)]}'
{
  "log": [
    {
      "commit": "5bb644a0fd25a5e083ecbfaa92a211db99aa6ef7",
      "tree": "d2a6d5ff2323db0c475be15c63bb8fc55482a1e2",
      "parents": [
        "cc32abd494c0a8f76f2638e3f3a76e01c68bc9ea"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Sun May 17 11:40:42 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed May 20 14:46:25 2009 -0400"
      },
      "message": "mac80211: cancel/restart all timers across suspend/resume\n\nWe forgot to cancel all timers in mac80211 when suspending.\nIn particular we forgot to deal with some things that can\ncause hardware reconfiguration -- while it is down.\n\nWhile at it we go ahead and add a warning in ieee80211_sta_work()\nif its run while the suspend-\u003eresume cycle is in effect. This\nshould not happen and if it does it would indicate there is\na bug lurking in either mac80211 or mac80211 drivers.\n\nWith this now wpa_supplicant doesn\u0027t blink when I go to suspend\nand resume where as before there where issues with some timers\nrunning during the suspend-\u003eresume cycle. This caused a lot of\nincorrect assumptions and would at times bring back the device\nin an incoherent, but mostly recoverable, state.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "99c84cb0692729088788d8e1d1cee670154176e4",
      "tree": "b305885cdec6c31ebc27332526419957f4d27715",
      "parents": [
        "f2ca3ea484a51dc7ea5b738510fd03cb6ca7e2e2"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Fri May 08 14:12:21 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon May 11 15:23:56 2009 -0400"
      },
      "message": "mac80211: improve scan timing\n\nThe call to ieee80211_hw_config() is supposed to apply changes\nsynchronously, so once it returns the parameters are applied to\nthe hardware. Thus, there really is no need to delay the probing\nby the channel switch time again since the channel switch has\nalready happened once we get to this code.\n\nAdditionally, there is no need to wait for a NAV update (probe\ndelay) when the channel is passively scanned. Remove that extra\ntime too.\n\nThis cuts scanning time from over 7 seconds to under 4 on ar9170,\nwhich is due to the number of channels scanned and ar9170\u0027s switch\ntime being advertised as 135ms (my test now indicates it is about\n77ms with the current driver, but the difference might also be due\nto using a different machine with different USB controllers).\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "58905ca5b11a0ff3860f55b789cbbf052f7158a7",
      "tree": "7c7a4c937130855dfef41c2302deb7fb0b5a2eb7",
      "parents": [
        "02018b39a75057541c7946a9173561d1a76a0bfe"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Thu May 07 14:23:01 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon May 11 15:23:54 2009 -0400"
      },
      "message": "mac80211: fix scan channel race\n\nWhen a software scan starts, it first sets sw_scanning, but\nleaves the scan_channel \"unset\" (it currently actually gets\ninitialised to a default). Now, when something else tries\nto (re)configure the hardware in the window between these two\nevents (after sw_scanning \u003d true, but before scan_channel is\nset), the current code switches to the (unset!) scan_channel.\nThis causes trouble, especially when switching bands and\nsending frames on the wrong channel.\n\nTo work around this, leave scan_channel initialised to NULL\nand use it to determine whether or not a switch to a different\nchannel should occur (and also use the same condition to check\nwhether to adjust power for scan or not).\n\nAdditionally, avoid reconfiguring the hardware completely when\nrecalculating idle resulted in no changes, this was the problem\nthat originally led us to discover the race condition in the\nfirst place, which was helpfully bisected by Pavel. This part\nof the patch should not be necessary with the other fixes, but\nnot calling the ieee80211_hw_config function when we know it to\nbe unnecessary is certainly a correct thing to do.\n\nUnfortunately, this patch cannot and does not fix the race\ncondition completely, but due to the way the scan code is\nstructured it makes the particular problem Pavel discovered\n(race while changing channel at the same time as transmitting\nframes) go away. To fix it completely, more work especially\nwith locking configuration is needed.\n\nBisected-by: Pavel Roskin \u003cproski@gnu.org\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "5cff20e6c5a6591a79d3b027af222870f52bb550",
