)]}' { "log": [ { "commit": "ee6a99b539a50b4e9398938a0a6d37f8bf911550", "tree": "51547e0b9c299be15cc3f54ff3c33b6e3e9c346c", "parents": [ "7dc12d6dd6cc1aa489c6f3e34a75e8023c945da8" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Wed Jul 18 21:49:10 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Jul 18 21:49:10 2007 -0700" }, "message": "[TG3]: Fix msi issue with kexec/kdump.\n\nTina Yang \u003ctina.yang@oracle.com\u003e discovered an MSI related problem\nwhen doing kdump. The problem is that the kexec kernel is booted\nwithout going through system reset, and as a result, MSI may already\nbe enabled when tg3_init_one() is called. tg3_init_one() calls\npci_save_state() which will save the stale MSI state. Later on in\ntg3_open(), we call pci_enable_msi() to reconfigure MSI on the chip\nbefore we reset the chip. After chip reset, we call\npci_restore_state() which will put the stale MSI address/data back\nonto the chip.\n\nThis is no longer a problem in the latest kernel because\npci_restore_state() has been changed to restore MSI state from\ninternal data structures which will guarantee restoring the proper\nMSI state.\n\nBut I think we should still fix it. Our save and restore sequence\ncan still cause very subtle problems down the road. The fix is to\nhave our own functions save and restore precisely what we need. We\nalso change it to save and restore state inside tg3_chip_reset() in a\nmore straight forward way.\n\nThanks to Tina for helping to test and debug the problem.\n\n[ Bump driver version and release date. -DaveM ]\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "6460d948f3ebf7d5040328a60a0ab7221f69945b", "tree": "d7c2a7eda9f20a03698df32bdc4677ca0c2479d5", "parents": [ "febca281f677a775c61cd0572c2f35e4ead9e7d5" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Sat Jul 14 19:07:52 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Jul 14 19:07:52 2007 -0700" }, "message": "[NET]: Add ethtool support for NETIF_F_IPV6_CSUM devices.\n\nAdd ethtool utility function to set or clear IPV6_CSUM feature flag.\nModify tg3.c and bnx2.c to use this function when doing ethtool -K\nto change tx checksum.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "21ba0f88ae56da82a3a15fe54d729208b64c4f4b", "tree": "17ce67f276fe3ea7284c3dc730bdd6a2ec7dfe2f", "parents": [ "dc690d8ef842b464f1c429a376ca16cb8dbee6ae", "36e235901f90fb83215be43cbd8f1ca14661ea40" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Jul 12 13:40:57 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Jul 12 13:40:57 2007 -0700" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6\n\n* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits)\n PCI: Only build PCI syscalls on architectures that want them\n PCI: limit pci_get_bus_and_slot to domain 0\n PCI: hotplug: acpiphp: avoid acpiphp \"cannot get bridge info\" PCI hotplug failure\n PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge\n PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3\n PCI: hotplug: pciehp: wait for 1 second after power off slot\n PCI: pci_set_power_state(): check for PM capabilities earlier\n PCI: cpci_hotplug: Convert to use the kthread API\n PCI: add pci_try_set_mwi\n PCI: pcie: remove SPIN_LOCK_UNLOCKED\n PCI: ROUND_UP macro cleanup in drivers/pci\n PCI: remove pci_dac_dma_... APIs\n PCI: pci-x-pci-express-read-control-interfaces cleanups\n PCI: Fix typo in include/linux/pci.h\n PCI: pci_ids, remove double or more empty lines\n PCI: pci_ids, add atheros and 3com_2 vendors\n PCI: pci_ids, reorder some entries\n PCI: i386: traps, change VENDOR to DEVICE\n PCI: ATM: lanai, change VENDOR to DEVICE\n PCI: Change all drivers to use pci_device-\u003erevision\n ...\n" }, { "commit": "15028aad00ddf241581fbe74a02ec89cbb28d35d", "tree": "7f304a08c3575b7739a6b8e76ea045428e38a0c0", "parents": [ "70b65a2d628d2e66bbf044bb764be64949f3580c" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Wed Jul 11 19:49:22 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Jul 11 19:49:22 2007 -0700" }, "message": "[TG3]: Update version to 3.78.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "70b65a2d628d2e66bbf044bb764be64949f3580c", "tree": "15f39fbf9e6b216bf8d4e1f961a54deb5203ac29", "parents": [ "9ef8ca99749784644602535691f8cf201ee2a225" ], "author": { "name": "Matt Carlson", "email": "mcarlson@broadcom.com", "time": "Wed Jul 11 19:48:50 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Jul 11 19:48:50 2007 -0700" }, "message": "[TG3]: Add missing NVRAM strapping.\n\nThis patch adds a missing NVRAM strapping for 5755 devices.\n\nSigned-off-by: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "9ef8ca99749784644602535691f8cf201ee2a225", "tree": "7836b055d04f88203b8cf563272696d6fe972e95", "parents": [ "e8f3f6cad7e423253090887bc4afe7bc844162da" ], "author": { "name": "Matt Carlson", "email": "mcarlson@broadcom.com", "time": "Wed Jul 11 19:48:29 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Jul 11 19:48:29 2007 -0700" }, "message": "[TG3]: Enable auto MDI.\n\nThis patch adds automatic MDI crossover support when autonegotiation is\nturned off. Automatic MDI crossover allows link to be established\nwithout the use of a crossover cable.\n\nSigned-off-by: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "e8f3f6cad7e423253090887bc4afe7bc844162da", "tree": "78ffc0e193200e90685bf0137bc97153651e2009", "parents": [ "469665459d26da8d0b46c70d070da1e192e48e46" ], "author": { "name": "Matt Carlson", "email": "mcarlson@broadcom.com", "time": "Wed Jul 11 19:47:55 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Jul 11 19:47:55 2007 -0700" }, "message": "[TG3]: Fix the polarity bit.\n\nFor most pre-5705 devices, multiple link interrupts were being generated\nfor a single physical link change. The source of the interrupts was\ndetermined to be unnecessary toggling of the MAC link polarity bit.\n\nThis patch changes the way the link polarity bit gets configured. Where\npossible, code that dynamically configures the bit in response to link\nchanges has been replaced by code that configures the bit once during\ninitialization time and then leaves the bit alone.\n\nFor correctness, this patch also limits the use of the bit to those\ndevices where it is defined, namely devices before the 5705. This patch\nalso corrects the link polarity configurations for 5700 devices when\npaired against a bcm5411 phy.\n\nSigned-off-by: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "469665459d26da8d0b46c70d070da1e192e48e46", "tree": "e64f86c93ad9350c7e042672de12fda26592249a", "parents": [ "db3d99c090e0cdb34b1274767e062bfddbb384bc" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Wed Jul 11 19:47:19 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Jul 11 19:47:19 2007 -0700" }, "message": "[TG3]: Fix irq_sync race condition.\n\nGagan Arneja \u003cgaagaan@gmail.com\u003e pointed out that tg3_reset_task()\ncould potentially race with another thread calling tg3_full_lock()\nsuch as the ethtool_set_xxx() functions. This may trigger the\nBUG_ON() in tg3_irq_quiesce() or cause the irq_sync flag to be out-\nof-sync.\n\nI think the easiest way to fix this is to get the tp-\u003elock first\nbefore setting the irq_sync flag. This is safe to do because the\ntp-\u003elock is never grabbed by the irq handler. This change will\nguarantee that the irq_sync flag updates will be serialized. We also\nhave to change one spot to call tg3_netif_start() (which clears the\nirq_sync flag) before releasing the tp-\u003elock.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "44c10138fd4bbc4b6d6bff0873c24902f2a9da65", "tree": "6e16d3ec80c87490dc743f72da086356f2906ace", "parents": [ "b8a3a5214d7cc115f1ca3a3967b7229d97c46f4a" ], "author": { "name": "Auke Kok", "email": "auke-jan.h.kok@intel.com", "time": "Fri Jun 08 15:46:36 2007 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Wed Jul 11 16:02:10 2007 -0700" }, "message": "PCI: Change all drivers to use pci_device-\u003erevision\n\nInstead of all drivers reading pci config space to get the revision\nID, they can now use the pci_device-\u003erevision member.\n\nThis exposes some issues where drivers where reading a word or a dword\nfor the revision number, and adding useless error-handling around the\nread. Some drivers even just read it for no purpose of all.\n\nIn devices where the revision ID is being copied over and used in what\nappears to be the equivalent of hotpath, I have left the copy code\nand the cached copy as not to influence the driver\u0027s performance.\n\nCompile tested with make all{yes,mod}config on x86_64 and i386.\n\nSigned-off-by: Auke Kok \u003cauke-jan.h.kok@intel.com\u003e\nAcked-by: Dave Jones \u003cdavej@redhat.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "d212f87b068c9d72065ef579d85b5ee6b8b59381", "tree": "a194d5c667c277c7ea5392c9cf97857a0cd1d321", "parents": [ "d3d6dd3adaaad71eae20902ed81808a66a40a5b9" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@linux-foundation.org", "time": "Wed Jun 27 00:47:37 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Tue Jul 10 22:15:52 2007 -0700" }, "message": "[NET]: IPV6 checksum offloading in network devices\n\nThe existing model for checksum offload does not correctly handle\ndevices that can offload IPV4 and IPV6 only. The NETIF_F_HW_CSUM flag\nimplies device can do any arbitrary protocol.