)]}' { "log": [ { "commit": "76891c0de29a9cdebca5386a6d596b0caa747b44", "tree": "b6f31aa506da7a7edf4ed68abfd75f6dea539693", "parents": [ "c98e14d766312877579a5d61413f418c20ab6428" ], "author": { "name": "Praveena Pachipulusu", "email": "pveena@codeaurora.org", "time": "Wed Nov 16 22:01:00 2011 +0530" }, "committer": { "name": "Praveena Pachipulusu", "email": "pveena@codeaurora.org", "time": "Wed Nov 16 22:13:18 2011 +0530" }, "message": "Kbuild: Add msm_audio_amrnb.h and msm_audio_qcp.h\n\nChange-Id: Icaec1c0d5454dc2d6c3f85cb28d88fc334829296\nSigned-off-by: Praveena Pachipulusu \u003cpveena@codeaurora.org\u003e\n" }, { "commit": "51e947f6f540483f933b19ae733e54c3e7b35ae4", "tree": "e5ca2325ccf0ce274208bc53be6062f3e66ced07", "parents": [ "a4262a3821dd2d8d2207298e2afe702cf60cdcd7" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Nov 01 14:49:45 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Nov 14 08:19:17 2011 +0530" }, "message": "mfd: pm8xxx-misc: Add pm8xxx stay on API\n\nThe API configures the PMIC to ignore the PS_HOLD low\nsignal, which can be used during debugging.\n\nChange-Id: I162657934e34da081eb897d64ffed36ad48e4eff\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "a4262a3821dd2d8d2207298e2afe702cf60cdcd7", "tree": "ad4c5c0e3e6a6eeecaaa96d9a898e963fba1ebdc", "parents": [ "f762c9a5eea642253519234c73129620b159e708" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Thu Nov 10 00:02:18 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Nov 14 08:19:05 2011 +0530" }, "message": "mfd: pm8xxx-misc: Add pm8xxx hard reset config API\n\nThe API configures PMIC for different behaviour on hard reset.\nThe different options are to disable hard reset, shutdown or\nrestart on hard reset.\n\nChange-Id: I214d563e904dd7e73c98a454866718a60a11b6dd\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "27e8d537199bbcb12cbc4003529944048deae187", "tree": "7b53778b733473f3f4057c7b3112980f77cf09e1", "parents": [ "af0ac318cce9dfe3278d7c14e6d6c68ff4892b90", "a23c1cabcc3adce057d86deeb3efd6e31ec8c8c9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Nov 13 13:30:25 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Nov 13 13:30:25 2011 -0800" }, "message": "Merge changes I75853196,I9e677ebd,Id3802e37,Ic3fe2733 into msm-3.0\n\n* changes:\n mfd: pm8xxx-misc: Add pm8xxx watchdog reset control API\n mfd: pm8xxx-misc: Add pm8xxx smpl based API\u0027s\n mfd: pm8xxx-misc: Add the pm8xxx coincell chg API\n mfd: pm8xxx-misc: Add a ISR to handle 32 kHz OSC halt\n" }, { "commit": "72a2b5ddf538edeff41fecc1e702b26357875835", "tree": "1685345e1adf630f8f8c54cc3acacb3da194faef", "parents": [ "7805b5a4806ee0487ddeacd8b6e663d2f5da1ae4", "ae39c90df6023db71ee11b14be01873c7143e34e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 11 21:45:05 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Nov 11 21:45:05 2011 -0800" }, "message": "Merge \"hwmon: pm8xxx-adc: Merge pm8921-adc and pm8xxx-adc\" into msm-3.0" }, { "commit": "a23c1cabcc3adce057d86deeb3efd6e31ec8c8c9", "tree": "b14f3bddc8f313c384fe1be0114f226fc2f2ade3", "parents": [ "bfbaf82d21c81fa975f5973eb7b12afcd9a6f77a" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Nov 01 14:36:24 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Sat Nov 12 06:14:34 2011 +0530" }, "message": "mfd: pm8xxx-misc: Add pm8xxx watchdog reset control API\n\nThe API configures PMIC to either shutdown or reset\nwhen the PS_HOLD line goes low.\n\nChange-Id: I758531966c08ec5acafaeedea13b59019aafa8bc\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "bfbaf82d21c81fa975f5973eb7b12afcd9a6f77a", "tree": "565d58b00a4b08b1b77907c31b6e16837178339b", "parents": [ "7b3822911a18dd01f072cfba227dfcbae6947585" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Nov 01 14:28:34 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Sat Nov 12 06:14:14 2011 +0530" }, "message": "mfd: pm8xxx-misc: Add pm8xxx smpl based API\u0027s\n\nAdd APIs to:\n1. Configure PMIC to reset/shutdown on a SMPL event\n2. Set SMPL delay time\n\nChange-Id: I9e677ebd5b4339b50e7d18e2ba0eb3af694c2d20\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "7b3822911a18dd01f072cfba227dfcbae6947585", "tree": "8c4a893a7ec10e3ec79277caf6c77542a9732948", "parents": [ "8b8f189be8ccc21e880802abd531b4ab9f03c601" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Nov 01 14:08:34 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Sat Nov 12 06:13:39 2011 +0530" }, "message": "mfd: pm8xxx-misc: Add the pm8xxx coincell chg API\n\nThe API enables/disables the coincell charger. It also configures\nthe coincell charger\u0027s voltage and register settings.\n\nThe charger allows the coincell (connected to VCOIN) to charge\nfrom VBAT.\n\nChange-Id: Id3802e37d8100e6a72de9fd263e7d201a7a346d2\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "ab12ea460a9c2e0ad89fd259082dd783194d7c52", "tree": "b286b977c640f8bc9d8a04d069d2e8e72cd29ca3", "parents": [ "9a4cbbdf327b4277d4941973f7313f9f6e0e3f43", "456c4eac657c5aa983b74b8e53f8c803ee4aac90" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 19:31:34 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 10 19:31:34 2011 -0800" }, "message": "Merge changes Iccd3819c,If5856ead into msm-3.0\n\n* changes:\n ASoC: msm8960: add headphone over current protection type\n ASoC: wcd9310: add headphone over current protection feature\n" }, { "commit": "94583edbd43443218b23c3242b51a4767ee9ca5b", "tree": "c067d5e2c939a99bf57bc9caa42c218431533ca7", "parents": [ "99af3c9567087b5a2f8b923586ecd3ead85c6559", "ac510b92bec2b5557fe9724730ebb272e740cf77" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 16:32:29 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 10 16:32:29 2011 -0800" }, "message": "Merge \"ALSA: add headphone over current switches\" into msm-3.0" }, { "commit": "27ca661bdaa9e7cb1a255a046da3c799af519e34", "tree": "10dd30705bd62ec8f8e8df7c168b07625d8fb1be", "parents": [ "99e7c7d593e4016c252e45f0ea67c045348918c7" ], "author": { "name": "Alex Bird", "email": "alexbird@codeaurora.org", "time": "Tue Nov 01 14:40:06 2011 -0700" }, "committer": { "name": "Alex Bird", "email": "alexbird@codeaurora.org", "time": "Thu Nov 10 10:43:24 2011 -0800" }, "message": "msm: Add SMI callbacks to ION platform data.\n\nAs part of the transition from PMEM to ION, the interface for accessing\nSMI memory needs to be accessible from ION as it was from PMEM.\n\nChange-Id: Ia6f9475dc030bbb0dafdcc1b6dbe93c7cdeca268\nSigned-off-by: Alex Bird \u003calexbird@codeaurora.org\u003e\n" }, { "commit": "fd72eef7e285dd0b3e216f76bb7688fc7263de58", "tree": "c057af790b3cecef6b6e7da7a1ef41fa15842d8d", "parents": [ "89d5d6c47c760be8e980c06e2842e76413ee4d0a", "1801860c6622adc2ff6c3391092ea02d04436246" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 01:11:51 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 10 01:11:51 2011 -0800" }, "message": "Merge changes Id8440508,If012dcdb into msm-3.0\n\n* changes:\n msm: rotator: ion support in rotator driver\n msm-fb: display: ion framework support\n" }, { "commit": "89d5d6c47c760be8e980c06e2842e76413ee4d0a", "tree": "a6f9c26baf19fc1f627adf7b2be6455cc49d291a", "parents": [ "0e8a9c02f8b6730a509355b063a9e6c1e0b98789", "2d2a2c595ac579e285c3a69347989c72b175ff51" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 10 01:11:51 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 10 01:11:51 2011 -0800" }, "message": "Merge \"hwmon: msm_adc: Calibrate HK/XOADC\" into msm-3.0" }, { "commit": "ae39c90df6023db71ee11b14be01873c7143e34e", "tree": "eb6e3484d860969e04155c10916cd6fa7513bd98", "parents": [ "ec2515fdcb3070e7ec80bf865b01e43c8015a43f" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Wed Nov 09 17:54:31 2011 -0800" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Wed Nov 09 22:07:10 2011 -0800" }, "message": "hwmon: pm8xxx-adc: Merge pm8921-adc and pm8xxx-adc\n\nMerge changes from pm8921-adc to pm8xxx-adc. The\nchanges are modification to the BTM lookup table\nto map voltage vs temperature instead of A/D word\nvs temperature and reverse calibration on the\ninput voltage read for BTM. Fix setting the\nmpp_scale value to avoid compile error.\n\nThis keeps the pm8xxx-adc and pm8921-adc\nfunctional code as the same except for the name\nchange allowing future patch to remove the\npm8921-adc driver.