)]}'
{
  "log": [
    {
      "commit": "d1d4b10cdafb8dd4044a3b67b05f759047612fdc",
      "tree": "3976e5921905e34a758eed86b08b83ea1ed5c1fd",
      "parents": [
        "75b93489b449db4a34f0424c72f51821d985f52f"
      ],
      "author": {
        "name": "Guennadi Liakhovetski",
        "email": "g.liakhovetski@gmx.de",
        "time": "Sun May 23 16:39:09 2010 +0000"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Mon May 24 08:53:37 2010 +0900"
      },
      "message": "serial: sh-sci: fix handling of SCIFB sh-mobile ports\n\nSCIFB ports have a slightly different register layout and a different FIFO\nsize from SCIFA ports, in DMA mode they have to be treated just like SCIFA.\n\nSigned-off-by: Guennadi Liakhovetski \u003cg.liakhovetski@gmx.de\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "d7bbf7f50e03c427debb6d7d960c48b9b934e7e2",
      "tree": "e5fda7ed04001122b2f2643e16763a347db99645",
      "parents": [
        "8d099d4446fcb23ca6cc054bde3c35b417e29b3b"
      ],
      "author": {
        "name": "Guennadi Liakhovetski",
        "email": "g.liakhovetski@gmx.de",
        "time": "Fri Mar 19 13:52:35 2010 +0000"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Tue Mar 23 13:33:45 2010 +0900"
      },
      "message": "SH: fix SCIFA SCASCR register bit definitions\n\nSigned-off-by: Guennadi Liakhovetski \u003cg.liakhovetski@gmx.de\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "8d099d4446fcb23ca6cc054bde3c35b417e29b3b",
      "tree": "ebbbd5a429d4e90ec63b95af9b8d439fcd4b9c8c",
      "parents": [
        "67eaa3e4fb29a758f92c9296ca006264a034e9c2"
      ],
      "author": {
        "name": "Magnus Damm",
        "email": "damm@opensource.se",
        "time": "Tue Mar 16 11:21:07 2010 +0000"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Tue Mar 23 13:23:15 2010 +0900"
      },
      "message": "serial: sh-sci: fix SH-Mobile SH breakage\n\nThe follwing commit breaks SH-Mobile on non-ARM platforms:\n\"8a77b8d serial: sh-sci: Support ARM-based SH-Mobile CPUs.\"\n\nThe commit assumed that CONFIG_ARCH_SHMOBILE only was set\non ARM platforms, but it turns out that this kconfig is also\nset by all SH-based SoCs. Sh7724 and other older SH-Mobile\nSoCs are all broken without this fix.\n\nThis patch converts the \"defined(CONFIG_ARCH_SHMOBILE)\" into\none \"defined()\" per SoC model - similar to existing SH code.\n\nReported-by: Guennadi Liakhovetski \u003cg.liakhovetski@gmx.de\u003e\nSigned-off-by: Magnus Damm \u003cdamm@opensource.se\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "8a77b8d0744ab21b59a9413c41c6a3d6cb9b0b4f",
      "tree": "8bac6436e4068190f60b0fa950082cfa9b8543d9",
      "parents": [
        "65a5b28f0af00dddd785b516914739460562638f"
      ],
      "author": {
        "name": "Magnus Damm",
        "email": "damm@opensource.se",
        "time": "Fri Feb 05 11:15:33 2010 +0000"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Mon Feb 08 12:49:01 2010 +0900"
      },
      "message": "serial: sh-sci: Support ARM-based SH-Mobile CPUs.\n\nAdd support for ARM-based SH-Mobile CPUs to the sh-sci driver.\n\nAlso remove the SCLSR register that is missing on sh772x, sh7705 and\nSH-Mobile.\n\nSigned-off-by: Magnus Damm \u003cdamm@opensource.se\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "9e9622d1a064705181bea0600ea9eacd95adab7f",
      "tree": "8334f134bc6cfe95d9be2e512e455d4bd976f36b",
      "parents": [
        "6339204ecc2aa2067a99595522de0403f0854bb8"
      ],
      "author": {
        "name": "Magnus Damm",
        "email": "damm@opensource.se",
        "time": "Mon Feb 08 11:47:44 2010 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Mon Feb 08 11:47:44 2010 +0900"
      },
      "message": "serial: sh-sci: remove SCIF code in sci_rxd_in()\n\nSince sci_rxd_in() is used by SCI only, clean up\nthe header file by killing off code dealing with\nSCIF ports and their register definitions.\n\nAlso introduce a default sci_rxd_in() function\nwhich can be shared by all SCIF-only processors.\n\nSigned-off-by: Magnus Damm \u003cdamm@opensource.se\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "32b53076c31ce9159740b744d5eb5d9505312add",
      "tree": "6687980a51c74629085eb8fa2e62172f480b3d53",
      "parents": [
        "154280fd0e890814a249bf4a79b4340fb367f1a7"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Thu Dec 24 14:52:43 2009 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Thu Dec 24 14:52:43 2009 +0900"
      },
      "message": "serial: sh-sci: Convert tremaining ctrl_xxx I/O routines to __raw_xxx.\n\nctrl_xxx() is an antiquated SH interface, while __raw_xxx is the standard\nAPI that accomplishes the same thing. As such, this converts the\nremaining sh-sci straggles over, which enables the driver to be wired up\nfor ARM SH-Mobile CPUs as well.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "edad1f208e6edabb917e4f8a33c7e45bf78bb79d",
      "tree": "beada10e4fdcb4984c8ed3481cf805012cd32861",
      "parents": [
        "6ba653830c85a37d0a054f1e43d9b51e59d1150b"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Nov 25 16:23:35 2009 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Nov 25 16:23:35 2009 +0900"
      },
