)]}' { "log": [ { "commit": "dbecebca1914f414008553b57aefde95b70f9142", "tree": "c575048feff3070053ef7343e5912d264e2cc291", "parents": [ "bcd88ac3b2ff2eae3d0fa57a6b02d4fce5392f32" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Feb 26 21:50:35 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Feb 26 21:50:35 2008 +0100" }, "message": "ide: fix sparse warning about shadowing \u0027flags\u0027 symbol\n\ndrivers/ide/ide.c:801:18: warning: symbol \u0027flags\u0027 shadows an earlier one\ndrivers/ide/ide.c:732:16: originally declared here\n\nAlso fix some whitespace damage while at it.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c53ea18dc29a1ac075119f651d6ac4386a549a34", "tree": "cdee13285dec95667f994af67e8852afec5b3c99", "parents": [ "cbd34d00af2960097ebd46a31dabc8bb9f16ea4e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Feb 26 21:50:34 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Feb 26 21:50:34 2008 +0100" }, "message": "ide: skip probing port if \"hdx\u003dnoprobe\" was used for both devices on it\n\n* Skip probing port if \"hdx\u003dnoprobe\" parameter was used for both devices on it.\n\n* Obsolete \"idex\u003dnoprobe\" parameter - it only works for ide_generic, cmd640\n and PCI hosts in Compatibility mode (on alpha/x86/ia64/m32r/mips/ppc32).\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "cbd34d00af2960097ebd46a31dabc8bb9f16ea4e", "tree": "99dabb8c49db53f42043e5784bf99d1840a1cf9b", "parents": [ "b66cae7672996c1ed0c4c4a4df04ce7b275c61f6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Feb 26 21:50:33 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Feb 26 21:50:33 2008 +0100" }, "message": "ide: remove redundant comment from ide_unregister()\n\nIdentical comment is present in ide_hwif_release_regions() documentation.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2952755ce364b81f904b49397f6b0004dead2c9f", "tree": "a65c7af5df68239a0b024e38ee6d0e852e25c552", "parents": [ "0763446429e46fd973f507f79900b95eb8aae2e4" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Feb 13 23:20:36 2008 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Feb 21 15:27:07 2008 -0800" }, "message": "ide: mark \"ide\u003dreverse\" option as obsolete\n\n- it is valid only if \"Probe IDE PCI devices in the PCI bus order\n (DEPRECATED)\" config option is used\n\n- Greg needs to remove pci_get_device_reverse() for PCI core changes\n\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "eba8ff946177ca38dfde0bf1d8ce0703c45c49b9", "tree": "1ba7c8e628b326d068fd02372e59bedfd55c722f", "parents": [ "cfa2771bc511017159ea076965fe385101e03798" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Feb 11 00:32:13 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Feb 11 00:32:13 2008 +0100" }, "message": "ide: remove stale version number\n\nOn Thursday 03 January 2008, Robert Hancock wrote:\n\n[...]\n\n\u003e How about getting rid of this stupid thing in drivers/ide/ide.c:\n\u003e \n\u003e #define       REVISION        \"Revision: 7.00alpha2\"\n\u003e \n\u003e which is used in:\n\u003e \n\u003e printk(KERN_INFO \"Uniform Multi-Platform E-IDE driver \" REVISION \"\\n\");\n\u003e \n\u003e It\u0027s been 7.00alpha2 for god knows how long, so clearly this version \n\u003e number is not useful..\n\nCc: Robert Hancock \u003chancockr@shaw.ca\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "29dd59755a849cc6475faa6a75f3b804e23a6fc2", "tree": "007f73aed935c22438e69cb2d2438b93f249d955", "parents": [ "f2694b7e3bad75436b47b6840de352f7b7f53feb" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Feb 06 02:57:50 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Feb 06 02:57:50 2008 +0100" }, "message": "ide: remove ide_setup_ports()\n\nide-cris.c:\n* Add cris_setup_ports() helper and use it instead of ide_setup_ports()\n (fixes random value being set in -\u003eio_ports[IDE_IRQ_OFFSET]).\n\nbuddha.c:\n* Add buddha_setup_ports() helper and use it instead of ide_setup_ports().\n\nfalconide.c:\n* Add falconide_setup_ports() helper and use it instead of ide_setup_ports(),\n also fix return value of falconide_init() while at it.\n\ngayle.c:\n* Add gayle_setup_ports() helper and use it instead of ide_setup_ports().\n\nmacide.c:\n* Add macide_setup_ports() helper and use it instead of ide_setup_ports()\n (fixes incorrect value being set in -\u003eio_ports[IDE_IRQ_OFFSET]).\n\nq40ide.c:\n* Fix q40_ide_setup_ports() comments.\n\nide.c:\n* Remove no longer needed ide_setup_ports().\n\nCc: Mikael Starvik \u003cstarvik@axis.com\u003e\nCc: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "92b83c8f3219c36d61a6600ceb422e65c409be59", "tree": "33629e712ff49fb57b30fb68c0de941af17cea91", "parents": [ "b034304a28d15f019ca914e954c3de20df28065e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:45 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:45 2008 +0100" }, "message": "ide: remove -\u003enice0 and -\u003enice2 fields from ide_drive_t\n\n* -\u003enice0 and -\u003enice2 ide_drive_t fields are always zero so remove them.\n\n* IDE_NICE_0 and IDE_NICE_2 defines from \u003clinux/hdreg.h\u003e are no longer\n used by any kernel code so cover them with #ifndef/#endif __KERNEL__.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9e016a719209d95338e314b46c3012cc7feaaeec", "tree": "cc19b160cfb6210385fbf29890351f9ca2ba73df", "parents": [ "f82c2b171905b6d5af92395d8159546351ab602f" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:39 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:39 2008 +0100" }, "message": "ide: add ide_deprecated_find_port() helper\n\n* Factor out code for finding ide_hwifs[] slot from ide_register_hw()\n to ide_deprecated_find_port().\n\n* Convert bast-ide, ide-cs and delkin_cb host drivers to use ide_device_add()\n instead of ide_register_hw() (while at it drop doing \"ide_unregister()\" loop\n which tries to unregister _all_ IDE interfaces if useable ide_hwifs[] slot\n cannot be find).\n\nThis patch leaves us with only two ide_register_hw() users:\n- drivers/macintosh/mediabay.c\n- drivers/ide/ide.c\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f82c2b171905b6d5af92395d8159546351ab602f", "tree": "89790c732a73c3210b5f8578d3a94a2717ab7b3b", "parents": [ "ead741df385607ab74876afdb05fd8ac27da9906" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:39 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:39 2008 +0100" }, "message": "ide: add \u0027init_default\u0027 and \u0027restore\u0027 arguments to ide_unregister()\n\n* Add \u0027init_default\u0027 (flag for calling init_hwif_default()) and \u0027restore\u0027\n (flag for calling ide_hwif_restore()) arguments to ide_unregister().\n\n* Update ide_unregister() users to set \u0027init_default\u0027 and \u0027restore\u0027 flags.\n\n* No need to set \u0027init_default\u0027 flag in ide_register_hw() if the setup done\n by init_hwif_default() is going to be overridden by ide_init_port_hw().\n\n* No need to set \u0027init_default\u0027 and \u0027restore\u0027 flags in cleanup_module().\n\nThere should be no functionality changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ead741df385607ab74876afdb05fd8ac27da9906", "tree": "d2293a1369580250277f0ffc718cec597fb284d6", "parents": [ "2244e850632f82466d7c041546326c7055fc7159" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:38 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:38 2008 +0100" }, "message": "ide: remove redundant init_hwif_default() call from ide_register_hw()\n\nide_init_port_hw() call overrides setup done by init_hwif_default().\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2244e850632f82466d7c041546326c7055fc7159", "tree": "79edb64767f83b1de01296180efaa91d231c1047", "parents": [ "1bee4d1dce2d76bcf0bf9565298c62666de0fa1d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:38 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:38 2008 +0100" }, "message": "ide: remove redundant hwif-\u003epresent check from ide_register_hw()\n\nWe check earlier for hwif-\u003epresent and call ide_unregister() if necessary\n(after ide_unregister() hwif-\u003epresent will be always cleared).\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c413b9b94d9a8e7548cc4b2e04b7df0439ce76fd", "tree": "5d23110a0d1f87ad0c88fb1746194e532808eaab", "parents": [ "1ebf74936b1fccb5b65940f99ccddd74ec4d1fef" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:31 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:31 2008 +0100" }, "message": "ide: add struct ide_port_info instances to legacy host drivers\n\n* Remove \u0027struct pci_dev *dev\u0027 argument from ide_hwif_setup_dma().\n\n* Un-static ide_hwif_setup_dma() and add CONFIG_BLK_DEV_IDEDMA_PCI\u003dn version.\n\n* Add \u0027const struct ide_port_info *d\u0027 argument to ide_device_add[_all]().\n\n* Factor out generic ports init from ide_pci_setup_ports() to ide_init_port(),\n move it to ide-probe.c and call it in in ide_device_add_all() instead of\n ide_pci_setup_ports().\n\n* Move -\u003emate setup to ide_device_add_all() from ide_port_init().\n\n* Add IDE_HFLAG_NO_AUTOTUNE host flag for host drivers that don\u0027t enable\n -\u003eautotune currently.\n\n* Setup hwif-\u003echipset in ide_init_port() but iff pi-\u003echipset is set\n (to not override setup done by ide_hwif_configure()).\n\n* Add ETRAX host handling to ide_device_add_all().\n\n* cmd640.c: set IDE_HFLAG_ABUSE_* also for CONFIG_BLK_DEV_CMD640_ENHANCED\u003dn.\n\n* pmac.c: make pmac_ide_setup_dma() return an error value and move DMA masks\n setup to pmac_ide_setup_device().\n\n* Add \u0027struct ide_port_info\u0027 instances to legacy host drivers, pass them to\n ide_device_add() calls and then remove open-coded ports initialization.\n\nReviewed-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "36e9dc469b1300d8bec6f2ab48b4556e2c4241ba", "tree": "66d18834d7021c4dfad22311778c5c87967fd621", "parents": [ "ae9458d6a0956aa21cb49e1251e35a8d4dacbe6e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:28 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 02 19:56:28 2008 +0100" }, "message": "dtc2278: fix -\u003eio_32bit handling\n\nOn DTC2278 32-bit I/O has to be enabled for both devices on the port\nso always enable it during init time and disallow further changes.