)]}' { "log": [ { "commit": "92a67df500a1df1c0d6fa941a136daa104f5d535", "tree": "fe68a9e4d43531f2b74b78652bd7ff49522cb72a", "parents": [ "722978c40a0aefefcaa3bdd9ca72a8aaa876e613" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Mon Jun 25 13:56:24 2012 -0600" }, "committer": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Tue Jul 03 14:44:58 2012 -0600" }, "message": "tty: n_smux: Prevent TTY Line Discipline unload during flush\n\nHold mutex lock while flushing TTY to avoid race condition with\nunloading the line discipline.\n\nChange-Id: I2327be9bd39119d14c3e607e8ace201d51755e08\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "e940d26a3bbf846a824bd841235e5b6040be2e8f", "tree": "cd996ec478d9fef749de980be52c4e8b1a0ea11d", "parents": [ "0755fd03c93894a743846dda115a0cb78cbcf689", "079867153fcd3f05bd17847109271a621f1a7aaf" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 03 06:43:25 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 03 06:43:25 2012 -0700" }, "message": "Merge changes Iab9e4fa9,I5a31a982,I3213306f into msm-3.4\n\n* changes:\n tty: smux_ctl: Remove unused ports\n tty: smux_ctl: Disable debug logging\n tty: smux_ctl: Support removing line discipline gracefully\n" }, { "commit": "0755fd03c93894a743846dda115a0cb78cbcf689", "tree": "9ec9974f6107b9ec5d791df5cd2e23761124d0e5", "parents": [ "35671962aefd84662171cf94b1d147915138cb97", "84f8c68bcd73f8bcd1af23b126ed052eb1598856" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 03 06:43:21 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 03 06:43:21 2012 -0700" }, "message": "Merge \"vidc: Add required variables in platform data for content protection\" into msm-3.4" }, { "commit": "35671962aefd84662171cf94b1d147915138cb97", "tree": "4a8ba9fada1e1e8872303b4028d095e804568c1b", "parents": [ "1dd15a41a850a4c959b8f46336d1dd5ebe2a1686", "cb06807f0ca2de9c97350cb6f5d4fdcf99d20df4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 03 06:43:17 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 03 06:43:17 2012 -0700" }, "message": "Merge \"msm: kgsl: Disable the IOMMU clocks on a timestamp\" into msm-3.4" }, { "commit": "1dd15a41a850a4c959b8f46336d1dd5ebe2a1686", "tree": "48f357c2b4d55182fa47afbd9327451bf7f6c705", "parents": [ "cc761c3a11bd0c887b8f25288655019679ad8a40", "24502cb2cfd176d72cc6884dbeb375c7fb054766" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 03 05:04:50 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 03 05:04:51 2012 -0700" }, "message": "Merge \"msm_fb: display: Enable MDP clock\u0027s overlay block during panel on\" into msm-3.4" }, { "commit": "22d8bf0ffbe23bfd808ed375c8379d120f1983ec", "tree": "011f236135fc1b6b431eeb255d6f4e9f0bbf69fe", "parents": [ "5b17dcfd1126e147c0c4f0acbddeac4b049ee5e1", "824b752edbef5adebbf3db94cb2a1b792d25e2e6" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 03 05:04:35 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 03 05:04:35 2012 -0700" }, "message": "Merge \"arm/dt: msm8974: add support for SD/eMMC bus speed modes\" into msm-3.4" }, { "commit": "5b17dcfd1126e147c0c4f0acbddeac4b049ee5e1", "tree": "8ffdd8ac5f04dec53597aa22f21e2db6ba333144", "parents": [ "b46d16447f42ef0f47d91bbb5b1cbb5af3b09796", "4018a9b5281e1c8bc41c3d54ff8d6d7c866434d0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 03 03:34:45 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 03 03:34:45 2012 -0700" }, "message": "Merge \"msm: kgsl: Align busy times with the end times of samples\" into msm-3.4" }, { "commit": "fc9ee15a1595355f4661ed6833ba027008939bd2", "tree": "c9334e687fb0a7d9fa171c2bfe54fa5b6d71c485", "parents": [ "2e3b3789fa849088bafdfb921dbe06e19ba215b2", "5e96aaa4c667b34b354a100cbe7b0c3da01cc3d4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 03 03:34:39 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 03 03:34:39 2012 -0700" }, "message": "Merge \"power: pm8921-charger: support dc charging while in usb host mode\" into msm-3.4" }, { "commit": "cb06807f0ca2de9c97350cb6f5d4fdcf99d20df4", "tree": "88aacffe33a6ce18292f593d15cbc5f14af5ab95", "parents": [ "748e710ed0fcb347e8c0b63607a20b8d951e5fa1" ], "author": { "name": "Shubhraprakash Das", "email": "sadas@codeaurora.org", "time": "Thu Jun 07 17:52:41 2012 -0600" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 03 03:16:21 2012 -0600" }, "message": "msm: kgsl: Disable the IOMMU clocks on a timestamp\n\nAdd a function which adds an event to disable the iommu clocks\nbased on a timestamp. If timestamp elapses then the event function\nwill disable the iommu clocks. Remove the disabling of iommu clocks\nfrom the power control code.\n\nChange-Id: Ic1263771f8c532131059283dde05425a73554974\nSigned-off-by: Shubhraprakash Das \u003csadas@codeaurora.org\u003e\n" }, { "commit": "dcb3c554f9dff1a80b42719ffd7cd8ff33615caf", "tree": "c2402b234f461e033432612bb9f0f37d48c86bed", "parents": [ "da10f9626e33428f8c2d17b786eab1720ae73222", "995fd27825c1bb27f0bfa76d4a887dc00cd0f1eb" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 03 02:10:12 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 03 02:10:12 2012 -0700" }, "message": "Merge \"msm_vidc: Fix decoder output order.\" into msm-3.4" }, { "commit": "da10f9626e33428f8c2d17b786eab1720ae73222", "tree": "57c599a235512d2fbf6cf2e37151fb31090d015a", "parents": [ "3a2325989cadf80af74ad0f7b6067ab87468a9f3", "b9ff7f0d6a09bf70d357746b9c212b99ea40932d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 03 02:10:08 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 03 02:10:08 2012 -0700" }, "message": "Merge \"arm/dt: msm8974: Add regulator support for SDC controllers\" into msm-3.4" }, { "commit": "84f8c68bcd73f8bcd1af23b126ed052eb1598856", "tree": "bc15b0f204c2ae30ccfc7181dcc2a1bd8deb9086", "parents": [ "748e710ed0fcb347e8c0b63607a20b8d951e5fa1" ], "author": { "name": "Riaz Rahaman", "email": "riazr@codeaurora.org", "time": "Wed May 30 13:32:10 2012 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 03 01:37:05 2012 -0600" }, "message": "vidc: Add required variables in platform data for content protection\n\nAdd, initialize variables for firmware addr \u0026 secure write back\nbuffers in vidc platform data.\n\nChange-Id: Ibb1e464af2e0e9038c8d43d6756d5a8481c7f618\nSigned-off-by: Riaz Ur Rahaman \u003criazr@codeaurora.org\u003e\n" }, { "commit": "24502cb2cfd176d72cc6884dbeb375c7fb054766", "tree": "e7d605277fd6e2be9bdc6671f07f8ff2b58d3078", "parents": [ "9ef6e99245ce025573941615121996dca415e408" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Mon Jun 25 18:58:45 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 03 00:06:31 2012 -0600" }, "message": "msm_fb: display: Enable MDP clock\u0027s overlay block during panel on\n\nMDP clock\u0027s overlay block is enabled during first update after panel\non currently. This is now moved to panel on to keep clock enabled\nright from display on time.