)]}' { "log": [ { "commit": "663fcafd977f13e6483f7d4cf2ccdbc4fae81ed0", "tree": "b1c74fe389dff24d94c95eaeb3a52932f6671007", "parents": [ "4bd530f3ab51c7d656bca29d927a50e5aa87175e" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Sep 30 21:06:09 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 05 13:35:23 2010 -0400" }, "message": "cfg80211/mac80211: allow management frame TX in AP mode\n\nEnable management frame transmission and subscribing\nto management frames through nl80211 in both cfg80211\nand mac80211. Also update a few places that I forgot\nto update for P2P-client mode previously, and fix a\nsmall bug with non-action frames in this API.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4bd530f3ab51c7d656bca29d927a50e5aa87175e", "tree": "97b979a8e1b5e2d60e4b6ac97fabdfd642a6cfb7", "parents": [ "e32ee80b855914e48b1beb53e13203bc874288d8" ], "author": { "name": "Stanislaw Gruszka", "email": "sgruszka@redhat.com", "time": "Thu Sep 30 16:27:35 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 05 13:35:22 2010 -0400" }, "message": "iwlwifi: change WARN_ON to IWL_WARN in iwl_mac_add_interface\n\nWe can start restarting firmware or RF kill switch can be turned on\nduring call to iwl_mac_add_interface(). That are normal working\nconditions, so do not print call trace, just print simple message\ninstead.\n\nSigned-off-by: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e32ee80b855914e48b1beb53e13203bc874288d8", "tree": "fdcdf05a6571651fdec57c863126f8bca9e2fb06", "parents": [ "39162dbe813a2c90b7b9018a74dc1befb9ff4205" ], "author": { "name": "Ben Hutchings", "email": "ben@decadent.org.uk", "time": "Thu Sep 30 02:44:56 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 05 13:35:22 2010 -0400" }, "message": "ar9170: Remove MODULE_FIRMWARE references to two-stage firmware\n\nThe combined firmware ar9170.fw is preferred and supports all devices.\nReferences to the older two-stage firmware are unnecessary.\n\nSigned-off-by: Ben Hutchings \u003cben@decadent.org.uk\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "39162dbe813a2c90b7b9018a74dc1befb9ff4205", "tree": "10bd788a67a55e4eb32bf8627a94351b6b39a975", "parents": [ "17e5a8082894a4b66cb69e7ec16074f0f01281e1" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 29 19:12:06 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 05 13:35:22 2010 -0400" }, "message": "ath9k: return survey data for all channels instead of just the current one\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "17e5a8082894a4b66cb69e7ec16074f0f01281e1", "tree": "604746f9c4aa8d77c41f1e22e9f553b5cdcfa823", "parents": [ "0bda652300dff8136c9d889f1133462c7c7d332c" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 29 17:15:30 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 05 13:35:22 2010 -0400" }, "message": "nl80211: allow drivers to indicate whether the survey data channel is in use\n\nSome user space applications only want to display survey data for\nthe operating channel, however there is no API to get that yet.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0bda652300dff8136c9d889f1133462c7c7d332c", "tree": "05eae912871256e965e4e9419ed28b2c61d7eebf", "parents": [ "4f1a5a4b62c5335aafd5830866320c8918103a3a" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 29 17:15:29 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 05 13:35:22 2010 -0400" }, "message": "ath9k: remove the noise floor value in the ani struct\n\ncommon-\u003eani.noise_floor is now only used for a similar redundant debug\nmessage similar to the one that was removed from ath9k_htc in an earlier\npatch. Remove it from ath9k as well now.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4f1a5a4b62c5335aafd5830866320c8918103a3a", "tree": "0a48a03e76b90a75ce380de8ab1508f78c855429", "parents": [ "d9891c7804f27c5b0ea9eb51f42bf473b24338a0" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 29 17:15:28 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 05 13:35:22 2010 -0400" }, "message": "ath9k: do not return default noise floor values via survey\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d9891c7804f27c5b0ea9eb51f42bf473b24338a0", "tree": "02cf0c0ba96c1a9763d5720cc68c8e6a0926c54f", "parents": [ "35ecfe03d96b7cdaf6e50aba13af37e2c99deb57" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 29 17:15:27 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 05 13:35:21 2010 -0400" }, "message": "ath9k_hw: keep calibrated noise floor values per channel\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "35ecfe03d96b7cdaf6e50aba13af37e2c99deb57", "tree": "4976c480f2a99bf829fccb805588560c2034300a", "parents": [ "5c895691944862e782c285a871f5d3466797b4ef" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 29 17:15:26 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 05 13:35:21 2010 -0400" }, "message": "ath9k_htc: remove use of common-\u003eani.noise_floor\n\nIt is unused aside from a single redundant debug message\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5c895691944862e782c285a871f5d3466797b4ef", "tree": "7d49f76b23d23253b2c54a1794beb0676c66c615", "parents": [ "85416a4fa193754ef36e12b20bb02fe661cb7f17" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Tue Sep 28 23:00:59 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 05 13:35:21 2010 -0400" }, "message": "carl9170: support firmware-based rx filter\n\nThe hardware rx-filter was essentially disabled, because\nof a serve, yet unidentifiable problem with iwlagn.\nDue to these circumstances the driver and mac80211 were\nleft with the job of filtering.\n\nThis is very unfortunate and has proven to be expensive\nin terms of latency, memory and load.\n\nTherefore the new 1.8.8.3 firmware introduces a flexible\nfiltering infrastructure which allows the driver to\noffload some of the checks (FCS \u0026 PLCP crc check,\nRA match, control frame filter, etc...) whenever possible.\n\nNote:\nThis patch also includes all changes to the\nshared headers files since the inclusion.\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "85416a4fa193754ef36e12b20bb02fe661cb7f17", "tree": "45228e888bd76a5f1251c55ea28377ddedfe2914", "parents": [ "5a254ffe3ffdfa84fe076009bd8e88da412180d2" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Sat Oct 02 13:17:07 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 05 13:35:21 2010 -0400" }, "message": "mac80211: fix rx monitor filter refcounters\n\nThis patch fixes an refcounting bug. Previously it\nwas possible to corrupt the per-device recv. filter\nand monitor management counters when:\n\tiw dev wlanX set monitor [new flags]\nwas issued on an active monitor interface.\n\nAcked-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5a254ffe3ffdfa84fe076009bd8e88da412180d2", "tree": "31e2263807b442d507d98d7d5b1c53bf0b0702c2", "parents": [ "b1a9338d5eaa9c38c326e20ce339247f4d585b62" ], "author": { "name": "Ben Greear", "email": "greearb@candelatech.com", "time": "Mon Sep 27 09:07:26 2010 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 05 13:35:21 2010 -0400" }, "message": "wireless: Use first phyX name available when registering phy devices.\n\nChoose first available phyX name when creating phy devices. This\nmeans that reloading a wifi driver will not cause a change in the\nname of it\u0027s phy device.\n\nAlso, allow users to rename a phy to any un-used name, including\nphy%d.\n\nSigned-off-by: Ben Greear \u003cgreearb@candelatech.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b1a9338d5eaa9c38c326e20ce339247f4d585b62", "tree": "d2e48e2120e96c4427a5d6897312c15a0111c429", "parents": [ "1728943d83e9fd919e454332fe344944123b3c3a", "62cb3c6ac47a5ab7d8c67dbbf8cbdcd5ae735410" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 05 11:14:58 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 05 11:14:58 2010 -0400" }, "message": "Merge branch \u0027wireless-next-2.6\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6\n" }, { "commit": "62cb3c6ac47a5ab7d8c67dbbf8cbdcd5ae735410", "tree": "0ae77dc3c53079c681a39f4b08a9c59ce7fd46cf", "parents": [ "6d6a1afdc591e3f3ee66c39206923def43044ab6" ], "author": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Tue Sep 28 17:43:10 2010 -0700" }, "committer": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Tue Sep 28 17:43:10 2010 -0700" }, "message": "iwlagn: API v5 for 6050 series device\n\nFor 6050 series device, change the supported API version\n\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\n" }, { "commit": "6d6a1afdc591e3f3ee66c39206923def43044ab6", "tree": "82246979540a799303e417ba117eeae06e066bb5", "parents": [ "02796d77cb4cfb64b9465eabbdb13b3b7d1679e9" ], "author": { "name": "Shanyu Zhao", "email": "shanyu.zhao@intel.com", "time": "Tue Sep 14 18:13:31 2010 -0700" }, "committer": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Tue Sep 28 16:57:06 2010 -0700" }, "message": "iwlwifi: send DC calib config to runtime ucode\n\nSince uCode is responsible for doing DC calibration, there\u0027s no need\nto let init uCode to do initial DC calibration then send results\nback to driver, then driver sends the results to runtime uCode.