)]}' { "log": [ { "commit": "a04caaa347b2d096b3a8c667febbce3ff64de5d0", "tree": "f6bed6e4f0fdd810925693723721943da17d0b0f", "parents": [ "2009fe63c80e1786495ebc96c32dddd1bf1e0485" ], "author": { "name": "Jin Hong", "email": "jinh@codeaurora.org", "time": "Wed May 23 10:28:27 2012 -0700" }, "committer": { "name": "Sagar Dharia", "email": "sdharia@codeaurora.org", "time": "Thu May 31 18:50:29 2012 -0600" }, "message": "msm: copper: enable i2c(BLSP11) on RUMI\n\ni2c is supported in RUMI on BLSP11. Device tree support is added\nfor the same. Corresponding GPIOs are initialized as well.\n\nChange-Id: I62765f0a839af86ed3e2b3f7a01bc541bb698745\nSigned-off-by: Jin Hong \u003cjinh@codeaurora.org\u003e\nSigned-off-by: Sagar Dharia \u003csdharia@codeaurora.org\u003e\n" }, { "commit": "2009fe63c80e1786495ebc96c32dddd1bf1e0485", "tree": "301dbeabb1d790811576c7e3dd358b20a39a5886", "parents": [ "20e2883131a511621cad8f658c31b2353aba1101", "772e453eb3ae319ceb8ef8e1df960fb41661b103" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 09:35:14 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 09:35:14 2012 -0700" }, "message": "Merge \"msm: camera: add check for null queue pointer\" into msm-3.0" }, { "commit": "20e2883131a511621cad8f658c31b2353aba1101", "tree": "5146cad2ebb0818eccc0f454cb9af32dc0ffa19d", "parents": [ "6ac284ba3761fd464c19067c82a54202883387cd", "6ed700bd44a8244be0abd619f3ca77c6d1add3b8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 09:35:11 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 09:35:11 2012 -0700" }, "message": "Merge \"PRNG: defconfig: Enable PRNG\" into msm-3.0" }, { "commit": "6ac284ba3761fd464c19067c82a54202883387cd", "tree": "a5e296589a806290a30cdec8e2accb5f803a8728", "parents": [ "f6b82acb7cfcb5af5ecfbf5a9c7afac08ed27615", "85c95406680ce1a959a9b8cdb5aff7afcd699038" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 09:35:09 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 09:35:09 2012 -0700" }, "message": "Merge changes Idb51bf73,Ida0c539b into msm-3.0\n\n* changes:\n gpu: ion: Use standard cache routines\n msm: memory: Use standard cache routines\n" }, { "commit": "f6b82acb7cfcb5af5ecfbf5a9c7afac08ed27615", "tree": "7da87d46a0a337a784feb9503d17c6d55bc0dfd7", "parents": [ "cba6bf0b3725e9e28d4b9faeab01d905693a037a", "968c774ea6466fa7adbf2eac333220132acda306" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 09:35:04 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 09:35:04 2012 -0700" }, "message": "Merge \"mmc: core: Support packed write command for eMMC4.5 device\" into msm-3.0" }, { "commit": "cba6bf0b3725e9e28d4b9faeab01d905693a037a", "tree": "6f77321e54f13827029527d5904973609da2c0a3", "parents": [ "82ca884fc0215a99a4080507ace091ff4c03b207", "e653c2b3b7b2edce42105c6aea8d873bba123c78" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 09:35:03 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 09:35:03 2012 -0700" }, "message": "Merge \"msm: ocmem: Fix a possible uninitialized variable warning.\" into msm-3.0" }, { "commit": "82ca884fc0215a99a4080507ace091ff4c03b207", "tree": "b1cfed4b0af9758595e6ef9f57183cfe79f01262", "parents": [ "0175ec415430417010d250d155cf576eeb2e7ad1", "3a57e77b207d310197a28502496769bde1691803" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 09:35:01 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 09:35:01 2012 -0700" }, "message": "Merge \"msm: 8064: allocate memory regions for MPQ_HRD and MPQ_DTV\" into msm-3.0" }, { "commit": "0175ec415430417010d250d155cf576eeb2e7ad1", "tree": "77f3a4ae219a04d9b5993f0300984f8de29e2e0c", "parents": [ "b1a26c25c8a1de85849fb0ac237d94ba44a624f7", "5c2f7ecbcda804f2b241ff6a8efa3a48593b74e3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 09:35:00 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 09:35:00 2012 -0700" }, "message": "Merge \"msm: msm_bus: Add Copper specific Master/Slave IDs\" into msm-3.0" }, { "commit": "b1a26c25c8a1de85849fb0ac237d94ba44a624f7", "tree": "2146f84fc4e82c4c51aa3bf3f02cb031110e3b7b", "parents": [ "d2eeeb7ea0fb087169c3a6163e9af27e8b6b1a54", "136fbcf233893186369f20472ae0af9d791e0ad3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 09:34:58 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 09:34:58 2012 -0700" }, "message": "Merge \"msm: copper: Temporarily stub out bus arbitration for copper\" into msm-3.0" }, { "commit": "d2eeeb7ea0fb087169c3a6163e9af27e8b6b1a54", "tree": "39f6e2f121f9758f8c0f17624335eb509c405473", "parents": [ "d847a8b0bd8b4cde65ec3c177f5ee45ecf86d9ef", "5a6d7d66aa937535a49bad7131534429a9fae657" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 09:34:57 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 09:34:57 2012 -0700" }, "message": "Merge \"tz: Change the names of the APIs used for tz in copper\" into msm-3.0" }, { "commit": "d847a8b0bd8b4cde65ec3c177f5ee45ecf86d9ef", "tree": "bc50f04b87a0fc6773229edd8433447427ce16ea", "parents": [ "da3c70545bdca4bf8ba18202df4083255621da4f", "47a999a014be19b99bca20d58d96bcded23facbe" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 09:34:53 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 09:34:53 2012 -0700" }, "message": "Merge \"msm: msm_bus: Abstract RPM layer for copper\" into msm-3.0" }, { "commit": "da3c70545bdca4bf8ba18202df4083255621da4f", "tree": "33cb38bc8d5c1da59d217d2d5503fa15a48a6fe5", "parents": [ "014af3d9509a1d051add2038b5db5ce11250b358", "e2ebe3cc6bce4609a73b3b7afd7fac7a3343c021" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 06:21:31 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 06:21:31 2012 -0700" }, "message": "Merge \"msm: smsm: Add new SMSM bit definition\" into msm-3.0" }, { "commit": "014af3d9509a1d051add2038b5db5ce11250b358", "tree": "4063cc7efc818bd601279b0bc16cffbdf8ef87f6", "parents": [ "50f835c07db2ff6e138c886e8096b4fbab67ce7c", "d853d13f67f97f88740520fb3b62cab85babce66" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 06:21:28 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 06:21:28 2012 -0700" }, "message": "Merge changes I50df66a8,Ic05f496b into msm-3.0\n\n* changes:\n media: dvb: Add MPQ documentation\n media: dvb: mpq: Support get-capabilities API\n" }, { "commit": "50f835c07db2ff6e138c886e8096b4fbab67ce7c", "tree": "3e5206753bcd9cec39705c27d4a81b22dceaed54", "parents": [ "bfdffd0e0f0dff708215c067b2ed3a1c82124396", "4ed4ad8e6c785cc221ac416f1ed18de0d8d337b3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 06:21:26 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 06:21:26 2012 -0700" }, "message": "Merge \"msm: board-8x60: Add RTB support\" into msm-3.0" }, { "commit": "bfdffd0e0f0dff708215c067b2ed3a1c82124396", "tree": "5fb06463b8b7b7bba4fc4f0cff4c79930f3b73e3", "parents": [ "9e0929f6dc6bc4d2f47ed8d9961c2912c7704ede", "94d07c3e3d2604777d40ec5d6a2d04dbb105793a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 06:21:18 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 06:21:18 2012 -0700" }, "message": "Merge \"msm: camera: Fix for ZSL issue\" into msm-3.0" }, { "commit": "9e0929f6dc6bc4d2f47ed8d9961c2912c7704ede", "tree": "113ef7faf091a92ea3adeb642b49608a8fe1c5cd", "parents": [ "f461abd8417b2f416ee9dfebef483c1450052398", "e65fa41f121530474633a18dbce8f201b420f679" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 06:21:08 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 06:21:08 2012 -0700" }, "message": "Merge \"ASoC: msm: Add supplementary service for VoLTE and voice call.