)]}' { "log": [ { "commit": "29dd59755a849cc6475faa6a75f3b804e23a6fc2", "tree": "007f73aed935c22438e69cb2d2438b93f249d955", "parents": [ "f2694b7e3bad75436b47b6840de352f7b7f53feb" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Feb 06 02:57:50 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Feb 06 02:57:50 2008 +0100" }, "message": "ide: remove ide_setup_ports()\n\nide-cris.c:\n* Add cris_setup_ports() helper and use it instead of ide_setup_ports()\n (fixes random value being set in -\u003eio_ports[IDE_IRQ_OFFSET]).\n\nbuddha.c:\n* Add buddha_setup_ports() helper and use it instead of ide_setup_ports().\n\nfalconide.c:\n* Add falconide_setup_ports() helper and use it instead of ide_setup_ports(),\n also fix return value of falconide_init() while at it.\n\ngayle.c:\n* Add gayle_setup_ports() helper and use it instead of ide_setup_ports().\n\nmacide.c:\n* Add macide_setup_ports() helper and use it instead of ide_setup_ports()\n (fixes incorrect value being set in -\u003eio_ports[IDE_IRQ_OFFSET]).\n\nq40ide.c:\n* Fix q40_ide_setup_ports() comments.\n\nide.c:\n* Remove no longer needed ide_setup_ports().\n\nCc: Mikael Starvik \u003cstarvik@axis.com\u003e\nCc: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b187dfeed3be2fc879e904ed0b01d490d8866760", "tree": "3accf67a33f31a74e35e83a3c8bec52b79e1ebfc", "parents": [ "c78d717210619c4312f791fb1da4dc1985630785" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:44 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:44 2008 +0100" }, "message": "ide-cris: use ide_execute_command()\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c413b9b94d9a8e7548cc4b2e04b7df0439ce76fd", "tree": "5d23110a0d1f87ad0c88fb1746194e532808eaab", "parents": [ "1ebf74936b1fccb5b65940f99ccddd74ec4d1fef" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:31 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:31 2008 +0100" }, "message": "ide: add struct ide_port_info instances to legacy host drivers\n\n* Remove \u0027struct pci_dev *dev\u0027 argument from ide_hwif_setup_dma().\n\n* Un-static ide_hwif_setup_dma() and add CONFIG_BLK_DEV_IDEDMA_PCI\u003dn version.\n\n* Add \u0027const struct ide_port_info *d\u0027 argument to ide_device_add[_all]().\n\n* Factor out generic ports init from ide_pci_setup_ports() to ide_init_port(),\n move it to ide-probe.c and call it in in ide_device_add_all() instead of\n ide_pci_setup_ports().\n\n* Move -\u003emate setup to ide_device_add_all() from ide_port_init().\n\n* Add IDE_HFLAG_NO_AUTOTUNE host flag for host drivers that don\u0027t enable\n -\u003eautotune currently.\n\n* Setup hwif-\u003echipset in ide_init_port() but iff pi-\u003echipset is set\n (to not override setup done by ide_hwif_configure()).\n\n* Add ETRAX host handling to ide_device_add_all().\n\n* cmd640.c: set IDE_HFLAG_ABUSE_* also for CONFIG_BLK_DEV_CMD640_ENHANCED\u003dn.\n\n* pmac.c: make pmac_ide_setup_dma() return an error value and move DMA masks\n setup to pmac_ide_setup_device().\n\n* Add \u0027struct ide_port_info\u0027 instances to legacy host drivers, pass them to\n ide_device_add() calls and then remove open-coded ports initialization.\n\nReviewed-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "58f189fccc72bb8a91de1854e519b47d64fbdbaa", "tree": "977aa91b6dd93ab07b22f60f97e8c91533f9125e", "parents": [ "fadd11c71b5a100fb7560b84a6272b8883082726" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:33 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:33 2008 +0100" }, "message": "ide: delete filenames/versions from comments\n\nDelete filenames/versions from comments.\n\nI\u0027m leaving decisions about adding DRV_VERSION defines and MODULE_VERSION()-s\nto maintainers of the respective drivers.\n\nWhile at it:\n\n* Remove unused VERSION define from ide.c.\n\n* Remove unused/stale DRV_VERSION define from au1xxx-ide.c.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ade2daf9c6e57845fe83a24e0a9fa1c03c6e91b1", "tree": "68070062d6306442caee50630c4213c911eb9064", "parents": [ "8ac4ce742c66100931b6f2d7a36b0df08bc721fe" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:07 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:07 2008 +0100" }, "message": "ide: make remaining built-in only IDE host drivers modular (take 2)\n\n* Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c\n file for probing PCI host drivers registered with IDE core (special case\n for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER\u003dy) and then take care of\n the ordering in which all IDE host drivers are probed when IDE is built-in\n during link time.