\n\nChange-Id: I03a0b809cd232f7fe8dff86248651c9a2593be29\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "e69bed86ffa5b7cc05545fd986a21ebef5123775", "tree": "07c0747261499c4c06ed53fee397a41a62c4865d", "parents": [ "ec2515fdcb3070e7ec80bf865b01e43c8015a43f" ], "author": { "name": "Nagamalleswararao Ganji", "email": "nganji@codeaurora.org", "time": "Mon Oct 17 16:21:42 2011 -0700" }, "committer": { "name": "Naseer Ahmed", "email": "naseer@codeaurora.org", "time": "Wed Nov 09 15:19:07 2011 -0800" }, "message": "msm-fb: display: ion framework support\n\nAdd support for the ION memory manager\nto the framebuffer driver\n\nChange-Id: If012dcdbbc71eb0f7d4d429ad4789b3276d34a58\nSigned-off-by: Nagamalleswararao Ganji \u003cnganji@codeaurora.org\u003e\nSigned-off-by: Naseer Ahmed \u003cnaseer@codeaurora.org\u003e\n" }, { "commit": "596d4c29549f9e9a8d2909d6af21db56c718bdf0", "tree": "24e4a593d61a1824574962d40ff3a58bc6963103", "parents": [ "ec2515fdcb3070e7ec80bf865b01e43c8015a43f" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Wed Oct 19 18:04:01 2011 -0600" }, "committer": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Wed Nov 09 14:13:15 2011 -0700" }, "message": "msm: kgsl: Count a percentage of _io time\n\nCount different percentages based upon GPU frequency.\n\nChange-Id: Ia579f6705ff9858263f507bd4f3ba0f84b772554\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "49efeaccb1ef9ab57ba96c768385c87a7763c948", "tree": "600f5ae4da5092f8fff3e3cdbdeafb8469dcfa09", "parents": [ "ac510b92bec2b5557fe9724730ebb272e740cf77" ], "author": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Thu Nov 03 11:01:12 2011 -0700" }, "committer": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Wed Nov 09 10:19:16 2011 -0800" }, "message": "ASoC: wcd9310: add headphone over current protection feature\n\nwcd9310 CODEC supports notification of excessive current\ndrawn by headphone power amplifiers. When receiving notification\nfrom CODEC through interrupt, this driver reports this event\nthrough soc jack framework. At this point, power amplifiers will\nbe locked hence no audio can be heard. Locking would be removed\nonce user-space application deroutes playback out of headphone path.\n\nChange-Id: If5856ead31c9a6b8d918c09f1fdc517a69d4fa26\nSigned-off-by: Patrick Lai \u003cplai@codeaurora.org\u003e\n" }, { "commit": "fc464f0f66087745862fd9e327a4a07d4859bc27", "tree": "d278d34891a242ef9a0292392c3d9303878074aa", "parents": [ "109c29e7104bed0bed3cf9e61a48950c90a71c19" ], "author": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Fri Nov 04 21:54:00 2011 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 09 04:48:15 2011 -0700" }, "message": "usb: msm_otg: Vote for EXT_3P3V regulator for MHL connector\n\nIn case of 8960 Liquid, need to vote for EXT_3P3V regulator\nto avoid usb connection lost as MHL analog switch is powered\nby this regulator.\n\nChange-Id: Ifc36d7916a5407801fdf43357176efa264d160bd\nCRs-fixed: 315979\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\n" }, { "commit": "363899275cb2048fe105693c70a030d7b4e5af0f", "tree": "e6e48d28b5f55b9b96a75003deb423b30da424d2", "parents": [ "65d49c0b764379a710f1f1671dd250173efb034b", "2f2e8a5391cbbd08a329ff5bdf19bde815ae5f11" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 08 18:03:38 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 08 18:03:38 2011 -0800" }, "message": "Merge \"msm: audio: qdsp6v2: Add 4GV wb/nb support in mvs driver\" into msm-3.0" }, { "commit": "2d2a2c595ac579e285c3a69347989c72b175ff51", "tree": "3326c290b6824a9c63fd7e13d4ef4695324f51bd", "parents": [ "d39da5a41fb8728809fec30c72f798dee780af63" ], "author": { "name": "Vijayakumar Muthuvel Manickam", "email": "vmuthuve@codeaurora.org", "time": "Thu Oct 20 13:41:39 2011 -0700" }, "committer": { "name": "Vijayakumar Muthuvel Manickam", "email": "vmuthuve@codeaurora.org", "time": "Tue Nov 08 15:52:36 2011 -0800" }, "message": "hwmon: msm_adc: Calibrate HK/XOADC\n\nCalibration for HK/XOADC is done once at init by\nmsm_adc before the first ADC reading is processed.\n\nCalibration performed for every ADC read is expensive\nand not recommended. Remove support to request\ncalibration by ADC clients.\n\nAdd stubs for pmic8058 xoadc functions to fix\nfeaturization\n\nChange-Id: I7f0e165bddaa49c5daf33df5ed77428ccc1434c5\nSigned-off-by: Vijayakumar Muthuvel Manickam \u003cvmuthuve@codeaurora.org\u003e\n" }, { "commit": "ac510b92bec2b5557fe9724730ebb272e740cf77", "tree": "cb375782860003be320d60e01f2c4b43eac0d53e", "parents": [ "49277a6da10d05a66ba246bc47b10736393d6642" ], "author": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Thu Nov 03 08:32:51 2011 -0700" }, "committer": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Mon Nov 07 14:33:45 2011 -0800" }, "message": "ALSA: add headphone over current switches\n\nSome CODECs monitor current drawn by headphone power amplifer.\nIf current consumed goes over pre-defined threshold, CODEC would\ncommunicate to host processor. Then, CODEC driver would propagate\nthe event so user-space application can react accordingly.\nAdd support to propagate over current events for both\nleft headphone and right headphone through ALSA jack framework.\n\nChange-Id: Ieef36f070a4478a5a80ec4c8b0cc81464abd75ad\nSigned-off-by: Patrick Lai \u003cplai@codeaurora.org\u003e\n" }, { "commit": "27020d1b5db194e11b08dc46dd7b89078895b6eb", "tree": "59e1d1d6ee0542e1f91a63b763e9c6e1fb002125", "parents": [ "1baed2ff1aa1d07e8933786f539cdb77c61745a5" ], "author": { "name": "Vinay Kalia", "email": "vkalia@codeaurora.org", "time": "Fri Oct 14 17:50:29 2011 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Nov 05 17:33:26 2011 -0600" }, "message": "video: msm: Writeback support in mdp for WFD.\n\nAdds writeback mode in mdp for wifi-display(WFD).\nThis mode can be used to get the captured\nframes from mdp. This is added to support\nwifi-display capture device.\n\nChange-Id: Iae30cac65af181d8df4b514a128cd876fe7dda1c\nSigned-off-by: Vinay Kalia \u003cvkalia@codeaurora.org\u003e\n" }, { "commit": "2b592824f99dbbe85541787e8d273f2f55196498", "tree": "341001d473ec7c57ec5cb43cff29d3e16685140f", "parents": [ "49277a6da10d05a66ba246bc47b10736393d6642" ], "author": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Wed Nov 02 19:51:32 2011 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 04 14:09:57 2011 -0600" }, "message": "USB: EHCI: Configure HSIC host\u003c-\u003ehub\u003c-\u003eConventional USB devices\n\nSMSC hub must be configured so that Conventional USB\ndevices can be connected to SMSC hub on 8960 liquid.\n\nChange-Id: I261798de153d3c37f2fa2c4d7e15d96bb81c432f\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\n" }, { "commit": "e0d4643f8ea5c92b51f7ef315f5ca3625e095293", "tree": "df2b4159b6ca5cd63329ba6388f063fcd15a8e1c", "parents": [ "9fb872433d2400d50b8667a5f38b5a5b74ce0830", "76ee8d653f56b634b4a6e24a07126219c04e1842" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 04 11:04:37 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Nov 04 11:04:37 2011 -0700" }, "message": "Merge \"dt: add empty of_get_property for non-dt\" into msm-3.0" }, { "commit": "de09bc62406c6efe89dcba31a85c9feae6b2b336", "tree": "ff7ca7f959cf7028a934cbf0e0f068fb8f592598", "parents": [ "6ac99dac2fe6fed1ee951025744577fb8eb80493", "4c52652c01831f228dd3b6239e5d9cbac3e263e7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 04 11:04:37 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Nov 04 11:04:37 2011 -0700" }, "message": "Merge changes I3d56518b,I60f4e108 into msm-3.0\n\n* changes:\n msm8960: defconfig: Enable CONFIG_MMC_CLKGATE\n mmc: core: Use delayed work in clock gating framework\n" }, { "commit": "c4658f2250be26b6ae08a6d7be227c6b895eaffa", "tree": "8b75f787d7ea598129b9230a1f7c13f8fa896d71", "parents": [ "486129ea2ec1e9c298fc5ea604e328c9ea926c2e", "8eab35ab5a2f81436bfe75a67950306ef0a40862" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 04 01:11:07 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Nov 04 01:11:07 2011 -0700" }, "message": "Merge changes Ic0dedbad,Ic0dedbad into msm-3.0\n\n* changes:\n msm: kgsl: Add ION as an external memory source\n msm: kgsl: Fixup per-process memory statistics\n" }, { "commit": "76ee8d653f56b634b4a6e24a07126219c04e1842", "tree": "98d6eb3ed5d65a4526bd0272cd00c4fbdad26459", "parents": [ "68964c9905ea62251cc55b81197001d833509b27" ], "author": { "name": "Stephen Warren", "email": "swarren@nvidia.com", "time": "Fri Aug 05 16:50:30 2011 -0600" }, "committer": { "name": "Pavankumar Kondeti", "email": "pkondeti@codeaurora.org", "time": "Fri Nov 04 08:25:05 2011 +0530" }, "message": "dt: add empty of_get_property for non-dt\n\nThe patch adds empty function of_get_property for non-dt build, so that\ndrivers migrating to dt can save some \u0027#ifdef CONFIG_OF\u0027.