)]}' { "log": [ { "commit": "930bf7bfd7b754bf2d464c7574a02016104f2cb4", "tree": "21e050f0dc5e8dfa0df64093ab9f638a1d22fe0a", "parents": [ "4317676a54fd89d971e3c1b16fc310fde3021812" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Jul 25 12:23:58 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:09 2011 -0700" }, "message": "mfd: pm8xxx-irq: workaround for lost interrupt issue\n\nAn issue of missing interrupt was observed while resuming the device.\nThe genirq framework calls __enable_irq on all the interrupts during\nresume. This inturn calls unmask in the pm8xxx which caused the\npending status to drop for that interrupt. Later when the summary\nhandler is called, it does not see that interrupt pending and so its\nhandler is never called.\n\nThe pm8xxx irq module has a hardware bug where writing to the config\nbits clears the pending status of the interrupt.\n\nFix it by avoiding unmasking the interrupt again if it is already\nunmasked. This will prevent us from writing to the interrupt config\nstate, thus preventing dropping of the pending bit if set.\n\nCRs-Fixed: 297320\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "4317676a54fd89d971e3c1b16fc310fde3021812", "tree": "23714c70ce3d26284667e877b54503bacb9aa23d", "parents": [ "6d7738a783f8f82f0fff430dd4d68aecbb18fe25" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Jul 26 15:33:38 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:08 2011 -0700" }, "message": "msm: board-msm8960: Add enable times for PM8921 regulators\n\nSpecify board specific enable times for each of the PMIC 8921\nregulators. Assume worst case values for each.\n\nCRs-Fixed: 296183\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "6d7738a783f8f82f0fff430dd4d68aecbb18fe25", "tree": "3071e590ad1bf49615cde8a4b848ee23225c8654", "parents": [ "7b57bb815b5287b0c8ef618459d989475aa2f071" ], "author": { "name": "Gagan Mac", "email": "gmac@codeaurora.org", "time": "Thu Jul 21 14:23:31 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:08 2011 -0700" }, "message": "msm: msm_bus: Fix compilation error on enabling debug flag\n\nAfter refactoring the driver, fabric debug messages need to be\ncorrected as fabrics are abstracted out of rpm file.\n\nSigned-off-by: Gagan Mac \u003cgmac@codeaurora.org\u003e\n" }, { "commit": "7b57bb815b5287b0c8ef618459d989475aa2f071", "tree": "c5a29710ae5ffc5e0d8ba6427fa567c2aa4e5a38", "parents": [ "3e327763c9d3cf1a4821ca3ec610eff8e4c8789a" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Tue Jul 19 19:14:23 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:07 2011 -0700" }, "message": "msm_fb: display: Use __va instead of ioremap for framebuffer memory map\n\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\n" }, { "commit": "3e327763c9d3cf1a4821ca3ec610eff8e4c8789a", "tree": "b54677da9a2c6c64b82dc1cec1eaba57fba02110", "parents": [ "885f510f6f07c88f13940b34d35553ede8f488f7" ], "author": { "name": "Yaniv Gardi", "email": "ygardi@codeaurora.org", "time": "Wed Jul 27 11:11:04 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:06 2011 -0700" }, "message": "msm: sdio: adding multi channel and multi device test for LPM\n\nThe testing mechanism and correctness checking had to be changed\nin order to support multi channels and multi devices LPM test.\nTo support that, all the LPM info must be configured and saved per device,\nwhile each device decides whether to go to sleep according to all its\nchannels.\n\nSigned-off-by: Yaniv Gardi \u003cygardi@codeaurora.org\u003e\n" }, { "commit": "885f510f6f07c88f13940b34d35553ede8f488f7", "tree": "790a62c956d94ea668abf11469c1adbc2c7dd802", "parents": [ "a3c0d9420976b7a6b69baa98d2e8ea3ed89c9a0e" ], "author": { "name": "Laxminath Kasam", "email": "lkasam@codeaurora.org", "time": "Thu Jul 14 10:20:21 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:06 2011 -0700" }, "message": "ASOC: msm8x60: support to device_mute is added.\n\nDevice mute control is added which can mute the\nrespective dev_id to volume zero.\nmsm_device_mute() in user space will use this\ncontrol.\n\nCRs-Fixed: 295399\nSigned-off-by: Laxminath Kasam \u003clkasam@codeaurora.org\u003e\n" }, { "commit": "a3c0d9420976b7a6b69baa98d2e8ea3ed89c9a0e", "tree": "3b902523119a792effecdbb3d4deabb1e2c9dc11", "parents": [ "1e36a02967aff9238b8e26b6ba23070b51e660bb" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Jul 25 17:53:45 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:05 2011 -0700" }, "message": "mfd: pmic8058: fix for lost adc interrupt\n\nAn issue of missing interrupt was observed while resuming the device.\nThe msm_charger resume called adc conversion to get the battery\nvoltage. The adc conversion function enables the interrupt and\nstarts the conversion. Then pmic8058_resume gets called now which\nre-enables the adc interrupt causing the pending bit to drop. With\nthe ADC EOC interrupt missed, the msm_charger does not receive a\ncompletion event, causing a watchdog timeout.\n\nThe pmic8058 irq module has a hardware bug where writing to the config\nbits clears the pending status of the interrupt.\n\nFix it using a sysdev where the pmic interrupts are switched before\nany of the subdevices resume and use nonwakeup interrupts. Since\nin sysdev resume we only enable non wakeup interrupts the status of\nwakeup interrupts remains intact.\n\nCRs-Fixed: 295261\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "1e36a02967aff9238b8e26b6ba23070b51e660bb", "tree": "3ac8ac152715b4f0ec3e21ddb0be01f9e4924e38", "parents": [ "f453bb396affe07bacf9c9f021c487eef59a47be" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Wed Jun 22 17:08:13 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:04 2011 -0700" }, "message": "pmem: ensure SMI correctness\n\nDue to hardware constraints, the SMI should not be mapped\nin the kernel space when not in use. Unmap the SMI from\nthe kernel address space when the last allocation is freed.\nVote for bus bandwidth as well while the SMI is allocated.\n\nCRs-Fixed: 281723\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "f453bb396affe07bacf9c9f021c487eef59a47be", "tree": "c62e3dcf7b96296e09a2b2a40007679527f321bb", "parents": [ "2d0280311f65092e61a875121b5a4b21a09a72cc" ], "author": { "name": "Peter Krystad", "email": "pkrystad@codeaurora.org", "time": "Tue Jul 19 17:23:34 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:04 2011 -0700" }, "message": "Bluetooth: Add support for L2CAP Extended Flow Spec option.\n\nAdd send and receive of Extended Flow Spec option during L2CAP\nlockstep configuration and passing the flow specs to HCI.\n\nSigned-off-by: Peter Krystad \u003cpkrystad@codeaurora.org\u003e\n\nConflicts:\n\n\tinclude/net/bluetooth/hci.h\n\tinclude/net/bluetooth/hci_core.h\n\tnet/bluetooth/l2cap_core.c\n" }, { "commit": "2d0280311f65092e61a875121b5a4b21a09a72cc", "tree": "b4b869a1f2b657da5cf0c5eecfcc57d392fcddff", "parents": [ "4ebccc63cf49005cf446f7fb99fe926d8163e565" ], "author": { "name": "Amy Maloche", "email": "amaloche@codeaurora.org", "time": "Wed Jul 20 14:08:06 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:03 2011 -0700" }, "message": "board: msm8960: add machine_is option for fluid i2c registry\n\nSigned-off-by: Amy Maloche \u003camaloche@codeaurora.org\u003e\n" }, { "commit": "4ebccc63cf49005cf446f7fb99fe926d8163e565", "tree": "64d2ff4f75f9f630081aa3541a3fea097124a4b5", "parents": [ "18b04783a057552e9632596dec2fa0329f26b589" ], "author": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Fri Jul 22 09:43:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:03 2011 -0700" }, "message": "msm: 8064: add support for gpio/tlmm.\n\nAdded Kconfig entry to enable the GPIOMUX driver.\nUpdated Makefile to compile gpiomux driver files.\nAdded io map for TLMM device, and perform gpiomux\ninitialization without installing any gpios.\nGpios will be mapped when the peripheral connections\nare finalized for virtio, cdp or other targets.