      "tree": "81b6ebb75c1dc87b65258e71526c1581d168156c",
      "parents": [
        "9955151df7c6452cae2ed9649f53d265c91cf155"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Wed Apr 29 12:26:17 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed May 06 15:14:51 2009 -0400"
      },
      "message": "mac80211: tell driver when idle\n\nWhen we aren\u0027t doing anything in mac80211, we can turn off\nmuch of the hardware, depending on the driver/hw. Not doing\nanything, aka being idle, means:\n\n * no monitor interfaces\n * no AP/mesh/wds interfaces\n * any station interfaces are in DISABLED state\n * any IBSS interfaces aren\u0027t trying to be in a network\n * we aren\u0027t trying to scan\n\nBy creating a new function that verifies these conditions and calling\nit at strategic points where the states of those conditions change,\nwe can easily make mac80211 tell the driver when we are idle to save\npower.\n\nAdditionally, this fixes a small quirk where a recalculated powersave\nstate is passed to the driver even if the hardware is about to stopped\ncompletely.\n\nThis patch intentionally doesn\u0027t touch radio_enabled because that is\ncurrently implemented to be a soft rfkill which is inappropriate here\nwhen we need to be able to wake up with low latency.\n\nOne thing I\u0027m not entirely sure about is this:\n\n  phy0: device no longer idle - in use\n  wlan0: direct probe to AP 00:11:24:91:07:4d try 1\n  wlan0 direct probe responded\n  wlan0: authenticate with AP 00:11:24:91:07:4d\n  wlan0: authenticated\n\u003e phy0: device now idle\n\u003e phy0: device no longer idle - in use\n  wlan0: associate with AP 00:11:24:91:07:4d\n  wlan0: RX AssocResp from 00:11:24:91:07:4d (capab\u003d0x401 status\u003d0 aid\u003d1)\n  wlan0: associated\n\nIs it appropriate to go into idle state for a short time when we have\njust authenticated, but not associated yet? This happens only with the\nuserspace SME, because we cannot really know how long it will wait\nbefore asking us to associate. Would going idle after a short timeout\nbe more appropriate? We may need to revisit this, depending on what\nhappens.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "2448798133d747ad339e57099e32a1d1e68aca1c",
      "tree": "ee09385f5dca9e243c38f5f888baa02605423bd7",
      "parents": [
        "2d0ddec5b2b859f06116f631fc0ffe94fbceb556"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Thu Apr 23 18:52:52 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed May 06 15:14:37 2009 -0400"
      },
      "message": "mac80211: add driver ops wrappers\n\nIn order to later add tracing or verifications to the driver\ncalls mac80211 makes, this patch adds static inline wrappers\nfor all operations.\n\nAll calls are now written as\n\n\tdrv_\u003cop\u003e(local, ...);\n\ninstead of\n\n\tlocal-\u003eops-\u003e\u003cop\u003e(\u0026local-\u003ehw, ...);\n\nWhere necessary, the wrappers also do existence checking and\nreturn default values as appropriate.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "2d0ddec5b2b859f06116f631fc0ffe94fbceb556",
      "tree": "9bf3cdfcbbefcb34f5984e6d797f488ebe358196",
      "parents": [
        "57c4d7b4c4986037be51476b8e3025d5ba18d8b8"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Thu Apr 23 16:13:26 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed May 06 15:14:36 2009 -0400"
      },
      "message": "mac80211: unify config_interface and bss_info_changed\n\nThe config_interface method is a little strange, it contains the\nBSSID and beacon updates, while bss_info_changed contains most\nother BSS information for each interface. This patch removes\nconfig_interface and rolls all the information it previously\npassed to drivers into bss_info_changed.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "f3b85252f081581a8f257545ed748062dce7798b",
      "tree": "899a804545850c7e1b1e3eea5c743df2c8cddf3d",
      "parents": [