      "message": "serial: sh-sci: Depend on HAVE_CLK unconditionally.\n\nThe sh-sci code conditionalized the clock framework support in order to\ngive the other platforms a chance to catch up. sh64 supported this some\ntime ago and the forthcoming ARM changes handle this as well, this leaves\nh8300 as the odd one out. H8300 has had since 2.5 to merge it\u0027s sh-sci\nsupport upstream, and has yet to do so. At this point I will no longer be\nholding back the driver to support an unreponsive architecture, 7 years\nis quite enough of a grace period. Support is easily implemented on the\narchitecture if and when it ever decides to merge its changes upstream.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "c01f0f1a4a96eb3acc5850e18cc43f24366966d0",
      "tree": "402c307afc1af3023e1e1528f0abd190e94ae4e7",
      "parents": [
        "9e7291c1124655980ab05fc89930de8e218c7d64"
      ],
      "author": {
        "name": "Yoshihiro Shimoda",
        "email": "shimoda.yoshihiro@renesas.com",
        "time": "Fri Aug 21 16:30:28 2009 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Fri Aug 21 17:25:47 2009 +0900"
      },
      "message": "sh: Add initial support for SH7757 CPU subtype\n\nSigned-off-by: Yoshihiro Shimoda \u003cshimoda.yoshihiro@renesas.com\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "e9e8b1fb995543c4cc3930f465923a552b2e48b7",
      "tree": "799d90e928bd3afd4ad97c435f4fba96a9ea3a61",
      "parents": [
        "cd89436e54b29a07a383ee82f2f718d8c9d24cc4"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Sat May 09 14:31:37 2009 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Sat May 09 14:31:37 2009 +0900"
      },
      "message": "sh: Fix up the sh64 earlyprintk build.\n\nsci_rxd_in() on SH-5 wants to be using SCSPTR, not SCSPTR2.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "168f36237b16e2b3159e24c7d3b658e3c912d149",
      "tree": "35b0adbdb4c30128c8c62ad1ec43c31bbe13dbf7",
      "parents": [
        "54507f6ee99778a727ff1b38a1f4050fe6479835"
      ],
      "author": {
        "name": "Yoshinori Sato",
        "email": "ysato@users.sourceforge.jp",
        "time": "Tue Apr 28 04:40:15 2009 +0000"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Fri May 08 23:54:47 2009 +0900"
      },
      "message": "serial: sh-sci: Fix up h8300 support.\n\n- Dummy SCIF functions define.\n- h8300 specific header include.\n\nSigned-off-by: Yoshinori Sato \u003cysato@users.sourceforge.jp\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "47948d2bd6d27648a107a27357b3bc5ad054ff64",
      "tree": "5ccee82d93aba97446125ebd46f419f59ecfff09",
      "parents": [
        "0207a2efb43d81e29e23662b5d035945688a103f"
      ],
      "author": {
        "name": "Kuninori Morimoto",
        "email": "morimoto.kuninori@renesas.com",
        "time": "Wed Apr 15 11:42:47 2009 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Thu Apr 16 14:46:32 2009 +0900"
      },
      "message": "serial: sh-sci: SH7724 support.\n\nSigned-off-by: Kuninori Morimoto \u003cmorimoto.kuninori@renesas.com\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "55ba99eb211a06709237cb322ecd8c8b6faf6159",
      "tree": "dc22ab87110e3e8fd26496fe6eebfbf261cc6c62",
      "parents": [
        "93fde774546c947ac8563da431f0a6d47452551d"
      ],
      "author": {
        "name": "Kuninori Morimoto",
        "email": "morimoto.kuninori@renesas.com",
        "time": "Tue Mar 03 15:40:25 2009 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Tue Mar 03 15:40:25 2009 +0900"
      },
      "message": "sh: Add support for SH7786 CPU subtype.\n\nThis adds preliminary support for the SH7786 CPU subtype.\n\nWhile this is a dual-core CPU, only UP is supported for now. L2 cache\nsupport is likewise not yet implemented.\n\nMore information on this particular CPU subtype is available at:\n\n\thttp://www.renesas.com/fmwk.jsp?cnt\u003dsh7786_root.jsp\u0026fp\u003d/products/mpumcu/superh_family/sh7780_series/sh7786_group/\n\nSigned-off-by: Kuninori Morimoto \u003cmorimoto.kuninori@renesas.com\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "41480ae7a383dcffa497decdd97b3cb2caaa18ec",
      "tree": "f1e3afce2cbd0bbc544cd86a73e5b3093eb081c4",
      "parents": [
        "508eb2ce222053e51e2243b7add8eeac85b1d250",
        "34aeb43e2d3800f4d8f96feb9f1b49cd506679d5"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Thu Feb 12 17:27:56 2009 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Thu Feb 12 17:27:56 2009 +0900"
      },
      "message": "Merge branch \u0027sh/stable-updates\u0027\n"
    },
    {
      "commit": "34aeb43e2d3800f4d8f96feb9f1b49cd506679d5",
      "tree": "dbce218ebfff149e37795b6b9f4efeb0d3cc8b5d",
      "parents": [
        "270c5609e2540290d5d9b9f323b7b652cf0c5b75"
      ],
      "author": {
        "name": "Kuninori Morimoto",
        "email": "morimoto.kuninori@renesas.com",
        "time": "Tue Feb 10 09:04:00 2009 +0000"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Thu Feb 12 17:27:12 2009 +0900"
      },
      "message": "serial: sh-sci: fix overrun error handling for SH7785 SCIF.\n\nThere was a typo for the overrun bit definition, causing it not to be\nhandled correctly on SH7785, fix it up.\n\nSigned-off-by: Kuninori Morimoto \u003cmorimoto.kuninori@renesas.com\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "69edbba0021a48fe034849501513930f6175cb5d",
      "tree": "51499128883b2e84bce5dcaa78e6e943c37eeb40",
      "parents": [
        "3292094e88ce6b76714dad8ec4b43d7c5c12ada2"
      ],
      "author": {
        "name": "Magnus Damm",
        "email": "damm@igel.co.jp",
        "time": "Thu Dec 25 18:17:34 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Tue Jan 27 14:49:10 2009 +0900"
      },
      "message": "sh: use gpiolib\n\nThis patch updates the SuperH gpio code to make use of gpiolib. The\ngpiolib callbacks get() and set() are lockless, but we use our own\nspinlock for the other operations to make sure hardware register\nbitfield accesses stay atomic.\n\nSigned-off-by: Magnus Damm \u003cdamm@igel.co.jp\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "f686359e0da5ae71459ee045646a5f508f9ff6d8",