\nDriver can simply tell runtime uCode to do DC calibration.\n\nActually, this patch does not disable DC calib for init uCode. It just\nprevent driver from saving and sending the DC calib results (from init\nucode) to runtime uCode. The driver still uses 0xffffffff in\nCALIB_CFG_CMD for init ucode.\n\nSigned-off-by: Shanyu Zhao \u003cshanyu.zhao@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\n" }, { "commit": "02796d77cb4cfb64b9465eabbdb13b3b7d1679e9", "tree": "0060b46962eaf1255f3b1eaac1d65bf78cba8876", "parents": [ "6b5ce501428942d9dec864a41ee223307f421574" ], "author": { "name": "Shanyu Zhao", "email": "shanyu.zhao@intel.com", "time": "Tue Sep 14 16:23:42 2010 -0700" }, "committer": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Tue Sep 28 16:56:03 2010 -0700" }, "message": "iwlagn: set CSR register for 6050g2 devices\n\nFor 6050g2 devices driver needs to set a special bit to CSR register\nso that uCode can do things correctly in calibration routines.\n\nSigned-off-by: Shanyu Zhao \u003cshanyu.zhao@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\n" }, { "commit": "6b5ce501428942d9dec864a41ee223307f421574", "tree": "f580aedb17b6df2710523da1778a5dd2a33f08b3", "parents": [ "1de19eccb3fe634e939cb40f30fdfda93a67fe93" ], "author": { "name": "Shanyu Zhao", "email": "shanyu.zhao@intel.com", "time": "Tue Sep 14 16:23:32 2010 -0700" }, "committer": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Tue Sep 28 16:55:25 2010 -0700" }, "message": "iwlwifi: add iwl_nic_ops structure to iwl_ops\n\niwlwifi driver supports multiple devices. Since some device needs\nspecial configuration we create a new iwl_nic_ops structure which is\nconfigurable per device. Currently there is only one function pointer\ninside this structure: additional_nic_config().\n\nThe iwl_nic_ops structure is added to the top level in struct iwl_ops,\nmaking it easier to change per device. Duplication of the iwl_lib_ops\nstructure is no longer needed.\n\nWith this new ops the previous function pointer set_calib_version is\nno longer needed since it is just a per device nic configuration.\n\nAs part of the code restructuring, a bug is addressed. Indication of\ncalib version to uCode is only needed for 6050 devices, however,\ncurrent implementation set calib version for all 6000 devices for\nwhich DC calib is needed. To fix this, create iwl6050_ops for 6050\ndevices and only populate iwl_nic_ops in this structure.\n\nSigned-off-by: Shanyu Zhao \u003cshanyu.zhao@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\n" }, { "commit": "1de19eccb3fe634e939cb40f30fdfda93a67fe93", "tree": "915d5117dfe7d338cfeefb653dea23eaceadfaf1", "parents": [ "6e5c2b4e8addfaab8ef54dedaf7b607e1585c35b" ], "author": { "name": "Jay Sternberg", "email": "jay.e.sternberg@intel.com", "time": "Tue Sep 14 15:21:20 2010 -0700" }, "committer": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Tue Sep 28 16:52:35 2010 -0700" }, "message": "iwlwifi: define 100 devices\n\nadd new structures and defines need to identify 100 devices.\n\nSigned-off-by: Jay Sternberg \u003cjay.e.sternberg@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\n" }, { "commit": "1728943d83e9fd919e454332fe344944123b3c3a", "tree": "76c42bde578332499d3fb77f5cdd110041476cee", "parents": [ "f2176d7240e4f455a6e007703c7512fbde926dc8", "e7ee762cf074b0fd8eec483d0cef8fdbf0d04b81" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 28 16:01:47 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 28 16:01:47 2010 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n\nConflicts:\n\tdrivers/net/wireless/iwlwifi/iwl-agn-lib.c\n\tdrivers/net/wireless/iwlwifi/iwl3945-base.c\n" }, { "commit": "f2176d7240e4f455a6e007703c7512fbde926dc8", "tree": "76c42bde578332499d3fb77f5cdd110041476cee", "parents": [ "93b05238027420978d785569f8c1aa4a6867bc13" ], "author": { "name": "Juuso Oikarinen", "email": "juuso.oikarinen@nokia.com", "time": "Tue Sep 28 14:39:32 2010 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 28 15:47:58 2010 -0400" }, "message": "mac80211: Fix WMM driver queue configuration\n\nThe WMM parameter configuration function (ieee80211_sta_wmm_params) only\nconfigures the WMM parameters to the driver is the wmm_last_param_set\ncounter value is changed by the AP.\n\nThe wmm_last_param_set is initialized to -1 on association in order to ensure\nthe configuration is made to the driver at least once on association, but\ncurrently this initialization is done *after* the WMM parameter configuration\nfunction was called.\n\nThis leads to unreliability in the driver getting properly configured on first\nassociation (depending on what counter value the AP happens to use.) When\ndisassociating (the wmm default parameters are configured to the driver) and\nthen reassociating, due to the above the WMM configuration is not set to the\ndriver at all.\n\nOn drivers without beacon filtering the problem is corrected by later beacons,\nbut on drivers with beacon filtering the WMM will remain permanently incorrectly\nconfigured.\n\nFix this by moving the initialization of wmm_last_param_set to -1 before\nieee80211_sta_wmm_params is called on association.\n\nSigned-off-by: Juuso Oikarinen \u003cjuuso.oikarinen@nokia.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "93b05238027420978d785569f8c1aa4a6867bc13", "tree": "8f391a9ea2438ed986d36b937fdbaf902e486187", "parents": [ "dc4769f0bb949e312ad8d9b652047ff6709978c2" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Sep 28 12:53:14 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 28 15:47:58 2010 -0400" }, "message": "cfg80211: always set IBSS basic rates\n\nIBSS started from wireless extensions is currently\nmissing basic rate configuration, fix this by moving\nthe code to generate the default to the common code\nthat gets invoked for both nl80211 and wext.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "dc4769f0bb949e312ad8d9b652047ff6709978c2", "tree": "19f7c3192c1838e3a6cc6b3744c1ec1f50617d20", "parents": [ "eada7cad6005006b457f10a4c3e1881ff99d03a4" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Tue Sep 28 01:53:42 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 28 15:47:58 2010 -0400" }, "message": "carl9170: interrupt urbs must not set URB_ZERO_PACKET\n\nThis patch fixes a bug in the driver which was\nexposed by CONFIG_USB_DEBUG:\n\t\"usb 1-1.6.3: BOGUS urb flags, 40 --\u003e 0\"\n\nThe transfer flag \"URB_ZERO_PACKET\" is only valid\nfor bulk urbs.\n\nReported-by: André Erdmann\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "eada7cad6005006b457f10a4c3e1881ff99d03a4", "tree": "5421051eab821b184a9b3ec1c5caa8ae86a0db7d", "parents": [ "28df897a42aa41d6318be5b9872c4bb5c8d8d7e3" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Mon Sep 27 13:02:40 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 28 15:47:57 2010 -0400" }, "message": "ath5k: Fix bitmasks and typos for PCU Diagnostic register\n\nAs reported by Ryan Niemi, some bitmasks in the register definition for the PCU\nDiagnostic register (DIAG_SW) were missing a zero at the end. While at it fix\nsome typos and add more comments.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "28df897a42aa41d6318be5b9872c4bb5c8d8d7e3", "tree": "7979dd5d8a894603389e42b513e6e19c4a6601ae", "parents": [ "11f21df36cbcffbfada9307e809d4372ece27f47" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Mon Sep 27 12:22:32 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 28 15:47:57 2010 -0400" }, "message": "ath5k: Disable interrupts in ath5k_hw_get_tsf64\n\nThe code in ath5k_hw_get_tsf64() is time critical and will return wrong results\nif we get interrupted, so disable local interrupts.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "11f21df36cbcffbfada9307e809d4372ece27f47", "tree": "1df7fe45a85f595f965a56a26db1db621b948a14", "parents": [ "7f896126017830b29cf501d246ee32b81e359acd" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Mon Sep 27 12:22:26 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 28 15:47:57 2010 -0400" }, "message": "ath5k: Increase \"fudge\" for beacon timers\n\nWe use FUDGE to make sure the next TBTT is ahead of the current TU.\nSince we later substract AR5K_TUNE_SW_BEACON_RESP (10) in the timer\nconfiguration we need to make sure it is bigger than that.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7f896126017830b29cf501d246ee32b81e359acd", "tree": "c7c1444a291fffb91ef96c6cae281f821c8ff8d0", "parents": [ "4a79f2c517cce31c3b25aab0ec5078368b22c363" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Mon Sep 27 12:22:21 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 28 15:47:57 2010 -0400" }, "message": "ath5k: Check and fix ATIM window\n\nThis patch adds sanity-checks for the beacon timers and especially the ATIM\nwindow to ath5k. It is basically the same what i did for madwifi two years ago\nand fixes a problem in IBSS mode which has been described as \"ramping\" pings.