\n\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\nChange-Id: Ie201186c1471201874f2eff246486bc4a73b5872\n" }, { "commit": "748e710ed0fcb347e8c0b63607a20b8d951e5fa1", "tree": "2fd06f5fd8819cc0db7ced6626c495107558b3a8", "parents": [ "e8f865eea0ba93cbe3183c443f98c07c8f41b1cd", "305c529189ab0adfbefec1ff03f246a8b7471244" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 02 22:59:33 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 02 22:59:33 2012 -0700" }, "message": "Merge \"power: pm8xxx-ccadc: remove support for pm8921 v1.0 and v1.1\" into msm-3.4" }, { "commit": "e8f865eea0ba93cbe3183c443f98c07c8f41b1cd", "tree": "19cc8599e0aba6c89aa6476aa656b26feb048381", "parents": [ "9ef6e99245ce025573941615121996dca415e408", "3ac0c174b21293d50773bb8b2bc5ad9ee2aedf23" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 02 22:59:29 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 02 22:59:29 2012 -0700" }, "message": "Merge \"msm_fb: display: Fix Toshiba WSVGA panel porch and timing settings\" into msm-3.4" }, { "commit": "9ef6e99245ce025573941615121996dca415e408", "tree": "ff442218bef3b5f191b0a624e34143884596dd0f", "parents": [ "6d593667a97b3587a1be0be1dcce536e12dc59a0", "a9f11565a15ded0fac8964162d6866a8f217e2f7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 02 21:01:55 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 02 21:01:55 2012 -0700" }, "message": "Merge changes I8c826faa,I8a04c58b into msm-3.4\n\n* changes:\n X86: integrate CMA with DMA-mapping subsystem\n drivers: add Contiguous Memory Allocator\n" }, { "commit": "12b2d00f7c4f4ba4eacf1cbfbd2e1046f4bbf305", "tree": "b43b86eaab23bb4e5ccf20a2f3267a668069b3f5", "parents": [ "3ff742d2e3c02848e8572badaa7a200334354b23", "07876121525c631cbf914c8777e01875c293d0ed" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 02 21:01:47 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 02 21:01:47 2012 -0700" }, "message": "Merge \"msm_fb: display: Set HDMI PLL footswitch regulator to 1.8V after get()\" into msm-3.4" }, { "commit": "c9c4a47471dcdc0761d45240c0be3f2ad19b04a1", "tree": "9271e18df1ac35a50657efc3715e55da9e450d79", "parents": [ "2155bdbed3613afbfb6701f7765e59c42701f249", "079007e45e1e9674f51ace59fa4443e5fdb020ea" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 02 21:01:42 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 02 21:01:42 2012 -0700" }, "message": "Merge \"mm-video:vidc: Set max performance level for high framerate content\" into msm-3.4" }, { "commit": "824b752edbef5adebbf3db94cb2a1b792d25e2e6", "tree": "2e9b1dabe12f8d686cb09595a2657fb47d20d95d", "parents": [ "b9ff7f0d6a09bf70d357746b9c212b99ea40932d" ], "author": { "name": "Sujit Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Wed May 30 13:04:34 2012 +0530" }, "committer": { "name": "Sujit Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Tue Jul 03 08:29:03 2012 +0530" }, "message": "arm/dt: msm8974: add support for SD/eMMC bus speed modes\n\nSDC1 supports following bus speed modes:\n\t- HS200 at 1.8V\n\t- DDR at 1.8V\nSDC2 supports following bus speed modes:\n\t- SDR12, SDR25, SDR50, SDR104, DDR50\n\nChange-Id: I648435fc00f6b11634cb3d0c41106ecb0868143f\nSigned-off-by: Sujit Reddy Thumma \u003csthumma@codeaurora.org\u003e\n" }, { "commit": "b9ff7f0d6a09bf70d357746b9c212b99ea40932d", "tree": "822d1569319999fd83db73fd575207c68c24983f", "parents": [ "d1af26b2d9cbcb90249f348fa895d7669ef27c41" ], "author": { "name": "Sujit Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Fri May 04 09:57:49 2012 +0530" }, "committer": { "name": "Sujit Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Tue Jul 03 08:27:54 2012 +0530" }, "message": "arm/dt: msm8974: Add regulator support for SDC controllers\n\nSDC controllers need two types of power supply:\n- vdd (SD/eMMC flash core power supply)\n- vdd_io (SD/eMMC I/O pad power supply)\n\nAdd support for enable, disable, low power mode setting\nfor these regulators.\n\nChange-Id: Ifd0ef0d4dd9732893f49700fe86b1dad24497f71\nSigned-off-by: Sujit Reddy Thumma \u003csthumma@codeaurora.org\u003e\n" }, { "commit": "5e96aaa4c667b34b354a100cbe7b0c3da01cc3d4", "tree": "ddae141a59fc5c5672938996ac74bdccb9092464", "parents": [ "d1af26b2d9cbcb90249f348fa895d7669ef27c41" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Jun 26 11:21:03 2012 -0700" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Jul 02 19:36:59 2012 -0700" }, "message": "power: pm8921-charger: support dc charging while in usb host mode\n\nThe current code disables charging when the usb is operating in host\nmode. This unnecessarily stops charging from the DC path. The board\nlayout (the ovp fet and otg path) is assumed to support host mode and\ncharging from dc path.\n\nAlso make the usb driver change the power supply framework\u0027s scope\nproperty instead of calling 8921 charger apis directly.\n\nCRs-Fixed: 373365\nChange-Id: I2a9fb32de22cbe68e26078b97a7d83c40272a370\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "d1af26b2d9cbcb90249f348fa895d7669ef27c41", "tree": "b7458cbc77d602ad354be783f2932e8ed4824a4a", "parents": [ "b8c945ef648d5bdea012567e1beefa18dbdf6d2b", "22a06d18c6eb100419616ddf7a2c4ac403420a9e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 02 19:28:46 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 02 19:28:46 2012 -0700" }, "message": "Merge \"msm: kgsl: Add TLB flush for each submit in case of 8x25/7x2xa\" into msm-3.4" }, { "commit": "8ea0bd5997c5183c46224d076f050641459647f1", "tree": "574eb0e421749e46b6615966d4d778e133c9457d", "parents": [ "3ad5a6cb644e87f0aca054bcc4e77fce8a4d22db", "1ee4ac885c1cae01f8e2edb88ac08af43d1b555c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 02 19:28:41 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 02 19:28:41 2012 -0700" }, "message": "Merge \"qseecom: Add new ioctl call.\" into msm-3.4" }, { "commit": "079867153fcd3f05bd17847109271a621f1a7aaf", "tree": "bb4863a5ca571e5a3b02494e7cf0f18a85b67a21", "parents": [ "4d26d420771024009f596f2c5ed5d49a34036dd0" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Wed Jun 20 10:49:06 2012 -0600" }, "committer": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Mon Jul 02 18:47:26 2012 -0600" }, "message": "tty: smux_ctl: Remove unused ports\n\nOnly SMUX_DATA_CTL_0 is currently used from userspace.\n\nChange-Id: Iab9e4fa9b096d34a67fb6662418aec0be1381adb\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "4d26d420771024009f596f2c5ed5d49a34036dd0", "tree": "0d693fe4f3479f6c7b40802d9e9a48c9e3215620", "parents": [ "d6704e3e43a2707bb50826bb25898ce6d0d7ec47" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Wed Jun 20 10:43:29 2012 -0600" }, "committer": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Mon Jul 02 18:47:26 2012 -0600" }, "message": "tty: smux_ctl: Disable debug logging\n\nDisable debug logging that was only necessary for bring-up.\n\nChange-Id: I5a31a982efdd1bb1915571158cc164a3856b097d\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "d6704e3e43a2707bb50826bb25898ce6d0d7ec47", "tree": "d40b636d6237bf703da47a67e6e489835d068c76", "parents": [ "1646fd8b1405a41f2c706aa9cbc1c4a56c834e88" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Tue Jun 19 08:53:02 2012 -0600" }, "committer": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Mon Jul 02 18:47:26 2012 -0600" }, "message": "tty: smux_ctl: Support removing line discipline gracefully\n\nSMUX_CTL module currently does not handle removal of the driver\ngracefully. If there are any pending blocked calls on wait_event,\nand the line discipline is removed, this results in accessing\ndestroyed wake queues.\n\nAdd support for aborting wait in response to device removal.\n\nChange-Id: I3213306f6ed401f3abe5770ce324d9329e4dbc3f\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "9af5f4648c75bf4fcb2b7b626a7cc20603df6648", "tree": "d654625e5adcba78e64382f0a5f7ccf288ec5eda", "parents": [ "baa71f10a4a34fd0c9af7883b2a625b5069b6566", "d0fb08d69edbc8508e36ab35b890a7f370833b86" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 02 13:17:12 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 02 13:17:12 2012 -0700" }, "message": "Merge \"msm: usb_bam: Change the usb bam pipe threshold to 16 bytes\" into msm-3.4" }, { "commit": "d34ae3a44334d388a2fc9ac2da0048db5607c8a1", "tree": "bd4bc32d01cf6d5a901623d56a6cc97244268e16", "parents": [ "35042acbd1276886f6a52fa109b7be42eeb64bec", "f0fb300a7bd7ccbcd1102bc11d293e007bb65e78" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 02 13:17:08 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 02 13:17:08 2012 -0700" }, "message": "Merge \"usb: gadget: Match gadget and gadget_driver according to usb_core_id\" into msm-3.4" }, { "commit": "995fd27825c1bb27f0bfa76d4a887dc00cd0f1eb", "tree": "c5ff5336c461bfb6f8b1dccdc31f58f15af77b67", "parents": [ "35042acbd1276886f6a52fa109b7be42eeb64bec" ], "author": { "name": "Ashray Kulkarni", "email": "ashrayk@codeaurora.org", "time": "Mon Jul 02 12:57:55 2012 -0700" }, "committer": { "name": "Ashray Kulkarni", "email": "ashrayk@codeaurora.org", "time": "Mon Jul 02 12:57:55 2012 -0700" }, "message": "msm_vidc: Fix decoder output order.