      "tree": "3554666dbb15272f32042d89a5f52e5272331daa",
      "parents": [
        "3442c0d627985778ef275985831f8fdb5d626c25"
      ],
      "author": {
        "name": "Magnus Damm",
        "email": "damm@igel.co.jp",
        "time": "Tue Jan 20 12:18:22 2009 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Jan 21 17:44:32 2009 +0900"
      },
      "message": "sh: fix sh-sci / early printk build on sh7723\n\nThis patch adds the SCSPTR register to the sh-sci driver in\nthe case of sh7723 to make sure early printk builds properly.\n\nSigned-off-by: Magnus Damm \u003cdamm@igel.co.jp\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "fd88cac90587a456eb944bf794634229553c11b9",
      "tree": "51d7280fe1cc327473c9d6b90492bdf7118f69b0",
      "parents": [
        "e16038aba3daee694b318fc7a7b4db74a485cde5"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Fri Jan 09 16:32:08 2009 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Jan 21 17:44:04 2009 +0900"
      },
      "message": "serial: sh-sci: Fix up SH7720/SH7721 SCI build.\n\nMissing definitions for PORT_xxx defs.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "d5701647f1aaaea5da20023976d86af79ab84707",
      "tree": "bbab402d7c58fabd874b390736515723bce69a96",
      "parents": [
        "d830fa4584a4015989b9b396a80779f28f277baa"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Tue Dec 16 20:07:27 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Mon Dec 22 18:44:43 2008 +0900"
      },
      "message": "serial: sh-sci: Generalize port pin initialization.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "d830fa4584a4015989b9b396a80779f28f277baa",
      "tree": "0adfcdde0b697d72adc8f0d88c1ce0a4c3efedce",
      "parents": [
        "762c69e3cad67a5cc5a01ba74e0b552ae4615258"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Tue Dec 16 19:29:38 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Mon Dec 22 18:44:43 2008 +0900"
      },
      "message": "serial: sh-sci: Tidy up fifo overrun error handling.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "2825999e8a9bd7ab7e25a7e7475c7cdd10371a13",
      "tree": "2abe611b0ff90a255f6c00f0aacad4c1a2d8cdd5",
      "parents": [
        "135210b378d26f9a9a0c901d0089522c06b5807a"
      ],
      "author": {
        "name": "Peter Griffin",
        "email": "pgriffin@mpc-data.co.uk",
        "time": "Fri Nov 28 22:48:20 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Mon Dec 22 18:43:50 2008 +0900"
      },
      "message": "sh: Add support for SH7201 CPU subtype.\n\nThis patch adds support for the SH-2A FPU based SH7201 processor subtype.\n\nSigned-off-by: Peter Griffin \u003cpgriffin@mpc-data.co.uk\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "1a22f08dbd0e77c7cf45b5f527f93131d0b591b6",
      "tree": "c3f1309b26c6c8072b1194d387931ad331a36599",
      "parents": [
        "acca4f4d9bd657e8bc7e1665ba5077465138f133"
      ],
      "author": {
        "name": "Yoshihiro Shimoda",
        "email": "shimoda.yoshihiro@renesas.com",
        "time": "Tue Nov 11 12:19:05 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Nov 12 12:29:56 2008 +0900"
      },
      "message": "serial: sh-sci: fix cannot work SH7723 SCIFA\n\nSH7723 has SCIFA. This module is similer SCI register map, but it has FIFO.\nSo this patch adds new type(PORT_SCIFA) and change some type checking.\n\nSigned-off-by: Yoshihiro Shimoda \u003cshimoda.yoshihiro@renesas.com\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "a8884e3415c29c58a5875d54c109c4a7fcaa6fb4",
      "tree": "decd6b4aa58b398b6540086342724b5fad546bfb",
      "parents": [
        "7abc404a5a1e3785749acb8dbfcc558223f78444"
      ],
      "author": {
        "name": "Michael Trimarchi",
        "email": "trimarchimichael@yahoo.it",
        "time": "Fri Oct 31 16:10:23 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Fri Oct 31 16:10:23 2008 +0900"
      },
      "message": "sh: Fix up the shared IRQ demuxer\u0027s control bit testing logic.\n\nCorrect the interrupt handler in sh4 serial device, return the correct\nvalue and check for what is anabled in the SCSCR register. The sh7722 is\nbroken just sending a break using minicom.\n\nSigned-off-by: Michael Trimarchi \u003ctrimarchimichael@yahoo.it\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "7abc404a5a1e3785749acb8dbfcc558223f78444",
      "tree": "2d3756132eaec8cba2a699a26755ae1799291d34",
      "parents": [
        "961e9ff9025ef2dfdebe843549b7e1ec4d48c17c"
      ],
      "author": {
        "name": "Matt Fleming",
        "email": "mjf@gentoo.org",
        "time": "Wed Oct 29 07:16:02 2008 +0000"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Fri Oct 31 16:06:12 2008 +0900"
      },
      "message": "Define SCSPTR1 for SH 7751R\n\nAfter the recent commit to kill off SCI/SCIF special casing SH 7751R\nfails to compile with CONFIG_SH_RTS7751R2D set. This is because SCSPTR1\nis undefined. Take the value for SCSPTR1 from the SH7751R Group Hardware\nManual.\n\nSigned-off-by: Matt Fleming \u003cmjf@gentoo.org\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "961e9ff9025ef2dfdebe843549b7e1ec4d48c17c",
      "tree": "538991b394ba74cddb4035f085231a6863b59512",
      "parents": [
        "47c2968c84cb737f8dd8b79e34b75242ec7e0796"
      ],
      "author": {
        "name": "Nobuhiro Iwamatsu",
        "email": "iwamatsu.nobuhiro@renesas.com",
