)]}'
{
  "log": [
    {
      "commit": "da995a8aee044bc5d0847e19e351cd48a2cb8bcc",
      "tree": "000cb11c5e49e1bc91a2212ed5a2299f279c990b",
      "parents": [
        "4979d18fe105297f8f065743f31f8f735da8df2d"
      ],
      "author": {
        "name": "Aleksey Senin",
        "email": "alex@senin.name",
        "time": "Thu Dec 02 11:44:49 2010 +0000"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Jan 12 14:49:17 2011 -0800"
      },
      "message": "IB/mlx4: Handle protocol field in multicast table\n\nThe newest device firmware stores IB vs. Ethernet protocol in two bits\nin members_count field of multicast group table (0: Infiniband, 1:\nEthernet).  When changing the QP members count for a multicast group,\nit important not to reset this information.  When calling multicast\nattach first time, the protocol type should be specified.  In this\npatch we always set it IB, but in the future we will handle Ethernet\ntoo.  When looking for a QP, the protocol type shoud be checked too.\n\nSigned-off-by: Aleksey Senin \u003calekseys@voltaire.com\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "9e5fca251f44832cb996961048ea977f80faf6ea",
      "tree": "05d1df04502478ed71b78f63a861aa5cc67ef773",
      "parents": [
        "56083ab17e0075e538270823c374b59cc97e73b9",
        "116e9535fe5e00bafab7a637f306b110cf95cff5"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Oct 26 17:54:22 2010 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Oct 26 17:54:22 2010 -0700"
      },
      "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (63 commits)\n  IB/qib: clean up properly if pci_set_consistent_dma_mask() fails\n  IB/qib: Allow driver to load if PCIe AER fails\n  IB/qib: Fix uninitialized pointer if CONFIG_PCI_MSI not set\n  IB/qib: Fix extra log level in qib_early_err()\n  RDMA/cxgb4: Remove unnecessary KERN_\u003clevel\u003e use\n  RDMA/cxgb3: Remove unnecessary KERN_\u003clevel\u003e use\n  IB/core: Add link layer type information to sysfs\n  IB/mlx4: Add VLAN support for IBoE\n  IB/core: Add VLAN support for IBoE\n  IB/mlx4: Add support for IBoE\n  mlx4_en: Change multicast promiscuous mode to support IBoE\n  mlx4_core: Update data structures and constants for IBoE\n  mlx4_core: Allow protocol drivers to find corresponding interfaces\n  IB/uverbs: Return link layer type to userspace for query port operation\n  IB/srp: Sync buffer before posting send\n  IB/srp: Use list_first_entry()\n  IB/srp: Reduce number of BUSY conditions\n  IB/srp: Eliminate two forward declarations\n  IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144\n  IB: Replace EXTRA_CFLAGS with ccflags-y\n  ...\n"
    },
    {
      "commit": "116e9535fe5e00bafab7a637f306b110cf95cff5",
      "tree": "59ab246aae5c0fc871434a50ad1eb42fce0af0b4",
      "parents": [
        "fc4ec9bd82dbe08499d801f45a1d49e4c7b66b20",
        "97cb7e40c69618ba03030b467faf60dc3ee982ee",
        "ca7cf94f8bf77bf0dfb35b615d82ac76a0ed77ff",
        "aa1ad26089a90d5b7e2c908835ba6dc930eed019",
        "625fbd3a36d836efaaee4b6d9c2fcd25e3654624",
        "8ad330a002ffbc422f32a77398666832f0df8a3d",
        "c3aa9b186b95025d4ba4e90d6140c9887dfaae0a",
        "7454159d3c01371c1abed9d941044d95d2efde97",
        "d0d68b8693bd16bfbbc93b89f1d9f3351723307c",
        "52106bd24c8d5e8a26b98ad93a755b0827029860",
        "2ca78d23a758d3299abd128556debff4c1fefb16",
        "19081f31ce941a22bfc681d18ae2d31e31084df5"
      ],
      "author": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Tue Oct 26 16:09:11 2010 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Tue Oct 26 16:09:11 2010 -0700"
      },
      "message": "Merge branches \u0027amso1100\u0027, \u0027cma\u0027, \u0027cxgb3\u0027, \u0027cxgb4\u0027, \u0027ehca\u0027, \u0027iboe\u0027, \u0027ipoib\u0027, \u0027misc\u0027, \u0027mlx4\u0027, \u0027nes\u0027, \u0027qib\u0027 and \u0027srp\u0027 into for-next\n"
    },
    {
      "commit": "4c3eb3ca13966508bcb64f39dcdef48be22f1731",
      "tree": "67fde746d256e38421c682501974868971507680",
      "parents": [
        "af7bd463761c6abd8ca8d831f9cc0ac19f3b7d4b"
      ],
      "author": {
        "name": "Eli Cohen",
        "email": "eli@dev.mellanox.co.il",
        "time": "Thu Aug 26 17:19:22 2010 +0300"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Mon Oct 25 10:20:39 2010 -0700"
      },
      "message": "IB/mlx4: Add VLAN support for IBoE\n\nThis patch allows IBoE traffic to be encapsulated in 802.1Q tagged\nVLAN frames.  The VLAN tag is encoded in the GID and derived from it\nby a simple computation.\n\nThe netdev notifier callback is modified to catch VLAN device\naddition/removal and the port\u0027s GID table is updated to reflect the\nchange, so that for each netdevice there is an entry in the GID table.\nWhen the port\u0027s GID table is exhausted, GID entries will not be added.\nOnly children of the main interfaces can add to the GID table; if a\nVLAN interface is added on another VLAN interface (e.g. \"vconfig add\neth2.6 8\"), then that interfaces will not add an entry to the GID\ntable.\n\nSigned-off-by: Eli Cohen \u003celi@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "fa417f7b520ee60b39f7e23528d2030af30a07d1",
      "tree": "8eca6ed53c985616e990b57b99a21714ed011534",
      "parents": [
        "7ac870ed7d2316587ec06747c28cb9f44f67997d"
      ],
      "author": {
        "name": "Eli Cohen",
        "email": "eli@mellanox.co.il",
        "time": "Sun Oct 24 21:08:52 2010 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Mon Oct 25 10:20:39 2010 -0700"
      },