\n\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "fbd130887a45341259cde02e134581fb3dac6e14", "tree": "f0725b5febce2f948e02f5d98a5bf3a6a7f658cb", "parents": [ "cae5c82022cd710ff1eedd39ca8c56b081177b18" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:36 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:36 2008 +0100" }, "message": "ide: use ide_remove_port_from_hwgroup in init_irq()\n\nThere should be no functionality changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "96e5ad309c423bc0793e746337d5632ee5a49769", "tree": "cdea77d9084a1d6cd1856fb772261c303d33b44d", "parents": [ "7cba97f12963721eca648d6901b294750a1fa3bd" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:35 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:35 2008 +0100" }, "message": "ide: factor out code removing port from hwgroup from ide_unregister()\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "7cba97f12963721eca648d6901b294750a1fa3bd", "tree": "3a384f824b09ffde7662adbb7a7e55af49a78515", "parents": [ "537f06c5deaffbbe155bcc898369f889e7f3e647" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:35 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:35 2008 +0100" }, "message": "ide: I/O resources are released too early in ide_unregister()\n\nRelease I/O resources after releasing DMA.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "537f06c5deaffbbe155bcc898369f889e7f3e647", "tree": "b50e791f9a33a7e510dd7439ec047ca08c857b9f", "parents": [ "422278ef9585b0be62b1bd6d48935a7529aa5094" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:35 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:35 2008 +0100" }, "message": "ide: cleanup ide_system_bus_speed()\n\nUse the facts that:\n\n* When ide_init() is called \u0027system_bus_speed\u0027 always equals zero.\n\n* system_bus_clock() is never called before ide_init().\n\nand:\n\n* Move printk() from ide_system_bus_speed() to ide_init().\n\n* Don\u0027t assign \u0027system_bus_speed\u0027 in ide_system_bus_speed().\n\n* Don\u0027t call ide_system_bus_speed() in system_bus_clock().\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "59bca8cc995428c34d8cdfadfa87c8e3f01c4340", "tree": "8c50895494db34913d09cc3017b46fe28ec4c102", "parents": [ "58f189fccc72bb8a91de1854e519b47d64fbdbaa" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:33 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:33 2008 +0100" }, "message": "ide: update/add my Copyrights\n\nThe last years stuff and a trip down memory lane...\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "58f189fccc72bb8a91de1854e519b47d64fbdbaa", "tree": "977aa91b6dd93ab07b22f60f97e8c91533f9125e", "parents": [ "fadd11c71b5a100fb7560b84a6272b8883082726" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:33 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:33 2008 +0100" }, "message": "ide: delete filenames/versions from comments\n\nDelete filenames/versions from comments.\n\nI\u0027m leaving decisions about adding DRV_VERSION defines and MODULE_VERSION()-s\nto maintainers of the respective drivers.\n\nWhile at it:\n\n* Remove unused VERSION define from ide.c.\n\n* Remove unused/stale DRV_VERSION define from au1xxx-ide.c.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "36501650ec45b1db308c3b51886044863be2d762", "tree": "74cf9d9f313e510f8424f9bac35da8d61cce9f7b", "parents": [ "f6fb786d6dcdd7d730e4fba620b071796f487e1b" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:31 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Feb 01 23:09:31 2008 +0100" }, "message": "ide: keep pointer to struct device instead of struct pci_dev in ide_hwif_t\n\nKeep pointer to struct device instead of struct pci_dev in ide_hwif_t.\n\nWhile on it:\n* Use *dev-\u003edma_mask instead of pci_dev-\u003edma_mask in ide_toggle_bounce().\n\nThere should be no functionality changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "852738f39258deafb3d89c187cb1a4050820d555", "tree": "0b6fe1d16d9d7413d7593454a4f312ad7c709670", "parents": [ "145b75e9aedbe36c55e45da8564dcd0814bdd89e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:12 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:12 2008 +0100" }, "message": "ide: convert \"empty\" REQ_TYPE_ATA_CMD requests to use REQ_TYPE_ATA_TASKFILE\n\nBased on the previous work by Tejun Heo.\n\nThere should be no functionality changes caused by this patch.\n\nCc: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "145b75e9aedbe36c55e45da8564dcd0814bdd89e", "tree": "2bf27bb6657b28d12404de416276bca1c2ba52a4", "parents": [ "2624565caacedd740fce7803fe2c162842aa5df4" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:11 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:11 2008 +0100" }, "message": "ide: initialize rq-\u003ecmd_type in ide_init_drive_cmd() callers\n\n* Initialize rq-\u003ecmd_type in ide_wait_cmd(), ide_cmd_ioctl() and\n set_pio_mode() (other callers were aleady over-riding rq-\u003ecmd_type).\n\n* Remove no longer needed rq-\u003ecmd_type setup from ide_init_drive_cmd().\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9e47be0c97f7357b80e91dc0632e9cce2eb025e0", "tree": "7047b2b3c9ac094b801d376e4bbb95292b1962ac", "parents": [ "3a5015cc9d7051ce8e706ef48276d8484aac0c4b" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:09 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:09 2008 +0100" }, "message": "ide: remove broken disk byte-swapping support\n\nRemove broken disk byte-swapping support:\n- it can cause a data corruption on SMP (or if using PREEMPT on UP)\n- all data coming from disk are byte-swapped by taskfile_*_data() which\n results in incorrect identify data being reported by /proc/ide/ and IOCTLs\n- \"hdx\u003dbswap/byteswap\" kernel parameter has been broken on m68k host drivers\n (including Atari/Q40 ones) since 2.5.x days (because of \u0027hwif\u0027 zero-ing)\n- byte-swapping is limited to PIO transfers (for working with TiVo disks on\n x86 machines using user-space solutions or dm-byteswap should result in\n much better performance because DMA can be used)\n\nFor previous discussions please see:\n\nhttp://www.ussg.iu.edu/hypermail/linux/kernel/0201.0/0768.html\nhttp://lkml.org/lkml/2004/2/28/111\n\n[ I have dm-byteswap device mapper target if somebody is interested\n (patch is for 2.6.4 though but I\u0027ll dust it off if needed). ]\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ade2daf9c6e57845fe83a24e0a9fa1c03c6e91b1", "tree": "68070062d6306442caee50630c4213c911eb9064", "parents": [ "8ac4ce742c66100931b6f2d7a36b0df08bc721fe" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:07 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:07 2008 +0100" }, "message": "ide: make remaining built-in only IDE host drivers modular (take 2)\n\n* Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c\n file for probing PCI host drivers registered with IDE core (special case\n for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER\u003dy) and then take care of\n the ordering in which all IDE host drivers are probed when IDE is built-in\n during link time.\n\n* Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch\n specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris\n arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific).\n\n* Move probing of ide-cris (cris arch specific) host driver before cmd640\n (x86 arch specific).\n\n* Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends\n on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300\n (h8300 arch specific).\n\n* Add \"probe_vlb\" kernel parameter to cmd640 host driver and update\n Documentation/ide.txt accordingly.\n\n* Make IDE_ARM config option visible so it can also be disabled if needed.\n\n* Remove bogus comment from ide.c while at it.\n\nv2:\n* Fix two issues spotted by Sergei:\n - replace ENOMEM error value by ENOENT in ide-h8300 host driver\n - fix MODULE_PARM_DESC() in cmd640 host driver\n\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Mikael Starvik \u003cstarvik@axis.com\u003e\nCc: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nCc: Roman Zippel \u003czippel@linux-m68k.org\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8ac4ce742c66100931b6f2d7a36b0df08bc721fe", "tree": "bc44edb8d6ec9057d24aa4c986729e1ca9f3f860", "parents": [ "ac87e41116c229fc1efaac0d17fdbfb2185e4629" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:06 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:06 2008 +0100" }, "message": "ide: fix host drivers depending on ide_generic to probe for interfaces (take 2)\n\n* Add mpc8xx_ide_probe() to mpc8xx.c and call it from probe_for_hwifs().\n\n* Convert ide_arm, ide-cris, ide-h8300, ide-pnp, buddha, falconide, gayle,\n macide, q40ide, cmd640 and mpc8xx host drivers to use ide_device_add().\n\n This removes dependency on ide_generic for these drivers so update\n ide/Kconfig accordingly.\n\nv2:\n* ide_arm build fix (s/ide_device_idx/ide_device_add/)\n (Thanks to Christoph Lameter \u003cclameter@sgi.com\u003e for reporting the problem).\n\nCc: Mikael Starvik \u003cstarvik@axis.com\u003e\nCc: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nCc: Roman Zippel \u003czippel@linux-m68k.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "944000921d41c5aacfda6515ad3a0bbde52f8fa3", "tree": "a2f814052f6a310fb9f36d80c2905c2838f0d275", "parents": [ "cbb010c180294a5242a7681555c28737d9dd26ab" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:06 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:06 2008 +0100" }, "message": "ide: move ide_arm_init() call from init_ide_data() to ide_init()\n\n* Remove ide_init_port_data() call from ide_arm_init() and move\n ide_arm_init() call from init_ide_data() to ide_init().\n\nThis patch is a preparation for the future changes (and as a side-effect\nmakes obsolete \"idex\u003dio[,ctl[,irq]]\" kernel parameters work for ide_arm).\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "cbb010c180294a5242a7681555c28737d9dd26ab", "tree": "073883d1dc672bb38021563ca0d9cd762cd5abf2", "parents": [ "57c802e84f9c759c3d1794a9dbe81bc10444df62" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:06 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:06 2008 +0100" }, "message": "ide: drop \u0027initializing\u0027 argument from ide_register_hw()\n\n* Rename init_hwif_data() to ide_init_port_data() and export it.\n\n* For all users of ide_register_hw() with \u0027initializing\u0027 argument set\n hwif-\u003epresent and hwif-\u003ehold are always zero so convert these host\n drivers to use ide_find_port()+ide_init_port_data()+ide_init_port_hw()\n instead (also no need for init_hwif_default() call since the setup\n done by it gets over-ridden by ide_init_port_hw() call).\n\n* Drop \u0027initializing\u0027 argument from ide_register_hw().\n\nCc: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nCc: Roman Zippel \u003czippel@linux-m68k.org\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "57c802e84f9c759c3d1794a9dbe81bc10444df62", "tree": "e8774704b3394b12efbb787022cc11b48a13dec0", "parents": [ "8f8e8483f667d79739007b25f0e59a540fb9fa51" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:05 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:05 2008 +0100" }, "message": "ide: add ide_init_port_hw() helper\n\n* Add ide_init_port_hw() helper.