25 2011 +0300\n\n usb: dwc3: omap: distinguish between SW and HW modes\n\n The OMAP wrapper allows us to either control internal\n OTG signals via SW or HW. Different boards might wish\n to use one or the other mode of operation. Let\u0027s have\n have that information passed via platform_data for now.\n\n After DT conversion is finished for OMAP, we can easily\n convert this to a DT attribute.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/dwc3-omap.c | 22 ++++++++++++++\n include/linux/platform_data/dwc3-omap.h | 47 +++++++++++++++++++++++++++++++\n 2 files changed, 69 insertions(+), 0 deletions(-)\n\ncommit 201d9a02eef1695e809df15c96156cad44ab6efe\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Thu Sep 1 18:33:43 2011 +0300\n\n usb: dwc3: omap: drop DEV_PM_OPS for now\n\n We need to have actual HW in order to implement\n and test that part of the code anyway. Until then\n it\u0027s best to remove it.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/dwc3-omap.c | 41 -----------------------------------------\n 1 files changed, 0 insertions(+), 41 deletions(-)\n\ncommit c6aa9939cb46ede5b0ac375a2067306e1b590557\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Thu Sep 1 18:22:01 2011 +0300\n\n usb: dwc3: omap: use the macro we already have\n\n trivial patch, no functional changes.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/dwc3-omap.c | 3 ++-\n 1 files changed, 2 insertions(+), 1 deletions(-)\n\ncommit e4b324671d845c82195899cf976aa8eb82552c17\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Thu Sep 1 14:52:52 2011 +0300\n\n usb: dwc3: omap: do not enable DMA Disable Clear IRQ\n\n Otherwise that IRQ will trigger forever. It\u0027s quite\n unnecessary.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/dwc3-omap.c | 3 +--\n 1 files changed, 1 insertions(+), 2 deletions(-)\n\ncommit c93695d156c86dc750b1dd9866ac59177f43f871\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Thu Sep 1 14:46:16 2011 +0300\n\n usb: dwc3: omap: fix dev_dbg() calls\n\n dev_dbg() macro expects a device pointer as\n argument, not a memory base address.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/dwc3-omap.c | 20 ++++++++++----------\n 1 files changed, 10 insertions(+), 10 deletions(-)\n\ncommit 665b9c7f976a2819da2c66adcb80a4db674ace40\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Tue Aug 30 15:52:17 2011 +0300\n\n usb: dwc3: use ep0_next_event field\n\n Start tracking the next expected event and act\n on the error conditions as suggested by databook.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/ep0.c | 40 ++++++++++++++++++++++++++++++++++++----\n 1 files changed, 36 insertions(+), 4 deletions(-)\n\ncommit 4f072fa1d03fc931116a755cc3444a0233c5e049\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Tue Aug 30 15:50:40 2011 +0300\n\n usb: dwc3: core: add ep0_next_event field\n\n this field will hold the next expected event.\n\n In certain cases, host might fall into some error\n condition and ask from us the wrong Control phase.\n On such situations, we should stall and restart.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/core.h | 10 ++++++++++\n 1 files changed, 10 insertions(+), 0 deletions(-)\n\ncommit aa7b4d0d1fe76e8390b64ff20990712e805c56bb\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Tue Aug 30 15:48:08 2011 +0300\n\n usb: dwc3: drop EP0_STALL state\n\n Whenever we issue a Set Stall command on EP0,\n the state machine will be restarted and Stall\n is cleared automatically, when core receives\n the next SETUP packet.\n\n There\u0027s no need to track that EP0_STALL state.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/core.h | 1 -\n drivers/usb/dwc3/ep0.c | 2 --\n drivers/usb/dwc3/gadget.c | 10 ++++++++--\n 3 files changed, 8 insertions(+), 5 deletions(-)\n\ncommit 0054d1193f86f28ef0dcf9de14ba7f4541f119f7\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Tue Aug 30 15:54:53 2011 +0300\n\n usb: dwc3: ep0: clear all EP0 flags\n\n when we\u0027re going to issue Set Stall command,\n we should clear DWC3_EP_STALL flag, but also\n we should clear BUSY, HALTED and all others.