        "time": "Wed Oct 29 13:33:45 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Fri Oct 31 16:03:41 2008 +0900"
      },
      "message": "sh: Add sci_rxd_in of SH4-202\n\nSH4-202 doesn\u0027t have SCSXX1. But it is treated so that there is SCSPTR1 in\ncurrent code. This patch add sci_rxd_in of SH4-202.\n\nSigned-off-by: Nobuhiro Iwamatsu \u003ciwamatsu.nobuhiro@renesas.com\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "aeffd54ad7e3af513c6a0dadda71e6316e5ba230",
      "tree": "f642a0c180d6506b8e26790a3b28d461e1473081",
      "parents": [
        "140626673289a25f677fb006fafb3f6a95b8eb97"
      ],
      "author": {
        "name": "Nobuhiro Iwamatsu",
        "email": "iwamatsu.nobuhiro@renesas.com",
        "time": "Wed Oct 29 13:34:50 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Fri Oct 31 16:02:42 2008 +0900"
      },
      "message": "sh: Change register name SCSPTR to SCSPTR2\n\nThis change a name of SCSPTR used in sci_rxd_in of SH5-101.\nSCSPTR is not declared and will become the error.\n\nSigned-off-by: Nobuhiro Iwamatsu \u003ciwamatsu.nobuhiro@renesas.com\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "5ff0594e2f6fb3242a1a2a4794286244e95afab1",
      "tree": "4abe79f9b51d77e210dc83a20b2ce74fac41f891",
      "parents": [
        "86d758ef2cb0677b471a88ffe33a29cdfec4ceca"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Tue Oct 28 19:45:47 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Tue Oct 28 19:45:47 2008 +0900"
      },
      "message": "sh: Revert \"SH 7366 needs SCIF_ONLY\"\n\nThis reverts commit 5ca8c4852fcbbc8a8497c4ee8b2a0a7466f3524c.\n\nWith the killing off of SCIF_ONLY and its spawn in sh-sci, we no longer\nrequire this change, so just revert it.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "86d758ef2cb0677b471a88ffe33a29cdfec4ceca",
      "tree": "6c0af4aee6b29fc426faecf827f768ec98b3b00b",
      "parents": [
        "b2d86a3fd9855380598c0c039e712a20086e119f",
        "15c73aaa44e09222e9cccaa9f80e29f7f5351f2b",
        "2a88b6e81589b1d064e03db066feaaa58f6a2d13"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Tue Oct 28 19:44:15 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Tue Oct 28 19:44:15 2008 +0900"
      },
      "message": "Merge branches \u0027sh/serial-rework\u0027 and \u0027sh/oprofile\u0027\n"
    },
    {
      "commit": "5ca8c4852fcbbc8a8497c4ee8b2a0a7466f3524c",
      "tree": "eba3636368f0853138157f4a0cbbc968cd96b5e0",
      "parents": [
        "545727f32049f6e7269f73a49904e3229192988e"
      ],
      "author": {
        "name": "Kuninori Morimoto",
        "email": "morimoto.kuninori@renesas.com",
        "time": "Tue Oct 28 15:33:48 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Tue Oct 28 17:46:24 2008 +0900"
      },
      "message": "SH 7366 needs SCIF_ONLY\n\nSH 7366 has compile bug.\nbecause there is no SCIF_ONLY for SH 7366.\nthis patch add it.\n\nSigned-off-by: Kuninori Morimoto \u003cmorimoto.kuninori@renesas.com\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "ba1d28181c586deec468cc6ae558c0c099f1b956",
      "tree": "488430d14a3886e84a04c10c7e6f3a8a8ed34d7c",
      "parents": [
        "f400f510df4e29bd00ffe07981ec703070cb9e19"
      ],
      "author": {
        "name": "Nobuhiro Iwamatsu",
        "email": "iwamatsu.nobuhiro@renesas.com",
        "time": "Fri Oct 03 17:37:31 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Mon Oct 20 11:46:17 2008 +0900"
      },
      "message": "serial: sh-sci: Add support SCIF of SH7723\n\nSH7723 has two types of SCIF (SCIF and SCIFA).\nThe current sh-sci driver supports only SCIFA, and calculation methods of SCBRR\nare different.\nThis patch support this methods.\n\nSigned-off-by: Nobuhiro Iwamatsu \u003ciwamatsu.nobuhiro@renesas.com\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "15c73aaa44e09222e9cccaa9f80e29f7f5351f2b",
      "tree": "fd94aeaddf91e69f6cbb2213fbc1a87b3db1a085",
      "parents": [
        "bc0f424faa11a2017ba725bb8c5fc481ece7b440"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Thu Oct 02 19:47:12 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Thu Oct 02 19:47:12 2008 +0900"
      },
      "message": "serial: sh-sci: Kill off all of the SCI/SCIF special casing.\n\nThis was added at a time when the compiler did a less than stellar job of\noptimizing out dead code. These days this tends to be less of a concern,\nso kill it all off.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "bc0f424faa11a2017ba725bb8c5fc481ece7b440",
      "tree": "e6272f37806941443f1ead19f965e8eeb531282c",
      "parents": [
        "a2159b52219870553fd67e6456f41cd5225c46c6",
        "225c9a8d1da274bf23efec43ec28b1c9e45e12f8"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Thu Oct 02 19:14:11 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Thu Oct 02 19:14:11 2008 +0900"
      },
      "message": "Merge branch \u0027sh/g3-prep\u0027\n"
    },
    {
      "commit": "a2159b52219870553fd67e6456f41cd5225c46c6",
      "tree": "103c2750b618ca1b91aa0a0e6fad28dffb41a484",
      "parents": [
        "bdeb3be7cc6911477b7169dad62a427d7a263d02"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Thu Oct 02 19:09:13 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Thu Oct 02 19:09:13 2008 +0900"
      },
