)]}' { "log": [ { "commit": "61ba869ccd7345f2c36a286c30f5cf23c82789a9", "tree": "56f8686710cf7e22f6b532c93078b8d23852e865", "parents": [ "bad9401e800b75e50b79656387340a07e2f1a598", "e6b77622bb24ab64117564052000b95dc4618231" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 20:32:16 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 20:32:16 2012 -0700" }, "message": "Merge \"msm: kgsl: Dump the entire ringbuffer to the snapshot\" into msm-3.0" }, { "commit": "bad9401e800b75e50b79656387340a07e2f1a598", "tree": "396d0a0515171461e3c703554f745c7e4ddc0a32", "parents": [ "fb1db2cd54129f3b77e087ed209ddcf9f494dfc1", "c9559e461e3df1b828218421430a38c9d7a38ca4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 20:32:15 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 20:32:15 2012 -0700" }, "message": "Merge \"msm: kgsl: Store process mem entries in a rbtree\" into msm-3.0" }, { "commit": "fb1db2cd54129f3b77e087ed209ddcf9f494dfc1", "tree": "a8e49a2f673fb8feb8ef8d07fd479ba2ffcf7e20", "parents": [ "e949b1a002b3b50e0773d7d58fedde5cf1b60fde", "b37fea4fc54f82ee9f04d5f709c5e5c7e29e3a38" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 20:32:10 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 20:32:10 2012 -0700" }, "message": "Merge \"msm: clock: Make sure clock parents are set before handoff\" into msm-3.0" }, { "commit": "e949b1a002b3b50e0773d7d58fedde5cf1b60fde", "tree": "04badfca53ba5ed4163a77dbcba5ab772e3873ca", "parents": [ "9343b215c1b48e1fcda923e7055f0c363087020e", "84fdb11109b6de75ef6fdee324618b268caf7a6e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 20:32:09 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 20:32:09 2012 -0700" }, "message": "Merge \"msm: kgsl: Create a separate pool for mapping kgsl allocations\" into msm-3.0" }, { "commit": "9343b215c1b48e1fcda923e7055f0c363087020e", "tree": "33db2d56065aa0c0da6db13fd9cc78de5016c913", "parents": [ "b5380b64e4067946b0963150762ddcb2a0cd80c7", "d23ff4bb47c017afb17fb43f176a2867d4cc53fa" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 20:32:06 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 20:32:06 2012 -0700" }, "message": "Merge \"msm: kgsl: Add markers to identify IB sequence start and end\" into msm-3.0" }, { "commit": "b5380b64e4067946b0963150762ddcb2a0cd80c7", "tree": "9f14c97efa2f191b91927d87f29f37dcc64f4d18", "parents": [ "ff6c23d9206e2d0e5a0344f4b237a20ec1ad2d77", "30df049da9f2b71dd5e572615f126939c6ec7b90" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 18:49:34 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 18:49:34 2012 -0700" }, "message": "Merge \"ASoC: msm: Fix NULL pointer dereference issue.\" into msm-3.0" }, { "commit": "ff6c23d9206e2d0e5a0344f4b237a20ec1ad2d77", "tree": "3a6256323992d85325dcaea2941091764486d466", "parents": [ "609d1b9502a750611d6a018b74ec40410fd1e6fa", "6e73f0a25171e3e5d2d520da99a02f74c5646592" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 18:49:31 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 18:49:31 2012 -0700" }, "message": "Merge \"msm: Display: Add support for backlight control on 8930 chipset.\" into msm-3.0" }, { "commit": "609d1b9502a750611d6a018b74ec40410fd1e6fa", "tree": "6389620386808f01de09c88f2d3a3a65c57fd60b", "parents": [ "71ebe3dd29ca3525cde4cbc39ca6c7d710157803", "b7092f171812c0d1948708b8cc6d5bd18ea76432" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 18:49:27 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 18:49:27 2012 -0700" }, "message": "Merge changes I27832682,I0bd93951 into msm-3.0\n\n* changes:\n power: pm8921-bms: calibrate ocv only when it changes\n power: pm8921-bms: approach fcc if outside the scope\n" }, { "commit": "71ebe3dd29ca3525cde4cbc39ca6c7d710157803", "tree": "0465164bf1ea45caa8de88240c36411ff42783ac", "parents": [ "bb1ed5ec370e48381270238ee1563bc7daa6578b", "9aa962694140cd706b844583d7c3e102fbfe82ad" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 18:49:21 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 18:49:21 2012 -0700" }, "message": "Merge \"msm: msm_bus: Avoid exceeding allocated buffer space in debugfs\" into msm-3.0" }, { "commit": "bb1ed5ec370e48381270238ee1563bc7daa6578b", "tree": "2235ff95e238e0e4a32c3a8051932f7c52ee7126", "parents": [ "932410e2e01c52108e6d8e1df3b6c3db135f3205", "f6fdcaa0ca320e7b8c19e5edd343629c94e9cdb0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 18:49:18 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 18:49:18 2012 -0700" }, "message": "Merge \"power: pm8921-bms: scale rbatt with temperature and soc\" into msm-3.0" }, { "commit": "932410e2e01c52108e6d8e1df3b6c3db135f3205", "tree": "b531490c2e7db788f6500cb0fe470414a4ed7275", "parents": [ "e233d5a456662afb8a6a7e31297f067aa7700827", "beb23f51c9e671bee63eec2f1ea8e807124e2952" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 18:49:17 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 18:49:17 2012 -0700" }, "message": "Merge \"msm: acpuclock-7x30: Prepare PLLs during init\" into msm-3.0" }, { "commit": "e233d5a456662afb8a6a7e31297f067aa7700827", "tree": "cea0de8ee2f4e549da44868821bcf3e6136f8bc3", "parents": [ "707e40c4261919b8051767cb6d6b1b8020cf9ed2", "194a4b5f555559b0e0eac003634b3e31c278141b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 18:49:14 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 18:49:14 2012 -0700" }, "message": "Merge \"msm: board-8930: Add LED trigger for Backlight control.\" into msm-3.0" }, { "commit": "707e40c4261919b8051767cb6d6b1b8020cf9ed2", "tree": "5416341b435c3fdda443ff0143897aa91a11bdc9", "parents": [ "e046df9b6f8fbcc594c9b5a2c643ac56eee3e922", "d89c0e7712dd5cf13769b4d0facfecb93028538c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 18:49:12 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 18:49:12 2012 -0700" }, "message": "Merge \"video: msm: Load correct default values to QSEED at init\" into msm-3.0" }, { "commit": "e046df9b6f8fbcc594c9b5a2c643ac56eee3e922", "tree": "22d5d6d59e8bb5b1c0b3d4d38f78ada334255f0d", "parents": [ "9ab25c05f4045b84ed0fbe77e7a55a2f51bff6bf", "27d3f533fa45ab9b86cc684cd1e3f407090072c8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 18:49:08 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 18:49:08 2012 -0700" }, "message": "Merge \"wcnss: fix enable wcnss bite IRQ warning\" into msm-3.0" }, { "commit": "9ab25c05f4045b84ed0fbe77e7a55a2f51bff6bf", "tree": "46ef34987d6bc28c150d95633daac5e50dd6ba01", "parents": [ "b3b6116905e1f74f3d3b66e916f4e134b6129603", "de2e46631ceb85cbe27c35fae3b724402242a7a4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 15:03:10 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 15:03:10 2012 -0700" }, "message": "Merge \"misc: pmic8058-xoadc: Fix section mismatches\" into msm-3.0" }, { "commit": "b3b6116905e1f74f3d3b66e916f4e134b6129603", "tree": "510feff7749d338a58aaac4b6eaa44057fcc9a90", "parents": [ "3f9660c7a32165155bff9ca5963869a3bd240d25", "b137163557177643787363e055d6b5d02f3b917a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 15:03:08 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 15:03:08 2012 -0700" }, "message": "Merge \"defconfig: msm8960: Enable dumping the caches on panic\" into msm-3.0" }, { "commit": "3f9660c7a32165155bff9ca5963869a3bd240d25", "tree": "469e8df913d4084e26121f92372d4e866711ec26", "parents": [ "fbfc92e38cbb87032f473e26c2a4c1b8133b54ca", "a8417e6c445ac8f1b27d9d24edb32bd5d14e9fd0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 15:03:07 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 15:03:07 2012 -0700" }, "message": "Merge \"Bluetooth: Ensure socket pointer is set during callback\" into msm-3.0" }, { "commit": "fbfc92e38cbb87032f473e26c2a4c1b8133b54ca", "tree": "53f4f03cf1dad7f3e5b0aa548ea601ab2b87efe1", "parents": [ "f35ec4f77970567f718473327b203cdae043972d", "1c20e3fbd5f9780ab28c44fec635ec4eb05a452f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 15:03:05 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 15:03:05 2012 -0700" }, "message": "Merge \"usb: diag: Avoid NULL pointer dereference in debugfs\" into msm-3.0" }, { "commit": "f35ec4f77970567f718473327b203cdae043972d", "tree": "cac1e3355392cfa379b2ba8942e281365befb64b", "parents": [ "143dbf1cf6392624bbfdde6e18c7fb1246614f59", "6e36241ec29f65161c752597e61a60f9b7e9e972" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 15:03:04 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 15:03:04 2012 -0700" }, "message": "Merge \"msm: kgsl: Add a pwrscale policy to interact with msm_dcvs\" into msm-3.0" }, { "commit": "143dbf1cf6392624bbfdde6e18c7fb1246614f59", "tree": "84e74c5aafeef14c71d0d076587de9955ab16e1a", "parents": [ "2176ce7f5b467970ad881e23a510d0257ec40446", "7b63736cd68dac64b889f18d3e9cfa037e12e076" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 15:03:01 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 15:03:01 2012 -0700" }, "message": "Merge \"msm: Add support to dump the caches on panic\" into msm-3.0" }, { "commit": "2176ce7f5b467970ad881e23a510d0257ec40446", "tree": "212e247754a1b0a9547e7910ae82128127e57286", "parents": [ "d9b6dc9628e324672aa2667edb0c3aa2acb56a94", "9d69ac3817052aaab388eb1c1212285ddc63932b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 15:03:00 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 15:03:00 2012 -0700" }, "message": "Merge \"msm: copper: Add target specific dts files\" into msm-3.0" }, { "commit": "d9b6dc9628e324672aa2667edb0c3aa2acb56a94", "tree": "73881bdbfbf3ecf2a6b59ec407cf8aea5ffbd773", "parents": [ "18b09bb903fb84dd325a11cf0563284f18de92c7", "630bd147580b420f296a7e00c28147f5b4db7feb" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 15:02:59 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 15:02:59 2012 -0700" }, "message": "Merge \"msm:board: Remove HSIC related configuration for 8930\" into msm-3.0" }, { "commit": "18b09bb903fb84dd325a11cf0563284f18de92c7", "tree": "7424e193130a706adcb320de7bd02ecf8426c2fc", "parents": [ "681fb18e0a798be3df56d43840d2dc08f47c98e5", "4eb6b3cbf9555598ae44f16a18655fc4c94ea3ac" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 13:09:05 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 13:09:05 2012 -0700" }, "message": "Merge \"msm: rpm_resources.c: Compare sleep time with idle state overhead time\" into msm-3.0" }, { "commit": "681fb18e0a798be3df56d43840d2dc08f47c98e5", "tree": "11c0a21d11ef2e9f11461786f2618ec2ebe561f4", "parents": [ "c63fa69f472ee54aa2d257bdf61d9cca3d8d2ec9", "a48794b4ab9c8dd94f12e92378a03ab9fc9675ab" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 13:09:00 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 13:09:00 2012 -0700" }, "message": "Merge \"msm: 9615: Add display support to board file\" into msm-3.0" }, { "commit": "c63fa69f472ee54aa2d257bdf61d9cca3d8d2ec9", "tree": "f9685a56f381e60909df67d5a4a10d69a53a7d35", "parents": [ "01540e9ee269040fb9c98c87433cd84310deed59", "2bec977ed3fd82a0ac7fa24549e084299e90b38a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 13:08:55 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 13:08:55 2012 -0700" }, "message": "Merge \"msm: bam_dmux: send ack to A2 for 9615 fallback\" into msm-3.0" }, { "commit": "01540e9ee269040fb9c98c87433cd84310deed59", "tree": "357a4bbbf70e91d95824ff31ba1e092412877b56", "parents": [ "6ee058d5a45a9aace53a22d9d6a7ea70b676eada", "e1482bf13da12ea4710c9f2a26f27a070337f272" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 13:08:50 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 13:08:50 2012 -0700" }, "message": "Merge \"msm: Consolidate set-up of \u0027children\u0027 lists in msm_clock_init()\" into msm-3.0" }, { "commit": "6ee058d5a45a9aace53a22d9d6a7ea70b676eada", "tree": "fc47f2d17c2c8c9e3e96c35918d9957c2a66b5df", "parents": [ "f3ea7eb32fa51fe1bcd8546c66c8bbf3779ba670", "e72c45dfc478b46ac3019ba1cece6b8c0116f110" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 13:08:44 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 13:08:44 2012 -0700" }, "message": "Merge \"msm: rpm: Replace mutex_lock_interruptible with mutex_lock\" into msm-3.0" }, { "commit": "f3ea7eb32fa51fe1bcd8546c66c8bbf3779ba670", "tree": "0f79dd2f0af27ebe37346b045af5425cca859681", "parents": [ "34d391a6bd6f16cd7f588af50844122e8de0ee3a", "f0bd4cd4ca4114298fba41f18db9babe0533e075" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 13:08:41 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 13:08:41 2012 -0700" }, "message": "Merge \"msm_fb: display: Epson ebi2 panel support\" into msm-3.0" }, { "commit": "34d391a6bd6f16cd7f588af50844122e8de0ee3a", "tree": "a7b99e10ebb536eb37d01aae93b2a850ae5cff97", "parents": [ "a8f74d3406a91f412ad5d2852ef2bb6c7495a39f", "c8357a905d6f17d9c6f7d03da33efa76224504b7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 13:08:36 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 13:08:36 2012 -0700" }, "message": "Merge \"msm: msm_xo: Fix scheduling while atomic bug\" into msm-3.0" }, { "commit": "a8f74d3406a91f412ad5d2852ef2bb6c7495a39f", "tree": "791f27be4ef81a2ef897f4596e72d234801bb5c1", "parents": [ "ea3627d09ec855cce3103ac7ba31a4f5f8caff0b", "8c9dc3869a211955d0d42b555d09f5cdeb602f4f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 13:08:29 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 13:08:29 2012 -0700" }, "message": "Merge changes Iee617e53,Iebf4c9e4,I4b6de87e into msm-3.0\n\n* changes:\n msm: clock: Move lateinit clock handoff code out of SKIP_AUTO_OFF check\n msm: clock: Clean up handoff function return values\n msm: clock: Split up struct clock_init_data\u0027s init() functions\n" }, { "commit": "ea3627d09ec855cce3103ac7ba31a4f5f8caff0b", "tree": "9868bcab1620c86719d238594ba8f1301c3cdddd", "parents": [ "2c8d31b22c05ef9a42452e2939aaf7b2905df45a", "a74acd6bd1cc2338d1a55ce46ac988c6a9b8e200" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 13:08:22 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 13:08:22 2012 -0700" }, "message": "Merge \"msm: pil-riva: Simplify and fix CXO voting\" into msm-3.0" }, { "commit": "2c8d31b22c05ef9a42452e2939aaf7b2905df45a", "tree": "6354ef2666d95e20d45abd8802cc0edf3d07286f", "parents": [ "abee3f9128d543557cf2a6c93e8248238afd1fc6", "c504cbb92e46a8689fae205b702e39ba9fad950a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 13:08:15 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 13:08:15 2012 -0700" }, "message": "Merge \"defconfig: 9615: allow both hsic and usb to compile as modules.