\n\nSee the code comments for a more detailed description and these links:\n\nhttp://madwifi-project.org/ticket/1154\nhttp://madwifi-project.org/changeset/3867\nhttp://thread.gmane.org/gmane.linux.drivers.madwifi.devel/6066\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4a79f2c517cce31c3b25aab0ec5078368b22c363", "tree": "50384f2b0158cd4684a057ed51700f953656b9a1", "parents": [ "4bd437ea40b81fb4c047034de6dca1b5af496fb0" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Mon Sep 27 12:22:16 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 28 15:47:57 2010 -0400" }, "message": "ath5k: Remove unused variable for atim window\n\nIt\u0027s not used and it\u0027s unlikely we will ever implement ATIM.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4bd437ea40b81fb4c047034de6dca1b5af496fb0", "tree": "3d002763f892f45437f63d89f93a6b48e2b8d689", "parents": [ "9c655c8be9053a65886ac3e06420399a9bfdbd70" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Mon Sep 27 01:36:38 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 28 15:47:56 2010 -0400" }, "message": "carl9170: revamp carl9170_tx_prepare\n\nDavid Miller complained about the driver\u0027s excessive use\nof variables in __packed structs. While I did not fully\nagree with his sole \"performance\" argument on all accounts.\nI do see some room for improvement in hot-paths on\narchitectures without an efficient access to unaligned\nelements.\n\nThis first patch (dare I say?) optimizes an important tx\nhot-path in the driver: carl9170_tx_prepare.\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9c655c8be9053a65886ac3e06420399a9bfdbd70", "tree": "da88dbc4b5b3e3e15c004a33aae5a4fc60e55fc4", "parents": [ "cb139ecc0c030e8ccc736bd86cfef502c200825a" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Sun Sep 26 23:06:56 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 28 15:47:56 2010 -0400" }, "message": "carl9170: fix WARN_ON triggered by Broadcom HT STAs\n\nBroadcom\u0027s Windows driver for the 4313 advertises\nan ampdu density of 7 \u003d\u003e 16 us. The AR9170 MAC on\nthe other hand only supports densities up to 8 us.\n\nThis patch removes the noisy WARN_ON, because\nthere is nothing we can do about it.\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cb139ecc0c030e8ccc736bd86cfef502c200825a", "tree": "9d7a09f50e584d7f75689840bf7e78c941e80c07", "parents": [ "042c53f6e84896701b67012ad525bc44ea6de25f" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Sun Sep 26 22:49:34 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 28 15:47:56 2010 -0400" }, "message": "carl9170: fix tx_ampdu_upload counter\n\ntx_ampdu_upload was not decreased when an a-MPDU\nframe had to be kicked out from the tx_pending\nqueues.\n\nThis broke ampdu aggregation, because the scheduler\nwaits until tx_ampdu_upload drops to zero, before\nmaking the next aggregate.\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "042c53f6e84896701b67012ad525bc44ea6de25f", "tree": "fa31ace6edd65ea3c7623b60718d50d5daa3a40f", "parents": [ "b4c85d459c3a2c539a2d5885b12372e404bafc6b" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Sun Sep 26 21:48:31 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 28 15:47:56 2010 -0400" }, "message": "carl9170: remove lost-frame workaround\n\nThis patch removes some cruft, which survived\nthe RFC review phase.\n\nOriginally, carl9170_tx_ampdu_queue erroneously\ndropped a lot of frames. As a result the ampdu\nscheduler bogged down quite frequently and the\naffected BA session timed out.\n\nHowever this bug has been fixed and the WA and\nits debugfs counter is no longer useful.\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b4c85d459c3a2c539a2d5885b12372e404bafc6b", "tree": "3ff9c3f1ed5bf0b2ee1bcd26f7c2c300eacdff06", "parents": [ "793e721d21fd7d2825e3b7e56ff5009ec6d052e9" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Sun Sep 26 21:40:40 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 28 15:47:56 2010 -0400" }, "message": "carl9170: angle brackets for wiki link\n\n\"The convention seems to be angle brackets around\nURLS in Kconfig.\"\n -- Finn Thain (to update web addresses in the kernel)\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "793e721d21fd7d2825e3b7e56ff5009ec6d052e9", "tree": "7f80586b836e8d9859ffdb70ae435559497dca7a", "parents": [ "8d4780eb1ece4e8109b4f6b2e5e61f7fc593c3f4" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Sun Sep 26 21:28:51 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 28 15:47:55 2010 -0400" }, "message": "carl9170: remove non-standard ba session teardown\n\n802.11n-2009 demands in 11.2.1: \"\nWhen a STA enters normal (non-APSD) PS mode, any downlink\nBlock ACK agreement without an associated schedule is\nsuspended for the duration of this PS mode.\"\n\nThe operative word is \"suspended\" and not terminated.\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8d4780eb1ece4e8109b4f6b2e5e61f7fc593c3f4", "tree": "4d68c0dea0d852cddc64e0d65a2d303c918c0e6d", "parents": [ "d99bf6e707444af4df294f54a679f679018d7ec3" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Fri Sep 24 21:59:57 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 28 15:47:55 2010 -0400" }, "message": "mac80211: fix offchannel assumption upon association\n\nAssociation is dealt with as an atomic offchannel operation,\nwe do this because we don\u0027t know we are associated until we\nget the associatin response from the AP. When we do get the\nassociatin response though we were never clearing the offchannel\nstate. This has a few implications, we told drivers we were\nstill offchannel, and the first configured TX power for the\nchannel does not take into account any power constraints.\n\nFor ath9k this meant ANI calibration would not start upon\nassociation, and we\u0027d have to wait until the first bgscan\nto be triggered. There may be other issues this resolves\nbut I\u0027m too lazy to comb the code to check.\n\nCc: stable@kernel.org\nCc: Amod Bodas \u003camod.bodas@atheros.com\u003e\nCc: Vasanth Thiagarajan \u003cvasanth.thiagarajan@atheros.com\u003e\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e7ee762cf074b0fd8eec483d0cef8fdbf0d04b81", "tree": "e37c30da97ba7733c7371e358246786f2736bfc9", "parents": [ "cd87a2d3a33d75a646f1aa1aa2ee5bf712d6f963" ], "author": { "name": "Florian Mickler", "email": "florian@mickler.org", "time": "Fri Sep 24 18:22:01 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 28 15:31:25 2010 -0400" }, "message": "iwl3945: queue the right work if the scan needs to be aborted\n\niwl3945\u0027s scan_completed calls into the mac80211 stack which triggers a\nwarn on if there is no scan outstanding.\n\nThis can be avoided by not calling scan_completed but abort_scan in\niwl3945_request_scan in the done: branch of the function which is used\nas an error out.\n\nThe done: branch seems to be an error-out branch, as, for example, if\niwl_is_ready(priv) returns false the done: branch is executed.\n\nNOTE:\nI\u0027m not familiar with the driver at all.\nI just quickly scanned as a reaction to\n\nhttps://bugzilla.kernel.org/show_bug.cgi?id\u003d17722\n\nthe users of scan_completed in the iwl3945 driver and noted the odd\ndiscrepancy between the comment above this instance and the comment in\nmac80211 scan_completed function.\n\nSigned-off-by: Florian Mickler \u003cflorian@mickler.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d99bf6e707444af4df294f54a679f679018d7ec3", "tree": "cb19ac2e943f22e6e8ff92fcd66ab97d52335458", "parents": [ "e2b626248b0799bd14be40ce290c6681a8419512" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 27 14:00:51 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 28 10:52:26 2010 -0400" }, "message": "wl12xx: fix separate-object-folder builds\n\nMake this go away (happens when building with a separate object\ndirectory):\n\nAssembler messages:\nFatal error: can\u0027t create drivers/net/wireless/wl12xx/.tmp_wl12xx_platform_data.o: No such file or directory\ndrivers/net/wireless/wl12xx/wl12xx_platform_data.c: In function \u0027wl12xx_get_platform_data\u0027:\ndrivers/net/wireless/wl12xx/wl12xx_platform_data.c:28: error: cannot open drivers/net/wireless/wl12xx/.tmp_wl12xx_platform_data.gcno\ndrivers/net/wireless/wl12xx/wl12xx_platform_data.c:28: confused by earlier errors, bailing out\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nReported-by: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\nCc: Signed-off-by: Ohad Ben-Cohen \u003cohad@wizery.com\u003e\n" }, { "commit": "e2b626248b0799bd14be40ce290c6681a8419512", "tree": "8e66524373c8057c7cd2c34fe00ef015d10f8427", "parents": [ "554891e63a29af35cc6bb403ef34e319518114d0" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanoharan@atheros.com", "time": "Fri Sep 24 17:58:50 2010 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 27 15:57:56 2010 -0400" }, "message": "ath9k_htc: Fix TKIP disconnect failure with HTC drivers\n\nThe following commit removed splitmic. But forgot to add\nATH_CRYPT_CAP_MIC_COMBINED flag for HTC drivers which causes\nTKIP to fail.