        "2d72289095e9621158acf1d59a830cfe920fa93b"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Thu Apr 23 16:01:47 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed May 06 15:14:31 2009 -0400"
      },
      "message": "mac80211: fix scan races and rework scanning\n\nThere are some places marked\n\t/* XXX maybe racy? */\nand they really are racy because there\u0027s no locking.\n\nThis patch reworks much of the scan code, and introduces proper\nlocking for the scan request as well as the internal scanning\n(which is necessary for IBSS/managed modes). Helper functions\nare added to call the scanning code whenever necessary. The\nscan deferring is changed to simply queue the scanning work\ninstead of trying to start the scan in place, the scanning work\nwill then take care of the rest.\n\nAlso, currently when internal scans are requested for an interface\nthat is trying to associate, we reject such scans. This was not\nintended, the mlme code has provisions to scan twice when it can\u0027t\nfind the BSS to associate with right away; this has never worked\nproperly. Fix this by not rejecting internal scan requests for an\ninterface that is associating.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "af8cdcd828ad751fae8e6cbfe94eef9f2f23b14b",
      "tree": "7a00a19c976abbeba16bd04ddc177b6332057c98",
      "parents": [
        "04a773ade0680d862b479d7219973df60f7a3834"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Sun Apr 19 21:25:43 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Apr 22 16:57:17 2009 -0400"
      },
      "message": "mac80211: convert to cfg80211 IBSS API\n\nThis converts mac80211 to the new cfg80211 IBSS API, the\nwext handling functions are called where appropriate.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "965bedadc01d34027455d5d5b67063ef0209c955",
      "tree": "012bb04559011498e0bdb5db1ba6ffad0ec8b89a",
      "parents": [
        "dc7d243d75b906cc964c12caa3b2eebe953a69be"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Thu Apr 16 13:17:24 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Apr 22 16:57:15 2009 -0400"
      },
      "message": "mac80211: improve powersave implementation\n\nWhen you have multiple virtual interfaces the current\nimplementation requires setting them up properly from\nuserspace, which is undesirable when we want to default\nto power save mode. Keep track of powersave requested\nfrom userspace per managed mode interface, and only\nenable powersave globally when exactly one managed mode\ninterface is active and has powersave turned on.\n\nSecond, only start the dynPS timer when PS is turned\non, and properly turn it off when PS is turned off.\n\nThird, fix the scan_sdata abuse in the dynps code.\n\nFinally, also reorder the code and refactor the code\nthat enables PS or the dynps timer instead of having\nit copied in two places.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "de95a54b1aebe5592cae971ca5e5d9ec6a381a17",
      "tree": "55a622d1e61e73cd6426c5e0643ac9fd117a9fe8",
      "parents": [
        "18a8365992a8041aa178ae9ad5f0d951d0457230"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Wed Apr 01 11:58:36 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Apr 22 16:54:39 2009 -0400"
      },
      "message": "mac80211: pass all probe request IEs to driver\n\nInstead of just passing the cfg80211-requested IEs, pass\nthe locally generated ones as well.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "9050bdd8589c373e01e41ddbd9a192de2ff01ef0",
      "tree": "a33c69c570d6db96bb54bb3b4b3eb5ea4b43d5ea",
      "parents": [
        "15b7b0629c8213905926394dc73d600e0ca250ce"
      ],
      "author": {
        "name": "Kalle Valo",
        "email": "kalle.valo@nokia.com",
        "time": "Sun Mar 22 21:57:21 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Mar 27 20:13:12 2009 -0400"
      },
      "message": "mac80211: disable power save when scanning\n\nWhen software scanning we need to disable power save so that all possible\nprobe responses and beacons are received. For hardware scanning assume that\nhardware will take care of that and document that assumption.\n\nSigned-off-by: Kalle Valo \u003ckalle.valo@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "a9a6ffffd05f97e6acbdeafc595e269855829751",
