)]}' { "log": [ { "commit": "8862dc5f25153a3c565a097220ed3de14ed72dfd", "tree": "fa2afcc9c6ae9bf6388aaab65ddc8dca41f089cf", "parents": [ "a4e7b730f1c8c9179def7033a024183c58cf2538" ], "author": { "name": "Holger Schurig", "email": "hs4233@mail.mn-solutions.de", "time": "Fri Sep 11 10:13:55 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 14 14:36:04 2009 -0400" }, "message": "cfg80211: minimal error handling for wext-compat freq scanning\n\nSigned-off-by: Holger Schurig \u003chs4233@mail.mn-solutions.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a4e7b730f1c8c9179def7033a024183c58cf2538", "tree": "b81bee6f9c4a69b5b9c81a2c03fe8284a6662daf", "parents": [ "d37b7da39dbac8197e41a5f9c8162730f6b36d8b" ], "author": { "name": "Holger Schurig", "email": "h.schurig@mn-solutions.de", "time": "Fri Sep 11 10:13:53 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 14 14:36:04 2009 -0400" }, "message": "cfg80211: use cfg80211_wext_freq() for freq conversion\n\nWEXT\u0027s \"struct iw_freq\" can also be used to handle a channel. This patch now\nuses cfg80211_wext_freq() instead of hand-converting the frequency. That\nallows user-space to specify channels as well, like with SIOCSIWFREQ.\n\nSigned-off-by: Holger Schurig \u003chs4233@mail.mn-solutions.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d37b7da39dbac8197e41a5f9c8162730f6b36d8b", "tree": "34f9dc2444136bf56796522b2e8604e125faf3a8", "parents": [ "32f6afd82c1c4e9415db9f8d18e3fd6fc65cfd46" ], "author": { "name": "Sujith", "email": "Sujith.Manoharan@atheros.com", "time": "Fri Sep 11 08:30:03 2009 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 14 14:36:03 2009 -0400" }, "message": "ath9k: Fix bug in ANI channel handling\n\nWhen processing MIB interrupts, OFDM and CCK error\nhandling routines for low RSSI values have to be invoked\nonly when the channel mode is 11G/11B. Since HT channels\nwill also fall under the bands 2Ghz/5Ghz, check appropriately.\n\nSigned-off-by: Sujith \u003cSujith.Manoharan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "32f6afd82c1c4e9415db9f8d18e3fd6fc65cfd46", "tree": "531816aa7c7ab47eae70a7f58d0c61806e68af7b", "parents": [ "e484c16f6212f7f06407382efa4d3ad214b6c589" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Thu Sep 10 20:31:46 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 14 14:36:03 2009 -0400" }, "message": "b43: Force-wake queues on init\n\nForce wake the mac80211 queues on init.\nUnder rare circumstances they may be stopped, if a DMA error or\nsomething else causes a device reset while a queue was stopped.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e484c16f6212f7f06407382efa4d3ad214b6c589", "tree": "71daa641bd545bdff1198336f2fae6985dbe081a", "parents": [ "13af7a6ea502fcdd4c0e3d7de6e332b102309491" ], "author": { "name": "Martin Decky", "email": "martin@decky.cz", "time": "Thu Sep 10 03:44:47 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 14 14:36:03 2009 -0400" }, "message": "hostap: Revert a toxic part of the conversion to net_device_ops\n\nAs the hostap driver was converted to use net_device_ops, a mistake was\nmade in hostap_main.c (commit 5ae4efbcd2611562a8b93596be034e63495706a5).\nOriginally, the tx_queue_len was set to 0 for every other interface than\nHOSTAP_INTERFACE_MASTER, but the new fragment of code sets tx_queue_len to\n0 only for HOSTAP_INTERFACE_MASTER. The opposite of the previous\nbehavior makes the driver to drop all packets in AP mode.\n\nChange the way 0 is assigned to tx_queue_len according to the original\nlogic.\n\nSigned-off-by: Martin Decky \u003cmartin@decky.cz\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "13af7a6ea502fcdd4c0e3d7de6e332b102309491", "tree": "cea083e14ac3469db1279a584d20a876606d315a", "parents": [ "74c520da5414d15b0ab2839d67efab2e7227be75" ], "author": { "name": "Dhananjay Phadke", "email": "dhananjay@netxen.com", "time": "Fri Sep 11 11:28:15 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 11 16:58:51 2009 -0700" }, "message": "netxen: update copyright\n\no Add QLogic copyright, add linux-driver@qlogic.com to\n MAINTAINERS.\no Delete old contact information.\n\nSigned-off-by: Dhananjay Phadke \u003cdhananjay@netxen.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "74c520da5414d15b0ab2839d67efab2e7227be75", "tree": "d079968ab0f36d4cf7521763ef64d165976537e7", "parents": [ "ec5c50cb93c446a4686863df74e4b7a547628115" ], "author": { "name": "Amit Kumar Salecha", "email": "amit@qlogic.com", "time": "Fri Sep 11 11:28:14 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 11 16:58:48 2009 -0700" }, "message": "netxen: fix tx timeout recovery\n\nRedesign tx timeout handling in line with new firmware\nreset design that co-ordinates with other PCI function\ndrivers.\n\no For NX3031, first try to reset PCI function\u0027s own\n context before requesting firmware reset.\n\no For NX2031, since firmware heartbit is not supported\n directly request firmware reset.\n\nSigned-off-by: Amit Kumar Salecha \u003camit@netxen.com\u003e\nSigned-off-by: Dhananjay Phadke \u003cdhananjay@netxen.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "ec5c50cb93c446a4686863df74e4b7a547628115", "tree": "276e2c1d4c0e806c429322e75f10f985da441ee4", "parents": [ "ea6828b8aa3a8ebae8d7740f32f212ba1d2f0742" ], "author": { "name": "Dhananjay Phadke", "email": "dhananjay@netxen.com", "time": "Fri Sep 11 11:28:13 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 11 16:58:45 2009 -0700" }, "message": "netxen: fix file firmware leak\n\nRelease file firmware when no firmware reset is required.\n\nSigned-off-by: Dhananjay Phadke \u003cdhananjay@netxen.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "ea6828b8aa3a8ebae8d7740f32f212ba1d2f0742", "tree": "6a783fc6ceb9de3edf2577af1ed5d6acc0deca74", "parents": [ "f78c0850d2ebe7a44a4b0263480a2f1a36a92218" ], "author": { "name": "Dhananjay Phadke", "email": "dhananjay@netxen.com", "time": "Fri Sep 11 11:28:12 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 11 16:58:42 2009 -0700" }, "message": "netxen: improve pci memory access\n\no Access on card memory through memory controller (agent)\n rather than moving small pci window around. Clean up the\n code for moving windows around.\n\no Restrict memory accesss to 64 bit, currently only firmware\n download uses this.\n\nSigned-off-by: Dhananjay Phadke \u003cdhananjay@netxen.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "f78c0850d2ebe7a44a4b0263480a2f1a36a92218", "tree": "0965632234e9a3a306ad2c8cde5f0066bb6acf9f", "parents": [ "5ea1c50662d447de344812054175d7151783ea25" ], "author": { "name": "Amit Kumar Salecha", "email": "amit@qlogic.com", "time": "Fri Sep 11 11:28:11 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 11 16:58:38 2009 -0700" }, "message": "netxen: change firmware write size\n\nUse 8 byte strides for firmware download into card\nmemory since oncard memory controller needs 8 byte\n(64 bit) accesses. This avoids unnecessary rmw cycles.\n\nSigned-off-by: Amit Kumar Salecha \u003camit@netxen.com\u003e\nSigned-off-by: Dhananjay Phadke \u003cdhananjay@netxen.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5ea1c50662d447de344812054175d7151783ea25", "tree": "0e8808b8d747dd237316ce050fe3fceb7bb32cd3", "parents": [ "9feae56c0de65fdd8b1f64f376bb6578417d2b79" ], "author": { "name": "Matt Carlson", "email": "mcarlson@broadcom.com", "time": "Fri Sep 11 16:50:16 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 11 16:50:16 2009 -0700" }, "message": "tg3: Fix return ring size breakage\n\nCommit f6eb9b1fc1411d22c073f5264e5630a541d0f7df, \"tg3: Add 5717 asic\nrev\" changed how the rx return ring size operations are done. It\neffectively inverts the sense of the previous test, but it failed to\nalso invert the resulting sizes. This patch corrects that error.\n\nSigned-off-by: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "9feae56c0de65fdd8b1f64f376bb6578417d2b79", "tree": "84d3338d3813efffcee251b43af1ab234c9fcc18", "parents": [ "02571f89871e009b66fb5f8d5ae222e90e9f357c" ], "author": { "name": "Randy Dunlap", "email": "randy.dunlap@oracle.com", "time": "Fri Sep 11 12:41:04 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 11 15:51:39 2009 -0700" }, "message": "netxen: build fix for INET\u003dn\n\nWhen CONFIG_INET is disabled, netxen has a build failure:\n\nnetxen_nic_main.c:(.text+0x118fd1): undefined reference to `netxen_config_indev_addr\u0027\n\nso make that function just an empty stub when CONFIG_INET\u003dn.\n(not \"inline\" since that conflicts with other declarations of it)\n\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nAcked-by: Dhananjay Phadke \u003cdhananjay@netxen.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "02571f89871e009b66fb5f8d5ae222e90e9f357c", "tree": "b928bc79e282f656ebe58b6ebd3b08fe3e505f7e", "parents": [ "f5bb1c558405aaac41b08b2ea71137db9db46e72" ], "author": { "name": "Rémi Denis-Courmont", "email": "remi.denis-courmont@nokia.com", "time": "Wed Sep 09 00:00:06 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 11 12:55:10 2009 -0700" }, "message": "cdc-phonet: autoconfigure Phonet address\n\nSigned-off-by: Rémi Denis-Courmont \u003cremi.denis-courmont@nokia.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "f5bb1c558405aaac41b08b2ea71137db9db46e72", "tree": "deeabf046d4d18675bf85360a3059eb4f29f8d62", "parents": [ "998ec759ef2fc9c60319815c72b2b699ab939733" ], "author": { "name": "Rémi Denis-Courmont", "email": "remi.denis-courmont@nokia.com", "time": "Wed Sep 09 00:00:05 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 11 12:55:06 2009 -0700" }, "message": "Phonet: back-end for autoconfigured addresses\n\nIn some cases, the network device driver knows what layer-3 address the\ndevice should have. This adds support for the Phonet stack to\nautomatically request from the driver and add that address to the\nnetwork device.\n\nSigned-off-by: Rémi Denis-Courmont \u003cremi.denis-courmont@nokia.