)]}'
{
  "log": [
    {
      "commit": "f7969969f416e593bcc7dc24abf3f9fd6c27136d",
      "tree": "4f4e2ef49d2afae82442ba273d7490938232f113",
      "parents": [
        "3d832611d794b3d312d26a4b251ac5285206f90d"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Fri Aug 21 12:23:49 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Aug 28 14:40:30 2009 -0400"
      },
      "message": "cfg80211: make spurious warnings less likely, configurable\n\nBob reported that he got warnings in IBSS mode about\nthe ssid_len being zero on a joined event, but only\nwhen kmemcheck was enabled. This appears to be due\nto a race condition between drivers and userspace,\nwhen the driver reports joined but the user in the\nmeantime decided to leave the IBSS again, the warning\nwould trigger. This was made more likely by kmemcheck\ndelaying the code that does the check and sends the\nevent.\n\nSo first, make the warning trigger closer to the\ndriver, which means it\u0027s not locked, but since only\nthe warning depends on it that\u0027s ok.\n\nAnd secondly, users will not want to have spurious\nwarnings at all, so make those that are known to be\nracy in such a way configurable.\n\nReported-by: Bob Copeland \u003cme@bobcopeland.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "59bbb6f7574bc693ed8313b98eac641116c95b94",
      "tree": "da24ed15c5e375782e79b3dab7022d2100a7987a",
      "parents": [
        "f26b32ed4bd5780855a79bb17fb1a431fa867dad"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Fri Aug 07 17:22:35 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Aug 14 09:13:42 2009 -0400"
      },
      "message": "cfg80211: validate channel settings across interfaces\n\nCurrently, there\u0027s a problem that affects regulatory\nenforcement and connection stability, in that it is\npossible to switch the channel while connected to a\nnetwork or joined to an IBSS.\n\nThe problem comes from the fact that we only validate\nthe channel against the current interface\u0027s type, not\nagainst any other interface. Thus, you have any type\nof interface up, additionally bring up a monitor mode\ninterface and switch the channel on the monitor. This\nwill obviously also switch the channel on the other\ninterface.\n\nThe problem now is that if you do that while sending\nbeacons for IBSS mode, you can switch to a disabled\nchannel or a channel that doesn\u0027t allow beaconing.\nCombined with a managed mode interface connected to\nan AP instead of an IBSS interface, you can easily\nbreak the connection that way.\n\nTo fix this, this patch validates any channel change\nwith all available interfaces, and disallows such\nchanges on secondary interfaces if another interface\nis connected to an AP or joined to an IBSS.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "1f9298f96082692bdfe73af6fc2167f627f21647",
      "tree": "ac99b1e27f93e0f4296112af23f78ab7e3a36144",
      "parents": [
        "562e482265ac4d660d9f0114419591d62f44361d"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Mon Jul 27 12:01:52 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Jul 29 15:46:18 2009 -0400"
      },
      "message": "cfg80211: combine IWESSID handlers\n\nSince we now have handlers IWESSID for all modes, we can\ncombine them into one.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "562e482265ac4d660d9f0114419591d62f44361d",
      "tree": "fd57e0b515aef085a4eb1fc0d351811c82210db8",
      "parents": [
        "0e82ffe3b90bcad72cfe80e4379946b8fb0691ca"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Mon Jul 27 12:01:51 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Jul 29 15:46:16 2009 -0400"
      },
      "message": "cfg80211: combine IWAP handlers\n\nSince we now have IWAP handlers for all modes, we can\ncombine them into one.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "0e82ffe3b90bcad72cfe80e4379946b8fb0691ca",
      "tree": "c6b73524d4db86ddcaa866d7ea81a9600b610413",
      "parents": [
        "a7bc376c858e0e724b8cb2db09b6874562d377ca"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Mon Jul 27 12:01:50 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Jul 29 15:46:14 2009 -0400"
      },
      "message": "cfg80211: combine iwfreq implementations\n\nUntil now we implemented iwfreq for managed mode, we\nneeded to keep the implementations separate, but now\nthat we have all versions implemented we can combine\nthem and export just one handler.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "80e5b06a1b0d9a6aa88dc5c9e93ba49510c52b45",
      "tree": "08adf2317a7c57d7ee12b60375a40a4865d39a5f",
      "parents": [
        "f874011bb01e7fb19904db7f739bb343a0a53fd5"
      ],
      "author": {
        "name": "Zhu Yi",
