)]}' { "log": [ { "commit": "8efaef4dc842a8a050d10aef30e26220b8995fc3", "tree": "0ec022e5baa25f6397df0273bc8362aa6d85c8ea", "parents": [ "3f348c5d1aaa0b8b2563f50d2d9a0c64e7d649fb" ], "author": { "name": "Gabor Juhos", "email": "juhosg@openwrt.org", "time": "Tue Jan 04 21:28:22 2011 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Tue Jan 18 19:30:27 2011 +0100" }, "message": "SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs\n\nThe Atheros AR71XX/AR724X/AR913X SoCs have a built-in SPI controller. This\npatch implements a driver for that.\n\nSigned-off-by: Gabor Juhos \u003cjuhosg@openwrt.org\u003e\nCc: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nCc: spi-devel-general@lists.sourceforge.net\nAcked-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nCc: linux-mips@linux-mips.org\nCc: Imre Kaloz \u003ckaloz@openwrt.org\u003e\nCc: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nCc: Cliff Holden \u003cCliff.Holden@Atheros.com\u003e\nCc: Kathy Giori \u003cKathy.Giori@Atheros.com\u003e\nPatchwork: https://patchwork.linux-mips.org/patch/1960/\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "5f35765d836befebdfabf745fdbf2e070c887fac", "tree": "1cb86e41253a80d3dc39294e88f3face268957ec", "parents": [ "77e7bc6194655c36d43707ea53b4f86d1f1c8cf5" ], "author": { "name": "Abhilash Kesavan", "email": "a.kesavan@samsung.com", "time": "Wed Jan 12 15:00:23 2011 +0900" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Fri Jan 14 01:01:51 2011 -0700" }, "message": "spi: Enable SPI driver for S5P6440 and S5P6450\n\nThis patch enables the existing S3C64XX series SPI driver for S5P64X0\nand removed dependency on EXPERIMENTAL because we don\u0027t need it now.\n\nv3: Changed dependency of S3C64XX_DMA\nv2: Removed dependency on EXPERIMENTAL\n\nSigned-off-by: Abhilash Kesavan \u003ca.kesavan@samsung.com\u003e\nSigned-off-by: Sangbeom Kim \u003csbkim73@samsung.com\u003e\nAcked-by: Jassi Brar \u003cjassi.brar@samsung.com\u003e\nSigned-off-by: Kukjin Kim \u003ckgene.kim@samsung.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "77e7bc6194655c36d43707ea53b4f86d1f1c8cf5", "tree": "cf29f483e1aed47891c6e04184ff402999b3e6cd", "parents": [ "50c01fc355c6a97c511d58411f9bc0e4b8fc4659" ], "author": { "name": "Yong Shen", "email": "yong.shen@freescale.com", "time": "Tue Jan 11 17:21:53 2011 +0800" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Wed Jan 12 22:50:54 2011 -0700" }, "message": "spi/imx: Add i.MX53 support\n\n1. Change the Kconfig to include i.MX53\n2. add devtype entry for i.MX53\n\nSigned-off-by: Yong Shen \u003cyong.shen@freescale.com\u003e\nAcked-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nAcked-by: Uwe Kleine-König \u003cu.kleine-koenig@pengutronix.de\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "94a544a4e8d05a027613443c529c399c39cc3371", "tree": "edada38e93a958a918b5826eaef173b1b92079d1", "parents": [ "496a2e360a34e1f41c336d23947f800216cb9bdf", "21486af0f34d03b813b023d7a2b887b329f60486" ], "author": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Wed Dec 29 01:05:14 2010 -0700" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Wed Dec 29 01:05:50 2010 -0700" }, "message": "Merge branch \u0027spi\u0027 of git://git.linutronix.de/users/bigeasy/soda into spi/next\n\n* \u0027spi\u0027 of git://git.linutronix.de/users/bigeasy/soda into spi/next\n spi/pxa2xx: register driver properly\n spi/pxa2xx: add support for shared IRQ handler\n spi/pxa2xx: Use define for SSSR_TFL_MASK instead of plain numbers\n arm/pxa2xx: reorgazine SSP and SPI header files\n spi/pxa2xx: Add CE4100 support\n spi/pxa2xx: Consider CE4100\u0027s FIFO depth\n spi/pxa2xx: Add chipselect support for Sodaville\n spi/pxa2xx: Modify RX-Tresh instead of busy-loop for the remaining RX bytes.\n spi/pxa2xx: pass of_node to spi device and set a parent device\n" }, { "commit": "496a2e360a34e1f41c336d23947f800216cb9bdf", "tree": "697a68cc1da218c295072a349edfc3e3f57a7c5e", "parents": [ "5aa68b85951aec91d6a955d1de861325fc9a3ba1", "23ce17adb7fc33a4353abe4b57a03f555cced57b" ], "author": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Wed Dec 29 00:47:29 2010 -0700" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Wed Dec 29 00:47:38 2010 -0700" }, "message": "Merge branch \u0027for-grant\u0027 of git://arago-project.org/git/projects/linux-davinci into spi/next\n\n* \u0027for-grant\u0027 of git://arago-project.org/git/projects/linux-davinci into spi/next\n spi: davinci: fix checkpatch errors\n spi: davinci: whitespace cleanup\n spi: davinci: remove unused variable \u0027pdata\u0027\n spi: davinci: set chip-select mode in SPIDEF only once\n spi: davinci: enable both activation and deactivation of chip-selects\n spi: davinci: remove unnecessary data transmit on CS disable\n spi: davinci: enable GPIO lines to be used as chip selects\n spi: davinci: simplify prescalar calculation\n spi: davinci: remove \u0027wait_enable\u0027 platform data member\n spi: davinci: make chip-slect specific parameters really chip-select specific\n spi: davinci: consolidate setup of SPIFMTn in one function\n spi: davinci: setup chip-select timers values only if timer enabled\n spi: davinci: add support for wait enable timeouts\n spi: davinci: remove unused members of davinci_spi_slave\n spi: davinci: eliminate the single member structure davinci_spi_slave\n spi: davinci: eliminate unnecessary update of davinci_spi-\u003ecount\n spi: davinci: simplify calculation of edma acount value\n spi: davinci: check for NULL buffer pointer before using it\n spi: davinci: remove unnecessary disable of SPI\n spi: davinci: remove unnecessary \u0027count\u0027 variable in driver private data\n spi: davinci: remove unnecessary completion variable initialization\n spi: davinci: remove non-useful interrupt mode support\n spi: davinci: simplify poll mode transfers\n spi: davinci: add support for interrupt mode\n spi: davinci: configure the invariable bits in spipc0 only once\n spi: davinci: remove unnecessary function davinci_spi_bufs_prep()\n spi: davinci: remove unnecessary call to davinci_spi_setup_transfer()\n spi: davinci: do not store DMA channel information per chip select\n spi: davinci: always start transmit DMA\n spi: davinci: do not use temporary buffer if no transmit data provided\n spi: davinci: always start receive DMA\n spi: davinci: use edma_write_slot() to setup EDMA PaRAM slot\n spi: davinci: fix DMA event generation stoppage\n spi: davinci: fix EDMA CC errors at end of transfers\n spi: davinci: handle DMA completion errors correctly\n spi: davinci: remove usage of additional completion variables for DMA\n spi: davinci: let DMA operation be specified on per-device basis\n spi: davinci: remove non-useful \"clk_internal\" platform data\n spi: davinci: enable and power-up SPI only when required\n spi: davinci: setup the driver owner\n spi: davinci: add additional comments\n spi: davinci: add EF Johnson Technologies copyright\n spi: davinci: removed unused #defines\n spi: davinci: remove unnecessary typecast\n spi: davinci: do not treat Tx interrupt being set as error\n spi: davinci: do not allocate DMA channels during SPI device setup\n spi: davinci: remove unnecessary private data member \u0027region_size\u0027\n spi: davinci: shorten variable names\n spi: davinci: kconfig: add manufacturer name to prompt string\n" }, { "commit": "7063c0d942a1af2993531fbe52b4c74c1db818c4", "tree": "fe91b01bd61449849736c47e0a05840fc47a5eb3", "parents": [ "79290a2aa2fd1c179a285218472092475630dc0e" ], "author": { "name": "Feng Tang", "email": "feng.tang@intel.com", "time": "Fri Dec 24 13:59:11 2010 +0800" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Fri Dec 24 01:23:25 2010 -0700" }, "message": "spi/dw_spi: add DMA support\n\ndw_spi driver in upstream only supports PIO mode, and this patch\nwill support it to cowork with the Designware dma controller used\non Intel Moorestown platform, at the same time it provides a general\nframework to support dw_spi core to cowork with dma controllers on\nother platforms\n\nIt has been tested with a Option GTM501L 3G modem and Infenion 60x60\nmodem. To use DMA mode, DMA controller 2 of Moorestown has to be enabled\n\nAlso change the dma interface suggested by Linus Walleij.\n\nAcked-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nSigned-off-by: Feng Tang \u003cfeng.tang@intel.com\u003e\n[Typo fix and renames to match intel_mid_dma renaming]\nSigned-off-by: Vinod Koul \u003cvinod.koul@intel.com\u003e\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "d6ea3df0d470fb9260db93883f97764cf9f0e562", "tree": "277838ea93d6dc0c7d2a05be757dfa1b8bedb619", "parents": [ "8348c259dd6a6019a8fa01b0a3443409480f7b9d" ], "author": { "name": "Sebastian Andrzej Siewior", "email": "bigeasy@linutronix.de", "time": "Wed Nov 24 10:17:14 2010 +0100" }, "committer": { "name": "Sebastian Andrzej Siewior", "email": "bigeasy@linutronix.de", "time": "Wed Dec 01 13:48:30 2010 +0100" }, "message": "spi/pxa2xx: Add CE4100 support\n\nSodaville\u0027s SPI controller is very much the same as in PXA25x. The\ndifference:\n- The RX/TX FIFO is only 4 words deep instead of 16\n- No DMA support\n- The SPI controller offers a CS functionality\n\nSigned-off-by: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\nSigned-off-by: Dirk Brandewie \u003cdirk.brandewie@gmail.com\u003e\n" }, { "commit": "23ce17adb7fc33a4353abe4b57a03f555cced57b", "tree": "8128893fd5a17cc14b97ef6546a44c28eea3c8e5", "parents": [ "212d4b69652171d4474bc9dfc08e829737264632" ], "author": { "name": "Sekhar Nori", "email": "nsekhar@ti.com", "time": "Tue Oct 12 11:58:02 2010 +0530" }, "committer": { "name": "Sekhar Nori", "email": "nsekhar@ti.com", "time": "Thu Nov 18 18:38:38 2010 +0530" }, "message": "spi: davinci: kconfig: add manufacturer name to prompt string\n\nAdd manufacturer name to the Kconfig prompt string and move\nthe controller name to the begining of the prompt.\n\nThis helps locate the driver easily among the list of existing\ndrivers.\n\nWhile at it, also add information about being able to build\nthe driver as module.\n\nTested-By: Brian Niebuhr \u003cbniebuhr@efjohnson.com\u003e\nSigned-off-by: Sekhar Nori \u003cnsekhar@ti.com\u003e\n" }, { "commit": "eae6cb31d890e2860f9ce1b8ba73c27b6005af68", "tree": "c0e7984b6f3a872be3a0deeb088fb402e1e06cd8", "parents": [ "8fd8821b62397f8ddb7bfb23c3246a22770ab2ee" ], "author": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Thu Oct 14 09:32:53 2010 -0600" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Tue Nov 09 21:41:28 2010 -0700" }, "message": "spi/xilinx: merge OF support code into main driver\n\nNow that the of_platform_bus_type has been merged with the platform\nbus type, a single platform driver can handle both OF and non-OF use\ncases. This patch merges the OF support into the platform driver.