      "tree": "8e10fab859b4a8e097f333080f92b2b8ae0fef76",
      "parents": [
        "43da9192326a4499b5faf737c3636f25b56b53e0"
      ],
      "author": {
        "name": "Kalle Valo",
        "email": "kalle.valo@nokia.com",
        "time": "Wed Mar 18 14:06:44 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Mar 27 20:13:00 2009 -0400"
      },
      "message": "mac80211: don\u0027t drop nullfunc frames during software scan\n\nieee80211_tx_h_check_assoc() was dropping everything else than probe\nrequests during software scan. So the nullfunc frame with the power save\nbit was dropped and AP never received it. This meant that AP never\nbuffered any frames for the station during software scan.\n\nFix this by allowing to transmit both probe request and nullfunc frames\nduring software scan. Tested with stlc45xx.\n\nSigned-off-by: Kalle Valo \u003ckalle.valo@nokia.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "af88b9078d4aa31d667d2d82601ede9cae3bac37",
      "tree": "afd9528736ecaf17eb1628be08abead2fee699f7",
      "parents": [
        "8830cb678b13004ab54f606345769f1e74e378c6"
      ],
      "author": {
        "name": "Helmut Schaa",
        "email": "helmut.schaa@googlemail.com",
        "time": "Mon Mar 09 15:47:08 2009 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Mar 16 18:09:38 2009 -0400"
      },
      "message": "mac80211: handle failed scan requests in STA mode\n\nIf cfg80211 requests a scan it awaits either a return code !\u003d 0 from\nthe scan function or the cfg80211_scan_done to be called. In case of\na STA mac80211\u0027s scan function ever returns 0 and queues the scan request.\nIf ieee80211_sta_work is executed and ieee80211_start_scan fails for\nsome reason cfg80211_scan_done will never be called but cfg80211 still\nthinks the scan was triggered successfully and will refuse any future\nscan requests due to drv-\u003escan_req not being cleaned up.\n\nIf a scan is triggered from within the MLME a similar problem appears. If\nieee80211_start_scan returns an error, local-\u003escan_req will not be reset\nand mac80211 will refuse any future scan requests.\n\nHence, in both cases call ieee80211_scan_failed (which notifies cfg80211\nand resets local-\u003escan_req) if ieee80211_start_scan returns an error.\n\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "80e775bf08f1915870fbb0c1c7a45a3fdc291721",
      "tree": "117d475755d5f4f0aba17f9efce8fa4fd51d0d10",
      "parents": [
        "8821905cfb65504f64e6beb014133bd2a998f5dc"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Fri Feb 20 15:37:03 2009 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Feb 27 14:52:51 2009 -0500"
      },
      "message": "mac80211: Add software scan notifiers\n\nThis adds optional notifier functions for software scan.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "77965c970d7da9c9b6349ff2b1d9adecf54c403b",
      "tree": "bda8a85fa872a46d5cb5c48891cf3ee21c91e838",
      "parents": [
        "630e64c487c0a9550f05b465216a1cd9125b52f2"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Wed Feb 18 18:45:06 2009 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Feb 27 14:52:42 2009 -0500"
      },
      "message": "cfg80211: clean up signal type\n\nIt wasn\u0027t a good idea to make the signal type a per-BSS option,\nalthough then it is closer to the actual value. Move it to be\na per-wiphy setting, update mac80211 to match.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "70692ad2923a379e0a10f9ec2ad93fbbe084cc46",
      "tree": "f67488c396ea6e61f71e0199eea189ea939a698b",
      "parents": [
        "83befbde839b1deb0cd752a834ffd9fde8571ae2"
      ],
      "author": {
        "name": "Jouni Malinen",
        "email": "jouni.malinen@atheros.com",
        "time": "Mon Feb 16 19:39:13 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Feb 27 14:52:38 2009 -0500"
      },
      "message": "nl80211: Optional IEs into scan request\n\nThis extends the NL80211_CMD_TRIGGER_SCAN command to allow applications\nto specify a set of information element(s) to be added into Probe\nRequest frames with NL80211_ATTR_IE. This provides support for the\nMLME-SCAN.request primitive parameter VendorSpecificInfo and can be\nused, e.g., to implement WPS scanning.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "469002983fc90c2ff0959e2b03335c0fe2e4d5a9",