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "998ec759ef2fc9c60319815c72b2b699ab939733", "tree": "7e6fe0dccd9578e24c47e82cc8a497a681c58752", "parents": [ "cc411d0bae9c19ec85a150aeab4b08335f5751d1" ], "author": { "name": "Rémi Denis-Courmont", "email": "remi.denis-courmont@nokia.com", "time": "Tue Sep 08 23:59:51 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 11 12:55:04 2009 -0700" }, "message": "Phonet: fix netlink address dump error handling\n\nSigned-off-by: Rémi Denis-Courmont \u003cremi.denis-courmont@nokia.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "cc411d0bae9c19ec85a150aeab4b08335f5751d1", "tree": "c42430cdb955c158d69fd9fef053c01130f8eb07", "parents": [ "384912ed194e43c03ad1cdaa09b0b1e488c34d46" ], "author": { "name": "Brian Haley", "email": "brian.haley@hp.com", "time": "Wed Sep 09 14:41:32 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 11 12:54:58 2009 -0700" }, "message": "ipv6: Add IFA_F_DADFAILED flag\n\nAdd IFA_F_DADFAILED flag to denote an IPv6 address that has\nfailed Duplicate Address Detection, that way tools like\n/sbin/ip can be more informative.\n\n3: eth0: \u003cBROADCAST,MULTICAST,UP,LOWER_UP\u003e mtu 1500 qlen 1000\n inet6 2001:db8::1/64 scope global tentative dadfailed\n valid_lft forever preferred_lft forever\n\nSigned-off-by: Brian Haley \u003cbrian.haley@hp.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "384912ed194e43c03ad1cdaa09b0b1e488c34d46", "tree": "bdaae15252819543cff0900941238d2b99bb2300", "parents": [ "f510c35de0e63e1066db83d2fdce99e6dbde0c80" ], "author": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Mon Aug 31 21:08:19 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 11 12:54:55 2009 -0700" }, "message": "net: Add DEVTYPE support for Ethernet based devices\n\nThe Ethernet framing is used for a lot of devices these days. Most\nprominent are WiFi and WiMAX based devices. However for userspace\napplication it is important to classify these devices correctly and\nnot only see them as Ethernet devices. The daemons like HAL, DeviceKit\nor even NetworkManager with udev support tries to do the classification\nin userspace with a lot trickery and extra system calls. This is not\ngood and actually reaches its limitations. Especially since the kernel\ndoes know the type of the Ethernet device it is pretty stupid.\n\nTo solve this problem the underlying device type needs to be set and\nthen the value will be exported as DEVTYPE via uevents and available\nwithin udev.\n\n # cat /sys/class/net/wlan0/uevent\n DEVTYPE\u003dwlan\n INTERFACE\u003dwlan0\n IFINDEX\u003d5\n\nThis is similar to subsystems like USB and SCSI that distinguish\nbetween hosts, devices, disks, partitions etc.\n\nThe new SET_NETDEV_DEVTYPE() is a convenience helper to set the actual\ndevice type. All device types are free form, but for convenience the\nsame strings as used with RFKILL are choosen.\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "f510c35de0e63e1066db83d2fdce99e6dbde0c80", "tree": "6a20dee2eb58fb0bb17fe0cd74bcffe0fbe2a549", "parents": [ "864fdf884e82bacbe8ca5e93bd43393a61d2e2b4" ], "author": { "name": "Mikael Pettersson", "email": "mikpe@it.uu.se", "time": "Sun Sep 06 23:59:16 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 11 12:54:49 2009 -0700" }, "message": "mv643xx_eth.c: remove unused txq_set_wrr()\n\nThe txq_set_wrr() function in drivers/net/mv643xx_eth.c is\nunused, not even referenced under #if 0 or something like that,\nwhich results in a compile-time warning:\n\ndrivers/net/mv643xx_eth.c:1070: warning: \u0027txq_set_wrr\u0027 defined but not used\n\nFix: remove it.\n\nSigned-off-by: Mikael Pettersson \u003cmikpe@it.uu.se\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "864fdf884e82bacbe8ca5e93bd43393a61d2e2b4", "tree": "53a45c507d77eb8cc33cd9226ebeac947119ede3", "parents": [ "7de8ee787e8e10adaf5635bffab4ee19a7558afb" ], "author": { "name": "Anton Vorontsov", "email": "avorontsov@ru.mvista.com", "time": "Thu Sep 10 11:48:12 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 11 12:54:45 2009 -0700" }, "message": "ucc_geth: Fix hangs after switching from full to half duplex\n\nMPC8360 QE UCC ethernet controllers hang when changing link duplex\nunder a load (a bit of NFS activity is enough).\n\n PHY: mdio@e0102120:00 - Link is Up - 1000/Full\n sh-3.00# ethtool -s eth0 speed 100 duplex half autoneg off\n PHY: mdio@e0102120:00 - Link is Down\n PHY: mdio@e0102120:00 - Link is Up - 100/Half\n NETDEV WATCHDOG: eth0 (ucc_geth): transmit queue 0 timed out\n ------------[ cut here ]------------\n Badness at c01fcbd0 [verbose debug info unavailable]\n NIP: c01fcbd0 LR: c01fcbd0 CTR: c0194e44\n ...\n\nThe cure is to disable the controller before changing speed/duplex\nand enable it afterwards.\n\nThough, disabling the controller might take quite a while, so we\nbetter not grab any spinlocks in adjust_link(). Instead, we quiesce\nthe driver\u0027s activity, and only then disable the controller.\n\nSigned-off-by: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "7de8ee787e8e10adaf5635bffab4ee19a7558afb", "tree": "2675ab13458dbcc692327456adbb2e9176db96e0", "parents": [ "8ff44985c761ad6697a3c97e7b14cf5362ff3801" ], "author": { "name": "Anton Vorontsov", "email": "avorontsov@ru.mvista.com", "time": "Wed Sep 09 16:01:40 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 11 12:54:42 2009 -0700" }, "message": "ucc_geth: Rearrange some code to avoid forward declarations\n\nWe\u0027ll need ugeth_disable() and ugeth_enable() calls earlier in the\nfile, so rearrange some code to avoid forward declarations.\n\nThe patch doesn\u0027t contain any functional changes.\n\nSigned-off-by: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nAcked-by: Timur Tabi \u003ctimur@freescale.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "8ff44985c761ad6697a3c97e7b14cf5362ff3801", "tree": "3f9903a9573ea74938c8ff66be449e1d0a965dba", "parents": [ "a4b11649618ef5366ee553f4083449d6bee5d8ec" ], "author": { "name": "Anton Vorontsov", "email": "avorontsov@ru.mvista.com", "time": "Wed Sep 09 16:01:30 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 11 12:54:38 2009 -0700" }, "message": "phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs\n\nAccording to specs, when auto-negotiation is disabled, Marvell PHYs need\na software reset after changing speed/duplex forcing bits. Otherwise,\nthe modified bits have no effect.\n\nSigned-off-by: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "a4b11649618ef5366ee553f4083449d6bee5d8ec", "tree": "50d7ffad6a9d1ab544e8ef6b7d9e0ec93ba6bb17", "parents": [ "966a5d1b85c45f1b55abbc1b595e0b5ca14b87db" ], "author": { "name": "Julia Lawall", "email": "julia@diku.dk", "time": "Fri Sep 11 06:22:09 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 11 12:54:34 2009 -0700" }, "message": "drivers/net/phy: introduce missing kfree\n\nError handling code following a kzalloc should free the allocated data.\n\nThe semantic match that finds the problem is as follows:\n(http://www.emn.fr/x-info/coccinelle/)\n\n// \u003csmpl\u003e\n@r exists@\nlocal idexpression x;\nstatement S;\nexpression E;\nidentifier f,f1,l;\nposition p1,p2;\nexpression *ptr !\u003d NULL;\n@@\n\nx@p1 \u003d \\(kmalloc\\|kzalloc\\|kcalloc\\)(...);\n...\nif (x \u003d\u003d NULL) S\n\u003c... when !\u003d x\n when !\u003d if (...) { \u003c+...x...+\u003e }\n(\nx-\u003ef1 \u003d E\n|\n (x-\u003ef1 \u003d\u003d NULL || ...)\n|\n f(...,x-\u003ef1,...)\n)\n...\u003e\n(\n return \\(0\\|\u003c+...x...+\u003e\\|ptr\\);\n|\n return@p2 ...;\n)\n\n@script:python@\np1 \u003c\u003c r.p1;\np2 \u003c\u003c r.p2;\n@@\n\nprint \"* file: %s kmalloc %s return %s\" % (p1[0].file,p1[0].line,p2[0].line)\n// \u003c/smpl\u003e\n\nSigned-off-by: Julia Lawall \u003cjulia@diku.dk\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "966a5d1b85c45f1b55abbc1b595e0b5ca14b87db", "tree": "7360488b3447653fd616ea0688a7614b25b500d7", "parents": [ "4fb019a01a7f67342d4a88d26c0817afe392c669" ], "author": { "name": "Julia Lawall", "email": "julia@diku.dk", "time": "Fri Sep 11 06:21:51 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 11 12:54:30 2009 -0700" }, "message": "drivers/net/wan: introduce missing kfree\n\nError handling code following a kmalloc should free the allocated data.\n\nThe semantic match that finds the problem is as follows:\n(http://www.emn.fr/x-info/coccinelle/)\n\n// \u003csmpl\u003e\n@r exists@\nlocal idexpression x;\nstatement S;\nexpression E;\nidentifier f,f1,l;\nposition p1,p2;\nexpression *ptr !\u003d NULL;\n@@\n\nx@p1 \u003d \\(kmalloc\\|kzalloc\\|kcalloc\\)(...);\n...\nif (x \u003d\u003d NULL) S\n\u003c... when !\u003d x\n when !\u003d if (...) { \u003c+...x...+\u003e }\n(\nx-\u003ef1 \u003d E\n|\n (x-\u003ef1 \u003d\u003d NULL || ...)\n|\n f(...,x-\u003ef1,...)\n)\n...\u003e\n(\n return \\(0\\|\u003c+...x...+\u003e\\|ptr\\);\n|\n return@p2 ...;\n)\n\n@script:python@\np1 \u003c\u003c r.p1;\np2 \u003c\u003c r.p2;\n@@\n\nprint \"* file: %s kmalloc %s return %s\" % (p1[0].file,p1[0].line,p2[0].line)\n// \u003c/smpl\u003e\n\nSigned-off-by: Julia Lawall \u003cjulia@diku.dk\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "4fb019a01a7f67342d4a88d26c0817afe392c669", "tree": "6fe31bb55ee8efff2a7774c214e90ba732695386", "parents": [ "ffcfb8db540ff879c2a85bf7e404954281443414" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Fri Sep 11 11:50:08 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 11 12:54:26 2009 -0700" }, "message": "net: force bridge module(s) to be GPL\n\nThe only valid usage for the bridge frame hooks are by a\nGPL components (such as the bridge module).\nThe kernel should not leave a crack in the door for proprietary\nnetworking stacks to slip in.