\n\nDecoder\u0027s output order was configured incorrectly, this\nchange fixes it.\n\nChange-Id: I523260db33f1df5ffb7c30026683b272c9a05488\nSigned-off-by: Ashray Kulkarni \u003cashrayk@codeaurora.org\u003e\n" }, { "commit": "1ee4ac885c1cae01f8e2edb88ac08af43d1b555c", "tree": "f5739575b0a8b93a2947fe19c74528b2c894950b", "parents": [ "35042acbd1276886f6a52fa109b7be42eeb64bec" ], "author": { "name": "Ramesh Masavarapu", "email": "rameshm@codeaurora.org", "time": "Fri Jun 22 15:38:34 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 02 10:11:05 2012 -0600" }, "message": "qseecom: Add new ioctl call.\n\nCurrently, qseecom user-space library does not have a way to\nverify if a particular secure application is loaded in the\nqsee or not. This new ioctl solves this issue.\n\nChange-Id: Ia96459f3b8aadee2f6a3af564bb1cc83695759b5\nSigned-off-by: Ramesh Masavarapu \u003crameshm@codeaurora.org\u003e\n" }, { "commit": "df766bbecaa4b783b1b39e65e13143dfa53dcb1c", "tree": "85c701b57a19e4b117fa132a10e7147df22ab2a6", "parents": [ "54bb81e600f02cd5c4b90dc332142982aa26e648", "d86101164974bd6cd4b2fe03f9ebabbf172cd268" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 02 04:49:45 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 02 04:49:45 2012 -0700" }, "message": "Merge \"qseecom: Support concurrency between QSEE apps.\" into msm-3.4" }, { "commit": "54bb81e600f02cd5c4b90dc332142982aa26e648", "tree": "7c6753f0434dfc8ea55f20b36adef7b6a616ebbb", "parents": [ "30980aaafd42c71628c76ebf8ababf2361fa5951", "ed2d87e6e9d8c83a6261767ceb60ccefb783bf10" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jul 02 04:49:41 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jul 02 04:49:41 2012 -0700" }, "message": "Merge \"power: pm8921-bms: remember soc between restarts\" into msm-3.4" }, { "commit": "112bd758e0992f1c7de4531e6530db5e49d6f21f", "tree": "3c23bf3ded43dab5748c8d8ac52ba2df6d7190f2", "parents": [ "c445c30e1ad245cfd9abe64bb80b863162469435" ], "author": { "name": "Sujit Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Wed Jun 20 12:29:45 2012 +0530" }, "committer": { "name": "Sujit Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Sun Jul 01 12:21:31 2012 +0530" }, "message": "mmc: msm_sdcc: Fix deadlock while resuming sdcc from userspace\n\nThe runtime power management of sdcc can be controlled by\nuserspace with auto/on modes by writing into\n/sys/devices/platform/msm_sdcc.1/power/control entry.\n\"auto\" mode allows runtime pm suspend to happen.\n\"on\" mode forbids runtime suspend of sdcc and also take care\nof resuming the device if already suspended. During this resume\nprocess there is a deadlock as described below:\n\no User writes \"on\" into control parameter.\n\no The sysfs write triggers a rpm_resume() (assume sdcc is\n already suspended, hence rpm_resume() tries to wake it up).\n\no rpm_resume() -\u003e msmsdcc_runtime_resume() -\u003e mmc_claim_host()\n -\u003e msmsdcc_enable() -\u003e pm_runtime_get_sync() -\u003e rpm_resume()\n -\u003e wait for previous rpm_resume() completion which cause deadlock.\n\nCRs-Fixed: 372071\nChange-Id: I0f666b56b6db98b182b8fc828588b476fd4eef6a\nSigned-off-by: Sujit Reddy Thumma \u003csthumma@codeaurora.org\u003e\n" }, { "commit": "c445c30e1ad245cfd9abe64bb80b863162469435", "tree": "7e5d9b6cdad7710cb2c1b45ba6f4989ae7d85fdd", "parents": [ "90ced6e40066e6ed681b78d1689ef9b8e552f0ab", "5dd5442cd6e726430ab5294149f1cff0a33ce6a2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 29 18:44:35 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jun 29 18:44:35 2012 -0700" }, "message": "Merge \"msm: camera: Add support for concurrent Ispif interface streaming\" into msm-3.4" }, { "commit": "d0fb08d69edbc8508e36ab35b890a7f370833b86", "tree": "78119d562a8abe49afcb64be27d9bbdeb1dc8d4c", "parents": [ "90ced6e40066e6ed681b78d1689ef9b8e552f0ab" ], "author": { "name": "Amit Blay", "email": "ablay@codeaurora.org", "time": "Fri Jun 29 17:11:04 2012 -0700" }, "committer": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Fri Jun 29 17:17:43 2012 -0700" }, "message": "msm: usb_bam: Change the usb bam pipe threshold to 16 bytes\n\nIn WHCK loopback test, data transfer stall is observed on DL\nwhere A2 could not send data to USB due to hardware buffer.\nCurrently the pipe event threshold of A2 BAM is 16 bytes. So\nA2 BAM will notify USB BAM almost as soon as it has any new\ndata. But the pipe event threshold of USB BAM was 512 bytes.\nChange the usb bam pipe threshold to 16 bytes, so USB BAM\ncan tell A2 BAM as soon as USB BAM consumes a descriptor with\neven small data trunk.\n\nChange-Id: I2703b8fab4260d5da5366d0a0d9b5a309d11a7a4\nCRs-Fixed: 374584\nAcked-by: Amit Blay \u003cablay@codeaurora.org\u003e\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "55bb033f625acb7776cabadc9de7699669a8cdd6", "tree": "5acf977f21b55bc1e88d2a6d0fb6e86f5793980b", "parents": [ "f1f63887812a871f4a37842008bab4bdb7560011" ], "author": { "name": "Marek Szyprowski", "email": "m.szyprowski@samsung.com", "time": "Thu Dec 29 13:09:51 2011 +0100" }, "committer": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Fri Jun 29 16:06:50 2012 -0700" }, "message": "drivers: add Contiguous Memory Allocator\n\nThe Contiguous Memory Allocator is a set of helper functions for DMA\nmapping framework that improves allocations of contiguous memory chunks.\n\nCMA grabs memory on system boot, marks it with MIGRATE_CMA migrate type\nand gives back to the system. Kernel is allowed to allocate only movable\npages within CMA\u0027s managed memory so that it can be used for example for\npage cache when DMA mapping do not use it. On\ndma_alloc_from_contiguous() request such pages are migrated out of CMA\narea to free required contiguous block and fulfill the request. This\nallows to allocate large contiguous chunks of memory at any time\nassuming that there is enough free memory available in the system.\n\nThis code is heavily based on earlier works by Michal Nazarewicz.\n\nChange-Id: I8a04c58b0d39ee7343ac0b58b6dad9d57912c91d\n[lauraa: fixed Kconfig conflict]\nSigned-off-by: Marek Szyprowski \u003cm.szyprowski@samsung.com\u003e\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nSigned-off-by: Michal Nazarewicz \u003cmina86@mina86.com\u003e\nAcked-by: Arnd Bergmann \u003carnd@arndb.de\u003e\nTested-by: Rob Clark \u003crob.clark@linaro.org\u003e\nTested-by: Ohad Ben-Cohen \u003cohad@wizery.com\u003e\nTested-by: Benjamin Gaignard \u003cbenjamin.gaignard@linaro.org\u003e\nTested-by: Robert Nelson \u003crobertcnelson@gmail.com\u003e\nTested-by: Barry Song \u003cBaohua.Song@csr.com\u003e\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "5dd5442cd6e726430ab5294149f1cff0a33ce6a2", "tree": "1b1b44ff9b433f942ece01d256a20b11ff40a815", "parents": [ "1d22dfa0b050d09fc589af90b8d35f32a5dc3056" ], "author": { "name": "Nishant Pandit", "email": "npandit@codeaurora.org", "time": "Tue Jun 26 22:52:44 2012 +0530" }, "committer": { "name": "Nishant Pandit", "email": "npandit@codeaurora.org", "time": "Sat Jun 30 03:27:54 2012 +0530" }, "message": "msm: camera: Add support for concurrent Ispif interface streaming\n\nAdd support for multiple ispif interfaces streaming concurrently.