)]}'
{
  "log": [
    {
      "commit": "53c6bc24fdc8db87109a5760579cbb060fa644cf",
      "tree": "334de2c1dbbb5a8672f35c7cc94f143a3f98cde2",
      "parents": [
        "8d0698428822ce63f7269e7fe81fc4580807b9ac"
      ],
      "author": {
        "name": "David Daney",
        "email": "david.daney@cavium.com",
        "time": "Tue Mar 13 15:58:05 2012 -0700"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@linuxfoundation.org",
        "time": "Tue Mar 13 16:18:36 2012 -0700"
      },
      "message": "usb: Don\u0027t make USB_ARCH_HAS_{XHCI,OHCI,EHCI} depend on USB_SUPPORT.\n\nThe fact that an architecture/board has XHCI, OHCI or EHCI does not\ndepend on the fact that the kernel is configured with USB_SUPPORT.\n\nMake the Kconfig reflect this fact thus avoiding ugly messages like:\n\nwarning: (MIPS_ALCHEMY \u0026\u0026 CAVIUM_OCTEON_REFERENCE_BOARD \u0026\u0026 SOC_AR71XX \u0026\u0026 SOC_AR724X \u0026\u0026 SOC_AR913X \u0026\u0026 SOC_AR933X) selects USB_ARCH_HAS_EHCI which has unmet direct dependencies (USB_SUPPORT)\n\nSigned-off-by: David Daney \u003cdavid.daney@cavium.com\u003e\nCc: Paul Gortmaker \u003cpaul.gortmaker@windriver.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@linuxfoundation.org\u003e\n"
    },
    {
      "commit": "f30cdbcb2e6a7b9cdebe2117a7b623a5b3832a75",
      "tree": "2d19d0f8bc4be83cfb7e8b4af20c4465b5854e3e",
      "parents": [
        "761bbcb74e4611414937ea480ba60bb970648755"
      ],
      "author": {
        "name": "Kelvin Cheung",
        "email": "keguang.zhang@gmail.com",
        "time": "Wed Jan 18 14:41:16 2012 +0800"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Tue Jan 24 15:28:02 2012 -0800"
      },
      "message": "USB: Add EHCI bus glue for Loongson1x SoCs (UPDATED)\n\nUse ehci_setup() in ehci_ls1x_reset().\n\nThe Loongson1x SoCs have a built-in EHCI controller.\nThis patch adds the necessary glue code to make the generic EHCI\ndriver usable for them.\n\nSigned-off-by: Kelvin Cheung \u003ckeguang.zhang@gmail.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "62194244cf871aec73b5854077f1c527416ccd7b",
      "tree": "a12cf9dbb62b8737b5608f1d1a72b589670d34c2",
      "parents": [
        "744f20f28028447cc4486d5ba0a6955840028e37"
      ],
      "author": {
        "name": "Jingoo Han",
        "email": "jg1.han@samsung.com",
        "time": "Fri Dec 23 11:20:54 2011 +0900"
      },
      "committer": {
        "name": "Kukjin Kim",
        "email": "kgene.kim@samsung.com",
        "time": "Fri Dec 23 11:21:56 2011 +0900"
      },
      "message": "USB: Add Samsung Exynos OHCI diver\n\nThis patch adds USB OHCI driver for Samsung EXYNOS SoCs.\n\nSigned-off-by: Jingoo Han \u003cjg1.han@samsung.com\u003e\nAcked-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\nSigned-off-by: Kukjin Kim \u003ckgene.kim@samsung.com\u003e\n"
    },
    {
      "commit": "d6748066ad0e8b2514545998f8367ebb3906f299",
      "tree": "f7a9bfd764a8fb781aeda0ef2249afbab42dddf7",
      "parents": [
        "f04c045f8ce69c22bda9d99eb927276b776135fc",
        "3ba1e543ab4b02640d396098f2f6a199560d5f2d"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Nov 03 13:28:14 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Nov 03 13:28:14 2011 -0700"
      },
      "message": "Merge branch \u0027upstream\u0027 of git://git.linux-mips.org/pub/scm/ralf/upstream-linus\n\n* \u0027upstream\u0027 of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits)\n  MIPS: O32: Provide definition of registers ta0 .. ta3.\n  MIPS: perf: Add Octeon support for hardware perf.\n  MIPS: perf: Add support for 64-bit perf counters.\n  MIPS: perf: Reorganize contents of perf support files.\n  MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c\n  MIPS: Add accessor macros for 64-bit performance counter registers.\n  MIPS: Add probes for more Octeon II CPUs.\n  MIPS: Add more CPU identifiers for Octeon II CPUs.\n  MIPS: XLR, XLS: Add comment for smp setup\n  MIPS: JZ4740: GPIO: Check correct IRQ in demux handler\n  MIPS: JZ4740: GPIO: Simplify IRQ demuxer\n  MIPS: JZ4740: Use generic irq chip\n  MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines\n  MIPS: Alchemy: kill au1xxx.h header\n  MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines\n  MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep\n  MIPS: Alchemy: Redo PCI as platform driver\n  MIPS: Alchemy: more base address cleanup\n  MIPS: Alchemy: rewrite USB platform setup.\n  MIPS: Alchemy: abstract USB block control register access\n  ...\n\nFix up trivial conflicts in:\n\tarch/mips/alchemy/devboards/db1x00/platform.c\n\tdrivers/ide/Kconfig\n\tdrivers/mmc/host/au1xmmc.c\n\tdrivers/video/Kconfig\n\tsound/mips/Kconfig\n"