\" into msm-3.0" }, { "commit": "f461abd8417b2f416ee9dfebef483c1450052398", "tree": "bfd270b66f2f521e4c1d6bb74990ebb95b3e081c", "parents": [ "1c4ca956f997c6c977ad577db79ef7c088fdc98b", "2e3168f2b7c1efc95fc2f160cb5ef9b7d38319d5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 03:38:25 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 03:38:25 2012 -0700" }, "message": "Merge \"ASOC: msm: Add native audio driver support.\" into msm-3.0" }, { "commit": "1c4ca956f997c6c977ad577db79ef7c088fdc98b", "tree": "607ba409071db6268ac5b6d7d6b3bb5947e1a4e9", "parents": [ "887d8ad7144bce3a223e75f170c6bb3c768a22fd", "749260c35e01eb9d3395c8feeb42db0c3a9ce5d1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 03:38:20 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 03:38:20 2012 -0700" }, "message": "Merge \"msm: Disable Dynamic memory management\" into msm-3.0" }, { "commit": "887d8ad7144bce3a223e75f170c6bb3c768a22fd", "tree": "29e93180a0006d91ba1f0dc4596ee32e87e3d9bb", "parents": [ "f42fbb404ace79deb192b7f24105ca0f63c97281", "5b1e6f1afb70ace03b32b48d4d70f34302decdc2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 03:38:15 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 03:38:15 2012 -0700" }, "message": "Merge \"msm: camera: Remove subsystem_map header\" into msm-3.0" }, { "commit": "3a57e77b207d310197a28502496769bde1691803", "tree": "8fb713a40ed3585104148b7bbdf3b06158d2ccb2", "parents": [ "f42fbb404ace79deb192b7f24105ca0f63c97281" ], "author": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Mon May 28 11:22:55 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 03:17:33 2012 -0600" }, "message": "msm: 8064: allocate memory regions for MPQ_HRD and MPQ_DTV\n\nFrame buffer memory allocation was not included for\nthese targets in the 8064 board file.\n\nChange-Id: I99aa69434dc02b772808de247457ae971a785da0\nSigned-off-by: Joel King \u003cjoelking@codeaurora.org\u003e\n" }, { "commit": "f42fbb404ace79deb192b7f24105ca0f63c97281", "tree": "dcf638ee3a223bed47ab25de4e6a6a31b2666f47", "parents": [ "f74d46680a870c02b9076f4d8caa6539a0e4676d", "9f36ce34dc0e6f840c6198430adfb44142d91f4b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 02:01:18 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 02:01:18 2012 -0700" }, "message": "Merge \"msm_fb: display: Register MDP fault handler with IOMMU driver.\" into msm-3.0" }, { "commit": "f74d46680a870c02b9076f4d8caa6539a0e4676d", "tree": "0ac5b6b5f8a19de0af20dcd00779fd1e8e7ce8b6", "parents": [ "4ecd5b8327d6fd02c88114227513bd8fcc2a3af8", "1c2c832b3fe89cc7e44c9662fe73795417c3e39b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 02:01:16 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 02:01:16 2012 -0700" }, "message": "Merge \"msm: camera: Change OV2720 sensor register setting\" into msm-3.0" }, { "commit": "4ecd5b8327d6fd02c88114227513bd8fcc2a3af8", "tree": "783dc0628cad68b61d88324a7783081fc72f14e9", "parents": [ "0e70397c592d662515ce345af2dfefc1b7440b4f", "2e1d752be81c1eee283738ffa21afb179ae1cc1d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 02:01:15 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 02:01:15 2012 -0700" }, "message": "Merge \"ASoC: wcd9304: Fix wrong sample rate issue in RX2/RX3 channels\" into msm-3.0" }, { "commit": "0e70397c592d662515ce345af2dfefc1b7440b4f", "tree": "65ce9ba90ed5c798db28d3fd7ac566ed5388426d", "parents": [ "2097c9e2333cedb7d0fdeea8399ba3611691b8ce", "20b7db95ed48e4aaecbba669f1e57328499d0ea7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 02:01:13 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 02:01:13 2012 -0700" }, "message": "Merge \"msm: clock-copper: Correct the prng clock lookup entry\" into msm-3.0" }, { "commit": "2097c9e2333cedb7d0fdeea8399ba3611691b8ce", "tree": "dbe292929454b92e4a35435239baba0699ab4684", "parents": [ "03bbfdade61daaa932abb4f2b998b9feb2380289", "b607a109cbb7093da12cef6a3c21f1e2719ef35b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 02:01:10 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 31 02:01:10 2012 -0700" }, "message": "Merge \"msm: camera: Adjust exposure under low light for Snapshot\" into msm-3.0" }, { "commit": "968c774ea6466fa7adbf2eac333220132acda306", "tree": "dd407c83e2143e44ce5ca7f87dde76bab3c1e7a1", "parents": [ "03bbfdade61daaa932abb4f2b998b9feb2380289" ], "author": { "name": "Seungwon Jeon", "email": "tgih.jun@samsung.com", "time": "Thu May 31 11:54:47 2012 +0300" }, "committer": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Thu May 31 11:54:53 2012 +0300" }, "message": "mmc: core: Support packed write command for eMMC4.5 device\n\nThis patch supports packed write command of eMMC4.5 device.\nSeveral writes can be grouped in packed command and all data\nof the individual commands can be sent in a single transfer\non the bus.\n\nChange-Id: I391c3e5f73b785a8b7d25eb8256051020cfb0631\nSigned-off-by: Seungwon Jeon \u003ctgih.jun@samsung.com\u003e\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n" }, { "commit": "5a6d7d66aa937535a49bad7131534429a9fae657", "tree": "c8049a6b0f3589e110457dee50310cac7ab16705", "parents": [ "03bbfdade61daaa932abb4f2b998b9feb2380289" ], "author": { "name": "Hariprasad Dhalinarasimha", "email": "hnamgund@codeaurora.org", "time": "Tue May 29 17:48:52 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 31 01:18:48 2012 -0600" }, "message": "tz: Change the names of the APIs used for tz in copper\n\nChange the names of the APIs to reflect copper baseline\n\nChange-Id: I73bc531de282df5ae46cf9b8be53b23abccfeb8d\nSigned-off-by: Hariprasad Dhalinarasimha \u003chnamgund@codeaurora.org\u003e\n" }, { "commit": "03bbfdade61daaa932abb4f2b998b9feb2380289", "tree": "9504bde6965bf77edafa604f2b62c72f72aa6d20", "parents": [ "55896a8fae07429053af62c84c0904c955f3c9ac", "0cbf5d8c04c79724fe889d1750c6efa2c960410f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed May 30 23:59:46 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed May 30 23:59:46 2012 -0700" }, "message": "Merge \"msm: mdm: add board support for the sglte modem\" into msm-3.0" }, { "commit": "55896a8fae07429053af62c84c0904c955f3c9ac", "tree": "38f2ed91dd4ce962fac38cf4d5c669c535cf6acd", "parents": [ "acf4d06b8bdc3b4dc95126188769e6837683a3d5", "c9fa6999ad8b2f10ec4e807ee3dae621f8c6d4fe" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed May 30 23:59:37 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed May 30 23:59:37 2012 -0700" }, "message": "Merge \"msm-fb: display: Reducing the display wake up time\" into msm-3.0" }, { "commit": "acf4d06b8bdc3b4dc95126188769e6837683a3d5", "tree": "95044df4941816ddfa7b33c196f7452ed9f5fe73", "parents": [ "0f58350ead8a856269c63862806d51fdbb5400af", "e3a95f7e14e2e0b6afa577f5e670882f04f8f600" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed May 30 23:59:23 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed May 30 23:59:23 2012 -0700" }, "message": "Merge \"USB: msm72k_udc: Fix NULL pointer dereference crash in msm72k_enable()\" into msm-3.0" }, { "commit": "0f58350ead8a856269c63862806d51fdbb5400af", "tree": "deca03ab73cc5e01c0f32d253b4ce7faca1f42bc", "parents": [ "3afbdbcee1b8d223fa5d67b40f19eea01daf4580", "86f80c9c2a19ff1b0741b6f6d37be23a5e54aecc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed May 30 23:59:15 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed May 30 23:59:15 2012 -0700" }, "message": "Merge \"usb: gadget: Remove dependency between HSIC and MSM_OTG.\" into msm-3.0" }, { "commit": "3afbdbcee1b8d223fa5d67b40f19eea01daf4580", "tree": "8cade977736490aa8db15527d3b8a8b3bfc15618", "parents": [ "8f0d7158fcaad3c5a8b7bb381631f3d8a2c3a154", "7a77c7ca07bbcc390967552d0973238ac48b5597" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed May 30 23:59:07 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed May 30 23:59:07 2012 -0700" }, "message": "Merge \"msm_fb : Disable power collapse before VSync to negate wake up latencies.