        "email": "yi.zhu@intel.com",
        "time": "Thu Jul 09 16:59:49 2009 +0800"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Jul 24 15:05:09 2009 -0400"
      },
      "message": "cfg80211: fix NULL dereference in IBSS SIOCGIWAP\n\nThis patch avoids memcpy from wdev-\u003ewext.ibss.bssid if it is NULL.\nThis could happen if we SIOCGIWAP before SIOCSIWAP.\n\nSigned-off-by: Zhu Yi \u003cyi.zhu@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "fffd0934b9390f34bec45762192b7edd3b12b4b5",
      "tree": "d9779803763261f5795fe39a402d79c4220a3a22",
      "parents": [
        "b9454e83cac42fcdc90bfbfba479132bd6629455"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Wed Jul 08 14:22:54 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Jul 24 15:05:09 2009 -0400"
      },
      "message": "cfg80211: rework key operation\n\nThis reworks the key operation in cfg80211, and now only\nallows, from userspace, configuring keys (via nl80211)\nafter the connection has been established (in managed\nmode), the IBSS been joined (in IBSS mode), at any time\n(in AP[_VLAN] modes) or never for all the other modes.\n\nIn order to do shared key authentication correctly, it\nis now possible to give a WEP key to the AUTH command.\nTo configure static WEP keys, these are given to the\nCONNECT or IBSS_JOIN command directly, for a userspace\nSME it is assumed it will configure it properly after\nthe connection has been established.\n\nSince mac80211 used to check the default key in IBSS\nmode to see whether or not the network is protected,\nit needs an update in that area, as well as an update\nto make use of the WEP key passed to auth() for shared\nkey authentication.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "667503ddcb96f3b10211f997fe55907fa7509841",
      "tree": "5e2559e94a716bb81bfc7566e3e3a05267810c31",
      "parents": [
        "4f5dadcebb55fccef34722bbbf6401d39124c8a4"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Tue Jul 07 03:56:11 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Jul 10 15:02:32 2009 -0400"
      },
      "message": "cfg80211: fix locking\n\nOver time, a lot of locking issues have crept into\nthe smarts of cfg80211, so e.g. scan completion can\nrace against a new scan, IBSS join can race against\nleaving an IBSS, etc.\n\nIntroduce a new per-interface lock that protects\nmost of the per-interface data that we need to keep\ntrack of, and sprinkle assertions about that lock\neverywhere. Some things now need to be offloaded to\nwork structs so that we don\u0027t require being able to\nsleep in functions the drivers call. The exception\nto that are the MLME callbacks (rx_auth etc.) that\ncurrently only mac80211 calls because it was easier\nto do that there instead of in cfg80211, and future\ndrivers implementing those calls will, if they ever\nexist, probably need to use a similar scheme like\nmac80211 anyway...\n\nIn order to be able to handle _deauth and _disassoc\nproperly, introduce a cookie passed to it that will\ndetermine locking requirements.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "78485475618cf9f1c70dc7f15e8deafa8b6074ab",
      "tree": "c31ebe1540016bbe1fdc41ac5b671cdc2bf143ed",
      "parents": [
        "c9cf01226e0bd1fa4f7f7024d8d53e982fad208f"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Tue Jul 07 03:56:05 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Jul 10 15:02:31 2009 -0400"
      },
      "message": "cfg80211: fix netdev down problem\n\nWe shouldn\u0027t be looking at the ssid_len for non-IBSS,\nand for IBSS we should also return an error on trying\nto leave an IBSS while not in or joining an IBSS.\n\nThis fixes an issue where we wouldn\u0027t disconnect() on\nan interface being taken down since there\u0027s no SSID\nconfigured this way.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "19957bb399e2722719c0e20c9ae91cf8b6aaff04",
      "tree": "9c4d53fe5938ceee41333a1afd5be0ed5c1ce313",
      "parents": [
        "517357c685ccc4b5783cc7dbdae8824ada19a97f"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Thu Jul 02 17:20:43 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Jul 10 15:01:53 2009 -0400"
      },
      "message": "cfg80211: keep track of BSSes\n\nIn order to avoid problems with BSS structs going away\nwhile they\u0027re in use, I\u0027ve long wanted to make cfg80211\nkeep track of them. Without the SME, that wasn\u0027t doable\nbut now that we have the SME we can do this too. It can\nkeep track of up to four separate authentications and\none association, regardless of whether it\u0027s controlled\nby the cfg80211 SME or the userspace SME.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "7ebbe6bd51a259e16608b3fd7b578f5dd1292a45",