\" into msm-3.0" }, { "commit": "abee3f9128d543557cf2a6c93e8248238afd1fc6", "tree": "bafa9a31d0b34d3fa89a8bf7ae9f162e17bd615b", "parents": [ "af6ebab769dce5ca4a35c1dba61a5f46ed91c6c7", "c2f2bcc792b95b102e546680cecc6f750d764bd9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 11:00:57 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 11:00:57 2012 -0700" }, "message": "Merge \"msm: 9615: Add ebi2 lcd device support to device file\" into msm-3.0" }, { "commit": "af6ebab769dce5ca4a35c1dba61a5f46ed91c6c7", "tree": "65db3074b3c37bf8aa1b4a41557fb6a022c78c2c", "parents": [ "5b21e6f5be11a80063164597fb20e0bd0c326bd1", "38ad6e103486a370f29dc2625dd59cc7a2162baa" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 11:00:55 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 11:00:55 2012 -0700" }, "message": "Merge \"msm: board-msm7x27a: Increase Idle timeout\" into msm-3.0" }, { "commit": "5b21e6f5be11a80063164597fb20e0bd0c326bd1", "tree": "209151558cdf8248a5b1bcea6ded6d51b1b0ef48", "parents": [ "33822d87a0156168a1793c9d91c469182a11d5f8", "69177e1fe879558a034de8a75a1a4a33e3e428c1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 11:00:53 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 11:00:53 2012 -0700" }, "message": "Merge changes I6adaaed0,I2e4ab2bc into msm-3.0\n\n* changes:\n msm: subsystem_restart: Make subsystem_restart interrupt context safe\n msm: subsystem_restart: Prevent suspend from occuring during a restart\n" }, { "commit": "33822d87a0156168a1793c9d91c469182a11d5f8", "tree": "0ab7a8f7eaa9d355425d5adf8514bb021ae89031", "parents": [ "2fb4886187c45a388acdf5415a487a7353056279", "719aaa9a421c762e9505ed2e188b9ef43d06eb16" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 11:00:51 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 11:00:51 2012 -0700" }, "message": "Merge \"board-msm7627a-io: Add keypad support for SKU3/SKU7 devices\" into msm-3.0" }, { "commit": "2fb4886187c45a388acdf5415a487a7353056279", "tree": "4bcc916b33c63e5e2bdafe122f00e8678879d921", "parents": [ "14b69cebb7e6dec01343a2122ade057aac020df1", "e640e84a8e9a650e64ce082b8c6a43b23e37985f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 11:00:48 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 11:00:48 2012 -0700" }, "message": "Merge \"qseecom: Enable DFAB clock during bus scaling.\" into msm-3.0" }, { "commit": "14b69cebb7e6dec01343a2122ade057aac020df1", "tree": "cf15b09aef2b6edc4a9a4a680d8f9b5d018584d0", "parents": [ "f606b2acf110bbb3b53285a5bfcb5a65c2b89602", "b7c45f42b50b609bb632a0f1f1b2e404af38329a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 11:00:47 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 11:00:47 2012 -0700" }, "message": "Merge \"msm_fb: display: Enable pre-multiplied alpha for MDP303\" into msm-3.0" }, { "commit": "f606b2acf110bbb3b53285a5bfcb5a65c2b89602", "tree": "89db982de2aa1dc76610dcc63d0e67f1a7dc3362", "parents": [ "2c6fe849b8b372cd18e1d7217da2fd1bfc647780", "78a85d384d0e06f6fce8a3bf1042cd81fe5542bb" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 11:00:44 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 11:00:44 2012 -0700" }, "message": "Merge \"defconfig: copper: Enable slimbus support for copper board\" into msm-3.0" }, { "commit": "2c6fe849b8b372cd18e1d7217da2fd1bfc647780", "tree": "02ce3867f7ceedb70463c29b4330d14fda525a58", "parents": [ "ba92d5647df03064fa0a5e1facbb066752845cb7", "093e7fd496dbd7639d0b75d762f949ec84c0946f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 11:00:40 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 11:00:40 2012 -0700" }, "message": "Merge \"msm: board-msm7627a-wlan: Enable QRD3 and QRD7 wifi\" into msm-3.0" }, { "commit": "e6b77622bb24ab64117564052000b95dc4618231", "tree": "0b451a3e83a3623b3438f178aec5c2721c016775", "parents": [ "d23ff4bb47c017afb17fb43f176a2867d4cc53fa" ], "author": { "name": "Jordan Crouse", "email": "jcrouse@codeaurora.org", "time": "Thu Apr 05 16:55:54 2012 -0600" }, "committer": { "name": "Jordan Crouse", "email": "jcrouse@codeaurora.org", "time": "Fri Apr 06 11:31:23 2012 -0600" }, "message": "msm: kgsl: Dump the entire ringbuffer to the snapshot\n\nDump the entire ringbuffer to the snapshot and let the parser decide\nwhat it wants to show. This is a lot better then trying to make those\nsorts of decisions in the kernel. Even if we are dumping the entire\nringbuffer it still only makes sense to dump the IBs for the hanging\nframe so do the math to find the context switch before the\nlast submitted IB and dump only the IBs from there to rptr or the\nnext context switch whichever is first.\n\nChange-Id: Ic0dedbad3fed6be1fca3ed8a320386f70a562d43\nSigned-off-by: Jordan Crouse \u003cjcrouse@codeaurora.org\u003e\n" }, { "commit": "d23ff4bb47c017afb17fb43f176a2867d4cc53fa", "tree": "216708e2d0fe601901b0f161e84baab973336004", "parents": [ "c62852fc5c12cd1bacae298abd4552ad172ab77e" ], "author": { "name": "Shubhraprakash Das", "email": "sadas@codeaurora.org", "time": "Thu Apr 05 16:55:54 2012 -0600" }, "committer": { "name": "Jordan Crouse", "email": "jcrouse@codeaurora.org", "time": "Fri Apr 06 11:31:21 2012 -0600" }, "message": "msm: kgsl: Add markers to identify IB sequence start and end\n\nAdd nop packets in ringbuffer at the start and end of IB buffers\nsubnmitted by user space driver. These nop packets serve as markers\nthat can be used during replay, recovery, and snapshot to get valid\ndata for a GPU hang dump\n\nChange-Id: Id080672b7c04a1b6cfbccbcf5d4591cb5f0b3058\nSigned-off-by: Shubhraprakash Das \u003csadas@codeaurora.org\u003e\n" }, { "commit": "c9559e461e3df1b828218421430a38c9d7a38ca4", "tree": "83cb722c1366429d2ab014eaf91f3a6cbc4fd94f", "parents": [ "c62852fc5c12cd1bacae298abd4552ad172ab77e" ], "author": { "name": "Jordan Crouse", "email": "jcrouse@codeaurora.org", "time": "Thu Apr 05 16:55:56 2012 -0600" }, "committer": { "name": "Jordan Crouse", "email": "jcrouse@codeaurora.org", "time": "Fri Apr 06 11:18:41 2012 -0600" }, "message": "msm: kgsl: Store process mem entries in a rbtree\n\nThe list of memory objects attached to a process gets searched quite\na lot during normal operation of the driver. For processes with a\nlot of memory allocations, the linear search through the list is O(N)\nand uses a lot more CPU during critical loops than it should. Change\nthe mem entry list to a rbtree for faster search speeds.\n\nChange-Id: Ic0dedbad1b25d9d77f56f93696b2fe933fbad333\nSigned-off-by: Jordan Crouse \u003cjcrouse@codeaurora.org\u003e\n" }, { "commit": "beb23f51c9e671bee63eec2f1ea8e807124e2952", "tree": "2b4bb9b69271a10afac341916910aa655a1a8d10", "parents": [ "ba92d5647df03064fa0a5e1facbb066752845cb7" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Wed Jan 25 10:09:30 2012 -0800" }, "committer": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Fri Apr 06 09:52:40 2012 -0700" }, "message": "msm: acpuclock-7x30: Prepare PLLs during init\n\nThe new clk_prepare()/clk_unprepare() APIs need to be called from\nnon-atomic context. Since acpuclock is used in such places as\nsuspend/resume which is always in atomic context we must prepare\nthe PLLs during init or risk the chance of enabling a PLL that\nisn\u0027t prepared.