\n\n* rapide.c: convert rapide_locate_hwif() to rapide_setup_ports()\n and use ide_init_port_hw().\n\n* ide_platform.c: convert plat_ide_locate_hwif() to plat_ide_setup_ports()\n and use ide_init_port_hw().\n\n* sgiioc4.c: use ide_init_port_hw().\n\n* pmac.c: add \u0027hw_regs_t *hw\u0027 argument to pmac_ide_setup_device(),\n setup \u0027hw\u0027 in pmac_ide_{macio,pci}_attach() and use ide_init_port_hw()\n in pmac_ide_setup_device().\n\nThis patch is a preparation for the future changes in the IDE probing code.\n\nThere should be no functionality changes caused by this patch.\n\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nCc: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nCc: Jeremy Higdon \u003cjeremy@sgi.com\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "795d74b51a853e1f5f2c81baf6666836a3866f08", "tree": "85e83e27ea864be51959774f8a3a00dae814a5e6", "parents": [ "f01393e48c44e30f7c9a36c8b98a07b0232580fe" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "message": "ide: don\u0027t try to unregister interfaces if \u0027initializing\u0027 in ide_register_hw()\n\nHost drivers using ide_register_hw() and \u0027initializing \u003d\u003d 1\u0027:\n\n* ide-pnp\n - depends on ISA\n\n* ide_arm \n - ARM arch specific\n - initialized before all other host drivers\n\n* ide-cris\n - CRIS arch specific \u003d\u003e IDE_ARCH_OBSOLETE_INIT is not defined\n - broken\n\n* ide-h8300\n - H8300 arch specific \u003d\u003e IDE_ARCH_OBSOLETE_INIT is not defined, no PCI\n\n* buddha/q40/gayle/macide/falconide\n - M68K arch specific \u003d\u003e IDE_ARCH_OBSOLETE_INIT is not defined, no PCI\n\nSince the only host drivers which probe interfaces before the above ones are:\n\n* ali14xx/dtc2278/ht6560b/qd65xx/umc8672\n - depend on ISA\n - require IDE_ARCH_OBSOLETE_INIT\u003dy to work\n\n* PCI ones\n - depend on PCI\n\ndon\u0027t try to unregister interfaces if \u0027initializing \u003d\u003d 1\u0027 in ide_register_hw()\n(it is possible that built-in host drivers will claim all IDE interfaces but\nlater ide-pnp host driver will try to unregister them - this change fixes it).\n\nAlso skip hwif-\u003ehold check if \u0027initializing \u003d\u003d 1\u0027 since it is set only by:\n\n* pmac\n - PPC \u0026\u0026 PMAC specific \u003d\u003e no ISA\n\n* au1xxx-ide\n - MIPS \u0026\u0026 SOC_AU1200 specific \u003d\u003e no ISA\n\nand use ide_find_port() helper to find free ide_hwifs[] slot.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f01393e48c44e30f7c9a36c8b98a07b0232580fe", "tree": "d585310ef7ee6509285a96b849af2e544e5fea25", "parents": [ "6dd9b8376adbee95ddc321cc83c7f641577e01f6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "message": "ide: merge -\u003efixup and -\u003equirkproc methods\n\n* Assign drive-\u003equirk_list in -\u003equirkproc implementations:\n - hpt366.c::hpt3xx_quirkproc()\n - pdc202xx_new.c::pdcnew_quirkproc()\n - pdc202xx_old.c::pdc202xx_quirkproc()\n\n* Make -\u003equirkproc void.\n\n* Move calling -\u003equirkproc from do_identify() to probe_hwif().\n\n* Convert it821x_fixups() to it821x_quirkproc() in it821x.c.\n\n* Convert siimage_fixup() to sil_quirkproc() in siimage.c, also remove\n no longer needed drive-\u003epresent check from is_dev_seagate_sata().\n\n* Convert ide_undecoded_slave() to accept \u0027drive\u0027 instead of \u0027hwif\u0027\n as an argument. Then convert ide_register_hw() to accept \u0027quirkproc\u0027\n argument instead of \u0027fixup\u0027 one.\n\n* Remove no longer needed -\u003efixup method.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "15ce926ada545cb078711bd9a18c083c93fa01d7", "tree": "9496cda87cae6ef3390c5f350741ad75418dfe8d", "parents": [ "f37aaf9edeba3f4ae10d22aefc09c06af9ea39b6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:03 2008 +0100" }, "message": "ide: merge -\u003edma_host_{on,off} methods into -\u003edma_host_set method\n\nMerge -\u003edma_host_{on,off} methods into -\u003edma_host_set method\nwhich takes \u0027int on\u0027 argument.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4a546e046d562bcd389149591fa5a534c8f832ca", "tree": "ffc5c7bd088a0bf74744721b9cfcf18220a75fdf", "parents": [ "378f577f7f75aa18a0eeafb044a491dcd5aeaa3d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:01 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 26 20:13:01 2008 +0100" }, "message": "ide: remove -\u003eide_dma_on and -\u003edma_off_quietly methods from ide_hwif_t\n\n* Make ide_dma_off_quietly() and __ide_dma_on() always available.\n\n* Drop \"__\" prefix from __ide_dma_on().\n\n* Check for presence of -\u003edma_host_on instead of -\u003eide_dma_on.\n\n* Convert all users of -\u003eide_dma_on and -\u003edma_off_quietly methods\n to use ide_dma_on() and ide_dma_off_quietly() instead.\n\n* Remove no longer needed -\u003eide_dma_on and -\u003edma_off_quietly methods\n from ide_hwif_t.\n\n* Make ide_dma_on() void.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "7b905994ce0bd332afc5ebc30ce9afa60d23c6e2", "tree": "4f0f25616d816087e0022dce95f996c99c8dcc6e", "parents": [ "23b1bd459c9e8a925381960f0b69ac85468c3af1" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:19 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:19 2008 +0100" }, "message": "ide: cleanup ide_set_dma()\n\n* -\u003edma_off_quietly is always called before ide_set_dma()\n so the call can be moved inside ide_set_dma().\n\n* ide_dma_check() doesn\u0027t touch hardware so -\u003edma_off_quietly\n call for \u0027rc \u003d\u003d -1\u0027 case is redundant, remove it.\n\n* \u00270\u0027 and \u0027-1\u0027 are the only values returned by ide_dma_check()\n so remove dead code for other cases.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "23b1bd459c9e8a925381960f0b69ac85468c3af1", "tree": "6bef66f5615334435a3fdc2fd1c617b79e609288", "parents": [ "4eed504d140319d6c1c7e0a5b7a9bf41dabf7cea" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:19 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:19 2008 +0100" }, "message": "ide: remove redundant -\u003eide_dma_on call from set_using_dma()\n\nide_set_dma() calls -\u003eide_dma_on method itself and returns zero\nonly if -\u003eide_dma_on call succeeded.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "7299a3918442dc9a5abb71b9f65b1dd17637c8c0", "tree": "50ace6bed3d1cc73a184270743d5c5d46ab4f2c7", "parents": [ "f919790f8c929ab1b392ad1a0c2e1b53337b5071" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:14 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:14 2008 +0100" }, "message": "ide: remove hwif-\u003eintrproc\n\nGiven that:\n\n* hpt366.c::hpt3xx_intrproc() is the only user of hwif-\u003eintrproc\n\n* hpt366.c::hpt3xx_quirkproc() sets drive-\u003equirk_list to 1 for quirky drives\n which is a value unique to hpt366 host driver\n\nwe can remove hwif-\u003eintproc and just check for drive-\u003equirk_list \u003d\u003d 1\nin ide_do_request().\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1c029fd658baa2442e8e51dc9c819301cad95777", "tree": "fbbfe6bb774001c9346ea0f772e5f4b0d469b989", "parents": [ "866664d79f6a920af07e6503f64366f4c5b2d41f" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:05 2008 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jan 25 22:17:05 2008 +0100" }, "message": "ide: remove -\u003edma_master field from ide_hwif_t (take 5)\n\n* Convert cmd64x, hpt366 and pdc202xx_old host drivers to use\n pci_resource_start(hwif-\u003epci_dev, 4) instead of hwif-\u003edma_master.\n\n* Remove no longer needed -\u003edma_master field from ide_hwif_t.\n\nv2:\n* Use the more readable \u0027hwif-\u003edma_base - (hwif-\u003echannel * 8)\u0027 instead of\n pci_resource_start(hwif-\u003epci_dev, 4).\n\nv3:\n* Use hwif-\u003eextra_base in hpt366/pdc20xx_old + some cosmetic fixups over v2\n (suggested by Sergei).\n\nv4:\n* Correct offsets in hpt3xxn_set_clock().\n\nv5:\n* Use hwif-\u003eextra_base in hpt366 for _real_ this time. (Noticed by Sergei)\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "644a9d764b4747af057b3db73ccba28a168b1f4f", "tree": "0f692a2e67433b4072856f38a489e0d6fe3c2338", "parents": [ "bbe4d6d86565bfd9edbc3f19bc23f816af66240d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Dec 12 23:32:00 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Dec 12 23:32:00 2007 +0100" }, "message": "ide: fix -\u003eio_32bit race in set_io_32bit()\n\nset_io_32bit() (ide_procset_t function) can race against running\nPIO transfers. Fix it by using ide_spin_wait_hwgroup().\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "e11b9035a47da66fcd4bafd3a5f6b14f51ca667e", "tree": "060ba965247b2c3f31ec2873a9669cadb31d9ac8", "parents": [ "1b7d3477a7b0d52406d68b01bc8931f43112677f" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Dec 12 23:31:58 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Dec 12 23:31:58 2007 +0100" }, "message": "ide: add /sys/bus/ide/devices/*/{model,firmware,serial} sysfs entries\n\nCc: Dan Kegel \u003cdank@kegel.com\u003e\nCc: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\nCc: Xavier Bestel \u003cxavier.bestel@free.fr\u003e\nCc: Andrey Borzenkov \u003carvidjaar@mail.ru\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9239b333939dd1e5b1a9f033a1c136273d58efe8", "tree": "c7eb49e04a549ea709cd98ddf6df66a091a062d6", "parents": [ "18e181fe13b7340194d09e6dd7f571a5f96f0367" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:33 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:33 2007 +0200" }, "message": "ide: remove write-only hwif-\u003ehw\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "18e181fe13b7340194d09e6dd7f571a5f96f0367", "tree": "be2a8ab3e86f297f27249225f7c27bde372c8d0e", "parents": [ "86f3a492bb09eee5745b93af35f2212179c251fd" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:32 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:32 2007 +0200" }, "message": "ide: add hwif-\u003eack_intr hook\n\n* Add hwif-\u003eack_intr hook and use it instead of hwif-\u003ehw.ack_intr.\n\n* Add missing brackets to cris-v32 and powerpc ide_ack_intr() macros.\n\nCc: Roman Zippel \u003czippel@linux-m68k.org\u003e\nCc: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "86f3a492bb09eee5745b93af35f2212179c251fd", "tree": "45d0f4725943fe0d0f16d44db3e643ce1f4d4553", "parents": [ "8f173b5bf460a85791c131e774dc992f8cd578c1" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:32 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:32 2007 +0200" }, "message": "icside: use ec-\u003edma directly\n\n* hwif-\u003ehwif_data contains pointer to struct expansion_card so use ec-\u003edma\n directly instead of caching it in hwif-\u003ehw.dma.