\n\n* Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch\n specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris\n arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific).\n\n* Move probing of ide-cris (cris arch specific) host driver before cmd640\n (x86 arch specific).\n\n* Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends\n on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300\n (h8300 arch specific).\n\n* Add \"probe_vlb\" kernel parameter to cmd640 host driver and update\n Documentation/ide.txt accordingly.\n\n* Make IDE_ARM config option visible so it can also be disabled if needed.\n\n* Remove bogus comment from ide.c while at it.\n\nv2:\n* Fix two issues spotted by Sergei:\n - replace ENOMEM error value by ENOENT in ide-h8300 host driver\n - fix MODULE_PARM_DESC() in cmd640 host driver\n\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Mikael Starvik \u003cstarvik@axis.com\u003e\nCc: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nCc: Roman Zippel \u003czippel@linux-m68k.org\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8ac4ce742c66100931b6f2d7a36b0df08bc721fe", "tree": "bc44edb8d6ec9057d24aa4c986729e1ca9f3f860", "parents": [ "ac87e41116c229fc1efaac0d17fdbfb2185e4629" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:06 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:06 2008 +0100" }, "message": "ide: fix host drivers depending on ide_generic to probe for interfaces (take 2)\n\n* Add mpc8xx_ide_probe() to mpc8xx.c and call it from probe_for_hwifs().\n\n* Convert ide_arm, ide-cris, ide-h8300, ide-pnp, buddha, falconide, gayle,\n macide, q40ide, cmd640 and mpc8xx host drivers to use ide_device_add().\n\n This removes dependency on ide_generic for these drivers so update\n ide/Kconfig accordingly.\n\nv2:\n* ide_arm build fix (s/ide_device_idx/ide_device_add/)\n (Thanks to Christoph Lameter \u003cclameter@sgi.com\u003e for reporting the problem).\n\nCc: Mikael Starvik \u003cstarvik@axis.com\u003e\nCc: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nCc: Roman Zippel \u003czippel@linux-m68k.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "cbb010c180294a5242a7681555c28737d9dd26ab", "tree": "073883d1dc672bb38021563ca0d9cd762cd5abf2", "parents": [ "57c802e84f9c759c3d1794a9dbe81bc10444df62" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:06 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:06 2008 +0100" }, "message": "ide: drop \u0027initializing\u0027 argument from ide_register_hw()\n\n* Rename init_hwif_data() to ide_init_port_data() and export it.\n\n* For all users of ide_register_hw() with \u0027initializing\u0027 argument set\n hwif-\u003epresent and hwif-\u003ehold are always zero so convert these host\n drivers to use ide_find_port()+ide_init_port_data()+ide_init_port_hw()\n instead (also no need for init_hwif_default() call since the setup\n done by it gets over-ridden by ide_init_port_hw() call).\n\n* Drop \u0027initializing\u0027 argument from ide_register_hw().\n\nCc: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nCc: Roman Zippel \u003czippel@linux-m68k.org\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "15ce926ada545cb078711bd9a18c083c93fa01d7", "tree": "9496cda87cae6ef3390c5f350741ad75418dfe8d", "parents": [ "f37aaf9edeba3f4ae10d22aefc09c06af9ea39b6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "message": "ide: merge -\u003edma_host_{on,off} methods into -\u003edma_host_set method\n\nMerge -\u003edma_host_{on,off} methods into -\u003edma_host_set method\nwhich takes \u0027int on\u0027 argument.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "07a085ebd35ba0d4e2d88b9044563661dbca2471", "tree": "9e401b547877850ba56117a37be3a270beb25db3", "parents": [ "4a546e046d562bcd389149591fa5a534c8f832ca" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:01 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:01 2008 +0100" }, "message": "ide-cris: fix DMA methods\n\n* Rename cris_dma_{on,off}() to cris_dma_host_{on,off}().\n\n* Remove no longer needed -\u003edma_off_quietly\n (IDE core has the needed code now).\n\n* Make cris_dma_host_on() void.\n\nI left fixing ide-cris after \"kill dma_on/dma_off_quietly() methods\"\npatch because:\n\n* Currently this driver is broken: cris_dma_on() (returns \u0027int\u0027)\n is assigned to hwif-\u003edma_host_on (returns \u0027void\u0027) so the driver\n won\u0027t build.\n\n* -\u003eide_dma_on method was missing so the driver OOPS-es on attempt\n to enable DMA.\n\n* drive-\u003eusing_dma was never set/cleared so DMA wouldn\u0027t be used anyway.