)]}' { "log": [ { "commit": "c7bf71c517abfc3b15970d67910e0f62e0522939", "tree": "7c426f987ba9c338a81456e551f3a868e2ac27ac", "parents": [ "a25cecce88194b2edf38b8c3b1665e9318eb2d22" ], "author": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Mon Jan 17 12:48:20 2011 -0800" }, "committer": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Tue Jan 18 12:22:54 2011 -0800" }, "message": "hwmon: (lm93) Add support for LM94\n\nThis patch adds basic support for LM94 to the LM93 driver. LM94 specific\nsensors and features are not supported.\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "d4b94e1fa6c69fd74abca5b7db1ab350d65ce89b", "tree": "89a7d4a1a5439896f64862cfd89d91c0a2a74d57", "parents": [ "7a1b76f2a46016809c7bcacf81e89948cc306703" ], "author": { "name": "Juerg Haefliger", "email": "juergh@gmail.com", "time": "Wed Jan 12 21:55:13 2011 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@endymion.delvare", "time": "Wed Jan 12 21:55:13 2011 +0100" }, "message": "hwmon: (dme1737) Add support for in7 for SCH5127\n\nAdd support for the 1.5V voltage monitoring input (in7) of the\nSMSC SCH5127 chip.\n\nSigned-off-by: Juerg Haefliger \u003cjuergh@gmail.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "3ea1bd58b999ec77c28834aa8be671168dfb7b79", "tree": "2a73de5517b15b8ca310137ea4b4b837b3af325e", "parents": [ "36c7fe133e29a0b2558edaef18b2401e99765417" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Jan 12 21:55:11 2011 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@endymion.delvare", "time": "Wed Jan 12 21:55:11 2011 +0100" }, "message": "hwmon: (w83627hf) Document W83627THF voltage pin mapping\n\nI had to look it up for one user, so we might as well store it in the\ndriver documentation.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\n" }, { "commit": "a516dc3e9b19adbcaa9aeda0100ee8ee2938748a", "tree": "fc4f5427bc90718829dd15434e067382b7d9500d", "parents": [ "c32301b5957bb77579eb80ff5a84324d34b97346" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Jan 12 21:55:10 2011 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@endymion.delvare", "time": "Wed Jan 12 21:55:10 2011 +0100" }, "message": "hwmon: (w83793) Implement the standard intrusion detection interface\n\nWe have a standard intrusion detection interface now, drivers should\nimplement it. I\u0027ve left the old interface in place for the time being,\nwith a deprecation warning, it will be removed later.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\n" }, { "commit": "0de2b244800b2c0d88d0a85bbe4a0b95fee13332", "tree": "0dc02243a53cb39402df923766d87a83a6d3b399", "parents": [ "f790674d3f87df6390828ac21a7d1530f71b59c8" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Jan 12 21:55:09 2011 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@endymion.delvare", "time": "Wed Jan 12 21:55:09 2011 +0100" }, "message": "hwmon: (adm9240) Implement the standard intrusion detection interface\n\nWe have a standard intrusion detection interface now, drivers should\nimplement it. I\u0027ve left the old interface in place for the time being,\nwith a deprecation warning, it will be removed later.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\n" }, { "commit": "5d84291da3a594ac391c85296e28f41ff92da0cf", "tree": "9442a19295d4d71702372b835b9079d0ea3f3f83", "parents": [ "4162cf64973df51fc885825bc9ca4d055891c49f" ], "author": { "name": "Steven Hardy", "email": "shardy@redhat.com", "time": "Wed Jan 12 21:55:08 2011 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@endymion.delvare", "time": "Wed Jan 12 21:55:08 2011 +0100" }, "message": "hwmon: (ads7828) Update email contact details\n\nTrivial patch updating my email contact details due to change of\nemployer, and because I no longer have access to the previously used\ndomain.\n\nUnfortunately I also no longer have access to any ads7828 hardware, but\nam happy to support/maintain the driver if others are able to test\nchanges.\n\nSigned-off-by: Steve Hardy \u003cshardy@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "6099469805c24af14250e182bb9ca082b8a6b716", "tree": "9b08dd1a10ff89f2557575f5bf95b07babf92beb", "parents": [ "430400b86304ea729ba10f2966a8af67da60a37f" ], "author": { "name": "Roland Stigge", "email": "stigge@antcom.de", "time": "Sun Jan 09 09:31:39 2011 -0500" }, "committer": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Sun Jan 09 09:10:10 2011 -0800" }, "message": "hwmon: Support for Dallas Semiconductor DS620\n\nDriver for Dallas Semiconductor DS620 temperature sensor and thermostat\n\nSigned-off-by: Roland Stigge \u003cstigge@antcom.de\u003e\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\n" }, { "commit": "430400b86304ea729ba10f2966a8af67da60a37f", "tree": "79abaa76d689a40923167103582bb11e69fd096c", "parents": [ "c6c2c1636e30bcd26c6b0d208324055a03c5ab9c" ], "author": { "name": "Urs Fleisch", "email": "urs.fleisch@gmail.com", "time": "Fri Jan 07 07:15:39 2011 +0000" }, "committer": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Sat Jan 08 10:56:28 2011 -0800" }, "message": "hwmon: driver for Sensirion SHT21 humidity and temperature sensor\n\nSigned-off-by: Urs Fleisch \u003curs.fleisch@sensirion.com\u003e\nAcked-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\n" }, { "commit": "c6c2c1636e30bcd26c6b0d208324055a03c5ab9c", "tree": "3bd9e1eabb2d33ce1031a4687c08a8eed0c0b470", "parents": [ "581693b51e44bb2c0cca16ab0c8d3cb535fd2ac8" ], "author": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Thu Jan 06 07:52:03 2011 -0800" }, "committer": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Sat Jan 08 10:56:27 2011 -0800" }, "message": "hwmon: Add humidity attribute to sysfs ABI\n\nThe humidity attribute is already supported by the sht15 driver, and another\ndriver supporting it is about to be added. Make it official.\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nAcked-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "581693b51e44bb2c0cca16ab0c8d3cb535fd2ac8", "tree": "fb856e64f4fefaecc3c9809b9220c61f6c6a4c2a", "parents": [ "ae9e0ce73e9fc55a620e0b3bd4a154330a7e64cc" ], "author": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Mon Jun 28 13:22:27 2010 -0700" }, "committer": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Sat Jan 08 10:55:49 2011 -0800" }, "message": "hwmon: sysfs ABI updates\n\nAdd attributes supported by various PMBus devices to hwmon sysfs ABI.\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\n" }, { "commit": "f99e0e98f95bbe8833bd96c314b71ef859851bc5", "tree": "7abd748057f9bd529cdcfb99a2b90fff6b2f42be", "parents": [ "ebde7b062cd9e2ea968c93f23f73dd28c0a192d1" ], "author": { "name": "Hans J. Koch", "email": "hjk@hansjkoch.de", "time": "Thu Nov 18 12:27:34 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Nov 18 15:00:46 2010 -0800" }, "message": "Documentation: change email address for Hans Koch\n\nMy old mail address doesn\u0027t exist anymore. This changes all occurrences\nto my new address.\n\nSigned-off-by: Hans J. Koch \u003chjk@hansjkoch.de\u003e\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "44c1bcd4bcde32b2a31a6775a277706ab489c0dc", "tree": "bb8f17e5c2d0e6e871906f3cddb32290cf1a09b8", "parents": [ "0df6454da937548594774788b009616ed27607ed" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Oct 28 20:31:51 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@endymion.delvare", "time": "Thu Oct 28 20:31:51 2010 +0200" }, "message": "hwmon: (it87) Add support for the IT8721F/IT8758E\n\nAdd support for the IT8721F/IT8758E. These new chips differ from the\nolder IT87xxF chips in the following ways:\n* ADC LSB is 12 mV instead of 16 mV.\n* PWM values are 8-bit instead of 7-bit.\nThere are other minor changes we don\u0027t have to care about in the\ndriver.\n\nAnother change is that we will handle internal voltage scaling in the\ndriver instead of delegating the work to user-space.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "f6c61cff8bcb58b8dfb645d4243a049908c02024", "tree": "bff2919dcf335f38cb36bdbd27fd5c5870e4b0e9", "parents": [ "c36364dbf38382ef6be2fb99a3ce361a679c0ecb" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Oct 28 20:31:50 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@endymion.delvare", "time": "Thu Oct 28 20:31:50 2010 +0200" }, "message": "hwmon: (lm85) Add support for ADT7468 high-frequency PWM mode\n\nThe ADT7468 supports a high-frequency PWM output mode where all PWM\noutputs are driven by a 22.5 kHz clock. Add support for this mode, and\ndocument it, as it may surprise the user that setting one PWM output\nfrequency also affects the other PWM outputs.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nAcked-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\n" }, { "commit": "c36364dbf38382ef6be2fb99a3ce361a679c0ecb", "tree": "f3e74a23870dfc244dd5fe0188681ffea8a5aaf9", "parents": [ "fa7a5797e57d2ed71f9a6fb44f0ae42c2d7b74b7" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Oct 28 20:31:50 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@endymion.delvare", "time": "Thu Oct 28 20:31:50 2010 +0200" }, "message": "hwmon: (lm85) Document the ADT7468 as supported\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nAcked-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\n" }, { "commit": "6dfee85397a47063291fe199eaf950bee7944454", "tree": "a0938da1f748f16621238e047a93f052fbd9adb2", "parents": [ "4275fcd65d3b4a504b7779e532c81a927afd28c0" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Oct 28 20:31:50 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@endymion.delvare", "time": "Thu Oct 28 20:31:50 2010 +0200" }, "message": "hwmon: (pcf8591) Don\u0027t attempt to detect devices\n\nThe PCF8591 can\u0027t be detected, don\u0027t even try. There are plenty of\nother means to instantiate i2c devices these days.