      "message": "IB/mlx4: Add support for IBoE\n\nAdd support for IBoE to mlx4_ib.  The bulk of the code is handling the\nnew address vector fields; mlx4 needs the MAC address of a remote node\nto include it in a WQE (for datagrams) or in the QP context (for\nconnected QPs).  Address resolution is done by assuming all unicast\nGIDs are either link-local IPv6 addresses.\n\nMulticast group attach/detach needs to update the NIC\u0027s multicast\nfilters; but since attaching a QP to a multicast group can be done\nbefore the QP is bound to a port, for IBoE we need to keep track of\nall multicast groups that a QP is attached too before it transitions\nfrom INIT to RTR (since it does not have a port in the INIT state).\n\nSigned-off-by: Eli Cohen \u003celi@mellanox.co.il\u003e\n\n[ Many things cleaned up and otherwise monkeyed with; hope I didn\u0027t\n  introduce too many bugs.  - Roland ]\n\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "96dfa684c85d24b697f865f37a4f0c8678fc86e9",
      "tree": "554d13942b25385e9fa053de0991a2ef8e68e1be",
      "parents": [
        "33c87f0af60146b375220809c1cb745ac1a86edf"
      ],
      "author": {
        "name": "Eli Cohen",
        "email": "eli@mellanox.co.il",
        "time": "Wed Oct 20 21:57:02 2010 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Mon Oct 25 10:20:39 2010 -0700"
      },
      "message": "mlx4_core: Update data structures and constants for IBoE\n\nAdd fields to hardware data structures and add new constants required for IBoE\nsupport.\n\nSigned-off-by: Eli Cohen \u003celi@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n\n"
    },
    {
      "commit": "33c87f0af60146b375220809c1cb745ac1a86edf",
      "tree": "f22e0a1f8fbe6b05f2f15c517d3b8e9b77581662",
      "parents": [
        "2420b60b1dc4ed98cb1788e928bc57ff2efa1a8d"
      ],
      "author": {
        "name": "Eli Cohen",
        "email": "eli@dev.mellanox.co.il",
        "time": "Thu Aug 26 14:18:43 2010 +0000"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Mon Oct 25 10:20:39 2010 -0700"
      },
      "message": "mlx4_core: Allow protocol drivers to find corresponding interfaces\n\nAdd a mechanism for mlx4 protocol drivers to get a pointer to other\ndrivers\u0027s device objects.  For this, an exported function,\nmlx4_get_protocol_dev() is added, which allows a driver to get some\nother driver\u0027s device based on the protocol that the driver\nimplements.  Two protocols are added: MLX4_PROTOCOL_IB and\nMLX4_PROTOCOL_EN.\n\nThis will be used in mlx4 IBoE support so that mlx4_ib can find the\ncorresponding mlx4_en netdev.\n\nSigned-off-by: Eli Cohen \u003celi@mellanox.co.il\u003e\n\n[ Clean up and rename a few things.  - Roland ]\n\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "d0d68b8693bd16bfbbc93b89f1d9f3351723307c",
      "tree": "805552db83354bff13841e523e502a0e689d1643",
      "parents": [
        "5a0fd09428e47fb08d5a887515d92bb2447f4b65"
      ],
      "author": {
        "name": "Jack Morgenstein",
        "email": "jackm@dev.mellanox.co.il",
        "time": "Mon Oct 04 12:11:34 2010 +0000"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Sat Oct 23 13:53:09 2010 -0700"
      },
      "message": "IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144\n\nThe Node Description cannot be changed via MADs (it is read-only).\nUntil now, it was changed in the driver via sysfs, and the new Node\nDescription was simply inserted by the driver into MAD responses\n(replacing the description returned by FW).\n\nSystem startup scripts use the sysfs interface to change the node\ndescription at driver startup to show the hostname, etc. However, this\nhas a race condition: the SM could discover the original FW node\ndescription rather than the system-specific description if it queried the\nport before the startup scripts finish running.\n\nFor mlx4, we fix this with a new FW command (SET_NODE) that allows\npassing the new node description to FW.  When this command is invoked,\nFW sends a trap 144 to the SM.  When it gets this trap, the SM can\nquery the node to obtain the new node description -- thus eliminating\nthe effects of the race.\n\nThis patch simply calls SET_NODE command when a new node description\nis entered via sysfs (thus causing trap 144 to be issued by the FW).\nWe ignore all failures of the SET_NODE command (including those caused\nby using a device FW that predates the SET_NODE command), since in\nthat case things work just as before.\n\nSigned-off-by: Jack Morgenstein \u003cjackm@dev.mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "5a0fd09428e47fb08d5a887515d92bb2447f4b65",
      "tree": "83a6642cb0dfd99dff733dde7b4c7aa40df2d920",
      "parents": [
        "0498628f974d4132ba34b06fc24786a00401b79c"
      ],
      "author": {
        "name": "Eli Cohen",
        "email": "eli@dev.mellanox.co.il",
        "time": "Thu Oct 07 16:24:16 2010 +0200"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Mon Oct 11 14:33:17 2010 -0700"
      },
      "message": "IB/mlx4: Limit size of fast registration WRs\n\nFix the limit on the size of max fast registration WRs that can be\nposted to match hardware capabilities.\n\nSigned-off-by: Eli Cohen \u003celi@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "0533943c5c45cce2e26432bf0a6b8e114757c897",
      "tree": "8405db10a70b0a2a9f4c04528e4bcffdbb7189c6",
      "parents": [
        "d7e1a487d31933deba742c1bd3ffe0f73220b729"
      ],
      "author": {
        "name": "Yevgeny Petrilin",
        "email": "yevgenyp@mellanox.co.il",
        "time": "Tue Aug 24 03:46:42 2010 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Tue Aug 24 14:57:09 2010 -0700"
      },
      "message": "mlx4_en: UDP RSS support\n\nAdding capability for RSS for UDP traffic, hashing is done based on\nIP addresses and UDP port number.\nThe support depends on HW/FW capabilities.\n\nSigned-off-by: Yevgeny Petrilin \u003cyevgenyp@mellanox.co.il\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "7699517db435fd24143bd32dd644275e3eeb4c86",
      "tree": "e39bad6758eb4172cd4bafe481803c8f752a2630",
      "parents": [
        "e7c1c2c46201e46f8ce817196507d2ffd3dafd8e"
      ],
      "author": {
        "name": "Yevgeny Petrilin",
        "email": "yevgenyp@mellanox.co.il",
