)]}'
{
  "log": [
    {
      "commit": "250f6715a4112d6686670c5a62ceb9305da94616",
      "tree": "ee1c9b41ed1fed8174efb312421902f19c877e8c",
      "parents": [
        "11bcb32848ddb5ab28f09f142b625e2ba4d55c4c",
        "313162d0b83836e2f57e51b9b8650fb4b9c396ea"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Sat Mar 24 10:41:37 2012 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Sat Mar 24 10:41:37 2012 -0700"
      },
      "message": "Merge tag \u0027device-for-3.4\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux\n\nPull \u003clinux/device.h\u003e avoidance patches from Paul Gortmaker:\n \"Nearly every subsystem has some kind of header with a proto like:\n\n\tvoid foo(struct device *dev);\n\n  and yet there is no reason for most of these guys to care about the\n  sub fields within the device struct.  This allows us to significantly\n  reduce the scope of headers including headers.  For this instance, a\n  reduction of about 40% is achieved by replacing the include with the\n  simple fact that the device is some kind of a struct.\n\n  Unlike the much larger module.h cleanup, this one is simply two\n  commits.  One to fix the implicit \u003clinux/device.h\u003e users, and then one\n  to delete the device.h includes from the linux/include/ dir wherever\n  possible.\"\n\n* tag \u0027device-for-3.4\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:\n  device.h: audit and cleanup users in main include dir\n  device.h: cleanup users outside of linux/include (C files)\n"
    },
    {
      "commit": "51990e825431089747f8896244b5c17d3a6423f1",
      "tree": "5c1ef975ab55734a45444b629855a51f09775b93",
      "parents": [
        "dcd6c92267155e70a94b3927bce681ce74b80d1f"
      ],
      "author": {
        "name": "Paul Gortmaker",
        "email": "paul.gortmaker@windriver.com",
        "time": "Sun Jan 22 11:23:42 2012 -0500"
      },
      "committer": {
        "name": "Paul Gortmaker",
        "email": "paul.gortmaker@windriver.com",
        "time": "Sun Mar 11 14:27:37 2012 -0400"
      },
      "message": "device.h: cleanup users outside of linux/include (C files)\n\nFor files that are actively using linux/device.h, make sure\nthat they call it out.  This will allow us to clean up some\nof the implicit uses of linux/device.h within include/*\nwithout introducing build regressions.\n\nYes, this was created by \"cheating\" -- i.e. the headers were\ncleaned up, and then the fallout was found and fixed, and then\nthe two commits were reordered.  This ensures we don\u0027t introduce\nbuild regressions into the git history.\n\nSigned-off-by: Paul Gortmaker \u003cpaul.gortmaker@windriver.com\u003e\n"
    },
    {
      "commit": "ac5ff1b358ab6813654fea69e739bf0a66c1b002",
      "tree": "598d1135f18934e20a480062147c21837b0281a8",
      "parents": [
        "d5f39d3862a2f3620db10cc0c3f329f0d6f1f596"
      ],
      "author": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Wed Feb 29 15:37:59 2012 +0000"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Thu Mar 01 01:42:52 2012 +0100"
      },
      "message": "mfd: Correct readability of WM8994 DC servo 4E register\n\nIt should be marked as readable but wasn\u0027t, breaking DC servo operation.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "7ed5849c2861faf9c13f027868f635bd782a50e5",
      "tree": "e95a181de00ee76fac4e574993dea738638b5589",
      "parents": [
        "19f9557174d61fcfe132a6846a83c36437ff014e"
      ],
      "author": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Thu Dec 01 13:55:49 2011 +0000"
      },
      "committer": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Tue Dec 13 00:11:49 2011 +0800"
      },
      "message": "mfd: Mark WM1811 GPIO6 register volatile for later revisions\n\nFor later chip revisions the WM1811 GPIO6 register is always volatile so\nstore the device revision when initialising the driver and then check at\nruntime if we\u0027re running on a newer device.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "346978980a781a5b434c48531cf29cadf5b83999",
      "tree": "c2f80a16e77aaca02dff57fc47bb61bce97f00df",
      "parents": [
        "c3f1386171a100d27d9fb978f474a6a330888af5"
      ],
      "author": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Sat Dec 03 17:10:32 2011 +0000"
      },
      "committer": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Tue Dec 13 00:11:13 2011 +0800"
      },
      "message": "mfd: Initialise WM8994 register cache after reading chip ID registers\n\nThe different devices handled by the WM8994 can be distinguished using\ntheir ID registers so we don\u0027t need to rely on the user having registered\nthe device correctly. Instead do the initial regmap setup with a minimal\nconfiguration only supporting physical I/O and then configure the cache\nonce we have identified the device.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "01ed260f22c429337272bf9d25d393a4efd37d51",
      "tree": "5301b3741f32dd96796187ad566c06aea745e1f6",
      "parents": [
        "4de45284d3927b5068de6ed972b11627a3428427"
      ],
      "author": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Fri Aug 19 18:37:58 2011 +0900"
      },
      "committer": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Tue Dec 13 00:10:15 2011 +0800"
      },
      "message": "mfd: Add wm8994 register access and default information\n\nDescribe the register map to the regmap core so that we can use its\ndiagnostic features and cache support.  This is split out from the patch\nusing it due to the size so that the actual code change is a bit clearer.\n\nAs the various devices are supersets of each other the access maps are\nbuilt up by layering the functions on top of each other, though the\ninterface for specifying the register defaults isn\u0027t currently amenable\nto this.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    }
  ]
}