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/ep0.c | 2 +-\n 1 files changed, 1 insertions(+), 1 deletions(-)\n\ncommit c0478e0f3958e699fd3eb6e650e1fc9a929b8782\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Wed Aug 31 11:51:43 2011 +0300\n\n usb: dwc3: ep0: fix Get Status handling\n\n data was prepared on setup_buf but transfer\n was started on ctrl_req, fix it.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/ep0.c | 2 +-\n 1 files changed, 1 insertions(+), 1 deletions(-)\n\ncommit 6062cac8e2e17fbaa60d6fd5a73f57bb6d1bda58\nAuthor: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\nDate: Mon Aug 29 16:46:38 2011 +0200\n\n usb: dwc3: gadget: replace mdelay with udelay in the busy loop\n\n There are two spots where we wait until the HW finishes processing a\n certain command. Initially we had a few problems and we used 500ms as a\n limit to be on a the safe side. Paul Zimmerman mentioned this is little too\n much. After a debugging session, we noticed that we hardly ever go over 20us\n and didn\u0027t pass 30usec so far. Using mdelay() seems way overloaded.\n\n Giving the current numbers 500usec as the upper limit is more than enough.\n Should it ever timeout then something is definitely wrong.\n\n While here, also replace the type with u32 since long does not really\n fit here.\n\n Cc: Paul Zimmerman \u003cpaul.zimmerman@synopsys.com\u003e\n Signed-off-by: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/gadget.c | 12 ++++--------\n 1 files changed, 4 insertions(+), 8 deletions(-)\n\ncommit b55db3bb7e3b0b5a21876ad4662d5bab3de3c4e3\nAuthor: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\nDate: Mon Aug 29 13:56:37 2011 +0200\n\n usb: dwc3: gadget: rework the dequeue on RESET \u0026 DISCONNECT\n\n - since a while we are disabling an endpoint and purging every requests on\n RESET and DISCONNECT which leads to a warning since the endpoint was\n disabled twice (once by the UDC, and second time by the gadget). I\n think UDC should nuke all requests because all those requests\n become invalid. It\u0027s gadget driver\u0027s responsability, though, to disable\n its used endpoints. This is done by merging dwc3_stop_active_transfer()\n and dwc3_gadget_nuke_reqs() into dwc3_remove_requests().\n\n - dwc3_stop_active_transfer() is now no longer called unconditionaly.\n This has the advantage that it is always called to disable an active\n transfer which means if res_trans_idx 0 than something went wrong and\n it is an error condition because we can\u0027t clean up the requests.\n\n - Remove the DWC3_EP_WILL_SHUTDOWN which was introduced while\n introducing the command complete part for dequeue. All requests on\n req_queued list should be removed during the dwc3_cleanup_done_reqs()\n callback so there is no reason to go through the list again.\n We consider it an error condition if requests are still on this\n list since we never queue TRB without LST\u003d1 (the last requests has\n always LST\u003d1, there are no requests with LST\u003d0 behind it).\n\n [ balbi@ti.com : reworked commit log a bit, made patch apply ]\n\n Signed-off-by: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/core.h | 1 -\n drivers/usb/dwc3/gadget.c | 31 ++++++++++++-------------------\n 2 files changed, 12 insertions(+), 20 deletions(-)\n\ncommit fe2b0910d566c71110f6c69caf0bac2172e22dc4\nAuthor: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\nDate: Mon Aug 29 13:56:36 2011 +0200\n\n usb: dwc3: core: move the core check before soft reset\n\n We read the DWC3_GSNPSID register to make sure we got the correct\n register offset passed. One of the recent commits moved the soft reset\n before this so in case of the wrong offset we end up with \"reset timed\n out\". This patch moves the \"id\" check before the reset again.