)]}' { "log": [ { "commit": "7cdbfaff1f72ad955210fc243c980f68fc29bad1", "tree": "12e5c94cea7778b885cab6770c948e44a24d2e98", "parents": [ "5fafd3ce289590ca749004cc061975782b684902" ], "author": { "name": "Mona Hossain", "email": "mhossain@codeaurora.org", "time": "Thu Mar 15 18:56:10 2012 -0700" }, "committer": { "name": "Mona Hossain", "email": "mhossain@codeaurora.org", "time": "Fri Mar 16 05:32:52 2012 -0700" }, "message": "qseecom: Load and unload app on open/close\n\nThis fix is intended when using QSEOS_VERSION_13.\nTargets that have not moved to latest QSEE, will run into\na failure when the qseecom daemon is run. qseecom daemon\nopens the qseecom device and registers the listeners.\n\nIn the old QSEE version 13, the app itself responds to these\nrequest for registering the listeners. So the app needs to have\nloaded prior to issuing the register listeners request.\n\nChange-Id: Ic1756aac2b8d8cc22b9b630053e77ba7f7a49c91\nSigned-off-by: Mona Hossain \u003cmhossain@codeaurora.org\u003e\n" }, { "commit": "5fafd3ce289590ca749004cc061975782b684902", "tree": "268467040f4b02d1f8f83752b2226a98dab86480", "parents": [ "b27ac2ec32d96af0dee90f2b8136e359b32ddb99", "08166fc6f488afef37101a63881ec01613971952" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 14 12:14:20 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 14 12:14:20 2012 -0700" }, "message": "Merge \"net/wireless: Support to disable CCK rate for management frame\" into msm-3.0" }, { "commit": "b27ac2ec32d96af0dee90f2b8136e359b32ddb99", "tree": "30f65f896c2f081e75ddc9e87ca379678566ee72", "parents": [ "f15a5d72151f510fee354f4e426079d9a6cad4c1", "263467dc0b1184e562ff86e4069df76283a80d2d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 14 12:14:20 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 14 12:14:20 2012 -0700" }, "message": "Merge \"msm: Change the permission for pwrnap, policy, modem_wait sys entries\" into msm-3.0" }, { "commit": "f15a5d72151f510fee354f4e426079d9a6cad4c1", "tree": "a08f8a830abac4101dad8207769afb202bc52e9a", "parents": [ "6b302e17537c6f32a7115011540aebaddfacb8d9", "07552e154133ffc4e7c0691933fd48ff89095038" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 14 06:07:23 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 14 06:07:23 2012 -0700" }, "message": "Merge \"msm: Add support for cache error reporting\" into msm-3.0" }, { "commit": "263467dc0b1184e562ff86e4069df76283a80d2d", "tree": "340890c4c0f6c73cf7dee692732521f083907846", "parents": [ "6b302e17537c6f32a7115011540aebaddfacb8d9" ], "author": { "name": "Praveena Pachipulusu", "email": "pveena@codeaurora.org", "time": "Thu Dec 22 18:07:16 2011 +0530" }, "committer": { "name": "Praveena Pachipulusu", "email": "pveena@codeaurora.org", "time": "Wed Mar 14 16:44:58 2012 +0530" }, "message": "msm: Change the permission for pwrnap, policy, modem_wait sys entries\n\nSysfs files are not world writable. Allowing only\nroot to write to sysfs files to keep non-privileged\nprocess from change the power policy.\n\nCRs-Fixed: 327239\nChange-Id: Ibe44e888c28f854996c8a4391d99fdb7e0edd602\nSigned-off-by: Praveena Pachipulusu \u003cpveena@codeaurora.org\u003e\n" }, { "commit": "6b302e17537c6f32a7115011540aebaddfacb8d9", "tree": "665186919d28ad9fa3d79513b932a4af84df4378", "parents": [ "59dfafb89d22047fa1c8a1a3cd100d4c14e55c47", "56e6052dde12b86ae07bd4269682729377f549a7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 14 02:38:42 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 14 02:38:42 2012 -0700" }, "message": "Merge changes Idc72ee81,Ibe2519ff,I2982b9f4,Icb2a8c32 into msm-3.0\n\n* changes:\n USB: android: Add OTG descriptor to configuration\n USB: OTG: msm: Add support for SRP and HNP\n USB: EHCI: use otg_start_hnp() to intiate HNP in ehci-hub.c\n USB: gadget: Add OTG support for ci13xxx_udc\n" }, { "commit": "59dfafb89d22047fa1c8a1a3cd100d4c14e55c47", "tree": "e4a30557f0ea5454b516b6d6b555d3c62c9a5128", "parents": [ "0fc7fd106027dc78570aac9864331589c0fbf3fc", "47239d5e8239ac7eb2292682924f273c700d8016" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 14 02:38:42 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 14 02:38:42 2012 -0700" }, "message": "Merge changes Idf9aeee3,Ibee2efde,I41dd39d2,I84c3ca17,Ie5dd4593 into msm-3.0\n\n* changes:\n msm: msm_xo: Remove PXO/CXO control from buffer voting\n msm: xo: Initialize debugfs from initcall\n msm: clock: Support clk_prepare/unprepare()\n msm: clock: Move XO voting to RPM clock driver\n msm: clock-9615: Remove dummy clock entries for ebi1\n" }, { "commit": "0fc7fd106027dc78570aac9864331589c0fbf3fc", "tree": "dc7f091212352b4a57a96fd310f84c22bc869fdf", "parents": [ "d0295d7e1af987e340368427f76024dc7e686471", "9e07aa9b1b4e25cadd5c15f1994ff1cfd51600d0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 14 02:38:42 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 14 02:38:42 2012 -0700" }, "message": "Merge \"msm: apq8064: Remove GPIO configurations related to audio auxpcm\" into msm-3.0" }, { "commit": "d0295d7e1af987e340368427f76024dc7e686471", "tree": "bae0bf92b6d428e34972de21e767610304f3f259", "parents": [ "8a22ce28dc0186ca61e4548fda82d79babf99a2d", "9da392dc3c8c1632e26981b572a7fb4553cdb2d6" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 14 02:38:42 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 14 02:38:42 2012 -0700" }, "message": "Merge changes I5665f7b2,I6419b7ec,I15ea0e8e into msm-3.0\n\n* changes:\n power: pm8921-charger: do not report usb present while in otg\n power: pm8921-charger: reset chg failed bit regularly\n power: pm8921-bms: add delta param to bms\n" }, { "commit": "8a22ce28dc0186ca61e4548fda82d79babf99a2d", "tree": "61bb1024443563807c7fb18182e9cc9df031db2c", "parents": [ "1f0f0d6b6c4c5db55d22214ed4d92bfa58271f41", "4c996bec4b968521616085f8f3941a52cc199fde" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 14 02:38:41 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 14 02:38:42 2012 -0700" }, "message": "Merge \"msm: board-qrd7627a: Add PM platform data for 8625 EVB\" into msm-3.0" }, { "commit": "1f0f0d6b6c4c5db55d22214ed4d92bfa58271f41", "tree": "7c774eb7f40e6d7ab62cdd8aa7e935c912d66f68", "parents": [ "e29055262ac4b72fceec257dfa340e7a28f4dabe", "80478d03096d025cdd267e79ce20b5cce46b9b1d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 14 02:38:41 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 14 02:38:42 2012 -0700" }, "message": "Merge \"defconfig: msm7627a: Increase vmalloc reserve to 200M\" into msm-3.0" }, { "commit": "08166fc6f488afef37101a63881ec01613971952", "tree": "b52e0cd9e58efab9bd47f3054bbd1b444595a8d2", "parents": [ "bd404367576fa00bde02187899ba3824fb8a48f2" ], "author": { "name": "Sunil Dutt Undekari", "email": "duttus@codeaurora.org", "time": "Mon Mar 05 21:01:23 2012 +0530" }, "committer": { "name": "Sunil Dutt Undekari", "email": "duttus@codeaurora.org", "time": "Wed Mar 14 14:23:14 2012 +0530" }, "message": "net/wireless: Support to disable CCK rate for management frame\n\nProvision to distinguish the P2P scan and the normal scan\nwith no_cck flag and thus disable the 11b rates for\np2p scan.