\" into msm-3.0" }, { "commit": "8f0d7158fcaad3c5a8b7bb381631f3d8a2c3a154", "tree": "3267d277e9bdcc5f4ea718819e31bf2c841db352", "parents": [ "23c34c559f0597ee123233eb240a67d236b3a188", "902c51e95a0f8f7728d57779cdf1da5a670eafd9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed May 30 21:57:44 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed May 30 21:57:44 2012 -0700" }, "message": "Merge \"tty: n_smux: Fix scheduling while atomic issue for ldisc open/close\" into msm-3.0" }, { "commit": "23c34c559f0597ee123233eb240a67d236b3a188", "tree": "bef7b36069de87fc2de63fb518daed6072131a88", "parents": [ "bd0a324b3d592e1b9ddfecaa05e9c2755eb19bde", "6f40725b939c38f5cd655962826fefaedf82f754" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed May 30 21:57:43 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed May 30 21:57:43 2012 -0700" }, "message": "Merge \"msm: sdio: Initialize timer before creating thread\" into msm-3.0" }, { "commit": "bd0a324b3d592e1b9ddfecaa05e9c2755eb19bde", "tree": "1cb249b096b6c148d8ab358d861f81a5c24e5f22", "parents": [ "8372ae7982c1ae5f95b61db22ab369d03dd968ec", "9ec248432701cb73d5ba0a37e943ce890dcbfdd1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed May 30 21:57:39 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed May 30 21:57:39 2012 -0700" }, "message": "Merge \"msm_serial_hs_lite: Refactor wait_for_xmitr\" into msm-3.0" }, { "commit": "8372ae7982c1ae5f95b61db22ab369d03dd968ec", "tree": "c0ca1dc7b6ecf3ce082ec3025432f5061bb82f2c", "parents": [ "d110434c0e8f1b32b276d98980fa0e9856e5fe04", "4f1025fb7e4fa0bad3dacabc5df8f666d4c3d321" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed May 30 21:57:35 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed May 30 21:57:35 2012 -0700" }, "message": "Merge \"msm_serial_hs_lite: Read back the NCF register after writing\" into msm-3.0" }, { "commit": "d110434c0e8f1b32b276d98980fa0e9856e5fe04", "tree": "1f55e2089fb3b3af22ccc9366b84b06cec1f15d9", "parents": [ "19533230e8f3dcfb0e5b1addba5ea9901ac62dca", "6bba008fbead844722c5dc80b6c4dd59adc637c9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed May 30 21:57:31 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed May 30 21:57:31 2012 -0700" }, "message": "Merge \"Bluetooth: Check for NULL pointer dereference\" into msm-3.0" }, { "commit": "19533230e8f3dcfb0e5b1addba5ea9901ac62dca", "tree": "9104a39b3f202b9ed6c013b4aeec6fd56eb16262", "parents": [ "b174e663ef25b0218eeac3c57b88abda5ebe2cbc", "a3be3a3a6c5c791d8b3d228306ebde3f897d6256" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed May 30 21:57:28 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed May 30 21:57:28 2012 -0700" }, "message": "Merge \"msm: sps: add input checking for SPS APIs\" into msm-3.0" }, { "commit": "b174e663ef25b0218eeac3c57b88abda5ebe2cbc", "tree": "b8f2b24adb6a6d27878a6b509f6dd24b2ba292db", "parents": [ "e0e5caeacaadef687fb25448bd6c9456caf6763d", "7fc4a6abe70397d40ae6aab4de62a557427e3ee2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed May 30 21:57:21 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed May 30 21:57:21 2012 -0700" }, "message": "Merge \"mmc: card: adding specific timeout to the sanitize request\" into msm-3.0" }, { "commit": "4ed4ad8e6c785cc221ac416f1ed18de0d8d337b3", "tree": "7a076273cfc430bdebc11ca124418bc46d486518", "parents": [ "e0e5caeacaadef687fb25448bd6c9456caf6763d" ], "author": { "name": "Adinarayana Gupta Grandhi", "email": "agrandhi@codeaurora.org", "time": "Tue Apr 03 17:11:56 2012 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed May 30 21:21:29 2012 -0600" }, "message": "msm: board-8x60: Add RTB support\n\nAdd a device corresponding to RTB. This allows for RTB logging\noccur when CONFIG_MSM_RTB is enabled.\n\nChange-Id: I49aab2f8258412ccfa5a02f5616b041bb753fdef\nSigned-off-by: Adinarayana Gupta Grandhi \u003cagrandhi@codeaurora.org\u003e\n" }, { "commit": "e2ebe3cc6bce4609a73b3b7afd7fac7a3343c021", "tree": "92daf5f004bc279dd8e7c55d5f5b80fe317ded07", "parents": [ "2dec7e975a31b837d98710f13f14bc6f1bab3dd5" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Wed Apr 04 10:54:43 2012 -0600" }, "committer": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Wed May 30 21:20:36 2012 -0600" }, "message": "msm: smsm: Add new SMSM bit definition\n\nAdd SMSM_LTE_COEX_AWAKE bit definition used between Modem and WCNSS for\nLTE coexistence signaling.\n\nChange-Id: I8995a30fc8786a01e815aee8178f7337181250d9\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "85c95406680ce1a959a9b8cdb5aff7afcd699038", "tree": "a0b137365fc1006b4c2a44809bd5a501ca8c4187", "parents": [ "29bb4d5fa7a285c8fb5d5db55225dab700b80419" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed May 30 17:32:37 2012 -0700" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed May 30 17:33:36 2012 -0700" }, "message": "gpu: ion: Use standard cache routines\n\nInstead of using custom routines for cache operations use the\nstandard operations for cache flush, cache clean, and cache\ninvalidate. In addition only call outer cache routines if\nouter cache is available.\n\nChange-Id: Idb51bf7348fd526ebdea1e6ff2e366b8a3b4de33\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "e0e5caeacaadef687fb25448bd6c9456caf6763d", "tree": "3b30bb68497756583a5ddcd823cde4f56d7c1e97", "parents": [ "a3830c71d286fa475c594d9a721d61f4380dbfcf", "eb8d23997b3c52241f4ce2492ffdaabf2f628988" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed May 30 17:28:09 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed May 30 17:28:09 2012 -0700" }, "message": "Merge \"USB: gadget: Add HSUART transport for RMNET \u0026 DUN\" into msm-3.0" }, { "commit": "a3830c71d286fa475c594d9a721d61f4380dbfcf", "tree": "f35825280cadeed60b1287be62d5424cf9560254", "parents": [ "36785c58573f18514a2472a2f7bc3ce64495d906", "14fe7fa7cbfed6c384810642235c62e3ca79d79f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed May 30 17:28:04 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed May 30 17:28:04 2012 -0700" }, "message": "Merge \"msm: mdm: make the mdm driver common between sglte and mdm\" into msm-3.0" }, { "commit": "36785c58573f18514a2472a2f7bc3ce64495d906", "tree": "46efeb2a62f8c85ef4cc35d95c15b8ca89e4317f", "parents": [ "2dec7e975a31b837d98710f13f14bc6f1bab3dd5", "6728a9a62e8978031bca8188e1f6d6ebb6b979de" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed May 30 17:28:02 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed May 30 17:28:02 2012 -0700" }, "message": "Merge changes I24bee29b,Ia543bb06,I50a8acf9 into msm-3.0\n\n* changes:\n n_smux: smux_ctl: Disable local loopback\n n_smux: Enable SMUX driver for 8960 Fusion 4\n msm: rmnet_smux: Add RMNET over SMUX\n" }, { "commit": "2e3168f2b7c1efc95fc2f160cb5ef9b7d38319d5", "tree": "bf6b4a70d6cc183cb53d8056405d4f29914d252a", "parents": [ "2dec7e975a31b837d98710f13f14bc6f1bab3dd5" ], "author": { "name": "Bharath Ramachandramurthy", "email": "bramacha@codeaurora.org", "time": "Thu May 03 16:29:09 2012 -0700" }, "committer": { "name": "Phani Kumar Uppalapati", "email": "phanik@codeaurora.org", "time": "Wed May 30 16:35:22 2012 -0700" }, "message": "ASOC: msm: Add native audio driver support.\n\nAdding native audio driver support for copper. This driver deals\nwith interfaces to DSP.