        "time": "Tue Aug 24 03:46:23 2010 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Tue Aug 24 14:54:51 2010 -0700"
      },
      "message": "mlx4_en: Fixing report in Ethtool get_settings\n\nThe report now based on query from FW, giving the correct tranciever type\nand link speed.\n\nSigned-off-by: Yevgeny Petrilin \u003cyevgenyp@mellanox.co.il\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "e7c1c2c46201e46f8ce817196507d2ffd3dafd8e",
      "tree": "33579da64d2c5dc4502518496097dcf9737e9eb4",
      "parents": [
        "3005ad40b95168aad530f1179cff47411b3ea8da"
      ],
      "author": {
        "name": "Yevgeny Petrilin",
        "email": "yevgenyp@mellanox.co.il",
        "time": "Tue Aug 24 03:46:18 2010 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Tue Aug 24 14:54:51 2010 -0700"
      },
      "message": "mlx4_en: Added self diagnostics test implementation\n\nThe selftest includes 5 features:\n1. Interrupt test: Executing commands and receiving command completion\n   on all our interrupt vectors.\n2. Link test: Verifying we are connected to valid link partner.\n3. Speed test: Check that we negotiated link speed correctly.\n4. Registers test: Activate HW health check command.\n5. Loopback test: Send a packet on loopback interface and catch it on RX side.\n\nSigned-off-by: Yevgeny Petrilin \u003cyevgenyp@mellanox.co.il\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "6fa8f719844b8455033e295f720e739c1dc3804a",
      "tree": "f3080e38beb16b836ec5eb3ba6cb99dfc07316a0",
      "parents": [
        "5e80ba8ff0bd33ff4af2365969a231cbdb98cafb"
      ],
      "author": {
        "name": "Vladimir Sokolovsky",
        "email": "vlad@mellanox.co.il",
        "time": "Wed Apr 14 17:23:39 2010 +0300"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Apr 21 16:37:49 2010 -0700"
      },
      "message": "IB/mlx4: Add support for masked atomic operations\n\nAdd support for masked atomic operations (masked compare and swap,\nmasked fetch and add).\n\nSigned-off-by: Vladimir Sokolovsky \u003cvlad@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "417608c20a4c8397bc5307d949ec01ea0a0dd8e5",
      "tree": "9986edf24a8d52fdfc5f51b2cb50f56c4eeb0c6c",
      "parents": [
        "ecdc428e4c5d821a07baf4f8b1718faf67b9026f"
      ],
      "author": {
        "name": "Eli Cohen",
        "email": "eli@mellanox.co.il",
        "time": "Thu Nov 12 11:19:44 2009 -0800"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Thu Nov 12 11:19:44 2009 -0800"
      },
      "message": "IB/mlx4: Remove limitation on LSO header size\n\nCurrent code has a limitation: an LSO header is not allowed to cross a\n64 byte boundary.  This patch removes this limitation by setting the\nWQE RR for large headers thus allowing LSO headers of any size.  The\nextra buffer reserved for MLX4_IB_QP_LSO QPs has been doubled, from 64\nto 128 bytes, assuming this is reasonable upper limit for header\nlength.  Also, this patch will cause IB_DEVICE_UD_TSO to be set only\nfor HCA FW versions that set MLX4_DEV_CAP_FLAG_BLH; e.g. FW version\n2.6.000 and higher.\n\nSigned-off-by: Eli Cohen \u003celi@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "2ac6bf4ddc87c3b6b609f8fa82f6ebbffeac12f4",
      "tree": "7de468eac9f948f85faebb2f86efbfd66737d8d9",
      "parents": [
        "ab6bf42e2339580b5d87746d0ff4da4b1578b03e"
      ],
      "author": {
        "name": "Jack Morgenstein",
        "email": "jackm@dev.mellanox.co.il",
        "time": "Fri Jun 05 10:36:24 2009 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Fri Jun 05 10:36:24 2009 -0700"
      },
      "message": "IB/mlx4: Add strong ordering to local inval and fast reg work requests\n\nThe ConnectX Programmer\u0027s Reference Manual states that the \"SO\" bit\nmust be set when posting Fast Register and Local Invalidate send work\nrequests.  When this bit is set, the work request will be executed\nonly after all previous work requests on the send queue have been\nexecuted.  (If the bit is not set, Fast Register and Local Invalidate\nWQEs may begin execution too early, which violates the defined\nsemantics for these operations)\n\nThis fixes the issue with NFS/RDMA reported in\n\u003chttp://lists.openfabrics.org/pipermail/general/2009-April/059253.html\u003e\n\nSigned-off-by: Jack Morgenstein \u003cjackm@dev.mellanox.co.il\u003e\nCc: \u003cstable@kernel.org\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "ab6bf42e2339580b5d87746d0ff4da4b1578b03e",
      "tree": "670b1e1168e2a89ad782879154c9cdc9785b1c4c",
      "parents": [
        "210af919c949a7d6bd330916ef376cec2907d81e"
      ],
      "author": {
        "name": "Eli Cohen",
        "email": "eli@mellanox.co.il",
        "time": "Wed May 27 14:38:34 2009 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed May 27 14:38:34 2009 -0700"
      },
      "message": "mlx4_core: Add module parameter for number of MTTs per segment\n\nThe current MTT allocator uses kmalloc() to allocate a buffer for its\nbuddy allocator, and thus is limited in the amount of MTT segments\nthat it can control.  As a result, the size of memory that can be\nregistered is limited too.  This patch uses a module parameter to\ncontrol the number of MTT entries that each segment represents,\nallowing more memory to be registered with the same number of\nsegments.\n\nSigned-off-by: Eli Cohen \u003celi@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "27bf91d6a0d5a9c7224e8687754249bba67dd4cf",
      "tree": "55c253fa4438ea29d73f072a88dff5fb74e2ca4e",
      "parents": [
        "793730bfb6711d6d14629e63845c25a3c14d205e"
      ],
      "author": {
        "name": "Yevgeny Petrilin",
        "email": "yevgenyp@mellanox.co.il",
        "time": "Wed Mar 18 19:45:11 2009 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Mar 18 19:45:11 2009 -0700"
      },