\n\nChange-Id: Ia4073a5f926c6ac97dffdee99f54ba53535fea85\nSigned-off-by: Sunil Dutt Undekari\u003cduttus@codeaurora.org\u003e\n" }, { "commit": "e29055262ac4b72fceec257dfa340e7a28f4dabe", "tree": "b74cb0e647bc51b898096274949a555080323948", "parents": [ "f2b497fec2033dfbb8fb0b86d361b10c6cd581ac", "8ebb22894909438ea1ae8f7b2b5ca819e4781109" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 14 00:34:42 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 14 00:34:42 2012 -0700" }, "message": "Merge \"msm: kgsl: Add graphics support for msm8930\" into msm-3.0" }, { "commit": "f2b497fec2033dfbb8fb0b86d361b10c6cd581ac", "tree": "13fb71e4d789c8b55d29d6629e38ce3aaf900cbe", "parents": [ "e8bb2ed3c9ce1c25a0ab3646bfe9da005eff9252", "c85b8ade5cb46b576eec2e5d667460d8d40cb207" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 14 00:34:42 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 14 00:34:42 2012 -0700" }, "message": "Merge \"msm-camera: enhance the camsenser query structure\" into msm-3.0" }, { "commit": "e8bb2ed3c9ce1c25a0ab3646bfe9da005eff9252", "tree": "3d6f148724777132721e71a487ee8069853489f7", "parents": [ "ed396a57e9de8bf1d6859478fde5c28714a3cf4f", "4ea7f1a00a4d7ccbf62297372716f71914c19da1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 14 00:34:42 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 14 00:34:42 2012 -0700" }, "message": "Merge \"apq8064: MBHC single button detection not working\" into msm-3.0" }, { "commit": "ed396a57e9de8bf1d6859478fde5c28714a3cf4f", "tree": "1798ca58631e0d76e55e54f91a97611c03f56d59", "parents": [ "524e336d9430bf5848748209924e91e7738998e7", "df6e62f285e5a044778415e65ebbe7cf0cb000b3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 13 22:03:21 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 13 22:03:22 2012 -0700" }, "message": "Merge \"Revert \"msm: board-msm7x27a: Huge idle timeout for 3D device in msm8625\"\" into msm-3.0" }, { "commit": "524e336d9430bf5848748209924e91e7738998e7", "tree": "aa03b800cb6e16a5f7a33ca235e226285f716f6e", "parents": [ "cf640c58385807c641de71ffd98b4ce9fed71b48", "94ad7e271f0744963ca418aa774b106cbfb6b759" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 13 22:03:21 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 13 22:03:22 2012 -0700" }, "message": "Merge \"ASOC: msm: Modify debug messages and conditional checks\" into msm-3.0" }, { "commit": "cf640c58385807c641de71ffd98b4ce9fed71b48", "tree": "33e111d56ce0020b666626ec819eb29da96bfe7f", "parents": [ "92c2cc05fc9d6a24c0eaa885ad038f934ed8ecee", "b8409d65e32c3296c059e8590f85376946da86ef" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 13 22:03:21 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 13 22:03:22 2012 -0700" }, "message": "Merge \"defconfig: 8660: Enable qseecom driver\" into msm-3.0" }, { "commit": "92c2cc05fc9d6a24c0eaa885ad038f934ed8ecee", "tree": "15254ed19c11e1c3b79cabcf912f86948b0b6755", "parents": [ "346646eee10255af4c14949336705b07b2d1d325", "e5c9f6e5f9fe550e228cc5b34dbde086b151a613" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 13 22:03:21 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 13 22:03:22 2012 -0700" }, "message": "Merge \"msm_fb: display: initialize is_flag variable\" into msm-3.0" }, { "commit": "346646eee10255af4c14949336705b07b2d1d325", "tree": "c94f5bb98df6ecbd4b128ef15982f3283d12d8d9", "parents": [ "ab143f33d67607f6886a037b411521d974d8325e", "7d6d27366a0581eb99bafd1563b6f7551d0c50b1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 13 22:03:21 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 13 22:03:22 2012 -0700" }, "message": "Merge \"thermal: Fix hotplug race condition leading to memory corruption.\" into msm-3.0" }, { "commit": "4c996bec4b968521616085f8f3941a52cc199fde", "tree": "721b09061df64d98da933ee7465dd06777773ad3", "parents": [ "ab143f33d67607f6886a037b411521d974d8325e" ], "author": { "name": "Murali Nalajala", "email": "mnalajal@codeaurora.org", "time": "Mon Mar 12 17:05:41 2012 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 13 21:13:16 2012 -0600" }, "message": "msm: board-qrd7627a: Add PM platform data for 8625 EVB\n\nSet power driver platform data for 8625 EVB board.\n\nChange-Id: I7158ad1770b4fc57fb7cce1a7d294be2528ae408\nSigned-off-by: Murali Nalajala \u003cmnalajal@codeaurora.org\u003e\n" }, { "commit": "ab143f33d67607f6886a037b411521d974d8325e", "tree": "897e7f5caffba3a637b752b5637bba6d0f89199f", "parents": [ "4af3fd587e6eb15dfa063edcbe2892d3f06373b7", "4ea731c40e5bf08dcb2f5f841db52d926d6ec548" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 13 19:53:44 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 13 19:53:45 2012 -0700" }, "message": "Merge \"mmc: msm_sdcc: Power down slots after reboot\" into msm-3.0" }, { "commit": "4af3fd587e6eb15dfa063edcbe2892d3f06373b7", "tree": "ad69a7533d2c78775ad48174b7b33c90c8939721", "parents": [ "84613e060c92842ad9b4e4cd05e3b926ebba6d8d", "c6f7867e7ffc7e0cdfde39ec0cb05a3e4278bdf5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 13 19:53:44 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 13 19:53:45 2012 -0700" }, "message": "Merge \"msm-camera: Add 8MP and 1MP sensor support\" into msm-3.0" }, { "commit": "84613e060c92842ad9b4e4cd05e3b926ebba6d8d", "tree": "c00e171979ef6ee8f2c9bc324df8066958f8dca9", "parents": [ "3ddef0967cb9926b7c49bebbd1cc2e9d6fb4efc1", "9d76704c8dac8f9e0794834cc4d62c17fd9cdf63" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 13 19:53:44 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 13 19:53:45 2012 -0700" }, "message": "Merge \"msm_fb: display: clean dsi fifo during dsi_off\" into msm-3.0" }, { "commit": "3ddef0967cb9926b7c49bebbd1cc2e9d6fb4efc1", "tree": "9519379e1cdca945123e359528b57783d4ef2dd8", "parents": [ "5a6683a7d8ed24e97a787c0a2fa6eec83b781fe2", "1d4731ee979106d1f661418bf0f5544634d26b8e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 13 19:53:44 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 13 19:53:45 2012 -0700" }, "message": "Merge \"msm_serial_hs_lite: Save UART registers if stuck\" into msm-3.0" }, { "commit": "5a6683a7d8ed24e97a787c0a2fa6eec83b781fe2", "tree": "0e8dd11f324dc254063ebf2c6d8587e2711d9f87", "parents": [ "33a6a9a9600693b34ded1c5c99a4bd7c6b170aea", "e4b9eb117792909c975889db981140d050833b83" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 13 19:53:44 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 13 19:53:45 2012 -0700" }, "message": "Merge \"msm: spm: Update PMIC DLY values in SPM\" into msm-3.0" }, { "commit": "33a6a9a9600693b34ded1c5c99a4bd7c6b170aea", "tree": "079da600b08f27f8c20715f856a2279fda814700", "parents": [ "aad45a9b56cacb4e125e96c6aad62626597930f6", "65e7225e94308fdf103c90cbeb15359755fbb6c0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 13 19:53:44 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 13 19:53:45 2012 -0700" }, "message": "Merge \"defconfig: msm7630: Add support for 1GB RAM\" into msm-3.0" }, { "commit": "47239d5e8239ac7eb2292682924f273c700d8016", "tree": "fa0d8d79faa6f92d7a5f3d307ae1da5b8e4d921e", "parents": [ "a70c543d39b5abc8e2aacc54d40eb5a88b415f46" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Thu Jan 26 14:38:40 2012 -0800" }, "committer": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Tue Mar 13 18:05:21 2012 -0700" }, "message": "msm: msm_xo: Remove PXO/CXO control from buffer voting\n\nPXO and CXO are separate resources that should only be controlled\nvia the RPM clock driver. Now that all users of the CXO/PXO\nresources have moved to using the RPM clock driver drop support\nfrom msm_xo.\n\nChange-Id: Idf9aeee3b2da23450d88a8823d17d9d805004d47\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "a70c543d39b5abc8e2aacc54d40eb5a88b415f46", "tree": "bfd9533ca6e4b424d2c8f2593a674663b05fe466", "parents": [ "3bbf3462ee55a3a0ad48c50214f6263401fc9265" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Fri Feb 10 14:31:45 2012 -0800" }, "committer": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Tue Mar 13 18:05:21 2012 -0700" }, "message": "msm: xo: Initialize debugfs from initcall\n\nIf msm xo is compiled in but msm_xo_init() hasn\u0027t been called we\nstill initialize the debugfs node in a late initcall. Doing so\nexposes a file that when cated will Oops because the lists for\nthe xo voters aren\u0027t initialized. Move the debugfs initialization\nto the init function so that the node is not created unless the\nxo driver is initialized.\n\nChange-Id: Ibee2efde5453af065b177001572d3c8c1c5912ed\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "3bbf3462ee55a3a0ad48c50214f6263401fc9265", "tree": "7b2d69315e7fbf3641a4ecbb367bc2f598a71936", "parents": [ "72a803516eeb3c43b4dd80b3c54d95f632736527" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Thu Jan 12 00:19:23 2012 -0800" }, "committer": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Tue Mar 13 18:05:21 2012 -0700" }, "message": "msm: clock: Support clk_prepare/unprepare()\n\nFill in the boiler plate prepare()/unprepare() code. Add a\nprepare count and a prepare lock to protect the prepare/unprepare\npaths. Also handle the parent/child relationship similarly to how\nenable/disable is done.