\n\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nTested-by: Michal Simek \u003cmonstr@monstr.eu\u003e\n" }, { "commit": "8fd8821b62397f8ddb7bfb23c3246a22770ab2ee", "tree": "1c12c696f8b6ad74f9eb3825b41f9b4702a8f077", "parents": [ "91565c4068042b3d8e37e64e393ca105476419bd" ], "author": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Thu Oct 14 09:04:29 2010 -0600" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Tue Nov 09 21:41:27 2010 -0700" }, "message": "spi/xilinx: fold platform_driver support into main body\n\nThis patch merges the platform driver support into the main body of\nxilinx_spi.c in preparation for merging the OF and non-OF support\ncode.\n\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nTested-by: Michal Simek \u003cmonstr@monstr.eu\u003e\n" }, { "commit": "0c03a1dd5bd8a37932ae1d519156172affef22fd", "tree": "dcdbf07d5e226664afdf8ca3d542a4523b0902c1", "parents": [ "f2a443931e6c7616aa023f55ddfdbca8943ab0e9" ], "author": { "name": "Erik Gilling", "email": "konkers@android.com", "time": "Thu Apr 22 15:58:25 2010 -0700" }, "committer": { "name": "Colin Cross", "email": "ccross@android.com", "time": "Thu Oct 21 18:15:05 2010 -0700" }, "message": "spi: add spi_tegra driver\n\nv2 changes:\n from Thierry Reding:\n * add \"select TEGRA_SYSTEM_DMA\" to Kconfig\n from Grant Likely:\n * add oneline description to header\n * inline references to DRIVER_NAME\n * inline references to BUSY_TIMEOUT\n * open coded bytes_per_word()\n * spi_readl/writel -\u003e spi_tegra_readl/writel\n * move transfer validation to spi_tegra_transfer\n * don\u0027t request_mem_region iomem as platform bus does that for us\n * __exit -\u003e __devexit\n\nv3 changes:\n from Russell King:\n * put request_mem_region back int\n from Grant Likely:\n * remove #undef DEBUG\n * add SLINK_ to register bit defines\n * remove unused bytes_per_word\n * make spi_tegra_readl/writel static linine\n * various refactoring for clarity\n * mark err if BSY bit is not cleared after 1000 retries\n * move spinlock to protect setting of RDY bit\n * subsys_initcall -\u003e module_init\n\nv3 changes:\n from Grant Likely:\n * update spi_tegra to use PTR_ERRless dma API\n\nv4 changes:\n from Grant Likely:\n * remove empty spi_tegra_cleanup fucntion\n * allow device ids of -1\n\nSigned-off-by: Erik Gilling \u003ckonkers@android.com\u003e\nAcked-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nCc: Thierry Reding \u003cthierry.reding@avionic-design.de\u003e\nCc: Russell King \u003clinux@arm.linux.org.uk\u003e\n\nspi: tegra: cleanups from upstream review\n\nChange-Id: Icecf7e64efcb39de072a15234ba1faa4bad40d25\nSigned-off-by: Erik Gilling \u003ckonkers@android.com\u003e\n" }, { "commit": "b5153163ed580e00c67bdfecb02b2e3843817b3e", "tree": "b8c878601f07f5df8f694435857a5f3dcfd75482", "parents": [ "a8cbf22559ceefdcdfac00701e8e6da7518b7e8e", "6451d7783ba5ff24eb1a544eaa6665b890f30466" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Oct 21 16:42:32 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Oct 21 16:42:32 2010 -0700" }, "message": "Merge branch \u0027devel\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm\n\n* \u0027devel\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm: (278 commits)\n arm: remove machine_desc.io_pg_offst and .phys_io\n arm: use addruart macro to establish debug mappings\n arm: return both physical and virtual addresses from addruart\n arm/debug: consolidate addruart macros for CONFIG_DEBUG_ICEDCC\n ARM: make struct machine_desc definition coherent with its comment\n eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free\n cpuimx27: fix compile when ULPI is selected\n mach-pcm037_eet: fix compile errors\n Fixing ethernet driver compilation error for i.MX31 ADS board\n cpuimx51: update board support\n mx5: add cpuimx51sd module and its baseboard\n iomux-mx51: fix GPIO_1_xx \u0027s IOMUX configuration\n imx-esdhc: update devices registration\n mx51: add resources for SD/MMC on i.MX51\n iomux-mx51: fix SD1 and SD2\u0027s iomux configuration\n clock-mx51: rename CLOCK1 to CLOCK_CCGR for better readability\n clock-mx51: factorize clk_set_parent and clk_get_rate\n eukrea_mbimxsd: add support for DVI displays\n cpuimx25 \u0026 cpuimx35: fix OTG port registration in host mode\n i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472\n ...\n" }, { "commit": "8b60d6c25b2a2d3525d5322de856c3ca408e5783", "tree": "2dd4c2c98f9facd87e052795ea79be0c734ec400", "parents": [ "b36ece832512c1a0afa54ff0a56d63492a1caf08" ], "author": { "name": "Mingkai Hu", "email": "Mingkai.hu@freescale.com", "time": "Tue Oct 12 18:18:32 2010 +0800" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Tue Oct 12 21:38:12 2010 -0600" }, "message": "spi/fsl_spi: add eSPI controller support\n\nAdd eSPI controller support based on the library code spi_fsl_lib.c.\n\nThe eSPI controller is newer controller 85xx/Pxxx devices supported.\nThere\u0027re some differences comparing to the SPI controller:\n\n1. Has different register map and different bit definition\n So leave the code operated the register to the driver code, not\n the common code.\n\n2. Support 4 dedicated chip selects\n The software can\u0027t controll the chip selects directly, The SPCOM[CS]\n field is used to select which chip selects is used, and the\n SPCOM[TRANLEN] field is set to tell the controller how long the CS\n signal need to be asserted. So the driver doesn\u0027t need the chipselect\n related function when transfering data, just set corresponding register\n fields to controll the chipseclect.\n\n3. Different Transmit/Receive FIFO access register behavior\n For SPI controller, the Tx/Rx FIFO access register can hold only\n one character regardless of the character length, but for eSPI\n controller, the register can hold 4 or 2 characters according to\n the character lengths. Access the Tx/Rx FIFO access register of the\n eSPI controller will shift out/in 4/2 characters one time. For SPI\n subsystem, the command and data are put into different transfers, so\n we need to combine all the transfers to one transfer in order to pass\n the transfer to eSPI controller.\n\n4. The max transaction length limitation\n The max transaction length one time is limitted by the SPCOM[TRANSLEN]\n field which is 0xFFFF. When used mkfs.ext2 command to create ext2\n filesystem on the flash, the read length will exceed the max value of\n the SPCOM[TRANSLEN] field.\n\nSigned-off-by: Mingkai Hu \u003cMingkai.hu@freescale.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "b36ece832512c1a0afa54ff0a56d63492a1caf08", "tree": "1c8a35d3dd485eb80a56355b5d5cb3bc4b4b2699", "parents": [ "3272029fb33a88873b9b02224ebeb23bf3a4668e" ], "author": { "name": "Mingkai Hu", "email": "Mingkai.hu@freescale.com", "time": "Tue Oct 12 18:18:31 2010 +0800" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Tue Oct 12 21:38:12 2010 -0600" }, "message": "spi/mpc8xxx: refactor the common code for SPI/eSPI controller\n\nRefactor the common code in file spi_fsl_spi.c to spi_fsl_lib.c used\nby SPI/eSPI controller driver as a library, and leave the QE/CPM SPI\ncontroller code in the SPI controller driver spi_fsl_spi.c.\n\nBecause the register map of the SPI controller and eSPI controller\nis so different, also leave the code operated the register to the\ndriver code, not the common code.\n\nSigned-off-by: Mingkai Hu \u003cMingkai.hu@freescale.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "3272029fb33a88873b9b02224ebeb23bf3a4668e", "tree": "5a01a8506285fb418c1334019b5c37575b40c9d7", "parents": [ "492c032beccd53f807811b6c14909630d409dd8c" ], "author": { "name": "Mingkai Hu", "email": "Mingkai.hu@freescale.com", "time": "Tue Oct 12 18:18:30 2010 +0800" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Tue Oct 12 21:38:12 2010 -0600" }, "message": "spi/mpc8xxx: rename spi_mpc8xxx.c to spi_fsl_spi.c\n\nThis will pave the way to refactor out the common code which can be used\nby the eSPI controller driver, and rename the SPI controller dirver to the\nfile spi_fsl_spi.c.\n\nSigned-off-by: Mingkai Hu \u003cMingkai.hu@freescale.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "cdbc8f042f4f2568bb58ba8bd50d0692f3059417", "tree": "2e5ad5e835fb7afa014b0423d173c506e1aba707", "parents": [ "65308c46b760bb2ccb043b47bb5f053dbb8d11b5" ], "author": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Fri Oct 08 12:56:13 2010 -0600" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Tue Oct 12 21:37:37 2010 -0600" }, "message": "spi/topcliff: Tidy up Kconfig help text\n\nThe original didn\u0027t specify Topcliff in the config prompt text.\n\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "e8b17b5b3f30252b5470dbbf54bc251ddc7fac17", "tree": "87792eec89f73e15210938a586abeea061ed12be", "parents": [ "0c92ecf10d9fb80b1798d2a9adfdea17f8f5e6d9" ], "author": { "name": "Masayuki Ohtake", "email": "masa-korg@dsn.okisemi.com", "time": "Fri Oct 08 12:44:49 2010 -0600" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Fri Oct 08 12:44:49 2010 -0600" }, "message": "spi/topcliff: Add topcliff platform controller hub (PCH) spi bus driver\n\nTopcliff PCH is the platform controller hub that is going to be used\nin Intel\u0027s upcoming general embedded platform. All IO peripherals in\nTopcliff PCH are actually devices sitting on AMBA bus. This patch\nadds a driver for the SPI bus integrated into the Topcliff device.\n\nSigned-off-by: Masayuki Ohtake \u003cmasa-korg@dsn.okisemi.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "0b599603d8534bc3946a0f07e461c76d7947dfcf", "tree": "18d5b7a0279f54f2f939b1399aca5f443cbc431f", "parents": [ "3b2aa89eb381d2f445aa3c60d8f070a3f55efa63" ], "author": { "name": "Uwe Kleine-König", "email": "u.kleine-koenig@pengutronix.de", "time": "Thu Sep 09 21:02:48 2010 +0200" }, "committer": { "name": "Sascha Hauer", "email": "s.hauer@pengutronix.de", "time": "Fri Oct 01 09:32:13 2010 +0200" }, "message": "spi/imx: add support for imx51\u0027s eCSPI and CSPI\n\ni.MX51 comes with two eCSPI interfaces (that are quite different from\nwhat was known before---the tried and tested Freescale way) and a CSPI\ninterface that is identical to the devices found on i.MX25 and i.MX35.\n\nThis patch is a merge of two very similar patches (by Jason Wang and Sascha\nHauer resp.) plus a (now hopefully correct) reimplementation of the\nclock calculation.\n\nAcked-by: Jason Wang \u003cjason77.wang@gmail.com\u003e\nAcked-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nSigned-off-by: Uwe Kleine-König \u003cu.kleine-koenig@pengutronix.de\u003e\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\n" }, { "commit": "f4ba6315cb77a5dcff6664ce1d66ebfe31bcc6b1", "tree": "c0c99772309192bf7c5eb120fe7f0ea8af1dc160", "parents": [ "e89524d33deb55de28b4ab171e4b0f89d46b2d4e" ], "author": { "name": "Uwe Kleine-König", "email": "u.kleine-koenig@pengutronix.de", "time": "Thu Sep 09 15:29:01 2010 +0200" }, "committer": { "name": "Sascha Hauer", "email": "s.hauer@pengutronix.de", "time": "Fri Oct 01 09:32:11 2010 +0200" }, "message": "spi/imx: convert driver to use platform ids\n\nThis has the advantage not to need to much cpu_is_... macros. Still more\nwhen imx51 support is added which has two different spi interfaces which\nwould introduce additional checks on the device id.