    },
    {
      "commit": "3766386037827fe7064f57f9aec27b3b5e9417aa",
      "tree": "306a7b1ccf3100469fd711af37963801d8d387c0",
      "parents": [
        "50d5676ebac57c187ac347bae24290f0dc16fdbe"
      ],
      "author": {
        "name": "Manuel Lauss",
        "email": "manuel.lauss@googlemail.com",
        "time": "Fri Aug 12 11:39:45 2011 +0200"
      },
      "committer": {
        "name": "Ralf Baechle",
        "email": "ralf@linux-mips.org",
        "time": "Mon Oct 24 23:34:24 2011 +0100"
      },
      "message": "MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines\n\nNow that no driver any longer depends on the CONFIG_SOC_AU1???  symbols,\nit\u0027s time to get rid of them: Move some of the platform devices to the\nboards which can use them, Rename a few (unused) constants in the header,\nReplace them with MIPS_ALCHEMY in the various Kconfig files.  Finally\ndelete them altogether from the Alchemy Kconfig file.\n\nSigned-off-by: Manuel Lauss \u003cmanuel.lauss@googlemail.com\u003e\nTo: Linux-MIPS \u003clinux-mips@linux-mips.org\u003e\nPatchwork: https://patchwork.linux-mips.org/patch/2707/\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n"
    },
    {
      "commit": "3a6e7119a7779866b432a3abf443243b52eaad3d",
      "tree": "e0afb44d043ef85b1f781eba5e74c6be4fbb13e6",
      "parents": [
        "68aa95d5d4de31c9348c1628ffa85c805305ebc5"
      ],
      "author": {
        "name": "Xu lei",
        "email": "B33228@freescale.com",
        "time": "Fri Oct 14 15:35:10 2011 -0500"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Tue Oct 18 13:51:33 2011 -0700"
      },
      "message": "USB: Fix USB Kconfig dependency problem on 85xx/QoirQ platforms\n\nFor FSL PPC SoCs USB_ARCH_HAS_EHCI currently on depends on PPC_83xx.\nHowever that excludes support for USB on 85xx \u0026 QorIQ devices.  Use\nFSL_SOC insted which will get us 83xx, 85xx, QorIQ, and 5xxx which all\nhave the same USB IP on them.\n\nSigned-off-by: Xulei \u003cB33228@freescale.com\u003e\nSigned-off-by: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "7b7200098011a3f2b66f702b6fe47122cba585a3",
      "tree": "a4a9c603e9a63c16575a5d8ce2029f126c74b8a8",
      "parents": [
        "cd68176abf1098af83c968da274fe908eb7a8a72"
      ],
      "author": {
        "name": "Felipe Balbi",
        "email": "balbi@ti.com",
        "time": "Fri Sep 23 14:19:56 2011 -0700"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Mon Sep 26 15:51:11 2011 -0700"
      },
      "message": "usb/host: introduce USB_ARCH_HAS_XHCI\n\nto make it look like OHCI and EHCI, we introduce\nthat symbol and USB_XHCI_HCD depend on that\ninstead of PCI.\n\n[bigeasy@linutronix.de: wire up USB_ARCH_HAS_HCD]\n\nSigned-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\nSigned-off-by: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\nSigned-off-by: Sarah Sharp \u003csarah.a.sharp@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "e538dfdae85244fd2c4231725d82cc1f1bc4942c",
      "tree": "f8471dd9af305b95557d29a30f427c85418b1621",
      "parents": [
        "c58a76cdd7ab5a945a44fd2d64f6faf40323f95b"
      ],
      "author": {
        "name": "Michal Nazarewicz",
        "email": "mina86@mina86.com",
        "time": "Tue Aug 30 17:11:19 2011 +0200"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Sun Sep 18 01:29:04 2011 -0700"
      },
      "message": "usb: Provide usb_speed_string() function\n\nIn a few places in the kernel, the code prints\na human-readable USB device speed (eg. \"high speed\").\nThis involves a switch statement sometimes wrapped\naround in ({ ... }) block leading to code repetition.\n\nTo mitigate this issue, this commit introduces\nusb_speed_string() function, which returns\na human-readable name of provided speed.\n\nIt also changes a few places switch was used to use\nthis new function.  This changes a bit the way the\nspeed is printed in few instances at the same time\nstandardising it.\n\nSigned-off-by: Michal Nazarewicz \u003cmina86@mina86.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "72246da40f3719af3bfd104a2365b32537c27d83",
      "tree": "db6a4b139c24340e0d5dccab8d9df0b23ab509ef",
      "parents": [
        "500fdf8becb9c8d51970c7ac6a4fa308a5481ebe"
      ],
      "author": {
        "name": "Felipe Balbi",