      "tree": "fdcf78dcdaeadba897abd86d39d0275e236803b3",
      "parents": [
        "96f5e66e8a79810e2982cdcfa28e554f3d97da21"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Sun Feb 15 12:44:28 2009 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Feb 27 14:51:42 2009 -0500"
      },
      "message": "mac80211: split IBSS/managed code\n\nThis patch splits out the ibss code and data from managed (station) mode.\nThe reason to do this is to better separate the state machines, and have\nthe code be contained better so it gets easier to determine what exactly\na given change will affect, that in turn makes it easier to understand.\n\nThis is quite some churn, especially because I split sdata-\u003eu.sta into\nsdata-\u003eu.mgd and sdata-\u003eu.ibss, but I think it\u0027s easier to maintain that\nway. I\u0027ve also shuffled around some code -- null function sending is only\napplicable to managed interfaces so put that into that file, some other\nfunctions are needed from various places so put them into util, and also\nrearranged the prototypes in ieee80211_i.h accordingly.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "00d3f14cf9f12c21428121026a5e1d5f65926447",
      "tree": "e5f355deef7b9ebb5b3bf65f9d589bd2a1cfbafa",
      "parents": [
        "79420f09e76e8e1dd1149d6ce9c20e06cbb5802a"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Tue Feb 10 21:26:00 2009 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Feb 13 13:45:58 2009 -0500"
      },
      "message": "mac80211: use cfg80211s BSS infrastructure\n\nRemove all the code from mac80211 to keep track of BSSes\nand use the cfg80211-provided code completely.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "99cf5f5f3571ce3a837e379d3b87bf5ddf54f17d",
      "tree": "cde967301cfcb781d1427112b40b7f7061d2df70",
      "parents": [
        "2a5193119269062608582418deba7af82844159a"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Tue Feb 10 21:25:56 2009 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Feb 13 13:45:51 2009 -0500"
      },
      "message": "mac80211: dont add BSS when creating IBSS\n\nThere\u0027s no need to create a BSS struct only to pass it to\nieee80211_sta_join_ibss, so refactor this function into\n__ieee80211_sta_join_ibss which takes all the relevant\nparamters, and ieee80211_sta_join_ibss which takes a BSS\nstruct (used when joining an IBSS that already has other\nmembers).\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "2a5193119269062608582418deba7af82844159a",
      "tree": "1f2fe8cffbeb7530dce7fa708310f6fb29ab0dd8",
      "parents": [
        "849b7967818995a32c3017542e33eb3155944368"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Tue Feb 10 21:25:55 2009 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Feb 13 13:45:49 2009 -0500"
      },
      "message": "cfg80211/nl80211: scanning (and mac80211 update to use it)\n\nThis patch adds basic scan capability to cfg80211/nl80211 and\nchanges mac80211 to use it. The BSS list that cfg80211 maintains\nis made driver-accessible with a private area in each BSS struct,\nbut mac80211 doesn\u0027t yet use it. That\u0027s another large project.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "14b80724367dfdc86f4807461dd1f7f2dd630416",
      "tree": "2a1050703b8ccf73dbf5fb3b7c777997fba5a437",
      "parents": [
        "60b22511921fe79b2a94a27c09cadfd32fcef5d5"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Tue Feb 10 21:25:42 2009 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Feb 13 13:45:27 2009 -0500"
      },
      "message": "mac80211: fix beacon enable more\n\nHopefully the last required fix ... disable beaconing\nonly on beaconing interfaces, and thus avoid calling\nieee80211_if_config for purely virtual interfaces\n(those driver doesn\u0027t know about).\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "7a9470806053f765ecf7f3932acb4c95c204ad4b",
      "tree": "0e0e2110f221babd6fbdb289f3056436fca101b1",
      "parents": [
        "029bc43270e770e0d57d67dc431fe711c58e74f5"
      ],
      "author": {