\n\n Signed-off-by: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/core.c | 19 +++++++++----------\n 1 files changed, 9 insertions(+), 10 deletions(-)\n\ncommit 9665fdff2c7666fe64e31754a4a42065c5d7b617\nAuthor: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\nDate: Mon Aug 29 13:56:35 2011 +0200\n\n usb: dwc3: debugfs: remove test mode interface\n\n There are some issues around for enabling/disabling this mode and\n handling it. It does not work perfectly (yet). However we have a few\n gadgets tested successfuly so far. That means we are quite confident\n that we won\u0027t need this in near future.\n So I\u0027m for removing it and bringing a working version back once there is\n a need for it.\n\n Thanks to Dan Carpenter who spotted the wrong memory handling here.\n\n [ balbi@ti.com : made it actually apply ]\n\n Cc: Dan Carpenter \u003cerror27@gmail.com\u003e\n Cc: wharms@bfs.de\n Signed-off-by: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/debugfs.c | 94 --------------------------------------------\n 1 files changed, 0 insertions(+), 94 deletions(-)\n\ncommit 32e132e3ea5a1be7e5f5b78e36ead83f4717834e\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Sat Aug 27 22:28:36 2011 +0300\n\n usb: dwc3: ep0: simplify EP0 state machine\n\n The DesignWare USB3 core tells us which phase\n of a control transfer should be started, it\n also tells us which physical endpoint needs\n that transfer.\n\n With these two informations, we have all we\n need to simply EP0 handling quite a lot and\n get rid rid of the SW state machine tracking\n ep0 states.\n\n For achieving this perfectly, we needed to\n add support for situations where we get\n XferNotReady while endpoint is still busy\n and XferNotReady while gadget driver still\n hasn\u0027t queued a request.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/core.h | 12 +-\n drivers/usb/dwc3/ep0.c | 363 ++++++++++++++++++++-------------------------\n drivers/usb/dwc3/gadget.c | 3 +-\n 3 files changed, 163 insertions(+), 215 deletions(-)\n\ncommit edb4e77ef45d3f1dd8c03c0909ca2427493d3bb7\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Sat Aug 27 22:26:00 2011 +0300\n\n usb: dwc3: core: add flag for EP0 direction\n\n Add a flag to keep track of ep0 direction.\n This flag will be used on a following patch.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/core.h | 3 +++\n 1 files changed, 3 insertions(+), 0 deletions(-)\n\ncommit 31d1e803894877aef0e8a1ac57fc7e9e8f3dd258\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Sat Aug 27 22:18:09 2011 +0300\n\n usb: dwc3: ep0: add handling for unaligned OUT transfers\n\n In case we have transfers which aren\u0027t aligned\n to wMaxPacketSize, we need to be careful with\n how we start the transfer with the HW. OUT\n transfers _must_ be aligned with wMaxPacketSize\n and in order to guarantee that, we use a bounce\n buffer.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/ep0.c | 37 ++++++++++++++++++++++++++++++++-----\n 1 files changed, 32 insertions(+), 5 deletions(-)\n\ncommit 64e9634b21ae52e540bdc7008c75733b83ba7a68\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Sat Aug 27 22:07:53 2011 +0300\n\n usb: dwc3: add a bounce buffer for control endpoints\n\n This core cannot handle OUT transfers which aren\u0027t\n aligned to wMaxPacketSize, but that can happen at\n least on control endpoint with the USB Audio Class.\n\n This patch adds a bounce buffer to be used on the\n case of a non-aligned ep0out request is queued.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/core.h | 6 ++++++\n drivers/usb/dwc3/gadget.c | 29 ++++++++++++++++++++++-------\n 2 files changed, 28 insertions(+), 7 deletions(-)\n\ncommit 6cd800e879551945a0e7654bc1b411ea68bc6e11\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Sat Aug 27 22:04:32 2011 +0300\n\n usb: dwc3: core: add defines for XferNotReady event on Control EPs\n\n The status field of the Transfer Not Read event\n is different on Control Endpoints. On this patch\n we are just adding the defines to be used on a\n later patch which will re-work the control endpoint\n handling.