)]}' { "log": [ { "commit": "689da1b3b8b37ff41e79f3fb973c06cdfeef12e5", "tree": "57accde02817fa1fdb61ddafd16263294e065ed8", "parents": [ "038659e7c6b385065cb223872771ac437ef70b62" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Sat May 02 00:37:18 2009 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 20 14:46:22 2009 -0400" }, "message": "wireless: rename IEEE80211_CHAN_NO_FAT_* to HT40-/+\n\nThis is more consistent with our nl80211 naming convention\nfor HT40-/+.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "038659e7c6b385065cb223872771ac437ef70b62", "tree": "df9e86adcc611d10ed5f98672421bffe1f43989f", "parents": [ "97bc54152e3a91dd2dc297e8a084c05e93527e60" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Sat May 02 00:37:17 2009 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 20 14:46:22 2009 -0400" }, "message": "cfg80211: Process regulatory max bandwidth checks for HT40\n\nWe are not correctly listening to the regulatory max bandwidth\nsettings. To actually make use of it we need to redesign things\na bit. This patch does the work for that. We do this to so we\ncan obey to regulatory rules accordingly for use of HT40.\n\nWe end up dealing with HT40 by having two passes for each channel.\n\nThe first check will see if a 20 MHz channel fits into the channel\u0027s\ncenter freq on a given frequency range. We check for a 20 MHz\nbanwidth channel as that is the maximum an individual channel\nwill use, at least for now. The first pass will go ahead and\ncheck if the regulatory rule for that given center of frequency\nallows 40 MHz bandwidths and we use this to determine whether\nor not the channel supports HT40 or not. So to support HT40 you\u0027ll\nneed at a regulatory rule that allows you to use 40 MHz channels\nbut you\u0027re channel must also be enabled and support 20 MHz by itself.\n\nThe second pass is done after we do the regulatory checks over\nan device\u0027s supported channel list. On each channel we\u0027ll check\nif the control channel and the extension both:\n\n o exist\n o are enabled\n o regulatory allows 40 MHz bandwidth on its frequency range\n\nThis work allows allows us to idependently check for HT40- and\nHT40+.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "645069299a1c7358cf7330afe293f07552f11a5d", "tree": "889c39a10ef09cd77c5b052ef837bb4b53bddd83", "parents": [ "9af28511be10e175eb0cabb2ba5cfafe77408d84" ], "author": { "name": "Sascha Hlusiak", "email": "contact@saschahlusiak.de", "time": "Tue May 19 12:56:52 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue May 19 16:02:02 2009 -0700" }, "message": "sit: stateless autoconf for isatap\n\nbe sent periodically. The rs_delay can be speficied when adding the\nPRL entry and defaults to 15 minutes.\n\nThe RS is sent from every link local adress that\u0027s assigned to the\ntunnel interface. It\u0027s directed to the (guessed) linklocal address\nof the router and is sent through the tunnel.\n\nBetter: send to ff02::2 encapsuled in unicast directed to router-v4.\n\nSigned-off-by: Sascha Hlusiak \u003ccontact@saschahlusiak.de\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "bb803cfbecb03a0cf8dc7e1864f18dda6631af00", "tree": "6c0989693bea6f50cfa5c6bb14f52ec19668def3", "parents": [ "3878fb6fdbceecca20b15748f807340854220f06", "511e11e396dc596825ce04d53d7f6d579404bc01" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon May 18 21:08:20 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon May 18 21:08:20 2009 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\tdrivers/scsi/fcoe/fcoe.c\n" }, { "commit": "82d048186e403f36e083b37ad42aa90abb7dcaac", "tree": "dc0b92ace036ef435318f38ef35b8c6e6b84103a", "parents": [ "62551d3ea05242d97d47f26fb517b2dfdb752310", "d3707d9918d47c0997a6b1e4ae24e7ab55e43796" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon May 18 14:48:30 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon May 18 14:48:30 2009 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n" }, { "commit": "8b3521eeb7598c3b10c7e14361a7974464527702", "tree": "dbad2dc2822694f86493cf60e4b969f80fbce3d1", "parents": [ "980c9e8ceeb69ac4c921173d0d06323f5c678647" ], "author": { "name": "Rami Rosen", "email": "ramirose@gmail.com", "time": "Mon May 11 05:52:49 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun May 17 11:59:45 2009 -0700" }, "message": "ipv4: remove an unused parameter from configure method of fib_rules_ops.\n\nSigned-off-by: Rami Rosen \u003cramirose@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "3f77316c6b99f596bfbf72c0542f47f7230b702e", "tree": "d9c8634e62917687c9a2741fdd72dd2c19c04727", "parents": [ "eccb8e8f0c3af47aeb6dbe4012eb8d4fc888767a" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Mon May 11 21:57:57 2009 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 13 15:44:37 2009 -0400" }, "message": "nl80211: Add IEEE 802.1X PAE control for station mode\n\nAdd a new NL80211_ATTR_CONTROL_PORT flag for NL80211_CMD_ASSOCIATE to\nallow user space to indicate that it will control the IEEE 802.1X port\nin station mode. Previously, mac80211 was always marking the port\nauthorized in station mode. This was enough when drop_unencrypted flag\nwas set. However, drop_unencrypted can currently be controlled only\nwith WEXT and the current nl80211 design does not allow fully secure\nconfiguration. Fix this by providing a mechanism for user space to\ncontrol the IEEE 802.1X port in station mode (i.e., do the same that\nwe are already doing in AP mode).\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "eccb8e8f0c3af47aeb6dbe4012eb8d4fc888767a", "tree": "3705a833e4a5efb08beb2bfc4175775171e74295", "parents": [ "0e46724a48fcc3bac1fecea413d20af64a75844f" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon May 11 21:57:56 2009 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 13 15:44:35 2009 -0400" }, "message": "nl80211: improve station flags handling\n\nIt is currently not possible to modify station flags, but that\ncapability would be very useful. This patch introduces a new\nnl80211 attribute that contains a set/mask for station flags,\nand updates the internal API (and mac80211) to mirror that.\n\nThe new attribute is parsed before falling back to the old so\nthat userspace can specify both (if it can) to work on all\nkernels.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "08645126dd24872c2e27014f93968f7312e29176", "tree": "2011cb3cb2f70d35278ef3b39ea696a058fb7b29", "parents": [ "7be69c0b9aa93ef655db4d46e5654996489d62f5" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon May 11 13:54:58 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 13 15:44:32 2009 -0400" }, "message": "cfg80211: implement wext key handling\n\nMove key handling wireless extension ioctls from mac80211 to cfg80211\nso that all drivers that implement the cfg80211 operations get wext\ncompatibility.\n\nNote that this drops the SIOCGIWENCODE ioctl support for getting\nIW_ENCODE_RESTRICTED/IW_ENCODE_OPEN. This means that iwconfig will\nno longer report \"Security mode:open\" or \"Security mode:restricted\"\nfor mac80211. However, what we displayed there (the authentication\nalgo used) was actually wrong -- linux/wireless.h states that this\nsetting is meant to differentiate between \"Refuse non-encoded packets\"\nand \"Accept non-encoded packets\".\n\n(Combined with \"cfg80211: fix a couple of bugs with key ioctls\". -- JWL)\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cbe8fa9c5e88fd5f554ebc519af3b0ed17dde0dd", "tree": "0ec44646879e49f7254ba15970ca9a168bc00d8f", "parents": [ "4e943900fb9675d3a5ebdabc2cd4a9a54edace97" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sat May 09 20:09:03 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon May 11 15:24:07 2009 -0400" }, "message": "cfg80211: put wext data into substructure\n\nTo make it more apparent in the code what is for wext\nonly (and needs to be #ifdef\u0027ed) put all the info for\nwext into a substruct in each wireless_dev.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4e943900fb9675d3a5ebdabc2cd4a9a54edace97", "tree": "72b6492d01dffa834133c0cdbd52ce4b65392332", "parents": [ "8fbff4b838c53945d6baeafe609c627000f85cd6" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sat May 09 20:06:47 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon May 11 15:24:07 2009 -0400" }, "message": "cfg80211: constify key mac address in ops\n\nThe address pointed to by mac_addr can be marked as const.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "44033f80cefd1d7b474efdabc412476d4bafb8f4", "tree": "6dde9173f612ddb88b5d244593bf6c66f6fcea54", "parents": [ "413ad50a5c15f3bae8075c15b101679f05c37a69" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri May 08 21:21:41 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon May 11 15:23:57 2009 -0400" }, "message": "mac80211: remove ieee80211_ht_bss_info\n\nThis struct is no longer used (and hasn\u0027t been for a while).\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9ed6bcce77f75d98af6ee07069deac6041948bee", "tree": "9fff3d257612ed049b28a80681fbd987f4de3ec4", "parents": [ "5a9940118a616266183c53a9ee4352feadb9c2e8" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri May 08 20:47:39 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon May 11 15:23:57 2009 -0400" }, "message": "mac80211: move HT operation mode BSS info\n\nThere really is no need to have a separate struct for a\nsingle variable. The fact that it exists is due to the\ncode legacy, but we can remove that now. Very simple.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "dc6382ced07d6bad61d0b591fb12ab5da7ca632c", "tree": "277d03c28c0756368d663d1b053ceaed196f666e", "parents": [ "ed9b58bc443a1210b5be1ded6421b17e015bf985" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Wed May 06 22:09:37 2009 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon May 11 15:23:54 2009 -0400" }, "message": "nl80211 : Add support for configuring MFP\n\nNL80211_CMD_ASSOCIATE request must be able to indicate whether\nmanagement frame protection (IEEE 802.11w) is being used. mac80211 was\nable to use MFP in client mode only with WEXT, but the new\nNL80211_ATTR_USE_MFP attribute will allow this to be done with\nnl80211, too.\n\nSince we are currently using nl80211 for MFP only with drivers that\nuse user space SME, only MFP disabled and required values are\nused. However, the NL80211_ATTR_USE_MFP attribute is an enum that can\nbe extended with MFP optional in the future, if that is needed with\nsome drivers (e.g., if the RSN IE is generated by the driver).