\n\nThis also fixes the current Tegra compile problem in linux-next.\n\nChange-Id: I2b60b6b9172051e847a0b1e4cc38e80ffc147047\nSigned-off-by: Stephen Warren \u003cswarren@nvidia.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nSigned-off-by: Pavankumar Kondeti \u003cpkondeti@codeaurora.org\u003e\n" }, { "commit": "30dbf3483f95594a5d9692ae80cfa638eaa44d2c", "tree": "87c17d965e36d188bc69fecb0ccf6b3bd4a7199d", "parents": [ "3b2357b0c32b8b1131da672e57fb3d2c5115a316", "b377415f17eae6c54f8e4035df8649cde99c7199" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 03 15:35:08 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 03 15:35:08 2011 -0700" }, "message": "Merge \"hwmon: pm8921-adc: Add reverse calibration for BTM\" into msm-3.0" }, { "commit": "2292028c224bbfd828cec9ebe73031ff98750150", "tree": "8f4b5a938bbae5e36a751f480d7a57a9ac96904e", "parents": [ "2b4bf3a674e1a750883c239be78ab33768c33c61" ], "author": { "name": "Santosh Mardi", "email": "gsantosh@codeaurora.org", "time": "Wed Oct 26 02:38:40 2011 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 03 13:28:59 2011 -0600" }, "message": "ASoC: wcd9310: Update legacy mode, txfe controls based on platform data\n\nBased on tabla platform data update the legacy mode, txfe bypass and\ntxfe buff mode on tx path.\n\nCRs-Fixed: 308208\nChange-Id: I96df7a213578ed8e975030dc8d4b983d03eb6518\nSigned-off-by: Santosh Mardi \u003cgsantosh@codeaurora.org\u003e\n" }, { "commit": "c478970dc7f330b284c9e9f0920a35e79b390ce1", "tree": "736b1d03b738ffb4abed94d8872f1781e395c68c", "parents": [ "ef4bbc1e3c85aab548d732bba0616382f21adadb", "e45c3d38a693fe0011cbcb0c6a5302f1e4bf2d8a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 03 00:21:06 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 03 00:21:06 2011 -0700" }, "message": "Merge \"power: pm8921-charger: use trickle time for trickle charging\" into msm-3.0" }, { "commit": "0d0bc29d8ca4135161f504d1d258547bd837e898", "tree": "35b724581f903e679ba4f607e514c49bf82d03ec", "parents": [ "ef4bbc1e3c85aab548d732bba0616382f21adadb" ], "author": { "name": "Sujit Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Wed Oct 19 11:40:04 2011 +0530" }, "committer": { "name": "Sujit Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Thu Nov 03 11:27:49 2011 +0530" }, "message": "mmc: core: Use delayed work in clock gating framework\n\nCurrent clock gating framework disables the MCI clock as soon as the\nrequest is completed and enables it when a request arrives. This aggressive\nclock gating framework when enabled cause following issues:\n\nWhen there are back-to-back requests from the Queue layer, we unnecessarily\nend up disabling and enabling the clocks between these requests since 8MCLK\nclock cycles is a very short duration compared to the time delay between\nback to back requests reaching the MMC layer. This overhead can effect the\noverall performance depending on how long the clock enable and disable\ncalls take which is platform dependent. For example on some platforms we\ncan have clock control not on the local processor, but on a different\nsubsystem and the time taken to perform the clock enable/disable can add\nsignificant overhead.\n\nAlso if the host controller driver decides to disable the host clock too\nwhen mmc_set_ios function is called with ios.clock\u003d0, it adds additional\ndelay and it is highly possible that the next request had already arrived\nand unnecessarily blocked in enabling the clocks. This is seen frequently\nwhen the processor is executing at high speeds and in multi-core platforms\nthus reduces the overall throughput compared to if clock gating is\ndisabled.\n\nFix this by delaying turning off the clocks by posting request on\ndelayed workqueue. Also cancel the unscheduled pending work, if any,\nwhen there is access to card.\n\nsysfs entries are provided to tune the delay as needed with default\nvalue set to 200ms.\n\nChange-Id: I60f4e1087c4f22bfe7817153c54a0c72ae22b6b6\nSigned-off-by: Sujit Reddy Thumma \u003csthumma@codeaurora.org\u003e\n" }, { "commit": "8eab35ab5a2f81436bfe75a67950306ef0a40862", "tree": "aa4f9aa10de5bcc5f44ac4dce617f3705910331d", "parents": [ "1b897cfe92f2e8c61174a3eab64c83f35db00fc8" ], "author": { "name": "Jordan Crouse", "email": "jcrouse@codeaurora.org", "time": "Wed Oct 12 16:57:48 2011 -0600" }, "committer": { "name": "Tarun Karra", "email": "tkarra@codeaurora.org", "time": "Wed Nov 02 18:29:03 2011 -0700" }, "message": "msm: kgsl: Add ION as an external memory source\n\nAllow ION buffers to be attached via IOCTL_KGSL_MAP_USER_MEM\n\nChange-Id: Ic0dedbada34d12fb70b528f3a93dd21805a4c8a4\nSigned-off-by: Jordan Crouse \u003cjcrouse@codeaurora.org\u003e\n" }, { "commit": "f9929b1e29fc6f96bbe4e5d5d5ba437ceaa07c5d", "tree": "a66dc2098b1e3db5ecd9392656db690f896d726c", "parents": [ "3c0e977e524ba9071755707f168da8e4dc692606" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Wed Sep 07 15:57:36 2011 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 02 14:49:16 2011 -0600" }, "message": "input: cyttsp-i2c: Move regulators to LPM/HPM in suspend/resume\n\nChange-Id: I341f33d2627dc9f3f7c511a69db8a84c4b886841\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "63cfd7e6a2d2724963ebb42e26c9fc0e0b587484", "tree": "46395f4e89a8c36fb45e9f1c2ee9a1496f8499ef", "parents": [ "a757e0c25e70b55df9965db5611005cbc34d5440" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Mon Oct 10 18:21:01 2011 -0700" }, "committer": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Tue Nov 01 16:30:51 2011 -0700" }, "message": "8660: Add support for Ion\n\nAdd support for Ion\n\nChange-Id: I1c04b8a6df005c6ced8681f419f4445592b4832d\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "e45c3d38a693fe0011cbcb0c6a5302f1e4bf2d8a", "tree": "d6f79260f67f7a6bb36ee594e3ceb768064b84af", "parents": [ "a757e0c25e70b55df9965db5611005cbc34d5440" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Oct 19 19:46:48 2011 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 01 16:28:57 2011 -0600" }, "message": "power: pm8921-charger: use trickle time for trickle charging\n\nCorrect a typo where safety time is used for trickle charge time\nin the code.\n\nAdd the valid ranges and power on defaults for safety timer and\ntrickle charge timer.\n\nCRs-Fixed: 313652\nChange-Id: I49a04c6445d197555b2a434bf4577b6e38e3d3e3\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "b377415f17eae6c54f8e4035df8649cde99c7199", "tree": "1bd761af757f007e286d6d33e676786c7c31362c", "parents": [ "119a70392faea32d4ed0d424af87ec1d13e0afd8" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Wed Oct 26 16:51:58 2011 -0700" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Tue Nov 01 11:17:45 2011 -0700" }, "message": "hwmon: pm8921-adc: Add reverse calibration for BTM\n\n-Change BTM threshold table to map temperature vs\ninput voltage instead of temperature vs A/D word.\nApply reverse calibration to convert the input\nvoltage to A/D word.\n-Fix representing low/high threshold voltage as\na signed int.\n\nCRs-Fixed: 313653\nChange-Id: Ib565c672130f8a246a05636c1353ef0d5b373b7d\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "6557696b6539e2a38369d86e2d3926ac4f850d33", "tree": "72e2e7c78a153609751e1699ec481fbed47f937a", "parents": [ "182247634b10b4ad58ce7fc28a1d4175d02dfe2b" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Mon Oct 31 12:13:25 2011 -0700" }, "committer": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Mon Oct 31 22:40:09 2011 -0700" }, "message": "gpu: ion: Add header file for ERR_PTR\n\nAdd err.h for the declaration of ERR_PTR which\nis used with the stubbed out ion headers.