        "email": "balbi@ti.com",
        "time": "Fri Aug 19 18:10:58 2011 +0300"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Mon Aug 22 16:03:11 2011 -0700"
      },
      "message": "usb: Introduce DesignWare USB3 DRD Driver\n\nThe DesignWare USB3 is a highly\nconfigurable IP Core which can be\ninstantiated as Dual-Role Device (DRD),\nPeripheral Only and Host Only (XHCI)\nconfigurations.\n\nSeveral other parameters can be configured\nlike amount of FIFO space, amount of TX and\nRX endpoints, amount of Host Interrupters,\netc.\n\nThe current driver has been validated with\na virtual model of version 1.73a of that core\nand with an FPGA burned with version 1.83a\nof the DRD core. We have support for PCIe\nbus, which is used on FPGA prototyping, and\nfor the OMAP5, more adaptation (or glue)\nlayers can be easily added and the driver\nis half prepared to handle any possible\nconfiguration the HW engineer has chosen\nconsidering we have the information on\none of the GHWPARAMS registers to do\nruntime checking of certain features.\n\nMore runtime checks can, and should, be added\nin order to make this driver even more flexible\nwith regards to number of endpoints, FIFO sizes,\ntransfer types, etc.\n\nWhile this supports only the device side, for\nnow, we will add support for Host side (xHCI -\nsee the updated series Sebastian has sent [1])\nand OTG after we have it all stabilized.\n\n[1] http://marc.info/?l\u003dlinux-usb\u0026m\u003d131341992020339\u0026w\u003d2\n\nSigned-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "3abd7f68b28dcf6394c71c998376fc7bc92342c4",
      "tree": "31bda72bb574ba7766607ab19f3b2d121fc45808",
      "parents": [
        "7a01f496c5218d98ea4542f74fccb60c23b6185c"
      ],
      "author": {
        "name": "Tanmay Upadhyay",
        "email": "tanmay.upadhyay@einfochips.com",
        "time": "Wed Jul 20 10:00:58 2011 +0530"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Mon Aug 22 15:38:30 2011 -0700"
      },
      "message": "USB: pxa168: Add onchip USB host controller support\n\n- Add EHCI Host controller driver\n- Add wrapper that creates resources for host controller driver\n\nv2 - Call clk_put() after clk_disable() in probe function\n\nSigned-off-by: Tanmay Upadhyay \u003ctanmay.upadhyay@einfochips.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "9be0392989306361d4a63a06a8ee281efbead548",
      "tree": "f2dab853430cbdb78b5a639031ebfa6ea5c2479f",
      "parents": [
        "c430131a02d677aa708f56342c1565edfdacb3c0"
      ],
      "author": {
        "name": "Jan Andersson",
        "email": "jan@gaisler.com",
        "time": "Tue May 03 20:11:58 2011 +0200"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Tue May 03 11:43:48 2011 -0700"
      },
      "message": "USB: EHCI: Add bus glue for GRLIB GRUSBHC controller\n\nThis patch adds support for the GRLIB GRUSBHC EHCI controller from\nAeroflex Gaisler. The controller is typically found on LEON/GRLIB\nSoCs.\n\nTested on GR-LEON4-ITX with with little endian interface and on\nLEON3 system on GR-PCI-XC5V development board for big endian\ncontroller.\n\nSigned-off-by: Jan Andersson \u003cjan@gaisler.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "50ee9339c7347c2b16fa79d43777f72e9f41ef5a",
      "tree": "ce09aa147e5c8bb74c72c46cebfdbffeece6678f",
      "parents": [
        "f0e615c3cb72b42191b558c130409335812621d8",
        "98346f7db014614a4814eb60639f651f8bbc591d"
      ],
      "author": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Tue Apr 19 05:50:26 2011 -0700"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Tue Apr 19 05:50:38 2011 -0700"
      },
      "message": "Merge 2.6.39-rc4 into usb-next\n\nThis is needed to help resolve some xhci issues and other minor\ndifferences.\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "1bcc5aa87f043d34522d783154d08173b435fb46",
      "tree": "dec628a085e998895e71c1a79e0020709f8fe094",
      "parents": [
        "8f1d169f999fea892c3fcbf5a79ae8525a477572"
      ],
      "author": {
        "name": "Joonyoung Shim",
        "email": "jy0922.shim@samsung.com",
        "time": "Fri Apr 08 14:08:50 2011 +0900"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Wed Apr 13 16:50:52 2011 -0700"
      },
      "message": "USB: Add initial S5P EHCI driver\n\nThis patch adds host USB high speed driver for samsung S5P series. This\nis initial driver and we need additional implementation to support some\nfunctions like power management.\n\nSigned-off-by: Jingoo Han \u003cjg1.han@samsung.com\u003e\nSigned-off-by: Joonyoung Shim \u003cjy0922.shim@samsung.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "f1407d5c66240b33d11a7f1a41d55ccf6a9d7647",
