)]}' { "log": [ { "commit": "eed2a12f1ed9aabf0676f4d0db34aad51976c5c6", "tree": "a86d3ff7c6a9840131d38af3dfc907c255bfbd99", "parents": [ "47a0200d535f08ac8f784a709c48995ca0b10288" ], "author": { "name": "Mahesh Bandewar", "email": "maheshb@google.com", "time": "Wed May 04 15:30:11 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun May 08 15:59:12 2011 -0700" }, "message": "net: Allow ethtool to set interface in loopback mode.\n\nThis patch enables ethtool to set the loopback mode on a given interface.\nBy configuring the interface in loopback mode in conjunction with a policy\nroute / rule, a userland application can stress the egress / ingress path\nexposing the flows of the change in progress and potentially help developer(s)\nunderstand the impact of those changes without even sending a packet out\non the network.\n\nFollowing set of commands illustrates one such example -\n a) ip -4 addr add 192.168.1.1/24 dev eth1\n b) ip -4 rule add from all iif eth1 lookup 250\n c) ip -4 route add local 0/0 dev lo proto kernel scope host table 250\n d) arp -Ds 192.168.1.100 eth1\n e) arp -Ds 192.168.1.200 eth1\n f) sysctl -w net.ipv4.ip_nonlocal_bind\u003d1\n g) sysctl -w net.ipv4.conf.all.accept_local\u003d1\n # Assuming that the machine has 8 cores\n h) taskset 000f netserver -L 192.168.1.200\n i) taskset 00f0 netperf -t TCP_CRR -L 192.168.1.100 -H 192.168.1.200 -l 30\n\nSigned-off-by: Mahesh Bandewar \u003cmaheshb@google.com\u003e\nAcked-by: Ben Hutchings \u003cbhutchings@solarflare.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "57cc71bc3c0cf18bfd1b7bc8cd0eb6c303da24c5", "tree": "eda8d1e01c124a4013979ae0aed6539cf80a3b4f", "parents": [ "02e73c1edc3746e308d1768a27fdc8121f641ab1" ], "author": { "name": "Yaniv Rosner", "email": "yanivr@broadcom.com", "time": "Mon May 02 21:30:08 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun May 08 15:42:43 2011 -0700" }, "message": "ethtool: Add 20G bit definitions\n\nAdd 20G supported and advertising bit definitions.\n20G will be supported with the 57840 chips.\n\nSigned-off-by: Yaniv Rosner \u003cyanivr@broadcom.com\u003e\nSigned-off-by: Eilon Greenstein \u003ceilong@broadcom.com\u003e\n------\n include/linux/ethtool.h | 4 ++++\n 1 files changed, 4 insertions(+), 0 deletions(-)\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "1ab7b6ac2709d0eb05a7144cd0e14faa3a7ea162", "tree": "f3ac5ea7a7e2d9f1c1fa3be7284329ec42d96191", "parents": [ "534eacb5d4e7bafbdb60386678afeffb7966c375" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Thu Apr 14 23:46:06 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun May 08 12:49:33 2011 -0700" }, "message": "ethtool: remove phys_id from ethtool_ops\n\nAfter that all the upstream kernel drivers now use phys_id,\nand the old ethtool_ops interface (phys_id) can be removed.\n\nSigned-off-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "7143b7d41218d4fc2ea33e6056c73609527ae687", "tree": "9a842daee1deb57a2c8084bc5d300f6d8428fe34", "parents": [ "90864fbc7639d7a2300c67a18c9fb9fbcf7d51d2", "87e9af6cc67d842cd92b52b81f3f14e665e7ab05" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu May 05 14:59:02 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu May 05 14:59:02 2011 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\tdrivers/net/tg3.c\n" }, { "commit": "90864fbc7639d7a2300c67a18c9fb9fbcf7d51d2", "tree": "6951c8d0e529dbfc7c4cec75d4cec63350e39b7c", "parents": [ "228e548e602061b08ee8e8966f567c12aa079682", "a70171dce9cd44cb06c7d299eba9fa87a8933045" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu May 05 14:09:28 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu May 05 14:09:28 2011 -0700" }, "message": "Merge branch \u0027for-davem\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n" }, { "commit": "228e548e602061b08ee8e8966f567c12aa079682", "tree": "4c79ecf071d6174d42da1557812a4646d0aaa5af", "parents": [ "1c5cae815d19ffe02bdfda1260949ef2b1806171" ], "author": { "name": "Anton Blanchard", "email": "anton@samba.org", "time": "Mon May 02 20:21:35 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu May 05 11:10:14 2011 -0700" }, "message": "net: Add sendmmsg socket system call\n\nThis patch adds a multiple message send syscall and is the send\nversion of the existing recvmmsg syscall. This is heavily\nbased on the patch by Arnaldo that added recvmmsg.\n\nI wrote a microbenchmark to test the performance gains of using\nthis new syscall:\n\nhttp://ozlabs.org/~anton/junkcode/sendmmsg_test.c\n\nThe test was run on a ppc64 box with a 10 Gbit network card. The\nbenchmark can send both UDP and RAW ethernet packets.\n\n64B UDP\n\nbatch pkts/sec\n1 804570\n2 872800 (+ 8 %)\n4 916556 (+14 %)\n8 939712 (+17 %)\n16 952688 (+18 %)\n32 956448 (+19 %)\n64 964800 (+20 %)\n\n64B raw socket\n\nbatch pkts/sec\n1 1201449\n2 1350028 (+12 %)\n4 1461416 (+22 %)\n8 1513080 (+26 %)\n16 1541216 (+28 %)\n32 1553440 (+29 %)\n64 1557888 (+30 %)\n\nWe see a 20% improvement in throughput on UDP send and 30%\non raw socket send.\n\n[ Add sparc syscall entries. -DaveM ]\n\nSigned-off-by: Anton Blanchard \u003canton@samba.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "a70171dce9cd44cb06c7d299eba9fa87a8933045", "tree": "5425df5f33fadc617c7dec99578d06f0d933578e", "parents": [ "5a412ad7f4c95bb5b756aa12b52646e857e7c75d", "eaef6a93bd52a2cc47b9fce201310010707afdb4" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu May 05 13:32:35 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu May 05 13:32:35 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n\nConflicts:\n\tdrivers/net/wireless/libertas/if_cs.c\n\tdrivers/net/wireless/rtlwifi/pci.c\n\tnet/bluetooth/l2cap_sock.c\n" }, { "commit": "1650629d1800bf05ad775f974e931ca2fa03b0ff", "tree": "babd283e21f033bd9d1a15ccb0d658de43421170", "parents": [ "5a412ad7f4c95bb5b756aa12b52646e857e7c75d" ], "author": { "name": "Kurt Van Dijck", "email": "kurt.van.dijck@eia.be", "time": "Tue May 03 18:40:57 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed May 04 14:08:36 2011 -0700" }, "message": "can: make struct can_proto const\n\ncommit 53914b67993c724cec585863755c9ebc8446e83b had the\nsame message. That commit did put everything in place but\ndid not make can_proto const itself.\n\nSigned-off-by: Kurt Van Dijck \u003ckurt.van.dijck@eia.be\u003e\nAcked-by: Oliver Hartkopp \u003csocketcan@hartkopp.net\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "9a1b9496cd2b013f74885218947fa7120d53e74c", "tree": "a48d2fdf14a7445a15a7553ef8b7a8732b5bcac1", "parents": [ "dd927a2694ee412b440284dd72dd8e32caada3fc" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed May 04 12:18:54 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed May 04 12:18:54 2011 -0700" }, "message": "ipv4: Pass explicit saddr/daddr args to ipmr_get_route().\n\nThis eliminates the need to use rt-\u003ert_{src,dst}.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "57a503c61db077b923e23f36050c02166a4a1db2", "tree": "5c34d25218ee315a944120aa8edb8af028791671", "parents": [ "e67f88dd12f610da98ca838822f2c9b4e7c6100e" ], "author": { "name": "Viresh KUMAR", "email": "viresh.kumar@st.com", "time": "Mon May 02 18:36:45 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue May 03 16:09:40 2011 -0700" }, "message": "net/stmmac: Move \"#include \u003clinux/platform_device.h\u003e\" to linux/stmmac.h\n\nstmmac.h uses struct platform_device and doesn\u0027t include\n\u003clinux/platform_device.h\u003e. Whereas drivers/net/stmmac/stmmac.h includes it, but\ndoesn\u0027t directly use it. And so we get following compilation warning while using\nthis file:\n\twarning: ‘struct platform_device’ declared inside parameter list\n\nThis patch includes \u003clinux/platform_device.h\u003e in linux/stmmac.h and removes it\nfrom drivers/net/stmmac/stmmac.h\n\nSigned-off-by: Viresh Kumar \u003cviresh.kumar@st.com\u003e\nAcked-by: Giuseppe Cavallaro \u003cpeppe.cavallaro@st.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "8ae6daca85c8bbd6a32c382db5e2a2a989f8bed2", "tree": "0c85476c2af6568c3d3a73a960d582d2f91a1256", "parents": [ "36504605432996590f889e33d47e2d9c581f7569" ], "author": { "name": "David Decotigny", "email": "decot@google.com", "time": "Wed Apr 27 18:32:38 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Apr 29 14:01:30 2011 -0700" }, "message": "ethtool: Call ethtool\u0027s get/set_settings callbacks with cleaned data\n\nThis makes sure that when a driver calls the ethtool\u0027s\nget/set_settings() callback of another driver, the data passed to it\nis clean. This guarantees that speed_hi will be zeroed correctly if\nthe called callback doesn\u0027t explicitely set it: we are sure we don\u0027t\nget a corrupted speed from the underlying driver. We also take care of\nsetting the cmd field appropriately (ETHTOOL_GSET/SSET).\n\nThis applies to dev_ethtool_get_settings(), which now makes sure it\nsets up that ethtool command parameter correctly before passing it to\ndrivers. This also means that whoever calls dev_ethtool_get_settings()\ndoes not have to clean the ethtool command parameter. This function\nalso becomes an exported symbol instead of an inline.\n\nAll drivers visible to make allyesconfig under x86_64 have been\nupdated.\n\nSigned-off-by: David Decotigny \u003cdecot@google.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "36504605432996590f889e33d47e2d9c581f7569", "tree": "3bf2de6d3e789fe8eb1b9ced0d796861b0310175", "parents": [ "7e610caaa5b32d3be9216f040f178e4a23b678b2" ], "author": { "name": "David Decotigny", "email": "decot@google.com", "time": "Wed Apr 27 18:32:37 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Apr 29 14:01:29 2011 -0700" }, "message": "ethtool: cosmetics: enforce const-ness in ethtool_cmd_speed\n\nThe \u0027ep\u0027 argument of ethtool_cmd_speed is not altered: advertise it in\nprotoype. +Indentation fix. Also add comments to advise using the\nethtool_cmd_speed API to get/set the link speed.\n\nSigned-off-by: David Decotigny \u003cdecot@google.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "fa2bd7ff9247f4218dfc907db14d000cd7edd862", "tree": "f84f98aa2a87b308589a814892e2a3503a7d689f", "parents": [ "c4d27ef957cd9261c0bc8488edaf8390e412cd35" ], "author": { "name": "Michał Mirosław", "email": "mirq-linux@rere.qmqm.pl", "time": "Fri Apr 22 06:31:16 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 28 13:33:08 2011 -0700" }, "message": "net: allow user to change NETIF_F_HIGHDMA\n\nNETIF_F_HIGHDMA is like any other TX offloads, so allow user to toggle it.\nThis is needed later for bridge and bonding convertsion to hw_features.\n\nSigned-off-by: Michał Mirosław \u003cmirq-linux@rere.qmqm.pl\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "1742f183fc218798dab6fcf0ded25b6608fc0a48", "tree": "47910c74f188e8dc9eb4fbefba01a1cf29de9965", "parents": [ "96339d6c490a32de35fa798ca7922d13a8538ecd" ], "author": { "name": "Michał Mirosław", "email": "mirq-linux@rere.qmqm.pl", "time": "Fri Apr 22 06:31:16 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 28 13:33:07 2011 -0700" }, "message": "net: fix netdev_increment_features()\n\nSimplify and fix netdev_increment_features() to conform to what is\nstated in netdevice.h comments about NETIF_F_ONE_FOR_ALL.\nInclude FCoE segmentation and VLAN-challedged flags in computation.