\n\nIn particular, WARN() whenever a driver calls clk_enable() before\ncalling clk_prepare() and whenever a driver calls clk_unprepare()\nbefore calling clk_disable(). This should catch a few bugs even\nthough it\u0027s technically not SMP safe if an enable call is racing\nwith an unprepare call for example.\n\nWe also mark PLLs and XOs as already warned since those are\nmostly internal clocks that driver authors aren\u0027t aware of. The\nmarkings will be removed when the local clock driver is updated\nto handle prepare/unprepare in another patch.\n\nChange-Id: I41dd39d27a279f3477c6e1cef292ac5308d65243\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "72a803516eeb3c43b4dd80b3c54d95f632736527", "tree": "ed99a7a2df4d977c9e4a00db094155af87322c33", "parents": [ "4bc7c9b78c8a054789b68c8655b6e7936beadf15" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Thu Jan 26 15:57:38 2012 -0800" }, "committer": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Tue Mar 13 18:05:21 2012 -0700" }, "message": "msm: clock: Move XO voting to RPM clock driver\n\nReplace the XO voting code in the clock drivers with RPM clocks\nfor the respective XOs. This is more in line with how the clocks\nare implemented on the RPM side (in the clock driver) and also\nallows us finer grained control over when CXO/PXO is enabled in\nthe active set (see 9615).\n\nChange-Id: I84c3ca17ef3b3131b1cf45331349a1800bc35c54\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "4bc7c9b78c8a054789b68c8655b6e7936beadf15", "tree": "adaedb4da604d90b0bb1a88f7d56b3d9931ac754", "parents": [ "aad45a9b56cacb4e125e96c6aad62626597930f6" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Wed Mar 07 16:06:21 2012 -0800" }, "committer": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Tue Mar 13 18:05:21 2012 -0700" }, "message": "msm: clock-9615: Remove dummy clock entries for ebi1\n\nThe adm bus voting clock was stubbed out until the RPM bus driver\nwas in place, otherwise the only request for bus bandwidth would\nbe done by the adm driver and ebi1 would drop to 0 when adm\nwasn\u0027t in use. Now that the RPM driver is in place we can safely\nremove these entries.\n\nChange-Id: Ie5dd4593b7ccc22bfa8ed453c2f2eb629135e1b6\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "aad45a9b56cacb4e125e96c6aad62626597930f6", "tree": "f63c225085cec42c907dea6f943fe4cf56664b60", "parents": [ "e7afb398f14427f97e8f0aff85e14bd51a3e99d6", "daf36d132af521529d00013208d617e0f64d097d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 13 17:34:53 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 13 17:34:54 2012 -0700" }, "message": "Merge \"msm: smd_tty: Add check for platform device id\" into msm-3.0" }, { "commit": "e7afb398f14427f97e8f0aff85e14bd51a3e99d6", "tree": "d02afc3ac9f18c15475fd0d5560304e281e5ec1b", "parents": [ "42a884baedf1855dfc135b7545c7f40db11c3c24", "7052e132e82dc0c2e1bd19a140ac2a0c5fb193b8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 13 17:34:53 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 13 17:34:54 2012 -0700" }, "message": "Merge \"msm: display: Align framebuffer resolution to 32 pixels.\" into msm-3.0" }, { "commit": "42a884baedf1855dfc135b7545c7f40db11c3c24", "tree": "e34c1a4a21163b475d05c99c8d52ce9b0801e773", "parents": [ "2688aa4a76306bcf18f32aa051610eb0d5278c66", "2c74a1352d46b616ab75c8cbbb3f415b1bf15c9a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 13 17:34:53 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 13 17:34:54 2012 -0700" }, "message": "Merge \"msm: board-qrd7627a: Update power saving parameters for mxt device\" into msm-3.0" }, { "commit": "2688aa4a76306bcf18f32aa051610eb0d5278c66", "tree": "1a9517dbb045d42c5546f9d65c768e14e69954e9", "parents": [ "42824223154c888ab076eed0d106c8dfea5efdd3", "ed3593ce56f4c023f9ffaa1a287a442563c4688f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 13 17:34:53 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 13 17:34:54 2012 -0700" }, "message": "Merge \"msm: display: Set DSI Video Chimei panel as default for 8064 v1.1 Liquid\" into msm-3.0" }, { "commit": "42824223154c888ab076eed0d106c8dfea5efdd3", "tree": "9d24edde5a7b926cf66734c1d32671a6319631ed", "parents": [ "81969024717f68c052a5ef0b4207e58194244829", "0473d05091f0df4d85e4f6a162f55a9af8d3307b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 13 17:34:53 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 13 17:34:54 2012 -0700" }, "message": "Merge \"msm_fb: Clean up of frame buffer 4KB alignment changes\" into msm-3.0" }, { "commit": "81969024717f68c052a5ef0b4207e58194244829", "tree": "c6f82a0a4254538251e1ad8ea769bc3f0a0d87c7", "parents": [ "7c71edf262b2c9174c5f6937d8d2c54ec8be1e9c", "91e0ebdd1e9628c88218f30d045113f0e37d88eb" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 13 17:34:53 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 13 17:34:54 2012 -0700" }, "message": "Merge \"msm: smd: add RPM processor id and edges\" into msm-3.0" }, { "commit": "7c71edf262b2c9174c5f6937d8d2c54ec8be1e9c", "tree": "4880ddc7e1fa037898dd92616582b793fc7370e9", "parents": [ "94c997966984df7428dd17c64087e0125d89abb4", "57701f7109efafa8d38b69808e307fbda2e90224" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 13 17:34:53 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 13 17:34:54 2012 -0700" }, "message": "Merge \"msm: camera: Fix camera devices disable sequence\" into msm-3.0" }, { "commit": "94c997966984df7428dd17c64087e0125d89abb4", "tree": "b3ab82bbd981ac5b10579490333462cdcc8791a2", "parents": [ "a1bc0e4d03565a3b895a5ae6f79108a02a1ce45b", "8ee084e51bd0aa0a931d0f7733d898eab1b76d3a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 13 17:34:53 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 13 17:34:54 2012 -0700" }, "message": "Merge \"msm: board-msm7627a: Add PM platform data for 8625 SURF\" into msm-3.0" }, { "commit": "9da392dc3c8c1632e26981b572a7fb4553cdb2d6", "tree": "1fe08a4afdf13da5180c62ac8d863de83ff0f752", "parents": [ "e451f3463b1f57384275bcb9a6867d49759fa81c" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Feb 22 18:59:57 2012 -0800" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Mar 13 16:39:13 2012 -0700" }, "message": "power: pm8921-charger: do not report usb present while in otg\n\nWhen a usb slave device is being powered by the pmic, the charger\nsees a valid voltage on the usb_in line incorrectly reporting that\na valid charger source is present.\n\nIt is expected that when a slave device is present the charger is\nasked to not draw any current from usb. Use this setting as a flag\nto indicate if a valid charger source is present.\n\nAlso clean up the implementation by splitting the get property function\nin to two - one for usb charger and other for the dc charger.\n\nCRs-Fixed: 339000\nChange-Id: I5665f7b2364c61a6f618f4725facf32b209e0249\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "e451f3463b1f57384275bcb9a6867d49759fa81c", "tree": "4660e35d9aa544b871572cb2acd7eb9ac95b76e6", "parents": [ "acca418a196d1d4b17f27bb49c8db9ebbc460cf6" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Feb 23 16:39:42 2012 -0800" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Mar 13 16:39:13 2012 -0700" }, "message": "power: pm8921-charger: reset chg failed bit regularly\n\nThe charger was observed to freeze for unknown reasons. Clear the failed\nbit upon insertion/removal of usb. Also clear that bit in eoc check worker\nand the heartbeat worker.