\n\nAuthor: Bruno Randolf \u003cbr1@einfach.org\u003e\nDate: Wed Sep 8 16:04:54 2010 +0900\n\n ath/ath9k: Replace common-\u003esplitmic with a flag\n\n Replace common-\u003esplitmic with ATH_CRYPT_CAP_MIC_COMBINED flag.\n\nSigned-off-by: Rajkumar Manoharan \u003crmanoharan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "554891e63a29af35cc6bb403ef34e319518114d0", "tree": "2fdabf08455ea34697a853b3616cb92d9ef5b173", "parents": [ "4080c7cdc23f26c6e6166a70f50fa43814552d81" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Sep 24 12:38:25 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 27 15:57:54 2010 -0400" }, "message": "mac80211: move packet flags into packet\n\ncommit 8c0c709eea5cbab97fb464cd68b06f24acc58ee1\nAuthor: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nDate: Wed Nov 25 17:46:15 2009 +0100\n\n mac80211: move cmntr flag out of rx flags\n\nmoved the CMNTR flag into the skb RX flags for\nsome aggregation cleanups, but this was wrong\nsince the optimisation this flag tried to make\nrequires that it is kept across the processing\nof multiple interfaces -- which isn\u0027t true for\nflags in the skb. The patch not only broke the\noptimisation, it also introduced a bug: under\nsome (common!) circumstances the flag will be\nset on an already freed skb!\n\nHowever, investigating this in more detail, I\nfound that most of the flags that we set should\nbe per packet, _except_ for this one, due to\na-MPDU processing. Additionally, the flags used\nfor processing (currently just this one) need\nto be reset before processing a new packet.\n\nSince we haven\u0027t actually seen bugs reported as\na result of the wrong flags handling (which is\nnot too surprising -- the only real bug case I\ncan come up with is an a-MSDU contained in an\na-MPDU), I\u0027ll make a different fix for rc.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4080c7cdc23f26c6e6166a70f50fa43814552d81", "tree": "3eb62b56b636e336033fece7b7089b1e28b254ad", "parents": [ "4b0dd98e70b6516c2c26f28091c2fb09f0ecf215" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Sep 24 11:21:08 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 27 15:57:53 2010 -0400" }, "message": "mac80211: fix release_reorder_timeout in scan\n\nEven if the reorder timeout timer fires while\nscanning, the frames weren\u0027t received during\nscanning and therefore shouldn\u0027t be dropped.\nTo implement this, changes to the passive scan\nRX handler simplify understanding it, because\nit currently checks HW_SCANNING independently\nof a packet\u0027s in-scan receive status (which\ndoesn\u0027t make a big difference, since scan_rx()\nwill only pick up probe responses and beacons,\nwhich can\u0027t be aggregated.)\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4b0dd98e70b6516c2c26f28091c2fb09f0ecf215", "tree": "2d791b673851f15f596290e9848b5c2be409d3cd", "parents": [ "4406c376895608375105013bf405ecac720ef558" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Sep 24 11:21:07 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 27 15:57:52 2010 -0400" }, "message": "mac80211: clean up rx handling wrt. found_sta\n\nIf a station was found, then we\u0027ll have exited\nthe function already, so it is not necessary to\nhave a variable keeping track of it.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4406c376895608375105013bf405ecac720ef558", "tree": "88af3f15a2e025bd1eca272aab5e4acad4ea95de", "parents": [ "20b01f80f72426e7ed2e773220da4357925383d5" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Sep 24 11:21:06 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 27 15:57:51 2010 -0400" }, "message": "mac80211: consolidate packet processing\n\nThere are now four instances of vaguely the same\ncode that does packet preparation, checking for\nMMIC errors and reporting them, and then invoking\npacket processing. Consolidate all of these.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "20b01f80f72426e7ed2e773220da4357925383d5", "tree": "a2e81cf9dec56a8a6b2c739d9eaf59061e700b61", "parents": [ "7c1e183186377e84e6f4e457be0514887f2df4ef" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Sep 24 11:21:05 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 27 15:57:50 2010 -0400" }, "message": "mac80211: remove prepare_for_handlers sdata argument\n\nThe first argument to prepare_for_handlers is always\nthe sdata that can just be stored in rx data directly\n(and even already is, in two of four code paths.)\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7c1e183186377e84e6f4e457be0514887f2df4ef", "tree": "dbc559ec2dab072eaf57ab7dabe24d95f952c256", "parents": [ "92e44948b2b3b2db8f39f17033f98ae2356156a5" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 24 15:52:49 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 27 15:57:48 2010 -0400" }, "message": "Revert \"mac80211: fix use-after-free\"\n\nThis reverts commit cd87a2d3a33d75a646f1aa1aa2ee5bf712d6f963.\n\nAuthor reports it conflicts with proper fixes, applied hereafter.\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "92e44948b2b3b2db8f39f17033f98ae2356156a5", "tree": "fd617ba0a5d939cbe03cfb579ee3e39c46fe2255", "parents": [ "56af326830757f3e8a1742770d15dfd6e3c40e85" ], "author": { "name": "Teemu Paasikivi", "email": "ext-teemu.3.paasikivi@nokia.com", "time": "Fri Sep 24 07:23:55 2010 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 27 15:57:47 2010 -0400" }, "message": "nl80211: Fix exit from nl80211_set_power_save\n\nIf interface does not existk, when nl80211_set_power_save is called, (eg.\nmodule has been unloaded) it has been causing kernel panic. Added new\ngoto target to avoid crash if get_rdev_dev_by_info_ifindex does not\nreturn dev and rdev pointers.\n\nSigned-off-by: Teemu Paasikivi \u003cext-teemu.3.paasikivi@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "56af326830757f3e8a1742770d15dfd6e3c40e85", "tree": "acf276936ef8676ed694a8f9a9fedc1b2a50b696", "parents": [ "686b9cb994f5f74be790df4cd12873dfdc8a6984" ], "author": { "name": "Ben Greear", "email": "greearb@candelatech.com", "time": "Thu Sep 23 10:22:24 2010 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 27 15:57:46 2010 -0400" }, "message": "mac80211: Support receiving data frames on multiple vifs.\n\nWhen using multiple STA interfaces on the same radio, some\ndata packets need to be received on all interfaces\n(broadcast, for instance).\n\nMake the STA loop look similar to the mgt-data loop.\n\nAlso, add logic to check RX_FLAG_MMIC_ERROR for last\ninterface in mgt-data loop.\n\nSigned-off-by: Ben Greear \u003cgreearb@candelatech.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "686b9cb994f5f74be790df4cd12873dfdc8a6984", "tree": "960bae4d7613e4420c28d0c422e3c63c2a569ed3", "parents": [ "295bafb47b0d365e1b4f747dffef29e590f13233" ], "author": { "name": "Ben Greear", "email": "greearb@candelatech.com", "time": "Thu Sep 23 09:44:36 2010 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 27 15:57:45 2010 -0400" }, "message": "mac80211/ath9k: Support AMPDU with multiple VIFs.\n\nThe old ieee80211_find_sta_by_hw method didn\u0027t properly\nfind VIFS when there was more than one per AP. This caused\nAMPDU logic in ath9k to get the wrong VIF when trying to\naccount for transmitted SKBs.\n\nThis patch changes ieee80211_find_sta_by_hw to take a\nlocaladdr argument to distinguish between VIFs with the\nsame AP but different local addresses. The method name\nis changed to ieee80211_find_sta_by_ifaddr.\n\nSigned-off-by: Ben Greear \u003cgreearb@candelatech.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "295bafb47b0d365e1b4f747dffef29e590f13233", "tree": "10f1ad56c7094bacddee96de62beb77795787346", "parents": [ "a42acef0dd3548ffda03d245d41b95250354017e" ], "author": { "name": "Ben Greear", "email": "greearb@candelatech.com", "time": "Wed Sep 22 20:29:01 2010 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 27 15:57:43 2010 -0400" }, "message": "mac80211: Support multiple VIFS per AP in debugfs.\n\nCreate \u0027stations\u0027 sub-directory under each netdev:[vif-name]\ndirectory to hold all stations for that network device.\n\nSigned-off-by: Ben Greear \u003cgreearb@candelatech.