)]}'
{
  "log": [
    {
      "commit": "21e0534ad7415559bb8dee0dc00e39646fed83c9",
      "tree": "e9e082dfdf6ce9798d6201f1ae4109b68b11920a",
      "parents": [
        "ecd177c21640e92b059a71139f5850243a8f0942"
      ],
      "author": {
        "name": "Hauke Mehrtens",
        "email": "hauke@hauke-m.de",
        "time": "Sat Jul 23 01:20:09 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Aug 08 14:29:26 2011 -0400"
      },
      "message": "bcma: add mips driver\n\nThis adds a mips driver to bcma. This is only found on embedded\ndevices. For now the driver just initializes the irqs used on this\nsystem.\n\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nAcked-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "ecd177c21640e92b059a71139f5850243a8f0942",
      "tree": "70ed92f7b63087bec0a6036dca1c81403d65c86d",
      "parents": [
        "517f43e5a922d51ac960424de4f72676fe6a7390"
      ],
      "author": {
        "name": "Hauke Mehrtens",
        "email": "hauke@hauke-m.de",
        "time": "Sat Jul 23 01:20:08 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Aug 08 14:29:25 2011 -0400"
      },
      "message": "bcma: add SOC bus\n\nThis patch adds support for using bcma on a Broadcom SoC as the system\nbus. An SoC like the bcm4716 could register this bus and use it to\nsearches for the bcma cores and register the devices on this bus.\n\nBCMA_HOSTTYPE_NONE was intended for SoCs at first but BCMA_HOSTTYPE_SOC\nis a better name.\n\nAcked-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nAcked-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "9352f69c9194f1dcb3e096377e5c4804ab1bb5fb",
      "tree": "a7159ee211970fe0c75fa1a864c39d3ebc5c731b",
      "parents": [
        "f0c717e6b7ac032e89611fa7629a1fff57e7667a"
      ],
      "author": {
        "name": "Rafał Miłecki",
        "email": "zajec5@gmail.com",
        "time": "Tue Jul 05 19:48:26 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Thu Jul 07 13:13:34 2011 -0400"
      },
      "message": "bcma: detect PCI core working in hostmode\n\nWe must not init it like clientmode one, it would break device (tested\nby Hauke on BCM4718). Add stub hostmode driver for now.\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: Hauke Mehrtens \u003chauke@hauke-m.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "9d75ef0f8f6d2e31ed940b3057a42a25f07076fb",
      "tree": "712c09addf9f229bf25593e6f9f8a8d7d6d94859",
      "parents": [
        "505fb019d4924e425bb1024eb603a7bc7fe7fe63"
      ],
      "author": {
        "name": "Rafał Miłecki",
        "email": "zajec5@gmail.com",
        "time": "Fri May 20 03:27:06 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Jun 01 15:12:28 2011 -0400"
      },
      "message": "bcma: host pci: implement block R/W operations\n\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "8369ae33b705222aa05ab53c7d6b4458f4ed161b",
      "tree": "ce5d592a63134f1283473bc900bf59489b92d8eb",
      "parents": [
        "306fe9384f06d31219778cece2d3c646146e7bb6"
      ],
      "author": {
        "name": "Rafał Miłecki",
        "email": "zajec5@gmail.com",
        "time": "Mon May 09 18:56:46 2011 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue May 10 15:54:54 2011 -0400"
      },
      "message": "bcma: add Broadcom specific AMBA bus driver\n\nBroadcom has released cards based on a new AMBA-based bus type. From a\nprogramming point of view, this new bus type differs from AMBA and does\nnot use AMBA common registers. It also differs enough from SSB. We\ndecided that a new bus driver is needed to keep the code clean.\n\nIn its current form, the driver detects devices present on the bus and\nregisters them in the system. It allows registering BCMA drivers for\nspecified bus devices and provides them basic operations. The bus driver\nitself includes two important bus managing drivers: ChipCommon core\ndriver and PCI(c) core driver. They are early used to allow correct\ninitialization.\n\nCurrently code is limited to supporting buses on PCI(e) devices, however\nthe driver is designed to be used also on other hosts. The host\nabstraction layer is implemented and already used for PCI(e).\n\nSupport for PCI(e) hosts is working and seems to be stable (access to\n80211 core was tested successfully on a few devices). We can still\noptimize it by using some fixed windows, but this can be done later\nwithout affecting any external code. Windows are just ranges in MMIO\nused for accessing cores on the bus.\n\nCc: Greg KH \u003cgreg@kroah.com\u003e\nCc: Michael Büsch \u003cmb@bu3sch.de\u003e\nCc: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nCc: George Kashperko \u003cgeorge@znau.edu.ua\u003e\nCc: Arend van Spriel \u003carend@broadcom.com\u003e\nCc: linux-arm-kernel@lists.infradead.org\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nCc: Arnd Bergmann \u003carnd@arndb.de\u003e\nCc: Andy Botting \u003candy@andybotting.com\u003e\nCc: linuxdriverproject \u003cdevel@linuxdriverproject.org\u003e\nCc: linux-kernel@vger.kernel.org \u003clinux-kernel@vger.kernel.org\u003e\nSigned-off-by: Rafał Miłecki \u003czajec5@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    }
  ]
}