)]}'
{
  "log": [
    {
      "commit": "280ad7fda5f95211857fda38960f2b6fdf6edd3e",
      "tree": "1f0296da35b5427a932aa333bce1a6de114fe0b5",
      "parents": [
        "964dba283439a4db50dae61d3afe6e438b7fc30f"
      ],
      "author": {
        "name": "Grant Likely",
        "email": "grant.likely@secretlab.ca",
        "time": "Fri Feb 24 14:58:54 2012 -0700"
      },
      "committer": {
        "name": "Grant Likely",
        "email": "grant.likely@secretlab.ca",
        "time": "Sun Feb 26 16:48:06 2012 -0700"
      },
      "message": "mfd: twl-core: Add IRQ_DOMAIN dependency\n\nTWL4030 depends on IRQ_DOMAIN support, so this patch selects it in Kconfig.\nIt used to be that CONFIG_IRQ_DOMAIN must only be selected by the architecture,\nbut recent cleanups have fixed it so that it is safe to select from anywhere.\n\nSigned-off-by: Benoit Cousson \u003cb-cousson@ti.com\u003e\n[grant.likely: Changed from a depends to a select]\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nCc: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "6252547b8a7acced581b649af4ebf6d65f63a34b",
      "tree": "451bcae38a1607083e6f1a803bc840ec96b5e351",
      "parents": [
        "40410715715178ec196314dd0c19150c06901f80"
      ],
      "author": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Tue Feb 07 09:47:21 2012 +0000"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Thu Feb 09 17:56:53 2012 +0000"
      },
      "message": "ARM: omap: fix broken twl-core dependencies and ifdefs\n\nIn commit aeb5032b3f, a dependency on IRQ_DOMAIN was added, which causes\nregressions on previously working setups: a previously working non-DT\nkernel configuration now loses its PMIC support.  The lack of PMIC\nsupport in turn causes the loss of other functionality the kernel had.\n\nThis dependency was added because the driver now registers its\ninterrupts with the IRQ domain code, presumably to prevent a build error.\n\nThe result is that OMAP3 oopses in the vp.c code (fixed by a previous\ncommit) due to the lack of PMIC support.\n\nHowever, even with IRQ_DOMAIN enabled, the driver oopses:\n\nUnable to handle kernel NULL pointer dereference at virtual address 00000000\npgd \u003d c0004000\n[00000000] *pgd\u003d00000000\nInternal error: Oops: 5 [#1] SMP\nModules linked in:\nCPU: 1    Not tainted  (3.3.0-rc2+ #271)\nPC is at irq_domain_add+0x1c/0x134\nLR is at twl_probe+0xd0/0x370\npc : [\u003cc007bad0\u003e]    lr : [\u003cc029baac\u003e]    psr: 00000113\nsp : df843c48  ip : df843c68  fp : df843c64\nr10: c02b93e4  r9 : 00000000  r8 : c029b9dc\nr7 : df9d8a00  r6 : c03bef90  r5 : 00000000  r4 : c03f5240\nr3 : 00000000  r2 : c03f5240  r1 : 00000015  r0 : c03f5240\nFlags: nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel\nControl: 10c5387d  Table: 8000404a  DAC: 00000015\nProcess swapper/0 (pid: 1, stack limit \u003d 0xdf8422f0)\nStack: (0xdf843c48 to 0xdf844000)\n3c40:                   00000014 00000170 00000014 c03bef90 df843c9c df843c68\n3c60: c029baac c007bac0 00000000 df9d8a20 00000001 c03cd238 c02b93e4 df9d8a20\n3c80: df9d8a04 df9d8a00 c029b9dc df8cae08 df843cc4 df843ca0 c01eee70 c029b9e8\n...\nBacktrace:\n[\u003cc007bab4\u003e] (irq_domain_add+0x0/0x134) from [\u003cc029baac\u003e] (twl_probe+0xd0/0x370)\n r6:c03bef90 r5:00000014 r4:00000170\n[\u003cc029b9dc\u003e] (twl_probe+0x0/0x370) from [\u003cc01eee70\u003e] (i2c_device_probe+0xb0/0xe4)\n[\u003cc01eedc0\u003e] (i2c_device_probe+0x0/0xe4) from [\u003cc01d1f34\u003e] (really_probe+0xa0/0x178)\n r8:df8f0070 r7:c03cd238 r6:df9d8a20 r5:df9d8a20 r4:df9d8a20\n[\u003cc01d1e94\u003e] (really_probe+0x0/0x178) from [\u003cc01d205c\u003e] (driver_probe_device+0x50/0x68)\n r7:df843d18 r6:df9d8a20 r5:c03cd238 r4:df9d8a20\n[\u003cc01d200c\u003e] (driver_probe_device+0x0/0x68) from [\u003cc01d2148\u003e] (__device_attach+0x44/0x48)\n r5:df9d8a20 r4:c03cd238\n[\u003cc01d2104\u003e] (__device_attach+0x0/0x48) from [\u003cc01d0840\u003e] (bus_for_each_drv+0x58/0x98)\n r5:c01d2104 r4:00000000\n[\u003cc01d07e8\u003e] (bus_for_each_drv+0x0/0x98) from [\u003cc01d21f8\u003e] (device_attach+0x80/0xac)\n r7:df9d8a28 r6:df9d8a54 r5:c03cd978 r4:df9d8a20\n[\u003cc01d2178\u003e] (device_attach+0x0/0xac) from [\u003cc01d1430\u003e] (bus_probe_device+0x34/0xa4)\n r6:df9d8a20 r5:c03cd978 r4:df9d8a20\n[\u003cc01d13fc\u003e] (bus_probe_device+0x0/0xa4) from [\u003cc01cffb0\u003e] (device_add+0x2a0/0x420)\n r6:00000000 r5:df9d8a20 r4:df9d8a20\n[\u003cc01cfd10\u003e] (device_add+0x0/0x420) from [\u003cc01d0150\u003e] (device_register+0x20/0x24)\n r8:df9d8a00 r7:df9d8a04 r6:df8f0048 r5:df9d8a00 r4:df9d8a20\n[\u003cc01d0130\u003e] (device_register+0x0/0x24) from [\u003cc01ef8d4\u003e] (i2c_new_device+0x118/0x180)\n r4:df9d8a20\n[\u003cc01ef7bc\u003e] (i2c_new_device+0x0/0x180) from [\u003cc01efc88\u003e] (i2c_register_adapter+0x140/0x204)\n r8:c03cd970 r7:00000000 r6:df8f0070 r5:df8a6300 r4:df8f0048\n[\u003cc01efb48\u003e] (i2c_register_adapter+0x0/0x204) from [\u003cc01efe9c\u003e] (i2c_add_numbered_adapter+0xb4/0xcc)\n r8:df8a4c54 r7:df8cae00 r6:df843e2c r5:df8f0048 r4:00000000\n[\u003cc01efde8\u003e] (i2c_add_numbered_adapter+0x0/0xcc) from [\u003cc029ce1c\u003e] (omap_i2c_probe+0x2f8/0x3b4)\n r6:00000000 r5:df8f0000 r4:df8f0070\n[\u003cc029cb24\u003e] (omap_i2c_probe+0x0/0x3b4) from [\u003cc01d3484\u003e] (platform_drv_probe+0x20/0x24)\n[\u003cc01d3464\u003e] (platform_drv_probe+0x0/0x24) from [\u003cc01d1f34\u003e] (really_probe+0xa0/0x178)\n[\u003cc01d1e94\u003e] (really_probe+0x0/0x178) from [\u003cc01d205c\u003e] (driver_probe_device+0x50/0x68)\n r7:df843ef0 r6:c03cdb2c r5:c03cdb2c r4:df8cae08\n[\u003cc01d200c\u003e] (driver_probe_device+0x0/0x68) from [\u003cc01d20e0\u003e] (__driver_attach+0x6c/0x90)\n r5:df8cae3c r4:df8cae08\n[\u003cc01d2074\u003e] (__driver_attach+0x0/0x90) from [\u003cc01d08d8\u003e] (bus_for_each_dev+0x58/0x98)\n r6:c03cdb2c r5:c01d2074 r4:00000000\n[\u003cc01d0880\u003e] (bus_for_each_dev+0x0/0x98) from [\u003cc01d1d80\u003e] (driver_attach+0x20/0x28)\n r7:df880b80 r6:c03cdb2c r5:c03cdb2c r4:c0394f28\n[\u003cc01d1d60\u003e] (driver_attach+0x0/0x28) from [\u003cc01d115c\u003e] (bus_add_driver+0xb4/0x230)\n[\u003cc01d10a8\u003e] (bus_add_driver+0x0/0x230) from [\u003cc01d278c\u003e] (driver_register+0xc8/0x154)\n[\u003cc01d26c4\u003e] (driver_register+0x0/0x154) from [\u003cc01d37e4\u003e] (platform_driver_register+0x4c/0x60)\n r8:00000000 r7:00000013 r6:c00384c8 r5:c0395180 r4:c0394f28\n[\u003cc01d3798\u003e] (platform_driver_register+0x0/0x60) from [\u003cc038626c\u003e] (omap_i2c_init_driver+0x14/0x1c)\n[\u003cc0386258\u003e] (omap_i2c_init_driver+0x0/0x1c) from [\u003cc00087b8\u003e] (do_one_initcall+0x9c/0x164)\n[\u003cc000871c\u003e] (do_one_initcall+0x0/0x164) from [\u003cc036c2f4\u003e] (kernel_init+0x90/0x138)\n[\u003cc036c264\u003e] (kernel_init+0x0/0x138) from [\u003cc00384c8\u003e] (do_exit+0x0/0x2ec)\n r5:c036c264 r4:00000000\n\u003c0\u003eCode: e24dd004 e5903014 e1a04000 e5905010 (e5933000)\n\u003c4\u003e---[ end trace 1b75b31a2719ed1c ]---\n\nThis happens because we try to register an IRQ domain with a NULL ops\nstructure, and the first thing irq_domain_add() does is try to\ndereference this ops structure.\n\nSo, fix the problem by getting rid of the incorrect OF_IRQ ifdef and\nwrapping the IRQ domain bits of the driver with an IRQ_DOMAIN ifdef\ninstead.\n\nAcked-by: Tony Lindgren \u003ctony@atomide.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "21ebd6c68b5511b55f4f456e4ba17c2d711e3617",
      "tree": "2f4f98568a7a52ab6734fb190d0cbf6f9c1c6492",
      "parents": [
        "4b8be38cf782f8ebebc089083fa0572ade79d7ca",
        "74d836c4142e5d100f8d9a1b2ee3003c2ed7109d"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Jan 13 20:43:32 2012 -0800"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Jan 13 20:43:32 2012 -0800"
      },
      "message": "Merge branch \u0027for-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6\n\n* \u0027for-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits)\n  rtc: max8925: Add function to work as wakeup source\n  mfd: Add pm ops to max8925\n  mfd: Convert aat2870 to dev_pm_ops\n  mfd: Still check other interrupts if we get a wm831x touchscreen IRQ\n  mfd: Introduce missing kfree in 88pm860x probe routine\n  mfd: Add S5M series configuration\n  mfd: Add s5m series irq driver\n  mfd: Add S5M core driver\n  mfd: Improve mc13xxx dt binding document\n  mfd: Fix stmpe section mismatch\n  mfd: Fix stmpe build warning\n  mfd: Fix STMPE I2c build failure\n  mfd: Constify aat2870-core i2c_device_id table\n  gpio: Add support for stmpe variant 801\n  mfd: Add support for stmpe variant 801\n  mfd: Add support for stmpe variant 610\n  mfd: Add support for STMPE SPI interface\n  mfd: Separate out STMPE controller and interface specific code\n  misc: Remove max8997-muic sysfs attributes\n  mfd: Remove unused wm831x_irq_data_to_mask_reg()\n  ...\n\nFix up trivial conflict in drivers/leds/Kconfig due to addition of\nLEDS_MAX8997 and LEDS_TCA6507 next to each other.\n"
    },
    {
      "commit": "a429638cac1e5c656818a45aaff78df7b743004e",
      "tree": "0465e0d7a431bff97a3dd5a1f91d9b30c69ae0d8",
      "parents": [
        "5cf9a4e69c1ff0ccdd1d2b7404f95c0531355274",
        "9e4ce164ee3a1d07580f017069c25d180b0aa785"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Jan 12 08:00:30 2012 -0800"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Jan 12 08:00:30 2012 -0800"
      },
      "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (526 commits)\n  ASoC: twl6040 - Add method to query optimum PDM_DL1 gain\n  ALSA: hda - Fix the lost power-setup of seconary pins after PM resume\n  ALSA: usb-audio: add Yamaha MOX6/MOX8 support\n  ALSA: virtuoso: add S/PDIF input support for all Xonars\n  ALSA: ice1724 - Support for ooAoo SQ210a\n  ALSA: ice1724 - Allow card info based on model only\n  ALSA: ice1724 - Create capture pcm only for ADC-enabled configurations\n  ALSA: hdspm - Provide unique driver id based on card serial\n  ASoC: Dynamically allocate the rtd device for a non-empty release()\n  ASoC: Fix recursive dependency due to select ATMEL_SSC in SND_ATMEL_SOC_SSC\n  ALSA: hda - Fix the detection of \"Loopback Mixing\" control for VIA codecs\n  ALSA: hda - Return the error from get_wcaps_type() for invalid NIDs\n  ALSA: hda - Use auto-parser for HP laptops with cx20459 codec\n  ALSA: asihpi - Fix potential Oops in snd_asihpi_cmode_info()\n  ALSA: hdsp - Fix potential Oops in snd_hdsp_info_pref_sync_ref()\n  ALSA: hda/cirrus - support for iMac12,2 model\n  ASoC: cx20442: add bias control over a platform provided regulator\n  ALSA: usb-audio - Avoid flood of frame-active debug messages\n  ALSA: snd-usb-us122l: Delete calls to preempt_disable\n  mfd: Put WM8994 into cache only mode when suspending\n  ...\n\nFix up trivial conflicts in:\n - arch/arm/mach-s3c64xx/mach-crag6410.c:\n\trenamed speyside_wm8962 to tobermory, added littlemill right\n\tnext to it\n - drivers/base/regmap/{regcache.c,regmap.c}:\n\tduplicate diff that had already come in with other changes in\n\tthe regmap tree\n"
    },
    {
      "commit": "c3d4d697346e36304a94942ad8ed3e28a0d38a44",
      "tree": "bd06460c7d0d34620a3e35c413bfd944581c1418",
      "parents": [
        "5ac2ffa7d73272cd0a5cde74628a1ed63c93911f"
      ],
      "author": {
        "name": "Sangbeom Kim",
        "email": "sbkim73@samsung.com",
        "time": "Mon Jan 09 00:09:09 2012 +0100"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Mon Jan 09 00:37:47 2012 +0100"
      },
      "message": "mfd: Add S5M series configuration\n\nThis patch add Samsung S5M Kconfig and Makefile entry.\n\nSigned-off-by: Sangbeom Kim \u003csbkim73@samsung.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "eedea80fe07a1548e78b51d36188f6d0fc876658",
      "tree": "49fd5dd4563a789339a313717d7f9b677f98eae9",
      "parents": [
        "d4e948636bd1d9bdf07d38d63d324812725f9d88"
      ],
      "author": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Tue Dec 20 18:28:19 2011 +0100"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Mon Jan 09 00:37:45 2012 +0100"
      },
      "message": "mfd: Fix STMPE I2c build failure\n\nSTMPE i2c is a bool and should depend on I2c\u003dy.\nThat fixes:\n\ndrivers/built-in.o: In function `i2c_block_write\u0027:\nstmpe-i2c.c:(.text+0xf4553): undefined reference to\n+`i2c_smbus_write_i2c_block_data\u0027\ndrivers/built-in.o: In function `i2c_block_read\u0027:\nstmpe-i2c.c:(.text+0xf457f): undefined reference to\n+`i2c_smbus_read_i2c_block_data\u0027\ndrivers/built-in.o: In function `i2c_reg_write\u0027:\nstmpe-i2c.c:(.text+0xf45ab): undefined reference to\n`i2c_smbus_write_byte_data\u0027\ndrivers/built-in.o: In function `i2c_reg_read\u0027:\nstmpe-i2c.c:(.text+0xf45d4): undefined reference to `i2c_smbus_read_byte_data\u0027\ndrivers/built-in.o: In function `stmpe_init\u0027:\nstmpe-i2c.c:(.init.text+0xaf22): undefined reference to `i2c_register_driver\u0027\ndrivers/built-in.o: In function `stmpe_exit\u0027:\nstmpe-i2c.c:(.exit.text+0x5e5): undefined reference to `i2c_del_driver\u0027\n\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "e789995d5c612ecda83a9feb53fb2e42a51f685b",