\n\nWith this setup it\u0027s not possible for the compiler anymore to detect the\nunused functions, so four additional kconfig symbols are introduced to\nifdef out the unneeded functions in the callback array and all these\nfunctions are marked with __maybe_unused to suppress the corresponding\ngcc warnings.\n\nComparing the driver footprint with and without the patch for a mx27\nkernel yields:\n\nadd/remove: 2/0 grow/shrink: 2/0 up/down: 280/0 (280)\nfunction old new delta\nspi_imx_devtype - 192 +192\nspi_imx_probe 980 1032 +52\nspi_imx_devtype_data - 32 +32\nspi_imx_setupxfer 276 280 +4\n\nLater when the platform code is updated to use the platform ids, the\nautodetection can be removed which will make the driver a bit smaller\nagain. (~60 Bytes in my test.)\n\nAcked-by: Jason Wang \u003cjason77.wang@gmail.com\u003e\nAcked-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nSigned-off-by: Uwe Kleine-König \u003cu.kleine-koenig@pengutronix.de\u003e\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\n" }, { "commit": "e89524d33deb55de28b4ab171e4b0f89d46b2d4e", "tree": "be991d246d99fd93841274262339e32ba8568578", "parents": [ "77a406da5a5b76445a816d5f043fc9aef4026ff1" ], "author": { "name": "Uwe Kleine-König", "email": "u.kleine-koenig@pengutronix.de", "time": "Thu Sep 09 11:12:12 2010 +0200" }, "committer": { "name": "Sascha Hauer", "email": "s.hauer@pengutronix.de", "time": "Fri Oct 01 09:32:10 2010 +0200" }, "message": "spi/imx: default to m on platforms that have such devices\n\nAcked-by: Jason Wang \u003cjason77.wang@gmail.com\u003e\nAcked-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nSigned-off-by: Uwe Kleine-König \u003cu.kleine-koenig@pengutronix.de\u003e\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\n" }, { "commit": "b1e50ebcf24668e57f058deb48b0704b5391ed0f", "tree": "17e1b69b249d0738317b732186340c9dd053f1a1", "parents": [ "0c2a2ae32793e3500a15a449612485f5d17dd431", "7e125f7b9cbfce4101191b8076d606c517a73066" ], "author": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Tue May 25 00:38:26 2010 -0600" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Tue May 25 00:38:26 2010 -0600" }, "message": "Merge remote branch \u0027origin\u0027 into secretlab/next-spi\n" }, { "commit": "6e27388f1bd60b55e0b1a83d14233e6c7ad33700", "tree": "aab88490ac722b354e90d72a4d0d040acc02f127", "parents": [ "2da8cb6af5fe0d9e16b8a49399c8b7c6cfa94d5a" ], "author": { "name": "Anatolij Gustschin", "email": "agust@denx.de", "time": "Fri Apr 30 13:21:27 2010 +0000" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Tue May 25 00:23:17 2010 -0600" }, "message": "spi/mpc5121: Add SPI master driver for MPC5121 PSC\n\nSigned-off-by: John Rigby \u003cjcrigby@gmail.com\u003e\nSigned-off-by: Anatolij Gustschin \u003cagust@denx.de\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "011f23a3c2f20ae15b7664d3942493af107fe39b", "tree": "b5dbae0b150308b29ea2545c98339532830ee479", "parents": [ "1dcf57ceb461fe2ddeb622fe84d9918aadefe7ba" ], "author": { "name": "Mika Westerberg", "email": "mika.westerberg@iki.fi", "time": "Thu May 06 04:47:04 2010 +0000" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Tue May 25 00:23:16 2010 -0600" }, "message": "spi/ep93xx: implemented driver for Cirrus EP93xx SPI controller\n\nThis patch adds an SPI master driver for the Cirrus EP93xx SPI controller found\nin EP93xx chips.\n\nSigned-off-by: Mika Westerberg \u003cmika.westerberg@iki.fi\u003e\nSigned-off-by: H Hartley Sweeten \u003chsweeten@visionengravers.com\u003e\nAcked-by: H Hartley Sweeten \u003chsweeten@visionengravers.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "8ebeb545a875b1961ede82800711ab31d2ce5782", "tree": "f023eb0bbd89682a35c953febd29363a5f89d0e2", "parents": [ "03e7e170d6fdc5b6f75d1ab2cc1a6cb4f2b6b8c4" ], "author": { "name": "Syed Rafiuddin", "email": "rafiuddin.syed@ti.com", "time": "Fri May 14 12:05:25 2010 -0700" }, "committer": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Thu May 20 11:17:51 2010 -0700" }, "message": "OMAP4: SPI: Fix Driver Kconfig\n\nChange dependency to ARCH_OMAP2PLUS to allow systems based on\nomap24xx, omap34xx or omap44xx\n\nCc: spi-devel-general@lists.sourceforge.net\nSigned-off-by: Syed Rafiuddin \u003crafiuddin.syed@ti.com\u003e\nSigned-off-by: Abraham Arce \u003cx0066660@ti.com\u003e\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\n" }, { "commit": "d702d12167a2c05a346f49aac7a311d597762495", "tree": "baae42c299cce34d6df24b5d01f8b1d0b481bd9a", "parents": [ "9418c65f9bd861d0f7e39aab9cfb3aa6f2275d11", "ac0f6f927db539e03e1f3f61bcd4ed57d5cde7a9" ], "author": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Mon Mar 01 14:19:05 2010 -0800" }, "committer": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Mon Mar 01 14:19:05 2010 -0800" }, "message": "Merge with mainline to remove plat-omap/Kconfig conflict\n\nConflicts:\n\tarch/arm/plat-omap/Kconfig\n" }, { "commit": "a8eb7ca0cbb41c9cd379b8d2a2a5efb503aa65e9", "tree": "86901095aeb9e59815a6f95547cf68a9ec0b32e0", "parents": [ "088ef950dc0dd58d2f339e1616c9092fea923f06" ], "author": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Fri Feb 12 12:26:48 2010 -0800" }, "committer": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Mon Feb 15 09:27:02 2010 -0800" }, "message": "omap3: Replace ARCH_OMAP34XX with ARCH_OMAP3\n\nReplace ARCH_OMAP34XX with ARCH_OMAP3\n\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\n" }, { "commit": "088ef950dc0dd58d2f339e1616c9092fea923f06", "tree": "4901dd1855d101f2d4c84c1d297edb4e9404ffcd", "parents": [ "d10f2b6e745f1232ff6517b335faf3bfd7005bec" ], "author": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Fri Feb 12 12:26:47 2010 -0800" }, "committer": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Mon Feb 15 09:27:01 2010 -0800" }, "message": "omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2\n\nConvert ARCH_OMAP24XX to ARCH_OMAP2\n\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\n" }, { "commit": "212b3c8b8ab94d983c2e0ee1821f17dd5b4e0859", "tree": "9906d13e928c42be7b01ab144342b2188c3dea62", "parents": [ "8ca8d15ade201b7723fa386eadcce2044463ff56" ], "author": { "name": "Jean-Hugues Deschenes", "email": "jean-hugues.deschenes@octasic.com", "time": "Fri Jan 22 10:08:31 2010 -0700" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Fri Jan 22 10:08:31 2010 -0700" }, "message": "spi/dw_spi: Fix dw_spi_mmio to depend on HAVE_CLK\n\ndw_spi_mmio is dependent on the clock framework. This marks it as such\nin Kconfig.\n\nSigned-off-by: Jean-Hugues Deschenes \u003cjean-hugues.deschenes@octasic.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "8ca8d15ade201b7723fa386eadcce2044463ff56", "tree": "a40c6b6b8aa97eea8538dbfc9e8cbd97ed47315b", "parents": [ "0a4c1d7d446d3ed6179f907541d180e49b56d4f4" ], "author": { "name": "Jean-Hugues Deschenes", "email": "jean-hugues.deschenes@octasic.com", "time": "Thu Jan 21 09:55:54 2010 -0700" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Thu Jan 21 09:55:54 2010 -0700" }, "message": "spi/dw_spi: Allow dw_spi.c to be a module\n\nSigned-off-by: Jean-Hugues Deschenes \u003cjean-hugues.deschenes@octasic.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "f7b6fd6d1d3833529f1626c761ba7e338586d35e", "tree": "de73b5b29616834ca581da4775f6dfc1e1e18d6b", "parents": [ "8bcb4a88c5834c6a0fc7140edea32186664fe360" ], "author": { "name": "Jean-Hugues Deschenes", "email": "jean-hugues.deschenes@octasic.com", "time": "Thu Jan 21 07:46:42 2010 -0700" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Thu Jan 21 07:46:42 2010 -0700" }, "message": "Memory-mapped dw_spi driver\n\nAdds a memory-mapped I/O dw_spi platform device.\n\nSigned-off-by: Jean-Hugues Deschenes \u003cjean-hugues.deschenes@octasic.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "34b8c66173666025020e3a6f8d4a5c238b19cde5", "tree": "00680c39dde5cefa549028532347902d9f714b4c", "parents": [ "631e61b7ca12ef14c834f99f8948e410c539f585" ], "author": { "name": "Steven King", "email": "sfking@fdwdc.com", "time": "Wed Jan 20 13:49:44 2010 -0700" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Wed Jan 20 13:49:44 2010 -0700" }, "message": "spi: Add Freescale/Motorola Coldfire QSPI driver\n\nAdd support for the QSPI controller found some on Freescale/Motorola\nColdfire MCUs.\n\nFull duplex, active high cs, spi modes 0-3 and word sizes 8-16 bits are\nsupported. The hardware drives the MISO, MOSI and SCLK lines, but the chip\nselects are managed via GPIO and must be configured by the board code.\n\nThe QSPI controller has an 80 byte buffer which allows us to transfer up to 16\nwords at a time. For transfers longer than 16 words, we split the buffer in\nhalf so we can update in one half while the controller is operating on the\nother half. Interrupt latencies then ultimately limits our sustained thru-put\nto something less than half the maximum speed supported by the part.\n\nSigned-off-by: Steven King \u003csfking@fdwdc.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "358934a60d2180dcd1ed20691dbb66d4fb977ab2", "tree": "fcebf0327a981f9062d519db40181fb961c3adcf", "parents": [ "7284ce6c9f6153d1777df5f310c959724d1bd446" ], "author": { "name": "Sandeep Paulraj", "email": "s-paulraj@ti.com", "time": "Wed Dec 16 22:02:18 2009 +0000" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Wed Jan 20 13:49:34 2010 -0700" }, "message": "spi: Add SPI master driver for DaVinci/DA8xx\n\nThis patch adds support for a SPI master driver for the\nDaVinci series of SOCs\n\nSigned-off-by: Sandeep Paulraj \u003cs-paulraj@ti.com\u003e\nSigned-off-by: Mark A. Greer \u003cmgreer@mvista.com\u003e\nSigned-off-by: Philby John \u003cpjohn@in.mvista.com\u003e\nSigned-off-by: Sudhakar Rajashekhara \u003csudhakar.raj@ti.com\u003e\nSigned-off-by: Kevin Hilman \u003ckhilman@deeprootsystems.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "bf931a01a2c024a54204b4b02276af6e8d99a2c0", "tree": "bd76e2f25430b1394c4dc54cd674bdc08b1bfaf2", "parents": [ "4e46aa083853a84c770e00b03746bdeaf5c5aeff", "d53342bf9616ecd7e4a03fece167d0f53b195e87" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Dec 17 15:59:05 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Dec 17 15:59:05 2009 -0800" }, "message": "Merge branch \u0027next-spi\u0027 of git://git.secretlab.ca/git/linux-2.6\n\n* \u0027next-spi\u0027 of git://git.secretlab.ca/git/linux-2.6:\n spi: spi_txx9.c: use resource_size()\n spi: spi_sh_sci.c: use resource_size()\n spi: spi_mpc8xxx.c: use resource_size()\n spi: spi_bfin5xx.c: use resource_size()\n spi: atmel_spi.c: use resource_size()\n spi: Add s3c64xx SPI Controller driver\n atmel_spi: fix dma addr calculation for len \u003e BUFFER_SIZE\n spi_s3c24xx: add FIQ pseudo-DMA support\n spi: controller driver for Designware SPI core\n spidev: add proper section markers\n spidev: use DECLARE_BITMAP instead of declaring the array\n" }, { "commit": "230d42d422e7b69fc9b270f41c69e63b54572e26", "tree": "f2cec91b4795c78fa431134a73c5bf0e596a0482", "parents": [ "6aed4ee9b4610cd1e0315c90855b32e59ee81a15" ], "author": { "name": "Jassi Brar", "email": "jassi.brar@samsung.com", "time": "Mon Nov 30 07:39:42 2009 +0000" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Thu Dec 17 08:58:17 2009 -0700" }, "message": "spi: Add s3c64xx SPI Controller driver\n\nEach SPI controller has exactly one CS line and as such doesn\u0027t\nprovide for multi-cs. We implement a workaround to support\nmulti-cs by _not_ configuring the mux\u0027ed CS pin for each SPI\ncontroller. The CS mechanism is assumed to be fully machine\nspecific - the driver doesn\u0027t even assume some GPIO pin is used\nto control the CS.