\n\nSigned-off-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "ffcfb8db540ff879c2a85bf7e404954281443414", "tree": "9b0014cd056c4283e6df924a5fe28ab54542c1d3", "parents": [ "8ba69ba6a324b13e1190fc31e41954d190fd4f1d" ], "author": { "name": "Arnaldo Carvalho de Melo", "email": "acme@redhat.com", "time": "Fri Sep 11 11:35:22 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 11 12:54:23 2009 -0700" }, "message": "Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loaded\n\nAnd also do a better job of returning proper NET_{RX,XMIT}_ values.\n\nBased on a patch and suggestions by Mark Smith.\n\nThis fixes CVE-2009-2903\n\nReported-by: Mark Smith \u003clk-netdev@lk-netdev.nosense.org\u003e\nSigned-off-by: Arnaldo Carvalho de Melo \u003cacme@redhat.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "8ba69ba6a324b13e1190fc31e41954d190fd4f1d", "tree": "3794f633c57ca8257242abccc891c8be7d58cdf0", "parents": [ "9a0da0d19c573e01aded6ac17747d2efc5b1115f" ], "author": { "name": "Miklos Szeredi", "email": "mszeredi@suse.cz", "time": "Fri Sep 11 11:31:45 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 11 11:31:45 2009 -0700" }, "message": "net: unix: fix sending fds in multiple buffers\n\nKalle Olavi Niemitalo reported that:\n\n \"..., when one process calls sendmsg once to send 43804 bytes of\n data and one file descriptor, and another process then calls recvmsg\n three times to receive the 16032+16032+11740 bytes, each of those\n recvmsg calls returns the file descriptor in the ancillary data. I\n confirmed this with strace. The behaviour differs from Linux\n 2.6.26, where reportedly only one of those recvmsg calls (I think\n the first one) returned the file descriptor.\"\n\nThis bug was introduced by a patch from me titled \"net: unix: fix inflight\ncounting bug in garbage collector\", commit 6209344f5.\n\nAnd the reason is, quoting Kalle:\n\n \"Before your patch, unix_attach_fds() would set scm-\u003efp \u003d NULL, so\n that if the loop in unix_stream_sendmsg() ran multiple iterations,\n it could not call unix_attach_fds() again. But now,\n unix_attach_fds() leaves scm-\u003efp unchanged, and I think this causes\n it to be called multiple times and duplicate the same file\n descriptors to each struct sk_buff.\"\n\nFix this by introducing a flag that is cleared at the start and set\nwhen the fds attached to the first buffer. The resulting code should\nwork equivalently to the one on 2.6.26.\n\nReported-by: Kalle Olavi Niemitalo \u003ckon@iki.fi\u003e\nSigned-off-by: Miklos Szeredi \u003cmszeredi@suse.cz\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "9a0da0d19c573e01aded6ac17747d2efc5b1115f", "tree": "76294327bae4b3e45b16c690bda4b24951f237cf", "parents": [ "ec282e9225be924479d4880b51f13524795bd8d3", "8a56df0ae1690f8f42a3c6c4532f4b06f93febea" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Sep 10 18:17:09 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Sep 10 18:17:09 2009 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6\n" }, { "commit": "ec282e9225be924479d4880b51f13524795bd8d3", "tree": "b9f922e45a2d8fab4d095752d411880ebabc965a", "parents": [ "07fcb044b6ea53b67d00e198f9073e0538df7b75" ], "author": { "name": "Tobias Klauser", "email": "tklauser@distanz.ch", "time": "Wed Sep 09 01:07:43 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Sep 09 18:54:49 2009 -0700" }, "message": "dm9000: Use resource_size instead of private macro\n\nThe macro res_size in drivers/net/dm9000.c is a copy of resource_size in\nlinux/ioport.h. Remove the function and use resource_size instead.\n\nSigned-off-by: Tobias Klauser \u003ctklauser@distanz.ch\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "07fcb044b6ea53b67d00e198f9073e0538df7b75", "tree": "8783ca59ac09e9eb2b2893a7addeba7c87b44008", "parents": [ "58f25468b5636c390ad2a58356b127c0055884b4" ], "author": { "name": "Tobias Klauser", "email": "tklauser@distanz.ch", "time": "Wed Sep 09 01:07:44 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Sep 09 18:54:47 2009 -0700" }, "message": "dm9000: Remove unnecessary memset of netdev private data\n\nThe memory for the private data is allocated using kzalloc in\nalloc_etherdev (or alloc_netdev_mq respectively) so there is no need to\nset it to 0 again.\n\nSigned-off-by: Tobias Klauser \u003ctklauser@distanz.ch\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "58f25468b5636c390ad2a58356b127c0055884b4", "tree": "5da1946a20912eb292760865227e2aa536f610fd", "parents": [ "3db7675506ef7460bf6220545bfc69abb7dbceab" ], "author": { "name": "Amit Kumar Salecha", "email": "amit@netxen.com", "time": "Wed Sep 09 18:12:59 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Sep 09 18:12:59 2009 -0700" }, "message": "netxen: fix tx descriptor structure\n\nFix the offset of vlan_TCI field in cmd_desc_type0.\n\nSigned-off-by: Amit Kumar Salecha \u003camit@qlogic.com\u003e\nSigned-off-by: Dhananjay Phadke \u003cdhananjay@netxen.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "3db7675506ef7460bf6220545bfc69abb7dbceab", "tree": "89e9c6aa2772af4ab4ed2f88be03a25b86119bba", "parents": [ "23bcf634c8bc0d84607a5b863333191d58baee4c" ], "author": { "name": "Amit Kumar Salecha", "email": "amit@netxen.com", "time": "Wed Sep 09 18:12:37 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Sep 09 18:12:37 2009 -0700" }, "message": "netxen: fix check for ip addr hashing support\n\nFix typo in checking dest ip has support before\nprogramming destip addresses.\n\nSigned-off-by: Amit Kumar Salecha \u003camit@netxen.com\u003e\nSigned-off-by: Dhananjay Phadke \u003cdhananjay@netxen.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "23bcf634c8bc0d84607a5b863333191d58baee4c", "tree": "bc988ab6230bebf47e1dc22db70f94901ac2eeb5", "parents": [ "ea6a634ef7f0ab1d1f48ba0ad4f50e96d6065312" ], "author": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Wed Sep 09 18:11:23 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Sep 09 18:11:23 2009 -0700" }, "message": "net_sched: fix estimator lock selection for mq child qdiscs\n\nWhen new child qdiscs are attached to the mq qdisc, they are actually\nattached as root qdiscs to the device queues. The lock selection for\nnew estimators incorrectly picks the root lock of the existing and\nto be replaced qdisc, which results in a use-after-free once the old\nqdisc has been destroyed.\n\nMark mq qdisc instances with a new flag and treat qdiscs attached to\nmq as children similar to regular root qdiscs.\n\nAdditionally prevent estimators from being attached to the mq qdisc\nitself since it only updates its byte and packet counters during dumps.\n\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "ea6a634ef7f0ab1d1f48ba0ad4f50e96d6065312", "tree": "fbf291540b824183e0d9292906e9570fd344ebaa", "parents": [ "fa1a9c681377c57e233038e50479e7d7a5cc3108", "b2e3abdc708f8c0eff194af25362fdb239abe241" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Sep 09 17:33:45 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Sep 09 17:33:45 2009 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n" }, { "commit": "b2e3abdc708f8c0eff194af25362fdb239abe241", "tree": "a17ba8b9bab9078d73b7c452d3fa345d54a4908d", "parents": [ "8c8f9ba7051b017e44124666b41c1dc70333a77c" ], "author": { "name": "Holger Schurig", "email": "hs4233@mail.mn-solutions.de", "time": "Wed Sep 09 13:09:54 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 09 11:25:27 2009 -0400" }, "message": "cfg80211: allow scanning on specified frequencies when using wext-compatibility\n\nHandles the case when SIOCSIWSCAN specified iw_scan_req.num_channels and\niw_scan_req.channels[].\n\nSigned-off-by: Holger Schurig \u003chs4233@mail.mn-solutions.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8c8f9ba7051b017e44124666b41c1dc70333a77c", "tree": "89f516d0c9b3dfce4cc801def40a1cb0093ee403", "parents": [ "f42cc2c2909f24faa1381ae139067edeba8c796d" ], "author": { "name": "Vasanthakumar Thiagarajan", "email": "vasanth@atheros.com", "time": "Wed Sep 09 15:25:52 2009 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 09 11:25:27 2009 -0400" }, "message": "ath9k: Initialize the priority gpio for BT coex 3-wire\n\nOops, a stupid mistake in the original patch which adds coex 3-wire\nsupport. Bluetooth priority gpio needs to be gpio 7.\n\nSigned-off-by: Vasanthakumar Thiagarajan \u003cvasanth@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f42cc2c2909f24faa1381ae139067edeba8c796d", "tree": "1cdf23c6b64e69221bd3e17866cc41b3ccb1dba9", "parents": [ "fe12946e66575677879941a14f75b70ca2d2962a" ], "author": { "name": "Vasanthakumar Thiagarajan", "email": "vasanth@atheros.com", "time": "Wed Sep 09 15:25:51 2009 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 09 11:25:26 2009 -0400" }, "message": "ath9k: Get rid of the modparam btcoex_enable\n\nSigned-off-by: Vasanthakumar Thiagarajan \u003cvasanth@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "fe12946e66575677879941a14f75b70ca2d2962a", "tree": "19934be9ee0097aaad6950ea3e588092cc2a94b4", "parents": [ "aeac355d23fb13a2082a8740ae7cf9408a71ec2c" ], "author": { "name": "Vasanthakumar Thiagarajan", "email": "vasanth@atheros.com", "time": "Wed Sep 09 15:25:50 2009 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 09 11:25:26 2009 -0400" }, "message": "ath9k: Enable btcoex based on the subsystem id of the device\n\nSigned-off-by: Vasanthakumar Thiagarajan \u003cvasanth@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "aeac355d23fb13a2082a8740ae7cf9408a71ec2c", "tree": "831acd0d8035e29f4d72b31121a929fb28442cb4", "parents": [ "4d8cd26849737e141ff0aa23fedacef4ea76ea4f" ], "author": { "name": "Vasanthakumar Thiagarajan", "email": "vasanth@atheros.com", "time": "Wed Sep 09 15:25:49 2009 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 09 11:25:25 2009 -0400" }, "message": "ath9k: Store subsystem id in struct hw_version\n\nThis subsystem id will be used later to turn on the btcoex\nsupport.