\n\nUnfortunately it seems that ide-cris stays broken even after this patch:\n\n* V10: \u003casm/arch-v10/ide.h\u003e needs fixing\n - ide_init_default_hwifs() should be removed\n (IDE core no longer uses it)\n - same for ide_init_hwif_ports() and ide_default_{irq,io_base}()\n (they shouldn\u0027t be needed for ide-cris host driver)\n\n* V32: I\u0027m unable to find a place which defines ETRAX_ARCH_V32\n\nbut I\u0027m leaving fixing this to CRIS gurus. :)\n\nCc: Mikael Starvik \u003cstarvik@axis.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4db90a145292327b95b03f6dcd3352327235cc36", "tree": "c48ba5fc31e27d6fbdb8883151bdf237e7eb1920", "parents": [ "428c6440ef933a3d9df5adfeb2cbb3ea7ebb6a68" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:18 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:18 2008 +0100" }, "message": "ide: add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag\n\n* Add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag and use it to decide\n what to do with transfer modes \u003c XFER_PIO_0 in ide_set_xfer_rate().\n\n* Set IDE_HFLAG_ABUSE_SET_DMA_MODE in host drivers that need it\n (aec62xx, amd74xx, cs5520, cs5535, hpt34x, hpt366, pdc202xx_old,\n serverworks, tc86c001 and via82cxxx) and cleanup -\u003eset_dma_mode\n methods in host drivers that don\u0027t (IDE core code guarantees that\n -\u003eset_dma_mode will be called only for modes which are present\n in SWDMA/MWDMA/UDMA masks).\n\nWhile at it:\n\n* Add IDE_HFLAGS_HPT34X/HPT3XX/PDC202XX/SVWKS define in\n hpt34x/hpt366/pdc202xx_old/serverworks host driver.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "e816056210941e9886e447e331b7fdbe133cb5f0", "tree": "b08ea004216abd50570f79e4003ee8061ce51118", "parents": [ "c03a9278ad96e1e7d144f5f626c6794f050c0ae7" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Nov 27 21:35:55 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Nov 27 21:35:55 2007 +0100" }, "message": "ide-cris: don\u0027t override ide_register_hw() result\n\n* Don\u0027t override ide_register_hw() result and check if there is a hwif\n available to use.\n\n* MAX_HWIFS is user configurable nowadays so replace it by hard-coded value.\n\n* Remove the comment about ide_hwifs[].\n\nAcked-by: Mikael Starvik \u003cstarvik@axis.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "34c69b601b2ec8fc8ff6657a547ce3865d58e220", "tree": "eddcf5c10d212612b0f381f9a2d7e9606c60eadc", "parents": [ "c1f50cbb06363b36700c0a679a5bd3ddef0a97b6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Nov 13 22:09:15 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Nov 13 22:09:15 2007 +0100" }, "message": "ide: don\u0027t BUG() on unsupported transfer modes\n\nFix ide-cris, cs5530, sc1200 and sis5513 host drivers to just return instead\nof OOPS-ing for unsupported modes in -\u003eset_dma_mode methods.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "45711f1af6eff1a6d010703b4862e0d2b9afd056", "tree": "3d0048f46e3df9d217d56127462ebe680348bd5a", "parents": [ "78c2f0b8c285c5305b3e67b0595200541e15eb43" ], "author": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Mon Oct 22 21:19:53 2007 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Mon Oct 22 21:19:53 2007 +0200" }, "message": "[SG] Update drivers to use sg helpers\n\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "fd9bb53942a7ca3398a63f2c238afd8fbed3ec0e", "tree": "eab9592f5bcbee89e0fdf9661e40a92d629d0a32", "parents": [ "438c470261036db25bfae15235ba99812e3dc763" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:31 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:31 2007 +0200" }, "message": "ide: add -\u003efixup method to ide_hwif_t\n\n* Add -\u003efixup method to ide_hwif_t.\n\n* Set hwif-\u003efixup in ide_pci_setup_ports() to d-\u003efixup.\n\n* Use hwif-\u003efixup in probe_hwif().\n\n* Use probe_hwif_init() instead of probe_hwif_init_with_fixup() in\n ide_setup_pci_device().\n\n* Add \u0027fixup\u0027 argument to ide_register_hw() and use it to set hwif-\u003efixup,\n update all ide_register_hw() users accordingly.\n\n* Convert ide-cs/delkin_cb host drivers to use ide_register_hw().\n\n* Restore hwif-\u003efixup in ide_hwif_restore().\n\n* Remove ide_register_hw_with_fixup(), probe_hwif_init_with_fixup()\n and \u0027fixup\u0027 argument from probe_hwif().\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "33c1002ed912ac9dacedd5d5b166da3b72d18460", "tree": "c129987c6935542a8bd95924873ac6bf0e1e756c", "parents": [ "1c3dd326ad790934fd88ec086e75a9d61ddaef8a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 19 00:30:06 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 19 00:30:06 2007 +0200" }, "message": "ide: add IDE_HFLAG_NO_ATAPI_DMA host flag\n\nAdd IDE_HFLAG_NO_ATAPI_DMA host flag and set it in host drivers which\ndon\u0027t support ATAPI DMA. Then remove no longer needed hwif-\u003eatapi_dma.