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/core.h | 6 ++++++\n 1 files changed, 6 insertions(+), 0 deletions(-)\n\ncommit c7dbe4f213592f8d9c48f1e74c98530ce3ab58db\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Sat Aug 27 20:29:58 2011 +0300\n\n usb: dwc3: gadget: improve command completion debug message\n\n the previous message had too little meaning. Make\n it more human readable and use the macro we already\n had for extracting the command completion status out\n of DEPCMDn register.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/gadget.c | 4 ++--\n 1 files changed, 2 insertions(+), 2 deletions(-)\n\ncommit 162e128db0515efff3953023caf8c04000b33150\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Sat Aug 27 15:10:09 2011 +0300\n\n usb: dwc3: gadget: set request dma to invalid when unmapping\n\n if we don\u0027t set DMA address to invalid when unmapping,\n we might fall in a situation where request buffer\n can\u0027t be mapped to DMA again.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/gadget.c | 1 +\n 1 files changed, 1 insertions(+), 0 deletions(-)\n\ncommit ff4e987bcfc047891b19d0c184a0b570e79ba16e\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Sat Aug 27 02:30:33 2011 +0300\n\n usb: dwc3: ep0: fix \u0027transfered\u0027 typo\n\n trivial patch. No functional changes.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/ep0.c | 6 +++---\n 1 files changed, 3 insertions(+), 3 deletions(-)\n\ncommit 7a769ecc904247c5b4bf473a05211fbf9572547f\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Sat Aug 27 01:40:52 2011 +0300\n\n usb: dwc3: core: add missing @ for kerneldoc\n\n trivial patch, no functional changes\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/core.h | 14 +++++++-------\n 1 files changed, 7 insertions(+), 7 deletions(-)\n\ncommit e918b57dc8c9b823e3de2077f9dc76fb7d5c15fd\nAuthor: Dan Carpenter \u003cerror27@gmail.com\u003e\nDate: Fri Aug 26 12:21:13 2011 +0300\n\n usb: dwc3: debugfs: add a kfree() on error to dwc3_testmode_open()\n\n We may as well fix this potential leak so we don\u0027t have to listen to\n the static checkers complain.\n\n Signed-off-by: Dan Carpenter \u003cerror27@gmail.com\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/debugfs.c | 4 +++-\n 1 files changed, 3 insertions(+), 1 deletions(-)\n\ncommit b31b612847e208f2e0148d9796e333e63ebc011f\nAuthor: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\nDate: Mon Aug 22 18:29:13 2011 +0200\n\n usb: dwc3: gaget: clear DWC3_EP_WILL_SHUTDOWN bit\n\n Without this patch we won\u0027t clear that bit and instead will\n clear all other bits on our endpoint flag.\n\n Signed-off-by: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/gadget.c | 2 +-\n 1 files changed, 1 insertions(+), 1 deletions(-)\n\ncommit 15623d7087ee986a9fad5085580308e557dcc71e\nAuthor: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\nDate: Mon Aug 22 17:42:19 2011 +0200\n\n usb: dwc3: gadget: use TRB type 6 for ISOC transfers\n\n Type 6 should be used for the first transfer during an interval. This is\n also what the reference driver is using. Type 7 seems to be for following\n or additional transfers within the same interval.\n\n Signed-off-by: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/gadget.c | 2 +-\n 1 files changed, 1 insertions(+), 1 deletions(-)\n\ncommit 4df3977d9f2042973559387e4f3c91d77b5fc2ff\nAuthor: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\nDate: Mon Aug 22 17:42:18 2011 +0200\n\n usb: dwc3: gadget: reset resource index to zero\n\n If we collected two requests together (i.e. only the last of them has\n LST\u003d1) then we only have to stop transfer once: The clean-up code will\n cleanup everything until first TRB with the LST bit set.\n After XferComplete this index should be no longer valid since there is\n no transfer pending.\n\n Signed-off-by: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/gadget.c | 5 ++++-\n 1 files changed, 4 insertions(+), 1 deletions(-)\n\ncommit 679dc466377c74b551ac56d91f9cb6077f4adbe2\nAuthor: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\nDate: Fri Aug 19 19:59:12 2011 +0200\n\n usb: dwc3: gadget: fixing dequeue of TRBs\n\n A TRB which is dequeued seems to have its HWO bits set to 1. Therefore\n we ignore it if we dequeue it after the command is completed.