\n\nSigned-off-by: Vasanthakumar Thiagarajan \u003cvasanth@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4d8cd26849737e141ff0aa23fedacef4ea76ea4f", "tree": "512569e8e2b618f0901f8a825bff547d4b78f855", "parents": [ "98a1e2a9260d30ad691fbd1ed778a05e38fe655b" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Tue Sep 08 12:09:47 2009 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 09 11:25:25 2009 -0400" }, "message": "wireless: mark prism54 as deprecated and mark for removal\n\nThe preferred module is p54pci which also supports FullMAC\nPCI / Cardbus devices. We schedule removal for 2.6.34. Reason\nto remove this is no one really is testing prism54 anymore,\nand while it works p54pci provides support for the same hardware.\nIt should be noted I have been told some FullMAC devices may not\nhave worked with the SoftMAC driver but to date we have yet to\nrecieve a single bug report regarding this. If there are users\nout there please let us know!\n\nCc: aquilaver@yahoo.com\nCc: linux-kernel@vger.kernel.org\nCc: Dan Williams \u003cdcbw@redhat.com\u003e\nCc: Kai Engert \u003ckengert@redhat.com\u003e\nCc: Jean Tourrilhes \u003cjt@hpl.hp.com\u003e\nCc: Tim de Waal\u003ctim.dewaal@yahoo.com\u003e\nCc: Roy Marples \u003cuberlord@gentoo.org\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: Christian Lamparter \u003cchunkeey@web.de\u003e\nCc: Björn Steinbrink \u003cB.Steinbrink@gmx.de\u003e\nCc: Tim Gardner \u003ctim.gardner@canonical.com\u003e\nCc: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nCc: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "98a1e2a9260d30ad691fbd1ed778a05e38fe655b", "tree": "8479aab578a5f5d964084f1966d3b7c42af42459", "parents": [ "24ea602e183ca20a7577ebe253323d0e5d0f9847" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Tue Sep 08 19:33:31 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 09 11:19:03 2009 -0400" }, "message": "b44/b43/b43legacy: Fix switch warnings introduced by SSB-SDIO\n\nThis fixes some gcc warnings for switch statements.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "24ea602e183ca20a7577ebe253323d0e5d0f9847", "tree": "9cd9c0b3832cac2f155e633fbed1ce2bf3331f9a", "parents": [ "f020979d5d7c9816c071d0aedf60a889fa4fae40" ], "author": { "name": "Albert Herranz", "email": "albert_herranz@yahoo.es", "time": "Tue Sep 08 19:30:12 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 09 11:19:00 2009 -0400" }, "message": "ssb: Implement SDIO host bus support\n\nAdd support for communicating with a Sonics Silicon Backplane through a\nSDIO interface, as found in the Nintendo Wii WLAN daughter card.\n\nThe Nintendo Wii WLAN card includes a custom Broadcom 4318 chip with\na SDIO host interface.\n\nSigned-off-by: Albert Herranz \u003calbert_herranz@yahoo.es\u003e\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f020979d5d7c9816c071d0aedf60a889fa4fae40", "tree": "c7ce3ee514c55c752fed4a9b3e45063dbea9c413", "parents": [ "7b6840ab5f836a18c4ea98173f73c8d046930efb" ], "author": { "name": "Vasanthakumar Thiagarajan", "email": "vasanth@atheros.com", "time": "Mon Sep 07 17:46:50 2009 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 09 11:18:59 2009 -0400" }, "message": "ath9k: Remove unnecessary casting to u8 in pci_read_config_byte() call\n\nSigned-off-by: Vasanthakumar Thiagarajan \u003cvasanth@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7b6840ab5f836a18c4ea98173f73c8d046930efb", "tree": "61533a306fddb70e61cae6f37d5fb57973e59516", "parents": [ "72c706b775777e8ae546756a5d07ffda4a05ed7b" ], "author": { "name": "Vasanthakumar Thiagarajan", "email": "vasanth@atheros.com", "time": "Mon Sep 07 17:46:49 2009 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 09 11:18:57 2009 -0400" }, "message": "ath9k: Disable ASPM when btcoex is active\n\nSigned-off-by: Vasanthakumar Thiagarajan \u003cvasanth@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "72c706b775777e8ae546756a5d07ffda4a05ed7b", "tree": "c6e43dd15f3dba8d5d34dd8aa148fa28c6590994", "parents": [ "cde1b55b43b71cabb1a94278a809bca21b9df791" ], "author": { "name": "Joe Perches", "email": "joe@perches.com", "time": "Mon Sep 07 11:34:30 2009 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 09 11:18:55 2009 -0400" }, "message": "MAINTAINERS: Add Atheros Linux wireless drivers home page\n\nOn Sun, 2009-09-06 at 12:26 -0700, Luis R. Rodriguez wrote:\n\u003e On Sun, Sep 6, 2009 at 10:59 AM, Joe Perches\u003cjoe@perches.com\u003e wrote:\n\u003e \u003e On Thu, 2009-09-03 at 15:54 -0700, Luis R. Rodriguez wrote:\n\u003e \u003e\u003e I\u0027m pleased to announce the new home page to Atheros Linux wireless drivers:\n\u003e \u003e\u003e http://wireless.kernel.org/en/users/Drivers/Atheros\n\u003e \u003e Perhaps add this to MAINTAINERS?\n\u003e Fine by me, except ath5k and ath9k also have their own respective page\n\u003e so those can also be added.\n\n(cc\u0027s trimmed and maintainers added)\n\nPerhaps this instead:\n\nSigned-off-by: Joe Perches \u003cjoe@perches.com\u003e\nAcked-by: Luis R. Rodriguez \u003cmcgrof@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cde1b55b43b71cabb1a94278a809bca21b9df791", "tree": "c5a58a99108f2706ac313aee64a386e589e9231c", "parents": [ "b0544eb6019a33e836141156a8fbe74a9f8367b4" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Sun Sep 06 16:18:58 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 09 11:18:54 2009 -0400" }, "message": "b43: Fix sparse warning in hw-tkip code\n\nThis fixes a sparse warning in the hardware-TKIP code:\n\ndrivers/net/wireless/b43/xmit.c:272:18: warning: incorrect type in assignment (different base types)\ndrivers/net/wireless/b43/xmit.c:272:18: expected unsigned short [unsigned] [short] \u003cnoident\u003e\ndrivers/net/wireless/b43/xmit.c:272:18: got restricted unsigned short [usertype] \u003cnoident\u003e\n\nThe code should work correctly with and without this patch applied.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b0544eb6019a33e836141156a8fbe74a9f8367b4", "tree": "5947b3f4f61882b83378da18063cec15a314ea6d", "parents": [ "4789666e13fb0b2d45feb1b4a5119a1b997ec84c" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Sun Sep 06 15:42:45 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 09 11:18:52 2009 -0400" }, "message": "b43: Really disable QoS, if requested\n\nCurrently, when QoS-disable is requested, we would leave QoS enabled\nin firmware, but only queue frames on one queue.\nChange that and also tell firmware about disabled QoS, so it\ncompletely ignores all the QoS parameters. Also don\u0027t upload the parameters,\nif QoS is disabled.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4789666e13fb0b2d45feb1b4a5119a1b997ec84c", "tree": "2071e79396f94d56177eab6386b5ce09e799abb8", "parents": [ "fd413da852991e96c555ad7253cc481bc133e221" ], "author": { "name": "Ivo van Doorn", "email": "ivdoorn@gmail.com", "time": "Sun Sep 06 15:14:23 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 09 11:18:14 2009 -0400" }, "message": "rt2x00: Hardcode TX ack timeout and consume time\n\nThe calculated values for the ACK timeout and ACK\nconsume time are different then the values as\nused by the Legacy drivers.\n\nAfter testing from James Ledwith it appeared that\nthe calculated values caused a high amount of TX\nfailures, and the values from the Legacy drivers\nwere the most optimal to prevent TX failure due to\nexcessive retries.\n\nThe symptoms of this problem:\n - Rate control module always falls back to 1Mbs\n - Low throughput when bitrate was fixed\n\nPossible side-effects (not confirmed but highly likely)\n - Problems with DHCP\n - Broken connections due to lack of probe response\n\nThis should fix at least:\nKernel bugzilla reports: [13362], [13009], [9273]\nFedora bugzilla reports: [443203]\nbut possible some additional bugs as well.\n\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "fa1a9c681377c57e233038e50479e7d7a5cc3108", "tree": "719cfaa29913c352e55efcfc35a7de84c839a3f6", "parents": [ "5d5d9c97ff807b643b6c2284dea7fe04ecc74355" ], "author": { "name": "Alexey Dobriyan", "email": "adobriyan@gmail.com", "time": "Wed Sep 09 03:43:50 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Sep 09 03:43:50 2009 -0700" }, "message": "headers: net/ipv[46]/protocol.c header trim\n\nSigned-off-by: Alexey Dobriyan \u003cadobriyan@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5d5d9c97ff807b643b6c2284dea7fe04ecc74355", "tree": "0094d16de4422560387cde40601f81b10792ab62", "parents": [ "6f0e013548fd15fddb952f657a3cc81282641191" ], "author": { "name": "Tushar Gohad", "email": "tgohad@mvista.com", "time": "Wed Sep 09 03:42:23 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Sep 09 03:42:23 2009 -0700" }, "message": "IPv6/addrconf: Fix minor addrlabel thinko \n\nFix apparent thinko related to RTM_DELADDRLABEL, introduced by commit\n2a8cc6c89039e0530a3335954253b76ed0f9339a (\"[IPV6] ADDRCONF: Support\nRFC3484 configurable address selection policy table.\").\n\nSigned-off-by: Tushar Gohad \u003ctgohad@mvista.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "6f0e013548fd15fddb952f657a3cc81282641191", "tree": "d8b910dcdc8fb411518ad9ff088dead5259df81d", "parents": [ "3a5f29c1dbe5814349efacdea483079c470dcc38" ], "author": { "name": "Tobias Klauser", "email": "tklauser@distanz.ch", "time": "Wed Sep 09 01:41:30 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Sep 09 01:41:30 2009 -0700" }, "message": "niu: Use resource_size instead of private function\n\nThe function res_size in drivers/net/niu.c is a copy of resource_size in\nlinux/ioport.h. Remove the function and use resource_size instead.\n\nSigned-off-by: Tobias Klauser \u003ctklauser@distanz.ch\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "fd413da852991e96c555ad7253cc481bc133e221", "tree": "74a56c2b0cc9e20603711fa9cd71e0e1967ac07b", "parents": [ "fea6734a0e444c31c99a1271154bb0281d7908d8" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Sun Sep 06 14:49:43 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 08 16:31:10 2009 -0400" }, "message": "b43: PCMCIA is not experimental anymore\n\nPCMCIA support works well and is not experimental anymore.