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9ff6f72f432364991d68e99cae72cb141c166e70", "tree": "e37e5dc6d1b2387f7cbc2909d5cb534d4a395a79", "parents": [ "1b5169405e50b98b2bd1e4f86c7706ea24a59193" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:58 2007 +0200" }, "message": "ide: remove hwif-\u003eautodma and drive-\u003eautodma\n\n* hpt34x.c: disable DMA masks for HPT345\n (hwif-\u003eautodma is zero so DMA won\u0027t be enabled anyway).\n\n* trm290.c: disable IDE_HFLAG_TRUST_BIOS_FOR_DMA flag\n (hwif-\u003eautodma is zero so DMA won\u0027t be enabled anyway).\n\n* Check noautodma global variable instead of drive-\u003eautodma in ide_tune_dma().\n\n This fixes handling of \"ide\u003dnodma\" kernel parameter for icside, ide-cris,\n au1xxx-ide, pmac, it821x, jmicron, sgiioc4 and siimage host drivers.\n\n* Remove hwif-\u003eautodma (it was not checked by IDE core code anyway) and\n drive-\u003eautodma (was set by all host drivers - except HPT345/TRM290 special\n cases - unless \"ide\u003dnodma\" was used).\n\nWhile at it:\n- remove needless printk() from icside.c\n- remove stale FIXME/comment from ide-probe.c\n- don\u0027t force DMA off if PCI bus-mastering had to be enabled in setup-pci.c\n (this setting was always later over-ridden by host drivers anyway)\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "0ae2e178652753ae1797d407755a3505f7c1d2a7", "tree": "fa725edcfb4b9752ebf2aa49a3e42e158537d4ed", "parents": [ "b8b739d3361c16773a30fe5c0360336bbc19f435" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:55 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:55 2007 +0200" }, "message": "ide: remove -\u003eide_dma_check (take 2)\n\n* Add IDE_HFLAG_TRUST_BIOS_FOR_DMA host flag for host drivers that depend\n on BIOS for programming device/controller for DMA. Set it in cy82c693,\n generic, ns87415, opti621 and trm290 host drivers.\n\n* Add IDE_HFLAG_VDMA host flag for host drivers using VDMA. Set it in cs5520\n host driver.\n\n* Teach ide_tune_dma() about IDE_HFLAG_TRUST_BIOS_FOR_DMA flag.\n\n* Add generic ide_dma_check() helper and remove all open coded -\u003eide_dma_check\n implementations. Fix all places checking for presence of -\u003eide_dma_check\n hook to check for -\u003eide_dma_on instead.\n\n* Remove no longer needed code from config_drive_for_dma().\n\n* Make ide_tune_dma() static.\n\nv2:\n* Fix config_drive_for_dma() return values.\n\n* Fix ide-dma.c build for CONFIG_BLK_DEV_IDEDMA_PCI\u003dn by adding\n dummy config_drive_for_dma() inline.\n\n* Fix IDE_HFLAG_TRUST_BIOS_FOR_DMA handling in ide_dma_check().\n\n* Fix init_hwif_it8213() comment.\n\nThere should be no functionality changes caused by this patch.\n\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ef539b57dfe731e2d4fb6f02158e979114ab5b69", "tree": "2df728235cc81a3efdc392fdc2077dd1f888248c", "parents": [ "d6ae3adb2efb078bcbcf727030771408dafd8ed4" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:55 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:55 2007 +0200" }, "message": "ide-cris: add PIO autotune fallback to -\u003eide_dma_check\n\nSince ide-cris allows separate PIO and DMA timings, and ide-cris always sets\n-\u003eautotune this change shouldn\u0027t have any other effect than bringing ide-cris\ndriver in-line with other host drivers wrt -\u003eide_dma_check implementation.\n\nCc: Mikael Starvik \u003cstarvik@axis.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ffbcb017371d82abff6de9a714b6df30d56ee896", "tree": "67b2f69e6bf72dd415b06d7eddb7036ec104057e", "parents": [ "a7b888b2f1422009f286c9e639db9bd726e9673a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:53 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:53 2007 +0200" }, "message": "ide-cris: always tune PIO\n\nAcked-by: Mikael Starvik \u003cstarvik@axis.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "55c16a70041ba55e235c5944dccb9c1de0dd3ca6", "tree": "e48c1d9943fc52329cae1656ca59d24751dd9b98", "parents": [ "ba2da2f8d61a9d2e24754c6311a4ab6a5e70060a" ], "author": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Wed Jul 25 08:13:56 2007 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Tue Oct 16 11:21:00 2007 +0200" }, "message": "IDE: sg chaining support\n\nAcked-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "88b2b32babd46cd54d2de4d17eb869aea3383e11", "tree": "d446864f7c3431f8c428eecacd11caf7b794f018", "parents": [ "6e249395eace037ef139a1c8996b31e3797e412a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:51 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:51 2007 +0200" }, "message": "ide: move ide_config_drive_speed() calls to upper layers (take 2)\n\n* Convert {ide_hwif_t,ide_pci_device_t}-\u003ehost_flag to be u16.