)]}' { "log": [ { "commit": "d30a426dc5fd8801dbd05485788a001de623d487", "tree": "208b400c9d42ffef8a8ee811ef057f88fc28d623", "parents": [ "cb777922c3a15ccbea4c02bed401e030f195aaea" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Mon Feb 11 00:32:12 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Feb 11 00:32:12 2008 +0100" }, "message": "ide: insert BUG_ON() into __ide_set_handler() (take 2)\n\nReplace the check for hwgroup-\u003ehandler and printk(KERN_CRIT, ...) at the start\nof __ide_set_handler() with mere BUG_ON() while removing such from the caller,\nide_execute_command(). Fix up the code formatting, while at it...\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "64a57fe4393bae920d03c253173f59d8a7ec8e25", "tree": "bfbac6fa370401d519a6fd9433a330dd55efe68d", "parents": [ "c47137a99c597330b69057158b26061a360c0e09" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Feb 06 02:57:51 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Feb 06 02:57:51 2008 +0100" }, "message": "ide: add ide_read_error() inline helper\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c47137a99c597330b69057158b26061a360c0e09", "tree": "aacd4cb968b8d7bdebdcbcce19f110469a977243", "parents": [ "29dd59755a849cc6475faa6a75f3b804e23a6fc2" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Feb 06 02:57:51 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Feb 06 02:57:51 2008 +0100" }, "message": "ide: add ide_read_[alt]status() inline helpers\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f2694b7e3bad75436b47b6840de352f7b7f53feb", "tree": "1fa8865fec93cea2eacfa0775d01410927407de8", "parents": [ "afdd360c95632b0c882790a7b25ff505664adcd0" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Feb 06 02:57:50 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Feb 06 02:57:50 2008 +0100" }, "message": "ide: remove redundant BUG_ON() from [atapi_]reset_pollfunc()\n\nSame BUG_ON() is present inside ide_set_handler().\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "578cfa0d72f81526b2fcb1dd2463c47bbf633989", "tree": "045e7d196e79f6cec24d486d5df9e2fbd8dc29d6", "parents": [ "296921a4ca01612cb1d9a43343b33a33eb7697ff" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:47 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:47 2008 +0100" }, "message": "ide: move check_dma_crc() to ide-dma.c\n\n* Move check_dma_crc() to ide-dma.c and add inline version for\n CONFIG_BLK_DEV_IDEDMA\u003dn case.\n\n* Rename check_dma_crc() to ide_check_dma_crc().\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "296921a4ca01612cb1d9a43343b33a33eb7697ff", "tree": "c45dd1c7807b2ef68b91fd7799667bcd56c8e501", "parents": [ "99ffbe0e9713c89798c90bde7a462645e098b76b" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:47 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:47 2008 +0100" }, "message": "ide: remove ide_auto_reduce_xfer()\n\nWhile at it:\n\n* Remove needless \u0027!drive-\u003ecrc_count\u0027 check.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "99ffbe0e9713c89798c90bde7a462645e098b76b", "tree": "08e09cca2575d46087fc160c7253d4740e7a988c", "parents": [ "af10f77390f6c7c5cf6f53e6b3cdaa38562b03af" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:47 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:47 2008 +0100" }, "message": "ide: move drive-\u003ecrc_count check out from check_dma_crc()\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "af10f77390f6c7c5cf6f53e6b3cdaa38562b03af", "tree": "6a5b56c3c55c63cd9f4c70d68ec5d37480e8e068", "parents": [ "5efe7c540ec6021905d443dfe23cc44a11345edd" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:46 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:46 2008 +0100" }, "message": "ide: remove ide_ata66_check()\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "5efe7c540ec6021905d443dfe23cc44a11345edd", "tree": "a2710c7532e26a20429c1d2d223d14ac69660215", "parents": [ "fa017176f7144028aa23c1adcebb1792c891320c" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:46 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:46 2008 +0100" }, "message": "ide: remove set_transfer()\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "fa017176f7144028aa23c1adcebb1792c891320c", "tree": "83c61d1c0608c991f9fb70d56ffab4c8fab05605", "parents": [ "98d2a7aad1cbeb6e75e054bfb09d172b9a175df5" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:46 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:46 2008 +0100" }, "message": "ide: unexport SELECT_DRIVE()\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "629f944bb18c9deccce89ad833f1211c0036a632", "tree": "998dd4d274aafdca25b8f192eebeb91ad63193fe", "parents": [ "835457def90c86fe84d7729c0531fd551fb14eda" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:46 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:46 2008 +0100" }, "message": "ide: use __ide_set_handler() in ide_execute_command()\n\n* Use __ide_set_handler() in ide_execute_command().\n\nWhile at it:\n\n* Fix whitespace damage in ide_execute_command().\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9d501529b688dada3fd90d91b1517e48d5ac3e05", "tree": "455d4f52979dd11abc1ef6dbd3c01128e03118d1", "parents": [ "fbd130887a45341259cde02e134581fb3dac6e14" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:36 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:36 2008 +0100" }, "message": "ide: make probe_hwif() return an error value\n\nMake probe_hwif() return an error value.\n\nWhile at it:\n\n* Remove comment about MAX_DRIVES \u003d\u003d 2 limitation (it is not special to\n probe_hwif(), it is a general assumption taken by a lot of IDE code).\n\n* Rename probe_hwif() to ide_probe_port().\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "58f189fccc72bb8a91de1854e519b47d64fbdbaa", "tree": "977aa91b6dd93ab07b22f60f97e8c91533f9125e", "parents": [ "fadd11c71b5a100fb7560b84a6272b8883082726" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:33 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:33 2008 +0100" }, "message": "ide: delete filenames/versions from comments\n\nDelete filenames/versions from comments.\n\nI\u0027m leaving decisions about adding DRV_VERSION defines and MODULE_VERSION()-s\nto maintainers of the respective drivers.\n\nWhile at it:\n\n* Remove unused VERSION define from ide.c.\n\n* Remove unused/stale DRV_VERSION define from au1xxx-ide.c.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "5a9e77af970f14a94482a6d4dca5c48efb70deb2", "tree": "de3ad64511e39ec9fb8ac8411f7a5469d9e70cd0", "parents": [ "34f5d5ae35240a11846875d76eb935875ab0c366" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:13 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:13 2008 +0100" }, "message": "ide: switch ide_cmd_ioctl() to use REQ_TYPE_ATA_TASKFILE requests\n\nBased on the earlier work by Tejun Heo.