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a42acef0dd3548ffda03d245d41b95250354017e", "tree": "e2fcceb50c211c3b3fdabb8dde2e7837c176274d", "parents": [ "e17f83eafd37129f9e09425136e59bc4333bdb9c" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 22 12:34:54 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 27 15:57:42 2010 -0400" }, "message": "ath9k_hw: simplify revision checks for AR9287\n\nSince AR9287 v1.0 was never sold (and the initvals removed), its revision\nchecks can be simplified similar to AR9280\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e17f83eafd37129f9e09425136e59bc4333bdb9c", "tree": "8cbe188c2968cbbfe628d550106e6c659cf93652", "parents": [ "7a37081e2e25e58701b17c41579fd06bc353b392" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 22 12:34:53 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 27 15:57:41 2010 -0400" }, "message": "ath9k_hw: simplify revision checks for AR9285\n\nSince AR9285 v1.0 and v1.1 were never sold (and the initvals removed),\nits revision checks can be simplified similar to AR9280\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7a37081e2e25e58701b17c41579fd06bc353b392", "tree": "94a4f361030b97115ff90c37f00459c8666d9fdd", "parents": [ "67e0208acea29682f5766eb9f67f6f26117eef3e" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 22 12:34:52 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 27 15:57:39 2010 -0400" }, "message": "ath9k_hw: simplify revision checks for AR9280\n\nSince AR9280 v1.0 was never sold (and the initvals removed), v1.0 specific\nrevision checks can be removed and the \u0027v2.0 or later\u0027 check can be\nsimplified to a check for AR9280 or later.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "67e0208acea29682f5766eb9f67f6f26117eef3e", "tree": "39445bd52a7c310d5f70b94aa0c257fdd1a8669b", "parents": [ "87fd2e6c90acb45a5741207fc953190596f93841" ], "author": { "name": "Ido Yariv", "email": "ido@wizery.com", "time": "Wed Sep 22 09:53:13 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 27 15:57:38 2010 -0400" }, "message": "wl1271: Fix overflow in wl1271_boot_upload_nvs\n\nDue to miscalculation of nvs_len, excessive data was sent to the\nfirmware.\nFix this by first setting nvs_ptr to point to the first NVS table,\nand computing the total size of all NVS tables accordingly.\n\nSigned-off-by: Ido Yariv \u003cido@wizery.com\u003e\nTested-By: Tuomas Katila \u003cext-tuomas.2.katila@nokia.com\u003e\nAcked-by: Luciano Coelho \u003cluciano.coelho@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "87fd2e6c90acb45a5741207fc953190596f93841", "tree": "766d1ebdee86186004563553f6780f3f4f1b6d62", "parents": [ "9cf13668a5f8165a81349defc5f82c57a4a8279b" ], "author": { "name": "Ben Greear", "email": "greearb@candelatech.com", "time": "Tue Sep 21 17:03:57 2010 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 27 15:57:36 2010 -0400" }, "message": "ath5k: Add bssid mask and rxfilter to debugfs.\n\nHelps with debugging virtual interfaces.\n\nSigned-off-by: Ben Greear \u003cgreearb@candelatech.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9cf13668a5f8165a81349defc5f82c57a4a8279b", "tree": "a04f7cec0ef9e0aa449c5906931313179c6e8a98", "parents": [ "9094537c3a9ef9e127e844254a74186735c9a90b" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanoharan@atheros.com", "time": "Tue Sep 21 12:58:09 2010 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 24 15:54:32 2010 -0400" }, "message": "ath9k_htc: Fix beacon distribution in IBSS mode\n\nThis patch ensures fair beacon distribution in IBSS mode\nby configuring proper CWmin based on slot time.\n\nSigned-off-by: Rajkumar Manoharan \u003crmanoharan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9094537c3a9ef9e127e844254a74186735c9a90b", "tree": "22152ac2014faba77fc4def307deedf35d13d389", "parents": [ "eb7d3066cf864342e8ae6a5c1126a1602c4d06c0" ], "author": { "name": "Vasanthakumar Thiagarajan", "email": "vasanth@atheros.com", "time": "Mon Sep 20 22:54:46 2010 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 24 15:54:31 2010 -0400" }, "message": "ath9k: Fix tx struck state with paprd\n\nPaprd needs to be done only on active chains(not for all the chains\nthat hw can support). The paprd training frames which are sent\nfor inactive chains would be hanging on the hw queue without\ngetting transmitted and would make the connection so unstable.\nThis issue happens only with the hw which supports paprd cal(ar9003).\n\nSigned-off-by: Vasanthakumar Thiagarajan \u003cvasanth@atheros.com\u003e\nCc: stable@kernel.org\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "eb7d3066cf864342e8ae6a5c1126a1602c4d06c0", "tree": "85c7a4f11d06d1c90a3bcba05adc7df1eb3f2823", "parents": [ "ed627be38a1a07c6986a9f17c299f6afc86ac6b7" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Tue Sep 21 21:36:18 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 24 15:54:30 2010 -0400" }, "message": "mac80211: clear txflags for ps-filtered frames\n\nThis patch fixes stale mac80211_tx_control_flags for\nfiltered / retried frames.\n\nBecause ieee80211_handle_filtered_frame feeds skbs back\ninto the tx path, they have to be stripped of some tx\nflags so they won\u0027t confuse the stack, driver or device.\n\nCc: \u003cstable@kernel.org\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ed627be38a1a07c6986a9f17c299f6afc86ac6b7", "tree": "a6e49bcc9b00fb0aa38fb94ef39903bddc56ce9d", "parents": [ "651b52254fc061f02d965524e71de4333a009a5a" ], "author": { "name": "Dan Carpenter", "email": "error27@gmail.com", "time": "Sun Sep 12 01:48:33 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 24 15:54:29 2010 -0400" }, "message": "airo: remove \"basic_rate\" module option\n\nThe \"basic_rate\" module option is not implemented correctly. If the\nrate was set to zero it was supposed to set it to \"basic_rate | 0x80\".\nUnfortunately the check to see if what zero was wrong and it checked\n\"!ai-\u003econfig.rates\" (which is always false) instead of\n\"!ai-\u003econfig.rates[i]\".\n\nThis option was just used for development and it wasn\u0027t documented\nanywhere. Instead of fixing it, we can just remove it.\n\nReported-by: Stanislaw Gruszka \u003csgruszka@redhat.com\u003e\nSigned-off-by: Dan Carpenter \u003cerror27@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "651b52254fc061f02d965524e71de4333a009a5a", "tree": "5eb085461cc417ca32fe7a8a13f52b231030be86", "parents": [ "8dcb20038ade81f9a87c024e7f12ec74f0e95f33" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Sat Aug 28 19:37:51 2010 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 24 15:54:28 2010 -0400" }, "message": "mac80211: Add DS Parameter Set into Probe Request on 2.4 GHz\n\nIEEE Std 802.11k-2008 added DS Parameter Set information element into\nProbe Request frames as an optional information on 2.4 GHz band (and\nmandatory, if radio measurements are enabled). This allows APs to\nfilter out Probe Request frames that may be received from neighboring\noverlapping channels and by doing so, reduce the number of unnecessary\nframes in the air. Make mac80211 add this IE into Probe Request frames\nwhenever the channel is known (i.e., whenever hwscan is not used).\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8dcb20038ade81f9a87c024e7f12ec74f0e95f33", "tree": "fe970ab661be7ec61165bdcb5db2c4422a1822fd", "parents": [ "29ad2facd47f8e37eab8b156e2c384fa181c8b4a" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Sat Aug 28 19:36:10 2010 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 24 15:54:27 2010 -0400" }, "message": "mac80211: Filter ProbeReq SuppRates based on TX rate mask\n\nIf the TX rate set has been masked, the removed rates can also be\nremoved from the Supported Rates and Extended Supported Rates IEs in\nProbe Request frames.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "29ad2facd47f8e37eab8b156e2c384fa181c8b4a", "tree": "25d4df186cd631810ff15a8e7d37cb6cdd806cdb", "parents": [ "6e5c2b4e8addfaab8ef54dedaf7b607e1585c35b", "cd87a2d3a33d75a646f1aa1aa2ee5bf712d6f963" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 24 15:52:34 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 24 15:52:34 2010 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n\nConflicts:\n\tdrivers/net/wireless/ath/ath5k/base.c\n\tnet/mac80211/main.c\n" }, { "commit": "cd87a2d3a33d75a646f1aa1aa2ee5bf712d6f963", "tree": "45709536e1c4f36c345b16f90849c7833d23337b", "parents": [ "df6d02300f7c2fbd0fbe626d819c8e5237d72c62" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Sep 24 11:20:47 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 24 15:21:55 2010 -0400" }, "message": "mac80211: fix use-after-free\n\ncommit 8c0c709eea5cbab97fb464cd68b06f24acc58ee1\nAuthor: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nDate: Wed Nov 25 17:46:15 2009 +0100\n\n mac80211: move cmntr flag out of rx flags\n\nmoved the CMTR flag into the skb\u0027s status, and\nin doing so introduced a use-after-free -- when\nthe skb has been handed to cooked monitors the\nstatus setting will touch now invalid memory.\n\nAdditionally, moving it there has effectively\ndiscarded the optimisation -- since the bit is\nonly ever set on freed SKBs, and those were a\ncopy, it could never be checked.\n\nFor the current release, fixing this properly\nis a bit too involved, so let\u0027s just remove the\nproblematic code and leave userspace with one\ncopy of each frame for each virtual interface.