\n\n* Remove no longer needed hw_regs_t.dma and NO_DMA define.\n\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8f173b5bf460a85791c131e774dc992f8cd578c1", "tree": "a33a7357bf5b0987cb7e0cbb2250eca4b3281e75", "parents": [ "847ddd2bbe15c6e452606503b5d073826aaaddb7" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:32 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:32 2007 +0200" }, "message": "ide: fix ide_register_hw() to check hwif-\u003eio_ports[]\n\nhwif-\u003ehw.io_ports[] and hwif-\u003eio_ports[] should be the same but \"4drives\"\nsupport and scc_pata host driver set only hwif-\u003eio_ports[].\n\nTo compensate for this check hwif-\u003eio_ports[] instead of hwif-\u003ehw.io_ports[]\nin ide_register_hw() (instead of fixing \"4drives\" and scc_pata because hwif-\u003ehw\nis to be removed).\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "baa8f3e94bc7a7ba3650d80b67d54c3e08365dee", "tree": "caabf63904cd62f758535e16dcc4676ba3ae5095", "parents": [ "8447d9d52adbe4c653482bd0d5ccb9b5d26f9c9d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:31 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:31 2007 +0200" }, "message": "ide: add ide_find_port() helper\n\n* Add ide_find_port() helper.\n\n* Convert icside, rapide and ide_platform host drivers to use it.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8447d9d52adbe4c653482bd0d5ccb9b5d26f9c9d", "tree": "358aa3ca6b0657623b84e7c6278f90fc95a32879", "parents": [ "fd9bb53942a7ca3398a63f2c238afd8fbed3ec0e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:31 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:31 2007 +0200" }, "message": "ide: add ide_device_add()\n\n* Add ide_device_add() helper and convert host drivers to use it\n instead of open-coded variants.\n\n* Make ide_pci_setup_ports() and do_ide_setup_pci_device()\n take \u0027u8 *idx\u0027 argument instead of \u0027ata_index_t *index\u0027.\n\n* Remove no longer needed ata_index_t.\n\n* Unexport probe_hwif_init() and make it static.\n\n* Unexport ide_proc_register_port().\n\nThere should be no functionality changes caused by this patch\n(sgiioc4.c: ide_proc_register_port() requires hwif-\u003epresent\n to be set and it won\u0027t be set if probe_hwif_init() fails).\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "fd9bb53942a7ca3398a63f2c238afd8fbed3ec0e", "tree": "eab9592f5bcbee89e0fdf9661e40a92d629d0a32", "parents": [ "438c470261036db25bfae15235ba99812e3dc763" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:31 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 20 00:32:31 2007 +0200" }, "message": "ide: add -\u003efixup method to ide_hwif_t\n\n* Add -\u003efixup method to ide_hwif_t.\n\n* Set hwif-\u003efixup in ide_pci_setup_ports() to d-\u003efixup.\n\n* Use hwif-\u003efixup in probe_hwif().\n\n* Use probe_hwif_init() instead of probe_hwif_init_with_fixup() in\n ide_setup_pci_device().\n\n* Add \u0027fixup\u0027 argument to ide_register_hw() and use it to set hwif-\u003efixup,\n update all ide_register_hw() users accordingly.\n\n* Convert ide-cs/delkin_cb host drivers to use ide_register_hw().\n\n* Restore hwif-\u003efixup in ide_hwif_restore().\n\n* Remove ide_register_hw_with_fixup(), probe_hwif_init_with_fixup()\n and \u0027fixup\u0027 argument from probe_hwif().\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "238e4f142c33bb34440cc64029dde7b9fbc4e65f", "tree": "5fc96f650cf6d326a4bc1e0026cd8ddeb9b9aa94", "parents": [ "9ffcf364f9d0aca3ea79e9987c368eb75925460e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 19 00:30:07 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 19 00:30:07 2007 +0200" }, "message": "ide: add IDE_HFLAG_NO_LBA48 and IDE_HFLAG_NO_LBA48_DMA host flags\n\nAdd IDE_HFLAG_NO_LBA48[_DMA] host flags, use it instead of hwif-\u003eno_lba48[_dma]\nand then remove no longer needed hwif-\u003eno_lba48[_dma]. As a side-effect\nthis change fixes hwif-\u003eno_lba48_dma not being restored by ide_hwif_restore().\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "33c1002ed912ac9dacedd5d5b166da3b72d18460", "tree": "c129987c6935542a8bd95924873ac6bf0e1e756c", "parents": [ "1c3dd326ad790934fd88ec086e75a9d61ddaef8a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 19 00:30:06 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Oct 19 00:30:06 2007 +0200" }, "message": "ide: add IDE_HFLAG_NO_ATAPI_DMA host flag\n\nAdd IDE_HFLAG_NO_ATAPI_DMA host flag and set it in host drivers which\ndon\u0027t support ATAPI DMA. Then remove no longer needed hwif-\u003eatapi_dma.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c223701cf6c706f42840631c1ca919a18e6e2800", "tree": "0ae93a4a36e874d5e1378e5e2d032a81e71350f7", "parents": [ "9ff6f72f432364991d68e99cae72cb141c166e70" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:58 2007 +0200" }, "message": "ide: add \"hdx\u003dnodma\" kernel parameter\n\n* Add \"hdx\u003dnodma\" option allowing user to disallow DMA for a given device.\n\n* Obsolete \"ide\u003dnodma\" option.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9ff6f72f432364991d68e99cae72cb141c166e70", "tree": "e37e5dc6d1b2387f7cbc2909d5cb534d4a395a79", "parents": [ "1b5169405e50b98b2bd1e4f86c7706ea24a59193" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:58 2007 +0200" }, "message": "ide: remove hwif-\u003eautodma and drive-\u003eautodma\n\n* hpt34x.c: disable DMA masks for HPT345\n (hwif-\u003eautodma is zero so DMA won\u0027t be enabled anyway).\n\n* trm290.c: disable IDE_HFLAG_TRUST_BIOS_FOR_DMA flag\n (hwif-\u003eautodma is zero so DMA won\u0027t be enabled anyway).\n\n* Check noautodma global variable instead of drive-\u003eautodma in ide_tune_dma().\n\n This fixes handling of \"ide\u003dnodma\" kernel parameter for icside, ide-cris,\n au1xxx-ide, pmac, it821x, jmicron, sgiioc4 and siimage host drivers.\n\n* Remove hwif-\u003eautodma (it was not checked by IDE core code anyway) and\n drive-\u003eautodma (was set by all host drivers - except HPT345/TRM290 special\n cases - unless \"ide\u003dnodma\" was used).\n\nWhile at it:\n- remove needless printk() from icside.c\n- remove stale FIXME/comment from ide-probe.c\n- don\u0027t force DMA off if PCI bus-mastering had to be enabled in setup-pci.c\n (this setting was always later over-ridden by host drivers anyway)\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1b5169405e50b98b2bd1e4f86c7706ea24a59193", "tree": "a9bf4bfe1dd7881d2d73d69ef32d5f450a98754a", "parents": [ "c58e79dd44243ec919d789193ffb35a220c54695" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:57 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:57 2007 +0200" }, "message": "ide: remove \"idex\u003ddma\" kernel parameter\n\nIt has been obsoleted since 1 Nov 2004, is valid only when used together with\n\"ide\u003dnodma\" kernel parameter (which makes no sense) and only for aec62xx,\ncmd64x, cs5220, generic, hpt366, sl82c105, tc86c001 and triflex host drivers.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "3135469e1f679b1728fa047ed43b0c63cdf50c84", "tree": "901ed711e5a14e453c1522a23e099662a5d41794", "parents": [ "259c0632d30d75a5a7fccdac558cc128f03ce903" ], "author": { "name": "Adrian Bunk", "email": "bunk@kernel.org", "time": "Tue Oct 16 22:29:55 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:55 2007 +0200" }, "message": "ide: unexport noautodma\n\nnoautodma can now be unexported.\n\nSigned-off-by: Adrian Bunk \u003cbunk@kernel.org\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "0ae2e178652753ae1797d407755a3505f7c1d2a7", "tree": "fa725edcfb4b9752ebf2aa49a3e42e158537d4ed", "parents": [ "b8b739d3361c16773a30fe5c0360336bbc19f435" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:55 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Oct 16 22:29:55 2007 +0200" }, "message": "ide: remove -\u003eide_dma_check (take 2)\n\n* Add IDE_HFLAG_TRUST_BIOS_FOR_DMA host flag for host drivers that depend\n on BIOS for programming device/controller for DMA. Set it in cy82c693,\n generic, ns87415, opti621 and trm290 host drivers.\n\n* Add IDE_HFLAG_VDMA host flag for host drivers using VDMA. Set it in cs5520\n host driver.\n\n* Teach ide_tune_dma() about IDE_HFLAG_TRUST_BIOS_FOR_DMA flag.\n\n* Add generic ide_dma_check() helper and remove all open coded -\u003eide_dma_check\n implementations. Fix all places checking for presence of -\u003eide_dma_check\n hook to check for -\u003eide_dma_on instead.\n\n* Remove no longer needed code from config_drive_for_dma().\n\n* Make ide_tune_dma() static.\n\nv2:\n* Fix config_drive_for_dma() return values.\n\n* Fix ide-dma.c build for CONFIG_BLK_DEV_IDEDMA_PCI\u003dn by adding\n dummy config_drive_for_dma() inline.\n\n* Fix IDE_HFLAG_TRUST_BIOS_FOR_DMA handling in ide_dma_check().\n\n* Fix init_hwif_it8213() comment.\n\nThere should be no functionality changes caused by this patch.\n\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "88b2b32babd46cd54d2de4d17eb869aea3383e11", "tree": "d446864f7c3431f8c428eecacd11caf7b794f018", "parents": [ "6e249395eace037ef139a1c8996b31e3797e412a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:51 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Oct 13 17:47:51 2007 +0200" }, "message": "ide: move ide_config_drive_speed() calls to upper layers (take 2)\n\n* Convert {ide_hwif_t,ide_pci_device_t}-\u003ehost_flag to be u16.\n\n* Add IDE_HFLAG_POST_SET_MODE host flag to indicate the need to program \n the host for the transfer mode after programming the device. Set it\n in au1xxx-ide, amd74xx, cs5530, cs5535, pdc202xx_new, sc1200, pmac\n and via82cxxx host drivers.\n\n* Add IDE_HFLAG_NO_SET_MODE host flag to indicate the need to completely\n skip programming of host/device for the transfer mode (\"smart\" hosts).\n Set it in it821x host driver and check it in ide_tune_dma().\n\n* Add ide_set_pio_mode()/ide_set_dma_mode() helpers and convert all\n direct -\u003eset_pio_mode/-\u003espeedproc users to use these helpers.\n\n* Move ide_config_drive_speed() calls from -\u003eset_pio_mode/-\u003espeedproc\n methods to callers.\n\n* Rename -\u003espeedproc method to -\u003eset_dma_mode, make it void and update\n all implementations accordingly.\n\n* Update ide_set_xfer_rate() comments.\n\n* Unexport ide_config_drive_speed().