\n\nChange-Id: I3a191e1750e82b443a1028fe0befa68a09089fb4\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "b137163557177643787363e055d6b5d02f3b917a", "tree": "7c522e8770c895e34d457df79197a792dd2554c9", "parents": [ "7b63736cd68dac64b889f18d3e9cfa037e12e076" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Thu Mar 29 16:44:15 2012 -0700" }, "committer": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Fri Apr 06 09:13:16 2012 -0700" }, "message": "defconfig: msm8960: Enable dumping the caches on panic\n\nFor debugging purposes, enable support to dump caches on panic.\nThis allows for post mortem analysis to determine if cache\ncorruption occured.\n\nChange-Id: I1f2d3ea33e78c06b6dad513d11a67e1e52a378de\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "7b63736cd68dac64b889f18d3e9cfa037e12e076", "tree": "6d98ce736bce7962c4d20550c3a9dd0413fd1dfa", "parents": [ "ba92d5647df03064fa0a5e1facbb066752845cb7" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Thu Mar 29 16:43:49 2012 -0700" }, "committer": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Fri Apr 06 09:13:16 2012 -0700" }, "message": "msm: Add support to dump the caches on panic\n\nDuring the normal course of panic, caches are flushed.\nIn most regular cases, this behavior is fine. If the\ncache itself is suspect, it is important to store whatever\ndata is there before restart. A suspect cache may manifest\nas a kernel panic due to an abort. Dump the caches during\nthe panic code path to save for analysis later.\n\nChange-Id: Iaa7194027f2f589a60bfade896cd455eb4cc8989\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "ba92d5647df03064fa0a5e1facbb066752845cb7", "tree": "a07497461fc237ac43bfe7715fac6e672cdda5e7", "parents": [ "d83cad4f0b98c783634a90835755ea55e6679279", "226b429d026195ff93b7de8066d8943b58dc65a5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 09:07:39 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 09:07:39 2012 -0700" }, "message": "Merge \"msm_fb: HDMI: Enhance EDID parser to read physical address\" into msm-3.0" }, { "commit": "d83cad4f0b98c783634a90835755ea55e6679279", "tree": "f0b4711e763b176d6d8f8716a4136eb81f7c7400", "parents": [ "e288a9f4773fb4f0bba72a1de9f0266ea45e4f5e", "135f3e094ea59c05802389c3b7ecc27074f9209c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 09:07:37 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 09:07:37 2012 -0700" }, "message": "Merge changes Idd7662db,I1fbefb35 into msm-3.0\n\n* changes:\n mfd: pm8xxx-misc: Make pm8xxx_preload_dVdd a no-op for PM8901 rev 2.3\n mfd: pmic8901: Add revision ID values for PM8901 rev 2.2 and 2.3\n" }, { "commit": "e288a9f4773fb4f0bba72a1de9f0266ea45e4f5e", "tree": "81aec60c436515313b9dc6f40e8a52f0e03289f0", "parents": [ "644cbd6ac5d8fe98bb589929599bda4be8407009", "6fdf4becd5fe50e52d587d35d1ee047385351f83" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 09:07:36 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 09:07:36 2012 -0700" }, "message": "Merge \"msm_fb: display: Create hdmi_as_primary node for boot parameter case\" into msm-3.0" }, { "commit": "644cbd6ac5d8fe98bb589929599bda4be8407009", "tree": "3bde6cef4e15bf0e801c0f8b21fb0c31df73527b", "parents": [ "725094c2421f5a2c10c6e4d480eec61cf4a74d14", "935e6a555123b95cf1149b22ce34a06638bd316c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 09:07:33 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 09:07:33 2012 -0700" }, "message": "Merge \"msm: iommu: Enable use of TTBR1 register of IOMMU\" into msm-3.0" }, { "commit": "725094c2421f5a2c10c6e4d480eec61cf4a74d14", "tree": "29138f51b3bf8407f3a7edfa50356c2ff32cb2d8", "parents": [ "fce8680c7ad6dc61148f32617d4c804e703bd21a", "af0c7cadc6779e7babad150551b95de74a9db91f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 09:07:28 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 09:07:28 2012 -0700" }, "message": "Merge \"msm: camera: Add proper error handling during msm_open\" into msm-3.0" }, { "commit": "fce8680c7ad6dc61148f32617d4c804e703bd21a", "tree": "5d0907cf0597d342869261a7ca6d50691f18cf29", "parents": [ "cf491a6d6a0f89a6020547d799bc2656c4993e99", "064bbf88f613b35601c6a8c710ba329804fe3bdf" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 09:07:27 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 09:07:27 2012 -0700" }, "message": "Merge \"msm: mpq8064: Add machine type and 8064 board support for mpq cdp\" into msm-3.0" }, { "commit": "cf491a6d6a0f89a6020547d799bc2656c4993e99", "tree": "76f3607d1cc80d590d428aae6dd2c6ccf60ad72d", "parents": [ "c62852fc5c12cd1bacae298abd4552ad172ab77e", "aae56f94a1e1409a5bdaf15860dc0c9924679425" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 09:07:25 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 09:07:25 2012 -0700" }, "message": "Merge \"pm8xxx: misc: correct typo for aux clock division\" into msm-3.0" }, { "commit": "c504cbb92e46a8689fae205b702e39ba9fad950a", "tree": "6e87f77a5f99ccd16f3df0efc369eb4f3d6feead", "parents": [ "c62852fc5c12cd1bacae298abd4552ad172ab77e" ], "author": { "name": "Amit Blay", "email": "ablay@codeaurora.org", "time": "Wed Apr 04 08:25:12 2012 +0300" }, "committer": { "name": "Amit Blay", "email": "ablay@codeaurora.org", "time": "Fri Apr 06 12:02:14 2012 +0300" }, "message": "defconfig: 9615: allow both hsic and usb to compile as modules.\n\nThis creates an image that contains both hsic and usb as modules,\nwhich can be then insmoded at boot-time (in the usb script) upon\neach reboot.\n\nChange-Id: I4afd900bdf969bd8f29aeec818a336822e235857\nSigned-off-by: Amit Blay \u003cablay@codeaurora.org\u003e\nSigned-off-by: Lena Salman \u003cesalman@codeaurora.org\u003e\n" }, { "commit": "b37fea4fc54f82ee9f04d5f709c5e5c7e29e3a38", "tree": "36c1f91375ab4e6f6e23b089c921e2fb06da395e", "parents": [ "e1482bf13da12ea4710c9f2a26f27a070337f272" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Apr 04 16:47:23 2012 -0700" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Thu Apr 05 21:36:27 2012 -0700" }, "message": "msm: clock: Make sure clock parents are set before handoff\n\nThe loop that calls clk_set_parent() on each clock in the table is the\nsame one that performs clock handoffs and calls clk_prepare_enable()\non them. For complex clock hierarchies, it\u0027s possible that a clock\u0027s\ngrandparent would not yet be set by the time clk_prepare_enable() is\ncalled.\n\nFix this by breaking the loop into two. The first loop iterates over\nall the clocks and sets up their parents. The second performs the\nhandoff operations which may depend on the parents being set.\n\nWith this, there is still no guarantee that a clock\u0027s parent is\nhanded off before the clock itself, but we\u0027re one step closer to\na robust solution.\n\nChange-Id: I4dece682e6d9a4c60746f8639f98789c2e23b20f\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "e1482bf13da12ea4710c9f2a26f27a070337f272", "tree": "f974874f7fdd225f74b39fc6b46f8b048ab604cf", "parents": [ "8c9dc3869a211955d0d42b555d09f5cdeb602f4f" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Apr 04 16:23:45 2012 -0700" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Thu Apr 05 21:36:26 2012 -0700" }, "message": "msm: Consolidate set-up of \u0027children\u0027 lists in msm_clock_init()\n\nCalling clk_set_parent(clk, clk_get_parent(clk)) worked but is confusing\nto read since it\u0027s not obvious why it\u0027s necessary to re-set a parent to\nsomething that already appears to be the parent.