\n\nCc: stable@kernel.org [2.6.33+]\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6e5c2b4e8addfaab8ef54dedaf7b607e1585c35b", "tree": "02a6ffb04e06f658fcb92860b14be41b38b4b99e", "parents": [ "334b06029ed3f5e31d773527d54fb40e3ee571f9" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Mon Sep 20 13:45:40 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:35 2010 -0400" }, "message": "ath9k: make the driver specific rate control module optional\n\nath9k can use minstrel_ht instead, so it makes sense to save some space here.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "334b06029ed3f5e31d773527d54fb40e3ee571f9", "tree": "e37310774c076522ff9086c3e3114379959fa265", "parents": [ "90fa539ca3f07323da5a90f5c8f4e5cd952875e7" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Mon Sep 20 13:45:39 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:34 2010 -0400" }, "message": "ath9k: move ath_tx_aggr_check() to the rate control module\n\nIt is not used anywhere else and can be made static\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "90fa539ca3f07323da5a90f5c8f4e5cd952875e7", "tree": "8d8bb5a53f2316cd36f8b4c709e7db8eafe3db89", "parents": [ "231c3a1f0630c07a584905507a1cb7b705a56ab7" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Mon Sep 20 13:45:38 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:33 2010 -0400" }, "message": "ath9k: clean up / fix aggregation session flush\n\nThe tid aggregation cleanup is a bit fragile, as it discards failed\nsubframes in some places, and retransmits them in others. This could\nblock the cleanup of an existing aggregation session, if a retransmission\nfor a tid is issued, yet the tid is never scheduled again because of\nthe cleanup state.\n\nFix this by getting rid of as many subframes as possible, as early\nas possible, and immediately transmitting pending subframes as regular\nHT frames instead of waiting for the cleanup to complete.\n\nDrop all pending subframes while keeping track of the Block ACK window\nduring aggregate tx completion to prevent sending out stale subframes,\nwhich could confuse the receiver side.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nCc: stable@kernel.org\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "231c3a1f0630c07a584905507a1cb7b705a56ab7", "tree": "10ad974e6c1b55aa986fe2136fbbea2125e1eff3", "parents": [ "81ee13ba7ef8c9eaebe91ed06edb844ab6403d4e" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Mon Sep 20 19:35:28 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:31 2010 -0400" }, "message": "ath9k: fix an aggregation start related race condition\n\nA new aggregation session start can be issued by mac80211, even when the\ncleanup of the previous session has not completed yet. Since the data structure\nfor the session is not recreated, this could corrupt the block ack window\nand lock up the aggregation session. Fix this by delaying the new session\nuntil the old one has been cleaned up.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nCc: stable@kernel.org\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "81ee13ba7ef8c9eaebe91ed06edb844ab6403d4e", "tree": "97367274292719e8238296c3f0d26c4c56f38b4b", "parents": [ "9ee82d541095cb64bf16a1f5d7573a8cddc125aa" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Mon Sep 20 13:45:36 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:30 2010 -0400" }, "message": "ath9k: clean up block ack window handling\n\nThere\u0027s no reason to keep pointers to pending tx buffers around, if they\u0027re\nonly used to keep track of which frames are still pending. Use a bitfield\ninstead.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9ee82d541095cb64bf16a1f5d7573a8cddc125aa", "tree": "babd0a8aed1651eeafd34f8764702681c62fa15a", "parents": [ "58be4607d25f86962dee6cc6b30573f95303517e" ], "author": { "name": "Eliad Peller", "email": "eliad@wizery.com", "time": "Sun Sep 19 18:55:09 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:29 2010 -0400" }, "message": "wl1271: bugfix: use bitwise-AND instead of logical-AND\n\ntypo - while looking for specific bits we should do a bitwise-AND instead of logical-AND.\n\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nAcked-by: Luciano Coelho \u003cluciano.coelho@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "58be4607d25f86962dee6cc6b30573f95303517e", "tree": "fc48ce3bd7357905eb12cfcb59958cb72ad8f58e", "parents": [ "2c7808d9345b91bb19f6bfaebf7b9e0916b0859a" ], "author": { "name": "Eliad Peller", "email": "eliad@wizery.com", "time": "Sun Sep 19 18:55:08 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:28 2010 -0400" }, "message": "wl1271: avoid redundant memcpy of rx_status\n\ncopy the rx_status directly to skb-\u003ecb (control buffer) instead of copying\nit to a local struct and then copying it again (for each rx packet)\n\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nAcked-by: Luciano Coelho \u003cluciano.coelho@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2c7808d9345b91bb19f6bfaebf7b9e0916b0859a", "tree": "623d614f7320b5164f64aba758a02dd2e40d02c8", "parents": [ "735761108f435a30bbabb5254fc5a8e17b99f2a1" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Sat Sep 18 00:15:13 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:26 2010 -0400" }, "message": "carl9170: fix hang in AP mode when HT STA does PSM\n\nThis is a obvious bug, skb_queue_walk does not\nwork if the iterator gets removed from the queue.\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "735761108f435a30bbabb5254fc5a8e17b99f2a1", "tree": "750f19fd393f33e9b5577d4b035d4c19521e13ad", "parents": [ "78ec789bd397249a9bb412ca91bd360079e7b446" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Fri Sep 17 23:09:19 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:25 2010 -0400" }, "message": "carl9170: reinit phy after HT settings have changed\n\nThe driver has a set of different initvals for 20 MHz\nvs dynamic HT2040 operation. Because we can\u0027t change\nsome of the registers \"in-flight\", the driver needs to\nperform a warm reset.\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "78ec789bd397249a9bb412ca91bd360079e7b446", "tree": "b7296e1a0888f76bd17b908eeceb1d337da35807", "parents": [ "cf6487d0d656994cc43851b8c2384741e220f7ac" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Fri Sep 17 22:58:40 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:24 2010 -0400" }, "message": "carl9170: fix state downgrade during reset\n\nDon\u0027t mark the device as completely dead just yet.\nIf all goes to plan and carl9170_reboot succeeds\nthen we can skip the expensive userspace-driven\nreinitialization anyway.\n\nAnd if it doesn\u0027t and carl9170_reboot fails,\nthen carl9170_usb_cancel_urbs will do the\nnecessary steps.\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cf6487d0d656994cc43851b8c2384741e220f7ac", "tree": "980ca060b728490b3d0ab7a13aeb05af31d07dba", "parents": [ "9adc9e0ff397fb2d4f383cc2d399b18adc32e6eb" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Fri Sep 17 22:47:28 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:23 2010 -0400" }, "message": "carl9170: abort tasklet during usb reset\n\nThis patch prevents the tasklet code from\ninterfering while the firmware is down for\nan unscheduled maintenance.\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9adc9e0ff397fb2d4f383cc2d399b18adc32e6eb", "tree": "64b9b6ef3ce64dbc179df66414ed0bb6d047e7ce", "parents": [ "e278c5a90368408bd191743e7c6f978f068f4b8d" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Fri Sep 17 22:42:37 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:21 2010 -0400" }, "message": "carl9170: don\u0027t load bogus nf of chain 1\n\nAccording to Atheros, chain 1 is not connected.\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e278c5a90368408bd191743e7c6f978f068f4b8d", "tree": "6900ca09d6309e2e0621e1ab7ff405f5ab959763", "parents": [ "9dec6f9c48242eec742c9475f32eeef29448701c" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Fri Sep 17 22:22:50 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:20 2010 -0400" }, "message": "carl9170: fix noise dBm conversion\n\nEver since carl9170 gained support to read the noisefloor,\nthe reported noisefloor level was pretty poor.\n\nInitially I assumed that something was wrong in the PHY\nsetup and it would be impossible to fix without any\nguidances. But this was not the case. In fact the nf\nreadings were correct and the thing that was broken\nwas the \"simple\" sign extension code!\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9dec6f9c48242eec742c9475f32eeef29448701c", "tree": "814ec6e73726d85cb1f1c82a91e69ada7809b158", "parents": [ "e0b1cc52e5da3e2fa79666b8df81a953c95c91e4" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Fri Sep 17 22:07:59 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:19 2010 -0400" }, "message": "carl9170: use rx chainmask from eeprom\n\nThe eeprom provides a mask for all present rx chains.\nWhy not use it instead of the generic initval default?