\n\nChange-Id: Ic5e5aea556723ea6b9c8953ef54ad5a82d3761ec\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "ebd2931e4212e431aa033d3826318040b06f188c", "tree": "52e14fd7465c37798bc0f0ceac1fdb865e9b2953", "parents": [ "03122326da45599e720d1bd88e4e10c9c187a4a9", "15f25535688609ec29b7f6e5921721953ef33345" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Oct 31 05:54:03 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Oct 31 05:54:03 2011 -0700" }, "message": "Merge \"USB: Add nop functions for !USB case\" into msm-3.0" }, { "commit": "5213eb8787cfb6dd834b670511bfdc4c9372c9be", "tree": "2774db717ca9b38b2aebce285866cde5fcccb6d4", "parents": [ "cf95677cc36cb1202417845bbd0f753e140ad77f" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Oct 24 14:44:58 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Oct 31 11:19:34 2011 +0530" }, "message": "mfd: pm8xxx-misc: Add uart gpio mux control API\n\nCRs-Fixed: 313982\nChange-Id: I10ea5283271619f0ae510ad7039e0df8b1745f57\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "15f25535688609ec29b7f6e5921721953ef33345", "tree": "7923bef8f584121a9a396c5ef958f1e2542cb73b", "parents": [ "cf95677cc36cb1202417845bbd0f753e140ad77f" ], "author": { "name": "Pavankumar Kondeti", "email": "pkondeti@codeaurora.org", "time": "Thu Oct 27 14:51:45 2011 +0530" }, "committer": { "name": "Pavankumar Kondeti", "email": "pkondeti@codeaurora.org", "time": "Mon Oct 31 09:02:45 2011 +0530" }, "message": "USB: Add nop functions for !USB case\n\nOTG drivers that use USB core functions like usb_add_hcd, usb_remove_hcd,\netc can be selected for gadget only mode without selecting CONFIG_USB.\n\nChange-Id: Ie4b0c1703622cc9051ad9f50b8901f0005daeeb6\nSigned-off-by: Pavankumar Kondeti \u003cpkondeti@codeaurora.org\u003e\n" }, { "commit": "2d1760b4f1aa785d637a389b29712cf3ecfacfa6", "tree": "c9e62636dff4468f430ff3643eae8638bd5fc3d4", "parents": [ "9e9224d409df2c83ce926daba3381f60aa4dd296" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Thu Sep 29 21:31:24 2011 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Oct 30 06:02:16 2011 -0600" }, "message": "board-msm8960: Add ion heaps corresponding to pmem heaps\n\nAdd adsp heaps for ion. This corresponds directly\nto what pmem currently does. This also includes disabling\nthe adsp and pmem heaps for pmem.\n\nChange-Id: I4354c713413ebbe949579741efdd75e9c444c8e7\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "8cd4832d4d7fe3acb47720c64c9284c974ff2962", "tree": "11997ecc3bfdf37e25d32fd42300ca492a199f14", "parents": [ "273dd8e94a71079a415d2814a61c2c4dc9e4cb86" ], "author": { "name": "Jordan Crouse", "email": "jcrouse@codeaurora.org", "time": "Wed Oct 12 17:05:19 2011 -0600" }, "committer": { "name": "Jordan Crouse", "email": "jcrouse@codeaurora.org", "time": "Fri Oct 28 15:27:14 2011 -0600" }, "message": "gpu: ion: Add inline stubs for Ion functions\n\nAdd inline stubs for in-kernel Ion functions to use when\nIon is not enabled in the kernel config.\n\nChange-Id: Ic0dedbadbe4d7bab8f24763e67dd775c769b06df\nSigned-off-by: Jordan Crouse \u003cjcrouse@codeaurora.org\u003e\n" }, { "commit": "273dd8e94a71079a415d2814a61c2c4dc9e4cb86", "tree": "0a69a689296137ddfc3d988d806657ef0c8417f8", "parents": [ "804c6b5a2672e2603d90ec6e1861a615b8ab0157" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Wed Oct 12 14:26:33 2011 -0700" }, "committer": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Fri Oct 28 13:18:34 2011 -0700" }, "message": "gpu: ion: Add API to get the buffer flags\n\nClients may want to know what the existing flags are on a\nhandle for mapping, cache flushing or other purposes. Add\nan API to get those flags.\n\nChange-Id: I2d8c93194d1fc940042529b8851ebecf35d6e3de\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "8cce8536a179201c1a004a752ca1645279986fec", "tree": "789bec601efbc39096ef3c644c05ea350fd07f13", "parents": [ "988d3559012abe2b40dec703d41e6bf020547483", "cef69869e17524487cd0947f74d8cf50b377a09f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 28 11:59:46 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 28 11:59:46 2011 -0700" }, "message": "Merge changes I4ac6f9ef,I96bc377c,Ia5fdfb02,I601d24ef into msm-3.0\n\n* changes:\n mmc: core: use non-reentrant workqueue for clock gating\n mmc: core: prevent aggressive clock gating racing with ios updates\n mmc: rename mmc_host_clk_{ungate|gate} to mmc_host_clk_{hold|release}\n Revert \"mmc: fix a race between card-detect rescan and clock-gate work instances\"\n" }, { "commit": "b89e7c3714312307dd1003cebdcdc69f6f8eccc9", "tree": "8480037420391107fd763137dfccfd63cd98e479", "parents": [ "702938ffea5d35707ece02a9a7e5f4b9ba7bedc6", "bbebbfed7449e6152fe014d91a3f71fe30941fb8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Oct 27 18:42:13 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Oct 27 18:42:13 2011 -0700" }, "message": "Merge \"cne: Add reference count for Smart Wireless Interface Manager\" into msm-3.0" }, { "commit": "cf5a9faf69da8a7db6580c3b2c60c948b5b29237", "tree": "36d7a7fca39fee2e0c3f3bf9289490ded687f0d6", "parents": [ "831b1447dd9fd83ed4c3892229e513b56cd411dd", "d31ef501b8f0a1e04864c88f736bcbc8cedf27d6" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Oct 27 14:35:52 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Oct 27 14:35:52 2011 -0700" }, "message": "Merge \"power: pm8921-charger: enable external charger\" into msm-3.0" }, { "commit": "bbebbfed7449e6152fe014d91a3f71fe30941fb8", "tree": "c564adad0353f0b21cee5f3de341059c1d1db418", "parents": [ "6ceedfbe1336433ac0b79d0312d70edf9e1bdc84" ], "author": { "name": "Chinh Tran", "email": "chinht@codeaurora.org", "time": "Wed Oct 26 16:14:15 2011 -0700" }, "committer": { "name": "Chinh Tran", "email": "chinht@codeaurora.org", "time": "Thu Oct 27 09:23:11 2011 -0700" }, "message": "cne: Add reference count for Smart Wireless Interface Manager\n\nAdd the reference count for Smart Wireless Interface Manager to\nknow whether there are any process who still has the socket in\nquestion in use or not.\nEnable INET DIAG.\nRedefine the TCP_FLAG as it gives compiling error when an enum is defined\nby a function return.\n\nChange-Id: I1aa9c810fec2e332048c9ef4199ec3f996bc3a75\nSigned-off-by: Chinh Tran \u003cchinht@codeaurora.org\u003e\n" }, { "commit": "d5ad0085fecaee5d6c13456cdb540f073648df33", "tree": "63e484bba1140323b37a68b4cbddf322397da26c", "parents": [ "5376b78c4579761d00410c908a9316c48e18980e", "0737d65bb7faf91f3dbf87c32a86c5e7cb9e454e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Oct 26 19:23:20 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Oct 26 19:23:21 2011 -0700" }, "message": "Merge \"msmfb: display: support for overlay wait ioctl\" into msm-3.0" }, { "commit": "868312e9340aeea16d934a1a9f46185a0ccc43ce", "tree": "d5b108b77fa1c99a36b9c76f296b1113356694ae", "parents": [ "fc2b8d83843a5805964bd469a9979c973bed388b" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Fri Sep 16 13:57:13 2011 -0700" }, "committer": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Wed Oct 26 12:23:49 2011 -0700" }, "message": "leds: pm8xxx: Add PWM feature in leds-pm8xxx\n\nPass PWM period and other configuration from board file.\nUpdate the LPG LUT based on the duty cycles,\npause count, and period.\n\nChange-Id: Ie1812ae8010d986a943af6f3883b13c25bc7244c\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "d31ef501b8f0a1e04864c88f736bcbc8cedf27d6", "tree": "afd0129a51f577ac58c4c0638c1034bdf85865fa", "parents": [ "fe0790d139f4ead7f63d562af6e26ee7c8b57b83" ], "author": { "name": "Amir Samuelov", "email": "amirs@codeaurora.org", "time": "Wed Oct 26 14:41:36 2011 +0200" }, "committer": { "name": "Amir Samuelov", "email": "amirs@codeaurora.org", "time": "Wed Oct 26 14:41:36 2011 +0200" }, "message": "power: pm8921-charger: enable external charger\n\nThe pmic 8921 charger has a limit of 2Amp of charge current. This limit\nmakes it inadequate to charge multi-cell batteries.\n\nThe pm8921 charger supports a configuration where an external charger\nwith more current capacity may be used to charge the battery while the\npm8921 itself can charge from a USB source. In such a configuration\nthe external charger source is connected to the DCIN pins, this makes the\npmic detect insertion and removal of the external charger source. In turn\nthis enables automatic switching on or off the usb charging path when an\nexternal charger is plugged out or in respectively. The pm8921 charger\ndriver has to call start and stop on external charger. The internal\nFSM and logic correctly indicates that it is charging from a DC source.