      "tree": "48f8b41b35ed5d096df820230021dc1328a02f5a",
      "parents": [
        "1a6e4b7415339e3b11a87cff0d701b8a2e55f062"
      ],
      "author": {
        "name": "Viresh Kumar",
        "email": "viresh.kumar@st.com",
        "time": "Thu Nov 17 11:02:21 2011 +0530"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Mon Jan 09 00:37:43 2012 +0100"
      },
      "message": "mfd: Add support for STMPE SPI interface\n\nFew STMPE controller can have register interface over SPI or I2C. Current\nimplementation only supports I2C.\n\nThis patch adds support for SPI interface for accessing STMPE\u0027s address space.\n\nSigned-off-by: Viresh Kumar \u003cviresh.kumar@st.com\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "1a6e4b7415339e3b11a87cff0d701b8a2e55f062",
      "tree": "fbd5151ac34bf908826f4bbf8b298404660a8de1",
      "parents": [
        "71e58782d2e054798f91473f5452ffe65e2a5ff8"
      ],
      "author": {
        "name": "Viresh Kumar",
        "email": "viresh.kumar@st.com",
        "time": "Thu Nov 17 11:02:20 2011 +0530"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Mon Jan 09 00:37:42 2012 +0100"
      },
      "message": "mfd: Separate out STMPE controller and interface specific code\n\nFew STMPE controller can have register interface over SPI or I2C. Current\nimplementation only supports I2C and all code is present in a single file\nstmpe.c. It would be better to separate out I2C interface specific code from\ncontroller specific code. Later SPI specific code can be added in a separate\nfile.\n\nThis patch separates out I2C and controller specific code into separate files,\nmaking stmpe.c independent of I2C.\n\nSigned-off-by: Viresh Kumar \u003cviresh.kumar@st.com\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "aeb5032b3f8b9ab69daa545777433fa94b3494c4",
      "tree": "70a5ec2e43e0ae6c4e7d5793bf79da61c1ac7bf9",
      "parents": [
        "5391b5c645a86d4657c2175acbf21c6461d34849"
      ],
      "author": {
        "name": "Benoit Cousson",
        "email": "b-cousson@ti.com",
        "time": "Mon Aug 29 16:20:23 2011 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Mon Jan 09 00:37:40 2012 +0100"
      },
      "message": "mfd: twl-core: Add initial DT support for twl4030/twl6030\n\nAdd initial device-tree support for twl familly chips.\nThe current version is missing the regulator entries due\nto the lack of DT regulator bindings for the moment.\nOnly the simple sub-modules that do not depend on\nplatform_data information can be initialized properly.\n\nAdd irqdomain support.\n\nAdd documentation for the Texas Instruments TWL Integrated Chip.\n\nSigned-off-by: Benoit Cousson \u003cb-cousson@ti.com\u003e\nCc: Balaji T K \u003cbalajitk@ti.com\u003e\nCc: Graeme Gregory \u003cgg@slimlogic.co.uk\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nAcked-by: Rob Herring \u003crob.herring@calxeda.com\u003e\n[grant.likely@secretlab.ca: Fix IRQ_DOMAIN dependency in kconfig]\nCc: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n"
    },
    {
      "commit": "e959da1020062b840d3b9fcf16287e3034845bca",
      "tree": "ad4bcec2933babe2fca4c717e646068661418771",
      "parents": [
        "aa05c9cf5e6e7266588468d9683d7c38fb8022d6"
      ],
      "author": {
        "name": "Christoph Fritz",
        "email": "chf.fritz@googlemail.com",
        "time": "Tue Nov 29 19:38:38 2011 +0100"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Mon Jan 09 00:37:36 2012 +0100"
      },
      "message": "mfd: Add a dependency on HAVE_CLK for tc6393xb\n\ntc6393xb calls the clk API.\n\nSigned-off-by: Christoph Fritz \u003cchf.fritz@googlemail.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "b46a36c0e0adc92c8be2c8a6fa68d979f6eee124",
      "tree": "8553651cc4963fdeb4e2c56f39e69889baf1f399",
      "parents": [
        "5bdf7411bc2329cfe015ba6dcf59531e0c6891b8"
      ],
      "author": {
        "name": "Jett.Zhou",
        "email": "jtzhou@marvell.com",
        "time": "Fri Nov 11 15:38:27 2011 +0800"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Mon Jan 09 00:37:30 2012 +0100"
      },
      "message": "mfd: Convert 88pm860x to use regmap api\n\nConvert the 88pm860x normal bank register read/write to\nuse the register map API.\n\nSigned-off-by: Jett.Zhou \u003cjtzhou@marvell.com\u003e\nReviewed-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "cfe04478fa1b472264b7fe9bbf547710aa344d3c",
      "tree": "0259b83d413552449affef04af574aa4e6635468",
      "parents": [
        "84c99db879314d58e0064f02b481f668f45d0070"
      ],
      "author": {
        "name": "Ashish Jangam",
        "email": "ashish.jangam@kpitcummins.com",
        "time": "Mon Dec 12 20:37:41 2011 +0530"
      },
      "committer": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Wed Dec 14 19:53:45 2011 +0800"
      },
      "message": "MFD: DA9052/53 MFD core module add SPI support v2\n\nThis patch add SPI support for DA9052/53 MFD core module.\n\nThis patch is functionally tested on Samsung SMDKV6410.\n\nSigned-off-by: David Dajun Chen \u003cdchen@diasemi.com\u003e\nSigned-off-by: Ashish Jangam \u003cashish.jangam@kpitcummins.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n"
    },
    {
      "commit": "84c99db879314d58e0064f02b481f668f45d0070",
      "tree": "267728e9f324d478c870182587bdae87d3348501",
      "parents": [
        "ce37954e93e9e85333577dcc22db5a4d0f4c9d5e"
      ],
      "author": {
        "name": "Ashish Jangam",
        "email": "ashish.jangam@kpitcummins.com",
        "time": "Mon Dec 12 20:06:56 2011 +0530"
      },
      "committer": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Wed Dec 14 19:53:32 2011 +0800"
      },
      "message": "MFD: DA9052/53 MFD core module\n\nThe DA9052/53 is a highly integrated PMIC subsystem with supply domain\nflexibility to support wide range of high performance application.\n\nIt provides voltage regulators, GPIO controller, Touch Screen, RTC, Battery\ncontrol and other functionality.\n\nThis patch is functionally tested on Samsung SMDKV6410.\n\nSigned-off-by: David Dajun Chen \u003cdchen@diasemi.com\u003e\nSigned-off-by: Ashish Jangam \u003cashish.jangam@kpitcummins.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n"
    },
    {
      "commit": "8ab30691826fc05efa47c4ffba19b80496bb3a2c",
      "tree": "b1c405e1eebfd3127ccb5aba5c71eb547bc59687",
      "parents": [
        "e292b578c9bd587ad8fe230aa0500bde7be3c68a"
      ],
      "author": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Tue Oct 25 10:19:04 2011 +0200"
      },
      "committer": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Tue Dec 13 00:14:06 2011 +0800"
      },
      "message": "mfd: Convert wm8994 to use generic regmap irq_chip\n\nFactor out the irq_chip implementation, substantially reducing the code\nsize for the driver.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "a0a4194c943bc64dd7b6e26cccb036cb26b81363",
      "tree": "4282f0dd573344d10f69616eb05868b5cd563cc1",
      "parents": [
        "cf0223503e6198292cdcc864e01eeb5fe7490752",
        "b958f7a7cbdfbf59ba61de7ebb9c59b0ee3a7967"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Nov 03 09:40:51 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Nov 03 09:40:51 2011 -0700"
      },
      "message": "Merge branch \u0027for-next\u0027 of git://git.infradead.org/users/sameo/mfd-2.6\n\n* \u0027for-next\u0027 of git://git.infradead.org/users/sameo/mfd-2.6: (80 commits)\n  mfd: Fix missing abx500 header file updates\n  mfd: Add missing \u003clinux/io.h\u003e include to intel_msic\n  x86, mrst: add platform support for MSIC MFD driver\n  mfd: Expose TurnOnStatus in ab8500 sysfs\n  mfd: Remove support for early drop ab8500 chip\n  mfd: Add support for ab8500 v3.3\n  mfd: Add ab8500 interrupt disable hook\n  mfd: Convert db8500-prcmu panic() into pr_crit()\n  mfd: Refactor db8500-prcmu request_clock() function\n  mfd: Rename db8500-prcmu init function\n  mfd: Fix db5500-prcmu defines\n  mfd: db8500-prcmu voltage domain consumers additions\n  mfd: db8500-prcmu reset code retrieval\n  mfd: db8500-prcmu tweak for modem wakeup\n  mfd: Add db8500-pcmu watchdog accessor functions for watchdog\n  mfd: hwacc power state db8500-prcmu accessor\n  mfd: Add db8500-prcmu accessors for PLL and SGA clock\n  mfd: Move to the new db500 PRCMU API\n  mfd: Create a common interface for dbx500 PRCMU drivers\n  mfd: Initialize DB8500 PRCMU regs\n  ...\n\nFix up trivial conflicts in\n\tarch/arm/mach-imx/mach-mx31moboard.c\n\tarch/arm/mach-omap2/board-omap3beagle.c\n\tarch/arm/mach-u300/include/mach/irqs.h\n\tdrivers/mfd/wm831x-spi.c\n"
    },
    {
      "commit": "8959e74399c798b45c0f5d477972b927c28f8dc9",
      "tree": "d13209e52a68649cd923f946649c8b3add0d52af",
      "parents": [
        "94be70d4b279ba1b35119a3340833ffcc798c2e2"
      ],
      "author": {
        "name": "Linus Walleij",
        "email": "linus.walleij@linaro.org",
        "time": "Mon Sep 26 11:45:30 2011 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Mon Oct 24 14:09:16 2011 +0200"
      },
      "message": "mfd: Delete ab3550 driver\n\nThe AB3550 never passed the prototype stage. Instead it was used\nas a precursor to AB5500 for testing basic building blocks used\nin that chip, since they had large similarities. Since AB3550 will\nnot see the light of day in product form and since the prototypes\nare no longer used, let\u0027s delete the driver and any references to\nit.\n\nCc: Mattias Wallin \u003cmattias.wallin@stericsson.com\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "94be70d4b279ba1b35119a3340833ffcc798c2e2",
      "tree": "b447c0c927d8403895e44f9f42e9e436ed9210c7",
      "parents": [
        "b7ddac53df5097e8437ca40316caf79885d31946"
      ],
      "author": {
        "name": "Linus Walleij",
        "email": "linus.walleij@linaro.org",
        "time": "Thu Sep 22 08:22:33 2011 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Mon Oct 24 14:09:16 2011 +0200"
      },
      "message": "mfd: Break out ab5500 debugfs code\n\nThis breaks the debugfs portions of the AB5500 driver into its own\nfile. Split off a _raw function to access registers since we don\u0027t\nwant to expose a generically named function globally. Move all\nrequired data structures to a shared ab5500-core.h file.\n\nCc: Mattias Wallin \u003cmattias.wallin@stericsson.com\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "3d5e2cabf11a65685e5067382ba4c4a76f18fcb7",
      "tree": "361913524dfa8e74003a39c8691306974a3ca9df",
      "parents": [
        "677df0c9012ca3a6e0081f29f81506e5578d74f3"
      ],
      "author": {
        "name": "Mattias Wallin",
        "email": "mattias.wallin@stericsson.com",
        "time": "Thu Sep 22 08:22:18 2011 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Mon Oct 24 14:09:16 2011 +0200"
      },
      "message": "mfd: ab5500 chip register access\n\nThe analog baseband chip ab5500 is a multi functional chip\ncontaining regulators, charging, gpio, USB and accessory detect.\nIt also contain various multimedia functionalities like digital\nencoder and audio codec.\nThe core driver added with this patch provides register access via\ni2c via PRCMU. Event handling implemented as irq_chip will come in\nfuture patches since it depends on PRCMU functionality not yet\nimplemented.\n\nSigned-off-by: Mattias Wallin \u003cmattias.wallin@stericsson.com\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "1f5a371c075a7101fe75a75cde5aad928460a42e",
      "tree": "3eea7a24339011a0cc75011f60352cf067dc23ce",
      "parents": [
        "429c9ecc76c096cab836060cd3219620437c3221"
      ],
      "author": {
        "name": "Mika Westerberg",
        "email": "mika.westerberg@linux.intel.com",
        "time": "Wed Sep 21 13:03:07 2011 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Mon Oct 24 14:09:15 2011 +0200"
      },
      "message": "mfd: Add Intel MSIC driver\n\nAdd support for Intel MSIC chip found on Intel Medfield platforms. This\nchip embeds several subdevices: audio, ADC, GPIO, power button, etc. The\ndriver creates platform device for each subdevice.\n\nWe also provide an MSIC register access API which should replace the more\ngeneric SCU IPC interface currently used. Existing drivers can choose\nwhether they convert to this new API or stick with the SCU IPC interface.\n\nSigned-off-by: Mika Westerberg \u003cmika.westerberg@linux.intel.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "8a0a8e8e42a4e30a1fc4c40205fa790e264d00f3",