\n\n* Add IDE_HFLAG_POST_SET_MODE host flag to indicate the need to program \n the host for the transfer mode after programming the device. Set it\n in au1xxx-ide, amd74xx, cs5530, cs5535, pdc202xx_new, sc1200, pmac\n and via82cxxx host drivers.\n\n* Add IDE_HFLAG_NO_SET_MODE host flag to indicate the need to completely\n skip programming of host/device for the transfer mode (\"smart\" hosts).\n Set it in it821x host driver and check it in ide_tune_dma().\n\n* Add ide_set_pio_mode()/ide_set_dma_mode() helpers and convert all\n direct -\u003eset_pio_mode/-\u003espeedproc users to use these helpers.\n\n* Move ide_config_drive_speed() calls from -\u003eset_pio_mode/-\u003espeedproc\n methods to callers.\n\n* Rename -\u003espeedproc method to -\u003eset_dma_mode, make it void and update\n all implementations accordingly.\n\n* Update ide_set_xfer_rate() comments.\n\n* Unexport ide_config_drive_speed().\n\nv2:\n* Fix issues noticed by Sergei:\n - export ide_set_dma_mode() instead of moving -\u003eset_pio_mode abuse wrt\n to setting DMA modes from sc1200_set_pio_mode() to do_special()\n - check IDE_HFLAG_NO_SET_MODE in ide_tune_dma()\n - check for (hwif-\u003eset_pio_mode) \u003d\u003d NULL in ide_set_pio_mode()\n - check for (hwif-\u003eset_dma_mode) \u003d\u003d NULL in ide_set_dma_mode()\n - return -1 from ide_set_{pio,dma}_mode() if -\u003eset_{pio,dma}_mode \u003d\u003d NULL\n - don\u0027t set -\u003eset_{pio,dma}_mode on it821x in \"smart\" mode\n - fix build problem in pmac.c\n - minor fixes in au1xxx-ide.c/cs5530.c/siimage.c\n - improve patch description\n\nChanges in behavior caused by this patch:\n- HDIO_SET_PIO_MODE ioctl would now return -ENOSYS for attempts to change\n PIO mode if it821x controller is in \"smart\" mode\n- removal of two debugging printk-s (from cs5530.c and sc1200.c)\n- transfer modes 0x00-0x07 passed from user space may be programmed twice on\n the device (not really an issue since 0x00 is not supported correctly by\n any host driver ATM, 0x01 is not supported at all and 0x02-0x07 are invalid)\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8f4dd2e42637fd61a6366d2cace69091926eaa15", "tree": "38dc8e475afc27c575ff7f3701e57d5c9e3a9be9", "parents": [ "0d3be723cb6432e384267d0fe83ee0bae5e17846" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:54:02 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:54:02 2007 +0200" }, "message": "ide: use only -\u003eset_pio_mode method for programming PIO modes (take 2)\n\nUse -\u003eset_pio_mode method to program PIO modes in ide_set_xfer_rate()\n(the only place which used -\u003espeedproc to program PIO modes) and remove\nhandling of PIO modes from all -\u003espeedproc implementations.\n\nv2:\n* Fix pmac_ide_tune_chipset() comment.\n\nThere should be no functionality changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "26bcb879c03254545a19c6700fe5bcef6f21e7b1", "tree": "dc35f1a7d7860fe0de268ff92189ff0884b689d3", "parents": [ "842c19ad6fc0dbd9ac9d2f8527466201802934cf" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:54:00 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:54:00 2007 +0200" }, "message": "ide: add ide_set{_max}_pio() (take 4)\n\n* Add IDE_HFLAG_ABUSE_{PREFETCH,FAST_DEVSEL,DMA_MODES} flags\n and set them in ht6560, cmd640, cmd64x and sc1200 host drivers.\n\n* Add set_pio_mode_abuse() for checking if host driver has a non-standard\n -\u003etuneproc() implementation and use it in do_special().\n\n* Add ide_set_pio() for setting PIO mode (it uses hwif-\u003epio_mask to find\n the maximum PIO mode supported by the host), also add ide_set_max_pio()\n wrapper for ide_set_pio() to use for auto-tuning. Convert users of\n -\u003etuneproc to use ide_set{_max}_pio() where possible. This leaves only\n do_special(), set_using_pio(), ide_hwif_restore() and ide_set_pio() as\n a direct users of -\u003etuneproc.\n\n* Remove no longer needed ide_get_best_pio_mode() calls and printk-s\n reporting PIO mode selected from -\u003etuneproc implementations.\n\n* Rename -\u003etuneproc hook to -\u003eset_pio_mode and make \u0027pio\u0027 argument const.\n\n* Remove stale comment from ide_config_drive_speed().\n\nv2:\n* Fix \"ata_\" prefix (Noticed by Jeff).\n\nv3:\n* Minor cleanups/fixups per Sergei\u0027s suggestions.\n\nv4:\n* Fix compile problem in drivers/ide/pci/cmd640.c\n (Noticed by Andrew Morton).