      "tree": "90d08090ac44e19e1e3fc0fe0073a34884b5f4c5",
      "parents": [
        "a6360dd37e1a144ed11e6548371bade559a1e4df"
      ],
      "author": {
        "name": "Kuninori Morimoto",
        "email": "kuninori.morimoto.gx@renesas.com",
        "time": "Mon Apr 04 13:44:59 2011 +0900"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Wed Apr 13 16:07:07 2011 -0700"
      },
      "message": "usb: renesas_usbhs: Add Renesas USBHS common code\n\nRenesas SuperH has USBHS IP which can switch Host / Function.\nThis driver is designed so that Host / Function may dynamically change.\nThis patch add usb/renesas_usbhs and common code for SuperH USBHS.\n\nSigned-off-by: Kuninori Morimoto \u003ckuninori.morimoto.gx@renesas.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "0291303d37585ab9056bae9fac1d1e13ae1ce913",
      "tree": "e8182327f99f2a04a662a95b6639c3fd50a750cd",
      "parents": [
        "00cc7a5faf25b3ba5cf30fcffc62249bdd152006"
      ],
      "author": {
        "name": "Michal Simek",
        "email": "monstr@monstr.eu",
        "time": "Mon Apr 04 11:35:05 2011 +0200"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Wed Apr 13 15:43:59 2011 -0700"
      },
      "message": "usb: Fix Kconfig unmet dependencies for Microblaze EHCI\n\nDisable USB_ARCH_HAS_EHCI in arch Kconfig and enable it in usb Kconfig\n\nWarning log:\nwarning: (MICROBLAZE) selects USB_ARCH_HAS_EHCI which has unmet\ndirect dependencies (USB_SUPPORT)\n\nSigned-off-by: Michal Simek \u003cmonstr@monstr.eu\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "82e6923e1862428b755ec306b3dbccf926849314",
      "tree": "e0be095c30c7cbfeff2a2096cf53e9c2f92fed13",
      "parents": [
        "1bae4ce27c9c90344f23c65ea6966c50ffeae2f5"
      ],
      "author": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Fri Jan 21 11:04:45 2011 +0000"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Mon Jan 24 19:05:19 2011 +0000"
      },
      "message": "ARM: lh7a40x: remove unmaintained platform support\n\nlh7a40x has only been receiving updates for updates to generic code.\nThe last involvement from the maintainer according to the git logs was\nin 2006.  As such, it is a maintainence burden with no benefit.\n\nThis gets rid of two defconfigs.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "3e5b08cbbf78bedd316904ab0cf3b27119433ee5",
      "tree": "0365745c1b7441c1868551c024410c829c3accc6",
      "parents": [
        "da40d036fd716f0efb2917076220814b1e927ae1",
        "2af10844eb6ed104f9505bf3a7ba3ceb02264f31"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Jan 07 13:16:28 2011 -0800"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Jan 07 13:16:28 2011 -0800"
      },
      "message": "Merge branch \u0027usb-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6\n\n* \u0027usb-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (144 commits)\n  USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004)\n  USB: serial: ftdi_sio: add support for TIOCSERGETLSR\n  USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport\n  USB: atmel_usba_udc: fix freeing irq in usba_udc_remove()\n  usb: ehci-omap: fix tll channel enable mask\n  usb: ohci-omap3: fix trivial typo\n  USB: gadget: ci13xxx: don\u0027t assume that PAGE_SIZE is 4096\n  USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq\u0027s\n  USB: gadget: update ci13xxx to work with g_ether\n  USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers\n  Revert \"USB: musb: pm: don\u0027t rely fully on clock support\"\n  Revert \"USB: musb: blackfin: pm: make it work\"\n  USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path\n  USB: uas: Ensure we only bind to a UAS interface\n  USB: uas: Rename sense pipe and sense urb to status pipe and status urb\n  USB: uas: Use kzalloc instead of kmalloc\n  USB: uas: Fix up the Sense IU\n  usb: musb: core: kill unneeded #include\u0027s\n  DA8xx: assign name to MUSB IRQ resource\n  usb: gadget: g_ncm added\n  ...\n\nManually fix up trivial conflicts in USB Kconfig changes in:\n\tarch/arm/mach-omap2/Kconfig\n\tarch/sh/Kconfig\n\tdrivers/usb/Kconfig\n\tdrivers/usb/host/ehci-hcd.c\nand annoying chip clock data conflicts in:\n\tarch/arm/mach-omap2/clock3xxx_data.c\n\tarch/arm/mach-omap2/clock44xx_data.c\n"
    },