\n\nThis patch:\n * adds NETIF_F_IPV6_CSUM for those devices\n * fixes bnx2 and tg3 devices that need it\n * add NETIF_F_IPV6_CSUM to ipv6 output (incl GSO)\n * fixes assumptions about NETIF_F_ALL_CSUM in nat\n * adjusts bridge union of checksumming computation\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "007a880d627aee0e854e793099bb33d0c1130678", "tree": "1421abde7c9ff2793c64225d49452b70ed7ee8c0", "parents": [ "1c92b4e50ef926d1e26fcc056a520e4a7d12478c" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Thu May 31 14:49:51 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Sun Jun 03 18:08:41 2007 -0700" }, "message": "[TG3]: Fix link problem on Dell\u0027s onboard 5906.\n\nThe bug is caused by code that always set\n(TG3_FLAG_USE_MI_INTERRUPT | TG3_FLAG_USE_LINKCHG_REG) on all Dell\u0027s\nonboard devices. With these 2 flags set, the link status is polled\nby tg3_timer() and will only work when the PHY is set up to interrupt\nthe MAC on link changes. This breaks 5906 because the 5906 PHY does\nnot support TG3_FLAG_USE_MI_INTERRUPT the same as other PHYs.\n\nFor correctness, only Dell\u0027s onboard 5701 needs these 2 flags to be\nset. This change will fix the 5906 problem and will change other\nDell devices except 5700 and 5701 to use the more efficient\ninterrupt-driven link changes.\n\nUpdate version to 3.77.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "25805dcf9d83098cf5492117ad2669cd14cc9b24", "tree": "741134040babb0c2bce52d054fa5f08cf530449d", "parents": [ "cb434e380d58d3956c75dc5ead00eced599b9d16" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@linux-foundation.org", "time": "Fri Jun 01 09:44:01 2007 -0700" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sun Jun 03 11:44:20 2007 -0400" }, "message": "network drivers: eliminate unneeded kill_vid code\n\nMany drivers had code that did kill_vid, but they weren\u0027t doing vlan\nfiltering. With new API the stub is unneeded unless device sets\nNETIF_F_HW_VLAN_FILTER.\n\nBad habit: I couldn\u0027t resist fixing a couple of nearby style things\nin acenic, and forcedeth.\n\nSigned-off-by: Stephen Hemminger \u003cshemminger@linux-foundation.org\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "28e53bddf814485699a4142bc056fd37d4e11dd4", "tree": "5182090c4cc2186eedbda3cb90ed82a2836f6ff6", "parents": [ "5830c5902138f80b0a097b797200c739466beedd" ], "author": { "name": "Oleg Nesterov", "email": "oleg@tv-sign.ru", "time": "Wed May 09 02:34:22 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Wed May 09 12:30:53 2007 -0700" }, "message": "unify flush_work/flush_work_keventd and rename it to cancel_work_sync\n\nflush_work(wq, work) doesn\u0027t need the first parameter, we can use cwq-\u003ewq\n(this was possible from the very beginnig, I missed this). So we can unify\nflush_work_keventd and flush_work.\n\nAlso, rename flush_work() to cancel_work_sync() and fix all callers.\nPerhaps this is not the best name, but \"flush_work\" is really bad.\n\n(akpm: this is why the earlier patches bypassed maintainers)\n\nSigned-off-by: Oleg Nesterov \u003coleg@tv-sign.ru\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nCc: \"David S. Miller\" \u003cdavem@davemloft.net\u003e\nCc: Jens Axboe \u003cjens.axboe@oracle.com\u003e\nCc: Tejun Heo \u003chtejun@gmail.com\u003e\nCc: Auke Kok \u003cauke-jan.h.kok@intel.com\u003e,\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "2b3cb2e778811a1df99e37fd7c359837501ab103", "tree": "736b6e149fababf75b1bd0d94a316b790e7f59ae", "parents": [ "19a75d83ffeab004cfcfac64024ad3997bac7220" ], "author": { "name": "Andrew Morton", "email": "akpm@osdl.org", "time": "Wed May 09 02:33:57 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Wed May 09 12:30:51 2007 -0700" }, "message": "tg3: use flush_work_keventd()\n\nConvert tg3 over to flush_work_keventd(). Remove nasty now-unneeded deadlock\navoidance logic.\n\n(akpm: bypassed maintainers, sorry. There are other patches which depend on\nthis)\n\nCc: \"Maciej W. Rozycki\" \u003cmacro@linux-mips.org\u003e\nCc: David Howells \u003cdhowells@redhat.com\u003e\nCc: \"David S. Miller\" \u003cdavem@davemloft.net\u003e\nCc: Michael Chan \u003cmchan@broadcom.com\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nCc: Oleg Nesterov \u003coleg@tv-sign.ru\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "823036ed3291e30f32a905c94db821cd75524b59", "tree": "107b85d908271df83ae820016f9b3ff39794d50d", "parents": [ "c04cb34725fdcf5fdb4135d8fdfaf6f318f10e99" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Mon May 07 00:26:30 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon May 07 00:26:30 2007 -0700" }, "message": "[TG3]: Update version and reldate.\n\nUpdate version to 3.76.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c04cb34725fdcf5fdb4135d8fdfaf6f318f10e99", "tree": "e4194a9f1a9914a25590dab0ca60285b29c9ac15", "parents": [ "8ed5d97e5e0be0fb1aebad16f4c464613a0e472d" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Mon May 07 00:26:15 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon May 07 00:26:15 2007 -0700" }, "message": "[TG3]: Eliminate spurious interrupts.\n\nSpurious interrupts are often encountered especially on systems\nusing the 8259 PIC mode. This is because the I/O write to deassert\nthe interrupt is posted and won\u0027t get to the chip immediately. As\na result, the IRQ may remain asserted after the IRQ handler exits,\ncausing spurious interrupts.\n\nFlush the interrupt mailbox in non-MSI handlers to de-assert the\nIRQ immediately. This seems to be the most straight forward approach\nafter discussion with Jeff Garzik and David Miller.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "8ed5d97e5e0be0fb1aebad16f4c464613a0e472d", "tree": "4088096e3fbc02e671980db1a2f26e1068dec532", "parents": [ "15700770ef7c5d12e2f1659d2ddbeb3f658d9f37" ], "author": { "name": "Matt Carlson", "email": "mcarlson@broadcom.com", "time": "Mon May 07 00:25:49 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon May 07 00:25:49 2007 -0700" }, "message": "[TG3]: Add ASPM workaround.\n\nThis patch adds workaround to fix performance problems caused by slow\nPCIE L1-\u003eL0 transitions on ICH8 platforms.\n\nChanged all magic numbers to constants as suggested by Jeff Garzik.\n\nSigned-off-by: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "7544b0972c1fc1a0e6c54baa1f44c81019743daa", "tree": "90c8ca52ab4bb01b83c51f2c6ea91b1a6854a1a1", "parents": [ "98efd8a6be79550767f5a9be6f3db8e7e9b747da" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Sat May 05 13:08:32 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat May 05 13:08:32 2007 -0700" }, "message": "[TG3]: Add TG3_FLAG_SUPPORT_MSI flag.\n\nAnd fix up the code to always allow MSI on 5714 A2.\n\nCall tg3_find_peer() earlier because we need that information before\nwe can determine whether we can set TG3_FLAG_SUPPORT_MSI or not.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "98efd8a6be79550767f5a9be6f3db8e7e9b747da", "tree": "c2117eb3b6099333594245d81a8d192912f18706", "parents": [ "5cf64b8a7399999439f0d6748babb1ccb6bcad7c" ], "author": { "name": "Matt Carlson", "email": "mcarlson@broadcom.com", "time": "Sat May 05 12:47:25 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat May 05 12:47:25 2007 -0700" }, "message": "[TG3]: Eliminate the TG3_FLAG_5701_REG_WRITE_BUG flag.\n\nThis patch removes the use of the TG3_FLAG_5701_REG_WRITE_BUG flag.\nIt\u0027s logic is only used to set a function pointer and thus the\nlogic can be collapsed and the flag removed.\n\n[ Comment tidy by Christoph Hellwig. -DaveM ]\n\nSigned-off-by: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\n" }, { "commit": "5cf64b8a7399999439f0d6748babb1ccb6bcad7c", "tree": "6357ac40ddf95f171ed8c5f9bdae2ad8755981f1", "parents": [ "986e0aeb9ae09127b401c3baa66f15b7a31f354c" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Sat May 05 12:11:21 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat May 05 12:11:21 2007 -0700" }, "message": "[TG3]: Eliminate the TG3_FLAG_GOT_SERDES_FLOWCTL flag.\n\nThis flag does not do anything useful.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "986e0aeb9ae09127b401c3baa66f15b7a31f354c", "tree": "b2be088a6831cdc65668cf6788e39b91ca36291b", "parents": [ "a85feb8cfc53c08b6f0d770f930ca9cc6885f414" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Sat May 05 12:10:20 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat May 05 12:10:20 2007 -0700" }, "message": "[TG3]: Remove reset during MAC address changes.\n\nThe reset was added a while back so that ASF could re-init whatever\nMAC address it wanted to use after the MAC address was changed.\nInstead of resetting, we can just keep MAC address 1 unchanged during\nMAC address changes if MAC address 1 is different from MAC address 0.\n\nThis fixes 2 problems:\n\n1. Bonding calls set_mac_address in contexts that cannot sleep.\nIt no longer sleeps with the chip reset removed.