\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a8679be2073392cf22a910bc25da0c7d36459845", "tree": "0d25750ea4ba3a85fe683f285261083d77080976", "parents": [ "22f6dacdfcfdc792d068e9c41234808860498d04", "9dfd6ba353b993d648dcda72480c7ce92cd27c7e" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri May 08 12:46:17 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri May 08 12:46:17 2009 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n" }, { "commit": "22f6dacdfcfdc792d068e9c41234808860498d04", "tree": "281a7d476f256ea3e2f800177ba685b169cc0540", "parents": [ "928f308f556f4943e50c5064b546f47bce301f02", "9b05126baa146fc3f41360164141d4e1b3ea93c4" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri May 08 02:48:30 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri May 08 02:48:30 2009 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\tinclude/net/tcp.h\n" }, { "commit": "7aedec2ad5314b173e78ca3f4edb4ceaa02248bb", "tree": "9b9ed7561bf13bcaa11f1f6ac7b4da2c444b0044", "parents": [ "f5f8d86b231e0489c33542c42afbb14d32411ee8" ], "author": { "name": "Eric Dumazet", "email": "dada1@cosmosbay.com", "time": "Thu May 07 07:20:39 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu May 07 14:52:28 2009 -0700" }, "message": "tcp: tcp_prequeue() can use keyed wakeups\n\nWe can avoid waking up tasks not interested in receive notifications,\nusing wake_up_interruptible_poll() instead of wake_up_interruptible()\n\nSigned-off-by: Eric Dumazet \u003cdada1@cosmosbay.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "f5f8d86b231e0489c33542c42afbb14d32411ee8", "tree": "c78033e5ca7a340b4f709b29b2727d68536ea834", "parents": [ "4d5b78c055c76bb563c4a43d2adb92735b3b9405" ], "author": { "name": "Eric Dumazet", "email": "dada1@cosmosbay.com", "time": "Thu May 07 07:08:38 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu May 07 14:52:26 2009 -0700" }, "message": "tcp: tcp_prequeue() cleanup\n\nSmall cleanup patch to reduce line lengths, before a change in\ntcp_prequeue().\n\nSigned-off-by: Eric Dumazet \u003cdada1@cosmosbay.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5cff20e6c5a6591a79d3b027af222870f52bb550", "tree": "81b6ebb75c1dc87b65258e71526c1581d168156c", "parents": [ "9955151df7c6452cae2ed9649f53d265c91cf155" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Apr 29 12:26:17 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 06 15:14:51 2009 -0400" }, "message": "mac80211: tell driver when idle\n\nWhen we aren\u0027t doing anything in mac80211, we can turn off\nmuch of the hardware, depending on the driver/hw. Not doing\nanything, aka being idle, means:\n\n * no monitor interfaces\n * no AP/mesh/wds interfaces\n * any station interfaces are in DISABLED state\n * any IBSS interfaces aren\u0027t trying to be in a network\n * we aren\u0027t trying to scan\n\nBy creating a new function that verifies these conditions and calling\nit at strategic points where the states of those conditions change,\nwe can easily make mac80211 tell the driver when we are idle to save\npower.\n\nAdditionally, this fixes a small quirk where a recalculated powersave\nstate is passed to the driver even if the hardware is about to stopped\ncompletely.\n\nThis patch intentionally doesn\u0027t touch radio_enabled because that is\ncurrently implemented to be a soft rfkill which is inappropriate here\nwhen we need to be able to wake up with low latency.\n\nOne thing I\u0027m not entirely sure about is this:\n\n phy0: device no longer idle - in use\n wlan0: direct probe to AP 00:11:24:91:07:4d try 1\n wlan0 direct probe responded\n wlan0: authenticate with AP 00:11:24:91:07:4d\n wlan0: authenticated\n\u003e phy0: device now idle\n\u003e phy0: device no longer idle - in use\n wlan0: associate with AP 00:11:24:91:07:4d\n wlan0: RX AssocResp from 00:11:24:91:07:4d (capab\u003d0x401 status\u003d0 aid\u003d1)\n wlan0: associated\n\nIs it appropriate to go into idle state for a short time when we have\njust authenticated, but not associated yet? This happens only with the\nuserspace SME, because we cannot really know how long it will wait\nbefore asking us to associate. Would going idle after a short timeout\nbe more appropriate? We may need to revisit this, depending on what\nhappens.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2d0ddec5b2b859f06116f631fc0ffe94fbceb556", "tree": "9bf3cdfcbbefcb34f5984e6d797f488ebe358196", "parents": [ "57c4d7b4c4986037be51476b8e3025d5ba18d8b8" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Apr 23 16:13:26 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 06 15:14:36 2009 -0400" }, "message": "mac80211: unify config_interface and bss_info_changed\n\nThe config_interface method is a little strange, it contains the\nBSSID and beacon updates, while bss_info_changed contains most\nother BSS information for each interface. This patch removes\nconfig_interface and rolls all the information it previously\npassed to drivers into bss_info_changed.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "57c4d7b4c4986037be51476b8e3025d5ba18d8b8", "tree": "bcd24a127b4c79891f45799a20867f49c0f7f949", "parents": [ "f3b85252f081581a8f257545ed748062dce7798b" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Apr 23 16:10:04 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 06 15:14:33 2009 -0400" }, "message": "mac80211: clean up beacon interval settings\n\nWe currently have two beacon interval configuration knobs:\nhw.conf.beacon_int and vif.bss_info.beacon_int. This is\nrather confusing, even though the former is used when we\nbeacon ourselves and the latter when we are associated to\nan AP.\n\nThis just deprecates the hw.conf.beacon_int setting in favour\nof always using vif.bss_info.beacon_int. Since it touches all\nthe beaconing IBSS code anyway, we can also add support for\nthe cfg80211 IBSS beacon interval configuration easily.\n\nNOTE: The hw.conf.beacon_int setting is retained for now due\n to drivers still using it -- I couldn\u0027t untangle all\n drivers, some are updated in this patch.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9ccebe6148bcb0aba2d89743df2ff182ced505ec", "tree": "7209957870ae665e651510fe1828a03be9ea01e3", "parents": [ "d5edaedc16ebd0635435dec068d49e07a76ba7d9" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Apr 23 10:32:36 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 06 15:14:29 2009 -0400" }, "message": "mac80211: rename max_sleep_interval to max_sleep_period\n\nKalle points out that max_sleep_interval is somewhat confusing\nbecause the value is measured in beacon intervals, and not in\nTU. Rename it to max_sleep_period to be consistent with things\nlike DTIM period that are also measured in beacon intervals.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "80445de57764b45fc26315c19fe7dc9fc57c2c65", "tree": "dc288dd1fbf94dae32e08ac9549ed814c2463f99", "parents": [ "32bc66d8d0edc9b04dea9ebac299bdb7ad781d6b", "bc83871e8325bb17da2930a76c2a3806377a76c5" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue May 05 08:26:10 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue May 05 08:26:10 2009 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits)\n e1000: fix virtualization bug\n bonding: fix alb mode locking regression\n Bluetooth: Fix issue with sysfs handling for connections\n usbnet: CDC EEM support (v5)\n tcp: Fix tcp_prequeue() to get correct rto_min value\n ehea: fix invalid pointer access\n ne2k-pci: Do not register device until initialized.\n Subject: [PATCH] br2684: restore net_dev initialization\n net: Only store high 16 bits of kernel generated filter priorities\n virtio_net: Fix function name typo\n virtio_net: Cleanup command queue scatterlist usage\n bonding: correct the cleanup in bond_create()\n virtio: add missing include to virtio_net.h\n smsc95xx: add support for LAN9512 and LAN9514\n smsc95xx: configure LED outputs\n netconsole: take care of NETDEV_UNREGISTER event\n xt_socket: checks for the state of nf_conntrack\n bonding: bond_slave_info_query() fix\n cxgb3: fixing gcc 4.4 compiler warning: suggest parentheses around operand of ‘!’\n netfilter: use likely() in xt_info_rdlock_bh()\n ...\n" }, { "commit": "a67e899cf38ae542d1a028ccd021f9189f76fb74", "tree": "d0bb79ccbdd5737745e99acbc569605bc74bc446", "parents": [ "9f722c0978b04acba209f8ca1896ad05814bc3a3" ], "author": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat May 02 18:24:06 2009 -0700" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Mon May 04 14:29:02 2009 -0700" }, "message": "Bluetooth: Fix issue with sysfs handling for connections\n\nDue to a semantic changes in flush_workqueue() the current approach of\nsynchronizing the sysfs handling for connections doesn\u0027t work anymore. The\nwhole approach is actually fully broken and based on assumptions that are\nno longer valid.\n\nWith the introduction of Simple Pairing support, the creation of low-level\nACL links got changed. This change invalidates the reason why in the past\ntwo independent work queues have been used for adding/removing sysfs\ndevices. The adding of the actual sysfs device is now postponed until the\nhost controller successfully assigns an unique handle to that link. So\nthe real synchronization happens inside the controller and not the host.\n\nThe only left-over problem is that some internals of the sysfs device\nhandling are not initialized ahead of time. This leaves potential access\nto invalid data and can cause various NULL pointer dereferences. To fix\nthis a new function makes sure that all sysfs details are initialized\nwhen an connection attempt is made. The actual sysfs device is only\nregistered when the connection has been successfully established. To\navoid a race condition with the registration, the check if a device is\nregistered has been moved into the removal work.\n\nAs an extra protection two flush_work() calls are left in place to\nmake sure a previous add/del work has been completed first.\n\nBased on a report by Marc Pignat \u003cmarc.pignat@hevs.ch\u003e\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\nTested-by: Justin P. Mattock \u003cjustinmattock@gmail.com\u003e\nTested-by: Roger Quadros \u003cext-roger.quadros@nokia.com\u003e\nTested-by: Marc Pignat \u003cmarc.pignat@hevs.ch\u003e\n" }, { "commit": "0c266898b42fe4e4e2f9edfc9d3474c10f93aa6a", "tree": "d964259d2fdd67f22f005852b1770c40ba4d6474", "parents": [ "0b2febf38a33d7c40fb7bb4a58c113a1fa33c412" ], "author": { "name": "Satoru SATOH", "email": "satoru.satoh@gmail.com", "time": "Mon May 04 11:11:01 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon May 04 11:11:01 2009 -0700" }, "message": "tcp: Fix tcp_prequeue() to get correct rto_min value\n\ntcp_prequeue() refers to the constant value (TCP_RTO_MIN) regardless of\nthe actual value might be tuned. The following patches fix this and make\ntcp_prequeue get the actual value returns from tcp_rto_min().\n\nSigned-off-by: Satoru SATOH \u003csatoru.satoh@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "accc5b4f902b0ba83b2c6c48f2d9e7c204cef4a8", "tree": "14378867a326244639a809005dba1b1014dd38de", "parents": [ "eb457f36929da6d78c1f03cbb9038ef62646d79d" ], "author": { "name": "Rami Rosen", "email": "ramirose@gmail.com", "time": "Sun May 03 08:58:48 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun May 03 14:19:51 2009 -0700" }, "message": "ipv4: remove unused macro (FIB_RES_RESET) from ip_fib.h.