\n\nv2:\n* Fix issues noticed by Sergei:\n - export ide_set_dma_mode() instead of moving -\u003eset_pio_mode abuse wrt\n to setting DMA modes from sc1200_set_pio_mode() to do_special()\n - check IDE_HFLAG_NO_SET_MODE in ide_tune_dma()\n - check for (hwif-\u003eset_pio_mode) \u003d\u003d NULL in ide_set_pio_mode()\n - check for (hwif-\u003eset_dma_mode) \u003d\u003d NULL in ide_set_dma_mode()\n - return -1 from ide_set_{pio,dma}_mode() if -\u003eset_{pio,dma}_mode \u003d\u003d NULL\n - don\u0027t set -\u003eset_{pio,dma}_mode on it821x in \"smart\" mode\n - fix build problem in pmac.c\n - minor fixes in au1xxx-ide.c/cs5530.c/siimage.c\n - improve patch description\n\nChanges in behavior caused by this patch:\n- HDIO_SET_PIO_MODE ioctl would now return -ENOSYS for attempts to change\n PIO mode if it821x controller is in \"smart\" mode\n- removal of two debugging printk-s (from cs5530.c and sc1200.c)\n- transfer modes 0x00-0x07 passed from user space may be programmed twice on\n the device (not really an issue since 0x00 is not supported correctly by\n any host driver ATM, 0x01 is not supported at all and 0x02-0x07 are invalid)\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "7eff2e7a8b65c25920207324e56611150eb1cd9a", "tree": "02a0eeba9d25d996233e30c18f258dfae0ae2139", "parents": [ "8380770c842faef3001e44662953d64ad9a93663" ], "author": { "name": "Kay Sievers", "email": "kay.sievers@vrfy.org", "time": "Tue Aug 14 15:15:12 2007 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Oct 12 14:51:01 2007 -0700" }, "message": "Driver core: change add_uevent_var to use a struct\n\nThis changes the uevent buffer functions to use a struct instead of a\nlong list of parameters. It does no longer require the caller to do the\nproper buffer termination and size accounting, which is currently wrong\nin some places. It fixes a known bug where parts of the uevent\nenvironment are overwritten because of wrong index calculations.\n\nMany thanks to Mathieu Desnoyers for finding bugs and improving the\nerror handling.\n\nSigned-off-by: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\nCc: Mathieu Desnoyers \u003cmathieu.desnoyers@polymtl.ca\u003e\nCc: Cornelia Huck \u003ccornelia.huck@de.ibm.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n\n" }, { "commit": "26bcb879c03254545a19c6700fe5bcef6f21e7b1", "tree": "dc35f1a7d7860fe0de268ff92189ff0884b689d3", "parents": [ "842c19ad6fc0dbd9ac9d2f8527466201802934cf" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:54:00 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:54:00 2007 +0200" }, "message": "ide: add ide_set{_max}_pio() (take 4)\n\n* Add IDE_HFLAG_ABUSE_{PREFETCH,FAST_DEVSEL,DMA_MODES} flags\n and set them in ht6560, cmd640, cmd64x and sc1200 host drivers.\n\n* Add set_pio_mode_abuse() for checking if host driver has a non-standard\n -\u003etuneproc() implementation and use it in do_special().\n\n* Add ide_set_pio() for setting PIO mode (it uses hwif-\u003epio_mask to find\n the maximum PIO mode supported by the host), also add ide_set_max_pio()\n wrapper for ide_set_pio() to use for auto-tuning. Convert users of\n -\u003etuneproc to use ide_set{_max}_pio() where possible. This leaves only\n do_special(), set_using_pio(), ide_hwif_restore() and ide_set_pio() as\n a direct users of -\u003etuneproc.\n\n* Remove no longer needed ide_get_best_pio_mode() calls and printk-s\n reporting PIO mode selected from -\u003etuneproc implementations.\n\n* Rename -\u003etuneproc hook to -\u003eset_pio_mode and make \u0027pio\u0027 argument const.\n\n* Remove stale comment from ide_config_drive_speed().\n\nv2:\n* Fix \"ata_\" prefix (Noticed by Jeff).\n\nv3:\n* Minor cleanups/fixups per Sergei\u0027s suggestions.\n\nv4:\n* Fix compile problem in drivers/ide/pci/cmd640.c\n (Noticed by Andrew Morton).\n\n* Improve some -\u003eset_pio_mode comments.\n\nReviewed-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "5e32132befa5d2cefadf3141fee0bbb40cd11f0e", "tree": "7bf2002e49b169d24b87a8fe71364875e04d1e90", "parents": [ "8cb1f567f4c0a2fde9cbf77c2af888a28cab3423" ], "author": { "name": "Shaohua Li", "email": "shaohua.li@intel.com", "time": "Thu Oct 11 23:53:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:53:58 2007 +0200" }, "message": "ide: hook ACPI _PSx method to IDE power on/off\n\nACPI spec defines the sequence of IDE power on/off:\nPowering down:\n\tCall _GTM.\n\tPower down drive (calls _PS3 method and turns off power planes).\nPowering up:\n\tPower up drive (calls _PS0 method if present and turns on power planes).\n\tCall _STM passing info from _GTM (possibly modified), with ID data from\n\teach drive.\n\tInitialize the channel.\n\tMay modify the results of _GTF.\n\tFor each drive:\n\t\tCall _GTF.\n\t\tExecute task file (possibly modified).\nThis patch adds the missed _PS0/_PS3 methods call.\n\nSigned-off-by: Shaohua Li \u003cshaohua.li@intel.com\u003e\nAcked-by: Len Brown \u003clen.brown@intel.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b4e44369a380c1836d0983c2a5011099b7b26eb1", "tree": "c7be9a68f98d908c7822d65dcec4b3c21d9d7955", "parents": [ "7cfa7168f7a7730abf1aa2af4a7596d24edd4c21" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Thu Oct 11 23:53:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:53:58 2007 +0200" }, "message": "hpt366: MWDMA filter for SATA cards (take 2)\n\nThe Marvell bridge chips used on HighPoint SATA cards do not seem to support\nthe MWDMA modes (at least that could be seen in their so-called drivers :-),\nso the driver needs to account for this -- to achieve this:\n\n- add mdma_filter() method from the original patch by Bartlomiej Zolnierkiewicz\n with his consent;\n\n- install the method for all chips to only return empty mask if a SATA drive\n is detected on HPT372{AN]/374 chips...\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "89636af25d75d8672aea05d258be357d0dc4bd70", "tree": "dc1960bb144f76c75e82928ed3d601b52a275999", "parents": [ "4bf9fdf7f21f118e2c5052ec8e46faf00eb5a4ea" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "message": "ide: add support for SCSI ioctls to ide-floppy\n\nNow that ide-floppy supports SG_IO we can add support for SCSI ioctls\n(except deprecated SCSI_IOCTL_SEND_COMMAND and legacy CDROM_SEND_PACKET\nones - we can add them later iff really needed).\n\nWhile at it remove handling of CDROMEJECT and CDROMCLOSETRAY ioctls from\ngeneric_ide_ioctl():\n\n- This prevents ide-{disk,tape,scsi} device drivers from obtaining\n REQ_TYPE_BLOCK_PC type requests which are currently unsupported by\n these drivers and which are potentially harmful (as reported by Andrew).\n\n- There is no functionality loss since aforementioned ioctls will now be\n handled by idefloppy_ioctl()-\u003escsi_cmd_ioctl() (for devices using\n ide-floppy driver) and by idecd_ioctl-\u003ecdrom_ioctl()-\u003escsi_cmd_ioctl()\n (for devices using ide-cd driver).\n\nCc: Jens Axboe \u003cjens.axboe@oracle.com\u003e\nCc: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nCc: James Bottomley \u003cJames.Bottomley@steeleye.com\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "74565073cbf6b3c1746ee623e97b2ba0fcd3fbb6", "tree": "8259a8e42a668e12e5e348a24945e5818583226e", "parents": [ "d281e9ad87f79fd01ce1fc2d2f258e2ee765bc5a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "message": "ide: remove stale changelog/comments/TODO from ide.c\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4099d14322149c7a467e4997b87be4ba8eb78697", "tree": "133a913d7f9c2dacaaaef5cfdf2ae6911dc21f4c", "parents": [ "6a824c92db4d606c324272c4eed366fb71672440" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "message": "ide: add PIO masks\n\n* Add ATA_PIO[0-6] defines to \u003clinux/ata.h\u003e.\n\n* Add -\u003epio_mask field to ide_pci_device_t and ide_hwif_t.\n\n* Add PIO masks to host drivers.\n\n\u003clinux/ata.h\u003e change ACK-ed by Jeff Garzik \u003cjeff@garzik.org\u003e.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6a824c92db4d606c324272c4eed366fb71672440", "tree": "72b398062fd582b85507b665120f0a5315548eaf", "parents": [ "2134758d2a5429325cee4d4ce8959af5314eeba1" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:58 2007 +0200" }, "message": "ide: remove ide_find_best_pio_mode()\n\n* Add -\u003ehost_flags to ide_hwif_t to store ide_pci_device_t.host_flags,\n assign it in setup-pci.c:ide_pci_setup_ports().\n\n* Add IDE_HFLAG_PIO_NO_{BLACKLIST,DOWNGRADE} to ide_pci_device_t.host_flags\n and teach ide_get_best_pio_mode() about them. Also remove needless\n !drive-\u003eid check while at it (drive-\u003eid is always present).\n\n* Convert amd74xx, via82cxxx and ide-timing.h to use ide_get_best_pio_mode()\n and then remove no longer needed ide_find_best_pio_mode().\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1985026d32e69ed6dac3ba0ef8ff10366f060ed3", "tree": "a355fde028462c4d6ae6cad9090011a73cb566a7", "parents": [ "8b0d4164b4ac151050953d78c97fcceade69eb3c" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue Jul 17 15:57:42 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue Jul 17 15:57:42 2007 -0700" }, "message": "Revert drivers/ide/ide.c scsi_cmd_ioctl() usage changes\n\nThe old IDE driver is not ready to take generic SCSI commands, even if\nit uses them for some specific issues (ie the tray open/close ioctls for\nIDE CD-ROM\u0027s). Pointed out by Bartlomiej.\n\nI\u0027m sure we\u0027ll have it fixed properly soon enough, but for now we should\nnot allow it to cause problems.\n\nCc: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nCc: Jens Axboe \u003cjens.axboe@oracle.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "45e79a3acdcf54113b3d7b23e9e64e6541dbfeb5", "tree": "b8e7598b26ce446577e162189e635f6b87b10a5b", "parents": [ "7e75d73080d822d2bbbd5b0f7f293719dd1f9109" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Mon Jul 09 12:39:20 2007 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Mon Jul 16 08:52:45 2007 +0200" }, "message": "bsg: add a request_queue argument to scsi_cmd_ioctl()\n\nbsg uses scsi_cmd_ioctl() for some SCSI/sg ioctl\ncommands. scsi_cmd_ioctl() gets a request queue from a gendisk\narguement. This prevents bsg being bound to SCSI devices that don\u0027t\nhave a gendisk (like OSD). This adds a request_queue argument to\nscsi_cmd_ioctl(). The SCSI/sg ioctl commands doesn\u0027t use a gendisk so\nit\u0027s safe for any SCSI devices to use scsi_cmd_ioctl().\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "3d6392cfbd7dc11f23058e3493683afab4ac13a3", "tree": "70c2b65c479f5feb7a5214a4a4930d489a069b1f", "parents": [ "8f41958bdd577731f7411c9605cfaa9db6766809" ], "author": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Mon Jul 09 12:38:05 2007 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Mon Jul 16 08:52:44 2007 +0200" }, "message": "bsg: support for full generic block layer SG v3\n\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "49521f97ccd3c2bf6e71a91cea8fe65d170fa4fb", "tree": "f61c34da6092f2f1a97a78da567afc59ad40850b", "parents": [ "75b1d97535327d0428c6bffd9d5407e65546fd5d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "message": "ide: add short cables support\n\nThis patch allows users to override both host and device side cable detection\nwith \"ideX\u003data66\" kernel parameter. Thanks to this it should be now possible\nto use UDMA \u003e 2 modes on systems (laptops mainly) which use short 40-pin cable\ninstead of 80-pin one.