\n\nSigned-off-by: Joel King \u003cjoelking@codeaurora.org\u003e\n" }, { "commit": "18b04783a057552e9632596dec2fa0329f26b589", "tree": "fbf8fe0e624f78b0374eff8de2a75ce6af739b19", "parents": [ "57996e3add058436fd4801644106c6fb3c00e489" ], "author": { "name": "Kobi Cohen Arazi", "email": "kobic@codeaurora.org", "time": "Tue Jul 26 12:11:34 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:02 2011 -0700" }, "message": "Add missing header guards in msm_rotator.h\n\nmsm_rotator.h was missing define __MSM_ROTATOR_H__\n\nSigned-off-by: Kobi Cohen-Arazi \u003ckobic@codeaurora.org\u003e\n" }, { "commit": "57996e3add058436fd4801644106c6fb3c00e489", "tree": "c8bcd71cb3f8db3557354c1dd7deacfba6fcca3f", "parents": [ "60f8007df48104b7b067de307704abb830ef901a" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Thu May 26 19:12:22 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:01 2011 -0700" }, "message": "msm: kgsl: Only bind kgsl to CPU0, not CPU1\n\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "60f8007df48104b7b067de307704abb830ef901a", "tree": "e9fea373b618f08716c4115b1da018c192f44a99", "parents": [ "5a7df4e511eec88b78ff813ec1165b16d3baa8a9" ], "author": { "name": "Gopikrishnaiah Anandan", "email": "gopikr@codeaurora.org", "time": "Wed Jul 20 12:10:07 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:01 2011 -0700" }, "message": "vidc: vdec: Pass alignment flag to mapping api\u0027s.\n\nMapping api by default assumes 4K alignment.\nVideo core requires output buffer to be aligned\nto 8K.This change will pass aligment information to\nthe mapper API.\n\nSigned-off-by: Gopikrishnaiah Anandan \u003cgopikr@codeaurora.org\u003e\n\nConflicts:\n\n\tdrivers/video/msm/vidc/common/init/vidc_init.c\n" }, { "commit": "5a7df4e511eec88b78ff813ec1165b16d3baa8a9", "tree": "6cf71e7c92561c3cca24f962a0ec5dab22da275f", "parents": [ "78d812ffc88511215f3488870631428858f139c5" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Jul 27 13:16:24 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:00 2011 -0700" }, "message": "power: pm8921-charger: warn when battery is low\n\nIf the battery is very low print a warning in the kernel logs. This will\nhelp debugging restart issues because of a low battery.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "78d812ffc88511215f3488870631428858f139c5", "tree": "974ee2170937291b0c7ab6fce64a563d0fcd9aeb", "parents": [ "9825dc6c795e9c771b5092e488d3d475a108f192" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Jul 21 19:57:21 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:59 2011 -0700" }, "message": "power: pm8921-bms: fix the pc calculation algorithm\n\nThe current algorithm compares if an ocv is between two temperature\ncolumns of the same row. This is not valid since the data in one\ntemperature column is collected independently of the data in another\ntemperature column.\nIt is incorrect to assume a relation between ocv values for the same\npercent row for different temeperature columns.\n\nFix it by finding a percent charge for a bounding temperatures and\nthen interpolating these percent charges based on battery temperature.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "9825dc6c795e9c771b5092e488d3d475a108f192", "tree": "1ccc82862ff468263d55f8804a39894becfb79de", "parents": [ "cfca519f00b9651f86887fbff8a784fcfc8c03d9" ], "author": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Tue Jul 26 10:47:46 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:59 2011 -0700" }, "message": "msm_serial_hs_lite: Add support for higher baud rate\n\nCurrently driver supports max baud rate as 115200 bps.\nThis change allows to use higher baud rate like 230400 bps\nand 460800 bps.\n\nCRs-fixed: 298417\nSigned-off-by: Mayank Rana \u003cmrana@codeaurora.org\u003e\n" }, { "commit": "cfca519f00b9651f86887fbff8a784fcfc8c03d9", "tree": "4d4245f9903d14a1b10a31a503c3e855ab59027e", "parents": [ "529461b70c7dc20b0371e54a63844edae905d7a2" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Sat Jul 23 11:21:40 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:58 2011 -0700" }, "message": "Revert \"workqueue: add workqueue_empty() api\"\n\nThis reverts commit bccb069835ef880e437c68a7fed9529c2549605f.\n\nSince the workqueue code deletes the work before executing it,\nchecking for no work item being currently queued to the workqueue\nis not sufficient to guarantee that all the works have finished\nexecution. Hence, we have moved to using a counter based solution\nand so this change is no longer required.\n\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "529461b70c7dc20b0371e54a63844edae905d7a2", "tree": "da4b84ce6d266268b19d444af479876e98792223", "parents": [ "4e8aada5f34f1a5b92418c0db623785b8a54abfe" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Thu Jul 21 19:13:34 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:58 2011 -0700" }, "message": "power: fix suspend_sys_sync_wait()\n\nSince the workqueue code deletes the work before executing it,\nchecking for no work item being currently queued to the workqueue\nis not sufficient to guarantee that all the works have finished\nexecution.\n\nUse a counter to guarantee that all the pending suspend_sys_sync()\nworks have finished execution before returning from\nsuspend_sys_sync_wait().\n\nCRs-Fixed: 293595\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n\nConflicts:\n\n\tkernel/power/wakelock.c\n" }, { "commit": "4e8aada5f34f1a5b92418c0db623785b8a54abfe", "tree": "55e872eba4bef61e9523cd53b3399423dddff024", "parents": [ "831561ea1079dd11c4a0d13cbb4b5b9b4b70ec12" ], "author": { "name": "Jeremy Gebben", "email": "jgebben@codeaurora.org", "time": "Tue Jul 12 10:07:47 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:57 2011 -0700" }, "message": "msm: kgsl: split mh and mmu initialization\n\nThe MH block should be initialized even if the gpu mmu\nis not enabled so that AXI error interrupts will still\nbe generated.\n\nSigned-off-by: Jeremy Gebben \u003cjgebben@codeaurora.org\u003e\n" }, { "commit": "831561ea1079dd11c4a0d13cbb4b5b9b4b70ec12", "tree": "9500c9a4a14792cacf57dca10c520fdd459c2e39", "parents": [ "72d796e208250c8f070f4f218ee06e70f00cde00" ], "author": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Tue Jul 26 22:51:27 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:56 2011 -0700" }, "message": "ASoC: msm: not call afe_close in prepare\n\nThe original purpose of calling afe_close() is to\nrecover from audio hardware error such as SLIMBUS\noverflow/underflow case. However, soc-dsp framework\ncurrently calls prepare function of backend dai link\nas part of start process of newly opened FE PCM device.\nSo, prepare of backend is called unnecessarily in\nmultiple frontend to single backend case. This behavior\nnot only can manifest undesirable audio artifact but also\ncause instability due to quick stop and start of Q6 AFE\nport. As SLIMBUS overflow/underflow issue encountered\nso far is mostly due to mishandling of hardware bring-up\nsequence, having afe_close() called in prepare does more harm\nthan good. The decision is not to call afe close in prepare\nuntil soc-dsp framework is being enhanced in handling prepare of\nbackend.\n\nSigned-off-by: Patrick Lai \u003cplai@codeaurora.org\u003e\n" }, { "commit": "72d796e208250c8f070f4f218ee06e70f00cde00", "tree": "753115a91d3defef7680bf146ab86a994921ba6c", "parents": [ "b6900e1671a72a50153f511b020431aaf7821974" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Wed Jul 20 22:08:34 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:56 2011 -0700" }, "message": "board: msm8x60: Add delay between toggle of bahama reset\n\nBahama and Timpani devices share the same i2c bus line.\nAdd delay between toggling the reset line for bahama to\nensure each of the device on the i2c has sufficient time\nto reset before bringing the core out of reset. Multiple\nNACK failure\u0027s during bootup on one device could cause\nlockup of the whole bus and other i2c devices could fail\nwhen its core is being bought out of reset.\n\nCRs-Fixed: 296521\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "b6900e1671a72a50153f511b020431aaf7821974", "tree": "8a83975f338bd3d36d99e8b38343651c84274b32", "parents": [ "e2016608c6040751c47da1787a49a29fba550a5c" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Mon Jul 18 10:40:04 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:55 2011 -0700" }, "message": "msm: kgsl: Replace open-coded register call with SCM atomic\n\nInstead of open-coding the SCM register calling convention, use\nthe SCM atomic apis.