      "tree": "beec367a4124f66e803a2c24f9f3345aa7297721",
      "parents": [
        "b46880e57b4c513adeb2608c3700b352860b5662"
      ],
      "author": {
        "name": "Arnd Bergmann",
        "email": "arnd@arndb.de",
        "time": "Fri Sep 02 16:43:36 2011 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Mon Oct 24 14:09:13 2011 +0200"
      },
      "message": "mfd: remove CONFIG_MFD_SUPPORT\n\nWe currently have two symbols to control compilation the MFD subsystem,\nMFD_SUPPORT and MFD_CORE. The MFD_SUPPORT is actually not required\nat all, it only hides the submenu when not set, with the effect that\nKconfig warns about missing dependencies when another driver selects\nan MFD driver while MFD_SUPPORT is disabled. Turning the MFD submenu\nback from menuconfig into a plain menu simplifies the Kconfig syntax\nfor those kinds of users and avoids the surprise when the menu\nsuddenly appears because another driver was enabled that selects this\nsymbol.\n\nSigned-off-by: Arnd Bergmann \u003carnd@arndb.de\u003e\n"
    },
    {
      "commit": "2b247d06c6148bfe34a431431064f5553b17f0cc",
      "tree": "771567a3d931f183fe421eb4a9d690c965dd2b76",
      "parents": [
        "925e853c24bc7966cb0d6ed3b88948c33b0a6071"
      ],
      "author": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Tue Aug 23 18:56:19 2011 +0100"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Mon Oct 24 14:09:12 2011 +0200"
      },
      "message": "mfd: Select REGMAP_I2C from WM8400\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "6e3ad118041f56db752a5eb2b557517d14592af7",
      "tree": "a19fb9c05cd0fdf46824b367844d689fe6030f5b",
      "parents": [
        "d036c96e703c176250503194f4fcd8b96e606b52"
      ],
      "author": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Mon Aug 08 17:04:40 2011 +0900"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Mon Oct 24 14:09:08 2011 +0200"
      },
      "message": "mfd: Convert pcf50633 to use new register map API\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nTested-by: Lars-Peter Clausen \u003clars@metafoo.de\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "d6c645fc00777a6f8a7df1f580065ec30c71be7b",
      "tree": "0dba18686fbfac44b7123b2a29b5b8e75b761346",
      "parents": [
        "5570c2f709bdc455a2e8907919c1214ca8a21859"
      ],
      "author": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Fri Jun 17 13:02:27 2011 +0100"
      },
      "committer": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Mon Aug 22 12:25:15 2011 +0100"
      },
      "message": "mfd: Convert WM8994 to use new register map API\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "1df5981b82d9eabdd6e66d1d9514164c02329345",
      "tree": "c5fc2653d70a884d42957b2c7bc0c8cd49d8b895",
      "parents": [
        "bd20eb541ebbb17a5e047cd20e74b9ccf19a4123"
      ],
      "author": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Fri Jun 10 19:28:10 2011 +0100"
      },
      "committer": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Mon Aug 22 12:23:22 2011 +0100"
      },
      "message": "mfd: Convert WM831x to use regmap API\n\nFactor out the register read/write code to use the register map API.  We\nstill need some wm831x specific code and locking in place to check that\nthe user key is handled correctly but only on the write side, reads are\nnot affected by the key.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "09d6292befba8c6319d9471803149573ea6ed170",
      "tree": "1de1bda81b4ca3844e80a6041e0ccefbc5db1628",
      "parents": [
        "7785bf11f312624101462d7dc840e27344899873"
      ],
      "author": {
        "name": "Jin Park",
        "email": "jinyoungp@nvidia.com",
        "time": "Mon Jul 04 19:48:12 2011 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Sun Jul 31 23:28:26 2011 +0200"
      },
      "message": "mfd: Add AAT2870 mfd driver\n\nAdd mfd core driver for AnalogicTech AAT2870.\nThe AAT2870 is communication through I2C and contains backlight and\nregulator components.\n\nSigned-off-by: Jin Park \u003cjinyoungp@nvidia.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "54f323b1325499574d92c85201971df096c25b79",
      "tree": "b8e8ee84f2c8c858d322cbe2fdd2f17f4c8b1ecc",
      "parents": [
        "4dcaa6b6df354fa44b3072bed3cb13aad7e5fbd4"
      ],
      "author": {
        "name": "Linus Walleij",
        "email": "linus.walleij@stericsson.com",
        "time": "Mon Jul 04 17:34:16 2011 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Sun Jul 31 23:28:25 2011 +0200"
      },
      "message": "mfd: Move TPS55910 Kconfig option\n\nHaving another TPS chip at the end of the Kconfig when all it\u0027s\nrelatives are grouped together in their own section seems totally\ncounter-intuitive. Move it, also in the Makefile.\n\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "5608801baf0ffd06a428de3496fa10b3b7d789e9",
      "tree": "6c9b71f833ae4d73bcc0f8448ca648f11b026e46",
      "parents": [
        "08256712a2705f3ced3e54c3728932c9c39b58ad"
      ],
      "author": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Wed Jun 22 14:53:58 2011 +0100"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Sun Jul 31 23:28:24 2011 +0200"
      },
      "message": "mfd: Don\u0027t ask about the TPS65912 core driver in Kconfig\n\nThe user has to select the I2C and SPI drivers individually and they select\nthe core driver for the device so there\u0027s no point in presenting the user\nwith an option for the core driver.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "36e52873c6393b569f2befcdd1847929211892b8",
      "tree": "dbc25ce026ec1bfe69702766048db78c5e7e3702",
      "parents": [
        "8504d638041d50901b8bfba4fe646bd0bbb5cbb9"
      ],
      "author": {
        "name": "Margarita Olaya",
        "email": "magi@slimlogic.co.uk",
        "time": "Thu Jun 09 14:50:00 2011 -0500"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Sun Jul 31 23:28:22 2011 +0200"
      },
      "message": "mfd: tps65912: Add new mfd device\n\nThe tps65912 chip is a power management IC. It contains the following\ncomponents:\n\n- Regulators\n- GPIO controller\n\nThe core driver is registered as a platform driver, it provides communication\nthrough I2C and SPI interfaces.\n\nSigned-off-by: Margarita Olaya Cabrera \u003cmagi@slimlogic.co.uk\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nAcked-by: Liam Girdwood \u003clrg@ti.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "914e6d4e36015180bdcb6b99e96adc6293b7c2c6",
      "tree": "fc2f37fcb8ab369a5bcbdcb5c4a8877e01111f16",
      "parents": [
        "f85dbda076a11c18b396f8acfff929e53159e56d"
      ],
      "author": {
        "name": "Lars-Peter Clausen",
        "email": "lars@metafoo.de",
        "time": "Fri Jun 03 03:14:26 2011 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Sun Jul 31 23:28:21 2011 +0200"
      },
      "message": "mfd: Use generic irq chip for jz4740-adc\n\nUse the generic irq chip framework for implementing the irq chip for\nthe jz4740-adc driver.\n\nSigned-off-by: Lars-Peter Clausen \u003clars@metafoo.de\u003e\nCc: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "b0189cd087aa82bd23277cb5c8960ab030e13e5c",
      "tree": "7b1a4c152cd62ce136fd5b0e4379d58eb2244e66",
      "parents": [
        "69f1d1a6acbaa7d83ef3f4ee26209c58cd000204",
        "bc574e190d3fbed37d724e33a16aee326d6f2ac4"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jul 26 17:42:18 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jul 26 17:42:18 2011 -0700"
      },
      "message": "Merge branch \u0027next/devel2\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc\n\n* \u0027next/devel2\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (47 commits)\n  OMAP: Add debugfs node to show the summary of all clocks\n  OMAP2+: hwmod: Follow the recommended PRCM module enable sequence\n  OMAP2+: clock: allow per-SoC clock init code to prevent clockdomain calls from clock code\n  OMAP2+: clockdomain: Add per clkdm lock to prevent concurrent state programming\n  OMAP2+: PM: idle clkdms only if already in idle\n  OMAP2+: clockdomain: add clkdm_in_hwsup()\n  OMAP2+: clockdomain: Add 2 APIs to control clockdomain from hwmod framework\n  OMAP: clockdomain: Remove redundant call to pwrdm_wait_transition()\n  OMAP4: hwmod: Introduce the module control in hwmod control\n  OMAP4: cm: Add two new APIs for modulemode control\n  OMAP4: hwmod data: Add modulemode entry in omap_hwmod structure\n  OMAP4: hwmod data: Add PRM context register offset\n  OMAP4: prm: Remove deprecated functions\n  OMAP4: prm: Replace warm reset API with the offset based version\n  OMAP4: hwmod: Replace RSTCTRL absolute address with offset macros\n  OMAP: hwmod: Wait the idle status to be disabled\n  OMAP4: hwmod: Replace CLKCTRL absolute address with offset macros\n  OMAP2+: hwmod: Init clkdm field at boot time\n  OMAP4: hwmod data: Add clock domain attribute\n  OMAP4: clock data: Add missing divider selection for auxclks\n  ...\n"
    },
    {
      "commit": "8509e142567d69e170a184ecf27d7a6a3239fd72",
      "tree": "904bdbc1dde569b94b2c0cb7ee00cd5aa3f9246e",
      "parents": [
        "1e8ece5cb85361ac01c95aecdfdbfa5f8b7242af"
      ],
      "author": {
        "name": "Axel Lin",
        "email": "axel.lin@gmail.com",
        "time": "Thu Jun 23 10:15:51 2011 +0800"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Tue Jul 05 10:39:38 2011 +0200"
      },
      "message": "mfd: Add Makefile and Kconfig Entries for tps65911 comparator\n\nBase on Mark\u0027s comment [1], I make the Kconfig entry invisible to users.\n[1] https://lkml.org/lkml/2011/5/14/136\n\nSigned-off-by: Axel Lin \u003caxel.lin@gmail.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "f19b2823f82499c60ec15d5fe8783193d77e3043",
      "tree": "75148aed2558ec27ca87cf94e7ec3f398cd77e96",
      "parents": [
        "4ae6df5e1018796ce260be59b2c603bd0f9faa94"
      ],
      "author": {
        "name": "Misael Lopez Cruz",
        "email": "misael.lopez@ti.com",
        "time": "Wed Apr 27 02:14:07 2011 -0500"
      },
      "committer": {
        "name": "Peter Ujfalusi",
        "email": "peter.ujfalusi@ti.com",
        "time": "Mon Jul 04 19:34:37 2011 +0300"
      },
      "message": "mfd: twl6040: Add initial support\n\nTWL6040 IC provides analog high-end audio codec functions for\nhandset applications. It contains several audio analog inputs\nand outputs as well as vibrator support. It\u0027s connected to the\nhost processor via PDM interface for audio data communication.\nThe audio modules are controlled by internal registers that\ncan be accessed by I2C and PDM interface.\n\nTWL6040 MFD will be registered as a child of TWL-CORE, and will\nhave two children of its own: twl6040-codec and twl6040-vibra.\n\nThis driver is based on TWL4030 and WM8350 MFD drivers.\n\nSigned-off-by: Misael Lopez Cruz \u003cmisael.lopez@ti.com\u003e\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "57fe7251f5bfc4332f24479376de48a1e8ca6211",
      "tree": "d1276ed9201bf94d8a9c1d4cce0acd2b33a0138b",
      "parents": [
        "4fe5668b73d7ad041101656c98f3a58d86f68840"
      ],
      "author": {
        "name": "Peter Ujfalusi",
        "email": "peter.ujfalusi@ti.com",
        "time": "Tue May 31 12:02:49 2011 +0300"
      },
      "committer": {
        "name": "Peter Ujfalusi",
        "email": "peter.ujfalusi@ti.com",
        "time": "Mon Jul 04 18:43:56 2011 +0300"
      },
      "message": "MFD: twl4030-codec -\u003e twl4030-audio: Rename the driver\n\nRename the driver, and header file from twl4030-codec to\ntwl4030-audio.\nTo avoid breakage change depending drivers at the same time.\n\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\nCC: Misael Lopez Cruz \u003cmisael.lopez@ti.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "66c500ff36d74c6669ad260deda4ce8125b55304",
      "tree": "522352393c15472ecb2f7e22791d17a82160c060",
      "parents": [
        "1ed7891f8dcdba62041dfa265aea038afb49635c"
      ],
      "author": {
        "name": "Liam Girdwood",
        "email": "lrg@kernel.org",
        "time": "Fri May 27 22:13:08 2011 +0100"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Sat May 28 08:38:55 2011 +0200"
      },
      "message": "mfd: Fix build breakage caused by tps65910 gpio directory move\n\nSigned-off-by: Liam Girdwood \u003clrg@ti.com\u003e\nAcked-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "83545d836cf12a6381b530c5c7aeacf057f86aa9",
      "tree": "321ed6d645b70a10995228c9595669828c5f8d9a",
      "parents": [
        "a2974732ca7614aaf0baf9d6dd3ad893d50ce1c5"
      ],
      "author": {
        "name": "Jorge Eduardo Candelaria",
        "email": "jedu@slimlogic.co.uk",
        "time": "Mon May 16 18:35:37 2011 -0500"
      },
      "committer": {
        "name": "Liam Girdwood",