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nReviewed-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nCc: Aurelien Jarno \u003caurelien@aurel32.net\u003e\n" }, { "commit": "c4f99a2b8fb4c564865f0037a2b7be690d4409f3", "tree": "3b6b7f2261be322412f9dd9eb0df6e3fed7f552c", "parents": [ "0c01b644f77a3df892a48a59901997469aeab0a7" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Oct 28 20:31:44 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@endymion.delvare", "time": "Thu Oct 28 20:31:44 2010 +0200" }, "message": "hwmon: (lm90) Add support for the W83L771W/G\n\nI was wondering if that chip ever existed publicly... Apparently yes,\nso add support for it.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nTested-by: Alexander Stein \u003calexander.stein@informatik.tu-chemnitz.de\u003e\nAcked-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\n" }, { "commit": "06e1c0a2167d48442d0bd06373390886670aa6e5", "tree": "ab8dd85f43e2d69ab2fcfd5a2f053ac7923a9685", "parents": [ "6948708dd07573c578aa99f80915cd1867334abe" ], "author": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Thu Oct 28 20:31:43 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@endymion.delvare", "time": "Thu Oct 28 20:31:43 2010 +0200" }, "message": "hwmon: (lm90) Add support for max6695 and max6696\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "6948708dd07573c578aa99f80915cd1867334abe", "tree": "ff218b1febbe70410d98589ae058cbad3784c0aa", "parents": [ "13c84951a3d75ba820adf47eb2a3b1c5ab1fa635" ], "author": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Thu Oct 28 20:31:43 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@endymion.delvare", "time": "Thu Oct 28 20:31:43 2010 +0200" }, "message": "hwmon: (lm90) Add support for extra features of max6659\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "13c84951a3d75ba820adf47eb2a3b1c5ab1fa635", "tree": "bb9eeb881f6e170ec97d744059732433d667e2f4", "parents": [ "96512861c3733609ac3d558602574674fa95ebf4" ], "author": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Thu Oct 28 20:31:43 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@endymion.delvare", "time": "Thu Oct 28 20:31:43 2010 +0200" }, "message": "hwmon: (lm90) Add explicit support for max6659\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "28e7438faacbd47aaf3e3b43c3074c64be98f5be", "tree": "dbd39d62c271fe46fa0bddaa5d292c7e9f125f8f", "parents": [ "628b4504cf69fbe262b41c16a4a3fd61b091d61c" ], "author": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Thu Oct 28 20:31:42 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@endymion.delvare", "time": "Thu Oct 28 20:31:42 2010 +0200" }, "message": "hwmon: Add tempX_emergency attribute to sysfs ABI\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "e5f5c99a39375ce533aacfdfb269978070121e1c", "tree": "0abf39b045d772cf11bc401bcb1a36985ad3d99a", "parents": [ "2ee321440e3a594dcdd9981e68e5e302447047a2" ], "author": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Fri Jun 25 11:59:54 2010 -0700" }, "committer": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Mon Oct 25 14:11:20 2010 -0700" }, "message": "hwmon: LTC4261 Hardware monitoring driver\n\nThis driver adds support for Linear Technology LTC4261 I2C Negative\nVoltage Hot Swap Controller.\n\nReviewed-by: Ira W. Snyder \u003ciws@ovro.caltech.edu\u003e\nReviewed-by: Tom Grennan \u003ctom.grennan@ericsson.com\u003e\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\n" }, { "commit": "a51b9944a1aaca34c9061d3973663fee54e9d1c1", "tree": "a0bca6cc212f3f0a73f1177a6a7e442f28a03059", "parents": [ "022b75a3df2b5aeeb70c5d51bc1fe55722fdd759" ], "author": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Fri Sep 17 17:24:14 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Sep 17 17:24:14 2010 +0200" }, "message": "hwmon: (adm1031) Replace update_rate sysfs attribute with update_interval\n\nThe attribute reflects an interval, not a rate.\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nAcked-by: Ira W. Snyder \u003ciws@ovro.caltech.edu\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "f2e41e910320197d55b52e28d99a07130f2ae738", "tree": "110e2a253c05d01faa01e7eb7a2fdbeef93b31b9", "parents": [ "a25effa4d265eb5028c7d4a92a0ddd9267c3c43d" ], "author": { "name": "Andrew Morton", "email": "akpm@linux-foundation.org", "time": "Thu Aug 19 14:13:31 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Aug 20 09:34:55 2010 -0700" }, "message": "revert \"hwmon: f71882fg: add support for the Fintek F71808E\"\n\nRevert commit 7721fea3d0fd93fb4d000eb737b444369358d6d3 (\"hwmon:\nf71882fg: add support for the Fintek F71808E\").\n\nHans said:\n\n: A second review after I\u0027ve received a data sheet for this device from\n: Fintek has turned up a few bugs.\n:\n: Unfortunately Giel (nor I) have time to fix this in time for the 2.6.36\n: cycle. Therefor I would like to see this patch reverted as not having any\n: support for the hwmon function of this superio chip is better then having\n: unreliable support.\n\nCc: Giel van Schijndel \u003cme@mortis.eu\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nCc: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "008e5f3350e0a474baff3ed3eb4f79653a6b6745", "tree": "b2a2b27fd68b6071bbe3f2560df477d39d2ddb24", "parents": [ "9d32df192d2e4db4d59f26a3ea73601bd1a733e5" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Aug 14 21:08:59 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Aug 14 21:08:59 2010 +0200" }, "message": "hwmon: (pc87427) Add temperature monitoring support\n\nAdd support for the 6 temperature monitoring channels of the PC87427.\nNote that the sensors resolution can vary, and I couldn\u0027t find a way\nto figure it out, so we might have to compensate in user-space.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\n" }, { "commit": "328716bc16b7077ea5f6293c7420247c570d6480", "tree": "e96b0cf74988b4b3b05c6408d8640ba61e99f63c", "parents": [ "0d22d5835d4c82d1d03399688267f63334efd526" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Aug 14 21:08:58 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Aug 14 21:08:58 2010 +0200" }, "message": "hwmon: (pc87427) Add support for manual fan speed control\n\nAdd initial support for PWM outputs of the PC87427 Super-I/O chip.\nOnly mode change and manual fan speed control are supported. Automatic\nmode configuration isn\u0027t supported, and won\u0027t be until at least one\nboard is known, which makes uses of the PWM outputs.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\n" }, { "commit": "c39aedafb242601729bef48db052ebc055ce3ab4", "tree": "518a88dca7fa8b4904a21ad88df761b02c466c04", "parents": [ "da2e025590cf7038440132d4bbc967a579b11112" ], "author": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Sat Aug 14 21:08:55 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Aug 14 21:08:55 2010 +0200" }, "message": "hwmon: (w83627ehf) Add support for W83667HG-B\n\nAdd support for W83667HG-B (very similar to the W83667HG).\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "9df7305b5a8651eb940e98496bc1d4742379c578", "tree": "a57f2f4feca16e98da54c9fc39d6f549ce137d1e", "parents": [ "5a9c2cd881f48d4bec627cccde386f8e3a28bb4a" ], "author": { "name": "Steve Glendinning", "email": "steve.glendinning@smsc.com", "time": "Sat Aug 14 21:08:54 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Aug 14 21:08:54 2010 +0200" }, "message": "hwmon: Add driver for SMSC EMC2103 temperature monitor and fan controller\n\nSMSC\u0027s EMC2103 family of temperature/fan controllers have 1\nonboard and up to 3 external temperature sensors, and allow\nclosed-loop control of one fan. This patch adds support for\nthem.\n\nSigned-off-by: Steve Glendinning \u003csteve.glendinning@smsc.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "5a9c2cd881f48d4bec627cccde386f8e3a28bb4a", "tree": "f9776db4c71c3e83e61a25b0efdf5bb5f263cad9", "parents": [ "e04a715e4e1210a6ecfcaa0e6ceefde07020710b" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Aug 14 21:08:54 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Aug 14 21:08:54 2010 +0200" }, "message": "hwmon: Remove in[0-*]_fault from sysfs-interface\n\nFault files are for hardware failures that can be reported. So far\nwe\u0027ve seen chips reporting such failures for temperature sensors and\nfans, but not for voltages. Remove in[0-*]_fault for now. It can be\nadded back later if really needed, but I doubt it.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\n" }, { "commit": "e04a715e4e1210a6ecfcaa0e6ceefde07020710b", "tree": "48bd4a50412788b9a9d68a24c0bf8c1cecf108cd", "parents": [ "f46fc8cd382f318a7d9c6cd0af1b771c74e5dfd0" ], "author": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Sat Aug 14 21:08:53 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Aug 14 21:08:53 2010 +0200" }, "message": "hwmon: Add 4 current alarm/beep attributes to sysfs-interface\n\nAdd currX_alarm, currX_min_alarm, currX_max_alarm and currX_beep\nattributes to the hwmon sysfs API.