\n\nThe resume charging of a fully charged battery when an external source\nis present needs to start charging from an external source. The driver\nrelies on VBATDET comparator to signal a low.\n\nChange-Id: Iab5439ac2408ab061bce477f4d41d7b6a8de9b38\nSigned-off-by: Amir Samuelov \u003camirs@codeaurora.org\u003e\n" }, { "commit": "0737d65bb7faf91f3dbf87c32a86c5e7cb9e454e", "tree": "7d939e00cd1734bfa3bc9b93c3d34d49e30725b4", "parents": [ "b995288691d2bd5cc1973d5854a037e6b8e5b87a" ], "author": { "name": "Nagamalleswararao Ganji", "email": "nganji@codeaurora.org", "time": "Fri Oct 14 02:02:33 2011 -0700" }, "committer": { "name": "Nagamalleswararao Ganji", "email": "nganji@codeaurora.org", "time": "Tue Oct 25 23:35:15 2011 -0700" }, "message": "msmfb: display: support for overlay wait ioctl\n\nthis adds supports for overlay wait ioctl and it allows the\nuserapce start overlay play and HDMI and can call wait\nlater point of the time\n\nChange-Id: I8000cc52a497861e0a5fdfe58c0c049219724ab6\nSigned-off-by: Nagamalleswararao Ganji \u003cnganji@codeaurora.org\u003e\n" }, { "commit": "5fdf175187b2db1421230b15c8c1cfa5018bda6b", "tree": "9e18bb82e8c9e3ec08b7e0aff649a723b836f26f", "parents": [ "772bf550c4bc16acfb53a4a117b94e5a3b725969" ], "author": { "name": "Chris Ball", "email": "cjb@laptop.org", "time": "Mon May 16 11:32:26 2011 -0400" }, "committer": { "name": "Sujit Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Tue Oct 25 16:33:23 2011 +0530" }, "message": "Revert \"mmc: fix a race between card-detect rescan and clock-gate work instances\"\n\nThis reverts commit 26fc8775b51484d8c0a671198639c6d5ae60533e, which has\nbeen reported to cause boot/resume-time crashes for some users:\n\nhttps://bbs.archlinux.org/viewtopic.php?id\u003d118751.\n\nChange-Id: I601d24efb867446156d2cc9db43a7697b6f52618\nSigned-off-by: Chris Ball \u003ccjb@laptop.org\u003e\nCc: \u003cstable@kernel.org\u003e\nSigned-off-by: Sujit Reddy Thumma \u003csthumma@codeaurora.org\u003e\n" }, { "commit": "dd346d2474565df8c94d2a39b57fd0f134e526e9", "tree": "f3b2d627cf69bb6f8d4238c95d3378204f4cdef4", "parents": [ "9930eb0a7670ff48935b4f3d49b4190c36887adc", "da40882a119d63fdbe2469f955460180fe22b5e3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Oct 24 17:10:20 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Oct 24 17:10:20 2011 -0700" }, "message": "Merge changes Ibb7afffd,Ie00815ed into msm-3.0\n\n* changes:\n msm: board-qrd7627a: Add support for synaptics touchscreen\n input: touchscreen: Add support for synaptics clearpad3000\n" }, { "commit": "971a0ee566cbe64558020ee6c254910516a43549", "tree": "a2d7fa66effa881da7c7fdb70c702a2867446550", "parents": [ "6469dfb4eeada88ded776eebdd8a687146ffa286" ], "author": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Tue Jul 26 03:19:06 2011 -0600" }, "committer": { "name": "Sathish Ambley", "email": "sambley@codeaurora.org", "time": "Mon Oct 24 10:42:45 2011 -0700" }, "message": "dt/irq: add irq_domain_generate_simple() helper\n\nirq_domain_generate_simple() is an easy way to generate an irq translation\ndomain for simple irq controllers. It assumes a flat 1:1 mapping from\nhardware irq number to an offset of the first linux irq number assigned\nto the controller\n\nChange-Id: I0820754314a0c15b1cc9881bc38b75b0de2509b2\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nSigned-off-by: Sathish Ambley \u003csambley@codeaurora.org\u003e\n" }, { "commit": "6469dfb4eeada88ded776eebdd8a687146ffa286", "tree": "bda65acc3b37508de2c9829cb18bc90ea9fabdd1", "parents": [ "00f0deb25f2074062b0af7db870b8f34b4906b1d" ], "author": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Tue Jul 26 03:19:06 2011 -0600" }, "committer": { "name": "Sathish Ambley", "email": "sambley@codeaurora.org", "time": "Mon Oct 24 10:42:45 2011 -0700" }, "message": "irq: add irq_domain translation infrastructure\n\nThis patch adds irq_domain infrastructure for translating from\nhardware irq numbers to linux irqs. This is particularly important\nfor architectures adding device tree support because the current\nimplementation (excluding PowerPC and SPARC) cannot handle\ntranslation for more than a single interrupt controller. irq_domain\nsupports device tree translation for any number of interrupt\ncontrollers.\n\nThis patch converts x86, Microblaze, ARM and MIPS to use irq_domain\nfor device tree irq translation. x86 is untested beyond compiling it,\nirq_domain is enabled for MIPS and Microblaze, but the old behaviour is\npreserved until the core code is modified to actually register an\nirq_domain yet. On ARM it works and is required for much of the new\nARM device tree board support.\n\nPowerPC has /not/ been converted to use this new infrastructure. It\nis still missing some features before it can replace the virq\ninfrastructure already in powerpc (see documentation on\nirq_domain_map/unmap for details). Followup patches will add the\nmissing pieces and migrate PowerPC to use irq_domain.\n\nSPARC has its own method of managing interrupts from the device tree\nand is unaffected by this change.\n\nChange-Id: Ia5fa674a97c85e2fc8e30275753b1494a97bd1d9\nAcked-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nSigned-off-by: Sathish Ambley \u003csambley@codeaurora.org\u003e\n" }, { "commit": "0c2b0b6ebca94dab1c6d4dd7e4d7dada98260332", "tree": "8a5585a08cebe20a9741d6c9dbcb153f38acddba", "parents": [ "4320c26e053d5e71e1afbc3f5fee829254527e7e", "e91f55cdb5f9d7051ec6a6e7069e27e1bc3d4350" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Oct 24 01:52:02 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Oct 24 01:52:03 2011 -0700" }, "message": "Merge \"mfd: 8018: Add led and pwm devices\" into msm-3.0" }, { "commit": "6f0884bf86ca22ffb8a76150b31fa48cafe45751", "tree": "c6bd6a0aa4b7dd10deaa2043db2d13c7574a2a1b", "parents": [ "5e21bfdcabda277410511d85fdbbc5faa93a090f" ], "author": { "name": "Taniya Das", "email": "tdas@codeaurora.org", "time": "Tue Sep 06 16:24:21 2011 +0530" }, "committer": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Mon Oct 24 12:12:17 2011 +0530" }, "message": "input: touchscreen: Add support for synaptics clearpad3000\n\nChange-Id: Ie00815ed507d81c6934ac0d4b1dfa745215ff01a\nSigned-off-by: Taniya Das \u003ctdas@codeaurora.org\u003e\n" }, { "commit": "caeef66d6df3f77a70d1ddfae85d61c783e7d844", "tree": "a811436966430bbcacce26c13e3117d24a9a5f13", "parents": [ "92a6c85f3efe294fee5a061366a9b2d8a2bb1b07", "bace50b68cb37220406094be7ced3b268e3e9556" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Oct 23 16:41:13 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Oct 23 16:41:13 2011 -0700" }, "message": "Merge changes I75900b24,Ibca9cdbf,Ic926e968 into msm-3.0\n\n* changes:\n input: atmel_mxt_ts: Move regulators to LPM/HPM in suspend/resume\n input: atmel_mxt_ts: Add retry mechanism for I2C read/write\n input: atmel_mxt_ts: Clean up pdata and update config array\n" }, { "commit": "f22463f414d74984de74b15e71bf729039e7c1e0", "tree": "055f33037a275e2208bd46b93a0d8c2d7a173067", "parents": [ "9f5f6e5fabdb48db949beb682b42ae7a6bb50176", "a6c514f3fbf9d08562655f183c4949a2520046ef" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 21 11:59:27 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 21 11:59:28 2011 -0700" }, "message": "Merge changes Id6b5096f,Ic8bd7e13 into msm-3.0\n\n* changes:\n eeprom_93cx6: Add write support\n eeprom_93cx6: Add data direction control.\n" }, { "commit": "9f5f6e5fabdb48db949beb682b42ae7a6bb50176", "tree": "9a13a7585e36e8b32f18ca84e1758621b94fddb7", "parents": [ "3409a0ad317279b827a74f27776f5a82a3a7f4e1", "0a3dc88214ed193169eda76ebae0cdda9b795cb8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 21 11:59:27 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 21 11:59:28 2011 -0700" }, "message": "Merge changes Idb1e623b,I854d90ac into msm-3.0\n\n* changes:\n msm_rq_stats: removing calculation of rq_stats\n rq_stats: Doing rq_stats calculation in the scheduler tick.\n" }, { "commit": "2f863174f9c5f974b1e4fbe7f0e17de5c9118122", "tree": "aac4c1c714c419c575d86f109fa1b9fa1bd6c018", "parents": [ "829af4815d3314c8c2661fea4f5c807fb0641ef0" ], "author": { "name": "Jing Lin", "email": "jinglin@codeaurora.org", "time": "Mon Oct 17 10:56:58 2011 -0700" }, "committer": { "name": "Jing Lin", "email": "jinglin@codeaurora.org", "time": "Fri Oct 21 11:46:20 2011 -0700" }, "message": "input: atmel_mxt_ts: Clean up pdata and update config array\n\nRemove blen, tchthr, x_line, y_line, orient and voltage from platform\ndata to not to overwrite the config data with these values. Update\nconfig array to have the proper values.