\n\nChange-Id: I8ced9663f2e0ed486be7b2191efaf9e8b1d97f7f\nSigned-off-by: Bharath Ramachandramurthy \u003cbramacha@codeaurora.org\u003e\n" }, { "commit": "749260c35e01eb9d3395c8feeb42db0c3a9ce5d1", "tree": "f003414eb8ec5da000fae4b09d0bb18eb96eaa6d", "parents": [ "2dec7e975a31b837d98710f13f14bc6f1bab3dd5" ], "author": { "name": "Hanumant Singh", "email": "hanumant@codeaurora.org", "time": "Wed May 23 14:44:14 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed May 30 15:29:17 2012 -0600" }, "message": "msm: Disable Dynamic memory management\n\nDisables DMM across 8960, 8064 and 8930\n\nCRs-fixed: 364134\nChange-Id: I699ce0a233792d729a331f960695c2905442ae97\nSigned-off-by: Hanumant Singh \u003chanumant@codeaurora.org\u003e\n" }, { "commit": "e653c2b3b7b2edce42105c6aea8d873bba123c78", "tree": "e6787801dc3ce1c3138c4f61f5cb29b7e6aee321", "parents": [ "2dec7e975a31b837d98710f13f14bc6f1bab3dd5" ], "author": { "name": "Naveen Ramaraj", "email": "nramaraj@codeaurora.org", "time": "Wed May 30 12:59:25 2012 -0700" }, "committer": { "name": "Naveen Ramaraj", "email": "nramaraj@codeaurora.org", "time": "Wed May 30 12:59:25 2012 -0700" }, "message": "msm: ocmem: Fix a possible uninitialized variable warning.\n\nInitialize the number of partitions to zero to avoid a\npossible warning due to lack of initialization.\n\nSigned-off-by: Naveen Ramaraj \u003cnramaraj@codeaurora.org\u003e\n" }, { "commit": "29bb4d5fa7a285c8fb5d5db55225dab700b80419", "tree": "2628fa4258746c625f059c6734d89495185aaf4b", "parents": [ "2dec7e975a31b837d98710f13f14bc6f1bab3dd5" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed May 30 12:57:53 2012 -0700" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed May 30 12:58:29 2012 -0700" }, "message": "msm: memory: Use standard cache routines\n\nConvert custom clean, flush, and invalidate cache routines to use\nstandard ARM cache routines.\n\nChange-Id: Ida0c539b89e1b6c98542221f847a9bcd7fc32a2e\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "20b7db95ed48e4aaecbba669f1e57328499d0ea7", "tree": "b1e5da523fcf64abb475d8a8cc3479795293bc50", "parents": [ "562bc55e4d4274e34e41b2a740ca6cfb490f3802" ], "author": { "name": "Hariprasad Dhalinarasimha", "email": "hnamgund@codeaurora.org", "time": "Tue May 29 13:25:11 2012 -0700" }, "committer": { "name": "Hariprasad Dhalinarasimha", "email": "hnamgund@codeaurora.org", "time": "Wed May 30 11:50:58 2012 -0700" }, "message": "msm: clock-copper: Correct the prng clock lookup entry\n\nMap the (real) gcc_prng_ahb_clk to the MSM RNG device instead\nof the dummy clock.\n\nChange-Id: Ib9ee6695c7f35b319901d119d5b1186e39f6cc65\nSigned-off-by: Hariprasad Dhalinarasimha \u003chnamgund@codeaurora.org\u003e\n" }, { "commit": "e65fa41f121530474633a18dbce8f201b420f679", "tree": "49e4f9731f6f1a42b11f29975a96a2cb6c0e5c4c", "parents": [ "9500379a2bd182fa44cc390ef5f0bdefed034bbc" ], "author": { "name": "Venkat Sudhir", "email": "vsudhir@codeaurora.org", "time": "Tue May 15 01:42:31 2012 -0700" }, "committer": { "name": "Venkat Sudhir", "email": "vsudhir@codeaurora.org", "time": "Wed May 30 10:53:23 2012 -0700" }, "message": "ASoC: msm: Add supplementary service for VoLTE and voice call.\n\nAdd support for call hold and resume for Voice and VoLTE calls.\nThis is added to support new events from user space for voice\ndriver. These new events are used to switch between Voice and\nVoLTE calls. These events are handled in trigger function of\ndriver which puts vocproc to standby mode for pause and starts\nwhen resume is passed to trigger function of driver.\n\nChange-Id: Id8774515fdb8437846e7a8864002f4be800e66e1\nSigned-off-by: Venkat Sudhir \u003cvsudhir@codeaurora.org\u003e\n" }, { "commit": "0cbf5d8c04c79724fe889d1750c6efa2c960410f", "tree": "0d8f6f46b70c4d8d21b6652dd9d9bf7ee658812f", "parents": [ "14fe7fa7cbfed6c384810642235c62e3ca79d79f" ], "author": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Thu May 24 15:21:38 2012 -0700" }, "committer": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Wed May 30 10:01:40 2012 -0700" }, "message": "msm: mdm: add board support for the sglte modem\n\nThe sglte modem has its own flash. The power-on\nand power-off sequences are also different from\nthe flashless modem, and the gpios used for IPC\nare different. The mdm driver supports both\ntypes of modems.\n\nChange-Id: Iad33a00a24b00a90f315933f659f76fd782ce684\nSigned-off-by: Joel King \u003cjoelking@codeaurora.org\u003e\n" }, { "commit": "14fe7fa7cbfed6c384810642235c62e3ca79d79f", "tree": "f3592472d24461fb886b2d36cdf9999bea26ff49", "parents": [ "2dec7e975a31b837d98710f13f14bc6f1bab3dd5" ], "author": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Sun May 27 14:26:11 2012 -0700" }, "committer": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Wed May 30 09:59:23 2012 -0700" }, "message": "msm: mdm: make the mdm driver common between sglte and mdm\n\nThe mdm driver is made common between the sglte and mdm\nmodem by harmonizing the gpio names with logical\nfunctionality and adding flags in case of differences.\nThe AP2MDM_PMIC_RESET_N gpio is renamed to AP2MDM_SOFT_RESET.\nThe early_power_on and sfr_query flags are added.\n\nChange-Id: I9a5f8b208979ac7cbd01141f7518f99b0b0fec68\nSigned-off-by: Joel King \u003cjoelking@codeaurora.org\u003e\n" }, { "commit": "2dec7e975a31b837d98710f13f14bc6f1bab3dd5", "tree": "b4df6f8e2d00a09f8b2c57f9e90c2ec2c96bf978", "parents": [ "824db172610020b49a26a556510432e564f1ff10", "e92eb875c90d1499151e5b077b7c6fb7fbfbb882" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed May 30 07:53:36 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed May 30 07:53:36 2012 -0700" }, "message": "Merge \"msm: mdm: add mdm driver support for the sglte modem\" into msm-3.0" }, { "commit": "94d07c3e3d2604777d40ec5d6a2d04dbb105793a", "tree": "45502a843d23e6f0021a01ec3ba120d93b34fa35", "parents": [ "562bc55e4d4274e34e41b2a740ca6cfb490f3802" ], "author": { "name": "Suresh Vankadara", "email": "svankada@codeaurora.org", "time": "Tue May 29 17:59:25 2012 +0530" }, "committer": { "name": "Suresh Vankadara", "email": "svankada@codeaurora.org", "time": "Wed May 30 18:38:29 2012 +0530" }, "message": "msm: camera: Fix for ZSL issue\n\nIn ZSL(Zero Shutter Lag) mode, only 5 buffers are\nallocated. 3 buffers are with VFE and 2 buffers are\nwith userspace. After receiving 3rd buffer only\nuserspace code enqueue free buffers again to driver.\nAfter sending 2 buffers to userspace driver is not\nable to find free buffer to satisfy 3 buffer requirement.\nSo driver always resend it to VFE instead of userspace\nand no frames to userspace.\n\nUpdate driver to send the buffer to userspace and\nresend the same buffer to VFE also in ZSL mode.\n\nCRs-Fixed: 364107\nChange-Id: I4111052acdb3a1973121f71d332c4d3a569c700d\nSigned-off-by: Suresh Vankadara \u003csvankada@codeaurora.org\u003e\n" }, { "commit": "86f80c9c2a19ff1b0741b6f6d37be23a5e54aecc", "tree": "35c160dccf4750a4bf9bccaa4b6dbbc010f05969", "parents": [ "562bc55e4d4274e34e41b2a740ca6cfb490f3802" ], "author": { "name": "Ido Shayevitz", "email": "idos@codeaurora.org", "time": "Wed May 30 15:38:53 2012 +0300" }, "committer": { "name": "Ido Shayevitz", "email": "idos@codeaurora.org", "time": "Wed May 30 15:38:53 2012 +0300" }, "message": "usb: gadget: Remove dependency between HSIC and MSM_OTG.\n\nMSM_OTG is used with the HSUSB core and not with the HSIC core.\nTherefore, HSIC do not need to call any api of the otg.\n\nThis fix solves 2 problems:\n1. Power management: Since the HSIC was registered to the msm_otg,\n then the msm_otg notified the HSIC about cable disconnect, which caused\n to the HSIC to enter to low power mode.