      "message": "mlx4_core: Add link type autosensing\n\nWhen a port\u0027s link is down (except to driver restart) and the port is\nconfigured for auto sensing, we try to sense port link type (Ethernet\nor InfiniBand) in order to determine how to initialize the port.  If\nthe port type needs to be changed, all mlx4 for the device interfaces\nare unregistered and then registered again with the new port\ntypes.  Sensing is done with intervals of 3 seconds.\n\nSigned-off-by: Yevgeny Petrilin \u003cyevgenyp@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "b8dd786f9417e5885929bfe33a235c76a9c1c569",
      "tree": "16b38c672980d142ffa0ac0ccdeb4af19c20cc31",
      "parents": [
        "061e41fdb5047b1fb161e89664057835935ca1d2"
      ],
      "author": {
        "name": "Yevgeny Petrilin",
        "email": "yevgenyp@mellanox.co.il",
        "time": "Mon Dec 22 07:15:03 2008 -0800"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Mon Dec 22 07:15:03 2008 -0800"
      },
      "message": "mlx4_core: Add support for multiple completion event vectors\n\nWhen using MSI-X mode, create a completion event queue for each CPU.\nReport the number of completion EQs in a new struct mlx4_caps member,\nnum_comp_vectors, and extend the mlx4_cq_alloc() interface with a\nvector parameter so that consumers can specify which completion EQ\nshould be used to report events for the CQ being created.\n\nSigned-off-by: Yevgeny Petrilin \u003cyevgenyp@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "9a5aa622dd4cd22b5e0fe83e4a9c0c768d4e2dea",
      "tree": "95e975a4959a890bd1050645b04488272aa4643c",
      "parents": [
        "4ffaf869c7780bbdfc11291e5fd4b61dde662b1c"
      ],
      "author": {
        "name": "Jack Morgenstein",
        "email": "jackm@dev.mellanox.co.il",
        "time": "Fri Nov 28 21:29:46 2008 -0800"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Fri Nov 28 21:29:46 2008 -0800"
      },
      "message": "mlx4_core: Save/restore default port IB capability mask\n\nCommit 7ff93f8b (\"mlx4_core: Multiple port type support\") introduced\nsupport for different port types.  As part of that support, SET_PORT\nis invoked to set the port type during driver startup.  However, as a\nside-effect, for IB ports the invocation of this command also sets the\nport\u0027s capability mask to zero (losing the default value set by FW).\n\nTo fix this, get the default ib port capabilities (via a MAD_IFC Port\nInfo query) during driver startup, and save them for use in the\nmlx4_SET_PORT command when setting the port-type to Infiniband.\n\nThis patch fixes problems with subnet manager (SM) failover such as\n\u003chttps://bugs.openfabrics.org/show_bug.cgi?id\u003d1183\u003e, which occurred\nbecause the IsTrapSupported bit in the capability mask was zeroed.\n\nSigned-off-by: Jack Morgenstein \u003cjackm@dev.mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "7ff93f8b7ecbc36e7ffc5c11a61643821c1bfee5",
      "tree": "4b38e1ead8b27a480cc766f6927dccf5b63793ae",
      "parents": [
        "2a2336f8228292b8197f4187e54b0748903e6645"
      ],
      "author": {
        "name": "Yevgeny Petrilin",
        "email": "yevgenyp@mellanox.co.il",
        "time": "Wed Oct 22 15:38:42 2008 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Oct 22 15:38:42 2008 -0700"
      },
      "message": "mlx4_core: Multiple port type support\n\nMulti-protocol adapters support different port types.  Each consumer\nof mlx4_core queries for supported port types; in particular mlx4_ib\ncan no longer assume that all physical ports belong to it.  Port type\nis configured through a sysfs interface.  When the type of a port is\nchanged, all mlx4 interfaces are unregistered, and then registered\nagain with the new port types.\n\nSigned-off-by: Yevgeny Petrilin \u003cyevgenyp@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "2a2336f8228292b8197f4187e54b0748903e6645",
      "tree": "8c54c6d594a055bb5e0a83b2c9c8c2f6fcc03d22",
      "parents": [
        "b79acb49de6c2ab9ff0245f0f2b573d48b9a2d93"
      ],
      "author": {
        "name": "Yevgeny Petrilin",
        "email": "yevgenyp@mellanox.co.il",
        "time": "Wed Oct 22 11:44:46 2008 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Oct 22 11:44:46 2008 -0700"
      },
      "message": "mlx4_core: Ethernet MAC/VLAN management\n\nAdd support for managing MAC and VLAN filters for each port.\n\nSigned-off-by: Yevgeny Petrilin \u003cyevgenyp@mellanox.co.il\u003e\nSigned-off-by: Oren Duer \u003coren@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "b79acb49de6c2ab9ff0245f0f2b573d48b9a2d93",
      "tree": "59e824371b2ba25b2806a6077ef26a767d2e35ae",
      "parents": [
        "93fc9e1bb6507dde945c2eab68c93e1066ac3691"
      ],
      "author": {
        "name": "Yevgeny Petrilin",
        "email": "yevgenyp@mellanox.co.il",
        "time": "Wed Oct 22 10:56:48 2008 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Oct 22 10:56:48 2008 -0700"
      },
      "message": "mlx4_core: Get ethernet MTU and default address from firmware\n\nGet maximum ethernet MTU and default MAC address from the firmware\nQUERY_DEV_CAP command.\n\nSigned-off-by: Yevgeny Petrilin \u003cyevgenyp@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "93fc9e1bb6507dde945c2eab68c93e1066ac3691",
      "tree": "aa495ec31b7372580f9ec50acead1d170fd70aab",
      "parents": [
        "a3cdcbfa8fb1fccfe48d359da86e99546610c562"
      ],
      "author": {
        "name": "Yevgeny Petrilin",
        "email": "yevgenyp@mellanox.co.il",
        "time": "Wed Oct 22 10:25:29 2008 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Oct 22 10:25:29 2008 -0700"
      },
      "message": "mlx4_core: Support multiple pre-reserved QP regions\n\nFor ethernet support, we need to reserve QPs for the ethernet and\nfibre channel driver.  The QPs are reserved at the end of the QP\ntable.  (This way we assure that they are aligned to their size)\n\nWe need to consider these reserved ranges in bitmap creation, so we\nextend the mlx4 bitmap utility functions to allow reserved ranges at\nboth the bottom and the top of the range.\n\nSigned-off-by: Yevgeny Petrilin \u003cyevgenyp@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "a3cdcbfa8fb1fccfe48d359da86e99546610c562",
