)]}'
{
  "log": [
    {
      "commit": "619b6e18fce20e4b2d0082cde989f37e1be7b3e1",
      "tree": "b56120c0de584f6672aa7e4533163435613f5203",
      "parents": [
        "20d60d9973c3b441902b0a3f4f6f7e7ade08f77d"
      ],
      "author": {
        "name": "Maciej W. Rozycki",
        "email": "macro@linux-mips.org",
        "time": "Tue Oct 23 12:43:25 2007 +0100"
      },
      "committer": {
        "name": "Ralf Baechle",
        "email": "ralf@linux-mips.org",
        "time": "Tue Jan 29 10:14:55 2008 +0000"
      },
      "message": "[MIPS] R4000/R4400 daddiu erratum workaround\n\n This complements the generic R4000/R4400 errata workaround code and adds \nbits for the daddiu problem.  In most places it just modifies handwritten \nassembly code so that the assembler is allowed to use a temporary register \nas daddiu may now be treated as a macro that expands to a sequence of li \nand daddu.  It is the AT register or, where AT is unavailable or used \nexplicitly for another purpose, an explicitly-named register is selected, \nusing the .set at\u003d\u003creg\u003e feature added recently to gas.  This feature is \nonly used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the \nworkaround remains disabled, the required version of binutils stays \nunchanged.\n\n Similarly, daddiu instructions put in branch delay slots in noreorder \nfragments are now taken out of them and the assembler is allowed to \nreorder them itself as possible (which it does making the whole idea of \nscheduling them into delay slots manually questionable).\n\n Also in the very few places where such a simple conversion was not \npossible, a handcoded longer sequence is implemented.\n\n Other than that there are changes to code responsible for building the \nTLB fault and page clear/copy handlers to avoid daddiu as appropriate.  \nThese are only effective if the erratum is verified to be present at the \nrun time.\n\n Finally there is a trivial update to __delay(), because it uses daddiu in \na branch delay slot.\n\nSigned-off-by: Maciej W. Rozycki \u003cmacro@linux-mips.org\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n"
    },
    {
      "commit": "20d60d9973c3b441902b0a3f4f6f7e7ade08f77d",
      "tree": "2dbadcb5600fcb486612ec30d972e6c29195ee1d",
      "parents": [
        "2b22c034d04d3632a339d14d5803c8f94e412608"
      ],
      "author": {
        "name": "Maciej W. Rozycki",
        "email": "macro@linux-mips.org",
        "time": "Tue Oct 23 12:43:11 2007 +0100"
      },
      "committer": {
        "name": "Ralf Baechle",
        "email": "ralf@linux-mips.org",
        "time": "Tue Jan 29 10:14:54 2008 +0000"
      },
      "message": "[MIPS] R4000/R4400 errata workarounds\n\n This is the gereric part of R4000/R4400 errata workarounds.  They include \ncompiler and assembler support as well as some source code modifications \nto address the problems with some combinations of multiply/divide+shift \ninstructions as well as the daddi and daddiu instructions.\n\n Changes included are as follows:\n\n1. New Kconfig options to select workarounds by platforms as necessary.\n\n2. Arch top-level Makefile to pass necessary options to the compiler; also \n   incompatible configurations are detected (-mno-sym32 unsupported as \n   horribly intrusive for little gain).\n\n3. Bug detection updated and shuffled -- the multiply/divide+shift problem \n   is lethal enough that if not worked around it makes the kernel crash in \n   time_init() because of a division by zero; the daddiu erratum might \n   also trigger early potentially, though I have not observed it.  On the \n   other hand the daddi detection code requires the exception subsystem to \n   have been initialised (and is there mainly for information).\n\n4. r4k_daddiu_bug() added so that the existence of the erratum can be \n   queried by code at the run time as necessary; useful for generated code \n   like TLB fault and copy/clear page handlers.\n\n5. __udelay() updated as it uses multiplication in inline assembly.\n\n Note that -mdaddi requires modified toolchain (which has been maintained \nby myself and available from my site for ~4years now -- versions covered \nare GCC 2.95.4 - 4.1.2 and binutils from 2.13 onwards).  The -mfix-r4000 \nand -mfix-r4400 have been standard for a while though.\n\nSigned-off-by: Maciej W. Rozycki \u003cmacro@linux-mips.org\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n"
    },
    {