\nPIX abd RDI interface can stream at same time or two RDI interfaces\nmay stream at one time depending on usecase\n\nChange-Id: Ib3cef418cd2816bc19891c1855e1dcae5a2a55a1\nSigned-off-by: Nishant Pandit \u003cnpandit@codeaurora.org\u003e\n" }, { "commit": "07876121525c631cbf914c8777e01875c293d0ed", "tree": "61c0b6523335b7e311160a4c4edf3a4f044c1270", "parents": [ "1d22dfa0b050d09fc589af90b8d35f32a5dc3056" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Fri Jun 29 12:27:49 2012 -0700" }, "committer": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Fri Jun 29 14:49:40 2012 -0700" }, "message": "msm_fb: display: Set HDMI PLL footswitch regulator to 1.8V after get()\n\nAfter regulator_get call for HDMI PLL footswitch purpose, set\noutput voltage to 1.8 V to ensure proper state while enabling and\ndisabling regulator.\n\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\nChange-Id: Ifdd0cdbf614524b53038074b943cca65b71bbd24\n" }, { "commit": "90ced6e40066e6ed681b78d1689ef9b8e552f0ab", "tree": "05df89580057b67d3ffa6b340c12fb6a004cfde9", "parents": [ "1d22dfa0b050d09fc589af90b8d35f32a5dc3056" ], "author": { "name": "Abhimanyu Kapur", "email": "abhimany@codeaurora.org", "time": "Tue Jun 26 17:41:25 2012 -0700" }, "committer": { "name": "David Ng", "email": "dave@codeaurora.org", "time": "Fri Jun 29 12:43:08 2012 -0700" }, "message": "msm: 8974: rename copper to 8974\n\nThe official name for copper is MSM8974.\nSwitch to it.\n\nChange-Id: Ifb241232111139912477bf7b5f2e9cf5d38d0f9e\nSigned-off-by: Abhimanyu Kapur \u003cabhimany@codeaurora.org\u003e\n" }, { "commit": "8724934818b1d9f6f13f3e07a3b3ffd66fb7532e", "tree": "650784cbb330e8cae012af79f11b62d80f603970", "parents": [ "f707d8d022002cf28a0066b4548c932ebf1e74b5", "1bc7b22825ee72017f7519215f0aa5144d75a9c7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 29 12:16:48 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jun 29 12:16:48 2012 -0700" }, "message": "Merge \"msm: camera: Allow user to abort live snapshot.\" into msm-3.4" }, { "commit": "8a49608cf010892935740e26fe575dde56e5224e", "tree": "d2eb49da445af3fcc9296e082574c32e9cefd92f", "parents": [ "177040e45fab58c5cff272dfa44503ca4ac4b9e3", "5fd16f4c3d7c0a8a0a2147405e91bbfb9be6720e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 29 12:15:52 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jun 29 12:15:52 2012 -0700" }, "message": "Merge \"Revert \"msm: vidc: Avoid reconfig if EoS is received after SPS/PPS\"\" into msm-3.4" }, { "commit": "00d185c94d8cb5b0d06ffd367229b674996eb883", "tree": "72d09c4197ff800f1fa543af99f19146b3e78665", "parents": [ "cd2cbf075f30819bb542464128296e4deebf3b9b", "254d6740cfa0a32afe9bb66762199ea5931f53d0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 29 12:15:13 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jun 29 12:15:13 2012 -0700" }, "message": "Merge \"msm_fb: display: Flush pipe registers before staging for Mixer 0 or 1\" into msm-3.4" }, { "commit": "fc5614bfebf1c302870f3983db32b22e3cb24ab3", "tree": "c4e0a4652743ff86636026357440cc27a97ffc6d", "parents": [ "89d59be55f7d9b3a027abc307773ba3575af035b", "ed4b2afe41aa4dec5bf06823da35e33645d558a1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 29 12:14:48 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jun 29 12:14:48 2012 -0700" }, "message": "Merge \"vidc:720p: Fix first buffer with EOS flag in video decoder\" into msm-3.4" }, { "commit": "89d59be55f7d9b3a027abc307773ba3575af035b", "tree": "c123a5770748be5f17e1974639694bbe7b7030cf", "parents": [ "6a6f3c047358d4ee7244a76114d09e3faffb0593", "3c4142d9c308cd7e8176259ea58db222a48ca1e1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 29 12:14:44 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jun 29 12:14:44 2012 -0700" }, "message": "Merge \"mmc: msm_sdcc: reset sd card at boot time\" into msm-3.4" }, { "commit": "c539dab74e34bd1520007bfee96ab4fadb272caf", "tree": "f85dbeb0d403e6b077618e432f6be350e5281e70", "parents": [ "68103b8a5f0572637ceb5a026c6b469c9c5fa194", "2aa4c04acd71981890316d00402dc353c8a2bb7e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 29 12:14:18 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jun 29 12:14:18 2012 -0700" }, "message": "Merge \"ASoC: Handle slimbus port disconnection before opening another\" into msm-3.4" }, { "commit": "305c529189ab0adfbefec1ff03f246a8b7471244", "tree": "58b2527daa07416d66d515afdf65307021ab0cce", "parents": [ "a4a52a46b49d22f08c3b996d513bac3e7e2e861e" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Jun 21 16:15:43 2012 -0700" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Jun 29 09:57:11 2012 -0700" }, "message": "power: pm8xxx-ccadc: remove support for pm8921 v1.0 and v1.1\n\nThis ccadc module is reused in multiple pmics. It is now unnecessary\nto check for 8921 versions in the driver. As a result of this change\nolder 8921 versions are not supported.\n\nCRs-Fixed: 372679\nChange-Id: I2114f9428e2ba1a29c2bc9caaaa75106caf1dfc3\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "22a06d18c6eb100419616ddf7a2c4ac403420a9e", "tree": "42dbe818ef5a0d37e9a1ecf6da9e75df50bd6e20", "parents": [ "a4a52a46b49d22f08c3b996d513bac3e7e2e861e" ], "author": { "name": "Rajesh Kemisetti", "email": "rajeshk@codeaurora.org", "time": "Fri Jun 29 20:21:31 2012 +0530" }, "committer": { "name": "Rajesh Kemisetti", "email": "rajeshk@codeaurora.org", "time": "Fri Jun 29 21:50:59 2012 +0530" }, "message": "msm: kgsl: Add TLB flush for each submit in case of 8x25/7x2xa\n\nAdd TLB flush for each submit to prevent target freeze\nin case of 8x25/7x27a/7x25a targets.\n\nChange-Id: I350e72e4f71fef86c7cf9da0954ef65d5765b88f\nSigned-off-by: Rajesh Kemisetti \u003crajeshk@codeaurora.org\u003e\n" }, { "commit": "0679a81cb293699acf1f7cb30801ce11900b4420", "tree": "4e192ed371ccb26c1627ab3828e2905e4419409e", "parents": [ "a4a52a46b49d22f08c3b996d513bac3e7e2e861e" ], "author": { "name": "Pavankumar Kondeti", "email": "pkondeti@codeaurora.org", "time": "Fri Jun 29 10:51:58 2012 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 29 08:05:38 2012 -0600" }, "message": "USB: gadget: Fix scheduling while atomic bug in ci13xxx_udc\n\nThe current code is calling cancel_delayed_work_sync() from interrupt\nhandler which is causing scheduling while atomic bug.\n\nIf host sends reset or cable is disconnected, before the remote wakeup\nwork is scheduled, we may end up sending wakeup signaling. But this\nwork can not be canceled from interrupt handler as it involves sleeping.\nCheck wakeup conditions before initiating the remote wakeup in work\nfunction.\n\nChange-Id: I150ecadfd6669ec5a01b65298d330183596ba2c7\nSigned-off-by: Pavankumar Kondeti \u003cpkondeti@codeaurora.org\u003e\n" }, { "commit": "5fd16f4c3d7c0a8a0a2147405e91bbfb9be6720e", "tree": "73ffcbe4cf09a185d381ed313dd5efe1282394c6", "parents": [ "12eac47a850b6e3c05c7784c20f0d7e2a0933a62" ], "author": { "name": "Maheshwar Ajja", "email": "majja@codeaurora.org", "time": "Sun Jun 10 20:52:22 2012 +0530" }, "committer": { "name": "Maheshwar Ajja", "email": "majja@codeaurora.org", "time": "Fri Jun 29 19:33:25 2012 +0530" }, "message": "Revert \"msm: vidc: Avoid reconfig if EoS is received after SPS/PPS\"\n\nThis reverts commit fcd8763cbf25679c999e363ac63e65a234e4192d.\nThe above commit will break the trick mode playback functionality.