\n\nThere should be no functionality changes caused by this patch.\n\nCc: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "81ca691981da718727281238b435dcf1528d2fda", "tree": "4c4845a77d94fe91bd7d1345bf9d992852b8d572", "parents": [ "4f52a32994f9e05fb8ae1a9ba3f20cd0b55145b7" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:08 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:08 2008 +0100" }, "message": "ide: add ide_set_irq() inline helper\n\nThere should be no functionality changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "15ce926ada545cb078711bd9a18c083c93fa01d7", "tree": "9496cda87cae6ef3390c5f350741ad75418dfe8d", "parents": [ "f37aaf9edeba3f4ae10d22aefc09c06af9ea39b6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "message": "ide: merge -\u003edma_host_{on,off} methods into -\u003edma_host_set method\n\nMerge -\u003edma_host_{on,off} methods into -\u003edma_host_set method\nwhich takes \u0027int on\u0027 argument.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f37aaf9edeba3f4ae10d22aefc09c06af9ea39b6", "tree": "167b73d875f3f5c36e9c4378d6e499cf08a46205", "parents": [ "8ae60e34dd737ed3bef64b08130478393d9c4e8a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:02 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:02 2008 +0100" }, "message": "ide: move drive-\u003eusing_dma check to callers of -\u003edma_host_on method\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4a546e046d562bcd389149591fa5a534c8f832ca", "tree": "ffc5c7bd088a0bf74744721b9cfcf18220a75fdf", "parents": [ "378f577f7f75aa18a0eeafb044a491dcd5aeaa3d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:01 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:01 2008 +0100" }, "message": "ide: remove -\u003eide_dma_on and -\u003edma_off_quietly methods from ide_hwif_t\n\n* Make ide_dma_off_quietly() and __ide_dma_on() always available.\n\n* Drop \"__\" prefix from __ide_dma_on().\n\n* Check for presence of -\u003edma_host_on instead of -\u003eide_dma_on.\n\n* Convert all users of -\u003eide_dma_on and -\u003edma_off_quietly methods\n to use ide_dma_on() and ide_dma_off_quietly() instead.\n\n* Remove no longer needed -\u003eide_dma_on and -\u003edma_off_quietly methods\n from ide_hwif_t.\n\n* Make ide_dma_on() void.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "aea5d375600f132537adf45942c0fbdcd25eb995", "tree": "6226c25e9024a35755d193440e6e03ab27eef066", "parents": [ "29ec683f019608ca0cb6cf69011426ecb5daa69e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:12:59 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:12:59 2008 +0100" }, "message": "ide: (hopefully) fix VDMA for CS5520\n\n* Set the correct hwif-\u003edma_base for the second channel in\n ide_get_or_set_dma_base().\n\n* Remove DMA enable code from cs5520_set_pio_mode(), this can\n be handled by the generic -\u003edma_host_on method now.\n\n* Add VDMA check to ide_config_drive_speed().\n\n* drive-\u003eusing_dma was never enabled since cs5520 host driver\u0027s\n -\u003eide_dma_on method overrided the generic -\u003eide_dma_on (so\n __ide_dma_on() was never called, drive-\u003eusing_dma was never set\n and VDMA was never used since it depends on drive-\u003eusing_dma).\n\n Fix it by using -\u003edma_host_on method instead of -\u003eide_dma_on\n (also add matching -\u003edma_host_off method).\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c2b57cdc1d2976444d451a2a2e43e11b61ed0638", "tree": "f322e4d494d9688afd319fbe88afd6a526bb0154", "parents": [ "d32444771b154c3ec37ebf6439004653560c2411" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:17 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:17 2008 +0100" }, "message": "ide: add ide_tf_read() helper\n\n* Factor out code reading taskfile registers from ide_end_drive_cmd()\n to the new ide_tf_read() helper.\n\n* Add IDE_TFLAG_IN_* taskfile flags to indicate the need to load\n particular IDE taskfile register in ide_tf_read().\n\n* Update ide_end_drive_cmd() to set respective IDE_TFLAG_IN_* taksfile flags.\n\n* Add ide_get_lba_addr() for getting LBA sector address from taskfile struct.\n\n* Factor out code getting sector address from ide_dump_ata_status()\n to the new ide_dump_sector() function.\n\n* Convert ide_dump_sector() to use ide_tf_read() and ide_get_lba_addr().\n\n* Remove no longer needed ide_read_24().\n\nThe only change in functionality caused by this patch is that\nide_dump_ata_status() no longer prints \"high\"/\"low\" parts of LBA48\nsector address (of course LBA48 sector address is still printed).\n\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "d32444771b154c3ec37ebf6439004653560c2411", "tree": "953c1a943c6e0fa44898f5ba5ca1c45e65c2ae1c", "parents": [ "f6e29e35cc0f9facf2eb0b0454f9b09021b5aa6f" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:17 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:17 2008 +0100" }, "message": "ide: fix registers loading order in ide_dump_ata_status()\n\nFix registers loading order in ide_dump_ata_status()/ide_read_24().\n\nLoad registers in this order:\n* IDE_SECTOR_REG\n* IDE_LCYL_REG\n* IDE_HCYL_REG\n* IDE_SELECT_REG\n\nIt shouldn\u0027t affect anything (just a usual paranoia to separate changes\nwhich change the way in which hardware is accessed from code cleanups).\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f919790f8c929ab1b392ad1a0c2e1b53337b5071", "tree": "3b81af4512e5e4232af74f1bb1df6ede9a19a5fb", "parents": [ "cd3dbc99da337f2130f3cb2691fbb65c8bf22337" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:13 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:13 2008 +0100" }, "message": "ide: remove SELECT_INTERRUPT()\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "cd3dbc99da337f2130f3cb2691fbb65c8bf22337", "tree": "c50ae590f17dc7f68d884b0f02c09c860c76c0e3", "parents": [ "2fc573881957337c4ea1c84b92d2f27d076cad57" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:13 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:13 2008 +0100" }, "message": "ide: remove QUIRK_LIST()\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4ee06b7e677da4c75f2fcc5fd850543852d18bf2", "tree": "0c7c4b1e2be3179cc25e95f4148577cd9047e398", "parents": [ "f1ca6d37f991347b87d86430db42e2ab139d1b1d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:08 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:08 2008 +0100" }, "message": "ide: remove stale ide.h \"configuration options\"\n\nRemove stale ide.h \"configuration options\":\n\n* INITIAL_MULT_COUNT - always defined to 0\n\n* SUPPORT_SLOW_DATA_PORTS - unused\n\n* OK_TO_RESET_CONTROLLER - always defined to 1\n\n* DISABLE_IRQ_NOSYNC - always defined to 0\n\nLeave SUPPORT_VLB_SYNC (defined to 0 for CRIS and FRV, otherwise to 1)\nfor now but disallow overriding it by \u003casm/ide.h\u003e.