\nTurn on i2c_pull_up in platform data.\n\nChange-Id: Ic926e96886f52cea3dad29e9a44559b26c717259\nSigned-off-by: Jing Lin \u003cjinglin@codeaurora.org\u003e\n" }, { "commit": "e91f55cdb5f9d7051ec6a6e7069e27e1bc3d4350", "tree": "c4ed303bc49dd67d2ee504d9ed0bfdf49ea3cbe5", "parents": [ "829af4815d3314c8c2661fea4f5c807fb0641ef0" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Mon Oct 17 15:10:07 2011 -0700" }, "committer": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Fri Oct 21 10:39:28 2011 -0700" }, "message": "mfd: 8018: Add led and pwm devices\n\nChange-Id: I92b9f6956aac24cef8898ce59263dd80b5b30d3f\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "12c97b5651627b46e80364ed693fde0ff2c5b2c7", "tree": "708cab01a43d2336201012bb7180b0d5c5e5ebb3", "parents": [ "a7620516bbe2942cf4888ad1f28e67e44c061dfe", "e3316a10982cfd753c9824abe249c2096d4f68e3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 21 06:05:39 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 21 06:05:40 2011 -0700" }, "message": "Merge changes I7cdf8e45,Id54dcc80 into msm-3.0\n\n* changes:\n USB: EHCI: msm: Configure GPIOs for HSIC strobe and data lines\n USB: EHCI: msm: Add support for HSIC based Host Controller\n" }, { "commit": "391afad3862f190f9d3c7a30d7cae697d175d13e", "tree": "f6aea87472b3923b22b1cae9ed98e2f0f0dee868", "parents": [ "fd5b55d057e7d2842cbc50f2386ed89d2b5c41f7", "fb8e3c1d0c97219d251f4a3b2d90c2daad3d79a5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 21 03:06:17 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 21 03:06:17 2011 -0700" }, "message": "Merge \"diag: Add support for APQ8064\" into msm-3.0" }, { "commit": "ab1ae8599731ef7315282465ea1ebdf2fe60563e", "tree": "997e40ec7f7afb2711a139996b3901f0c9ed5a10", "parents": [ "a61c8fb9f3d115005c43ffc50f624fb70a39cdb0", "4b99172a1df8b1ad2b48343bead39685f294e680" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Oct 20 22:35:31 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Oct 20 22:35:31 2011 -0700" }, "message": "Merge \"msm_fb: display: CSC Matrix update support is added\" into msm-3.0" }, { "commit": "a6c514f3fbf9d08562655f183c4949a2520046ef", "tree": "665a573bcd54af8b58669ba6e82ad1eb91ed57df", "parents": [ "69215d9680873e76042c902ee6df49f8085b11f5" ], "author": { "name": "Ben Dooks", "email": "ben@simtec.co.uk", "time": "Thu Apr 29 13:16:25 2010 +0000" }, "committer": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Thu Oct 20 19:02:06 2011 -0700" }, "message": "eeprom_93cx6: Add write support\n\nAdd support for writing data to EEPROM.\n\nChange-Id: Id6b5096f2d59d21773c06ba3803151c2f3248956\nSigned-off-by: Ben Dooks \u003cben@simtec.co.uk\u003e\nCc: Wolfram Sang \u003cw.sang@pengutronix.de\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Linux Kernel \u003clinux-kernel@vger.kernel.org\u003e\n[sboyd@codeaurora.org: use usleep_range() instead of msleep()]\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "69215d9680873e76042c902ee6df49f8085b11f5", "tree": "0ca51b22f70863c02ff251ef931f8315ae8453bd", "parents": [ "b8b5669957f3fe0378c431013dca33757e05bda0" ], "author": { "name": "Ben Dooks", "email": "ben@simtec.co.uk", "time": "Thu Apr 29 13:16:24 2010 +0000" }, "committer": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Thu Oct 20 19:02:06 2011 -0700" }, "message": "eeprom_93cx6: Add data direction control.\n\nSome devices need to know if the data is to be output or read, so add a\ndata direction into the eeprom structure to tell the driver whether the\ndata line should be driven.\n\nThe user in this case is the Micrel KS8851 which has a direction\ncontrol for the EEPROM data line and thus needs to know whether\nto drive it (writing) or to tristate it for receiving.\n\nChange-Id: Ic8bd7e13ce9bde423001ca23f3de02e76e1dbdaf\nSigned-off-by: Ben Dooks \u003cben@simtec.co.uk\u003e\nCc: Wolfram Sang \u003cw.sang@pengutronix.de\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Linux Kernel \u003clinux-kernel@vger.kernel.org\u003e\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "5bcd20614d16a02d774c16a94e2c706e5939ad15", "tree": "9321ce8f58479f195af9a059aaca1ae458f51529", "parents": [ "f1df53d2843c8643d56d637ce1de242037613ab8" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Oct 06 15:51:41 2011 -0700" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Oct 20 18:07:37 2011 -0700" }, "message": "mfd: pm8018: Add PM8018 ADC resource\n\nChange-Id: I6a4df32671b95070cdb719d80767f0ffde8cd40a\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "f49d99bc4168c7937655bb09989cc72525163b40", "tree": "ad0c9564e7bb8b3e845917440ee34578fb8f5e51", "parents": [ "a21ec56a1e1d13b1cc3a6f62a39c2be49c450747" ], "author": { "name": "Amar Singhal", "email": "asinghal@codeaurora.org", "time": "Mon Aug 22 19:02:04 2011 -0700" }, "committer": { "name": "Amar Singhal", "email": "asinghal@codeaurora.org", "time": "Thu Oct 20 14:35:49 2011 -0700" }, "message": "rq_stats: Doing rq_stats calculation in the scheduler tick.\n\nWith this change, we do the average run queue statistics calculation\nin the scheduler tick itself. This helps avoid any extra timers to\ndo the same. Also doing this calculation in the scheduler tick avoids\nany bias if the calculation is done in a workqueue\n\nChange-Id: I854d90acc05cc7a7226487be5555976826d8c837\nSigned-off-by: Amar Singhal \u003casinghal@codeaurora.org\u003e\n" }, { "commit": "e3316a10982cfd753c9824abe249c2096d4f68e3", "tree": "4d94a4860f749cd52b0eab26cca3e46e7c2c0c99", "parents": [ "39025fee42f6926aba0a213fb7fdd90633bc5cfd" ], "author": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Sat Oct 15 06:05:17 2011 +0530" }, "committer": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Fri Oct 21 00:15:27 2011 +0530" }, "message": "USB: EHCI: msm: Configure GPIOs for HSIC strobe and data lines\n\nAs part of HSIC initialization, in addition to enabling HSIC host\nmode and periodic pad calibration, need to configure GPIO150 and\nGPIO151 pins for HSIC strobe and data lines respectively for\nproper data communication between HSIC devices.\n\nChange-Id: I7cdf8e4532045d813ac6c6e3f53455d0a640245b\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\n" }, { "commit": "39025fee42f6926aba0a213fb7fdd90633bc5cfd", "tree": "75e9be5957b522a0804e4dbf41552a23f7984c18", "parents": [ "c60c2d46299ec789b639c9b0e7dc82f130fa6603" ], "author": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Sat Oct 15 05:55:10 2011 +0530" }, "committer": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Fri Oct 21 00:14:26 2011 +0530" }, "message": "USB: EHCI: msm: Add support for HSIC based Host Controller\n\nThis patch adds support for EHCI compliant USB Host Controller\npresent in MSM chips. This Controller uses an HSIC PHY which\ncommunicates with downstream devices using STROBE/DATA lines.\n\nHSIC is a supplement to USB 2.0 specification and is preferred\nfor chip-to-chip interconnect (having maximum circuit length of\n10cm) as it removes the analog transceivers.\n\nChange-Id: Id54dcc802e606e0ff7dd31bc64671a797cd8bc09\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\nSigned-off-by: Manu Gautam \u003cmgautam@codeaurora.org\u003e\n" }, { "commit": "4b99172a1df8b1ad2b48343bead39685f294e680", "tree": "90acfd6620722181a3b3f5b90c26c7d076207fe0", "parents": [ "7a6e8d148f0e55c82cc9294c1d1978d613ba5e19" ], "author": { "name": "Nagamalleswararao Ganji", "email": "nganji@codeaurora.org", "time": "Fri Jan 28 13:24:34 2011 -0800" }, "committer": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Thu Oct 20 09:33:32 2011 +0530" }, "message": "msm_fb: display: CSC Matrix update support is added\n\nCSC Matrix update support is added for MDP4 VG pipes\nto convert Ycbcr -\u003e RGB format\n\nCRs-fixed: 313601\nChange-Id: Ib6fb8f2eab4b1e871a406a3a2d7274fcfdcdd9d1\nSigned-off-by: Nagamalleswararao Ganji \u003cnganji@codeaurora.org\u003e\n" }, { "commit": "fb8e3c1d0c97219d251f4a3b2d90c2daad3d79a5", "tree": "4c9c261780eccf28d86148ed1883d8ec0ca2a1f2", "parents": [ "a21ec56a1e1d13b1cc3a6f62a39c2be49c450747" ], "author": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Wed Oct 19 17:29:42 2011 -0700" }, "committer": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Wed Oct 19 17:29:42 2011 -0700" }, "message": "diag: Add support for APQ8064\n\nThis change will add DIAG support for new target APQ8064.