    {
      "commit": "b0848aea10da186372582f33152efdda43944f26",
      "tree": "681c7e880b3d5cd0d279b3eb72b7123a890dd0e8",
      "parents": [
        "e0c201f339fe7fc38d1b0f6f4755ff627686c7e0"
      ],
      "author": {
        "name": "Pavankumar Kondeti",
        "email": "pkondeti@codeaurora.org",
        "time": "Tue Dec 07 17:53:56 2010 +0530"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Fri Dec 10 14:23:32 2010 -0800"
      },
      "message": "USB: EHCI: Add MSM Host Controller driver\n\nThis patch adds support for EHCI compliant HSUSB Host controller found\non MSM chips.  The root hub has a single port and TT is built into it.\nThis driver depends on OTG driver for PHY initialization, clock\nmanagement and powering up VBUS.\n\nSigned-off-by: Pavankumar Kondeti \u003cpkondeti@codeaurora.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "fe4bfb30fe5788100a70c0ed96ddd8c6186eb9c4",
      "tree": "054d3a37dd62db5f362947c306c12fc3a223571f",
      "parents": [
        "367576b813ed66a000e66ec18f7082bbc84c05d7",
        "e3e9887ee9de36d8e2bef972ad74a42abd7a44c4"
      ],
      "author": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Fri Dec 03 12:12:29 2010 -0800"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Fri Dec 03 12:12:29 2010 -0800"
      },
      "message": "Merge branch \u0027sh/ehci\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6 into work\n\n* \u0027sh/ehci\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6:\n  sh: Convert to USB_ARCH_HAS_OHCI/EHCI selects.\n  usb: ehci-sh: Add missing ehci helpers.\n  usb: ehci-sh: Fix up fault in shutdown path.\n  sh: Add EHCI support for SH7786.\n  usb: ehci-hcd: Add support for SuperH EHCI.\n  usb: ohci-sh: Set IRQ as shared.\n"
    },
    {
      "commit": "e3e9887ee9de36d8e2bef972ad74a42abd7a44c4",
      "tree": "ea0c29e07ca348cb1889dd75606b1123ef05b52e",
      "parents": [
        "6e9d4476063a820764ec063bf683379c38ea1e18"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Dec 01 15:58:58 2010 +0900"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Wed Dec 01 15:58:58 2010 +0900"
      },
      "message": "sh: Convert to USB_ARCH_HAS_OHCI/EHCI selects.\n\nThis switches over to selects for the subtypes to enable OHCI/EHCI\nsupport explicitly rather than littering the usb Kconfig with subtype\ndependencies.\n\nSuggested-by: David Daney \u003cddaney@caviumnetworks.com\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "760efe6910d5743084b586d3d0a3b65aea96fb2f",
      "tree": "7623994cdae2f0fde8dab0bf157b0682a169ec33",
      "parents": [
        "cf36797f35676dafae9d44484391ac7f56b2485a"
      ],
      "author": {
        "name": "Mac Lin",
        "email": "mkl0301@gmail.com",
        "time": "Thu Nov 25 23:58:00 2010 +0800"
      },
      "committer": {
        "name": "Anton Vorontsov",
        "email": "cbouatmailru@gmail.com",
        "time": "Mon Nov 29 18:32:47 2010 +0300"
      },
      "message": "USB: cns3xxx: Add EHCI and OHCI bus glue for cns3xxx SOCs\n\nThe CNS3XXX SOC has include USB EHCI and OHCI compatible controllers.\nThis patch adds the necessary glue logic to allow ehci-hcd and ohci-hcd\ndrivers to work on CNS3XXX\n\nThe EHCI and OHCI controllers share a common clock control and reset\nbit, therefore additional check for the timming of enabling and disabling\nis required. The USB bit of PLL Power Down Control is also shared by OTG,\n24MHzUART clock, Crypto clock, PCIe reference clock, and Clock Scale\nGenerator. Therefore we only ensure it is enabled, while not disabling it.\n\nSigned-off-by: Mac Lin \u003cmkl0301@gmail.com\u003e\nAcked-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nAcked-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\nSigned-off-by: Anton Vorontsov \u003ccbouatmailru@gmail.com\u003e\n"
    },
    {
      "commit": "c8c38de9d8002578599222296b90696745ac0fe3",
      "tree": "11122dfc8a9b8bfeba387d04152c445f53b4c091",
      "parents": [
        "ad78acafeed26f62c9e644f96eecb7c19bd78bb4"
      ],
      "author": {
        "name": "Deepak Sikri",
        "email": "deepak.sikri@st.com",
        "time": "Wed Nov 10 14:33:18 2010 +0530"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Tue Nov 16 13:53:29 2010 -0800"
      },
      "message": "USB host: Adding USB ehci \u0026 ohci support for spear platform\n\nThis patch adds support for ehci and ohci controller in the SPEAr platform.\n\nChanges since V2:\nadded clear_tt_buffer_complete in ehci_spear_hc_driver\n\nSigned-off-by: Deepak Sikri \u003cdeepak.sikri@st.com\u003e\nSigned-off-by: Viresh Kumar \u003cviresh.kumar@st.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "ad78acafeed26f62c9e644f96eecb7c19bd78bb4",