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f1ca6d37f991347b87d86430db42e2ab139d1b1d", "tree": "2d18b6a9098a8a4c10f746d7ddc43dcf8e587728", "parents": [ "7b5da4be3718c6b4cd771fb82e3e481b04790f0e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:08 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:08 2008 +0100" }, "message": "ide: remove CONFIG_IDEPCI_SHARE_IRQ config option\n\nWe can safely remove CONFIG_IDEPCI_SHARE_IRQ and always support\nPCI IRQ sharing.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "650d841d9e053a618dd8ce753422f91b493cf2f6", "tree": "70f81acbf856e4a4d8126bdf6d60144b374cc1a9", "parents": [ "cd2a2d969761c26542095c01324201ca0b3ee896" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:06 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:06 2008 +0100" }, "message": "ide: add struct ide_taskfile (take 2)\n\n* Don\u0027t set write-only ide_task_t.hobRegister[6] and ide_task_t.hobRegister[7]\n in idedisk_set_max_address_ext().\n\n* Add struct ide_taskfile and use it in ide_task_t instead of tfRegister[]\n and hobRegister[].\n\n* Remove no longer needed IDE_CONTROL_OFFSET_HOB define.\n\n* Add #ifndef/#endif __KERNEL__ around definitions of {task,hob}_struct_t.\n\nWhile at it:\n\n* Use ATA_LBA define for LBA bit (0x40) as suggested by Tejun Heo.\n\nv2:\n* Add missing newlines. (Noticed by Sergei)\n\n* Use ~ATA_LBA instead of 0xBF. (Noticed by Sergei)\n\n* Use unnamed unions for error/feature and status/command.\n (Suggested by Sergei).\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "cd2a2d969761c26542095c01324201ca0b3ee896", "tree": "fa95d329ac2f2ae3fca30833b8b0ec91aefbd243", "parents": [ "1c029fd658baa2442e8e51dc9c819301cad95777" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:06 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:06 2008 +0100" }, "message": "ide: remove task_ioreg_t typedef (take 2)\n\nRemove task_ioreg_t typedef from the kernel code (but leave it\nin \u003clinux/hdreg.h\u003e for #ifndef/#endif __KERNEL__ case).\n\nWhile at it also move sata_ioreg_t typedef under #ifndef/#endif __KERNEL__.\n\nv2:\nRemove name of the second parameter from ide_execute_command() declaration.\n(Noticed by Sergei).\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b98f8803ccfe9d156d37a6eb471a620904085c80", "tree": "13f2b3ca326f38e9e108f7bbc4888b86343a85dd", "parents": [ "90494893b5d2bf7533fb65accbfd8cbd6b51b9c3" ], "author": { "name": "George Kibardin", "email": "george-kibardin@yandex.ru", "time": "Thu Jan 10 23:03:42 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Jan 10 23:03:42 2008 +0100" }, "message": "ide: fix cable detection for SATA bridges\n\nSigned-off-by: George Kibardin \u003cgeorge-kibardin@yandex.ru\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "3ab7efe8e2cbcca2d401b43cfcc2fa9a7dac2299", "tree": "7ddbb4d5fdae6f61d23ef0ba2a43aaca23bd2195", "parents": [ "e11b9035a47da66fcd4bafd3a5f6b14f51ca667e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Dec 12 23:31:58 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Dec 12 23:31:58 2007 +0100" }, "message": "ide: DMA reporting and validity checking fixes (take 3)\n\n* ide_xfer_verbose() fixups:\n - beautify returned mode names\n - fix PIO5 reporting\n - make it return \u0027const char *\u0027\n\n* Change printk() level from KERN_DEBUG to KERN_INFO in ide_find_dma_mode().\n\n* Add ide_id_dma_bug() helper based on ide_dma_verbose() to check for invalid\n DMA info in identify block.\n\n* Use ide_id_dma_bug() in ide_tune_dma() and ide_driveid_update().\n\n As a result DMA won\u0027t be tuned or will be disabled after tuning if device\n reports inconsistent info about enabled DMA mode (ide_dma_verbose() does the\n same checks while the IDE device is probed by ide-{cd,disk} device driver).\n\n* Remove no longer needed ide_dma_verbose().\n\nThis patch should fix the following problem with out-of-sync IDE messages\nreported by Nick Warne:\n\n hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache\u003c7\u003ehdd:\n skipping word 93 validity check\n , UDMA(66)\n\nand later debugged by Mark Lord to be caused by:\n\n ide_dma_verbose()\n printk( ... \"2048kB Cache\");\n eighty_ninty_three()\n printk(KERN_DEBUG \"%s: skipping word 93 validity check\\n\");\n ide_dma_verbose()\n printk(\", UDMA(66)\"\n\nPlease note that as a result ide-{cd,disk} device drivers won\u0027t report the\nDMA speed used but this is intended since now DMA mode being used is always\nreported by IDE core code.\n\nv2:\n* fixes suggested by Randy:\n - use KERN_CONT for printk()-s in ide-{cd,disk}.c\n - don\u0027t remove argument name from ide_xfer_verbose() declaration\n\nv3:\n* Remove incorrect check for (id-\u003efield_valid \u0026 1) from ide_id_dma_bug()\n (spotted by Sergei).\n\n* \"XFER SLOW\" -\u003e \"PIO SLOW\" in ide_xfer_verbose() (suggested by Sergei).\n\n* Fix ide_find_dma_mode() to report the correct mode (\u0027mode\u0027 after being\n limited by \u0027req_mode\u0027).\n\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Nick Warne \u003cnick@ukfsn.org\u003e\nCc: Mark Lord \u003clkml@rtr.ca\u003e\nCc: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "e97564f362a93f8c248246c19828895950341252", "tree": "0f78e182251d93707ae303c6615326a8cea06b64", "parents": [ "498f26b45cfc2e16d15f0416a40bc01156c43e92" ], "author": { "name": "Peter Missel", "email": "peter.missel@onlinehome.de", "time": "Tue Nov 27 21:35:57 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Nov 27 21:35:57 2007 +0100" }, "message": "ide: More TSST drives with broken cable detection\n\nAdd more TSST (Toshiba/Samsung) drives to the\n\u0027broken cable detection\u0027 blacklist.\n\nSigned-off-by: Peter Missel (peter.missel@onlinehome.de)\nCc: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "0546cb045ea487d8702c5ae4da6e0eab7baa17ba", "tree": "59bced4fa3d1a8ad375d28bae176ca1a4330dfb5", "parents": [ "8a82387cd235d5251890d53c57bf953d24a76831" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Nov 27 21:35:57 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Nov 27 21:35:57 2007 +0100" }, "message": "ide: remove bogus ide_fix_driveid() comment\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "89613e667f7539defb053795f18653003179cf7e", "tree": "3efcfc63e7b7e999db536955464c361f1e53cb4d", "parents": [ "a1d85864d30181a71243193ed01d322dc0618dc6" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Tue Nov 27 21:35:52 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Nov 27 21:35:52 2007 +0100" }, "message": "ide: don\u0027t set PIO mode on pre-EIDE drives\n\nFix handling of the PIO modes for the pre-EIDE drives that did not support\nthe PIO Flow Control Transfer Mode value (00001 nnn) of the Set Transfer Mode\nfeature by skipping the actual mode programming.