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "fea6734a0e444c31c99a1271154bb0281d7908d8", "tree": "aa6af0ecb5ddafd7ac35e3f70e11d11c83edcd83", "parents": [ "7f42c37aa676825fea329a7bec2fefe51033b3e9" ], "author": { "name": "Joerg Albert", "email": "jal2@gmx.de", "time": "Sat Sep 05 16:07:47 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 08 16:31:10 2009 -0400" }, "message": "ath,ar9170: implemented conformance test limit calc. for tx power\n\napply the conformance test limits (CTL) stored in the eeprom upon\nthe values calculated for the tx power (ar-\u003epower_*).\n\nThis is based on the implementation in the vendor driver\n(hal/hpmain.c, line 3700 ff.) with one difference:\nIf any ctl mode isn\u0027t found in the eeprom, we fall back to the \"lower\",\nlegacy modes (5GHT20,11A or 2GHT20,11G,11B). Otus only did 5GHT20-\u003e11A.\n\nCurrently CTL are applied for the FCC group only.\n\nSigned-off-by: Joerg Albert \u003cjal2@gmx.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7f42c37aa676825fea329a7bec2fefe51033b3e9", "tree": "39acddd569d9488325efb9b73452ce75b8d42552", "parents": [ "e6c463e3a3d067f5da2c79d5acdb2f626754cdb3" ], "author": { "name": "Joerg Albert", "email": "jal2@gmx.de", "time": "Sat Sep 05 16:07:43 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 08 16:31:09 2009 -0400" }, "message": "ath,ar9170: move CTL_ defines into regd.h\n\nThe ar9170 driver needs the defines for conformance test limit groups\nand cannot include regd_common.h\n\nSigned-off-by: Joerg Albert \u003cjal2@gmx.de\u003e\nAcked-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e6c463e3a3d067f5da2c79d5acdb2f626754cdb3", "tree": "c469a4411d61f47b4b24387a9d3d87c68648ecd6", "parents": [ "69eddc8a37a33479205ac3a3d8575fad1466da90" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Sat Sep 05 11:18:47 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 08 16:31:08 2009 -0400" }, "message": "ssb: Fail ssb modinit, if attach of the buses failed.\n\nSSB modinit should not succeed, if busattach failed.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "69eddc8a37a33479205ac3a3d8575fad1466da90", "tree": "6e8f903b3d04d3a9ce85ab10e8f5a767224039c9", "parents": [ "77ca07ffe1797a0f2f41aa4997c9a5ae433a0be8" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Fri Sep 04 22:57:26 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 08 16:31:08 2009 -0400" }, "message": "b43: remove SHM spinlock\n\nThis removes the SHM spinlock.\nSHM is protected by wl-\u003emutex.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nTested-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "77ca07ffe1797a0f2f41aa4997c9a5ae433a0be8", "tree": "890f5d0b61e8ea7b91a2996edf4b1f331f79269f", "parents": [ "637dae3f637eb7dab447e74362e0dfeded775c7c" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Fri Sep 04 22:56:19 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 08 16:31:07 2009 -0400" }, "message": "b43: Remove PIO RX workqueue\n\nThis removes the PIO RX work. It\u0027s not needed anymore, because\nwe can sleep in the threaded interrupt handler.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nTested-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "637dae3f637eb7dab447e74362e0dfeded775c7c", "tree": "2589ed0c29c0b8f360e100ee0e82ad79f2df3129", "parents": [ "f5d40eedb32aa9a0e226d468e1f89fb676824694" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Fri Sep 04 22:55:00 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 08 16:31:07 2009 -0400" }, "message": "b43: Remove DMA/PIO queue locks\n\nThis removes the DMA/PIO queue locks. Locking is handled by\nwl-\u003emutex now.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nTested-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f5d40eedb32aa9a0e226d468e1f89fb676824694", "tree": "8fb9fce1dd10b71fd940cbb22cbbf12887fe2d4b", "parents": [ "36dbd9548e92268127b0c31b0e121e63e9207108" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Fri Sep 04 22:53:18 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 08 16:31:06 2009 -0400" }, "message": "b43: Remove TX spinlock\n\nThis removes the TX spinlock and defers TX to a workqueue to allow\nlocking wl-\u003emutex instead and to allow sleeping for register accesses.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nTested-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "36dbd9548e92268127b0c31b0e121e63e9207108", "tree": "41d95c5dd824ea43c5f0055bd790b64d7ba8a33a", "parents": [ "b275f28535fc774325bb8ad5f664e6c44a8fbc9b" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Fri Sep 04 22:51:29 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 08 16:31:06 2009 -0400" }, "message": "b43: Use a threaded IRQ handler\n\nUse a threaded IRQ handler to allow locking the mutex and\nsleeping while executing an interrupt.\nThis removes usage of the irq_lock spinlock, but introduces\na new hardirq_lock, which is _only_ used for the PCI/SSB lowlevel\nhard-irq handler. Sleeping busses (SDIO) will use mutex instead.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nTested-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b275f28535fc774325bb8ad5f664e6c44a8fbc9b", "tree": "e48d0e73c55f4662acd6e0b2545879ef3b1e8be1", "parents": [ "d9c35a506ed7770301f705a9070e05f0c5fae4bd" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Tue Sep 01 08:53:49 2009 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 08 16:31:06 2009 -0400" }, "message": "wireless: update cfg80211 kconfig entry\n\ncfg80211 is now *the* wireless configuration API. Lets also\ngive a little explanation as to what it is and refer people to\nthe wireless wiki for more information.\n\nCc: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d9c35a506ed7770301f705a9070e05f0c5fae4bd", "tree": "3303836f0b9e938da37c68a3a2b5bfd96a3dd8b9", "parents": [ "8813262ea79acf9daa0e03901bdfe93db4dc4ca5" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@googlemail.com", "time": "Thu Sep 03 20:25:31 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 08 16:31:05 2009 -0400" }, "message": "ar9170: implement frequency calibration for one-stage/openfw\n\nThis patch ports some code from the vendor driver, which is\nsupposed to upload the right calibration values for the\nchosen frequency.\n\nIn theory, this should give a better range and throughput\nfor all users with the open, or one-stage firmware.\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8813262ea79acf9daa0e03901bdfe93db4dc4ca5", "tree": "0b5efbbcb7f6f2395807b0d5987cca028203f217", "parents": [ "7ea310be65bfcbc6e2395844fd3498762dc2aea6" ], "author": { "name": "Sujith", "email": "Sujith.Manoharan@atheros.com", "time": "Thu Sep 03 12:08:53 2009 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 08 16:31:05 2009 -0400" }, "message": "ath9k: Fix channelFlags for 2GHZ\n\nCHANNEL_G has to be set for 2GHZ channels since\nIS_CHAN_G() checks for this in channelFlags and not in\nchanmode. To make things messier, ath9k_hw_process_ini()\nchecks for CHANNEL_G in chanmode and not in channelFlags.\nThe supreme, brain-searing fix is to set the\nflag in both cases.\n\nSigned-off-by: Sujith \u003cSujith.Manoharan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7ea310be65bfcbc6e2395844fd3498762dc2aea6", "tree": "78bf6a77bfd2591429a50b0e907563884bdcc72e", "parents": [ "fc548af877374f7e26c4f670f3843c6d29e02a98" ], "author": { "name": "Sujith", "email": "Sujith.Manoharan@atheros.com", "time": "Thu Sep 03 12:08:43 2009 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 08 16:31:05 2009 -0400" }, "message": "ath9k: Fix RX Filter handling for BAR\n\nBAR frames have to be sent to mac80211 only if the\ncurrent channel is HT. Also, move the macro to\nenum ath9k_rx_filter.\n\nSigned-off-by: Sujith \u003cSujith.Manoharan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "fc548af877374f7e26c4f670f3843c6d29e02a98", "tree": "8c32540ab846508cb187572845ab33438c43638f", "parents": [ "580171f7cd08687cdf1b263aabb35608b3c37433" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Wed Sep 02 17:06:21 2009 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 08 16:31:04 2009 -0400" }, "message": "ath9k: claim irq for ath9k, not ath for pci\n\nath9k ahb requests an IRQ and indicates \u0027ath9k\u0027 claimed it,\nath9k pci requests an IRQ and indicates \u0027ath\u0027 claims it;\nsince \u0027ath\u0027 is another module sync both ahb and pci to claim\nthe irq using \u0027ath9k\u0027.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "580171f7cd08687cdf1b263aabb35608b3c37433", "tree": "f11b817d537e100df257256cb6937d9b73640d33", "parents": [ "db6be53cbaf118fdad5bdca211a19ca5354c9462" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Wed Sep 02 17:02:18 2009 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 08 16:31:04 2009 -0400" }, "message": "ath9k: propagate errors on ath_init_device() and request_irq()\n\nWe\u0027ve cleaned up ath_init_device() and its children enough\nto pass meaninful errors back from probe. When this fails\nit means our device could not be initialized and a meaninful\nerror will have been passed.\n\nDo the same for request_irq() and also synchronize the error\nmessages while at it.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "db6be53cbaf118fdad5bdca211a19ca5354c9462", "tree": "003f64adcfef4624fa9e691ab450338dd996a4f3", "parents": [ "5c630ce7e6cb144a29fd5a993363f4928fb4b890" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Wed Sep 02 16:34:57 2009 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 08 16:31:04 2009 -0400" }, "message": "ath9k: propagate ieee80211_alloc_hw() failure\n\nThe -ENOMEM was never being passed on failure.\nWhile at it use dev_err() as ahb does upon failure.