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "e2016608c6040751c47da1787a49a29fba550a5c", "tree": "d05fa3b5aa7a8b2575a35fa30b2e94f42393abaa", "parents": [ "551cd9645099b9b63e628a624f3b2932dc354f18" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Mon Jul 18 10:36:54 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:54 2011 -0700" }, "message": "msm: scm-io: Replace open-coded register call with SCM atomic\n\nInstead of open-coding the SCM register calling convention, use\nthe SCM atomic apis.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "551cd9645099b9b63e628a624f3b2932dc354f18", "tree": "d3e0e4aaa229e97c1107f3976940b0d4983df2cd", "parents": [ "ccd78a45dcd1d8255edddcf9062e0b0d34d8d27f" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Mon Jul 18 10:33:45 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:54 2011 -0700" }, "message": "msm: scm: Add atomic SCM APIs\n\nThe atomic SCM APIs are useful for commands that are guaranteed\nby the secure side to be uninterruptable, atomic and SMP safe.\nThe calling convention use registers for passing parameters and\nreturn values between the secure and non-secure side. Support\nthis interface with scm_call_atomic[1-2]() functions\ncorresponding to the number of arguments passed.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "ccd78a45dcd1d8255edddcf9062e0b0d34d8d27f", "tree": "767613183c208ce3f3e2308b1665ad18697dc5f1", "parents": [ "5b7afbc1066df49777ae80aad05de46ad1266d45" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Tue Jul 26 17:28:08 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:53 2011 -0700" }, "message": "arm: mm: Exclude additional mem_map entries from free\n\nA previous patch addressed the issue of move_freepages_block()\ntrampling on erronously freed mem_map entries for the bank end\npfn. We also need to restrict the start pfn in a\ncomplementary manner.\n\nAlso make macro usage consistent by adopting the use of\nround_down and round_up.\n\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "5b7afbc1066df49777ae80aad05de46ad1266d45", "tree": "127c2a9778495e55884e4c1770a58a7d2faee022", "parents": [ "9cbf523afd1bafb4a274ffe8445d112c676dce8c" ], "author": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Wed Jul 27 15:19:45 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:53 2011 -0700" }, "message": "msm: camera: Change max number of application buffers\nallowed.\n\nDuring AXI configuration, the buffer addresses are\nstored in a msm_pmem_region array of size 16. This\nlimits the maximum number of buffers that can be\nused by the application to 16. But in ZSL mode,\nthe application can allocate more than 16 buffers.\nIncrease the maximum number of buffers and\ndynamically allocate memory for this structure.\n\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\n" }, { "commit": "9cbf523afd1bafb4a274ffe8445d112c676dce8c", "tree": "a23e7560186355e66d87e949967b7f384a0307a8", "parents": [ "63e1f9ff178a33a955fa81c196e58fbfb9dab057" ], "author": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Mon Jul 25 15:52:51 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:52 2011 -0700" }, "message": "msm: camera: Fix raw snapshot functionality.\n\n- Thumbnail image is not generated in case of\n raw snapshot. Hence dont configure thumbnail\n buffers in case of raw snapshot.\n- Remove couple of duplicate log messages.\n\nCRs-Fixed: 297230\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\n" }, { "commit": "63e1f9ff178a33a955fa81c196e58fbfb9dab057", "tree": "aa1ddd1bfc6c446c0183251554b5a6eec55dbe8c", "parents": [ "89d8c1dff8e1816b41d705c6d76266daf4b4d77e" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Jul 26 15:29:05 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:51 2011 -0700" }, "message": "regulator: pm8921-regulator: Add enable_time platform data entry\n\nAdd an enable_time platform data member which can be used to specify\nthe board dependent enable (rise) time of each regulator.\n\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "89d8c1dff8e1816b41d705c6d76266daf4b4d77e", "tree": "a9d9ae9171f78fb24e9693d0e6c5115d2008d51a", "parents": [ "4bdf0232f09e3dbae6fcf4b30a72879291190175" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Wed Jul 27 12:08:34 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:51 2011 -0700" }, "message": "msm: camera: Improve camera IRQ stability\n\nCSI irq is trigger too often causing the platform to be unstable.\nModified csid and csiphy irq to only trigger for errors.\n\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "4bdf0232f09e3dbae6fcf4b30a72879291190175", "tree": "929fa3f16a0af9bc42c1541c8e632e81a70dceed", "parents": [ "160633ed064979143d94466ef19b32fea5703d34" ], "author": { "name": "Jeffrey Chuang", "email": "fchuang@codeaurora.org", "time": "Thu Jul 21 12:58:58 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:50 2011 -0700" }, "message": "defconfig: msm8960: Disable Ethernet Driver\n\nDisable CONFIG_KS8851\n\nSigned-off-by: Jeffrey Chuang \u003cfchuang@codeaurora.org\u003e\n" }, { "commit": "160633ed064979143d94466ef19b32fea5703d34", "tree": "b9413f916322366b737c2348663d9a8dc64c0d86", "parents": [ "3893b3b807fceedc10cb5e8bd39757cdb2ec4737" ], "author": { "name": "Yan He", "email": "yanhe@codeaurora.org", "time": "Thu Jun 30 12:18:56 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:49 2011 -0700" }, "message": "platform-drivers: msm: sps: add DFAB clock support for SPS driver.\n\nSigned-off-by: Yan He \u003cyanhe@codeaurora.org\u003e\n" }, { "commit": "3893b3b807fceedc10cb5e8bd39757cdb2ec4737", "tree": "198f411100f328add7a4b847b874689728cd10cc", "parents": [ "4288de3af5711a81e86eb33d29f06996a95eb94f" ], "author": { "name": "Gagan Mac", "email": "gmac@codeaurora.org", "time": "Mon Jul 11 11:20:26 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:49 2011 -0700" }, "message": "msm: 8960: Correct port representation for nodes\n\nMultiple ports for a single master should be treated as\nseparate nodes to enable halting of individual ports.\n\nMultiple ports for a single slave should be combined under\nthe same slave node to aid division of bandwidth from gateway.\n\nSigned-off-by: Gagan Mac \u003cgmac@codeaurora.org\u003e\n" }, { "commit": "4288de3af5711a81e86eb33d29f06996a95eb94f", "tree": "ad20c7e42011a94629e31b3d4a1b5d940e539fd9", "parents": [ "30011d2028df9a298bec719b3d7c7bb8010798b6" ], "author": { "name": "Deepika Pepakayala", "email": "deepikap@codeaurora.org", "time": "Fri Jul 15 17:40:12 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:48 2011 -0700" }, "message": "msm: vidc: Set Y and C size registers to allocated size.\n\nCurrently the Y and C sizes are set based on the\nsize of video being decoded. In case of smooth\nstreaming, decoded sizes are not the same as allocated\nsizes. This change will set the Y and C sizes to\nallocated sizes.\n\nSigned-off-by: Deepika Pepakayala \u003cdeepikap@codeaurora.org\u003e\n" }, { "commit": "30011d2028df9a298bec719b3d7c7bb8010798b6", "tree": "774fc0e0200d4faa966848be0f69b8452067f7b3", "parents": [ "c63847bcddab79bbd5850322843bf0b4ae098745" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Mon Jul 25 20:32:04 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:47 2011 -0700" }, "message": "msm: clock-8x60: Don\u0027t disable clocks in reg_init\n\nPrevent the register initialization function from disabling\nclocks that are already running. This will allow enabled\nclocks that are not rate-settable to be smoothly handed off\nfrom bootloader to Linux control.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "c63847bcddab79bbd5850322843bf0b4ae098745", "tree": "0b9efc063334ee22824b31892a1353c13bf76167", "parents": [ "0581896d5d9e1623cc1c93050f67f57896e0d699" ], "author": { "name": "Ananda Kishore", "email": "kananda@codeaurora.org", "time": "Mon Jul 18 19:02:15 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:47 2011 -0700" }, "message": "vidc: add change to print MFC firmware version\n\nCRs-Fixed: 296531\nSigned-off-by: Ananda Kishore \u003ckananda@codeaurora.org\u003e\n" }, { "commit": "0581896d5d9e1623cc1c93050f67f57896e0d699", "tree": "ac4e7ab88068e1c4831b0961297dab7c703e25bd", "parents": [ "7fb0b25174171a93eabc3e573e4add3b1fcc9bb6" ], "author": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Tue Jul 19 16:43:28 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:46 2011 -0700" }, "message": "msm: 8064: add support for DMOV in 8064 baseport.