\n\nSigned-off-by: Rami Rosen \u003cramirose@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "aba7453037c3a90714caae77a622dceaf1173786", "tree": "bf07f9f432b0d8e9db9486f1f32ad065c0aa7c5c", "parents": [ "a4fe91ee711f4e955ea85ab05b092cfe384b073e", "93af7aca44f0e82e67bda10a0fb73d383edcc8bd" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 29 20:30:35 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Apr 29 20:30:35 2009 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\tDocumentation/isdn/00-INDEX\n\tdrivers/net/wireless/iwlwifi/iwl-scan.c\n\tdrivers/net/wireless/rndis_wlan.c\n\tnet/mac80211/main.c\n" }, { "commit": "052b30b0a8eec8db5b18ad49effdf2a9ba4c1e1a", "tree": "a7e772ecb7b13ef1d67e75e62ae00bb68cdf398c", "parents": [ "f3784d834c71689336fa272df420b45345cb6b84" ], "author": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sun Apr 26 20:01:22 2009 +0200" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Tue Apr 28 09:31:38 2009 -0700" }, "message": "Bluetooth: Add different pairing timeout for Legacy Pairing\n\nThe Bluetooth stack uses a reference counting for all established ACL\nlinks and if no user (L2CAP connection) is present, the link will be\nterminated to save power. The problem part is the dedicated pairing\nwhen using Legacy Pairing (Bluetooth 2.0 and before). At that point\nno user is present and pairing attempts will be disconnected within\n10 seconds or less. In previous kernel version this was not a problem\nsince the disconnect timeout wasn\u0027t triggered on incoming connections\nfor the first time. However this caused issues with broken host stacks\nthat kept the connections around after dedicated pairing. When the\nsupport for Simple Pairing got added, the link establishment procedure\nneeded to be changed and now causes issues when using Legacy Pairing\n\nWhen using Simple Pairing it is possible to do a proper reference\ncounting of ACL link users. With Legacy Pairing this is not possible\nsince the specification is unclear in some areas and too many broken\nBluetooth devices have already been deployed. So instead of trying to\ndeal with all the broken devices, a special pairing timeout will be\nintroduced that increases the timeout to 60 seconds when pairing is\ntriggered.\n\nIf a broken devices now puts the stack into an unforeseen state, the\nworst that happens is the disconnect timeout triggers after 120 seconds\ninstead of 4 seconds. This allows successful pairings with legacy and\nbroken devices now.\n\nBased on a report by Johan Hedberg \u003cjohan.hedberg@nokia.com\u003e\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "f3784d834c71689336fa272df420b45345cb6b84", "tree": "bfed4c21b3b3360bab0eb8123595e911adfbfdcf", "parents": [ "bf368e4e70cd4e0f880923c44e95a4273d725ab4" ], "author": { "name": "Roger Quadros", "email": "ext-roger.quadros@nokia.com", "time": "Thu Apr 23 14:50:54 2009 +0300" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Tue Apr 28 09:31:38 2009 -0700" }, "message": "Bluetooth: Ensure that HCI sysfs add/del is preempt safe\n\nUse a different work_struct variables for add_conn() and del_conn() and\nuse single work queue instead of two for adding and deleting connections.\n\nIt eliminates the following error on a preemptible kernel:\n\n[ 204.358032] Unable to handle kernel NULL pointer dereference at virtual address 0000000c\n[ 204.370697] pgd \u003d c0004000\n[ 204.373443] [0000000c] *pgd\u003d00000000\n[ 204.378601] Internal error: Oops: 17 [#1] PREEMPT\n[ 204.383361] Modules linked in: vfat fat rfcomm sco l2cap sd_mod scsi_mod iphb pvr2d drm omaplfb ps\n[ 204.438537] CPU: 0 Not tainted (2.6.28-maemo2 #1)\n[ 204.443664] PC is at klist_put+0x2c/0xb4\n[ 204.447601] LR is at klist_put+0x18/0xb4\n[ 204.451568] pc : [\u003cc0270f08\u003e] lr : [\u003cc0270ef4\u003e] psr: a0000113\n[ 204.451568] sp : cf1b3f10 ip : cf1b3f10 fp : cf1b3f2c\n[ 204.463104] r10: 00000000 r9 : 00000000 r8 : bf08029c\n[ 204.468353] r7 : c7869200 r6 : cfbe2690 r5 : c78692c8 r4 : 00000001\n[ 204.474945] r3 : 00000001 r2 : cf1b2000 r1 : 00000001 r0 : 00000000\n[ 204.481506] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel\n[ 204.488861] Control: 10c5387d Table: 887fc018 DAC: 00000017\n[ 204.494628] Process btdelconn (pid: 515, stack limit \u003d 0xcf1b22e0)\n\nSigned-off-by: Roger Quadros \u003cext-roger.quadros@nokia.com\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "edf391ff17232f097d72441c9ad467bcb3b5db18", "tree": "3d1566e92aff168be842f6033695d234b6597180", "parents": [ "06bd12c3b861f8ca9e1215428b19dc0026c6268f" ], "author": { "name": "Neil Horman", "email": "nhorman@tuxdriver.com", "time": "Mon Apr 27 02:45:02 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 27 02:45:02 2009 -0700" }, "message": "snmp: add missing counters for RFC 4293\n\nThe IP MIB (RFC 4293) defines stats for InOctets, OutOctets, InMcastOctets and\nOutMcastOctets:\nhttp://tools.ietf.org/html/rfc4293\nBut it seems we don\u0027t track those in any way that easy to separate from other\nprotocols. This patch adds those missing counters to the stats file. Tested\nsuccessfully by me\n\nWith help from Eric Dumazet.\n\nSigned-off-by: Neil Horman \u003cnhorman@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "92ae3efa53b481ad669d8b85c6cfa37d774bb21e", "tree": "0377eb1bafa6f378f64c69504736d34ea0131d61", "parents": [ "495a1b4eff1a216a3ea171ac137f1807e6555f52" ], "author": { "name": "Rami Rosen", "email": "ramirose@gmail.com", "time": "Mon Apr 27 02:35:32 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 27 02:35:32 2009 -0700" }, "message": "ipv4: remove unused member in fib_table.\n\nThis patch removes an unused parameter (tb_stamp) from fib_table\nstructure in include/net/ip_fib.h.\n\nSigned-off-by: Rami Rosen \u003cramirose@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "495a1b4eff1a216a3ea171ac137f1807e6555f52", "tree": "72d059d6d66fac6a74df33bac2eb40dcd0ea0732", "parents": [ "ad8affd972a705a38e769859c50ee8e749b631da", "d3feaf5ad12259927039a675cfb25dc342b403ab" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Apr 25 16:36:46 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Apr 25 16:36:46 2009 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n\nConflicts:\n\tnet/mac80211/pm.c\n" }, { "commit": "09488e2e0fab14ebe41135f0d066cfe2c56ba9e5", "tree": "d4435618235088720f7cbc2ac9624e4b8cb0bf7a", "parents": [ "802788bf90f78e7f248e78d4d0510bb00e976db8" ], "author": { "name": "Hendrik Brueckner", "email": "brueckner@linux.vnet.ibm.com", "time": "Tue Apr 21 23:26:27 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 23 04:04:38 2009 -0700" }, "message": "af_iucv: New socket option for setting IUCV MSGLIMITs\n\nThe SO_MSGLIMIT socket option modifies the message limit for new\nIUCV communication paths.\n\nThe message limit specifies the maximum number of outstanding messages\nthat are allowed for connections. This setting can be lowered by z/VM\nwhen an IUCV connection is established.\n\nExpects an integer value in the range of 1 to 65535.\nThe default value is 65535.\n\nThe message limit must be set before calling connect() or listen()\nfor sockets.\n\nIf sockets are already connected or in state listen, changing the message\nlimit is not supported.\nFor reading the message limit value, unconnected sockets return the limit\nthat has been set or the default limit. For connected sockets, the actual\nmessage limit is returned. The actual message limit is assigned by z/VM\nfor each connection and it depends on IUCV MSGLIMIT authorizations\nspecified for the z/VM guest virtual machine.\n\nSigned-off-by: Hendrik Brueckner \u003cbrueckner@linux.vnet.ibm.com\u003e\nSigned-off-by: Ursula Braun \u003cursula.braun@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "44b1e6b5f9a93cc2ba024e09cf137d5f1b5f8426", "tree": "1daabfda256f7b5d7e6ccc0e7200ce7888f0a2b9", "parents": [ "b8942e3b6c4b35dda5e8ca75aec5e2f027fe39a9" ], "author": { "name": "Hendrik Brueckner", "email": "brueckner@linux.vnet.ibm.com", "time": "Tue Apr 21 23:26:24 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 23 04:04:35 2009 -0700" }, "message": "af_iucv: Modify iucv msg target class using control msghdr\n\nAllow \u0027classification\u0027 of socket data that is sent or received over\nan af_iucv socket. For classification of data, the target class of an\n(native) iucv message is used.\n\nThis patch provides the cmsg interface for iucv_sock_recvmsg() and\niucv_sock_sendmsg(). Applications can use the msg_control field of\nstruct msghdr to set or get the target class as a\n\"socket control message\" (SCM/CMSG).\n\nSigned-off-by: Hendrik Brueckner \u003cbrueckner@linux.vnet.ibm.com\u003e\nSigned-off-by: Ursula Braun \u003cursula.braun@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "9d5c5d8f4105dc56ec10864b195dd1714f282c22", "tree": "075499708835271c15fa60b836a3e0f8723f6ba4", "parents": [ "af88b52def76679c8c5bcdbed199fbe62b6a16d4" ], "author": { "name": "Hendrik Brueckner", "email": "brueckner@linux.vnet.ibm.com", "time": "Tue Apr 21 23:26:22 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 23 04:04:32 2009 -0700" }, "message": "af_iucv: add sockopt() to enable/disable use of IPRM_DATA msgs\n\nProvide the socket operations getsocktopt() and setsockopt() to enable/disable\nsending of data in the parameter list of IUCV messages.\nThe patch sets respective flag only.\n\nSigned-off-by: Hendrik Brueckner \u003cbrueckner@linux.vnet.ibm.com\u003e\nSigned-off-by: Ursula Braun \u003cursula.braun@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "1965c85331ed29dc4fd32479ff31663e3e9a518f", "tree": "1542f0fdf4121491671bbb604564cb4f6dd1ad58", "parents": [ "ff2ba188fc5eaae529cb2ef9b127c3ca2a7df4b9" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Wed Apr 22 21:38:25 2009 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:57:21 2009 -0400" }, "message": "nl80211: Add event for authentication/association timeout\n\nSME needs to be notified when the authentication or association\nattempt times out and MLME has stopped processing in order to allow\nthe SME to decide what to do next.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "04fe20372e70685d9f15966216cdffd3795fe590", "tree": "8de1ed35372e2f2bcfd9f36cb89647ce1507922d", "parents": [ "8e30bc55de98c000b0b836cb42525c82f605f191" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Apr 22 18:44:37 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:57:20 2009 -0400" }, "message": "mac80211: calculate maximum sleep interval\n\nThe maximum sleep interval, for powersave purposes, is\ndetermined by the DTIM period (it may not be larger)\nand the required networking latency (it must be small\nenough to fulfil those constraints).\n\nThis makes mac80211 calculate the maximum sleep interval\nbased on those constraints, and pass it to the driver.\nThen the driver should instruct the device to sleep at\nmost that long.\n\nNote that the device is responsible for aligning the\nmaximum sleep interval between DTIMs, we make sure it\u0027s\nnot longer but it needs to make sure it\u0027s between them.\n\nAlso, group some powersave documentation together and\nmake it more explicit that we support managed mode only,\nand no IBSS powersaving (yet).\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8e30bc55de98c000b0b836cb42525c82f605f191", "tree": "6b413976c2064157c3268b87921d4e2a7595f831", "parents": [ "e255d5eb2b478eec1416b46aea03798b64355402" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Apr 22 17:45:38 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:57:20 2009 -0400" }, "message": "nl80211: allow configuring IBSS beacon interval\n\nMake the JOIN_IBSS command look at the beacon interval\nattribute to see if the user requested a specific beacon\ninterval, if not default to 100 TU (wext too).