\n\ncurrX_min_alarm and currX_max_alarm are already supported by the LTC4215\nand LTC4245 drivers. currX_alarm is supported by the LTC4261 driver.\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "f46fc8cd382f318a7d9c6cd0af1b771c74e5dfd0", "tree": "3ec6a8c0310d7532cb59f9c9efbbeab427f069b6", "parents": [ "28cbd461f022e30dba555926b76625a35e194166" ], "author": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Sat Aug 14 21:08:52 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Aug 14 21:08:52 2010 +0200" }, "message": "hwmon: Add 3 critical limit attributes to sysfs-interface\n\nAdded _lcrit and _crit to voltage attributes. \nAdded _lcrit to temperature attributes.\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "5950ec8d3e47a08ec0b678a0e0ba5d1b9b62dd8e", "tree": "8cac7d3dadf50be14b2ac0441e61ecd8935f27e0", "parents": [ "b9783dcebe952bf73449fe70a19ee4814adc81a0" ], "author": { "name": "Ira W. Snyder", "email": "iws@ovro.caltech.edu", "time": "Sat Aug 14 21:08:49 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Aug 14 21:08:49 2010 +0200" }, "message": "hwmon: (ltc4245) Expose all GPIO pins as analog voltages\n\nAdd support for exposing all GPIO pins as analog voltages. Though this is\nnot an ideal use of the chip, some hardware engineers may decide that the\nLTC4245 meets their design requirements when studying the datasheet.\n\nThe GPIO pins are sampled in round-robin fashion, meaning that a slow\nreader will see stale data. A userspace application can detect this,\nbecause it will get -EAGAIN when reading from a sysfs file which contains\nstale data.\n\nUsers can choose to use this feature on a per-chip basis by using either\nplatform data or the OF device tree (where applicable).\n\nSigned-off-by: Ira W. Snyder \u003ciws@ovro.caltech.edu\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "7721fea3d0fd93fb4d000eb737b444369358d6d3", "tree": "82584339f492a2d771a67924209871c81e3ec9c7", "parents": [ "6b8e8282611ea35845dcff0cb321a7d735fc3155" ], "author": { "name": "Giel van Schijndel", "email": "me@mortis.eu", "time": "Mon Aug 09 17:21:13 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Aug 09 20:45:10 2010 -0700" }, "message": "hwmon: f71882fg: add support for the Fintek F71808E\n\nAllow device probing to recognise the Fintek F71808E.\n\nSysfs interface:\n * Fan/pwm control is the same as for F71889FG\n * Temperature and voltage sensor handling is largely the same as for\n the F71889FG\n - Has one temperature sensor less (doesn\u0027t have temp3)\n - Misses one voltage sensor (doesn\u0027t have V6, thus in6_input refers to\n what in7_input refers for F71889FG)\n\nFor the purpose of the sysfs interface fxxxx_in_temp_attr[] is split up\nsuch that it can largely be reused.\n\nSigned-off-by: Giel van Schijndel \u003cme@mortis.eu\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nCc: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "f3cffe4d1a20208da9bf2c9cc0a973bf091eb160", "tree": "f79f587b6300f4b7bced1ac7df31df4d99cd27e6", "parents": [ "851b29cb3b196cb66452ec964ab5f66c9c9cd1ed" ], "author": { "name": "Chen Gong", "email": "gong.chen@linux.intel.com", "time": "Mon Aug 09 17:21:10 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Aug 09 20:45:10 2010 -0700" }, "message": "hwmon: coretemp: documentation update and cleanup\n\nUpdate coretemp supported CPU TjMax lists and some cleanup work.\n\nSigned-off-by: Chen Gong \u003cgong.chen@linux.intel.com\u003e\nCc: Rudolf Marek \u003cr.marek@assembler.cz\u003e\nCc: Huaxu Wan \u003chuaxu.wan@intel.com\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "4453d7364d3b1f92475f104d4625abee36a7733d", "tree": "4bd0ffc39d5d0ca38447e62d956cee60fe15ee1f", "parents": [ "920fa1ffce48d36d7e7bc54eb38c58313bc0a667" ], "author": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Mon Aug 09 17:21:08 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Aug 09 20:45:10 2010 -0700" }, "message": "hwmon: add support for JEDEC JC 42.4 compliant temperature sensors\n\n[akpm@linux-foundation.org: coding-style fixes]\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Randy Dunlap \u003crdunlap@xenotime.net\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nCc: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "920fa1ffce48d36d7e7bc54eb38c58313bc0a667", "tree": "ca8105f753fa0e0eae008de6b0d383c2ad1294d0", "parents": [ "cfa3b24c38b58cb6acabe6441b4668e530e957af" ], "author": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Mon Aug 09 17:21:06 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Aug 09 20:45:10 2010 -0700" }, "message": "hwmon: driver for SMM665 Six-Channel Active DC Output Controller/Monitor\n\nThis driver adds support for the monitoring features of the Summit\nMicroelectronics SMM665 Six-Channel Active DC Output Controller/Monitor.\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nAcked-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nCc: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nCc: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "a5e11599da95fbe8425db0cfd01a581d7412d0c9", "tree": "45fccb4b27a1068cec8dc8283260893b60ca46d2", "parents": [ "0f477dd0851bdcee82923da66a7fc4a44cb1bc3d", "a3159864f2978bf2ace9cc787d73d315c98bbf9a" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Aug 06 10:02:58 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Aug 06 10:02:58 2010 -0700" }, "message": "Merge branch \u0027x86-hwmon-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027x86-hwmon-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n x86, hwmon: Package Level Thermal/Power: pkgtemp documentation\n x86, hwmon: Package Level Thermal/Power: power limit\n x86, hwmon: Package Level Thermal/Power: thermal throttling handler\n x86, hwmon: Package Level Thermal/Power: pkgtemp hwmon driver\n" }, { "commit": "0ea6e61122196509af82cc4f36cbdaacbefb8227", "tree": "1e6e65d3b73c9c620497966b1786f163a1782228", "parents": [ "d790d4d583aeaed9fc6f8a9f4d9f8ce6b1c15c7f" ], "author": { "name": "Justin P. Mattock", "email": "justinmattock@gmail.com", "time": "Fri Jul 23 20:51:24 2010 -0700" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Wed Aug 04 15:21:40 2010 +0200" }, "message": "Documentation: update broken web addresses.\n\nBelow you will find an updated version from the original series bunching all patches into one big patch\nupdating broken web addresses that are located in Documentation/*\nSome of the addresses date as far far back as 1995 etc... so searching became a bit difficult,\nthe best way to deal with these is to use web.archive.org to locate these addresses that are outdated.\nNow there are also some addresses pointing to .spec files some are located, but some(after searching\non the companies site)where still no where to be found. In this case I just changed the address\nto the company site this way the users can contact the company and they can locate them for the users.\n\nSigned-off-by: Justin P. Mattock \u003cjustinmattock@gmail.com\u003e\nSigned-off-by: Thomas Weber \u003cweber@corscience.de\u003e\nSigned-off-by: Mike Frysinger \u003cvapier.adi@gmail.com\u003e\nCc: Paulo Marques \u003cpmarques@grupopie.com\u003e\nCc: Randy Dunlap \u003crdunlap@xenotime.net\u003e\nCc: Michael Neuling \u003cmikey@neuling.org\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "a3159864f2978bf2ace9cc787d73d315c98bbf9a", "tree": "c7662d6b515667957a39bfab079b05766dbbb387", "parents": [ "0199114c31798af5b83841b21759b64171060d9b" ], "author": { "name": "Fenghua Yu", "email": "fenghua.yu@intel.com", "time": "Thu Jul 29 17:13:46 2010 -0700" }, "committer": { "name": "H. Peter Anvin", "email": "hpa@linux.intel.com", "time": "Tue Aug 03 15:58:56 2010 -0700" }, "message": "x86, hwmon: Package Level Thermal/Power: pkgtemp documentation\n\nDocument for package level thermal hwmon driver.\n\nSigned-off-by: Fenghua Yu \u003cfenghua.yu@intel.com\u003e\nLKML-Reference: \u003c1280448826-12004-6-git-send-email-fenghua.yu@intel.com\u003e\nReviewed-by: Len Brown \u003clen.brown@intel.com\u003e\nSigned-off-by: H. Peter Anvin \u003chpa@linux.intel.com\u003e\n" }, { "commit": "a2531293dbb7608fa672ff28efe3ab4027917a2f", "tree": "017d5a38fa33838ebdca1a332db6887096885d2d", "parents": [ "7a53cd16d4d9968d1962e378b14eec2d99aa43e0" ], "author": { "name": "Pavel Machek", "email": "pavel@ucw.cz", "time": "Sun Jul 18 14:27:13 2010 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Mon Jul 19 10:56:54 2010 +0200" }, "message": "update email address\n\npavel@suse.cz no longer works, replace it with working address.\n\nSigned-off-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "df16dd53c575d0cb9dbee20a3149927c862a9ff6", "tree": "767244e8aaa1d9bcb996e4fc83637eb100ff7868", "parents": [ "ea694431f9c862bd409c90ba1cb3bdc6fdde8635" ], "author": { "name": "Ira W. Snyder", "email": "iws@ovro.caltech.edu", "time": "Thu May 27 19:59:02 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu May 27 19:59:02 2010 +0200" }, "message": "hwmon: (ltc4245) Read only one GPIO pin\n\nRead only one of the GPIO pins as an analog voltage. The ADC can be\nswitched to a different GPIO pin at runtime, but this is not supported.\n\nPreviously, this driver would report the analog voltage of the currently\nselected GPIO pin as all three GPIO voltages: in9_input, in10_input and\nin11_input.