      "message": "serial: sh-sci: Dynamic clock management depends on HAVE_CLK.\n\nPresently this is conditionalized on sh, and disabled for sh64.\nNow that SH-5 ties in to the clock framework, the sh64 exception\ncan be dropped. Additionally, ARM will want to use the same hooks\nonce SH-Mobile G3 grows clock framework support, so switch these\npaths over to HAVE_CLK now.\n\nOnce the H8 and ARM sh-sci users hook up HAVE_CLK, the driver can\nbe switched over to having an outright dependency on it and the\nifdefs can go away.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "7ff731aeba1cdac473c818a9884eb94ddad18e7f",
      "tree": "ac415594035811fde75bd2963d861a03d0efcb6b",
      "parents": [
        "62429e03644833693e6f94afe537f252e2d3b475"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Oct 01 15:46:58 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Oct 01 15:46:58 2008 +0900"
      },
      "message": "serial: sh-sci: Handle the general UPF_IOREMAP case.\n\nPresently we don\u0027t do much with UPF_IOREMAP other than special case it\nfor SH-5\u0027s onchip_remap() on the early console. Tie this in generically\nfor platforms that need the remap.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "c2697968c012cfdba2d92fa6e27e3e34f918af2f",
      "tree": "3fbd20f1c67ec1a6d077f6da37b01b1622a0f8bb",
      "parents": [
        "c8b5d9dcbc94ae5e7d9ed647246df4454d25332e"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Jul 30 00:56:39 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Jul 30 00:56:39 2008 +0900"
      },
      "message": "serial: sh-sci: Fix up SH7760/SH7780/SH7785 early printk regression.\n\nAs noted by Manuel:\n\n\tCommit c63847a3621d2bac054f5709783860ecabd0ee7e (\"sh: Add\n\tSCIF2 support for SH7763.\") broke build with CONFIG_EARLY_PRINTK\n\tenabled for me (SH7760):\n\n\t  CC      arch/sh/kernel/early_printk.o\n\t/mnt/work/sh7760/kernel/linux-2.6.git/arch/sh/kernel/early_printk.c: In function \u0027scif_sercon_putc\u0027:\n\t/mnt/work/sh7760/kernel/linux-2.6.git/arch/sh/kernel/early_printk.c:84: error: implicit declaration of function \u0027sci_SCFDR_in\u0027\n\nMove the SH7763 definitions out on their own, so they don\u0027t create additional\nconfusion within the SH7760/SH7780/SH7785 block. Restore the deleted\nSCFDR definition for these parts.\n\nReported-by: Manuel Lauss \u003cmano@roarinelk.homelinux.net\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "c63847a3621d2bac054f5709783860ecabd0ee7e",
      "tree": "a04e0aca07d0a672a56b1611544f7d2da0b621e4",
      "parents": [
        "04e917b606ffe6ec10fb75c21447162cba31f6b6"
      ],
      "author": {
        "name": "Nobuhiro Iwamatsu",
        "email": "iwamatsu.nobuhiro@renesas.com",
        "time": "Fri Jun 06 17:04:08 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Mon Jul 28 18:10:29 2008 +0900"
      },
      "message": "sh: Add SCIF2 support for SH7763.\n\nSH7763 has 3 SCIF device. Current code supports SCIF0 and 1.\nSCIF0 and 1 are same register constitution, but only SCIF2 is different.\nI added support of SCIF2.\n\nSigned-off-by: Nobuhiro Iwamatsu \u003ciwamatsu.nobuhiro@renesas.com\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "3d2c2f3ef7c5425d23424326a2345c385bb2d415",
      "tree": "133bb7cb23fb8b8a32f6a2659685d0940794313b",
      "parents": [
        "9b4e466f93c6b614d05139d84a930a55fe4cd781"
      ],
      "author": {
        "name": "Magnus Damm",
        "email": "magnus.damm@gmail.com",
        "time": "Wed Apr 23 21:37:39 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Thu May 08 19:51:59 2008 +0900"
      },
      "message": "sh-sci: avoid writing to nonexistent registers\n\nOnly write to hardware in SCI_OUT() if the register size is valid.\n\nSigned-off-by: Magnus Damm \u003cdamm@igel.co.jp\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "9b4e466f93c6b614d05139d84a930a55fe4cd781",
      "tree": "78efcd898419b317fc5be0d67920bf94da95ab69",
      "parents": [
        "346b746300f470bb4a72b66275d6a43987c5dfa6"
      ],
      "author": {
        "name": "Magnus Damm",
        "email": "magnus.damm@gmail.com",
        "time": "Wed Apr 23 21:31:14 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Thu May 08 19:51:58 2008 +0900"
      },
      "message": "sh-sci: sh7722 lacks scsptr registers\n\nThe sh7722 serial ports all lack SCSPTR registers, so mark them as\nnonexistent in the register table.\n\nSigned-off-by: Magnus Damm \u003cdamm@igel.co.jp\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "346b746300f470bb4a72b66275d6a43987c5dfa6",
      "tree": "3827c877091f8fef576886a96a3fa30dfd368c09",
      "parents": [
        "191d4437b9c028afee1a0568d9c7e6e0b264c703"
      ],
      "author": {
        "name": "Magnus Damm",
        "email": "magnus.damm@gmail.com",
        "time": "Wed Apr 23 21:25:29 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Thu May 08 19:51:57 2008 +0900"
      },
      "message": "sh-sci: improve sh7722 support\n\nImprove sh7722 support for SCIF1 and SCIF2 and separate code\nfrom sh7366 implementation.\n\nSigned-off-by: Magnus Damm \u003cdamm@igel.co.jp\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "178dd0cd28168287a0be6444a7eef8918b6c544e",
      "tree": "c866d61e2c0c744a4bb3ee940b8b4962ed87d369",
      "parents": [
        "47aa8f493f94c6f60ebc5aa70eec90cc83f499f3"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Apr 09 17:56:18 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Fri Apr 18 09:50:07 2008 -0700"
      },
      "message": "sh: Add support for SH7723 CPU subtype.\n\nThis adds basic support for the SH7723 MobileR2 CPU.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "e8ea024bffcc9e4cb0e72cfdf50a99d05fd95d1c",
      "tree": "f33a91caaf6a156bbf98770097c035d27bb4af80",
      "parents": [