\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e255d5eb2b478eec1416b46aea03798b64355402", "tree": "db4ccb922a585adb00c490b77dc4764ccb39964e", "parents": [ "1d4df3a50f40a731fc03c86a76535ed141b0e4bc" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Apr 22 12:40:07 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:57:20 2009 -0400" }, "message": "mac80211: remove IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT\n\nJust setting IEEE80211_CONF_CHANGE_PS should be sufficient\nfor changes in the power saving things. The driver already\ntells us whether it wants notification of dynps via the\n\"have dynps support\" hw flag.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nReviewed-by: Kalle Valo \u003ckalle.valo@iki.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b9a5f8cab751d362f7c2d94899ca788c22fcd1ef", "tree": "e769e2f59ef845cf7c7cc93b64d33eeed49bb9f7", "parents": [ "9e52b0623c6eb49c3f23a326c1fb97bdecc49ba1" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Mon Apr 20 18:39:05 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:57:17 2009 -0400" }, "message": "nl80211: Add set/get for frag/rts threshold and retry limits\n\nAdd new nl80211 attributes that can be used with NL80211_CMD_SET_WIPHY\nand NL80211_CMD_GET_WIPHY to manage fragmentation/RTS threshold and\nretry limits.\n\nSince these values are stored in struct wiphy, remove the local copy\nfrom mac80211 where feasible (frag \u0026 rts threshold). The retry limits\nare currently needed in struct ieee80211_conf, but these could be\neventually removed since the driver should have access to the values\nin struct wiphy.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d323655372590c533c275b1d798f9d1221efb5c6", "tree": "7eb0e7ecb88b09cead5a36b5aa93328b199e5c25", "parents": [ "af8cdcd828ad751fae8e6cbfe94eef9f2f23b14b" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Apr 20 14:31:42 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:57:17 2009 -0400" }, "message": "cfg80211: clean up includes\n\nTrying to separate header files into net/wireless.h and\nnet/cfg80211.h has been a source of confusion. Remove\nnet/wireless.h (because there also is the linux/wireless.h)\nand subsume everything into net/cfg80211.h -- except the\ndefinitions for regulatory structures which get moved to\na new header net/regulatory.h.\n\nThe \"new\" net/cfg80211.h is now divided into sections.\n\nThere are no real changes in this patch but code shuffling\nand some very minor documentation fixes.\n\nI have also, to make things reflect reality, put in a\ncopyright line for Luis to net/regulatory.h since that\nis probably exclusively written by him but was formerly\nin a file that only had my copyright line.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nCc: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "04a773ade0680d862b479d7219973df60f7a3834", "tree": "fc759eb79099fefd7f1329bcb2b703008cb0adfe", "parents": [ "691597cb26f236ac7471f1adf925a134c86799d6" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sun Apr 19 21:24:32 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:57:17 2009 -0400" }, "message": "cfg80211/nl80211: add IBSS API\n\nThis adds IBSS API along with (preliminary) wext handlers.\nThe wext handlers can only do IBSS so you need to call them\nfrom your own wext handlers if the mode is IBSS.\n\nThe nl80211 API requires\n * an SSID\n * a channel (frequency) for the case that a new IBSS\n has to be created\n\nIt optionally supports\n * a flag to fix the channel\n * a fixed BSSID\n\nThe cfg80211 code also takes care to leave the IBSS before\nthe netdev is set down. If wireless extensions are used, it\nalso caches values when the interface is down and instructs\nthe driver to join when the interface is set up.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "691597cb26f236ac7471f1adf925a134c86799d6", "tree": "e89d91e496af082711b7c0789aaf0a985e7ba964", "parents": [ "d726405af6c8c81d2ee5e6a29301c68b9d4c574f" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sun Apr 19 19:57:45 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:57:17 2009 -0400" }, "message": "cfg80211/mac80211: move wext SIWMLME into cfg80211\n\nSince we have -\u003edeauth and -\u003edisassoc we can support the\nwext SIWMLME call directly without driver wext handlers.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "955394c98c9cb79bdb3e6b479695af3a90ea0623", "tree": "db4e8341606ecd2683ce1649ca3f0dcfd656c675", "parents": [ "bbbdff9e00449928f228867076a07bdfecd3dca8" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Apr 16 17:04:25 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:57:16 2009 -0400" }, "message": "mac80211: document powersaving/beacon filter future\n\nDocument what mac80211 will do in the future to help save power.\nWe\u0027re not quite there yet, but a plan helps. Also, while at it,\nfix the docs wrt. multicast traffic.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nReviewed-by: Kalle Valo \u003ckalle.valo@iki.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f2753ddbadb0873a98421415882318251bbd9eaa", "tree": "daad40232be13d91835b30234e5743dfdd582f19", "parents": [ "a1c555802a62c845520d2486d783c9bb1d5e68a9" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Apr 14 10:09:24 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:57:14 2009 -0400" }, "message": "mac80211: add hardware restart function\n\nSome hardware defects may require the hardware to be re-initialised\ncompletely from scratch. Drivers would need much information (for\ninstance the current MAC address, crypto keys, beaconing information,\netc.) stored duplicated from mac80211 to be able to do this, so let\nmac80211 help them.\n\nThe new ieee80211_restart_hw() function requires the same code as\nresuming, so move that code into a new ieee80211_reconfig() function\nin util.c and leave only the suspend code in pm.c.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "25e47c18ac4d8ad09c2ed4b99c1dbbcb7e3d2c51", "tree": "e224f603ceb19d7c416cd37fc4479a042ccc6890", "parents": [ "6bad8766620a3c8b64afa981502fdb543e3cfd6c" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Apr 02 20:14:06 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:54:40 2009 -0400" }, "message": "cfg80211: add cipher capabilities\n\nThis adds the necessary code and fields to let drivers specify\ntheir cipher capabilities and exports them to userspace. Also\nupdate mac80211 to export the ciphers it has.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "de95a54b1aebe5592cae971ca5e5d9ec6a381a17", "tree": "55a622d1e61e73cd6426c5e0643ac9fd117a9fe8", "parents": [ "18a8365992a8041aa178ae9ad5f0d951d0457230" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Apr 01 11:58:36 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:54:39 2009 -0400" }, "message": "mac80211: pass all probe request IEs to driver\n\nInstead of just passing the cfg80211-requested IEs, pass\nthe locally generated ones as well.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "18a8365992a8041aa178ae9ad5f0d951d0457230", "tree": "cb7a461139269feb191e5f5d03c4438cfa9335f2", "parents": [ "75c2148fa5330c6de741fc96e3308f57d846a6b4" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Mar 31 12:12:05 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:54:39 2009 -0400" }, "message": "cfg80211: introduce scan IE limit attribute\n\nThis patch introduces a new attribute for a wiphy that tells\nuserspace how long the information elements added to a probe\nrequest frame can be at most. It also updates the at76 to\nadvertise that it cannot support that, and, for now until I\ncan fix that, iwlwifi too.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "06aa7afaaa21a4e7f1bcb196bd3f29193924a603", "tree": "1337931da6e0c1e41b9f0460aea80b2a03cc7eae", "parents": [ "964c1d417e4738d359ba263921a7b9c18fa711c4" ], "author": { "name": "Jussi Kivilinna", "email": "jussi.kivilinna@mbnet.fi", "time": "Thu Mar 26 23:40:09 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:54:36 2009 -0400" }, "message": "cfg80211: add cfg80211_inform_bss\n\nAdded cfg80211_inform_bss() for full-mac devices to use.\n\nSigned-off-by: Jussi Kivilinna \u003cjussi.kivilinna@mbnet.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a3b8b0569fbef725597f05278ec58083321f6e9d", "tree": "cb3beb05c841a9564a3fdd44d540570c7b89c9f6", "parents": [ "53b46b8444f600cc1744521ea096ea0c5d494dd0" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Fri Mar 27 21:59:49 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:54:28 2009 -0400" }, "message": "nl80211: Add Michael MIC failure event\n\nDefine a new nl80211 event, NL80211_CMD_MICHAEL_MIC_FAILURE, to be\nused to notify user space about locally detected Michael MIC failures.\nThis matches with the MLME-MICHAELMICFAILURE.indication() primitive.\n\nSince we do not actually have TSC in the skb anymore when\nmac80211_ev_michael_mic_failure() is called, that function is changed\nto take in the TSC as an optional parameter instead of as a\nrequirement to include the TSC after the hdr field (which we did not\nreally follow). For now, TSC is not included in the events from\nmac80211, but it could be added at some point.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "53b46b8444f600cc1744521ea096ea0c5d494dd0", "tree": "2f9d3a465a55be2992a8f895c1d09f4cdff3c060", "parents": [ "1778092e1739155acec35a3bccee2fb8a1ae4e91" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Fri Mar 27 20:53:56 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:54:28 2009 -0400" }, "message": "nl80211: Generate deauth/disassoc event for locally generated frames\n\nPreviously, nl80211 mlme events were generated only for received\ndeauthentication and disassociation frames. We need to do the same for\nlocally generated ones in order to let applications know that we\ndisconnected (e.g., when AP does not reply to a probe). Rename the\nnl80211 and cfg80211 functions (s/rx_//) to make it clearer that they\nare used for both received and locally generated frames.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "07f62d01c1f476a3b328a44faafdfd103a4dedc3", "tree": "9e574206b85bb225f64aaab572840109bf54e71f", "parents": [ "fd7fbb17bec7b055fafec4d0ae3bfb4ed60cad8b" ], "author": { "name": "Huang Weiyi", "email": "weiyi.huang@gmail.com", "time": "Fri Mar 27 22:20:27 2009 +0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 22 16:54:28 2009 -0400" }, "message": "cfg80211: remove duplicated #include\n\nRemove duplicated #include in include/net/cfg80211.h.\n\nSigned-off-by: Huang Weiyi \u003cweiyi.huang@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a0f82f64e26929776c58a5c93c2ecb38e3d82815", "tree": "8c39812fc6fc8133cc28944e38b44c941d8fa3ce", "parents": [ "7eebb0b28f755e297d355a205bb04945b256db6b" ], "author": { "name": "Florian Westphal", "email": "fw@strlen.de", "time": "Sun Apr 19 09:43:48 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 20 02:25:26 2009 -0700" }, "message": "syncookies: remove last_synq_overflow from struct tcp_sock\n\nlast_synq_overflow eats 4 or 8 bytes in struct tcp_sock, even\nthough it is only used when a listening sockets syn queue\nis full.\n\nWe can (ab)use rx_opt.ts_recent_stamp to store the same information;\nit is not used otherwise as long as a socket is in listen state.\n\nMove linger2 around to avoid splitting struct mtu_probe\nacross cacheline boundary on 32 bit arches.