\n\n Signed-off-by: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/gadget.c | 12 +++++++++---\n 1 files changed, 9 insertions(+), 3 deletions(-)\n\ncommit d9a09a239efb6f13e93355d8a2d23be9a9baf919\nAuthor: Randy Dunlap \u003crdunlap@xenotime.net\u003e\nDate: Tue Aug 23 12:52:47 2011 -0700\n\n usb: fix dwc3 build when USB_GADGET_DWC3 is not enabled\n\n Fix build error when CONFIG_USB_GADGET_DWC3 is not enabled:\n\n ERROR: \"dwc3_send_gadget_ep_cmd\" [drivers/usb/dwc3/dwc3.ko] undefined!\n\n Signed-off-by: Randy Dunlap \u003crdunlap@xenotime.net\u003e\n Acked-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/gadget.h | 5 +++++\n 1 files changed, 5 insertions(+), 0 deletions(-)\n\ncommit faea001704b7bd0f56f31a358b608c5b9db8a5e6\nAuthor: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\nDate: Tue Aug 23 15:08:54 2011 +1000\n\n usb: include module.h in the DesignWare USB3 DRD driver\n\n Fixes this build error:\n\n drivers/usb/dwc3/dwc3-pci.c: In function \u0027dwc3_pci_init\u0027:\n drivers/usb/dwc3/dwc3-pci.c:211:9: error: \u0027THIS_MODULE\u0027 undeclared (first use in this function)\n\n Signed-off-by: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\n Acked-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/dwc3/dwc3-pci.c | 1 +\n 1 files changed, 1 insertions(+), 0 deletions(-)\n\ncommit 4dc64e52bd65dc96a240d677340853ecf4feb243\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Fri Aug 19 18:10:58 2011 +0300\n\n usb: dwc3: Introduce DesignWare USB3 DRD Driver\n\n The DesignWare USB3 is a highly\n configurable IP Core which can be\n instantiated as Dual-Role Device (DRD),\n Peripheral Only and Host Only (XHCI)\n configurations.\n\n Several other parameters can be configured\n like amount of FIFO space, amount of TX and\n RX endpoints, amount of Host Interrupters,\n etc.\n\n The current driver has been validated with\n a virtual model of version 1.73a of that core\n and with an FPGA burned with version 1.83a\n of the DRD core. We have support for PCIe\n bus, which is used on FPGA prototyping, and\n for the OMAP5, more adaptation (or glue)\n layers can be easily added and the driver\n is half prepared to handle any possible\n configuration the HW engineer has chosen\n considering we have the information on\n one of the GHWPARAMS registers to do\n runtime checking of certain features.\n\n More runtime checks can, and should, be added\n in order to make this driver even more flexible\n with regards to number of endpoints, FIFO sizes,\n transfer types, etc.\n\n While this supports only the device side, for\n now, we will add support for Host side (xHCI -\n see the updated series Sebastian has sent [1])\n and OTG after we have it all stabilized.\n\n [1] http://marc.info/?l\u003dlinux-usb\u0026m\u003d131341992020339\u0026w\u003d2\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n [idos@codeaurora.org: gadget_chips.h: Use \u0027gadget_is_dwc3(g)\u0027 only if\n CONFIG_USB_GADGET_DWC3 is defined.]\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n Documentation/usb/dwc3.txt | 53 +\n drivers/usb/Kconfig | 2 +\n drivers/usb/Makefile | 2 +\n drivers/usb/dwc3/Kconfig | 25 +\n drivers/usb/dwc3/Makefile | 36 +\n drivers/usb/dwc3/core.c | 467 +++++++++\n drivers/usb/dwc3/core.h | 709 +++++++++++++\n drivers/usb/dwc3/debug.h | 51 +\n drivers/usb/dwc3/debugfs.c | 534 ++++++++++\n drivers/usb/dwc3/dwc3-omap.c | 410 ++++++++\n drivers/usb/dwc3/dwc3-pci.c | 219 ++++\n drivers/usb/dwc3/ep0.c | 782 ++++++++++++++\n drivers/usb/dwc3/gadget.c | 2063 +++++++++++++++++++++++++++++++++++++\n drivers/usb/dwc3/gadget.h | 292 ++++++\n drivers/usb/dwc3/io.h | 55 +\n drivers/usb/gadget/Kconfig | 12 +\n drivers/usb/gadget/gadget_chips.h | 4 +\n 17 files changed, 5716 insertions(+), 0 deletions(-)\n\ncommit 348a4c20384e2956a76fa5522fcf8a4827d27120\nAuthor: Felipe Balbi \u003cbalbi@ti.com\u003e\nDate: Fri Aug 19 18:10:57 2011 +0300\n\n usb: gadget: introduce gadget_is_dwc3()\n\n ... to check whether we\u0027re running on DesignWare\n USB3 DRD Controller.