      "commit": "21a151d8ca3aa74ee79f9791a9d4dc370d3e0636",
      "tree": "8556b3a32ded6a49225beb4a7aa4447cc87a0e00",
      "parents": [
        "49a89efbbbcc178a39555c43bd59a7593c429664"
      ],
      "author": {
        "name": "Ralf Baechle",
        "email": "ralf@linux-mips.org",
        "time": "Thu Oct 11 23:46:15 2007 +0100"
      },
      "committer": {
        "name": "Ralf Baechle",
        "email": "ralf@linux-mips.org",
        "time": "Thu Oct 11 23:46:15 2007 +0100"
      },
      "message": "[MIPS] checkfiles: Fix \"need space after that \u0027,\u0027\" errors.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n"
    },
    {
      "commit": "83598f1cb06101e972b1f5aaf3408eb729622fa8",
      "tree": "487203f56343ff185d835295e9ddf745d6a1df5d",
      "parents": [
        "c9d06962233bd0ce9bf46b007900eb88e716e948"
      ],
      "author": {
        "name": "Deepak Saxena",
        "email": "dsaxena@plexity.net",
        "time": "Mon Mar 19 16:49:45 2007 -0700"
      },
      "committer": {
        "name": "Ralf Baechle",
        "email": "ralf@linux-mips.org",
        "time": "Sat Mar 24 17:01:49 2007 +0000"
      },
      "message": "[MIPS] Make MIPS udelay() preempt safe under DEBUG_PREEMPT\n\nSigned-off-by: Manish Lachwani \u003cmlachwani@mvista.com\u003e\nSigned-off-by: Deepak Saxena \u003cdsaxena@mvista.com\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n"
    },
    {
      "commit": "cee4cca740d209bcb4b9857baa2253d5ba4e3fbe",
      "tree": "88a23004393ea4a32cad79839479c8e653e401d6",
      "parents": [
        "2edc322d420a4cec8dbc184a1220ecd7fa9f8ae6",
        "9348f0de2d2b541b4ba64fb1f4efee9710a3d731"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Tue Jun 20 15:10:08 2006 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Tue Jun 20 15:10:08 2006 -0700"
      },
      "message": "Merge git://git.infradead.org/hdrcleanup-2.6\n\n* git://git.infradead.org/hdrcleanup-2.6: (63 commits)\n  [S390] __FD_foo definitions.\n  Switch to __s32 types in joystick.h instead of C99 types for consistency.\n  Add \u003csys/types.h\u003e to headers included for userspace in \u003clinux/input.h\u003e\n  Move inclusion of \u003clinux/compat.h\u003e out of user scope in asm-x86_64/mtrr.h\n  Remove struct fddi_statistics from user view in \u003clinux/if_fddi.h\u003e\n  Move user-visible parts of drivers/s390/crypto/z90crypt.h to include/asm-s390\n  Revert include/media changes: Mauro says those ioctls are only used in-kernel(!)\n  Include \u003clinux/types.h\u003e and use __uXX types in \u003clinux/cramfs_fs.h\u003e\n  Use __uXX types in \u003clinux/i2o_dev.h\u003e, include \u003clinux/ioctl.h\u003e too\n  Remove private struct dx_hash_info from public view in \u003clinux/ext3_fs.h\u003e\n  Include \u003clinux/types.h\u003e and use __uXX types in \u003clinux/affs_hardblocks.h\u003e\n  Use __uXX types in \u003clinux/divert.h\u003e for struct divert_blk et al.\n  Use __u32 for elf_addr_t in \u003casm-powerpc/elf.h\u003e, not u32. It\u0027s user-visible.\n  Remove PPP_FCS from user view in \u003clinux/ppp_defs.h\u003e, remove __P mess entirely\n  Use __uXX types in user-visible structures in \u003clinux/nbd.h\u003e\n  Don\u0027t use \u0027u32\u0027 in user-visible struct ip_conntrack_old_tuple.\n  Use __uXX types for S390 DASD volume label definitions which are user-visible\n  S390 BIODASDREADCMB ioctl should use __u64 not u64 type.\n  Remove unneeded inclusion of \u003clinux/time.h\u003e from \u003clinux/ufs_fs.h\u003e\n  Fix private integer types used in V4L2 ioctls.\n  ...\n\nManually resolve conflict in include/linux/mtd/physmap.h\n"
    },
    {
      "commit": "5ee823507b3c7d2187df2160125a4f64232d3a60",
      "tree": "f5109154f9ea442581cf0000dd5c3faa3466310f",
      "parents": [
        "f3bf07b9a367c342bcbc9f47d525d3cf5e8b4f3b"
      ],
      "author": {
        "name": "Ralf Baechle",
        "email": "ralf@linux-mips.org",
        "time": "Tue May 23 16:37:32 2006 +0100"
      },
      "committer": {
        "name": "Ralf Baechle",
        "email": "ralf@linux-mips.org",
        "time": "Tue Jun 06 00:15:10 2006 +0100"
      },
      "message": "[MIPS] Fix instable BogoMIPS on multi-issue processors.\n\nIncrease alignment of BogoMIPS loop to 8 bytes.  Having the delay loop\noverlap cache line boundaries may cause instable delays.\n    \nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n"
    },
    {
      "commit": "62c4f0a2d5a188f73a94f2cb8ea0dba3e7cf0a7f",