\n\nSigned-off-by: Michał Mirosław \u003cmirq-linux@rere.qmqm.pl\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "68972efa657040f891c7eda07c7da8c8dd576788", "tree": "56e451d2101c37802fa043e41f55b8b5daad6b82", "parents": [ "7833aa05b8db63484b43b4b4c389cd4533140afb" ], "author": { "name": "Paul Stewart", "email": "pstew@chromium.org", "time": "Thu Apr 28 05:43:37 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 28 12:56:09 2011 -0700" }, "message": "usbnet: Resubmit interrupt URB if device is open\n\nResubmit interrupt URB if device is open. Use a flag set in\nusbnet_open() to determine this state. Also kill and free\ninterrupt URB in usbnet_disconnect().\n\n[Rebased off git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git]\n\nSigned-off-by: Paul Stewart \u003cpstew@chromium.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "0a14842f5a3c0e88a1e59fac5c3025db39721f74", "tree": "4d0832c4c9ced2503e2d899eb56952f87511d4ab", "parents": [ "b678027cb77b079bc8e5b94172995d173bdb494b" ], "author": { "name": "Eric Dumazet", "email": "eric.dumazet@gmail.com", "time": "Wed Apr 20 09:27:32 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 27 23:05:08 2011 -0700" }, "message": "net: filter: Just In Time compiler for x86-64\n\nIn order to speedup packet filtering, here is an implementation of a\nJIT compiler for x86_64\n\nIt is disabled by default, and must be enabled by the admin.\n\necho 1 \u003e/proc/sys/net/core/bpf_jit_enable\n\nIt uses module_alloc() and module_free() to get memory in the 2GB text\nkernel range since we call helpers functions from the generated code.\n\nEAX : BPF A accumulator\nEBX : BPF X accumulator\nRDI : pointer to skb (first argument given to JIT function)\nRBP : frame pointer (even if CONFIG_FRAME_POINTER\u003dn)\nr9d : skb-\u003elen - skb-\u003edata_len (headlen)\nr8 : skb-\u003edata\n\nTo get a trace of generated code, use :\n\necho 2 \u003e/proc/sys/net/core/bpf_jit_enable\n\nExample of generated code :\n\n# tcpdump -p -n -s 0 -i eth1 host 192.168.20.0/24\n\nflen\u003d18 proglen\u003d147 pass\u003d3 image\u003dffffffffa00b5000\nJIT code: ffffffffa00b5000: 55 48 89 e5 48 83 ec 60 48 89 5d f8 44 8b 4f 60\nJIT code: ffffffffa00b5010: 44 2b 4f 64 4c 8b 87 b8 00 00 00 be 0c 00 00 00\nJIT code: ffffffffa00b5020: e8 24 7b f7 e0 3d 00 08 00 00 75 28 be 1a 00 00\nJIT code: ffffffffa00b5030: 00 e8 fe 7a f7 e0 24 00 3d 00 14 a8 c0 74 49 be\nJIT code: ffffffffa00b5040: 1e 00 00 00 e8 eb 7a f7 e0 24 00 3d 00 14 a8 c0\nJIT code: ffffffffa00b5050: 74 36 eb 3b 3d 06 08 00 00 74 07 3d 35 80 00 00\nJIT code: ffffffffa00b5060: 75 2d be 1c 00 00 00 e8 c8 7a f7 e0 24 00 3d 00\nJIT code: ffffffffa00b5070: 14 a8 c0 74 13 be 26 00 00 00 e8 b5 7a f7 e0 24\nJIT code: ffffffffa00b5080: 00 3d 00 14 a8 c0 75 07 b8 ff ff 00 00 eb 02 31\nJIT code: ffffffffa00b5090: c0 c9 c3\n\nBPF program is 144 bytes long, so native program is almost same size ;)\n\n(000) ldh [12]\n(001) jeq #0x800 jt 2 jf 8\n(002) ld [26]\n(003) and #0xffffff00\n(004) jeq #0xc0a81400 jt 16 jf 5\n(005) ld [30]\n(006) and #0xffffff00\n(007) jeq #0xc0a81400 jt 16 jf 17\n(008) jeq #0x806 jt 10 jf 9\n(009) jeq #0x8035 jt 10 jf 17\n(010) ld [28]\n(011) and #0xffffff00\n(012) jeq #0xc0a81400 jt 16 jf 13\n(013) ld [38]\n(014) and #0xffffff00\n(015) jeq #0xc0a81400 jt 16 jf 17\n(016) ret #65535\n(017) ret #0\n\nSigned-off-by: Eric Dumazet \u003ceric.dumazet@gmail.com\u003e\nCc: Arnaldo Carvalho de Melo \u003cacme@infradead.org\u003e\nCc: Ben Hutchings \u003cbhutchings@solarflare.com\u003e\nCc: Hagen Paul Pfeifer \u003chagen@jauu.net\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "04ad1fb2640a4f23e99ccb705c179d64abac03f2", "tree": "7a2cf668c2f010dc61e072c68e82ee68b685c61a", "parents": [ "a6ef8143839a8640532ba473906beb1a38b03e29" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Sat Apr 23 19:30:29 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 26 15:50:29 2011 -0400" }, "message": "ssb: update reject bit for Target State Low\n\nMy 14e4:4315 is SSB_IDLOW_SSBREV_26:\nread32 0xfaafcff8 -\u003e 0x600422d5\nMy 14e4:4328 is SSB_IDLOW_SSBREV_24:\nread32 0xfaafcff8 -\u003e 0x400422c5\nMy 14e4:432b is SSB_IDLOW_SSBREV_26 again:\nread32 0xfaafcff8 -\u003e 0x600422d5\n\nFor all of them wl driver is using 0x2 reject bit:\nwrite32(0xf98) \u003c- 0x00010002\nSo it seems SSB 2.3 is the exception using another bit.\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9835a30e980561082beb02ce724f6e555787bc19", "tree": "ed934f465f29125162c795e973e9afc741c70f71", "parents": [ "6dde1aabf6759848512f19d76b89ee473584c46a" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Sun Apr 24 11:04:19 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 25 14:50:20 2011 -0400" }, "message": "ssb: cc: clear GPIOPULL registers on init\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9f2e731d1d278d853def1567735d8a823668a3c8", "tree": "5377f196137b4b66540d5a0332585004c804be2e", "parents": [ "767ad6a0a2342d42f6f03b50198418b1475e0a7b" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Wed Apr 20 11:12:30 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 25 14:50:15 2011 -0400" }, "message": "ssb: cc: add \u0026 fix defines\n\nWe probably got false positive results for checking PLL being down.\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f2f5f2a1cedc803a5a517557d436e6cb10c007de", "tree": "6386a001a22615d8591179cf7204f1a902d65f1f", "parents": [ "35d5f56125aba8667ac12277dff02ce51efbee16" ], "author": { "name": "Vasanthakumar Thiagarajan", "email": "vasanth@atheros.com", "time": "Tue Apr 19 19:29:01 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 25 14:50:08 2011 -0400" }, "message": "ath9k_hw: Get AHB clock information from ath9k_platform_data\n\nAdd a bool in ath9k_platform_data to pass AHB clock speed information.\nDriver needs this to configure PLL on some SOCs.\n\nSigned-off-by: Vasanthakumar Thiagarajan \u003cvasanth@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e55034e978970f5a058dfa9c9cc923ff75fc6a12", "tree": "dcb40fbd52bd0db1f641d7e64aa472a7aee64328", "parents": [ "73b48099cc265f88fa1255f3f43e52fe6a94fd5c", "cf27d8677515441602f5e4e40f90448e964504b8" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 25 14:36:35 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 25 14:36:35 2011 -0400" }, "message": "Merge branch \u0027for-linville\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx\n" }, { "commit": "cfef6047c4027a8448ec8dafeaf2bb362cc882e4", "tree": "c254bd25aa8b4b0696b5b5cc45d8e30c7c1bb9dd", "parents": [ "b71d1d426d263b0b6cb5760322efebbfc89d4463", "73b48099cc265f88fa1255f3f43e52fe6a94fd5c" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 25 14:34:25 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 25 14:34:25 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n\nConflicts:\n\tdrivers/net/wireless/iwlwifi/iwl-core.c\n\tdrivers/net/wireless/rt2x00/rt2x00queue.c\n\tdrivers/net/wireless/rt2x00/rt2x00queue.h\n" }, { "commit": "cbc6a6ed0900aed789b5ca77192845f2f987af70", "tree": "d7aa6e267e34417a857121de210ffd47f8e0eb2a", "parents": [ "bb411b4db2767cfd4a99b3328da843ce4ea1596a" ], "author": { "name": "Antonio Ospite", "email": "ospite@studenti.unina.it", "time": "Wed Apr 13 21:40:45 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 19 15:38:02 2011 -0400" }, "message": "rfkill: Regulator consumer driver for rfkill\n\nAdd a regulator consumer driver for rfkill to enable controlling radio\ntransmitters connected to voltage regulators using the regulator\nframework.\n\nA new \"vrfkill\" virtual supply is provided to use in platform code.\n\nSigned-off-by: Guiming Zhuo \u003cgmzhuo@gmail.com\u003e\nSigned-off-by: Antonio Ospite \u003cospite@studenti.unina.it\u003e\nReviewed-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4805347c1eb12cfe79f42a12a5442ee01590a9c0", "tree": "cb9d8b3cfc78d8411f0cea7b06c6472cdd35bb9a", "parents": [ "e1943424e43974f85b82bb31eaf832823bf49ce7", "91eb7c08c6cb3b8eeba1c61f5753c56dcb77f018" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Apr 19 11:24:06 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Apr 19 11:24:06 2011 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6\n" }, { "commit": "341b7cde6ccc60672fcd7fc84dd24a1b7c0b8d94", "tree": "25b284f436f24a0c21e4a656531831619002757c", "parents": [ "d2f4d47d84f8c665ab9babb2cc84d2e7872a96e1" ], "author": { "name": "Ido Yariv", "email": "ido@wizery.com", "time": "Thu Mar 31 10:07:01 2011 +0200" }, "committer": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Tue Apr 19 16:49:20 2011 +0300" }, "message": "wl12xx: Handle platforms without level trigger interrupts\n\nSome platforms are incapable of triggering on level interrupts. Add a\nplatform quirks member in the platform data structure, as well as an\nedge interrupt quirk which can be set on such platforms.\n\nWhen the interrupt is requested with IRQF_TRIGGER_RISING, IRQF_ONESHOT\ncannot be used, as we might miss interrupts that occur after the FW\nstatus is cleared and before the threaded interrupt handler exits.\n\nMoreover, when IRQF_ONESHOT is not set, iterating more than once in the\nthreaded interrupt handler introduces a few race conditions between this\nhandler and the hardirq handler. Currently this is worked around by\nlimiting the loop to one iteration only. This workaround has an impact\non performance. To remove to this restriction, the race conditions will\nneed to be addressed.\n\nSigned-off-by: Ido Yariv \u003cido@wizery.com\u003e\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\n" }, { "commit": "d29633b40e6afc6b4276a4e381bc532cc84be104", "tree": "136e6a871de72b504a8999b924c8c29958654382", "parents": [ "8bf69aae4cb9b196ba5ac386f83a1ca3865af11f" ], "author": { "name": "Ido Yariv", "email": "ido@wizery.com", "time": "Thu Mar 31 10:06:57 2011 +0200" }, "committer": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Tue Apr 19 16:49:17 2011 +0300" }, "message": "wl12xx: Clean up and fix the 128x boot sequence\n\nClean up the boot sequence code \u0026 fix the following issues:\n1. Always read the registers\u0027 values and set the relevant bits instead of\n zeroing all other bits\n2. Handle cases where wl1271_top_reg_read returns an error\n3. Verify that the HW can detect the selected clock source\n4. Remove 128x PG10 initialization code\n5. Configure the MCS PLL to work in HP mode\n\nSigned-off-by: Ido Yariv \u003cido@wizery.com\u003e\nReviewed-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\n" }, { "commit": "62c7d085e1f2a1f2b4d89560551eff18d703b3b1", "tree": "148246891c0c7f41e6cdb72623ad58e2ae0ed21c", "parents": [ "34a0a2025c8bddc6505b56a58ef2e7333a4e4165" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Thu Mar 10 16:42:47 2011 +0200" }, "committer": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Tue Apr 19 16:19:44 2011 +0300" }, "message": "wl12xx: add new board_tcxo_clock element to the platform data\n\nThis new value is a new type of clock setting that is used by wl128x\nchipsets.