\n\nChange-Id: Ic8d21dc39e42fc254f71ee62df8160641c8068f8\nSigned-off-by: Shalabh Jain \u003cshalabhj@codeaurora.org\u003e\n" }, { "commit": "17607d277ee963f86a4f60ad6c0de37af932605b", "tree": "e5bc85db0d659edaead95922bfd5ab36fb282937", "parents": [ "842868ef3dbb2cbd3d52c810ace73fb2a8006e7a" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Wed Oct 05 10:36:20 2011 -0700" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Tue Oct 18 09:22:12 2011 -0700" }, "message": "hwmon: pm8xxx-adc: Add PM8018 ADC Driver\n\nPM8921 and PM8018 have a common ADC module. Difference\u0027s\nare in the channel supported on individual PMIC\u0027s and\nin the MPP mapping to the ADC device.\nMPP configuration on PM8018 is not required. The MPP\nis directly connected to the AMUX pre-mux channel.\n\nChange-Id: I9aed3366f20e3985962119274d8b2865b7054a79\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "2f2e8a5391cbbd08a329ff5bdf19bde815ae5f11", "tree": "7f249c0810916db01968114bf1b285706019b82d", "parents": [ "870643d99a9beead353bdeafddcd190a11ec412b" ], "author": { "name": "Chaithanya Krishna Bacharaju", "email": "chaithan@codeaurora.org", "time": "Mon Oct 17 14:54:07 2011 +0530" }, "committer": { "name": "Chaithanya Krishna Bacharaju", "email": "chaithan@codeaurora.org", "time": "Tue Oct 18 08:38:02 2011 +0530" }, "message": "msm: audio: qdsp6v2: Add 4GV wb/nb support in mvs driver\n\nSupport for 4GV-wb mode and 4GV-nb mode in mvs driver\nand add support for min-max rate.\n\nChange-Id: Iacd33ecfbdf278eb59b3e662c725d21fb60e4ab3\nSigned-off-by: Chaithanya Krishna Bacharaju \u003cchaithan@codeaurora.org\u003e\n" }, { "commit": "d02d1db765e82e8728a3a478abfbf0d05e180e8f", "tree": "aa498cb18a8049430eb9e06fbf0084fe093f1549", "parents": [ "5863bbb7bd12625d2639f6eee2b7a81cb347c8d2", "d66c9d51b264b66f7130eb7f310f09fce4b37039" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Oct 17 03:47:33 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Oct 17 03:47:33 2011 -0700" }, "message": "Merge \"drivers: rtc-pm8xxx: Fix automatic wakeup of APPS due to RTC alarm.\" into msm-3.0" }, { "commit": "9d9cdc218cd4fe64cb94ba23fcfca394f2da4b5b", "tree": "1b2bf8c5c73677966010811b1e54281239f3cb24", "parents": [ "b65f532893c362c77afd8e4eec01847b9962318f" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Oct 10 17:17:07 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Oct 17 12:53:07 2011 +0530" }, "message": "msm: Add msm-ssbi devices for PM8058 on supported targets\n\nSupported targets are msm8660, msm7x30 and fsm9xxx\n\nChange-Id: I1d21b73ba67c6769441658e648c32204c72754d3\nAcked-by: Kaushik Sikdar \u003cksikdar@qualcomm.com\u003e\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "d66c9d51b264b66f7130eb7f310f09fce4b37039", "tree": "13dbf9d3b876b1b8031e85e8f83286ec009c1334", "parents": [ "58522b6c825ce37b9e27f8244c62c7e64e684eb6" ], "author": { "name": "Ashay Jaiswal", "email": "ashayj@codeaurora.org", "time": "Thu Oct 13 17:41:40 2011 +0530" }, "committer": { "name": "Ashay Jaiswal", "email": "ashayj@codeaurora.org", "time": "Mon Oct 17 11:08:37 2011 +0530" }, "message": "drivers: rtc-pm8xxx: Fix automatic wakeup of APPS due to RTC alarm.\n\nAlarm interrupt causes automatic wakeup even when the phone is in\npowerdown state.\n\nChange-Id: If3ae30304adba4f07284a3dc496956d67a1ae1b0\nSigned-off-by: Ashay Jaiswal \u003cashayj@codeaurora.org\u003e\n" }, { "commit": "61e816424bea2b9cd705750b06661a6635e6bbba", "tree": "2f682f928bd309772451d301ee2d08dff803c8bc", "parents": [ "b46f4157ba20f9d66c0cf9cf6d8e456a4934a9c3", "cffdff53548ba88cea099a653e104003225607f2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Oct 15 12:53:35 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Oct 15 12:53:35 2011 -0700" }, "message": "Merge \"Kbuild: Add ion header file\" into msm-3.0" }, { "commit": "cffdff53548ba88cea099a653e104003225607f2", "tree": "2cfcc607f2575c965d9b0b0753ce5f5b65bd60b0", "parents": [ "3ce4a81bc3dd15cbb371246ad0daa909346ff0bd" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Fri Sep 23 10:40:19 2011 -0700" }, "committer": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Sat Oct 15 11:56:54 2011 -0700" }, "message": "Kbuild: Add ion header file\n\nMake sure the header file for Ion gets exported to userspace.\nAlso make sure userspace can actually use the header.\n\nChange-Id: I44f436005a6a503811c85d4fb0f89264ba160571\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "2ea4f046c594d263397e928314cfee8079f43bac", "tree": "25700367d4d7ce6de504507ed22379a5db02a91b", "parents": [ "7e0f01680ab59dcbbcd6492d1d66cdfa7973a770", "3b46d001e2e4f4aecd2de96e0950dbebdf4f96a3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 14 23:04:38 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 14 23:04:38 2011 -0700" }, "message": "Merge \"msm: kgsl: Add idlestats sleep event notification\" into msm-3.0" }, { "commit": "e69add446bc5d1a9dc2a1c96b185e4f1d606d24e", "tree": "61ffe94fd166e1554063f91b5ec63e637b822eb5", "parents": [ "2630a1fc62258c0e1005278b99e73dbfa9c6f0c9", "0123d183c4e5edcbecf72ffbfeec0a89d2cdfb69" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 14 16:35:40 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 14 16:35:40 2011 -0700" }, "message": "Merge \"msm: kgsl: make kgsl msm_bus votes more readable\" into msm-3.0" }, { "commit": "3b46d001e2e4f4aecd2de96e0950dbebdf4f96a3", "tree": "a4d957cd22280a395984abc0110f417c7a67aef1", "parents": [ "76c5182cd20e8421fdfa75f92b4f153dcabea963" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Tue Oct 04 16:26:38 2011 -0600" }, "committer": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Thu Oct 13 15:57:20 2011 -0600" }, "message": "msm: kgsl: Add idlestats sleep event notification\n\nChange-Id: Ie632d3f44661575ad8c7b41f064eff5f3b068f62\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "0123d183c4e5edcbecf72ffbfeec0a89d2cdfb69", "tree": "9b5af401ae4713782a27da7379b4145dfb074adf", "parents": [ "76c5182cd20e8421fdfa75f92b4f153dcabea963" ], "author": { "name": "Suman Tatiraju", "email": "sumant@codeaurora.org", "time": "Fri Sep 30 14:59:06 2011 -0700" }, "committer": { "name": "Suman Tatiraju", "email": "sumant@codeaurora.org", "time": "Thu Oct 13 14:46:38 2011 -0700" }, "message": "msm: kgsl: make kgsl msm_bus votes more readable\n\nChange-Id: Ia8de770d0891a078d9b2dc16b8ce541a4820b003\nSigned-off-by: Suman Tatiraju \u003csumant@codeaurora.org\u003e\n" }, { "commit": "9b4a6be7c466f5462adc28ee9c66797113a8466e", "tree": "6ac712c62ddf0a1d00cf4221f7b91a669e24afc2", "parents": [ "18db86ad26d024e5224a53e443eea785fe4a0b2d" ], "author": { "name": "Pradeep Jilagam", "email": "pjilagam@codeaurora.org", "time": "Mon Oct 03 17:19:20 2011 +0530" }, "committer": { "name": "Pradeep Jilagam", "email": "pjilagam@codeaurora.org", "time": "Thu Oct 13 22:03:39 2011 +0530" }, "message": "msm: rotator: Add YV12 support in the Rotator\n\nAdded changes to support YV12 input format in the Rotator.\nOutput will be Pseudoplanar in this case.\n\nChange-Id: Ic77ad2b6a3aaa66ad923494fb6c96e07738d674b\nSigned-off-by: Pradeep Jilagam \u003cpjilagam@codeaurora.org\u003e\n" }, { "commit": "d7cb92f92909a0b920530a4eaa1e2337e583baaa", "tree": "43cb6399bc46a97e938b71957ab4fcd49c0ebc78", "parents": [ "6cebee06fa90a2478e6ad713ba53dad025ae3895", "69890aa09a70bf8c57c2d1f287b932343a85c8d5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Oct 12 19:55:56 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Oct 12 19:55:56 2011 -0700" }, "message": "Merge \"diag: Add UART support\" into msm-3.0" }, { "commit": "abcb6f740ef17dcf13979be828ab0d1435824d3a", "tree": "fce0bdbc4a25913368d4128b2bc525925357af8e", "parents": [ "29e31c3659ad0e0bf601026a7f8e1d7eacd97dbf" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Tue Oct 04 16:26:49 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:30 2011 -0700" }, "message": "gpu: ion: Add cache flushing APIs\n\nAdd ioctl to support flushing the caches of ion\nbuffers from userspace.