)]}' { "log": [ { "commit": "8ff19d42a104535a8a67a3fa8df39f72f23b2743", "tree": "e5e7671fee8dc880fc0b2baea67c320beeaf69b5", "parents": [ "4777a5ac5cfe6001027c3781808bfcc10c431d15" ], "author": { "name": "Mahesh Palivela", "email": "maheshp@posedge.com", "time": "Fri Jun 22 07:27:46 2012 +0000" }, "committer": { "name": "Sunil Dutt", "email": "duttus@codeaurora.org", "time": "Thu Feb 21 03:08:37 2013 +0530" }, "message": "wireless: add VHT (802.11ac) definitions\n\nAdd the VHT definitions to be used by drivers supporting it.\n\nChange-Id: Ia301cf72940cef19767f4f485a09c9afc12ae514\nCRs-fixed: 452921\n\nSigned-off-by: Mahesh Palivela \u003cmaheshp@posedge.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\n" }, { "commit": "4777a5ac5cfe6001027c3781808bfcc10c431d15", "tree": "042d7ba9511273ed25d82f47f6238c2b9de40c38", "parents": [ "641cd93eece1f8df49b7a40f50916e2b699bdc53", "c4eb8e54146cec56284bfe8ca1e643b1daca0b1e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Feb 20 03:31:43 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Feb 20 03:31:42 2013 -0800" }, "message": "Merge \"thermal: pm8xxx-tm: Add configuration option for allowing shutdown override\"" }, { "commit": "641cd93eece1f8df49b7a40f50916e2b699bdc53", "tree": "beb2d6daebd2c952e7933f4545764f7781e478aa", "parents": [ "e72b9073357f5a233288f8aeb55727caf795886b", "3aabeae171d49c1fabe97fc0eb4a6a48e0969531" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Feb 19 19:36:02 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Feb 19 19:36:01 2013 -0800" }, "message": "Merge \"ASoC: msm: avoid negative time stamp check\"" }, { "commit": "e72b9073357f5a233288f8aeb55727caf795886b", "tree": "190f8d49ae69871d3ea11294f4eafea30bfae7eb", "parents": [ "44958780eeb0de629acc5b88d93d280f13984898", "3e9d336ed987e1f91933ddf25283b9a7012d3f32" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Feb 19 19:36:00 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Feb 19 19:36:00 2013 -0800" }, "message": "Merge \"ASoC: msm: qdsp6: add check for maximum COPPs allowed\"" }, { "commit": "44958780eeb0de629acc5b88d93d280f13984898", "tree": "19454a4fbddb04c5162535aaaa63aca8ac9e70da", "parents": [ "4ed9f1a58f816d4189858d912aa6332c26b5131d", "e4b53dfae76290343abe73ccc1b079e58a2f74c0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Feb 19 19:35:59 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Feb 19 19:35:58 2013 -0800" }, "message": "Merge \"arm: mach-msm: qdsp6v2: remove unnecessary write count check\"" }, { "commit": "4ed9f1a58f816d4189858d912aa6332c26b5131d", "tree": "f956b6bc05931e3db34210aca2545223c9a97f26", "parents": [ "fbf62ccd13e86d11f18b335daef02dc1810953fb", "6d9fc60b499c8ceec2a947d714d6b1a565b85b8c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Feb 19 19:35:58 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Feb 19 19:35:57 2013 -0800" }, "message": "Merge \"ASoC: msm: qdsp6: avoid unnecessary check\"" }, { "commit": "fbf62ccd13e86d11f18b335daef02dc1810953fb", "tree": "aafd7d674ee26373e268e70718d632f4bb532f82", "parents": [ "de52e14f5d6b3135a224715c4068e8e108654b9a", "537218b1221f365bd57625856bdd8a991f923e48" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Feb 19 19:35:57 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Feb 19 19:35:56 2013 -0800" }, "message": "Merge \"arm: mach-msm: qdsp6v2: update dual mono setting check\"" }, { "commit": "de52e14f5d6b3135a224715c4068e8e108654b9a", "tree": "d87b5e03ef4379db9a2aeef62344e1cec69e6583", "parents": [ "28347c2d14388c5d7ab8731395058d7d4d53de5d", "f212b6ef9408862e06a85f5491a0de4d2394d744" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Feb 19 19:35:40 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Feb 19 19:35:39 2013 -0800" }, "message": "Merge \"Revert \"Bluetooth: Avoid re-authentication for secure high connections\"\"" }, { "commit": "28347c2d14388c5d7ab8731395058d7d4d53de5d", "tree": "7307a60323870cae66ab07691112cb066234d902", "parents": [ "a656edbe16e637e5bc66a1c0774d27929ac31a50", "2738eeccbc44aaed38fef732ad27060457956310" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Feb 19 19:35:39 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Feb 19 19:35:38 2013 -0800" }, "message": "Merge \"Bluetooth: Introduce new security level\"" }, { "commit": "a656edbe16e637e5bc66a1c0774d27929ac31a50", "tree": "0abeb673af0f97c1793442be6440b9e21dc45dec", "parents": [ "dfc7487ef53b85f2b263aec0f06f1e4741d67164", "b2451eac18f1eb5c062ecd866a62333492a3a7f1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Feb 19 13:01:38 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Feb 19 13:01:38 2013 -0800" }, "message": "Merge \"thermal: pm8xxx-tm: Use delayed_work task for temp alarm status reading\"" }, { "commit": "dfc7487ef53b85f2b263aec0f06f1e4741d67164", "tree": "21afcc421cb2638848c0d6c2af95d5c7d3d32112", "parents": [ "b08c5c785026c5a712d5f50535a9e422defef6ab", "b42b294f0cecc6c6bb2a84ca22df13af61b89345" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Feb 19 13:01:37 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Feb 19 13:01:37 2013 -0800" }, "message": "Merge \"thermal: pm8xxx-tm: Improve temp alarm logging and notification filtering\"" }, { "commit": "b08c5c785026c5a712d5f50535a9e422defef6ab", "tree": "aa9963bc1892029f24b336b297fec1821554976e", "parents": [ "cd905abd5af2a00e19672a56f7f7eea1ba4bad2b", "197c31ee17514df9d8349481e84ec31cdac55521" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Feb 19 13:01:37 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Feb 19 13:01:36 2013 -0800" }, "message": "Merge \"thermal: pm8xxx-tm: Modify userspace notification method\"" }, { "commit": "c4eb8e54146cec56284bfe8ca1e643b1daca0b1e", "tree": "36f31bc0550d30b05d697fee928cb2b06d5ce46a", "parents": [ "b2451eac18f1eb5c062ecd866a62333492a3a7f1" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Mon Sep 10 14:43:14 2012 -0700" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Feb 19 09:28:58 2013 -0800" }, "message": "thermal: pm8xxx-tm: Add configuration option for allowing shutdown override\n\nAdd a field to the PMIC thermal alarm core data named\nallow_software_override which is used to control whether or not\nuserspace may switch the mode of a PMIC thermal device to\n\"enabled\" in order to enable software override of PMIC automatic\nover temperature shutdown.\n\nallow_software_override -\ntrue: writing \"enabled\" to thermalfs mode file results in\n software override of PMIC automatic over temperature\n shutdown.\nfalse: PMIC automatic over temperature shutdown is always\n enabled. mode file cannot be set to \"enabled\".\n\nChange-Id: I4c47fdf0c0c4704008591755296118ad7fac95ae\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit 8f6d8a8e7e1d149687819af7f9abbb24a8459cc0)\n" }, { "commit": "b2451eac18f1eb5c062ecd866a62333492a3a7f1", "tree": "0abeb673af0f97c1793442be6440b9e21dc45dec", "parents": [ "b42b294f0cecc6c6bb2a84ca22df13af61b89345" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Wed Sep 12 14:58:54 2012 -0700" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Feb 19 09:27:24 2013 -0800" }, "message": "thermal: pm8xxx-tm: Use delayed_work task for temp alarm status reading\n\nUse a delayed_work task to wait at least 40 ms in order for the\ntemp alarm status value to be updated after the TEMP_STAT IRQ\ngoes high. Also remove IRQ enable and disable calls in the ISR\nsince the work item can only be enqueued once before it is run.