\n\nSigned-off-by: Ira W. Snyder \u003ciws@ovro.caltech.edu\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: stable@kernel.org\n" }, { "commit": "ea694431f9c862bd409c90ba1cb3bdc6fdde8635", "tree": "702ee926abff58b9896220ce02e4592b13978005", "parents": [ "38806bda6b7c8473c47a967a514260c1a1c32c2e" ], "author": { "name": "Juerg Haefliger", "email": "juergh@gmail.com", "time": "Thu May 27 19:59:01 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu May 27 19:59:01 2010 +0200" }, "message": "hwmon: (dme1737) Add SCH5127 support\n\nAdd support for the hardware monitoring capabilities of the SCH5127\nchip to the dme1737 driver.\n\nSigned-off-by: Juerg Haefliger \u003cjuergh@gmail.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nTested-by: Jeff Rickman \u003cjrickman@myamigos.us\u003e\n" }, { "commit": "cff37c9e82e022068840b3d33167e64c6a0ecc06", "tree": "8ebce4d6d8cbc16a661e6548515d02f43d66ad58", "parents": [ "beb1b6bbf2b448b97b9611200eb4b5a555336c60" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu May 27 19:58:57 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu May 27 19:58:57 2010 +0200" }, "message": "hwmon: (tmp102) Various fixes\n\nFixes from my driver review:\nhttp://lists.lm-sensors.org/pipermail/lm-sensors/2010-March/028051.html\n\nOnly the small changes are in there, more important changes will come\nlater separately as time permits.\n\n* Drop the remnants of the now gone detect function\n* The TMP102 has no known compatible chip\n* Include the right header files\n* Clarify why byte swapping of register values is needed\n* Strip resolution info bit from temperature register value\n* Set cache lifetime to 1/3 second\n* Don\u0027t arbitrarily reject limit values; clamp as needed\n* Make limit writing unconditional\n* Don\u0027t check for transaction types the driver doesn\u0027t use\n* Properly check for error when setting configuration\n* Report error on failed probe\n* Make the driver load automatically where needed\n* Various other minor fixes\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Steven King \u003csfking@fdwdc.com\u003e\n" }, { "commit": "beb1b6bbf2b448b97b9611200eb4b5a555336c60", "tree": "ff20c6fe10e2ef0f29e5fe0f21caf1fcff5236d6", "parents": [ "dac6831e67e90d1cee430a66e7390e753c20d835" ], "author": { "name": "Steven King", "email": "sfking@fdwdc.com", "time": "Thu May 27 19:58:56 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu May 27 19:58:56 2010 +0200" }, "message": "hwmon: Driver for TI TMP102 temperature sensor\n\nDriver for the TI TMP102.\n\nThe TI TMP102 is similar to the LM75. It differs from the LM75 by\nhaving a 16-bit conf register and the temp registers have a minimum\nresolution of 12 bits; the extended conf register can select 13-bit\nresolution (which this driver does) and also change the update rate\n(which this driver currently doesn\u0027t use).\n\n[JD: Fix tmp102_exit tag, must be __exit, not __init.]\n\nSigned-off-by: Steven King \u003csfking@fdwdc.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "d2b847d489ee4e9921bc61f47c3d0e992692fc0f", "tree": "07c583b26ab1e3a27a9b1ecbf84325e9a26ce57e", "parents": [ "8c3c7a256f7ab142dfbcee2d8633dbce5a36fde7" ], "author": { "name": "Ira W. Snyder", "email": "iws@ovro.caltech.edu", "time": "Thu May 27 19:58:45 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu May 27 19:58:45 2010 +0200" }, "message": "hwmon: Add description of the update_rate sysfs attribute\n\nThe update_rate attribute can be used by drivers to let userspace choose\nthe update rate of the chip, if it is configurable.\n\nSigned-off-by: Ira W. Snyder \u003ciws@ovro.caltech.edu\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "10f2ed31aae11040dfd64cee10c47db79b4b4647", "tree": "bae22e065d19fba90db1f25c976166d742dd086e", "parents": [ "70dd6beac02f43a5099fcf5fddf68cfee0cbf479" ], "author": { "name": "Matthew Garrett", "email": "mjg@redhat.com", "time": "Thu May 27 19:58:38 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu May 27 19:58:38 2010 +0200" }, "message": "hwmon: (lm63) Add basic support for LM64\n\nThe LM64 appears to be an LM63 with added GPIO lines. Add support for the\nhwmon functionality - GPIO can be added at some later stage if someone\nhas a need for them.\n\nSigned-off-by: Matthew Garrett \u003cmjg@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "a33f32244d8550da8b4a26e277ce07d5c6d158b5", "tree": "2b24b891e48ae791446fef6d1b9e520190c03c62", "parents": [ "6c9468e9eb1252eaefd94ce7f06e1be9b0b641b1" ], "author": { "name": "Francis Galiegue", "email": "fgaliegue@gmail.com", "time": "Fri Apr 23 00:08:02 2010 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Fri Apr 23 02:09:52 2010 +0200" }, "message": "Documentation/: it\u0027s -\u003e its where appropriate\n\nFix obvious cases of \"it\u0027s\" being used when \"its\" was meant.\n\nSigned-off-by: Francis Galiegue \u003cfgaliegue@gmail.com\u003e\nAcked-by: Randy Dunlap \u003crdunlap@xenotime.net\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "318ae2edc3b29216abd8a2510f3f80b764f06858", "tree": "ce595adde342f57f379d277b25e4dd206988a052", "parents": [ "25cf84cf377c0aae5dbcf937ea89bc7893db5176", "3e58974027b04e84f68b964ef368a6cd758e2f84" ], "author": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Mon Mar 08 16:55:37 2010 +0100" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Mon Mar 08 16:55:37 2010 +0100" }, "message": "Merge branch \u0027for-next\u0027 into for-linus\n\nConflicts:\n\tDocumentation/filesystems/proc.txt\n\tarch/arm/mach-u300/include/mach/debug-macro.S\n\tdrivers/net/qlge/qlge_ethtool.c\n\tdrivers/net/qlge/qlge_main.c\n\tdrivers/net/typhoon.c\n" }, { "commit": "a0a5e3488a51c46f383c5faa86b53828e30ce153", "tree": "be2df675c0fb15d477591d946ef6200cfecdfe69", "parents": [ "dc71afe5ac7e8d049bb991330518e4c898a7d92e" ], "author": { "name": "Amerigo Wang", "email": "amwang@redhat.com", "time": "Fri Mar 05 22:17:26 2010 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Mar 05 22:17:26 2010 +0100" }, "message": "hwmon: Remove the deprecated adt7473 driver\n\nadt7473 driver is obsoleted by adt7475 driver. And it is scheduled\nto be removed in Feb 2010.\n\nSigned-off-by: WANG Cong \u003camwang@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "d58de038728221f780e11d50b32aa40d420c1150", "tree": "270bbb4ca00bed94782dee9d18846edee4db2df0", "parents": [ "232449850229deeda84194e8a3c93a49ab6a043e" ], "author": { "name": "George Joseph", "email": "george.joseph@fairview5.com", "time": "Fri Mar 05 22:17:25 2010 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Mar 05 22:17:25 2010 +0100" }, "message": "hwmon: Driver for Andigilog aSC7621 family monitoring chips\n\nHwmon driver for Andigilog aSC7621 family monitoring chips.\n\nSigned-off-by: George Joseph \u003cgeorge.joseph@fairview5.com\u003e\nAcked-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "d84ca5b345c2b77ebf053d534ada6af2332a43b6", "tree": "6ed7d8e10828692cf6512255e08aae7036485785", "parents": [ "5852f9609d21794c45964129b03365883150a6d0" ], "author": { "name": "Wolfram Sang", "email": "w.sang@pengutronix.de", "time": "Fri Mar 05 22:17:23 2010 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Mar 05 22:17:23 2010 +0100" }, "message": "hwmon: Add driver for ADT7411 voltage and temperature sensor\n\nAdd basic support for the ADT7411. Reads out all conversion results (via I2C,\nSPI yet missing) and allows some on-the-fly configuration. Tested with a\ncustom board.\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Wolfram Sang \u003cw.sang@pengutronix.de\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "cccfc9c4bb3c7888f8249b36e08d6e115238c613", "tree": "acff09833d8e7fd1b87efb27394860ea398dcaa9", "parents": [ "4f3f51bc21d434f8d91a79438a1957ec0baa9e30" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Mar 05 22:17:21 2010 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Mar 05 22:17:21 2010 +0100" }, "message": "hwmon: (it87) Validate auto pwm settings\n\nBefore switching to automatic fan control mode, make sure that all the\ntrip points make sense. Otherwise, the control loop could lead to\nweird fan behavior.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "4f3f51bc21d434f8d91a79438a1957ec0baa9e30", "tree": "b61b17498c2b3a46377692526f56551681d1894d", "parents": [ "404a552d8ae6847ae17f3c749bd5d312da08efe4" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Mar 05 22:17:21 2010 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Mar 05 22:17:21 2010 +0100" }, "message": "hwmon: (it87) Add support for old automatic fan speed control\n\nAdd support for the automatic fan speed control interface as\nimplemented by IT8705F chips up to revision F and IT8712F chips up to\nrevision G. This implementation fits very well in our standard sysfs\ninterface.\n\nI implemented the old and not the new interface because the only chip\nI have at hand is an old one, and the new interface is more difficult\nto map to the standard sysfs interface. Adding support later should be\npossible though, if someone with a supported chip is interested.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "404a552d8ae6847ae17f3c749bd5d312da08efe4", "tree": "5374cbae9bae31e14733b2ed5c98bb7746f4cc36", "parents": [ "d624870ffe6e13df94671be9a0e0e2fb001f1bef" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Mar 05 22:17:21 2010 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Mar 05 22:17:21 2010 +0100" }, "message": "hwmon: (it87) Drop dead web links in documentation\n\nUnfortunately ITE is no longer publicly providing datasheets for their\nIT87xxF series of chips. They may send them on request if you ask\npolitely.