\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "8994e39bcddda72463b94bdd64fe598c33d6c53d", "tree": "aae5ea0b81847e42532887353ff3bcda772afd51", "parents": [ "0a42d696b56d337b04cc3484d8ec9b702c3459aa" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Wed Sep 14 18:20:39 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:29 2011 -0700" }, "message": "leds-pm8xxx: Pass LED flags from board file\n\nInstead of hard coding the flag into led driver, pass it\nfrom board file.\nWhile at it, re-factor the code to separate led upstream\ncore data with board specific data.\n\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n\nConflicts:\n\n\tdrivers/mfd/pm8921-core.c\n" }, { "commit": "354120303af200a1515eca4869a4fe2ac558888c", "tree": "405ca86a3a1439ba006ee587de0eb98a89418b70", "parents": [ "2fee20e30bb5fa63e2c9d939584114224deb47e6" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Thu Sep 29 09:50:06 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:25 2011 -0700" }, "message": "gpu: ion: Add IS_CACHED macro\n\nAdd a proper IS_CACHED macro for detecting whether or not\nflags indicated a cached mapping.\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "69890aa09a70bf8c57c2d1f287b932343a85c8d5", "tree": "2ccd47d1d918e055167dce653a67b6f279522065", "parents": [ "550aa1ab4be6af8caab655a5eac88cbe07040ee7" ], "author": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Mon Oct 10 12:59:16 2011 -0700" }, "committer": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Mon Oct 10 13:21:41 2011 -0700" }, "message": "diag: Add UART support\n\nDIAG traffic has been supported over USB and SD card. This\nchange adds capability to route DIAG traffic over UART.\n\nChange-Id: I0d6732fcbb19950700218140d581b5759e676b74\nSigned-off-by: Shalabh Jain \u003cshalabhj@codeaurora.org\u003e\n" }, { "commit": "93d79ecd11a79a097a5c051438d9c3502902af6e", "tree": "47326b900e05c681370345c444278145ffd582a4", "parents": [ "738b458d5dddd549a422fb7b9052e2938d510694" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Wed Sep 21 16:52:16 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Thu Oct 06 09:27:56 2011 -0700" }, "message": "ks8851: Add GPIO configuration platform data\n\nAdd platform data for the KS8851 SPI Ethernet device to\nenable proper GPIO configuration for the reset and\ninterrupt pins.\n\nChange-Id: I79adae4628f38a2ca5bc17825258c41ab5e1623d\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "4acbdd5c375ec73e0fad73d9d62cc8afccfb2b48", "tree": "f9c81fc5a60fad15be9edcfac45f943afc6c26f5", "parents": [ "eb9e60dc8e78dd7a3bbf707c435da23b260aec9b" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Fri Sep 16 17:09:44 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Thu Oct 06 09:27:50 2011 -0700" }, "message": "mfd: pm8xxx-pwm: add two APIs\n\nThese new APIs allow a driver to specify its PWM period,\nand raw PWM values separately using chip specific\nparameters.\n\nChange-Id: I3e9860f30a50d4f3d9c556133761d51858d2a2e3\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "0f0242353fd07efb98738dcd883a6eca9305bb5e", "tree": "734d603bcfed8f9d10e28f78f4a414042b2b1d4a", "parents": [ "21ebadd5df60c627e36cd4d30c2cff43e0ba4024" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Oct 03 12:00:15 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:36:45 2011 -0700" }, "message": "power: pm8921-charger: config cold/hot threshold\n\nPmic 8921, has configurable hot and cold battery thresholds as\npercent of VREF_THERM. Provide means to configure these via\nplatform data.\n\nOne has to set the config values in the charger platform data defined\nin the board file.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "fad7235d01a1a8fbc3649529117eba2a86414726", "tree": "8c5fa8f1bcaca982f01814080878ea9e9775e692", "parents": [ "5ba505a1b2b85172f8b1d62db639894c8a0ab40e" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Sun Sep 25 23:06:05 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:35:51 2011 -0700" }, "message": "power: pm8921-bms: calculate real_fcc\n\nreal_fcc is the remaining capacity in the battery when the charger\ndriver indicates that the battery is fully charged. This value needs\nto be calculated when charging ends with a fully charged battery.\n\nThe userspace can read this value via module parameter and preserve it\nbetween restarts.\n\nThe real reason for calculating this is to indicate how much the battery\ncapacity has dropped w.r.t the profiled battery data use this deviation\nin calculations.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "767fdda6e12ab7810a910036b52fa3f330afef76", "tree": "0d5cab415de8952c6de04ae6ea32def059dd2db9", "parents": [ "c1824d5b833848cd1a01a3ca526a38da6a20a12c" ], "author": { "name": "Shubhraprakash Das", "email": "sadas@codeaurora.org", "time": "Mon Aug 15 15:49:45 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:34 2011 -0700" }, "message": "msm: kgsl: Introduce Iommu Code\n\nkgsl now supports the use of 2 types of MMU. One is\nthe GPU\u0027s internal MMU and the other is IOMMU. Both\nMMU cannot be active at the same time. The MMU type\ncan be selected at compile time via config option.\nA boot command line parameter can be used to override\nthe type of MMU selected at compile time.\n\nSigned-off-by: Shubhraprakash Das \u003csadas@codeaurora.org\u003e\n" }, { "commit": "77d106ea896f3c77515fb982e35c96d0861d8928", "tree": "42bd300a872239ec3dd2d7efe2b919fac4062b6d", "parents": [ "43e46a32dec07e5179fda7400b77b16c81b70d88" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Tue Sep 20 16:25:59 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:12 2011 -0700" }, "message": "hwmon: pm8921-adc: Add sysfs interface\n\n-Add sysfs interface to read PM8921 HK/XOADC\nand thermistor temperature measurements mapped\nthrough MPP\u0027s.\n-Move PM8921 ADC from directory /drivers/mfd to\n/drivers/hwmon for userspace clients to read ADC\nthrough hwmon.\n\nCRs-Fixed: 302365\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n\nConflicts:\n\n\tdrivers/mfd/Kconfig\n" }, { "commit": "0b9e51735ead59494b60b2040d197ab24e312698", "tree": "71b6cc0cac6b061e5b927f80ff75f26ab39419ab", "parents": [ "6066a843dcf6d3b6b9231c76aae3f82bc159367e" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Sep 29 18:54:13 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:13:56 2011 -0700" }, "message": "thermal: tsens: Add support for MDM9615\n\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "f9cfa8ebfab2152b111432003bc7b749de6341f9", "tree": "5f86a3e8c5507e94c820cab27ecd19b0702f8593", "parents": [ "133aa41ecc2ff8689f58857a71c19cf90fe035b6" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Fri Sep 23 14:29:11 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 09:50:33 2011 -0700" }, "message": "msm: remote_spinlock: Add support for hardware mutexes\n\nAdd support for hardware mutexes.\n\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "02eff13c45b19505ddba49911a089ef5f238ca25", "tree": "e4bd7a5411434a4a73bf5d97b277ee0d4b1c813c", "parents": [ "d98328ef478ee964aa9ac48c88a43356dc320404" ], "author": { "name": "Amit Blay", "email": "ablay@codeaurora.org", "time": "Wed Sep 21 16:46:24 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:21:35 2011 -0700" }, "message": "usb: otg: Add usb_hs_system_clk to OTG driver for MSM9615\n\nThis change add usb system clock support to OTG Driver.\nSystem clock is a 60MHZ input clock to the USB ChipIdea core.\nThis clock is required starting from MDM9615.\n\nThis change also removes the enforcement for using a phy_reset_clk\nfor reseting the PHY. Starting from MDM9615, PHY reset is not implemented.\nThe core is reset together with the PHY using \"usb_hs_clk\" signal.\n\nSigned-off-by: Amit Blay \u003cablay@codeaurora.org\u003e\n" }, { "commit": "d7e02d4d604fd96b16f63693bf1da23b51bed6a5", "tree": "cf11692c850db3f4025def4d771790ef0a3bf6d9", "parents": [ "e0b11453c13df0fd79848fa05b1a95b6479f2ca2" ], "author": { "name": "Sachin Shah", "email": "sachins@codeaurora.org", "time": "Mon Sep 12 20:31:02 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:21:33 2011 -0700" }, "message": "tzcom: Implement abort and cleanup of driver\n\nAdd a new IOCTL call to the driver to properly\nabort all threads blocked on wait queues. Updated\nrelease call for proper cleanup.\n\nCRs-fixed: 303637, 304152\nSigned-off-by: Sachin Shah \u003csachins@codeaurora.org\u003e\n" } ], "next": "1097519e8b6a0404f45a1cb60b2101fa875faebd" }