\n\nChange-Id: Ib5f13d0e82258b399749de96152c081d71981909\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit a42ed24bdc1a1ab8e2c0148430df063ee0679d18)\n" }, { "commit": "b42b294f0cecc6c6bb2a84ca22df13af61b89345", "tree": "21afcc421cb2638848c0d6c2af95d5c7d3d32112", "parents": [ "197c31ee17514df9d8349481e84ec31cdac55521" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Wed Sep 12 14:47:03 2012 -0700" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Feb 19 09:27:02 2013 -0800" }, "message": "thermal: pm8xxx-tm: Improve temp alarm logging and notification filtering\n\nModify the kernel log message which is output when the PMIC\ntemperature alarm triggers so that the current (or estimated)\nPMIC die temperature is shown regardless of ADC type.\n\nAlso change the log message printing and userspace notification\nlogic so that they only happen when the PMIC temp alarm stage\ndiffers from what was previously seen. This will reduce the\nnumber of messages seen while the temperature fluctuates around\none of the thresholds.\n\nChange-Id: I5ee2206ea05dee86666308d11dad1fc5560e58e0\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit 76e6e2a17d89d79711ecff9182f12460368bd5d9)\n" }, { "commit": "197c31ee17514df9d8349481e84ec31cdac55521", "tree": "aa9963bc1892029f24b336b297fec1821554976e", "parents": [ "cd905abd5af2a00e19672a56f7f7eea1ba4bad2b" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Mon Sep 10 13:15:17 2012 -0700" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Feb 19 09:26:28 2013 -0800" }, "message": "thermal: pm8xxx-tm: Modify userspace notification method\n\nChange the userspace notification mechanism in the over\ntemperature interrupt handler from kobject_uevent() to\nsysfs_notify() in order to simplify userspace notification\nhandling. Ensure that the new notification mechanism is\nindependent from the current pm8xxx-tm mode. This means that the\n\"mode\" thermalfs file does not need to be modified in order for\nsysfs_notify() to get called in the interrupt handler.\n\nAs before, writing \"enabled\" to mode will enable the software\noverride of the automatic PMIC hardware stage 2 partial shutdown\nand stage 3 full shutdown. Turning off these features is\ntypically undesirable and should be avoided unless userspace is\nable to take immediate corrective action.\n\nChange-Id: Ibd92b790778fd559df5ce74231e6cf71bef16370\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit 729c3ae9646cb8dc2a0ad0f301f7222bec70f6c6)\n" }, { "commit": "3aabeae171d49c1fabe97fc0eb4a6a48e0969531", "tree": "50adffb3ceed8218923ad7af9dba1c4fc648c1c0", "parents": [ "3e9d336ed987e1f91933ddf25283b9a7012d3f32" ], "author": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Sun Jan 06 00:52:34 2013 -0800" }, "committer": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Tue Feb 19 08:20:30 2013 -0800" }, "message": "ASoC: msm: avoid negative time stamp check\n\nTime stamp is unsigned. There is no need to check for\nnegative value.\n\nChange-Id: I15e380f81e46908f6a9fe8d29c174de1b7c33173\nCRs-fixed: 423372\nSigned-off-by: Patrick Lai \u003cplai@codeaurora.org\u003e\n" }, { "commit": "cd905abd5af2a00e19672a56f7f7eea1ba4bad2b", "tree": "5826d82b62fff9e241c7936d1941493b63e6163e", "parents": [ "eaed88758f080a8900bec1ec11f260dd8d994991", "ccdb96e0444f90a1f8d9810513d6303754c77ba8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Feb 18 20:20:28 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Mon Feb 18 20:20:28 2013 -0800" }, "message": "Merge \"USB: f_rndis: Check if cdev is NULL before accessing\"" }, { "commit": "eaed88758f080a8900bec1ec11f260dd8d994991", "tree": "a0ad7ec8a86b86a7f58dafbc5631ec033f71f935", "parents": [ "a1ab12eab2e7556dcbe7ab0b50225dcad910faf1", "7e70c22fceb82a4cfcc3f855d14d8ff4f3533225" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Feb 18 17:36:40 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Mon Feb 18 17:36:40 2013 -0800" }, "message": "Merge \"usb: gadget: u_ether: Fix NULL pointer derefernce crash\"" }, { "commit": "a1ab12eab2e7556dcbe7ab0b50225dcad910faf1", "tree": "f33fca44cf5e4be94dd65f892a94dedf9c77b996", "parents": [ "18018526fa7a8546ebf860bf7e72cf5b71e69bb8", "f7ba2300ef17ee788ad24b5b03dd45bb3a557e9a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 17 19:18:38 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Sun Feb 17 19:18:37 2013 -0800" }, "message": "Merge \"msm_fb: Optimize the resolution change on hdmi interface\"" }, { "commit": "18018526fa7a8546ebf860bf7e72cf5b71e69bb8", "tree": "799130beea3bf0e6df17b388aadcc38dc03d2a1a", "parents": [ "b4db649278f958c57f27a2c1bbb7e5c2e7ca6e41", "906e35d916175b5e332c45ff7691bc95a3237336" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 17 19:18:31 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Sun Feb 17 19:18:31 2013 -0800" }, "message": "Merge \"msm_fb: display: Send pixel data while sending on/off commands\"" }, { "commit": "f7ba2300ef17ee788ad24b5b03dd45bb3a557e9a", "tree": "0f6c1fc21d67d3596a093f6f0ec17ecbaf3fe250", "parents": [ "b4db649278f958c57f27a2c1bbb7e5c2e7ca6e41" ], "author": { "name": "Nagamalleswararao Ganji", "email": "nganji@codeaurora.org", "time": "Thu Feb 14 21:22:15 2013 -0800" }, "committer": { "name": "Abhishek Kharbanda", "email": "akharban@codeaurora.org", "time": "Sat Feb 16 21:20:56 2013 -0800" }, "message": "msm_fb: Optimize the resolution change on hdmi interface\n\nHDMI resolution is changed twice on cable connect.\nThis will optimize resolution change by turning on\nHDMI core only once, with best possible resolution.\n\nChange-Id: I7f636b0c2c64eb3c661fda2a709b5480db05bd27\nSigned-off-by: Nagamalleswararao Ganji \u003cnganji@codeaurora.org\u003e\nSigned-off-by: Abhishek Kharbanda \u003cakharban@codeaurora.org\u003e\n" }, { "commit": "b4db649278f958c57f27a2c1bbb7e5c2e7ca6e41", "tree": "c7009d8b08b87d7ec6d4f9b62e19d1f40273200a", "parents": [ "7a50c9722f3de4bea4e390fb3f758952b9126805", "02c2d647196461282b5426fc777df1792fff6b76" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 15 23:18:17 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Fri Feb 15 23:18:17 2013 -0800" }, "message": "Merge \"ASoC: wcd9304: Turn off mclk during clock transition\"" }, { "commit": "7a50c9722f3de4bea4e390fb3f758952b9126805", "tree": "47ba06f4d660ecd2e65d39e84aba4f1b9d555f6e", "parents": [ "b6678f7cce5a887eb332917597b0fcc0353a78d3", "06c6c23b3b96b523820d33c63934e1dfefccda0d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 15 23:18:08 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Fri Feb 15 23:18:07 2013 -0800" }, "message": "Merge \"msm: mdm: Fix bug in retrieving driver\u0027s private data\"" }, { "commit": "906e35d916175b5e332c45ff7691bc95a3237336", "tree": "0cdfb16b1c9091c97f58ac7c44765ff7446e5449", "parents": [ "b6678f7cce5a887eb332917597b0fcc0353a78d3" ], "author": { "name": "Siddhartha Agrawal", "email": "agrawals@codeaurora.org", "time": "Fri Feb 15 20:32:52 2013 -0800" }, "committer": { "name": "Siddhartha Agrawal", "email": "agrawals@codeaurora.org", "time": "Fri Feb 15 20:32:52 2013 -0800" }, "message": "msm_fb: display: Send pixel data while sending on/off commands\n\nTo avoid LCD off sequence violeation for some LCD vendors,\nwe need to keep sending video data during off/sleep commands.\nThis fixes issues seen while going to a suspend.