\n\nThe driver selects between DMA and POLLING mode depending upon\nthe xfer size - DMA mode for xfers bigger than FIFO size, POLLING\nmode otherwise.\n\nThe driver has been designed to be capable of running SoCs since\ns3c64xx and till date, for that reason some of the register fields\nhave been passed via, SoC specific, platform data.\n\nSigned-off-by: Jassi Brar \u003cjassi.brar@samsung.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "bec0806cfec6ded1a7e097bb95279e521a796129", "tree": "f4be92d1c09a1785ea693d9f99ad2dbfc26bbbac", "parents": [ "e24c745272072fd2abe55209f1949b7b7ee602a7" ], "author": { "name": "Ben Dooks", "email": "ben@simtec.co.uk", "time": "Mon Dec 14 22:20:24 2009 -0800" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Thu Dec 17 08:57:01 2009 -0700" }, "message": "spi_s3c24xx: add FIQ pseudo-DMA support\n\nAdd pseudo-DMA by FIQ to the S3C24XX SPI driver. This allows the driver\nto get DMA-like performance where there are either no free DMA channels or\nwhen doing transfers that required both TX and RX data paths.\n\nSince this patch requires the addition of an assembly file to hold the FIQ\ncode, we rename the module (instead of adding a rename of the .c file to\nthis patch). We expect most users are loading this via udev and thus\nthere should be no change to the userland configuration.\n\nSigned-off-by: Ben Dooks \u003cben@simtec.co.uk\u003e\nSigned-off-by: Simtec Linux Team \u003clinux@simtec.co.uk\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "e24c745272072fd2abe55209f1949b7b7ee602a7", "tree": "5f9db63ad5aafd57587dd9ebf62afa33eb65a095", "parents": [ "db389b6143c895d23060179b14928f63d44285a2" ], "author": { "name": "Feng Tang", "email": "feng.tang@intel.com", "time": "Mon Dec 14 14:20:22 2009 -0800" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Thu Dec 17 08:39:13 2009 -0700" }, "message": "spi: controller driver for Designware SPI core\n\nDriver for the Designware SPI core, it supports multipul interfaces like\nPCI/APB etc. User can use \"dw_apb_ssi_db.pdf\" from Synopsys as HW\ndatasheet.\n\n[randy.dunlap@oracle.com: fix build]\n[akpm@linux-foundation.org: build fix]\nSigned-off-by: Feng Tang \u003cfeng.tang@intel.com\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "478e4e9d7a618379676b17e64583ff3622f2fec5", "tree": "1f25c96499abbb0d0b47f75aa92134209fcc4ee8", "parents": [ "2205afa7d13ec716935dfd4b8ff71059ee7aeb0c", "965346e3b99e2c5f51bd1325ddd0257227000355" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Dec 14 10:22:11 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Dec 14 10:22:11 2009 -0800" }, "message": "Merge branch \u0027next-spi\u0027 of git://git.secretlab.ca/git/linux-2.6\n\n* \u0027next-spi\u0027 of git://git.secretlab.ca/git/linux-2.6: (23 commits)\n spi: fix probe/remove section markings\n Add OMAP spi100k driver\n spi-imx: don\u0027t access struct device directly but use dev_get_platdata\n spi-imx: Add mx25 support\n spi-imx: use positive logic to distinguish cpu variants\n spi-imx: correct check for platform_get_irq failing\n ARM: NUC900: Add spi driver support for nuc900\n spi: SuperH MSIOF SPI Master driver V2\n spi: fix spidev compilation failure when VERBOSE is defined\n spi/au1550_spi: fix setupxfer not to override cfg with zeros\n spi/mpc8xxx: don\u0027t use __exit_p to wrap plat_mpc8xxx_spi_remove\n spi/i.MX: fix broken error handling for gpio_request\n spi/i.mx: drain MXC SPI transfer buffer when probing device\n MAINTAINERS: add SPI co-maintainer.\n spi/xilinx_spi: fix incorrect casting\n spi/mpc52xx-spi: minor cleanups\n xilinx_spi: add a platform driver using the xilinx_spi common module.\n xilinx_spi: add support for the DS570 IP.\n xilinx_spi: Switch to iomem functions and support little endian.\n xilinx_spi: Split into of driver and generic part.\n ...\n" }, { "commit": "35c9049b27040d09461bc90928ad770be7ddf661", "tree": "5f982bb68be90e834f8213e47a41dd442c6e679d", "parents": [ "980f3beeb68fd3b383908bac8a017b121df8ee29" ], "author": { "name": "Cory Maccarrone", "email": "darkstar6262@gmail.com", "time": "Sun Dec 13 01:02:11 2009 -0700" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Sun Dec 13 01:02:11 2009 -0700" }, "message": "Add OMAP spi100k driver\n\nThis change adds the OMAP SPI 100k driver created by\nFabrice Crohas \u003cfcrohas@gmail.com\u003e. This SPI bus is found on\nOMAP7xx-series smartphones, and for many, the touchscreen is\nattached to this bus.\n\nThe lion\u0027s share of the work was done by Fabrice on this driver --\nI am merely porting it from the Linwizard project on his behalf.\n\nSigned-off-by: Cory Maccarrone \u003cdarkstar6262@gmail.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "30eaed053c9bced7a23624e4bab5602e5b85124f", "tree": "4d3b923a7281b4d12d251399b775eb0584bdafe9", "parents": [ "8051effcbced8478119167b93b0e9554cb82d28e" ], "author": { "name": "Wan ZongShun", "email": "mcuos.com@gmail.com", "time": "Tue Dec 01 14:29:20 2009 +0000" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Sun Dec 13 00:58:00 2009 -0700" }, "message": "ARM: NUC900: Add spi driver support for nuc900\n\nSigned-off-by: Wan ZongShun \u003cmcuos.com@gmail.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "8051effcbced8478119167b93b0e9554cb82d28e", "tree": "03ce88851ca697c8ed5f1d8eadcb32972342dbac", "parents": [ "41df70d9ac2d0d36b23a0ec4866f67e540f366ff" ], "author": { "name": "Magnus Damm", "email": "damm@opensource.se", "time": "Thu Nov 26 11:10:05 2009 +0000" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Sun Dec 13 00:48:27 2009 -0700" }, "message": "spi: SuperH MSIOF SPI Master driver V2\n\nThis patch is V2 of SPI Master support for the SuperH MSIOF.\nFull duplex, spi mode 0-3, active high cs, 3-wire and lsb\nfirst should all be supported, but the driver has so far\nonly been tested with \"mmc_spi\".\n\nThe MSIOF hardware comes with 32-bit FIFOs for receive and\ntransmit, and this driver simply breaks the SPI messages\ninto FIFO-sized chunks. The MSIOF hardware manages the pins\nfor clock, receive and transmit (sck/miso/mosi), but the chip\nselect pin is managed by software and must be configured as\na regular GPIO pin by the board code.\n\nPerformance wise there is still room for improvement, but\non a Ecovec board with the built-in sh7724 MSIOF0 this driver\ngets Mini-sd read speeds of about half a megabyte per second.\n\nFuture work include better clock setup and merging of 8-bit\ntransfers into 32-bit words to reduce interrupt load and\nimprove throughput.\n\nSigned-off-by: Magnus Damm \u003cdamm@opensource.se\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "8c82da5e2495589b7b70a43789e7cbd61a486ed0", "tree": "fdde7380d2584d0297898373831f26cd5208cabd", "parents": [ "51badebdcf394cc5fd574a524b55b3f6085e5e9c", "6d5355998a757a16815d58da4a739b15a6efbfba" ], "author": { "name": "Benjamin Herrenschmidt", "email": "benh@kernel.crashing.org", "time": "Wed Dec 09 17:10:22 2009 +1100" }, "committer": { "name": "Benjamin Herrenschmidt", "email": "benh@kernel.crashing.org", "time": "Wed Dec 09 17:10:22 2009 +1100" }, "message": "Merge commit \u0027gcl/next\u0027 into next\n" }, { "commit": "771669349e6cec0e29a18dc0b5a108e81b85d58c", "tree": "85d37804913db521f8a2476c424cb9c552bec256", "parents": [ "c9da2e125588677d74324df5088149063d578e8f" ], "author": { "name": "Richard Röjfors", "email": "richard.rojfors@mocean-labs.com", "time": "Fri Nov 13 12:29:00 2009 +0100" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Tue Dec 08 18:48:14 2009 -0700" }, "message": "xilinx_spi: add a platform driver using the xilinx_spi common module.\n\nThis patch adds in a platform device driver using the xilinx_spi common module.\n\nTested-by: John Linn \u003cJohn.Linn@xilinx.com\u003e\nSigned-off-by: Richard Röjfors \u003crichard.rojfors@mocean-labs.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "c9da2e125588677d74324df5088149063d578e8f", "tree": "adafee69c0b90867809fd806b4843abbbab6f9b9", "parents": [ "86fc593599c11b62a11c85b4d7b709089df15c29" ], "author": { "name": "Richard Röjfors", "email": "richard.rojfors@mocean-labs.com", "time": "Fri Nov 13 12:28:55 2009 +0100" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Tue Dec 08 18:48:14 2009 -0700" }, "message": "xilinx_spi: add support for the DS570 IP.\n\nThis patch adds in support for the DS570 IP.\n\nIt\u0027s register compatible with the DS464, but adds support for 8/16/32 SPI.\n\nThe 8/16/32 support is added by attaching callbacks reading/writing the\nproper amount of data. To indicate to the driver which amount of bits\nto use a new field is introduced in the platform data struct.\n\nAcked-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nTested-by: John Linn \u003cJohn.Linn@xilinx.com\u003e\nSigned-off-by: Richard Röjfors \u003crichard.rojfors@mocean-labs.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "86fc593599c11b62a11c85b4d7b709089df15c29", "tree": "aea08df21b6c9b7e6fe7b4a93c00ae56d8737140", "parents": [ "d5af91a1faca68e9a8cc493b85aa7b194b6128aa" ], "author": { "name": "Richard Röjfors", "email": "richard.rojfors@mocean-labs.com", "time": "Fri Nov 13 12:28:49 2009 +0100" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Tue Dec 08 18:48:14 2009 -0700" }, "message": "xilinx_spi: Switch to iomem functions and support little endian.\n\nThis patch changes the out_(be)(8|16|32) and in_(be)(8|16|32) calls to 32 bits ioread/iowrite.\n\nThe read and write function are attached to the internal struct as callbacks, callback\nis selected depending on endianess.\n\nThis will also build on platforms not supporting the in/out calls for instance x86.\n\nAcked-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nTested-by: John Linn \u003cJohn.Linn@xilinx.com\u003e\nSigned-off-by: Richard Röjfors \u003crichard.rojfors@mocean-labs.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "d5af91a1faca68e9a8cc493b85aa7b194b6128aa", "tree": "e5948bf1cb4e6e2b9d20392d9542da43559c1810", "parents": [ "b8d4e2ce60b63294e3408d1c5211b8a8dc4af095" ], "author": { "name": "Richard Röjfors", "email": "richard.rojfors@mocean-labs.com", "time": "Fri Nov 13 12:28:39 2009 +0100" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Tue Dec 08 18:48:14 2009 -0700" }, "message": "xilinx_spi: Split into of driver and generic part.\n\nThis patch splits the xilinx_spi driver into a generic part and a\nOF driver part.\n\nThe reason for this is to later add in a platform driver as well.\n\nTested-by: John Linn \u003cJohn.Linn@xilinx.com\u003e\nSigned-off-by: Richard Röjfors \u003crichard.rojfors@mocean-labs.