\n\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\n" }, { "commit": "e1943424e43974f85b82bb31eaf832823bf49ce7", "tree": "00a2dda7454ba186c0be4bfb8d08b7f74c3cd98c", "parents": [ "88230fd586b4ccc5ffe6d6c2df8cdc495e89ad83", "0553c891fabd287726b41076cfd03fe7e5ab596f" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Apr 19 00:21:33 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Apr 19 00:21:33 2011 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\tdrivers/net/bnx2x/bnx2x_ethtool.c\n" }, { "commit": "fce55922f5299a04c0a56b170a141fab34f13465", "tree": "91c6eeea0957b41199641c43add0e8170ad65f89", "parents": [ "21d8c49e01a0c1c6eb6c750cd04110db4a539284" ], "author": { "name": "Allan, Bruce W", "email": "bruce.w.allan@intel.com", "time": "Wed Apr 13 13:09:10 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 14 21:15:49 2011 -0700" }, "message": "ethtool: allow custom interval for physical identification\n\nWhen physical identification of an adapter is done by toggling the\nmechanism on and off through software utilizing the set_phys_id operation,\nit is done with a fixed duration for both on and off states. Some drivers\nmay want to set a custom duration for the on/off intervals. This patch\nchanges the API so the return code from the driver\u0027s entry point when it\nis called with ETHTOOL_ID_ACTIVE can specify the frequency at which to\ncycle the on/off states, and updates the drivers that have already been\nconverted to use the new set_phys_id and use the synchronous method for\nidentifying an adapter.\n\nThe physical identification frequency set in the updated drivers is based\non how it was done prior to the introduction of set_phys_id.\n\nCompile tested only. Also fixes a compiler warning in sfc.\n\nv2: drivers do not return -EINVAL for ETHOOL_ID_ACTIVE\nv3: fold patchset into single patch and cleanup per Ben\u0027s feedback\n\nSigned-off-by: Bruce Allan \u003cbruce.w.allan@intel.com\u003e\nCc: Ben Hutchings \u003cbhutchings@solarflare.com\u003e\nCc: Sathya Perla \u003csathya.perla@emulex.com\u003e\nCc: Subbu Seetharaman \u003csubbu.seetharaman@emulex.com\u003e\nCc: Ajit Khaparde \u003cajit.khaparde@emulex.com\u003e\nCc: Michael Chan \u003cmchan@broadcom.com\u003e\nCc: Eilon Greenstein \u003ceilong@broadcom.com\u003e\nCc: Divy Le Ray \u003cdivy@chelsio.com\u003e\nCc: Don Fry \u003cpcnet32@frontier.com\u003e\nCc: Jon Mason \u003cjdmason@kudzu.us\u003e\nCc: Solarflare linux maintainers \u003clinux-net-drivers@solarflare.com\u003e\nCc: Steve Hodgson \u003cshodgson@solarflare.com\u003e\nCc: Stephen Hemminger \u003cshemminger@linux-foundation.org\u003e\nCc: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nAcked-by: Jon Mason \u003cjdmason@kudzu.us\u003e\nAcked-by: Ben Hutchings \u003cbhutchings@solarflare.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "38a2f37258f9e2ae3f6e4241e01088be8dfaf4e9", "tree": "06cb5dc48a0f749e975c0fe6f4ffab5e15c74a07", "parents": [ "3e8c806a08c7beecd972e7ce15c570b9aba64baa" ], "author": { "name": "huajun li", "email": "huajun.li.lee@gmail.com", "time": "Wed Apr 13 15:43:32 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 14 00:22:27 2011 -0700" }, "message": "usbnet: Fix up \u0027FLAG_POINTTOPOINT\u0027 and \u0027FLAG_MULTI_PACKET\u0027 overlaps.\n\nUSB tethering does not work anymore since 2.6.39-rc2, but it\u0027s okay in\n-rc1. The root cause is the new added mask code \u0027FLAG_POINTTOPOINT\u0027\noverlaps \u0027FLAG_MULTI_PACKET\u0027 in include/linux/usb/usbnet.h, this\ncauses logic issue in rx_process(). This patch cleans up the overlap.\n\nReported-and-Tested-by: Gottfried Haider \u003cgottfried.haider@gmail.com\u003e\nSigned-off-by: Huajun Li \u003chuajun.li.lee@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c326de88b8ac7ed1cd1027017ba6079dbe91be49", "tree": "9458898250dc12048b46b7a54581211422a8c39e", "parents": [ "c3e945006ab2295e9a3f4327aa74a502ad123fe6" ], "author": { "name": "Mathieu J. Poirier", "email": "mathieu.poirier@linaro.org", "time": "Wed Apr 13 17:13:00 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 13 17:13:00 2011 -0700" }, "message": "net: allow shifted access in smsc911x V2\n\nThis is a revised patch that permits a shifted access to the\nLAN9221 registers. More specifically:\n\n It adds a shift parameter in the platform_data.\n It introduces an ops in smsc911x_data.\n A choice of access function to use at run-time.\n Four new shifted access function.\n\nSigned-off-by: Mathieu Poirier \u003cmathieu.poirier@linaro.org\u003e\nSigned-off-by: Alessandro Rubini \u003crubini@gnudd.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "4d42d417be75d750b82798922b6e775915e11bce", "tree": "306b97e4cb6e82d5ecd7109c0b2561d256be67a8", "parents": [ "74ae2fd7d326750d973920c30d5269596724ca71" ], "author": { "name": "Ben Hutchings", "email": "ben@decadent.org.uk", "time": "Wed Apr 13 14:48:55 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 13 14:48:55 2011 -0700" }, "message": "rndis_host: Poll status before control channel where necessary\n\nSome RNDIS devices don\u0027t respond on the control channel until polled\non the status channel. In particular, this was reported to be the\ncase for the 2Wire HomePortal 1000SW and for some Windows Mobile\ndevices.\n\nThis is roughly based on a patch by John Carr \u003cjohn.carr@unrouted.co.uk\u003e\nwhich is currently applied by Mandriva.\n\nReported-by: Mark Glassberg \u003cvzeeaxwl@myfairpoint.net\u003e\nSigned-off-by: Ben Hutchings \u003cben@decadent.org.uk\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "8b5933c380fc66a6311739f9b36a812383f82141", "tree": "0552732a62a704756069e34cb945ee191a733332", "parents": [ "6139e75f4a413bdc8f366fc11e437347be8abc59" ], "author": { "name": "amit salecha", "email": "amit.salecha@qlogic.com", "time": "Thu Apr 07 01:58:42 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 13 11:31:04 2011 -0700" }, "message": "net: ethtool support to configure number of channels\n\nEthtool support to configure RX, TX and other channels. combined field\nin struct ethtool_channels to reflect set of channel (RX, TX or other).\nOther channel can be link interrupts, SR-IOV coordination etc.\n\nETHTOOL_GCHANNELS will report max and current number of RX channels,\nmax and current number of TX channels, max and current number of other channel\nor max and current number of combined channel.\n\nNumber of channel can be modify upto max number of channel through\nETHTOOL_SCHANNELS command.\n\nBen Hutchings:\no define \u0027combined\u0027 and \u0027other\u0027 types. Most multiqueue drivers pair up RX and TX\n queues so that most channels combine RX and TX work.\no Please could you use a kernel-doc comment to describe the structure.\n\nSigned-off-by: Amit Kumar Salecha \u003camit.salecha@qlogic.com\u003e\nReviewed-by: Ben Hutchings \u003cbhutchings@solarflare.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "91eb7c08c6cb3b8eeba1c61f5753c56dcb77f018", "tree": "4e3c461633b58a6cea44bb0230ee750e4bd98416", "parents": [ "e3f6a652fd0e828de586a3a87b56c07f7a32259a" ], "author": { "name": "Jozsef Kadlecsik", "email": "kadlec@blackhole.kfki.hu", "time": "Wed Apr 13 13:51:38 2011 +0200" }, "committer": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Wed Apr 13 13:51:38 2011 +0200" }, "message": "netfilter: ipset: SCTP, UDPLITE support added\n\nSCTP and UDPLITE port support added to the hash:*port* set types.\n\nSigned-off-by: Jozsef Kadlecsik \u003ckadlec@blackhole.kfki.hu\u003e\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\n" }, { "commit": "6139e75f4a413bdc8f366fc11e437347be8abc59", "tree": "3cc9d95c92840717e2ecbd88c4d1ce35b339057c", "parents": [ "a7e70158884629898d79709622a66b8ef99e4018" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Apr 12 19:27:51 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Apr 12 19:27:51 2011 -0700" }, "message": "net: Missing \u0027inline\u0027 in vlan-disabled vlan_untag()\n\nReported-by: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "a7e70158884629898d79709622a66b8ef99e4018", "tree": "bd0cd03816f85f5bcef84000e01b0f9701f063ed", "parents": [ "24743537d3f784a8b3014e934fad0a9c45e4e789", "252f4bf400df1712408fe83ba199a66a1b57ab1d" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Apr 12 16:16:02 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Apr 12 16:16:02 2011 -0700" }, "message": "Merge branch \u0027for-davem\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n" }, { "commit": "1aac62671686e6234c91b5f6fc4caaa850419d5d", "tree": "f265c06caa7cf513a06b07726be29090210c0d29", "parents": [ "6d95ff974a4b51121777973ffba7547c648da974" ], "author": { "name": "Michał Mirosław", "email": "mirq-linux@rere.qmqm.pl", "time": "Tue Apr 12 04:07:39 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Apr 12 14:54:24 2011 -0700" }, "message": "net: vlan_features comment clarification\n\nSigned-off-by: Michał Mirosław \u003cmirq-linux@rere.qmqm.pl\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "bcc6d47903612c3861201cc3a866fb604f26b8b2", "tree": "bd02aeaa18984de46d09a1cb41b1f5e09ec89dbb", "parents": [ "143780c6562080c1117cd9197ee1b33c0d838376" ], "author": { "name": "Jiri Pirko", "email": "jpirko@redhat.com", "time": "Thu Apr 07 19:48:33 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Apr 12 14:15:19 2011 -0700" }, "message": "net: vlan: make non-hw-accel rx path similar to hw-accel\n\nNow there are 2 paths for rx vlan frames. When rx-vlan-hw-accel is\nenabled, skb is untagged by NIC, vlan_tci is set and the skb gets into\nvlan code in __netif_receive_skb - vlan_hwaccel_do_receive.\n\nFor non-rx-vlan-hw-accel however, tagged skb goes thru whole\n__netif_receive_skb, it\u0027s untagged in ptype_base hander and reinjected\n\nThis incosistency is fixed by this patch. Vlan untagging happens early in\n__netif_receive_skb so the rest of code (ptype_all handlers, rx_handlers)\nsee the skb like it was untagged by hw.\n\nSigned-off-by: Jiri Pirko \u003cjpirko@redhat.com\u003e\n\nv1-\u003ev2:\n\tremove \"inline\" from vlan_core.c functions\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "ebe27c91af8b7f4810ae906fbd3eeb2d87850026", "tree": "eff1fe0dbb8ecb4b116d8f96c6beb3eda1c52c7a", "parents": [ "f60c49b67dd6db2ccb740a6a671414f9dab00c4f" ], "author": { "name": "Mohammed Shafi Shajakhan", "email": "mshajakhan@atheros.com", "time": "Fri Apr 08 21:24:24 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:58:47 2011 -0400" }, "message": "{mac|nl}80211: Add station connected time\n\nAdd station connected time in debugfs. This will be helpful to get a\nmeasure of stability of the connection and for debugging stress issues\n\nCc: Senthilkumar Balasubramanian \u003cSenthilkumar.Balasubramanian@Atheros.com\u003e\nSigned-off-by: Mohammed Shafi Shajakhan \u003cmshajakhan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c93b5e717ec47b57abfe0229360bc11e77520984", "tree": "1e6f703c3c1b1c2e55b759b4e992ef04e81f973e", "parents": [ "96b78dff0321d881ef27d858a462c476e0444619" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Apr 07 15:08:34 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:57:39 2011 -0400" }, "message": "nl80211: New notification to discover mesh peer candidates.\n\nNotify userspace when a beacon/presp is received from a suitable mesh\npeer candidate for whom no sta information exists. Userspace can then\ndecide to create a sta info for the candidate. If userspace is not\nready to authenticate the peer right away, it can create the sta info\nwith the authenticated flag unset and set it later.