\n\nCrs-Fixed: 445707\nChange-Id: I0ba2704502e8959d0f82deea60481cd5b1f0be20\nSigned-off-by: Siddhartha Agrawal \u003cagrawals@codeaurora.org\u003e\n" }, { "commit": "b6678f7cce5a887eb332917597b0fcc0353a78d3", "tree": "458411647327e23b835856a238199ee75e48b9b5", "parents": [ "3c50a668f036d2cffad6c7359cc316f1a041279a", "ca6a02c4af216049d745e0b42464cfd99a6debd4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 15 12:37:33 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Fri Feb 15 12:37:33 2013 -0800" }, "message": "Merge \"misc: isa1200: Replace spinlock with mutex\"" }, { "commit": "3c50a668f036d2cffad6c7359cc316f1a041279a", "tree": "613835069c2734c65a8ad4f3d8652a59b3a3a5f5", "parents": [ "7b0dd336ac7568d04f3cb975816535eef8e2c91e", "beeb8a452eb81288d006785ad1bb0f6d301337ba" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 15 12:37:22 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Fri Feb 15 12:37:22 2013 -0800" }, "message": "Merge \"msm: audio: qdsp6v2: remove unmap ion region before disable\"" }, { "commit": "7b0dd336ac7568d04f3cb975816535eef8e2c91e", "tree": "e1a610762f23d2b2d5a44d0849617fa67a98a151", "parents": [ "84fd6e35338684ca573419be6e6c79c3c385a5f6", "a51ab40d1fce2cddc2f3ac934aeecb9fd8896caa" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 15 12:37:15 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Fri Feb 15 12:37:15 2013 -0800" }, "message": "Merge \"msm_fb: display: remove extra mdp4_dsi_cmd_clk_check()\"" }, { "commit": "84fd6e35338684ca573419be6e6c79c3c385a5f6", "tree": "8cd3aa974934dacbc2a87a54fe9861cd42028d9b", "parents": [ "c48ae7acdc20aef93dfd7d81b5fab73101e13fd4", "5cb9899221ce29aae6b38ad687dff420d0726274" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 15 12:37:09 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Fri Feb 15 12:37:08 2013 -0800" }, "message": "Merge \"msm_fb: display: wait4vsync before set suspend flag\"" }, { "commit": "c48ae7acdc20aef93dfd7d81b5fab73101e13fd4", "tree": "e36210365f57ba298667ac6fd2b4f2a7ad8ec737", "parents": [ "53d5eb9120aa8746c4bdf2638dcdb938e229cef2", "425cde4ea89c77dea6165d1f9af4134339fa7fa5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 15 12:37:02 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Fri Feb 15 12:37:02 2013 -0800" }, "message": "Merge \"msm_fb: display: Copy splash image to kernel memory\"" }, { "commit": "53d5eb9120aa8746c4bdf2638dcdb938e229cef2", "tree": "fe7575467366b6165233960168e3329a3da5a3e8", "parents": [ "c441f082b0db7b10eceaa52640960e4a5ead4c60", "cf61bd5753ad9a5e530e7b0d95bc0fada138d07e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 15 12:36:55 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Fri Feb 15 12:36:55 2013 -0800" }, "message": "Merge \"ASoC: msm: skip sending volume in compressed pass through playback\"" }, { "commit": "02c2d647196461282b5426fc777df1792fff6b76", "tree": "58f9a46b1186a81be169f9c3e305760cded54017", "parents": [ "24cbffb7bd9619be30b9b202ce8afcedd1858cf0" ], "author": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Tue Jan 15 11:40:28 2013 -0800" }, "committer": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Fri Feb 15 12:13:13 2013 -0800" }, "message": "ASoC: wcd9304: Turn off mclk during clock transition\n\nThe clock is not usable when either the clock source changes between\nexternal MCLK and internal RCO or the bandgap mode changes to fast mode.\nIn such cases, turn off master clock and turn on again later to avoid\ncodec from going into bad state\n\nCRs-fixed: 442464\nChange-Id: Id8d07bbbd4bf6c7be16016800d19ab332b960d1a\nSigned-off-by: Joonwoo Park \u003cjoonwoop@codeaurora.org\u003e\n" }, { "commit": "c441f082b0db7b10eceaa52640960e4a5ead4c60", "tree": "307212ebaf1ac1ebd5eda87ac4f3fa876496f9b4", "parents": [ "24cbffb7bd9619be30b9b202ce8afcedd1858cf0", "4670dcdb78264ae4282ed88eada1dd7fa0881a8f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 15 11:07:57 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Fri Feb 15 11:07:56 2013 -0800" }, "message": "Merge \"ASoC: msm: Resume writes only for start command\"" }, { "commit": "ccdb96e0444f90a1f8d9810513d6303754c77ba8", "tree": "72ae82ba4cc35765b63e48ddfc1aab276d642296", "parents": [ "30b7342c25c7d8d3d6b87466489f0ed357b05432" ], "author": { "name": "Chiranjeevi Velempati", "email": "cvelempa@codeaurora.org", "time": "Thu Jan 31 14:35:46 2013 +0530" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Fri Feb 15 10:50:10 2013 -0800" }, "message": "USB: f_rndis: Check if cdev is NULL before accessing\n\nRNDIS control path completion handlers are getting called after setting\ncdev to NULL during disconnect as part of composition switch and this\nis leading to a crash. Avoid this crash, by checking, if cdev is NULL\nbefore accessing. Also don\u0027t queue request\u0027s to DCD, if composition switch\nis in progress.\n\nCRs-Fixed: 433534\nChange-Id: Ic0790415ec3eaf866af2895370249e45adcbba5d\nSigned-off-by: Chiranjeevi Velempati \u003ccvelempa@codeaurora.org\u003e\n(cherry picked from commit 46874732be9d6997ff3bceaf97f07911f9f22440)\n" }, { "commit": "ca6a02c4af216049d745e0b42464cfd99a6debd4", "tree": "27e1eaa55bbf968f8c31b39ea261a8b4f19f2c04", "parents": [ "30b7342c25c7d8d3d6b87466489f0ed357b05432" ], "author": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Wed Dec 05 16:50:48 2012 +0530" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Fri Feb 15 10:04:04 2013 -0800" }, "message": "misc: isa1200: Replace spinlock with mutex\n\nSpinlocks are used for locking in process context.\nSo replace spinlock with mutex.\n\nCRs-fixed: 430723\nChange-Id: I7e422234a48de3ea21fd86033bdaad286490924c\nSigned-off-by: Mohan Pallaka \u003cmpallaka@codeaurora.org\u003e\n(cherry picked from commit 65206ee410894cb15de172a1c06d1490413a4867)\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "24cbffb7bd9619be30b9b202ce8afcedd1858cf0", "tree": "04871376da7b40bee7dda4588e241b6a19c395e1", "parents": [ "50c79bd1ae40c3e27e1fe508c7210d02090d1cba", "27147a768fc84d8819a83445fd5bb9f5c0d0627b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 15 09:47:02 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Fri Feb 15 09:47:02 2013 -0800" }, "message": "Merge \"msm: rotator: Support Fast YUV for 8960, 8064 and 8x30 targets.\"" }, { "commit": "50c79bd1ae40c3e27e1fe508c7210d02090d1cba", "tree": "38c97556d492811e6ecb7f78a8eeabc43b918f62", "parents": [ "30b7342c25c7d8d3d6b87466489f0ed357b05432", "3260415f6cc5752554bde2feff7a8d991cd10430" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 15 09:46:52 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Fri Feb 15 09:46:51 2013 -0800" }, "message": "Merge \"msm_fb : display : Change fps level dynamically.\"" }, { "commit": "5cb9899221ce29aae6b38ad687dff420d0726274", "tree": "83717955a4462f4e834d9d52c232ea98c4d5048a", "parents": [ "7dfc4b284ca395a035e7da058f86dfb4275dd509" ], "author": { "name": "Kuogee Hsieh", "email": "khsieh@codeaurora.org", "time": "Thu Feb 14 11:19:52 2013 -0800" }, "committer": { "name": "Kuogee Hsieh", "email": "khsieh@codeaurora.org", "time": "Fri Feb 15 08:30:10 2013 -0800" }, "message": "msm_fb: display: wait4vsync before set suspend flag\n\nSince wait4vsync checks suspend flag, wait4vsync needs to\nbe executed before suspend flag set to enforce wait happen.\nAlso, when timing generator is turned off, wait4vsync can\nnot be used anymore since the last vsync may have passed\nbefore wait4vsync called. This patch fixed commit_comp\ntimeout cause fence timeout happen on hdmi plug and unplug\ncases.