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5c630ce7e6cb144a29fd5a993363f4928fb4b890", "tree": "bf2f366012d1f16a88427c05139a85389bc405b2", "parents": [ "6ec1c69a8f6492fd25722f4762721921da074c12" ], "author": { "name": "Joerg Albert", "email": "jal2@gmx.de", "time": "Thu Sep 03 01:02:59 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 08 16:31:03 2009 -0400" }, "message": "ar9170: added phy register initialisation from eeprom values\n\nThis patch adds the initialisation of some PHY registers\nfrom the modal_header[] values in the EEPROM\n(see otus/hal/hpmain.c, line 333 ff.)\n\nSigned-off-by: Joerg Albert \u003cjal2@gmx.de\u003e\nAcked-by: Christian Lamparter \u003cchunkeey@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3a5f29c1dbe5814349efacdea483079c470dcc38", "tree": "1c8ab87f7319a4e4923be8175dce3eae26981c09", "parents": [ "cf33ce15463b784a1d648905fc067fa4d6b17466" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Sep 07 02:03:37 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Sep 07 02:03:37 2009 -0700" }, "message": "r8169: Fix warning in rtl8169_start_xmit().\n\nReported by Stephen Rothwell:\n\ndrivers/net/r8169.c: In function \u0027rtl8169_start_xmit\u0027:\ndrivers/net/r8169.c:3421: warning: label \u0027out\u0027 defined but not used\n\nIntroduced by commit 61357325f377889a1daffa14962d705dc814dd0e (\"netdev:\nconvert bulk of drivers to netdev_tx_t\").\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "cf33ce15463b784a1d648905fc067fa4d6b17466", "tree": "3fdae8d042cf08fc2e7463b6d368402b172f11f2", "parents": [ "5dbc46506a4f7b9f564bb7589a49ed32bc1caa15" ], "author": { "name": "Randy Dunlap", "email": "randy.dunlap@oracle.com", "time": "Fri Sep 04 14:20:37 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Sep 07 01:56:52 2009 -0700" }, "message": "net: fix hydra printk format warning\n\nm68k:\ndrivers/net/hydra.c:178: warning: format \u0027%08lx\u0027 expects type \u0027long unsigned int\u0027, but argument 3 has type \u0027resource_size_t\u0027\n\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5dbc46506a4f7b9f564bb7589a49ed32bc1caa15", "tree": "160ba16158671e2967e37f9d7feab8dbc2707141", "parents": [ "32e6a0c82e7a7991a02414d830f262e1f4db73e6" ], "author": { "name": "Krzysztof Halasa", "email": "khc@pm.waw.pl", "time": "Sat Sep 05 03:59:49 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Sep 07 01:56:49 2009 -0700" }, "message": "IXP42x HSS support for setting internal clock rate\n\nHSS usually uses external clocks, so it\u0027s not a big deal. Internal clock\nis used for direct DTE-DTE connections and when the DCE doesn\u0027t provide\nit\u0027s own clock.\n\nThis also depends on the oscillator frequency. Intel seems to have\ncalculated the clock register settings for 33.33 MHz (66.66 MHz timer\nbase). Their settings seem quite suboptimal both in terms of average\nfrequency (60 ppm is unacceptable for G.703 applications, their primary\nintended usage(?)) and jitter.\n\nMany (most?) platforms use a 33.333 MHz oscillator, a 10 ppm difference\nfrom Intel\u0027s base.\n\nInstead of creating static tables, I\u0027ve created a procedure to program\nthe HSS clock register. The register consists of 3 parts (A, B, C).\nThe average frequency (\u003d bit rate) is:\n66.66x MHz / (A + (B + 1) / (C + 1))\nThe procedure aims at the closest average frequency, possibly at the\ncost of increased jitter. Nobody would be able to directly drive an\nunbufferred transmitter with a HSS anyway, and the frequency error is\nwhat it really counts.\n\nI\u0027ve verified the above with an oscilloscope on IXP425. It seems IXP46x\nand possibly IXP43x use a bit different clock generation algorithm - it\nlooks like the avg frequency is:\n(on IXP465) 66.66x MHz / (A + B / (C + 1)).\nAlso they use much greater precomputed A and B - on IXP425 it would\nsimply result in more jitter, but I don\u0027t know how does it work on\nIXP46x (perhaps 3 least significant bits aren\u0027t used?).\n\nAnyway it looks that they were aiming for exactly +60 ppm or -60 ppm,\nwhile \u003c1 ppm is typically possible (with a synchronized clock, of\ncourse).\n\nThe attached patch makes it possible to set almost any bit rate\n(my IXP425 533 MHz quits at \u003e 22 Mb/s if a single port is used, and the\nminimum is ca. 65 Kb/s).\n\nThis is independent of MVIP (multi-E1/T1 on one HSS) mode.\n\nSigned-off-by: Krzysztof Hałasa \u003ckhc@pm.waw.pl\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "32e6a0c82e7a7991a02414d830f262e1f4db73e6", "tree": "633a0b94bae892142b4874efbf49dfe0dca79032", "parents": [ "c190e3c8f6b22004b9cdc62ee5e7ba2fa5f74dc7" ], "author": { "name": "Krzysztof Halasa", "email": "khc@pm.waw.pl", "time": "Sat Sep 05 00:54:30 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Sep 07 01:56:45 2009 -0700" }, "message": "WAN: remove deprecated PCI_DEVICE_ID from PCI200SYN driver.\n\nPCI200SYN has its own PCI subsystem device ID for 3+ years, now it\u0027s\ntime to remove the generic PLX905[02] ID from the driver. Anyone with\nold EEPROM data will have to run the upgrade.\n\nHaving the generic PLX905[02] (PCI-local bus bridge) ID is harmful\nas the driver tries to handle other devices based on these bridges.\n\nSigned-off-by: Krzysztof Halasa \u003ckhc@pm.waw.pl\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c190e3c8f6b22004b9cdc62ee5e7ba2fa5f74dc7", "tree": "3ad85f57a622f6410cf897676687aa30b73cfddb", "parents": [ "84517482e19bc775de7b3b4e998dee2f506bc34e" ], "author": { "name": "Ajit Khaparde", "email": "ajitk@serverengines.com", "time": "Fri Sep 04 03:12:29 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Sep 07 01:56:41 2009 -0700" }, "message": "be2net: Code changes in Tx path to use skb_dma_map/skb_dma_unmap\n\nCode changes to\n - In the tx completion processing, there were instances of unmapping a\nmemory as a page which was originally mapped as single. This patch takes care\nof this by using skb_dma_map()/skb_dma_unmap() to map/unmap Tx buffers.\n - set gso_max_size to 65535. This was not done till now.\n\nSigned-off-by: Ajit Khaparde \u003cajitk@serverengines.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "84517482e19bc775de7b3b4e998dee2f506bc34e", "tree": "ae3491a5cf8891feef8c2896ef50758d763646f2", "parents": [ "384824281caa9ac4b76664033416f1eac4a652fe" ], "author": { "name": "Ajit Khaparde", "email": "ajitk@serverengines.com", "time": "Fri Sep 04 03:12:16 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Sep 07 01:56:38 2009 -0700" }, "message": "be2net: Changes to support flashing of the be2 network adapter\n\nChanges to support flashing of the be2 network adapter using the\nrequest_firmware() \u0026 ethtool infrastructure. The trigger to flash the device\nwill come from ethtool utility. The driver will invoke request_firmware()\nto start the flash process. The file containing the flash image is expected\nto be available in /lib/firmware/\n\nSigned-off-by: Ajit Khaparde \u003cajitk@serverengines.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "384824281caa9ac4b76664033416f1eac4a652fe", "tree": "335ce38565014ba7cea4a7f096794a2d23e26c1f", "parents": [ "5877e55f32bb50956c9a1df8e7db3fbc67dc47b6" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Fri Sep 04 05:33:46 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Sep 07 01:56:33 2009 -0700" }, "message": "wan: dlci/sdla transmit return dehacking\n\nThis is a brute force removal of the wierd slave interface done for\nDLCI -\u003e SDLA transmit. Before it was using non-standard return values\nand freeing skb in caller. This changes it to using normal return\nvalues, and freeing in the callee. Luckly only one driver pair was\ndoing this. Not tested on real hardware, in fact I wonder if this\ndriver pair is even being used by any users.\n\nSigned-off-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5877e55f32bb50956c9a1df8e7db3fbc67dc47b6", "tree": "23536b2d7f54cdc84fab1781b4177697fa300e07", "parents": [ "2b9e62ee7b2f1971c01fdaa7653c9dae7b571187" ], "author": { "name": "Dhananjay Phadke", "email": "dhananjay@netxen.com", "time": "Sat Sep 05 17:43:12 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Sep 07 01:53:22 2009 -0700" }, "message": "netxen: update version to 4.0.50\n\nSigned-off-by: Dhananjay Phadke \u003cdhananjay@netxen.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "2b9e62ee7b2f1971c01fdaa7653c9dae7b571187", "tree": "2985333288b3c984009aca8db6b44a1cf99b4703", "parents": [ "195c5f9829407857cba86f083caec6302b1fd8e1" ], "author": { "name": "Dhananjay Phadke", "email": "dhananjay@netxen.com", "time": "Sat Sep 05 17:43:11 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Sep 07 01:53:18 2009 -0700" }, "message": "netxen: refactor firmware info code\n\no Combine netxen_get_firmware_info(), netxen_check_options()\n so that they are updated every time firmware is reset.\no Set dma mask everytime firmware is reset.\n\nSigned-off-by: Dhananjay Phadke \u003cdhananjay@netxen.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "195c5f9829407857cba86f083caec6302b1fd8e1", "tree": "d208ca059eaa3f6dd0dd4fb23226f84584a341e4", "parents": [ "d0725e4d3ccf603c4fcf3589850cb464c927d42a" ], "author": { "name": "Amit Kumar Salecha", "email": "amit@netxen.com", "time": "Sat Sep 05 17:43:10 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Sep 07 01:53:13 2009 -0700" }, "message": "netxen: pre calculate register addresses\n\nFor registers accessed in fast path (interrupt / softirq)\navoid expensive I/O address translation. These registers\nare directly mapped in PCI bar 0 and do not require\nany window checks.\n\nSigned-off-by: Amit Kumar Salecha \u003camit@netxen.com\u003e\nSigned-off-by: Dhananjay Phadke \u003cdhananjay@netxen.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "d0725e4d3ccf603c4fcf3589850cb464c927d42a", "tree": "bc7b737bab7b103796fd04479db4f28ced45090b", "parents": [ "6a581e93981e8838c85e407303186faf937830d3" ], "author": { "name": "Amit Kumar Salecha", "email": "amit@netxen.com", "time": "Sat Sep 05 17:43:09 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Sep 07 01:53:09 2009 -0700" }, "message": "netxen: fix ip addr hashing after firmware reset\n\nReprogram local IP addresses after firmware is reset\nor after resuming from suspend.