\n\nCRs-fixed: 370048\nChange-Id: I6b3d116e8339520ef347eb387973db6f78b560b5\nSigned-off-by: Maheshwar Ajja \u003cmajja@codeaurora.org\u003e\n" }, { "commit": "8f6473c4ed38a41bc51cb8390c9dcd9fd38fc02e", "tree": "75060e017858c4a48b52e5193ac4f76cb6c7d0ae", "parents": [ "2b3d98df73fe2fcbc026be1c4a1c3e378c33420a", "812a8853ad9fba2b174e0d56588bd60b05b3def8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 29 04:06:13 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jun 29 04:06:13 2012 -0700" }, "message": "Merge \"regulator: Replace error prints in regulator_check_drms() with debug prints\" into msm-3.4" }, { "commit": "680f7aa4e55ed8b4bfdc5dbb07a225130149e9c2", "tree": "93f48c44204327c9c0200cd44c76fc5611466c79", "parents": [ "a3014e6b78f5fb1d124ece7c3be54b880c71761e", "28f14eecbd924d067520943613dcd0f965e0310e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 29 04:06:08 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jun 29 04:06:08 2012 -0700" }, "message": "Merge \"USB: gadget: Fix crash in ci13xxx_udc.c\" into msm-3.4" }, { "commit": "3c4142d9c308cd7e8176259ea58db222a48ca1e1", "tree": "7b02c367972c3d33d1d47d2fbd35d380b88e9cea", "parents": [ "a3014e6b78f5fb1d124ece7c3be54b880c71761e" ], "author": { "name": "Krishna Konda", "email": "kkonda@codeaurora.org", "time": "Wed Jun 27 11:01:56 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 29 03:42:42 2012 -0600" }, "message": "mmc: msm_sdcc: reset sd card at boot time\n\nAs per sd spec, if a sd card initialized in UHS mode needs to be\nreinitialized, then the card should be powered off and then powered\non before proceeding with initialization again. Otherwise the sd\ncard reports it does not support UHS mode and can\u0027t be initialized as\nan UHS card.\n\nCurrently sd card could be left powered on either because its regulator\nis marked as always on or because the sd card was not run-time suspended\nat the time of reboot. As a result on reboot, the sd card is not detected\nas an UHS card. In order to prevent this the sd card is powered off and\nthen powered on at boot time.\n\nCRs-fixed: 369644\nChange-Id: Ic44fa005a1ac2d59d174b320e5e80dd5323876c3\nSigned-off-by: Krishna Konda \u003ckkonda@codeaurora.org\u003e\n" }, { "commit": "ef38094d89e5e0ccffff3edbea65d86661e7acb6", "tree": "3d720202609e501354caba49a4f54154154729fb", "parents": [ "4b27cbe34ef974a4bcd415d2bf9399724e0ef0e9", "6fb38343372bd12a12711f27da989b0691281925" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 23:13:48 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 23:13:48 2012 -0700" }, "message": "Merge changes I506d5872,I5f9b1279,I6f98f319 into msm-3.4\n\n* changes:\n coresight: rename variables and functions from cs to coresight\n coresight: rename directory and files from cs to coresight\n cs: rename driver state data to drvdata and dynamically allocate it\n" }, { "commit": "4b27cbe34ef974a4bcd415d2bf9399724e0ef0e9", "tree": "dc89578f14a3da4ef2108ade8470bc2998f14f1a", "parents": [ "9690378be5be50bdf767b9c976cba0b44df1e855", "a9c0e0673867c346cebe7904874f6cb5cc5af67c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 23:13:38 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 23:13:38 2012 -0700" }, "message": "Merge changes I3c3c58de,If73198f2 into msm-3.4\n\n* changes:\n cs: use device attributes instead of kobj attributes\n cs: let each driver manage the clk for its device\n" }, { "commit": "9690378be5be50bdf767b9c976cba0b44df1e855", "tree": "f1988badeac2a6feed98b97d5d0ea51544929687", "parents": [ "b75f6e53773221505c5a90564315b597201ec6d3", "b84ef9df296454f010c0d0ee37351338944d9848" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 23:13:28 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 23:13:28 2012 -0700" }, "message": "Merge changes Ieddc3dd3,I6f83d281 into msm-3.4\n\n* changes:\n cs: add coresight core layer code\n cs: rename and move stm header file\n" }, { "commit": "b75f6e53773221505c5a90564315b597201ec6d3", "tree": "20cda486de90d220ab4d07e0a3ab0c0ae6b759a6", "parents": [ "ab0cd209206e566e14d55c3ba8530d3032bc618c", "5827c83b6bddfe15aa795f7906f29637e31aaf9a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 23:13:18 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 23:13:18 2012 -0700" }, "message": "Merge changes I722de994,I546ba939 into msm-3.4\n\n* changes:\n msm: jtag: move jtag related definitions to new jtag header\n cs: move shared data to external header\n" }, { "commit": "e0768bbb446aeccdf6034000c342d6e0614f0249", "tree": "b78f4a2fb45e1f346d784f2fe4257359ac78903d", "parents": [ "d0ea322ca8ea2b8532b3424b786b5566f7344b5e", "33454d2a05cd130f648e6f454e5878ff7f9713c4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 23:13:01 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 23:13:01 2012 -0700" }, "message": "Merge \"cs: rename qdss files to coresight\" into msm-3.4" }, { "commit": "a168dfc19b411bcaa9dcce83d24dbdd912d91d22", "tree": "261ba1b5247c40fa6bfb77b4a7d823a9f18ef325", "parents": [ "8e975c98b653c1ece752ff2b189c7051ef81118a", "2963de4b7704a0b9b8c9c199534ca0ab9ab273e8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 23:12:55 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 23:12:55 2012 -0700" }, "message": "Merge \"cs: move qdss code under drivers\" into msm-3.4" }, { "commit": "2aa4c04acd71981890316d00402dc353c8a2bb7e", "tree": "9ad25491e5f429dc0339a0ed93f85f7d0524c3a0", "parents": [ "39c6c645e779aedc0268dd07013672c0884d3562" ], "author": { "name": "Swaminathan Sathappan", "email": "Swami@codeaurora.org", "time": "Tue Jun 26 13:08:45 2012 -0700" }, "committer": { "name": "Swaminathan Sathappan", "email": "Swami@codeaurora.org", "time": "Thu Jun 28 18:06:20 2012 -0700" }, "message": "ASoC: Handle slimbus port disconnection before opening another\n\nProblem Description:\nOpen and close the same set of slimbus ports after\ncertain iterations will fail port open, as that port\nwas not disconnected successfully.\n\nFix Description:\nHandle sequence of closing slimbus ports. Store\nthe channel masks associated with each codec dai\nand reset them after they are closed from slimbus\nThen, release the close slimbus port event, after\nall the channels are closed completely\n\nChange-Id: Ie14b9f0920b37f905151b48f18df181503acc21d\nCRs-fixed: 370761\nSigned-off-by: Swaminathan Sathappan \u003cSwami@codeaurora.org\u003e\n" }, { "commit": "079007e45e1e9674f51ace59fa4443e5fdb020ea", "tree": "eff24d5b9782296879011fe7405faa5dde5ee0f5", "parents": [ "de27731b5b7e7a07a8b139a0449087160ff7e60c" ], "author": { "name": "Praveen Chavan", "email": "pchava@codeaurora.org", "time": "Wed Jun 20 12:38:25 2012 -0700" }, "committer": { "name": "Praveen Chavan", "email": "pchava@codeaurora.org", "time": "Thu Jun 28 18:04:13 2012 -0700" }, "message": "mm-video:vidc: Set max performance level for high framerate content\n\nPerformance issue is observed with 60fps content as the vcodec clock\nset based on number of macroblocks and framerate is not sufficient.