\n\nMake this clear by moving the similar implementations for associating\nchildren with their parent from clock-voter.c and clock-local.c into\nmsm_clock_init(), since there is no reason this code can\u0027t be\ngeneric.\n\nChange-Id: Ibb064fd1f1dfd0696cfa8e3e3056ebc461c90540\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "8c9dc3869a211955d0d42b555d09f5cdeb602f4f", "tree": "355005dafd6ef9d1837655bf49b416f8fb6bfb30", "parents": [ "a15833b4a7f1ab134261eb4a3ed034dcd8a1de0d" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Tue Apr 03 18:45:16 2012 -0700" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Thu Apr 05 21:36:26 2012 -0700" }, "message": "msm: clock: Move lateinit clock handoff code out of SKIP_AUTO_OFF check\n\nThe clock handoff feature is separate from auto-off and should not\nbe influenced by the SKIP_AUTO_OFF flag. Fix this so that\nclk_disable_unprepare() is called for handed-off clocks at lateinit\neven if that flag is set.\n\nChange-Id: Iee617e53f46846eec0ba74a61a4d7efb80a8ba6a\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "a15833b4a7f1ab134261eb4a3ed034dcd8a1de0d", "tree": "499081cf265db5499854cf859e67940bc5f1c6d5", "parents": [ "b64888fa8a9f44eba431857ed26e6b24e0812c03" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Tue Apr 03 11:00:56 2012 -0700" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Thu Apr 05 21:36:26 2012 -0700" }, "message": "msm: clock: Clean up handoff function return values\n\nThe intended interpretation of handoff function return value was for 1 or\ntrue to indicate that a handoff of a running clock had been successfully\nperformed, and 0 or false to indicate that it had not (either because the\nclock was off or the rate was invalid).\n\nSome handoff functions added later, however, used the value of 0 to mean\nsomething else: that the handoff of some state was successful, but the\nenabled/disabled state of the clock was not checked.\n\nThe vague definitions for the return codes of these functions make\nit difficult to understand their intended behaviour. Address this by\nusing an enum of return codes so that their intentions are obvious.\nAlso update the functions that did not check enabled/disabled state\nto do so and return meaningful values.\n\nChange-Id: Iebf4c9e4b358379f7f048a720888b299dc9ee8e5\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "b64888fa8a9f44eba431857ed26e6b24e0812c03", "tree": "e5c71cecebe5c2e43f512b3975fde9b6baa11f36", "parents": [ "c62852fc5c12cd1bacae298abd4552ad172ab77e" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Mon Apr 02 21:35:07 2012 -0700" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Thu Apr 05 21:36:15 2012 -0700" }, "message": "msm: clock: Split up struct clock_init_data\u0027s init() functions\n\nclock_init_data\u0027s init() function was called at the start of\nmsm_clock_init(), before looping through the clocks to set up parents\nand perform handoff operations. This meant that performing certain\noperations (ex. clk_set_rate()) in init() could interfere with the\nhandoff process by modifying the clock\u0027s registers before the handoff\ncode had a chance to examine them. It also meant that operations\ndone in init() would not take into account clock parent relationships,\nmaking it an inappropriate place to set the rates of voter clocks or\nenable clocks with parents.\n\nAddress this problem by splitting the init() function into two optional\nparts: a pre_init() function that executes before clock driver\ninitialization, and a post_init() function that executes after driver\ninitialization.\n\npre_init() is the appropriate place to perform any register or system\nconfiguration that should be done before clock driver initializes or\nhandoff if performed. Clock APIs should not be called from within it.\n\npost_init() is the appropriate place to perform any additional\nconfiguration that requires the clock driver already be initialized.\nClock APIs can be called within it.\n\nChange-Id: I4b6de87eeee02a86717f53fd42d22e811b10b3f7\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "6fdf4becd5fe50e52d587d35d1ee047385351f83", "tree": "bc89496d35af02f210e642aa0c3ec6a29cae45a6", "parents": [ "c62852fc5c12cd1bacae298abd4552ad172ab77e" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Fri Mar 30 18:34:05 2012 -0700" }, "committer": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Thu Apr 05 18:55:01 2012 -0700" }, "message": "msm_fb: display: Create hdmi_as_primary node for boot parameter case\n\nCreate hdmi_as_primary node for both boot parameter and compile-time\ncases when HDMI is set as primary display\n\nChange-Id: Ib170637e3792477e46ae0fb6044b298bf8de875c\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\n" }, { "commit": "064bbf88f613b35601c6a8c710ba329804fe3bdf", "tree": "ffce0e9e5d77717a135526c07470eda6f5fe9715", "parents": [ "c62852fc5c12cd1bacae298abd4552ad172ab77e" ], "author": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Sun Apr 01 13:23:39 2012 -0700" }, "committer": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Thu Apr 05 16:39:32 2012 -0700" }, "message": "msm: mpq8064: Add machine type and 8064 board support for mpq cdp\n\nThe apps bootloader sets this machine type if the processor and\nplatform are configured for MPQ 8064 CDP.\n\nChange-Id: I3cf55a8279d9a12cf106c906d0cb15c138dccd8d\nSigned-off-by: Joel King \u003cjoelking@codeaurora.org\u003e\n" }, { "commit": "84fdb11109b6de75ef6fdee324618b268caf7a6e", "tree": "9d48dca424df890ddc1c6dd1dfc1147ad1031a78", "parents": [ "935e6a555123b95cf1149b22ce34a06638bd316c" ], "author": { "name": "Shubhraprakash Das", "email": "sadas@codeaurora.org", "time": "Wed Apr 04 12:49:31 2012 -0600" }, "committer": { "name": "Shubhraprakash Das", "email": "sadas@codeaurora.org", "time": "Thu Apr 05 17:15:31 2012 -0600" }, "message": "msm: kgsl: Create a separate pool for mapping kgsl allocations\n\nCreate a separate kgsl pool to map global allocations made in kgsl\nwhen IOMMU is used. Also, set the ttbr1 to point to defaultpagetable.\nThis allows us to map the kgsl allocations only once to the\ndefaultpagetable instead of having to map it to every pagetable\ncreated.\n\nChange-Id: I70fc051e852bf6820e09a1113a63ac93f7e0a51b\nSigned-off-by: Shubhraprakash Das \u003csadas@codeaurora.org\u003e\n" }, { "commit": "935e6a555123b95cf1149b22ce34a06638bd316c", "tree": "8d991344c809571503f37831bbe19a2a60bc8efd", "parents": [ "c62852fc5c12cd1bacae298abd4552ad172ab77e" ], "author": { "name": "Shubhraprakash Das", "email": "sadas@codeaurora.org", "time": "Thu Apr 05 14:47:30 2012 -0600" }, "committer": { "name": "Shubhraprakash Das", "email": "sadas@codeaurora.org", "time": "Thu Apr 05 17:11:07 2012 -0600" }, "message": "msm: iommu: Enable use of TTBR1 register of IOMMU\n\nAdd a new platform data in iommu devices to indicate whether ttbr1\nshould be used which also dictates how the address space should be\nsplit between ttbr0 and ttbr1.