      "tree": "a25715b6e9169568c53f80dc9333e024f389b383",
      "parents": [
        "f6bccf695431da0e9bd773550ae91b8cb9ffb227"
      ],
      "author": {
        "name": "Yevgeny Petrilin",
        "email": "yevgenyp@mellanox.co.il",
        "time": "Fri Oct 10 12:01:37 2008 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Fri Oct 10 12:01:37 2008 -0700"
      },
      "message": "mlx4_core: Add QP range reservation support\n\nTo allow allocating an aligned range of consecutive QP numbers, add an\ninterface to reserve an aligned range of QP numbers and have the QP\nallocation function always take a QP number.\n\nThis will be used for RSS support in the mlx4_en Ethernet driver and\nalso potentially by IPoIB RSS support.\n\nSigned-off-by: Yevgeny Petrilin \u003cyevgenyp@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "29bdc88384c2b24e37e5760df0dc898546083d6b",
      "tree": "9d8fe16ac4728ab669f81a763effda21301d9ddf",
      "parents": [
        "c9257433f2eaf8803a1f3d3be5d984232db41ffe"
      ],
      "author": {
        "name": "Vladimir Sokolovsky",
        "email": "vlad@mellanox.co.il",
        "time": "Mon Sep 15 14:25:23 2008 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Mon Sep 15 14:25:23 2008 -0700"
      },
      "message": "IB/mlx4: Fix up fast register page list format\n\nByte swap the addresses in the page list for fast register work requests\nto big endian to match what the HCA expectx.  Also, the addresses must\nhave the \"present\" bit set so that the HCA knows it can access them.\nOtherwise the HCA will fault the first time it accesses the memory\nregion.\n\nSigned-off-by: Vladimir Sokolovsky \u003cvlad@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "f780a9f119caa48088b230836a7fa73d1096de7c",
      "tree": "513fb3aa4342a481aa1f4101675ea2e9c41bc28a",
      "parents": [
        "6e86841d05f371b5b9b86ce76c02aaee83352298"
      ],
      "author": {
        "name": "Yevgeny Petrilin",
        "email": "yevgenyp@mellanox.co.il",
        "time": "Wed Aug 06 20:14:06 2008 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Aug 06 20:14:06 2008 -0700"
      },
      "message": "mlx4_core: Add ethernet fields to CQE struct\n\nAdd ethernet-related fields to struct mlx4_cqe so that the mlx4_en\nethernet NIC driver can share the same definition.\n\nSigned-off-by: Yevgeny Petrilin \u003cyevgenyp@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "25c94d010a8ae8605dc4d5453e0c82fa97da5d12",
      "tree": "ff63c2a3dd771040aa3d13fe609fb95e838e2468",
      "parents": [
        "fb2e405fc1fc8b20d9c78eaa1c7fd5a297efde43"
      ],
      "author": {
        "name": "Yevgeny Petrilin",
        "email": "yevgenyp@mellanox.co.il",
        "time": "Fri Jul 25 10:30:06 2008 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Fri Jul 25 10:30:06 2008 -0700"
      },
      "message": "mlx4_core: Add VLAN tag field to WQE control segment struct\n\nAdd fields for VLAN tag and insert VLAN tag flag to the control\nsection struct.  These fields will be used for sending ethernet\npackets.\n\nSigned-off-by: Yevgeny Petrilin \u003cyevgenyp@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "95d04f0735b4fc837bff9aedcc3f3efb20ddc3d1",
      "tree": "900cd7debae9827c3e20f5199307ae27e83ba862",
      "parents": [
        "e4044cfc493338cd09870bd45dc646336bb66e9f"
      ],
      "author": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Jul 23 08:12:26 2008 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Jul 23 08:12:26 2008 -0700"
      },
      "message": "IB/mlx4: Add support for memory management extensions and local DMA L_Key\n\nAdd support for the following operations to mlx4 when device firmware\nsupports them:\n\n - Send with invalidate and local invalidate send queue work requests;\n - Allocate/free fast register MRs;\n - Allocate/free fast register MR page lists;\n - Fast register MR send queue work requests;\n - Local DMA L_Key.\n\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "47b374752aed1c029f995473c7c463ee3ae5fbaa",
      "tree": "ce6dfb09d0e0f359b49e31e70bbfe3a599beebb2",
      "parents": [
        "51f5f0ee22b98980f7816d42647467cd5f4b3b45"
      ],
      "author": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Tue Jul 22 14:19:39 2008 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Tue Jul 22 14:19:39 2008 -0700"
      },
      "message": "IB/mlx4: Rename struct mlx4_lso_seg to mlx4_wqe_lso_seg\n\nMake the struct name consistent with other WQE segment struct types\ndefined in \u003clinux/mlx4/qp.h\u003e.\n\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "521e575b9a7324a0bca762622139f69582a042bf",
      "tree": "5962695835c6d11b424d76c64421ebd436b52a34",
      "parents": [
        "47ee1b9f2e7bf73950602efe0b74fa1a8481f222"
      ],
      "author": {
        "name": "Ron Livne",
        "email": "ronli@voltaire.com",
        "time": "Mon Jul 14 23:48:48 2008 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Mon Jul 14 23:48:48 2008 -0700"
      },
      "message": "IB/mlx4: Add support for blocking multicast loopback packets\n\nAdd support for handling the IB_QP_CREATE_MULTICAST_BLOCK_LOOPBACK\nflag by using the per-multicast group loopback blocking feature of\nmlx4 hardware.\n\nSigned-off-by: Ron Livne \u003cronli@voltaire.com\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "e463c7b197dbe64b8a99b0612c65f286937e5bf1",
      "tree": "aadd360d04b9cdf7eaf7d4eed1f79bd29a3b12df",
      "parents": [
        "7663c1e2792a9662b23dec6e19bfcd3d55360b8f"
      ],
      "author": {
        "name": "Yevgeny Petrilin",
        "email": "yevgenyp@mellanox.co.il",
        "time": "Tue Apr 29 13:46:50 2008 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Tue Apr 29 13:46:50 2008 -0700"