\nThis fix checks for the framerate and sets max performance level if\nfps is more than 60 (59 to be more precise)\n\nChange-Id: I5d41643a32ec895565406fadec04dc95e04655a4\nSigned-off-by: Praveen Chavan \u003cpchava@codeaurora.org\u003e\n" }, { "commit": "2d5a022e735ea2919c2bbfaca8dfd197f7744db8", "tree": "c57a716b974e5d2acea7679afad4683350f4f91b", "parents": [ "05dde3a8507a5433005fd54a967720c2abaa6aa0", "5a10c6f7bc0c0de897ffcf9beb4d90578dd3e129" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 16:15:27 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 16:15:27 2012 -0700" }, "message": "Merge \"usb: misc: Send zero-length packets on bulk OUT\" into msm-3.4" }, { "commit": "05dde3a8507a5433005fd54a967720c2abaa6aa0", "tree": "ed23281041c01e68effea4c991aa1c1d5e4f37ff", "parents": [ "9fa30aa74d7e49b66816000e64fd12c9467369cb", "13079890492c1cbe866a55a1c10b26f9826c2161" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 16:15:21 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 16:15:21 2012 -0700" }, "message": "Merge \"net: usb: Continue submitting rx URBs upon QMI channel close\" into msm-3.4" }, { "commit": "a461423de140a96f3727316e43f96c07048f771b", "tree": "d21c88373b7a9a7f9acd8d56ddc5f651588a7703", "parents": [ "fabb205abc70b690a98553004b3b9d550be67b94", "b339a1606917e9fcf75b60a0d16f6cce73face1e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 16:15:04 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 16:15:04 2012 -0700" }, "message": "Merge \"msm: camera: Change OV2720 exposure setting\" into msm-3.4" }, { "commit": "28f14eecbd924d067520943613dcd0f965e0310e", "tree": "cc5b4b1d21843259845366968a742e888eb5d00c", "parents": [ "2d574694a6fd3f7cb2014105f00524f9da71459c" ], "author": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Thu Jun 07 16:12:49 2012 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 15:43:18 2012 -0600" }, "message": "USB: gadget: Fix crash in ci13xxx_udc.c\n\nIn isr_setup_status_phase(), driver is not checking whether\nthe pointer is NULL before checking udc-\u003estatus. Otherwise\nit leads to crash. Fix it by checking for NULL.\n\nCRs-Fixed: 367725\nChange-Id: I1a74e176671dac734899cc91b3ef6db8300e08e1\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\n" }, { "commit": "3ac0c174b21293d50773bb8b2bc5ad9ee2aedf23", "tree": "81085ac6389903e3d45f95c16a8f202b3607d0aa", "parents": [ "578a621707dac9772a1d7a4097d6bea229fe25dd" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Fri Jun 22 18:46:33 2012 -0700" }, "committer": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Thu Jun 28 14:27:10 2012 -0700" }, "message": "msm_fb: display: Fix Toshiba WSVGA panel porch and timing settings\n\nFix the porch and timing settings for DSI Toshiba WSVGA panel\nto enable writeback mode switch efficiently.\n\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\nChange-Id: Ib768d13617470f75ae027970c6ca4779d6b5a367\n" }, { "commit": "7d015cbdcb33837e8b7db7d4aed35d1dc5ec670a", "tree": "6c6c19e455fa29536b7bf1ab6abffda4308e29f6", "parents": [ "1a27b48fbc39c846a3b46b9d22d048cafb846da6", "ff5c9a6edd03766a5f57a51b36b2071053805e65" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 13:19:34 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 13:19:34 2012 -0700" }, "message": "Merge \"msm: camera: Actuator i2c interface changes\" into msm-3.4" }, { "commit": "1a27b48fbc39c846a3b46b9d22d048cafb846da6", "tree": "b5b90fe53df74feb95680f256162a455d918945a", "parents": [ "11d6c00de07032177cbe1756646c5b090239325b", "951b283d14378381633229113e3641d648f6ff22" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 13:19:25 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 13:19:25 2012 -0700" }, "message": "Merge \"tsif: workaround for stuck dma\" into msm-3.4" }, { "commit": "14e16e5a3e7f218d493489d527f2d231dfd34297", "tree": "219814856ba061425f30eb7c67cbff51b0d22230", "parents": [ "f913a5f9ec86ff58ae39aeadaada2729abfec6cf", "2029ca3e9eb0e821bac0bcc4cea60c85d0d3dac1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 13:19:00 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 13:19:00 2012 -0700" }, "message": "Merge \"msm: kgsl: Remove dangling reference to PMEM_MEMTYPE\" into msm-3.4" }, { "commit": "ed2d87e6e9d8c83a6261767ceb60ccefb783bf10", "tree": "093ffaf265c48aef1472a3c180b1e117c5d5d404", "parents": [ "c432fdf28656051f358ff4b7cc41f43d4eeb3ed8" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Jun 26 20:15:36 2012 -0700" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Jun 28 11:55:06 2012 -0700" }, "message": "power: pm8921-bms: remember soc between restarts\n\nCurrently the code does not have a mechanism to remember the soc\nreported just before shutting down and upon restarting the new\nsoc reported is off from the previous soc value reported.\n\nThis change introduces\n- a method to save soc in an unused coincell back register: ssbi address\n 0x107 is not used on 8921 and serves the purpose of storing the soc.\n The driver reads this value and uses it to scale the reported soc.\n- a method to detect that a battery was removed and perhaps replaced by a\n different one. If the battery is found replaced the driver is notified\n of the change and it disregards the soc value it read from the backup\n register. The charger driver has a battery backed bit (force vref\n therm) which it sets in its initialization sequence. Once set the\n value remains between restarts, unless the battery is removed. The\n default value of this bit is 0. Hence if a zero is detected before\n writing to it, battery was removed between restarts - this mechanism\n is used to notify the BMS to disregard the soc read from the backup\n register.\n\nNote that for this to work correctly the bootloader needs to be updated to\nnot overwrite register 0x107 upon restart.\n\nCRs-Fixed: 370287\nChange-Id: If7d098552d36eb27a396ee7d37f78d3629861f6e\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "6fb38343372bd12a12711f27da989b0691281925", "tree": "95322fb87186ba3fc26a56f55254b11cd470802f", "parents": [ "1746b8fbfc2e636cffd7233f27d5354ed33e8adf" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Sun Jun 03 14:51:38 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu Jun 28 11:48:27 2012 -0700" }, "message": "coresight: rename variables and functions from cs to coresight\n\nComplete the rename by changing cs to coresight for variables,\nfunctions and constants.\n\nChange-Id: I506d5872e5c09f201c4f3674d7722d36eca26921\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "a9c0e0673867c346cebe7904874f6cb5cc5af67c", "tree": "eab3648d96d902c7a2080a985bc1b7af25f77040", "parents": [ "f17b147caf2b5cf3a5033b1cdd29506b06797050" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Mon May 28 13:45:35 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu Jun 28 11:48:26 2012 -0700" }, "message": "cs: use device attributes instead of kobj attributes\n\nIn preparation for subsequent changes, switch to using device\nattributes instead of kobj attributes. This fits well with the\nimplementation and makes it easy to support multiple instances\nof the same device.\n\nChange-Id: I3c3c58de9dba599bc44a57c2ddeb75100a4edf46\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "b84ef9df296454f010c0d0ee37351338944d9848", "tree": "4fb2853d0434445f44b947070b4f5e154e43766a", "parents": [ "05490936e6dbcf7a6002880a9528a37b3aa1e800" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu May 24 14:01:43 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu Jun 28 11:48:26 2012 -0700" }, "message": "cs: add coresight core layer code\n\nSupport for CoreSight core layer apis that will be used by other\nCoreSight drivers.\n\nChange-Id: Ieddc3dd362ee8e641abc557153d0a3e38aa9beab\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "1746b8fbfc2e636cffd7233f27d5354ed33e8adf", "tree": "bb0d2295861a0d7a84b73a53897b163967e867d4", "parents": [ "16aefdb7717d51445046d7cfbe48336026265188" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Sat Jun 02 21:11:41 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu Jun 28 11:48:26 2012 -0700" }, "message": "coresight: rename directory and files from cs to coresight\n\nSince cs is not a well known acronym for CoreSight, rename\ndirectory and files from cs to coresight.