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b39c48fac1fc915a5dcd024bf6e9aabc855ed591", "tree": "d8c5d6e987f388b8c8769d16a51a07dfcd9c3539", "parents": [ "5cff5e01e818029a5d2c3c31b7ae5e5e7ee70452" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Apr 07 15:08:30 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:57:38 2011 -0400" }, "message": "nl80211/mac80211: let userspace authenticate stations\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "15d5dda623139bbf6165030fc251bbd5798f4130", "tree": "3adb84ef7d65fd274008d950ad99434e1a3a28a7", "parents": [ "581a8b0feeed8877aab3a8ca4c972419790cd07f" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Apr 07 15:08:28 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:57:37 2011 -0400" }, "message": "cfg80211/nl80211: Add userspace authentication flag to mesh setup\n\nDuring mesh setup, use NL80211_MESH_SETUP_USERSPACE_AUTH flag to create\na secure mesh and route management frames to userspace.\n\nAlso, NL80211_CMD_GET_WIPHY now returns a flag NL80211_SUPPORT_MESH_AUTH\nif the wiphy\u0027s mesh implementation supports routing of mesh auth frames\nto userspace. This is useful for forward compatibility between old\nkernels and new userspace tools.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: Thomas Pedersen \u003cthomas@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "581a8b0feeed8877aab3a8ca4c972419790cd07f", "tree": "36ef0e86b367e0abeb0a50fbf59840f125efdbc7", "parents": [ "a22e93f5d819f11d2a2d6332e20ff5b462e5c208" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Apr 07 15:08:27 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:57:37 2011 -0400" }, "message": "nl80211: rename NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE\n\nTo NL80211_MESH_SETUP_IE. This reflects our ability to insert any ie\ninto a mesh beacon, not simply path selection ies.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "252f4bf400df1712408fe83ba199a66a1b57ab1d", "tree": "e07fa00abdd55b31e22567786c78635f32c6a66c", "parents": [ "6ba1037c3d871ab70e342631516dbf841c35b086", "b37e3b6d64358604960b35e8ecbb7aed22e0926e" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:18:44 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:18:44 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n\nConflicts:\n\tdrivers/net/wireless/ath/ar9170/main.c\n\tdrivers/net/wireless/ath/ar9170/phy.c\n\tdrivers/net/wireless/zd1211rw/zd_rf_rf2959.c\n" }, { "commit": "1c01a80cfec6f806246f31ff2680cd3639b30e67", "tree": "0b554aad2ec1da71ecf6339d4ba51617bfe1dc3c", "parents": [ "c44d79950b2daa1025e62eede73e4e4a274d1ef3", "4a9f65f6304a00f6473e83b19c1e83caa1e42530" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 11 13:44:25 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 11 13:44:25 2011 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\tdrivers/net/smsc911x.c\n" }, { "commit": "127fe533ae56d7f4e7b5011869870982eba25723", "tree": "05a0752df856b975524fb1dbb302c2c84253aab9", "parents": [ "5d9f11cf5038587cc53975deb8beaa1a876a7a7b" ], "author": { "name": "Alexander Duyck", "email": "alexander.h.duyck@intel.com", "time": "Fri Apr 08 18:01:59 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 11 13:20:49 2011 -0700" }, "message": "v3 ethtool: add ntuple flow specifier data to network flow classifier\n\nThis change is meant to add an ntuple data extensions to the rx network flow\nclassification specifiers. The idea is to allow ntuple to be displayed via\nthe network flow classification interface.\n\nThe first patch had some left over stuff from the original flow extension\nflags I had added. That bit is removed in this patch.\n\nThe second had some left over comments that stated we ignored bits in the\nmasks when we actually match them.\n\nThis work is based on input from Ben Hutchings.\n\nSigned-off-by: Alexander Duyck \u003calexander.h.duyck@intel.com\u003e\nReviewed-by: Ben Hutchings \u003cbhutchings@solarflare.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c44eaf41a5a423993932c9a9ad279ee132779b48", "tree": "3554fc0bfdcd97936417d6d001d00710d11e67e5", "parents": [ "4263a2f1dad8c8e7ce2352a0cbc882c2b0c044a9", "88edaa415966af965bb7eb7056d8b58145462c8e" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Apr 11 07:27:24 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Apr 11 07:27:24 2011 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits)\n net: Add support for SMSC LAN9530, LAN9730 and LAN89530\n mlx4_en: Restoring RX buffer pointer in case of failure\n mlx4: Sensing link type at device initialization\n ipv4: Fix \"Set rt-\u003ert_iif more sanely on output routes.\"\n MAINTAINERS: add entry for Xen network backend\n be2net: Fix suspend/resume operation\n be2net: Rename some struct members for clarity\n pppoe: drop PPPOX_ZOMBIEs in pppoe_flush_dev\n dsa/mv88e6131: add support for mv88e6085 switch\n ipv6: Enable RFS sk_rxhash tracking for ipv6 sockets (v2)\n be2net: Fix a potential crash during shutdown.\n bna: Fix for handling firmware heartbeat failure\n can: mcp251x: Allow pass IRQ flags through platform data.\n smsc911x: fix mac_lock acquision before calling smsc911x_mac_read\n iwlwifi: accept EEPROM version 0x423 for iwl6000\n rt2x00: fix cancelling uninitialized work\n rtlwifi: Fix some warnings/bugs\n p54usb: IDs for two new devices\n wl12xx: fix potential buffer overflow in testmode nvs push\n zd1211rw: reset rx idle timer from tasklet\n ...\n" }, { "commit": "c1e48efc701b79ee4367c9a1a4e8bbc7c3586e02", "tree": "91921f7c0884813c72993fcd2ecd37dc5e56d89d", "parents": [ "912d398d28b4359c2fb1f3763f1ce4f86de8350e", "1b86a58f9d7ce4fe2377687f378fbfb53bdc9b6c" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 07 14:05:23 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 07 14:05:23 2011 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\tdrivers/net/benet/be_main.c\n" }, { "commit": "b37e3b6d64358604960b35e8ecbb7aed22e0926e", "tree": "f9673afc2332c15a989d3b32f002363a92ea66e1", "parents": [ "a90c7a313a1c5b4fc99f987a2ae8f92ab0ae35c7", "bd39a274fb7b43374c797bafdb7f506598f36f77" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 16:45:40 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 16:45:40 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n\nConflicts:\n\tdrivers/net/wireless/rtlwifi/efuse.c\n\tdrivers/net/wireless/rtlwifi/rtl8192c/fw_common.c\n\tnet/bluetooth/mgmt.c\n" }, { "commit": "f4263c9857e6411ef2388868cc6c79a1602a654e", "tree": "2eec220076c4d56a2460e185076cda6646ef2f9f", "parents": [ "8447c163afeaa7e9f6f015088177b1c8511e0877" ], "author": { "name": "Paul Stewart", "email": "pstew@chromium.org", "time": "Thu Mar 31 09:25:41 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:34:12 2011 -0400" }, "message": "nl80211: Add BSS parameters to station\n\nThis allows user-space monitoring of BSS parameters for the associated\nstation. This is useful for debugging and verifying that the paramaters\nare as expected.\n\n[Exactly the same as before but bundled into a single message]\n\nSigned-off-by: Paul Stewart \u003cpstew@chromium.org\u003e\nCc: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "42933bac11e811f02200c944d8562a15f8ec4ff0", "tree": "fcdd9afe56eb0e746565ddd1f92f22d36678b843", "parents": [ "2b9accbee563f535046ff2cd382d0acaa92e130c", "25985edcedea6396277003854657b5f3cb31a628" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Apr 07 11:14:49 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Apr 07 11:14:49 2011 -0700" }, "message": "Merge branch \u0027for-linus2\u0027 of git://git.profusion.mobi/users/lucas/linux-2.6\n\n* \u0027for-linus2\u0027 of git://git.profusion.mobi/users/lucas/linux-2.6:\n Fix common misspellings\n" }, { "commit": "4c844d97d269a7ec4a6ba7d530aa876ac64dfb76", "tree": "67198ffbe0d8652f9a26548a7435f7514912a8cc", "parents": [ "66ee33bfda6237b009b6fb0e48690e31800ff334", "c5e129ac2fc72c119b85db79a629de66332f136d" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 06 12:27:34 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 06 12:27:34 2011 -0700" }, "message": "Merge branch \u0027for-davem\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next-2.6\n" }, { "commit": "34206f267120c839a479d0237db907fa062e7b0f", "tree": "9c0ba35cefe44b0913c6cbbc7165869d839abee7", "parents": [ "35a67edf3570e9b44c34965dd52a6b7f845fb40f" ], "author": { "name": "Enric Balletbo i Serra", "email": "eballetbo@iseebcn.com", "time": "Tue Apr 05 07:08:41 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 06 12:24:26 2011 -0700" }, "message": "can: mcp251x: Allow pass IRQ flags through platform data.\n\nWhen an interrupt occurs, the INT pin is driven low by the\nMCP251x controller (falling edge) but in some cases the INT\npin can be connected to the MPU through a transistor or level\ntranslator which inverts this signal. In this case interrupt\nshould be configured in rising edge.\n\nThis patch adds support to pass the IRQ flags via\nmcp251x_platform_data.\n\nSigned-off-by: Enric Balletbo i Serra \u003ceballetbo@iseebcn.com\u003e\nAcked-by: Wolfgang Grandegger \u003cwg@grandegger.com\u003e\nAcked-by: Marc Kleine-Budde \u003cmkl@pengutronix.de\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "44148a667d3715f3a1c37eeff7e954c946cc1efe", "tree": "fd8685dd17dcef45993b733f4ec4df97e6808304", "parents": [ "d0de4dc584ec6aa3b26fffea320a8457827768fc", "782b86e2656762382ae1c2686d8d5c91f7d5eacf" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Apr 05 15:29:01 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Apr 05 15:29:01 2011 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-2.6-block\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-2.6-block:\n ide: always ensure that blk_delay_queue() is called if we have pending IO\n block: fix request sorting at unplug\n dm: improve block integrity support\n fs: export empty_aops\n ide: ide_requeue_and_plug() reinstate \"always plug\" behaviour\n blk-throttle: don\u0027t call xchg on bool\n ufs: remove unessecary blk_flush_plug\n block: make the flush insertion use the tail of the dispatch list\n block: get rid of elv_insert() interface\n block: dump request state on seeing a corrupted request completion\n" }, { "commit": "a63a5cf84dac7a23a57c800eea5734701e7d3c04", "tree": "965552b96d7eacc21206a4f28672efd24a04d913", "parents": [ "7dcda1c96d7c643101d4a05579ef4512a4baa7ef" ], "author": { "name": "Mike Snitzer", "email": "snitzer@redhat.com", "time": "Fri Apr 01 21:02:31 2011 +0200" }, "committer": { "name": "Jens Axboe", "email": "jaxboe@fusionio.com", "time": "Tue Apr 05 23:52:43 2011 +0200" }, "message": "dm: improve block integrity support\n\nThe current block integrity (DIF/DIX) support in DM is verifying that\nall devices\u0027 integrity profiles match during DM device resume (which\nis past the point of no return). To some degree that is unavoidable\n(stacked DM devices force this late checking). But for most DM\ndevices (which aren\u0027t stacking on other DM devices) the ideal time to\nverify all integrity profiles match is during table load.\n\nIntroduce the notion of an \"initialized\" integrity profile: a profile\nthat was blk_integrity_register()\u0027d with a non-NULL \u0027blk_integrity\u0027\ntemplate. Add blk_integrity_is_initialized() to allow checking if a\nprofile was initialized.