\n\nChange-Id: I6419b7ecbfc4d9b73537285357be1e810efa0411\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "acca418a196d1d4b17f27bb49c8db9ebbc460cf6", "tree": "f7ac8117ad10b5e1e07f0b455546ebf84a387ced", "parents": [ "c9857ca398776beaba55ebe9be64f4019760d645" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Feb 07 12:52:19 2012 -0800" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Mar 13 16:38:08 2012 -0700" }, "message": "power: pm8921-bms: add delta param to bms\n\nThe master band gap (MBG) drifts when usb is inserted - a known\nproblem with the hardware. This drifts in the MBG cause errors\nin adc readings - in particular the open circuit voltage of the\nbattery.\n\nUse the driver to measure how much the 0.625V channel drifts when\na usb is inserted and compensate adc readings using that delta.\n\nAlso changed the unsigned nature of the calculations done for\nadjusting the battery voltage, it was found doing incorrect\nadjustments at very low battery voltages.\n\nChange-Id: I15ea0e8ec0cf7ddd679fda1a7fc864f1ba1b46c2\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "4ea7f1a00a4d7ccbf62297372716f71914c19da1", "tree": "3c695c6c5a7b76aa6c2f5ae003743fc2f29b5187", "parents": [ "54a02757a593b00fd3eea12fd3a9f766045601f6" ], "author": { "name": "Swaminathan Sathappan", "email": "Swami@codeaurora.org", "time": "Wed Feb 29 12:55:55 2012 -0800" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 13 16:34:42 2012 -0600" }, "message": "apq8064: MBHC single button detection not working\n\nModify MBHC Button values to make MBHC button detect work\n\nChange-Id: I6eeefed49124c876946677b02902fa1fd675a40a\nSigned-off-by: Swaminathan Sathappan \u003cSwami@codeaurora.org\u003e\n" }, { "commit": "b8409d65e32c3296c059e8590f85376946da86ef", "tree": "c378f9f7b29648d1ca80c8eafcd534e9e5c8f4fb", "parents": [ "54a02757a593b00fd3eea12fd3a9f766045601f6" ], "author": { "name": "Mona Hossain", "email": "mhossain@codeaurora.org", "time": "Fri Mar 02 15:32:10 2012 -0800" }, "committer": { "name": "Riaz Rahaman", "email": "riazr@codeaurora.org", "time": "Tue Mar 13 13:00:02 2012 -0700" }, "message": "defconfig: 8660: Enable qseecom driver\n\nreplace tzcom driver with qseecom\n\nChange-Id: I38b28787b7c820fa2d1997d4f7e2f06e991b1927\nSigned-off-by: Mona Hossain \u003cmhossain@codeaurora.org\u003e\n" }, { "commit": "a1bc0e4d03565a3b895a5ae6f79108a02a1ce45b", "tree": "51ed321759125d8b588fb0c6b8257b2bb194ecc6", "parents": [ "54a02757a593b00fd3eea12fd3a9f766045601f6" ], "author": { "name": "Ramesh Masavarapu", "email": "rameshm@codeaurora.org", "time": "Mon Mar 05 07:42:48 2012 -0800" }, "committer": { "name": "Ramesh Masavarapu", "email": "rameshm@codeaurora.org", "time": "Tue Mar 13 11:27:29 2012 -0700" }, "message": "qseecom: Add new dfab clock definition to the driver.\n\nCurrently, the qseecom driver uses the dfab clock definition\nof scm driver. The new definition fixes this problem.\nThe driver should for NULL before setting the clock rate.\n\nChange-Id: Iad653ee855b834a475b43502d36e4673c4bd03a3\nSigned-off-by: Ramesh Masavarapu \u003crameshm@codeaurora.org\u003e\n" }, { "commit": "e4b9eb117792909c975889db981140d050833b83", "tree": "b0f7d1c44f430cad42204aba54c3994fa99c0c61", "parents": [ "632752ab47cd287287a0a6382b802911c3b64225" ], "author": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Tue Feb 28 19:39:58 2012 -0700" }, "committer": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Tue Mar 13 08:38:35 2012 -0600" }, "message": "msm: spm: Update PMIC DLY values in SPM\n\nIn a rare possibility, PMIC8921 could get a command but may delay in\nsetting the voltage during power collapse restore and in such a case,\nthe Krait SPM would wait for 303 us and may power on the Krait assuming\nthat the PMIC voltage has been set. If the voltage is not stabilized by\nthen, Krait could possibly end up in a unresponsive state. Increase the\ndelay in SPM sequence in waiting for the voltage to stabilize. This\npatch sets the delay to 607 us.\n\nCRs-fixed: 340842\nChange-Id: I7bd9fe59f3fd1f46490347284e1989f6b3bc31eb\nSigned-off-by: Praveen Chidambaram \u003cpchidamb@codeaurora.org\u003e\n" }, { "commit": "80478d03096d025cdd267e79ce20b5cce46b9b1d", "tree": "c60de9768caa217ac846cebae4b58c10410ef042", "parents": [ "54a02757a593b00fd3eea12fd3a9f766045601f6" ], "author": { "name": "Taniya Das", "email": "tdas@codeaurora.org", "time": "Mon Mar 12 16:29:24 2012 +0530" }, "committer": { "name": "Taniya Das", "email": "tdas@codeaurora.org", "time": "Tue Mar 13 17:37:53 2012 +0530" }, "message": "defconfig: msm7627a: Increase vmalloc reserve to 200M\n\nvmalloc reserve is increased to 200M, as with 1GB DDR the vmalloc\nsize is decreased, so now the vmalloc size equals to 512MB RAM device.\n\nChange-Id: Ic864990d68131dd5fe3e7142bceaf6b71f60cb23\nSigned-off-by: Taniya Das \u003ctdas@codeaurora.org\u003e\n" }, { "commit": "2c74a1352d46b616ab75c8cbbb3f415b1bf15c9a", "tree": "6e56078d3c370471ac1f766980cd6e2e100a6f46", "parents": [ "54a02757a593b00fd3eea12fd3a9f766045601f6" ], "author": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Mon Mar 05 15:50:40 2012 +0530" }, "committer": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Tue Mar 13 16:29:21 2012 +0530" }, "message": "msm: board-qrd7627a: Update power saving parameters for mxt device\n\nUpdate mxt touch controller configuration to optimize power savings\nin active and idle modes.\n\nCRs-fixed: 340114\nChange-Id: I29022638ae5a8f6b57d6c11b617d3e12b397d7bd\nSigned-off-by: Mohan Pallaka \u003cmpallaka@codeaurora.org\u003e\n" }, { "commit": "c85b8ade5cb46b576eec2e5d667460d8d40cb207", "tree": "5ff8f45a9722a862356b4c6b25bf46b0635eb618", "parents": [ "54a02757a593b00fd3eea12fd3a9f766045601f6" ], "author": { "name": "Mingcheng Zhu", "email": "mingchen@codeaurora.org", "time": "Thu Mar 08 17:47:17 2012 -0800" }, "committer": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Tue Mar 13 01:43:53 2012 -0700" }, "message": "msm-camera: enhance the camsenser query structure\n\nMore information needs to pass to userspace.\n\nChange-Id: Ia7c5a5cf9a7f48e1c6167fd3ca2ddd56fbdbf8c9\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "65e7225e94308fdf103c90cbeb15359755fbb6c0", "tree": "a51c78cb06f68ad3908b11e3b27665907de4b9d6", "parents": [ "54a02757a593b00fd3eea12fd3a9f766045601f6" ], "author": { "name": "Pankaj Kumar", "email": "pakuma@codeaurora.org", "time": "Tue Mar 13 12:08:03 2012 +0530" }, "committer": { "name": "Pankaj Kumar", "email": "pakuma@codeaurora.org", "time": "Tue Mar 13 12:13:10 2012 +0530" }, "message": "defconfig: msm7630: Add support for 1GB RAM\n\nEnable Highmem and increase the vmalloc reserve area to 416MB, to\nsupport 1GB RAM on 7630 device. Increase in vmalloc reserve area\nis equal to 512MB RAM device.\n\nCRs-Fixed: 341201\nChange-Id: Ibe2e777c04f06838378285f500bab4a166f66505\nSigned-off-by: Pankaj Kumar \u003cpakuma@codeaurora.org\u003e\n" }, { "commit": "56e6052dde12b86ae07bd4269682729377f549a7", "tree": "c1d33243851e1f983cd33caae538cc1b50a3655b", "parents": [ "a3152031da5d2dbce83bd0ab8b56b31108ad6255" ], "author": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Thu Feb 16 15:40:16 2012 +0530" }, "committer": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Tue Mar 13 11:40:01 2012 +0530" }, "message": "USB: android: Add OTG descriptor to configuration\n\nInclude OTG descriptor in configuration when gadget is\ncapable of OTG. SRP and HNP capablities are exposed for now.\nThis patch will help to inform USB Host that our device\nis OTG capable via configuration descriptor.\n\nChange-Id: Idc72ee8168a478f0124c91b99d3123eab5e71adb\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\n" }, { "commit": "a3152031da5d2dbce83bd0ab8b56b31108ad6255", "tree": "ac2fad78ff7cd90fac84ce593f0fca9f95cd1c0e", "parents": [ "a36dc2ca7d9c0b71ffaef2fcdcaae9a211add39e" ], "author": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Mon Mar 05 16:29:30 2012 +0530" }, "committer": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Tue Mar 13 11:39:37 2012 +0530" }, "message": "USB: OTG: msm: Add support for SRP and HNP\n\nThis patch changes OTG driver to support different\nOTG statemachine states for OTG2.0 complaince. It will\nalso enable to swap Host role between two OTG devices\nvia HNP and enable B device to request A device to start\nVBUS session via SRP.