\n2. In the future, when both HSIC and HSUSB cores will work\n concurrently, then a race could happen without this fix. The race is\n which one of the two will register to the otg as the gadget driver.\n\nChange-Id: I9f6ec5660a63fcf47733a9b20a31513f2c14e725\nSigned-off-by: Ido Shayevitz \u003cidos@codeaurora.org\u003e\n" }, { "commit": "e3a95f7e14e2e0b6afa577f5e670882f04f8f600", "tree": "da02c6a80af571f7c834a02268469f4f8c52812c", "parents": [ "562bc55e4d4274e34e41b2a740ca6cfb490f3802" ], "author": { "name": "Rajkumar Raghupathy", "email": "raghup@codeaurora.org", "time": "Tue May 29 20:05:47 2012 +0530" }, "committer": { "name": "Rajkumar Raghupathy", "email": "raghup@codeaurora.org", "time": "Wed May 30 17:25:43 2012 +0530" }, "message": "USB: msm72k_udc: Fix NULL pointer dereference crash in msm72k_enable()\n\nAccessing the _ep and desc parameters may lead to crash if they are NULL.\nHence check if they are NULL before accessing them.\n\nChange-Id: I27d6a5588f8290b3d671ad6ebbfe0435a222c98b\nCRs-Fixed: 366074\nSigned-off-by: Rajkumar Raghupathy \u003craghup@codeaurora.org\u003e\n" }, { "commit": "7fc4a6abe70397d40ae6aab4de62a557427e3ee2", "tree": "03d0eebeff1951502de8d059c698e1523ed04878", "parents": [ "562bc55e4d4274e34e41b2a740ca6cfb490f3802" ], "author": { "name": "Yaniv Gardi", "email": "ygardi@codeaurora.org", "time": "Tue May 29 21:10:55 2012 +0300" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed May 30 04:24:27 2012 -0600" }, "message": "mmc: card: adding specific timeout to the sanitize request\n\nsince the sanitize request might take a long time, the timer should\nbe configured to a large timeout.\nthe timer is per-request timer. it is started when the request is being\nissued, and incase the card is not responding or there is another issue\nthat might cause the SW to halt, the timer expires.\nthe timer becomes effective when issuing long-duration requests.\n\nChange-Id: Ieca9b27cf08a03cba57e28f6e58151bec3b623dc\nSigned-off-by: Yaniv Gardi \u003cygardi@codeaurora.org\u003e\n" }, { "commit": "d853d13f67f97f88740520fb3b62cab85babce66", "tree": "887cf980943d3aba4292a08e5419807b8f24cbd7", "parents": [ "bba863b721eeb87b425ad8f3b8f1b8064b618c8a" ], "author": { "name": "Hamad Kadmany", "email": "hkadmany@codeaurora.org", "time": "Wed May 30 13:13:46 2012 +0300" }, "committer": { "name": "Hamad Kadmany", "email": "hkadmany@codeaurora.org", "time": "Wed May 30 13:13:46 2012 +0300" }, "message": "media: dvb: Add MPQ documentation\n\nAdded text file which describes MPQ DVB adapter implementation\nand the extensions made for linux DVB core\n\nChange-Id: I50df66a8bec52c224dd00be205ffc022c4d1f13a\nSigned-off-by: Hamad Kadmany \u003chkadmany@codeaurora.org\u003e\n" }, { "commit": "eb8d23997b3c52241f4ce2492ffdaabf2f628988", "tree": "8b37c16695511a23c8c24e8e86318ba3dbadd373", "parents": [ "562bc55e4d4274e34e41b2a740ca6cfb490f3802" ], "author": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Tue Apr 03 18:58:49 2012 +0530" }, "committer": { "name": "Chiranjeevi Velempati", "email": "cvelempa@codeaurora.org", "time": "Wed May 30 09:21:36 2012 +0530" }, "message": "USB: gadget: Add HSUART transport for RMNET \u0026 DUN\n\nHSUART transport can be used for communication\nbetween MSM and MDM. Modify RMNET \u0026 DUN drivers to\nsupport communication over HSUART transport.\n\nCRs-Fixed: 355162\nChange-Id: Idad2ab1b32d873cc055436537eed1715c92ceb90\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\nSigned-off-by: Chiranjeevi Velempati \u003ccvelempa@codeaurora.org\u003e\n" }, { "commit": "824db172610020b49a26a556510432e564f1ff10", "tree": "fc56ba383ee0b8ef18bfd7e50dec958d9e979d9b", "parents": [ "562bc55e4d4274e34e41b2a740ca6cfb490f3802" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Tue May 29 18:05:09 2012 -0700" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Tue May 29 19:27:02 2012 -0700" }, "message": "msm: 8064: Support earlyprintk support\n\nClean up the debug UART config options and add support for\nprinting early debug messages using lightweight low-level\nUART functions.\n\nChange-Id: Ic018393135193f388e94f94fe09df32da839fbb3\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "e92eb875c90d1499151e5b077b7c6fb7fbfbb882", "tree": "3d07e29f32afaed20bc25b98efe4063290386e3c", "parents": [ "e52a90748887c68fa51c2a9f7eacd9baa305b45b" ], "author": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Sun May 06 09:30:24 2012 -0700" }, "committer": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Tue May 29 17:10:47 2012 -0700" }, "message": "msm: mdm: add mdm driver support for the sglte modem\n\nThe sglte QSC modem has its own firmware storage but powering\nit on and reseting it is controlled by the msm. The same mdm\ndriver is used to support modems with their own flash and those\nthat are flashless.\n\nChange-Id: I2f9a0e79a78cbe8eda1d887ce731386cbdf444e0\nSigned-off-by: Joel King \u003cjoelking@codeaurora.org\u003e\n" }, { "commit": "7a77c7ca07bbcc390967552d0973238ac48b5597", "tree": "86b1a8a8398abc68f3e5bd0f2f56a1e1de17001a", "parents": [ "562bc55e4d4274e34e41b2a740ca6cfb490f3802" ], "author": { "name": "Anitha Anand", "email": "anithas@codeaurora.org", "time": "Tue Apr 24 15:46:36 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue May 29 17:07:22 2012 -0600" }, "message": "msm_fb : Disable power collapse before VSync to negate wake up latencies.\n\nFor a 16ms frame period the CPU may go into deep power collapse.\nBased on the power collapse exit latency for that low power mode,\nthe frame period gets extended by the latency to wake up the CPU at the\nnext VSYNC. This results in a user experience glitch. Adding an hrtimer\nto wake up the CPU few ms before the Vsync and disabling power collapse\ncompensates for the extra time spent in waking up the CPU out of deep\nsleep. On timer expiry, set wakelock to veto idle power collapse till\nthe next VSync. The wakelock is released on the next VSYNC occurrence.\n\nChange-Id: I3e013cc54c36d3015d6fafa4b9ccd435cb5532ab\nSigned-off-by: Anitha Anand \u003canithas@codeaurora.org\u003e\n" }, { "commit": "6f40725b939c38f5cd655962826fefaedf82f754", "tree": "87e937f302cbe3ae0dccd81660fba32d0d11fadc", "parents": [ "562bc55e4d4274e34e41b2a740ca6cfb490f3802" ], "author": { "name": "Venkat Gopalakrishnan", "email": "venkatg@codeaurora.org", "time": "Wed May 16 19:54:09 2012 -0700" }, "committer": { "name": "Venkat Gopalakrishnan", "email": "venkatg@codeaurora.org", "time": "Tue May 29 15:12:46 2012 -0700" }, "message": "msm: sdio: Initialize timer before creating thread\n\nThe thread function can start executing even before the timer\nis initialized leading to a crash. Hence init the timer before\ncreating the thread.\n\nCRs-Fixed: 362398\nChange-Id: I471f258808a38095ea0621d2ee9998cf4661d7a1\nSigned-off-by: Venkat Gopalakrishnan \u003cvenkatg@codeaurora.org\u003e\n" }, { "commit": "5c2f7ecbcda804f2b241ff6a8efa3a48593b74e3", "tree": "90f7fbcc6ec4cf73ae3e93c8d1096273e397d8d5", "parents": [ "136fbcf233893186369f20472ae0af9d791e0ad3" ], "author": { "name": "Gagan Mac", "email": "gmac@codeaurora.org", "time": "Fri May 18 20:51:49 2012 -0600" }, "committer": { "name": "Gagan Mac", "email": "gmac@codeaurora.org", "time": "Tue May 29 15:52:40 2012 -0600" }, "message": "msm: msm_bus: Add Copper specific Master/Slave IDs\n\nAdd Master/slave IDs for Copper to enable integration of power\nfeatures in multimedia drivers.