\n\n2. When ASF shares the same MAC address as the NIC, it needs to\nalways do that even when the MAC address is changed. \n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "a85feb8cfc53c08b6f0d770f930ca9cc6885f414", "tree": "f5806132fb6e60fd7c68a281680e5f05014d5933", "parents": [ "aaf84465fc994e9a840a8c0c6fa842b54cdb3426" ], "author": { "name": "Gary Zambrano", "email": "zambrano@broadcom.com", "time": "Sat May 05 11:52:19 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat May 05 11:52:19 2007 -0700" }, "message": "[TG3]: WoL fixes.\n\nChange TG3_FLAG_SERDES_WOL_CAP to TG3_FLAG_WOL_CAP to make it easier\nto manage WoL. This flag is now used consistently during ethtool WoL\nsetup and power setting changes.\n\nSigned-off-by: Gary Zambrano \u003czambrano@broadcom.com\u003e\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "aaf84465fc994e9a840a8c0c6fa842b54cdb3426", "tree": "a764093806574e4e0416b5ee775d096bc9cf7f13", "parents": [ "989a9d239c5b9ae6053aed6e3819304930baf27d" ], "author": { "name": "Gary Zambrano", "email": "zambrano@broadcom.com", "time": "Sat May 05 11:51:45 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat May 05 11:51:45 2007 -0700" }, "message": "[TG3]: Clear GPIO mask before storing.\n\nThe GPIO settings may change during reset and so the stored values in\ntp-\u003egrc_local_ctrl should be cleared first.\n\nSigned-off-by: Gary Zambrano \u003czambrano@broadcom.com\u003e\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "989a9d239c5b9ae6053aed6e3819304930baf27d", "tree": "d7f14420cea59d0f27ec93ea83191b4ce5ec8a48", "parents": [ "c13e3713857d5ea572cd67f3d5749100b1963ad2" ], "author": { "name": "Matt Carlson", "email": "mcarlson@broadcom.com", "time": "Sat May 05 11:51:05 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat May 05 11:51:05 2007 -0700" }, "message": "[TG3]: Improve NVRAM sizing.\n\nThis patch changes the NVRAM sizing procedure so that the driver can\ntake advantage of devices with 1:1 NVRAM strapping configurations. This\nis useful in cases where the traditional NVRAM sizing method fails. In\nthe event that the flash size cannot be determined, the largest known\nNVRAM size is used. The patch also removes support for 5755 NVRAM\ndevices that are not supported by Broadcom and adds explicit sizing for\nthis device.\n\nSigned-off-by: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c13e3713857d5ea572cd67f3d5749100b1963ad2", "tree": "99484a1ac84b083a58a60e9bcb3dcbeda44a6988", "parents": [ "64a327a7029d3860ddf6a024816afa9e6673eb57" ], "author": { "name": "Matt Carlson", "email": "mcarlson@broadcom.com", "time": "Sat May 05 11:50:04 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat May 05 11:50:04 2007 -0700" }, "message": "[TG3]: Fix TSO bugs.\n\n1. Remove the check for skb-\u003elen greater than MTU when doing TSO.\nWhen the destination has a smaller MSS than the source, a TSO packet\nmay be smaller than the MTU and we still need to process it as a TSO\npacket.\n\n2. On 5705A3 devices with TSO enabled, the DMA engine can hang due to a\nhardware bug. This patch avoids the hanging condition by reducing the\nDMA burst size.\n\nSigned-off-by: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "0278ef8b484a71917bd4f03a763285cdaac10954", "tree": "8f6f7bf2e2a85b4643dfe3d0475811ce858fb4fc", "parents": [ "15c54033964a943de7b0763efd3bd0ede7326395", "cd9ad58d4061494e7fdd70ded7bcf2418daf356a" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Apr 27 09:29:04 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Apr 27 09:29:04 2007 -0700" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6\n\n* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (67 commits)\n [SCSI] SUNESP: Complete driver rewrite to version 2.0\n [SPARC64]: Convert PCI over to generic struct iommu/strbuf.\n [SPARC]: device_node name constification fallout\n [SPARC64]: Convert SBUS over to generic iommu/strbuf structs.\n [SPARC64]: Add generic iommu and strbuf structs to iommu.h\n [SPARC64]: Consolidate {sbus,pci}_iommu_arena.\n [SPARC]: Make device_node name and type const\n [SPARC64]: constify some paramaters of OF routines\n [TIGON3]: of_get_property() returns const.\n [SPARC64]: Fix PCI rework to adhere to of_get_property() const return.\n [SPARC64]: Document and fix calculation of pages_avail.\n [SPARC64]: Make sure pbm-\u003eprom_node is setup easly enough in psycho.c\n [SPARC64]: Use bootmem_bootmap_pages() in choose_bootmap_pfn().\n [SPARC64]: Add proper header file extern for cmdline_memory_size.\n [SPARC64]: Kill sparc_ultra_dump_{i,d}tlb()\n [SPARC64]: Use DECLARE_BITMAP and BITS_TO_LONGS in mm/init.c\n [SPARC64]: Give move verbose show_mem() output just like i386.\n [SPARC64]: Mark show_mem() printk\u0027s with KERN_INFO.\n [SPARC64]: Kill kvaddr_to_phys() and friends.\n [SPARC64]: Privatize sun4u_get_pte() and fix name.\n ...\n" }, { "commit": "374d4cac6283469f101282ca83ee008368bd8350", "tree": "c46a253ba181771cfa18f22674e91da0722ce5fb", "parents": [ "a165b4205e0097c7544ec3c59522a3b20ec14eb1" ], "author": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Thu Mar 29 01:57:57 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Thu Apr 26 01:55:38 2007 -0700" }, "message": "[TIGON3]: of_get_property() returns const.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "49b6e95ff6d05722bcf7a52b00454566ce0c44eb", "tree": "375ebafb01d540fa6eccf8ee7ff4c9891fa73295", "parents": [ "6f85a8597d1d0d8ceeec5a82881c6ddf5cfb45e5" ], "author": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Thu Mar 29 01:38:42 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Thu Apr 26 01:54:53 2007 -0700" }, "message": "[TG3]: Use pci_device_to_OF_node() on sparc.\n\nAnd use CONFIG_SPARC instead of CONFIG_SPARC64 as the\ntest.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "ccf0dec6fcadb4e1c877b9bafb031a6bdb7112b9", "tree": "98617d025f167ad05bb126f0982841ce277ee3af", "parents": [ "6a23acf3905287eb952a6f1dbbc8fb3e4eeae2f6" ], "author": { "name": "Stephen Rothwell", "email": "sfr@canb.auug.org.au", "time": "Thu Mar 29 00:49:54 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Thu Apr 26 01:54:27 2007 -0700" }, "message": "[SPARC/64] constify of_get_property return: drivers\n\nThe only unfortunate bit here is that the name field of struct map_info\nis not const, so for now we put a cast on the assignment of it.\n\nSigned-off-by: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "d626f62b11e00c16e81e4308ab93d3f13551812a", "tree": "fac4af6ced853755e12fc709d55f0c2bec51265d", "parents": [ "2a123b86e2b242a4a6db990d2851d45e192f88e5" ], "author": { "name": "Arnaldo Carvalho de Melo", "email": "acme@redhat.com", "time": "Tue Mar 27 18:55:52 2007 -0300" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Apr 25 22:28:23 2007 -0700" }, "message": "[SK_BUFF]: Introduce skb_copy_from_linear_data{_offset}\n\nTo clearly state the intent of copying from linear sk_buffs, _offset being a\noverly long variant but interesting for the sake of saving some bytes.\n\nSigned-off-by: Arnaldo Carvalho de Melo \u003cacme@redhat.com\u003e\n" }, { "commit": "aa8223c7bb0b05183e1737881ed21827aa5b9e73", "tree": "05c9832326edfeb878472f15cf8133ed9f014cdf", "parents": [ "ab6a5bb6b28a970104a34f0f6959b73cf61bdc72" ], "author": { "name": "Arnaldo Carvalho de Melo", "email": "acme@redhat.com", "time": "Tue Apr 10 21:04:22 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Apr 25 22:25:26 2007 -0700" }, "message": "[SK_BUFF]: Introduce tcp_hdr(), remove skb-\u003eh.th\n\nSigned-off-by: Arnaldo Carvalho de Melo \u003cacme@redhat.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "ab6a5bb6b28a970104a34f0f6959b73cf61bdc72", "tree": "54cfa7d4fe00d0c28a60022b075afc0856d6fc2b", "parents": [ "88c7664f13bd1a36acb8566b93892a4c58759ac6" ], "author": { "name": "Arnaldo Carvalho de Melo", "email": "acme@redhat.com", "time": "Sun Mar 18 17:43:48 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Apr 25 22:25:24 2007 -0700" }, "message": "[TCP]: Introduce tcp_hdrlen() and tcp_optlen()\n\nThe ip_hdrlen() buddy, created to reduce the number of skb-\u003eh.th-\u003e uses and to\navoid the longer, open coded equivalent.\n\nDitched a no-op in bnx2 in the process.\n\nI wonder if we should have a BUG_ON(skb-\u003eh.th-\u003edoff \u003c 5) in tcp_optlen()...\n\nSigned-off-by: Arnaldo Carvalho de Melo \u003cacme@redhat.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "eddc9ec53be2ecdbf4efe0efd4a83052594f0ac0", "tree": "4a38ab4dbd9d61fdf5a5ea6ed61463e0b9e33ba7", "parents": [ "e023dd643798c4f06c16466af90b4d250e4b8bd7" ], "author": { "name": "Arnaldo Carvalho de Melo", "email": "acme@redhat.com", "time": "Fri Apr 20 22:47:35 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Apr 25 22:25:10 2007 -0700" }, "message": "[SK_BUFF]: Introduce ip_hdr(), remove skb-\u003enh.iph\n\nSigned-off-by: Arnaldo Carvalho de Melo \u003cacme@redhat.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c9bdd4b5257406b0608385d19c40b5511decf4f6", "tree": "fe5319c322a11c0b00e7ef0473762a8d1961da83", "parents": [ "0272ffc46f81a4bbbf302ba093c737e969c5bb55" ], "author": { "name": "Arnaldo Carvalho de Melo", "email": "acme@redhat.com", "time": "Mon Mar 12 20:09:15 2007 -0300" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Apr 25 22:25:07 2007 -0700" }, "message": "[IP]: Introduce ip_hdrlen()\n\nFor the common sequence \"skb-\u003enh.iph-\u003eihl * 4\", removing a good number of open\ncoded skb-\u003enh.iph uses, now to go after the rest...