      "tree": "1c00bb480bf90c9516c983ee373e7825f49b42f6",
      "parents": [
        "e6d6e3420d511cd7552a95d1f04bd4c80a9ddb34"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Wed Jul 01 21:26:48 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Jul 10 15:01:49 2009 -0400"
      },
      "message": "cfg80211: remove wireless_dev-\u003ebssid\n\nThis variable isn\u0027t necessary -- the wext code keeps\ntrack of the BSSID itself, and otherwise we have\ncurrent_bss.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "cbe8fa9c5e88fd5f554ebc519af3b0ed17dde0dd",
      "tree": "0ec44646879e49f7254ba15970ca9a168bc00d8f",
      "parents": [
        "4e943900fb9675d3a5ebdabc2cd4a9a54edace97"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Sat May 09 20:09:03 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon May 11 15:24:07 2009 -0400"
      },
      "message": "cfg80211: put wext data into substructure\n\nTo make it more apparent in the code what is for wext\nonly (and needs to be #ifdef\u0027ed) put all the info for\nwext into a substruct in each wireless_dev.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "8e30bc55de98c000b0b836cb42525c82f605f191",
      "tree": "6b413976c2064157c3268b87921d4e2a7595f831",
      "parents": [
        "e255d5eb2b478eec1416b46aea03798b64355402"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Wed Apr 22 17:45:38 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Apr 22 16:57:20 2009 -0400"
      },
      "message": "nl80211: allow configuring IBSS beacon interval\n\nMake the JOIN_IBSS command look at the beacon interval\nattribute to see if the user requested a specific beacon\ninterval, if not default to 100 TU (wext too).\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "9d308429a9fd0fa644f0b748f6241631f74a6cda",
      "tree": "944b813829d21665f05e579bd97fd5c070f7ddf8",
      "parents": [
        "b9a5f8cab751d362f7c2d94899ca788c22fcd1ef"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Mon Apr 20 18:43:46 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Apr 22 16:57:17 2009 -0400"
      },
      "message": "cfg80211: clear WEXT SSID when clearing IBSS\n\nWhen we leave an IBSS, we should clear the SSID and not just the\nBSSID, but since WEXT allows configuring while the interface is\ndown we must not clear it when leaving due to taking the iface\ndown, so some complications are needed.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "d323655372590c533c275b1d798f9d1221efb5c6",
      "tree": "7eb0e7ecb88b09cead5a36b5aa93328b199e5c25",
      "parents": [
        "af8cdcd828ad751fae8e6cbfe94eef9f2f23b14b"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Mon Apr 20 14:31:42 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Apr 22 16:57:17 2009 -0400"
      },
      "message": "cfg80211: clean up includes\n\nTrying to separate header files into net/wireless.h and\nnet/cfg80211.h has been a source of confusion. Remove\nnet/wireless.h (because there also is the linux/wireless.h)\nand subsume everything into net/cfg80211.h -- except the\ndefinitions for regulatory structures which get moved to\na new header net/regulatory.h.\n\nThe \"new\" net/cfg80211.h is now divided into sections.\n\nThere are no real changes in this patch but code shuffling\nand some very minor documentation fixes.\n\nI have also, to make things reflect reality, put in a\ncopyright line for Luis to net/regulatory.h since that\nis probably exclusively written by him but was formerly\nin a file that only had my copyright line.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nCc: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "04a773ade0680d862b479d7219973df60f7a3834",
      "tree": "fc759eb79099fefd7f1329bcb2b703008cb0adfe",
      "parents": [
        "691597cb26f236ac7471f1adf925a134c86799d6"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Sun Apr 19 21:24:32 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Apr 22 16:57:17 2009 -0400"
      },
      "message": "cfg80211/nl80211: add IBSS API\n\nThis adds IBSS API along with (preliminary) wext handlers.\nThe wext handlers can only do IBSS so you need to call them\nfrom your own wext handlers if the mode is IBSS.\n\nThe nl80211 API requires\n * an SSID\n * a channel (frequency) for the case that a new IBSS\n   has to be created\n\nIt optionally supports\n * a flag to fix the channel\n * a fixed BSSID\n\nThe cfg80211 code also takes care to leave the IBSS before\nthe netdev is set down. If wireless extensions are used, it\nalso caches values when the interface is down and instructs\nthe driver to join when the interface is set up.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    }
  ]
}