      },
      "message": "mlx4_core: Add a way to set the \"collapsed\" CQ flag\n\nExtend the mlx4_cq_resize() API with a way to set the \"collapsed\" flag\nfor the CQ being created.\n\nSigned-off-by: Yevgeny Petrilin \u003cyevgenyp@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "ed4d3c1061d6f367a4ef5e1656c25af3314fe2b7",
      "tree": "93e627fa3d8f7b439625ffec5ccd390d100d67a1",
      "parents": [
        "38ae6a535470b959df67ded6798fc542bb212e19"
      ],
      "author": {
        "name": "Yevgeny Petrilin",
        "email": "yevgenyp@mellanox.co.il",
        "time": "Fri Apr 25 14:52:32 2008 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Fri Apr 25 14:52:32 2008 -0700"
      },
      "message": "mlx4_core: Add helper to move QP to ready-to-send\n\nAvoid duplicating code in ethernet and FC modules.\n\nSigned-off-by: Yevgeny Petrilin \u003cyevgenyp@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "38ae6a535470b959df67ded6798fc542bb212e19",
      "tree": "35ee1d5450f0b0f491764ebd22babceb9cbf8f1d",
      "parents": [
        "31d1e340f0e8d53804d737571b2f2bb28a74ecc5"
      ],
      "author": {
        "name": "Yevgeny Petrilin",
        "email": "yevgenyp@mellanox.co.il",
        "time": "Fri Apr 25 14:27:08 2008 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Fri Apr 25 14:27:08 2008 -0700"
      },
      "message": "mlx4_core: Add HW queues allocation helpers\n\nWrap doorbell, buffer and MTT allocation in helper functions for\nethernet and FC modules to use.\n\nSigned-off-by: Yevgeny Petrilin \u003cyevgenyp@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "6296883ca4cd52dafb45f191d24102e28ded38f2",
      "tree": "341e90a9560d8cf6b498d249a6ac81aeea97dd7b",
      "parents": [
        "14fb05b3497351fbeb514381bcd227d84e115bd9"
      ],
      "author": {
        "name": "Yevgeny Petrilin",
        "email": "yevgenyp@mellanox.co.il",
        "time": "Wed Apr 23 11:55:45 2008 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Apr 23 11:55:45 2008 -0700"
      },
      "message": "mlx4_core: Move kernel doorbell management into core\n\nIn addition to mlx4_ib, there will be ethernet and FC consumers of\nmlx4_core, so move the code for managing kernel doorbells into the\ncore module to avoid having to duplicate this multiple times.\n\nSigned-off-by: Yevgeny Petrilin \u003cyevgenyp@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "bbf8eed1a0f8949f7385146624f736f829992a70",
      "tree": "5cf6a5c76ca4c038d3ca0f53abc5f2976872696b",
      "parents": [
        "3fdcb97f0b8d8a29117dc36acd0b15965d2a2160"
      ],
      "author": {
        "name": "Vladimir Sokolovsky",
        "email": "vlad@dev.mellanox.co.il",
        "time": "Wed Apr 16 21:09:33 2008 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Apr 16 21:09:33 2008 -0700"
      },
      "message": "IB/mlx4: Add support for resizing CQs\n\nSigned-off-by: Vladimir Sokolovsky \u003cvlad@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "3fdcb97f0b8d8a29117dc36acd0b15965d2a2160",
      "tree": "a8bad6e48e9654f10e1b8ebfde3b086d83d2756e",
      "parents": [
        "28d52b3cd8d48ef0ff77d4a8a7a21fc2816bb0a5"
      ],
      "author": {
        "name": "Eli Cohen",
        "email": "eli@dev.mellanox.co.il",
        "time": "Wed Apr 16 21:09:33 2008 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Apr 16 21:09:33 2008 -0700"
      },
      "message": "IB/mlx4: Add support for modifying CQ moderation parameters\n\nSigned-off-by: Eli Cohen \u003celi@mellnaox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "b832be1e4007f4a54954ec68bd865ff05d6babca",
      "tree": "f8780fb17293a5b02cd21fed468e1270daac91d8",
      "parents": [
        "40ca1988e03c001747d0b4cc1b25cf38297c9f9e"
      ],
      "author": {
        "name": "Eli Cohen",
        "email": "eli@dev.mellanox.co.il",
        "time": "Wed Apr 16 21:09:27 2008 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Apr 16 21:09:27 2008 -0700"
      },
      "message": "IB/mlx4: Add IPoIB LSO support\n\nAdd TSO support to the mlx4_ib driver.\n\nSigned-off-by: Eli Cohen \u003celi@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "8ff095ec4bce7be943beff3b330562e2f0e42167",
      "tree": "d0643b575033a033a072c2c0687be7e57d183d99",
      "parents": [
        "6046136c742e32d5e6431cdcd8957638d1816821"
      ],
      "author": {
        "name": "Eli Cohen",
        "email": "eli@dev.mellanox.co.il",
        "time": "Wed Apr 16 21:01:10 2008 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Apr 16 21:01:10 2008 -0700"
      },
      "message": "IB/mlx4: Add IPoIB checksum offload support\n\nConnectX devices support checksum generation and verification of TCP\nand UDP packets for UD IPoIB messages.  This patch checks if the HCA\nsupports this and sets the IB_DEVICE_UD_IP_CSUM capability flag if it\ndoes.  It implements support for handling the IB_SEND_IP_CSUM send\nflag and setting the csum_ok field in receive work completions.\n\nSigned-off-by: Eli Cohen \u003celi@mellanox.co.il\u003e\nSigned-off-by: Ali Ayub \u003cali@mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "37608eea86a358ac6a18df0af55d4f77d08a1f30",
      "tree": "bb0d7c9a93763e6b3fda744a08b2a0c6ed80dfec",
      "parents": [
        "26c4fc26d0af9b16a6a234318d15ee0b3896a63d"
      ],
      "author": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Apr 16 21:01:08 2008 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Apr 16 21:01:08 2008 -0700"
      },