\n\nCRs-fixed: 449027\nChange-Id: I0f5520538bb290643a648c937296b6bc097fe051\nSigned-off-by: Kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "30b7342c25c7d8d3d6b87466489f0ed357b05432", "tree": "a1a7d4098a79a28a3fbee128a5877cba1298c96c", "parents": [ "1b8215a7aa25b52f957491b1258c64ab0e3a9e35", "c9b3634a833e247cced2078b32407b68098b6f58" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 15 04:28:53 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Fri Feb 15 04:28:52 2013 -0800" }, "message": "Merge \"USB: android: Wakeup both reader and writer processes upon TX/RX error\"" }, { "commit": "1b8215a7aa25b52f957491b1258c64ab0e3a9e35", "tree": "5e49670b6d58789b2c9287ae390839d22b5e7151", "parents": [ "62a6d5790354e38ac1121527cad43df720dc25d5", "4dfdab1cdc922241fc129413eae9f7c5803b0f08" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 15 02:51:20 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Fri Feb 15 02:51:19 2013 -0800" }, "message": "Merge \"mmc: core: Fix a deadlock due to race between suspend and delayed BKOPS\"" }, { "commit": "62a6d5790354e38ac1121527cad43df720dc25d5", "tree": "88606819990ee0ec10e17dc7ca2a501143888b3c", "parents": [ "371799effd48a6f61ea8d29a3d774cbdd48e000c", "d77c9bb0f76f56ac38f2ab7b5858bd2461737032" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 15 02:51:19 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Fri Feb 15 02:51:18 2013 -0800" }, "message": "Merge \"mmc: core: Cancel BKOPS checking in case MMC is suspended\"" }, { "commit": "371799effd48a6f61ea8d29a3d774cbdd48e000c", "tree": "010b187ddd2725e63d13c062af7d1807fb75f8ce", "parents": [ "bae9a2bc7b2abe1e06c06ad8b1ddb81ce16b5780", "860cef9bfda9216fae52d63bfa55d754083a56c4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 15 02:51:18 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Fri Feb 15 02:51:17 2013 -0800" }, "message": "Merge \"mmc: use percentage changed sectors as indication to check BKOPS need\"" }, { "commit": "bae9a2bc7b2abe1e06c06ad8b1ddb81ce16b5780", "tree": "f2b31823cd9220909ab6a42693b0ce794662c636", "parents": [ "74909cac1b48af2d1b7c5502a81d1bdd9aa9a7ae", "ec0bbadfa19b1fff76f0b63065ca7153a34bf6e3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 15 02:51:16 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Fri Feb 15 02:51:16 2013 -0800" }, "message": "Merge \"mmc: Do not perform blocking BKOPS\"" }, { "commit": "74909cac1b48af2d1b7c5502a81d1bdd9aa9a7ae", "tree": "1145bc8e3262c568703c5773964803cf03fe8e1e", "parents": [ "79c8aff2a89d73b2d5ebebcf1050b9d4b7480c06", "014010d19f744c478d40a2fa267fa213d1bac779" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 15 02:51:15 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Fri Feb 15 02:51:06 2013 -0800" }, "message": "Merge \"mmc: increase BKOPS polling duration before suspend\"" }, { "commit": "79c8aff2a89d73b2d5ebebcf1050b9d4b7480c06", "tree": "d2e1cb603339900e2771fa3cc428a82974d26d97", "parents": [ "36496004f871daed74b701908b4e38a92d11ecdf", "1aa816c8cef1c93a180f16c4dfb3e0265108e45d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 15 02:51:06 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Fri Feb 15 02:51:05 2013 -0800" }, "message": "Merge \"mmc: core: disable the cache before suspend only after stopping BKOPS\"" }, { "commit": "36496004f871daed74b701908b4e38a92d11ecdf", "tree": "ee4aea58e514a8247eca446aace25f23332a3e2e", "parents": [ "5877f6c7f02bece26b37a9f4ceaafe4871f883a8", "67c157c29bef07cf7ef278cfd1df74045aeb9a16" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 15 02:51:04 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Fri Feb 15 02:51:04 2013 -0800" }, "message": "Merge \"mmc: core: Reduce the time to check for BKOPS need on idle\"" }, { "commit": "5877f6c7f02bece26b37a9f4ceaafe4871f883a8", "tree": "0824647e5e16adefa0c8c6de0e671a5b328a6d09", "parents": [ "af51b7be27d6c27426c8b068f22b5f15508b28ee", "871cefa9ed53fa9f819a039cbd6553dd64e12f68" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 15 02:50:57 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Fri Feb 15 02:50:56 2013 -0800" }, "message": "Merge \"msm_fb: hdmi: HDMI resume delay\"" }, { "commit": "7e70c22fceb82a4cfcc3f855d14d8ff4f3533225", "tree": "c2008cf1c8a9053454bb006fed5680b7e84585f6", "parents": [ "89c52809f2250ad3fa0a0238bb7ea4a5f7639c7e" ], "author": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Fri Feb 15 14:55:30 2013 +0530" }, "committer": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Fri Feb 15 15:20:41 2013 +0530" }, "message": "usb: gadget: u_ether: Fix NULL pointer derefernce crash\n\nport-\u003eport_usb can be NULL if USB cable is disconnected when\nnet device is trying to transfer data which is causing device\nto crash. Hence add changes to eliminate need of accessing\nport-\u003eport_usb to see multi_xfer_pkt value.\n\nCRs-Fixed: 452642\nChange-Id: I60bd2302371238707e951c77912b155d75dc8570\nSigned-off-by: Mayank Rana \u003cmrana@codeaurora.org\u003e\n" }, { "commit": "f212b6ef9408862e06a85f5491a0de4d2394d744", "tree": "64f61928339292749f0d2b5d8b1dbc075e0419eb", "parents": [ "2738eeccbc44aaed38fef732ad27060457956310" ], "author": { "name": "Bhakthavatsala Raghavendra", "email": "braghave@codeaurora.org", "time": "Wed Feb 13 13:27:45 2013 +0530" }, "committer": { "name": "Bhakthavatsala Raghavendra", "email": "braghave@codeaurora.org", "time": "Fri Feb 15 14:08:49 2013 +0530" }, "message": "Revert \"Bluetooth: Avoid re-authentication for secure high connections\"\n\nThis reverts commit 45c9e8141e54a691180c55ed9e242302a74224a8.\n\nChange-Id: Iee644f37c2108013654e99d82f63101db3da009e\nSigned-off-by: Bhakthavatsala Raghavendra \u003cbraghave@codeaurora.org\u003e\n" }, { "commit": "2738eeccbc44aaed38fef732ad27060457956310", "tree": "84a988325535e2e1d1bc0b7dce0e339e630a2398", "parents": [ "af51b7be27d6c27426c8b068f22b5f15508b28ee" ], "author": { "name": "Bhakthavatsala Raghavendra", "email": "braghave@codeaurora.org", "time": "Tue Feb 12 19:44:47 2013 +0530" }, "committer": { "name": "Bhakthavatsala Raghavendra", "email": "braghave@codeaurora.org", "time": "Fri Feb 15 14:05:07 2013 +0530" }, "message": "Bluetooth: Introduce new security level\n\nDefine new security level BT_SECURITY_VERY_HIGH\nfor BT-SAP secuirty requirements\n\nChange-Id: Iee1f60def34d64174c71934ecf55319cee087c13\nSigned-off-by: Bhakthavatsala Raghavendra \u003cbraghave@codeaurora.org\u003e\n" }, { "commit": "4dfdab1cdc922241fc129413eae9f7c5803b0f08", "tree": "e7e86fe3718cf2877f1d0b91cc6ec6304a085918", "parents": [ "d77c9bb0f76f56ac38f2ab7b5858bd2461737032" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Tue Jan 29 21:42:02 2013 +0200" }, "committer": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Fri Feb 15 08:52:12 2013 +0200" }, "message": "mmc: core: Fix a deadlock due to race between suspend and delayed BKOPS\n\nmmc_stop_bkops calls cancel_delayed_work_sync while the host is taken.\nThis can cause a deadlock since the delayed work is blocked on claiming\nthe host. In order to prevent that, mmc_start_bkops will not\nbe blocked waiting on mmc_claim_host and if the host is already taken\nBKOPS will not be performed.\n\nCRs-Fixed: 446090\nChange-Id: I5cda5489e254764b3231b8a12da9e3c241c969c3\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n(cherry picked from commit 8571386b83bea1cbadd81c75bf0614da30b6b7c0)\n" }, { "commit": "d77c9bb0f76f56ac38f2ab7b5858bd2461737032", "tree": "e5087b6e0f9fdc0c5bcc274c6400bf2c9f3a14e4", "parents": [ "860cef9bfda9216fae52d63bfa55d754083a56c4" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Thu Jan 24 12:54:03 2013 +0200" }, "committer": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Fri Feb 15 08:51:53 2013 +0200" }, "message": "mmc: core: Cancel BKOPS checking in case MMC is suspended\n\nIf there is a race condition between the delayed BKOPS work and\nthe runtime suspend, and the suspend occurs before the delayed work,\nthe delayed work should be canceled.\nSince mmc_claim_host can fail in case the host is suspended, we should\ncheck if the delayed work is canceled before trying to claim the host.\n\nCRs-Fixed: 443236\nChange-Id: I9df506de4da6f9277a89ed608724f5b6e8585bfd\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n(cherry picked from commit 5a3d216c005725baad96b6858dbcd370056e470c)\n" }, { "commit": "860cef9bfda9216fae52d63bfa55d754083a56c4", "tree": "297268313bd452a142391224e5a9cc9f2b42b4c5", "parents": [ "ec0bbadfa19b1fff76f0b63065ca7153a34bf6e3" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Wed Jan 16 09:48:25 2013 +0200" }, "committer": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Fri Feb 15 08:51:30 2013 +0200" }, "message": "mmc: use percentage changed sectors as indication to check BKOPS need\n\nIn order to keep card endurance, it is best not to check the need for\nBKOPS every time the MMC is idle.