\n\n* Improve some -\u003eset_pio_mode comments.\n\nReviewed-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f212ff28f08e4ddcef9f25b13463c45cc4204a0c", "tree": "e8fe63044c2ebec404689cbd55d75497aa77da0a", "parents": [ "3160d5416f39da9d9221fec7cb9d64399b706bbc" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:53:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:53:59 2007 +0200" }, "message": "ide: move ide_rate_filter() calls to the upper layer (take 2)\n\n* Move ide_rate_filter() calls from host drivers to IDE core.\n\n* Make ide_rate_filter() static.\n\n* Make \u0027speed\u0027 argument of -\u003espeedproc const.\n\nv2:\n* Fix it8213_tune_chipset() comment.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "a8028fcb485522c0d7de9c5423812de9224b37c9", "tree": "ffc5d22dab4fcb3abbbf83e9a1fefa792425b116", "parents": [ "851dd33bcf23655eede62730c029e4f608f4084f" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:53:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:53:59 2007 +0200" }, "message": "ide: add missing ide_rate_filter() calls to -\u003espeedproc()-s\n\n* Fix icside, cris-ide, au1xxx-ide, amd74xx, via82cxxx and pmac host drivers\n to use ide_rate_filter().\n\n This results in the following modes (from user requests) being clipped down:\n - invalid modes (values 0x46-0xFF) [ for all hosts ]\n - unsupported by a host UDMA modes [ for hosts which support UDMA]\n - all UDMA modes and MWDMA3-4 modes [ for hosts which don\u0027t support UDMA ]\n - invalid modes (values 0x25-0x39) [ for hosts which don\u0027t support UDMA ]\n\n* Host driver specific changes in behavior:\n\n icside:\n - no change\n\n cris-ide\n - clip unsupported UDMA3-6 modes down\n - fix BUG() on trying to set unsupported UDMA3-6 modes\n\n au1xxx-ide/pmac\n - clip unsupported UDMA modes down\n\n amd74xx/via82cxxx\n - clip unsupported UDMA modes down\n - fix random PIO timings being set for unsupported/invalid modes\n - fix unsupported/invalid modes being set on the device\n\n* While at it remove no longer needed checks from pmac.c driver.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8292e8c7e4c2b99f22120f677858487de43c484b", "tree": "e5d46827b4d63a5b6f86e31d177f0a8bb46fd535", "parents": [ "2195dadf853bb32262bd2e5a64f517ae45698c55" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:54 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:54 2007 +0200" }, "message": "ide-cris: fix -\u003eset_pio_mode method to set transfer mode on the device\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "d281e9ad87f79fd01ce1fc2d2f258e2ee765bc5a", "tree": "4b498af97d73599d7f2b4ed350ef03bb7908a377", "parents": [ "4099d14322149c7a467e4997b87be4ba8eb78697" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "message": "ide-cris: handle PIO auto-tuning in tune_cris_ide()\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4099d14322149c7a467e4997b87be4ba8eb78697", "tree": "133a913d7f9c2dacaaaef5cfdf2ae6911dc21f4c", "parents": [ "6a824c92db4d606c324272c4eed366fb71672440" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "message": "ide: add PIO masks\n\n* Add ATA_PIO[0-6] defines to \u003clinux/ata.h\u003e.\n\n* Add -\u003epio_mask field to ide_pci_device_t and ide_hwif_t.\n\n* Add PIO masks to host drivers.\n\n\u003clinux/ata.h\u003e change ACK-ed by Jeff Garzik \u003cjeff@garzik.org\u003e.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c82d72f5c521434c36b9550b3ac6601eb8167687", "tree": "7f9746f66bf0e97c316b23c0f50c615c2dcb8297", "parents": [ "363f7e428dcf9f90d726481029f7b4a0ed6d55ce" ], "author": { "name": "Robert P. J. Day", "email": "rpjday@mindspring.com", "time": "Fri Jul 20 01:11:54 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:54 2007 +0200" }, "message": "IDE: Remove references to dead ETRAX-related variables.\n\nThe two CONFIG variables\n\n CONFIG_ETRAX_IDE_CSE1_16_RESET\n CONFIG_ETRAX_IDE_CSP0_8_RESET\n\nappear to have been dead since way back in 2.5.xx days:\n\nhttp://www.linuxhq.com/kernel/v2.5/75/arch/cris/drivers/Kconfig\n\nSigned-off-by: Robert P. J. Day \u003crpjday@mindspring.com\u003e\nCc: Michael Starvik \u003cstarvik@axis.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "49521f97ccd3c2bf6e71a91cea8fe65d170fa4fb", "tree": "f61c34da6092f2f1a97a78da567afc59ad40850b", "parents": [ "75b1d97535327d0428c6bffd9d5407e65546fd5d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "message": "ide: add short cables support\n\nThis patch allows users to override both host and device side cable detection\nwith \"ideX\u003data66\" kernel parameter. Thanks to this it should be now possible\nto use UDMA \u003e 2 modes on systems (laptops mainly) which use short 40-pin cable\ninstead of 80-pin one.