        "email": "lrg@slimlogic.co.uk",
        "time": "Fri May 27 10:49:29 2011 +0100"
      },
      "message": "GPIO: TPS65910: Move driver to drivers/gpio/\n\nThe GPIO driver should reside in drivers/gpio/ for better\norganization.\n\nSigned-off-by: Jorge Eduardo Candelaria \u003cjedu@slimlogic.co.uk\u003e\nAcked-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n"
    },
    {
      "commit": "c01e36dde4632e0a7474fddf0716f1e54f01f13e",
      "tree": "1e0231cb408d30d8c1e7343a40dd6bffd6b4eadb",
      "parents": [
        "327e15af15248563c896c16adad6fc6e04bb5a4d"
      ],
      "author": {
        "name": "Jorge Eduardo Candelaria",
        "email": "jedu@slimlogic.co.uk",
        "time": "Wed May 11 01:43:02 2011 -0500"
      },
      "committer": {
        "name": "Liam Girdwood",
        "email": "lrg@slimlogic.co.uk",
        "time": "Fri May 27 10:49:09 2011 +0100"
      },
      "message": "linux-next: build failure after merge of the voltage tree\n\nOn May 10, 2011, at 9:27 PM, Stephen Rothwell wrote:\n\n\u003e Hi Jorge,\n\u003e\n\u003e On Tue, 10 May 2011 12:30:36 -0500 Jorge Eduardo Candelaria \u003cjedu@slimlogic.co.uk\u003e wrote:\n\u003e\u003e\n\u003e\u003e On May 10, 2011, at 3:38 AM, Liam Girdwood wrote:\n\u003e\u003e\n\u003e\u003e\u003e On Tue, 2011-05-10 at 12:44 +1000, Stephen Rothwell wrote:\n\u003e\u003e\u003e\u003e Hi Liam,\n\u003e\u003e\u003e\u003e\n\u003e\u003e\u003e\u003e After merging the voltage tree, today\u0027s linux-next build (x86_64\n\u003e\u003e\u003e\u003e allmodconfig) failed like this:\n\u003e\u003e\u003e\u003e\n\u003e\u003e\u003e\u003e ERROR: \"tps65910_gpio_init\" [drivers/mfd/tps65910.ko] undefined!\n\u003e\u003e\u003e\u003e ERROR: \"tps65910_irq_init\" [drivers/mfd/tps65910.ko] undefined!\n\u003e\u003e\u003e\u003e ERROR: \"irq_modify_status\" [drivers/mfd/tps65910-irq.ko] undefined!\n\u003e\u003e\u003e\u003e ERROR: \"irq_set_chip_and_handler_name\" [drivers/mfd/tps65910-irq.ko] undefined!\n\u003e\u003e\u003e\u003e ERROR: \"handle_edge_irq\" [drivers/mfd/tps65910-irq.ko] undefined!\n\u003e\u003e\u003e\u003e\n\u003e\u003e\u003e\u003e I have used the voltage tree from next-20110509 for today.\n\u003e\u003e\u003e\n\u003e\u003e\u003e Jorge, could you send a fix for this today.\n\u003e\u003e\n\u003e\u003e The following patch should solve this:\n\u003e\u003e\n\u003e\u003e From: Jorge Eduardo Candelaria \u003cjedu@slimlogic.co.uk\u003e\n\u003e\u003e MFD: Fix TPS65910 build\n\u003e\u003e\n\u003e\u003e Support for tps65910 as a module is not available. The driver can\n\u003e\u003e only be compiled as built-in. OTOH, the regulator driver can still\n\u003e\u003e be built as module without breaking the compilation.\n\u003e\u003e\n\u003e\u003e Signed-off-by: Jorge Eduardo Candelaria \u003cjedu@slimlogic.co.uk\u003e\n\u003e\n\u003e Today (even with the above patch included) I got these errors from the\n\u003e x86_64 allmodconfig build:\n\u003e\n\u003e tps65910.c:(.text+0xf4140): undefined reference to `i2c_master_send\u0027\n\u003e drivers/built-in.o: In function `tps65910_i2c_read\u0027:\n\u003e tps65910.c:(.text+0xf41d2): undefined reference to `i2c_transfer\u0027\n\u003e drivers/built-in.o: In function `tps65910_i2c_init\u0027:\n\u003e tps65910.c:(.init.text+0xcb83): undefined reference to `i2c_register_driver\u0027\n\u003e drivers/built-in.o: In function `tps65910_i2c_exit\u0027:\n\u003e tps65910.c:(.exit.text+0x6e0): undefined reference to `i2c_del_driver\u0027\n\u003e\n\u003e I have used the voltage tree from next-20110509 again today.\n\nFollowing patch should fix the dependency problems. Please review:\n\nFrom: Jorge Eduardo Candelaria \u003cjedu@slimlogic.co.uk\u003e\n[PATCH] MFD: TPS65910: Fix I2C dependency\n\nTPS65910 driver can only be compiled built-in, so the I2C driver\nshould be as well.\n\nSigned-off-by: Jorge Eduardo Candelaria \u003cjedu@slimlogic.co.uk\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n"
    },
    {
      "commit": "aec519b5ec95e2d8b33b7620a2830afc55707e40",
      "tree": "a4c192490d3592e4d6cbf4ac6cc7e97a31a6a0f7",
      "parents": [
        "518fb721de3685c8326e72746151b534a241feda"
      ],
      "author": {
        "name": "Jorge Eduardo Candelaria",
        "email": "jedu@slimlogic.co.uk",
        "time": "Tue May 10 12:30:36 2011 -0500"
      },
      "committer": {
        "name": "Liam Girdwood",
        "email": "lrg@slimlogic.co.uk",
        "time": "Fri May 27 10:49:08 2011 +0100"
      },
      "message": "linux-next: build failure after merge of the voltage tree\n\nOn May 10, 2011, at 3:38 AM, Liam Girdwood wrote:\n\n\u003e On Tue, 2011-05-10 at 12:44 +1000, Stephen Rothwell wrote:\n\u003e\u003e Hi Liam,\n\u003e\u003e\n\u003e\u003e After merging the voltage tree, today\u0027s linux-next build (x86_64\n\u003e\u003e allmodconfig) failed like this:\n\u003e\u003e\n\u003e\u003e ERROR: \"tps65910_gpio_init\" [drivers/mfd/tps65910.ko] undefined!\n\u003e\u003e ERROR: \"tps65910_irq_init\" [drivers/mfd/tps65910.ko] undefined!\n\u003e\u003e ERROR: \"irq_modify_status\" [drivers/mfd/tps65910-irq.ko] undefined!\n\u003e\u003e ERROR: \"irq_set_chip_and_handler_name\" [drivers/mfd/tps65910-irq.ko] undefined!\n\u003e\u003e ERROR: \"handle_edge_irq\" [drivers/mfd/tps65910-irq.ko] undefined!\n\u003e\u003e\n\u003e\u003e I have used the voltage tree from next-20110509 for today.\n\u003e\n\u003e Jorge, could you send a fix for this today.\n\u003e\n\u003e Thanks\n\u003e\n\u003e Liam\n\u003e\n\nThe following patch should solve this:\n\nFrom: Jorge Eduardo Candelaria \u003cjedu@slimlogic.co.uk\u003e\nMFD: Fix TPS65910 build\n\nSupport for tps65910 as a module is not available. The driver can\nonly be compiled as built-in. OTOH, the regulator driver can still\nbe built as module without breaking the compilation.\n\nSigned-off-by: Jorge Eduardo Candelaria \u003cjedu@slimlogic.co.uk\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n"
    },
    {
      "commit": "27c6750ec56fd3b22c670d9333d519a322996eb2",
      "tree": "f3301c461a70dc651ab035b8ccfa04528625b352",
      "parents": [
        "98ea5c218ed150bf7cabb879db4fc2c106b6fa5b"
      ],
      "author": {
        "name": "Graeme Gregory",
        "email": "gg@slimlogic.co.uk",
        "time": "Mon May 02 16:19:46 2011 -0500"
      },
      "committer": {
        "name": "Liam Girdwood",
        "email": "lrg@slimlogic.co.uk",
        "time": "Fri May 27 10:35:22 2011 +0100"
      },
      "message": "MFD: TPS65910: Add new mfd device for TPS65910\n\nThe TPS65910 chip is a power management IC for multimedia and handheld\ndevices. It contains the following components:\n\n- Regulators\n- GPIO controller\n- RTC\n\nThe tps65910 core driver is registered as a platform driver and provides\ncommunication through I2C with the host device for the different\ncomponents.\n\nSigned-off-by: Graeme Gregory \u003cgg@slimlogic.co.uk\u003e\nSigned-off-by: Jorge Eduardo Candelaria \u003cjedu@slimlogic.co.uk\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n"
    },
    {
      "commit": "c013f0a56c56b88ac63c4037f2dfaaf2422fa863",
      "tree": "54d8e003ba72caf0cc9ff4fcf12cea2eb8727ea9",
      "parents": [
        "cbdb53e1f33baf60ded045dc79cd0dd4e9705fa5"
      ],
      "author": {
        "name": "Abhijeet Dharmapurikar",
        "email": "adharmap@codeaurora.org",
        "time": "Tue Apr 05 14:40:53 2011 -0700"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Thu May 26 19:45:28 2011 +0200"
      },
      "message": "mfd: Add pm8xxx irq support\n\nAdd support for the irq controller in Qualcomm 8xxx pmic. The 8xxx\ninterrupt controller provides control for gpio and mpp configured as\ninterrupts in addition to other subdevice interrupts. The interrupt\ncontroller also provides a way to read the real time status of an\ninterrupt. This real time status is the only way one can get the\ninput values of gpio and mpp lines.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "cbdb53e1f33baf60ded045dc79cd0dd4e9705fa5",
      "tree": "6fba90fb0b27968c75437bf5c5df2c43f15ce64b",
      "parents": [
        "1305134e8246fb4e86b93d5b6a21caa0e07a8ecf"
      ],
      "author": {
        "name": "Abhijeet Dharmapurikar",
        "email": "adharmap@codeaurora.org",
        "time": "Tue Apr 05 14:40:52 2011 -0700"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Thu May 26 19:45:27 2011 +0200"
      },
      "message": "mfd: Add Qualcomm PMIC 8921 core driver\n\nAdd support for the Qualcomm PM8921 PMIC chip. The core driver\nwill communicate with the PMIC chip via the MSM SSBI bus.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "1305134e8246fb4e86b93d5b6a21caa0e07a8ecf",
      "tree": "2483b89d0d2079462b1b779cd309cfcb114ef9c5",
      "parents": [
        "37df003c85efd40b20c6d54695d4f03e6e75ebe6"
      ],
      "author": {
        "name": "Axel Lin",
        "email": "axel.lin@gmail.com",
        "time": "Fri Apr 15 20:06:37 2011 +0800"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Thu May 26 19:45:26 2011 +0200"
      },
      "message": "mfd: Group NXP PCF50633* drivers together\n\nPCF50633_ADC and PCF50633_GPIO depends on MFD_PCF50633.\nThus group NXP PCF50633* drivers together.\n\nSigned-off-by: Axel Lin \u003caxel.lin@gmail.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "37df003c85efd40b20c6d54695d4f03e6e75ebe6",
      "tree": "eb311004880653ec0cf5e9ed48d1ecd0cbd1fe6e",
      "parents": [
        "ca972d13382436530896e90591e2793e7a9e7eba"
      ],
      "author": {
        "name": "Axel Lin",
        "email": "axel.lin@gmail.com",
        "time": "Fri Apr 15 20:04:45 2011 +0800"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Thu May 26 19:45:25 2011 +0200"
      },
      "message": "mfd: Group TPSxxxxx power management chips together\n\nGroup TPSxxxxx power management chips together and sort in alphabetical order.\nThis change makes it easier for users to find config options.\n\nSigned-off-by: Axel Lin \u003caxel.lin@gmail.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "8317797ca657081ed81312ea3501f3a3d59d52e9",
      "tree": "d887ba5ed4b364e5203bff3266bdd0278373bb76",
      "parents": [
        "3df57bcf5a6ba74572218a811bd0e311414f2aff"
      ],
      "author": {
        "name": "Linus Walleij",
        "email": "linus.walleij@linaro.org",
        "time": "Tue May 03 18:14:48 2011 +0200"
      },
      "committer": {
        "name": "Linus Walleij",
        "email": "linus.walleij@linaro.org",
        "time": "Tue May 24 22:19:37 2011 +0200"
      },
      "message": "mfd: add DB5500 PRCMU driver\n\nThis adds the DB5500 PRCMU driver. Right now this one is pretty\nrestricted in functionality, exposing a simple interface to send\nI2C messages.\n\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\n"
    },
    {
      "commit": "650c2a2145981696c414be1d540a32447d0e353e",
      "tree": "f05aadb054bffb88fee3056b78310b148ceed9bf",
      "parents": [
        "118718905de6e32c11e09a8f41c7abff6155ba19"
      ],
      "author": {
        "name": "Linus Walleij",
        "email": "linus.walleij@linaro.org",
        "time": "Sun May 15 22:53:56 2011 +0200"
      },
      "committer": {
        "name": "Linus Walleij",
        "email": "linus.walleij@linaro.org",
        "time": "Tue May 24 22:14:31 2011 +0200"
      },
      "message": "mach-ux500: move the DB8500 PRCMU driver to MFD\n\nWe have decided that this function arbiter fits better in the MFD\nsubsystem. Since we need to concatenate the split header files we move\nit basically like this:\n\nmv mach-ux500/prcmu-db8500.c drivers/mfd/db8500-prcmu.c\nmv mach-ux500/include/mach/prcmu-defs.h include/linux/mfd/db8500-prcmu.h\nmv mach-ux500/include/mach/prcmu-regs.h drivers/mfd/db8500-prcmu-regs.h\nmach-ux500/include/mach/prcmu.h \u003e\u003e include/linux/mfd/db8500-prcmu.h\nrm arch/arm/mach-ux500/include/mach/prcmu.h\n\nThen we update different #include statements and Makefile orders etc\nto make the PRCMU driver compile, link and boot in the new place\nwithout really changing any code.\n\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\n"
    },
    {
      "commit": "25985edcedea6396277003854657b5f3cb31a628",
      "tree": "f026e810210a2ee7290caeb737c23cb6472b7c38",
      "parents": [
        "6aba74f2791287ec407e0f92487a725a25908067"
      ],
      "author": {
        "name": "Lucas De Marchi",
        "email": "lucas.demarchi@profusion.mobi",
        "time": "Wed Mar 30 22:57:33 2011 -0300"
      },
      "committer": {
        "name": "Lucas De Marchi",
        "email": "lucas.demarchi@profusion.mobi",
        "time": "Thu Mar 31 11:26:23 2011 -0300"
      },
      "message": "Fix common misspellings\n\nFixes generated by \u0027codespell\u0027 and manually reviewed.\n\nSigned-off-by: Lucas De Marchi \u003clucas.demarchi@profusion.mobi\u003e\n"
    },
    {
      "commit": "6b2a4f7a5b777ea8fcf3bb38a0a33e68a920a9dc",