\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "01745112de5f721dd5afb06bc60b4a1e65e397ce", "tree": "1a32b215de40514524b293fe31bb67a6dee44442", "parents": [ "26a5b04075f6f2ccf30b22e7f0fc9127c500a698" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Nov 05 21:42:29 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Nov 05 21:42:29 2007 +0100" }, "message": "ide: move ide_fixstring() documentation to ide-iops.c from ide.h\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6d5dd21de497668c44aade803e1689bf131dc1a6", "tree": "b2e1d33b992b72225e11cfa34bbe2a5cfd58b1a9", "parents": [ "127ba2896512699338d997418d7cf5064720b55b" ], "author": { "name": "Adrian Bunk", "email": "bunk@kernel.org", "time": "Mon Nov 05 21:42:26 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Nov 05 21:42:26 2007 +0100" }, "message": "ide: unexport ide_fix_driveid\n\nide_fix_driveid can now be unexported.\n\nSigned-off-by: Adrian Bunk \u003cbunk@kernel.org\u003e\nAcked-by: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8588a2b732928b343233af9b1855705b8286bed4", "tree": "3cf6a518faff182d68cc600eba2aa6be76836daf", "parents": [ "9d434813641abb5d619224e165f391bf352b202b" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 26 20:31:16 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 26 20:31:16 2007 +0200" }, "message": "ide: add SH-S202J to ivb_list[]\n\nFrom the report by Nick Warne.\n\nTested-by: Nick Warne \u003cnick@ukfsn.org\u003e\nCc: Lennart Sorensen \u003clsorense@csclub.uwaterloo.ca\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8a455134091a2ed8012365fcdf5692b80c9bb192", "tree": "d2c9a29d5b6543a050b4715b3a311aeedbdd2311", "parents": [ "bbc615b16d64643a3d22ab4890fde1a685e86d83" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:36 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:36 2007 +0200" }, "message": "ide: remove dead code from ide_driveid_update()\n\n* Remove dead code from ide_driveid_update().\n\nWhile at it:\n\n* Remove useless comment.\n\n* s/HWIF(drive)/drive-\u003ehwif/\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "0ae2e178652753ae1797d407755a3505f7c1d2a7", "tree": "fa725edcfb4b9752ebf2aa49a3e42e158537d4ed", "parents": [ "b8b739d3361c16773a30fe5c0360336bbc19f435" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:55 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:55 2007 +0200" }, "message": "ide: remove -\u003eide_dma_check (take 2)\n\n* Add IDE_HFLAG_TRUST_BIOS_FOR_DMA host flag for host drivers that depend\n on BIOS for programming device/controller for DMA. Set it in cy82c693,\n generic, ns87415, opti621 and trm290 host drivers.\n\n* Add IDE_HFLAG_VDMA host flag for host drivers using VDMA. Set it in cs5520\n host driver.\n\n* Teach ide_tune_dma() about IDE_HFLAG_TRUST_BIOS_FOR_DMA flag.\n\n* Add generic ide_dma_check() helper and remove all open coded -\u003eide_dma_check\n implementations. Fix all places checking for presence of -\u003eide_dma_check\n hook to check for -\u003eide_dma_on instead.\n\n* Remove no longer needed code from config_drive_for_dma().\n\n* Make ide_tune_dma() static.\n\nv2:\n* Fix config_drive_for_dma() return values.\n\n* Fix ide-dma.c build for CONFIG_BLK_DEV_IDEDMA_PCI\u003dn by adding\n dummy config_drive_for_dma() inline.\n\n* Fix IDE_HFLAG_TRUST_BIOS_FOR_DMA handling in ide_dma_check().\n\n* Fix init_hwif_it8213() comment.\n\nThere should be no functionality changes caused by this patch.\n\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "76bb7782c6831bf450b964eb7596e21bcd23fc32", "tree": "cc6fbeaa9ef9f06c946e9f2875decf2df2556f79", "parents": [ "b140b99c413ce410197cfcd4014e757cd745226a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:52 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:52 2007 +0200" }, "message": "ide: remove CONFIG_IDEDMA_IVB config option\n\nDevices which don\u0027t set word 93 validation bit should be now handled by\nide-iops.c::ivb_list[] and for debugging purposes cable detection can be\ncompletely overriden with \"idex\u003data66\" parameter.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b140b99c413ce410197cfcd4014e757cd745226a", "tree": "3fc699cbddafe7ef8b6aca284c0e9f2463d34258", "parents": [ "88b2b32babd46cd54d2de4d17eb869aea3383e11" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:51 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:51 2007 +0200" }, "message": "ide: change master/slave IDENTIFY order\n\nNeed to probe slave device first to make it release PDIAG-\n(this is required for correct device side cable detection).\n\nBased on libata commit f31f0cc2f0b7527072d94d02da332d9bb8d7d94c.\n\nThanks to Craig for testing this patch.\n\nCc: Craig Block \u003cchblock3@yahoo.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "88b2b32babd46cd54d2de4d17eb869aea3383e11", "tree": "d446864f7c3431f8c428eecacd11caf7b794f018", "parents": [ "6e249395eace037ef139a1c8996b31e3797e412a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:51 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:51 2007 +0200" }, "message": "ide: move ide_config_drive_speed() calls to upper layers (take 2)\n\n* Convert {ide_hwif_t,ide_pci_device_t}-\u003ehost_flag to be u16.\n\n* Add IDE_HFLAG_POST_SET_MODE host flag to indicate the need to program \n the host for the transfer mode after programming the device. Set it\n in au1xxx-ide, amd74xx, cs5530, cs5535, pdc202xx_new, sc1200, pmac\n and via82cxxx host drivers.\n\n* Add IDE_HFLAG_NO_SET_MODE host flag to indicate the need to completely\n skip programming of host/device for the transfer mode (\"smart\" hosts).\n Set it in it821x host driver and check it in ide_tune_dma().\n\n* Add ide_set_pio_mode()/ide_set_dma_mode() helpers and convert all\n direct -\u003eset_pio_mode/-\u003espeedproc users to use these helpers.\n\n* Move ide_config_drive_speed() calls from -\u003eset_pio_mode/-\u003espeedproc\n methods to callers.\n\n* Rename -\u003espeedproc method to -\u003eset_dma_mode, make it void and update\n all implementations accordingly.\n\n* Update ide_set_xfer_rate() comments.\n\n* Unexport ide_config_drive_speed().