\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e0b1cc52e5da3e2fa79666b8df81a953c95c91e4", "tree": "eee5ffdd024beb0af165b69b6ec6c6cbe6fcc49e", "parents": [ "de8af45520f47d14397b603beefae3d2983ce787" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Fri Sep 17 11:37:18 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:18 2010 -0400" }, "message": "ath5k: Add tx queue configuration function\n\nAdd the mac80211 callback function to configure the tx queue properties like\ncw_min, cw_max and aifs.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "de8af45520f47d14397b603beefae3d2983ce787", "tree": "493af409fabc1be554664480847ed280bd06ff6c", "parents": [ "234132960dcf8ebd9d424d92a4dfb0e57fa63a17" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Fri Sep 17 11:37:12 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:16 2010 -0400" }, "message": "ath5k: Simplify cw_min/max and AIFS configuration\n\nGet rid of overly complicated cw_min/max and AIFS configuration:\n\n* Validate values in ath5k_hw_set_tx_queueprops(), so we can use them directly\n without further checks or computation in ath5k_hw_reset_tx_queue().\n\n* Simplifiy by using AR5K_TUNE_AIFS|CWMIN|CWMAX variables directly since we\n don\u0027t support XR or B channels. That way we can also remove\n AR5K_TXQ_USEDEFAULT and the confusing logic around it.\n\n* Update data types: AIFS is u8, CW\u0027s are u16.\n\n* Remove now unneeded variables in ath5k_hw.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "234132960dcf8ebd9d424d92a4dfb0e57fa63a17", "tree": "8cb08ec25b181921f9912f72cde3762549a3c520", "parents": [ "923e5b3d3d773b9956b943ac64f782d5a127bdea" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Fri Sep 17 11:37:07 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:15 2010 -0400" }, "message": "ath5k: Keep last descriptor in queue\n\nIf we return a TX descriptor to the pool of available descriptors, while a\nqueues TXDP still points to it we could potentially run into all sorts of\ntroube.\n\nIt has been suggested that there is hardware which can set the descriptors\ndone bit before it reads ds_link and moves on to the next descriptor. While the\ndocumentation says this is not true for newer chipsets (the descriptor contents\nare copied to some internal memory), we don\u0027t know about older hardware.\n\nTo be safe, we always keep the last descriptor in the queue, and avoid dangling\nTXDP pointers. Unfortunately this does not fully resolve the problem - queues\nstill get stuck!\n\nThis is similar to what ath9k does.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "923e5b3d3d773b9956b943ac64f782d5a127bdea", "tree": "04baaf5b5f2edb1b467f6e9debc075c2bb2b62cc", "parents": [ "4edd761f4075b03be5932682a2f7b9368dc9e536" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Fri Sep 17 11:37:02 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:14 2010 -0400" }, "message": "ath5k: Count how many times a queue got stuck\n\nAdd a counter to show how many times a queue got stuck in the debugfs queue\nfile.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4edd761f4075b03be5932682a2f7b9368dc9e536", "tree": "2920eb3213e722a68e560eed472c24542812ac77", "parents": [ "1440401e7051d4cf66084a7c36125834901bb90d" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Fri Sep 17 11:36:56 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:12 2010 -0400" }, "message": "ath5k: Add watchdog for stuck TX queues\n\nSince we do not know any better solution to the problem that TX queues can get\nstuck, this adds a timer-based watchdog, which will check for stuck queues and\nreset the hardware if necessary.\n\nPorted from ath9k commit 164ace38536849966ffa377b1b1132993a5a375d.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1440401e7051d4cf66084a7c36125834901bb90d", "tree": "89878fd68c4ac88341692a190ee4996cefd32298", "parents": [ "651d9375dca9997ef2b05639191756da73b0cf8d" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Fri Sep 17 11:36:51 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:11 2010 -0400" }, "message": "ath5k: Move tx frame completion into separate function\n\nClearer separation between queue handling and what we do with completed frames.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "651d9375dca9997ef2b05639191756da73b0cf8d", "tree": "64666ca0bcd3723e1415bbd540a50fc81f4441e5", "parents": [ "cfddc11c429a655e418ffc111372cc69dee6a1a5" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Fri Sep 17 11:36:46 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:10 2010 -0400" }, "message": "ath5k: Fix TX queues stopping\n\nIt does not make sense to stop queues for NF calibration. This will not stop\ntransmissions from the card, if there are queued packets.\n\nIf we run out of TX buffers we need to stop all queues, not only one.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cfddc11c429a655e418ffc111372cc69dee6a1a5", "tree": "5e6490aa9accb4e713d4c102f38d34023136cecc", "parents": [ "925e0b061300c94912be36eac16f0b44249a1add" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Fri Sep 17 11:36:40 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:09 2010 -0400" }, "message": "ath5k: Fix queue debug file\n\nTake txq lock in debug file and fix reporting of used buffers.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "925e0b061300c94912be36eac16f0b44249a1add", "tree": "45045b4e80a4235d3ad90f185f39a445a727e0ee", "parents": [ "8a63facc376a7b8bb2b64c0ffbdb0949d1d6c71c" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Fri Sep 17 11:36:35 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:08 2010 -0400" }, "message": "ath5k: Use four hardware queues\n\nPrepare ath5k for WME by using four hardware queues.\n\nThe way we set up our queues matches the mac80211 queue priority 1:1, so we\ndon\u0027t have to do any mapping for queue numbers.\n\nEvery queue uses 50 of the total 200 available transmit buffers, so the DMA\nmemory usage does not increase with this patch, but it might be good to\nfine-tune the number of buffers per queue later (depending on the CPU speed and\nload, and the speed of the medium access, it might not be big enough).\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8a63facc376a7b8bb2b64c0ffbdb0949d1d6c71c", "tree": "ba5d13d26296c2dbe258dfcec7f8a6102ff4a549", "parents": [ "ce2220d1da0bad9583af38a03ad508968d554c0f" ], "author": { "name": "Bob Copeland", "email": "me@bobcopeland.com", "time": "Fri Sep 17 12:45:07 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:06 2010 -0400" }, "message": "ath5k: reorder base.c to remove fwd decls\n\nThis change reorganizes the main ath5k file in order to re-group\nrelated functions and remove most of the forward declarations\n(from 61 down to 3). This is, unfortunately, a lot of churn, but\nthere should be no functional changes.\n\nSigned-off-by: Bob Copeland \u003cme@bobcopeland.com\u003e\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ce2220d1da0bad9583af38a03ad508968d554c0f", "tree": "12cc09795665f59b8c0299fec37a30a3e9648a68", "parents": [ "c807666a08800ab387298817db5a6f6e11606adb" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Fri Sep 17 11:36:25 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:05 2010 -0400" }, "message": "ath/ath5k/ath9k: Fix crypto capabilities merge issue\n\nFixing up a merge issue / concurrent development:\n\nRemove unneeded ath_crypt_caps flags, as per \"ath9k_hw: remove useless hw\ncapability flags\" (364734fafbba0c3133e482db78149b9a823ae7a5), but set the\nAESCCM flag for ath9k. common ath code still needs a flag for this because\nthere is ath5k hardware which can\u0027t do AES in hardware.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c807666a08800ab387298817db5a6f6e11606adb", "tree": "d20bfe845904bdedb0309d4a7ca566fc1ae5de08", "parents": [ "80b517f362605f2b6a6cfe086604534290aab2de" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Thu Sep 16 22:55:20 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:04 2010 -0400" }, "message": "carl9170: update AR9170 phy initvals\n\nThis patch is loosely based on an ath9k patch called:\n\"ath9k_hw: sync initvals for ar9001 and ar9002 with Atheros\"\n\nIt includes the following changes/fixes:\n\t- AGC setting improvements\n\t- timing changes for improved performance\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "80b517f362605f2b6a6cfe086604534290aab2de", "tree": "6516b7401b28065b187071fab8d60fed22829187", "parents": [ "b642fde7f137566c993991fd2e7bf6b8274bf625" ], "author": { "name": "Ohad Ben-Cohen", "email": "ohad@wizery.com", "time": "Thu Sep 16 01:32:30 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:02 2010 -0400" }, "message": "omap: zoom: add mmc3/wl1271 device support\n\nAdd MMC3 support on ZOOM, which has the wl1271 device hardwired to.\n\nThe wl1271 is a 4-wire, 1.8V, embedded SDIO WLAN device with an\nexternal IRQ line, and power-controlled by a GPIO-based fixed regulator.\n\nSigned-off-by: Ohad Ben-Cohen \u003cohad@wizery.com\u003e\nAcked-by: Tony Lindgren \u003ctony@atomide.