\nHowever, the decision when to check the card need for BKOPS according\nto number of changed sectors doesn\u0027t fit all cards sizes. Therefore,\nthe check for BKOPS need is based on percentages of changed sectors\nof the card size.\nIn order to assure that BKOPS will be triggered again in case it was\ninterrupted, the accumulated number of changed sectors is cleared only\nin case BKOPS was completed without interruption.\n\nChange-Id: I598f64b652a524a431b87d103fd5890b808f11b1\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n(cherry picked from commit e1eae988976536834759a45cf7f62e1cb2b82838)\n" }, { "commit": "ec0bbadfa19b1fff76f0b63065ca7153a34bf6e3", "tree": "893e7d41b0ece1dda9baf606c5ac116b2b515352", "parents": [ "014010d19f744c478d40a2fa267fa213d1bac779" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Wed Jan 16 09:43:45 2013 +0200" }, "committer": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Fri Feb 15 08:51:11 2013 +0200" }, "message": "mmc: Do not perform blocking BKOPS\n\nBKOPS operations can take long time and cause bad user experience and\nfailure of time critical operations as EFS sync.\nIn order to prevent the above failures all the levels will be handled only\nin idle time BKOPS handling and will allow interrupting the BKOPS when\nneeded.\nIn case the card raised an exception with a need for BKOPS, a flag will\nbe set to indicate MMC to start the BKOPS activity when it becomes idle.\n\nFixed-CRs: 432027\nChange-Id: I5f7b43569c0242f0fea83355f76f286b1ad037bc\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n(cherry picked from commit 5f8ac3b955e44def61c2238192000ffe5f126714)\n" }, { "commit": "014010d19f744c478d40a2fa267fa213d1bac779", "tree": "909b2efe03564cc51841df7547046656f92a92fd", "parents": [ "1aa816c8cef1c93a180f16c4dfb3e0265108e45d" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Fri Jan 04 11:04:47 2013 +0200" }, "committer": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Fri Feb 15 08:50:52 2013 +0200" }, "message": "mmc: increase BKOPS polling duration before suspend\n\nThe timeout for the BKOPS polling is increased in order to allow the\ncard to complete the BKOPS before going to suspend.\nIn case we exit due to timeout we need to stop the BKOPS activity\nperformed by the card.\n\nChange-Id: I39686de0c06a57242f11c8b1c9ae50b33417c088\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n(cherry picked from commit ea1385e6d7542d4e3ad510de94ead00bece7823e)\n" }, { "commit": "1aa816c8cef1c93a180f16c4dfb3e0265108e45d", "tree": "a8e97f88afbf23d9ec833728ac8b308725cfea29", "parents": [ "67c157c29bef07cf7ef278cfd1df74045aeb9a16" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Mon Dec 31 16:17:58 2012 +0200" }, "committer": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Fri Feb 15 08:50:32 2013 +0200" }, "message": "mmc: core: disable the cache before suspend only after stopping BKOPS\n\nmmc_cache_ctrl was called in runtime suspend before MMC interrupted\nBKOPS in case it is still running on the card. This caused the cache\ndisable to timeout.\nTherefore, mmc_cache_ctrl has to move to mmc_suspend where we are sure\nthat the card can go into suspend and there is no pending activity.\n\nCRs-Fixed: 436805\nChange-Id: I76281a766f48ccacc24685a64067df4e60cfe1d8\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n(cherry picked from commit 67a51386fd99be62e5e68f4bc76ee00c19099cd6)\n" }, { "commit": "67c157c29bef07cf7ef278cfd1df74045aeb9a16", "tree": "a0d289d90b908b9971c997b0ece627d750aadaf6", "parents": [ "af51b7be27d6c27426c8b068f22b5f15508b28ee" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Wed Jan 16 09:29:10 2013 +0200" }, "committer": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Fri Feb 15 08:50:13 2013 +0200" }, "message": "mmc: core: Reduce the time to check for BKOPS need on idle\n\nIn order to allow the card to perform BKOPS as early as possible without\ncausing degradation to a flow of requests, we reduce the time of the\nBKOPS delayed work to 200ms.\nBased on experience, 200ms will allow requests to be performed without\na delay of checking the BKOPS.\nThis patch also allows the host controller to set any other time if\nrequired.\n\nChange-Id: I1e56bfd0c9471abf4da50befe6d14fe0199129e7\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n(cherry picked from commit 70b00220e7564b00e3b0747260fe2c2dbe62f45d)\n" }, { "commit": "871cefa9ed53fa9f819a039cbd6553dd64e12f68", "tree": "0824647e5e16adefa0c8c6de0e671a5b328a6d09", "parents": [ "af51b7be27d6c27426c8b068f22b5f15508b28ee" ], "author": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Sun Feb 03 01:45:16 2013 +0530" }, "committer": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Fri Feb 15 10:11:43 2013 +0530" }, "message": "msm_fb: hdmi: HDMI resume delay\n\nRemove the delay in HDMI resume sequence by not waiting for HPD\nto be switched on. HDMI panel will not be turned on by default\nwhen the device resumes and would instead be turned on by HPD\nsense if it is still connected.\n\nCRs-Fixed: 440559\nChange-Id: Id276dddbcebf9226e9688aa1b5dad4b281545b21\nSigned-off-by: Ajay Singh Parmar \u003caparmar@codeaurora.org\u003e\n" }, { "commit": "3260415f6cc5752554bde2feff7a8d991cd10430", "tree": "c918cae1e08511909bdc9fc29861d26d8132c654", "parents": [ "89c52809f2250ad3fa0a0238bb7ea4a5f7639c7e" ], "author": { "name": "Vishnuvardhan Prodduturi", "email": "vproddut@codeaurora.org", "time": "Fri Feb 01 17:38:53 2013 +0530" }, "committer": { "name": "Vishnuvardhan Prodduturi", "email": "vproddut@codeaurora.org", "time": "Fri Feb 15 06:25:27 2013 +0530" }, "message": "msm_fb : display : Change fps level dynamically.\n\nThis change lets the user modify the fps level dynamically using\nsysfs interface.\n\nChange-Id: Ie99bbca5ec1a0b5ff5fa3570874b254e3fb7235c\nSigned-off-by: Vishnuvardhan Prodduturi \u003cvproddut@codeaurora.org\u003e\n" }, { "commit": "af51b7be27d6c27426c8b068f22b5f15508b28ee", "tree": "b61b95e2983b986ed8697f596dc0a2af45dc4cdc", "parents": [ "e2b300c70130924516a15ca5fbdaa56a98fc8b66", "8dec619984e0896b71b42105cdf0fd91a3eeeba2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 14 14:18:25 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Feb 14 14:18:25 2013 -0800" }, "message": "Merge \"wcnss: Add interface to Reset wcnss\"" }, { "commit": "e2b300c70130924516a15ca5fbdaa56a98fc8b66", "tree": "c010d9601d9613a1f33e9dadd3b55077c9326d3f", "parents": [ "c68c75602f2859c80570c572ecff546f4b9fb923", "5a386c6028f8e122a8466c0987cf49b170a48601" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 14 14:18:12 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Feb 14 14:18:12 2013 -0800" }, "message": "Merge \"mmc: card: fix timeout on erase/trim command due to sanitize\"" }, { "commit": "c68c75602f2859c80570c572ecff546f4b9fb923", "tree": "e6961b23aacf1ba0e141d27de6bff4261186ea78", "parents": [ "8ebccf59dad0435e65429363643a9ce86f89479e", "ffc77414d6b102fd4d42356753f9480e605cf0c6" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 14 14:17:48 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Feb 14 14:17:48 2013 -0800" }, "message": "Merge \"msm: vidc: Add support for NV21 color format encoding\"" }, { "commit": "8ebccf59dad0435e65429363643a9ce86f89479e", "tree": "0fcb12e42a6dd0f217906bdc04a0b1d6bfe07d09", "parents": [ "4eae1d7afa4cbb2292289fe9bbb739fad4f98023", "4e3f5247bcd098ad1488caa3ecdc3b506e9efbf7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 14 14:17:41 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Feb 