\n\nSigned-off-by: Florian Westphal \u003cfw@strlen.de\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "134ffb4cad92a6aa534e55a9be145bca780a32c1", "tree": "be2b312eefbe4b38e81efb384fda4d8fdfae9943", "parents": [ "2238aff5bbd9d928b69e579b4c95842f97da95ba", "98d500d66cb7940747b424b245fc6a51ecfbf005" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 16 16:32:29 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 16 16:32:29 2009 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6\n" }, { "commit": "98d500d66cb7940747b424b245fc6a51ecfbf005", "tree": "0c5d745901be7aab151071829a8dc6fac193fb30", "parents": [ "38fb0afcd8761f8858e27135ed89a65117e2019c" ], "author": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Thu Apr 16 18:33:01 2009 +0200" }, "committer": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Thu Apr 16 18:33:01 2009 +0200" }, "message": "netfilter: nf_nat: add support for persistent mappings\n\nThe removal of the SAME target accidentally removed one feature that is\nnot available from the normal NAT targets so far, having multi-range\nmappings that use the same mapping for each connection from a single\nclient. The current behaviour is to choose the address from the range\nbased on source and destination IP, which breaks when communicating\nwith sites having multiple addresses that require all connections to\noriginate from the same IP address.\n\nIntroduce a IP_NAT_RANGE_PERSISTENT option that controls whether the\ndestination address is taken into account for selecting addresses.\n\nhttp://bugzilla.kernel.org/show_bug.cgi?id\u003d12954\n\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\n" }, { "commit": "499923c7a3254971873e55a1690d07d3700eea47", "tree": "42c5c7281d9edd02e8130ee72306a5f5d8a2f367", "parents": [ "48f6e8990858fc9a0ca7d3c9347e6774eb941dba" ], "author": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Thu Apr 09 17:37:33 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Apr 11 01:53:06 2009 -0700" }, "message": "ipv6: Fix NULL pointer dereference with time-wait sockets\n\nCommit b2f5e7cd3dee2ed721bf0675e1a1ddebb849aee6\n(ipv6: Fix conflict resolutions during ipv6 binding)\nintroduced a regression where time-wait sockets were\nnot treated correctly. This resulted in the following:\n\nBUG: unable to handle kernel NULL pointer dereference at 0000000000000062\nIP: [\u003cffffffff805d7d61\u003e] ipv4_rcv_saddr_equal+0x61/0x70\n...\nCall Trace:\n[\u003cffffffffa033847b\u003e] ipv6_rcv_saddr_equal+0x1bb/0x250 [ipv6]\n[\u003cffffffffa03505a8\u003e] inet6_csk_bind_conflict+0x88/0xd0 [ipv6]\n[\u003cffffffff805bb18e\u003e] inet_csk_get_port+0x1ee/0x400\n[\u003cffffffffa0319b7f\u003e] inet6_bind+0x1cf/0x3a0 [ipv6]\n[\u003cffffffff8056d17c\u003e] ? sockfd_lookup_light+0x3c/0xd0\n[\u003cffffffff8056ed49\u003e] sys_bind+0x89/0x100\n[\u003cffffffff80613ea2\u003e] ? trace_hardirqs_on_thunk+0x3a/0x3c\n[\u003cffffffff8020bf9b\u003e] system_call_fastpath+0x16/0x1b\n\nTested-by: Brian Haley \u003cbrian.haley@hp.com\u003e\nTested-by: Ed Tomlinson \u003cedt@aei.ca\u003e\nSigned-off-by: Vlad Yasevich \u003cvladislav.yasevich@hp.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "83731671d9e6878c0a05d309c68fb71c16d3235a", "tree": "e74df7769d32c4aad6a080796f32a7e09009a7ae", "parents": [ "3ae16f13027c26cb4c227392116c2027524a6444" ], "author": { "name": "Pablo Neira Ayuso", "email": "pablo@netfilter.org", "time": "Mon Apr 06 17:47:20 2009 +0200" }, "committer": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Mon Apr 06 17:47:20 2009 +0200" }, "message": "netfilter: ctnetlink: fix regression in expectation handling\n\nThis patch fixes a regression (introduced by myself in commit 19abb7b:\nnetfilter: ctnetlink: deliver events for conntracks changed from\nuserspace) that results in an expectation re-insertion since\n__nf_ct_expect_check() may return 0 for expectation timer refreshing.\n\nThis patch also removes a unnecessary refcount bump that\npretended to avoid a possible race condition with event delivery\nand expectation timers (as said, not needed since we hold a\nreference to the object since until we finish the expectation\nsetup). This also merges nf_ct_expect_related_report() and\nnf_ct_expect_related() which look basically the same.\n\nReported-by: Patrick McHardy \u003ckaber@trash.net\u003e\nSigned-off-by: Pablo Neira Ayuso \u003cpablo@netfilter.org\u003e\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\n" }, { "commit": "1bab88b2310998de18b32529a27ea835d164254a", "tree": "fed704a8b3b4ce93d8cd25462ccc9186dec84b7a", "parents": [ "742b11a7ec60faa25d76c95c268041ab215c25ad" ], "author": { "name": "Latchesar Ionkov", "email": "lucho@ionkov.net", "time": "Sun Apr 05 16:28:59 2009 -0500" }, "committer": { "name": "Eric Van Hensbergen", "email": "ericvh@vTrogdor.(none)", "time": "Sun Apr 05 16:54:53 2009 -0500" }, "message": "net/9p: handle correctly interrupted 9P requests\n\nCurrently the 9p code crashes when a operation is interrupted, i.e. for\nexample when the user presses ^C while reading from a file.\n\nThis patch fixes the code that is responsible for interruption and flushing\nof 9P operations.\n\nSigned-off-by: Latchesar Ionkov \u003clucho@ionkov.net\u003e\n\n" }, { "commit": "ef8a97bbc92ec07e3a07a81cc011dc549f8c7a23", "tree": "82a95f16d9236bc35a4cfd42ba8cab61981efda8", "parents": [ "4f032ac4122a77dbabf7a24b2739b2790448180f", "6c8ad3b07f7d9efdc41396db6da0aed906922701" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Apr 02 21:05:30 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Apr 02 21:05:30 2009 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (54 commits)\n glge: remove unused #include \u003cversion.h\u003e\n dnet: remove unused #include \u003cversion.h\u003e\n tcp: miscounts due to tcp_fragment pcount reset\n tcp: add helper for counter tweaking due mid-wq change\n hso: fix for the \u0027invalid frame length\u0027 messages\n hso: fix for crash when unplugging the device\n fsl_pq_mdio: Fix compile failure\n fsl_pq_mdio: Revive UCC MDIO support\n ucc_geth: Pass proper device to DMA routines, otherwise oops happens\n i.MX31: Fixing cs89x0 network building to i.MX31ADS\n tc35815: Fix build error if NAPI enabled\n hso: add Vendor/Product ID\u0027s for new devices\n ucc_geth: Remove unused header\n gianfar: Remove unused header\n kaweth: Fix locking to be SMP-safe\n net: allow multiple dev per napi with GRO\n r8169: reset IntrStatus after chip reset\n ixgbe: Fix potential memory leak/driver panic issue while setting up Tx \u0026 Rx ring parameters\n ixgbe: fix ethtool -A|a behavior\n ixgbe: Patch to fix driver panic while freeing up tx \u0026 rx resources\n ...\n" }, { "commit": "797108d134a91afca9fa59c572336b279bc66afb", "tree": "0355a88f43e16448e0126f51d7be66d953152fd5", "parents": [ "0de8ca597d7b449e9e7ce7af138944acf06c8f05" ], "author": { "name": "Ilpo Järvinen", "email": "ilpo.jarvinen@helsinki.fi", "time": "Wed Apr 01 23:15:17 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 02 16:31:44 2009 -0700" }, "message": "tcp: add helper for counter tweaking due mid-wq change\n\nWe need full-scale adjustment to fix a TCP miscount in the next\npatch, so just move it into a helper and call for that from the\nother places.\n\nSigned-off-by: Ilpo Järvinen \u003cilpo.jarvinen@helsinki.fi\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "07feee8f812f7327a46186f7604df312c8c81962", "tree": "73eac643b60532aa82d7680a7de193ba2b62eddd", "parents": [ "8651d5c0b1f874c5b8307ae2b858bc40f9f02482" ], "author": { "name": "Paul Moore", "email": "paul.moore@hp.com", "time": "Fri Mar 27 17:10:54 2009 -0400" }, "committer": { "name": "James Morris", "email": "jmorris@namei.org", "time": "Sat Mar 28 15:01:37 2009 +1100" }, "message": "netlabel: Cleanup the Smack/NetLabel code to fix incoming TCP connections\n\nThis patch cleans up a lot of the Smack network access control code. The\nlargest changes are to fix the labeling of incoming TCP connections in a\nmanner similar to the recent SELinux changes which use the\nsecurity_inet_conn_request() hook to label the request_sock and let the label\nmove to the child socket via the normal network stack mechanisms. In addition\nto the incoming TCP connection fixes this patch also removes the smk_labled\nfield from the socket_smack struct as the minor optimization advantage was\noutweighed by the difficulty in maintaining it\u0027s proper state.\n\nSigned-off-by: Paul Moore \u003cpaul.moore@hp.com\u003e\nAcked-by: Casey Schaufler \u003ccasey@schaufler-ca.com\u003e\nSigned-off-by: James Morris \u003cjmorris@namei.org\u003e\n" }, { "commit": "389fb800ac8be2832efedd19978a2b8ced37eb61", "tree": "fa0bc16050dfb491aa05f76b54fa4c167de96376", "parents": [ "284904aa79466a4736f4c775fdbe5c7407fa136c" ], "author": { "name": "Paul Moore", "email": "paul.moore@hp.com", "time": "Fri Mar 27 17:10:34 2009 -0400" }, "committer": { "name": "James Morris", "email": "jmorris@namei.org", "time": "Sat Mar 28 15:01:36 2009 +1100" }, "message": "netlabel: Label incoming TCP connections correctly in SELinux\n\nThe current NetLabel/SELinux behavior for incoming TCP connections works but\nonly through a series of happy coincidences that rely on the limited nature of\nstandard CIPSO (only able to convey MLS attributes) and the write equality\nimposed by the SELinux MLS constraints. The problem is that network sockets\ncreated as the result of an incoming TCP connection were not on-the-wire\nlabeled based on the security attributes of the parent socket but rather based\non the wire label of the remote peer. The issue had to do with how IP options\nwere managed as part of the network stack and where the LSM hooks were in\nrelation to the code which set the IP options on these newly created child\nsockets. While NetLabel/SELinux did correctly set the socket\u0027s on-the-wire\nlabel it was promptly cleared by the network stack and reset based on the IP\noptions of the remote peer.\n\nThis patch, in conjunction with a prior patch that adjusted the LSM hook\nlocations, works to set the correct on-the-wire label format for new incoming\nconnections through the security_inet_conn_request() hook. Besides the\ncorrect behavior there are many advantages to this change, the most significant\nis that all of the NetLabel socket labeling code in SELinux now lives in hooks\nwhich can return error codes to the core stack which allows us to finally get\nride of the selinux_netlbl_inode_permission() logic which greatly simplfies\nthe NetLabel/SELinux glue code. In the process of developing this patch I\nalso ran into a small handful of AF_INET6 cleanliness issues that have been\nfixed which should make the code safer and easier to extend in the future.\n\nSigned-off-by: Paul Moore \u003cpaul.moore@hp.com\u003e\nAcked-by: Casey Schaufler \u003ccasey@schaufler-ca.com\u003e\nSigned-off-by: James Morris \u003cjmorris@namei.org\u003e\n" }, { "commit": "e4e72fb4de93e3d4047a4ee3f08778422e17ed0d", "tree": "dd133a749e6fa6960c9aa708041d996110f6440e", "parents": [ "cd8ffc800ce18e558335c4946b2217864fc16045" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Mar 23 17:28:42 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:23 2009 -0400" }, "message": "mac80211/iwlwifi: move virtual A-MDPU queue bookkeeping to iwlwifi\n\nThis patch removes all the virtual A-MPDU-queue bookkeeping from\nmac80211. Curiously, iwlwifi already does its own bookkeeping, so\nit doesn\u0027t require much changes except where it needs to handle\nstarting and stopping the queues in mac80211.