        "name": "Vasanthakumar Thiagarajan",
        "email": "vasanth@atheros.com",
        "time": "Wed Feb 04 18:28:48 2009 +0530"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Feb 11 11:44:23 2009 -0500"
      },
      "message": "mac80211: Free current bss information in few places where we don\u0027t need it any more\n\nSigned-off-by: Vasanthakumar Thiagarajan \u003cvasanth@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "fb9ddbf086591ab4c90c44d10468f84d465b3fdf",
      "tree": "6663ce9105a08c7368a17408e377841e4400adf1",
      "parents": [
        "d81c2d9c909e95ee8a5745da95bbb35f8ded3d17"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Mon Jan 26 19:11:57 2009 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Thu Jan 29 16:01:50 2009 -0500"
      },
      "message": "mac80211: don\u0027t try to powersave/config disabled interfaces\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "078e1e60dd6c6b0d4bc8d58ccb80c008e8efc9ff",
      "tree": "7fa2580b76a5693a37449e9cc075eee2394bb0c3",
      "parents": [
        "07c1e852514e862e246b9f2962ce8fc0d7ac8ed1"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Thu Jan 22 18:07:31 2009 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Thu Jan 29 16:01:13 2009 -0500"
      },
      "message": "mac80211: Add capability to enable/disable beaconing\n\nThis patch adds a flag to notify drivers to start and stop\nbeaconing when needed, for example, during a scan run. Based\non Sujith\u0027s first patch to do the same, but now disables\nbeaconing for all virtual interfaces while scanning, has a\nseparate change flag and tracks user-space requests.\n\nSigned-off-by: Sujith \u003cSujith.Manoharan@atheros.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "a97b77b90decf27a86ac40ea53a741ffb5ead21a",
      "tree": "4c5f61d6df51613fdde42ce7d9eb76b352ed2141",
      "parents": [
        "869717fbe43eb831cbebd03a9a66a4a4c3b406a9"
      ],
      "author": {
        "name": "Vivek Natarajan",
        "email": "vivek.natraj@gmail.com",
        "time": "Tue Dec 23 18:39:02 2008 -0800"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Thu Jan 29 15:58:49 2009 -0500"
      },
      "message": "mac80211: Enhancements to dynamic power save.\n\nThis patch enables mac80211 to send a null frame and also to\ncheck for tim in the beacon if dynamic power save is enabled.\n\nSigned-off-by: Vivek Natarajan \u003cvnatarajan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "1239cd58d237fa6ad501acaec8776262a5784ec8",
      "tree": "13f991cfc6a77e52a336aa75a94d94f5fd919f68",
      "parents": [
        "97c8b013da7a8ec7aa0a192489d4e7a33c4127fc"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Tue Oct 28 11:12:57 2008 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Nov 10 15:10:16 2008 -0500"
      },
      "message": "wireless: move mesh config length constant\n\nThis is a constant from the 802.11 specification.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nCc: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "e8975581f63870be42ff4662b293d1b0c8c21350",
      "tree": "3d0d67e73d009ea6480b459585c0a70fc35fa9da",
      "parents": [
        "0f4ac38b5999c3d51adad52d61c56c1b99c247ec"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Thu Oct 09 12:18:51 2008 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Oct 31 19:00:07 2008 -0400"
      },
      "message": "mac80211: introduce hw config change flags\n\nThis makes mac80211 notify the driver which configuration\nactually changed, e.g. channel etc.\n\nNo driver changes, this is just plumbing, driver authors are\nexpected to act on this if they want to.\n\nAlso remove the HW CONFIG debug printk, it\u0027s incorrect, often\nwe configure something else.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "d73782fdde76554016abf73b46f843b29f520848",
      "tree": "9b57321ce60ba336dfea63501b1d23d21c700817",
      "parents": [
        "3db594380b8452eda4d88b12844077809607caaa"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Tue Oct 07 12:04:34 2008 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Oct 31 18:06:00 2008 -0400"
      },