        "38350e0a00f973dd9c6556beeff0f7eb5ef3f58b"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Feb 13 20:15:36 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Thu Feb 14 14:22:12 2008 +0900"
      },
      "message": "serial: sh-sci: Fix up SH-5 build.\n\nasm/hardware.h doesn\u0027t exist any more, and the definitions sh-sci.h\ndepended on are provided through asm/cpu/addrspace.h these days.\nKill off the bogus include.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "9109a30e5a548b39463b5a777943cf103da507af",
      "tree": "30c9e05311a3a76acef42ebcc6f00f08cdacd605",
      "parents": [
        "d847afe7d4966d35eb7a6fe6f196a0d7e5633f35"
      ],
      "author": {
        "name": "Magnus Damm",
        "email": "magnus.damm@gmail.com",
        "time": "Fri Feb 08 17:31:24 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Thu Feb 14 14:22:10 2008 +0900"
      },
      "message": "sh: add support for sh7366 processor\n\nThis patch adds sh7366 cpu supports. Just the most basic things like interrupt\ncontroller, clocks and serial port are included at this point.\n\nSigned-off-by: Magnus Damm \u003cdamm@igel.co.jp\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "7d740a066fb9c6681c2898c7977209725c9e552f",
      "tree": "1e883b36c1aa05b5bf509500fec743d676042bed",
      "parents": [
        "0465b9fb5f6b57f00a6f5bf2169e30e8f3c7d66c"
      ],
      "author": {
        "name": "Yoshihiro Shimoda",
        "email": "shimoda.yoshihiro@renesas.com",
        "time": "Mon Jan 07 14:40:07 2008 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Mon Jan 28 13:19:02 2008 +0900"
      },
      "message": "sh: Add support for SH7763 CPU subtype.\n\nSigned-off-by: Yoshihiro Shimoda \u003cshimoda.yoshihiro@renesas.com\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "31a49c4bf8f964b7a9897baa889916d71b51d9c1",
      "tree": "e6c900dfbdf51d97d4c189a712a8c4e1aa059cf4",
      "parents": [
        "52e8b118ecd17185ce514cd3f955094c1d8f4288"
      ],
      "author": {
        "name": "Yoshihiro Shimoda",
        "email": "shimoda.yoshihiro@renesas.com",
        "time": "Wed Dec 26 11:45:06 2007 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Mon Jan 28 13:19:02 2008 +0900"
      },
      "message": "sh: Add support for SH7721 CPU subtype.\n\nSigned-off-by: Yoshihiro Shimoda \u003cshimoda.yoshihiro@renesas.com\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "a8f67f4b4d4b74cd14d3540ade8657ebee543340",
      "tree": "0196ebc52c34d157a86a89d519556f8172d24feb",
      "parents": [
        "47a3eb95560ea525a2dfbee1c4e7f03a45fd2207"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Mon Nov 26 19:54:02 2007 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Mon Jan 28 13:18:57 2008 +0900"
      },
      "message": "sh: Add SH7263 CPU support.\n\nThis adds support for the SH7263 (SH-2A) CPU.\n\nThis particular CPU is a superset of SH7203, adding some additional\nperipheral blocks and hooking up additional (reserved on SH7203)\nvectors in the INTC block.\n\nNo visibly nasty surprises, yet..\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "6d01f51086cf6c475470cdae67d2f45e5fb57833",
      "tree": "f386f7ac91266e7554db20f26af0b287f82b4b5d",
      "parents": [
        "ff1b7506051014cc38036401b89e426bf3d6a608"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Mon Nov 26 18:17:21 2007 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Mon Jan 28 13:18:57 2008 +0900"
      },
      "message": "sh: Add SH7203 CPU support.\n\nThis adds support for the SH7203 (SH-2A) CPU.\n\nSigned-off-by: Kieran Bingham \u003ckbingham@mpc-data.co.uk\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "694caef5e201d43151cc3a31b447e75b2f531de4",
      "tree": "aacebaf71384ac3a12d95373e2b5154dfba45145",
      "parents": [
        "ac11584ccbd14aadcc6613598f3bac4589ea3a11"
      ],
      "author": {
        "name": "Nobuhiro Iwamatsu",
        "email": "iwamatsu@nigauri.org",
        "time": "Wed Nov 07 14:54:32 2007 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Nov 07 14:54:32 2007 +0900"
      },
      "message": "sh: Remove SCI_NPORTS from sh-sci.h\n\nWhen SH7710 and SH7712 are used, SCI_NPORTS redefined.\nRemove it.\n\nSigned-off-by: Nobuhiro Iwamatsu \u003ciwamatsu@nigauri.org\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "f96691872439ab2071171d4531c4a95b5d493ae5",
      "tree": "340a0a5faa7429e9cb579417f8da78b0d6f6aaa2",
      "parents": [
        "07782cec9b444746859855fc310f20f254e995a0"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Nov 07 11:05:32 2007 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Nov 07 11:13:55 2007 +0900"
      },
      "message": "sh: Kill off the remaining ST40 cruft.\n\nThe ST40 stuff in-tree hasn\u0027t built for some time, and hasn\u0027t been\nupdated for over 3 years. ST maintains their own out-of-tree changes\nand rebases occasionally, and that\u0027s ultimately where all of the ST40\nusers go anyways.\n\nIn order for the ST40 code to be brought up to date most of the stuff\nremoved in this changeset would have to be rewritten anyways, so there\u0027s\nvery little benefit in keeping the remnants around either.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "3ea6bc3de4f15fcae84fb31eeea4d420685a3da2",
      "tree": "2b9e37135052aab926b7be0822d024c4ba71c32e",
      "parents": [
        "dfc5ed2a939baf08f9385a8c6249b719cac63665"
      ],
      "author": {
        "name": "Markus Brunner",
        "email": "super.firetwister@gmail.com",
        "time": "Mon Aug 20 08:59:33 2007 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Fri Sep 21 11:57:49 2007 +0900"
      },