\n\nJust out of curiosity, here are the idioms found to get the same result:\n\nskb-\u003enh.iph-\u003eihl \u003c\u003c 2\nskb-\u003enh.iph-\u003eihl\u003c\u003c2\nskb-\u003enh.iph-\u003eihl * 4\nskb-\u003enh.iph-\u003eihl*4\n(skb-\u003enh.iph)-\u003eihl * sizeof(u32)\n\nSigned-off-by: Arnaldo Carvalho de Melo \u003cacme@redhat.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "b8fa2f3a82069304acac1f9e957d491585f4f49a", "tree": "8fc4023a131d17fc74835bf0c955280e35a3afdf", "parents": [ "161980f4c6b846625efe6227420175cb41477de3" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Fri Apr 06 17:35:37 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Apr 06 17:35:37 2007 -0700" }, "message": "[TG3]: Fix crash during tg3_init_one().\n\nThe driver will crash when the chip has been initialized by EFI before\ntg3_init_one(). In this case, the driver will call tg3_chip_reset()\nbefore allocating consistent memory.\n\nThe bug is fixed by checking for tp-\u003ehw_status before accessing it\nduring tg3_chip_reset().\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "20bd7dd4cabfd0d6b6b70b99e88df901480a9841", "tree": "d3982e64e78aed717d158c426a79a156333db9e6", "parents": [ "d18edcb212d7dc864a59e6aa9b6b9826299e0210" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Sat Mar 24 20:58:51 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Sun Mar 25 18:48:09 2007 -0700" }, "message": "[TG3]: Update version and reldate.\n\nUpdate version to 3.75.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "d18edcb212d7dc864a59e6aa9b6b9826299e0210", "tree": "341955faabd7db53af392f4bdbd856dcbe6f8d11", "parents": [ "1c46ae05d96f77f349ae60c799acb6ac6ddf07a8" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Sat Mar 24 20:57:11 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Sun Mar 25 18:48:08 2007 -0700" }, "message": "[TG3]: Exit irq handler during chip reset.\n\nOn most tg3 chips, the memory enable bit in the PCI command register\ngets cleared during chip reset and must be restored before accessing\nPCI registers using memory cycles. The chip does not generate\ninterrupt during chip reset, but the irq handler can still be called\nbecause of irq sharing or irqpoll. Reading a register in the irq\nhandler can cause a master abort in this scenario and may result in a\ncrash on some architectures.\n\nUse the TG3_FLAG_CHIP_RESETTING flag to tell the irq handler to exit\nwithout touching any registers. The checking of the flag is in the\n\"slow\" path of the irq handler and will not affect normal performance.\nThe msi handler is not shared and therefore does not require checking\nthe flag.\n\nThanks to Bernhard Walle \u003cbwalle@suse.de\u003e for reporting the problem.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "1c46ae05d96f77f349ae60c799acb6ac6ddf07a8", "tree": "74179101bea9c624cbb7cd96d3b366c21743614c", "parents": [ "f11e6659ce9058928d73ff440f9b40a818d628ab" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Sat Mar 24 20:54:37 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Sun Mar 25 18:48:06 2007 -0700" }, "message": "[TG3]: Eliminate the unused TG3_FLAG_SPLIT_MODE flag.\n\nThis flag to support multiple PCIX split completions was never used\nbecause of hardware bugs. This will make room for a new flag.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5c15bdec5c38f4ccf73ef2585fc80a6164de9554", "tree": "c99084e96238eb9ce40e8d9d90e0097c4e92111d", "parents": [ "b5284e5aa94be2f88dc92b29e97aff3da0c45f9f" ], "author": { "name": "Dan Aloni", "email": "da-x@monatomic.org", "time": "Fri Mar 02 20:44:51 2007 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Mar 02 20:44:51 2007 -0800" }, "message": "[VLAN]: Avoid a 4-order allocation.\n\nThis patch splits the vlan_group struct into a multi-allocated struct. On\nx86_64, the size of the original struct is a little more than 32KB, causing\na 4-order allocation, which is prune to problems caused by buddy-system\nexternal fragmentation conditions.\n\nI couldn\u0027t just use vmalloc() because vfree() cannot be called in the\nsoftirq context of the RCU callback.\n\nSigned-off-by: Dan Aloni \u003cda-x@monatomic.org\u003e\nAcked-by: Jeff Garzik \u003cjeff@garzik.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "7f62ad5d37f4e43c841e92c6f159c93dcf2d2cdd", "tree": "f8d0e5d2dcc5e7783ace1f966b9e008278357067", "parents": [ "ad930650c0e694233971c56e8de8e78b896e2613" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Tue Feb 20 23:25:40 2007 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Mon Feb 26 11:42:47 2007 -0800" }, "message": "[TG3]: TSO workaround fixes.\n\n1. Add race condition check after netif_stop_queue(). tg3_tx() runs\n without netif_tx_lock and can race with tg3_start_xmit_dma_bug() -\u003e\n tg3_tso_bug().\n\n2. Firmware TSO in 5703/5704/5705 also have the same TSO limitation,\n i.e. they cannot handle TSO headers bigger than 80 bytes. Rename\n TG3_FL2_HW_TSO_1_BUG to TG3_FL2_TSO_BUG and set this flag on\n these chips as well.\n\n3. Update version to 3.74.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "65610fbab35b0570df4a9d0e77e111f85606b312", "tree": "1bb463aed953a3f8b93b4c9e70774b9d37e8c713", "parents": [ "b0408751128edc126eb37798d51891d8d0a41dc6" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Tue Feb 13 12:18:46 2007 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Feb 13 12:18:46 2007 -0800" }, "message": "[TG3]: Update copyright, version, and reldate.\n\nUpdate version to 3.73.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "b0408751128edc126eb37798d51891d8d0a41dc6", "tree": "2d26a34291cdc8a2facedff360b813886d4da6f9", "parents": [ "569a5df8597deeaa39867be73c7305fd82522f57" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Tue Feb 13 12:18:30 2007 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Feb 13 12:18:30 2007 -0800" }, "message": "[TG3]: Add some tx timeout debug messages.\n\nPrint the most useful information during tx timeout to help debug.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "569a5df8597deeaa39867be73c7305fd82522f57", "tree": "a49d58a45867f7255faf3c08d00830618b4d73c3", "parents": [ "5129724aa5de3a71fc70e71ca49d542ca1a5aa1e" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Tue Feb 13 12:18:15 2007 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Feb 13 12:18:15 2007 -0800" }, "message": "[TG3]: Use constant for PHY register 0x1e.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5129724aa5de3a71fc70e71ca49d542ca1a5aa1e", "tree": "ec00f82aa17a7c47a8b3763e150a9fafd4115fea", "parents": [ "d7b0a8573c9ac8923bf6f205f4ce60dd2ac811d5" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Tue Feb 13 12:17:57 2007 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Feb 13 12:17:57 2007 -0800" }, "message": "[TG3]: Power down 5704 serdes transceiver when shutting down.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "d7b0a8573c9ac8923bf6f205f4ce60dd2ac811d5", "tree": "c787b47bdd597e8518f4ca25d2f2280f86a64401", "parents": [ "d4011adaf8b5ea555357a40388ee9aa7ed2daf9f" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Tue Feb 13 12:17:38 2007 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Feb 13 12:17:38 2007 -0800" }, "message": "[TG3]: 5906 doesn\u0027t need to switch to slower clock.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "d4011adaf8b5ea555357a40388ee9aa7ed2daf9f", "tree": "49dd5af30dd5eb3263284ec503db6a0a7be52a4d", "parents": [ "49afdeb65bb917e22cf9116bc31380befe9db890" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Tue Feb 13 12:17:25 2007 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Feb 13 12:17:25 2007 -0800" }, "message": "[TG3]: 5722/5756 don\u0027t need PHY jitter workaround.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "49afdeb65bb917e22cf9116bc31380befe9db890", "tree": "1e9ef01eb288712cd064a1ec723dbdf751162388", "parents": [ "436f137975507b0baab0859a253c3c9332c22f62" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Tue Feb 13 12:17:03 2007 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Feb 13 12:17:03 2007 -0800" }, "message": "[TG3]: Use lower DMA watermark for 5703.\n\nSet DMA read watermark to 4 on 5703 in PCIX mode. This is needed to\nprevent some tx timeouts.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "436f137975507b0baab0859a253c3c9332c22f62", "tree": "482799400e745c518ee32ad9fa22b02bb4d20ed1", "parents": [ "e2e01bfef8399c8f39c9fdf4a5576039069e760c" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Tue Feb 13 12:16:45 2007 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Feb 13 12:16:45 2007 -0800" }, "message": "[TG3]: Save MSI state before suspend.\n\nThis fixes the following problem:\n\nhttp://bugzilla.kernel.org/show_bug.cgi?id\u003d7969\n\nThe MSI state needs to be saved during suspend. PCI state saved\nduring tg3_init_one() does not contain valid MSI state because\nMSI hasn\u0027t been enabled.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "6b31a515e3401685cdab2eeb6692f1a0f53f72ca", "tree": "ad8bcb3bb7b9974fdd18c5c8f976fc23680be620", "parents": [ "0f08461ebf89e10f7db9042fb028359b810c3c81" ], "author": { "name": "Eric Dumazet", "email": "dada1@cosmosbay.com", "time": "Tue Feb 06 13:29:21 2007 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Thu Feb 08 12:38:57 2007 -0800" }, "message": "[TG3]: Avoid an expensive divide.