\n\nv2:\n* Fix issues noticed by Sergei:\n - export ide_set_dma_mode() instead of moving -\u003eset_pio_mode abuse wrt\n to setting DMA modes from sc1200_set_pio_mode() to do_special()\n - check IDE_HFLAG_NO_SET_MODE in ide_tune_dma()\n - check for (hwif-\u003eset_pio_mode) \u003d\u003d NULL in ide_set_pio_mode()\n - check for (hwif-\u003eset_dma_mode) \u003d\u003d NULL in ide_set_dma_mode()\n - return -1 from ide_set_{pio,dma}_mode() if -\u003eset_{pio,dma}_mode \u003d\u003d NULL\n - don\u0027t set -\u003eset_{pio,dma}_mode on it821x in \"smart\" mode\n - fix build problem in pmac.c\n - minor fixes in au1xxx-ide.c/cs5530.c/siimage.c\n - improve patch description\n\nChanges in behavior caused by this patch:\n- HDIO_SET_PIO_MODE ioctl would now return -ENOSYS for attempts to change\n PIO mode if it821x controller is in \"smart\" mode\n- removal of two debugging printk-s (from cs5530.c and sc1200.c)\n- transfer modes 0x00-0x07 passed from user space may be programmed twice on\n the device (not really an issue since 0x00 is not supported correctly by\n any host driver ATM, 0x01 is not supported at all and 0x02-0x07 are invalid)\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "aedea5910ce44fea79e2c517bb22e0006372156f", "tree": "5e9c84f0c045058594a80a2bc67b358f80d1d884", "parents": [ "3b2d0093b8eb2b0b4adc86138edee9f6d376cafb" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:50 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:50 2007 +0200" }, "message": "ide-pmac: remove pmac_ide_do_setfeature() (take 2)\n\nUse ide_config_drive_speed() instead of pmac_ide_do_setfeature() and remove\nthe latter, also ide-iops.c::__ide_wait_stat() could be static again.\n\nSince for IDE PMAC host driver IDE_CONTROL_REG is always true, device\u0027s\n-\u003equirk_list is always zero and -\u003eide_dma_host_{on,off} are nops than\nthe only changes in behavior are:\n\n* if PIO mode is set then -\u003edma_off_queitly is called to disable DMA\n\n* if setting transfer mode fails ide_dump_status() is called to dump status\n\nv2:\n* IDE PMAC controllers allow separate PIO and DMA timings and PPC userland\n depends on this fact, and calls \"hdparm -p\" without calling \"hdparm -d\".\n\n Therefore to compensate for DMA being disabled by ide_config_drive_speed()\n for PIO modes:\n\n - add IDE_HFLAG_SET_PIO_MODE_KEEP_DMA flag and set it in PMAC host driver\n\n - add handling of the new flag to ide-io.c::do_special()\n\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ddf151026a293725507fedc39b18ae6edb86d775", "tree": "649de86d3de0bfc686ce92e94a2f46979fc2fbfc", "parents": [ "218ee5f364ed006403f1bbe3c1da5af51b1bdb2a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:49 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:49 2007 +0200" }, "message": "ide-pmac: use __ide_wait_stat()\n\n* Use __ide_wait_stat() instead of wait_for_ready() in pmac_ide_do_setfeature().\n\nWhile at it do following changes to match __ide_wait_stat() call in\nide_config_drive_speed():\n\n* Wait WAIT_CMD time (20 sec) instead of 2 sec for device to clear BUSY_STAT.\n\n* Check DRQ_STAT bit (shouldn\u0027t be set for good device status).\n\nAlso remove no longer needed wait_for_ready() from ide-iops.c.\n\nAcked-by: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "74af21cf4d0ab67df53608753a443dc7904ec12e", "tree": "0e5cbfdc12dbd00fcde2ccf08c7df59e3424ff11", "parents": [ "fd553ce86893e0a54ec0d07d1f1d241f2fb2aef3" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:49 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:49 2007 +0200" }, "message": "ide: add __ide_wait_stat() helper\n\n* Split off checking of the status register from ide_wait_stat() to\n __ide_wait_stat() helper.\n\n* Use the new helper in ide_config_drive_speed(). The only change in the\n functionality is that the function now fails if after 20 sec (WAIT_CMD)\n device is still busy (BUSY_STAT bit is set) while previously instead of\n failing the function continued with checking for the correct device status\n (which would give the device additional 10 usec to clear BUSY_STAT bit).\n\n* Remove stale comment for ide_config_drive_speed().\n\n* Remove duplicate comment for ide_wait_stat() from \u003clinux/ide.h\u003e.\n\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "26bcb879c03254545a19c6700fe5bcef6f21e7b1", "tree": "dc35f1a7d7860fe0de268ff92189ff0884b689d3", "parents": [ "842c19ad6fc0dbd9ac9d2f8527466201802934cf" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:54:00 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:54:00 2007 +0200" }, "message": "ide: add ide_set{_max}_pio() (take 4)\n\n* Add IDE_HFLAG_ABUSE_{PREFETCH,FAST_DEVSEL,DMA_MODES} flags\n and set them in ht6560, cmd640, cmd64x and sc1200 host drivers.\n\n* Add set_pio_mode_abuse() for checking if host driver has a non-standard\n -\u003etuneproc() implementation and use it in do_special().\n\n* Add ide_set_pio() for setting PIO mode (it uses hwif-\u003epio_mask to find\n the maximum PIO mode supported by the host), also add ide_set_max_pio()\n wrapper for ide_set_pio() to use for auto-tuning. Convert users of\n -\u003etuneproc to use ide_set{_max}_pio() where possible. This leaves only\n do_special(), set_using_pio(), ide_hwif_restore() and ide_set_pio() as\n a direct users of -\u003etuneproc.\n\n* Remove no longer needed ide_get_best_pio_mode() calls and printk-s\n reporting PIO mode selected from -\u003etuneproc implementations.\n\n* Rename -\u003etuneproc hook to -\u003eset_pio_mode and make \u0027pio\u0027 argument const.\n\n* Remove stale comment from ide_config_drive_speed().\n\nv2:\n* Fix \"ata_\" prefix (Noticed by Jeff).\n\nv3:\n* Minor cleanups/fixups per Sergei\u0027s suggestions.\n\nv4:\n* Fix compile problem in drivers/ide/pci/cmd640.c\n (Noticed by Andrew Morton).\n\n* Improve some -\u003eset_pio_mode comments.\n\nReviewed-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6c3c22f3cb2b7cd0a42a024b93db76b5c3133d37", "tree": "13cd84e47c9d354930443ef7db2df1985446ffc4", "parents": [ "7293136810936bbde403bcb67ac1b4dbae4dd790" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Tue Sep 11 22:28:36 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Sep 11 22:28:36 2007 +0200" }, "message": "ide: add ide_dev_is_sata() helper (take 2)\n\nMake the SATA drive detection code from eighty_ninty_three() into inline\nide_dev_is_sata() helper fixing it along the way to be more strict while\nchecking word 80 for the reserved values...\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b0244a00451c1ad64bf0a51f50679f7146786780", "tree": "14f7725795ba27712a6d76820dde336ad6a17ef8", "parents": [ "76e1faa7cfd464fa06a9c2cafd633d643daafeae" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:57 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:57 2007 +0200" }, "message": "ide-disk: workaround for buggy HPA support on ST340823A (take 3)\n\nThis disk reports total number of sectors instead of maximum sector address\nin response to READ_NATIVE_MAX_ADDRESS command and also happily accepts\nSET_MAX_ADDRESS command with the bogus value. This results in +1 sector\ncapacity being used and errors on attempts to use the last sector.\n\n...