      "message": "sh: Add SH7720 CPU support.\n\nThis adds support for the SH7720 (SH3-DSP) CPU.\n\nSigned-off by: Markus Brunner \u003csuper.firetwister@gmail.com\u003e\nSigned-off by: Mark Jonas \u003ctoertel@gmail.com\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "1760b7d760b2804a87affcb8ec74edde8812a1ea",
      "tree": "f277b880a2d52175b88d81b76196e76598afc8e3",
      "parents": [
        "9904494d6a5303f6eebf6fe95a37bf1f952a3f5d"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Aug 08 16:57:05 2007 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Fri Sep 21 11:57:49 2007 +0900"
      },
      "message": "serial: sh-sci: Shut up compiler warning for SH-X3 SCIF.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "d89ddd1c847637d91625c8cb6b0d064e1717057c",
      "tree": "7f2547f112e3cd70e06a190fc26ab701dbab71b9",
      "parents": [
        "32582fa46020cd8940006a8d42dec083d72d6d8b"
      ],
      "author": {
        "name": "Magnus Damm",
        "email": "damm@igel.co.jp",
        "time": "Wed Jul 25 11:42:56 2007 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Thu Jul 26 15:37:57 2007 +0900"
      },
      "message": "sh: remove support for sh7300 and solution engine 7300\n\nThis patch removes old dead code:\n- kill off sh7300 cpu support\n- get rid of broken solution engine 7300 board support\n\nSigned-off-by: Magnus Damm \u003cdamm@igel.co.jp\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "0fbde9509d7b2f71b9326f9c5807a0b4193c7c76",
      "tree": "f6c027713f2607c086760f460831e71ecbd44f3d",
      "parents": [
        "ac79fd58a25dbd9848f2c2857da6a79494dabb9a"
      ],
      "author": {
        "name": "Magnus Damm",
        "email": "damm@igel.co.jp",
        "time": "Thu Jul 26 10:14:16 2007 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Thu Jul 26 15:35:54 2007 +0900"
      },
      "message": "sh: sh-sci - fix SH7708 support\n\nThis patch makes sure the sci serial port driver compiles for sh7708.\nThe approach taken is to treat the sh7708 as a subset of sh7706, sh7707,\nsh7709. sh7708 is very similar to sh7706, sh7707, sh7709, but only\nequipped with a single sci port. The platform data in setup-sh770x.c\nalready limits the number of serial ports for sh7708 to a single one,\nso the non-existing scif ports pointed out in sh-sci.h will remain\nunused in case of sh7708.\n\nSigned-off-by: Magnus Damm \u003cdamm@igel.co.jp\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "870e8a24380cf1854dc1bb5fa5abebb44d82674b",
      "tree": "67f5e33c93eefb862eb2be092044ca5b12c59193",
      "parents": [
        "347b9bdddbc38cfd46c27b3345e7facf651ecb92"
      ],
      "author": {
        "name": "Magnus Damm",
        "email": "damm@igel.co.jp",
        "time": "Wed Jul 25 10:49:21 2007 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Jul 25 10:49:21 2007 +0900"
      },
      "message": "sh: remove support for sh73180 and solution engine 73180\n\nThis patch removes old dead code:\n- kill off sh73180 cpu support\n- get rid of broken solution engine 73180 board support\n\nSigned-off-by: Magnus Damm \u003cdamm@igel.co.jp\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "2b1bd1ac5d4bffe3fd542bfe1784a583bd7df4fa",
      "tree": "9c9840807d84cb4d9ca981fbae5093eef1c9ed12",
      "parents": [
        "027e56e68543780870fda74360ca45e392c50e1c"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Jun 20 18:27:10 2007 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Jun 20 18:27:10 2007 +0900"
      },
      "message": "sh: Preliminary support for the SH-X3 CPU.\n\nThis adds basic support for UP SH-X3.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "05627486ab7f31ea09d8bb7a83582ca0185dc283",
      "tree": "79189f3118568cff90b374d433de0ea2c8b2fe1f",
      "parents": [
        "fd8f20e8e2f8f1d9201086bff444c8d35f0a6a45"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Tue May 15 16:25:47 2007 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@hera.kernel.org",
        "time": "Fri Jun 08 02:43:40 2007 +0000"
      },
      "message": "sh: Fix SH-4 CPU selects.\n\nNow that select no longer works for selecting the \"closest\" CPU,\nwe have to explicitly reference the precise sub-type in the few\nplaces where it actually matters (presently only setup code and\nsome legacy sh-sci cruft).\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "9465a54fa4a9da628091c372baa84120f8304587",
      "tree": "ef34abf9debce228b0985e0fb783ca46939e626a",
      "parents": [
        "c86c5a910451dd5a30e62a9e36d8e9b3c7a0c1d1"
      ],
      "author": {
        "name": "Nobuhiro Iwamatsu",
        "email": "iwamatsu@nigauri.org",
        "time": "Tue Mar 27 18:13:51 2007 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@hera.kernel.org",
        "time": "Mon May 07 02:10:54 2007 +0000"
      },
      "message": "sh: MS7712SE01 board support.\n\nSupport the SH7712 (SH3-DSP) Solution Engine reference board.\n\nSigned-off-by: Nobuhiro Iwamatsu \u003ciwamatsu@nigauri.org\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "32351a28a7e1f2c68afbe559dd35e1ad0301be6d",
      "tree": "289c28c605da6876125fa2105d880860b88b5017",
      "parents": [
        "be782df54c51b50dd4dbc363a5a5afa04565fc60"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Mon Mar 12 14:38:59 2007 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@hera.kernel.org",
        "time": "Mon May 07 02:10:53 2007 +0000"
      },