\n\nUpdate DM integrity support to:\n- check all devices with _initialized_ integrity profiles match\n during table load; uninitialized profiles (e.g. for underlying DM\n device(s) of a stacked DM device) are ignored.\n- disallow a table load that would result in an integrity profile that\n conflicts with a DM device\u0027s existing (in-use) integrity profile\n- avoid clearing an existing integrity profile\n- validate all integrity profiles match during resume; but if they\n don\u0027t all we can do is report the mismatch (during resume we\u0027re past\n the point of no return)\n\nSigned-off-by: Mike Snitzer \u003csnitzer@redhat.com\u003e\nCc: Martin K. Petersen \u003cmartin.petersen@oracle.com\u003e\nSigned-off-by: Jens Axboe \u003cjaxboe@fusionio.com\u003e\n" }, { "commit": "7dcda1c96d7c643101d4a05579ef4512a4baa7ef", "tree": "62051d63c47a3df7381cdc294815e79da5ebdc93", "parents": [ "929e27252e8ca69363f81f26af5eaba62cb4c572" ], "author": { "name": "Jens Axboe", "email": "jaxboe@fusionio.com", "time": "Tue Apr 05 23:51:48 2011 +0200" }, "committer": { "name": "Jens Axboe", "email": "jaxboe@fusionio.com", "time": "Tue Apr 05 23:51:48 2011 +0200" }, "message": "fs: export empty_aops\n\nWith the -\u003esync_page() hook gone, we have a few users that\nadd their own static address_space_operations without any\nfunctions defined.\n\nfs/inode.c already has an empty_aops that it uses for init\npurposes. Lets export that and use it in the places where\nan otherwise empty aops was defined.\n\nSigned-off-by: Jens Axboe \u003cjaxboe@fusionio.com\u003e\n" }, { "commit": "b710a480554f2be682bac3cb59b0e085ba3d644b", "tree": "bd1b9d5080bca2b35c861ddbc98d4116445bebfb", "parents": [ "8182924bc5850281985d73c312876746acd390b5" ], "author": { "name": "Jens Axboe", "email": "jaxboe@fusionio.com", "time": "Wed Mar 30 09:52:30 2011 +0200" }, "committer": { "name": "Jens Axboe", "email": "jaxboe@fusionio.com", "time": "Tue Apr 05 23:51:37 2011 +0200" }, "message": "block: get rid of elv_insert() interface\n\nMerge it with __elv_add_request(), it\u0027s pretty pointless to\nhave a function with only two callers. The main interface\nis elv_add_request()/__elv_add_request().\n\nSigned-off-by: Jens Axboe \u003cjaxboe@fusionio.com\u003e\n" }, { "commit": "d14f5b810b49c7dbd1a01be1c6d3641d46090080", "tree": "b201a1cf14c455b919ecb7d4a6631134d5815703", "parents": [ "b2a8b4b81966094703088a7bc76a313af841924d", "738faca34335cd1d5d87fa7c58703139c7fa15bd" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Apr 05 12:26:57 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Apr 05 12:26:57 2011 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits)\n ipv6: Don\u0027t pass invalid dst_entry pointer to dst_release().\n mlx4: fix kfree on error path in new_steering_entry()\n tcp: len check is unnecessarily devastating, change to WARN_ON\n sctp: malloc enough room for asconf-ack chunk\n sctp: fix auth_hmacs field\u0027s length of struct sctp_cookie\n net: Fix dev dev_ethtool_get_rx_csum() for forced NETIF_F_RXCSUM\n usbnet: use eth%d name for known ethernet devices\n starfire: clean up dma_addr_t size test\n iwlegacy: fix bugs in change_interface\n carl9170: Fix tx aggregation problems with some clients\n iwl3945: disable hw scan by default\n wireless: rt2x00: rt2800usb.c add and identify ids\n iwl3945: do not deprecate software scan\n mac80211: fix aggregation frame release during timeout\n cfg80211: fix BSS double-unlinking (continued)\n cfg80211:: fix possible NULL pointer dereference\n mac80211: fix possible NULL pointer dereference\n mac80211: fix NULL pointer dereference in ieee80211_key_alloc()\n ath9k: fix a chip wakeup related crash in ath9k_start\n mac80211: fix a crash in minstrel_ht in HT mode with no supported MCS rates\n ...\n" }, { "commit": "68f512f21a64c9b264df6c61a9333e7890faf74b", "tree": "4635193aaec903f09ae69df4dc880296d74c5135", "parents": [ "8717d07b1143e0f150921f5bd7cfe7af579a995a" ], "author": { "name": "Ben Hutchings", "email": "bhutchings@solarflare.com", "time": "Sat Apr 02 00:35:15 2011 +0100" }, "committer": { "name": "Ben Hutchings", "email": "bhutchings@solarflare.com", "time": "Tue Apr 05 15:12:01 2011 +0100" }, "message": "ethtool: Change ETHTOOL_PHYS_ID implementation to allow dropping RTNL\n\nThe ethtool ETHTOOL_PHYS_ID command runs for an arbitrarily long\nperiod of time, holding the RTNL lock. This blocks routing updates,\ndevice enumeration, and various important operations that one might\nwant to keep running while hunting for the flashing LED.\n\nWe need to drop the RTNL lock during this operation, but currently the\ncore implementation is a thin wrapper around a driver operation and\ndrivers may well depend upon holding the lock.\n\nDefine a new driver operation \u0027set_phys_id\u0027 with an argument that sets\nthe ID indicator on/off/inactive/active (the last optional, for any\ndriver or firmware that prefers to handle blinking asynchronously).\nWhen this is defined, the ethtool core drops the lock while waiting\nand only acquires it around calls to this operation.\n\nDeprecate the \u0027phys_id\u0027 operation in favour of this. It can be\nremoved once all in-tree drivers are converted.\n\nSigned-off-by: Ben Hutchings \u003cbhutchings@solarflare.com\u003e\n" }, { "commit": "8717d07b1143e0f150921f5bd7cfe7af579a995a", "tree": "a0b413c9438f186766bbb25e663a35b29e522a00", "parents": [ "e20b5b61a36bd5b80eea064c0f2e73285dbe0d3b" ], "author": { "name": "Ben Hutchings", "email": "bhutchings@solarflare.com", "time": "Fri Apr 01 23:57:41 2011 +0100" }, "committer": { "name": "Ben Hutchings", "email": "bhutchings@solarflare.com", "time": "Tue Apr 05 15:08:17 2011 +0100" }, "message": "ethtool: Fill out and update comment for struct ethtool_ops\n\nBriefly document all operations (except get_rx_ntuple), including\nwhether they may return an error code and whether they are deprecated.\nAlso mention some things that should be handled by the ethtool core\nrather than by drivers.\n\nBriefly document general requirements for callers.\n\nSigned-off-by: Ben Hutchings \u003cbhutchings@solarflare.com\u003e\n" }, { "commit": "e20b5b61a36bd5b80eea064c0f2e73285dbe0d3b", "tree": "8d4142e23b390d452c36e03469c12e57a036b616", "parents": [ "abfe903980161b11f3594e3dcbab8b5c5a67168b" ], "author": { "name": "Ben Hutchings", "email": "bhutchings@solarflare.com", "time": "Fri Apr 01 22:52:34 2011 +0100" }, "committer": { "name": "Ben Hutchings", "email": "bhutchings@solarflare.com", "time": "Tue Apr 05 15:01:41 2011 +0100" }, "message": "ethtool: Convert struct ethtool_ops comment to kernel-doc format\n\nSigned-off-by: Ben Hutchings \u003cbhutchings@solarflare.com\u003e\n" }, { "commit": "c6e1a0d12ca7b4f22c58e55a16beacfb7d3d8462", "tree": "6955c20538050329d0bdffdf24a787507ae6fdf1", "parents": [ "14f98f258f1936e0dba77474bd7eda63f61a9826" ], "author": { "name": "Tom Herbert", "email": "therbert@google.com", "time": "Mon Apr 04 22:30:30 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 04 22:30:30 2011 -0700" }, "message": "net: Allow no-cache copy from user on transmit\n\nThis patch uses __copy_from_user_nocache on transmit to bypass data\ncache for a performance improvement. skb_add_data_nocache and\nskb_copy_to_page_nocache can be called by sendmsg functions to use\nthis feature, initial support is in tcp_sendmsg. This functionality is\nconfigurable per device using ethtool.\n\nPresumably, this feature would only be useful when the driver does\nnot touch the data. The feature is turned on by default if a device\nindicates that it does some form of checksum offload; it is off by\ndefault for devices that do no checksum offload or indicate no checksum\nis necessary. For the former case copy-checksum is probably done\nanyway, in the latter case the device is likely loopback in which case\nthe no cache copy is probably not beneficial.\n\nThis patch was tested using 200 instances of netperf TCP_RR with\n1400 byte request and one byte reply. Platform is 16 core AMD x86.\n\nNo-cache copy disabled:\n 672703 tps, 97.13% utilization\n 50/90/99% latency:244.31 484.205 1028.41\n\nNo-cache copy enabled:\n 702113 tps, 96.16% utilization,\n 50/90/99% latency 238.56 467.56 956.955\n\nUsing 14000 byte request and response sizes demonstrate the\neffects more dramatically:\n\nNo-cache copy disabled:\n 79571 tps, 34.34 %utlization\n 50/90/95% latency 1584.46 2319.59 5001.76\n\nNo-cache copy enabled:\n 83856 tps, 34.81% utilization\n 50/90/95% latency 2508.42 2622.62 2735.88\n\nNote especially the effect on latency tail (95th percentile).\n\nThis seems to provide a nice performance improvement and is\nconsistent in the tests I ran. Presumably, this would provide\nthe greatest benfits in the presence of an application workload\nstressing the cache and a lot of transmit data happening.\n\nSigned-off-by: Tom Herbert \u003ctherbert@google.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "ce57d9e694d98e421e329fbac5d6f5dc5e9e101e", "tree": "f22695ac2aa83c5d90d583f222e219ddf1d0f912", "parents": [ "832fd35a545ecde11082d2dab74dd0aef8e0505e" ], "author": { "name": "Rafał Miłecki", "email": "zajec5@gmail.com", "time": "Fri Apr 01 12:06:48 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:06 2011 -0400" }, "message": "ssb: trivial: use u8 for chip_rev (it\u0027s mask is 0xF)\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4dd365fd55991b4e54a1d1c255081e6370b9da29", "tree": "609b4c04ad7bb6fa8168356511430419dcd380e9", "parents": [ "4f3f1ee9f373abfdc09bb3bed87969b7fe0fba06" ], "author": { "name": "Bing Zhao", "email": "bzhao@marvell.com", "time": "Wed Mar 30 18:01:15 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 04 16:20:05 2011 -0400" }, "message": "ieee80211: add HT extended capabilities masks\n\nIEEE Std 802.11n, Oct. 29, 2009:\n7.3.2.56.5 HT Extended Capabilities field\n\nSigned-off-by: Bing Zhao \u003cbzhao@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0545a3037773512d3448557ba048cebb73b3e4af", "tree": "fff0f5cf53ed953b002be1c4de0f3c2c7a88bd22", "parents": [ "fc3e5941248be00996150965a469d38c92913ac2" ], "author": { "name": "stephen hemminger", "email": "shemminger@vyatta.com", "time": "Mon Apr 04 05:30:58 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 04 11:10:24 2011 -0700" }, "message": "pkt_sched: QFQ - quick fair queue scheduler\n\nThis is an implementation of the Quick Fair Queue scheduler developed\nby Fabio Checconi. The same algorithm is already implemented in ipfw\nin FreeBSD. Fabio had an earlier version developed on Linux, I just\ncleaned it up. Thanks to Eric Dumazet for testing this under load.