      "message": "mac80211: clean up ieee80211_hw_config errors\n\nWarn when ieee80211_hw_config returns an error, it shouldn\u0027t\nhappen; remove a number of printks that would happen in such\na case and one printk that is user-triggerable.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "d048e503a2b01e771ee87921c24d89d7ec3f0c2f",
      "tree": "71df617d24f8ba4cc349b3588e9ee87a5b891b7a",
      "parents": [
        "c25bab54fe30d26a2cddf7058d77da72be630b23"
      ],
      "author": {
        "name": "Jouni Malinen",
        "email": "j@w1.fi",
        "time": "Sat Oct 11 03:29:55 2008 +0300"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Oct 14 21:08:11 2008 -0400"
      },
      "message": "mac80211: Fix scan RX processing oops\n\nieee80211_bss_info_update() can return NULL. Verify that this is not the\ncase before calling ieee802111_rx_bss_put() which would trigger an oops\nin interrupt context in atomic_dec_and_lock().\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nAcked-by: Benoit Papillault \u003cbenoit.papillault@free.fr\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "05c914fe330fa8e1cc67870dc0d3809dfd96c107",
      "tree": "df53bcab47335f3361c09478d6b1447b7d298536",
      "parents": [
        "96dd22ac06b0dbfb069fdf530c72046a941e9694"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Thu Sep 11 00:01:58 2008 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Sep 15 16:48:23 2008 -0400"
      },
      "message": "mac80211: use nl80211 interface types\n\nThere\u0027s really no reason for mac80211 to be using its\nown interface type defines. Use the nl80211 types and\nsimplify the configuration code a bit: there\u0027s no need\nto translate them any more now.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "c2b13452b283f9c4a5b02a6b53ed6416ebf4c03c",
      "tree": "756b8c9668c643293a46389b8b8f34b8efd3d2ea",
      "parents": [
        "213cd118cbb88b76ae48f92cfb7dbef9a83cca62"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Thu Sep 11 00:01:55 2008 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Sep 15 16:48:22 2008 -0400"
      },
      "message": "mac80211: clean up scan namespace\n\nMost of the scan functions are called ieee80211_sta_scan_*\nor similar, make clean it up so they are all just called\nieee80211_scan_*.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "5bc75728fd43bb15b46f16ef465bcf9d487393cf",
      "tree": "5732adee3965970390bf7953d214c757bbdba2a2",
      "parents": [
        "b7413430d4d2a6168e68231d9f93763047b6d60c"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Thu Sep 11 00:01:51 2008 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Sep 15 16:48:20 2008 -0400"
      },
      "message": "mac80211: fix scan vs. interface removal race\n\nWhen we remove an interface, we can currently end up having\na pointer to it left in local-\u003escan_sdata after it has been\nset down, and then with a hardware scan the scan completion\ncan try to access it which is a bug. Alternatively, a scan\nthat started as a hardware scan may terminate as though it\nwas a software scan, if the timing is just right.\n\nOn SMP systems, software scan also has a similar problem,\njust canceling the delayed work and setting a flag isn\u0027t\nenough since it may be running concurrently; in this case\nwe would also never restore state of other interfaces.\n\nThis patch hopefully fixes the problems by always invoking\nieee80211_scan_completed or requiring it to be invoked by\nthe driver, I suspect the drivers that have -\u003ehw_scan() are\nbuggy. The bug will not manifest itself unless you remove\nthe interface while hw-scanning which will also turn off\nthe hw, and then add a new interface which will be unusable\nuntil you scan once.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "472dbc45dc1966284de72d7de15690c17ed2cf33",
      "tree": "e8bfb88067f7fd8845978d1613f868e6a4499999",
      "parents": [
        "7c95069522d02ff144cd421be6618dce619caf7e"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Thu Sep 11 00:01:49 2008 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Sep 15 16:48:20 2008 -0400"
      },