\n\nDuring an oprofile session of linux-2.6.20 on a dual opteron system, I noticed\nan expensive divide was done in tg3_poll().\n\nI am using gcc-4.1.1, so the following comment from drivers/net/tg3.c seems\nover-optimistic :\n\n/* Do not place this n-ring entries value into the tp struct itself,\n * we really want to expose these constants to GCC so that modulo et\n * al. operations are done with shifts and masks instead of with\n * hw multiply/modulo instructions. Another solution would be to\n * replace things like \u0027% foo\u0027 with \u0027\u0026 (foo - 1)\u0027.\n */\n#define TG3_RX_RCB_RING_SIZE(tp) \\\n ((tp-\u003etg3_flags2 \u0026 TG3_FLG2_5705_PLUS) ? 512 : 1024)\n\nAssembly code before patch :\n(oprofile results included)\n 6434 0.0088 :ffffffff803684b9: mov 0x6f0(%r15),%eax\n 587 8.0e-04 :ffffffff803684c0: and $0x40000,%eax\n 2170 0.0030 :ffffffff803684c5: cmp $0x1,%eax\n :ffffffff803684c8: lea 0x1(%r13),%eax\n :ffffffff803684cc: sbb %ecx,%ecx\n 2051 0.0028 :ffffffff803684ce: xor %edx,%edx\n :ffffffff803684d0: and $0x200,%ecx\n 20 2.7e-05 :ffffffff803684d6: add $0x200,%ecx\n 1986 0.0027 :ffffffff803684dc: div %ecx\n103427 0.1410 :ffffffff803684de: cmp %edx,0xffffffffffffff7c(%rbp)\n\nAssembly code after the suggested patch :\n\nffffffff803684b9: mov 0x6f0(%r15),%eax\nffffffff803684c0: and $0x40000,%eax\nffffffff803684c5: cmp $0x1,%eax\nffffffff803684c8: sbb %eax,%eax\nffffffff803684ca: inc %r13d\nffffffff803684cd: and $0x200,%eax\nffffffff803684d2: add $0x1ff,%eax\nffffffff803684d7: and %eax,%r13d\nffffffff803684da: cmp %r13d,0xffffffffffffff7c(%rbp)\n\nSigned-off-by: Eric Dumazet \u003cdada1@cosmosbay.com\u003e\nAcked-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "1d39ed565cfcc7c4fe586de621aef495c4f94ffb", "tree": "af3280a25eb796385c851dc7b83e82f0ff38f1ac", "parents": [ "6d24998f07588ca83ce04e60af5a79e805df7532" ], "author": { "name": "Arjan van de Ven", "email": "arjan@linux.intel.com", "time": "Tue Dec 12 14:06:23 2006 +0100" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Mon Feb 05 16:58:45 2007 -0500" }, "message": "remove NETIF_F_TSO ifdefery\n\nRemove the NETIF_F_TSO #ifdef-ery in drivers/net; this was\nfor old-old-2.4 compat (even current 2.4 has NETIF_F_TSO)\nbut it\u0027s time to get rid of it by now.\n\nSigned-off-by: Arjan van de Ven \u003carjan@linux.intel.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "c1d2a1965a00693bddaddf75d57488a0d8e891af", "tree": "5658caed34980b6edb302b3fc0103a5d61e7dbb4", "parents": [ "d6aa4acebafe3acb0aade7704ec5b2f03742ea14" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Mon Jan 08 19:57:20 2007 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Tue Jan 09 00:30:06 2007 -0800" }, "message": "[TG3]: Add PHY workaround for 5755M.\n\nSome PHY trim values need to be fine-tuned on 5755M to be\nIEEE-compliant.\n\nUpdate version to 3.72.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "749494bad9ca170e404b8dcebe8422df0d79b3ac", "tree": "229544cf5dd75006ded78124269481c3985dfd58", "parents": [ "60189ddff03ffce1f0442a7591b2abafdf47e6a3" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Sun Dec 17 17:08:30 2006 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Sun Dec 17 21:59:23 2006 -0800" }, "message": "[TG3]: Update version and reldate.\n\nUpdate version to 3.71.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "60189ddff03ffce1f0442a7591b2abafdf47e6a3", "tree": "25d3c5c8211fd57942ae0a57d82c66ad4b2110c5", "parents": [ "c49a1561ee4b663d2819b5bea3e4684eae217b19" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Sun Dec 17 17:08:07 2006 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Sun Dec 17 21:59:22 2006 -0800" }, "message": "[TG3]: Power down/up 5906 PHY correctly.\n\nThe 5906 PHY requires a special register bit to power down and up the\nPHY.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c49a1561ee4b663d2819b5bea3e4684eae217b19", "tree": "59909de4a5cba3bb84ee4b09fd793af46efc0f4f", "parents": [ "24fcad6b3ca3bdbbb4614de3edc1ff16f594ba9a" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Sun Dec 17 17:07:29 2006 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Sun Dec 17 21:59:20 2006 -0800" }, "message": "[TG3]: Fix race condition when calling register_netdev().\n\nHot-plug scripts can call tg3_open() as soon as register_netdev() is\ncalled in tg3_init_one(). We need to call pci_set_drvdata() before\nregister_netdev(), and netif_carrier_off() needs to be moved to\ntg3_open() to avoid race conditions.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "24fcad6b3ca3bdbbb4614de3edc1ff16f594ba9a", "tree": "1c1c7e830472218da1f5a8f40d2acfea06601c95", "parents": [ "9b54d5c610fc5ba191d28c356b81999e81d9b515" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Sun Dec 17 17:06:46 2006 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Sun Dec 17 21:59:19 2006 -0800" }, "message": "[TG3]: Assign tp-\u003elink_config.orig_* values.\n\ntp-\u003elink_config.orig_* values must be assigned during\ntg3_set_settings() because these values will be used to setup the\nlink speed during tg3_open(). Without these assignments, the link\nspeed settings will be all messed by if tg3_set_settings() is called\nwhen the device is down.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "bd2b334378530f6dbe03f6325b8c885524e298a3", "tree": "c45be1ccd568ac9076a3ce13ddaca1c2e2e0c47d", "parents": [ "e25db641c0e6dd49c5db24dbe154048d4a466727" ], "author": { "name": "Yan Burman", "email": "burman.yan@gmail.com", "time": "Thu Dec 14 15:25:00 2006 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Sun Dec 17 21:59:06 2006 -0800" }, "message": "[TG3]: replace kmalloc+memset with kzalloc\n\nReplace kmalloc+memset with kzalloc\n\nSigned-off-by: Yan Burman \u003cburman.yan@gmail.com\u003e\nAcked-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "cbb45d21fb2fcbcafc19ea859350f564252a0878", "tree": "704fbabcffa097951414fd69234d375381347c35", "parents": [ "9d57f01c1331cb7bfd0a9d4f7723da5b9329394f" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Thu Dec 07 00:24:09 2006 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Dec 07 00:24:09 2006 -0800" }, "message": "[TG3]: Identify Serdes devices more clearly.\n\nChange the message to more clearly identify Serdes devices.\n\nUpdate version to 3.70.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "9d57f01c1331cb7bfd0a9d4f7723da5b9329394f", "tree": "bb3c2a53146500196c2707de5290bb084725e6ae", "parents": [ "9f88f29fc502192824aba092e90af1297a87eb82" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Thu Dec 07 00:23:25 2006 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Dec 07 00:23:25 2006 -0800" }, "message": "[TG3]: Use msleep.\n\nChange some udelay() in some eeprom functions to msleep(). Eeprom\nrelated functions are always called from sleepable context.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "9f88f29fc502192824aba092e90af1297a87eb82", "tree": "a0a718020af8dc02e345c0815c0b9437bc8a878d", "parents": [ "3600d918d870456ea8e7bb9d47f327de5c20f3d6" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Thu Dec 07 00:22:54 2006 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Dec 07 00:22:54 2006 -0800" }, "message": "[TG3]: Use netif_msg_*.\n\nUse netif_msg_* to turn on or off some messages.\n\nBased on Stephen Hemminger\u0027s initial patch.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "3600d918d870456ea8e7bb9d47f327de5c20f3d6", "tree": "535cef03d0a422741b4c361048f7dda54df30622", "parents": [ "9d26e213423923c9e033ccd373705118131827c9" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Thu Dec 07 00:21:48 2006 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Dec 07 00:21:48 2006 -0800" }, "message": "[TG3]: Allow partial speed advertisement.\n\nHonor the advertisement bitmask from ethtool. We used to always\nadvertise the full capability when autoneg was set to on.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "9d26e213423923c9e033ccd373705118131827c9", "tree": "182ec37041687479c2e4697463e77a1b195b9d26", "parents": [ "676917d488212303ce4a7d033815ce8799201010" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Thu Dec 07 00:21:14 2006 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Dec 07 00:21:14 2006 -0800" }, "message": "[TG3]: Add TG3_FLG2_IS_NIC flag.\n\nAdd Tg3_FLG2_IS_NIC flag to unambiguously determine whether the\ndevice is NIC or onboard. Previously, the EEPROM_WRITE_PROT flag was\noverloaded to also mean onboard. With the separation, we can\nsupport some devices that are onboard but do not use eeprom write\nprotect.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "676917d488212303ce4a7d033815ce8799201010", "tree": "b191b3b5859cb613b710b2ad1ff37c58fe3ccb5d", "parents": [ "5d64ad34f468278ce66f9eb4d876dd221490e94c" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Thu Dec 07 00:20:22 2006 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Dec 07 00:20:22 2006 -0800" }, "message": "[TG3]: Add 5787F device ID.