)]}' { "log": [ { "commit": "ab6e14b712e2d8e0c4dd3cf1a72083b52104853a", "tree": "61482c08249c4cc242c4f18600be99177e137611", "parents": [ "18fbef9e5242e146fe0264cf719a498785102841" ], "author": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Wed Jan 30 23:27:58 2008 +0100" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Wed Jan 30 23:27:58 2008 +0100" }, "message": "ia64: on UP percpu variables are not small memory model\n\nTony says:\n\n| The CONFIG_SMP\u003dn path in ia64 makes quite radical changes ... rather\n| than putting all the per-cpu stuff into the top 64K of address space\n| and providing a per-cpu TLB mapping for that range to a different\n| physical address ... it just makes all the per-cpu stuff link as ordinary\n| variables in .data.\n\nthe new generic percpu code got confused about this as PER_CPU_ATTRIBUTES\nwas defined even on UP, so it picked up that small memory model - which\nwas not possible to get linked. The right fix is to only define that\non SMP. This resolved the build failures in my cross-compiling environment.\n\nalso link these variables into the .percpu section even on UP - some\nassembly code has offset dependencies. (such as GET_IA64_MCA_DATA() in\narch/ia64/kernel/mca_asm.S)\n\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\nAcked-by: Tony Luck \u003ctony.luck@intel.com\u003e\n" }, { "commit": "05991bef104051d47e2160ee9499186aff7da5ad", "tree": "ff6b00b2d407acd0b743d4272f4577e97e09c823", "parents": [ "3afc620229ccc8214ef96fd0e7db26d79f788167" ], "author": { "name": "travis@sgi.com", "email": "travis@sgi.com", "time": "Wed Jan 30 23:27:58 2008 +0100" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Wed Jan 30 23:27:58 2008 +0100" }, "message": "ia64: use generic percpu\n\nia64 has a special processor specific mapping that can be used to locate the\noffset for the current per cpu area.\n\nCc: linux-ia64@vger.kernel.org\nSigned-off-by: Mike Travis \u003ctravis@sgi.com\u003e\nAcked-by: Tony Luck \u003ctony.luck@intel.com\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "6ddfee0e79e141550376177b355d6c90ba6da88c", "tree": "ed19ac446e1e4510712b87ee5dae4d6492324939", "parents": [ "914c82694cadbab511f2aee8a59c89be2938bace" ], "author": { "name": "travis@sgi.com", "email": "travis@sgi.com", "time": "Wed Jan 30 23:27:58 2008 +0100" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Wed Jan 30 23:27:58 2008 +0100" }, "message": "modules: fold percpu_modcopy into module.c\n\npercpu_modcopy() is defined multiple times in arch files. However, the only\nuser is module.c. Put a static definition into module.c and remove\nthe definitions from the arch files.\n\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "5280e004fc22314122c84978c0b6a741cf96dc0f", "tree": "008b96d81a924be764629f62f98fa5f7c9e04773", "parents": [ "b32ef636a59aad12f9f9b5dc34c93222842c58ba" ], "author": { "name": "travis@sgi.com", "email": "travis@sgi.com", "time": "Wed Jan 30 13:32:52 2008 +0100" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Wed Jan 30 13:32:52 2008 +0100" }, "message": "percpu: move arch XX_PER_CPU_XX definitions into linux/percpu.h\n\n- Special consideration for IA64: Add the ability to specify\n arch specific per cpu flags\n\n- remove .data.percpu attribute from DEFINE_PER_CPU for non-smp case.\n\nThe arch definitions are all the same. So move them into linux/percpu.h.\n\nWe cannot move DECLARE_PER_CPU since some include files just include\nasm/percpu.h to avoid include recursion problems.\n\nCc: Rusty Russell \u003crusty@rustcorp.com.au\u003e\nCc: Andi Kleen \u003cak@suse.de\u003e\nSigned-off-by: Christoph Lameter \u003cclameter@sgi.com\u003e\nSigned-off-by: Mike Travis \u003ctravis@sgi.com\u003e\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "d7c4086af7b51144bdedda266ffa66617ec7d4ed", "tree": "db9e1763747056e6d4c53d9842e5c90e9edabd66", "parents": [ "113134fcbca83619be4c68d0ca66db6093777b5d" ], "author": { "name": "Yu Luming", "email": "luming.yu@intel.com", "time": "Mon Oct 29 11:21:45 2007 -0700" }, "committer": { "name": "Tony Luck", "email": "tony.luck@intel.com", "time": "Mon Oct 29 11:21:45 2007 -0700" }, "message": "[IA64] fix typo in per_cpu_offset\n\nthere is a typo in the definition of per_cpu_offset because, for ia64,\nthe __per_cpu_offset is an array.\n\nSigned-off-by: Yu Luming \u003cluming.yu@intel.com\u003e\nSigned-off-by: Tony Luck \u003ctony.luck@intel.com\u003e\n" }, { "commit": "5fb7dc37dc16fbc8b80d81318a582201ef7e280d", "tree": "4d6bb4441ece64380e7186ebadd35ad2f5486f9f", "parents": [ "3d7e33825d8799115dd2495c9944badd3272a623" ], "author": { "name": "Fenghua Yu", "email": "fenghua.yu@intel.com", "time": "Thu Jul 19 01:48:12 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Jul 19 10:04:44 2007 -0700" }, "message": "define new percpu interface for shared data\n\nper cpu data section contains two types of data. One set which is\nexclusively accessed by the local cpu and the other set which is per cpu,\nbut also shared by remote cpus. In the current kernel, these two sets are\nnot clearely separated out. This can potentially cause the same data\ncacheline shared between the two sets of data, which will result in\nunnecessary bouncing of the cacheline between cpus.