\n\nSigned-off-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nSigned-off-by: Eric Dumazet \u003ceric.dumazet@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "083dd8b8aacfcb62d65fb53ec744090879dd8150", "tree": "d48017ad6caa13f5a31c23186b16c36a84776c49", "parents": [ "95b8fbada76d978ce13a26785f8b85ff54478bb2", "a14b289d4614bb3b25d0455d68f72f3c7b4cc8e8" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 04 10:39:12 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 04 10:39:12 2011 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n" }, { "commit": "d7c764c4c7b782c660b4600b0bff2e3509892a4d", "tree": "94e7540f4996e15f717001eb08e21dd59c42c0fd", "parents": [ "148086bb64694cc91624bab2a550d50f800eb4b7", "818987e9a19c52240ba9b1c20f28f047eef76072" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Apr 04 08:37:45 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Apr 04 08:37:45 2011 -0700" }, "message": "Merge branch \u0027x86-fixes-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027x86-fixes-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n x86, UV: Fix kdump reboot\n x86, amd-nb: Rename CPU PCI id define for F4\n sound: Add delay.h to sound/soc/codecs/sn95031.c\n x86, mtrr, pat: Fix one cpu getting out of sync during resume\n x86, microcode: Unregister syscore_ops after microcode unloaded\n x86: Stop including \u003clinux/delay.h\u003e in two asm header files\n" }, { "commit": "4da7e90e653d67dfd405868246d316b04852e2d5", "tree": "735707a0b9f0c212776717ec8bc95735ff6a1d01", "parents": [ "fb9a7d76da108d120efb2258ea83b18dbbb2ecdd", "fd1edb3aa2c1d92618d8f0c6d15d44ea41fcac6a" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Apr 04 08:36:40 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Apr 04 08:36:40 2011 -0700" }, "message": "Merge branch \u0027perf-fixes-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027perf-fixes-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n perf: Fix task_struct reference leak\n perf: Fix task context scheduling\n perf: mmap 512 kiB by default\n perf: Rebase max unprivileged mlock threshold on top of page size\n perf tools: Fix NO_NEWT\u003d1 python build error\n perf symbols: Properly align symbol_conf.priv_size\n perf tools: Emit clearer message for sys_perf_event_open ENOENT return\n perf tools: Fixup exit path when not able to open events\n perf symbols: Fix vsyscall symbol lookup\n oprofile, x86: Allow setting EDGE/INV/CMASK for counter events\n" }, { "commit": "fb9a7d76da108d120efb2258ea83b18dbbb2ecdd", "tree": "f93f0eed000ed5d17cd728c7f8b05f489dde1e9a", "parents": [ "4acfaf829dacb8f8170b439d30065e8d2cfdaac9", "5679027e74126e0dfc860869b0e7ceab1dd06318" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Apr 04 08:36:15 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Apr 04 08:36:15 2011 -0700" }, "message": "Merge branch \u0027core-fixes-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027core-fixes-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n rcu: create new rcu_access_index() and use in mce\n WARN_ON_SMP(): Add comment to explain ({0;})\n" }, { "commit": "7f5c6d4f665bb57a19a34ce1fb16cc708c04f219", "tree": "e804faa506bbf9edcfd1fdadb2ab3749f58836cd", "parents": [ "8f7b01a178b8e6a7b663a1bbaa1710756d67b69b" ], "author": { "name": "Eric Dumazet", "email": "eric.dumazet@gmail.com", "time": "Mon Apr 04 17:04:03 2011 +0200" }, "committer": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Mon Apr 04 17:04:03 2011 +0200" }, "message": "netfilter: get rid of atomic ops in fast path\n\nWe currently use a percpu spinlock to \u0027protect\u0027 rule bytes/packets\ncounters, after various attempts to use RCU instead.\n\nLately we added a seqlock so that get_counters() can run without\nblocking BH or \u0027writers\u0027. But we really only need the seqcount in it.\n\nSpinlock itself is only locked by the current/owner cpu, so we can\nremove it completely.\n\nThis cleanups api, using correct \u0027writer\u0027 vs \u0027reader\u0027 semantic.\n\nAt replace time, the get_counters() call makes sure all cpus are done\nusing the old table.\n\nSigned-off-by: Eric Dumazet \u003ceric.dumazet@gmail.com\u003e\nCc: Jan Engelhardt \u003cjengelh@medozas.de\u003e\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\n" }, { "commit": "0fae2e7740aca7e384c5f337f458897e7e337d58", "tree": "ff0767f2dc382ee8a62e324e441b671382f0433c", "parents": [ "31ad3dd64e689bc79dd819f8f134b9b025240eb8" ], "author": { "name": "Florian Westphal", "email": "fw@strlen.de", "time": "Mon Apr 04 17:00:54 2011 +0200" }, "committer": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Mon Apr 04 17:00:54 2011 +0200" }, "message": "netfilter: af_info: add \u0027strict\u0027 parameter to limit lookup to .oif\n\nipv6 fib lookup can set RT6_LOOKUP_F_IFACE flag to restrict search\nto an interface, but this flag cannot be set via struct flowi.\n\nAlso, it cannot be set via ip6_route_output: this function uses the\npassed sock struct to determine if this flag is required\n(by testing for nonzero sk_bound_dev_if).\n\nWork around this by passing in an artificial struct sk in case\n\u0027strict\u0027 argument is true.\n\nThis is required to replace the rt6_lookup call in xt_addrtype.c with\nnf_afinfo-\u003eroute().\n\nSigned-off-by: Florian Westphal \u003cfw@strlen.de\u003e\nAcked-by: David S. Miller \u003cdavem@davemloft.net\u003e\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\n" }, { "commit": "31ad3dd64e689bc79dd819f8f134b9b025240eb8", "tree": "06d2a9afbea2b1b7973e416f18d4588df30fb91a", "parents": [ "a09d19779f3ffac6e16821accc2c1cc4df1b643a" ], "author": { "name": "Florian Westphal", "email": "fw@strlen.de", "time": "Mon Apr 04 16:56:29 2011 +0200" }, "committer": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Mon Apr 04 16:56:29 2011 +0200" }, "message": "netfilter: af_info: add network namespace parameter to route hook\n\nThis is required to eventually replace the rt6_lookup call in\nxt_addrtype.c with nf_afinfo-\u003eroute().\n\nSigned-off-by: Florian Westphal \u003cfw@strlen.de\u003e\nAcked-by: David S. Miller \u003cdavem@davemloft.net\u003e\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\n" }, { "commit": "2f9f28b212a2bd4948c8ceaaec33ce0123632129", "tree": "8c9961f59a190ab05a568216d69f4809ab3041e2", "parents": [ "512d06b5b64fb422d90f199b1be188082729edf9" ], "author": { "name": "Jozsef Kadlecsik", "email": "kadlec@blackhole.kfki.hu", "time": "Mon Apr 04 15:19:25 2011 +0200" }, "committer": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Mon Apr 04 15:19:25 2011 +0200" }, "message": "netfilter: ipset: references are protected by rwlock instead of mutex\n\nThe timeout variant of the list:set type must reference the member sets.\nHowever, its garbage collector runs at timer interrupt so the mutex\nprotection of the references is a no go. Therefore the reference protection\nis converted to rwlock.\n\nSigned-off-by: Jozsef Kadlecsik \u003ckadlec@blackhole.kfki.hu\u003e\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\n" }, { "commit": "6cb6a27c45cec9184302c2e350b3593c64bc7f6c", "tree": "1338b3838588ce4c28b71c4e611db51eea53e89b", "parents": [ "e9403c8437cf3721e7901c1a8fcb06bb642a7e55" ], "author": { "name": "Michał Mirosław", "email": "mirq-linux@rere.qmqm.pl", "time": "Sat Apr 02 22:48:47 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Apr 02 22:48:47 2011 -0700" }, "message": "net: Call netdev_features_change() from netdev_update_features()\n\nIssue FEAT_CHANGE notification when features are changed by\nnetdev_update_features(). This will allow changes made by extra constraints\non e.g. MTU change to be properly propagated like changes via ethtool.\n\nSigned-off-by: Michał Mirosław \u003cmirq-linux@rere.qmqm.pl\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "4dd5ffe4fc36128dc86568ddeaeae359e6037762", "tree": "a1d36b66e8125ce9778ab96fedce028c78654c21", "parents": [ "c261344d3ce3edac781f9d3c7eabe2e96d8e8fe8" ], "author": { "name": "Michał Mirosław", "email": "mirq-linux@rere.qmqm.pl", "time": "Wed Mar 30 23:58:08 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Apr 01 20:23:25 2011 -0700" }, "message": "net: Fix dev dev_ethtool_get_rx_csum() for forced NETIF_F_RXCSUM\n\ndev_ethtool_get_rx_csum() won\u0027t report rx checksumming when it\u0027s not\nchangeable and driver is converted to hw_features and friends. Fix this.\n\n(dev-\u003ehw_features \u0026 NETIF_F_RXCSUM) check is dropped - if the\nethtool_ops-\u003eget_rx_csum is set, then driver is not coverted, yet.\n\nSigned-off-by: Michał Mirosław \u003cmirq-linux@rere.qmqm.pl\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c261344d3ce3edac781f9d3c7eabe2e96d8e8fe8", "tree": "a0f71fa65dc9b6536a5e03e7621889d6ecf48f79", "parents": [ "1591cb60838603c8cc2c540192c8244962436539" ], "author": { "name": "Arnd Bergmann", "email": "arnd.bergmann@linaro.org", "time": "Fri Apr 01 20:12:02 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Apr 01 20:12:02 2011 -0700" }, "message": "usbnet: use eth%d name for known ethernet devices\n\nThe documentation for the USB ethernet devices suggests that\nonly some devices are supposed to use usb0 as the network interface\nname instead of eth0. The logic used there, and documented in\nKconfig for CDC is that eth0 will be used when the mac address\nis a globally assigned one, but usb0 is used for the locally\nmanaged range that is typically used on point-to-point links.\n\nUnfortunately, this has caused a lot of pain on the smsc95xx\ndevice that is used on the popular pandaboard without an\nEEPROM to store the MAC address, which causes the driver to\ncall random_ether_address().\n\nObviously, there should be a proper MAC addressed assigned to\nthe device, and discussions are ongoing about how to solve\nthis, but this patch at least makes sure that the default\ninterface naming gets a little saner and matches what the\nuser can expect based on the documentation, including for\nnew devices.\n\nThe approach taken here is to flag whether a device might be a\npoint-to-point link with the new FLAG_POINTTOPOINT setting in\nthe usbnet driver_info. A driver can set both FLAG_POINTTOPOINT\nand FLAG_ETHER if it is not sure (e.g. cdc_ether), or just one\nof the two. The usbnet framework only looks at the MAC address\nfor device naming if both flags are set, otherwise it trusts the\nflag.\n\nSigned-off-by: Arnd Bergmann \u003carnd.bergmann@linaro.org\u003e\nTested-by: Andy Green \u003candy.green@linaro.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "ccd00d1091fa7fff151127f26f6900be2ac8cc10", "tree": "2fdd334f5cef98018557d94a69d9432e4f8005e2", "parents": [ "afdef69c7ff7d0bf59e3cafc187aefb12878dbe3", "c0bb9e45f3a7f67fc358946727bc3d5f23d0f55d" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Apr 01 08:57:02 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Apr 01 08:57:02 2011 -0700" }, "message": "Merge branch \u0027merge\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc\n\n* \u0027merge\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:\n kdump: Allow shrinking of kdump region to be overridden\n powerpc/pmac/smp: Remove no-longer needed preempt workaround\n powerpc/smp: Increase vdso_data-\u003eprocessorCount, not just decrease it\n powerpc/smp: Create idle threads on demand and properly reset them\n powerpc/smp: Don\u0027t expose per-cpu \"cpu_state\" array\n powerpc/pmac/smp: Fix CPU hotplug crashes on some machines\n powerpc/smp: Add a smp_ops-\u003ebringup_up() done callback\n powerpc/pmac: Rename cpu_state in therm_pm72 to avoid collision\n powerpc/pmac/smp: Properly NAP offlined CPU on G5\n powerpc/pmac/smp: Remove HMT changes for PowerMac offline code\n powerpc/pmac/smp: Consolidate 32-bit and 64-bit PowerMac cpu_die in one file\n powerpc/pmac/smp: Fixup smp_core99_cpu_disable() and use it on 64-bit\n powerpc/pmac/smp: Rename fixup_irqs() to migrate_irqs() and use it on ppc32\n powerpc/pmac/smp: Fix 32-bit PowerMac cpu_die\n powerpc/smp: Remove unused smp_ops-\u003ecpu_enable()\n powerpc/smp: Remove unused generic_cpu_enable()\n powerpc/smp: Fix generic_mach_cpu_die()\n powerpc/smp: soft-replugged CPUs must go back to start_secondary\n powerpc: Make decrementer interrupt robust against offlined CPUs\n" }, { "commit": "84daeb09ef2b11cb0b29e100766e38e206c8bc47", "tree": "c89748e1bb8618aac7ad0d2079fba43543844483", "parents": [ "ecb78ab6f30106ab72a575a25b1cdfd1633b7ca2", "c100c8f4c3c6f2a407bdbaaad2c4f1062e6a473a" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Apr 01 08:53:50 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Apr 01 08:53:50 2011 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:\n appletalk: Fix OOPS in atalk_release().