\n\nAdded io mapping for dmov device.\nAdded the platform device for dmov. The device is using security\ndomain 0 for now until TZ comes in, at which point this would\nbe moved to security domain 1.\n\nSigned-off-by: Joel King \u003cjoelking@codeaurora.org\u003e\n" }, { "commit": "7fb0b25174171a93eabc3e573e4add3b1fcc9bb6", "tree": "8987d590f2e7dc26fd634c0936889e4733bf9cce", "parents": [ "151d00111f898e4dcd3fd5502f44ffe8f0567a2b" ], "author": { "name": "Larry Bassel", "email": "lbassel@codeaurora.org", "time": "Fri Jul 22 14:18:50 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:46 2011 -0700" }, "message": "msm: do not create memory pools from unstable memory\n\nWhen reserving memory for memory pools, do not use\nmemory which can potentially be powered off.\n\nSigned-off-by: Larry Bassel \u003clbassel@codeaurora.org\u003e\n" }, { "commit": "151d00111f898e4dcd3fd5502f44ffe8f0567a2b", "tree": "b9a50c8cfd5f43714e30fbfa27fa45c4ca76b12e", "parents": [ "16346b0a112adc011ef9604ac4f8335da9fdd109" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Tue May 31 16:37:17 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:45 2011 -0700" }, "message": "msm: clock-8960: Remove Q6 PLL4 proxy vote\n\nNow that the Q6 is properly voting for PLL4 this can be safely\nremoved.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "16346b0a112adc011ef9604ac4f8335da9fdd109", "tree": "dd4a0600a467291b1700c0bb37386a56752f37a3", "parents": [ "851bdc41e10628bbe6a4986d0f17e9d943f73f6f" ], "author": { "name": "Tarun Karra", "email": "tkarra@codeaurora.org", "time": "Sun Jul 24 15:04:26 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:44 2011 -0700" }, "message": "msm: kgsl: shaders must be repartitioned during gmem save/restore\n\nSigned-off-by: Tarun Karra \u003ctkarra@codeaurora.org\u003e\n" }, { "commit": "851bdc41e10628bbe6a4986d0f17e9d943f73f6f", "tree": "c19f634cdfe7dc7857c36268d49f55902dd25dfc", "parents": [ "a513aa8dbf25a12c9f0064759b4811c19f2d0ee8" ], "author": { "name": "Suresh Vankadara", "email": "svankada@codeaurora.org", "time": "Thu Jul 21 19:54:20 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:44 2011 -0700" }, "message": "msm: camera: Fix GPIO issues in sensor drivers\n\nKeep GPIO 153 and 151 to low power state when\ncamera is not in active state.\n\nCRs-Fixed: 294992\nSigned-off-by: Suresh Vankadara \u003csvankada@codeaurora.org\u003e\n" }, { "commit": "a513aa8dbf25a12c9f0064759b4811c19f2d0ee8", "tree": "13fbdfd770cba00519c52a6ff6991bd361111ed7", "parents": [ "edd5fd79fb7eb5b2e8937a2a87c2ee453e204377" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Mon Jul 18 15:14:28 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:43 2011 -0700" }, "message": "msm: Move gpiomux.h to include/mach\n\nThe gpiomux interface is required for drivers\nto manipulate the pinmux functionality of their gpios\nat runtime.\n\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "edd5fd79fb7eb5b2e8937a2a87c2ee453e204377", "tree": "71b7f6c86510c8ed70e6d45f0b57dfbe666eb7eb", "parents": [ "405dc3051b06637b6a38aa6b1f4da1660cff37d0" ], "author": { "name": "Amy Maloche", "email": "amaloche@codeaurora.org", "time": "Wed Jun 22 18:50:21 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:42 2011 -0700" }, "message": "input: cyttsp-i2c: choose firmware start address\n\nFirmware start address changes from GEN3 to GEN2 devices.\nSelect proper firmware start address based on chip generation.\n\nSigned-off-by: Amy Maloche \u003camaloche@codeaurora.org\u003e\n" }, { "commit": "405dc3051b06637b6a38aa6b1f4da1660cff37d0", "tree": "7f1e7a6efb94ef7a0d20dbda722d390ea5e1a2de", "parents": [ "5a3695011acfed1787ad3bbad90c3fc5bd239134" ], "author": { "name": "kuogee hsieh", "email": "khsieh@codeaurora.org", "time": "Thu Jul 21 15:06:59 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:42 2011 -0700" }, "message": "msm_fb: display: add ioctl for mixer info\n\nAdd new ioctl to allow user to query mdp mixer detail configuration.\n\nSigned-off-by: Kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "5a3695011acfed1787ad3bbad90c3fc5bd239134", "tree": "9933b77def5b64f763ac7cc91847d3220c2b31f6", "parents": [ "70765cd7a317954776aa4b556d8a74091edfa051" ], "author": { "name": "Manish Dewangan", "email": "manish@codeaurora.org", "time": "Mon Jul 25 20:00:41 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:41 2011 -0700" }, "message": "msm: audio: qdsp5: Add timeout for read call of pcm in driver\n\nAny unexpected events such as sdcard removal can delay the\nreading of recorded packets and results in pcm driver running\nout of frame buffers. But read calls of application gets blocked\nfor such unknown or abrupt errors.\n\nAdd timeout of two seconds for read call in pcm in driver to avoid\napplication getting blocked on driver read calls in any error cases\nwhich can result in improper application behavior.\n\nSigned-off-by: Manish Dewangan \u003cmanish@codeaurora.org\u003e\n" }, { "commit": "70765cd7a317954776aa4b556d8a74091edfa051", "tree": "4b5e922681bee32f0427fee2e6375d144e6f9f9e", "parents": [ "9a9e76e0def4526129321eae6564b4f29332e6b3" ], "author": { "name": "Swaminathan Sathappan", "email": "Swami@codeaurora.org", "time": "Tue Jul 19 18:42:47 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:40 2011 -0700" }, "message": "msm: audio: qdsp6v2: Add support for aac dual mono playback\n\nSigned-off-by: Swaminathan Sathappan \u003cSwami@codeaurora.org\u003e\n" }, { "commit": "9a9e76e0def4526129321eae6564b4f29332e6b3", "tree": "cb2e3aac22b381878e3e62aec5725b1ad825c782", "parents": [ "d090389b32a6c482d9a7c08a4f6e7ca09befbb54" ], "author": { "name": "Vijayakumar Muthuvel Manickam", "email": "vmuthuve@codeaurora.org", "time": "Thu Jun 30 11:22:25 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:40 2011 -0700" }, "message": "mfd: marimba_core: Add debugfs interface for ADIE\n\nCreate debugfs entry for Marimba, Timpani, Bahama ADIE\n\nSigned-off-by: Vijayakumar Muthuvel Manickam \u003cvmuthuve@codeaurora.org\u003e\n" }, { "commit": "d090389b32a6c482d9a7c08a4f6e7ca09befbb54", "tree": "c3b175a94974ad73de8a1f6986aefed76b4ffa52", "parents": [ "15f864685553406ab4dbb3ac7d40a0dc303df9a6" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Jul 14 16:08:30 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:39 2011 -0700" }, "message": "msm: rpm-regulator-8960: change request packing format\n\nChange the packing format of LDO and SMPS RPM regulator requests\nto mirror changes made to interface on the RPM side.\n\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "15f864685553406ab4dbb3ac7d40a0dc303df9a6", "tree": "94b9ad83a61e657c9592908b94bd68f88276386b", "parents": [ "603d1cb1436484d36ea7c2c7119af683445b4af8" ], "author": { "name": "Yan He", "email": "yanhe@codeaurora.org", "time": "Mon Jul 25 10:36:37 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:39 2011 -0700" }, "message": "platform-drivers: msm: sps: add spinlock for BAM\n\nWhen client drivers use spinlock and embrace SPS APIs that use mutex,\nscheduling error may happen. Use spinlock for these SPS APIs instead.\n\nSigned-off-by: Yan He \u003cyanhe@codeaurora.org\u003e\n" }, { "commit": "603d1cb1436484d36ea7c2c7119af683445b4af8", "tree": "795856e0ec3876e536645968a8a704ed1f131948", "parents": [ "96a9f90882a342f307761c0333899ab97fed2bc6" ], "author": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Sun Jul 24 17:17:04 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:38 2011 -0700" }, "message": "usb: gadget: Check for pending requests before priming the ep\n\nFor any data to be transferred over usb endpoint, USB S/W\nconfigures the data to be transferred in queue heads and transfer\ndescriptors and requests h/w to process the data by priming the\nendpoint. Sometimes it is observed that endpoint priming is\nfailing when usb requests are being queued back to back. Although\nthe h/w is recovering later, some unprocessed requests are\npending in ep requests queue. To avoid this issue, check for\nstale requests before priming the endpoint and add the current\nrequest at the endpoint of request queue.