\n\nChange-Id: I36474621537cdeb799da29974318fb2e53c38f54\nSigned-off-by: Gagan Mac \u003cgmac@codeaurora.org\u003e\n" }, { "commit": "136fbcf233893186369f20472ae0af9d791e0ad3", "tree": "6afe033a5005018ac3a422e7340aa1b8c99ce49f", "parents": [ "47a999a014be19b99bca20d58d96bcded23facbe" ], "author": { "name": "Gagan Mac", "email": "gmac@codeaurora.org", "time": "Thu Apr 12 18:03:11 2012 -0600" }, "committer": { "name": "Gagan Mac", "email": "gmac@codeaurora.org", "time": "Tue May 29 15:52:19 2012 -0600" }, "message": "msm: copper: Temporarily stub out bus arbitration for copper\n\nTo unblock Multimedia and other bus scaling clients, stub\nout arbitrated bandwidth settings for Copper until RPM\nchanges are merged.\nClock scaling code algorithm is unchanged, so clocks\ncan still be scaled as on 8960/8064/8930.\n\nChange-Id: Iebeb631a47eed662761b12b696f1f37cc61ef54b\nSigned-off-by: Gagan Mac \u003cgmac@codeaurora.org\u003e\n" }, { "commit": "47a999a014be19b99bca20d58d96bcded23facbe", "tree": "b4057ef78cd5d9bd71c822b0fafbe2274e17e8de", "parents": [ "ac45a2eff9cc69f0f87e79ea82bdf5eebef5bcc0" ], "author": { "name": "Gagan Mac", "email": "gmac@codeaurora.org", "time": "Wed Jan 18 20:36:12 2012 -0700" }, "committer": { "name": "Gagan Mac", "email": "gmac@codeaurora.org", "time": "Tue May 29 15:49:04 2012 -0600" }, "message": "msm: msm_bus: Abstract RPM layer for copper\n\nAbstract RPM configuration and initialization functions\nout of fabrics. This is required for copper as it does\nnot use RPM for arbitraiton for local nodes, but needs\nthe bus topology for NOCs as clock aggregation mechanism\nstays the same as on 8960/8064/8930.\n\nChange-Id: Ia6e2f616c756319813f7242ea5d059384519c821\nSigned-off-by: Gagan Mac \u003cgmac@codeaurora.org\u003e\n" }, { "commit": "a3be3a3a6c5c791d8b3d228306ebde3f897d6256", "tree": "854a3b5aadb5d9b3b5c54ee18a8f9b1de2a8d145", "parents": [ "603161f9ca988a6f9f41d7280c5e4f704a121d7c" ], "author": { "name": "Yan He", "email": "yanhe@codeaurora.org", "time": "Tue May 29 11:48:38 2012 -0700" }, "committer": { "name": "Yan He", "email": "yanhe@codeaurora.org", "time": "Tue May 29 11:48:38 2012 -0700" }, "message": "msm: sps: add input checking for SPS APIs\n\nCheck the input values for the arguments of SPS APIs to make sure\nthey are vaild.\n\nSigned-off-by: Yan He \u003cyanhe@codeaurora.org\u003e\n" }, { "commit": "6ed700bd44a8244be0abd619f3ca77c6d1add3b8", "tree": "31556c803f91192f4e6cc3d89d82262e1bb738ae", "parents": [ "562bc55e4d4274e34e41b2a740ca6cfb490f3802" ], "author": { "name": "Hariprasad Dhalinarasimha", "email": "hnamgund@codeaurora.org", "time": "Thu May 24 12:55:30 2012 -0700" }, "committer": { "name": "Hariprasad Dhalinarasimha", "email": "hnamgund@codeaurora.org", "time": "Tue May 29 11:28:12 2012 -0700" }, "message": "PRNG: defconfig: Enable PRNG\n\nUpdate defconfig file to enable PRNG on copper\n\nChange-Id: Ic21528b73a45432f0d8627a77ad9b263d72f8540\nSigned-off-by: Hariprasad Dhalinarasimha \u003chnamgund@codeaurora.org\u003e\n" }, { "commit": "902c51e95a0f8f7728d57779cdf1da5a670eafd9", "tree": "6beebd94f82245133707a337745967fda86125e1", "parents": [ "a5783d4a5ac2aa0faf3063687e80d238cb171540" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Tue May 29 12:12:16 2012 -0600" }, "committer": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Tue May 29 12:18:56 2012 -0600" }, "message": "tty: n_smux: Fix scheduling while atomic issue for ldisc open/close\n\nUnlock spinlock when calling platform_device functions during line\ndiscipline (ldisc) loading an unloading.\n\nThis fixes a potential scheduling while atomic condition if the platform\ndevice code needs to allocate memory.\n\nChange-Id: I7dbf15dc62b2276393272392a038c1d846ea2419\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "9f36ce34dc0e6f840c6198430adfb44142d91f4b", "tree": "f400d3be2e5eef416c72fa2f2b2468c2132c7ed4", "parents": [ "562bc55e4d4274e34e41b2a740ca6cfb490f3802" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Fri May 25 15:15:16 2012 -0700" }, "committer": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Tue May 29 10:57:30 2012 -0700" }, "message": "msm_fb: display: Register MDP fault handler with IOMMU driver.\n\nMDP fault handler will print minimum information on display related\npage faults and its registered with the IOMMU driver handler.\nThis is to minimize logging when a series of faults are seen to cause\nwatchdog bark.\n\nChange-Id: I7728e8265cad8f2b506f1ec7f71309ccdcb804a2\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\n" }, { "commit": "6728a9a62e8978031bca8188e1f6d6ebb6b979de", "tree": "5e2dc626b2e40ca8f3c4c06b15a34eb3c120af63", "parents": [ "b32d7ca16831f128bf59e4b56b476adec27c618b" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Tue May 29 11:34:38 2012 -0600" }, "committer": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Tue May 29 11:51:30 2012 -0600" }, "message": "n_smux: smux_ctl: Disable local loopback\n\nFor development, the local loopback mode was used. Now that\nthe full system is ready, disable loopback mode to enable\ncommunication with the remote system.\n\nChange-Id: I24bee29b3fa41690ccbaf8992ecb3cb166dc3ffc\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "b32d7ca16831f128bf59e4b56b476adec27c618b", "tree": "43ba60957cf57e87022e347821d7a2fdbf1f73f3", "parents": [ "c25f097206740d8c9bf098f1cacb2374d4dc2a39" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Thu May 10 19:18:40 2012 -0600" }, "committer": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Tue May 29 11:51:29 2012 -0600" }, "message": "n_smux: Enable SMUX driver for 8960 Fusion 4\n\nEnable SMUX Line Discipline, SMUX_CTL, SMUX_RMNET drivers.\n\nChange-Id: Ia543bb0682c008ba795b67926873dae7acf557a1\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "c25f097206740d8c9bf098f1cacb2374d4dc2a39", "tree": "7effa0963aff3264f2ba3a90f64517c7417d6b08", "parents": [ "a5783d4a5ac2aa0faf3063687e80d238cb171540" ], "author": { "name": "Karthikeyan Ramasubramanian", "email": "kramasub@codeaurora.org", "time": "Mon May 14 17:40:14 2012 -0600" }, "committer": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Tue May 29 11:51:18 2012 -0600" }, "message": "msm: rmnet_smux: Add RMNET over SMUX\n\nRMNET over SMUX will support IP Traffic over HSUART. This is used in\nFusion 4 target between Application processor and QSC modem.\n\nChange-Id: I50a8acf96dc85d10e574768dc21db672b6615924\nSigned-off-by: Karthikeyan Ramasubramanian \u003ckramasub@codeaurora.org\u003e\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "562bc55e4d4274e34e41b2a740ca6cfb490f3802", "tree": "9e257f6c242a1b0538b2be94b9ca6cacb29f7f1d", "parents": [ "6bfdceed8d25785dc802f0d7d436358fdca53f89", "687841ef81f55c5c9cc516af45a8255fea0c67b9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue May 29 10:17:17 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue May 29 10:17:17 2012 -0700" }, "message": "Merge \"msm: camera: Fix memory leaks in vfe2x driver\" into msm-3.0" }, { "commit": "6bfdceed8d25785dc802f0d7d436358fdca53f89", "tree": "4dbb3842deb341626ed5e4d27081029060aa6bd5", "parents": [ "a5783d4a5ac2aa0faf3063687e80d238cb171540", "a3cf19830807db88c319986e43c6110ab6687bda" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue May 29 10:17:14 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue May 29 10:17:14 2012 -0700" }, "message": "Merge changes Ib7735ae0,I47859c66 into msm-3.0\n\n* changes:\n u_ctrl_hsuart: Add HSUART control module\n u_data_hsuart.c : Add HSUART data module\n" }, { "commit": "6bba008fbead844722c5dc80b6c4dd59adc637c9", "tree": "172984006a94c68e40f0ffc7ae9b46b30a4146fa", "parents": [ "ebdd79ed744d4ea5b32e555eb511ed3b7e6834db" ], "author": { "name": "Peter Krystad", "email": "pkrystad@codeaurora.org", "time": "Wed May 23 17:08:16 2012 -0700" }, "committer": { "name": "Peter Krystad", "email": "pkrystad@codeaurora.org", "time": "Tue May 29 09:01:55 2012 -0700" }, "message": "Bluetooth: Check for NULL pointer dereference\n\nThe fix in commit ff9718f8254b96dc313dd998c195c1c3769417ba was not\ncomplete. In l2cap_logical_link_complete the socket pointer was\ndereferenced in two places, the previous fix only handled one of\nthe locations.