\n\nChange-Id: Iab3aac74256bd4d49f47f89e6638f014e6e539e9\nSigned-off-by: Shubhraprakash Das \u003csadas@codeaurora.org\u003e\n" }, { "commit": "f0bd4cd4ca4114298fba41f18db9babe0533e075", "tree": "95ee0d7f4142d111da91139070d39d3ca029c7bd", "parents": [ "c62852fc5c12cd1bacae298abd4552ad172ab77e" ], "author": { "name": "Zhang Chang Ken", "email": "kenz@codeaurora.org", "time": "Sat Mar 31 14:35:50 2012 -0400" }, "committer": { "name": "Zhang Chang Ken", "email": "kenz@codeaurora.org", "time": "Thu Apr 05 18:15:50 2012 -0400" }, "message": "msm_fb: display: Epson ebi2 panel support\n\nSupport fb with ebi2 only(without mdp)\nAdd Epson ebi2 qvga panel support\n\nChange-Id: If61b2c522a102133f98f27b21dcc18d057b7ef25\nSigned-off-by: Zhang Chang Ken \u003ckenz@codeaurora.org\u003e\n" }, { "commit": "38ad6e103486a370f29dc2625dd59cc7a2162baa", "tree": "364fe0ccba6007007bc75a80741d7cbf3312e3c6", "parents": [ "74f8797e17dd66337d13ffdf8ec34309d33a9187" ], "author": { "name": "Sudhakara Rao Tentu", "email": "srtentu@codeaurora.org", "time": "Fri Mar 30 15:25:18 2012 -0700" }, "committer": { "name": "Sudhakara Rao Tentu", "email": "srtentu@codeaurora.org", "time": "Thu Apr 05 13:11:54 2012 -0700" }, "message": "msm: board-msm7x27a: Increase Idle timeout\n\nFor 7x27a and 7x27, clocks are controlled by modem. To improve stability,\nreduce number of interactions to modem to turn on and off GPU clocks.\n\nChange-Id: I3fbf8873bcdde36d2477e82d8a39c756b838662a\nSigned-off-by: Sudhakara Rao Tentu \u003csrtentu@codeaurora.org\u003e\n" }, { "commit": "a48794b4ab9c8dd94f12e92378a03ab9fc9675ab", "tree": "79c020ffcaa1ed5548d1ccea3f29dff700ea501e", "parents": [ "c62852fc5c12cd1bacae298abd4552ad172ab77e" ], "author": { "name": "Zhang Chang Ken", "email": "kenz@codeaurora.org", "time": "Sat Mar 31 17:45:21 2012 -0400" }, "committer": { "name": "Zhang Chang Ken", "email": "kenz@codeaurora.org", "time": "Thu Apr 05 15:05:58 2012 -0400" }, "message": "msm: 9615: Add display support to board file\n\nAdd gpio, regulator configurations\nAdd frame buffer initialization\n\nChange-Id: Ia1c0c0243258b81767c200a109fa0f7c88394fb2\nSigned-off-by: Zhang Chang Ken \u003ckenz@codeaurora.org\u003e\n" }, { "commit": "c2f2bcc792b95b102e546680cecc6f750d764bd9", "tree": "386e0a1391f615ea005182757e8d7ee065dcd379", "parents": [ "c62852fc5c12cd1bacae298abd4552ad172ab77e" ], "author": { "name": "Zhang Chang Ken", "email": "kenz@codeaurora.org", "time": "Fri Mar 30 18:32:02 2012 -0400" }, "committer": { "name": "Zhang Chang Ken", "email": "kenz@codeaurora.org", "time": "Thu Apr 05 15:03:40 2012 -0400" }, "message": "msm: 9615: Add ebi2 lcd device support to device file\n\nAdd device configuration and register device api\n\nChange-Id: I1e7e84a233be3d9b8d9d28298a009494d8aaf943\nSigned-off-by: Zhang Chang Ken \u003ckenz@codeaurora.org\u003e\n" }, { "commit": "226b429d026195ff93b7de8066d8943b58dc65a5", "tree": "8da0b2eceb3e28b0042d488b4067aea78a890781", "parents": [ "c62852fc5c12cd1bacae298abd4552ad172ab77e" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Fri Mar 16 15:35:31 2012 -0700" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Thu Apr 05 12:01:12 2012 -0700" }, "message": "msm_fb: HDMI: Enhance EDID parser to read physical address\n\nThis change adds the support for reading the physical address\nfield in Vendor Specific Data Block (VSDB) of the EDID data of\na sink.\n\nChange-Id: I435705a7709ea26cff71121a2c37fd630b267ae5\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "2bec977ed3fd82a0ac7fa24549e084299e90b38a", "tree": "8dfedacb1e83d64cedbd1e2eeb36c204557036e1", "parents": [ "41944c81dbceb232af67e0c62fca2e44719d4c2e" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Thu Apr 05 12:25:16 2012 -0600" }, "committer": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Thu Apr 05 12:25:16 2012 -0600" }, "message": "msm: bam_dmux: send ack to A2 for 9615 fallback\n\nA2 requires a wakeup ack in the bam to bam fallback case, otherwise A2\nmight stall waiting for it or assert.\n\nChange-Id: I8ae1e7d8f1ba85ad4834ff09c0b10dd88a50669e\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n" }, { "commit": "135f3e094ea59c05802389c3b7ecc27074f9209c", "tree": "592b8fde301eab3d6e51220f8bd7bd1daedc88a4", "parents": [ "e41d1db1e9e96a1f7b6eecbe9b84cc1092ce3f81" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Apr 05 10:15:23 2012 -0700" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Apr 05 11:21:30 2012 -0700" }, "message": "mfd: pm8xxx-misc: Make pm8xxx_preload_dVdd a no-op for PM8901 rev 2.3\n\nModify the pm8xxx_preload_dVdd function so that it does not\nperform any PMIC register writes for PMIC PM8901 if the PMIC\nrevision is greater than or equal to 2.3.\n\ndVdd preloading is not needed in order to reduce dVdd fluctuation\nat startup beginning with PM8901 rev 2.3.\n\nChange-Id: Idd7662db3cb494e6f3414fd8f1f8acfbf9bddfd1\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "e41d1db1e9e96a1f7b6eecbe9b84cc1092ce3f81", "tree": "5c9ce5d601fd2c9a2f97179785803ecdbcc5d4d0", "parents": [ "c62852fc5c12cd1bacae298abd4552ad172ab77e" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Apr 05 10:08:10 2012 -0700" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Apr 05 11:21:30 2012 -0700" }, "message": "mfd: pmic8901: Add revision ID values for PM8901 rev 2.2 and 2.3\n\nAdd revision ID values to identify PM8901 rev 2.2 and rev 2.3.\nAlso modify the version printing in the pmic8901 driver to utilize\na human readable format.\n\nChange-Id: I1fbefb35584ec19dfe0983eaff3c5192f1762392\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "78a85d384d0e06f6fce8a3bf1042cd81fe5542bb", "tree": "26d48511c1ddd8134867e2137b1d27fa9440a165", "parents": [ "c62852fc5c12cd1bacae298abd4552ad172ab77e" ], "author": { "name": "Sagar Dharia", "email": "sdharia@codeaurora.org", "time": "Sat Mar 24 01:11:30 2012 -0600" }, "committer": { "name": "Sagar Dharia", "email": "sdharia@codeaurora.org", "time": "Thu Apr 05 12:17:45 2012 -0600" }, "message": "defconfig: copper: Enable slimbus support for copper board\n\nEnable slimbus controller (V2) so that audio can start using\nslimbus functionality for copper board.\n\nChange-Id: Ibc0e49c0b27393375ef061fff6cd4b51950f3436\nSigned-off-by: Sagar Dharia \u003csdharia@codeaurora.org\u003e\n" }, { "commit": "4eb6b3cbf9555598ae44f16a18655fc4c94ea3ac", "tree": "ef0bfdf42b7710bf4e94dba90e78cba350f542ca", "parents": [ "ea5780a1fba602ae99e35893541556543edd844b" ], "author": { "name": "Girish Mahadevan", "email": "girishm@codeaurora.org", "time": "Tue Mar 20 17:07:28 2012 -0600" }, "committer": { "name": "Girish Mahadevan", "email": "girishm@codeaurora.org", "time": "Thu Apr 05 11:29:33 2012 -0600" }, "message": "msm: rpm_resources.c: Compare sleep time with idle state overhead time\n\nWhen determining an idle state to enter do not enter a state\nif the sleep time is less than or equal to the overhead time\nor the time needed to enter an idle state.\n\nChange-Id: I764002b573ff39db56e69943dee85ae5959ad462\nSigned-off-by: Girish Mahadevan \u003cgirishm@codeaurora.org\u003e\n" }, { "commit": "630bd147580b420f296a7e00c28147f5b4db7feb", "tree": "06bc61f8a94958f2258102f5d1aa2464ed26a334", "parents": [ "74f8797e17dd66337d13ffdf8ec34309d33a9187" ], "author": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Sat Mar 24 03:22:36 2012 +0530" }, "committer": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Thu Apr 05 22:11:24 2012 +0530" }, "message": "msm:board: Remove HSIC related configuration for 8930\n\nHSIC is currently not supported on 8930. Hence remove\nconfiguration related to it. Also don\u0027t add as platform\ndevice.