\n\nSigned-off-by: Vamsi Krishna \u003cvskrishn@codeaurora.org\u003e\n" }, { "commit": "96a9f90882a342f307761c0333899ab97fed2bc6", "tree": "4fcf73126a2d03a2c8191f7b884390071a94438e", "parents": [ "e9cb532c807c61afb1f692d013da6a3e88028e90" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Mon Jul 18 18:43:00 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:37 2011 -0700" }, "message": "msm: pil: Replace incorrect offset check\n\nThis check is practically useless as it doesn\u0027t ensure anything\nbesides that the program headers start within the file size. It\u0027s\nstill possible for the program headers to extend beyond the size\nof the data passed in. Fix this check by actually ensuring the\nsize of the buffer is enough to contain at least the program\nheaders so we don\u0027t access unmapped memory.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "e9cb532c807c61afb1f692d013da6a3e88028e90", "tree": "a441369902e241f541f1751e5d7cf4ef1b7ab62f", "parents": [ "cb791443cfcd968d3eee148fd731df2f72925fb7" ], "author": { "name": "Oluwafemi Adeyemi", "email": "aadeyemi@codeaurora.org", "time": "Wed Jul 20 14:46:52 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:37 2011 -0700" }, "message": "msm: rmt_storage: Initialize force_sync as read sysfs entry\n\nSigned-off-by: Oluwafemi Adeyemi \u003caadeyemi@codeaurora.org\u003e\n" }, { "commit": "cb791443cfcd968d3eee148fd731df2f72925fb7", "tree": "2dd90478c394c95ee95d3422982908dfb560728c", "parents": [ "8dddd75ae0b91a2d6664aac865d3ac1082a67555" ], "author": { "name": "Oluwafemi Adeyemi", "email": "aadeyemi@codeaurora.org", "time": "Mon Jul 11 22:51:25 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:36 2011 -0700" }, "message": "mmc: msm_sdcc: Send CMD52 after every CMD53 write\n\nOn a completion of a CMD53 write, send a dummy CMD52\nbefore reporting completion to client.\n\nSigned-off-by: Oluwafemi Adeyemi \u003caadeyemi@codeaurora.org\u003e\nSigned-off-by: Sahitya Tummala \u003cstummala@codeaurora.org\u003e\n" }, { "commit": "8dddd75ae0b91a2d6664aac865d3ac1082a67555", "tree": "4a5e02451babf0a89c3122e0aa4a619223fbd419", "parents": [ "e9a54343561fd5852a2373b5d42f5a82fdda09f6" ], "author": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Wed Jul 13 11:19:58 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:35 2011 -0700" }, "message": "msm_serial_hs_lite: Add support of loopback mode for each uart port\n\nThis change allows to use debugfs entry called loopback.uart_id to\nenable/disable uartdm internal loopback mode.\ne.g. for /dev/ttyHSL0 device,\nit creates \u003cdebugfs_dir\u003e/msm_serial_hsl/loopback.0\n\nSigned-off-by: Mayank Rana \u003cmrana@codeaurora.org\u003e\n" }, { "commit": "e9a54343561fd5852a2373b5d42f5a82fdda09f6", "tree": "c7061e82069a34c2ae40ff2eb86555072c675812", "parents": [ "c4b8b2fb9d783be26b85381b3618bbe253a75b89" ], "author": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Wed Jun 29 20:27:08 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:35 2011 -0700" }, "message": "msm_serial_hs_lite: Reset uartdm core after changing baud rate\n\nRxstale interrupt is not working after changing the baud rate once device\nis opened. It is required to reset the receiver and transmitter after\nmodifying the IPR register which is not done in current programming\nsequence. This change resets uartdm core i.e. receiver, transmitter, error\nstate, break condition, CTS and RFR which fixes the issue.\n\nWith this change, remove programming sequence used in startup as opening\nthe device node will always calls set_termios after startup.\n\nCRs-Fixed: 294380\nSigned-off-by: Mayank Rana \u003cmrana@codeaurora.org\u003e\n" }, { "commit": "c4b8b2fb9d783be26b85381b3618bbe253a75b89", "tree": "664f4284a638cfeca69550863956c7562d9029a4", "parents": [ "5cbaf3e1a8623325997247578800c49c82aa622a" ], "author": { "name": "kuogee hsieh", "email": "khsieh@codeaurora.org", "time": "Tue Jul 12 13:32:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:34 2011 -0700" }, "message": "msm_fb: display: change mdp clock while mdp is idle\n\nMdp clock need to be adjusted at run time base on the\nperformance level. However mdp clock can only be changed\nwhen mdp blending/dma engine is idle.\n\nSigned-off-by: Kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "5cbaf3e1a8623325997247578800c49c82aa622a", "tree": "25f84cbfce5edcdf8f81cf564d1b2598ef6c2d8a", "parents": [ "c001dc31f98aad02259b31951c6c48067454273a" ], "author": { "name": "Ankit Premrajka", "email": "ankitp@codeaurora.org", "time": "Thu Jul 21 11:14:56 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:34 2011 -0700" }, "message": "msm-camera: fix subsystem ID address in JPEG\n\nThe address of the subsystem id stored in the jpeg\nbuffer structure was becoming invalid. This happened\nbecause the buffer used for mapping was copied over to\na duplicate place and the second buffer was used for\nunmapping, while the first one was freed.\n\nSigned-off-by: Ankit Premrajka \u003cankitp@codeaurora.org\u003e\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "c001dc31f98aad02259b31951c6c48067454273a", "tree": "148d2f42eae9c2d146adc5e87d1a65472aad92c6", "parents": [ "53a9083107fbb4df41b22b15f56501b920a0f61d" ], "author": { "name": "Shuzhen Wang", "email": "shuzhenw@codeaurora.org", "time": "Fri Jul 15 13:51:52 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:33 2011 -0700" }, "message": "camera: vfe32: Enable Zero Shutter Lag mode support.\n\n- Add bus scaling table for ZSL mode.\n- Add AXI configuration and interrupts handling for ZSL.\n- Add missing VFE commands of XBAR configuratin.\n\nSigned-off-by: Shuzhen Wang \u003cshuzhenw@codeaurora.org\u003e\n" }, { "commit": "53a9083107fbb4df41b22b15f56501b920a0f61d", "tree": "625f5caad691517a31595be29685d79d228e3c72", "parents": [ "ca681569d396c54bb3a192bdc5434c5a889e0ce5" ], "author": { "name": "Mingcheng Zhu", "email": "mingchen@codeaurora.org", "time": "Wed Jul 20 21:19:28 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:32 2011 -0700" }, "message": "msm-camera: fix the stop recording crash\n\ndo not swap ping/pong buffer when no free buffer\n\nCRs-fixed: 296858\n\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "ca681569d396c54bb3a192bdc5434c5a889e0ce5", "tree": "2fbfefd13569f73ca74a88601e21304032f005d1", "parents": [ "c6864b8db38bd6ee700d862df15380eb95234c25" ], "author": { "name": "Mingcheng Zhu", "email": "mingchen@codeaurora.org", "time": "Mon Jul 25 20:44:23 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:32 2011 -0700" }, "message": "msm-camera: initial vpe and divert frame implementation\n\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "c6864b8db38bd6ee700d862df15380eb95234c25", "tree": "18e204098354b30563684ceff3863b21d1e48531", "parents": [ "d71946b2ad838e897f450bb8d1ad6eb86bff7298" ], "author": { "name": "Ankit Premrajka", "email": "ankitp@codeaurora.org", "time": "Fri Jul 15 11:43:41 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:31 2011 -0700" }, "message": "msm-camera: add SMMU code for use with videobuf2 framework\n\nSigned-off-by: Ankit Premrajka \u003cankitp@codeaurora.org\u003e\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "d71946b2ad838e897f450bb8d1ad6eb86bff7298", "tree": "a35756cab2d3e5d0c595fbe48bb0f83110d1d867", "parents": [ "4950550ed4974d3f971892777bab9bc074cecc2c" ], "author": { "name": "Shuzhen Wang", "email": "shuzhenw@codeaurora.org", "time": "Tue Jul 19 15:10:58 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:30 2011 -0700" }, "message": "msm-camera: v4l2: Use ktime_get_ts to get timestamp.\n\nUsing ktime_get_ts and converting to timeval matches\nwith system time in user space. This eliminates the\nAV sync issue between video and audio.