      "message": "sh: Add SH7785 Highlander board support (R7785RP).\n\nThis adds preliminary support for the SH7785-based Highlander board.\nSome of the Highlander support code is reordered so that most of it\ncan be reused directly.\n\nThis also plugs in missing SH7785 checks in the places that need it,\nas this is the first board to support the CPU.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "41504c39726a7099e5a42508dd57fe561c8b4129",
      "tree": "29e3ea77a973fc7ee137e78a03b2b6c24b99d559",
      "parents": [
        "5432143464ee7f5cb8b0b015a0fd1c3279af10ae"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Mon Dec 11 20:28:03 2006 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Tue Dec 12 08:42:09 2006 +0900"
      },
      "message": "sh: SH-MobileR SH7722 CPU support.\n\nThis adds CPU support for the SH7722.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "313887507f8ab9240d7b409c9e5ef2c75ac8e1fc",
      "tree": "aba0f9717aff9eb9912b6767b4be0c76165b49db",
      "parents": [
        "ec723fbe7e19f5a66cea183bca7ca20675631a7a"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Fri Dec 08 14:26:19 2006 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Tue Dec 12 08:42:08 2006 +0900"
      },
      "message": "serial: sh-sci: Shut up various sci_rxd_in() gcc4 warnings.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "6fc21b82ef74911887ced1aff8d37ce079bb8b36",
      "tree": "7accfcb402a530dcddb4d755f413e8098037801f",
      "parents": [
        "510c72ad2dd4e05e6908755f51ac89482c6eb987"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Mon Nov 27 12:10:23 2006 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Dec 06 10:45:39 2006 +0900"
      },
      "message": "sh: More flexible + SH7780 earlyprintk SCIF support.\n\nThis makes the early printk support somewhat more flexible,\nmoving the port definition to a config option, and making the\nport initialization configurable for sh-ipl+g users.\n\nAt the same time, this allows us to trivially wire up the\nSH7780 SCIF0, so that\u0027s thrown in too more or less for free.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "9d4436a6fbc8c5eccdfcb8f5884e0a7b4a57f6d2",
      "tree": "a8b7532fffa76ae526dea547cc87200466e00842",
      "parents": [
        "e62438630ca37539c8cc1553710bbfaa3cf960a7"
      ],
      "author": {
        "name": "Yoshinori Sato",
        "email": "ysato@users.sourceforge.jp",
        "time": "Sun Nov 05 15:40:13 2006 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Dec 06 10:45:36 2006 +0900"
      },
      "message": "sh: Add support for SH7206 and SH7619 CPU subtypes.\n\nThis implements initial support for the SH7206 (SH-2A) and SH7619\n(SH-2) MMU-less CPUs.\n\nSigned-off-by: Yoshinori Sato \u003cysato@users.sourceforge.jp\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "038b0a6d8d32db934bba6a24e74e76e4e327a94f",
      "tree": "5fbeb3e8f140e20f8ce0e33e12b32ec5b0724cd6",
      "parents": [
        "78b656b8bf933101b42409b4492734b23427bfc3"
      ],
      "author": {
        "name": "Dave Jones",
        "email": "davej@redhat.com",
        "time": "Wed Oct 04 03:38:54 2006 -0400"
      },
      "committer": {
        "name": "Dave Jones",
        "email": "davej@redhat.com",
        "time": "Wed Oct 04 03:38:54 2006 -0400"
      },
      "message": "Remove all inclusions of \u003clinux/config.h\u003e\nkbuild explicitly includes this at build time.\n\nSigned-off-by: Dave Jones \u003cdavej@redhat.com\u003e\n"
    },
    {
      "commit": "e108b2ca2349f510ce7d7f910eda89f71d710d84",
      "tree": "b7724e3c2edd0157da9b66d50898fd6c741a61dd",
      "parents": [
        "56e8d7b5786dc2f7d1f701500f8914fd2c52b111"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Sep 27 16:32:13 2006 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Sep 27 16:32:13 2006 +0900"
      },
      "message": "serial: Rework sh-sci for driver model.\n\nsh-sci was turning in to an unmaintainable mess, especially with\nregards to the port list. This cleans it up quite a bit, and\nswitches over to a platform device model where subtypes will\nregister their port list individually in their setup code.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "6ab3d5624e172c553004ecc862bfeac16d9d68b7",
      "tree": "6d98881fe91fd9583c109208d5c27131b93fa248",
      "parents": [
        "e02169b682bc448ccdc819dc8639ed34a23cedd8"
      ],
      "author": {
        "name": "Jörn Engel",
        "email": "joern@wohnheim.fh-wedel.de",
        "time": "Fri Jun 30 19:25:36 2006 +0200"
      },
      "committer": {
        "name": "Adrian Bunk",
        "email": "bunk@stusta.de",
        "time": "Fri Jun 30 19:25:36 2006 +0200"
      },
      "message": "Remove obsolete #include \u003clinux/config.h\u003e\n\nSigned-off-by: Jörn Engel \u003cjoern@wohnheim.fh-wedel.de\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\n"
    },
    {
      "commit": "b7a76e4b4e212ec0829f3a7243064511d62cb6da",
      "tree": "37a4be476a1a85a119131f88bc637e2628b1a75d",
      "parents": [
        "37cc7943788c841b03a48c00751dfac0ad9f5b12"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Feb 01 03:06:06 2006 -0800"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Wed Feb 01 08:53:20 2006 -0800"
      },
      "message": "[PATCH] sh: sh-sci clock framework updates\n\nA couple of updates for the sh-sci serial driver:\n\n\t- Update for clock framework on sh.\n\t- Fix a compile error introduced by some h8300 changes.\n\t- Add SH7770/SH7780 subtype support.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
      "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d",
      "parents": [],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n"
    }
  ]
}