      "tree": "fcf7d9bddc31974ad046aecd51cc856c68e14cdd",
      "parents": [
        "eefbab599531240adaffa1d23900afbc8b0342bd",
        "022b483596fabb5d1320aa4b76f43a754063f37e"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Mar 29 12:09:30 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Mar 29 12:09:30 2011 -0700"
      },
      "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (26 commits)\n  mmc: SDHI should depend on SUPERH || ARCH_SHMOBILE\n  mmc: tmio_mmc: Move some defines into a shared header\n  mmc: tmio: support aggressive clock gating\n  mmc: tmio: fix power-mode interpretation\n  mmc: tmio: remove work-around for unmasked SDIO interrupts\n  sh: fix SDHI IO address-range\n  ARM: mach-shmobile: fix SDHI IO address-range\n  mmc: tmio: only access registers above 0xff, if available\n  mfd: remove now redundant sh_mobile_sdhi.h header\n  sh: convert boards to use linux/mmc/sh_mobile_sdhi.h\n  ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.h\n  mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver\n  sh: ecovec: use the CONFIG_MMC_TMIO symbols instead of MFD\n  mmc: tmio: split core functionality, DMA and MFD glue\n  mmc: tmio: use PIO for short transfers\n  mmc: tmio-mmc: Improve DMA stability on sh-mobile\n  mmc: fix mmc_app_send_scr() for dma transfer\n  mmc: sdhci-esdhc: enable esdhc on imx53\n  mmc: sdhci-esdhc: use writel/readl as general APIs\n  mmc: sdhci: add the abort CMDTYPE bits definition\n  ...\n"
    },
    {
      "commit": "15b7cf1416c0e3ae6163ade3349d717fe2729952",
      "tree": "1f06ff7b68e41b5550dffd9939e16a2f5be9ec9e",
      "parents": [
        "7e599e6e62759e057e902fcf9a05ba24f6155bcd"
      ],
      "author": {
        "name": "Andres Salomon",
        "email": "dilinger@queued.net",
        "time": "Sun Mar 27 21:26:03 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Mon Mar 28 07:51:42 2011 -0700"
      },
      "message": "MFD: allow cs5535-mfd to build on X86 only\n\nStephen ran into the following build error:\n\n  drivers/mfd/cs5535-mfd.c:30:22: error: asm/olpc.h: No such file or directory\n\nolpc.h exists only on x86 (and in the future, ARM).  Rather than\nwrapping the include in an #ifdef, just change cs5535-mfd to only build\non x86.\n\nReported-by: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\nSigned-off-by: Andres Salomon \u003cdilinger@queued.net\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "fc498fa29c725a0f0fc5ed359db0e3ed33f4ed52",
      "tree": "fe3421220a4ad582d7b8153da6857e568b7ae23b",
      "parents": [
        "8537548645231424b457dd277900054c59096920"
      ],
      "author": {
        "name": "Guenter Roeck",
        "email": "guenter.roeck@ericsson.com",
        "time": "Thu Mar 24 12:12:47 2011 -0700"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Sun Mar 27 00:09:38 2011 +0100"
      },
      "message": "mfd: Select MFD_CORE if TPS6105X driver is configured\n\nThe TPS61050/61052 driver uses MFD core code, yet does not specify the\ndependency in Kconfig. If it is the only MFD driver configured, compilation\nfails with\n\nERROR: \"mfd_add_devices\" [drivers/mfd/tps6105x.ko] undefined!\nERROR: \"mfd_remove_devices\" [drivers/mfd/tps6105x.ko] undefined!\n\nFix the problem by adding \"select MFD_CORE\" to the respective Kconfig entry.\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "42051e8a7bce76ebd3cd201704ee2427120636e1",
      "tree": "f62527fca5ea9d247faffa9bda2539d996b18068",
      "parents": [
        "4fbc5ece430bc2890edc90a112c742844130f943"
      ],
      "author": {
        "name": "Guennadi Liakhovetski",
        "email": "g.liakhovetski@gmx.de",
        "time": "Mon Mar 14 09:52:33 2011 +0100"
      },
      "committer": {
        "name": "Chris Ball",
        "email": "cjb@laptop.org",
        "time": "Fri Mar 25 10:39:23 2011 -0400"
      },
      "message": "mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver\n\nOn sh-mobile platforms the SDHI driver was using the tmio_mmc SD/SDIO\nMFD cell driver. Now that the tmio_mmc driver has been split into a\ncore and a separate MFD glue, we can support SDHI natively without the\nneed to emulate an MFD controller. This also allows to support systems\nwith an on-SoC SDHI controller and a separate MFD with a TMIO core.\n\nSigned-off-by: Guennadi Liakhovetski \u003cg.liakhovetski@gmx.de\u003e\nAcked-by: Paul Mundt \u003clethal@linux-sh.org\u003e\nSigned-off-by: Chris Ball \u003ccjb@laptop.org\u003e\n"
    },
    {
      "commit": "76d21c563569bcea6bc67d65cc2c460cff643058",
      "tree": "4dd2c9846ea7838077099646418978e354df1680",
      "parents": [
        "6e50e9f9f4a8277b4d76de417ca77cf3921bd524",
        "472af2b05bdefcaee7e754e22cbf131110017ad6"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Mar 24 09:50:13 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Mar 24 09:50:13 2011 -0700"
      },
      "message": "Merge branch \u0027v4l_for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6\n\n* \u0027v4l_for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (442 commits)\n  [media] videobuf2-dma-contig: make cookie() return a pointer to dma_addr_t\n  [media] sh_mobile_ceu_camera: Do not call vb2\u0027s mem_ops directly\n  [media] V4L: soc-camera: explicitly require V4L2_BUF_TYPE_VIDEO_CAPTURE\n  [media] v4l: soc-camera: Store negotiated buffer settings\n  [media] rc: interim support for 32-bit NEC-ish scancodes\n  [media] mceusb: topseed 0x0011 needs gen3 init for tx to work\n  [media] lirc_zilog: error out if buffer read bytes !\u003d chunk size\n  [media] lirc: silence some compile warnings\n  [media] hdpvr: use same polling interval as other OS\n  [media] ir-kbd-i2c: pass device code w/key in hauppauge case\n  [media] rc/keymaps: Remove the obsolete rc-rc5-tv keymap\n  [media] remove the old RC_MAP_HAUPPAUGE_NEW RC map\n  [media] rc/keymaps: Rename Hauppauge table as rc-hauppauge\n  [media] rc-rc5-hauppauge-new: Fix Hauppauge Grey mapping\n  [media] rc-rc5-hauppauge-new: Add support for the old Black RC\n  [media] rc-rc5-hauppauge-new: Add the old control to the table\n  [media] rc-winfast: Fix the keycode tables\n  [media] a800: Fix a few wrong IR key assignments\n  [media] opera1: Use multimedia keys instead of an app-specific mapping\n  [media] dw2102: Use multimedia keys instead of an app-specific mapping\n  ...\n\nFix up trivial conflicts (remove/modify and some real conflicts) in:\n\tarch/arm/mach-omap2/devices.c\n\tdrivers/staging/Kconfig\n\tdrivers/staging/Makefile\n\tdrivers/staging/dabusb/dabusb.c\n\tdrivers/staging/dabusb/dabusb.h\n\tdrivers/staging/easycap/easycap_ioctl.c\n\tdrivers/staging/usbvideo/usbvideo.c\n\tdrivers/staging/usbvideo/vicam.c\n"
    },
    {
      "commit": "2edd3b692404efc2d3915175a2ed553e783de763",
      "tree": "c2a6d4632ec08b567c24e345d638e656462c0135",
      "parents": [
        "798a8eee44da56b4f2e000ff81dfb49d09c65b71"
      ],
      "author": {
        "name": "Linus Walleij",
        "email": "linus.walleij@linaro.org",
        "time": "Wed Mar 09 12:02:55 2011 +0000"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Wed Mar 23 10:42:09 2011 +0100"
      },
      "message": "regulator: Add a subdriver for TI TPS6105x regulator portions v2\n\nThis adds a subdriver for the regulator found inside the TPS61050\nand TPS61052 chips.\n\nCc: Samuel Ortiz \u003csamuel.ortiz@intel.com\u003e\nCc: Ola Lilja \u003cola.o.lilja@stericsson.com\u003e\nCc: Jonas Aberg \u003cjonas.aberg@stericsson.com\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "798a8eee44da56b4f2e000ff81dfb49d09c65b71",
      "tree": "5c3e84120a8b20ff076100ada5ec2a3367949e36",
      "parents": [
        "f04ddfcd24bf3c1f987eaf634a84998044e616d3"
      ],
      "author": {
        "name": "Linus Walleij",
        "email": "linus.walleij@linaro.org",
        "time": "Wed Mar 09 13:02:38 2011 +0100"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Wed Mar 23 10:42:09 2011 +0100"
      },
      "message": "mfd: Add a core driver for TI TPS61050/TPS61052 chips v2\n\nThe TPS61050/TPS61052 are boost converters, LED drivers, LED flash\ndrivers and a simple GPIO pin chips.\n\nCc: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\nCc: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nCc: Jonas Aberg \u003cjonas.aberg@stericsson.com\u003e\nCc: Ola Lilja \u003cola.o.lilja@stericsson.com\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "d7e8c01a97429101cb0ca2c09380e683c3814af8",
      "tree": "ca814467bbc59122c3c9c3a59792782362e5f65e",
      "parents": [
        "0ea3e83bd8d198f2a18e0066542f8670b2883890"
      ],
      "author": {
        "name": "Randy Dunlap",
        "email": "randy.dunlap@Oracle.COM",
        "time": "Mon Mar 14 11:28:37 2011 +0100"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Wed Mar 23 10:42:05 2011 +0100"
      },
      "message": "mfd: Fix MAX8997 Kconfig entry typos\n\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "527e7e9a82ec95cdb8f694855004b3d262efd09f",
      "tree": "5c58fb64d9efcf37c712b55c6ce993567483e2e3",
      "parents": [
        "f77289ac25b0c81acbed6f9c17cb14809a04e18b"
      ],
      "author": {
        "name": "MyungJoo Ham",
        "email": "myungjoo.ham@samsung.com",
        "time": "Fri Mar 04 15:50:26 2011 +0900"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Wed Mar 23 10:42:03 2011 +0100"
      },
      "message": "mfd: MAX8997/8966 support\n\nMAX8997/MAX8966 chip is a multi-function device with I2C bussses. The\nchip includes PMIC, RTC, Fuel Gauge, MUIC, Haptic, Flash control, and\nBattery (charging) control.\n\nThis patch is an initial release of a MAX8997/8966 driver that supports\nto enable the chip with its primary I2C bus that connects every device\nmentioned above except for Fuel Gauge, which uses another I2C bus. The\nfuel gauge is not supported by this mfd driver and is supported by a\nseperated driver of MAX17042 Fuel Gauge (yes, the fuel gauge part is\ncompatible with MAX17042).\n\nSigned-off-by: MyungJoo Ham \u003cmyungjoo.ham@samsung.com\u003e\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nReviewed-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "f99c1d4f94f91fd3a20bd2eaa3be9c5e7d2668eb",
      "tree": "317d1434bfdd7f13aa0f4ee73e022eb7c7d5c89a",
      "parents": [
        "bcd2f639629b58fbc702bb8be348a03e75472021"
      ],
      "author": {
        "name": "Keerthy",
        "email": "j-keerthy@ti.com",
        "time": "Tue Mar 01 19:12:26 2011 +0530"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Wed Mar 23 10:42:00 2011 +0100"
      },
      "message": "mfd: Add twl4030 madc driver\n\nIntroducing a driver for MADC on TWL4030 powerIC. MADC stands for monitoring\nADC. This driver monitors the real time conversion of analog signals like\nbattery temperature, battery cuurent etc.\n\nSigned-off-by: Keerthy \u003cj-keerthy@ti.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "dae2db30c114cd0dec59b4130c315c9cce351741",
      "tree": "c5c108d1e7635bf086c1bb0b0ce57def0688cce2",
      "parents": [
        "44bdcb54df2714da18c4a0c6f711a350ab4ed93c"
      ],
      "author": {
        "name": "Arun Murthy",
        "email": "arun.murthy@stericsson.com",
        "time": "Tue Feb 22 10:11:13 2011 +0100"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Wed Mar 23 10:41:48 2011 +0100"
      },
      "message": "mfd: Add new ab8500 GPADC driver\n\nAB8500 GPADC driver used to convert Acc and battery/ac/usb voltage\n\nSigned-off-by: Arun Murthy \u003carun.murthy@stericsson.com\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nAcked-by: Mattias Wallin \u003cmattias.wallin@stericsson.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "94fd5b7401e330498331ea3667d796e74c63d08a",
      "tree": "037c0c0d24d0440994e2ff209b4707d0a1028300",
      "parents": [
        "3822f18d8f1c2cf13ade623b2bba6d4a7a1a3f53"
      ],
      "author": {
        "name": "Matti Aaltonen",
        "email": "matti.j.aaltonen@nokia.com",
        "time": "Tue Mar 01 10:10:35 2011 -0300"
      },
      "committer": {
        "name": "Mauro Carvalho Chehab",
        "email": "mchehab@redhat.com",
        "time": "Mon Mar 21 20:32:39 2011 -0300"
      },
      "message": "[media] MFD: WL1273 FM Radio: MFD driver for the FM radio\n\nThis is the core of the WL1273 FM radio driver, it connects\nthe two child modules. The two child drivers are\ndrivers/media/radio/radio-wl1273.c and sound/soc/codecs/wl1273.c.\n\nThe radio-wl1273 driver implements the V4L2 interface and communicates\nwith the device. The ALSA codec offers digital audio, without it only\nanalog audio is available.\n\nSigned-off-by: Matti J. Aaltonen \u003cmatti.j.aaltonen@nokia.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n"
    },
    {
      "commit": "411f5c7a502769ccc0377c5ba36cb0b283847ba8",
      "tree": "2c3a29671e3f923de48c55f94194849264a7bf53",