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "4c1fba442960cfa2fd6333b9fec7d5b85c5fa29f", "tree": "bd0e8eacfdfc81032d81080b14c6c5283f2483b9", "parents": [ "87ec0e98cfdd8b68da6a7f9e70142ffc0e404fbb" ], "author": { "name": "Anton Vorontsov", "email": "avorontsov@ru.mvista.com", "time": "Mon Oct 12 20:49:27 2009 +0400" }, "committer": { "name": "Kumar Gala", "email": "galak@kernel.crashing.org", "time": "Wed Nov 11 21:43:26 2009 -0600" }, "message": "spi_mpc8xxx: Add support for QE DMA mode and CPM1/CPM2 chips\n\nThis patch adds QE buffer descriptors mode support for the\nspi_mpc8xxx driver, and as a side effect we now support CPM1\nand CPM2 SPI controllers.\n\nThat means that today we support almost all MPC SPI controllers:\n\n- MPC834x-style controllers (support PIO mode only);\n- CPM1 and CPM2 controllers (support DMA mode only);\n- QE SPI controllers in CPU mode (PIO mode with shift quirks);\n- QE SPI controllers in buffer descriptors (DMA) mode;\n\nThe only controller we don\u0027t currently support is a newer eSPI\n(with a dedicated chip selects and a bit different registers map).\n\nSigned-off-by: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nAcked-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\n" }, { "commit": "42bbb70980f3720b0ae6da6af862af0e95a04351", "tree": "934ef43d2e39c73ee52ba91554dc369abff8324c", "parents": [ "ad6577629acf8a3f47165248ca7ccc0d94673ada" ], "author": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Wed Nov 04 15:34:18 2009 -0700" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Wed Nov 04 15:34:18 2009 -0700" }, "message": "powerpc/5200: Add mpc5200-spi (non-PSC) device driver\n\nAdds support for the dedicated SPI device on the Freescale MPC5200(b)\nSoC.\n\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "0644c48672a3146c01bf7314d440edecf8742d62", "tree": "d30abb3784e670b33aa5dff3b1723201c03bb0a4", "parents": [ "570327d9f48b0be5ca626bcfd80266b7ee2001aa" ], "author": { "name": "dmitry pervushin", "email": "dpervushin@embeddedalley.com", "time": "Tue Sep 22 16:46:15 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Sep 23 07:39:44 2009 -0700" }, "message": "spi: Freescale STMP driver\n\nAdd SPI driver for Freescale STMP 3xxx-based boards\n\n[dbrownell@users.sourceforge.net: cleanup sequence, spi_unregister_master]\nSigned-off-by: dmitry pervushin \u003cdpervushin@embeddedalley.com\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nCc: Kumar Gala \u003cgalak@gate.crashing.org\u003e\nCc: Timur Tabi \u003ctimur@freescale.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "b5f3294f0be5496aec01e5aa709a5fab8bb2f225", "tree": "25818bd8101567f8b7c1e468fb8eb02f23f4a56e", "parents": [ "f33b29ee3309ba2cd56ade8e905b3640a7dea909" ], "author": { "name": "Sascha Hauer", "email": "s.hauer@pengutronix.de", "time": "Tue Sep 22 16:46:02 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Sep 23 07:39:43 2009 -0700" }, "message": "spi: add SPI driver for most known i.MX SoCs\n\nThis driver has been tested on i.MX1/i.MX27/i.MX35 with an AT25 type\nEEPROM and on i.MX27/i.MX31 with a Freescale MC13783 PMIC.\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nTested-by: Guennadi Liakhovetski \u003cg.liakhovetski@gmx.de\u003e\nAcked-by: David Brownell \u003cdavid-b@pacbell.net\u003e\nCc: Andrea Paterniani \u003ca.paterniani@swapp-eng.it\u003e\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "f33b29ee3309ba2cd56ade8e905b3640a7dea909", "tree": "4a4d968521c355a59a1e33444baa6475e253e9d3", "parents": [ "b73b255956119111dc18fa063d1e3a0bb3f06328" ], "author": { "name": "linus.walleij@stericsson.com", "email": "linus.walleij@stericsson.com", "time": "Tue Sep 22 16:46:01 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Sep 23 07:39:43 2009 -0700" }, "message": "spi: add default selection of PL022 for ARM reference platforms\n\nThis makes the PL022 driver a default choice for any RealView and\nVersatile boards plus the integrator IMPD1 which all contain the PL022\nPrimeCell. This will make it a default choice if and only if a user\nselects SPI support for their board.\n\nSigned-off-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "44dab88e7cc99d1d2caa9a8936e09d9a98a6761a", "tree": "412611ccdccc4e9dd348f1568bc3ed8055720fff", "parents": [ "7a8fa725b21ae19a3d9a2de196a440da8c9085a6" ], "author": { "name": "Steven A. Falco", "email": "sfalco@harris.com", "time": "Tue Sep 22 16:45:58 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Sep 23 07:39:43 2009 -0700" }, "message": "spi: add spi_ppc4xx driver\n\nThis adds a SPI driver for the SPI controller found in the IBM/AMCC\n4xx PowerPC\u0027s.\n\nSigned-off-by: Stefan Roese \u003csr@denx.de\u003e\nSigned-off-by: Wolfgang Ocker \u003cweo@reccoware.de\u003e\nAcked-by: Josh Boyer \u003cjwboyer@linux.vnet.ibm.com\u003e\nSigned-off-by: Steven A. Falco \u003csfalco@harris.com\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "07fcaa2486ca4f5c67bebedfa56e705c4dd23fc2", "tree": "5f51845973a59dafc130beea744f384988a1b980", "parents": [ "8b2feb10c907b610bf8a739792c6b967c65445b0" ], "author": { "name": "Sascha Hauer", "email": "s.hauer@pengutronix.de", "time": "Tue Sep 22 16:45:56 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Sep 23 07:39:42 2009 -0700" }, "message": "spi: remove i.MX SPI driver\n\nThis driver is in a non working state at the moment and will be replaced\nby a bitbang driver which can also handle the newer i.MX variants\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nCc: Guennadi Liakhovetski \u003cg.liakhovetski@gmx.de\u003e\nAcked-by: David Brownell \u003cdavid-b@pacbell.net\u003e\nAcked-by: Andrea Paterniani \u003ca.paterniani@swapp-eng.it\u003e\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "575c5807f6842422e9fe2432fd48dfcc1d7aef41", "tree": "5b0f44de7188c7a82a6df635a919dc00b694baac", "parents": [ "34a661a1fe02840b6fc8de0a616464dd4899782f" ], "author": { "name": "Anton Vorontsov", "email": "avorontsov@ru.mvista.com", "time": "Thu Jun 18 16:49:08 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jun 19 16:46:05 2009 -0700" }, "message": "spi_mpc8xxx: s/83xx/8xxx/g\n\nSince we renamed the file, we might want to rename the file internals too.\n\nThough we don\u0027t bother with changing platform driver name and platform\nmodule alias. The stuff is legacy and hopefully we\u0027ll remove it soon.\n\nSuggested-by: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\nSigned-off-by: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "9e04b3336a90efef6a912501155f9880abf7b3c2", "tree": "a30ac517b376e9afd024436bfaf1e939c8b9c738", "parents": [ "433f13a7274ccc3541d2832ffe5ef4472036cc72" ], "author": { "name": "Anton Vorontsov", "email": "avorontsov@ru.mvista.com", "time": "Thu Jun 18 16:48:59 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Jun 19 16:46:04 2009 -0700" }, "message": "spi_mpc83xx: handle other Freescale processors\n\nWith this patch we\u0027ll able to select spi_mpc83xx driver on the MPC86xx\nplatforms. Let the driver depend on FSL_SOC, so we don\u0027t have to worry\nabout Kconfig anymore.\n\nAlso remove the \"experimental\" dependency, the driver has been tested to\nwork on a various hardware, and surely not experimental anymore.\n\nSigned-off-by: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nCc: Kumar Gala \u003cgalak@gate.crashing.org\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "2cf4d4514d5b43c1f3b64bd0ec8b9853bde8f1dc", "tree": "e35a625496acc6ac852846d40b8851186b9d1ac4", "parents": [ "44b7532b8b464f606053562400719c9c21276037", "ce53895a5d24e0ee19fb92f56c17323fb4c9ab27" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Jun 14 13:42:43 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Jun 14 13:42:43 2009 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm\n\n* \u0027for-linus\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)\n MAINTAINERS: EB110ATX is not ebsa110\n MAINTAINERS: update Eric Miao\u0027s email address and status\n fb: add support of LCD display controller on pxa168/910 (base layer)\n [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN\n [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines\n [ARM] 5544/1: Trust PrimeCell resource sizes\n [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.\n [ARM] pxa/sharpsl_pm: drop set_irq_type calls\n [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one\n [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it\u0027s now pxa specific\n [ARM] sa1100: remove unused collie_pm.c\n [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]\n [ARM] 5550/1: Add default configure file for w90p910 platform\n [ARM] 5549/1: Add clock api for w90p910 platform.\n [ARM] 5548/1: Add gpio api for w90p910 platform\n [ARM] 5551/1: Add multi-function pin api for w90p910 platform.\n [ARM] Make ARM_VIC_NR depend on ARM_VIC\n [ARM] 5546/1: ARM PL022 SSP/SPI driver v3\n ARM: OMAP4: SMP: Update defconfig for OMAP4430\n ARM: OMAP4: SMP: Enable SMP support for OMAP4430\n ...\n" }, { "commit": "b43d65f7e818485664037a46367cfb15af05bd8c", "tree": "f532b4c0ff4d931819d74d46eadf252426600b4e", "parents": [ "1ee73784b656386a8c4c261282716c3b9019aea0" ], "author": { "name": "Linus Walleij", "email": "linus.walleij@stericsson.com", "time": "Tue Jun 09 08:11:42 2009 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Wed Jun 10 22:39:52 2009 +0100" }, "message": "[ARM] 5546/1: ARM PL022 SSP/SPI driver v3\n\nThis adds a driver for the ARM PL022 PrimeCell SSP/SPI\ndriver found in the U300 platforms as well as in some\nARM reference hardware, and in a modified version on the\nNomadik board.\n\nReviewed-by: Alessandro Rubini \u003crubini-list@gnudd.com\u003e\nReviewed-by: Russell King \u003clinux@arm.linux.org.uk\u003e\nReviewed-by: Baruch Siach \u003cbaruch@tkos.co.il\u003e\n\nSigned-off-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "6fa612b56c575a5235568593eab4240c90608630", "tree": "288ff82b2dd6a6c278785ff34e52bc7bf348d284", "parents": [ "873a2e89c5e32a5c72a9ece76fcb871358ae22d2" ], "author": { "name": "Michal Simek", "email": "monstr@monstr.eu", "time": "Mon May 11 15:49:12 2009 +0200" }, "committer": { "name": "Michal Simek", "email": "monstr@monstr.eu", "time": "Thu May 21 15:56:04 2009 +0200" }, "message": "microblaze: Kconfig: Enable drivers for Microblaze\n\nSigned-off-by: Michal Simek \u003cmonstr@monstr.eu\u003e\n" }, { "commit": "8c8fdbc9bd9718b21146065de61c0cafdff11ecb", "tree": "5888e8ed21a19bc629a84217f1fbf2e3651b348f", "parents": [ "84c9fa43040af08126326ac8b2a2b18f804eb1e8" ], "author": { "name": "Sascha Hauer", "email": "s.hauer@pengutronix.de", "time": "Wed Apr 01 12:40:15 2009 +0200" }, "committer": { "name": "Sascha Hauer", "email": "s.hauer@pengutronix.de", "time": "Thu May 07 16:15:48 2009 +0200" }, "message": "[ARM] Remove arch-imx from build system\n\narch-imx is superseeded by the MXC architecture support.\nThis patch removes arch-imx from the build system.