\nhdd: Host Protected Area detected.\n        current capacity is 78165360 sectors (40020 MB)\n        native  capacity is 78165361 sectors (40020 MB)\nhdd: Host Protected Area disabled.\n...\nhdd: reading: block\u003d78165360, sectors\u003d1, buffer\u003d0xc1e63000\nhdd: dma_intr: status\u003d0x51 { DriveReady SeekComplete Error }\nhdd: dma_intr: error\u003d0x10 { SectorIdNotFound }, LBAsect\u003d78165360, sector\u003d78165360\n...\n\nAdd hpa_list[] table and workaround the issue in idedisk_check_hpa().\n\nv2:\n* Add missing export and improve patch description a bit.\n\nv3:\n* Add list termination. (From Mikko)\n\nFixes kernel bugzilla bug #8816.\n\nThanks to Mikko for investigating the issue and helping with this patch.\n\nCc: Mikko Rapeli \u003cmikko.rapeli@iki.fi\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "adcd33d41bfea8fb6870cf1f7e7ed2e5f7323fc1", "tree": "5e5694c40371b67317e124b5801f4ceb4c6d4a31", "parents": [ "a5b7e70d787f528386eda025d3e38f545017f241" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:56 2007 +0200" }, "message": "ide: ide_config_drive_speed() bugfixes\n\n* Use -\u003eOUTBSYNC instead of -\u003eOUTB when writing command register\n (needed for scc_pata and pmac host drivers).\n\n* Don\u0027t check DRDY bit of the status register on ATAPI devices\n (ATAPI devices are free to ignore DRDY bit).\n\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nCc: Kou Ishizaki \u003ckou.ishizaki@toshiba.co.jp\u003e\nCc: Akira Iguchi \u003cakira2.iguchi@toshiba.co.jp\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "a5b7e70d787f528386eda025d3e38f545017f241", "tree": "8cef80801bebf9b9d87ae97420b92f15ad3472f3", "parents": [ "59785c8fe23ca2f432bc41ef473a8933ab435812" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:56 2007 +0200" }, "message": "ide: add cable detection for early UDMA66 devices (take 3)\n\n* Move ide_in_drive_list() from ide-dma.c to ide-iops.c.\n\n* Add ivb_list[] table for listening early UDMA66 devices which don\u0027t conform\n to ATA4 standard wrt cable detection (bit14 is zero, only bit13 is valid)\n and use only device side cable detection for them since host side cable\n detection may be unreliable.\n\n* Add model \"QUANTUM FIREBALLlct10 05\" with firwmare \"A03.0900\" to the list\n (from Craig\u0027s bugreport).\n\nv2:\n* Improve kernel message basing on suggestion from Sergei.\n\nv3:\n* Don\u0027t print kernel message when no device side cable detection is done,\n plus some minor fixes. (Noticed by Sergei)\n\nThanks to Craig for testing this patch.\n\nCc: Craig Block \u003cchblock3@yahoo.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "49521f97ccd3c2bf6e71a91cea8fe65d170fa4fb", "tree": "f61c34da6092f2f1a97a78da567afc59ad40850b", "parents": [ "75b1d97535327d0428c6bffd9d5407e65546fd5d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "message": "ide: add short cables support\n\nThis patch allows users to override both host and device side cable detection\nwith \"ideX\u003data66\" kernel parameter. Thanks to this it should be now possible\nto use UDMA \u003e 2 modes on systems (laptops mainly) which use short 40-pin cable\ninstead of 80-pin one.\n\nNext patches add automatic detection of some systems using short cables.\n\nChanges:\n\n* Rename hwif-\u003eudma_four to hwif-\u003ecbl and make it u8.\n\n* Convert all existing users accordingly (use ATA_CBL_* defines while at it). \n\n* Add ATA_CBL_PATA40_SHORT support to ide-iops.c:eighty_ninty_three().\n\n* Use ATA_CBL_PATA40_SHORT for \"ideX\u003data66\" kernel parameter.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nReviewed-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\n" }, { "commit": "7f8f48af0861c38c28d4abd550102643e0ea9e6a", "tree": "6ec47ace87afbd96cc1144d423854b09d9f21d75", "parents": [ "7662d046df09e80680b77b68de896beab45e675e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "message": "ide: cable detection fixes (take 2)\n\nTejun\u0027s recent eighty_ninty_three() fix has inspired me to do more thorough\nreview of the cable detection code...\n\n* print user-friendly warning about limiting the maximum transfer speed\n to UDMA33 (and the reason behind it) when 80-wire cable is not detected,\n also while at it cleanup eighty_ninty_three() a bit\n\n* use eighty_ninty_three() in ide_ata66_check(), this actually fixes 3 bugs:\n - bit 14 (word 93 validity check) \u003d\u003d 1 \u0026\u0026 bit 13 (80-wire cable test) \u003d\u003d 1\n were used as 80-wire cable present test for CONFIG_IDEDMA_IVB\u003dn case\n (please see FIXME comment in eighty_ninty_three() for more details)\n - CONFIG_IDEDMA_IVB\u003dy/n cases were interchanged\n - check for SATA devices was missing\n\n* remove private cable warnings from pdc_202xx{old,new} drivers now that core\n code provides this functionality (plus, in pdc202xx_new case the test could\n give false warnings for ATAPI devices because pdc202xx_new driver doesn\u0027t\n even support ATAPI DMA)\n\nCc: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "2d5eaa6dd744a641e75503232a01f52d0768884c", "tree": "0736bd00ea3bd032d601d0a676c998cb043b877a", "parents": [ "18137207236285989dfc0ee7f929b954199228f3" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:08 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:08 2007 +0200" }, "message": "ide: rework the code for selecting the best DMA transfer mode (v3)\n\nDepends on the \"ide: fix UDMA/MWDMA/SWDMA masks\" patch.\n\n* add ide_hwif_t.udma_filter hook for filtering UDMA mask\n (use it in alim15x3, hpt366, siimage and serverworks drivers)\n* add ide_max_dma_mode() for finding best DMA mode for the device\n (loosely based on some older libata-core.c code)\n* convert ide_dma_speed() users to use ide_max_dma_mode()\n* make ide_rate_filter() take \"ide_drive_t *drive\" as an argument instead\n of \"u8 mode\" and teach it to how to use UDMA mask to do filtering\n* use ide_rate_filter() in hpt366 driver\n* remove no longer needed ide_dma_speed() and *_ratemask()\n* unexport eighty_ninty_three()\n\nv2:\n* rename -\u003efilter_udma_mask to -\u003eudma_filter\n [ Suggested by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nv3:\n* updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space\n originated transfer mode change requests when 100MHz clock is used)\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "23450319e2890986c247ec0aa1442f060e657e6d", "tree": "c30fc173d8b97343f8ae7b1b1ed511366af256ab", "parents": [ "90f30eccf41302a2542f5d374af243061902bd98" ], "author": { "name": "Suleiman Souhlal", "email": "suleiman@google.com", "time": "Tue Apr 10 22:38:37 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Apr 10 22:38:37 2007 +0200" }, "message": "ide: correctly prevent IDE timer expiry function to run if request was already handled\n\nIt is possible for the timer expiry function to run even though the\nrequest has already been handled: ide_timer_expiry() only checks that\nthe handler is not NULL, but it is possible that we have handled a\nrequest (thus clearing the handler) and then started a new request\n(thus starting the timer again, and setting a handler). \n\nA simple way to exhibit this is to set the DMA timeout to 1 jiffy and\nrun dd: The kernel will panic after a few minutes because\nide_timer_expiry() tries to add a timer when it\u0027s already active.