\n\nOne way to fix the problem is to cacheline align the remotely accessed per\ncpu data, both at the beginning and at the end. Because of the padding at\nboth ends, this will likely cause some memory wastage and also the\ninterface to achieve this is not clean.\n\nThis patch:\n\nMoves the remotely accessed per cpu data (which is currently marked\nas ____cacheline_aligned_in_smp) into a different section, where all the data\nelements are cacheline aligned. And as such, this differentiates the local\nonly data and remotely accessed data cleanly.\n\nSigned-off-by: Fenghua Yu \u003cfenghua.yu@intel.com\u003e\nAcked-by: Suresh Siddha \u003csuresh.b.siddha@intel.com\u003e\nCc: Rusty Russell \u003crusty@rustcorp.com.au\u003e\nCc: Christoph Lameter \u003cclameter@sgi.com\u003e\nCc: \u003clinux-arch@vger.kernel.org\u003e\nCc: \"Luck, Tony\" \u003ctony.luck@intel.com\u003e\nCc: Andi Kleen \u003cak@suse.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "a875a69f8b00a38b4f40d9632a4fc71a159f0e0d", "tree": "5c9296441514663354a4d70ab2320f7e185d7c10", "parents": [ "8d8fdf5c76816e5263073008f03f097ffc713db3" ], "author": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Mon Jul 03 00:24:26 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Mon Jul 03 15:27:00 2006 -0700" }, "message": "[PATCH] lockdep: add per_cpu_offset()\n\nAdd the per_cpu_offset() generic method. (used by the lock validator)\n\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\nSigned-off-by: Arjan van de Ven \u003carjan@linux.intel.com\u003e\nCc: Rusty Russell \u003crusty@rustcorp.com.au\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "bfe5d834195b3089b8846577311340376cc0f450", "tree": "52470de0fe87ff8372700e3472735cd5c14cee9d", "parents": [ "6ceab8a936c302c0cea2bfe55617c76e2f5746fa" ], "author": { "name": "Paul Mackerras", "email": "paulus@samba.org", "time": "Sun Jun 25 05:47:14 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Sun Jun 25 10:01:01 2006 -0700" }, "message": "[PATCH] Define __raw_get_cpu_var and use it\n\nThere are several instances of per_cpu(foo, raw_smp_processor_id()), which\nis semantically equivalent to __get_cpu_var(foo) but without the warning\nthat smp_processor_id() can give if CONFIG_DEBUG_PREEMPT is enabled. For\nthose architectures with optimized per-cpu implementations, namely ia64,\npowerpc, s390, sparc64 and x86_64, per_cpu() turns into more and slower\ncode than __get_cpu_var(), so it would be preferable to use __get_cpu_var\non those platforms.\n\nThis defines a __raw_get_cpu_var(x) macro which turns into per_cpu(x,\nraw_smp_processor_id()) on architectures that use the generic per-cpu\nimplementation, and turns into __get_cpu_var(x) on the architectures that\nhave an optimized per-cpu implementation.\n\nSigned-off-by: Paul Mackerras \u003cpaulus@samba.org\u003e\nAcked-by: David S. Miller \u003cdavem@davemloft.net\u003e\nAcked-by: Ingo Molnar \u003cmingo@elte.hu\u003e\nAcked-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\nCc: Rusty Russell \u003crusty@rustcorp.com.au\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "62c4f0a2d5a188f73a94f2cb8ea0dba3e7cf0a7f", "tree": "e85ca2d0dd43f90dccf758338764c3caa55f333f", "parents": [ "089f26d5e31b7bf42a9a8fefec08b30cd27f4b0e" ], "author": { "name": "David Woodhouse", "email": "dwmw2@infradead.org", "time": "Wed Apr 26 12:56:16 2006 +0100" }, "committer": { "name": "David Woodhouse", "email": "dwmw2@infradead.org", "time": "Wed Apr 26 12:56:16 2006 +0100" }, "message": "Don\u0027t include linux/config.h from anywhere else in include/\n\nSigned-off-by: David Woodhouse \u003cdwmw2@infradead.org\u003e\n" }, { "commit": "11c80c8367db0a9d342529ed74464670cd86a1f6", "tree": "d4625a9565866dc6565972b069c57cdedb7e0f27", "parents": [ "c7ea4b31fd962b4baadb42c0b8d7c6851c584102" ], "author": { "name": "Jan Beulich", "email": "JBeulich@novell.com", "time": "Thu Jun 23 00:09:59 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Thu Jun 23 09:45:28 2005 -0700" }, "message": "[PATCH] adjust per_cpu definition in non-SMP case\n\nFix (in the architectures I\u0027m actually building for) the UP definition of\nper_cpu so that the cpu specified may be any expression, not just an\nidentifier or a suffix expression.\n\nSigned-off-by: Jan Beulich \u003cjbeulich@novell.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d", "parents": [], "author": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n" } ] }