      "tree": "e85ca2d0dd43f90dccf758338764c3caa55f333f",
      "parents": [
        "089f26d5e31b7bf42a9a8fefec08b30cd27f4b0e"
      ],
      "author": {
        "name": "David Woodhouse",
        "email": "dwmw2@infradead.org",
        "time": "Wed Apr 26 12:56:16 2006 +0100"
      },
      "committer": {
        "name": "David Woodhouse",
        "email": "dwmw2@infradead.org",
        "time": "Wed Apr 26 12:56:16 2006 +0100"
      },
      "message": "Don\u0027t include linux/config.h from anywhere else in include/\n\nSigned-off-by: David Woodhouse \u003cdwmw2@infradead.org\u003e\n"
    },
    {
      "commit": "f12555d24ca636569b51c6f104aab41b2bba8c32",
      "tree": "7fa3b59cf1d8a2d11212bcdda76defecbc5076cc",
      "parents": [
        "6c35585273b26a580b2e2ad3d6a7db282308eec5"
      ],
      "author": {
        "name": "Atsushi Nemoto",
        "email": "anemo@mba.ocn.ne.jp",
        "time": "Wed Nov 30 13:33:26 2005 +0900"
      },
      "committer": {
        "name": "",
        "email": "ralf@denk.linux-mips.net",
        "time": "Tue Jan 10 13:39:04 2006 +0000"
      },
      "message": "MIPS: Fix mdelay(1) for 64bit kernel with HZ \u003d\u003d 1000\n    \nmdelay(1) (i.e. udelay(1000)) does not work correctly due to overflow.\n    \n1000 * 0x004189374BC6A7f0 \u003d 0x10000000000000180 (\u003e\u003d 2**64)\n    \n0x004189374BC6A7ef (0x004189374BC6A7f0 - 1) is OK and it is exactly\nsame as catchall case (0x8000000000000000UL / (500000 / HZ)).\n    \nSigned-off-by: Atsushi Nemoto \u003canemo@mba.ocn.ne.jp\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n"
    },
    {
      "commit": "a0f08209c685b4f7dccaf013da74e0e80986c477",
      "tree": "4226fd9fc00daa4db855ba5df0e12e990f55efe6",
      "parents": [
        "53c2df2f4ebbc1d8231ca7cc13ac5381230888b1"
      ],
      "author": {
        "name": "Atsushi Nemoto",
        "email": "anemo@mba.ocn.ne.jp",
        "time": "Sat Nov 05 02:02:54 2005 +0900"
      },
      "committer": {
        "name": "Ralf Baechle",
        "email": "ralf@linux-mips.org",
        "time": "Mon Nov 07 18:05:39 2005 +0000"
      },
      "message": "Define MAX_UDELAY_MS\n    \nIf HZ was 1000, mdelay(2) cause overflow on multiplication in\n__udelay.  We should define MAX_UDELAY_MS properly to prevent this.\n    \nSigned-off-by: Atsushi Nemoto \u003canemo@mba.ocn.ne.jp\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n"
    },
    {
      "commit": "88de09f351e0b38a0991f4abd4ff6691b565d2ef",
      "tree": "93ade12f4c18047577f9208bbd2e46ab607851fd",
      "parents": [
        "cce812c99c2169f7d3157b6f7fd38cde9af9c6c6"
      ],
      "author": {
        "name": "Ralf Baechle",
        "email": "ralf@linux-mips.org",
        "time": "Mon Apr 18 10:40:09 2005 +0000"
      },
      "committer": {
        "name": "Ralf Baechle",
        "email": "ralf@linux-mips.org",
        "time": "Sat Oct 29 19:31:08 2005 +0100"
      },
      "message": "Need to include smp.h for the definition of smp_processor_id().\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n"
    },
    {
      "commit": "f03da6e28ea2d20f1a8451869fd1c9ea9935022b",
      "tree": "09a2e8041c2d4e1dcf9d35990caef9677db12218",
      "parents": [
        "589391a0fe229573439994b3be2cc9377722cf3d"
      ],
      "author": {
        "name": "Ralf Baechle",
        "email": "ralf@linux-mips.org",
        "time": "Wed Apr 13 13:37:32 2005 +0000"
      },
      "committer": {
        "name": "Ralf Baechle",
        "email": "ralf@linux-mips.org",
        "time": "Sat Oct 29 19:31:05 2005 +0100"
      },
      "message": "Fix BogoMIPS display on UP and some minor cosmetical things.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n"
    },
    {
      "commit": "875d43e72b5bf22161a81de7554f88eccf8a51ae",
      "tree": "a676fe7298b478b7ee9fe7be9cb07c9a0b928370",
      "parents": [
        "63fb6fd1c86181d9dd9ba0e6e6082799e149b56b"
      ],
      "author": {
        "name": "Ralf Baechle",
        "email": "ralf@linux-mips.org",
        "time": "Sat Sep 03 15:56:16 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@evo.osdl.org",
        "time": "Mon Sep 05 00:06:06 2005 -0700"
      },
      "message": "[PATCH] mips: clean up 32/64-bit configuration\n\nStart cleaning 32-bit vs. 64-bit configuration.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
      "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d",
      "parents": [],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n"
    }
  ]
}