\n\nTo fix this, we simply add a request generation count that gets\nincremented at every interrupt, and check in ide_timer_expiry() that\nwe have not already handled a new interrupt before running the expiry\nfunction.\n\nSigned-off-by: Suleiman Souhlal \u003csuleiman@google.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "513daadd152ddbf32cb6d0447ddba3427ce5b8e8", "tree": "994549525a3830b496af552dee1fd73227f36373", "parents": [ "362ebd83adb4ff2761b6f49a3570f501c3c7e467" ], "author": { "name": "Suleiman Souhlal", "email": "suleiman@google.com", "time": "Mon Mar 26 23:03:20 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Mar 26 23:03:20 2007 +0200" }, "message": "ide: use correct IDE error recovery\n\nIDE error recovery is using IDLE IMMEDIATE if the drive is busy or has DRQ set.\nThis violates the ATA spec (can only send IDLE IMMEDIATE when drive is not\nbusy) and really hoses up some drives (modern drives will not be able to\nrecover using this error handling). The correct thing to do is issue a SRST\nfollowed by a SET FEATURES command. This is what Western Digital recommends\nfor error recovery and what Western Digital says Windows does.  It also does\nnot violate the ATA spec as far as I can tell.\n\nBart:\n* port the patch over the current tree\n* undo the recalibration code removal\n* send SET FEATURES command after checking for good drive status\n* don\u0027t check whether the current request is of REQ_TYPE_ATA_{CMD,TASK}\n type because we need to send SET FEATURES before handling any requests\n* some pre-ATA4 drives require INITIALIZE DEVICE PARAMETERS command before\n other commands (except IDENTIFY) so send SET FEATURES only if there are\n no pending drive-\u003especial requests\n* update comments and patch description\n* any bugs introduced by this patch are mine and not Suleiman\u0027s :-)\n\nSigned-off-by: Suleiman Souhlal \u003csuleiman@google.com\u003e\nAcked-by: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f68d9320cd06fdec19735143b42e5197b63165b4", "tree": "6749bcf98762a467d1a254b9b50f462b1294050e", "parents": [ "e0f2e3a06be513352cb4955313ed7e55909acd84" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Mar 26 23:03:18 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Mar 26 23:03:18 2007 +0200" }, "message": "ide: revert \"ide: fix drive side 80c cable check, take 2\" for now\n\n\"ide: fix drive side 80c cable check, take 2\" patch from Tejun Heo (commit\nfab59375b9543f84d1714f7dd00f5d11e531bd3e) fixed 80c bit test (bit13 of word93)\nbut we also need to fix master/slave IDENTIFY order (slave device should be\nprobed first in order to make it release PDIAG- signal) and we should also\ncheck for pre-ATA3 slave devices (which may not release PDIAG- signal).\n\n[ Unfortunately the fact that IDE driver doesn\u0027t reset devices itself helps\n only a bit as it seems that some BIOS-es reset ATA devices after programming\n the chipset, some BIOS-es can be set to not probe/configure selected devices,\n there may be no BIOS in case of add-on cards etc. ]\n\nSince we are quite late in the release cycle and the required changes will\naffect a lot of systems just revert the fix for now.\n\n[ Please also see libata commit f31f0cc2f0b7527072d94d02da332d9bb8d7d94c. ]\n\nThanks goes out to Fernando Mitio Yamada for reporting the problem\nand patiently testing patches.\n\nAcked-by: Tejun Heo \u003chtejun@gmail.com\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "fab59375b9543f84d1714f7dd00f5d11e531bd3e", "tree": "06b102c2c4821fb3af4687156c146d0d663c5392", "parents": [ "f92d50e6fd14f6e4601f59aac4cffe617b7b2ce6" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Sat Mar 03 17:48:53 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 03 17:48:53 2007 +0100" }, "message": "ide: fix drive side 80c cable check, take 2\n\neighty_ninty_three() had word 93 validitity check but not the 80c bit\ntest itself (bit 13). This increases the chance of incorrect wire\ndetection especially because host side cable detection is often\nunreliable and we sometimes soley depend on drive side cable\ndetection. Fix it.\n\n[ bart: fix off-by-1 bit name in the patch description ]\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nAcked-by: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ccf352894ceef79d40d015e1deee4c46c3aa42ed", "tree": "e30b2b8a4c30e2ef1719ce9780322e671ebe3c43", "parents": [ "7469aaf6a30f4187ed6de7c0aed5c2dd2d1c2d31" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "message": "ide: make ide_hwif_t.ide_dma_host_on void (v2)\n\n* since ide_hwif_t.ide_dma_host_on is called either when drive-\u003eusing_dma \u003d\u003d 1\n or when return value is discarded make it void, also drop \"ide_\" prefix\n* make __ide_dma_host_on() void and drop \"__\" prefix\n\nv2:\n* while at it rename atiixp_ide_dma_host_on() to atiixp_dma_host_on()\n and sgiioc4_ide_dma_host_on() to sgiioc4_dma_host_on().\n [ Noticed by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "7469aaf6a30f4187ed6de7c0aed5c2dd2d1c2d31", "tree": "079930f23b3d14e4ad29ab972bc6d91fde52e5f0", "parents": [ "3608b5d71a52c053787dbad6af20c25f7e0b75a9" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "message": "ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void (v2)\n\n* since ide_hwif_t.ide_dma_{host_off,off_quietly} always return \u00270\u0027\n make these functions void and while at it drop \"ide_\" prefix\n* fix comment for __ide_dma_off_quietly()\n* make __ide_dma_{host_off,off_quietly,off}() void and drop \"__\" prefix\n\nv2:\n* while at it rename atiixp_ide_dma_host_off() to atiixp_dma_host_off(),\n sgiioc4_ide_dma_{host_off,off_quietly}() to sgiioc4_dma_{host_off,off_quietly}()\n and sl82c105_ide_dma_off_quietly() to sl82c105_dma_off_quietly()\n [ Noticed by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "0ecdca26e556eae9668ce6de9554757dddb942ef", "tree": "21d62c01d0c0d5aeea2524252ed8dec6ca20b6d4", "parents": [ "7569e8dc2213ecc47024ea5edbadc8736487d926" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "message": "ide: use PIO/MMIO operations directly where possible (v2)\n\nThis results in smaller/faster/simpler code and allows future optimizations.