\n\nChange-Id: I5f9b12794b80b1c01c9ce0621d53ee6be408a361\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "f17b147caf2b5cf3a5033b1cdd29506b06797050", "tree": "cdab43fe4c6152ce338402f12c80dcd09091bc19", "parents": [ "b84ef9df296454f010c0d0ee37351338944d9848" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Fri May 25 22:23:52 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu Jun 28 11:48:26 2012 -0700" }, "message": "cs: let each driver manage the clk for its device\n\nEach device driver manages its own clk by using the clk apis that\nnow support CoreSight clock. Remove qdss clock wrapper functions\nand their usage.\n\nChange-Id: If73198f273f69e5525a6444e7a7c277c20c96111\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "16aefdb7717d51445046d7cfbe48336026265188", "tree": "43345dbe2eb357289621a6ff733127314c2e61bd", "parents": [ "a9c0e0673867c346cebe7904874f6cb5cc5af67c" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Wed May 30 10:41:23 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu Jun 28 11:48:26 2012 -0700" }, "message": "cs: rename driver state data to drvdata and dynamically allocate it\n\nIn preparation for using the CoreSight core layer code, rename driver\nstate data to drvdata. Dynamically allocate drvdata to support more\nthan one device instance and hence more than one drvdata instance.\n\nChange-Id: I6f98f3194ff012c34ff6851e60e4429febfb15bd\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "33454d2a05cd130f648e6f454e5878ff7f9713c4", "tree": "52a199967e7edd3736913a5809274a2845df8aa1", "parents": [ "2963de4b7704a0b9b8c9c199534ca0ab9ab273e8" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Fri May 18 10:48:17 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu Jun 28 11:48:25 2012 -0700" }, "message": "cs: rename qdss files to coresight\n\nAs part of creating generic coresight driver code, rename qdss\nto coresight.\n\nChange-Id: I18f32ca96bb5c2e7ca540f592871e9942f2188e4\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "05490936e6dbcf7a6002880a9528a37b3aa1e800", "tree": "ead6c6c4192567352f035566644956955c051113", "parents": [ "5827c83b6bddfe15aa795f7906f29637e31aaf9a" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Sun May 20 18:20:19 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu Jun 28 11:48:25 2012 -0700" }, "message": "cs: rename and move stm header file\n\nTo support generic coresight driver, move stm header file from\nmach-msm to include/linux\n\nChange-Id: I6f83d28156fac72a2c35637b7f9b9b58d10d964d\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "43e47bd4a9c92bd8aa1dd6ead5ed6c13c880005a", "tree": "9dadb56a1c0f2f874d1eee061a4831442b5774fc", "parents": [ "33454d2a05cd130f648e6f454e5878ff7f9713c4" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Sat May 19 18:10:55 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu Jun 28 11:48:25 2012 -0700" }, "message": "cs: move shared data to external header\n\nMove common shared data to external coresight header file.\n\nChange-Id: I546ba939ef7d3d746cd171802498da5be872c234\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "2963de4b7704a0b9b8c9c199534ca0ab9ab273e8", "tree": "13a2dbe1fc3bc1987aee5cb244f4514ce8e146c6", "parents": [ "27086d9e854d8d6ac5b529c1deb43c94c6591bfe" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu May 17 12:43:40 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu Jun 28 11:48:24 2012 -0700" }, "message": "cs: move qdss code under drivers\n\nIn preparation to create generic coresight drivers code move\nexisting qdss code under drivers/cs and include/linux\n\nChange-Id: If7697a9961006fe94818e32d19aea75c56ce225d\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "1bc7b22825ee72017f7519215f0aa5144d75a9c7", "tree": "39a39eb772183f383d2c2029d853aeb9d0c2db21", "parents": [ "f913a5f9ec86ff58ae39aeadaada2729abfec6cf" ], "author": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Sat Jun 23 16:28:11 2012 -0700" }, "committer": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Thu Jun 28 11:37:36 2012 -0700" }, "message": "msm: camera: Allow user to abort live snapshot.\n\nDue to some reason, user can decide to abort a live\nsnapshot while it is in progress. Add support to stop\nthe VFE write masters right away so that the VFE\nstops writing on the buffers allocated by the user.\nAlso send an ACK message to userspace once we get\nconfirmation from VFE that it has stopped using\nthe buffers.\n\nCRs-Fixed: 373080\nChange-Id: Ia4d9134298dd3a1a51f5829f9bcc2b80d6f21d0f\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\n" }, { "commit": "f913a5f9ec86ff58ae39aeadaada2729abfec6cf", "tree": "4900cba89d3705b441b3d4f4d63667c18a2d9d86", "parents": [ "dba18a42c50ceb6d1344aa0c72c14002786c082d", "b5085c57a43b2ba6cded7b4adeb646ed3c8ad095" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 11:30:47 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 11:30:47 2012 -0700" }, "message": "Merge \"msm_fb: display: Increase wait for VSYNC\" into msm-3.4" }, { "commit": "334fde7fe00e8d9dcaca3591bba8bfe85b6c1364", "tree": "c4921c0bbe0d978c91400eb16a12cc6cb1dd39c3", "parents": [ "b851263cb4d0904adf7d2bb7d9ef01531c026ca0", "37320fb657169e39aef13afb468ae551481658f4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 11:30:37 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 11:30:37 2012 -0700" }, "message": "Merge \"mdss: display: Correct regulator API usage\" into msm-3.4" }, { "commit": "b851263cb4d0904adf7d2bb7d9ef01531c026ca0", "tree": "2e247835f02f56d76300cd8499b2eb302dd46598", "parents": [ "8b6aedcb6b752596033e91922fd461130e4160cd", "b9662ca49cfe619e076476dcf8297a4031f0c310" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 11:30:28 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 11:30:28 2012 -0700" }, "message": "Merge \"tspp: use device name when getting clock\" into msm-3.4" }, { "commit": "8b6aedcb6b752596033e91922fd461130e4160cd", "tree": "228de1199e0f3a82198b8f9e7e497c7b3e877433", "parents": [ "af1bcd567226babdaf875e61795f355d22d36238", "ddd20e2ff4e5d2d4f11d9ad54d40175d35f724e7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 11:30:25 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 11:30:25 2012 -0700" }, "message": "Merge \"vidc:vdec: Clean extradata portion and invalidate whole buffer\" into msm-3.4" }, { "commit": "7c33c6f18d8e8a1585ec91fcb4f8bc11aaae80ec", "tree": "e1b491f8f924ad467ecc44817e9aabbd4b5d1cd3", "parents": [ "07b542e579401c462732a59ff88ab2d351814aa9", "aadc14e2ef6a6a84681233ba8020b72b38b98819" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 11:30:15 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 11:30:15 2012 -0700" }, "message": "Merge \"msm_fb: display: change ion memory map for mdp mixer2 writeback\" into msm-3.4" }, { "commit": "c13c58a7e01b38991e268f739cf140a74a1ff78d", "tree": "70a3ec03cc74f86270ef7237990e610627bd955d", "parents": [ "b7c600e93ae971487b2805ab062c6e0bbf6850c8", "9efd5c923e5c8282ad7f80997732e4562cab1767" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 11:30:09 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 28 11:30:09 2012 -0700" }, "message": "Merge \"radio-tavarua: Add new IOCTL to set the soft mute\" into msm-3.4" }, { "commit": "254d6740cfa0a32afe9bb66762199ea5931f53d0", "tree": "ecdf0b667a63b72f0ea22713aa6c1cac357731c3", "parents": [ "578a621707dac9772a1d7a4097d6bea229fe25dd" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Wed May 30 22:12:09 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 11:18:09 2012 -0600" }, "message": "msm_fb: display: Flush pipe registers before staging for Mixer 0 or 1\n\nFor Mixer 2, register flush need not be called. Flushing is done\nonly for pipes on mixer 0 and 1.