\n\nTo handle the queue stop/wake properly, we rewrite the software\nqueue number for aggregation frames and internally to iwlwifi keep\ntrack of the queues that map into the same AC queue, and only talk\nto mac80211 about the AC queue. The implementation requires calling\ntwo new functions, iwl_stop_queue and iwl_wake_queue instead of the\nmac80211 counterparts.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nCc: Reinette Chattre \u003creinette.chatre@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cd8ffc800ce18e558335c4946b2217864fc16045", "tree": "e9bb8c3d6011e89374f9df353ff1f15d45a63590", "parents": [ "a220858d30604902f650074bfac5a7598bc97ea4" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Mar 23 17:28:41 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:22 2009 -0400" }, "message": "mac80211: fix aggregation to not require queue stop\n\nInstead of stopping the entire AC queue when enabling aggregation\n(which was only done for hardware with aggregation queues) buffer\nthe packets for each station, and release them to the pending skb\nqueue once aggregation is turned on successfully.\n\nWe get a little more code, but it becomes conceptually simpler and\nwe can remove the entire virtual queue mechanism from mac80211 in\na follow-up patch.\n\nThis changes how mac80211 behaves towards drivers that support\naggregation but have no hardware queues -- those drivers will now\nnot be handed packets while the aggregation session is being\nestablished, but only after it has been fully established.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b1720231ca07dee3382980f3b25e6581bd2e54e9", "tree": "4258dec3d4774ee5968f181533c77766c8584b79", "parents": [ "1870cd71e87da1a1afb904f2c84086f487a07135" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Mar 23 17:28:39 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:22 2009 -0400" }, "message": "mac80211: unify and fix TX aggregation start\n\nWhen TX aggregation becomes operational, we do a number of steps:\n 1) print a debug message\n 2) wake the virtual queue\n 3) notify the driver\n\nUnfortunately, 1) and 3) are only done if the driver is first to\nreply to the aggregation request, it is, however, possible that the\nremote station replies before the driver! Thus, unify the code for\nthis and call the new function ieee80211_agg_tx_operational in both\nplaces where TX aggregation can become operational.\n\nAdditionally, rename the driver notification from\nIEEE80211_AMPDU_TX_RESUME to IEEE80211_AMPDU_TX_OPERATIONAL.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2b874e83c970b45c328ab12239b066a43505454c", "tree": "e4924ed6989f01682ec50910361b0d621dae0be4", "parents": [ "4a48e2a484e5cf99da4795cf2d6916e057d533ad" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Mar 23 14:10:22 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:15 2009 -0400" }, "message": "mac80211: rate control status only for controlled packets\n\nThis patch changes mac80211 to not notify the rate control algorithm\u0027s\ntx_status() method when reporting status for a packet that didn\u0027t go\nthrough the rate control algorithm\u0027s get_rate() method.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "04de83815993714a7ba2618f637fa1092a5f664b", "tree": "7e491e890a66a3be3e4eae9636914858a6f3bba8", "parents": [ "a08c1c1ac0c26229ca1ca45d554b209a56edc8be" ], "author": { "name": "Kalle Valo", "email": "kalle.valo@nokia.com", "time": "Sun Mar 22 21:57:35 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:13 2009 -0400" }, "message": "mac80211: add beacon filtering support\n\nAdd IEEE80211_HW_BEACON_FILTERING flag so that driver inform that it supports\nbeacon filtering. Drivers need to call the new function\nieee80211_beacon_loss() to notify about beacon loss.\n\nSigned-off-by: Kalle Valo \u003ckalle.valo@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a08c1c1ac0c26229ca1ca45d554b209a56edc8be", "tree": "b49e2968fae2612ced8a090a659309b1300fe7cb", "parents": [ "9050bdd8589c373e01e41ddbd9a192de2ff01ef0" ], "author": { "name": "Kalle Valo", "email": "kalle.valo@nokia.com", "time": "Sun Mar 22 21:57:28 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:13 2009 -0400" }, "message": "cfg80211: add feature to hold bss\n\nIn beacon filtering there needs to be a way to not expire the BSS even\nwhen no beacons are received. Add an interface to cfg80211 to hold\nBSS and make sure that it\u0027s not expired.\n\nSigned-off-by: Kalle Valo \u003ckalle.valo@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9050bdd8589c373e01e41ddbd9a192de2ff01ef0", "tree": "a33c69c570d6db96bb54bb3b4b3eb5ea4b43d5ea", "parents": [ "15b7b0629c8213905926394dc73d600e0ca250ce" ], "author": { "name": "Kalle Valo", "email": "kalle.valo@nokia.com", "time": "Sun Mar 22 21:57:21 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:12 2009 -0400" }, "message": "mac80211: disable power save when scanning\n\nWhen software scanning we need to disable power save so that all possible\nprobe responses and beacons are received. For hardware scanning assume that\nhardware will take care of that and document that assumption.\n\nSigned-off-by: Kalle Valo \u003ckalle.valo@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "65fc73ac4a310945dfeceac961726c2765ad2ec0", "tree": "5c1410524f3a82b653d6a08753fbe5bdd9a984fa", "parents": [ "feeb44454996cf5b375fad21697bf6202fe30dd2" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Fri Mar 20 21:21:16 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:04 2009 -0400" }, "message": "nl80211: Remove NL80211_CMD_SET_MGMT_EXTRA_IE\n\nThe functionality that NL80211_CMD_SET_MGMT_EXTRA_IE provided can now\nbe achieved with cleaner design by adding IE(s) into\nNL80211_CMD_TRIGGER_SCAN, NL80211_CMD_AUTHENTICATE,\nNL80211_CMD_ASSOCIATE, NL80211_CMD_DEAUTHENTICATE, and\nNL80211_CMD_DISASSOCIATE.\n\nSince this is a very recently added command and there are no known (or\nknown planned) applications using NL80211_CMD_SET_MGMT_EXTRA_IE and\ntaken into account how much extra complexity it adds to the IE\nprocessing we have now (and need to add in the future to fix IE order\nin couple of frames), it looks like the best option is to just remove\nthe implementation of this command for now. The enum values themselves\nare left to avoid changing the nl80211 command or attribute numbers.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "636a5d3625993c5ca59abc81794b9ded93cdb740", "tree": "53ee8d522153c36c631f8cb733a6e808c20ef332", "parents": [ "6039f6d23fe792d615da5449e9fa1c6b43caacf6" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Thu Mar 19 13:39:22 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:02 2009 -0400" }, "message": "nl80211: Add MLME primitives to support external SME\n\nThis patch adds new nl80211 commands to allow user space to request\nauthentication and association (and also deauthentication and\ndisassociation). The commands are structured to allow separate\nauthentication and association steps, i.e., the interface between\nkernel and user space is similar to the MLME SAP interface in IEEE\n802.11 standard and an user space application takes the role of the\nSME.\n\nThe patch introduces MLME-AUTHENTICATE.request,\nMLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and\nMLME-DISASSOCIATE.request primitives. The authentication and\nassociation commands request the actual operations in two steps\n(assuming the driver supports this; if not, separate authentication\nstep is skipped; this could end up being a separate \"connect\"\ncommand).\n\nThe initial implementation for mac80211 uses the current\nnet/mac80211/mlme.c for actual sending and processing of management\nframes and the new nl80211 commands will just stop the current state\nmachine from moving automatically from authentication to association.\nFuture cleanup may move more of the MLME operations into cfg80211.\n\nThe goal of this design is to provide more control of authentication and\nassociation process to user space without having to move the full MLME\nimplementation. This should be enough to allow IEEE 802.11r FT protocol\nand 802.11s SAE authentication to be implemented. Obviously, this will\nalso bring the extra benefit of not having to use WEXT for association\nrequests with mac80211. An example implementation of a user space SME\nusing the new nl80211 commands is available for wpa_supplicant.\n\nThis patch is enough to get IEEE 802.11r FT protocol working with\nover-the-air mechanism (over-the-DS will need additional MLME\nprimitives for handling the FT Action frames).\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6039f6d23fe792d615da5449e9fa1c6b43caacf6", "tree": "af94d1ad78ce1e82d76328ea9a67b351f0a9174b", "parents": [ "a299542e97ec1939fdca7db6d3d82c0aa9bf8b9a" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Thu Mar 19 13:39:21 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:02 2009 -0400" }, "message": "nl80211: Event notifications for MLME events\n\nAdd new nl80211 event notifications (and a new multicast group, \"mlme\")\nfor informing user space about received and processed Authentication,\n(Re)Association Response, Deauthentication, and Disassociation frames in\nstation and IBSS modes (i.e., MLME SAP interface primitives\nMLME-AUTHENTICATE.confirm, MLME-ASSOCIATE.confirm,\nMLME-REASSOCIATE.confirm, MLME-DEAUTHENTICATE.indicate, and\nMLME-DISASSOCIATE.indication). The event data is encapsulated as the 802.11\nmanagement frame since we already have the frame in that format and it\nincludes all the needed information.\n\nThis is the initial step in providing MLME SAP interface for\nauthentication and association with nl80211. In other words, kernel code\nwill act as the MLME and a user space application can control it as the\nSME.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b3a902850a8f5bc11a660051faae707f928d4bd6", "tree": "0f99f1dcd8f4baf42169aecad0fc6204eba72746", "parents": [ "a9a6ffffd05f97e6acbdeafc595e269855829751" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Mar 18 14:29:38 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:00 2009 -0400" }, "message": "mac80211: kill IEEE80211_CONF_SHORT_SLOT_TIME\n\nNo drivers use it any more, so it can now be removed safely.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "aae89831df03e5282a8f5c0ee46432cfb677fc5c", "tree": "1073ba993a206fb3df68d5addaa67eebb96068cf", "parents": [ "25420604c8967ff24f087dd7b9cd4b278567d39a" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri Mar 13 12:52:10 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:12:52 2009 -0400" }, "message": "wireless: radiotap updates\n\nRadiotap was updated to include a \"bad PLCP\" flag and standardise\nthe \"bad FCS\" flag in the \"flags\" rather than \"RX flags\" field,\nthis patch updates Linux to that standard.