\nAlso remove no longer needed ide[_mm]_{inl,outl}() and ide_hwif_t.{INL,OUTL}.\n\nv2:\n* updated for scc_pata\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "913759ac90a727b86da72efcfb70931f497d1cb7", "tree": "f95e10f757e93eca8eacbf03985c09994ec4ef46", "parents": [ "b86cc29dc42203588264d917e88134bdd500b0d7" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Tue Oct 03 01:14:33 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Tue Oct 03 08:04:08 2006 -0700" }, "message": "[PATCH] ide: Fix crash on repeated reset\n\nMichal Miroslaw reported a problem (bugzilla #7023) where a user initiated\nreset while the IDE layer was already resetting the channel caused a crash,\nand provided a rough fix.\n\nThis is a slightly cleaner version of the fix which tracks the reset state\nand blocks further reset requests while a reset is in progress.\n\nNote this is not a security issue - random end users can\u0027t access the\nioctl in question anyway.\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nCc: Michal Miroslaw \u003cmirq-linux@rere.qmqm.pl\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "1e86240f3fd33f8052141778ad3dffe2c96184d7", "tree": "70d177ecd0b28480b0099e0b5a81b51f8cdfb7be", "parents": [ "0e1dfc66b6ec94984a4778132147a8aa36461d58" ], "author": { "name": "Michal Schmidt", "email": "xschmi00@stud.feec.vutbr.cz", "time": "Sun Jul 30 03:03:29 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Mon Jul 31 13:28:39 2006 -0700" }, "message": "[PATCH] IDE: Touch NMI watchdog during resume from STR\n\nWhen resuming from suspend-to-RAM, the NMI watchdog detects a lockup in\nide_wait_not_busy. Here\u0027s a screenshot of the trace taken by a digital\ncamera: http://www.uamt.feec.vutbr.cz/rizeni/pom/DSC03510-2.JPG\n\nLet\u0027s touch the NMI watchdog in ide_wait_not_busy. The system then resumes\ncorrectly from STR.\n\n[akpm@osdl.org: modular build fix]\nSigned-off-by: Michal Schmidt \u003cxschmi00@stud.feec.vutbr.cz\u003e\nAcked-by: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "6ab3d5624e172c553004ecc862bfeac16d9d68b7", "tree": "6d98881fe91fd9583c109208d5c27131b93fa248", "parents": [ "e02169b682bc448ccdc819dc8639ed34a23cedd8" ], "author": { "name": "Jörn Engel", "email": "joern@wohnheim.fh-wedel.de", "time": "Fri Jun 30 19:25:36 2006 +0200" }, "committer": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Fri Jun 30 19:25:36 2006 +0200" }, "message": "Remove obsolete #include \u003clinux/config.h\u003e\n\nSigned-off-by: Jörn Engel \u003cjoern@wohnheim.fh-wedel.de\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\n" }, { "commit": "1a1276e7b6cba549553285f74e87f702bfff6fac", "tree": "4765d49634c9c1c0aca565287ba28b6c1b5910f9", "parents": [ "1e866f0bf89e829736a12599bb7f476d1c378646" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Wed Jun 28 04:26:58 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Wed Jun 28 14:59:06 2006 -0700" }, "message": "[PATCH] Old IDE, fix SATA detection for cabling\n\nThis is based on the proposed patches flying around but also checks that\nthe device in question is new enough to have word 93 rather thanb blindly\nassuming word 93 \u003d\u003d 0 means SATA (see ATA-5, ATA-7)\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "125e18745f16685f69a34fd6130d47598fc4bf54", "tree": "c97ed94b0525a572efa1bd4990a55b18be5d781d", "parents": [ "78ce89c92bc6eaf5933b5664bff64253a7103bd7" ], "author": { "name": "Eric Sesterhenn", "email": "snakebyte@gmx.de", "time": "Fri Jun 23 02:06:06 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Fri Jun 23 07:43:08 2006 -0700" }, "message": "[PATCH] More BUG_ON conversion\n\nSigned-off-by: Eric Sesterhenn \u003csnakebyte@gmx.de\u003e\nSigned-off-by: Alexey Dobriyan \u003cadobriyan@gmail.com\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: James Bottomley \u003cJames.Bottomley@steeleye.com\u003e\nAcked-by: \"Salyzyn, Mark\" \u003cmark_salyzyn@adaptec.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "6842f8c8dac7c06cbf0aac87824f1ff337be31cb", "tree": "7e1e185607d4c6134963d6106af7b3f311c9e976", "parents": [ "9810933701a09f9c4dd0ad963d5ec2efb7df07b7" ], "author": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Fri Feb 03 03:04:55 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Fri Feb 03 08:32:12 2006 -0800" }, "message": "[PATCH] solve false-positive soft lockup messages during IDE init\n\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\nAcked-by: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: Rogio Brito \u003crbrito@ime.usp.br\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "e851b620e775c9f0e00b1c7e35072d6b98097cb9", "tree": "e00b56c73a6a4d6bfbde39bf7f7aa5ac43fe7185", "parents": [ "83ae20c849f1bff32100fa8584408dca99ce4a62" ], "author": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Wed Nov 09 23:07:56 2005 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Nov 09 23:07:56 2005 +0100" }, "message": "[PATCH] ide: possible cleanups\n\nThis patch contains the following possible cleanups:\n- pci/cy82c693.c: make a needlessly global function static\n- remove the following unneeded EXPORT_SYMBOL\u0027s:\n - ide-taskfile.c: do_rw_taskfile\n - ide-iops.c: default_hwif_iops\n - ide-iops.c: default_hwif_transport\n - ide-iops.c: wait_for_ready\n\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e" }, { "commit": "d7d7634c0f021d7d7ed781680d2c88940fc5fee8", "tree": "675463fe87c3c1a4313a39b274cdbeaf5918a797", "parents": [ "c352ec8ab87b065cd2edda171811f49ac7d0d5cd" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Tue Sep 13 01:25:04 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Tue Sep 13 08:22:28 2005 -0700" }, "message": "[PATCH] ide: clean up the garbage in eighty_ninty_three\n\nReplace the foot long pile of festering garbage in eighty_ninty_three with\nsome actual clean code. All the ifdefs are fixed and havent changed since\n2.4\n\nAcked-by: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "68ad9910b0525d0194f9c316c7cb14adbf8e0c0c", "tree": "9d853ef1fdbced01c14749dadffe533c75745df6", "parents": [ "58ecd15652979f2001dc296dcfd303cc1bd33ce7" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Mon Jun 27 15:24:25 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Mon Jun 27 17:36:40 2005 -0700" }, "message": "[PATCH] ide: IDE timing violation on reset\n\nPretty much theoretical for non MMIO thankfully. We _must_ use OUTBSYNC for\ncommands or they may be posted and thus ruin the 400nS required delay.\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nAcked-by: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d", "parents": [], "author": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n" } ] }