\n\nThis fixes an infrequent crash when performing OPP or FTP transfer\nover AMP (Bluetooth 3.0+HS).\n\nChange-Id: I730a503b143723ffff1765602151d66fe87103da\nCRs-fixed: 360758\nSigned-off-by: Peter Krystad \u003cpkrystad@codeaurora.org\u003e\n" }, { "commit": "a5783d4a5ac2aa0faf3063687e80d238cb171540", "tree": "dfc601f0dcfdd6a28b9affb45273ffea3feac4f2", "parents": [ "7a2c7bf689d5a04b79a242d1d8acb25fba46d394", "84f72513e5065f35e798a3120bae090a25695648" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue May 29 08:26:14 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue May 29 08:26:14 2012 -0700" }, "message": "Merge \"board-8930: Update touch configuration parameters\" into msm-3.0" }, { "commit": "7a2c7bf689d5a04b79a242d1d8acb25fba46d394", "tree": "a175a3c9c46231f065b1439b82a0e186d09721fe", "parents": [ "1d7b55f4a483b3d7317177f7b70be496b298c1e8", "4863172449c521de86fc056cb43284dbc03dcf9e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue May 29 08:26:11 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue May 29 08:26:11 2012 -0700" }, "message": "Merge \"acpuclock: Add support for 1152MHz cpu freq. from PLL4.\" into msm-3.0" }, { "commit": "1d7b55f4a483b3d7317177f7b70be496b298c1e8", "tree": "49046906a42fbbae6c92e2ea43e1b4981219abe1", "parents": [ "bfc4af656b7d6b1e17c9e7592b2285a32704e947", "1c96bc441e59d6f0439671c85bc41a3507f232e8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue May 29 08:26:09 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue May 29 08:26:09 2012 -0700" }, "message": "Merge \"msm_fb: display: Free staged foreground pipes during suspend\" into msm-3.0" }, { "commit": "bfc4af656b7d6b1e17c9e7592b2285a32704e947", "tree": "5b0c809a50da5bdd99d3df0114bb93cd8ab05ae5", "parents": [ "04eb8f316a811b8b166a2275edc51236becf85ae", "ceaa8bc060d790cb97fa3258d23aa25010eaf098" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue May 29 08:26:08 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue May 29 08:26:08 2012 -0700" }, "message": "Merge \"n_smux: Fix compilation when CONFIG_N_SMUX is undefined\" into msm-3.0" }, { "commit": "04eb8f316a811b8b166a2275edc51236becf85ae", "tree": "0f2b2e4a6881f4596835fa3fe259f706b512b1bf", "parents": [ "72bea4a9ebd32ac8b19e317b855df40f9f5a3089", "8ac659eb3d96e31b8bb6b8d09143ddd6eb83ae19" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue May 29 08:26:06 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue May 29 08:26:06 2012 -0700" }, "message": "Merge \"msm: core: eMMC v4.5 BKOPS fixes\" into msm-3.0" }, { "commit": "4863172449c521de86fc056cb43284dbc03dcf9e", "tree": "12b46584c86f866fbfe82a727bd03f6e22e22a86", "parents": [ "72bea4a9ebd32ac8b19e317b855df40f9f5a3089" ], "author": { "name": "Trilok Soni", "email": "tsoni@codeaurora.org", "time": "Thu May 17 20:56:42 2012 +0530" }, "committer": { "name": "Aparna Mallavarapu", "email": "aparnam@codeaurora.org", "time": "Tue May 29 18:58:57 2012 +0530" }, "message": "acpuclock: Add support for 1152MHz cpu freq. from PLL4.\n\nAdd the acpuclock table to support 1152MHz cpu frequency from PLL4.\n\nChange-Id: Icfb5e17a694bb5639143bfcccaf5cac678794905\nSigned-off-by: Trilok Soni \u003ctsoni@codeaurora.org\u003e\nSigned-off-by: Aparna Mallavarapu \u003caparnam@codeaurora.org\u003e\n" }, { "commit": "bba863b721eeb87b425ad8f3b8f1b8064b618c8a", "tree": "6b74dcf6aecbc94b563b17563ec92058b5686d7d", "parents": [ "0f411ec34788eae7d4df8a99deafb8e8d9076b8b" ], "author": { "name": "Hamad Kadmany", "email": "hkadmany@codeaurora.org", "time": "Tue May 29 15:37:16 2012 +0300" }, "committer": { "name": "Hamad Kadmany", "email": "hkadmany@codeaurora.org", "time": "Tue May 29 15:37:16 2012 +0300" }, "message": "media: dvb: mpq: Support get-capabilities API\n\nProvide dvb-core with implementation of get-capabilities\nAPI so that applications can query actual demux\ncapabilities based on the underlying HW\n\nChange-Id: Ic05f496bdb87909c898c8cf1bbf372dc78ddbf71\nSigned-off-by: Hamad Kadmany \u003chkadmany@codeaurora.org\u003e\n" }, { "commit": "a3cf19830807db88c319986e43c6110ab6687bda", "tree": "9819e29f3ae0f070c89c9ec704a8360ffbe5bc25", "parents": [ "2b276254c7e6fdd01da162d28a1ffeb1d95d5df7" ], "author": { "name": "Chiranjeevi Velempati", "email": "cvelempa@codeaurora.org", "time": "Tue May 15 18:15:26 2012 +0530" }, "committer": { "name": "Chiranjeevi Velempati", "email": "cvelempa@codeaurora.org", "time": "Tue May 29 15:49:45 2012 +0530" }, "message": "u_ctrl_hsuart: Add HSUART control module\n\nRMNET driver can use this hsuart control module\nfor sending and receiving the control information.\n\nCRs-Fixed: 355162\nChange-Id: Ib7735ae0492ca80b0d41d5abb24aab569dfea86d\nSigned-off-by: Chiranjeevi Velempati \u003ccvelempa@codeaurora.org\u003e\n" }, { "commit": "2b276254c7e6fdd01da162d28a1ffeb1d95d5df7", "tree": "a911d5a46897047afe2970b3faa4cd52defb33b9", "parents": [ "ceaa8bc060d790cb97fa3258d23aa25010eaf098" ], "author": { "name": "Chiranjeevi Velempati", "email": "cvelempa@codeaurora.org", "time": "Tue May 29 10:10:37 2012 +0530" }, "committer": { "name": "Chiranjeevi Velempati", "email": "cvelempa@codeaurora.org", "time": "Tue May 29 15:49:30 2012 +0530" }, "message": "u_data_hsuart.c : Add HSUART data module\n\nRMNET and DUN drivers use this module for sending\nand recieving data traffic. DUN driver also uses\nthis module for transmission of control information.\n\nCRs-Fixed: 355162\nChange-Id: I47859c669f47fcd6cb0210539412794b95027501\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\nSigned-off-by: Chiranjeevi Velempati \u003ccvelempa@codeaurora.org\u003e\n" }, { "commit": "ceaa8bc060d790cb97fa3258d23aa25010eaf098", "tree": "a9ab0a7f970869f44b75ecb6a82b6246754df359", "parents": [ "72bea4a9ebd32ac8b19e317b855df40f9f5a3089" ], "author": { "name": "Angshuman Sarkar", "email": "angshuman@codeaurora.org", "time": "Mon May 28 10:21:38 2012 +0530" }, "committer": { "name": "Chiranjeevi Velempati", "email": "cvelempa@codeaurora.org", "time": "Tue May 29 15:48:44 2012 +0530" }, "message": "n_smux: Fix compilation when CONFIG_N_SMUX is undefined\n\nFix compilation issues when CONFIG_N_SMUX is undefined and\nempty stub functions are getting defined.\n\nChange-Id: I6a9982dac7d9558b8da533f1fc28dddac6c1f8fc\nSigned-off-by: Angshuman Sarkar \u003cangshuman@codeaurora.org\u003e\n" }, { "commit": "8ac659eb3d96e31b8bb6b8d09143ddd6eb83ae19", "tree": "18e88e182b789116acdf1dc44cd843991b696974", "parents": [ "0f411ec34788eae7d4df8a99deafb8e8d9076b8b" ], "author": { "name": "Konstantin Dorfman", "email": "kdorfman@codeaurora.org", "time": "Sat May 26 09:06:19 2012 +0300" }, "committer": { "name": "Konstantin Dorfman", "email": "kdorfman@codeaurora.org", "time": "Tue May 29 13:07:42 2012 +0300" }, "message": "msm: core: eMMC v4.5 BKOPS fixes\n\nThis change fixes the following issues in eMMC v4.5 BKOPS (back\nground operations)\n1. For HPI (high priority interrupt) sent using CMD12,\n configure R1B response flag, as defined by spec\n2. Mark BKOPS shadow flag (doing_bkops) only for non-urgent BKOPS levels,\n otherwise is not needed this because BKOPS already completed\n synchronously (with R1B)\n3. Send HPI before sleep (CMD5), when BKOPS is in progress\n\nChange-Id: I575fe0946d04c91f1de71804409c60c7acb6d46a\nSigned-off-by: Konstantin Dorfman \u003ckdorfman@codeaurora.org\u003e\n" }, { "commit": "1c96bc441e59d6f0439671c85bc41a3507f232e8", "tree": "8e3148c297753a99a30b43ddfec526d88b11a1a9", "parents": [ "0f411ec34788eae7d4df8a99deafb8e8d9076b8b" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Fri May 25 12:31:31 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue May 29 03:29:49 2012 -0600" }, "message": "msm_fb: display: Free staged foreground pipes during suspend\n\nDuring suspend, some foreground pipes might still be staged and\nhave to be removed before disabling timing generator.