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "51b381479ff5bc9b8c49ce15fd8bc35c6b695ca4", "tree": "1a3a36914491900d5b68ef913eff36f7db433a40", "parents": [ "176be728ee7d32cfd33702d82c0733e51f66ab5b" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Mar 12 11:16:48 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:12:45 2009 -0400" }, "message": "mac80211: reduce max number of queues\n\nNo hw/driver actually supports more than four queues right now,\nand we allocate a number of things per queue which means we\nwaste a bit of memory. Reduce the maximum number to four to\naccurately reflect what we do (and need for QoS). Even if we\nhad hardware supporting more queues we couldn\u0027t take advantage\nof that right now anyway.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "176be728ee7d32cfd33702d82c0733e51f66ab5b", "tree": "d7b8feb17aab8da7300562ac1dff74002d5ef503", "parents": [ "14587ce2a8898de959f32dfd505b4871f09930d5" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Mar 12 23:49:28 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:12:42 2009 -0400" }, "message": "mac80211: remove ieee80211_num_regular_queues\n\nThis inline is useless and actually makes the code _longer_\nrather than shorter.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a1702857724fb39cb68ce581490010df99168fd0", "tree": "2e62d3ab16220118949fb0671500f7cfef8dd545", "parents": [ "01e6de64d9c8d0e75dca3bb4cf898db73abe00d4" ], "author": { "name": "Thierry Reding", "email": "thierry.reding@avionic-design.de", "time": "Fri Mar 27 00:12:24 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Mar 27 00:16:21 2009 -0700" }, "message": "net: Add support for the OpenCores 10/100 Mbps Ethernet MAC.\n\nThis patch adds a platform device driver that supports the OpenCores 10/100\nMbps Ethernet MAC.\n\nThe driver expects three resources: one IORESOURCE_MEM resource defines the\nmemory region for the core\u0027s memory-mapped registers while a second\nIORESOURCE_MEM resource defines the network packet buffer space. The third\nresource, of type IORESOURCE_IRQ, associates an interrupt with the driver.\n\nSigned-off-by: Thierry Reding \u003cthierry.reding@avionic-design.de\u003e\nAcked-by: Florian Fainelli \u003cflorian@openwrt.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "01e6de64d9c8d0e75dca3bb4cf898db73abe00d4", "tree": "925982e6241e5ac47f268bc2c2942ab0f06775cd", "parents": [ "8f1ead2d1a626ed0c85b3d2c2046a49081d5933f", "d271e8bd8c60ce059ee36d836ba063cfc61c3e21" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Mar 26 22:45:23 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Mar 26 22:45:23 2009 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6\n" }, { "commit": "5c0de29d06318ec8f6e3ba0d17d62529dbbdc1e8", "tree": "8759b27ec098844301343376b600b6ec47b3886f", "parents": [ "2732c4e45bb67006fdc9ae6669be866762711ab5" ], "author": { "name": "Holger Eitzenberger", "email": "holger@eitzenberger.org", "time": "Wed Mar 25 21:52:17 2009 +0100" }, "committer": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Wed Mar 25 21:52:17 2009 +0100" }, "message": "netfilter: nf_conntrack: add generic function to get len of generic policy\n\nUsefull for all protocols which do not add additional data, such\nas GRE or UDPlite.\n\nSigned-off-by: Holger Eitzenberger \u003cholger@eitzenberger.org\u003e\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\n" }, { "commit": "ea781f197d6a835cbb93a0bf88ee1696296ed8aa", "tree": "820fe7df1199d8bb6c793e664e480ea56ecf612e", "parents": [ "1f9352ae2253a97b07b34dcf16ffa3b4ca12c558" ], "author": { "name": "Eric Dumazet", "email": "dada1@cosmosbay.com", "time": "Wed Mar 25 21:05:46 2009 +0100" }, "committer": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Wed Mar 25 21:05:46 2009 +0100" }, "message": "netfilter: nf_conntrack: use SLAB_DESTROY_BY_RCU and get rid of call_rcu()\n\nUse \"hlist_nulls\" infrastructure we added in 2.6.29 for RCUification of UDP \u0026 TCP.\n\nThis permits an easy conversion from call_rcu() based hash lists to a\nSLAB_DESTROY_BY_RCU one.\n\nAvoiding call_rcu() delay at nf_conn freeing time has numerous gains.\n\nFirst, it doesnt fill RCU queues (up to 10000 elements per cpu).\nThis reduces OOM possibility, if queued elements are not taken into account\nThis reduces latency problems when RCU queue size hits hilimit and triggers\nemergency mode.\n\n- It allows fast reuse of just freed elements, permitting better use of\nCPU cache.\n\n- We delete rcu_head from \"struct nf_conn\", shrinking size of this structure\nby 8 or 16 bytes.\n\nThis patch only takes care of \"struct nf_conn\".\ncall_rcu() is still used for less critical conntrack parts, that may\nbe converted later if necessary.\n\nSigned-off-by: Eric Dumazet \u003cdada1@cosmosbay.com\u003e\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\n" }, { "commit": "af9d32ad6718b9a80fa89f557cc1fbb63a93ec15", "tree": "fad7f7ccd2bc6fc8a04972f520dd8eedf257967e", "parents": [ "e487eb99cf9381a4f8254fa01747a85818da612b" ], "author": { "name": "Holger Eitzenberger", "email": "holger@eitzenberger.org", "time": "Wed Mar 25 18:44:01 2009 +0100" }, "committer": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Wed Mar 25 18:44:01 2009 +0100" }, "message": "netfilter: limit the length of the helper name\n\nThis is necessary in order to have an upper bound for Netlink\nmessage calculation, which is not a problem at all, as there\nare no helpers with a longer name.\n\nSigned-off-by: Holger Eitzenberger \u003cholger@eitzenberger.org\u003e\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\n" }, { "commit": "e487eb99cf9381a4f8254fa01747a85818da612b", "tree": "2381e552d88063982bea03a16db942ebcc295fc2", "parents": [ "d0dba7255b541f1651a88e75ebdb20dd45509c2f" ], "author": { "name": "Holger Eitzenberger", "email": "holger@eitzenberger.org", "time": "Wed Mar 25 18:26:30 2009 +0100" }, "committer": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Wed Mar 25 18:26:30 2009 +0100" }, "message": "netlink: add nla_policy_len()\n\nIt calculates the max. length of a Netlink policy, which is usefull\nfor allocating Netlink buffers roughly the size of the actual\nmessage.\n\nSigned-off-by: Holger Eitzenberger \u003cholger@eitzenberger.org\u003e\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\n" }, { "commit": "d0dba7255b541f1651a88e75ebdb20dd45509c2f", "tree": "db731388062d6b81e73bc9328fdd29e6eb81c509", "parents": [ "b8dfe498775de912116f275680ddb57c8799d9ef" ], "author": { "name": "Holger Eitzenberger", "email": "holger@eitzenberger.org", "time": "Wed Mar 25 18:24:48 2009 +0100" }, "committer": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Wed Mar 25 18:24:48 2009 +0100" }, "message": "netfilter: ctnetlink: add callbacks to the per-proto nlattrs\n\nThere is added a single callback for the l3 proto helper. The two\ncallbacks for the l4 protos are necessary because of the general\nstructure of a ctnetlink event, which is in short:\n\n CTA_TUPLE_ORIG\n \u003cl3/l4-proto-attributes\u003e\n CTA_TUPLE_REPLY\n \u003cl3/l4-proto-attributes\u003e\n CTA_ID\n ...\n CTA_PROTOINFO\n \u003cl4-proto-attributes\u003e\n CTA_TUPLE_MASTER\n \u003cl3/l4-proto-attributes\u003e\n\nTherefore the formular is\n\n size :\u003d sizeof(generic-nlas) + 3 * sizeof(tuple_nlas) + sizeof(protoinfo_nlas)\n\nSome of the NLAs are optional, e. g. CTA_TUPLE_MASTER, which is only\nset if it\u0027s an expected connection. But the number of optional NLAs is\nsmall enough to prevent netlink_trim() from reallocating if calculated\nproperly.\n\nSigned-off-by: Holger Eitzenberger \u003cholger@eitzenberger.org\u003e\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\n" }, { "commit": "67fca028f1535e510689d2e444b0289e264e05c1", "tree": "8df26ed8bc025eb32e16b97adf9242e1c2b76cdb", "parents": [ "47cb035560a41bd1bd3db506eeab93088815203e" ], "author": { "name": "Daniel Mack", "email": "daniel@caiaq.de", "time": "Tue Mar 24 23:32:03 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Mar 24 23:32:03 2009 -0700" }, "message": "ax88796: Add method to take MAC from platform data\n\nImplement a way to provide the MAC address for ax88796 devices from\ntheir platform data. Boards might decide to set the address\nprogrammatically, taken from boot tags or other sources.\n\nSigned-off-by: Daniel Mack \u003cdaniel@caiaq.de\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n\n" }, { "commit": "b2f5e7cd3dee2ed721bf0675e1a1ddebb849aee6", "tree": "a7b48c260a3cb0050ad6198c6a50b52b318dfcb8", "parents": [ "63d9950b08184e6531adceb65f64b429909cc101" ], "author": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Tue Mar 24 16:24:51 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Mar 24 19:49:11 2009 -0700" }, "message": "ipv6: Fix conflict resolutions during ipv6 binding\n\nThe ipv6 version of bind_conflict code calls ipv6_rcv_saddr_equal()\nwhich at times wrongly identified intersections between addresses.\nIt particularly broke down under a few instances and caused erroneous\nbind conflicts.\n\nSigned-off-by: Vlad Yasevich \u003cvladislav.yasevich@hp.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "b5bb14386eabcb4229ade2bc0a2b237ca166d37d", "tree": "1966e65479f0d12cec0a204443a95b8eb57946db", "parents": [ "bb4f92b3a33bfc31f55098da85be44702bea2d16", "1d45209d89e647e9f27e4afa1f47338df73bc112" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Mar 24 13:24:36 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Mar 24 13:24:36 2009 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6\n" }, { "commit": "e84665c9cb4db963393fafad6fefe5efdd7e4a09", "tree": "545c4a2a63a77b853e3f34609d86b346fe61baf4", "parents": [ "076d3e10a54caa2c148de5732c126c7a31381d48" ], "author": { "name": "Lennert Buytenhek", "email": "buytenh@wantstofly.org", "time": "Fri Mar 20 09:52:09 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Mar 21 19:06:54 2009 -0700" }, "message": "dsa: add switch chip cascading support\n\nThe initial version of the DSA driver only supported a single switch\nchip per network interface, while DSA-capable switch chips can be\ninterconnected to form a tree of switch chips. This patch adds support\nfor multiple switch chips on a network interface.\n\nAn example topology for a 16-port device with an embedded CPU is as\nfollows:\n\n\t+-----+ +--------+ +--------+\n\t| |eth0 10| switch |9 10| switch |\n\t| CPU +----------+ +-------+ |\n\t| | | chip 0 | | chip 1 |\n\t+-----+ +---++---+ +---++---+\n\t || ||\n\t || ||\n\t ||1000baseT ||1000baseT\n\t ||ports 1-8 ||ports 9-16\n\nThis requires a couple of interdependent changes in the DSA layer:\n\n- The dsa platform driver data needs to be extended: there is still\n only one netdevice per DSA driver instance (eth0 in the example\n above), but each of the switch chips in the tree needs its own\n mii_bus device pointer, MII management bus address, and port name\n array. (include/net/dsa.h) The existing in-tree dsa users need\n some small changes to deal with this. (arch/arm)\n\n- The DSA and Ethertype DSA tagging modules need to be extended to\n use the DSA device ID field on receive and demultiplex the packet\n accordingly, and fill in the DSA device ID field on transmit\n according to which switch chip the packet is heading to.\n (net/dsa/tag_{dsa,edsa}.c)\n\n- The concept of \"CPU port\", which is the switch chip port that the\n CPU is connected to (port 10 on switch chip 0 in the example), needs\n to be extended with the concept of \"upstream port\", which is the\n port on the switch chip that will bring us one hop closer to the CPU\n (port 10 for both switch chips in the example above).