14 14:17:40 2013 -0800" }, "message": "Merge \"ASoC: wcd9310: Correct the mixer controls for Compander switches\"" }, { "commit": "4eae1d7afa4cbb2292289fe9bbb739fad4f98023", "tree": "6cfa00a0638f7d30a0b4911bdbc815a12276760e", "parents": [ "30045be7e0f4b33dad7429c56004a2605f43d2a9", "4479b4823e7636e6b8f5c90ba88a36a5b2cfe54f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 14 14:17:15 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Feb 14 14:17:15 2013 -0800" }, "message": "Merge \"net: rmnet_usb: Add support for PID 0x9079\"" }, { "commit": "30045be7e0f4b33dad7429c56004a2605f43d2a9", "tree": "5012b98552048aa4efbbf23659cdcd320cbccb1f", "parents": [ "88d4ea42064b52e746544b1766caa0366f3013d5", "f0b04deea80ee362aa9a56d7cdec0f4cd092df2c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 14 14:17:14 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Feb 14 14:17:14 2013 -0800" }, "message": "Merge \"net: rmnet_usb: Support multiple instances\"" }, { "commit": "88d4ea42064b52e746544b1766caa0366f3013d5", "tree": "9dfc89c1b48f28a8eccb63e2c4c045a4a8e151ba", "parents": [ "275c8883b9645586a9454b3f645d1513b5234018", "2bf9085de8acf2fc71b06d9f6f169db762e1aefd" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 14 14:16:57 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Feb 14 14:16:56 2013 -0800" }, "message": "Merge \"msm: mdm: Shutdown specific external modem\"" }, { "commit": "275c8883b9645586a9454b3f645d1513b5234018", "tree": "0dd93ae7414509843f25046382856eaba26931b6", "parents": [ "5f7721060cd876f4a5918fa90ac461ef0aa8d9ea", "f3cb4876d1d69f84a981f3ade85dd3329186b93f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 14 14:16:56 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Feb 14 14:16:55 2013 -0800" }, "message": "Merge \"msm: mdm: do not assert ap2mdm_errfatal gpio in some cases during SSR\"" }, { "commit": "5f7721060cd876f4a5918fa90ac461ef0aa8d9ea", "tree": "323f66b156d60aac443530ebdcfb9c9cad756836", "parents": [ "d92f1b740f01830456c3ef9c7c9bb4ab79398c2a", "fdde32ba5f718f0224db3092747e644988044054" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 14 14:16:55 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Feb 14 14:16:54 2013 -0800" }, "message": "Merge \"msm: 8064: add configuration to prevent asserting ap2m_errfatal\"" }, { "commit": "d92f1b740f01830456c3ef9c7c9bb4ab79398c2a", "tree": "84a84708a6e189c9db1f87aa2385c580d43ee7df", "parents": [ "256423a8a1c250409ac665ed1d597d457451c20b", "b754b04c679da12de27ddcd08332a6094d97fdd6" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 14 14:16:54 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Feb 14 14:16:53 2013 -0800" }, "message": "Merge \"msm: sysmon: Add support for second USB HSIC modem\"" }, { "commit": "256423a8a1c250409ac665ed1d597d457451c20b", "tree": "98e533b9449b4137f063d65d997585dbbed0a752", "parents": [ "7809f18067777ad17998f4f5631da58f700d965f", "01fec0960a89a00f69621e1bfdd7f22f2d6e044b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 14 14:16:53 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Feb 14 14:16:52 2013 -0800" }, "message": "Merge \"msm: hsic_sysmon: Support multiple instances\"" }, { "commit": "cf61bd5753ad9a5e530e7b0d95bc0fada138d07e", "tree": "6fa8aecb4f90526c9969377767c9e4d992a2af83", "parents": [ "40bcfae17681cd588b55cc5ecd293d6af4824acc" ], "author": { "name": "Subhash Chandra Bose Naripeddy", "email": "snariped@codeaurora.org", "time": "Wed Feb 13 22:20:51 2013 -0800" }, "committer": { "name": "Subhash Chandra Bose Naripeddy", "email": "snariped@codeaurora.org", "time": "Thu Feb 14 12:17:35 2013 -0800" }, "message": "ASoC: msm: skip sending volume in compressed pass through playback\n\nFor the playback use of compressed pass through on HDMI device,\npost processing features are not supported and should not be sent to\nDSP. Hence the change is now to send the volume only for the playback\nof decode and render in DSP and skip for compressed pass through\n\nCRs-Fixed: 442140\nChange-Id: I2125f08baf1676f6bb1d13463a1f01dfe280963f\nSigned-off-by: Subhash Chandra Bose Naripeddy \u003csnariped@codeaurora.org\u003e\n" }, { "commit": "8dec619984e0896b71b42105cdf0fd91a3eeeba2", "tree": "586cb8a9574796c2876d92735d8d07c2ab5634cf", "parents": [ "89c52809f2250ad3fa0a0238bb7ea4a5f7639c7e" ], "author": { "name": "Sameer Thalappil", "email": "sameert@codeaurora.org", "time": "Mon Sep 24 15:26:12 2012 -0700" }, "committer": { "name": "Sameer Thalappil", "email": "sameert@codeaurora.org", "time": "Thu Feb 14 11:48:14 2013 -0800" }, "message": "wcnss: Add interface to Reset wcnss\n\nAdd wcnss reset interface, this interface generates an FIQ to Riva.\nUpon receiving this interrupt, Riva will execute the ERR_FATAL\nroutine and invoke SSR.\n\nConflicts:\n\n\tdrivers/net/wireless/wcnss/wcnss_wlan.c\n\tinclude/linux/wcnss_wlan.h\n\nChange-Id: I74c293121cb69b312ed980902a12019adb700792\nSigned-off-by: Sameer Thalappil \u003csameert@codeaurora.org\u003e\n" }, { "commit": "5a386c6028f8e122a8466c0987cf49b170a48601", "tree": "33483d7cf029279e77d4df859bdd2d505101d70b", "parents": [ "89c52809f2250ad3fa0a0238bb7ea4a5f7639c7e" ], "author": { "name": "Yaniv Gardi", "email": "ygardi@codeaurora.org", "time": "Tue Dec 04 16:42:58 2012 +0200" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Thu Feb 14 10:39:11 2013 -0800" }, "message": "mmc: card: fix timeout on erase/trim command due to sanitize\n\nSanitize command should never be issued with timeout argument of 0,\ncause then it invokes timeout.\nMoreover, sanitize command should not be called from routines that\ndoes erase/trim/secure-discard commands, but only from a routine that\nissues the sanitize spesifically.(mmc_blk_issue_sanitize_rq)\n\nChange-Id: Ia3e3737f4bad149edc2248b8a30d74a9bd812be1\nSigned-off-by: Yaniv Gardi \u003cygardi@codeaurora.org\u003e\n(cherry picked from commit 9a87427db940047907aee0dc86965645656f1ca9)\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "7809f18067777ad17998f4f5631da58f700d965f", "tree": "de543a9040fb475badd1761c1971580bfbbb78bf", "parents": [ "ce26b4cb11354f2ebc3311992312b7208c1f8fab", "7091f24711dc60bbf2d9845b870d491554ec2fae" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 14 10:26:31 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Feb 14 10:26:30 2013 -0800" }, "message": "Merge \"gpu: ion: handle allocation error during heap protection in CP heap\"" }, { "commit": "ce26b4cb11354f2ebc3311992312b7208c1f8fab", "tree": "e3c1779ad534918f8bb10f246b9a3ca4d021b62e", "parents": [ "89c52809f2250ad3fa0a0238bb7ea4a5f7639c7e", "b485f3a727975e5fb242612ee76e4286364117f5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 14 10:26:29 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Feb 14 10:26:28 2013 -0800" }, "message": "Merge \"msm: vidc: unsecure heaps in the right order during error handling\"" }, { "commit": "3e9d336ed987e1f91933ddf25283b9a7012d3f32", "tree": "0c3565221d48b0df6f9f88a4ffb946e650cd7a03", "parents": [ "e4b53dfae76290343abe73ccc1b079e58a2f74c0" ], "author": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Mon Jan 07 16:35:28 2013 -0800" }, "committer": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Thu Feb 14 08:40:41 2013 -0800" }, "message": "ASoC: msm: qdsp6: add check for maximum COPPs allowed\n\nThere is maximum number of COPPs ASM session can be routed\nto even though there are far more number of AFE ports.\nAdd the check to make sure caller is not routing to more\nthan ADM can actually support.