\n mlx4: Fixing bad size of event queue buffer\n mlx4: Fixing use after free\n bonding:typo in comment\n sctp: Pass __GFP_NOWARN to hash table allocation attempts.\n connector: convert to synchronous netlink message processing\n fib: add rtnl locking in ip_fib_net_exit\n atm/solos-pci: Don\u0027t flap VCs when carrier state changes\n atm/solos-pci: Don\u0027t include frame pseudo-header on transmit hex-dump\n atm/solos-pci: Use VPI.VCI notation uniformly.\n Atheros, atl2: Fix mem leaks in error paths of atl2_set_eeprom\n netdev: fix mtu check when TSO is enabled\n net/usb: Ethernet quirks for the LG-VL600 4G modem\n phylib: phy_attach_direct: phy_init_hw can fail, add cleanup\n bridge: mcast snooping, fix length check of snooped MLDv1/2\n via-ircc: Pass PCI device pointer to dma_{alloc, free}_coherent()\n via-ircc: Use pci_{get, set}_drvdata() instead of static pointer variable\n net: gre: provide multicast mappings for ipv4 and ipv6\n bridge: Fix compilation warning in function br_stp_recalculate_bridge_id()\n net: Fix warnings caused by MAX_SKB_FRAGS change.\n" }, { "commit": "a4dd99250dc49031e6a92a895dbcc230a4832083", "tree": "3d0b6f45620f66044400ea14a6af019bf0af67e7", "parents": [ "0ce790e7d736cedc563e1fb4e998babf5a4dbc3d" ], "author": { "name": "Paul E. McKenney", "email": "paulmck@linux.vnet.ibm.com", "time": "Fri Apr 01 07:15:14 2011 -0700" }, "committer": { "name": "Paul E. McKenney", "email": "paulmck@linux.vnet.ibm.com", "time": "Fri Apr 01 07:27:31 2011 -0700" }, "message": "rcu: create new rcu_access_index() and use in mce\n\nThe MCE subsystem needs to sample an RCU-protected index outside of\nany protection for that index. If this was a pointer, we would use\nrcu_access_pointer(), but there is no corresponding rcu_access_index().\nThis commit therefore creates an rcu_access_index() and applies it\nto MCE.\n\nSigned-off-by: Paul E. McKenney \u003cpaulmck@linux.vnet.ibm.com\u003e\nTested-by: Zdenek Kabelac \u003czkabelac@redhat.com\u003e\n" }, { "commit": "c0bb9e45f3a7f67fc358946727bc3d5f23d0f55d", "tree": "55b320cd26722eb6e201110b4aceddfa15983722", "parents": [ "76d479a7caff58b1e5f31d80805f7f65f9177696" ], "author": { "name": "Anton Blanchard", "email": "anton@samba.org", "time": "Wed Aug 25 10:22:58 2010 +1000" }, "committer": { "name": "Benjamin Herrenschmidt", "email": "benh@kernel.crashing.org", "time": "Fri Apr 01 16:14:30 2011 +1100" }, "message": "kdump: Allow shrinking of kdump region to be overridden\n\nOn ppc64 the crashkernel region almost always overlaps an area of firmware.\nThis works fine except when using the sysfs interface to reduce the kdump\nregion. If we free the firmware area we are guaranteed to crash.\n\nRename free_reserved_phys_range to crash_free_reserved_phys_range and make\nit a weak function so we can override it.\n\nSigned-off-by: Anton Blanchard \u003canton@samba.org\u003e\nSigned-off-by: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\n" }, { "commit": "25985edcedea6396277003854657b5f3cb31a628", "tree": "f026e810210a2ee7290caeb737c23cb6472b7c38", "parents": [ "6aba74f2791287ec407e0f92487a725a25908067" ], "author": { "name": "Lucas De Marchi", "email": "lucas.demarchi@profusion.mobi", "time": "Wed Mar 30 22:57:33 2011 -0300" }, "committer": { "name": "Lucas De Marchi", "email": "lucas.demarchi@profusion.mobi", "time": "Thu Mar 31 11:26:23 2011 -0300" }, "message": "Fix common misspellings\n\nFixes generated by \u0027codespell\u0027 and manually reviewed.\n\nSigned-off-by: Lucas De Marchi \u003clucas.demarchi@profusion.mobi\u003e\n" }, { "commit": "ab711fe08297de1485fff0a366e6db8828cafd6a", "tree": "e8a823c44d8b6bf132556f9d8aa09ec4a506c299", "parents": [ "800cd25c12981c99e5401c3551ffffd99f1c6c85" ], "author": { "name": "Peter Zijlstra", "email": "a.p.zijlstra@chello.nl", "time": "Thu Mar 31 10:29:26 2011 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Mar 31 13:02:55 2011 +0200" }, "message": "perf: Fix task context scheduling\n\nJiri reported:\n\n |\n | - once an event is created by sys_perf_event_open, task context\n | is created and it stays even if the event is closed, until the\n | task is finished ... thats what I see in code and I assume it\u0027s\n | correct\n |\n | - when the task opens event, perf_sched_events jump label is\n | incremented and following callbacks are started from scheduler\n |\n | __perf_event_task_sched_in\n | __perf_event_task_sched_out\n |\n | These callback *in/out set/unset cpuctx-\u003etask_ctx value to the\n | task context.\n |\n | - close is called on event on CPU 0:\n | - the task is scheduled on CPU 0\n | - __perf_event_task_sched_in is called\n | - cpuctx-\u003etask_ctx is set\n | - perf_sched_events jump label is decremented and \u003d\u003d 0\n | - __perf_event_task_sched_out is not called\n | - cpuctx-\u003etask_ctx on CPU 0 stays set\n |\n | - exit is called on CPU 1:\n | - the task is scheduled on CPU 1\n | - perf_event_exit_task is called\n | - task_ctx_sched_out unsets cpuctx-\u003etask_ctx on CPU 1\n | - put_ctx destroys the context\n |\n | - another call of perf_rotate_context on CPU 0 will use invalid\n | task_ctx pointer, and eventualy panic.\n |\n\nCure this the simplest possibly way by partially reverting the\njump_label optimization for the sched_out case.\n\nReported-and-tested-by: Jiri Olsa \u003cjolsa@redhat.com\u003e\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nCc: Oleg Nesterov \u003coleg@redhat.com\u003e\nCc: \u003cstable@kernel.org\u003e # .37+\nLKML-Reference: \u003c1301520405.4859.213.camel@twins\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "cb6c8520f6f6bba7b7e1a6de3360a8edfd8243b6", "tree": "afd01bf7422f33d7e112942229191ed758273398", "parents": [ "438008af63f8fb3a061c31d331e150fba6eaa103" ], "author": { "name": "Borislav Petkov", "email": "bp@amd64.org", "time": "Wed Mar 30 20:34:47 2011 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Mar 31 08:51:38 2011 +0200" }, "message": "x86, amd-nb: Rename CPU PCI id define for F4\n\nWith increasing number of PCI function ids, add the PCI function\nid in the define name instead of its symbolic name in the BKDG\nfor more clarity. This renames function 4 define.\n\nSigned-off-by: Borislav Petkov \u003cborislav.petkov@amd.com\u003e\nCc: Jesse Barnes \u003cjbarnes@virtuousgeek.org\u003e\nLKML-Reference: \u003c20110330183447.GA3668@aftab\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "4e700bcdd89a5592a5a991bf3e78904de1140611", "tree": "1a21ea2eb4c0ebe1a9d5303c6cc8328474f7f5e1", "parents": [ "6aba74f2791287ec407e0f92487a725a25908067", "a84b50ceb7d640437d0dc28a2bef0d0de054de89" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Mar 30 21:37:29 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Mar 30 21:37:29 2011 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n" }, { "commit": "04f482faf50535229a5a5c8d629cf963899f857c", "tree": "698d5c8e22e68f9a621c03972556e3a73c525465", "parents": [ "e2666f84958adb3a034b98e99699b55705117e01" ], "author": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Mon Mar 28 08:39:36 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Mar 30 17:14:33 2011 -0700" }, "message": "connector: convert to synchronous netlink message processing\n\nCommits 01a16b21 (netlink: kill eff_cap from struct netlink_skb_parms)\nand c53fa1ed (netlink: kill loginuid/sessionid/sid members from struct\nnetlink_skb_parms) removed some members from struct netlink_skb_parms\nthat depend on the current context, all netlink users are now required\nto do synchronous message processing.\n\nconnector however queues received messages and processes them in a work\nqueue, which is not valid anymore. This patch converts connector to do\nsynchronous message processing by invoking the registered callback handler\ndirectly from the netlink receive function.\n\nIn order to avoid invoking the callback with connector locks held, a\nreference count is added to struct cn_callback_entry, the reference\nis taken when finding a matching callback entry on the device\u0027s queue_list\nand released after the callback handler has been invoked.\n\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\nAcked-by: Evgeniy Polyakov \u003czbr@ioremap.net\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c031235b395433350f25943b7580a5e343c7b7b2", "tree": "2b00c05104439e9a8bbf6d521b649f2138945b80", "parents": [ "18b429e74eeafe42e947b1b0f9a760c7153a0b5c" ], "author": { "name": "Philip A. Prindeville", "email": "philipp@redfish-solutions.com", "time": "Wed Mar 30 13:17:04 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Mar 30 16:53:38 2011 -0700" }, "message": "atm/solos-pci: Don\u0027t flap VCs when carrier state changes\n\nDon\u0027t flap VCs when carrier state changes; higher-level protocols\ncan detect loss of connectivity and act accordingly. This is more\nconsistent with how other network interfaces work.\n\nWe no longer use release_vccs() so we can delete it.\n\nrelease_vccs() was duplicated from net/atm/common.c; make the\ncorresponding function exported, since other code duplicates it\nand could leverage it if it were public.\n\nSigned-off-by: Philip A. Prindeville \u003cphilipp@redfish-solutions.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "6de66dd963ddd669667a81a2401f2fd6472ff55c", "tree": "4ab0cca2a88c388f93c3bfe6af6f022a894af0c5", "parents": [ "6fb1b1e18fe3d141c54182c5d5b3af823bed455f" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Sat Mar 19 13:55:40 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:15 2011 -0400" }, "message": "ath9k: add support for overriding LED pin and GPIO settings from platform data\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6fb1b1e18fe3d141c54182c5d5b3af823bed455f", "tree": "78d4b143bd0ef2368b3e4456f69a78bbe427b259", "parents": [ "691680b8335fa8995b190676f53e3bcef6477b4a" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Sat Mar 19 13:55:39 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 30 14:15:15 2011 -0400" }, "message": "ath9k: add support for overriding the MAC address through platform data\n\nOn some devices the correct MAC address is not in the EEPROM data, but\nstored somewhere else.