\n\n Signed-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n Signed-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n [idos@codeaurora.org: Conflicts: gadget_chips.h]\n Signed-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n\n drivers/usb/gadget/gadget_chips.h | 4 ++++\n 1 files changed, 4 insertions(+), 0 deletions(-)\n\nChange-Id: I12d5f2f957d39b2ff8031366994689bcd453f213\nSigned-off-by: David Brown \u003cdavidb@codeaurora.org\u003e\n" }, { "commit": "96dba80e27b3a559e5581ecf312501a55e59fb6b", "tree": "f2c49a4f8cc7d317f201466f33e40b9dc493affd", "parents": [ "1896e08b4b10fc833126b710197ec604e0dda789", "7a05bd74846af780f2af056c022ebfb6f51dfcca" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Mar 09 06:37:01 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Mar 09 06:37:01 2012 -0800" }, "message": "Merge \"pm8xxx: Remove __exit marking on pm8xxx_irq_exit()\" into msm-3.0" }, { "commit": "1b5c1a0c12f40dbfbabce7776ebe1c32ee6d08c5", "tree": "01896cfaf13e0bea84f37752a8e176ab30591e17", "parents": [ "2532b10c59b578f446a0da8d9acbc6d83c19ec85", "b4618a48b8bcf54b2711cd54156f6109016dc582" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Mar 09 04:27:05 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Mar 09 04:27:05 2012 -0800" }, "message": "Merge \"diag: Add diag support for new 8625 and 8974 targets\" into msm-3.0" }, { "commit": "7d47fb3039b0c3749a50f71295c451cd7a0e7b9c", "tree": "062f5f89f23243cf8c1313ca3c7b91bf89a9cc0e", "parents": [ "6c43d7bb9f2aacd4455776ab9c17d00a1c8eb7d2", "9d3eeff5f2c785261601a71b7c80a4ca8ea758c1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Mar 08 20:43:43 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Mar 08 20:43:43 2012 -0800" }, "message": "Merge changes I2004acea,I528fd9c2,If52eab15 into msm-3.0\n\n* changes:\n mmc: core: hs200 fixes\n mmc: core: Fix low speed mmc card detection failure\n mmc: core: HS200 mode support for eMMC 4.5\n" }, { "commit": "7cab0c9f9a8b09f4092e43012a56caa004ac836a", "tree": "6b799744298e9e44683be71419f925674e0e02a6", "parents": [ "34beae499cd325c0bf668c3bc6cdb74e5ddae02a", "1720db8438f77ecde8e381c98bd064283b6c5c83" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Mar 08 20:43:42 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Mar 08 20:43:43 2012 -0800" }, "message": "Merge \"USB: core: Add support for OTG automated compliance tests\" into msm-3.0" }, { "commit": "b4618a48b8bcf54b2711cd54156f6109016dc582", "tree": "3937ca19876ec3369bd2bd687a809612eeb33692", "parents": [ "37c733d885483a157a9523e60434ce699ecc0d4e" ], "author": { "name": "Dixon Peterson", "email": "dixonp@codeaurora.org", "time": "Wed Feb 29 18:56:31 2012 -0800" }, "committer": { "name": "Dixon Peterson", "email": "dixonp@codeaurora.org", "time": "Thu Mar 08 12:28:23 2012 -0800" }, "message": "diag: Add diag support for new 8625 and 8974 targets\n\nAlso, add more generic cpu type identification logic\nto remove having to modify code each time a new target\nvariant comes out.\n\nChange-Id: I9493ffad0960ab4863205191937ea5c56be97de2\nSigned-off-by: Dixon Peterson \u003cdixonp@codeaurora.org\u003e\n" }, { "commit": "7a05bd74846af780f2af056c022ebfb6f51dfcca", "tree": "efb1edcba52edc7f8bf7b7e5a7a7e3467a6d0650", "parents": [ "37c733d885483a157a9523e60434ce699ecc0d4e" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Tue Feb 21 01:18:46 2012 -0800" }, "committer": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Thu Mar 08 12:04:23 2012 -0800" }, "message": "pm8xxx: Remove __exit marking on pm8xxx_irq_exit()\n\nThis function is called from more places than just exit\nfunctions. Also remove the _init/__exit markings from the header\nfile as they\u0027re not necessary in function prototypes.\n\nWARNING: vmlinux.o(.devinit.text+0x7840): Section mismatch in\nreference from the function pm8038_add_subdevices() to the\nfunction .devexit.text:pm8xxx_irq_exit()\nThe function __devinit pm8038_add_subdevices() references\na function __devexit pm8xxx_irq_exit().