\n\nChange-Id: I20ec11a4e4d66dcf2f4a072349252c06f7e0ca6f\nSigned-off-by: Mayank Rana \u003cmrana@codeaurora.org\u003e\n" }, { "commit": "6e36241ec29f65161c752597e61a60f9b7e9e972", "tree": "cae9606cba3f515371654a91a64ceeb4fdad3174", "parents": [ "74f8797e17dd66337d13ffdf8ec34309d33a9187" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Fri Dec 09 16:21:42 2011 -0700" }, "committer": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Thu Apr 05 09:36:42 2012 -0700" }, "message": "msm: kgsl: Add a pwrscale policy to interact with msm_dcvs\n\nThis pwrscale policy provides per-core idle information to the\nmsm_dcvs driver. It accepts frequency updates from the msm_dcvs\ndriver and updates the core frequency as needed.\n\nChange-Id: I201cfcb6ceedc19c27f7848781813d9c477f9f83\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "c62852fc5c12cd1bacae298abd4552ad172ab77e", "tree": "632c807682a5589197dc4a872f23f35b1e647ce3", "parents": [ "a51be454eb327351a3d54115fcc4a93713c42aae", "18e249a842a459c14624354f00ef3434d3b6c643" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Apr 05 07:11:45 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Apr 05 07:11:45 2012 -0700" }, "message": "Merge \"msm_fb: lvds: Fix uninitialized variable warnings\" into msm-3.0" }, { "commit": "a51be454eb327351a3d54115fcc4a93713c42aae", "tree": "81b960e30f2de8317f4574dcee35f61b780afe4d", "parents": [ "6288714ab22f240289ffaef6d2f6ab801e1b743f", "80c9bcfbc42dfbf20b3391dbd2bd9abe4dc095b6" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Apr 05 07:11:43 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Apr 05 07:11:43 2012 -0700" }, "message": "Merge \"board-msm7x27a-storage: Do not add SDC3 and SDC4 for QRD3/7 devices\" into msm-3.0" }, { "commit": "6288714ab22f240289ffaef6d2f6ab801e1b743f", "tree": "4e4503659fb074f152f64b009f8ff31d351f2e53", "parents": [ "2ba228498221726e5cf29544d2add9fae5bcb7e2", "be1a73934e12927da84244d70fa350885fb4d02b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Apr 05 07:11:39 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Apr 05 07:11:39 2012 -0700" }, "message": "Merge \"msm: clock-8960: Add xo mapping for msm_xo driver\" into msm-3.0" }, { "commit": "2ba228498221726e5cf29544d2add9fae5bcb7e2", "tree": "5862bed1b6a0913c01a33f0e8ae878c14a813e1b", "parents": [ "4774d352769b836b5f480a352f771975f9c9957e", "e25bde49960be4fa12cbc081aadabf95b793adc3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Apr 05 07:11:36 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Apr 05 07:11:36 2012 -0700" }, "message": "Merge \"[media] rc: Add support for GPIO based IR Receiver driver\" into msm-3.0" }, { "commit": "4774d352769b836b5f480a352f771975f9c9957e", "tree": "a23961b44b3fc58989c426ee2dd8a1b8a4efb105", "parents": [ "4c45848f93c0ff6e10f88b49e5bb825e9e420e9d", "5066a5f662d0d88ad4c94158fe392bb0fbd61cb4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Apr 05 07:11:34 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Apr 05 07:11:34 2012 -0700" }, "message": "Merge \"msm_fb: HDMI: Support VCDB parsing of EDID data\" into msm-3.0" }, { "commit": "4c45848f93c0ff6e10f88b49e5bb825e9e420e9d", "tree": "dc7a5862657bd5ddce06de7d72d807c36610774d", "parents": [ "dea8f9e57f0dcafbb796be8d82753a8b9ee205b8", "a2b541424e9acac42f9bd9cb9183b1f9c9ac9cbf" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Apr 05 07:11:29 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Apr 05 07:11:30 2012 -0700" }, "message": "Merge \"USB: android: Fix missing USB DISCONNECT uevent\" into msm-3.0" }, { "commit": "dea8f9e57f0dcafbb796be8d82753a8b9ee205b8", "tree": "1b5728cb04615eb4b45ba27c4745799ef2fbfdda", "parents": [ "74f8797e17dd66337d13ffdf8ec34309d33a9187", "ead426fbce2248346964e31a7b50613351ca6ad5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Apr 05 07:11:28 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Apr 05 07:11:28 2012 -0700" }, "message": "Merge \"msm: watchdog: Add support for in-kernel bark FIQ for MSM9615\" into msm-3.0" }, { "commit": "74f8797e17dd66337d13ffdf8ec34309d33a9187", "tree": "46167b43969e00c39b2c986b4c5963714c30a53a", "parents": [ "c29a2bdb84b605b0345b9d1b507e6413a4e15ae8", "687b109b5f46caf68efde0a1c3a1084a5576a997" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Apr 05 07:11:26 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Apr 05 07:11:26 2012 -0700" }, "message": "Merge \"msm_fb : display : Add 60fps support for NT35516 qHD panel\" into msm-3.0" }, { "commit": "c29a2bdb84b605b0345b9d1b507e6413a4e15ae8", "tree": "8a5af56fea38527e46186d36dc76ef3b27064afb", "parents": [ "8f4a9bc17b67e7e7359ac9b40b51668c0afc0b5d", "21f960c26aca734315eec1d4ce7863180c13f032" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Apr 05 07:11:24 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Apr 05 07:11:24 2012 -0700" }, "message": "Merge \"msm: 7x27a: audio: Increase PMEM AUDIO size.\" into msm-3.0" }, { "commit": "a8417e6c445ac8f1b27d9d24edb32bd5d14e9fd0", "tree": "46963f845f5464dadf9681aa92d16593133ec489", "parents": [ "9df83d350cddab2e1cf7a91d5add40db56d67d37" ], "author": { "name": "Peter Krystad", "email": "pkrystad@codeaurora.org", "time": "Wed Mar 21 16:58:17 2012 -0700" }, "committer": { "name": "Peter Krystad", "email": "pkrystad@codeaurora.org", "time": "Thu Apr 05 07:00:41 2012 -0700" }, "message": "Bluetooth: Ensure socket pointer is set during callback\n\nFix issue where when setting up an AMP link the socket pointer\nis not set when the logical link complete callback is called,\nresulting in the L2CAP channel being disconnected.\n\nThe socket pointer must be set before the HCI logical link\ncreate command is sent, as it is possible for the logical link\ncomplete event to arrive before the HCI command send logic\nhas returned.\n\nChange-Id: I5d89c14d45bd6b4cf47d5754f822b435ce8076a8\nSigned-off-by: Peter Krystad \u003cpkrystad@codeaurora.org\u003e\nCRs-fixed: 344553\n" }, { "commit": "be1a73934e12927da84244d70fa350885fb4d02b", "tree": "5929d8942cbc5e3a3f9709669142801a0ab4b50e", "parents": [ "9df83d350cddab2e1cf7a91d5add40db56d67d37" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Mon Apr 02 20:17:11 2012 -0700" }, "committer": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Thu Apr 05 01:42:34 2012 -0700" }, "message": "msm: clock-8960: Add xo mapping for msm_xo driver\n\nThe msm_xo driver needs a mapping to the CXO clock so that it can\nturn the buffer on and off via the clock API. The table for 8930\nwas added around the same time the the patch to move msm_xo to\nthe clock API was merged so this was missed. We replace the USB\nmapping as well because the usb driver is voting on D0 via the\nmsm_xo interface and not the clock API.