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "50f3515828024582402044bcced6804c070c491c", "tree": "f9cf25bee56d0ca54acf4d571536268774dc56ed", "parents": [ "6aba74f2791287ec407e0f92487a725a25908067", "4b2a58abd1e17c0ee53c8dded879e015917cca67" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Mar 30 09:46:09 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Mar 30 09:46:09 2011 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:\n libceph: Create a new key type \"ceph\".\n libceph: Get secret from the kernel keys api when mounting with key\u003dNAME.\n ceph: Move secret key parsing earlier.\n libceph: fix null dereference when unregistering linger requests\n ceph: unlock on error in ceph_osdc_start_request()\n ceph: fix possible NULL pointer dereference\n ceph: flush msgr_wq during mds_client shutdown\n" }, { "commit": "7a635ea989991d7f12d57a12f2ba7cb6d211e083", "tree": "63ae2f1dc375fb239237b90f23af93b8a8245132", "parents": [ "d005a09edf8b12dd1bec651b2cf94caa0e7bb1be" ], "author": { "name": "Andrzej Zaborowski", "email": "andrew.zaborowski@intel.com", "time": "Mon Mar 28 12:56:33 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Mar 30 02:35:08 2011 -0700" }, "message": "net/usb: Ethernet quirks for the LG-VL600 4G modem\n\nThis adds a driver for the CDC Ethernet part of this modem. The\ndevice\u0027s ID is blacklisted in cdc_ether.c and is white-listed in\nthis new driver because of the quirks needed to make it useful.\nThe modem\u0027s firmware exposes a CDC ACM port for modem control and a\nCDC Ethernet port for network data. The descriptors look fine but\nboth ports actually are some sort of multiplexers requiring non-\nstandard headers added/removed from every packet or they get\nignored. All information is based on a usb traffic log from a\nWindows machine.\n\nOn the Verizon 4G network I\u0027ve seen speeds up to 1.1MB/s so far with\nthis driver, a speed-o-meter site reports 16.2Mbps/10.5Mbps.\nUserspace scripts are required to talk to the CDC ACM port.\n\nSigned-off-by: Andrzej Zaborowski \u003cbalrogg@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "eec009548e98f6b6d514ff5bb8a8627b8dd17a49", "tree": "bdce6d53b5a664234bea786aea9c0767377b04bd", "parents": [ "0ce790e7d736cedc563e1fb4e998babf5a4dbc3d" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Mar 29 23:34:08 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Mar 29 23:34:08 2011 -0700" }, "message": "net: Fix warnings caused by MAX_SKB_FRAGS change.\n\nAfter commit a715dea3c8e9ef2771c534e05ee1d36f65987e64 (\"net: Always\nallocate at least 16 skb frags regardless of page size\"), the value\nof MAX_SKB_FRAGS can now take on either an \"unsigned long\" or an\n\"int\" value.\n\nThis causes warnings like:\n\nnet/packet/af_packet.c: In function ‘tpacket_fill_skb’:\nnet/packet/af_packet.c:948: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 2 has type ‘int’\n\nFix by forcing the constant to be unsigned long, otherwise we have\na situation where the type of a system wide constant is variable.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "28959f268f910b2cd1c25e838b63c342062e28f2", "tree": "d1771510d76f7f6b5bae15a2e9dacc0bd6517600", "parents": [ "380a26be7d5af83f3831c3b6697031dffbb1c8f3" ], "author": { "name": "Thomas Gleixner", "email": "tglx@linutronix.de", "time": "Wed Mar 30 00:37:41 2011 +0200" }, "committer": { "name": "Thomas Gleixner", "email": "tglx@linutronix.de", "time": "Wed Mar 30 00:37:41 2011 +0200" }, "message": "genirq: Remove obsolete comment\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\n" }, { "commit": "380a26be7d5af83f3831c3b6697031dffbb1c8f3", "tree": "e228895a5546b568a8349a97a20f2a606f855175", "parents": [ "286b9bfe8ef6d97213c86bbaf30c250fd1f67568" ], "author": { "name": "Thomas Gleixner", "email": "tglx@linutronix.de", "time": "Wed Mar 30 00:35:34 2011 +0200" }, "committer": { "name": "Thomas Gleixner", "email": "tglx@linutronix.de", "time": "Wed Mar 30 00:35:34 2011 +0200" }, "message": "genirq: Remove now obsolete set_irq_wake()\n\nMissed that one in the big compat remval patch\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\n" }, { "commit": "8323c3aa74cd92465350294567142d12ffdcc963", "tree": "052e7374393994eea8d534f98ee1bc7acea4c2d9", "parents": [ "fbdb9190482fd83a3eb20cdeb0da454759f479d7" ], "author": { "name": "Tommi Virtanen", "email": "tommi.virtanen@dreamhost.com", "time": "Fri Mar 25 16:32:57 2011 -0700" }, "committer": { "name": "Sage Weil", "email": "sage@newdream.net", "time": "Tue Mar 29 12:11:16 2011 -0700" }, "message": "ceph: Move secret key parsing earlier.\n\nThis makes the base64 logic be contained in mount option parsing,\nand prepares us for replacing the homebew key management with the\nkernel key retention service.\n\nSigned-off-by: Tommi Virtanen \u003ctommi.virtanen@dreamhost.com\u003e\nSigned-off-by: Sage Weil \u003csage@newdream.net\u003e\n" }, { "commit": "6b2a4f7a5b777ea8fcf3bb38a0a33e68a920a9dc", "tree": "fcf7d9bddc31974ad046aecd51cc856c68e14cdd", "parents": [ "eefbab599531240adaffa1d23900afbc8b0342bd", "022b483596fabb5d1320aa4b76f43a754063f37e" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 29 12:09:30 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 29 12:09:30 2011 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (26 commits)\n mmc: SDHI should depend on SUPERH || ARCH_SHMOBILE\n mmc: tmio_mmc: Move some defines into a shared header\n mmc: tmio: support aggressive clock gating\n mmc: tmio: fix power-mode interpretation\n mmc: tmio: remove work-around for unmasked SDIO interrupts\n sh: fix SDHI IO address-range\n ARM: mach-shmobile: fix SDHI IO address-range\n mmc: tmio: only access registers above 0xff, if available\n mfd: remove now redundant sh_mobile_sdhi.h header\n sh: convert boards to use linux/mmc/sh_mobile_sdhi.h\n ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.h\n mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver\n sh: ecovec: use the CONFIG_MMC_TMIO symbols instead of MFD\n mmc: tmio: split core functionality, DMA and MFD glue\n mmc: tmio: use PIO for short transfers\n mmc: tmio-mmc: Improve DMA stability on sh-mobile\n mmc: fix mmc_app_send_scr() for dma transfer\n mmc: sdhci-esdhc: enable esdhc on imx53\n mmc: sdhci-esdhc: use writel/readl as general APIs\n mmc: sdhci: add the abort CMDTYPE bits definition\n ...\n" }, { "commit": "eefbab599531240adaffa1d23900afbc8b0342bd", "tree": "2beb38a94aca40c7e5a0396503968d041e584bf9", "parents": [ "90f1e7481eebfd47e7dbf7c8c0cbfe31e025e031", "3062aa50a6b2c3103470178fe7506c450d79ebe5" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 29 11:43:30 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 29 11:43:30 2011 -0700" }, "message": "Merge branch \u0027frv\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv\n\n* \u0027frv\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv:\n FRV: Use generic show_interrupts()\n FRV: Convert genirq namespace\n frv: Select GENERIC_HARDIRQS_NO_DEPRECATED\n frv: Convert cpu irq_chip to new functions\n frv: Convert mb93493 irq_chip to new functions\n frv: Convert mb93093 irq_chip to new function\n frv: Convert mb93091 irq_chip to new functions\n frv: Fix typo from __do_IRQ overhaul\n frv: Remove stale irq_chip.end\n FRV: Do some cleanups\n FRV: Missing node arg in alloc_thread_info_node() macro\n NOMMU: implement access_remote_vm\n NOMMU: support SMP dynamic percpu_alloc\n NOMMU: percpu should use is_vmalloc_addr().\n" }, { "commit": "c86defc82c18b648193b5c6aabcc6204fd6bb373", "tree": "1ef70cfa56f5f9a123d0db6fefe4c434c12bd6c6", "parents": [ "1309d7afbed112f0e8e90be9af975550caa0076b", "9ad198cba2a8177eea6a7f2f0202b910abdef96b" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 29 10:46:15 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 29 10:46:15 2011 -0700" }, "message": "Merge branch \u0027irq-final-for-linus-v2\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027irq-final-for-linus-v2\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (111 commits)\n gpio: ab8500: Mark broken\n genirq: Remove move_*irq leftovers\n genirq: Remove compat code\n drivers: Final irq namespace conversion\n mn10300: Use generic show_interrupts()\n mn10300: Cleanup irq_desc access\n mn10300: Convert genirq namespace\n frv: Use generic show_interrupts()\n frv: Convert genirq namespace\n frv: Select GENERIC_HARDIRQS_NO_DEPRECATED\n frv: Convert cpu irq_chip to new functions\n frv: Convert mb93493 irq_chip to new functions\n frv: Convert mb93093 irq_chip to new function\n frv: Convert mb93091 irq_chip to new functions\n frv: Fix typo from __do_IRQ overhaul\n frv: Remove stale irq_chip.end\n m68k: Convert irq function namespace\n xen: Use new irq_move functions\n xen: Cleanup genirq namespace\n unicore32: Use generic show_interrupts()\n ...\n" }, { "commit": "cb1817b37313b4b6c7f8f93c730553dd3cb6ac57", "tree": "30c9b246c77ad338f177a5a32a45eb92e5994652", "parents": [ "89078d572eb9ce8d4c04264b8b0ba86de0d74c8f", "02aadf72fe2c83f145e3437734e66be53abae481" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 29 07:41:33 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 29 07:41:33 2011 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits)\n xfrm: Restrict extended sequence numbers to esp\n xfrm: Check for esn buffer len in xfrm_new_ae\n xfrm: Assign esn pointers when cloning a state\n xfrm: Move the test on replay window size into the replay check functions\n netdev: bfin_mac: document TE setting in RMII modes\n drivers net: Fix declaration ordering in inline functions.\n cxgb3: Apply interrupt coalescing settings to all queues\n net: Always allocate at least 16 skb frags regardless of page size\n ipv4: Don\u0027t ip_rt_put() an error pointer in RAW sockets.\n net: fix ethtool-\u003eset_flags not intended -EINVAL return value\n mlx4_en: Fix loss of promiscuity\n tg3: Fix inline keyword usage\n tg3: use \u003clinux/io.h\u003e and \u003clinux/uaccess.h\u003e instead \u003casm/io.h\u003e and \u003casm/uaccess.h\u003e\n net: use CHECKSUM_NONE instead of magic number\n Net / jme: Do not use legacy PCI power management\n myri10ge: small rx_done refactoring\n bridge: notify applications if address of bridge device changes\n ipv4: Fix IP timestamp option (IPOPT_TS_PRESPEC) handling in ip_options_echo()\n can: c_can: Fix tx_bytes accounting\n can: c_can_platform: fix irq check in probe\n ...\n" }, { "commit": "851d7cf647e0d31668eb5dc496f7698a2f6136b4", "tree": "15a292814827ef43cbfa6d28e41c7058bf71ebf7", "parents": [ "0c6f8a8b917ad361319c8ace3e9f28e69bfdb4c1" ], "author": { "name": "Thomas Gleixner", "email": "tglx@linutronix.de", "time": "Tue Mar 29 02:51:13 2011 +0200" }, "committer": { "name": "Thomas Gleixner", "email": "tglx@linutronix.de", "time": "Tue Mar 29 14:50:32 2011 +0200" }, "message": "genirq: Remove move_*irq leftovers\n\nAll users converted to new interface.\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\n" }, { "commit": "0c6f8a8b917ad361319c8ace3e9f28e69bfdb4c1", "tree": "b4b0cb4b619368bc93ff883f4b667e05a185549b", "parents": [ "dced35aeb0367dda2636ee9ee914bda14510dcc9" ], "author": { "name": "Thomas Gleixner", "email": "tglx@linutronix.de", "time": "Mon Mar 28 13:32:20 2011 +0200" }, "committer": { "name": "Thomas Gleixner", "email": "tglx@linutronix.de", "time": "Tue Mar 29 14:48:19 2011 +0200" }, "message": "genirq: Remove compat code\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\n" } ], "next": "a715dea3c8e9ef2771c534e05ee1d36f65987e64" }