\n\nSigned-off-by: Shuzhen Wang \u003cshuzhenw@codeaurora.org\u003e\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "4950550ed4974d3f971892777bab9bc074cecc2c", "tree": "b37878f7b1da8699b3b8795ba3512da9d51a8ce0", "parents": [ "0fb9dcfbc652ed617ceb244bd8a9201d00a124fe" ], "author": { "name": "Mingcheng Zhu", "email": "mingchen@codeaurora.org", "time": "Tue Jul 19 20:44:36 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:30 2011 -0700" }, "message": "msm: Add new msm_buffer and event structs and event defines\n\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "0fb9dcfbc652ed617ceb244bd8a9201d00a124fe", "tree": "b39114063f8d400ad220566cd25b92f79589683d", "parents": [ "9812bd34ec034b4a78ed1c1c5f6fbd1ca3d1b43e" ], "author": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Sun Jul 17 12:31:53 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:29 2011 -0700" }, "message": "msm-camera: configure preview and recording buffers\nseperately.\n\ndecouple preview and recording path configuration\nby configuring the buffers during preview start\nand recording start respectively.\n\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "9812bd34ec034b4a78ed1c1c5f6fbd1ca3d1b43e", "tree": "63cb1ccdc000bc4bb1b4d41b1b42a6be066feb8f", "parents": [ "7323b78c60c986f268ac4aeb6a2493082fd63cd5" ], "author": { "name": "Mingcheng Zhu", "email": "mingchen@codeaurora.org", "time": "Fri Jul 22 22:57:11 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:28 2011 -0700" }, "message": "msm camera: migrate to videobuf2 framework\n\nadd necessary changes in camera driver to\nmigrate to videobuf2 framework.\n\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n\nConflicts:\n\n\tdrivers/media/video/Makefile\n" }, { "commit": "7323b78c60c986f268ac4aeb6a2493082fd63cd5", "tree": "14118f95fd8ade7502923475f46f9251ea672bd0", "parents": [ "f614c7221e4b92d0f3c16a8876f24af5b2880bc4" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Mon Jul 25 13:23:59 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:28 2011 -0700" }, "message": "msm: 8x60: remove always ON vote for eMMC VCC rail\n\neMMC card can be put in sleep by sending CMD5 during suspend\nso we can turn off the eMMC VCC rail to save power.\n\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "f614c7221e4b92d0f3c16a8876f24af5b2880bc4", "tree": "9fb54bbdaba6ede994762b7f193ecb400f68f33c", "parents": [ "8df15da6615f4cbebdbd3fb6e97734a515027f96" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Thu Jul 21 17:20:55 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:27 2011 -0700" }, "message": "msm: 8960: remove always ON vote for eMMC VCC rail\n\neMMC card can be put in sleep by sending CMD5 during suspend\nso we can turn off the eMMC VCC rail to save power.\n\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "8df15da6615f4cbebdbd3fb6e97734a515027f96", "tree": "9331e4807fe4457624028e9334cbb487dcd89f2f", "parents": [ "09fd3ad1c66a791aa54f1ded42eeb7c7c5c7746e" ], "author": { "name": "Balaji T K", "email": "balajitk@ti.com", "time": "Wed Jul 13 20:06:27 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:27 2011 -0700" }, "message": "mmc: core: put eMMC in sleep (cmd5) mode before suspend\n\nPut MMC to sleep if it supports SLEEP/AWAKE (CMD5) in the mmc suspend\nto minimize power consumption.\n\nSigned-off-by: Balaji T K \u003cbalajitk@ti.com\u003e\nAcked-by: Venkatraman S \u003csvenkatr@ti.com\u003e\nSigned-off-by: Chris Ball \u003ccjb@laptop.org\u003e\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "09fd3ad1c66a791aa54f1ded42eeb7c7c5c7746e", "tree": "36fc48d9d8059a978fdac5e757b1c88bbb9aa985", "parents": [ "650c22c765b832bd383c310294dc52c4e3fa7255" ], "author": { "name": "Mona Hossain", "email": "mhossain@codeaurora.org", "time": "Thu Jul 14 09:12:07 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:26 2011 -0700" }, "message": "hw_random: msm: Remove PRNG hardware configuration\n\nLSFR and CONFIG registers are configured by secure domain\ncode and XPU protected.\n\nCRs-Fixed: 284133\nSigned-off-by: Mona Hossain \u003cmhossain@codeaurora.org\u003e\n" }, { "commit": "650c22c765b832bd383c310294dc52c4e3fa7255", "tree": "3a832f3065e304dff2b4ce70fdee65668999a60f", "parents": [ "f9258172263a39b1cb5661ecbf2967c4de968e28" ], "author": { "name": "Mona Hossain", "email": "mhossain@codeaurora.org", "time": "Tue Jul 19 09:54:19 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:25 2011 -0700" }, "message": "crypto: Fix race conditons and synchronization issues\n\n- Fix locking mechanism: Add ref count for locking and\n protect ce lock reference count\n- Fix race conditions with processing sha request.\n\nSigned-off-by: Mona Hossain \u003cmhossain@codeaurora.org\u003e\n" }, { "commit": "f9258172263a39b1cb5661ecbf2967c4de968e28", "tree": "4332f372fa66d3a34826a6e7068d9bf109d3d3b4", "parents": [ "7661a450d98b94a655373c0e5d5d79749b2ff6e2" ], "author": { "name": "Rajesha Kini", "email": "rkini@codeaurora.org", "time": "Wed Jul 20 21:51:55 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:25 2011 -0700" }, "message": "msm: audio: voicepcm: Added snd pcm client driver\n\nAdded support for snd pcm client driver. Which\nprovides interface to write pcm samples to voice path.\n\nSigned-off-by: Rajesha Kini \u003crkini@codeaurora.org\u003e\n" }, { "commit": "7661a450d98b94a655373c0e5d5d79749b2ff6e2", "tree": "1982bbbec2e045899f7ad9cfaae5c3f13cfb0a82", "parents": [ "5a19c68d63da33710ed52a974a996f03a706b84f" ], "author": { "name": "Sahitya Tummala", "email": "stummala@codeaurora.org", "time": "Mon Jul 18 13:28:35 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:24 2011 -0700" }, "message": "mmc: msm_sdcc: Add debug prints to runtime suspend/resume\n\nSigned-off-by: Sahitya Tummala \u003cstummala@codeaurora.org\u003e\n" }, { "commit": "5a19c68d63da33710ed52a974a996f03a706b84f", "tree": "33799729701b9b6af844c55f55053b69045bdab6", "parents": [ "373d1d02ff733804598a6a1894c42dcc9978abbe" ], "author": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Sat Jul 23 11:34:34 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:23 2011 -0700" }, "message": "Revert \"msm: camera: YV12 video support\"\n\nThis reverts commit 66882a5046143601429632a0b589d9ffeeb3c668.\nThis change will be submitted later.\n\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\n" }, { "commit": "373d1d02ff733804598a6a1894c42dcc9978abbe", "tree": "0d48297623b8a78b379f009bcbe1ac23c9671ba3", "parents": [ "c7c0db6840c8d6b28938857eb208c67f1696516e" ], "author": { "name": "Jeffrey Chuang", "email": "fchuang@codeaurora.org", "time": "Fri Jul 22 16:49:33 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:22 2011 -0700" }, "message": "Revert \"Revert \"msm: 8960: Enable bus scaling on 8960\".\"\n\nThis reverts commit 133580fadbade969050b2a8dd9f7e9451397bfa7.\n\nSigned-off-by: Jeffrey Chuang \u003cfchuang@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/configs/msm8960_defconfig\n" }, { "commit": "c7c0db6840c8d6b28938857eb208c67f1696516e", "tree": "81b16037fc4a1735918d6ac0883b3fa19a553384", "parents": [ "d9040ad20570c394de4104d151a50cb1944cb756" ], "author": { "name": "Gagan Mac", "email": "gmac@codeaurora.org", "time": "Wed Jul 20 13:07:29 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:22 2011 -0700" }, "message": "msm: msm_bus: Interleaving related corrections\n\nFix the division of bandwidth between slaves with multiple ports.\nSince, interleaving changes involve exposing multiple ports for\na given master, config functions need to be changed for\nhalting/unhalting the right ports.\n\nSigned-off-by: Gagan Mac \u003cgmac@codeaurora.org\u003e\n" }, { "commit": "d9040ad20570c394de4104d151a50cb1944cb756", "tree": "15ba6e140bd9775ea81f86a8d6d6a7ece076f7db", "parents": [ "b4126da5e8d59ea9dcd951a8824c8ad90a517bd1" ], "author": { "name": "Eugene Seah", "email": "eseah@codeaurora.org", "time": "Mon Jul 11 13:20:54 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:21 2011 -0700" }, "message": "msm: rpm: Update System Fabric ARB RPM-id mapping on 8960\n\nSystem Fabric ARB RPM resource was changed from 27 to 29 4-byte words,\nupdate the RPM-id mapping to reflect this.\n\nSigned-off-by: Eugene Seah \u003ceseah@codeaurora.org\u003e\n" }, { "commit": "b4126da5e8d59ea9dcd951a8824c8ad90a517bd1", "tree": "9aecf45748517d14ee4afa97dca6139cc327c672", "parents": [ "f1fdaffaa75daf8323e5d514bb1cb0bac0c2f84e" ], "author": { "name": "Larry Bassel", "email": "lbassel@codeaurora.org", "time": "Mon Jul 18 14:31:33 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:21 2011 -0700" }, "message": "msm: automatically size unstable memory on 8960\n\nOn 8960, all memory banks except the lowest one\n(where the kernel lives) are unstable (i.e. may\nbe powered off under DMM).