\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\n" }, { "commit": "e51d565ff6bb1cedc10568425511badf0633a212", "tree": "c8bd2623f2b925e1c8fb451d022529410f9c3406", "parents": [ "2e157888f132131f8877affd2785dcee4c227c1d" ], "author": { "name": "Wolfram Sang", "email": "w.sang@pengutronix.de", "time": "Mon Jan 26 21:19:54 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jan 26 21:19:54 2009 +0100" }, "message": "spi: Move at25 (for SPI eeproms) to /drivers/misc/eeprom\n\nSigned-off-by: Wolfram Sang \u003cw.sang@pengutronix.de\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "d29389de0b0ee1715333bafc6ac3f22a75aa4313", "tree": "6c4321359bd10231532d6cb2141f06070d8ddfd6", "parents": [ "c2bacfc44f4b8d03dbaad5d2dca2fb4161e81975" ], "author": { "name": "David Brownell", "email": "dbrownell@users.sourceforge.net", "time": "Tue Jan 06 14:41:41 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Jan 06 15:59:19 2009 -0800" }, "message": "spi_gpio driver\n\nGeneralize the old at91rm9200 \"bootstrap\" bitbanging SPI master driver as\n\"spi_gpio\", so it works with arbitrary GPIOs and can be configured through\nplatform_data. Such SPI masters support:\n\n - any number of bus instances (bus_num is the platform_device.id)\n - any number of chipselects (one GPIO per spi_device)\n - all four SPI_MODE values, and SPI_CS_HIGH\n - i/o word sizes from 1 to 32 bits;\n - devices configured as with any other spi_master controller\n\nWhen configured using platform_data, this provides relatively low clock\nrates. On platforms that support inlined GPIO calls, significantly\nimproved transfer speeds are also possible with a semi-custom driver.\n(It\u0027s still painful when accessing flash memory, but less so.)\n\nSanity checked by using this version to replace both native controllers on\na board with six different SPI slaves, relying on three different\nSPI_MODE_* values and both SPI_CS_HIGH settings for correct operation.\n\n[akpm@linux-foundation.org: cleanups]\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nAcked-by: Magnus Damm \u003cdamm@igel.co.jp\u003e\nTested-by: Magnus Damm \u003cdamm@igel.co.jp\u003e\nCc: Torgil Svensson \u003ctorgil.svensson@gmail.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "60cadec9da7b6c91aca51f408c828f7e74a68379", "tree": "006fa6831612ad3a70312f6b513c1dfc73cd5816", "parents": [ "756fcab27756f32722b748e2aff3393eef9a589d" ], "author": { "name": "Shadi Ammouri", "email": "shadi@marvell.com", "time": "Tue Aug 05 13:01:09 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Aug 05 14:33:46 2008 -0700" }, "message": "spi: new orion_spi driver\n\nThis adds an SPI driver for the SPI controller found in various Marvell\nOrion ARM SoCs. It currently supports only one slave, which must use SPI\nmode 0.\n\n[dbrownell@users.sourceforge.net: cleanups, meet specs, pass \"sparse\"]\nSigned-off-by: Shadi Ammouri \u003cshadi@marvell.com\u003e\nSigned-off-by: Saeed Bishara \u003csaeed@marvell.com\u003e\nSigned-off-by: Lennert Buytenhek \u003cbuytenh@marvell.com\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "6291fe2abce4689d6ee7cbaea16692c79bf0d01b", "tree": "088f71d0f8c730ba8667484940027aaf76c0c95e", "parents": [ "166a375b657b7af494f4ce3f72c4d2002180da44" ], "author": { "name": "Robert P. J. Day", "email": "rpjday@crashcourse.ca", "time": "Wed Jul 23 21:29:53 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Jul 24 10:47:30 2008 -0700" }, "message": "SPI Kconfig simplifications\n\nUse \"if SPI_MASTER\" to remove numerous dependencies.\n\n[dbrownell@users.sourceforge.net: remove a couple now-needless EXPERIMENTAL dependencies too]\nSigned-off-by: Robert P. J. Day \u003crpjday@crashcourse.ca\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "c9bfcb3151040cff6714542d1da04ccd7e2d3efc", "tree": "e3df8626f2b60d9373f8dfe125927f31d8381e1b", "parents": [ "f4ed0deae8983591264d0e194e168ef65f4775f5" ], "author": { "name": "Joakim Tjernlund", "email": "Joakim.Tjernlund@transmode.se", "time": "Mon May 12 14:02:30 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue May 13 08:02:25 2008 -0700" }, "message": "spi_mpc83xx: much improved driver\n\nThe current driver may cause glitches on SPI CLK line since one must disable\nthe SPI controller before changing any HW settings. Fix this by implementing\na local spi_transfer function that won\u0027t change speed and/or word size while\nCS is active.\n\nWhile doing that heavy lifting a few other issues were addressed too:\n - Make word size 16 and 32 work too.\n - Honor bits_per_word and speed_hz in spi transaction.\n - Optimize the common path.\n\nThis also stops using the \"bitbang\" framework (except for a few constants).\n\n[Roel Kluin \u003c12o3l@tiscali.nl\u003e: \"irq\" needs to be signed]\nSigned-off-by: Joakim Tjernlund \u003cJoakim.Tjernlund@transmode.se\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "79d8c7a8c888a7c2ab9dd4249495b24575b3f9a6", "tree": "ef553a449ca150af5ccdbd0693d56305f7dbf938", "parents": [ "608dfddd845da5ab6accef70154c8910529699f7" ], "author": { "name": "Alessandro Guido", "email": "alessandro.guido@gmail.com", "time": "Mon Apr 28 02:14:16 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Apr 28 08:58:31 2008 -0700" }, "message": "spi: use menuconfig for CONFIG_SPI\n\nSigned-off-by: Alessandro Guido \u003calessandro.guido@gmail.com\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "ccc7baed1868efd02dac88b32cba4a837a558536", "tree": "e38690934ade336259044389b9d8ea6bbe3d3c31", "parents": [ "37e466408796300ec935e15f01b4ca88678b96ef" ], "author": { "name": "Girish", "email": "girishsg@ti.com", "time": "Wed Feb 06 01:38:16 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Wed Feb 06 10:41:11 2008 -0800" }, "message": "spi: omap2_mcspi handles omap3 too\n\nThis adds driver OMAP SPI specific changes to support OMAP 3430\n\nSigned-off-by: Girish S G \u003cgirishsg@ti.com\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "37e466408796300ec935e15f01b4ca88678b96ef", "tree": "946465d14460a9dec3552c746850d4706c5981f1", "parents": [ "b359fbc4582abf346fa6773b2bc1d63581fda582" ], "author": { "name": "Magnus Damm", "email": "magnus.damm@gmail.com", "time": "Wed Feb 06 01:38:15 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Wed Feb 06 10:41:11 2008 -0800" }, "message": "spi: SuperH SPI using SCI\n\nAdd support for SPI over SCI pins. SCI is a very simple serial controller\nblock that can be found on older SuperH processors. In theory it is\npossible to use the SCI hardware block in syncronous mode, but this version\nof the driver simply hooks up the bit banging code on the SCI pins.\n\nSigned-off-by: Magnus Damm \u003cdamm@igel.co.jp\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nCc: Paul Mundt \u003clethal@linux-sh.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "2f1a74e5a2de0459139b85af95e901448726c375", "tree": "87b7bccdcff291b4956632f44c0233d228536299", "parents": [ "3dcb00ea58f6b5dc62b89bbfd54353a06e6af921" ], "author": { "name": "eric miao", "email": "eric.miao@marvell.com", "time": "Wed Nov 21 18:50:53 2007 +0800" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Sat Jan 26 15:07:52 2008 +0000" }, "message": "[ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free()\n\n1. make pxa2xx_spi.c use ssp_request() and ssp_free() to get the common\n information of the designated SSP port.\n\n2. remove those IRQ/memory request code, ssp_request() has done that for\n the driver\n\n3. the SPI platform device is thus made psuedo, no resource (memory/IRQ)\n has to be defined, all will be retreived by ssp_request()\n\n4. introduce ssp_get_clk_div() to handle controller difference in clock\n divisor setting\n\n5. use clk_xxx() API for clock enable/disable, and clk_get_rate() to\n handle the different SSP clock frequency between different processors\n\nSigned-off-by: eric miao \u003ceric.miao@marvell.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "529a73fbaeee2f3bd932be8b54665994133be6ae", "tree": "89376052e434af5a68a4c8adfbeaf75b2e0f93c6", "parents": [ "e4e9a7adebfc01bfa2a46c76615c249a4082dfec" ], "author": { "name": "Mike Frysinger", "email": "michael.frysinger@analog.com", "time": "Fri Nov 23 14:28:44 2007 +0800" }, "committer": { "name": "Bryan Wu", "email": "bryan.wu@analog.com", "time": "Fri Nov 23 14:28:44 2007 +0800" }, "message": "Blackfin arch: punt CONFIG_BFIN -- we already have CONFIG_BLACKFIN\n\nSigned-off-by: Mike Frysinger \u003cmichael.frysinger@analog.com\u003e\nSigned-off-by: Bryan Wu \u003cbryan.wu@analog.com\u003e\n\n" }, { "commit": "328329a7bda52a8ed413cd485211463581f7abab", "tree": "5fc606de1e93ef8ada6a5667e4d99f73db29126b", "parents": [ "d1e44d9ce8589cc4ca0596989fe17130817ebec5" ], "author": { "name": "Anton Vorontsov", "email": "avorontsov@ru.mvista.com", "time": "Tue Oct 16 01:27:47 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue Oct 16 09:43:10 2007 -0700" }, "message": "spi_mpc83xx handles other processors with QUICC engine\n\nCurrently, all QE SPI controllers are almost the same comparing to\nMPC83xx\u0027s, thus let\u0027s use that driver for them.\n\nTested to work on MPC85xx in loopback mode.\n\nSigned-off-by: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nAcked-by: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "f2cac67dd36626128e06e79fc7ca95d544dcdc67", "tree": "689ff4133fa87e2bcbe532158b2fea7684e73a8d", "parents": [ "ccdc7bf925731ef37f0af95262d675b74544932f" ], "author": { "name": "Atsushi Nemoto", "email": "anemo@mba.ocn.ne.jp", "time": "Tue Jul 17 04:04:15 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue Jul 17 10:23:05 2007 -0700" }, "message": "spi_txx9 controller driver\n\nThis is a driver for SPI controller built into TXx9 MIPS SoCs.\nThis driver is derived from arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c.\n\nSigned-off-by: Atsushi Nemoto \u003canemo@mba.ocn.ne.jp\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "ccdc7bf925731ef37f0af95262d675b74544932f", "tree": "7266a525b65f9f25a32c06683f2aec4053322e53", "parents": [ "f29ba280ecb46331c1f6842b094808af01131422" ], "author": { "name": "Samuel Ortiz", "email": "samuel.ortiz@solidboot.com", "time": "Tue Jul 17 04:04:13 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue Jul 17 10:23:05 2007 -0700" }, "message": "SPI: omap2_mcspi driver\n\nAdd OMAP24XX McSPI (Multichannel SPI) controller driver. This driver is\ntested very well under OMAP GIT tree with N800 - Nokia Internet Tablet, and\nsome other OMAP2 boards.\n\nRecent updates included bugfixes, cleanups, speedups, and better\nconformance to the current SPI programming interface. This doesn\u0027t yet\nunderstand the third controller instance on the OMAP 2430.\n\n[david-b@pacbell.net: more minor cleanups to the omap2_mcspi driver]\nSigned-off-by: Juha Yrjölä \u003cjuha.yrjola@solidboot.com\u003e\nSigned-off-by: Trilok Soni \u003csoni.trilok@gmail.com\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nCc: Tony Lindgren \u003ctony@atomide.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "ae918c02d365c884bccb193960db41364868bb7b", "tree": "5de1aea4e976c01e50e8bd0640835f719297c464", "parents": [ "447aef1a19135a69bfd725c33f7e753740cb8447" ], "author": { "name": "Andrei Konovalov", "email": "akonovalov@ru.mvista.com", "time": "Tue Jul 17 04:04:11 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue Jul 17 10:23:05 2007 -0700" }, "message": "SPI master driver for Xilinx virtex\n\nSimple SPI master driver for Xilinx SPI controller.