      "message": "mac80211: split off mesh handling entirely\n\nThis patch splits off mesh handling from the STA/IBSS.\nUnfortunately it increases mesh code size a bit, but I\nthink it makes things clearer. The patch also reduces\nper-interface run-time memory usage.\n\nAlso clean up a few places where ifdef is not required.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "a1678f84bff9b20807f7f6a45ebfb56a0c02b353",
      "tree": "c4cefdbdc3befef29f3253a575760535430b0809",
      "parents": [
        "24723d1bc9da79a53d0495b9cf9ee18747121b03"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Thu Sep 11 00:01:47 2008 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Sep 15 16:48:20 2008 -0400"
      },
      "message": "mac80211: move STA timer restart\n\nThis I shouldn\u0027t have moved to the scan implementation, move\nit back to the MLME where it belongs, to the notification.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "e50db65c0dad109aae77c353305853b31555b228",
      "tree": "1c7f765e172092e2d6d0e63a1faa13c004f79c7a",
      "parents": [
        "759ef3eb1eeba8ff7411771e7b9cf6bfd6bb9cfe"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Tue Sep 09 15:07:09 2008 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Thu Sep 11 15:53:39 2008 -0400"
      },
      "message": "mac80211: move frame TX function\n\nThe ieee80211_sta_tx function isn\u0027t MLME code any more,\nit\u0027s getting used by a lot of code. Move it to utils and\nrename it to ieee80211_tx_skb.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "9116dd01120e249dc2e84e6edecd7ad7f828680f",
      "tree": "e08ccb8239f9130dcf2fc0e27b4d97151dac9238",
      "parents": [
        "bacac545f10f2bf6e5ceff0d8e2b82dfc493602a"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Mon Sep 08 17:47:23 2008 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Thu Sep 11 15:53:37 2008 -0400"
      },
      "message": "mac80211: clarify scan request\n\nWhen a scan is requested for non-STA interfaces, we simply fire\noff a scan, but for STA interfaces we shouldn\u0027t because they\ncould be in the middle of an association. This clarifies the\ncorresponding code.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "5484e23749e78d5a4f56928efaf3c4b0d862b7a6",
      "tree": "ccfcde072487419d0bf32a88bc8314380d17f1bf",
      "parents": [
        "98c8fccfaea838e62ffde2f2e44568844e0e5472"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Mon Sep 08 17:44:27 2008 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Thu Sep 11 15:53:37 2008 -0400"
      },
      "message": "mac80211: move BSS handling to scan code\n\nThis moves all the BSS list handling out of mlme.c to scan.c,\nno further changes except fixing kzalloc/atomic_inc/atomic_inc\nto kzalloc/atomic_set(2).\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "98c8fccfaea838e62ffde2f2e44568844e0e5472",
      "tree": "c69552d4be03dd8321b6f90b3fbb17c607fa9940",
      "parents": [
        "0a51b27e956bd9580296c48191b78175ed8b5971"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Mon Sep 08 17:44:26 2008 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Thu Sep 11 15:53:37 2008 -0400"
      },
      "message": "mac80211: refactor and move scan RX code\n\nThis patch refactors some code and moves the scan RX function\nto scan.c. More importantly, however, it changes it so that the\nMLME\u0027s beacon/probe_resp functions aren\u0027t invoked when scanning\nso that we can remove a \"if (scanning)\" conditions from two\nplaces.\n\nThere\u0027s a very slight behavioural change in this patch: now,\nwhen scanning, IBSS and mesh aren\u0027t updated even on the same\nchannel.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "0a51b27e956bd9580296c48191b78175ed8b5971",
      "tree": "fd48f13e3f8eb75675c1c8d32c7214df2af47814",
      "parents": [
        "ee96d6ef82cc29421569b7cb7f7c7ee90168ec50"
      ],
      "author": {
        "name": "Johannes Berg",
        "email": "johannes@sipsolutions.net",
        "time": "Mon Sep 08 17:44:25 2008 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Thu Sep 11 15:53:36 2008 -0400"
      },
      "message": "mac80211: start moving scan code from mlme\n\nHere\u0027s a first patch to move some code from mlme.c to a\nnew file called scan.c. The end result will hopefully be\na more manageable mlme.c.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    }
  ]
}