\n\nChange-Id: Ibe2519ff1570768f51e879af483a6f5c23b38d8f\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\nSigned-off-by: Pavankumar Kondeti \u003cpkondeti@codeaurora.org\u003e\n" }, { "commit": "a36dc2ca7d9c0b71ffaef2fcdcaae9a211add39e", "tree": "15456346d2ab4709caf0ef738487ab5d0762cc98", "parents": [ "d450cb04b0775358333a19bac2a7dd4407cd3b52" ], "author": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Mon Mar 05 16:09:40 2012 +0530" }, "committer": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Tue Mar 13 11:35:42 2012 +0530" }, "message": "USB: EHCI: use otg_start_hnp() to intiate HNP in ehci-hub.c\n\nEHCI core intiates HNP by calling otg_start_hnp() API when OTG port\nis put into suspend to notify OTG driver which will take care of\nHNP by suspending host and kicking gadget.\n\nChange-Id: I2982b9f49140c2dcf2a32691e74f177e8d5d08cb\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\n" }, { "commit": "d450cb04b0775358333a19bac2a7dd4407cd3b52", "tree": "0050bcde7c8594c7234c8666ba6f055b01a852ed", "parents": [ "54a02757a593b00fd3eea12fd3a9f766045601f6" ], "author": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Sat Feb 25 14:35:26 2012 +0530" }, "committer": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Tue Mar 13 11:35:17 2012 +0530" }, "message": "USB: gadget: Add OTG support for ci13xxx_udc\n\nAdd support for processing OTG feature requests like b_hnp_enable,\na_hnp_support, test mode features like otg_srp_reqd, otg_hnp_reqd and\nHNP polling.\n\nChange-Id: Icb2a8c32c3b566638e48d89bac1aeef453d0e8fa\nSigned-off-by: Pavankumar Kondeti \u003cpkondeti@codeaurora.org\u003e\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\n" }, { "commit": "4ea731c40e5bf08dcb2f5f841db52d926d6ec548", "tree": "699d6225fa6bd35da873d99c913694c8c37632ac", "parents": [ "54a02757a593b00fd3eea12fd3a9f766045601f6" ], "author": { "name": "Oluwafemi Adeyemi", "email": "aadeyemi@codeaurora.org", "time": "Wed Mar 07 14:47:36 2012 -0800" }, "committer": { "name": "Oluwafemi Adeyemi", "email": "aadeyemi@codeaurora.org", "time": "Mon Mar 12 21:34:12 2012 -0700" }, "message": "mmc: msm_sdcc: Power down slots after reboot\n\nSome reboot methods (eg. adb reboot) may not power\ndown SDCC slots. This can result in cards being\nin unexpected states after reboot. Explicitly reset\nslot voltage regulator on reboot.\n\nCRs-Fixed: 341840\nChange-Id: I8cdb52bc58e34900378af468794760653f3babad\nSigned-off-by: Oluwafemi Adeyemi \u003caadeyemi@codeaurora.org\u003e\n" }, { "commit": "1d4731ee979106d1f661418bf0f5544634d26b8e", "tree": "a6fb5f4217fae7084d179fb0dfd8d9c72ede7b73", "parents": [ "54a02757a593b00fd3eea12fd3a9f766045601f6" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Tue Feb 21 20:18:23 2012 -0800" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Mon Mar 12 19:28:55 2012 -0700" }, "message": "msm_serial_hs_lite: Save UART registers if stuck\n\nPreserve and attempt to print out relevant UARTDM core\nregisters, followed by panicing the system, if the\npolling-mode serial console fails to print a character as a\nresult of the TX buffer remaining full for more than 100\ncharacter transmit times. This information is useful for\ntroubleshooting extremely rare cases where the serial\nconsole unexpectedly stops producing output.\n\nChange-Id: Iaaf13a01cf6ce33637a45f33b9ae6fce939cf7cd\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "7d6d27366a0581eb99bafd1563b6f7551d0c50b1", "tree": "ca4b8f267157417c3b1467383c40b4f192f66a7d", "parents": [ "765eaaffb8b2011a1bd4a9e0e92cdd50669a9ffc" ], "author": { "name": "Eugene Seah", "email": "eseah@codeaurora.org", "time": "Fri Mar 09 17:48:42 2012 -0700" }, "committer": { "name": "Eugene Seah", "email": "eseah@codeaurora.org", "time": "Mon Mar 12 19:42:54 2012 -0600" }, "message": "thermal: Fix hotplug race condition leading to memory corruption.\n\nmsm_thermal module made a copy of the CPUFreq policy structure\npointer but continues to try and use it after the core has been\nhotplugged (and the original structure is freed). The fix is to\nuse cpufreq_cpu_get/put instead of copying cpufreq pointers.\n\nCRs-fixed: 342351\nChange-Id: I312d8bccc09a5df5805f99fecdc9409d9d4ed2be\nSigned-off-by: Eugene Seah \u003ceseah@codeaurora.org\u003e\n" }, { "commit": "ed3593ce56f4c023f9ffaa1a287a442563c4688f", "tree": "1ab1677272edf99f84ce40ee1c0542bbf559a98e", "parents": [ "688afba7da513dfaa28f7b738be9e5d26703668b" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Thu Mar 08 10:15:04 2012 -0800" }, "committer": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Mon Mar 12 17:26:16 2012 -0700" }, "message": "msm: display: Set DSI Video Chimei panel as default for 8064 v1.1 Liquid\n\nFor 8064 v1.1 Liquid devices, DSI Video Chimei panel is the default\npanel. This change selects DSI Video Chimei panel as default during\npanel detection for version 1.1 Liquid alone.\n\nChange-Id: I52c6228b8be244307dd2db5296923a14882ac132\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\n" }, { "commit": "54a02757a593b00fd3eea12fd3a9f766045601f6", "tree": "2ecfd50f6d5c1ed83d083a312ac07f1e12e1c05f", "parents": [ "a6d07e70fb5b0aea497ba2246dcfb435a7639144", "69c8ebdc5925f30b9f7a4bb25efaaf25e8d140b4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Mar 12 15:21:52 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Mar 12 15:21:52 2012 -0700" }, "message": "Merge \"msm: mach-types: fix file permissions of arch/arm/tools/mach-types\" into msm-3.0" }, { "commit": "a6d07e70fb5b0aea497ba2246dcfb435a7639144", "tree": "34483297a5b50759c0d1573f39678819ad7f126a", "parents": [ "89cd744070049780c568dd3fae4219a934e7df0b", "9a8f4eb2803805f9ce4eab4f90c74453f1d13b0c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Mar 12 15:21:52 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Mar 12 15:21:52 2012 -0700" }, "message": "Merge \"mfd: pmic8901: Fix section mismatches\" into msm-3.0" }, { "commit": "89cd744070049780c568dd3fae4219a934e7df0b", "tree": "e4bc4b0e9f1d727b2ac557ff4e7757ed95cf5e18", "parents": [ "0cfe817abe2da8259ccaecfc16b4acb7460dab6c", "416878307740e2d475511ed0f12ebbd50db8c156" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Mar 12 15:21:52 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Mar 12 15:21:52 2012 -0700" }, "message": "Merge \"msm_fb : display : Add support for NT35516 qHD panel\" into msm-3.0" }, { "commit": "0cfe817abe2da8259ccaecfc16b4acb7460dab6c", "tree": "ea205e936e5ac7bf3a42fc545e58246c941399b6", "parents": [ "cb31e2b319aa03d1c72f065fe028337f16f2e70f", "e9c820fafb01faa069029613b9f225e275575473" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Mar 12 15:21:52 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Mar 12 15:21:52 2012 -0700" }, "message": "Merge \"msm: board: Disable Vreg line LDO16 for Quiclogic MDDI Client\" into msm-3.0" }, { "commit": "cb31e2b319aa03d1c72f065fe028337f16f2e70f", "tree": "52228d678c8d5f34ba16c8d3068aa6f3256a2adf", "parents": [ "050abade08f9f0d5416d0a4ca60c6ea3a5046868", "1670f3851ff649aafe2327a06c450a4497319e96" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Mar 12 15:21:52 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Mar 12 15:21:52 2012 -0700" }, "message": "Merge \"Bluetooth: Clear HCI_INQUIRY flags for successive inquiry scans to succeed\" into msm-3.0" }, { "commit": "050abade08f9f0d5416d0a4ca60c6ea3a5046868", "tree": "89659193c36d7b68bcfeaef1990498835b991866", "parents": [ "632752ab47cd287287a0a6382b802911c3b64225", "cb7c8920c5af6e432acfefdfe849aa40ad17b47d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Mar 12 15:21:52 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Mar 12 15:21:52 2012 -0700" }, "message": "Merge \"ASoC: wcd9310: Update hardware version dependent register address\" into msm-3.0" }, { "commit": "07552e154133ffc4e7c0691933fd48ff89095038", "tree": "af0f98717defd299e5b737029014c160ef2b090b", "parents": [ "632752ab47cd287287a0a6382b802911c3b64225" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Wed Feb 29 20:09:32 2012 -0800" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Mon Mar 12 13:34:00 2012 -0700" }, "message": "msm: Add support for cache error reporting\n\nAdd support for reporting L1 / L2 cache errors and TLB\nerrors, as well as printing a warning in the kernel log (or\noptionally panicing the kernel) depending on error\nseverity.