\nNo support for multiple masters.\nNot using level 1 drivers from EDK.\n\n[akpm@linux-foundation.org: uninlining]\nSigned-off-by: Yuri Frolov \u003cyfrolov@ru.mvista.com\u003e\nSigned-off-by: Andrei Konovalov \u003cakonovalov@ru.mvista.com\u003e\nCc: Kumar Gala \u003cgalak@gate.crashing.org\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "447aef1a19135a69bfd725c33f7e753740cb8447", "tree": "bef8836aaf1acef2a86e71ff8898b9675fae6416", "parents": [ "da0abc275f029e0f52c5165de524bcf64e717703" ], "author": { "name": "Ben Dooks", "email": "ben@trinity.fluff.org", "time": "Tue Jul 17 04:04:10 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue Jul 17 10:23:05 2007 -0700" }, "message": "SPI: tle620x power switch driver\n\nAdd support for the Infineon TLE62x0 series of low-side driver chips, such\nas the TLE6220 or TLE6230. These can be viewed as output GPIOs specialized\nfor power switching applications. The driver provides a userspace\ninterface to those GPIOs, and to the switch status they provide.\n\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "da0abc275f029e0f52c5165de524bcf64e717703", "tree": "e5fc22dfdb42297e37f06bd9f4ee50a36c1a5f62", "parents": [ "defbd3b4bbd9d85a68529f829f4ee39899c318dc" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Tue Jul 17 04:04:09 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue Jul 17 10:23:05 2007 -0700" }, "message": "S3c24xx SPI controllers both select \u0027bitbang\u0027\n\nTweak Kconfig for the S3C24XX SPI controller drivers. Both use the bitbang\nframework; only one previously said that. Plus in this case \"select\" is\nthe right way to manage that dependency, since folk will not know up front\nto enable bitbang in order to even see those S3C drivers in order to enable\nthem.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "78961a5740374a8143f8fe120300f2ed160dd276", "tree": "fccfe279a3c01f139bc845f6c1e9575e8e0efd94", "parents": [ "4917d927809918f0070bd1077b41e3daf78643b2" ], "author": { "name": "Kaiwan N Billimoria", "email": "kaiwan@designergraphix.com", "time": "Tue Jul 17 04:04:05 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue Jul 17 10:23:04 2007 -0700" }, "message": "spi_lm70llp parport adapter driver\n\nThis adds a driver for the LM70-LLP parport adapter, which is an eval board\nfor the LM70 temperature sensor. For those without that board, it may be a\nsimpler example of a parport-to-SPI adapter then spi_butterfly.\n\nSigned-off-by: Kaiwan N Billimoria \u003ckaiwan@designergraphix.com\u003e\n\nDoc, coding style, and interface updates; build fixes. Minor rename.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "00b8fd236764e3d5bc1d30dc65e256e283de4c3d", "tree": "014b5a7a6f194915646713d1324cc02459a01f40", "parents": [ "0ea971801625184a91a6d80ea85e53875caa0bf5" ], "author": { "name": "Dragos Carp", "email": "dragos.carp@toptica.com", "time": "Thu May 10 22:22:52 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:35 2007 -0700" }, "message": "MPC52xx PSC SPI master driver\n\nSPI master driver for MPC52xx using its Programmable Serial Controller.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Dragos Carp \u003cdragos.carp@toptica.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "e25df1205f37c7bff3ab14fdfc8a5249f3c69c82", "tree": "e53c1f17d79a62bb845438d6af6a7693ef5440f3", "parents": [ "eeca7a36a86db8bfc1945dd7f6f0c22a6b66b31d" ], "author": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Thu May 10 15:45:57 2007 +0200" }, "committer": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Thu May 10 15:46:07 2007 +0200" }, "message": "[S390] Kconfig: menus with depends on HAS_IOMEM.\n\nAdd \"depends on HAS_IOMEM\" to a number of menus to make them\ndisappear for s390 which does not have I/O memory.\n\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\n" }, { "commit": "63bd23591e6c3891d34e4c6dba7c6aa41b05caad", "tree": "7251bee620c2ad802148502305496d5b63090c19", "parents": [ "33e34dc6ee2cb2cf2d50e65c5b825d9ebb8b9e66" ], "author": { "name": "Jan Nikitenko", "email": "jan.nikitenko@gmail.com", "time": "Tue May 08 00:32:25 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue May 08 11:15:16 2007 -0700" }, "message": "au1550 SPI controller driver\n\nHere is a driver for the Alchemy au1550 PSC (Programmable Serial\nController) in SPI master mode.\n\nIt supports dma transfers using the Alchemy descriptor based dma controller\nfor 4-8 bits per word SPI transfers. For 9-24 bits per word transfers, pio\nirq based mode is used to avoid setup of dma channels from scratch on each\nnumber of bits per word change.\n\nTested with au1550; this may also work on other MIPS Alchemy cpus, like\nau1200/au1210/au1250. Used extensively with SD card connected via SPI;\nthis handles 8.1MHz SPI clock transfers using dma without any problem (the\nhighest SPI clock freq possible with au1550 running on 324MHz).\n\nThe driver supports sharing of SPI bus by multiple devices. All features\nof Alchemy SPI mode are supported (all SPI modes, msb/lsb first, bits per\nword in 4-24 range).\n\nAs the SPI clock of the controller depends on main input clock that shall\nbe configured externally, platform data structure for au1550 SPI controller\ndriver contains mainclk_hz attribute to define the input clock rate. From\nthis value, dividers of the controller for SPI clock are set up for\nrequired frequency.\n\nSigned-off-by: Jan Nikitenko \u003cjan.nikitenko@gmail.com\u003e\n\nWhitespace and section fixups. Remove partial workaround for platform\nsetup bug in dma_mask setup; it couldn\u0027t work with multiple controllers.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "814a8d50eb1d88cedcef97567be53ee0d4512631", "tree": "edf10598ae95e5729edca3095b60641606b62939", "parents": [ "735ce95e6b9a262d1fbc0ddb5620deb3a29d1067" ], "author": { "name": "Andrea Paterniani", "email": "a.paterniani@swapp-eng.it", "time": "Tue May 08 00:32:15 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue May 08 11:15:15 2007 -0700" }, "message": "/dev/spidevB.C interface\n\nAdd a filesystem API for \u003clinux/spi/spi.h\u003e stack. The initial version of\nthis interface is purely synchronous.\n\ndbrownell@users.sourceforge.net:\n\n Cleaned up, bugfixed; much simplified; added preliminary documentation.\n\n Works with mdev given CONFIG_SYSFS_DEPRECATED; and presumably udev.\n\n Updated SPI_IOC_MESSAGE ioctl to full spi_message semantics, supporting\n groups of one or more transfers (each of which may be full duplex if\n desired).\n\n This is marked as EXPERIMENTAL with an explicit disclaimer that the API\n (notably the ioctls) is subject to change.\n\nSigned-off-by: Andrea Paterniani \u003ca.paterniani@swapp-eng.it\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nCc: Arnd Bergmann \u003carnd@arndb.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "a5f6abd4f7558fea97bc4021fd0eb7dcc5d16a77", "tree": "d4e8734dd087711e46074846e481457953685586", "parents": [ "8cc75c9a1498913d668b6d3559940c6837cee8bf" ], "author": { "name": "Wu, Bryan", "email": "bryan.wu@analog.com", "time": "Sun May 06 14:50:34 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon May 07 12:12:58 2007 -0700" }, "message": "Blackfin: blackfin on-chip SPI controller driver\n\nThis patch implements the driver necessary use the Analog Devices Blackfin\nprocessor\u0027s SPI Port.\n\nSigned-off-by: Bryan Wu \u003cbryan.wu@analog.com\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "754ce4f29937ba11f16afa41a648a30b0fc1f075", "tree": "65586a969cb51be1069406fd12bb441a10999b60", "parents": [ "de8211b96b8491911bcb222d153c0986cb522bd6" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Wed Feb 14 00:33:09 2007 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Wed Feb 14 08:09:53 2007 -0800" }, "message": "[PATCH] SPI: atmel_spi driver\n\nDriver for the Atmel on-chip SPI master controller.\n\nTested primarily on AVR32/AT32AP7000/ATSTK1000 using mtd_dataflash and the\njffs2 filesystem. Should also work fine on various AT91 ARM-based chips\nlike AT91SAM926x and AT91RM9200.\n\nHardware documentation can be found in the AT32AP7000 data sheet, or its\nAT91 siblings, which can be downloaded from\n\nhttp://www.atmel.com/dyn/products/datasheets.asp?family_id\u003d682\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "b587b13a4f670ebae79ae6259cf44328455e4e69", "tree": "36e614fae95d8a2c888190d162e67ec95d144304", "parents": [ "3925a5ce44330767f7f0de5c58c6a797009f0f75" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Mon Feb 12 00:52:48 2007 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Feb 12 09:48:31 2007 -0800" }, "message": "[PATCH] SPI eeprom driver\n\nThis is adds a simple SPI EEPROM driver, providing access to the EEPROM\nthrough sysfs much like the I2C \"eeprom\" driver ... except this driver\nsupports write access, and multiple EEPROM sizes.\n\nFrom: \"Tuppa, Walter\" \u003cwalter.tuppa@siemens.com\u003e\n\nSince I have EEPROMs on SPI with different address sizing, I made some\nchanges to your at25.c to support them. Works perfectly. (Also includes a\nsmall bugfix for the \"what size address\" test.)\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Walter Tuppa \u003cwalter.tuppa@siemens.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "69c202afa8ad6d6c1c673d8f9d47b43a0a3604e5", "tree": "a8f79c7911042c3cbc1b71e49e51f0c7ebf8055e", "parents": [ "fdb3c18d639311287dc4675abe743847a1aa62a8" ], "author": { "name": "Andrea Paterniani", "email": "a.paterniani@swapp-eng.it", "time": "Mon Feb 12 00:52:39 2007 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Feb 12 09:48:30 2007 -0800" }, "message": "[PATCH] SPI: Freescale iMX SPI controller driver (BIS+)\n\nAdd the SPI controller driver for Freescale i.MX(S/L/1).\nMain features summary:\n\n \u003e Per chip setup via board specific code and/or protocol driver.\n \u003e Per transfer setup.\n \u003e PIO transfers.\n \u003e DMA transfers.\n \u003e Managing of NULL tx / rx buffer for rd only / wr only transfers.\n\nThis patch replace patch-2.6.20-rc4-spi_imx with the following changes:\n \u003e Few cosmetic changes.\n \u003e Function map_dma_buffers now return 0 for success and -1 for failure.\n \u003e Solved a bug inside spi_imx_probe function (wrong error path).\n \u003e Solved a bug inside setup function (bad undo setup for max_speed_hz).\n \u003e For read-only transfers, always write zero bytes.\n\nThis is almost the same as the \u0027BIS\u0027 version sent by Andrea, except for\nupdating the \u0027DUMMY\u0027 byte so that read-only transfers shift out zeroes.\nThat part of the API changed recently, since some half duplex peripheral\nchips require that semantic.