\n\nChange-Id: Iee97dd7e5d21820c87244a422fa252c2228185f9\nSigned-off-by: Patrick Lai \u003cplai@codeaurora.org\u003e\n" }, { "commit": "e4b53dfae76290343abe73ccc1b079e58a2f74c0", "tree": "a067a40a7463bda7d31a6e0bdedaf157767975d3", "parents": [ "6d9fc60b499c8ceec2a947d714d6b1a565b85b8c" ], "author": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Sun Jan 06 00:27:22 2013 -0800" }, "committer": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Thu Feb 14 08:40:40 2013 -0800" }, "message": "arm: mach-msm: qdsp6v2: remove unnecessary write count check\n\nwrite count is never going to be negative value\n\nChange-Id: Ie9468d4fbcccb2b7df87cbb67d0a911e584c8e62\nSigned-off-by: Patrick Lai \u003cplai@codeaurora.org\u003e\n" }, { "commit": "6d9fc60b499c8ceec2a947d714d6b1a565b85b8c", "tree": "ac739e57f0e337d880a299590b0fdb31400cd2a8", "parents": [ "537218b1221f365bd57625856bdd8a991f923e48" ], "author": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Sat Jan 05 23:36:38 2013 -0800" }, "committer": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Thu Feb 14 08:40:00 2013 -0800" }, "message": "ASoC: msm: qdsp6: avoid unnecessary check\n\nRemove unnecessary check as it should be reasonable\nto assume valid parameter would be issued through\ndebugfs interface\n\nChange-Id: I1a23d8c5324b813bf9501c5462684234926b5dcc\nSigned-off-by: Patrick Lai \u003cplai@codeaurora.org\u003e\n" }, { "commit": "537218b1221f365bd57625856bdd8a991f923e48", "tree": "af9300d7c848474411666659d613843f2aeb8aee", "parents": [ "89c52809f2250ad3fa0a0238bb7ea4a5f7639c7e" ], "author": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Sat Jan 05 21:46:38 2013 -0800" }, "committer": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Thu Feb 14 08:39:59 2013 -0800" }, "message": "arm: mach-msm: qdsp6v2: update dual mono setting check\n\nAUDIO_AAC_DUAL_MONO_PL_PR is 0 anyway and dual mono\nsetting is defined as unsigned value. Hence,\nthere is no need if new setting is less than\nAUDIO_AAC_DUAL_MONO_PL_PR.\n\nChange-Id: I2e18a875e211d05d100d827fcd5b67545de168ac\nSigned-off-by: Patrick Lai \u003cplai@codeaurora.org\u003e\n" }, { "commit": "ffc77414d6b102fd4d42356753f9480e605cf0c6", "tree": "43409b6d5bbb307acd359c0462691d241a6f4ace", "parents": [ "89c52809f2250ad3fa0a0238bb7ea4a5f7639c7e" ], "author": { "name": "Deepak Verma", "email": "dverma@codeaurora.org", "time": "Tue Feb 12 16:55:21 2013 +0530" }, "committer": { "name": "Deepak Verma", "email": "dverma@codeaurora.org", "time": "Thu Feb 14 17:18:06 2013 +0530" }, "message": "msm: vidc: Add support for NV21 color format encoding\n\nThis change adds NV21 color format encoding support.\n\nCRs-fixed: 448511\nChange-Id: If26f1241a006e2d325668b8e189f6ff76df8e125\nSigned-off-by: Deepak Verma \u003cdverma@codeaurora.org\u003e\n" }, { "commit": "89c52809f2250ad3fa0a0238bb7ea4a5f7639c7e", "tree": "b27be67ff9ee44e5b12f0b2e43f4c45251862c55", "parents": [ "a4095c3af3cf304e6d2b7e2fcddc2632119b11f9", "800ac3766c1d38918541410e1d8df57ce1e26c3f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Feb 13 18:32:50 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Feb 13 18:32:49 2013 -0800" }, "message": "Merge \"net: rmnet_usb: Use USB_DEVICE_INTERFACE_NUMBER\"" }, { "commit": "a4095c3af3cf304e6d2b7e2fcddc2632119b11f9", "tree": "c9fd4708398bb328e6b1124da1912d6610b2928f", "parents": [ "47e4386774a6002300aa9c040eaf36d01564b24f", "02bccf5c10e0e712df252116679a4705ad531da1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Feb 13 18:32:41 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Feb 13 18:32:40 2013 -0800" }, "message": "Merge \"msm: camera: Add missing unsubscribe function in server ops.\"" }, { "commit": "47e4386774a6002300aa9c040eaf36d01564b24f", "tree": "ec7d50766e560b0b9d02236245f41e37e43acb62", "parents": [ "0e3d3df4b3f33efb4d6e40fc3e80764c5e42cf9a", "7ea5a25561e6d35c4591d4b86f32e15b7bcceb93" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Feb 13 18:32:27 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Feb 13 18:32:27 2013 -0800" }, "message": "Merge \"msm: socinfo: Add support for MSM8130 variants of MSM8930\"" }, { "commit": "0e3d3df4b3f33efb4d6e40fc3e80764c5e42cf9a", "tree": "74f7bd2946f749a929d51e8d22b75a367e5b32cc", "parents": [ "e6e671453937e9a6d54f809a65a8f3a7abb0462a", "442d78a71ab3551d898cd936f320201e0ca193d4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Feb 13 18:32:15 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Feb 13 18:32:14 2013 -0800" }, "message": "Merge \"msm: acpuclock-8930ab: Lower VDD_DIG voltage vote for L2 at 384MHz\"" }, { "commit": "e6e671453937e9a6d54f809a65a8f3a7abb0462a", "tree": "42f358f853f346f9405f50933231c7cfc06f7e18", "parents": [ "a697b47ce1798732ed966430b56d5bb55879f31f", "224b7775865bff7defcedad9031870b113fe3483" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Feb 13 18:32:07 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Feb 13 18:32:06 2013 -0800" }, "message": "Merge \"wcnss: new SMD control channel with WCNSS\"" }, { "commit": "a697b47ce1798732ed966430b56d5bb55879f31f", "tree": "c50e71fefdff790309ec6a40382a46bac95d65d5", "parents": [ "7a480c0ae26c6b07fe78561d3a493323fcad6927", "aefa110b5c9ab579ea9b8b4ce98453acbcedf548" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Feb 13 18:31:53 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Feb 13 18:31:52 2013 -0800" }, "message": "Merge \"video: msm: Calibration config implementation\"" }, { "commit": "7a480c0ae26c6b07fe78561d3a493323fcad6927", "tree": "2ea0cd7b0799b35f92d09d7869244928ab7b688f", "parents": [ "15ae2c19ff4e955031f7853f1924899a646a279a", "7f295d1623e0adcc3fa3332f2d4cd0b268eb243b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Feb 13 18:31:23 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Feb 13 18:31:22 2013 -0800" }, "message": "Merge \"msm: vidc: Move metadata shared input mem to firmware heap.\"" }, { "commit": "4479b4823e7636e6b8f5c90ba88a36a5b2cfe54f", "tree": "00ee6b5ece3adeccb5ad618b8c8b766fb8efa46e", "parents": [ "f0b04deea80ee362aa9a56d7cdec0f4cd092df2c" ], "author": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Thu Feb 07 12:31:21 2013 -0800" }, "committer": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Wed Feb 13 15:39:22 2013 -0800" }, "message": "net: rmnet_usb: Add support for PID 0x9079\n\nPID ID 9079 is a clone of 9048 intended for use over HSUSB\nconnection. The net device name for its interfaces will be\nprefixed \"rmnet2_usbX\". The number and names of its control\ninterfaces will need to be initialized from userspace.\n\nChange-Id: I98d25f23246c93f96a934dcfc2411c4b6d970b15\nSigned-off-by: Jack Pham \u003cjackp@codeaurora.org\u003e\n" }, { "commit": "f0b04deea80ee362aa9a56d7cdec0f4cd092df2c", "tree": "89e5a6398b1c5159f6b57425448cd119819f998e", "parents": [ "800ac3766c1d38918541410e1d8df57ce1e26c3f" ], "author": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Wed Feb 13 09:31:50 2013 -0800" }, "committer": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Wed Feb 13 15:39:14 2013 -0800" }, "message": "net: rmnet_usb: Support multiple instances\n\nCurrently rmnet_usb supports a maximum of 4 net interfaces on a\nsingle device at a time. This change allows the possibility of\nmultiple concurrent USB devices with RmNet interfaces to be\nsupported. The number and names of devices supported are now\nspecified by the following new module parameters:\n\n* no_rmnet_devs - default: 1\n* no_rmnet_insts_per_dev - default: 4\n* rmnet_dev_names - default: \"hsicctl\"\n* rmnet_data_init - initializes device nodes with above params\n\nUserspace must now write to \"rmnet_data_init\" in order for the\ncontrol device nodes to be created.