      "parents": [
        "6d7ed21d17e640b120b902a314143e5ef4917a70",
        "9ced9f03d12d7539e86b0bff5bc750153c976c34"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Mar 17 19:08:06 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Mar 17 19:08:06 2011 -0700"
      },
      "message": "Merge branch \u0027devel-stable\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm\n\n* \u0027devel-stable\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits)\n  davinci: DM644x EVM: register MUSB device earlier\n  davinci: add spi devices on tnetv107x evm\n  davinci: add ssp config for tnetv107x evm board\n  davinci: add tnetv107x ssp platform device\n  spi: add ti-ssp spi master driver\n  mfd: add driver for sequencer serial port\n  ARM: EXYNOS4: Implement Clock gating for System MMU\n  ARM: EXYNOS4: Enhancement of System MMU driver\n  ARM: EXYNOS4: Add support for gpio interrupts\n  ARM: S5P: Add function to register gpio interrupt bank data\n  ARM: S5P: Cleanup S5P gpio interrupt code\n  ARM: EXYNOS4: Add missing GPYx banks\n  ARM: S3C64XX: Fix section mismatch from cpufreq init\n  ARM: EXYNOS4: Add keypad device to the SMDKV310\n  ARM: EXYNOS4: Update clocks for keypad\n  ARM: EXYNOS4: Update keypad base address\n  ARM: EXYNOS4: Add keypad device helpers\n  ARM: EXYNOS4: Add support for SATA on ARMLEX4210\n  plat-nomadik: make GPIO interrupts work with cpuidle ApSleep\n  mach-u300: define a dummy filter function for coh901318\n  ...\n\nFix up various conflicts in\n - arch/arm/mach-exynos4/cpufreq.c\n - arch/arm/mach-mxs/gpio.c\n - drivers/net/Kconfig\n - drivers/tty/serial/Kconfig\n - drivers/tty/serial/Makefile\n - drivers/usb/gadget/fsl_mxc_udc.c\n - drivers/video/Kconfig\n"
    },
    {
      "commit": "03df0f629483f941f83ee2fbb180a4425e99dd23",
      "tree": "3e7ec2e38067799b5a79ea273057bd5e180c9504",
      "parents": [
        "9a9fb12a4832bdf22751e21df298ef3559643b43"
      ],
      "author": {
        "name": "Cyril Chemparathy",
        "email": "cyril@ti.com",
        "time": "Tue Jan 18 19:21:35 2011 +0000"
      },
      "committer": {
        "name": "Kevin Hilman",
        "email": "khilman@ti.com",
        "time": "Tue Mar 15 08:17:22 2011 -0700"
      },
      "message": "mfd: add driver for sequencer serial port\n\nTI\u0027s sequencer serial port (TI-SSP) is a jack-of-all-trades type of serial port\ndevice.  It has a built-in programmable execution engine that can be programmed\nto operate as almost any serial bus (I2C, SPI, EasyScale, and others).\n\nThis patch adds a driver for this controller device.  The driver does not\nexpose a user-land interface.  Protocol drivers built on top of this layer are\nexpected to remain in-kernel.\n\nSigned-off-by: Cyril Chemparathy \u003ccyril@ti.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nSigned-off-by: Sekhar Nori \u003cnsekhar@ti.com\u003e\nSigned-off-by: Kevin Hilman \u003ckhilman@ti.com\u003e\n"
    },
    {
      "commit": "17cdd29d6e1ab4164c792d78c6f096fbafb94e3f",
      "tree": "46c8d1055f00eb79db0b035a58bbee5382de6c1c",
      "parents": [
        "181b250cf53233a7a7c6d7e1e9df402506712e93"
      ],
      "author": {
        "name": "Keshava Munegowda",
        "email": "keshava_mgowda@ti.com",
        "time": "Tue Mar 01 20:08:17 2011 +0530"
      },
      "committer": {
        "name": "Felipe Balbi",
        "email": "balbi@ti.com",
        "time": "Tue Mar 01 17:02:22 2011 +0200"
      },
      "message": "usb: host: omap: common usb host core driver\n\nenabling and disabling the common clocks for ehci\nand ohci is implemented. usbhs is a common parent\nplatform driver for EHCI and OHCI driver. This driver\nreceives the clock enable and disable requests\nfrom ehci and ohci drivers.The UHH and TLL\ninitialization is also performed.\n\nSigned-off-by: Keshava Munegowda \u003ckeshava_mgowda@ti.com\u003e\nSigned-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n"
    },
    {
      "commit": "6680d940b80dbb0617226c5b76b071a3977feb1c",
      "tree": "d5d745b134f2a5ac1f4bfc05be584573f02d6fab",
      "parents": [
        "1d83864cab272f764beb381bbd3837f91fc0abed"
      ],
      "author": {
        "name": "Sundar Iyer",
        "email": "sundar.iyer@stericsson.com",
        "time": "Fri Dec 24 11:52:08 2010 +0100"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri Jan 14 12:38:14 2011 +0100"
      },
      "message": "mfd/ab8500: remove spi support\n\nSince the Ab8500 v1.0, the SPI support is deprecated on the HW.\n\nSigned-off-by: Sundar Iyer \u003csundar.iyer@stericsson.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "1d83864cab272f764beb381bbd3837f91fc0abed",
      "tree": "29e38b692725f4324f84a4e2b507690a5844babf",
      "parents": [
        "b14375800751da9fcd63ec11d39a86077f214dc2"
      ],
      "author": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Sat Dec 11 13:07:49 2010 +0000"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri Jan 14 12:38:13 2011 +0100"
      },
      "message": "mfd: Remove ARCH_U8500 dependency from AB8500\n\nWhile it is vanishingly unlikely that the device will be deployed on other\narchitectures removing the dependency facilitates build testing when doing\ngeneric work on both the MFD core for the device and the subsystem drivers.\n\nThere appears to be no actual code dependency.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "f71e1afdd588ec60fd799b1e5a6f0b2e6cf9605e",
      "tree": "a165b8f2fda7227eaa1c9a33af5885ab9574cb6a",
      "parents": [
        "e1b88eb0e08335d2f6c00b35b67b4ffc78fd46d6"
      ],
      "author": {
        "name": "Andres Salomon",
        "email": "dilinger@queued.net",
        "time": "Fri Nov 26 11:52:35 2010 +0100"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri Jan 14 12:37:38 2011 +0100"
      },
      "message": "mfd: Add cs5535-mfd driver for AMD Geode\u0027s CS5535/CS5536 support\n\nAdd an MFD driver to handle the ISA device on CS5535 and CS5536\nsouthbridges. This ISA bridge is actually multiple devices: GPIOs,\nMFGPTs, etc.\n\nSigned-off-by: Andres Salomon \u003cdilinger@queued.net\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "9e9bc9736756f25d6c47b4eba0ebf25b20a6f153",
      "tree": "647240f479c5f23910c3e6194d1c35b6ba54d75e",
      "parents": [
        "3c0cb7c31c206aaedb967e44b98442bbeb17a6c4",
        "e3c92215198cb6aa00ad38db2780faa6b72e0a3f"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Jan 06 18:32:12 2011 -0800"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Jan 06 18:32:12 2011 -0800"
      },
      "message": "Merge branch \u0027v4l_for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6\n\n* \u0027v4l_for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (255 commits)\n  [media] radio-aimslab.c: Fix gcc 4.5+ bug\n  [media] cx25821: Fix compilation breakage due to BKL dependency\n  [media] v4l2-compat-ioctl32: fix compile warning\n  [media] zoran: fix compiler warning\n  [media] tda18218: fix compile warning\n  [media] ngene: fix compile warning\n  [media] DVB: IR support for TechnoTrend CT-3650\n  [media] cx23885, cimax2.c: Fix case of two CAM insertion irq\n  [media] ir-nec-decoder: fix repeat key issue\n  [media] staging: se401 depends on USB\n  [media] staging: usbvideo/vicam depends on USB\n  [media] soc_camera: Add the ability to bind regulators to soc_camedra devices\n  [media] V4L2: Add a v4l2-subdev (soc-camera) driver for OmniVision OV2640 sensor\n  [media] v4l: soc-camera: switch to .unlocked_ioctl\n  [media] v4l: ov772x: simplify pointer dereference\n  [media] ov9640: fix OmniVision OV9640 sensor driver\u0027s priv data retrieving\n  [media] ov9640: use macro to request OmniVision OV9640 sensor private data\n  [media] ivtv-i2c: Fix two warnings\n  [media] staging/lirc: Update lirc TODO files\n  [media] cx88: Remove the obsolete i2c_adapter.id field\n  ...\n"
    },
    {
      "commit": "383268a8e282fb549dabe3a33ccafc9434ab6006",
      "tree": "e4f4f03c0a609086f43860da1da4d7051f86bcb6",
      "parents": [
        "00765f16f116b45aa67de306ac923ed4ba262bf9"
      ],
      "author": {
        "name": "Matti Aaltonen",
        "email": "matti.j.aaltonen@nokia.com",
        "time": "Fri Dec 10 11:41:33 2010 -0300"
      },
      "committer": {
        "name": "Mauro Carvalho Chehab",
        "email": "mchehab@redhat.com",
        "time": "Wed Dec 29 08:17:02 2010 -0200"
      },
      "message": "[media] MFD: WL1273 FM Radio: MFD driver for the FM radio\n\nThis is the core of the WL1273 FM radio driver, it connects\nthe two child modules. The two child drivers are\ndrivers/media/radio/radio-wl1273.c and sound/soc/codecs/wl1273.c.\n\nThe radio-wl1273 driver implements the V4L2 interface and communicates\nwith the device. The ALSA codec offers digital audio, without it only\nanalog audio is available.\n\nSigned-off-by: Matti J. Aaltonen \u003cmatti.j.aaltonen@nokia.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n"
    },
    {
      "commit": "f4e8afdc7ab1b5a0962be02a9dd15d29a81f4c53",
      "tree": "8e7ab50489a335c9ab60976aaaeb5ad0d2baab95",
      "parents": [
        "c6eda6c5eeb357ff231121619fb49d2bc0605faf"
      ],
      "author": {
        "name": "Sundar Iyer",
        "email": "sundar.iyer@stericsson.com",
        "time": "Mon Dec 13 09:33:13 2010 +0530"
      },
      "committer": {
        "name": "Linus Walleij",
        "email": "linus.walleij@stericsson.com",
        "time": "Sun Dec 19 19:27:42 2010 +0100"
      },
      "message": "mfd/tc35892: rename tc35892 core driver to tc3589x\n\nRename the tc35892 core/gpio drivers to tc3589x to include\nnew variants in the same mfd core\n\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nSigned-off-by: Sundar Iyer \u003csundar.iyer@stericsson.com\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\n"
    },
    {
      "commit": "2aa13b9e8096ab7f12c67f3a5b9a38b194a30ce9",
      "tree": "648b95fc9019f284e172de9b9241df11fb865738",
      "parents": [
        "e5b486841d572c5ac83c798f82f4f67cbbac5320"
      ],
      "author": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Wed Oct 20 00:00:11 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri Oct 29 00:30:25 2010 +0200"
      },
      "message": "mfd: Add WM831x SPI support\n\nImplement support for controlling WM831x and WM832x devices using SPI.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "e5b486841d572c5ac83c798f82f4f67cbbac5320",
      "tree": "162b0c3f058fb461515a06614711a717d6807bb8",
      "parents": [
        "00969f23dae70f62d7ce3f7abbbfb6d09ef92739"
      ],
      "author": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Tue Oct 19 23:57:56 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri Oct 29 00:30:24 2010 +0200"
      },
      "message": "mfd: Factor out WM831x I2C I/O from the core driver\n\nIn preparation for the addition of SPI support for the WM831x move the I2C\nspecific code into a separate file with a separate Kconfig option so the\nI2C support can be excluded from the build.\n\nAlso update the 1133-EV1 PMIC module support for SMDK6410 to use the new\nsymbol.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "8e00593557c3c5a7bc6f636412a1cadcf4624232",
      "tree": "5d2872ae1cc0f39ebc0e29114864d12acdee292d",
      "parents": [
        "b4e017e332b873133602f47ae8cacfae64ab82c5"
      ],
      "author": {
        "name": "Uwe Kleine-König",
        "email": "u.kleine-koenig@pengutronix.de",
        "time": "Tue Sep 28 16:37:20 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri Oct 29 00:29:57 2010 +0200"
      },
      "message": "mfd: Add mc13892 support to mc13xxx\n\nmc13892 is the companion PMIC for Freescale\u0027s i.MX51.  It\u0027s similar enough\nto mc13782 to support it in a single driver.\n\nThis patch introduces enough compatibility cruft to keep all users of the\nsuperseded mc13783 driver unchanged.\n\nSigned-off-by: Uwe Kleine-König \u003cu.kleine-koenig@pengutronix.de\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "375fc77ba950e388f29d11cb3279ada5e5c1580c",
      "tree": "09269b97938cac25d8c27f4fd94ce5b66bae258d",
      "parents": [
        "5f2545fa156f3d4d327038d7664608e146809a3c"
      ],
      "author": {
        "name": "Daniel Drake",
        "email": "dsd@laptop.org",
        "time": "Thu Sep 30 21:55:41 2010 +0100"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri Oct 29 00:29:49 2010 +0200"
      },
      "message": "mfd: Add VIA VX855 multi-function device support\n\nThis device has GPIO, SPI and I2C capabilities.\n\nThe hardware can be found in the OLPC XO-1.5 laptop.\n\nBased on earlier work by Harald Welte.\n\nSigned-off-by: Daniel Drake \u003cdsd@laptop.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "1819ebcf1dc5ba9a19dab1f51a21af6274bbd829",
      "tree": "52a4840104142243d9c792b9512b91d5e19074d0",
      "parents": [
        "d5a0514e5fdba59e759d42be2f752366d5b6c03f"