\n\n- The dsa platform data needs to specify which ports on which switch\n chips are links to other switch chips, so that we can enable DSA\n tagging mode on them. (For inter-switch links, we always use\n non-EtherType DSA tagging, since it has lower overhead. The CPU\n link uses dsa or edsa tagging depending on what the \u0027root\u0027 switch\n chip supports.) This is done by specifying \"dsa\" for the given\n port in the port array.\n\n- The dsa platform data needs to be extended with information on via\n which port to reach any given switch chip from any given switch chip.\n This info is specified via the per-switch chip data struct -\u003ertable[]\n array, which gives the nexthop ports for each of the other switches\n in the tree.\n\nFor the example topology above, the dsa platform data would look\nsomething like this:\n\n\tstatic struct dsa_chip_data sw[2] \u003d {\n\t\t{\n\t\t\t.mii_bus\t\u003d \u0026foo,\n\t\t\t.sw_addr\t\u003d 1,\n\t\t\t.port_names[0]\t\u003d \"p1\",\n\t\t\t.port_names[1]\t\u003d \"p2\",\n\t\t\t.port_names[2]\t\u003d \"p3\",\n\t\t\t.port_names[3]\t\u003d \"p4\",\n\t\t\t.port_names[4]\t\u003d \"p5\",\n\t\t\t.port_names[5]\t\u003d \"p6\",\n\t\t\t.port_names[6]\t\u003d \"p7\",\n\t\t\t.port_names[7]\t\u003d \"p8\",\n\t\t\t.port_names[9]\t\u003d \"dsa\",\n\t\t\t.port_names[10]\t\u003d \"cpu\",\n\t\t\t.rtable\t\t\u003d (s8 []){ -1, 9, },\n\t\t}, {\n\t\t\t.mii_bus\t\u003d \u0026foo,\n\t\t\t.sw_addr\t\u003d 2,\n\t\t\t.port_names[0]\t\u003d \"p9\",\n\t\t\t.port_names[1]\t\u003d \"p10\",\n\t\t\t.port_names[2]\t\u003d \"p11\",\n\t\t\t.port_names[3]\t\u003d \"p12\",\n\t\t\t.port_names[4]\t\u003d \"p13\",\n\t\t\t.port_names[5]\t\u003d \"p14\",\n\t\t\t.port_names[6]\t\u003d \"p15\",\n\t\t\t.port_names[7]\t\u003d \"p16\",\n\t\t\t.port_names[10]\t\u003d \"dsa\",\n\t\t\t.rtable\t\t\u003d (s8 []){ 10, -1, },\n\t\t},\n\t},\n\n\tstatic struct dsa_platform_data pd \u003d {\n\t\t.netdev\t\t\u003d \u0026foo,\n\t\t.nr_switches\t\u003d 2,\n\t\t.sw\t\t\u003d sw,\n\t};\n\nSigned-off-by: Lennert Buytenhek \u003cbuytenh@marvell.com\u003e\nTested-by: Gary Thomas \u003cgary@mlbassoc.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "7ca98fa234afa096ec2a5e7195ad2d32555cca86", "tree": "2c54b7eb083de1d1f2d57faa73e690aa2ea202d9", "parents": [ "65689fef7e484631e996541a6772706627b0991a" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@linux-foundation.org", "time": "Fri Mar 20 05:43:14 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Mar 21 19:06:50 2009 -0700" }, "message": "snap: use const for descriptor\n\nProtocols should be able to use constant value for the descriptor.\nMinor whitespace cleanup as well\n\nSigned-off-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nAcked-by: Arnaldo Carvalho de Melo \u003cacme@redhat.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "8d2f9e81169b8120cf2b4872930ae491b17c27b8", "tree": "851d3cbb29052ae57f11eca4e6baa2b8dfbd3d38", "parents": [ "09a3b1f8b1af7220fd7a3caf18e6841a7f5a6c6e" ], "author": { "name": "Vlad Yasevich", "email": "vladislav.yasevich@hp.com", "time": "Sat Mar 21 13:41:09 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Mar 21 13:41:09 2009 -0700" }, "message": "sctp: Clean up TEST_FRAME hacks.\n\nRemove 2 TEST_FRAME hacks that are no longer needed. These allowed\nsctp regression tests to compile before, but are no longer needed.\n\nSigned-off-by: Vlad Yasevich \u003cvladislav.yasevich@hp.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "04ec5cfcfd9a69c16fc8adb9d7f4836eedb84e53", "tree": "0961b478a7638bafef6aae97e40838216445e6bf", "parents": [ "29ded5f76ce3c41f43b64643b074b7c9c9ebd925" ], "author": { "name": "Richard Kennedy", "email": "richard@rsk.demon.co.uk", "time": "Sat Mar 21 13:29:05 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Mar 21 13:29:05 2009 -0700" }, "message": "ipv6: reorder struct inet6_ifaddr to remove padding on 64 bit builds\n\nreorder struct inet6_ifaddr to remove padding on 64 bit builds\n \nremove 8 bytes of padding so inet6_ifaddr becomes 192 bytes \u0026 fits into\na smaller slab.\n \nSigned-off-by: Richard Kennedy \u003crichard@rsk.demon.co.uk\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5e140dfc1fe87eae27846f193086724806b33c7d", "tree": "a38240220f71ac128576cd8f432248442bac2deb", "parents": [ "408896d508794c98a2ac6b6e1dcd7a4888a4d32b" ], "author": { "name": "Eric Dumazet", "email": "dada1@cosmosbay.com", "time": "Fri Mar 20 01:33:32 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Mar 20 01:33:32 2009 -0700" }, "message": "net: reorder struct Qdisc for better SMP performance\n\ndev_queue_xmit() needs to dirty fields \"state\", \"q\", \"bstats\" and \"qstats\"\n\nOn x86_64 arch, they currently span three cache lines, involving more\ncache line ping pongs than necessary, making longer holding of queue spinlock.\n\nWe can reduce this to one cache line, by grouping all read-mostly fields\nat the beginning of structure. (Or should I say, all highly modified fields\nat the end :) )\n\nBefore patch :\n\noffsetof(struct Qdisc, state)\u003d0x38\noffsetof(struct Qdisc, q)\u003d0x48\noffsetof(struct Qdisc, bstats)\u003d0x80\noffsetof(struct Qdisc, qstats)\u003d0x90\nsizeof(struct Qdisc)\u003d0xc8\n\nAfter patch :\n\noffsetof(struct Qdisc, state)\u003d0x80\noffsetof(struct Qdisc, q)\u003d0x88\noffsetof(struct Qdisc, bstats)\u003d0xa0\noffsetof(struct Qdisc, qstats)\u003d0xac\nsizeof(struct Qdisc)\u003d0xc0\n\nSigned-off-by: Eric Dumazet \u003cdada1@cosmosbay.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "711d60a9e7f88e394ccca10f5fc83f95f0cea5b1", "tree": "0ee2cb8996f97df224036c3825a68c9550080a5d", "parents": [ "cd91566e4bdbcb8841385e4b2eacc8d0c29c9208" ], "author": { "name": "Florian Westphal", "email": "fw@strlen.de", "time": "Wed Mar 18 17:30:50 2009 +0100" }, "committer": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Wed Mar 18 17:30:50 2009 +0100" }, "message": "netfilter: remove nf_ct_l4proto_find_get/nf_ct_l4proto_put\n\nusers have been moved to __nf_ct_l4proto_find.\n\nSigned-off-by: Florian Westphal \u003cfw@strlen.de\u003e\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\n" }, { "commit": "af4330631cd48987755f1a8d324dc318f60cf16b", "tree": "3c9233e81b450921326da13a7f8abacb58ab1f5e", "parents": [ "2d6a5e9500103680464a723a4564961675652680", "808ff697b357cee54e214efd27921a9ec6461a94" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Mar 17 15:04:31 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Mar 17 15:04:31 2009 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n" }, { "commit": "2d6a5e9500103680464a723a4564961675652680", "tree": "d18903333aae8a4415b179d6e7d38f203724892c", "parents": [ "bd257ed9f1d129b4e881f513a406b435c8852565", "f10023a4ef3f5cc05457b059c6880bc447adfa1f" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Mar 17 15:01:30 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Mar 17 15:01:30 2009 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\tdrivers/net/igb/igb_main.c\n\tdrivers/net/qlge/qlge_main.c\n\tdrivers/net/wireless/ath9k/ath9k.h\n\tdrivers/net/wireless/ath9k/core.h\n\tdrivers/net/wireless/ath9k/hw.c\n" }, { "commit": "4ada8107f465b97326751de66d3c11ed78bf8214", "tree": "c25db4b4b8f9297b61d357b6df33ca106901f84f", "parents": [ "303c6a0251852ecbdc5c15e466dcaff5971f7517", "d1238d5337e8e53cddea77c2a26d26b6eb5a982f" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Mar 17 13:12:47 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Mar 17 13:12:47 2009 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6\n" }, { "commit": "7db90f4a25bd4184f3d36dfa4f512f53b0448da7", "tree": "839b8103801cac9342763e1b62e84730a8050ccc", "parents": [ "0fee54cab7d5ebc58fad8c6a0703c4ea016405e3" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Mon Mar 09 22:07:41 2009 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Mar 16 18:09:40 2009 -0400" }, "message": "cfg80211: move enum reg_set_by to nl80211.h\n\nWe do this so we can later inform userspace who set the\nregulatory domain and provide details of the request.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0fee54cab7d5ebc58fad8c6a0703c4ea016405e3", "tree": "907bc65b4dc54778f5c3281287d7610b73a4a95c", "parents": [ "1a28c78b46caec7628985728e7f0c4aef68e33e7" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Mon Mar 09 22:07:40 2009 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Mar 16 18:09:39 2009 -0400" }, "message": "cfg80211: remove REGDOM_SET_BY_INIT\n\nThis is not used as we can always just assume the first\nregulatory domain set will _always_ be a static regulatory\ndomain. REGDOM_SET_BY_CORE will be the first request from\ncfg80211 for a regdomain and that then populates the first\nregulatory request.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9d2493f88f846b391a15a736efc7f4b97d6c4046", "tree": "8d7025710d0d89fcd9153821075119569035ee2e", "parents": [ "c7a913cd5535554d6f5d5e1f5ef46c4307cf2afc" ], "author": { "name": "Christoph Paasch", "email": "christoph.paasch@gmail.com", "time": "Mon Mar 16 15:15:35 2009 +0100" }, "committer": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Mon Mar 16 15:15:35 2009 +0100" }, "message": "netfilter: remove IPvX specific parts from nf_conntrack_l4proto.h\n\nMoving the structure definitions to the corresponding IPvX specific header files.\n\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\n" }, { "commit": "b1e93a68ca41e7e73766f95ba32ca05cf9052e15", "tree": "6ace3ccb810bda4e3f5bc9bd20b103a53c97bb46", "parents": [ "325fb5b4d26038cba665dd0d8ee09555321061f0" ], "author": { "name": "Pablo Neira Ayuso", "email": "pablo@netfilter.org", "time": "Mon Mar 16 15:06:42 2009 +0100" }, "committer": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Mon Mar 16 15:06:42 2009 +0100" }, "message": "netfilter: conntrack: don\u0027t deliver events for racy packets\n\nThis patch skips the delivery of conntrack events if the packet\nwas drop due to a race condition in the conntrack insertion.\n\nSigned-off-by: Pablo Neira Ayuso \u003cpablo@netfilter.org\u003e\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\n" }, { "commit": "ca735b3aaa945626ba65a3e51145bfe4ecd9e222", "tree": "5fe88e398080a1287fefc10a8bbc54f7eb8c99ba", "parents": [ "28337ff5438a640afa713d874d076e3a8a9150da" ], "author": { "name": "Eric Leblond", "email": "eric@inl.fr", "time": "Mon Mar 16 14:54:21 2009 +0100" }, "committer": { "name": "Patrick McHardy", "email": "kaber@trash.net", "time": "Mon Mar 16 14:54:21 2009 +0100" }, "message": "netfilter: use a linked list of loggers\n\nThis patch modifies nf_log to use a linked list of loggers for each\nprotocol. This list of loggers is read and write protected with a\nmutex.\n\nThis patch separates registration and binding. To be used as\nlogging module, a module has to register calling nf_log_register()\nand to bind to a protocol it has to call nf_log_bind_pf().\nThis patch also converts the logging modules to the new API. For nfnetlink_log,\nit simply switchs call to register functions to call to bind function and\nadds a call to nf_log_register() during init. For other modules, it just\nremove a const flag from the logger structure and replace it with a\n__read_mostly.\n\nSigned-off-by: Eric Leblond \u003ceric@inl.fr\u003e\nSigned-off-by: Patrick McHardy \u003ckaber@trash.net\u003e\n" } ], "next": "0c54b85f2828128274f319a1eb3ce7f604fe2a53" }