\n\nNext patches add automatic detection of some systems using short cables.\n\nChanges:\n\n* Rename hwif-\u003eudma_four to hwif-\u003ecbl and make it u8.\n\n* Convert all existing users accordingly (use ATA_CBL_* defines while at it). \n\n* Add ATA_CBL_PATA40_SHORT support to ide-iops.c:eighty_ninty_three().\n\n* Use ATA_CBL_PATA40_SHORT for \"ideX\u003data66\" kernel parameter.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nReviewed-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\n" }, { "commit": "bd203b57c7edd6bc457b769cd15fa7239cd2241e", "tree": "9c62fee37780fa38bbd47bbbec00571159ec9093", "parents": [ "5fd216bbb277b645109a889c489e13a7aafbc304" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 16 00:51:43 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 16 00:51:43 2007 +0200" }, "message": "ide: use ide_tune_dma() part #2\n\nUse ide_tune_dma() in ide-cris/it821x/pdc202xx_old/serverworks drivers.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "869c56ee9de1b72cd3f8ab9cdfbd3601e55c61f2", "tree": "0f295ba89c774f9a20b2b089a29f288cd80b8094", "parents": [ "7f8f48af0861c38c28d4abd550102643e0ea9e6a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "message": "ide: add \"initializing\" argument to ide_register_hw()\n\nAdd \"initializing\" argument to ide_register_hw() and use it instead of ide.c\nwide variable of the same name. Update all users of ide_register_hw()\naccordingly.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "2d5eaa6dd744a641e75503232a01f52d0768884c", "tree": "0736bd00ea3bd032d601d0a676c998cb043b877a", "parents": [ "18137207236285989dfc0ee7f929b954199228f3" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:08 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:08 2007 +0200" }, "message": "ide: rework the code for selecting the best DMA transfer mode (v3)\n\nDepends on the \"ide: fix UDMA/MWDMA/SWDMA masks\" patch.\n\n* add ide_hwif_t.udma_filter hook for filtering UDMA mask\n (use it in alim15x3, hpt366, siimage and serverworks drivers)\n* add ide_max_dma_mode() for finding best DMA mode for the device\n (loosely based on some older libata-core.c code)\n* convert ide_dma_speed() users to use ide_max_dma_mode()\n* make ide_rate_filter() take \"ide_drive_t *drive\" as an argument instead\n of \"u8 mode\" and teach it to how to use UDMA mask to do filtering\n* use ide_rate_filter() in hpt366 driver\n* remove no longer needed ide_dma_speed() and *_ratemask()\n* unexport eighty_ninty_three()\n\nv2:\n* rename -\u003efilter_udma_mask to -\u003eudma_filter\n [ Suggested by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nv3:\n* updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space\n originated transfer mode change requests when 100MHz clock is used)\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "55e4dee32916a569112f33a511adab4bd72cc4a2", "tree": "68fc27b015091656aad975fe2701efdc17480d31", "parents": [ "8e60d3762f32c9573a449950717a3de12dfebbe3" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat May 05 22:03:51 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat May 05 22:03:51 2007 +0200" }, "message": "ide-cris: fix -\u003espeedproc and wrong -\u003eswdma_mask\n\n* fix -\u003espeedproc to set the drive speed\n\n* this driver doesn\u0027t support SWDMA so use the correct -\u003eswdma_mask\n\n* BUG() if an unsupported mode is passed to -\u003espeedproc\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "846c11abc7934a523a665a3b702358e6f2998e3e", "tree": "60f090cd6846fee09653dcc8345e56474f0c2ddf", "parents": [ "8693d3e47b5cd95e1a513f90bc5e0467ce885e24" ], "author": { "name": "Alan Cox", "email": "alan@redhat.com", "time": "Sat Mar 03 17:48:54 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 03 17:48:54 2007 +0100" }, "message": "ide: remove a ton of pointless #undef REALLY_SLOW_IO\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ccf352894ceef79d40d015e1deee4c46c3aa42ed", "tree": "e30b2b8a4c30e2ef1719ce9780322e671ebe3c43", "parents": [ "7469aaf6a30f4187ed6de7c0aed5c2dd2d1c2d31" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "message": "ide: make ide_hwif_t.ide_dma_host_on void (v2)\n\n* since ide_hwif_t.ide_dma_host_on is called either when drive-\u003eusing_dma \u003d\u003d 1\n or when return value is discarded make it void, also drop \"ide_\" prefix\n* make __ide_dma_host_on() void and drop \"__\" prefix\n\nv2:\n* while at it rename atiixp_ide_dma_host_on() to atiixp_dma_host_on()\n and sgiioc4_ide_dma_host_on() to sgiioc4_dma_host_on().