\n\nNext patches add automatic detection of some systems using short cables.\n\nChanges:\n\n* Rename hwif-\u003eudma_four to hwif-\u003ecbl and make it u8.\n\n* Convert all existing users accordingly (use ATA_CBL_* defines while at it). \n\n* Add ATA_CBL_PATA40_SHORT support to ide-iops.c:eighty_ninty_three().\n\n* Use ATA_CBL_PATA40_SHORT for \"ideX\u003data66\" kernel parameter.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nReviewed-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\n" }, { "commit": "f9383c4269d264c3cf563bd2de365891f6592ebd", "tree": "7f1f3525c51237dc5806d17dd2c68c19d47a493b", "parents": [ "1b9da32a2855afa3c5f27690e03a33dc97410c42" ], "author": { "name": "Matthias Kaehlcke", "email": "matthias.kaehlcke@gmail.com", "time": "Mon Jul 09 23:17:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:56 2007 +0200" }, "message": "ide: use mutex instead of ide_setting_sem semaphore in IDE driver\n\nThe IDE driver uses a semaphore as mutex.\nUse the mutex API instead of the (binary) semaphore.\n\nSigned-off-by: Matthias Kaehlcke \u003cmatthias.kaehlcke@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n--\n\n" }, { "commit": "ef29888ea8e1fdc499e995260195b66fc91d2728", "tree": "aa042c07a63de5bf4147ab819f89724ad9838877", "parents": [ "c283f5dbe31920ca70b80a594a97bfaa2a28be13" ], "author": { "name": "Matthias Kaehlcke", "email": "matthias.kaehlcke@gmail.com", "time": "Mon Jul 09 23:17:55 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:55 2007 +0200" }, "message": "ide: use mutex instead of ide_cfg_sem semaphore in IDE driver\n\nThe IDE driver uses a semaphore as mutex.\nUse the mutex API instead of the (binary) semaphore.\n\nSigned-off-by: Matthias Kaehlcke \u003cmatthias.kaehlcke@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c283f5dbe31920ca70b80a594a97bfaa2a28be13", "tree": "891268bfec27d88bb9c5773026dcf950afe063d9", "parents": [ "841d2a9bf16471716ba3a5172d24aa40a2ea9398" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Mon Jul 09 23:17:54 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:54 2007 +0200" }, "message": "ide: make void and rename ide_dma_timeout() method\n\nSince ide_dma_timeout() method\u0027s result is discarded, make it return \u0027void\u0027.\nWhile at it, drop \u0027ide_\u0027 from the method\u0027s name, drop the \u0027__\u0027 prefix from\nthe default method\u0027s name, and do some cleanups in this method driver-wise:\n\n- in ide-dma.c, au1xxx-ide.c, and pdc202xx_old.c, define/use \u0027hwif\u0027 variable;\n\n- in au1xxx-ide.c, get rid of commented out printk();\n\n- in sl82c105.c, get rid of unnecessary variables.\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "841d2a9bf16471716ba3a5172d24aa40a2ea9398", "tree": "f836d41ed70bf3efd6350c293c0c31a40ef4f900", "parents": [ "b740d8846e2e184909e9f74d4ad9d67ae0e084ea" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Mon Jul 09 23:17:54 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:54 2007 +0200" }, "message": "ide: make void and rename ide_dma_lostirq() method\n\nSince ide_dma_lostirq() method\u0027s result is discarded, make it return \u0027void\u0027.\nWhile at it, rename the method to dma_lost_irq(), drop the \u0027__\u0027 prefix from the\ndefault method\u0027s name, and do some cleanups in this method driver-wise:\n\n- in aec62xx.c, rename the method in accordance with other drivers, and get rid\n of unnecessary variables there;\n\n- in pdc202xx_old.c, define/use \u0027hwif\u0027 variable;\n\n- in sgiioc4.c, rearrange the code to call the resetproc() method directly.\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ce9b2b0abbf019d5259eb089a1cc256852930f67", "tree": "c60d73f008d1c70002bef6b35901e4105269bc12", "parents": [ "d09c6b809432668371b5de9102f4f9aa6a7c79cc" ], "author": { "name": "Rafael J. Wysocki", "email": "rjw@sisk.pl", "time": "Sat Jun 16 02:24:43 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jun 16 02:24:43 2007 +0200" }, "message": "Resume from RAM on HPC nx6325 broken\n\ngeneric_ide_resume() should check if dev-\u003edriver is not NULL before applying\nto_ide_driver() to it. Fix that.\n\nSigned-off-by: Rafael J. Wysocki \u003crjw@sisk.pl\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "0d2157f78d17fcee17791f54959e67cc0af0da74", "tree": "22782319df55322375f5fe3b8c23d1591e3fbcf0", "parents": [ "0380dad45e4f5a606025cc4df2a2cd26af08796b" ], "author": { "name": "Lee Trager", "email": "lt73@cs.drexel.edu", "time": "Fri Jun 08 15:14:30 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jun 08 15:14:30 2007 +0200" }, "message": "ide: HPA detect from resume\n\nCurrently when system which have HPA require HPA to be detected and\ndisabled upon resume from RAM or disk. The current IDE drivers do not do\nthis nor does libata (obviously it since it doesn\u0027t support HPA yet).\n\nI have implemented this into the current IDE drivers and it has been\ntested by many others since 7/15/2006 in bug number 6840:\n\n\thttp://bugzilla.kernel.org/show_bug.cgi?id\u003d6840\n\nand it has been confirmed to work fine with no problems.\n\nbart: added drv !\u003d NULL check to generic_ide_suspend()\n\nFrom: Lee Trager \u003clt73@cs.drexel.edu\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "793a97228d3da876f42b7fb4d4a52cc8cc86dc81", "tree": "ce76adb97bca7089e8bc96cb774d90fb3e254926", "parents": [ "7f86723a60d287be19aee620277184f9f5455283" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 16 00:51:43 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 16 00:51:43 2007 +0200" }, "message": "ide: always disable DMA before tuning it\n\nide_start_power_step() and set_using_dma() were missing -\u003edma_off_quietly\ncall (comment in probe_hwif() states that DMA should be always cleared before\ntuning is attempted). Fix it.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6d208b39c45edee5def6c201fcd51561c5a39828", "tree": "55645d2b6173e3161d12e5c9efdc4bd052b75b56", "parents": [ "5cbf79cdb37be2aa2a1b4fa94144526b14557060" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:11 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:11 2007 +0200" }, "message": "ide: legacy PCI bus order probing fixes\n\nIDE PCI host drivers should register themselves with IDE core only when\nIDE driver is built-in, otherwise (IDE driver is modular and thus IDE PCI\nhost drivers are also modular) the code has no effect and just complicates\nthe probing.\n\nFix it by adding new config option CONFIG_IDEPCI_PCIBUS (defined only when\nneeded and invisible to the user) and covering by #ifdef/#endif the code\nin question. It turned out that \"ide\u003dreverse\" was silently accepted but did\nnothing in case when IDE driver was modular, this is fixed now.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "5cbf79cdb37be2aa2a1b4fa94144526b14557060", "tree": "1fcfbc1248b9904e5890cc593f018ee0a8a53238", "parents": [ "869c56ee9de1b72cd3f8ab9cdfbd3601e55c61f2" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:11 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:11 2007 +0200" }, "message": "ide: add ide_proc_register_port()\n\n* create_proc_ide_interfaces() tries to add /proc entries for every probed\n and initialized IDE port, replace it by ide_proc_register_port() which does\n it only for the given port (also rename destroy_proc_ide_interface() to\n ide_proc_unregister_port() for consistency)\n \n* convert {create,destroy}_proc_ide_interface[s]() users to use new functions\n\n* pmac driver depended on proc_ide_create() to add /proc port entries, fix it\n \n* au1xxx-ide, swarm and cs5520 drivers depended indirectly on ide-generic\n driver (CONFIG_IDE_GENERIC\u003dy) to add port /proc entries, fix them\n\n* there is now no need to add /proc entries for IDE ports in proc_ide_create()\n so don\u0027t do it\n\n* proc_ide_create() needs now to be called before drivers are probed - fix it,\n while at it make proc_ide_create() create /proc \"ide\" directory\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "869c56ee9de1b72cd3f8ab9cdfbd3601e55c61f2", "tree": "0f295ba89c774f9a20b2b089a29f288cd80b8094", "parents": [ "7f8f48af0861c38c28d4abd550102643e0ea9e6a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "message": "ide: add \"initializing\" argument to ide_register_hw()\n\nAdd \"initializing\" argument to ide_register_hw() and use it instead of ide.c\nwide variable of the same name. Update all users of ide_register_hw()\naccordingly.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "7662d046df09e80680b77b68de896beab45e675e", "tree": "ea2281c59399b3867fb37e1005a0f0e0d2170c5d", "parents": [ "1497943ee692aa7519fa972d0e3a339649bf3a96" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "message": "ide: move IDE settings handling to ide-proc.c\n\n* move\n\t__ide_add_setting()\n\tide_add_setting()\n\t__ide_remove_setting()\n\tauto_remove_settings()\n\tide_find_setting_by_name()\n\tide_read_setting()\n\tide_write_setting()\n\tset_xfer_rate()\n\tide_add_generic_settings()\n\tide_register_subdriver()\n\tide_unregister_subdriver()\n\n from ide.c to ide-proc.c\n\n* set_{io_32bit,pio_mode,using_dma}() cannot be marked static now, fix it\n\n* rename ide_[un]register_subdriver() to ide_proc_[un]register_driver(),\n update device drivers to use new names\n\n* add CONFIG_IDE_PROC_FS\u003dn versions of ide_proc_[un]register_driver()\n and ide_add_generic_settings()\n\n* make ide_find_setting_by_name(), ide_{read,write}_setting()\n and ide_{add,remove}_proc_entries() static\n\n* cover IDE settings code in device drivers with CONFIG_IDE_PROC_FS #ifdef,\n also while at it cover with CONFIG_IDE_PROC_FS #ifdef ide_driver_t.proc\n\n* remove bogus comment from ide.h\n\n* cover with CONFIG_IDE_PROC_FS #ifdef .proc and .settings in ide_drive_t\n\nBesides saner code this patch results in the IDE core smaller by ~2 kB\n(on x86-32) and IDE disk driver by ~1 kB (ditto) when CONFIG_IDE_PROC_FS\u003dn.