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "d9b327c310030fa80abbbc9eaaca9f1a6228dbf3", "tree": "43e98a7e1080d9fb1d0586796c4f272dd5b2b530", "parents": [ "6a8d7acfbef8ac6bf34421eae980f903cbe36874" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Mar 05 22:17:17 2010 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Mar 05 22:17:17 2010 +0100" }, "message": "hwmon: (it87) Add support for beep on alarm\n\nThe IT87xxF chips support beeping on alarm, if properly wired and\nconfigured. There is one control bit for each input type (temperature,\nfan, voltage.) Let the user see and change them.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "53de33427fa3d7dd62cc5ec75ce0d4e6c6d602dd", "tree": "82a1fd88a2d132b534fe3df3e2ea536c1b5099ae", "parents": [ "95238364167edaf93ce2890e5f55326b63194851" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Mar 05 22:17:15 2010 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Mar 05 22:17:15 2010 +0100" }, "message": "hwmon: (lm90) Add SMBus alert support\n\nTested successfully with an ADM1032 chip on its evaluation board. It\nshould work fine with all other chips as well.\n\nAt this point this is more of a proof-of-concept, we don\u0027t do anything\nterribly useful on SMBus alert: we simply log the event. But this could\nlater evolve into libsensors signaling so that user-space applications\ncan take an appropriate action.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nCc: Trent Piepho \u003ctpiepho@freescale.com\u003e\n" }, { "commit": "6771ea1fff988651593f78c122bc02e80f5100a0", "tree": "a7583f89769b553d7d8bbba42d30687043cd4a35", "parents": [ "64ba9926759792cf7b95f823402e2781edd1b5d4" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Mar 05 22:17:13 2010 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Mar 05 22:17:13 2010 +0100" }, "message": "hwmon: (lm90) Add support for the Winbond/Nuvoton W83L771AWG/ASG\n\nThis chips is found on several Zotac Ion ITX boards, amongst others.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: MC Matti \u003cmcmatti17@googlemail.com\u003e\nCc: Manuel Lamotte-Schubert \u003cmls@pronego.com\u003e\n" }, { "commit": "3ad2f3fbb961429d2aa627465ae4829758bc7e07", "tree": "f365c513e8f5b477a61336a600ff54f32b7ad6e1", "parents": [ "1537a3638cbf741d3826c1002026cce487a6bee0" ], "author": { "name": "Daniel Mack", "email": "daniel@caiaq.de", "time": "Wed Feb 03 08:01:28 2010 +0800" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Feb 09 11:13:56 2010 +0100" }, "message": "tree-wide: Assorted spelling fixes\n\nIn particular, several occurances of funny versions of \u0027success\u0027,\n\u0027unknown\u0027, \u0027therefore\u0027, \u0027acknowledge\u0027, \u0027argument\u0027, \u0027achieve\u0027, \u0027address\u0027,\n\u0027beginning\u0027, \u0027desirable\u0027, \u0027separate\u0027 and \u0027necessary\u0027 are fixed.\n\nSigned-off-by: Daniel Mack \u003cdaniel@caiaq.de\u003e\nCc: Joe Perches \u003cjoe@perches.com\u003e\nCc: Junio C Hamano \u003cgitster@pobox.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "6102c315d896fb020550fb2481613485872978f6", "tree": "d0afc2dca7492c65be45af869b5988053bd92f2d", "parents": [ "a29815a333c6c6e677294bbe5958e771d0aad3fd", "3dd3a156355e7e6bec0dc9a0bbb6eeecbd965d50" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jan 11 09:45:55 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jan 11 09:45:55 2010 -0800" }, "message": "Merge branch \u0027hwmon-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging\n\n* \u0027hwmon-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:\n hwmon: Make PCI device ids constant\n hwmon: (coretemp) Fix TjMax for Atom N450/D410/D510 CPUs\n hwmon: (k10temp) Blacklist more family 10h processors\n hwmon: (asus_atk0110) Add debugfs interface\n hwmon: (asus_atk0110) Refactor interface probe code\n hwmon: (adt7462) Fix pin 28 monitoring\n" }, { "commit": "b5430a04e995081a308b4419bd0940f2badc6e6b", "tree": "47f214dbf6126043fd9f7faa8103a72446734309", "parents": [ "24f3c59e1781435835083eab587399c8bdc235b4" ], "author": { "name": "Tomaz Mertelj", "email": "tomaz.mertelj@guest.arnes.si", "time": "Fri Jan 08 14:43:04 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jan 11 09:34:06 2010 -0800" }, "message": "hwmon: driver for Texas Instruments amc6821 chip\n\nSigned-off-by: \u003ctomaz.mertelj@guest.arnes.si\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "c5114a1cd6d84b2b3144c1c3e093c80ca6c30f47", "tree": "f62563b5f10e2a2328065d4e71f33efa3cdb11be", "parents": [ "7e5eab1128a05b99b8c81c01ff6515a3ca25e5aa" ], "author": { "name": "Clemens Ladisch", "email": "clemens@ladisch.de", "time": "Sun Jan 10 20:52:34 2010 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Jan 10 20:52:34 2010 +0100" }, "message": "hwmon: (k10temp) Blacklist more family 10h processors\n\nThe latest version of the Revision Guide for AMD Family 10h Processors\nlists two more processor revisions which may be affected by erratum 319.\nChange the blacklisting code to correctly detect those processors, by\nimplementing AMD\u0027s recommended algorithm.\n\nSigned-off-by: Clemens Ladisch \u003cclemens@ladisch.de\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Andreas Herrmann \u003cherrmann.der.user@googlemail.com\u003e\n" }, { "commit": "3c57e89b467d1db6fda74d5c97112c8b9466dd97", "tree": "d826e1bff6ac786adf2ee68c403b011a16448b77", "parents": [ "8bea8672edfca7ec5f661cafb218f1205863b343" ], "author": { "name": "Clemens Ladisch", "email": "clemens@ladisch.de", "time": "Wed Dec 16 21:38:25 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 16 21:38:25 2009 +0100" }, "message": "hwmon: New driver for AMD Family 10h/11h CPUs\n\nThis adds a driver for the internal temperature sensor of AMD Family 10h\nand 11h CPUs.\n\nSigned-off-by: Clemens Ladisch \u003cclemens@ladisch.de\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "e956e6b77054f91580deb81ba6389cc8c8ce67ef", "tree": "943b5e68edb4e505c3957421b48e90aac8057d51", "parents": [ "32496c76b777752ba84b125bebfb0cc498f5602c" ], "author": { "name": "Samu Onkalo", "email": "samu.p.onkalo@nokia.com", "time": "Mon Dec 14 18:01:46 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Dec 15 08:53:36 2009 -0800" }, "message": "lis3: update documentation to match latest changes\n\n[akpm@linux-foundation.org: s/q/g/ (Randy)]\nSigned-off-by: Samu Onkalo \u003csamu.p.onkalo@nokia.com\u003e\nAcked-by: Éric Piel \u003cEric.Piel@tremplin-utc.net\u003e\nCc: Pavel Machek \u003cpavel@ucw.cz\u003e\nCc: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "bc62c1471773fc32adcfc05100abd16fa2b6e126", "tree": "34894261672d0c73c01b46ed92ebad7eb75ea8c4", "parents": [ "66c8569bf990064b3f11e0f211a81a46e0b627ff" ], "author": { "name": "Éric Piel", "email": "eric.piel@tremplin-utc.net", "time": "Mon Dec 14 18:01:39 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Dec 15 08:53:36 2009 -0800" }, "message": "lis3: update documentation and comments\n\nMost of the documentation and comments were written when the driver was\nonly supporting one type of chip, only via ACPI/HP. Update the info to\nthe much clearer understanding that we have now.\n\nSigned-off-by: Éric Piel \u003ceric.piel@tremplin-utc.net\u003e\nSigned-off-by: Samu Onkalo \u003csamu.p.onkalo@nokia.com\u003e\nCc: Pavel Machek \u003cpavel@ucw.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "41e9a062361de204d3710038925ae7f356ebb40d", "tree": "8615207c3c024f8835fe867f18038dca101846b1", "parents": [ "e40d6eaa79bc9d9d347c3c51fe0c9204e9025b79" ], "author": { "name": "Daniel J Blueman", "email": "daniel.blueman@gmail.com", "time": "Mon Dec 14 18:01:37 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Dec 15 08:53:35 2009 -0800" }, "message": "hwmon: w83627ehf updates\n\nAdd control of fan minimum turn-on output levels, decoupling it from the\nfan turn-off output level. Add control of rate of change of fan output\nlevel. These in turn allow lower turn-off rotor speed and smoother\ntransitions for better thermal and acoustic control authority. Add\nsupport for constant fan speed and proportional-response operations modes.\n\n[akpm@linux-foundation.org: coding-style fixes]\nSigned-off-by: Daniel J Blueman \u003cdaniel.blueman@gmail.com\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: David Hubbard \u003cdavid.c.hubbard@gmail.com\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "54fe4671aa5853ca88da72d67e969a3d8de6dcf6", "tree": "d92f5306dc6c2deedf8bb082f9a848f77110258d", "parents": [ "b058b8596136d97b9469366f1f97fb35accf3d66" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:36:08 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:36:08 2009 +0100" }, "message": "hwmon: (adt7475) Add VID support for the ADT7476\n\nThe ADT7476 has 5 dedicated pins for VID input, and the +12V input can\noptionally be used as a 6th VID pin. Add support for VID input.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nCc: Jordan Crouse \u003cjordan@cosmicpenguin.net\u003e\nCc: \"Darrick J. Wong\" \u003cdjwong@us.ibm.com\u003e\n" }, { "commit": "d8d2ee073274ab666282d1942d08f1bb454d715b", "tree": "c36ac0f8a63f3ff83a312c61a19d6dde1d5c34da", "parents": [ "ebfaf1fbb6010204e973e329034d0004d6521503" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:36:08 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:36:08 2009 +0100" }, "message": "hwmon: (adt7475) Add support for the ADT7476\n\nAdd support for the Analog Devices ADT7476 chip. This chip is largely\ncompatible with the ADT7473 and ADT7475, with additional features.