      "tree": "e16909ed4bac8f0e930cdb168cf7909221fba039",
      "parents": [
        "8be8a9d3d16a25645b7869e4544a9d0ec386966a"
      ],
      "author": {
        "name": "Alexey Charkov",
        "email": "alchark@gmail.com",
        "time": "Sun Nov 07 19:28:55 2010 +0300"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Thu Nov 11 06:24:54 2010 -0800"
      },
      "message": "usb: Add support for VIA VT8500 and compatibles in EHCI HCD\n\nVIA and WonderMedia Systems-on-Chip feature a standard EHCI host\ncontroller. This adds necessary glue to use the standard driver\nwith these systems.\n\nSigned-off-by: Alexey Charkov \u003calchark@gmail.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "63c845522263b2da08f70deba760ed0ab51e841d",
      "tree": "6abb296e5f92b385b88d97e167e2ed331c36548d",
      "parents": [
        "9cc563968066b55b067bcff132e4d566b020687d"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Mon Nov 01 17:03:27 2010 -0400"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Mon Nov 01 17:03:27 2010 -0400"
      },
      "message": "usb: ehci-hcd: Add support for SuperH EHCI.\n\nThis adds a trivial stub for supporting EHCI mode of the on-chip\nSH USB host controllers.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "230f7ede6c2f0e403f29e03e0251a470aa9350dd",
      "tree": "6f1c14f10696c12fd4461cc48289b3cb7a342060",
      "parents": [
        "126512e3f274802ca65ebeca8660237f0361ad48"
      ],
      "author": {
        "name": "Anatolij Gustschin",
        "email": "agust@denx.de",
        "time": "Tue Sep 28 20:55:21 2010 +0200"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Fri Oct 22 10:21:58 2010 -0700"
      },
      "message": "USB: add USB EHCI support for MPC5121 SoC\n\nExtends FSL EHCI platform driver glue layer to support\nMPC5121 USB controllers. MPC5121 Rev 2.0 silicon EHCI\nregisters are in big endian format. The appropriate flags\nare set using the information in the platform data structure.\nMPC83xx system interface registers are not available on\nMPC512x, so the access to these registers is isolated in\nMPC512x case. Furthermore the USB controller clocks\nmust be enabled before 512x register accesses which is\ndone by providing platform specific init callback.\n\nThe MPC512x internal USB PHY doesn\u0027t provide supply voltage.\nFor boards using different power switches allow specifying\nDRVVBUS and PWR_FAULT signal polarity of the MPC5121 internal\nPHY using \"fsl,invert-drvvbus\" and \"fsl,invert-pwr-fault\"\nproperties in the device tree USB nodes. Adds documentation\nfor this new device tree bindings.\n\nSigned-off-by: Anatolij Gustschin \u003cagust@denx.de\u003e\nCc: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "2249071b3e03747884d0781ab10b0b9ceac5756b",
      "tree": "ae8731efccd9972992a5861403358c4b81f48c19",
      "parents": [
        "61bfbdb856879cff583fe53b2ab6ae907faedee7"
      ],
      "author": {
        "name": "Lars-Peter Clausen",
        "email": "lars@metafoo.de",
        "time": "Sat Jun 19 04:08:24 2010 +0000"
      },
      "committer": {
        "name": "Ralf Baechle",
        "email": "ralf@linux-mips.org",
        "time": "Thu Aug 05 13:26:19 2010 +0100"
      },
      "message": "USB: Add JZ4740 OHCI support\n\nAdd OHCI glue code for JZ4740 SoCs OHCI module.\n\nSigned-off-by: Lars-Peter Clausen \u003clars@metafoo.de\u003e\nCc: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\nCc: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nCc: linux-usb@vger.kernel.org\nAcked-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\nCc: linux-mips@linux-mips.org\nCc: linux-kernel@vger.kernel.org\nPatchwork: https://patchwork.linux-mips.org/patch/1411/\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n"
    },
    {
      "commit": "42a4f17dc356689075263d7c2bd68456676fa62e",
      "tree": "2c66f5be57722cff7bb39eb0b59c3ec6eb24fff6",
      "parents": [
        "745aef5df1e2277ee9e34d86491084c0d6106338"
      ],
      "author": {
        "name": "Manuel Lauss",
        "email": "manuel.lauss@googlemail.com",
        "time": "Thu Jul 15 21:45:04 2010 +0200"
      },
      "committer": {
        "name": "Ralf Baechle",
        "email": "ralf@linux-mips.org",
        "time": "Thu Aug 05 13:26:06 2010 +0100"
      },