\n\nChange-Id: I1e36d85b7fab4290ef64ef635162eb6e4de84e50\nSigned-off-by: Jack Pham \u003cjackp@codeaurora.org\u003e\n" }, { "commit": "442d78a71ab3551d898cd936f320201e0ca193d4", "tree": "b2bad26f4b90244ad2f2bf5cc5fe06151163c171", "parents": [ "8aa33a7254dbbd180b89a8f2ee9ba96a823241d1" ], "author": { "name": "Tianyi Gou", "email": "tgou@codeaurora.org", "time": "Tue Feb 05 18:27:32 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Feb 13 13:51:43 2013 -0800" }, "message": "msm: acpuclock-8930ab: Lower VDD_DIG voltage vote for L2 at 384MHz\n\nNew characterization data shows that vdd_dig voltage for L2@384MHz\ncan be lowered to the low level. Update the data in this patch.\n\nChange-Id: Ia80ee9397b3b433b96f2bce49a86d5ef7b024fc5\nSigned-off-by: Tianyi Gou \u003ctgou@codeaurora.org\u003e\n(cherry picked from commit f684b386cbe45229e12a0eb778b933c69bceb0d4)\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "15ae2c19ff4e955031f7853f1924899a646a279a", "tree": "a7f01852af9b5c08d5be91b20d744b67cb312127", "parents": [ "86e5e7c13cf84467ebdc6ed95b6f30bb6d99dec3", "ce70bb93ecb8bda47687fcada1ce1b30a991a4e2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Feb 13 13:08:56 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Feb 13 13:08:56 2013 -0800" }, "message": "Merge \"diag: Modify diag to support multiple hsic instances\"" }, { "commit": "86e5e7c13cf84467ebdc6ed95b6f30bb6d99dec3", "tree": "8604a72f0d779b7d7039b676503ab6d7d87a1410", "parents": [ "2e6dc672052419e10bfc9180437e5335baa53e1b", "5ca5973a86e1254968b9f132c8f5367c9e928a5b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Feb 13 13:08:30 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Feb 13 13:08:30 2013 -0800" }, "message": "Merge \"USB: ci13xxx_udc: Add support for large requests\"" }, { "commit": "2e6dc672052419e10bfc9180437e5335baa53e1b", "tree": "58604f950ea12dd4f7a48fbb2fcc9c07f69e79ba", "parents": [ "cd91c5656a69aa6b57ca15f85f44f5bf3123f615", "72b351c8d1728a71f33cf00e51517c3b178f0176" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Feb 13 13:08:30 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Feb 13 13:08:29 2013 -0800" }, "message": "Merge \"USB: ci13xxx_udc: Add module param to enable streaming mode\"" }, { "commit": "cd91c5656a69aa6b57ca15f85f44f5bf3123f615", "tree": "cd799f422e2c14a87f8d58c819502aaefaec0581", "parents": [ "8aa33a7254dbbd180b89a8f2ee9ba96a823241d1", "9ade191de7361c8a790961e8e9d0292b5a8d5f32" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Feb 13 13:08:29 2013 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Feb 13 13:08:29 2013 -0800" }, "message": "Merge \"USB: gadget: Add module parameter for Rx transfer length\"" }, { "commit": "aefa110b5c9ab579ea9b8b4ce98453acbcedf548", "tree": "5b099b88191184f712cbac87893fbc235089b7ba", "parents": [ "a0078ea79c8c16ba1715a545fcdd69b386fe88b1" ], "author": { "name": "Carl Vanderlip", "email": "carlv@codeaurora.org", "time": "Mon Jan 14 14:33:56 2013 -0800" }, "committer": { "name": "Pravin Tamkhane", "email": "pravint@codeaurora.org", "time": "Wed Feb 13 12:53:33 2013 -0800" }, "message": "video: msm: Calibration config implementation\n\nAllow software to selectively read/write MDP color calibration registers.\nThis is needed to allow calibration tool to individually configure\nregisters.\n\nChange-Id: I5db2dcbca0b3433c7fedf9033ceff0cf6a5e0e1f\nSigned-off-by: Carl Vanderlip \u003ccarlv@codeaurora.org\u003e\n(cherry picked from commit afc6fbf054d079761d5c2ee85242e56d640ee409)\nSigned-off-by: Pravin Tamkhane \u003cpravint@codeaurora.org\u003e\n" }, { "commit": "224b7775865bff7defcedad9031870b113fe3483", "tree": "aef17e5da303b4e3f7d7deee89f7e0517a0f6619", "parents": [ "45629872f5ad8f4f0a8b8ea6af589ce5c324ff31" ], "author": { "name": "Sameer Thalappil", "email": "sameert@codeaurora.org", "time": "Fri Aug 10 17:17:09 2012 -0700" }, "committer": { "name": "Sameer Thalappil", "email": "sameert@codeaurora.org", "time": "Wed Feb 13 12:48:35 2013 -0800" }, "message": "wcnss: new SMD control channel with WCNSS\n\nA new SMD control channel is opened with WCNSS, currently only the\nversion information is exchanged thru this channel. WCNSS version is\nexposed thru /sys interface.\n\nConflicts:\n\n\tdrivers/net/wireless/wcnss/wcnss_wlan.c\n\nChange-Id: I45638bdd992846fa6087b6131180684d30805002\nSigned-off-by: Sameer Thalappil \u003csameert@codeaurora.org\u003e\n" }, { "commit": "2bf9085de8acf2fc71b06d9f6f169db762e1aefd", "tree": "de909050e91c3cda89c914f180bece61fe2f66b3", "parents": [ "f3cb4876d1d69f84a981f3ade85dd3329186b93f" ], "author": { "name": "Ameya Thakur", "email": "ameyat@codeaurora.org", "time": "Fri Feb 08 14:19:15 2013 -0800" }, "committer": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Wed Feb 13 11:54:23 2013 -0800" }, "message": "msm: mdm: Shutdown specific external modem\n\nThe shutdown ioctl now gets the system monitor id for the modem to shutdown\nfrom the platform data structure rather than using a hardcoded value.\n\nChange-Id: Ibe7666075903258932014bcf4c79aba0f71184fd\nSigned-off-by: Ameya Thakur \u003cameyat@codeaurora.org\u003e\n" }, { "commit": "f3cb4876d1d69f84a981f3ade85dd3329186b93f", "tree": "c3e318bedee11ecb7995c6ac80d486a71c5e6f1c", "parents": [ "fdde32ba5f718f0224db3092747e644988044054" ], "author": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Wed Feb 06 17:20:05 2013 -0800" }, "committer": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Wed Feb 13 11:54:22 2013 -0800" }, "message": "msm: mdm: do not assert ap2mdm_errfatal gpio in some cases during SSR\n\nSome platforms have the ap2mdm_errfatal line shared between\ntwo external modems. Current implementation is to assert that\ngpio during the SSR shutdown callback but that does not allow\nfor independent restart of each modem. On most platforms it is\nactually not necessary to assert the ap2mdm_errfatal during\nrestart of the mdm. It is necessary during kernel panic of the\napps processor but that is already done in the panic handler.\nThe use case where it is necessary to assert the errfatal gpio\nis where the mdm needs to be restarted by the SSR module, for\nexample on platforms where the internal and external modems need\nto be restarted together. This patch adds a platform data parameter\nto identify those platforms.\n\nChange-Id: Ie4f5cbed752a04a80f1e4bfb50da03f52e010045\nSigned-off-by: Joel King \u003cjoelking@codeaurora.org\u003e\n" }, { "commit": "fdde32ba5f718f0224db3092747e644988044054", "tree": "f9d8e6e66693473aa57bb7c5356e4174f2e63f5e", "parents": [ "b754b04c679da12de27ddcd08332a6094d97fdd6" ], "author": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Wed Feb 06 17:38:05 2013 -0800" }, "committer": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Wed Feb 13 11:54:22 2013 -0800" }, "message": "msm: 8064: add configuration to prevent asserting ap2m_errfatal\n\nFor the DSDA2 target with two external modems, independent\nsubsystem restart of each modem is required. This flag is\nused by the mdm driver to prevent it from asserting the\nap2mdm_errfatal during subsystem shutdown for the DSDA2 target,\notherwise both modems would reset because they share the same\ngpio.\n\nChange-Id: I27aedaa2b1b8756079710e41d8a4a9572b8ff83a\nSigned-off-by: Joel King \u003cjoelking@codeaurora.org\u003e\n" }, { "commit": "b754b04c679da12de27ddcd08332a6094d97fdd6", "tree": "766ceafcab18a6e2a26a86d10c7fbcf3275b6bf9", "parents": [ "01fec0960a89a00f69621e1bfdd7f22f2d6e044b" ], "author": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Wed Feb 13 11:54:14 2013 -0800" }, "committer": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Wed Feb 13 11:54:14 2013 -0800" }, "message": "msm: sysmon: Add support for second USB HSIC modem\n\nAdd support for a secondary instance of an external modem over\nthe USB/HSIC transport.\n\nChange-Id: I1891ccc14279dfcbcf5e3555a6d42f42049e208a\nSigned-off-by: Jack Pham \u003cjackp@codeaurora.org\u003e\n" } ], "next": "01fec0960a89a00f69621e1bfdd7f22f2d6e044b" }