\n\nThis patch temporarily hard codes the bank\nsize to 512M, a later patch will allow us to\nobtain this from shared memory.\n\nSigned-off-by: Larry Bassel \u003clbassel@codeaurora.org\u003e\n" }, { "commit": "f1fdaffaa75daf8323e5d514bb1cb0bac0c2f84e", "tree": "bd9e010eff50baecb631cb2b0af717f407cf7e9d", "parents": [ "675b31fc19e7da56c281268a792a4590d334e094" ], "author": { "name": "Gregory Bean", "email": "gbean@codeaurora.org", "time": "Fri Jul 22 11:12:16 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:20 2011 -0700" }, "message": "checkpatch: remove \u0027static const char * const\u0027 check\n\nWhile this check is valid in theory, it generates a plethora\nof false positives on ALSA drivers and ends up causing more trouble\nthan it saves.\n\nSigned-off-by: Gregory Bean \u003cgbean@codeaurora.org\u003e\n" }, { "commit": "675b31fc19e7da56c281268a792a4590d334e094", "tree": "f248b56df7d3b2e07556750d4d022fb16f6ef7cf", "parents": [ "d3fb9bb50ca92263f402888dd437ff5bf18dd95d" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Tue Jul 19 10:37:43 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:19 2011 -0700" }, "message": "msm: Allow iova address alignment specification\n\nSome clients have specific alignment requirements for\niova addresses. Allow those requirements to be specified\nvia the upper bits of the flag field. Since all iommu\nalignment must be at least 4k, the lower bits can specify\nother options while the upper bits specify the alignment.\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "d3fb9bb50ca92263f402888dd437ff5bf18dd95d", "tree": "09a162fb9819b4afd0991727d0992ef830232504", "parents": [ "29eb744d8dfb83c309ef22589ee20b63bbb7080c" ], "author": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Tue Jul 12 17:20:16 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:19 2011 -0700" }, "message": "usb: gsmd: Add platform driver corresponding to smd channel\n\nUSB shared memory DUN(dial up networking) driver re-tries multiple times\nto open smd channel, due to delay in smd driver initialization and modem\nload during boot up. Instead, register a platform driver with smd channel\nname. Whenever specific SMD channel is opened by modem, a corresponding\nplatform device would be added resulting in probe of platform driver being\ncalled. In the probe function, DUN driver opens up SMD channel\n\nSigned-off-by: Hemant Kumar \u003chemantk@codeaurora.org\u003e\n" }, { "commit": "29eb744d8dfb83c309ef22589ee20b63bbb7080c", "tree": "3d175c09b9605f49185d80d08ae47bb4e96e27da", "parents": [ "c6299dea34ba663b81af74a90305b67031683aff" ], "author": { "name": "Helen Zeng", "email": "xiaoyunz@codeaurora.org", "time": "Mon Jun 20 11:06:29 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:18 2011 -0700" }, "message": "ASoC: msm: qdsp6: Add out of band calibration in voice driver\n\nAdd codes to send physical address and memory size to\nq6 on out of band calibration.\n\nSigned-off-by: Helen Zeng \u003cxiaoyunz@codeaurora.org\u003e\n" }, { "commit": "c6299dea34ba663b81af74a90305b67031683aff", "tree": "c9d50b51bcf67166095796d130656009fa2f3668", "parents": [ "ee1840950afc0eead0f146f945b9f853417cb131" ], "author": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Thu Jul 21 18:18:53 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:17 2011 -0700" }, "message": "msm: sdio_dmux: Clear pending write queue after reset notification\n\nFix issue where clients can get notifications of failed\nwrites before they are notified that a reset has occurred.\n\nSigned-off-by: Vamsi Krishna \u003cvskrishn@codeaurora.org\u003e\n" }, { "commit": "ee1840950afc0eead0f146f945b9f853417cb131", "tree": "66f7c1434bbffb7507902c733f8d4db6eabdadc9", "parents": [ "ff6fbae218452a546924bc015a4b5def42281e74" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Jul 20 18:56:40 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:17 2011 -0700" }, "message": "msm: clock-8960: Remove unnecessary halt_check initialization\n\nThe halt_check field defaults to HALT. Remove explicit\ninitialization to this default value.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "ff6fbae218452a546924bc015a4b5def42281e74", "tree": "c7ff2e1b9d00b0f071e8470bf89e8b9a74b4b013", "parents": [ "7ff0cf49995d22fddaa90cea95dac8850abcac89" ], "author": { "name": "Karthikeyan Ramasubramanian", "email": "kramasub@codeaurora.org", "time": "Thu Jun 09 11:13:19 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:16 2011 -0700" }, "message": "msm: ipc: Add support for subsystem restart in MSM_IPC Router\n\nWhen a remote processor restarts, the transport corresponding to that\nnode notifies the MSM_IPC Router of that event. MSM_IPC Router cleans\nup the data structures corresponding to that transport and notifies\nthe local clients/servers of removal of all the concerned remote\nservers/clients respectively. When the remote node comes up and\nbroadcasts the server information, local clients will be notified of\nthe arrival of the server so that they can continue communication with\nthe server.\n\nSigned-off-by: Karthikeyan Ramasubramanian \u003ckramasub@codeaurora.org\u003e\n" }, { "commit": "7ff0cf49995d22fddaa90cea95dac8850abcac89", "tree": "5ebc5e1efa7a5c332d10e4a6384758dded7d1ebd", "parents": [ "d42d1206083796119de7d0ea1cc06b14f7f42884" ], "author": { "name": "Azam Sadiq Pasha Kapatrala Syed", "email": "akapatra@codeaurora.org", "time": "Fri Jul 15 15:56:40 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:16 2011 -0700" }, "message": "msm: camera: YV12 video support\n\nSupport for color format YV12.\n\nSigned-off-by: Azam Sadiq Pasha Kapatrala Syed \u003cakapatra@codeaurora.org\u003e\n" }, { "commit": "d42d1206083796119de7d0ea1cc06b14f7f42884", "tree": "075434e2245447bf353ba42b056b49da5f6ef388", "parents": [ "a416c4953aede201b820104aa795f44286fba621" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Wed Jul 20 14:49:57 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:15 2011 -0700" }, "message": "msm: charm: Don\u0027t complete charm_boot on power up\n\nThe first time the target boots up, complete(charm_boot) is\ncalled. Subsystem restart assumes that complete(charm_boot)\nhas never been called before the first time. This can result\nin the charm code getting into a bad state. Fix this by not\ncalling complete on bootup.\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "a416c4953aede201b820104aa795f44286fba621", "tree": "aec84b9d8a1587c392c47ffdbe833eeaf95d7f67", "parents": [ "bc9034da68c8f6c2d15bb219f0dded8d827208ea" ], "author": { "name": "Trilok Soni", "email": "tsoni@codeaurora.org", "time": "Fri Jul 22 20:20:23 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:14 2011 -0700" }, "message": "msm: board-msm7x27a: Move misc initialization to init_machine\n\nMove msm7x2x_misc_init() to init_machine stage because\nacpuclock initialization should not happen before timer\ndriver initializing the lpj.\n\nCRs-Fixed: 295455\nSigned-off-by: Trilok Soni \u003ctsoni@codeaurora.org\u003e\n" }, { "commit": "bc9034da68c8f6c2d15bb219f0dded8d827208ea", "tree": "096b1651ba533dcee8959bdf3c0c2c1923151959", "parents": [ "cc65b5bf5aacc3498764f70f9b545817d1a9e4f5" ], "author": { "name": "Helen Zeng", "email": "xiaoyunz@codeaurora.org", "time": "Fri Jul 08 18:18:25 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:14 2011 -0700" }, "message": "ASoc: msm: Add mixer command to set tty mode\n\nAdd mixer command for setting tty mode in voice platform\ndriver.\n\nSigned-off-by: Helen Zeng \u003cxiaoyunz@codeaurora.org\u003e\n" }, { "commit": "cc65b5bf5aacc3498764f70f9b545817d1a9e4f5", "tree": "0f16f0f2668bc76d719db8a9defd2de2bbbfbd32", "parents": [ "4eb0293d54b082e0385937f1f5b3df5ab08bd24e" ], "author": { "name": "Helen Zeng", "email": "xiaoyunz@codeaurora.org", "time": "Wed Jul 06 19:14:48 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:13 2011 -0700" }, "message": "ASoc: msm: qdsp6: Add APIs for setting and getting tty mode\n\nAdd setting and getting tty mode APIs in voice native driver.