\n\nSigned-off-by: Amit Kumar Salecha \u003camit@netxen.com\u003e\nSigned-off-by: Dhananjay Phadke \u003cdhananjay@netxen.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "6a581e93981e8838c85e407303186faf937830d3", "tree": "3e2f083971fc33d4a3e88e7cc37e346f775d7168", "parents": [ "db4cfd8a6149e778befb2ff6e6f91cdc6394cbe6" ], "author": { "name": "Dhananjay Phadke", "email": "dhananjay@netxen.com", "time": "Sat Sep 05 17:43:08 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Sep 07 01:53:06 2009 -0700" }, "message": "netxen: firmware hang detection\n\nImplement state machine to detect firmware hung state\nand recover. Since firmware will be shared by all PCI\nfunctions that have different class drivers (NIC or\nFCOE or iSCSI), explicit hardware based serialization\nis required for initializing firmware.\n\no Used global scratchpad register to maintain device\n reference count. Every probed pci function adds to\n ref count.\n\no Implement timer (delayed work) for each pci func\n that checks firmware heartbit every 5 sec and detaches\n itself if firmware is dead. Last detaching function\n reloads firmware. Other functions wait for firmware\n init, and re-attach themselves.\n\nHeartbit is not supported by NX2031 firmware.\n\nSigned-off-by: Amit Kumar Salecha \u003camit@netxen.com\u003e\nSigned-off-by: Dhananjay Phadke \u003cdhananjay@netxen.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "db4cfd8a6149e778befb2ff6e6f91cdc6394cbe6", "tree": "dd1faddbbce164b86e58a7cde54bfbd7b3f528bd", "parents": [ "6ec1c69a8f6492fd25722f4762721921da074c12" ], "author": { "name": "Dhananjay Phadke", "email": "dhananjay@netxen.com", "time": "Sat Sep 05 17:43:07 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Sep 07 01:53:01 2009 -0700" }, "message": "netxen: handle firmware load errors\n\nUnwind allocations and release file firmware when\nwhen firmware load fails.\n\nSigned-off-by: Dhananjay Phadke \u003cdhananjay@netxen.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "6ec1c69a8f6492fd25722f4762721921da074c12", "tree": "a78323d1f7f84acbe08c25d7300b935ae4bb7c62", "parents": [ "589983cd21f4a2e4ed74a958805a90fa676845c5" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Sep 06 01:58:51 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Sep 06 02:07:05 2009 -0700" }, "message": "net_sched: add classful multiqueue dummy scheduler\n\nThis patch adds a classful dummy scheduler which can be used as root qdisc\nfor multiqueue devices and exposes each device queue as a child class.\n\nThis allows to address queues individually and graft them similar to regular\nclasses. Additionally it presents an accumulated view of the statistics of\nall real root qdiscs in the dummy root.\n\nTwo new callbacks are added to the qdisc_ops and qdisc_class_ops:\n\n- cl_ops-\u003eselect_queue selects the tx queue number for new child classes.\n\n- qdisc_ops-\u003eattach() overrides root qdisc device grafting to attach\n non-shared qdiscs to the queues.\n\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "589983cd21f4a2e4ed74a958805a90fa676845c5", "tree": "21ce556958da203400d3e9d30911ff330be39e90", "parents": [ "af356afa010f3cd2c8b8fcc3bce90f7a7b7ec02a" ], "author": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Fri Sep 04 06:41:20 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Sep 06 02:07:05 2009 -0700" }, "message": "net_sched: move dev_graft_qdisc() to sch_generic.c\n\nIt will be used in a following patch by the multiqueue qdisc.\n\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "af356afa010f3cd2c8b8fcc3bce90f7a7b7ec02a", "tree": "302d938363bbaec3e69a58e36dbf8a304b24144c", "parents": [ "5b9a9ccfad8553dbf7a9b17ba78bad70215ed0e2" ], "author": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Fri Sep 04 06:41:18 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Sep 06 02:07:03 2009 -0700" }, "message": "net_sched: reintroduce dev-\u003eqdisc for use by sch_api\n\nCurrently the multiqueue integration with the qdisc API suffers from\na few problems:\n\n- with multiple queues, all root qdiscs use the same handle. This means\n they can\u0027t be exposed to userspace in a backwards compatible fashion.\n\n- all API operations always refer to queue number 0. Newly created\n qdiscs are automatically shared between all queues, its not possible\n to address individual queues or restore multiqueue behaviour once a\n shared qdisc has been attached.\n\n- Dumps only contain the root qdisc of queue 0, in case of non-shared\n qdiscs this means the statistics are incomplete.\n\nThis patch reintroduces dev-\u003eqdisc, which points to the (single) root qdisc\nfrom userspace\u0027s point of view. Currently it either points to the first\n(non-shared) default qdisc, or a qdisc shared between all queues. The\nfollowing patches will introduce a classful dummy qdisc, which will be used\nas root qdisc and contain the per-queue qdiscs as children.\n\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5b9a9ccfad8553dbf7a9b17ba78bad70215ed0e2", "tree": "1454e8121fef6635a615f6766b3fdbff678ae63d", "parents": [ "de6d5cdf881353f83006d5f3e28ac4fffd42145e" ], "author": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Fri Sep 04 06:41:17 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Sep 06 02:07:02 2009 -0700" }, "message": "net_sched: remove some unnecessary checks in classful schedulers\n\nThe class argument to the -\u003egraft(), -\u003eleaf(), -\u003edump(), -\u003edump_stats() all\noriginate from either -\u003eget() or -\u003ewalk() and are always valid.\n\nRemove unnecessary checks.\n\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "de6d5cdf881353f83006d5f3e28ac4fffd42145e", "tree": "edc032e4d0a868578780facdd28fb0ee277aadc3", "parents": [ "71ebe5e91947392bc276af713827eab12b6db8e4" ], "author": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Fri Sep 04 06:41:16 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Sep 06 02:07:02 2009 -0700" }, "message": "net_sched: make cls_ops-\u003echange and cls_ops-\u003edelete optional\n\nSome schedulers don\u0027t support creating, changing or deleting classes.\nMake the respective callbacks optionally and consistently return\n-EOPNOTSUPP for unsupported operations, instead of currently either\n-EOPNOTSUPP, -ENOSYS or no error.\n\nIn case of sch_prio and sch_multiq, the removed operations additionally\nchecked for an invalid class. This is not necessary since the class\nargument can only orginate from -\u003eget() or in case of -\u003echange is 0\nfor creation of new classes, in which case -\u003echange() incorrectly\nreturned -ENOENT.\n\nAs a side-effect, this patch fixes a possible (root-only) NULL pointer\nfunction call in sch_ingress, which didn\u0027t implement a so far mandatory\n-\u003edelete() operation.\n\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "71ebe5e91947392bc276af713827eab12b6db8e4", "tree": "198ff02e23f8606ff2a3bec51c7044ec408e19c4", "parents": [ "c9f1d0389b962521af1e2b699c8ee5e299d77b85" ], "author": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Fri Sep 04 06:41:15 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Sep 06 02:06:12 2009 -0700" }, "message": "net_sched: make cls_ops-\u003etcf_chain() optional\n\nSome qdiscs don\u0027t support attaching filters. Handle this centrally in\ncls_api and return a proper errno code (EOPNOTSUPP) instead of EINVAL.\n\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c9f1d0389b962521af1e2b699c8ee5e299d77b85", "tree": "e317e8b012be8b31b303bdb3f6ee5e3929de0a7b", "parents": [ "b1f57195585e376d1944c32c046359640b06a669" ], "author": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Fri Sep 04 06:41:13 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 04 23:10:15 2009 -0700" }, "message": "net_sched: fix class grafting errno codes\n\nIf the parent qdisc doesn\u0027t support classes, use EOPNOTSUPP.\nIf the parent class doesn\u0027t exist, use ENOENT. Currently EINVAL\nis returned in both cases.\n\nAdditionally check whether grafting is supported and remove a now\nunnecessary graft function from sch_ingress.\n\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "b1f57195585e376d1944c32c046359640b06a669", "tree": "5e49a5e0077520f92e4e2bfd57caf90e303784ae", "parents": [ "f1751c57f7bb816c9b6b4cb5d79c703aaa7199da" ], "author": { "name": "Brian Haley", "email": "brian.haley@hp.com", "time": "Fri Sep 04 20:36:52 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Sep 04 20:36:52 2009 -0700" }, "message": "netlink: silence compiler warning\n\n CC net/netlink/genetlink.o\nnet/netlink/genetlink.c: In function ‘genl_register_mc_group’:\nnet/netlink/genetlink.c:139: warning: ‘err’ may be used uninitialized in this function\n\nFrom following the code \u0027err\u0027 is initialized, but set it to zero to\nsilence the warning.\n\nSigned-off-by: Brian Haley \u003cbrian.haley@hp.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "f1751c57f7bb816c9b6b4cb5d79c703aaa7199da", "tree": "68e75889f4fd4b576f50bd52088c79f7c837323d", "parents": [ "be2971438dec2e2d041af4701472a93a7dd03642" ], "author": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Fri Sep 04 18:21:03 2009 -0400" }, "committer": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Fri Sep 04 18:21:03 2009 -0400" }, "message": "sctp: Catch bogus stream sequence numbers\n\nSince our TSN map is capable of holding at most a 4K chunk gap,\nthere is no way that during this gap, a stream sequence number\n(unsigned short) can wrap such that the new number is smaller\nthen the next expected one. If such a case is encountered,\nthis is a protocol violation.