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1497943ee692aa7519fa972d0e3a339649bf3a96", "tree": "dc70ee9731f66dd323ddb397380b62c0c2977add", "parents": [ "ecfd80e4a514123070b4cfb674b817ba75055df2" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "message": "ide: split off ioctl handling from IDE settings (v2)\n\n* do write permission and min/max checks in ide_procset_t functions\n\n* ide-disk.c: drive-\u003eid is always available so cleanup \"multcount\" setting\n accordingly\n\n* ide-disk.c: \"address\" setting was incorrectly defined as type TYPE_INTA,\n fix it by using type TYPE_BYTE and updating ide_drive_t-\u003eadressing field,\n the bug didn\u0027t trigger because this IDE setting uses custom -\u003eset function\n\n* ide.c: add set_ksettings() for handling HDIO_SET_KEEPSETTINGS ioctl\n\n* ide.c: add set_unmaskirq() for handling HDIO_SET_UNMASKINTR ioctl\n\n* handle ioctls directly in generic_ide_ioclt() and idedisk_ioctl()\n instead of using IDE settings to deal with them\n\n* remove no longer needed ide_find_setting_by_ioctl() and {read,write}_ioctl\n fields from ide_settings_t, also remove now unused TYPE_INTA handling\n\nv2:\n* add missing EXPORT_SYMBOL_GPL(ide_setting_sem) needed now for ide-disk\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ecfd80e4a514123070b4cfb674b817ba75055df2", "tree": "956baa39e22030d139803b7585bd71e91c637bb5", "parents": [ "29e744d088e3555f4efbdf390f01088dd66993b6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:09 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:09 2007 +0200" }, "message": "ide: make /proc/ide/ optional\n\nAll important information/features should be already available through\nsysfs and ioctl interfaces.\n\nAdd CONFIG_IDE_PROC_FS (CONFIG_SCSI_PROC_FS rip-off) config option,\ndisabling it makes IDE driver ~5 kB smaller (on x86-32).\n\nWhile at it add CONFIG_PROC_FS\u003dn versions of proc_ide_{create,destroy}()\nand remove no longer needed #ifdefs.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2d5eaa6dd744a641e75503232a01f52d0768884c", "tree": "0736bd00ea3bd032d601d0a676c998cb043b877a", "parents": [ "18137207236285989dfc0ee7f929b954199228f3" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:08 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:08 2007 +0200" }, "message": "ide: rework the code for selecting the best DMA transfer mode (v3)\n\nDepends on the \"ide: fix UDMA/MWDMA/SWDMA masks\" patch.\n\n* add ide_hwif_t.udma_filter hook for filtering UDMA mask\n (use it in alim15x3, hpt366, siimage and serverworks drivers)\n* add ide_max_dma_mode() for finding best DMA mode for the device\n (loosely based on some older libata-core.c code)\n* convert ide_dma_speed() users to use ide_max_dma_mode()\n* make ide_rate_filter() take \"ide_drive_t *drive\" as an argument instead\n of \"u8 mode\" and teach it to how to use UDMA mask to do filtering\n* use ide_rate_filter() in hpt366 driver\n* remove no longer needed ide_dma_speed() and *_ratemask()\n* unexport eighty_ninty_three()\n\nv2:\n* rename -\u003efilter_udma_mask to -\u003eudma_filter\n [ Suggested by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nv3:\n* updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space\n originated transfer mode change requests when 100MHz clock is used)\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "18137207236285989dfc0ee7f929b954199228f3", "tree": "d55f1287ae64318190e18cb7a64ca514c76c3414", "parents": [ "de372ecd80a42c4fb485c7232475301a18d05184" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:07 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:07 2007 +0200" }, "message": "ide: fix UDMA/MWDMA/SWDMA masks (v3)\n\n* use 0x00 instead of 0x80 to disable -\u003e{ultra,mwdma,swdma}_mask\n* add udma_mask field to ide_pci_device_t and use it to initialize\n -\u003eultra_mask in aec62xx, cmd64x, pdc202xx_{new,old} and piix drivers\n* fix UDMA masks to match with chipset specific *_ratemask()\n (alim15x3, hpt366, serverworks and siimage drivers need UDMA mask\n filtering method - done in the next patch)\n\nv2:\n* piix: fix cable detection for 82801AA_1 and 82372FB_1\n [ Noticed by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n* cmd64x: use hwif-\u003ecds-\u003eudma_mask\n [ Suggested by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n* aec62xx: fix newly introduced bug - check DMA status not command register\n [ Noticed by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nv3:\n* piix: use hwif-\u003ecds-\u003eudma_mask\n [ Suggested by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "a7a832de9e9624bcf069a5369c3c38ba2f44d460", "tree": "3776f380d5031de1e0c6fbe248bba2bbfe1cf5d1", "parents": [ "76ca1af10e28021e1894c5703da42b5e7bff1771" ], "author": { "name": "Danny Kukawka", "email": "dkukawka@suse.de", "time": "Tue Apr 10 22:39:14 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Apr 10 22:39:14 2007 +0200" }, "message": "ide: add \"optical\" to sysfs \"media\" attribute\n\nAdd \"optical\" to sysfs \"media\" attribute as already in /proc\n\nSigned-off-by: Danny Kukawka \u003cdkukawka@suse.de\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8799620400b0b1a4729d8be828b5bfb3d2a8db1a", "tree": "4c5f3bb3360dddcc9638c4e92ddb7f1f2e0b1578", "parents": [ "f68d9320cd06fdec19735143b42e5197b63165b4" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Mar 26 23:03:19 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Mar 26 23:03:19 2007 +0200" }, "message": "ide: fix locking for manual DMA enable/disable (\"hdparm -d\")\n\nSince hwif-\u003eide_dma_check and hwif-\u003eide_dma_on never queue any commands\n(ide_config_drive_speed() sets transfer mode using polling and has no error\nrecovery) we are safe with setting hwgroup-\u003ebusy for the time while DMA\nsetting for a drive is changed (so it won\u0027t race against I/O commands in fly).\n\nI audited briefly all -\u003eide_dma_check/-\u003eide_dma_on/-\u003etuneproc/-\u003espeedproc\nimplementations and they all look OK wrt to this change.\n\nThis patch finally allowed me to close kernel bugzilla bug #8169\n(once again thanks to Patrick Horn for reporting the issue \u0026 testing patches).\n\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "120b9cfddff2e398fece07c5e127f3fdbb660441", "tree": "25b493c4674a823069cac0f4b808b917439ea1df", "parents": [ "6f5050a96c9e0521f42a3a1d676c7ad9815f62ad" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 17 21:57:41 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 17 21:57:41 2007 +0100" }, "message": "ide: remove CONFIG_IDEDMA_{ICS,PCI}_AUTO config options\n\nAll modern distributions have been setting these options to \"y\" for ages.\n(additionally \"n\" cases have been obsoleted for few years). Therefore use\nDMA by default and remove CONFIG_IDEDMA_{ICS,PCI}_AUTO (also remove no longer\nneeded CONFIG_IDEDMA_AUTO). This fixes DMA support for rare configurations\nwhere CONFIG_IDEDMA_{ICS,PCI}_AUTO was set to \"n\" but \"hdparm -d 1\" was used\nto enable DMA support and which were forced to PIO mode by \"ide: don\u0027t allow\nDMA to be enabled if CONFIG_IDEDMA_{ICS,PCI}_AUTO\u003dn\" patch. There is no\nfunctionality loss because \"ide\u003dnodma\" kernel option is still available.\n\nCc: Patrick Horn \u003cphrh@yahoo.com\u003e\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Russell King \u003crmk+lkml@arm.linux.org.uk\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "849138827c962589ac50496fa7feeb2a2d51b467", "tree": "3b7988c756068f00ccf8a1440a0f3709a241bcad", "parents": [ "b6209a90eca8c9a464bf9c5b91741fb125185619" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 03 17:48:55 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 03 17:48:55 2007 +0100" }, "message": "ide: make legacy IDE VLB modules check for the \"probe\" kernel params (v2)\n\nLegacy IDE VLB host drivers didn\u0027t check for \"probe\" options when compiled\nas modules, which was obviously wrong as we don\u0027t want module to poke at\nrandom I/O ports by simply loading it. Fix it by adding \"probe\" module param\nto legacy IDE VLB host drivers.\n\nv2:\n* don\u0027t obsolete old \"ide0\u003ddtc2278/ht6560b/qd65xx/ali14xx/umc8672\"\n IDE driver options yet (per Alan Cox\u0027s request) and enhance documentation\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b6209a90eca8c9a464bf9c5b91741fb125185619", "tree": "1abca15051b7654571e7286fd9ae5dabf44a0816", "parents": [ "e76ecf86da99383f59f4c85f594403c5c3c1fe91" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 03 17:48:55 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 03 17:48:55 2007 +0100" }, "message": "ide: remove some obsoleted kernel params (v2)\n\nRemove\n\n* \"hdx\u003dserialize\"\n* \"idex\u003dnoautotune\"\n* \"idex\u003dautotune\"\n\nkernel params, they have been obsoleted for ages.\n\n\"idex\u003dserialize\", \"hdx\u003dnoautotune\" and \"hdx\u003dautotune\" are still available\nso there is no funcionality loss caused by this patch.\n\nv2:\n\n* fix CONFIG_BLK_DEV_4DRIVES\u003dy build broken by version 1 of the patch\n [ /me wearing brown paper bag ]\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "846c11abc7934a523a665a3b702358e6f2998e3e", "tree": "60f090cd6846fee09653dcc8345e56474f0c2ddf", "parents": [ "8693d3e47b5cd95e1a513f90bc5e0467ce885e24" ], "author": { "name": "Alan Cox", "email": "alan@redhat.com", "time": "Sat Mar 03 17:48:54 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 03 17:48:54 2007 +0100" }, "message": "ide: remove a ton of pointless #undef REALLY_SLOW_IO\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9e5755bce00bb563739aeb0f09932a1907521167", "tree": "4a16eb1f094f3e5df3eed09870dd0cffb9cf1143", "parents": [ "ed89616786d47093525a5dc039b1f502f5ada954" ], "author": { "name": "Andrew Morton", "email": "akpm@osdl.org", "time": "Sat Mar 03 17:48:54 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 03 17:48:54 2007 +0100" }, "message": "ide: fix pmac breakage\n\nFix breakage added in the IDE devel tree.\n\nAdd header, then fix\n\ndrivers/ide/ppc/pmac.c: In function `pmac_ide_setup_dma\u0027:\ndrivers/ide/ppc/pmac.c:2044: warning: assignment from incompatible pointer type\ndrivers/ide/ppc/pmac.c: In function `pmac_ide_dma_host_on\u0027:\ndrivers/ide/ppc/pmac.c:1989: warning: control reaches end of non-void function\ninclude/linux/pci.h: In function `pmac_ide_init\u0027:\ndrivers/ide/ppc/pmac.c:1563: warning: ignoring return value of `pci_register_driver\u0027, declared with attribute warn_unused_result\n\nThen add some apparently-long-missing error handling.\n\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nCc: Paul Mackerras \u003cpaulus@samba.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ccf352894ceef79d40d015e1deee4c46c3aa42ed", "tree": "e30b2b8a4c30e2ef1719ce9780322e671ebe3c43", "parents": [ "7469aaf6a30f4187ed6de7c0aed5c2dd2d1c2d31" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "message": "ide: make ide_hwif_t.ide_dma_host_on void (v2)\n\n* since ide_hwif_t.ide_dma_host_on is called either when drive-\u003eusing_dma \u003d\u003d 1\n or when return value is discarded make it void, also drop \"ide_\" prefix\n* make __ide_dma_host_on() void and drop \"__\" prefix\n\nv2:\n* while at it rename atiixp_ide_dma_host_on() to atiixp_dma_host_on()\n and sgiioc4_ide_dma_host_on() to sgiioc4_dma_host_on().