\n [ Noticed by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "7469aaf6a30f4187ed6de7c0aed5c2dd2d1c2d31", "tree": "079930f23b3d14e4ad29ab972bc6d91fde52e5f0", "parents": [ "3608b5d71a52c053787dbad6af20c25f7e0b75a9" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "message": "ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void (v2)\n\n* since ide_hwif_t.ide_dma_{host_off,off_quietly} always return \u00270\u0027\n make these functions void and while at it drop \"ide_\" prefix\n* fix comment for __ide_dma_off_quietly()\n* make __ide_dma_{host_off,off_quietly,off}() void and drop \"__\" prefix\n\nv2:\n* while at it rename atiixp_ide_dma_host_off() to atiixp_dma_host_off(),\n sgiioc4_ide_dma_{host_off,off_quietly}() to sgiioc4_dma_{host_off,off_quietly}()\n and sl82c105_ide_dma_off_quietly() to sl82c105_dma_off_quietly()\n [ Noticed by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "3608b5d71a52c053787dbad6af20c25f7e0b75a9", "tree": "5bd6ac777d32d8426e65e3c31cc1587674771e8c", "parents": [ "9ef5791e1be91007951477b8ed1530ac1166a8e7" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "message": "ide: add ide_set_dma() helper (v2)\n\n* add ide_set_dma() helper and make ide_hwif_t.ide_dma_check return\n -1 when DMA needs to be disabled (\u003d\u003d need to call -\u003eide_dma_off_quietly)\n 0 when DMA needs to be enabled (\u003d\u003d need to call -\u003eide_dma_on)\n 1 when DMA setting shouldn\u0027t be changed\n* fix IDE code to use ide_set_dma() instead if using -\u003eide_dma_check directly\n\nv2:\n* updated for scc_pata\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "2ad1e558a2305c2b3d5099ee2f4a5929307c20ca", "tree": "79a530648cc26184c3b2e3933c0ebad614329b5b", "parents": [ "0ecdca26e556eae9668ce6de9554757dddb942ef" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "message": "ide: convert ide_hwif_t.mmio into flag (v2)\n\nAll users of -\u003emmio \u003d\u003d 1 are gone so convert -\u003emmio into flag.\n\nNoticed by Alan Cox.\n\nv2:\n* updated for scc_pata\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "7569e8dc2213ecc47024ea5edbadc8736487d926", "tree": "44c47e85b5e87c75972c077da31f198c4f597688", "parents": [ "056a697b7388844a1341e92e277bff8e5bf61ec9" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "message": "ide: add ide_use_fast_pio() helper (v3)\n\n* add ide_use_fast_pio() helper for use by host drivers\n\n* add DMA capability and hwif-\u003eautodma checks to ide_use_dma()\n\n - au1xxx-ide/it8213/it821x drivers didn\u0027t check for (id-\u003ecapability \u0026 1)\n\n [ for the IT8211/2 in SMART mode this check shouldn\u0027t be made but since\n in it821x_fixups() we set DMA bit explicitly:\n\n if(strstr(id-\u003emodel, \"Integrated Technology Express\")) {\n /* In raid mode the ident block is slightly buggy\n We need to set the bits so that the IDE layer knows\n LBA28. LBA48 and DMA ar valid */\n id-\u003ecapability |\u003d 3; /* LBA28, DMA */\n\n we are better off using generic helper if we can ]\n\n - ide-cris driver didn\u0027t set -\u003eautodma\n\n [ before the patch hwif-\u003eautodma was only checked in the chipset specific\n hwif-\u003eide_dma_check implementations, for ide-cris it is cris_dma_check()\n function so there no behavior change here ]\n\nv2:\n* updated patch description (thanks to Alan Cox for the feedback)\n\nv3:\n* updated for scc_pata driver\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "6ab3d5624e172c553004ecc862bfeac16d9d68b7", "tree": "6d98881fe91fd9583c109208d5c27131b93fa248", "parents": [ "e02169b682bc448ccdc819dc8639ed34a23cedd8" ], "author": { "name": "Jörn Engel", "email": "joern@wohnheim.fh-wedel.de", "time": "Fri Jun 30 19:25:36 2006 +0200" }, "committer": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Fri Jun 30 19:25:36 2006 +0200" }, "message": "Remove obsolete #include \u003clinux/config.h\u003e\n\nSigned-off-by: Jörn Engel \u003cjoern@wohnheim.fh-wedel.de\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\n" }, { "commit": "e63b68de5c9bf68cfb4a272469147b19176d76d6", "tree": "b7360d771a16fee23a2309c2b66726d1880e24f5", "parents": [ "51533b615e605d86154ec1b4e585c8ca1b0b15b7" ], "author": { "name": "Mikael Starvik", "email": "mikael.starvik@axis.com", "time": "Wed Jul 27 11:44:51 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Wed Jul 27 16:26:02 2005 -0700" }, "message": "[PATCH] CRIS IDE driver\n\n * Added abstraction layer for subarchs.\n * Added v32 support.\n * Renamed driver.\n\nSigned-off-by: Mikael Starvik \u003cstarvik@axis.com\u003e\nAcked-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d", "parents": [], "author": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n" } ] }