\nThis is often seen when error handling in the init function\nuses functionality in the exit path.\nThe fix is often to remove the __devexit annotation of\npm8xxx_irq_exit() so it may be used outside an exit section.\n\nChange-Id: I0d2e285a03958e0fe68af48df94523aa1d0476c0\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "5692535d5b8c46d933d6ba1417dcc7d2c3b1820a", "tree": "7d0077b0d3a7a1b25a3a3c50a52d1c7d6a4f08dc", "parents": [ "37c733d885483a157a9523e60434ce699ecc0d4e" ], "author": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Mon Feb 13 16:59:52 2012 -0800" }, "committer": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Thu Mar 08 09:39:16 2012 -0800" }, "message": "USB: EHCI: Add support to detect docking station connection and removal\n\nThis change implements the docking station detection by reading the status\nof MPP9 on PMIC8921. With this change VREG_5V(USB port 3 VBUS) is turned on\nonly when docking station is connected to Liquid platform in order to save\npower.\n\nChange-Id: I4282b4273adabf8aeaf8faad43cd2cfff36eeac6\nSigned-off-by: Hemant Kumar \u003chemantk@codeaurora.org\u003e\n" }, { "commit": "d069375638e77064821440b54d73c212df9cd2ca", "tree": "1e71053ece18a0d83e4240e6ecad06dd1cc48f09", "parents": [ "1713486251c7651a28677df0b6cfae292a990e45", "321c8b53cbe35e4551b8934deec4f7bb659c4f83" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Mar 08 06:20:55 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Mar 08 06:20:55 2012 -0800" }, "message": "Merge \"diag: Propagate mask info to slave processor\" into msm-3.0" }, { "commit": "c4370f174b8a119bcd8bab90de38367f21157202", "tree": "1fc866e8f75fcb4eb322dc5da99b82b5b436b5fe", "parents": [ "167738c9f8de13232e1c54ad29f56b352333daf0", "0f8ade328b117d45c42f21fda7ef53b11dc933c7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 07 23:37:05 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 07 23:37:05 2012 -0800" }, "message": "Merge \"ASoC: wcd9310: Add the compander support to wcd9310\" into msm-3.0" }, { "commit": "a3f4169e473cd1722a840dc6a4c40daa40653648", "tree": "ebfbe81c930c4d0a8af9052fec9a28e73019408a", "parents": [ "b2b85fddd2225d95b7da5daa3d9fad3c2bb01dfb" ], "author": { "name": "Girish K S", "email": "girish.shivananjappa@linaro.org", "time": "Wed Feb 29 12:00:09 2012 +0530" }, "committer": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Thu Mar 08 12:13:44 2012 +0530" }, "message": "mmc: core: HS200 mode support for eMMC 4.5\n\nThis patch adds the support of the HS200 bus speed for eMMC 4.5 devices.\nThe eMMC 4.5 devices have support for 200MHz bus speed. The function\nprototype of the tuning function is modified to handle the tuning\ncommand number which is different in sd and mmc case.\n\nChange-Id: If52eab150592d96adb58d98ec19110fe43d2fbc0\nSigned-off-by: Girish K S \u003cgirish.shivananjappa@linaro.org\u003e\nSigned-off-by: Philip Rakity \u003cprakity@marvell.com\u003e\nSigned-off-by: Chris Ball \u003ccjb@laptop.org\u003e\n[subhashj@codeaurora.org: Fixed merge conflicts and compilation errors]\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "c4bb1f9623180bf89837c13ed2eccc3aa7e208cd", "tree": "18e95d7c16a7440d1d9ea40703f4b86ac2fab2d6", "parents": [ "bbd69208f64d878107b238d93a0e50d77eef17ec", "6c3b37b263b0b86925b9c790a644962f9353b22c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 07 21:33:57 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 07 21:33:58 2012 -0800" }, "message": "Merge \"Input: atmel-mxt_ts: Support firmware upgrade in bootloader mode\" into msm-3.0" }, { "commit": "bbd69208f64d878107b238d93a0e50d77eef17ec", "tree": "d8feb58c7e178a2731d370c2c0b27bdb16e69d92", "parents": [ "6287d23fb44d18679a7669e1462ef505a7379ad6", "94626402db72f77ee6241cf69c3ec584c39951da" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 07 21:33:57 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 07 21:33:58 2012 -0800" }, "message": "Merge \"msm: vidc: add slice info extradata feature for encoder\" into msm-3.0" } ], "next": "6287d23fb44d18679a7669e1462ef505a7379ad6" }