\n\nSigned-off-by: Andrea Paterniani \u003ca.paterniani@swapp-eng.it\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "fdb3c18d639311287dc4675abe743847a1aa62a8", "tree": "d5d05f7eab547d515a4fb89d74e556fc462c85b0", "parents": [ "85abfaa78239e63f553cc446f8ae5b955282aa29" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Mon Feb 12 00:52:37 2007 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Feb 12 09:48:30 2007 -0800" }, "message": "[PATCH] SPI controller driver for OMAP Microwire\n\nThis adds a SPI driver for the Microwire controller on OMAP1 chips. This\ndriver has been used in the Linux-OMAP tree for some time now, including\nwith some of those displays using standardized 9-bit commands followed by\ndata with 8-bit words.\n\nMicrowire only supports half duplex transfers, but that\u0027s all that most SPI\nprotocols need. When full duplex, or higher speeds, are needed there are\nseveral other controllers that can be used on OMAP.\n\n[akpm@osdl.org: cleanups]\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Imre Deak \u003cimre.deak@solidboot.com\u003e\nSigned-off-by: Juha Yrjola \u003cjuha.yrjola@solidboot.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "85abfaa78239e63f553cc446f8ae5b955282aa29", "tree": "ba0c5ce223ac5fd8c7388e04f1ccd46249786131", "parents": [ "efc47135e4b6f7e7d81332f50ef68e4a42819d20" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Mon Feb 12 00:52:36 2007 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Feb 12 09:48:30 2007 -0800" }, "message": "[PATCH] SPI Kconfig fix\n\nMinor Kconfig cleanup ... put the SPI_S3C24XX entry in the\ncorrect location (alphabetical order).\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "3cb2fccc5f48a4d6269dfd00b4db570fca2a04d5", "tree": "d11c4db3e38705f7d2c51531e744dd9d27834883", "parents": [ "5d3f083d8f897ce2560bbd4dace483d5aa60d623" ], "author": { "name": "Matt LaPlante", "email": "kernel1@cyberdogtech.com", "time": "Thu Nov 30 05:22:59 2006 +0100" }, "committer": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Thu Nov 30 05:22:59 2006 +0100" }, "message": "Fix misc Kconfig typos\n\nFix various Kconfig typos.\n\nSigned-off-by: Matt LaPlante \u003ckernel1@cyberdogtech.com\u003e\nAcked-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\n" }, { "commit": "7fba53402eb0fb4209c74469814c583b6455e096", "tree": "3f59b82b3bde5ffcf275e8f09e9c5785c21ee43c", "parents": [ "1fc7547d4bfe5c8c8c79e196b955b6fbaa21bfd2" ], "author": { "name": "Ben Dooks", "email": "ben@trinity.fluff.org", "time": "Sat May 20 15:00:18 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Sun May 21 12:59:19 2006 -0700" }, "message": "[PATCH] S3C24XX: hardware SPI driver\n\nHardware based SPI driver for Samsung S3C24XX SoC systems\n\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nCc: Greg KH \u003cgreg@kroah.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "1fc7547d4bfe5c8c8c79e196b955b6fbaa21bfd2", "tree": "1a08d571dbbd64a4585f2e486aa87ad1005a37f7", "parents": [ "1b81d6637d27a0e6a0506ecef65493b50d859cfc" ], "author": { "name": "Ben Dooks", "email": "ben@trinity.fluff.org", "time": "Sat May 20 15:00:17 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Sun May 21 12:59:19 2006 -0700" }, "message": "[PATCH] S3C24XX: GPIO based SPI driver\n\nSPI driver for SPI by GPIO on the Samsung S3C24XX series of SoC processors.\n\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\nCc: Greg KH \u003cgreg@kroah.com\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "ccf06998fe179ae2cc9517ed1d75433dc0b5032d", "tree": "88696d35b5bb168c3f7f2a3b56a683c919e33bed", "parents": [ "ba1a051319dc2bec9f43b7cef11c6e5270107fd6" ], "author": { "name": "Kumar Gala", "email": "galak@kernel.crashing.org", "time": "Sat May 20 15:00:15 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Sun May 21 12:59:19 2006 -0700" }, "message": "[PATCH] spi: add spi master driver for Freescale MPC83xx SPI controller\n\nThis driver supports the SPI controller on the MPC83xx SoC devices from\nFreescale. Note, this driver supports only the simple shift register SPI\ncontroller and not the descriptor based CPM or QUICCEngine SPI controller.\n\nSigned-off-by: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nCc: Greg KH \u003cgreg@kroah.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "e0c9905e87ac1bc56c9ea8f5b2934aeee53dce26", "tree": "7752a74a70b6e174f347f1d56ab98717e9e93b61", "parents": [ "4cff33f94fefcce1b3c01a9d1da6bb85fe3cbdfa" ], "author": { "name": "Stephen Street", "email": "stephen@streetfiresound.com", "time": "Tue Mar 07 23:53:24 2006 -0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Tue May 16 14:33:56 2006 -0700" }, "message": "[PATCH] SPI: add PXA2xx SSP SPI Driver\n\nThis driver turns a PXA2xx synchronous serial port (SSP) into a SPI master\ncontroller (see Documentation/spi/spi_summary). The driver has the following\nfeatures:\n\n- Support for any PXA2xx SSP\n- SSP PIO and SSP DMA data transfers.\n- External and Internal (SSPFRM) chip selects.\n- Per slave device (chip) configuration.\n- Full suspend, freeze, resume support.\n\nSigned-off-by: Stephen Street \u003cstephen@streetfiresound.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "9c1da3cb46316e40bac766ce45556dc4fd8df3ca", "tree": "d2ab578f2601383f39d316dfca0f00d12da21dba", "parents": [ "022f7b07bf2b384ece7fbd7edb90e54cd78db252" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Sat Jan 21 13:21:43 2006 -0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Mon Feb 06 12:17:17 2006 -0800" }, "message": "[PATCH] SPI: spi_butterfly, restore lost deltas\n\nThis resolves some minor version skew glitches that accumulated for the AVR\nButterfly adapter driver, which caused among other things the existence of\na duplicate Kconfig entry. Most of it boils down to comment updates, but in\none case it removes some now-superfluous code that would be better if not\ncopied into other controller-level drivers.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\n" }, { "commit": "2e10c84b9cf0b2d269c5629048d8d6e35eaf6b2b", "tree": "2b338e8282d4e740529aeb3d5f303c4883f8d667", "parents": [ "5d870c8e216f121307445c71caa72e7e10a20061" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Wed Jan 11 11:23:49 2006 -0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Jan 13 16:29:56 2006 -0800" }, "message": "[PATCH] SPI: add spi_butterfly driver\n\nThis adds a bitbanging parport based adaptor cable for AVR Butterfly, giving\nSPI links to its DataFlash chip and (eventually) firmware running in the card.\n\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "7111763d391b0c5a949a4f2575aa88cd585f0ff6", "tree": "376eef5003b71c6445c02bbe87950b2e365e0758", "parents": [ "8275c642ccdce09a2146d0a9eb022e3698ee927e" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Sun Jan 08 13:34:29 2006 -0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Jan 13 16:29:56 2006 -0800" }, "message": "[PATCH] spi: misc fixes\n\nThis collects some small SPI patches that seem to be missing from the MM tree:\n\n - spi_butterfly kbuild hooks got dropped somehow; this restores them\n - quick fix for a (theoretical?) m25p80_write() oops noted by Andrew\n - quick fix for a potential config-specific oops for mtd_dataflash()\n - minor doc tweaks\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "9904f22a7202c6b54e96b0cc9870817013c350a1", "tree": "02d526b1bf54b1c64e58a9f903269f9cdc6ec83c", "parents": [ "2e5a7bd978bf4118a0c8edf2e6ff81d0a72fee47" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Sun Jan 08 13:34:26 2006 -0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Jan 13 16:29:55 2006 -0800" }, "message": "[PATCH] spi: add spi_bitbang driver\n\nThis adds a bitbanging spi master, hooking up to board/adapter-specific glue\ncode which knows how to set and read the signals (gpios etc).\n\nThis code kicks in after the glue code creates a platform_device with the\nright platform_data. That data includes I/O loops, which will usually\ncome from expanding an inline function (provided in the header). One goal\nis that the I/O loops should be easily optimized down to a few GPIO register\naccesses, in common cases, for speed and minimized overhead.\n\nThis understands all the currently defined protocol tweaking options in the\nSPI framework, and might eventually serve as as reference implementation.\n\n - different word sizes (1..32 bits)\n - differing clock rates\n - SPI modes differing by CPOL (affecting chip select and I/O loops)\n - SPI modes differing by CPHA (affecting I/O loops)\n - delays (usecs) after transfers\n - temporarily deselecting chips in mid-transfer\n\nA lot of hardware could work with this framework, though common types of\ncontroller can\u0027t reach peak performance without switching to a driver\nstructure that supports pipelining of transfers (e.g. DMA queues) and maybe\ncontrollers (e.g. IRQ driven).\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "8ae12a0d85987dc138f8c944cb78a92bf466cea0", "tree": "ca032f25bb26f88cc35d68c6f8065143ce64a6a8", "parents": [ "67daf5f11f06b9b15f8320de1d237ccc2e74fe43" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Sun Jan 08 13:34:19 2006 -0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Jan 13 16:29:54 2006 -0800" }, "message": "[PATCH] spi: simple SPI framework\n\nThis is the core of a small SPI framework, implementing the model of a\nqueue of messages which complete asynchronously (with thin synchronous\nwrappers on top).\n\n - It\u0027s still less than 2KB of \".text\" (ARM). If there\u0027s got to be a\n mid-layer for something so simple, that\u0027s the right size budget. :)\n\n - The guts use board-specific SPI device tables to build the driver\n model tree. (Hardware probing is rarely an option.)\n\n - This version of Kconfig includes no drivers. At this writing there\n are two known master controller drivers (PXA/SSP, OMAP MicroWire)\n and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML\n mentions of other drivers in development.\n\n - No userspace API. There are several implementations to compare.\n Implement them like any other driver, and bind them with sysfs.\n\nThe changes from last version posted to LKML (on 11-Nov-2005) are minor,\nand include:\n\n - One bugfix (removes a FIXME), with the visible effect of making device\n names be \"spiB.C\" where B is the bus number and C is the chipselect.\n\n - The \"caller provides DMA mappings\" mechanism now has kerneldoc, for\n DMA drivers that want to be fancy.\n\n - Hey, the framework init can be subsys_init. Even though board init\n logic fires earlier, at arch_init ... since the framework init is\n for driver support, and the board init support uses static init.\n\n - Various additional spec/doc clarifications based on discussions\n with other folk. It adds a brief \"thank you\" at the end, for folk\n who\u0027ve helped nudge this framework into existence.\n\nAs I\u0027ve said before, I think that \"protocol tweaking\" is the main support\nthat this driver framework will need to evolve.\n\nFrom: Mark Underwood \u003cbasicmark@yahoo.com\u003e\n\n Update the SPI framework to remove a potential priority inversion case by\n reverting to kmalloc if the pre-allocated DMA-safe buffer isn\u0027t available.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" } ] }