\n\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\nChange-Id: I54758f79552790de2ad936703ba6140ac57b76c4\n" }, { "commit": "a2e0c10e4b6bb438300618d6757e9172b4f14f81", "tree": "41b90daaefcdc2f16d0b56034f35974b03053544", "parents": [ "578a621707dac9772a1d7a4097d6bea229fe25dd" ], "author": { "name": "Peter Liu", "email": "pingchie@codeaurora.org", "time": "Fri Jun 08 17:06:53 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 28 04:02:48 2012 -0600" }, "message": "msm: camera: Add per instance lock in to serialize\n\nAdd per instance lock to serialize stream operation.\nProtect unpredicted crash on video recording by serializing ops.\nInstead of only using the vid_lock to protect the video node,\nwe need inst lock to serialize the stream operation, too.\nThis commit increases the stability during recording.\n\nChange-Id: I4f6dcb6637eb700df04f30a102aada4fdec9f2d1\nCRs-Fixed: 363221\nSigned-off-by: Peter Liu \u003cpingchie@codeaurora.org\u003e\n" }, { "commit": "d734c1c405d1009cbc623013c1e6bd2eca1301f5", "tree": "794e8a7984ca0f8192c5c25ef2568db96aa8ac50", "parents": [ "560163b65ddaf51a98a1bfbca96d64525b964a56", "4a4f2d591cebc94b179e58cc6418f4598146f3c8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jun 27 23:10:25 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jun 27 23:10:25 2012 -0700" }, "message": "Merge \"msm: display: Add MDP footswitch regulator control for HDMI PLL\" into msm-3.4" }, { "commit": "560163b65ddaf51a98a1bfbca96d64525b964a56", "tree": "3e5689979c4a1813c374086d921e3944f9231687", "parents": [ "ef51d0ca48efe70e39db8ccb89bfbcd07f94d65d", "e404049ae6562b4a5d9df2641b20ffd234004b83" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jun 27 23:10:23 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jun 27 23:10:23 2012 -0700" }, "message": "Merge \"EHCI: HSIC: Set RUN/STOP bit after PORT_RESUME gets cleared\" into msm-3.4" }, { "commit": "3cfe310bac87869e702371482d2461010a1895c1", "tree": "e0fce6ebf22e13f6b1a8beb405694b10ccaf58a6", "parents": [ "8c2e486c0b36759a26aa2db87568c010358cea5f", "73ec728288b1d30c3b967a378d0f2893d254bd67" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jun 27 23:10:20 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jun 27 23:10:20 2012 -0700" }, "message": "Merge \"msm: camera: CPP driver Framework\" into msm-3.4" }, { "commit": "9efd5c923e5c8282ad7f80997732e4562cab1767", "tree": "ceff6b889620c083e0e0e5a06921a0b4385211a9", "parents": [ "bebdc785eb1fe4bd03e10ef71b272a778e621acb" ], "author": { "name": "Venkateshwarlu Domakonda", "email": "Venkateshwarlu@codeaurora.org", "time": "Fri May 11 21:18:45 2012 +0530" }, "committer": { "name": "Venkateshwarlu Domakonda", "email": "Venkateshwarlu@codeaurora.org", "time": "Thu Jun 28 10:05:18 2012 +0530" }, "message": "radio-tavarua: Add new IOCTL to set the soft mute\n\nImplement IOCTL to enable or disable the soft mute settings.\n\nChange-Id: Ie7f684f93e866d1126a59315bbe550e0677d35ee\nCRs-Fixed: 356774\nSigned-off-by: Venkateshwarlu Domakonda \u003cVenkateshwarlu@codeaurora.org\u003e\n" }, { "commit": "37320fb657169e39aef13afb468ae551481658f4", "tree": "5580a8723910fb5b6b01af84e76205a3115a3bdf", "parents": [ "48c07ce7297c19219280abe4f99f8a9a6457aeb9" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Tue Jun 26 14:50:28 2012 -0700" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Jun 27 21:34:06 2012 -0700" }, "message": "mdss: display: Correct regulator API usage\n\nA device pointer should be passed to regulator_get() as the first\nargument, and the regulator mapped to the MDSS device in the device\ntree. Do this.\n\nThis also resolves the following message seen in debugfs, which\nis present when regulator_get() is called with a NULL device:\n\u003c4\u003e[ 1.145507] gdsc_mdss: Failed to create debugfs directory\n\nChange-Id: I70a5137a31dbf82ae1e6634249f274cb16fe7a71\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "6ed2d52bc58d2fc27eb892b39d8a6a9ea831279c", "tree": "0bd00d3176bc98a003eb4bb9da60a4f4c9bff8e7", "parents": [ "5ec52d66a4e3053c307e33ada60f4710c7475925", "90a06cc8438948f57d028c1dd97cfe95cee0d451" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jun 27 21:31:21 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jun 27 21:31:21 2012 -0700" }, "message": "Merge \"slimbus: Modify check for empty slots\" into msm-3.4" }, { "commit": "5ec52d66a4e3053c307e33ada60f4710c7475925", "tree": "51868101dd8dfe6fae79b1781e51458c6ebd9a58", "parents": [ "498f91518961b6d0c662b3fc68aeb3043ea61ca9", "e8f167407568cab5abaf8c1d075192d996b841d8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jun 27 21:31:19 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jun 27 21:31:19 2012 -0700" }, "message": "Merge \"spi_qsd: chip select doesn\u0027t assert for every 4k bytes\" into msm-3.4" }, { "commit": "13079890492c1cbe866a55a1c10b26f9826c2161", "tree": "6db14c28dd6ca155c5025ff836d6841e881110eb", "parents": [ "bebdc785eb1fe4bd03e10ef71b272a778e621acb" ], "author": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Wed Jun 13 18:36:03 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jun 27 20:45:37 2012 -0600" }, "message": "net: usb: Continue submitting rx URBs upon QMI channel close\n\nIf user space consumer of QMI channels restarts, channels get closed\nand opened again. Closing QMI channel stops submitting rx URBs which\nis not getting re-submitted during channel open. Since userspace\nconsumer automatically restarts in case if it gets killed, do not kill\nthe rx URBs upon channel close.\n\nCRs-Fixed: 370712\nChange-Id: Ia58aaefd5245b07640fe2ec5eb2ec5fe1ae43cd4\nSigned-off-by: Hemant Kumar \u003chemantk@codeaurora.org\u003e\n" }, { "commit": "b5085c57a43b2ba6cded7b4adeb646ed3c8ad095", "tree": "24c70d4d3f1d32ca7ce7a7f5044b579ba72a29c7", "parents": [ "bebdc785eb1fe4bd03e10ef71b272a778e621acb" ], "author": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Wed Jun 20 11:43:54 2012 +0530" }, "committer": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Thu Jun 28 07:53:26 2012 +0530" }, "message": "msm_fb: display: Increase wait for VSYNC\n\nWait time for VSYNC needs to be increased to accomodate 1080p\n24HZ resolution which requires around 41ms.\n\nCRs-Fixed: 368521\nChange-Id: Ideda24bb83e32a6d5035c6193ef3dfd5e0c947fc\nSigned-off-by: Ajay Singh Parmar \u003caparmar@codeaurora.org\u003e\n" }, { "commit": "bdb3b056a44989223bab0c970100741649d293e1", "tree": "3f236271372d7d8d18b7f2794c0bb7887601f7e7", "parents": [ "cf95353d62057a229599973898545f541121abbf", "41c2dcc87fa00e94955cf6ea9817a966bb50b762" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jun 27 17:55:42 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jun 27 17:55:42 2012 -0700" }, "message": "Merge \"msm: UIM driver msm_uim\" into msm-3.4" }, { "commit": "dcab3c9c5580a0f359c1bd06f709c52696e65d8b", "tree": "e1af4bdc1b314c47264c735099ba50f190e297fe", "parents": [ "e2748bf57b8704113763c3b92848569cab316fd9", "59d890ff84c431d1cf56118ba0c5892b7d9b7a06" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jun 27 17:55:32 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jun 27 17:55:32 2012 -0700" }, "message": "Merge \"power_supply: add change the scope property\" into msm-3.4" }, { "commit": "e2748bf57b8704113763c3b92848569cab316fd9", "tree": "b3542fdf53697664a6674d312df8e793cb46b505", "parents": [ "cd1f78ed7f21e5b36841d4b73736d19f1b6ef417", "e6a71cfc3937f12e49bfda9568f0988c459da173" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jun 27 17:55:28 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jun 27 17:55:28 2012 -0700" }, "message": "Merge \"usb: gadget: u_sdio: Fix compilation when DEBUG is defined\" into msm-3.4" } ], "next": "aeff0fbde6ce8ffd6ec1baf7f2c08b75be4bba95" }