\n\nSigned-off-by: Vlad Yasevich \u003cvladislav.yasevich@hp.com\u003e\n" }, { "commit": "be2971438dec2e2d041af4701472a93a7dd03642", "tree": "9b69e184f1be9815f471f06a5456a68aef59578f", "parents": [ "9237ccbc0b22b5aa5396463ba0b14dc5efe5b98c" ], "author": { "name": "Wei Yongjun", "email": "yjwei@cn.fujitsu.com", "time": "Fri Sep 04 14:34:06 2009 +0800" }, "committer": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Fri Sep 04 18:21:02 2009 -0400" }, "message": "sctp: remove dup code in net/sctp/output.c\n\nUse sctp_packet_reset() instead of dup code.\n\nSigned-off-by: Wei Yongjun \u003cyjwei@cn.fujitsu.com\u003e\nSigned-off-by: Vlad Yasevich \u003cvladislav.yasevich@hp.com\u003e\n" }, { "commit": "9237ccbc0b22b5aa5396463ba0b14dc5efe5b98c", "tree": "ac6aed9bc6a832b0d17895a55039bc6ba65100c7", "parents": [ "723884339f90a9c420783135168cc1045750eb5d" ], "author": { "name": "Wei Yongjun", "email": "yjwei@cn.fujitsu.com", "time": "Fri Sep 04 14:33:19 2009 +0800" }, "committer": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Fri Sep 04 18:21:02 2009 -0400" }, "message": "sctp: turn flags in \u0027struct sctp_association\u0027 into bit fields\n\nThis shrinks the size of struct sctp_association a little.\n\nSigned-off-by: Wei Yongjun \u003cyjwei@cn.fujitsu.com\u003e\nSigned-off-by: Vlad Yasevich \u003cvladislav.yasevich@hp.com\u003e\n" }, { "commit": "723884339f90a9c420783135168cc1045750eb5d", "tree": "c8538602e56f2310470b0970bf121a1000313401", "parents": [ "8da645e101a8c20c6073efda3c7cc74eec01b87f" ], "author": { "name": "Bhaskar Dutta", "email": "bhaskie@gmail.com", "time": "Thu Sep 03 17:25:47 2009 +0530" }, "committer": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Fri Sep 04 18:21:01 2009 -0400" }, "message": "sctp: Sysctl configuration for IPv4 Address Scoping\n\nThis patch introduces a new sysctl option to make IPv4 Address Scoping\nconfigurable \u003cdraft-stewart-tsvwg-sctp-ipv4-00.txt\u003e.\n\nIn networking environments where DNAT rules in iptables prerouting\nchains convert destination IP\u0027s to link-local/private IP addresses,\nSCTP connections fail to establish as the INIT chunk is dropped by the\nkernel due to address scope match failure.\nFor example to support overlapping IP addresses (same IP address with\ndifferent vlan id) a Layer-5 application listens on link local IP\u0027s,\nand there is a DNAT rule that maps the destination IP to a link local\nIP. Such applications never get the SCTP INIT if the address-scoping\ndraft is strictly followed.\n\nThis sysctl configuration allows SCTP to function in such\nunconventional networking environments.\n\nSysctl options:\n0 - Disable IPv4 address scoping draft altogether\n1 - Enable IPv4 address scoping (default, current behavior)\n2 - Enable address scoping but allow IPv4 private addresses in init/init-ack\n3 - Enable address scoping but allow IPv4 link local address in init/init-ack\n\nSigned-off-by: Bhaskar Dutta \u003cbhaskar.dutta@globallogic.com\u003e\nSigned-off-by: Vlad Yasevich \u003cvladislav.yasevich@hp.com\u003e\n" }, { "commit": "8da645e101a8c20c6073efda3c7cc74eec01b87f", "tree": "3d888e6da02f60acb18b52f6e6d8dac64e28564c", "parents": [ "a803c942303e6a4ef0ab6b80114529852cffa058" ], "author": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Fri Sep 04 18:21:01 2009 -0400" }, "committer": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Fri Sep 04 18:21:01 2009 -0400" }, "message": "sctp: Get rid of an extra routing lookup when adding a transport.\n\nWe used to perform 2 routing lookups for a new transport: one\njust for path mtu detection, and one to actually route to destination\nand path mtu update when sending a packet. There is no point in doing\nboth of them, especially since the first one just for path mtu doesn\u0027t\ntake into account source address and sometimes gives the wrong route,\ncausing path mtu updates anyway.\n\nWe now do just the one call to do both route to destination and get\npath mtu updates.\n\nSigned-off-by: Vlad Yasevich \u003cvladislav.yasevich@hp.com\u003e\n" }, { "commit": "a803c942303e6a4ef0ab6b80114529852cffa058", "tree": "d1da47a93ef1683957256a582ed2fcb27d3e9a4b", "parents": [ "4007cc88ceec8892b74792f0a10983b140beae72" ], "author": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Fri Sep 04 18:21:01 2009 -0400" }, "committer": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Fri Sep 04 18:21:01 2009 -0400" }, "message": "sctp: Turn flags in \u0027sctp_packet\u0027 into bit fields\n\nThis shrinks the size of sctp_packet a little.\n\nSigned-off-by: Vlad Yasevich \u003cvladislav.yasevich@hp.com\u003e\n" }, { "commit": "4007cc88ceec8892b74792f0a10983b140beae72", "tree": "6a1af00a4ca24155255c031fdcd05b7d6ead59ab", "parents": [ "d521c08f4c16d27f193718da778503a6472501da" ], "author": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Fri Sep 04 18:21:00 2009 -0400" }, "committer": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Fri Sep 04 18:21:00 2009 -0400" }, "message": "sctp: Correctly track if AUTH has been bundled.\n\nWe currently track if AUTH has been bundled using the \u0027auth\u0027\npointer to the chunk. However, AUTH is disallowed after DATA\nis already in the packet, so we need to instead use the\n\u0027has_auth\u0027 field.\n\nSigned-off-by: Vlad Yasevich \u003cvladislav.yasevich@hp.com\u003e\n" }, { "commit": "d521c08f4c16d27f193718da778503a6472501da", "tree": "44bc280f8711bf13942a192037cf5f96670053b7", "parents": [ "31b02e1549406efa346534acad956a42bc3f28c4" ], "author": { "name": "Wei Yongjun", "email": "yjwei@cn.fujitsu.com", "time": "Wed Sep 02 13:05:33 2009 +0800" }, "committer": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Fri Sep 04 18:21:00 2009 -0400" }, "message": "sctp: fix to reset packet information after packet transmit\n\nThe packet information does not reset after packet transmit, this\nmay cause some problems such as following DATA chunk be sent without\nAUTH chunk, even if the authentication of DATA chunk has been\nrequested by the peer.\n\nSigned-off-by: Wei Yongjun \u003cyjwei@cn.fujitsu.com\u003e\nSigned-off-by: Vlad Yasevich \u003cvladislav.yasevich@hp.com\u003e\n" }, { "commit": "31b02e1549406efa346534acad956a42bc3f28c4", "tree": "3acc807275810eb2efdc5fc2744bdfc3528488c2", "parents": [ "f68b2e05f326971cd76c65aa91a1a41771dd7485" ], "author": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Fri Sep 04 18:21:00 2009 -0400" }, "committer": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Fri Sep 04 18:21:00 2009 -0400" }, "message": "sctp: Failover transmitted list on transport delete\n\nAdd-IP feature allows users to delete an active transport. If that\ntransport has chunks in flight, those chunks need to be moved to another\ntransport or association may get into unrecoverable state.\n\nReported-by: Rafael Laufer \u003crlaufer@cisco.com\u003e\nSigned-off-by: Vlad Yasevich \u003cvladislav.yasevich@hp.com\u003e\n" }, { "commit": "f68b2e05f326971cd76c65aa91a1a41771dd7485", "tree": "2940d83f3787570cc030791378ee23b89b941662", "parents": [ "cb95ea32a457871f72752164de8d94fa20f4703c" ], "author": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Fri Sep 04 18:21:00 2009 -0400" }, "committer": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Fri Sep 04 18:21:00 2009 -0400" }, "message": "sctp: Fix SCTP_MAXSEG socket option to comply to spec.\n\nWe had a bug that we never stored the user-defined value for\nMAXSEG when setting the value on an association. Thus future\nPMTU events ended up re-writing the frag point and increasing\nit past user limit. Additionally, when setting the option on\nthe socket/endpoint, we effect all current associations, which\nis against spec.\n\nNow, we store the user \u0027maxseg\u0027 value along with the computed\n\u0027frag_point\u0027. We inherit \u0027maxseg\u0027 from the socket at association\ncreation and use it as an upper limit for \u0027frag_point\u0027 when its\nset.\n\nSigned-off-by: Vlad Yasevich \u003cvladislav.yasevich@hp.com\u003e\n" }, { "commit": "cb95ea32a457871f72752164de8d94fa20f4703c", "tree": "0a419cdc3fe5e7e2d5fa5036a40d93a4bb6aac42", "parents": [ "b29e7907288554db9c987c36facfd0304ee8ff5a" ], "author": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Fri Sep 04 18:20:59 2009 -0400" }, "committer": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Fri Sep 04 18:20:59 2009 -0400" }, "message": "sctp: Don\u0027t do NAGLE delay on large writes that were fragmented small\n\nSCTP will delay the last part of a large write due to NAGLE, if that\npart is smaller then MTU. Since we are doing large writes, we might\nas well send the last portion now instead of waiting untill the next\nlarge write happens. The small portion will be sent as is regardless,\nso it\u0027s better to not delay it.\n\nThis is a result of much discussions with Wei Yongjun \u003cyjwei@cn.fujitsu.com\u003e\nand Doug Graham \u003cdgraham@nortel.com\u003e. Many thanks go out to them.\n\nSigned-off-by: Vlad Yasevich \u003cvladislav.yasevich@hp.com\u003e\n" }, { "commit": "b29e7907288554db9c987c36facfd0304ee8ff5a", "tree": "5a20e7c0e59cfc986b20b915f5bd624850d56619", "parents": [ "d4d6fb5787a6ef6e1dab731d617ebda6be73d561" ], "author": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Fri Sep 04 18:20:59 2009 -0400" }, "committer": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Fri Sep 04 18:20:59 2009 -0400" }, "message": "sctp: Nagle delay should be based on path mtu\n\nThe decision to delay due to Nagle should be based on the path mtu\nand future packet size. We currently incorrectly base it on\n\u0027frag_point\u0027 which is the SCTP DATA segment size, and also we do\nnot count DATA chunk header overhead in the computation. This\nactuall allows situations where a user can set low \u0027frag_point\u0027,\nand then send small messages without delay.\n\nSigned-off-by: Vlad Yasevich \u003cvladislav.yasevich@hp.com\u003e\n" } ], "next": "d4d6fb5787a6ef6e1dab731d617ebda6be73d561" }