\nSo, these pipes are staged down and freed before timing generator\nis switched off.\n\nChange-Id: I3f2376cac43464c64cd1c9e2f16f3d801298c25d\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\n" }, { "commit": "72bea4a9ebd32ac8b19e317b855df40f9f5a3089", "tree": "667553942d40ee81419d83203aea261204ee65f8", "parents": [ "0f411ec34788eae7d4df8a99deafb8e8d9076b8b", "1305babe26c42371c6551eb8238b0cf745726a15" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue May 29 02:08:36 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue May 29 02:08:36 2012 -0700" }, "message": "Merge \"ASoC: wcd9310: Don\u0027t request irq until MBHC is fully configured\" into msm-3.0" }, { "commit": "687841ef81f55c5c9cc516af45a8255fea0c67b9", "tree": "157fcd940ea6bda67273e61bcdb7929d6d154087", "parents": [ "0f411ec34788eae7d4df8a99deafb8e8d9076b8b" ], "author": { "name": "Suresh Vankadara", "email": "svankada@codeaurora.org", "time": "Mon May 28 09:00:17 2012 +0530" }, "committer": { "name": "Suresh Vankadara", "email": "svankada@codeaurora.org", "time": "Tue May 29 13:21:39 2012 +0530" }, "message": "msm: camera: Fix memory leaks in vfe2x driver\n\nUpdate vfe2x driver to free allocated memory to\navoid memory leaks.\n\nCRs-Fixed: 357468\nChange-Id: I951aca2f2fc8ae103fd9f13a7e66f49f6548d1f0\nSigned-off-by: Suresh Vankadara \u003csvankada@codeaurora.org\u003e\n" }, { "commit": "0f411ec34788eae7d4df8a99deafb8e8d9076b8b", "tree": "3b8372e3729ab88653658045ca218c1672a564c4", "parents": [ "881704b6b7dd2990e4bfab7ff5e680ae875d3307", "d2c325e05cce18145b4639eb22b205efedfb34c5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon May 28 23:57:34 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon May 28 23:57:34 2012 -0700" }, "message": "Merge \"media: dvb: dvb-core: Extend get-capabilities API\" into msm-3.0" }, { "commit": "881704b6b7dd2990e4bfab7ff5e680ae875d3307", "tree": "b6756acd1e2825977bdd6e247d955f9d276c1e2b", "parents": [ "a3fe8df5d61bf52c971da8731ba536773c26c86d", "fa853b91ddfe4ac5eb9c77f9c409223d9b3cc0e4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon May 28 23:57:29 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon May 28 23:57:29 2012 -0700" }, "message": "Merge \"msm_fb: display: Add MDP IOMMU detach support for DTV\" into msm-3.0" }, { "commit": "84f72513e5065f35e798a3120bae090a25695648", "tree": "1406ef3f53f9553e72c1ef20f62925d40dd13f97", "parents": [ "a3fe8df5d61bf52c971da8731ba536773c26c86d" ], "author": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Thu May 17 16:38:56 2012 +0530" }, "committer": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Tue May 29 12:06:00 2012 +0530" }, "message": "board-8930: Update touch configuration parameters\n\nUpdate Atmel touch configuration parameters to have\nbetter touch performance.\n\nCRs-fixed: 362881\nChange-Id: I205f62c606aeae9bb7821382f2465c02deacfb69\nSigned-off-by: Mohan Pallaka \u003cmpallaka@codeaurora.org\u003e\n" }, { "commit": "2e1d752be81c1eee283738ffa21afb179ae1cc1d", "tree": "8bb63cf1404aadbffc3905454e6a1fbd433635c2", "parents": [ "a3fe8df5d61bf52c971da8731ba536773c26c86d" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Fri May 25 15:08:40 2012 +0530" }, "committer": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Tue May 29 11:18:05 2012 +0530" }, "message": "ASoC: wcd9304: Fix wrong sample rate issue in RX2/RX3 channels\n\nThe default value of RX2/3_B5_CTL is wrong and resulting in wrong\nsample rate playback for headphone.\n\nChange-Id: Idf7d9bce1ee344677c48353fb3fe6a8f8bcc42ab\nCRs-Fixed: 361414\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n" }, { "commit": "1305babe26c42371c6551eb8238b0cf745726a15", "tree": "73e7e215bdb632a05b927b57c1ee98b1fb24d9c8", "parents": [ "2cc13f08cde4f2bc54f671ef0d4f07a86112bbf2" ], "author": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Mon May 21 15:08:42 2012 -0700" }, "committer": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Mon May 28 15:43:02 2012 -0700" }, "message": "ASoC: wcd9310: Don\u0027t request irq until MBHC is fully configured\n\nThere is a chance that MBHC irq is requested even before MBHC isn\u0027t fully\nconfigured when ACDB calibration data is downloaded from file system.\nMake sure to request irq after configuring MBHC to avoid unwanted early\nirq. If interrupt asserts too early, divide by zero exception can occur\nduring voltage calculation.\n\nCRs-fixed: 363895\nChange-Id: Ib7aecfe5892043d797aafbef49da617edc7ac205\nSigned-off-by: Joonwoo Park \u003cjoonwoop@codeaurora.org\u003e\n" }, { "commit": "a3fe8df5d61bf52c971da8731ba536773c26c86d", "tree": "7d188dca41595267cba73fad1d287d61a83dac49", "parents": [ "878f54913a5d9708ed21469da5d679d8b6a9fc07", "b20f636d620e85a07cb198ab010b95a7a236e80b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon May 28 12:31:17 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon May 28 12:31:17 2012 -0700" }, "message": "Merge \"arm/dt: Add RPM regulator devices for MSM Copper\" into msm-3.0" }, { "commit": "878f54913a5d9708ed21469da5d679d8b6a9fc07", "tree": "900cbca29dd2b2b46d9cd6b3eccccd80af7edac2", "parents": [ "ac17ef65da1eafc9ba5ce3002fa331c6cb4e0915", "8f4cebc63f9e62d64e74a34b3189b63b69f98303" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon May 28 12:31:14 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon May 28 12:31:14 2012 -0700" }, "message": "Merge changes I766109c9,I0417d52b into msm-3.0\n\n* changes:\n msm: board-copper: Call rpm-regulator-smd init function\n msm: Add rpm-regulator-smd driver to support RPM regulators over SMD\n" }, { "commit": "fa853b91ddfe4ac5eb9c77f9c409223d9b3cc0e4", "tree": "e30be751a8a9a5f24ca7335f69da6dcc96e52d80", "parents": [ "ac17ef65da1eafc9ba5ce3002fa331c6cb4e0915" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Fri May 25 13:24:52 2012 -0700" }, "committer": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Mon May 28 10:19:42 2012 -0700" }, "message": "msm_fb: display: Add MDP IOMMU detach support for DTV\n\nIOMMU detach support on suspend is currently meant for DSI Video\nand LCDC modes. The detach call is moved to early suspend for primary\ndisplay and external DTV to avoid page faults related to\nsuspend/resume cases.\n\nChange-Id: Ia45071c44c20b951a328f39a033bdd83ff77d8f8\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\n" }, { "commit": "ac17ef65da1eafc9ba5ce3002fa331c6cb4e0915", "tree": "4cfa97429ff3c73f28dc55f3b505f338d4e06c16", "parents": [ "48de6c78070e43b3ae3a0bcc531409fae8286d77", "f886c80ee2f4c29aeaab2d76c9303c00263bb428" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon May 28 09:41:29 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon May 28 09:41:29 2012 -0700" }, "message": "Merge \"mmc: support BKOPS feature for eMMC v4.5\" into msm-3.0" } ], "next": "5b1e6f1afb70ace03b32b48d4d70f34302decdc2" }