\n\nChange-Id: I6aa4de4bbf478091df88d8ca0be840cbeb4d39d4\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "91e0ebdd1e9628c88218f30d045113f0e37d88eb", "tree": "ef708c2e599c5fd3210fc14b2430ebc122832f82", "parents": [ "632752ab47cd287287a0a6382b802911c3b64225" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Mon Mar 12 14:03:03 2012 -0600" }, "committer": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Mon Mar 12 14:03:03 2012 -0600" }, "message": "msm: smd: add RPM processor id and edges\n\nAdd the processor id and edge definitions to enable SMD communication to\nand from the RPM subsystem.\n\nChange-Id: I71c45b648aed19a3e0ad08db6a23426e50e76c58\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n" }, { "commit": "e5c9f6e5f9fe550e228cc5b34dbde086b151a613", "tree": "f60fe4b191ec91c65657ba52057f9ab0485c0c4e", "parents": [ "632752ab47cd287287a0a6382b802911c3b64225" ], "author": { "name": "Huaibin Yang", "email": "huaibiny@codeaurora.org", "time": "Wed Feb 22 15:09:07 2012 -0800" }, "committer": { "name": "Huaibin Yang", "email": "huaibiny@codeaurora.org", "time": "Mon Mar 12 11:59:37 2012 -0700" }, "message": "msm_fb: display: initialize is_flag variable\n\nThis local variable needs to have init value, otherwize it is always\ntrue, possible for mdp4_overlay_perf_level to return incorrect value.\n\nCRs-fixed: 338543\nChange-Id: Icbb665773545e866c7f48edaf3ecf11272713d19\nSigned-off-by: Huaibin Yang \u003chuaibiny@codeaurora.org\u003e\n" }, { "commit": "632752ab47cd287287a0a6382b802911c3b64225", "tree": "cf2549fe297e0a139ed6ec9d860627135fcbe41b", "parents": [ "c17e362dd64cba776828724060faee47ada5748f", "f5a31429ea22e54dacc08c0534a1085396e82ab8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Mar 12 11:50:20 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Mar 12 11:50:20 2012 -0700" }, "message": "Merge \"board: 8064: storage: vote against IDLE power collapse\" into msm-3.0" }, { "commit": "c17e362dd64cba776828724060faee47ada5748f", "tree": "1dd2b79ee4ba4e8fc87a46903e95a81f97a890a2", "parents": [ "b25aaca32e507a21f5c0a237c878526eb4b2c9de", "79952fec782eb0069734ad5e346fee59cbbdf0de" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Mar 12 11:50:20 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Mar 12 11:50:20 2012 -0700" }, "message": "Merge \"regulator: pm8xxx-regulator: Fix regulator type bound check\" into msm-3.0" }, { "commit": "b25aaca32e507a21f5c0a237c878526eb4b2c9de", "tree": "3667142afa935bfa16e5c2aca208d4d07b1778db", "parents": [ "688afba7da513dfaa28f7b738be9e5d26703668b", "f3471efa04bd1da4f682bbd8423844919f0e832d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Mar 12 11:50:20 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Mar 12 11:50:20 2012 -0700" }, "message": "Merge \"msm: pil-gss: Request the AXI port to halt before shutting down peripheral\" into msm-3.0" }, { "commit": "9e07aa9b1b4e25cadd5c15f1994ff1cfd51600d0", "tree": "5fbd10263063002168306bfc0a50b924db76a681", "parents": [ "688afba7da513dfaa28f7b738be9e5d26703668b" ], "author": { "name": "Swaminathan Sathappan", "email": "Swami@codeaurora.org", "time": "Wed Feb 29 12:07:27 2012 -0800" }, "committer": { "name": "Swaminathan Sathappan", "email": "Swami@codeaurora.org", "time": "Mon Mar 12 11:43:44 2012 -0700" }, "message": "msm: apq8064: Remove GPIO configurations related to audio auxpcm\n\nAudio auxpcm GPIO configurations are removed as these\ngpio pins are used by some other primary user\n\nChange-Id: I0dec2f92fa7b61ad9fc4a4632f9e7119b31d0385\nSigned-off-by: Swaminathan Sathappan \u003cSwami@codeaurora.org\u003e\n" }, { "commit": "94ad7e271f0744963ca418aa774b106cbfb6b759", "tree": "481f552d49cb5e9e427c3a1b0e4a27ff6f04e2b1", "parents": [ "688afba7da513dfaa28f7b738be9e5d26703668b" ], "author": { "name": "Bharath Ramachandramurthy", "email": "bramacha@codeaurora.org", "time": "Tue Feb 28 18:44:07 2012 -0800" }, "committer": { "name": "Swaminathan Sathappan", "email": "Swami@codeaurora.org", "time": "Mon Mar 12 11:14:17 2012 -0700" }, "message": "ASOC: msm: Modify debug messages and conditional checks\n\nModify debug messages, remove deprecated functions,\nproper handling of local pointers, check valid range\nof values in conditional checks, check array boundaries\nin conditions\n\nChange-Id: I0b20297261727143ec3099599274916404007463\nSigned-off-by: Bharath Ramachandramurthy \u003cbramacha@codeaurora.org\u003e\nSigned-off-by: Swaminathan Sathappan \u003cSwami@codeaurora.org\u003e\n" }, { "commit": "daf36d132af521529d00013208d617e0f64d097d", "tree": "8f6eb0cf0d15c05849d2ee15e108ee975fda7270", "parents": [ "688afba7da513dfaa28f7b738be9e5d26703668b" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Wed Feb 08 17:05:21 2012 -0700" }, "committer": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Mon Mar 12 11:46:18 2012 -0600" }, "message": "msm: smd_tty: Add check for platform device id\n\nVerify both the platform id (SMD port edge) and\nthe platform name (SMD port name) match during\ndriver binding to prevent registering for the\ncorrect SMD port name, but the wrong SMD port\nedge.\n\nAn SMD Port can be uniquely identified in the\nsystem by its name and edge and both of these\nmust match for binding to ensure that the\ncorrect port is being opened. Without this\ncheck, the driver could potentially attach\nto the wrong processor resulting in undefined\nbehavior.\n\nChange-Id: Ic461b6f521ba4e94f41f0b2e608154cbf8eab5c3\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "cb7c8920c5af6e432acfefdfe849aa40ad17b47d", "tree": "cf03ab7f794b6f5e1289213ccf26bdb70eb2dabe", "parents": [ "688afba7da513dfaa28f7b738be9e5d26703668b" ], "author": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Thu Feb 16 23:12:59 2012 -0800" }, "committer": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Mon Mar 12 09:42:53 2012 -0700" }, "message": "ASoC: wcd9310: Update hardware version dependent register address\n\nThere are codec registers which have different addresses depending on\nhardware version. Update registers\u0027 address correctly.\n\nCRs-fixed: 340283\nChange-Id: If848f71a40d244ee900dc86608058749c334ff4b\nSigned-off-by: Joonwoo Park \u003cjoonwoop@codeaurora.org\u003e\n" }, { "commit": "1670f3851ff649aafe2327a06c450a4497319e96", "tree": "85423cf3b20392ff313e4d34dfab38d0e13c123c", "parents": [ "bd404367576fa00bde02187899ba3824fb8a48f2" ], "author": { "name": "Royston Rodrigues", "email": "roystonr@codeaurora.org", "time": "Tue Feb 28 21:39:10 2012 +0530" }, "committer": { "name": "Royston Rodrigues", "email": "roystonr@codeaurora.org", "time": "Mon Mar 12 21:15:24 2012 +0530" }, "message": "Bluetooth: Clear HCI_INQUIRY flags for successive inquiry scans to succeed\n\nHCI_INQUIRY flags wasn\u0027t cleared thereby causing successive inquiry scans\ntriggered via IOCTLs to fail as connection timeout. As a consequence\nsuccessive device scans triggered by Bluez tool (hcitool) failed.\nNow HCI_INQUIRY flags are cleared irrespective of device type being BR/EDR\nor LE.