      ],
      "author": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Mon Sep 20 00:19:27 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri Oct 29 00:29:30 2010 +0200"
      },
      "message": "mfd: msp430 expects I2C to be built-in\n\nmsp430 being a bool, it will only work with I2C\u003dy\n\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "d5a0514e5fdba59e759d42be2f752366d5b6c03f",
      "tree": "140588dd5bd71fdbcfcd60c035c88057373d5b67",
      "parents": [
        "c26448c48448266480e1b6c371f897167060ceaf"
      ],
      "author": {
        "name": "Arun Murthy",
        "email": "arun.murthy@stericsson.com",
        "time": "Wed Sep 15 13:37:18 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri Oct 29 00:29:29 2010 +0200"
      },
      "message": "mfd: Update kconfig for ab8500 core driver\n\nThis patch add a dependancy for ab8500-core driver so as to depend on\nu8500 platform.\n\nThis patch also fixes the build issues(powerpc_allyesconfig) for the\npatch 03f582a93ecca6e9584b622570022abf08ed03ec (misc: Add ab8500 pwm\ndriver)\n\nSigned-off-by: Arun Murthy \u003carun.murthy@stericsson.com\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "c26448c48448266480e1b6c371f897167060ceaf",
      "tree": "daaaa3b64dfe31d1c429b63dba6b4a27e325d18f",
      "parents": [
        "39368eda96c0a54ea0b3c6066b08e46b37f7905f"
      ],
      "author": {
        "name": "Gary King",
        "email": "gking@nvidia.com",
        "time": "Mon Sep 20 00:18:27 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri Oct 29 00:29:28 2010 +0200"
      },
      "message": "mfd: Add basic tps6586x interrupt support\n\nAdd support for enabling and disabling tps6586x subdevice interrupts\n\nSigned-off-by: Gary King \u003cgking@nvidia.com\u003e\nAcked-by: Mike Rapoport \u003cmike@compulab.co.il\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "39368eda96c0a54ea0b3c6066b08e46b37f7905f",
      "tree": "5fdae9213f8a3dbce2ea78f8176bcac07aced621",
      "parents": [
        "5814fc35e1837e30b82c3d57f41310d4c4c52824"
      ],
      "author": {
        "name": "Mattias Wallin",
        "email": "mattias.wallin@stericsson.com",
        "time": "Wed Sep 15 13:12:03 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri Oct 29 00:29:26 2010 +0200"
      },
      "message": "mfd: AB8500 register access via PRCMU I2C\n\nThis patch adds the choice of accessing the AB8500 registers\nvia prcmu I2C. Access either via SPI or I2C is supported.\n\nSigned-off-by: Mattias Wallin \u003cmattias.wallin@stericsson.com\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "5814fc35e1837e30b82c3d57f41310d4c4c52824",
      "tree": "a1af93694c140cb5bf54aff2a194fc084d12d7fb",
      "parents": [
        "38b340527aa44bb8d1b88ef1e5a4e26b27695c2b"
      ],
      "author": {
        "name": "Mattias Wallin",
        "email": "mattias.wallin@stericsson.com",
        "time": "Mon Sep 13 16:05:04 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri Oct 29 00:29:25 2010 +0200"
      },
      "message": "mfd: AB8500 debugfs\n\nThis patch adds the possibility to read and write registers\nvia the debug_fs. It also adds ranges of registers sorted by bank\nwhich makes it possible to read all defined registers in a bank.\n\nSigned-off-by: Mattias Wallin \u003cmattias.wallin@stericsson.com\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nReviewed-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "47c1697508f2ec9f6b31ce6c825fe1017871dea6",
      "tree": "e22afa146c3232802abf482caa167e0e2444093b",
      "parents": [
        "f4ebcab36088d45a5e8889e9b63d77e01c808076"
      ],
      "author": {
        "name": "Mattias Wallin",
        "email": "mattias.wallin@stericsson.com",
        "time": "Fri Sep 10 17:47:56 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri Oct 29 00:29:19 2010 +0200"
      },
      "message": "mfd: Align ab8500 with the abx500 interface\n\nThis patch makes the ab8500 mixed signal chip expose the same\ninterface for register access as the ab3100, ab3550 and ab5500 chip.\nThe ab8500_read() and ab8500_write() is removed and replaced with\nabx500_get_register_interruptible() and\nabx500_set_register_interruptible().\n\nSigned-off-by: Mattias Wallin \u003cmattias.wallin@stericsson.com\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "2c7e6f5797140b33ec2b967ff28941e1c7eff4b2",
      "tree": "c05033ac7712ab253981dc43ac512577113c91c4",
      "parents": [
        "676e02d7a2ed9bb02994670a07df533a29a99de6"
      ],
      "author": {
        "name": "Joonyoung Shim",
        "email": "jy0922.shim@samsung.com",
        "time": "Fri Sep 10 18:36:39 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri Oct 29 00:29:03 2010 +0200"
      },
      "message": "mfd: Add MAX8998 interrupts support\n\nUse genirq and provide seperated file for interrupts support.\n\nSigned-off-by: Joonyoung Shim \u003cjy0922.shim@samsung.com\u003e\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nReviewed-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "f8539ddcbbbca7b6a06e0c2cdfbd116ba43a2fe0",
      "tree": "fbc128750d423e91aa3b876f45a723959b84f480",
      "parents": [
        "b8e9cf0b28173fc25dae9f3ac44de6fc4e9fc385"
      ],
      "author": {
        "name": "Kyungmin Park",
        "email": "kyungmin.park@samsung.com",
        "time": "Mon Aug 23 13:46:49 2010 +0900"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri Oct 29 00:28:45 2010 +0200"
      },
      "message": "mfd: LP3974 PMIC support\n\nLP3974 PMIC support. It has same functionality as max8998.\n\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "8c96aefbe79becf940d27cd8ad2c5aba48322162",
      "tree": "dc073c93d95ebecfd44e2c404ba137170aeca631",
      "parents": [
        "2524468ee586e7ba25bd5a0551acf1fea7e9a0b3"
      ],
      "author": {
        "name": "Linus Walleij",
        "email": "linus.walleij@stericsson.com",
        "time": "Fri Aug 20 10:27:12 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri Oct 29 00:28:42 2010 +0200"
      },
      "message": "mfd: Switch AB3100 to use MFD cells\n\nThis switches the AB3100 core driver to using MFD cells for\nsubdevices instead of spawning common platform devices.\n\nSigned-off-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "580287628cdd99366b10c9050c4479b387283be8",
      "tree": "754d9fe5d15db31497e45d542e816895d20a7e92",
      "parents": [
        "e83ddb335468cdd9ea6e9767eb30b64d8ff176ce",
        "120be663285f80e3501e36ccbb92e7143585fd93"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Aug 12 10:01:30 2010 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Aug 12 10:01:30 2010 -0700"
      },
      "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (22 commits)\n  regulator: Remove default DEBUG define from TPS6586x\n  regulator: tps6507x - add missing platform_set_drvdata in tps6507x_pmic_probe\n  regulator: tps6586x - add regulator_unregister() in tps6586x_regulator_remove()\n  mfd: max8998 - fix incorrect kfree(i2c) in i2c_driver probe callback handler\n  regulator: lp3971 - remove unnecessary ret value checking in lp3971_i2c_write()\n  regulator: max8660 - fix a memory leak in max8660_remove()\n  regulator: max1586 - fix a memory leak in max1586_pmic_remove()\n  regulator: Default GPIO controlled WM8994 regulators to disabled\n  regulator: lp3971 - remove unnecessary ret value checking in lp3971_i2c_write()\n  max8998: fix off-by-one value range checking\n  regulator: tps6586x: fix millivolt return values and SM2 table\n  regulator: tps6586x: add dependancy on MFD_TPS6585x\n  regulator: add TPS6586X regulator driver\n  regulator: MAX8998: set_voltage bugfix. ramp_up delay and min/max voltage\n  regulator: add support for regulators on the ab8500 MFD\n  ab8500-mfd: add regulator support to ab8500 mfd device\n  tps65023: Allow registering similar TPS65021\n  drivers: regulators: depend on MFD_MAX8998\n  drivers: regulator: add Maxim 8998 driver\n  ISL6271A voltage regulator support.\n  ...\n"
    },
    {
      "commit": "c6c193326384aecfd668c8f271799a44dbc74c1a",
      "tree": "58df734fad40389f64641a6f757d245b6274a93e",
      "parents": [
        "1c888e2e3824a3f7565b4d96ede423cb9a9a28b7"
      ],
      "author": {
        "name": "Mike Rapoport",
        "email": "mike@compulab.co.il",
        "time": "Wed Aug 11 01:11:04 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Thu Aug 12 11:28:12 2010 +0200"
      },
      "message": "mfd: Add TPS6586x driver\n\nAdd mfd core driver for TPS6586x PMICs family.\nThe driver provides I/O access for the sub-device drivers and performs\nregstration of the sub-devices based on the platform requirements.\nIn addition it implements GPIOlib interface for the chip GPIOs.\n\nTODO:\n        - add interrupt support\n        - add platform data for PWM, backlight leds and charger\n\nSigned-off-by: Mike Rapoport \u003cmike@compulab.co.il\u003e\nSigned-off-by: Mike Rapoport \u003cmike.rapoport@gmail.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "31fc03df5df364100a41134783c02490fbd25745",
      "tree": "761c424eebb03314ca98b49e6c3b05e4c9ad8cda",
      "parents": [
        "9accdc1bf239ef20c0fe12ceff2a7532374fd7cd"
      ],
      "author": {
        "name": "Hemanth V",
        "email": "hemanthv@ti.com",
        "time": "Wed Jul 14 12:04:56 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Thu Aug 12 11:27:59 2010 +0200"
      },
      "message": "mfd: Add support for TWL6030 PWM\n\nTWL6030 supports PWM (Pulse Width Modulator) which is used\nto control charging LED. PWM allows for controlling brightness.\nThis patch implements the APIs required by leds-pwm driver.\n\nSigned-off-by: Hemanth V \u003chemanthv@ti.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "91f4debf5e2df904e7fade530bd1a6d182efd72c",
      "tree": "263ca3ab3ca3a52e011c4500f9afc051190ad023",
      "parents": [
        "b12c35e22d102172cd2a69581f939ec9a70a7942"
      ],
      "author": {
        "name": "Lars-Peter Clausen",
        "email": "lars@metafoo.de",
        "time": "Mon Jul 12 03:48:08 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Thu Aug 12 11:27:58 2010 +0200"
      },
      "message": "mfd: Add JZ4740 ADC driver\n\nThis patch adds a MFD driver for the JZ4740 ADC unit. The driver is used to\ndemultiplex IRQs and synchronize access to shared registers between the\nbattery, hwmon and (future) touchscreen driver.\n\nSigned-off-by: Lars-Peter Clausen \u003clars@metafoo.de\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "27e34995e1a863c1e9beba30e51dfe2a083f918d",
      "tree": "e7ad3ee4794a3c2cf7d3922610335a6391c987c8",
      "parents": [
        "d2d272a965baeb3d78f843374bc48f0cbce8ac3d"
      ],
      "author": {
        "name": "Rabin Vincent",
        "email": "rabin.vincent@stericsson.com",
        "time": "Fri Jul 02 16:52:08 2010 +0530"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Thu Aug 12 11:27:24 2010 +0200"
      },
      "message": "mfd: Add STMPE I/O Expander support\n\nAdd support for the STMPE family of I/O Expanders from\nSTMicroelectronics.  These devices include upto 24 gpios and a varying\nselection of blocks, including PWM, keypad, and touchscreen controllers.\nThis patch adds the MFD core.\n\n[l.fu@pengutronix.de: fix stmpe811 enable hook]\n[l.fu@pengutronix.de: add touchscreen platform data]\nAcked-by: Luotao Fu \u003cl.fu@pengutronix.de\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nSigned-off-by: Rabin Vincent \u003crabin.vincent@stericsson.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "15742c8a42c89aa5e63542b0de00b0dc4c5038cf",
      "tree": "a342b299378a82f74ba0d15109ba227265151849",
      "parents": [
        "3cb46ac058f8ce3ed339fc5dcf6faae4329153c9"
      ],
      "author": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Sat Jun 19 02:29:24 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Thu Aug 12 11:27:23 2010 +0200"
      },
      "message": "mfd: More verbose MFD Kconfig entry\n\nFor people to be able to intellingibly decide if they want to enable MFD\ndrivers or not, we have to give them a much better description of what they\nare.\n"
    },
    {
      "commit": "156f252857dfd81f03d77d09e33b5f7d2b113e2b",
      "tree": "1614c00b1996ae5a805d9d27661026796d1403fa",
      "parents": [
        "51bd6943cd760a55f655830b3f7dca8a06b54c73"
      ],
      "author": {
        "name": "Kyungmin Park",
        "email": "kyungmin.park@samsung.com",
        "time": "Wed Jun 16 09:04:16 2010 +0200"
      },
      "committer": {
        "name": "Liam Girdwood",
        "email": "lrg@slimlogic.co.uk",
        "time": "Wed Aug 11 11:38:00 2010 +0100"
      },