\nIn particular, it has 5 voltage inputs instead of 2, and VID input\npins.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nCc: Jordan Crouse \u003cjordan@cosmicpenguin.net\u003e\nCc: \"Darrick J. Wong\" \u003cdjwong@us.ibm.com\u003e\n" }, { "commit": "3d849981711741e76e501e4b9e3e7b792f2b0fd5", "tree": "0948d147f41b9d637cd2b2ef9afb044983dcd59f", "parents": [ "d656b6fde2531a13c4e68a3ce6b9f12bc19d96bb" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:36:05 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:36:05 2009 +0100" }, "message": "hwmon: (adt7475) Add support for the ADT7490\n\nAdd support for the Analog Devices ADT7490 chip. This chip is largely\ncompatible with the ADT7473 and ADT7475, with additional features.\nIn particular, it has 6 voltage inputs instead of 2.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nCc: Jordan Crouse \u003cjordan@cosmicpenguin.net\u003e\nCc: \"Darrick J. Wong\" \u003cdjwong@us.ibm.com\u003e\n" }, { "commit": "f890c6a3b6c3ed06719e696fed9267cc6b40aabd", "tree": "a38fecafe6074c168e6c21cf504ead5afde42be5", "parents": [ "b180d0508475c5c55085839d22f454c69379eacc" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:36:02 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:36:02 2009 +0100" }, "message": "hwmon: (adt7475) New documentation\n\nNew documentation for the adt7475 driver, based on the adt7473 driver\ndocumentation. It is IMHO much more useful that the previous\ndocumentation which was essentially redundant with sysfs-interface.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: \"Mark M. Hoffman\" \u003cmhoffman@lightlink.com\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nCc: Jordan Crouse \u003cjordan@cosmicpenguin.net\u003e\nCc: \"Darrick J. Wong\" \u003cdjwong@us.ibm.com\u003e\n" }, { "commit": "b180d0508475c5c55085839d22f454c69379eacc", "tree": "7c1dfe50aca689ff985a3cba16dd373669b7e894", "parents": [ "7669896f499e1bce5cfb38f2685ff583ecdb24dd" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:36:02 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:36:02 2009 +0100" }, "message": "hwmon: (adt7475) Add support for the ADT7473\n\nAdd support for the ADT7473 to the adt7475 driver, and mark the\nadt7473 driver for removal. The ADT7473 and ADT7475 chips are almost\nthe same chip and essentially compatible, so there\u0027s no point in\nhaving separate drivers for them.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: \"Mark M. Hoffman\" \u003cmhoffman@lightlink.com\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nCc: Jordan Crouse \u003cjordan@cosmicpenguin.net\u003e\nCc: \"Darrick J. Wong\" \u003cdjwong@us.ibm.com\u003e\n" }, { "commit": "7669896f499e1bce5cfb38f2685ff583ecdb24dd", "tree": "ac73a6c61327d36518ebbe9625620de974fa878e", "parents": [ "fc16c56e694d361388bae701894fd719dbc0f7eb" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Wed Dec 09 20:36:01 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:36:01 2009 +0100" }, "message": "hwmon: (f71882fg) Add support for the f71889fg (version 2)\n\nThis adds support for the Fintek f71889fg to the f71882fg driver,\nmany thanks to Gerd v. Egidy for providing (remote) access to a\nmachine which such an ic.\n\nNote that this bit of the patch:\n-\tval \u003d SENSORS_LIMIT(val, 0, 255);\n+\n+\tif (data-\u003etype \u003d\u003d f71889fg)\n+\t\tval \u003d SENSORS_LIMIT(val, -128, 127);\n+\telse\n+\t\tval \u003d SENSORS_LIMIT(val, 0, 127);\n\nChanges behaviour for already supported models, the new behaviour is correct\nas the already supported models have bit 7 of the involved registers fixed at\n0, so the previous behaviour which allowed setting temp zone limits \u003e 127\nwas not correct.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "93ee0a75f6e4b2c7ec20fd8f4ace87f88ba785b9", "tree": "ced868220c593e2cdfbf51edf24368fe8061ce40", "parents": [ "d1ebd59a74d764ab74cda8d09589b7ab5f5529fd" ], "author": { "name": "Luotao Fu", "email": "l.fu@pengutronix.de", "time": "Wed Dec 09 20:35:58 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:35:58 2009 +0100" }, "message": "hwmon: Add Freescale MC13783 ADC driver\n\nThis driver provides support for the ADC integrated into the\nFreescale MC13783 PMIC.\n\nSigned-off-by: Luotao Fu \u003cl.fu@pengutronix.de\u003e\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Uwe Kleine-König \u003cu.kleine-koenig@pengutronix.de\u003e\nReviewed-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nCc: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "8918023d40ebb2c086e77368810763975761cb1b", "tree": "3c4d9eebab32552b0a7d9a896f92897625ab7678", "parents": [ "591ec6509ed888723caf6ac8ced3f6f718625a1f" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:35:48 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:35:48 2009 +0100" }, "message": "hwmon: (w83627hf) Drop the force_addr module parameter\n\nThis module parameter is there to workaround broken BIOS. I\u0027m not even\nsure if it was used in the past 5 years, and it gets in the way of\nconverting the driver to the MFD infrastructure. So tell the users how\nthey can do the same from user-space.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Rodolfo Giometti \u003cgiometti@linux.it\u003e\n" }, { "commit": "895ff267686663afa894314b749d23ac2867434a", "tree": "01e16fe1eef64fcf175853f88cefc04400148e42", "parents": [ "f7290e24e3ce8a0b4b39a74800fd341b6b7a6f47" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:35:47 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:35:47 2009 +0100" }, "message": "hwmon: (it87) Verify the VID pin usage\n\nThe VID input pins can alternatively be used as GPIOs. Make sure we\nhave at least 4 pins used for VID, otherwise don\u0027t bother reading and\nexposing VID.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nTested-by: Adam Nielsen \u003ca.nielsen@shikadi.net\u003e\n" }, { "commit": "f7290e24e3ce8a0b4b39a74800fd341b6b7a6f47", "tree": "985b1e927f88dfee98af6463852fd936f3335af9", "parents": [ "047f4ec29453ad8a785ccab7d8098f28149828e2" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:35:47 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:35:47 2009 +0100" }, "message": "hwmon: Clarify autopwm trip points documentation\n\nDocument the case of hybrid automatic fan speed control\nimplementations, where trip points are associated to both PWM output\nchannels and temperature input channels.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "115a57c5b31ab560574fe1a09deaba2ae89e77b5", "tree": "000dbd6e57a5fffc2e0e3e4c1d82a98c00137c53", "parents": [ "46c529cf79f6c7b239f83b4997d676dd5b51908c" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Mon Oct 26 16:50:07 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Oct 29 07:39:30 2009 -0700" }, "message": "hwmon: enhance the sysfs API for power meters\n\nAugment the documentation of the hwmon sysfs API to accomodate ACPI power\nmeters and the current desired behavior of power capping hardware drivers.\n\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nCc: Zhang Rui \u003crui.zhang@intel.com\u003e\nCc: Pavel Machek \u003cpavel@ucw.cz\u003e\nCc: Len Brown \u003clen.brown@intel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "2d2a7cff1b63cde1e2d981eea8ae9e69ae9ce96d", "tree": "73e2422c4d4836c770c6ba0269f1bcf002f9d48b", "parents": [ "0314b020c49c1d6cd182d2b89775bfa6686660db" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Oct 04 22:53:42 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Oct 04 22:53:42 2009 +0200" }, "message": "ltc4215/ltc4245: Discard obsolete detect methods\n\nThere is no point in implementing a detect callback for the LTC4215\nand LTC4245, as these devices can\u0027t be detected. It was there solely\nto handle \"force\" module parameters to instantiate devices, but now\nwe have a better sysfs interface that can do the same.\n\nSo we can get rid of the ugly module parameters and the detect\ncallbacks. This shrinks the binary module sizes by 36% and 46%,\nrespectively.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Ira W. Snyder \u003ciws@ovro.caltech.edu\u003e\n" }, { "commit": "3e56d49390cd161f34cc049a3661045183d276d5", "tree": "0006f1cd2f1b1be6c7149a3234a9ab3ff76c7e80", "parents": [ "c82ffab9a857f8286ed2b559624b7005a367b638", "58f055e5314856a3badfa61fe144347903488989" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Sep 23 15:20:16 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Sep 23 15:20:16 2009 -0700" }, "message": "Merge branch \u0027hwmon-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging\n\n* \u0027hwmon-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:\n hwmon: (ltc4245) Clear faults at startup\n hwmon: (ltc4215) Clear faults at startup\n hwmon: (coretemp) Add Lynnfield CPU\n hwmon: (coretemp) Add support for Penryn mobile CPUs\n hwmon: (coretemp) Fix Atom CPUs support\n hwmon: Delete deprecated FSC drivers\n hwmon: (adm1031) Add sysfs files for temperature offsets\n" }, { "commit": "fa08acd7d16cd7ea8114f3844b0ef2505a4276a8", "tree": "2c02bd54c52c8a7c0354965af194882f8b9252f9", "parents": [ "eccfed42215bebda0acc3158c1a4ff8325dea275" ], "author": { "name": "Huaxu Wan", "email": "huaxu.wan@linux.intel.com", "time": "Wed Sep 23 22:59:43 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Sep 23 22:59:43 2009 +0200" }, "message": "hwmon: (coretemp) Add Lynnfield CPU\n\nAdd Lynnfield processor support. Lynnfield is a quad-core Nehalem\nbased microprocessor for Desktop market, which is introduced in\nSeptember 2009.