      "message": "MIPS: Alchemy: remove SOC_AU1X00 in favor of MIPS_ALCHEMY\n\nRemove the CONFIG_SOC_AU1X00 Kconfig symbol since its job can also be done\nby MACH_ALCHEMY, now renamed to MIPS_ALCHEMY.\n\nSigned-off-by: Manuel Lauss \u003cmanuel.lauss@googlemail.com\u003e\nTo: Linux-MIPS \u003clinux-mips@linux-mips.org\u003e\nPatchwork: https://patchwork.linux-mips.org/patch/1461/\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n"
    },
    {
      "commit": "7f5b09c15ab989ed5ce4adda0be42c1302df70b7",
      "tree": "9695b00983d1bd077ff91c463abcb136330cf344",
      "parents": [
        "94468080220162f74dc6ce5c3e95e5fec8022902",
        "cedf8a78421943441b9011ce7bcdab55f07d2ea6"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Mar 03 08:48:58 2010 -0800"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Mar 03 08:48:58 2010 -0800"
      },
      "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (220 commits)\n  USB: backlight, appledisplay: fix incomplete registration failure handling\n  USB: pl2303: remove unnecessary reset of usb_device in urbs\n  USB: ftdi_sio: remove obsolete check in unthrottle\n  USB: ftdi_sio: remove unused tx_bytes counter\n  USB: qcaux: driver for auxiliary serial ports on Qualcomm devices\n  USB: pl2303: initial TIOCGSERIAL support\n  USB: option: add Longcheer/Longsung vendor ID\n  USB: fix I2C API usage in ohci-pnx4008.\n  USB: usbmon: mask seconds properly in text API\n  USB: sisusbvga: no unnecessary GFP_ATOMIC\n  USB: storage: onetouch: unnecessary GFP_ATOMIC\n  USB: serial: ftdi: add CONTEC vendor and product id\n  USB: remove references to port-\u003eport.count from the serial drivers\n  USB: tty: Prune uses of tty_request_room in the USB layer\n  USB: tty: Add a function to insert a string of characters with the same flag\n  USB: don\u0027t read past config-\u003einterface[] if usb_control_msg() fails in usb_reset_configuration()\n  USB: tty: kill request_room for USB ACM class\n  USB: tty: sort out the request_room handling for whiteheat\n  USB: storage: fix misplaced parenthesis\n  USB: vstusb.c: removal of driver for Vernier Software \u0026 Technology, Inc., devices and spectrometers\n  ...\n"
    },
    {
      "commit": "efe7daf2231a6beb59f0f641461d19fa62fb83ab",
      "tree": "615fdbfb7928e5deee4f5051bf21246c433a9a26",
      "parents": [
        "bdee2d8432f5af5af953896182a59ec1c5d6fa3a"
      ],
      "author": {
        "name": "Sergei Shtylyov",
        "email": "sshtylyov@ru.mvista.com",
        "time": "Fri Feb 12 23:52:34 2010 +0400"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Tue Mar 02 14:55:06 2010 -0800"
      },
      "message": "USB: OHCI: DA8xx/OMAP-L1x glue layer\n\nTexas Instruments DA8xx/OMAP-L1x OHCI glue layer.\n\nThis OHCI implementation is not without quirks: there\u0027s only one physical port\ndespite the root hub reporting two; the port\u0027s power control and over-current\nstatus bits are not connected to any pins, however, at least on the DA830 EVM\nboard, those signals are connected via GPIO, thus the provision was made for\noverriding the OHCI port power and over-current bits at the board level...\n\nSigned-off-by: Mikhail Cherkashin \u003cmcherkashin@ru.mvista.com\u003e\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "ca0e9485afb8db3abf58235abf6afded2df0db17",
      "tree": "40c0033f6cebeca5e507b9bc895ab47cc9959a4d",
      "parents": [
        "8ca5bfab154487fd75a946e6e95d3519eb74be6a"
      ],
      "author": {
        "name": "Michael Hennerich",
        "email": "michael.hennerich@analog.com",
        "time": "Mon Dec 21 11:16:00 2009 -0500"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Tue Mar 02 14:53:27 2010 -0800"
      },
      "message": "USB: host: SL811: allow the hcd on Blackfin systems\n\nSigned-off-by: Michael Hennerich \u003cmichael.hennerich@analog.com\u003e\nSigned-off-by: Bryan Wu \u003ccooloney@kernel.org\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "a8eb7ca0cbb41c9cd379b8d2a2a5efb503aa65e9",
      "tree": "86901095aeb9e59815a6f95547cf68a9ec0b32e0",
      "parents": [
        "088ef950dc0dd58d2f339e1616c9092fea923f06"
      ],
      "author": {
        "name": "Tony Lindgren",
        "email": "tony@atomide.com",
        "time": "Fri Feb 12 12:26:48 2010 -0800"
      },
      "committer": {
        "name": "Tony Lindgren",
        "email": "tony@atomide.com",
        "time": "Mon Feb 15 09:27:02 2010 -0800"
      },