      "message": "drivers: regulator: add Maxim 8998 driver\n\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n\nThis patch adds voltage regulator driver for Maxim 8998 chip. This chip\nis used on Samsung Aquila and GONI boards and provides following\nfunctionalities:\n- 4 BUCK voltage converters, 17 LDO power regulators and 5 other power\n  controllers\n- battery charger\n\nThis patch adds basic driver for voltage regulators and MAX 8998 MFD core.\n\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nSigned-off-by: Marek Szyprowski \u003cm.szyprowski@samsung.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n"
    },
    {
      "commit": "62579266cf9caca5b999560be2b5ceee42fc4d4d",
      "tree": "eda6066624c734ef3057a9dc568ebaf978499c1a",
      "parents": [
        "75907a1153b42100b7a5e960bfe47d208d726309"
      ],
      "author": {
        "name": "Rabin Vincent",
        "email": "rabin.vincent@stericsson.com",
        "time": "Wed May 19 11:39:02 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri May 28 01:38:00 2010 +0200"
      },
      "message": "mfd: New AB8500 driver\n\nAdd a new driver to support the AB8500 Power Management chip, replacing\nthe current AB4500.  The new driver replaces the old one, instead of an\nincremental modification, because this is a substantial overhaul\nincluding:\n\n - Split of the driver into -core and -spi portions, to allow another\n   interface layer to be added\n\n - Addition of interrupt support\n\n - Switch to MFD core API for handling subdevices\n\n - Simplification of the APIs to remove a redundant block parameter\n\n - Rename of the APIs and macros from ab4500_* to ab8500_*\n\n - Rename of the files from ab4500* to ab8500*\n\n - Change of the driver name from ab4500 to ab8500\n\nAcked-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nAcked-by: Srinidhi Kasagar \u003csrinidhi.kasagar@stericsson.com\u003e\nSigned-off-by: Rabin Vincent \u003crabin.vincent@stericsson.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "38270644cc2f2c1fdf150dcc8c4b96136eb4e1f7",
      "tree": "8558f7232c40ec5fe5d522bb0d9838b358abcb44",
      "parents": [
        "d162251d1b8860ef489aecb712e5f06c33763ef3"
      ],
      "author": {
        "name": "Randy Dunlap",
        "email": "randy.dunlap@oracle.com",
        "time": "Tue May 11 01:07:34 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri May 28 01:37:47 2010 +0200"
      },
      "message": "mfd: Use menuconfig for quicker config editing\n\nChange MFD \u0027menu\u0027 to \u0027menuconfig\u0027 to facilitate easy (one-click)\ndisabling of all MFD drivers.\n\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "09bcb3f3369e164bf51b3b566b865f2514b23e8c",
      "tree": "782010db7f97607558f662fd39ac81eaa4f09886",
      "parents": [
        "fa661258a27aa74aaf741882053d195291cefb75"
      ],
      "author": {
        "name": "Mattias Wallin",
        "email": "mattias.wallin@stericsson.com",
        "time": "Tue May 11 00:25:29 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri May 28 01:37:46 2010 +0200"
      },
      "message": "mfd: AB3550 core driver\n\nThis adds a core driver for the AB3550 mixed-signal circuit\nfound in the ST-Ericsson U300 platforms. This driver\nis a singleton proxy for all access to the AB3550 sub\nfunctionality drivers which can be added on top of this one:\nRTC, regulators, battery and system power control, vibrator,\nLEDs and an ALSA codec.\n\nSigned-off-by: Mattias Wallin \u003cmattias.wallin@stericsson.com\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "fa661258a27aa74aaf741882053d195291cefb75",
      "tree": "73b6e0c7156088f660de465555ee13226ac78242",
      "parents": [
        "812f9e9d424dde9ccb35975c0281edb6f8543735"
      ],
      "author": {
        "name": "Mattias Wallin",
        "email": "mattias.wallin@stericsson.com",
        "time": "Sat May 01 18:26:20 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri May 28 01:37:45 2010 +0200"
      },
      "message": "mfd: AB3100 register access change to abx500 API\n\nThe interface for the AB3100 is changed to make way for the\nABX500 family of chips: AB3550, AB5500 and future ST-Ericsson\nAnalog Baseband chips. The register access functions are moved\nout to a separate struct abx500_ops. In this way the interface\nis moved from the implementation and the sub functionality drivers\ncan keep their interface intact when chip infrastructure and\ncommunication mechanisms changes. We also define the AB3550\ndevice IDs and the AB3550 platform data struct and convert\nthe catenated 32bit event to an array of 3 x 8bits.\n\nSigned-off-by: Mattias Wallin \u003cmattias.wallin@stericsson.com\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "b4ecd326b789f1029c5d4a5239d9bd12ecac353d",
      "tree": "387b115b1a911c38a70b8d6c40bacb983bc613d5",
      "parents": [
        "68e488d965a9055c63c0eac4ad1e6568b07e8ee1"
      ],
      "author": {
        "name": "Rabin Vincent",
        "email": "rabin.vincent@stericsson.com",
        "time": "Mon May 10 23:39:47 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri May 28 01:37:42 2010 +0200"
      },
      "message": "mfd: Add Toshiba\u0027s TC35892 MFD core\n\nThe TC35892 I/O Expander provides 24 GPIOs, a keypad controller, timers,\nand a rotator wheel interface.  This patch adds the MFD core.\n\nAcked-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nSigned-off-by: Rabin Vincent \u003crabin.vincent@stericsson.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "31dd6a2672e337f5de188df3e5169ee732798236",
      "tree": "d0a12a6622d9a32a107267a4479f6e12a495dbd3",
      "parents": [
        "4ce5ba5ba2dfc8186bf31fe7f2d23ff6b5384124"
      ],
      "author": {
        "name": "Todd Fischer",
        "email": "todd.fischer@ridgerun.com",
        "time": "Thu Apr 08 09:04:55 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri May 28 01:37:38 2010 +0200"
      },
      "message": "mfd: Add TPS6507x support\n\nTPS6507x are multi function (PM, touchscreen) chipsets from TI.\nThis commit also changes the corresponding regulator driver from being\nstandalone to an MFD subdevice.\n\nSigned-off-by: Todd Fischer \u003ctodd.fischer@ridgerun.com\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "bd3581323cc02aefc79a21780a4ca8c578642892",
      "tree": "eccf8b03e14bdd16416fa30205c61c128e7ce3ce",
      "parents": [
        "165bce9783ab307368e56b7c1a168520a3791266"
      ],
      "author": {
        "name": "Ira W. Snyder",
        "email": "iws@ovro.caltech.edu",
        "time": "Wed Apr 07 09:43:00 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri May 28 01:37:32 2010 +0200"
      },
      "message": "mfd: Janz CMOD-IO PCI MODULbus Carrier Board support\n\nThe Janz CMOD-IO PCI MODULbus carrier board is a PCI to MODULbus bridge,\nwhich may host many different types of MODULbus daughterboards, including\nCAN and GPIO controllers.\n\nSigned-off-by: Ira W. Snyder \u003ciws@ovro.caltech.edu\u003e\nReviewed-by: Wolfgang Grandegger \u003cwg@grandegger.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "e090d506c3f1b314059fb77b177cd4193bb81d6e",
      "tree": "65e589046da3de2ada51415ff3d1598c0dc81085",
      "parents": [
        "f322d5f0097333343bfd92b47258ee997c889263"
      ],
      "author": {
        "name": "Florian Fainelli",
        "email": "florian@openwrt.org",
        "time": "Sun Mar 21 01:06:05 2010 +0100"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri May 28 01:37:28 2010 +0200"
      },
      "message": "mfd: Add support for the RDC321x southbridge\n\nThis patch adds a new MFD driver for the RDC321x southbridge. This southbridge\nis always present in the RDC321x System-on-a-Chip and provides access to some\nGPIOs as well as a watchdog. Access to these two functions is done using the\nsouthbridge PCI device configuration space.\n\nSigned-off-by: Florian Fainelli \u003cflorian@openwrt.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "311f3ac76826bfd8ed6213ded91ec947df164def",
      "tree": "c848087c301930bd0104441de82d9c13c97c2f09",
      "parents": [
        "056676dabd9f4c69a6adcad208e9aa2ca7241400"
      ],
      "author": {
        "name": "Guennadi Liakhovetski",
        "email": "g.liakhovetski@gmx.de",
        "time": "Wed May 19 18:34:22 2010 +0000"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Sat May 22 16:51:18 2010 +0900"
      },
      "message": "mmc: add DMA support to tmio_mmc driver, when used on SuperH\n\nSDHI controllers on SuperH, served by the tmio_mmc driver, can use slave DMA\nfor data transfer. This patch adds support for the dmaengine API to the\ntmio_mmc driver.\n\nSigned-off-by: Guennadi Liakhovetski \u003cg.liakhovetski@gmx.de\u003e\nAcked-by: Ian Molton \u003cian@mnementh.co.uk\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "c9fbf7e070bbf9cc7adc1420df87706c62cb04ed",
      "tree": "38770c150750f3f11b59643302312762494b546e",
      "parents": [
        "8c0d8fa26ba5ec1f69e88044c671dab58c51e0e1"
      ],
      "author": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Fri Mar 26 16:49:15 2010 +0000"
      },
      "committer": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Mon Apr 05 19:18:07 2010 +0100"
      },
      "message": "mfd: Add WM8994 interrupt controller support\n\nThe WM8994 has an interrupt controller which supports interrupts for\nboth CODEC and GPIO portions of the chip. Support this using genirq,\nwhile allowing for systems that do not have an interrupt hooked up.\n\nWrapper functions are provided for the IRQ request and free to simplify\nthe code in consumer drivers when handling cases where IRQs are not\nset up.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "74511020dde10252f8b8e648690d99dba721de14",
      "tree": "04fc22bc7dd5d5b8d9294b2e57985b093858bd84",
      "parents": [
        "69266866a5790080d7fe80094b28d670ff8aa765",
        "3cc4e53f86dab635166929bfa47cc68d59b28c26"
      ],
      "author": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Mon Mar 22 17:23:46 2010 +0000"
      },
      "committer": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Mon Mar 22 17:23:46 2010 +0000"
      },
      "message": "Merge branch \u0027for-2.6.34\u0027 into for-2.6.35\n"
    },
    {
      "commit": "ca26308c2223cb424c297a70fb7b6c7530a563ba",
      "tree": "29895f9e1ef49f0161df8887d272d7beaa92bc9e",
      "parents": [
        "d9ad6296ec3b4a55ba25f2c5e4824be487242e1f"
      ],
      "author": {
        "name": "Miguel Aguilar",
        "email": "miguel.aguilar@ridgerun.com",
        "time": "Thu Mar 11 09:32:21 2010 -0600"
      },
      "committer": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Fri Mar 12 11:12:21 2010 +0000"
      },
      "message": "MFD: DaVinci Voice Codec\n\nThis is the MFD driver for the DaVinci Voice codec, it has two clients:\n\n* Voice codec interface\n* Voice codec CQ93VC\n\nSigned-off-by: Miguel Aguilar \u003cmiguel.aguilar@ridgerun.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nAcked-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n"
    },
    {
      "commit": "8d002bdc9f1f9a1220c0d87a7321f0233ace97cd",
      "tree": "48820ea92d6c3c186d0e95dad216dd7b0ad414c2",
      "parents": [
        "a5300dcbbd5d455a1a5978095b8f78af66c540a6"
      ],
      "author": {
        "name": "Geert Uytterhoeven",
        "email": "geert@linux-m68k.org",
        "time": "Tue Dec 15 21:49:57 2009 +0100"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri Mar 12 09:09:00 2010 +0100"
      },
      "message": "mfd: Several MFD drivers should depend on GENERIC_HARDIRQS\n\ncommit 5fb4d38b19d95a5f980f0a10adba798f5b92128c (\"mfd: Move WM831x to\ngeneric IRQ\") didn\u0027t take into account that genirq support depends on\nGENERIC_HARDIRQS.\n\nAdditionally, 2.6.34-rc1 added:\n  - commit 2afa62ea76027b00e472ddb672191e6e15425b43 (\"mfd: Use genirq in\n    88pm860x\").\n  - commit 760e4518788df6762700e6bb9dd8692379f11168 (\"mfd: Convert WM8350 to\n    genirq\").\n  - commit 1f1cf8f98cf6588365efeaab8e7e7758aaa77f6e (\"mfd: Update irq handler\n    in max8925\")\n\nMake all of them depend on GENERIC_HARDIRQS to avoid compile errors on\narchitectures that don\u0027t support genirq yet.\n\nSigned-off-by: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "3d8ca8c0b9fe42d005360e255fbf7a6f8580ef87",
      "tree": "a068a83003dac7c289330ce97455f229003f9353",
      "parents": [
        "3c49e810507c9d0659b8aa61f7f91aecda428ee3"
      ],
      "author": {
        "name": "Magnus Damm",
        "email": "damm@opensource.se",
        "time": "Mon Feb 22 13:40:59 2010 +0900"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Sun Mar 07 22:17:32 2010 +0100"
      },
      "message": "mfd/mmc: SDHI Kconfig update\n\nEnable the sh_mobile_sdhi mfd driver on SH-Mobile ARM\nprocessors. While at it, make CONFIG_TMIO_MMC depend on\nCONFIG_MFD_SH_MOBILE_SDHI.\n\nSigned-off-by: Magnus Damm \u003cdamm@opensource.se\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    }
  ],
  "next": "e82c60ae7d3a7f19c4b9b3e7bd6ea298fa5efe93"
}