\n\nChange-Id: Ic5e4804b52f18a46940f38d1e14e8c6825fa97bb\nSigned-off-by: Royston Rodrigues \u003croystonr@codeaurora.org\u003e\n" }, { "commit": "688afba7da513dfaa28f7b738be9e5d26703668b", "tree": "44a83c486e5303ec866c83a984782991e3352fc1", "parents": [ "c8b229faccf5419fa8e3f716eae47f2e0514597c", "0507c8cefa525a89df9b9e2a305e2bd7c4f6d7b2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Mar 12 08:41:07 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Mar 12 08:41:07 2012 -0700" }, "message": "Merge \"msm_fb: HDMI: Add support for HDMI on APQ8064\" into msm-3.0" }, { "commit": "c8b229faccf5419fa8e3f716eae47f2e0514597c", "tree": "137649f3c1a655dff1c311f3b5cf06d2a0908b85", "parents": [ "1c79eb623e66b7f99110a2ba7af75cada6f91d2c", "599d3556447da0b24c5572738d3d077eedc09517" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Mar 12 08:41:07 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Mar 12 08:41:07 2012 -0700" }, "message": "Merge \"board: msm: Handle VDD_PX2 leakage on EVB\" into msm-3.0" }, { "commit": "1c79eb623e66b7f99110a2ba7af75cada6f91d2c", "tree": "d453f8c339a64f50155ede726c6375706a8fb48e", "parents": [ "68532ec4f4d309bf39e445947f133734daf6b430", "5e3f9fc44e3853573b03621f7410afe8a439f989" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Mar 12 08:41:07 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Mar 12 08:41:07 2012 -0700" }, "message": "Merge \"msm: pil-riva: Hold wakelock while proxy voting\" into msm-3.0" }, { "commit": "8ebb22894909438ea1ae8f7b2b5ca819e4781109", "tree": "ab9b540ceaccd31d788033dd9ccaf1a1d782d696", "parents": [ "bd404367576fa00bde02187899ba3824fb8a48f2" ], "author": { "name": "Sudhakara Rao Tentu", "email": "srtentu@codeaurora.org", "time": "Tue Mar 06 14:52:58 2012 +0530" }, "committer": { "name": "Sudhakara Rao Tentu", "email": "srtentu@codeaurora.org", "time": "Mon Mar 12 20:14:26 2012 +0530" }, "message": "msm: kgsl: Add graphics support for msm8930\n\nAllow GPU chipid detection in msm8930,A3xx driver used\nin msm8064 and msm8930.\n\nChange-Id: Idf8229d24a59e56ba3eb7d0a52b28599b726072b\nSigned-off-by: Sudhakara Rao Tentu \u003csrtentu@codeaurora.org\u003e\n" }, { "commit": "df6e62f285e5a044778415e65ebbe7cf0cb000b3", "tree": "cad2fd3e94bfa8ddb12eaef4304bc8ba62d16a29", "parents": [ "bd404367576fa00bde02187899ba3824fb8a48f2" ], "author": { "name": "Rajesh Kemisetti", "email": "rajeshk@codeaurora.org", "time": "Mon Mar 12 14:02:30 2012 +0530" }, "committer": { "name": "Rajesh Kemisetti", "email": "rajeshk@codeaurora.org", "time": "Mon Mar 12 17:59:03 2012 +0530" }, "message": "Revert \"msm: board-msm7x27a: Huge idle timeout for 3D device in msm8625\"\n\nThis reverts commit b103129f4f9be57f837dff219e971f92ed347cf8.\n\nSleep \u0026 Wake cycles of 3D device need footswitch configuration.\nit is enabled with commit-id e380a2d7f520c095543bf861f755b813a04b8889\nso removing the huge idle timeout.\n\nChange-Id: I22529711f196504a28ebf0ff3e0344f7403612b4\nSigned-off-by: Rajesh Kemisetti \u003crajeshk@codeaurora.org\u003e\n" }, { "commit": "8ee084e51bd0aa0a931d0f7733d898eab1b76d3a", "tree": "589e5a0b28d6eeb22a674941817c64df3f4cdd27", "parents": [ "bd404367576fa00bde02187899ba3824fb8a48f2" ], "author": { "name": "Murali Nalajala", "email": "mnalajal@codeaurora.org", "time": "Wed Mar 07 00:09:38 2012 +0530" }, "committer": { "name": "Murali Nalajala", "email": "mnalajal@codeaurora.org", "time": "Mon Mar 12 17:14:59 2012 +0530" }, "message": "msm: board-msm7627a: Add PM platform data for 8625 SURF\n\nSet power driver platform data for 8625 SURF board.\n\nChange-Id: I5ad87f28be93d9d183c91ca72fa06a9c268ccce9\nSigned-off-by: Murali Nalajala \u003cmnalajal@codeaurora.org\u003e\n" }, { "commit": "0473d05091f0df4d85e4f6a162f55a9af8d3307b", "tree": "aed15857eded6538018c2d6a12530e032df2b885", "parents": [ "bd404367576fa00bde02187899ba3824fb8a48f2" ], "author": { "name": "Padmanabhan Komanduru", "email": "pkomandu@codeaurora.org", "time": "Tue Feb 21 12:00:12 2012 +0530" }, "committer": { "name": "Padmanabhan Komanduru", "email": "pkomandu@codeaurora.org", "time": "Mon Mar 12 12:21:59 2012 +0530" }, "message": "msm_fb: Clean up of frame buffer 4KB alignment changes\n\nRemove redundant code from the 4 KB alignment patch\nand reduce the overhead of calculation of the hole\nsize by using bitwise operators in its calculation.\n\nCRs-fixed: 325134\nChange-Id: Ie2e3ea7cbb2a815ae4f50cb97e6c5be1bd72fe27\nSigned-off-by: Padmanabhan Komanduru \u003cpkomandu@codeaurora.org\u003e\n" }, { "commit": "e9c820fafb01faa069029613b9f225e275575473", "tree": "8168dca630c3dbab6f21d60f9307befbe7ca1e74", "parents": [ "bd404367576fa00bde02187899ba3824fb8a48f2" ], "author": { "name": "Padmanabhan Komanduru", "email": "pkomandu@codeaurora.org", "time": "Fri Feb 17 19:20:52 2012 +0530" }, "committer": { "name": "Padmanabhan Komanduru", "email": "pkomandu@codeaurora.org", "time": "Mon Mar 12 12:18:36 2012 +0530" }, "message": "msm: board: Disable Vreg line LDO16 for Quiclogic MDDI Client\n\nLDO16 is not required for Quiclogic client on 7x30 devices.\nHence, it has to be disabled for this client.\n\nCRs-fixed: 334751\nChange-Id: I88f163a0a326a864556d1f3d1c9be7ebb9148220\nSigned-off-by: Padmanabhan Komanduru \u003cpkomandu@codeaurora.org\u003e\n" }, { "commit": "599d3556447da0b24c5572738d3d077eedc09517", "tree": "2b682607a954025427c367b2ff4eb3c403939d8f", "parents": [ "bd404367576fa00bde02187899ba3824fb8a48f2" ], "author": { "name": "Padmanabhan Komanduru", "email": "pkomandu@codeaurora.org", "time": "Tue Feb 21 16:53:05 2012 +0530" }, "committer": { "name": "Padmanabhan Komanduru", "email": "pkomandu@codeaurora.org", "time": "Mon Mar 12 12:09:15 2012 +0530" }, "message": "board: msm: Handle VDD_PX2 leakage on EVB\n\nHandle improper configuration of GPIO 85 during sleep\nto avoid the VDD_PX2 leakage current of about 0.1 mA.\n\nCRs-fixed: 338533\nChange-Id: Ia5092a8157d89b75c3256d13066fcc93603be286\nSigned-off-by: Padmanabhan Komanduru \u003cpkomandu@codeaurora.org\u003e\n" }, { "commit": "f5a31429ea22e54dacc08c0534a1085396e82ab8", "tree": "8f2b0a5205a6919e6edd6d55e8b6316d8d839b3b", "parents": [ "bd404367576fa00bde02187899ba3824fb8a48f2" ], "author": { "name": "Oluwafemi Adeyemi", "email": "aadeyemi@codeaurora.org", "time": "Thu Mar 08 16:58:45 2012 -0800" }, "committer": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Mon Mar 12 11:42:40 2012 +0530" }, "message": "board: 8064: storage: vote against IDLE power collapse\n\nDuring the SDCC DMA transfer, if DMA transfer time is\nlong enough to do IDLE power collapse then system may\ngo into IDLE power collapse and once SDCC DMA transfer\nis completed, system wakes up from Idle Power Collapse\ndue to SDCC DMA interrupt. But delay for waking up\nfrom Idle Power collapse could be as large as 5 ms which\nreally degrades the overall read \u0026 write throughputs\nfor SD/eMMC/SDIO cards.\n\nFor example, following are the performance numbers with\neMMC card on MSM8960 platform with and without Idle Power\nCollapse.\n\nIdle Power collapse enabled:\n\tLMDD Read throughput \u003d ~14 MB/s\n\tLMDD Write throughput \u003d ~6 MB/s\n\nIdle Power Collapse disabled:\n\tLMDD Read throughput \u003d ~25 MB/s\n\tLMDD Write throughput \u003d ~8 MB/s\n\nSo this change votes against the Idle power collapse by registering\nwith PM QOS about it\u0027s acceptable DMA latency when SDCC transfer is\nactive. This latency value is one more than the latency of SWFI\nwhich means system can go into SWFI but not in any of the other\nlow power modes (including Idle power collapse).\n\nChange-Id: I8740dd5bb86fe8cfbf6a294850d378a3c6692f40\nSigned-off-by: Oluwafemi Adeyemi \u003caadeyemi@codeaurora.org\u003e\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "c6f7867e7ffc7e0cdfde39ec0cb05a3e4278bdf5", "tree": "268700f015fd853e46f17dbd108d3f20ec3e80b3", "parents": [ "bd404367576fa00bde02187899ba3824fb8a48f2" ], "author": { "name": "Sandeep Kodimela", "email": "skodimela@codeaurora.org", "time": "Wed Mar 07 10:44:04 2012 +0530" }, "committer": { "name": "Sandeep Kodimela", "email": "skodimela@codeaurora.org", "time": "Mon Mar 12 11:41:07 2012 +0530" }, "message": "msm-camera: Add 8MP and 1MP sensor support\n\nAdd support to mt9e013 and ov9726 sensors for v4l2 camera\narchitecture\n\nChange-Id: Ie0e12bb0b8f1d80c0aa40800f5578208ca86efcb\nSigned-off-by: Sandeep Kodimela \u003cskodimela@codeaurora.org\u003e\n" }, { "commit": "9d76704c8dac8f9e0794834cc4d62c17fd9cdf63", "tree": "f828079e978ce42f6e2781bfd41c704ce9eb924f", "parents": [ "bd404367576fa00bde02187899ba3824fb8a48f2" ], "author": { "name": "Kuogee Hsieh", "email": "khsieh@codeaurora.org", "time": "Fri Feb 10 08:40:51 2012 -0800" }, "committer": { "name": "Mayank Chopra", "email": "makchopra@codeaurora.org", "time": "Mon Mar 12 11:01:34 2012 +0530" }, "message": "msm_fb: display: clean dsi fifo during dsi_off\n\nDuring suspend, wait until dsi controller\u0027s fifo is\ncleaned before disabling dsi controller. This will\nprevent pixels that were left over in the fifo from\nbeing displayed during next resume.