\n\nSigned-off-by: Huaxu Wan \u003chuaxu.wan@linux.intel.com\u003e\nSigned-off-by: Kent Liu \u003ckent.liu@linux.intel.com\u003e\nAcked-by: Rudolf Marek \u003cr.marek@assembler.cz\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "eccfed42215bebda0acc3158c1a4ff8325dea275", "tree": "2ab0cf4e06f93f8c00ac27f496ccdfc9c0784c03", "parents": [ "708a62bcd5f699756bae81491e64648fbf19e2a4" ], "author": { "name": "Rudolf Marek", "email": "r.marek@assembler.cz", "time": "Wed Sep 23 22:59:42 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Sep 23 22:59:42 2009 +0200" }, "message": "hwmon: (coretemp) Add support for Penryn mobile CPUs\n\nFollowing patch adds support for mobile Penryn CPUs. Intel documents this\npoorly. I asked the Coretemp author for some help. This is totally untested and\nmay not work. Please test!\n\nSigned-off-by: Rudolf Marek \u003cr.marek@assembler.cz\u003e\nCc: Huaxu Wan \u003chuaxu.wan@linux.intel.com\u003e\nCc: Kent Liu \u003ckent.liu@linux.intel.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "708a62bcd5f699756bae81491e64648fbf19e2a4", "tree": "4d56e0d672bcdfe8b1f46980f9e7374e7e729307", "parents": [ "91f17e02a224dc649eaffc8e0bca6db85efb9cd7" ], "author": { "name": "Rudolf Marek", "email": "r.marek@assembler.cz", "time": "Wed Sep 23 22:59:42 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Sep 23 22:59:42 2009 +0200" }, "message": "hwmon: (coretemp) Fix Atom CPUs support\n\nFix Atom CPUs support. Intel documents TjMax at 90 degrees C but\nsome Atoms may have 125 degrees C (this is undocumented speculation).\n\nSigned-off-by: Rudolf Marek \u003cr.marek@assembler.cz\u003e\nCc: Huaxu Wan \u003chuaxu.wan@linux.intel.com\u003e\nCc: Kent Liu \u003ckent.liu@linux.intel.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "91f17e02a224dc649eaffc8e0bca6db85efb9cd7", "tree": "5f538b6afab29f1e63cabdfa42a93d9a14e9d4d8", "parents": [ "49dc9efed05ad3e49000097ce1ec31cd3bbc909b" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Sep 23 22:59:42 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Sep 23 22:59:42 2009 +0200" }, "message": "hwmon: Delete deprecated FSC drivers\n\nThe legacy fscpos and fscher drivers have been replaced by the unified\nfschmd driver. The transition period is over now, we can delete them.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Hans de Goede \u003chdegoede@redhat.com\u003e\n" }, { "commit": "c11f6c82581e8be4e1829c677db54e7f55cebece", "tree": "1a116241b0831ded998aabe800bdc24104cbd826", "parents": [ "40aba218969914d1b225e742617adb921cf94eae", "193a6dec1c0246a80b6d0101e4f351ccf877bcac" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Sep 23 09:32:11 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Sep 23 09:32:11 2009 -0700" }, "message": "Merge branch \u0027release\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6\n\n* \u0027release\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (119 commits)\n ACPI: don\u0027t pass handle for fixed hardware notifications\n ACPI: remove null pointer checks in deferred execution path\n ACPI: simplify deferred execution path\n acerhdf: additional BIOS versions\n acerhdf: convert to dev_pm_ops\n acerhdf: fix fan control for AOA150 model\n thermal: add missing Kconfig dependency\n acpi: switch /proc/acpi/{debug_layer,debug_level} to seq_file\n hp-wmi: fix rfkill memory leak on unload\n ACPI: remove unnecessary #ifdef CONFIG_DMI\n ACPI: linux/acpi.h should not include linux/dmi.h\n hwmon driver for ACPI 4.0 power meters\n topstar-laptop: add new driver for hotkeys support on Topstar N01\n thinkpad_acpi: fix rfkill memory leak on unload\n thinkpad-acpi: report brightness events when required\n thinkpad-acpi: don\u0027t poll by default any of the reserved hotkeys\n thinkpad-acpi: Fix procfs hotkey reset command\n thinkpad-acpi: deprecate hotkey_bios_mask\n thinkpad-acpi: hotkey poll fixes\n thinkpad-acpi: be more strict when detecting a ThinkPad\n ...\n" }, { "commit": "be3990b7efbe8784fe063fb6871a772c0703891a", "tree": "b11207c6eb29a3c9bc381ed16a42c83f8b2713d2", "parents": [ "2bace8b95108746f6123d312f47f5bda4eb17a26" ], "author": { "name": "Frans Pop", "email": "elendil@planet.nl", "time": "Sat Jul 25 21:00:12 2009 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Mon Sep 21 15:14:57 2009 +0200" }, "message": "trivial: doc: hpfall: accept disk device to unload as argument\n\nAllows users who use an IDE driver for their disk to use hpfall without\nhaving to modify the source. By default /dev/sda is used.\nSuggested by Christian Thaeter in http://lkml.org/lkml/2009/3/25/505.\n\nWhile we\u0027re add it, improve error message if opening /dev/freefall fails.\n\nSigned-off-by: Frans Pop \u003celendil@planet.nl\u003e\nCc: Christian Thaeter \u003cct@pipapo.org\u003e\nAcked-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "2bace8b95108746f6123d312f47f5bda4eb17a26", "tree": "b6db4a0a0c1aa9c261e4adaeb4dcae5ed7ff4350", "parents": [ "8103b5cc6216d461047514d188248bd14873624a" ], "author": { "name": "Christian Thaeter", "email": "ct@pipapo.org", "time": "Sat Jul 25 20:55:15 2009 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Mon Sep 21 15:14:57 2009 +0200" }, "message": "trivial: doc: hpfall: reduce risk that hpfall can do harm\n\nImprove the example code to be at least useable, as in not causing\nharm (as shown below). Code can still be improved further, but this\nadds some basic safeguards.\n\n1. hpfall *MUST* mlockall(MCL_CURRENT|MCL_FUTURE); itself!\nSince the Program sits and waits most of the time it becomes very likely\nswapped out. If it gets woken up when the laptop drops from the table\nwhile it is swapped out it actually triggers harddrive activity!\n\n2. Daemonize hpfall using \u0027daemon(0,0)\u0027 (quick and dirty).\n\n3. Give hpfall realtime priority.\nShould give a chance that it has less latency when woken up.\n\nSigned-off-by: Christian Thaeter \u003cct@pipapo.org\u003e\nSigned-off-by: Frans Pop \u003celendil@planet.nl\u003e\nAcked-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "fd589a8f0a13f53a2dd580b1fe170633cf6b095f", "tree": "942c50188ca58041b0453189e710eafcfebaea57", "parents": [ "4f37940d64a155c025968118849b596f6aaa8128" ], "author": { "name": "Anand Gadiyar", "email": "gadiyar@ti.com", "time": "Thu Jul 16 17:13:03 2009 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Mon Sep 21 15:14:55 2009 +0200" }, "message": "trivial: fix typo \"to to\" in multiple files\n\nSigned-off-by: Anand Gadiyar \u003cgadiyar@ti.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "b519c15d4aacb3706bfff86ba316f9ed81b5032a", "tree": "71d061e5dab05645667dd93a32859c462abb6230", "parents": [ "cf83011d8faec99de51d6ba8879c0c61cf31e836" ], "author": { "name": "Frans Pop", "email": "elendil@planet.nl", "time": "Mon Jun 22 11:08:36 2009 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Mon Sep 21 15:14:52 2009 +0200" }, "message": "trivial: cleanup hpfall example code (checkpatch)\n\nThis patch makes hpfall.c conform to kernel coding style.\n\nI have not fixed the C99 // comments on two lines as they\nhelp indicate that those are not actually comments but\nincomplete code.\n\nBefore:\n total: 10 errors, 6 warnings, 101 lines checked\nAfter:\n total: 2 errors, 0 warnings, 99 lines checked\n\nSigned-off-by: Frans Pop \u003celendil@planet.nl\u003e\nAcked-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "44396a262286d1a07216a7c7792d4ed7a4c89ea7", "tree": "f041f625e231879050caafb100dfffae5dffd152", "parents": [ "89ae400e3f57c9d60cd4da3501bb09c1502b723c", "de584afa5e188a2da484bb5373d449598cdb9f5e" ], "author": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Sat Sep 19 02:10:22 2009 -0400" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Sat Sep 19 02:10:22 2009 -0400" }, "message": "Merge branch \u0027power-meter\u0027 into release\n" }, { "commit": "de584afa5e188a2da484bb5373d449598cdb9f5e", "tree": "629dce13dc9c6f5160cf4515a11965d88feb9ef5", "parents": [ "74fca6a42863ffacaf7ba6f1936a9f228950f657" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Fri Sep 18 12:41:09 2009 -0700" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Sat Sep 19 01:30:01 2009 -0400" }, "message": "hwmon driver for ACPI 4.0 power meters\n\nThis driver exposes ACPI 4.0 compliant power meters as hardware monitoring\ndevices. This second revision of the driver also exports the ACPI string\ninfo as sysfs attributes, a list of the devices that the meter measures,\nand will send ACPI notifications over the ACPI netlink socket. This\nlatest revision only enables the power capping controls if it can be\nconfirmed that the power cap can be enforced by the hardware and explains\nhow the notification interfaces work.\n\n[akpm@linux-foundation.org: remove default-y]\n[akpm@linux-foundation.org: build fix]\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nCc: Zhang Rui \u003crui.zhang@intel.com\u003e\nCc: Pavel Machek \u003cpavel@ucw.