\n\nSigned-off-by: Helen Zeng \u003cxiaoyunz@codeaurora.org\u003e\n" }, { "commit": "4eb0293d54b082e0385937f1f5b3df5ab08bd24e", "tree": "0ed6063a013bffd262a16aa2fd80b8cde71acca4", "parents": [ "9f4b429eb3c41a15fcba2a01074f9f6ef4541a33" ], "author": { "name": "Marek Szyprowski", "email": "m.szyprowski@samsung.com", "time": "Fri Mar 11 06:07:27 2011 -0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:12 2011 -0700" }, "message": "[media] v4l2: vb2: one more fix for REQBUFS()\n\nReturn immediately if the target number of buffers is the same as\nthe current one and memory access type doesn\u0027t change.\n\nSigned-off-by: Marek Szyprowski \u003cm.szyprowski@samsung.com\u003e\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\n" }, { "commit": "9f4b429eb3c41a15fcba2a01074f9f6ef4541a33", "tree": "e9356390f604164bdc55eb568ed177d142b1d605", "parents": [ "4fa2ee4cb9484c59336476c52f21cc3b97fd8fd2" ], "author": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Sat Jul 16 22:11:09 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:12 2011 -0700" }, "message": "ASoC: msm: Change channel mode mixer control to enumeration\n\nChange existing mixer control to enumeration type so range\nis fixed and input value is more readable.\n\nSigned-off-by: Patrick Lai \u003cplai@codeaurora.org\u003e\n" }, { "commit": "4fa2ee4cb9484c59336476c52f21cc3b97fd8fd2", "tree": "f88d54e2522ce6b5d1892191a7d15ea21a7c7335", "parents": [ "c49b85db0baedf56bf784462f9a44038253fc44a" ], "author": { "name": "Jay Wang", "email": "jaywang@codeaurora.org", "time": "Mon Jul 18 00:21:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:11 2011 -0700" }, "message": "ASoC: qdsp6: Sets the proper sampling rate for Fluence topology\n\nThe sampling rate of Fluence topology is either 16K or 8K. Therefore,\nwe need to reduce the ADM sampling rate to 16K during recording with\nFluence topology\n\nSigned-off-by: Jay Wang \u003cjaywang@codeaurora.org\u003e\n" }, { "commit": "c49b85db0baedf56bf784462f9a44038253fc44a", "tree": "74ec11f46c618d5f661fea2d34115426e570db3d", "parents": [ "6d6ff5e495a12895b5b4a37eb3049fda560c693a" ], "author": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Fri Jul 15 18:55:34 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:11 2011 -0700" }, "message": "msm: audio: qdsp6v2: Support for RX \u0026 TX ADM topology\n\nThis adds support to store separate RX \u0026 TX topology for\nthe audio device manager (ADM).\n\nSigned-off-by: Ben Romberger \u003cbromberg@codeaurora.org\u003e\n" }, { "commit": "6d6ff5e495a12895b5b4a37eb3049fda560c693a", "tree": "b5cd07de965ec13e579dc70d1d2791e8ecaabe26", "parents": [ "f74d2edd791b3fddaf147c5e358a8f41463dc1f9" ], "author": { "name": "Mansoor Aftab", "email": "maftab@codeaurora.org", "time": "Wed Jul 20 17:25:36 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:10 2011 -0700" }, "message": "msm: camera: Correct mount angle, sensor type values\n\nCorrect the sensor type value for the IMX074 sensor.\nSet the mount angle value for this sensor on 8960,\nalso made sure that the values obtained for angle,type\nfrom probing are recorded in the structure which used\nto retrieve this information during device query.\n\nCRs-fixed: 296576\nSigned-off-by: Mansoor Aftab \u003cmaftab@codeaurora.org\u003e\n" }, { "commit": "f74d2edd791b3fddaf147c5e358a8f41463dc1f9", "tree": "a884366ec0e69231025bfe72e4f338d851c93cc8", "parents": [ "61fe47257aa9fa598163dda4a3938090bf7d95c6" ], "author": { "name": "Manoj Rao", "email": "manojraj@codeaurora.org", "time": "Mon Jul 18 14:25:38 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:09 2011 -0700" }, "message": "msm: display: HDMI: ISR not triggered when HPD occurs during power_off\n\nDuring power off we disable 5v, power down core, by turning off the\nTX channels one by one. When a HPD is triggered the driver has a\nsoftware debouncing timer during which interrupts are disabled to\nbe able to read stable HPD status from the register. When HPD is\ndetected while the core is being turned off/powered down the driver\u0027s\nsoftware disables the interrupt and this was making the core to go\ninto off state. So the fix was to keep the interrupt bit enabled through\nthe register even during the debounce timeout (this doesn\u0027t trigger\nunnecessary interrupts due to appropriate clearing and masking of HPD\ninterrupt bits).\n\nSigned-off-by: Manoj Rao \u003cmanojraj@codeaurora.org\u003e\n" }, { "commit": "61fe47257aa9fa598163dda4a3938090bf7d95c6", "tree": "8fd33d2589be9c5be3f2da6975b75102514d3654", "parents": [ "b4f562ae36c45a1f0df24f7606e2eeb34f9a9aa3" ], "author": { "name": "Larry Bassel", "email": "lbassel@codeaurora.org", "time": "Tue Jul 12 14:09:27 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:09 2011 -0700" }, "message": "msm: arch_add_memory should only perform logical memory hotplug\n\nThe function arch_add_memory() should only perform logical\nmemory hotplug, but it was also improperly performing\nphysical memory hotplug. Even worse, it was adding pages\nto the free list before the memory bank they were in\nwas powered on.\n\nSigned-off-by: Larry Bassel \u003clbassel@codeaurora.org\u003e\n" }, { "commit": "b4f562ae36c45a1f0df24f7606e2eeb34f9a9aa3", "tree": "1577c13c1bca79962b754d12f16b216dbf5773b7", "parents": [ "d828aeac5fdcd9a8b608a2379a8f54a195fb30c9" ], "author": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Wed Jul 13 19:57:54 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:08 2011 -0700" }, "message": "msm: audio: qdsp6v2: Support for out-of-band calibration\n\nTo support sending of calibration in physical shared memory\nthe number of voice volume steps is only sent in the first\nvoice volume calibration block. This means that all products\nthat do not support out-of-band calibration have to pull\nthe number of voice volume steps from the first buffer and\nplace it into the rest of the buffers.\n\nSigned-off-by: Ben Romberger \u003cbromberg@codeaurora.org\u003e\n" }, { "commit": "d828aeac5fdcd9a8b608a2379a8f54a195fb30c9", "tree": "ecb792dab212eab3f14712cba5301b33d9c3de62", "parents": [ "86ea12c1803145447a98a205456adb4ada65900c" ], "author": { "name": "Santosh Mardi", "email": "gsantosh@codeaurora.org", "time": "Tue Jul 19 18:09:49 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:07 2011 -0700" }, "message": "msm: audio: qdsp5v2: Handle the VOICE_START event\n\nHandle VOICE START event when voice state is in voice change\nConsider the following case\nB calls A (A accept the call), voice state in voice acquire\nC calls A (A accept and B in hold) in this scenario following series\nOf events issue to voice driver\nVOICE_END (this event issues a device change command to modem, in turn\nModem changes the voice state from voice acquire to voice change)\n\nVOICE_START (this event is not changing the voice state from voice change\nTo voice acquire as a result mismatch in the voice state maintained by\nVoice proxy driver)\n\nThis patch change the voice state from voice change to voice acquire\nWhen VOICE_START event received and voice state is in voice change\n\nCRs-Fixed: 295375\nSigned-off-by: Santosh Mardi \u003cgsantosh@codeaurora.org\u003e\n" }, { "commit": "86ea12c1803145447a98a205456adb4ada65900c", "tree": "b69397e80e7317a12d571e66e5fdedbeec0b40d0", "parents": [ "229c6a5dc09fa4981088ffe4929f1bcb3ce70e37" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Mon Jul 18 14:10:17 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:07 2011 -0700" }, "message": "msm: clock-local: Remove rcg_clk_set_max_rate()\n\nIf this function doesn\u0027t exist the generic clock layer returns\n-ENOSYS which should be sufficient enough to signal that it isn\u0027t\nsupported.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "229c6a5dc09fa4981088ffe4929f1bcb3ce70e37", "tree": "01f2240cc09183b6a562253b2406e029db12fb24", "parents": [ "a21d6bc64b41a8eaa61a7822a255c8910bf113f4" ], "author": { "name": "Bradley Rubin", "email": "brubin@codeaurora.org", "time": "Tue Jul 12 16:18:48 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:06 2011 -0700" }, "message": "ASoC: WCD9310: Add Active Noise Cancellation support\n\nANC is a feature which reduces noise on the near-end\nby pushing anti-noise onto the audio stream heard\nby the user. ANC mixes the anti-noise signal\ninside of the WCD9310 codec.\n\nSigned-off-by: Brad Rubin \u003cbrubin@codeaurora.org\u003e\n" } ], "next": "a21d6bc64b41a8eaa61a7822a255c8910bf113f4" }