      "message": "mlx4_core: Fix confusion between mlx4_event and mlx4_dev_event enums\n\nThe struct mlx4_interface.event() method was supposed to get an enum\nmlx4_dev_event, but the driver code was actually passing in the\nhardware enum mlx4_event values.  Fix up the callers of\nmlx4_dispatch_event() so that they pass in the right type of value,\nand fix up the event method in mlx4_ib so that it can handle the enum\nmlx4_dev_event values.\n\nThis eliminates the need for the subtype parameter to the event\nmethod, so remove it.\n\nThis also fixes the sparse warning\n\n    drivers/net/mlx4/intf.c:127:48: warning: mixing different enum types\n    drivers/net/mlx4/intf.c:127:48:     int enum mlx4_event  versus\n    drivers/net/mlx4/intf.c:127:48:     int enum mlx4_dev_event\n\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "ea54b10c7773007e173da31fe7adcc049da33331",
      "tree": "b13b77fb3807071a5b93ece7b564f6748d962bbc",
      "parents": [
        "b57aacfa7a95328f469d0360e49289b023c47e9e"
      ],
      "author": {
        "name": "Jack Morgenstein",
        "email": "jackm@dev.mellanox.co.il",
        "time": "Mon Jan 28 10:40:59 2008 +0200"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Fri Feb 08 13:30:02 2008 -0800"
      },
      "message": "IB/mlx4: Use multiple WQ blocks to post smaller send WQEs\n\nConnectX HCA supports shrinking WQEs, so that a single work request\ncan be made of multiple units of wqe_shift.  This way, WRs can differ\nin size, and do not have to be a power of 2 in size, saving memory and\nspeeding up send WR posting.  Unfortunately, if we do this then the\nwqe_index field in CQEs can\u0027t be used to look up the WR ID anymore, so\nour implementation does this only if selective signaling is off.\n\nFurther, on 32-bit platforms, we can\u0027t use vmap() to make the QP\nbuffer virtually contigious. Thus we have to use constant-sized WRs to\nmake sure a WR is always fully within a single page-sized chunk.\n\nFinally, we use WRs with the NOP opcode to avoid wrapping around the\nqueue buffer in the middle of posting a WR, and we set the\nNoErrorCompletion bit to avoid getting completions with error for NOP\nWRs.  However, NEC is only supported starting with firmware 2.2.232,\nso we use constant-sized WRs for older firmware.  And, since MLX QPs\nonly support SEND, we use constant-sized WRs in this case.\n\nWhen stamping during NOP posting, do stamping following setting of the\nNOP WQE valid bit.\n\nSigned-off-by: Michael S. Tsirkin \u003cmst@dev.mellanox.co.il\u003e\nSigned-off-by: Jack Morgenstein \u003cjackm@dev.mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "b57aacfa7a95328f469d0360e49289b023c47e9e",
      "tree": "5642416e92540b93ffb1221ae75b3f1f43ffcd7b",
      "parents": [
        "313abe55a87bc10e55d00f337d609e17ad5f8c9a"
      ],
      "author": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Feb 06 21:17:59 2008 -0800"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Feb 06 21:17:59 2008 -0800"
      },
      "message": "mlx4_core: Clean up struct mlx4_buf\n\nNow that struct mlx4_buf.u is a struct instead of a union because of\nthe vmap() changes, there\u0027s no point in having a struct at all.  So\nmove .direct and .page_list directly into struct mlx4_buf and get rid\nof a bunch of unnecessary \".u\"s.\n\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "313abe55a87bc10e55d00f337d609e17ad5f8c9a",
      "tree": "833ff3c4b33f83d4ca64ed322c2d8efa21529d71",
      "parents": [
        "1c69fc2a9012e160c8d459f63df74a6b01db8322"
      ],
      "author": {
        "name": "Jack Morgenstein",
        "email": "jackm@dev.mellanox.co.il",
        "time": "Mon Jan 28 10:40:51 2008 +0200"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Feb 06 21:17:45 2008 -0800"
      },
      "message": "mlx4_core: For 64-bit systems, vmap() kernel queue buffers\n\nSince kernel virtual memory is not a problem on 64-bit systems, there\nis no reason to use our own 2-layer page mapping scheme for large\nkernel queue buffers on such systems.  Instead, map the page list to a\nsingle virtually contiguous buffer with vmap(), so that can we access\nbuffer memory via direct indexing.\n\nSigned-off-by: Michael S. Tsirkin \u003cmst@dev.mellanox.co.il\u003e\nSigned-off-by: Jack Morgenstein \u003cjackm@dev.mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "1c69fc2a9012e160c8d459f63df74a6b01db8322",
      "tree": "a32a2be6b2c8b9f5c4e006bacebc1eeb723e2ff5",
      "parents": [
        "21511abd0a248a3f225d3b611cfabb93124605a7"
      ],
      "author": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Feb 06 21:07:54 2008 -0800"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Wed Feb 06 21:07:54 2008 -0800"
      },
      "message": "IB/mlx4: Consolidate code to get an entry from a struct mlx4_buf\n\nWe use struct mlx4_buf for kernel QP, CQ and SRQ buffers, and the code\nto look up an entry is duplicated in get_cqe_from_buf() and the QP and\nSRQ versions of get_wqe().  Factor this out into mlx4_buf_offset().\n\nThis will also make it easier to switch over to using vmap() for buffers.\n\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "744ea922c901b6557bffe8bff7af1ef18181f370",
      "tree": "f2fa2a3082726c31b96ec920d14ba77b2c626066",
      "parents": [
        "4fa435018d740cb83d74c92306aa1f796da91ddd"
      ],
      "author": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Sun Oct 14 20:17:39 2007 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Sun Oct 14 20:17:39 2007 -0700"
      },
      "message": "mlx4_core: Kill mlx4_write64_raw()\n    \nIt\u0027s a leftover from development that\u0027s never used in the real driver.\n\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "8ad11fb6b0739e704953e2b0aed453bf7d75d4f6",
      "tree": "671838bc9293987efba214f2d645d7e40befc5a8",
      "parents": [
        "d7bb58fb1c0e7264a7261c7d0304121ef9402e94"
      ],
      "author": {
        "name": "Jack Morgenstein",
        "email": "jackm@dev.mellanox.co.il",
        "time": "Wed Aug 01 12:29:05 2007 +0300"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Tue Oct 09 19:59:16 2007 -0700"
      },
      "message": "IB/mlx4: Implement FMRs\n\nImplement FMRs for mlx4.  This is an adaptation of code from mthca.\n\nSigned-off-by: Jack Morgenstein \u003cjackm@dev.mellanox.co.il\u003e\nSigned-off-by: Michael S. Tsirkin \u003cmst@dev.mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "cd9281d873c91a01af0cb96ff0f75e9905e54403",