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5d64ad34f468278ce66f9eb4d876dd221490e94c", "tree": "afbb4b855a912592ac6f179e146af000810fa56b", "parents": [ "456c38f9682645cbb0537cb4e16848a28c1d3a76" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Thu Dec 07 00:19:40 2006 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Dec 07 00:19:40 2006 -0800" }, "message": "[TG3]: Fix Phy loopback.\n\nPhy loopback on most 10/100 devices need to be run in 1Gbps mode in\nGMII mode.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c4028958b6ecad064b1a6303a6a5906d4fe48d73", "tree": "1c4c89652c62a75da09f9b9442012007e4ac6250", "parents": [ "65f27f38446e1976cc98fd3004b110fedcddd189" ], "author": { "name": "David Howells", "email": "dhowells@redhat.com", "time": "Wed Nov 22 14:57:56 2006 +0000" }, "committer": { "name": "David Howells", "email": "dhowells@redhat.com", "time": "Wed Nov 22 14:57:56 2006 +0000" }, "message": "WorkStruct: make allyesconfig\n\nFix up for make allyesconfig.\n\nSigned-Off-By: David Howells \u003cdhowells@redhat.com\u003e\n" }, { "commit": "12862086f24d7382b24379bbcbe0dadf12ca5945", "tree": "e1fc65a347e23171d28054eeb97316dd255bb97a", "parents": [ "f2776ff047229c3e7cee2454e2704dd6f98fa32f" ], "author": { "name": "Ira W. Snyder", "email": "kernel@irasnyder.com", "time": "Tue Nov 21 17:44:31 2006 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Nov 21 17:44:31 2006 -0800" }, "message": "[TG3]: Add missing unlock in tg3_open() error path.\n\nSparse noticed a locking imbalance in tg3_open(). This patch adds an\nunlock to one of the error paths, so that tg3_open() always exits\nwithout the lock held.\n\nSigned-off-by: Ira W. Snyder \u003ckernel@irasnyder.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c7835a77c86422d276b0d1a4c70924d933014c13", "tree": "a0f4ee32a55d8b360b814f6ef811be268db71c2f", "parents": [ "52bf376c63eebe72e862a1a6e713976b038c3f50" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Wed Nov 15 21:14:42 2006 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Nov 15 21:18:52 2006 -0800" }, "message": "[TG3]: Disable TSO on 5906 if CLKREQ is enabled.\n\nDue to hardware errata, TSO must be disabled if the PCI Express clock\nrequest is enabled on 5906. The chip may hang when transmitting TSO\nframes if CLKREQ is enabled.\n\nUpdate version to 3.69.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "0ccead1869444891ae6b41f2c5fc8498521c908e", "tree": "508dacf852deab9c26f8f3d3071cdaf456f6990b", "parents": [ "44597f65f6af3c692560a639f61d25398d13d1b6" ], "author": { "name": "Gary Zambrano", "email": "zambrano@broadcom.com", "time": "Tue Nov 14 16:34:00 2006 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Nov 15 21:18:46 2006 -0800" }, "message": "[TG3]: Increase 5906 firmware poll time.\n\nNewer 5906 bootcode needs about 7ms to finish resetting so the poll\nfirmware loop was changed to maximum 20ms.\n\nSigned-off-by: Gary Zambrano \u003czambrano@broadcom.com\u003e\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nAcked-by: Jeff Garzik \u003cjeff@garzik.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "af2c6a4aaa2253f1e29df8fb59a3d92174d30a33", "tree": "5eb583eb426b70c342d7a5a0577b44564de70538", "parents": [ "25f484a62e41be8020b9a31bf50a792baa58d2d4" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Tue Nov 07 14:57:51 2006 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Tue Nov 07 15:10:16 2006 -0800" }, "message": "[TG3]: Fix array overrun in tg3_read_partno().\n\nUse proper upper limits for the loops and check for all error\nconditions.\n\nThe problem was noticed by Adrian Bunk.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "36da4d869f23bc7d1a70a3185218cb626537845c", "tree": "87ca921f64c2e10d24adbd5fb75cd40b651d1f9c", "parents": [ "febf0a431e42f5a1fdb2b763273700610552ddcc" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Fri Nov 03 01:01:03 2006 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Sun Nov 05 14:11:30 2006 -0800" }, "message": "[TG3]: Fix 2nd ifup failure on 5752M.\n\nThis fixes a bug reported in:\n\nhttp://bugzilla.kernel.org/show_bug.cgi?id\u003d7438\n\ntg3_close() turns off the PHY if WoL and ASF are both disabled. On\nthe next tg3_open(), some devices such as the 5752M will not be\nbrought up correctly without a PHY reset early in the reset sequence.\nThe PHY clock is needed for some internal MAC blocks to function\ncorrectly.\n\nThis problem is fixed by always resetting the PHY early in\ntg3_reset_hw() when it is called from tg3_open() or tg3_resume().\ntg3_setup_phy() can then be called later in the sequence without the\nreset_phy parameter set to 1, since the PHY reset is already done.\n\nUpdate version to 3.68.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "6ba7511b7c8b71d5148f7516584d0b677acc384a", "tree": "6bbee4a1555f8a85bfcde2c0dac03145fb5067f1", "parents": [ "bc3a9254a7925b6278f6d882746fe6a0bdf6f610" ], "author": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 18 20:56:06 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 18 20:56:06 2006 -0700" }, "message": "[TG3]: Bump driver version and release date.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "bc3a9254a7925b6278f6d882746fe6a0bdf6f610", "tree": "862059bc23a8b602da144adef1f237afb0668489", "parents": [ "42952231c6a8623117ee3cc89c82d382dc69ca30" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Wed Oct 18 20:55:18 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Oct 18 20:55:18 2006 -0700" }, "message": "[TG3]: Add lower bound checks for tx ring size.\n\nThe minimum tx ring size must be greater than MAX_SKB_FRAGS or 3\ntimes that on some chips with TSO bugs.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "42952231c6a8623117ee3cc89c82d382dc69ca30", "tree": "8c4db924ae0e1cebfcbedd7da75008675a36c523", "parents": [ "5175c3786c244f8b689854db24c9e79b1c6a084f" ], "author": { "name": "Ranjit Manomohan", "email": "ranjitm@google.com", "time": "Wed Oct 18 20:54:26 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Oct 18 20:54:26 2006 -0700" }, "message": "[TG3]: Fix set ring params tx ring size implementation\n\nFixes the implementation of the ethtool set ring parameters for the\ntg3 transmit ring. The size of tx_pending is taken into account\nbefore doing a netif_wake_queue. This prevents the interface from\nlocking up when smaller transmit ring sizes are used.\n\nSigned-off-by: Ranjit Manomohan \u003cranjitm@google.com\u003e\nAcked-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "7d12e780e003f93433d49ce78cfedf4b4c52adc5", "tree": "6748550400445c11a306b132009f3001e3525df8", "parents": [ "da482792a6d1a3fbaaa25fae867b343fb4db3246" ], "author": { "name": "David Howells", "email": "dhowells@redhat.com", "time": "Thu Oct 05 14:55:46 2006 +0100" }, "committer": { "name": "David Howells", "email": "dhowells@warthog.cambridge.redhat.com", "time": "Thu Oct 05 15:10:12 2006 +0100" }, "message": "IRQ: Maintain regs pointer globally rather than passing to IRQ handlers\n\nMaintain a per-CPU global \"struct pt_regs *\" variable which can be used instead\nof passing regs around manually through all ~1800 interrupt handlers in the\nLinux kernel.\n\nThe regs pointer is used in few places, but it potentially costs both stack\nspace and code to pass it around. On the FRV arch, removing the regs parameter\nfrom all the genirq function results in a 20% speed up of the IRQ exit path\n(ie: from leaving timer_interrupt() to leaving do_IRQ()).\n\nWhere appropriate, an arch may override the generic storage facility and do\nsomething different with the variable. On FRV, for instance, the address is\nmaintained in GR28 at all times inside the kernel as part of general exception\nhandling.\n\nHaving looked over the code, it appears that the parameter may be handed down\nthrough up to twenty or so layers of functions. Consider a USB character\ndevice attached to a USB hub, attached to a USB controller that posts its\ninterrupts through a cascaded auxiliary interrupt controller. A character\ndevice driver may want to pass regs to the sysrq handler through the input\nlayer which adds another few layers of parameter passing.\n\nI\u0027ve build this code with allyesconfig for x86_64 and i386. I\u0027ve runtested the\nmain part of the code on FRV and i386, though I can\u0027t test most of the drivers.\nI\u0027ve also done partial conversion for powerpc and MIPS - these at least compile\nwith minimal configurations.\n\nThis will affect all archs. Mostly the changes should be relatively easy.\nTake do_IRQ(), store the regs pointer at the beginning, saving the old one:\n\n\tstruct pt_regs *old_regs \u003d set_irq_regs(regs);\n\nAnd put the old one back at the end:\n\n\tset_irq_regs(old_regs);\n\nDon\u0027t pass regs through to generic_handle_irq() or __do_IRQ().\n\nIn timer_interrupt(), this sort of change will be necessary:\n\n\t-\tupdate_process_times(user_mode(regs));\n\t-\tprofile_tick(CPU_PROFILING, regs);\n\t+\tupdate_process_times(user_mode(get_irq_regs()));\n\t+\tprofile_tick(CPU_PROFILING);\n\nI\u0027d like to move update_process_times()\u0027s use of get_irq_regs() into itself,\nexcept that i386, alone of the archs, uses something other than user_mode().\n\nSome notes on the interrupt handling in the drivers:\n\n (*) input_dev() is now gone entirely. The regs pointer is no longer stored in\n the input_dev struct.