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "6f130478e24d810078c3f0ee292bcc4ec034dcce", "tree": "1c782ccceaf998e9e23862094588c125ee6f38af", "parents": [ "6f128fa344833bf8bf076a51d14401661c146470", "75f2ba8f0006440e720e47ae14c917e07c452d72" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 09:22:36 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 09:22:36 2009 -0700" }, "message": "Merge branch \u0027for-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6\n\n* \u0027for-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (55 commits)\n regulator: Voltage count for AB3100\n mfd: Convert WM8350 to use request_threaded_irq()\n mfd: Update MAINTAINERS patterns for WM831x\n mfd: Fix twl4030-power warnings\n regulator: AB3100 support\n rtc: AB3100 RTC support\n mfd: Fix ab3100-otp build failure\n mfd: OMAP: Board-specifc twl4030 DPS scripts for RX51 board\n mfd: Print warning for twl4030 out-of-order script loading\n mfd: Add support for TWL4030/5030 dynamic power switching\n mfd: AB3100 OTP readout\n regulator: Add Freescale MC13783 driver\n mfd: Add Freescale MC13783 driver\n mfd: AB3100 disable irq nosync\n mfd: AB3100 alter default setting\n mfd: AB3100 propagate error\n mfd: AB3100 accessor function cleanups\n rtc: Add support for RTCs on Wolfson WM831x devices\n regulator: get pcap data from the parent device\n input: PCAP2 misc input driver\n ...\n" }, { "commit": "08bad5a821371548942aa13565831f18fe1875f3", "tree": "9b689f0bc2ab63700909b9b3af19cee0c7aa1dbd", "parents": [ "e4b736f18f338daae141325c818187c4ab3e244c" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Tue Jul 28 15:52:22 2009 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:47:02 2009 +0200" }, "message": "hwmon: WM831x PMIC hardware monitoring driver\n\nThis driver adds support for the hardware monitoring features of\nthe WM831x PMICs to the hwmon API. Monitoring is provided for\nthe system voltages supported natively by the WM831x, the chip\ntemperature, the battery temperature and the auxiliary inputs\nof the WM831x.\n\nCurrently no alarms are supported, though digital comparators on\nthe WM831x devices would allow these to be provided.\n\nSince the auxiliary and battery temperature input scaling depends\non the system configuration the value is reported as a voltage to\nuserspace.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "fb6c023a2b845df1ec383b74644ac35a4bbb76b6", "tree": "dbb8acdaa37c8ce80ee702a55f672476b6e45444", "parents": [ "39b1772a24126d74699cea623f96b50ca6b6f08f" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Mon Jul 20 12:43:45 2009 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:46:51 2009 +0200" }, "message": "hwmon: Add WM835x PMIC hardware monitoring driver\n\nThis driver provides reporting of the status supply voltage rails\nof the WM835x series of PMICs via the hwmon API.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "afc31875fa5774dbc117f8c62034d77390156edc", "tree": "ad0dcd20f7cc78282495dd8e2962a2d0e77fa056", "parents": [ "61cba5c244bd52e91c01e9f79abba30e54f68dd8" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Sep 15 17:18:14 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Sep 15 17:18:14 2009 +0200" }, "message": "hwmon: (pcf8591) Documentation clean-ups\n\nClean up the pcf8591 driver documentation:\n* The PCF8591 chip is now an NXP product.\n* Fix a sysfs path.\n* Fix the name of sysfs attributes.\n* And a few other random fixes.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Aurelien Jarno \u003caurelien@aurel32.net\u003e\n" }, { "commit": "1915fb70fa23230894cd35d98fcac5a168ec5c23", "tree": "24bbad9393c4d58acab0de0b2f5e8e239aec58d9", "parents": [ "9410700b881f867a50dd8dc3204372fd9dccd8f8" ], "author": { "name": "Andre Prendel", "email": "andre.prendel@gmx.de", "time": "Tue Sep 15 17:18:12 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Sep 15 17:18:12 2009 +0200" }, "message": "hwmon: (tmp421) Add documentation\n\nAdd documentation for the tmp421 driver.\n\nSigned-off-by: Andre Prendel \u003candre.prendel@gmx.de\u003e\nAcked-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "09475d32e652fe60901fe8c9cd50f3f6db0c4933", "tree": "895d7f0d2195e6e6902b6fc8f56cdc4228f0913f", "parents": [ "b6858bca8d7bf52e2564cba5a5ed87e1019d3fd9" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Mon Jun 15 18:39:52 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:52 2009 +0200" }, "message": "hwmon: (f71882fg) Add support for the F71858F\n\nAdd support for the hwmon part of the Fintek F71858FG superio IC to the\nf71882fg driver. Many thanks to Jelle de Jong for lending me a motherboard \nwith this superio on it.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "c1e48dce05ff06266cdfd0cba55fc5367cd499a5", "tree": "c46ba5f97e6079bc9c897b50a40e640f88951386", "parents": [ "cd4e96c5dd4a72bdc54ea9981e02465708c204d3" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:50 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:50 2009 +0200" }, "message": "hwmon: (w83627ehf) Add W83627DHG-P support\n\nAdd support for the new incarnation of the Winbond/Nuvoton W83627DHG\nchip known as W83627DHG-P. It is basically the same as the original\nW83627DHG with an additional automatic can speed control mode (not\nsupported by the driver yet.)\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nTested-by: Madhu \u003cmadhu.chinakonda@gmail.com\u003e\n" }, { "commit": "cd4e96c5dd4a72bdc54ea9981e02465708c204d3", "tree": "5dc66f79a41a54bd983cff20d1d1ebb857e6e30e", "parents": [ "fce0758f5990b34af4ffba589b23f25c700beb2f" ], "author": { "name": "Andre Prendel", "email": "andre.prendel@gmx.de", "time": "Mon Jun 15 18:39:49 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:49 2009 +0200" }, "message": "hwmon: (tmp401) Add documentation\n\nDocumentation for the tmp401 driver.\n\nThe documentation describes the tmp401 driver and the supported Texas\nInstruments TMP401 and TMP411 temperature sensor chips.\n\nFurther documentation for new sysfs attributes supported by this\ndriver is added to Documentation/hwmon/sysfs-interface.\n\nSigned-off-by: Andre Prendel \u003candre.prendel@gmx.de\u003e\nAcked-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "8070408b5446232ba6eb6e0809a329da58a6ae52", "tree": "1d50a3a6df79cff77abb390ac5611a093bc4ac17", "parents": [ "cd659fd0d7c91b7830d1fea0c76a640e171d2d43" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Mon Jun 15 18:39:46 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:46 2009 +0200" }, "message": "hwmon: (ibmaem) Automatically load on HC10 blade\n\nEnable auto-probing for the HC10 blade and amend the supported system\nlist.\n\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "d54d462472a16fc07adb53a2fcd6c0c2a9a8dd1d", "tree": "0a8bb5ef786e3d1209af7282e135ba882013e5a2", "parents": [ "39d8bbedb9571a89d638f5b05358f26ab503d7a6" ], "author": { "name": "Christian Engelmayer", "email": "Christian.Engelmayer@frequentis.com", "time": "Mon Jun 01 13:46:50 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 01 13:46:50 2009 +0200" }, "message": "hwmon: Update documentation on fan_max\n\nAdd fan_max description.\n\nAdd fan limit alarm \u0027max_alarm\u0027 to the alarm section.\n\nSigned-off-by: Christian Engelmayer \u003cchristian.engelmayer@frequentis.com\u003e\nAcked-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "3bcfa9e47a7d1be6faef3be6c4b2049e585e2f38", "tree": "7cc0896fb4ee501fb08560adc1747b7e5a7544cf", "parents": [ "6260a4b0521a41189b2c2a8119096c1e21dbdf2c" ], "author": { "name": "Herbert Valerio Riedel", "email": "hvr@gnu.org", "time": "Mon Apr 06 19:00:30 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Apr 07 08:31:03 2009 -0700" }, "message": "hwmon: add support for GMT G760A fan speed PWM controller\n\nThis controller can be found on the D-Link DNS-323 for instance, where\nit is to be configured via static i2c_board_info in the board-specific\nmach-orion/dns323-setup.c; this driver supports only the new-style\ndriver model.\n\nTested-by: Martin Michlmayr \u003ctbm@cyrius.com\u003e\nSigned-off-by: Herbert Valerio Riedel \u003chvr@gnu.org\u003e\nSigned-off-by: Matthew Palmer \u003cmpalmer@debian.org\u003e\nSigned-off-by: Laurie Bradshaw \u003cbradshaw.laurie@googlemail.com\u003e\nSigned-off-by: Martin Michlmayr \u003ctbm@cyrius.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "72f5de92e199f96cfcea125aefc76c138d8c553c", "tree": "ef24990f791801283f520b5f96a4ea1e592bf37b", "parents": [ "061603275814544842e7df77d1157eff18565997" ], "author": { "name": "Ira Snyder", "email": "iws@ovro.caltech.edu", "time": "Tue Mar 31 15:24:29 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Apr 01 08:59:21 2009 -0700" }, "message": "hwmon: Add LTC4215 driver\n\nAdd Linux support for the Linear Technology LTC4215 Hot Swap controller\nI2C monitoring interface.\n\nI have tested the driver with my board, and it appears to work fine. With\nthe power supplies disabled, it reads 11.93V input, 1.93V output, no\ncurrent and no power. With the supplies enabled, it reads 11.93V input,\n11.98V output, no current, no power. I\u0027m not drawing any current at the\nmoment, so this is reasonable. The value in the sense register never\nreads anything except 0, so I expect to get zero from the current and\npower calculations.\n\nI didn\u0027t attempt to support changing any of the chip\u0027s settings or\nenabling the FET. I\u0027m not sure even how to do that and still fit within\nthe hwmon framework. :)\n\nSigned-off-by: Ira W. Snyder \u003ciws@ovro.caltech.edu\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: \"Mark M. Hoffman\" \u003cmhoffman@lightlink.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" } ], "next": "2b872903c5d66bccdf4306a35e3e94d4da8555d3" }