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b642fde7f137566c993991fd2e7bf6b8274bf625", "tree": "c864b56cb5d81d659ad901898adabee992981139", "parents": [ "15cea99306ae14ce5f7c3d3989bcc17202e2b0be" ], "author": { "name": "Ohad Ben-Cohen", "email": "ohad@wizery.com", "time": "Thu Sep 16 01:32:09 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:01 2010 -0400" }, "message": "omap: zoom: add fixed regulator device for wlan\n\nAdd a fixed regulator vmmc device to enable power control\nof the wl1271 wlan device.\n\nSigned-off-by: Ohad Ben-Cohen \u003cohad@wizery.com\u003e\nAcked-by: Tony Lindgren \u003ctony@atomide.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "15cea99306ae14ce5f7c3d3989bcc17202e2b0be", "tree": "4755cdb83ca470dfa44b02f6f34aa8fa1c3454c6", "parents": [ "09cecc340b3b4d9960b039c0f576548bbf857f5a" ], "author": { "name": "Ohad Ben-Cohen", "email": "ohad@wizery.com", "time": "Thu Sep 16 01:31:51 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:05:00 2010 -0400" }, "message": "wl1271: make ref_clock configurable by board\n\nThe wl1271 device is using a reference clock that may change\nbetween board to board.\n\nMake the ref_clock parameter configurable by board settings\ninstead of having a hard coded value in the sources.\n\nSigned-off-by: Ohad Ben-Cohen \u003cohad@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "09cecc340b3b4d9960b039c0f576548bbf857f5a", "tree": "edae6862d48eafb93d04632336261bdf83629d72", "parents": [ "61ee7007a5d61aa066076da578e8e8084e122d7d" ], "author": { "name": "Ohad Ben-Cohen", "email": "ohad@wizery.com", "time": "Thu Sep 16 01:31:35 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:04:59 2010 -0400" }, "message": "wl1271: take irq info from private board data\n\nRemove the hard coded irq information, and instead take\nthe irq information from the board\u0027s platform data.\n\nSigned-off-by: Ohad Ben-Cohen \u003cohad@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "61ee7007a5d61aa066076da578e8e8084e122d7d", "tree": "a4a9a4d812504af92fd4e84e92578b7dfbbf2605", "parents": [ "2cc78ff78c0af502b040d4527212e29e02d3231d" ], "author": { "name": "Ohad Ben-Cohen", "email": "ohad@wizery.com", "time": "Thu Sep 16 01:31:12 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:04:57 2010 -0400" }, "message": "wl12xx: add platform data passing support\n\nAdd a simple mechanism to pass platform data to the\nSDIO instances of wl12xx.\n\nThis way there is no confusion over who owns the \u0027embedded data\u0027,\ntypechecking is preserved, and no possibility for the wrong driver to\npick up the data.\n\nOriginally proposed by Russell King.\n\nSigned-off-by: Ohad Ben-Cohen \u003cohad@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2cc78ff78c0af502b040d4527212e29e02d3231d", "tree": "f056210964e0d5799027f900dec47aa10572599a", "parents": [ "c1f9a095600e07fefe64eb94eb711f410100824a" ], "author": { "name": "Ohad Ben-Cohen", "email": "ohad@wizery.com", "time": "Thu Sep 16 01:22:04 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:04:56 2010 -0400" }, "message": "wl1271: propagate set_power\u0027s return value\n\nMake it possible for the set power method to indicate a\nsuccess/failure return value. This is needed to support\nmore complex power on/off operations such as SDIO\npower manipulations.\n\nSigned-off-by: Ohad Ben-Cohen \u003cohad@wizery.com\u003e\nAcked-by: Luciano Coelho \u003cluciano.coelho@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c1f9a095600e07fefe64eb94eb711f410100824a", "tree": "7117a504f324b2b835fea50a5379cd94429978f5", "parents": [ "09f250ac8faefa9deb14854e4715a139ed99617b" ], "author": { "name": "Ohad Ben-Cohen", "email": "ohad@wizery.com", "time": "Thu Sep 16 13:16:02 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 21 11:04:38 2010 -0400" }, "message": "wl12xx: make wl12xx.h common to both spi and sdio\n\nMove wl12xx.h outside of the spi-specific location,\nso it can be shared with both spi and sdio solutions.\n\nUpdate all users of spi/wl12xx.h accordingly\n\nSigned-off-by: Ohad Ben-Cohen \u003cohad@wizery.com\u003e\nAcked-by: Luciano Coelho \u003cluciano.coelho@nokia.com\u003e\nAcked-by: Tony Lindgren \u003ctony@atomide.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "df6d02300f7c2fbd0fbe626d819c8e5237d72c62", "tree": "7f0eadba6ca9d0cc19b26dc82ec61bc8df4c9fe2", "parents": [ "7acc7c683a747689aaaaad4fce1683fc3f85e552" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Sep 17 00:38:25 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 20 13:41:40 2010 -0400" }, "message": "wext: fix potential private ioctl memory content leak\n\nWhen a driver doesn\u0027t fill the entire buffer, old\nheap contents may remain, and if it also doesn\u0027t\nupdate the length properly, this old heap content\nwill be copied back to userspace.\n\nIt is very unlikely that this happens in any of\nthe drivers using private ioctls since it would\nshow up as junk being reported by iwpriv, but it\nseems better to be safe here, so use kzalloc.\n\nReported-by: Jeff Mahoney \u003cjeffm@suse.com\u003e\nCc: stable@kernel.org\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "09f250ac8faefa9deb14854e4715a139ed99617b", "tree": "993d3240fa7a8e46157b1c5b53fd8b2ff67ca5dd", "parents": [ "b345f4da42da69f7136ea1b83ef38b3412e51b72" ], "author": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Mon Sep 13 08:08:18 2010 -0700" }, "committer": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Fri Sep 17 13:18:57 2010 -0700" }, "message": "iwlagn: initialize both tx/rx prio boost parameters\n\nFor config bt command, initialize both tx_prio_boost and\nrx_prio_boost to \"0\".\n\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\n" }, { "commit": "b345f4da42da69f7136ea1b83ef38b3412e51b72", "tree": "9aef7e8a68f8dd6ef227f6e55253d41699b26571", "parents": [ "1d270075be62fb8212bd5afebd0bab693759a1a0" ], "author": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Mon Sep 13 07:51:03 2010 -0700" }, "committer": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Fri Sep 17 13:18:49 2010 -0700" }, "message": "iwlagn: minor coex API changes\n\nAdding two new parameters in config bt API. these two parameters\nuse the 3 reserved bytes, so there is no structure size changes.\n\nMake sure set both parameters to \"zero\" in order to preserve\nprevious behavior.\n\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\n" }, { "commit": "1d270075be62fb8212bd5afebd0bab693759a1a0", "tree": "ba128c41a7fc3b4352e1caaa662aa4a49da72e0a", "parents": [ "0b7e5e85b0317f06d92704a5be42cc101a552ab5" ], "author": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Tue Sep 07 12:42:20 2010 -0700" }, "committer": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Fri Sep 17 13:18:39 2010 -0700" }, "message": "iwlagn: correct naming for failure reply tx status\n\nFor failure tx status 0x90 and 0x91, give the correct name to reflect\nthe errors.\n\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\n" }, { "commit": "0b7e5e85b0317f06d92704a5be42cc101a552ab5", "tree": "11b4194bb740ef580be1d30d768faa86c7a2b861", "parents": [ "95b49ed013c9a8856ce768d8d4a62acfc410f73d" ], "author": { "name": "Jay Sternberg", "email": "jay.e.sternberg@intel.com", "time": "Wed Sep 08 09:42:35 2010 -0700" }, "committer": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Fri Sep 17 13:18:30 2010 -0700" }, "message": "iwlwifi: corrections to debug output of ucode statistics\n\nremove duplicate header and clean up format so it is defined once\nmaking changes consolicated ensuring consistancy of output.\nno function change to date displayed.\n\nSigned-off-by: Jay Sternberg \u003cjay.e.sternberg@intel.com\u003e\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\n" }, { "commit": "95b49ed013c9a8856ce768d8d4a62acfc410f73d", "tree": "996a44eb0c397e22405d2b0ff0c87f9e14285cb9", "parents": [ "814665fef7562b31d32e515c4d91b06c8b956560" ], "author": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Sun Sep 05 10:49:45 2010 -0700" }, "committer": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Fri Sep 17 13:18:17 2010 -0700" }, "message": "iwlagn: adding aggregated frame failure status to debugfs\n\nAddition to standard tx frame failure report, adding aggregated\nframe failure report to debugfs\n\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\n" }, { "commit": "814665fef7562b31d32e515c4d91b06c8b956560", "tree": "a286ad2b5eb4cc618fceebd54594411bf61e8495", "parents": [ "e1b3fa0c22625d985cc7f82b7f3aa90a6fc75c2f" ], "author": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Sun Sep 05 10:49:44 2010 -0700" }, "committer": { "name": "Wey-Yi Guy", "email": "wey-yi.w.guy@intel.com", "time": "Fri Sep 17 13:18:02 2010 -0700" }, "message": "iwlagn: keep track of aggregated tx frames failure counter\n\nWhen uCode completed the aggregated frames transmission attempt,\nit will send tx command response with aggregated frame status.\n\nKeep track of the failure counter which help indicate any transmission\nerror condition.\n\nSigned-off-by: Wey-Yi Guy \u003cwey-yi.w.guy@intel.com\u003e\n" } ], "next": "e1b3fa0c22625d985cc7f82b7f3aa90a6fc75c2f" }