\n\n (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does\n something different depending on whether it\u0027s been supplied with a regs\n pointer or not.\n\n (*) Various IRQ handler function pointers have been moved to type\n irq_handler_t.\n\nSigned-Off-By: David Howells \u003cdhowells@redhat.com\u003e\n(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)\n" }, { "commit": "1533d382155ee888d9621391c108ffb7a68bb25d", "tree": "92e59711126e7213d0c4a5a3661f4ab0e414addd", "parents": [ "b16250e3d1c55820f08f0296624a423122ea9805" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Wed Sep 27 16:10:35 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Thu Sep 28 18:01:43 2006 -0700" }, "message": "[TG3]: Update version and reldate.\n\nUpdate version to 3.66.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "b16250e3d1c55820f08f0296624a423122ea9805", "tree": "9559f4acd5e740b727c42e635699b7427f21d3c3", "parents": [ "715116a12610b67c1d301a9b845ce95f7247dad3" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Wed Sep 27 16:10:14 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Thu Sep 28 18:01:42 2006 -0700" }, "message": "[TG3]: Add 5709 self-test support.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "715116a12610b67c1d301a9b845ce95f7247dad3", "tree": "1f9b680e4cfc32cc7759b82481f104eae6e22f24", "parents": [ "b5d3772ccbe0bc5ac8ffbb5356b74ca698aee28c" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Wed Sep 27 16:09:25 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Thu Sep 28 18:01:41 2006 -0700" }, "message": "[TG3]: Add 5709 PHY support.\n\nAdd support for the 5709 10/100 PHY.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "b5d3772ccbe0bc5ac8ffbb5356b74ca698aee28c", "tree": "ef5f1e64d6e656a4931e22efed5809eb42d0e39f", "parents": [ "7a6f4369449a471a6e5718a87c53ac75a46960ba" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Wed Sep 27 16:06:21 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Thu Sep 28 18:01:40 2006 -0700" }, "message": "[TG3]: Add basic 5906 support.\n\nAdd support for the new 5709 device. This is a new 10/100 Mbps chip.\nThe mailbox access and firmware interface are quite different from\nall other tg3 chips.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "7a6f4369449a471a6e5718a87c53ac75a46960ba", "tree": "16de5bf219d8c9730ff4ac0f4a06eb9b0e975f73", "parents": [ "126a336822a6594662f5898f1ddf33e6d048fcc7" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Wed Sep 27 16:03:31 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Thu Sep 28 18:01:39 2006 -0700" }, "message": "[TG3]: Add tg3_poll_fw().\n\nPut the firmware polling logic into a separate function. This makes\nthe code cleaner.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "126a336822a6594662f5898f1ddf33e6d048fcc7", "tree": "b8bf224c080868d0f2e89c55eef1b23e2b6a2bc9", "parents": [ "3f7045c1f28bedd44389b9392b54c6fdb83ee5c6" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Wed Sep 27 16:03:07 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Thu Sep 28 18:01:38 2006 -0700" }, "message": "[TG3]: Add 5722 and 5756 support.\n\nAdd IDs to support 5722 and 5756.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "3f7045c1f28bedd44389b9392b54c6fdb83ee5c6", "tree": "c504ff6ea5aa82500a43929fe10333060bc691d1", "parents": [ "130b8e4d0e4edadcecee9fdff2c32f33d77c4fe9" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Wed Sep 27 16:02:29 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Thu Sep 28 18:01:36 2006 -0700" }, "message": "[TG3]: PHY fixes.\n\nSome PHY related fixes:\n\n1. Fix Serdes WoL.\n2. Fix loopback test on 10/100 only devices.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "130b8e4d0e4edadcecee9fdff2c32f33d77c4fe9", "tree": "1c0f165309fa5a6b5d23fdad038ae932470d0cf9", "parents": [ "3d3ebe741b2c06fe3df67739d09f6ef0e25ee41a" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Wed Sep 27 16:00:40 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Thu Sep 28 18:01:35 2006 -0700" }, "message": "[TG3]: Improve ASF heartbeat.\n\nChange to a different ASF heartbeat message code to improve\nreliability.\n\nThere were some reports of unintended resets on real time kernels\nwhere the timer may be slow and cause the heartbeat to be late.\nNetpoll will also have the same problem because the timer irq will\nbe unavailable.\n\nUsing the new heartbeat code, the ASF firmware will also check the\nring condition before resetting the chip when the heartbeat is\nexpiring.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "3d3ebe741b2c06fe3df67739d09f6ef0e25ee41a", "tree": "f9112f5b5beac57673a26563a3a50517c5c96798", "parents": [ "6ac59344ef25d5f0ebadb5663cf700d25d2a3886" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Wed Sep 27 15:59:15 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Thu Sep 28 18:01:34 2006 -0700" }, "message": "[TG3]: Improve 5704S autoneg.\n\nImprove 5704S autoneg logic by using a serdes_counter field to keep\ntrack of the transient states. This eliminates a 200 msec busy\nloop in the code. Autoneg will take its course without the driver\nbusy waiting for it to finish.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "a319a2773a13bab56a0d0b3744ba8703324313b5", "tree": "f02c86acabd1031439fd422a167784007e84ebb1", "parents": [ "e18fa700c9a31360bc8f193aa543b7ef7b39a06b", "183798799216fad36c7219fe8d4d6dee6b8fa755" ], "author": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Sun Sep 24 10:15:13 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Sun Sep 24 10:15:13 2006 -0700" }, "message": "Merge branch \u0027upstream-linus\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6\n\n* \u0027upstream-linus\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (217 commits)\n net/ieee80211: fix more crypto-related build breakage\n [PATCH] Spidernet: add ethtool -S (show statistics)\n [NET] GT96100: Delete bitrotting ethernet driver\n [PATCH] mv643xx_eth: restrict to 32-bit PPC_MULTIPLATFORM\n [PATCH] Cirrus Logic ep93xx ethernet driver\n r8169: the MMIO region of the 8167 stands behin BAR#1\n e1000, ixgb: Remove pointless wrappers\n [PATCH] Remove powerpc specific parts of 3c509 driver\n [PATCH] s2io: Switch to pci_get_device\n [PATCH] gt96100: move to pci_get_device API\n [PATCH] ehea: bugfix for register access functions\n [PATCH] e1000 disable device on PCI error\n drivers/net/phy/fixed: #if 0 some incomplete code\n drivers/net: const-ify ethtool_ops declarations\n [PATCH] ethtool: allow const ethtool_ops\n [PATCH] sky2: big endian\n [PATCH] sky2: fiber support\n [PATCH] sky2: tx pause bug fix\n drivers/net: Trim trailing whitespace\n [PATCH] ehea: IBM eHEA Ethernet Device Driver\n ...\n\nManually resolved conflicts in drivers/net/ixgb/ixgb_main.c and\ndrivers/net/sky2.c related to CHECKSUM_HW/CHECKSUM_PARTIAL changes by\ncommit 84fa7933a33f806bbbaae6775e87459b1ec584c0 that just happened to be\nnext to unrelated changes in this update.\n" }, { "commit": "131852176c1f5b4350b4af811d1836db387d0c61", "tree": "1092efea1219dd4ea2c146b68563c72568183e78", "parents": [ "8abfedd889e46ad4977dfcdab737edf5c5803c62" ], "author": { "name": "Henrik Kretzschmar", "email": "henne@nachtwindheim.de", "time": "Tue Aug 22 00:28:33 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Fri Sep 22 14:55:20 2006 -0700" }, "message": "[TG3]: Convert the pci_device_id table to PCI_DEVICE()\n\nConvert the pci_device_ids to PCI_DEVICE() macro. Saves 1.5k in the\nsourcefile.\n\nSigned-off-by: Henrik Kretzschmar \u003chenne@nachtwindheim.de\u003e\nAcked-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "50da859d4e566fba90ebda87b843970d902c903e", "tree": "43d7e49e429afe62b61920ba4d8d4278bcf6ced1", "parents": [ "90d41122f79c8c3687d965dde4c6d30a6e0cac4c" ], "author": { "name": "Andreas Mohr", "email": "andi@lisas.de", "time": "Mon Aug 14 23:54:30 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Fri Sep 22 14:54:39 2006 -0700" }, "message": "[TG3]: Constify firmware structs\n\nConstify largish areas of firmware data in Tigon3 ethernet driver.\n\nnon-const:\n\nlsmod:\ntg3 101404 0\n\nobjdump -x:\n.rodata 000003e8\n.data 00004a0c\n\nls -l:\n-rw-r--r-- 1 root root 114404 2006-08-19 21:36 drivers/net/tg3.ko\n\nconst:\n\nlsmod:\ntg3 101404 0\n\nobjdump -x:\n.rodata 000042c8\n.data 00000b4c\n\nls -l:\n-rw-r--r-- 1 root root 114532 2006-08-19 21:06 drivers/net/tg3.ko\n\nSigned-off-by: Andreas Mohr \u003candi@lisas.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "84fa7933a33f806bbbaae6775e87459b1ec584c0", "tree": "5be404225d90f640997b12f631e9b496b3fd0d61", "parents": [ "8584d6df39db5601965f9bc5e3bf2fea833ad7bb" ], "author": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Tue Aug 29 16:44:56 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Fri Sep 22 14:53:53 2006 -0700" }, "message": "[NET]: Replace CHECKSUM_HW by CHECKSUM_PARTIAL/CHECKSUM_COMPLETE\n\nReplace CHECKSUM_HW by CHECKSUM_PARTIAL (for outgoing packets, whose\nchecksum still needs to be completed) and CHECKSUM_COMPLETE (for\nincoming packets, device supplied full checksum).\n\nPatch originally from Herbert Xu, updated by myself for 2.6.18-rc3.