\n [ Noticed by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "7469aaf6a30f4187ed6de7c0aed5c2dd2d1c2d31", "tree": "079930f23b3d14e4ad29ab972bc6d91fde52e5f0", "parents": [ "3608b5d71a52c053787dbad6af20c25f7e0b75a9" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "message": "ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void (v2)\n\n* since ide_hwif_t.ide_dma_{host_off,off_quietly} always return \u00270\u0027\n make these functions void and while at it drop \"ide_\" prefix\n* fix comment for __ide_dma_off_quietly()\n* make __ide_dma_{host_off,off_quietly,off}() void and drop \"__\" prefix\n\nv2:\n* while at it rename atiixp_ide_dma_host_off() to atiixp_dma_host_off(),\n sgiioc4_ide_dma_{host_off,off_quietly}() to sgiioc4_dma_{host_off,off_quietly}()\n and sl82c105_ide_dma_off_quietly() to sl82c105_dma_off_quietly()\n [ Noticed by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "3608b5d71a52c053787dbad6af20c25f7e0b75a9", "tree": "5bd6ac777d32d8426e65e3c31cc1587674771e8c", "parents": [ "9ef5791e1be91007951477b8ed1530ac1166a8e7" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "message": "ide: add ide_set_dma() helper (v2)\n\n* add ide_set_dma() helper and make ide_hwif_t.ide_dma_check return\n -1 when DMA needs to be disabled (\u003d\u003d need to call -\u003eide_dma_off_quietly)\n 0 when DMA needs to be enabled (\u003d\u003d need to call -\u003eide_dma_on)\n 1 when DMA setting shouldn\u0027t be changed\n* fix IDE code to use ide_set_dma() instead if using -\u003eide_dma_check directly\n\nv2:\n* updated for scc_pata\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "2ad1e558a2305c2b3d5099ee2f4a5929307c20ca", "tree": "79a530648cc26184c3b2e3933c0ebad614329b5b", "parents": [ "0ecdca26e556eae9668ce6de9554757dddb942ef" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "message": "ide: convert ide_hwif_t.mmio into flag (v2)\n\nAll users of -\u003emmio \u003d\u003d 1 are gone so convert -\u003emmio into flag.\n\nNoticed by Alan Cox.\n\nv2:\n* updated for scc_pata\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "0ecdca26e556eae9668ce6de9554757dddb942ef", "tree": "21d62c01d0c0d5aeea2524252ed8dec6ca20b6d4", "parents": [ "7569e8dc2213ecc47024ea5edbadc8736487d926" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "message": "ide: use PIO/MMIO operations directly where possible (v2)\n\nThis results in smaller/faster/simpler code and allows future optimizations.\nAlso remove no longer needed ide[_mm]_{inl,outl}() and ide_hwif_t.{INL,OUTL}.\n\nv2:\n* updated for scc_pata\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "c1607e1af238b823a2158a18ff6c89144ce38c6c", "tree": "75f51cbc38e306bbdb2f7eb4d1413991e4ee7948", "parents": [ "6679054895f9b1dc676d14637306b297451f1ac0" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:24 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:24 2007 +0100" }, "message": "ide: remove write-only ide_hwif_t.no_dsc flag\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "f0dd8712eb8cc5687b4582fbc41cfbcd55bba0d2", "tree": "190bc6cf68e056ae72d895dc2c9074de2c0ed18f", "parents": [ "fdb77da4ca68ae17a39d58c9d5c00479a7e124c0" ], "author": { "name": "Albert Lee", "email": "albertcc@tw.ibm.com", "time": "Sat Feb 17 02:40:21 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:21 2007 +0100" }, "message": "ide: clear bmdma status in ide_intr() for ICHx controllers (revised #4)\n\npatch 1/2 (revised):\n- Fix drive-\u003ewaiting_for_dma to work with CDB-intr devices.\n- Do the dma status clearing in ide_intr() and add a new\n hwif-\u003eide_dma_clear_irq for Intel ICHx controllers.\n\nRevised per Alan, Sergei and Bart\u0027s advice.\n\nPatch against 2.6.20-rc6. Tested ok on my ICH4 and pdc20275 adapters.\nPlease review/apply, thanks.\n\nSigned-off-by: Albert Lee \u003calbertcc@tw.ibm.com\u003e\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: \"Adam W. Hawks\" \u003cawhawks@us.ibm.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "e3a59b4d9378522479609042836ae930305a67fe", "tree": "1dd41aefac4d7f370dd3798818c2ca36c654fe7c", "parents": [ "78281c5350029e3fa21758d6db9b45ffc7bf72a1" ], "author": { "name": "Hannes Reinecke", "email": "hare@suse.de", "time": "Wed Feb 07 18:19:37 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Feb 07 18:19:37 2007 +0100" }, "message": "ACPI support for IDE devices\n\nThis patch implements ACPI integration for generic IDE devices.\nThe ACPI spec mandates that some methods are called during suspend and\nresume. And consequently there most modern Laptops cannot resume\nproperly without it.\n\nAccording to the spec, we should call \u0027_GTM\u0027 (Get Timing) upon suspend\nto store the current IDE adapter settings.\nUpon resume we should call \u0027_STM\u0027 (Set Timing) to initialize the\nadapter with the stored settings; afterwards \u0027_GTF\u0027 (Get Taskfile)\nshould be called which returns a buffer with some IDE initialisation\ncommands. Those commands should be passed to the drive.\n\nThere are two module params which control the behaviour of this patch:\n\n\u0027ide\u003dnoacpi\u0027\n\tDo not call any ACPI methods (Disables any ACPI method calls)\n\u0027ide\u003dacpigtf\u0027\n\tEnable execution of _GTF methods upon resume.\n\tHas no effect if \u0027ide\u003dnoacpi\u0027 is set.\n\u0027ide\u003dacpionboot\u0027\n\tEnable execution of ACPI methods during boot.\n\tThis might be required on some machines if \u0027ide\u003dacpigtf\u0027 is\n\tselected as some machines modify the _GTF information\n\tdepending on the drive identification passed down with _STM.\n\nSigned-off-by: Hannes Reinecke \u003chare@suse.de\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "eb7972271720bfc64dc8bacc5b15f874c0bcc859", "tree": "043945898426a305044b4624bb067b69ae03ebb2", "parents": [ "aaba6d4bf6f2a52a0c30ad1da4374ba24bd7163b" ], "author": { "name": "Al Viro", "email": "viro@ftp.linux.org.uk", "time": "Thu Feb 01 13:52:38 2007 +0000" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Feb 01 16:17:06 2007 -0800" }, "message": "[PATCH] ide section fixes\n\na) cleanup_module() should be __exit\nb) externs should match reality\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "6855036aa035913bc2bfb31c41576a49f42ecd5f", "tree": "7524fa60ef1a36ea6630a9b6613cb7099875569d", "parents": [ "82ab1eeceba6705cd5a8815c48eb03af1dada744" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Sat Jan 27 13:47:02 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Jan 27 13:47:02 2007 +0100" }, "message": "ide: unregister idepnp driver on unload\n\nidepnp driver is registered as a pnp driver on ide init but doesn\u0027t\nget unregistered on ide unload causing driver list corruption and\neventually oops. Fix it.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9a2239b1174bdf0952a21ed328cd74240d2dd173", "tree": "04082ce82de232a065436ed588edc56eb47018a0", "parents": [ "23a1b2a78705caa2ecaccf8422a1e22eaca59574" ], "author": { "name": "Peter Zijlstra", "email": "a.p.zijlstra@chello.nl", "time": "Wed Dec 06 20:36:13 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.osdl.org", "time": "Thu Dec 07 08:39:32 2006 -0800" }, "message": "[PATCH] lockdep: fix ide/proc interaction\n\n rmmod/3080 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:\n (proc_subdir_lock){--..}, at: [\u003cc04a33b0\u003e] remove_proc_entry+0x40/0x191\n\n and this task is already holding:\n (ide_lock){++..}, at: [\u003cc05651a2\u003e] ide_unregister_subdriver+0x39/0xc8\n which would create a new lock dependency:\n (ide_lock){++..} -\u003e (proc_subdir_lock){--..}\n\n but this new dependency connects a hard-irq-safe lock:\n (ide_lock){++..}\n ... which became hard-irq-safe at:\n [\u003cc043c458\u003e] lock_acquire+0x4b/0x6b\n [\u003cc06129d7\u003e] _spin_lock_irqsave+0x22/0x32\n [\u003cc0567870\u003e] ide_intr+0x17/0x1a9\n [\u003cc044eb31\u003e] handle_IRQ_event+0x20/0x4d\n [\u003cc044ebf2\u003e] __do_IRQ+0x94/0xef\n [\u003cc0406771\u003e] do_IRQ+0x9e/0xbd\n\n to a hard-irq-unsafe lock:\n (proc_subdir_lock){--..}\n ... which became hard-irq-unsafe at:\n ... [\u003cc043c458\u003e] lock_acquire+0x4b/0x6b\n [\u003cc06126ab\u003e] _spin_lock+0x19/0x28\n [\u003cc04a32f2\u003e] xlate_proc_name+0x1b/0x99\n [\u003cc04a3547\u003e] proc_create+0x46/0xdf\n [\u003cc04a3642\u003e] create_proc_entry+0x62/0xa5\n [\u003cc07c1972\u003e] proc_misc_init+0x1c/0x1d2\n [\u003cc07c1844\u003e] proc_root_init+0x4c/0xe9\n [\u003cc07ad703\u003e] start_kernel+0x294/0x3b3\n\nMove ide_remove_proc_entries() out from under ide_lock; there is nothing\nthat indicates that this is needed.\n\nIn specific, the call to ide_add_proc_entries() is unprotected, and there\nis nothing else in the file using the respective -\u003eproc fields. Also the\nlock order around destroy_proc_ide_interface() suggests this.\n\nAlan sayeth:\n\n proc_ide_write_settings walks the setting list under ide_setting_sem, read\n ditto. remove_proc_entry is doing proc side housekeeping.\n\n Looks fine to me, although that old code is such a mess anything could be\n going on.\n\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "913759ac90a727b86da72efcfb70931f497d1cb7", "tree": "f95e10f757e93eca8eacbf03985c09994ec4ef46", "parents": [ "b86cc29dc42203588264d917e88134bdd500b0d7" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Tue Oct 03 01:14:33 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Tue Oct 03 08:04:08 2006 -0700" }, "message": "[PATCH] ide: Fix crash on repeated reset\n\nMichal Miroslaw reported a problem (bugzilla #7023) where a user initiated\nreset while the IDE layer was already resetting the channel caused a crash,\nand provided a rough fix.\n\nThis is a slightly cleaner version of the fix which tracks the reset state\nand blocks further reset requests while a reset is in progress.\n\nNote this is not a security issue - random end users can\u0027t access the\nioctl in question anyway.\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nCc: Michal Miroslaw \u003cmirq-linux@rere.qmqm.pl\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "349ae23fe7379a42973bcb1c85f7d43ec583c17d", "tree": "2f885e437a59a23f04161e9761b86a8421ab6ff7", "parents": [ "5ac24697699b394cdebac0a2329ce3af247d6a3b" ], "author": { "name": "Randy Dunlap", "email": "rdunlap@xenotime.net", "time": "Tue Oct 03 01:14:23 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Tue Oct 03 08:04:08 2006 -0700" }, "message": "[PATCH] IDE core: driver layer error checking\n\nCheck driver layer return values in IDE core.\n\nSigned-off-by: Randy Dunlap \u003crdunlap@xenotime.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" } ], "next": "020e322de3ff75d32daa58e431aad07071da27c6" }