\n\nChange-Id: I506a5e54448c994a64af763360b4c080b09b5708\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "8f4a9bc17b67e7e7359ac9b40b51668c0afc0b5d", "tree": "65da3a7112b54ebbabdab19b701c7a91b5179645", "parents": [ "efd2467f5703a31e4b5e2f0616fb1e48194f423d", "212ab360bf81bb3e21fc5d8f9790a9732849bce6" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Apr 05 00:43:38 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Apr 05 00:43:38 2012 -0700" }, "message": "Merge changes Iee6305ee,I0dc64d88,I06ece3fb into msm-3.0\n\n* changes:\n msm: qdss: enable qdss support for 8064\n msm: qdss: switch to using qdss apis in the etm driver\n msm: qdss: add support for qdss_get/put and qdss_enable/disable\n" }, { "commit": "efd2467f5703a31e4b5e2f0616fb1e48194f423d", "tree": "c4c0cbc839579db238cb4546e7f98490d552f046", "parents": [ "b9057a056774aa2892d1aa8ab70d046ea62d863e", "677dbbd8ec5890429f354d0a4d644e649d269b67" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Apr 05 00:43:34 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Apr 05 00:43:34 2012 -0700" }, "message": "Merge \"of: spmi: Verify that nodes are available before creating devices\" into msm-3.0" }, { "commit": "b9057a056774aa2892d1aa8ab70d046ea62d863e", "tree": "07068d487aa80edf1be6cf4e553b8f1568a2d529", "parents": [ "44e8109efc332e7c0933151008fe5462e1f1d7e2", "f6fe918d7684ef163ed2f81f8c7fd3a136921468" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Apr 05 00:43:30 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Apr 05 00:43:30 2012 -0700" }, "message": "Merge \"msm: qdss: separate initialization of different drivers\" into msm-3.0" }, { "commit": "44e8109efc332e7c0933151008fe5462e1f1d7e2", "tree": "a36ec9f635827865a846223c8442e65ac1234514", "parents": [ "f8f5ae9c5efce0cc3ae854a0c7eca01f5a373425", "798fe55954f8dacf2eb7b326d00379e126907063" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Apr 05 00:43:22 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Apr 05 00:43:22 2012 -0700" }, "message": "Merge \"msm_serial_hs_lite: Decouple line number from device ID\" into msm-3.0" }, { "commit": "f8f5ae9c5efce0cc3ae854a0c7eca01f5a373425", "tree": "81100743767b98b24b5c50074628e6bad926e7af", "parents": [ "1c96f1ab75cfda23fd485a48f19c62bd384c83e3", "87436bd3a8889797bd2612309a3339c813795298" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Apr 05 00:43:20 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Apr 05 00:43:20 2012 -0700" }, "message": "Merge \"of: spmi: Remove excessive loop in dev-container traversal\" into msm-3.0" }, { "commit": "1c96f1ab75cfda23fd485a48f19c62bd384c83e3", "tree": "714b05b74b053ef8c47ffa23132298545757f692", "parents": [ "9df83d350cddab2e1cf7a91d5add40db56d67d37", "4a771c59914d20b8fe234ceac2129be017052178" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Apr 05 00:43:18 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Apr 05 00:43:18 2012 -0700" }, "message": "Merge \"arm: gic: Add empty stub for gic_set_irq_secure function\" into msm-3.0" }, { "commit": "9df83d350cddab2e1cf7a91d5add40db56d67d37", "tree": "e0188d025852ff6d0dee0c0df219be9a1ce3d690", "parents": [ "3cdff26fae8ef18d8dfc8020ad0af51e989a3f4f", "da6fa7aa70c4be2a6f8b1061e05586b2a413eac1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Apr 05 00:43:15 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Apr 05 00:43:15 2012 -0700" }, "message": "Merge \"ASoC: WCD9310: Add 5ms delay during slimbus port shutdown\" into msm-3.0" }, { "commit": "093e7fd496dbd7639d0b75d762f949ec84c0946f", "tree": "6ed6c1141eff9c9f62ffda8dbde58a99279bd047", "parents": [ "c0cf72b35de1b815742f91d1f42a45a872eddd4c" ], "author": { "name": "Aparna Mallavarapu", "email": "aparnam@codeaurora.org", "time": "Thu Apr 05 13:08:50 2012 +0530" }, "committer": { "name": "Aparna Mallavarapu", "email": "aparnam@codeaurora.org", "time": "Thu Apr 05 13:11:59 2012 +0530" }, "message": "msm: board-msm7627a-wlan: Enable QRD3 and QRD7 wifi\n\nEnable wifi by configuring wlan sys reset en gpio for\nQRD3/QRD3-1 and QRD7 devices.\n\nChange-Id: I61dc2a5eaf62b373b372a52f96f19809f70e7e80\nSigned-off-by: Aparna Mallavarapu \u003caparnam@codeaurora.org\u003e\n" }, { "commit": "e25bde49960be4fa12cbc081aadabf95b793adc3", "tree": "c70f5b26a4cfb58191cc7805ebfe965d090176f5", "parents": [ "c0cf72b35de1b815742f91d1f42a45a872eddd4c" ], "author": { "name": "Ravi Kumar V", "email": "kumarrav@codeaurora.org", "time": "Tue Feb 28 01:51:40 2012 -0300" }, "committer": { "name": "Ravi Kumar V", "email": "kumarrav@codeaurora.org", "time": "Thu Apr 05 11:23:42 2012 +0530" }, "message": "[media] rc: Add support for GPIO based IR Receiver driver\n\nAdds GPIO based IR Receiver driver. It decodes signals using decoders\navailable in rc framework.\n\nChange-Id: Ifc4cbb6d5a507aeb9671fb0d559b97b1a95ea09c\nSigned-off-by: Ravi Kumar V \u003ckumarrav@codeaurora.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "3cdff26fae8ef18d8dfc8020ad0af51e989a3f4f", "tree": "7cfb85cf6440196ed1bbbd103a9443050e0280a0", "parents": [ "8813d8a595b5c80bf0407fc9dff8931331214db5", "a609f1d21dea8d02c858a4f61b6fbda7a91539a3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Apr 04 20:22:12 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Apr 04 20:22:12 2012 -0700" }, "message": "Merge \"Bluetooth: Allow AMP move to wait for Cfm Rsp before LL complete\" into msm-3.0" }, { "commit": "8813d8a595b5c80bf0407fc9dff8931331214db5", "tree": "660ed1b57a4b6279db1ad1486a938c686d82a9bb", "parents": [ "19949e3f2eb12a2938119be719d55865b260e4e1", "50ca18e64c2fdbd09b1302860da561f1728aa0a0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Apr 04 20:22:07 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Apr 04 20:22:07 2012 -0700" }, "message": "Merge \"msm: memory: Fix section mismatch warning\" into msm-3.0" }, { "commit": "19949e3f2eb12a2938119be719d55865b260e4e1", "tree": "1cab551e0ff4b45c31c7b41dd0262ff9c894f4e1", "parents": [ "355a0f1b8e3981e447bce5c415b3970c33ec9744", "358abd3d323934c45b9fe226238813ce0be0644a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Apr 04 20:21:34 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Apr 04 20:21:34 2012 -0700" }, "message": "Merge \"msm: kgsl: flush cache otherwise memory will be uninitialized\" into msm-3.0" }, { "commit": "1c20e3fbd5f9780ab28c44fec635ec4eb05a452f", "tree": "5719244fb990c633ecaf9135176b5c506c55b7b9", "parents": [ "355a0f1b8e3981e447bce5c415b3970c33ec9744" ], "author": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Wed Apr 04 19:29:14 2012 -0700" }, "committer": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Wed Apr 04 19:29:14 2012 -0700" }, "message": "usb: diag: Avoid NULL pointer dereference in debugfs\n\nThe debugfs entry functions used to read and clear the statistics\ncounters loop over the list of open diag channels. However, a\nchannel might not be bound to a gadget interface if diag_function_add\ndoesn\u0027t get called, hence its priv_usb member may be NULL. In that\ncase simply avoid accessing it altogether as its counters aren\u0027t used\nanyway.\n\nCRs-fixed: 346598\nChange-Id: Icbd84ae0df83a5fe4c62b19fd7c95585e8e6e491\nSigned-off-by: Jack Pham \u003cjackp@codeaurora.org\u003e\n" }, { "commit": "212ab360bf81bb3e21fc5d8f9790a9732849bce6", "tree": "f644dba98f9868927b750f40e44762590d0d275a", "parents": [ "e10a77c9636b68b64a14a66a590fa6ea617b2c67" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Fri Mar 16 12:30:07 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Wed Apr 04 16:42:43 2012 -0700" }, "message": "msm: qdss: enable qdss support for 8064\n\nThis allows qdss sources (krait pft trace and oxili trace) to be\nused for debugging on 8064.\n\nChange-Id: Iee6305ee8cb4522b63b48dc8b9f66757ea36fd4e\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" } ], "next": "e10a77c9636b68b64a14a66a590fa6ea617b2c67" }