      "tree": "a639777f03924198a0c91c8884406e8ba8e40efd",
      "parents": [
        "57cb61d587e990d556385d367589ff61f6c2c0f2"
      ],
      "author": {
        "name": "Jack Morgenstein",
        "email": "jackm@dev.mellanox.co.il",
        "time": "Tue Sep 18 09:14:18 2007 +0200"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Tue Oct 09 19:59:14 2007 -0700"
      },
      "message": "IB/mlx4:  Display misc device information under /sys/class/infiniband/\n\ndisplay the following device information under /sys/class/infiniband/mlx4_X:\nboard_id, fw_ver, hw_rev, hca_type.\n\nThis patch makes this information available to userspace utilities\nsuch as ibstat and ibv_devinfo.\n\nSigned-off-by: Jack Morgenstein \u003cjackm@dev.mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "65541cb7cf353946ecd78016a453b453b8830656",
      "tree": "0a93ed27fdb6caf3f90250eaaf179b560e6742f3",
      "parents": [
        "6a775e2ba4f7635849ade628e64723ab2beef0bc"
      ],
      "author": {
        "name": "Jack Morgenstein",
        "email": "jackm@dev.mellanox.co.il",
        "time": "Thu Jun 21 13:03:11 2007 +0300"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Thu Jul 12 15:41:24 2007 -0700"
      },
      "message": "IB/mlx4: Implement query SRQ\n\nSigned-off-by: Dotan Barak \u003cdotanb@mellanox.co.il\u003e\nSigned-off-by: Jack Morgenstein \u003cjackm@dev.mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "6a775e2ba4f7635849ade628e64723ab2beef0bc",
      "tree": "3c80d06d5f2f7135c81dddc2dcd6e536f9ecf22d",
      "parents": [
        "6164c8cd1333403a28202f7c7e64ff9086d8f1aa"
      ],
      "author": {
        "name": "Jack Morgenstein",
        "email": "jackm@dev.mellanox.co.il",
        "time": "Thu Jun 21 12:27:47 2007 +0300"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Thu Jul 12 15:41:00 2007 -0700"
      },
      "message": "IB/mlx4: Implement query QP\n\nSigned-off-by: Jack Morgenstein \u003cjackm@dev.mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "149983af609e8f5c57157467baf8545d17b8a6a1",
      "tree": "4a8ea99e670a6e74b7b03122408a82d4c6e29518",
      "parents": [
        "87427da55bc03dbce7906a5b09ed50279d654d28"
      ],
      "author": {
        "name": "Dotan Barak",
        "email": "dotanb@dev.mellanox.co.il",
        "time": "Tue Jun 26 15:55:28 2007 +0300"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Mon Jul 09 20:12:26 2007 -0700"
      },
      "message": "mlx4_core: Get the maximum message size from reported device capabilities\n\nGet the maximum message size from the device capabilities returned\nfrom the QUERY_DEV_CAP firmware command, rather than hard-coding 2 GB.\n\nSigned-off-by: Dotan Barak \u003cdotanb@dev.mellanox.co.il\u003e\nSigned-off-by: Michael S. Tsirkin \u003cmst@dev.mellanox.co.il\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n\n"
    },
    {
      "commit": "e61ef2416b0b92828512b6cfcd0104a02b6431fe",
      "tree": "51d3307aa5be5591f5859f96a3bd1dd20231b9b0",
      "parents": [
        "5ae2a7a836be660ff1621cce1c46930f19200589"
      ],
      "author": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Mon Jun 18 09:23:47 2007 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Mon Jun 18 09:23:47 2007 -0700"
      },
      "message": "IB/mlx4: Make sure inline data segments don\u0027t cross a 64 byte boundary\n\nInline data segments in send WQEs are not allowed to cross a 64 byte\nboundary.  We use inline data segments to hold the UD headers for MLX\nQPs (QP0 and QP1).  A send with GRH on QP1 will have a UD header that\nis too big to fit in a single inline data segment without crossing a\n64 byte boundary, so split the header into two inline data segments.\n\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "5ae2a7a836be660ff1621cce1c46930f19200589",
      "tree": "655b94b9a016cec92f319761afe6bb3000f5f4fa",
      "parents": [
        "082dee3216c99a838af40be403799f60bcea2e97"
      ],
      "author": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Mon Jun 18 08:15:02 2007 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Mon Jun 18 08:15:02 2007 -0700"
      },
      "message": "IB/mlx4: Handle FW command interface rev 3\n\nUpcoming firmware introduces command interface revision 3, which\nchanges the way port capabilities are queried and set.  Update the\ndriver to handle both the new and old command interfaces by adding a\nnew MLX4_FLAG_OLD_PORT_CMDS that it is set after querying the firmware\ninterface revision and then using the correct interface based on the\nsetting of the flag.\n\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    },
    {
      "commit": "225c7b1feef1b41170f7037a5b10a65cd8a42c54",
      "tree": "702a0a2cbba7f1c5b2949d236b4463d486204fdc",
      "parents": [
        "1bf66a30421ca772820f489d88c16d0c430d6a67"
      ],
      "author": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Tue May 08 18:00:38 2007 -0700"
      },
      "committer": {
        "name": "Roland Dreier",
        "email": "rolandd@cisco.com",
        "time": "Tue May 08 18:00:38 2007 -0700"
      },
      "message": "IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters\n\nAdd an InfiniBand driver for Mellanox ConnectX adapters.  Because\nthese adapters can also be used as ethernet NICs and Fibre Channel \nHBAs, the driver is split into two modules: \n \n  mlx4_core: Handles low-level things like device initialization and \n    processing firmware commands.  Also controls resource allocation \n    so that the InfiniBand, ethernet and FC functions can share a \n    device without stepping on each other. \n \n  mlx4_ib: Handles InfiniBand-specific things; plugs into the \n    InfiniBand midlayer. \n\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n"
    }
  ]
}