\n\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "7282d491ecaee9883233a0e27283c4c79486279a", "tree": "172ffa70716f5493db57976ceef7652120b3332f", "parents": [ "76fd85937097a0c2ec8ab23bf21dc10992d1c398" ], "author": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Wed Sep 13 14:30:00 2006 -0400" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Wed Sep 13 14:30:00 2006 -0400" }, "message": "drivers/net: const-ify ethtool_ops declarations\n\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "6aa20a2235535605db6d6d2bd850298b2fe7f31e", "tree": "df0b855043407b831d57f2f2c271f8aab48444f4", "parents": [ "7a291083225af6e22ffaa46b3d91cfc1a1ccaab4" ], "author": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Wed Sep 13 13:24:59 2006 -0400" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Wed Sep 13 13:24:59 2006 -0400" }, "message": "drivers/net: Trim trailing whitespace\n\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "299176206b266f204be859adf9e66efd06628ab2", "tree": "e25d9ee1c43940e00e70124a18d869a75de543ab", "parents": [ "5243a37b7991c85e3ea3afb6e3e13eea7ec2927d" ], "author": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Aug 19 17:48:59 2006 -0400" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Aug 19 17:48:59 2006 -0400" }, "message": "drivers/net: Remove deprecated use of pci_module_init()\n\nFrom: Michal Piotrowski \u003cmichal.k.k.piotrowski@gmail.com\u003e\n\nSigned-off-by: Michal Piotrowski \u003cmichal.k.k.piotrowski@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "1b2a720506ccf7c30baaeda5d990c29b31e21726", "tree": "5990f56e364077c83563566ed64beae95b855a9f", "parents": [ "bd37a088596ccdb2b2dd3299e25e333bca7a9a34" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Mon Aug 07 21:46:02 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Aug 07 21:46:02 2006 -0700" }, "message": "[TG3]: Fix tx race condition\n\nFix a subtle race condition between tg3_start_xmit() and tg3_tx()\ndiscovered by Herbert Xu \u003cherbert@gondor.apana.org.au\u003e:\n\nCPU0\t\t\t\t\tCPU1\ntg3_start_xmit()\n\tif (tx_ring_full) {\n\t\ttx_lock\n\t\t\t\t\ttg3_tx()\n\t\t\t\t\t\tif (!netif_queue_stopped)\n\t\tnetif_stop_queue()\n\t\tif (!tx_ring_full)\n\t\t\t\t\t\tupdate_tx_ring \n\t\t\tnetif_wake_queue()\n\t\ttx_unlock\n\t}\n\nEven though tx_ring is updated before the if statement in tg3_tx() in\nprogram order, it can be re-ordered by the CPU as shown above. This\nscenario can cause the tx queue to be stopped forever if tg3_tx() has\njust freed up the entire tx_ring. The possibility of this happening\nshould be very rare though.\n\nThe following changes are made:\n\n1. Add memory barrier to fix the above race condition.\n\n2. Eliminate the private tx_lock altogether and rely solely on\nnetif_tx_lock. This eliminates one spinlock in tg3_start_xmit()\nwhen the ring is full.\n\n3. Because of 2, use netif_tx_lock in tg3_tx() before calling\nnetif_wake_queue().\n\n4. Change TX_BUFFS_AVAIL to an inline function with a memory barrier.\nHerbert and David suggested using the memory barrier instead of\nvolatile.\n\n5. Check for the full wake queue condition before getting\nnetif_tx_lock in tg3_tx(). This reduces the number of unnecessary\nspinlocks when the tx ring is full in a steady-state condition.\n\n6. Update version to 3.65.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nAcked-by: Herbert Xu \u003cherbert@gondor.apana.org.au\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "d14cc9a342a8004b0ecfe66f1f12120962b61d8c", "tree": "2789722fbdd2118b51f09d47373b83103320417e", "parents": [ "7b2e497a06c0e93719fda88820e057b635e8fae2" ], "author": { "name": "Christoph Hellwig", "email": "hch@lst.de", "time": "Mon Aug 07 16:11:48 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Aug 07 16:11:48 2006 -0700" }, "message": "[TG3]: skb-\u003edev assignment is done by netdev_alloc_skb\n\nAll caller of netdev_alloc_skb need to assign skb-\u003edev shortly\nafterwards. Move it into common code.\n\nSigned-off-by: Christoph Hellwig \u003chch@lst.de\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "a20e9c6291f27cac4a9ab450d124794c012f87d4", "tree": "5f91808211a2e8213dc71446201224a4897bb433", "parents": [ "8af2745645243b5e5b031504a643bf2158571dc7" ], "author": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Mon Jul 31 22:38:16 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Aug 02 13:38:26 2006 -0700" }, "message": "[TG3]: Convert to netdev_alloc_skb\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "b6e77a5346d8a739227ed73c2269966a4fd652b4", "tree": "f28fe6f5dd1d14d281be3cf31e6a093b881406b9", "parents": [ "32d8c5724b7b05c7d8f7386c49432104cc222e32" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Tue Jul 25 16:39:12 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jul 25 16:39:12 2006 -0700" }, "message": "[TG3]: Update version and reldate\n\nUpdate version to 3.63.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "32d8c5724b7b05c7d8f7386c49432104cc222e32", "tree": "6aead952a08a295135c5faf7da5ff8523a6e4616", "parents": [ "b9ec6c1b917e2e43a058a78198d54aeca3d71c6f" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Tue Jul 25 16:38:29 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jul 25 16:38:29 2006 -0700" }, "message": "[TG3]: Handle tg3_init_rings() failures\n\nHandle dev_alloc_skb() failures when initializing the RX rings.\nWithout proper handling, the driver will crash when using a partial\nring.\n\nThanks to Stephane Doyon \u003csdoyon@max-t.com\u003e for reporting the bug and\nproviding the initial patch.\n\nHowie Xu \u003chowie@vmware.com\u003e also reported the same issue.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "b9ec6c1b917e2e43a058a78198d54aeca3d71c6f", "tree": "8dee4fc5d024525b8b32c99c123ef58eb64b4686", "parents": [ "d569f1d72f068992d07ab17f7ff9aea7f0d97cdb" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Tue Jul 25 16:37:27 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jul 25 16:37:27 2006 -0700" }, "message": "[TG3]: Add tg3_restart_hw()\n\nAdd tg3_restart_hw() to handle failures when re-initializing the\ndevice.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c165b0040502ef0d2b5751eef3cd96ea8210ae4c", "tree": "e552663a164e010f87cfca0b2b398e8cc2e1b560", "parents": [ "5a8da02ba59a9f978e2af4c5da9a029ea5f5ee3b" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Sat Jul 08 13:28:53 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Jul 08 13:28:53 2006 -0700" }, "message": "[TG3]: add amd8131 to \"write reorder\" chipsets\n\nAdd the AMD 8131 bridge to the list of chipsets that reorder writes.\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nAcked-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "b0026624f1aa3e38a887cb483de61f104d600b97", "tree": "16ab702d08c7235456f3d2f926932307aa90b0ad", "parents": [ "6703931c546e6dec0431776fa616d5accd3e7162" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Mon Jul 03 19:42:14 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Jul 03 19:42:14 2006 -0700" }, "message": "[TG3]: Add ipv6 TSO feature\n\nEnable ipv6 TSO feature on chips that support it.\n\nUpdate version to 3.61.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "1fb9df5d3069064c037c81c0ab8bf783ffa5e373", "tree": "23028cfd5b98a72fcf12256fac4bc0c68181f2c4", "parents": [ "dace145374b8e39aeb920304c358ab5e220341ab" ], "author": { "name": "Thomas Gleixner", "email": "tglx@linutronix.de", "time": "Sat Jul 01 19:29:39 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Sun Jul 02 13:58:51 2006 -0700" }, "message": "[PATCH] irq-flags: drivers/net: Use the new IRQF_ constants\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nCc: Ingo Molnar \u003cmingo@elte.hu\u003e\nCc: \"David S. Miller\" \u003cdavem@davemloft.net\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "e37a72de84d27ee8bc0e7dbb5c2f1774ed306dbb", "tree": "f9da35cbd79b52a5bd08d4a0f960bde6af741da0", "parents": [ "93fdf10d4c28edaa1b9f80e7f9c3002359186d00", "f83ef8c0b58dac17211a4c0b6df0e2b1bd6637b1" ], "author": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Fri Jun 30 15:40:17 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Fri Jun 30 15:40:17 2006 -0700" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\n* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:\n [IPV6]: Added GSO support for TCPv6\n [NET]: Generalise TSO-specific bits from skb_setup_caps\n [IPV6]: Added GSO support for TCPv6\n [IPV6]: Remove redundant length check on input\n [NETFILTER]: SCTP conntrack: fix crash triggered by packet without chunks\n [TG3]: Update version and reldate\n [TG3]: Add TSO workaround using GSO\n [TG3]: Turn on hw fix for ASF problems\n [TG3]: Add rx BD workaround\n [TG3]: Add tg3_netif_stop() in vlan functions\n [TCP]: Reset gso_segs if packet is dodgy\n" }, { "commit": "2c6059bca8cf5e7f722d909f2e5edda0491ac604", "tree": "8e09bcdd1ee366b4167fe601e4919412863b2bfc", "parents": [ "52c0fd834ea0e7c6ef8616ce0a1f85bac4233ed7" ], "author": { "name": "Michael Chan", "email": "mchan@broadcom.com", "time": "Thu Jun 29 20:16:28 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Fri Jun 30 14:11:59 2006 -0700" }, "message": "[TG3]: Update version and reldate\n\nUpdate version to 3.61.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" } ], "next": "52c0fd834ea0e7c6ef8616ce0a1f85bac4233ed7" }