\n\nCRs-fixed: 336049\nChange-Id: If5b80d0c3a9b5edd21ae6651321572c2fdcac951\nSigned-off-by: Kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "68532ec4f4d309bf39e445947f133734daf6b430", "tree": "5d5e72c3523699629c2a3faf7c45a1164ba257f2", "parents": [ "bd404367576fa00bde02187899ba3824fb8a48f2" ], "author": { "name": "Manish Dewangan", "email": "manish@codeaurora.org", "time": "Mon Mar 12 10:31:31 2012 +0530" }, "committer": { "name": "Manish Dewangan", "email": "manish@codeaurora.org", "time": "Mon Mar 12 10:44:57 2012 +0530" }, "message": "msm: qdsp5: Initialize event length during adsp fake event generation\n\nDuring adsp fake event generation, event length is not getting\ninitialized. This sometimes results in incorrect event data being read\nduring fake event processing by adsp driver clients.\n\nFix this by initializing event length properly before generating the\nfake event.\n\nChange-Id: Ifcab5adf542b04eef3dc03913b8e10c68f686e8c\nSigned-off-by: Manish Dewangan \u003cmanish@codeaurora.org\u003e\n" }, { "commit": "bd404367576fa00bde02187899ba3824fb8a48f2", "tree": "5583c25c3ddf4bbf92e4da2e6b06d1e089fa2703", "parents": [ "2a43c916a927acb3bbf0148a58eedbeb9a00444f", "3137c602f6a5e4214a27cbf1f16b3cac3dc322b1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Mar 11 17:01:37 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Mar 11 17:01:37 2012 -0700" }, "message": "Merge \"defconfig: msm7627a: Disable RC_CORE and DEBUG_LL\" into msm-3.0" }, { "commit": "0507c8cefa525a89df9b9e2a305e2bd7c4f6d7b2", "tree": "1e0755e1a64edaa344a34328973d8a205010d8d8", "parents": [ "2a43c916a927acb3bbf0148a58eedbeb9a00444f" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Thu Feb 16 17:16:05 2012 -0800" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Sun Mar 11 14:30:06 2012 -0700" }, "message": "msm_fb: HDMI: Add support for HDMI on APQ8064\n\nConfigure necessary PMIC regulators, GPIO, clocks\nand parameters related to external display to enable\nHDMI on APQ8064 target.\n\nChange-Id: Ia2741fc13c6a640ebc610461ad4242929383b611\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "2a43c916a927acb3bbf0148a58eedbeb9a00444f", "tree": "b7622f642860e005c5af0b6774b507a908473eb4", "parents": [ "3f8f842c57bc07323adec79246bb5da86a3a78d8", "5245ec886f6e282b8f3c1b0e3f7aecbfae9ed85a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Mar 11 14:11:22 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Mar 11 14:11:22 2012 -0700" }, "message": "Merge \"msm_fb: display: change pixel sequence on lvds lanes\" into msm-3.0" }, { "commit": "69c8ebdc5925f30b9f7a4bb25efaaf25e8d140b4", "tree": "ea2540a8aa37cc367fea6fb4e3a958f3d94fc4e0", "parents": [ "570f996e138390f3a33709ca315a95a257661d48" ], "author": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Wed Feb 29 17:09:45 2012 -0800" }, "committer": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Sun Mar 11 11:46:05 2012 -0700" }, "message": "msm: mach-types: fix file permissions of arch/arm/tools/mach-types\n\nThis is a text file and should not have execute permission.\nExecute permissions are removed.\n\nChange-Id: Ia10102e621a6fc4107cd58fd0480dc542fee5acf\nSigned-off-by: Joel King \u003cjoelking@codeaurora.org\u003e\n" }, { "commit": "7052e132e82dc0c2e1bd19a140ac2a0c5fb193b8", "tree": "bf16585e2917550c804fb9b37b663f34cfd52e5c", "parents": [ "570f996e138390f3a33709ca315a95a257661d48" ], "author": { "name": "Eugene Yasman", "email": "eyasman@codeaurora.org", "time": "Sun Mar 11 16:16:06 2012 +0200" }, "committer": { "name": "Eugene Yasman", "email": "eyasman@codeaurora.org", "time": "Sun Mar 11 16:16:06 2012 +0200" }, "message": "msm: display: Align framebuffer resolution to 32 pixels.\n\nAlign framebuffer resolution to match hardware requirements.\n\nIn case Adreno GPU is writing directly to framebuffer,\nthe framebuffer pitch needs to be 32 pixel aligned.\n\nChange-Id: I918a04c86a302c3e574b37c9b5d79a651657d720\nSigned-off-by: Eugene Yasman \u003ceyasman@codeaurora.org\u003e\n" }, { "commit": "3f8f842c57bc07323adec79246bb5da86a3a78d8", "tree": "2028048bb854f80be9c60ea6437310e6b0a64a5d", "parents": [ "570f996e138390f3a33709ca315a95a257661d48" ], "author": { "name": "Jing Lin", "email": "jinglin@codeaurora.org", "time": "Mon Mar 05 09:32:11 2012 -0800" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Mar 11 06:41:36 2012 -0600" }, "message": "msm: 8064: Use PMIC GPIO 42 for rotation lock key\n\nRotation lock key uses PMIC GPIO 42. The previous configuration\nusing GPIO 46 is incorrect.\n\nChange-Id: I1710f2229059aac1f20617c9e9e0c6b1356f612b\nSigned-off-by: Jing Lin \u003cjinglin@codeaurora.org\u003e\n" }, { "commit": "570f996e138390f3a33709ca315a95a257661d48", "tree": "a05a7a44b486e0b991748a85e5ba112aa28550c2", "parents": [ "4ca275378e40c0ea857259d1b28a63056e019029", "7eb05da02b89b29e8f22795c9c2929cd5e76557b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Mar 11 05:25:00 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Mar 11 05:25:00 2012 -0700" }, "message": "Merge \"msm: io: Add HDMI TX mapping for APQ8064\" into msm-3.0" }, { "commit": "4ca275378e40c0ea857259d1b28a63056e019029", "tree": "e2e3e0e3f8cf7fdda73d9fc84873de583b6a94d3", "parents": [ "0503c0934910453b39e24acbf6a926fb42803874" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Thu Feb 16 14:27:05 2012 -0800" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Sat Mar 10 23:40:46 2012 -0800" }, "message": "board: 8064: Add Rotator Device Driver\n\nAdd the rotator device driver to the 8064 board file.\n\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\nChange-Id: I60bcb1776cc7d582b25be586e1a8504bd57001de\n" }, { "commit": "7eb05da02b89b29e8f22795c9c2929cd5e76557b", "tree": "e951c7c817209d808234583e58f13e3dfacf55d3", "parents": [ "0503c0934910453b39e24acbf6a926fb42803874" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Thu Feb 16 14:23:03 2012 -0800" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Sat Mar 10 23:36:30 2012 -0800" }, "message": "msm: io: Add HDMI TX mapping for APQ8064\n\nThis patch adds address mapping for the HDMI transmitter\nfor APQ8064.\n\nChange-Id: I87ebeb4f018f53158964b5ddfbface0549cbde12\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "0503c0934910453b39e24acbf6a926fb42803874", "tree": "1c94533902ced6bfaf8c507a2676940f138b8bf1", "parents": [ "e56bbd0a6748133fe0fe37a69c381a311a90c991", "3a45399410f9976569aa1631cad69757966160ac" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Mar 10 19:41:41 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Mar 10 19:41:41 2012 -0800" }, "message": "Merge changes Idfeebdec,Ief584324,If71c9d81,I1c09f530,I74b80572,I68c07f35 into msm-3.0\n\n* changes:\n msm: 8625: Enable ticket spinlocks\n msm: board-qrd7627a: Add UARTDM1 device to 8625 EVB device list.\n msm: 8625: Remove static mapping for second core\n msm: mpm-8625: GIC extension for 8625\n msm: footswitch-pcom: Enable Footswitch for 8625\n msm: dma: Fix the error checking for DMA clocks.\n" }, { "commit": "3137c602f6a5e4214a27cbf1f16b3cac3dc322b1", "tree": "8d290dafee6c639406f43f53d166a477838e4733", "parents": [ "e56bbd0a6748133fe0fe37a69c381a311a90c991" ], "author": { "name": "Taniya Das", "email": "tdas@codeaurora.org", "time": "Fri Mar 09 16:56:59 2012 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Mar 10 15:45:40 2012 -0700" }, "message": "defconfig: msm7627a: Disable RC_CORE and DEBUG_LL\n\nRC_CORE is not required to enabled and also disable Low level debugging by\ndefault.\n\nChange-Id: Ie6760cb9caf0b75e2357cac9fa43431f4ad4692d\nSigned-off-by: Taniya Das \u003ctdas@codeaurora.org\u003e\n" } ], "next": "e56bbd0a6748133fe0fe37a69c381a311a90c991" }