      "message": "omap3: Replace ARCH_OMAP34XX with ARCH_OMAP3\n\nReplace ARCH_OMAP34XX with ARCH_OMAP3\n\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\n"
    },
    {
      "commit": "796c8c78801ebf1bdebddda06a43276355ff91eb",
      "tree": "f1ba7bf6da49afc2db6d811f11643241d7c048aa",
      "parents": [
        "b375e1169d8ecc9e9db3ecba8147d484b5510833"
      ],
      "author": {
        "name": "Anand Gadiyar",
        "email": "gadiyar@ti.com",
        "time": "Sat Nov 07 01:16:32 2009 +0530"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Fri Dec 11 11:55:20 2009 -0800"
      },
      "message": "USB: ehci: Allow EHCI to be built on OMAP3\n\nusb: ehci: Allow EHCI to be built on OMAP3\n\nOMAP3 chips have a built-in EHCI controller.\nThe recently introduced omap ehci-hcd driver missed\nout on selecting USB_ARCH_HAS_EHCI in Kconfig.\n\nWithout this, the driver cannot be built.\n\nSigned-off-by: Anand Gadiyar \u003cgadiyar@ti.com\u003e\nCc: Vikram Pandita \u003cvikram.pandita@ti.com\u003e\nCc: Ajay Kumar Gupta \u003cajay.gupta@ti.com\u003e\nAcked-by: Felipe Balbi \u003cfelipe.balbi@nokia.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "7e8d5cd93fac4d3720d8f780b350c9421e8997d4",
      "tree": "fe7bf118d39c3c5d85e2270bc2cf34f56ea62455",
      "parents": [
        "ed1db3ada189c9af592c4d2971b22b482b68aafe"
      ],
      "author": {
        "name": "Daniel Mack",
        "email": "daniel@caiaq.de",
        "time": "Wed Oct 28 01:14:59 2009 +0100"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Fri Dec 11 11:55:18 2009 -0800"
      },
      "message": "USB: Add EHCI support for MX27 and MX31 based boards\n\nThe Freescale MX27 and MX31 SoCs have a EHCI controller onboard.\nThe controller is capable of USB on the go. This patch adds\na driver to support all three of them.\n\nUsers have to pass details about serial interface configuration in the\nplatform data.\n\nThe USB OTG core used here is the ARC core, so the driver should\nbe renamed and probably be merged with ehci-fsl.c eventually.\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Daniel Mack \u003cdaniel@caiaq.de\u003e\nCc: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "a6b49cb210f878709bdc0bddc16a853f18790d02",
      "tree": "6147078ef0ce584cb6a8dae7468f060ef5838d12",
      "parents": [
        "2c9871de0ae89a0e2c365ea6e277135fe031d8b4",
        "bfc8125858d777bd5bdba03a091c07cc2e0e17c0"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Sep 24 09:01:44 2009 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Sep 24 09:01:44 2009 -0700"
      },
      "message": "Merge branch \u0027for-linus\u0027 of git://git.monstr.eu/linux-2.6-microblaze\n\n* \u0027for-linus\u0027 of git://git.monstr.eu/linux-2.6-microblaze: (24 commits)\n  microblaze: Disable heartbeat/enable emaclite in defconfigs\n  microblaze: Support simpleImage.dts make target\n  microblaze: Fix _start symbol to physical address\n  microblaze: Use LOAD_OFFSET macro to get correct LMA for all sections\n  microblaze: Create the LOAD_OFFSET macro used to compute VMA vs LMA offsets\n  microblaze: Copy ppc asm-compat.h for clean handling of constants in asm and C\n  microblaze: Actually show KiB rather than pages in \"Freeing initrd memory:\"\n  microblaze: Support ptrace syscall tracing.\n  microblaze: Updated CPU version and FPGA family codes in PVR\n  microblaze: Generate correct signal and siginfo for integer div-by-zero\n  microblaze: Don\u0027t be noisy when userspace causes hardware exceptions\n  microblaze: Remove ipc.h file which points to non-existing asm-generic file\n  microblaze: Clear sticky FSR register after generating exception signals\n  microblaze: Ensure CPU usermode is set on new userspace processes\n  microblaze: Use correct kbuild variable KBUILD_CFLAGS\n  microblaze: Save and restore msr in hw exception\n  microblaze: Add architectural support for USB EHCI host controllers\n  microblaze: Implement include/asm/syscall.h.\n  microblaze: Improve checking mechanism for MSR instruction\n  microblaze: Add checking mechanism for MSR instruction\n  ...\n"
    },
    {
      "commit": "501c9c0802d9fee05efb300de06c8b3d04f17458",
      "tree": "2e4af8a74eb68defe90e359aaea1813aaae27c34",
      "parents": [
        "c0ad7291aae3f76920bdddbc517e20b8d4338ec2"
      ],
      "author": {
        "name": "Nicolas Ferre",
        "email": "nicolas.ferre@atmel.com",
        "time": "Mon Jul 27 14:47:40 2009 -0700"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Wed Sep 23 06:46:30 2009 -0700"
      },
      "message": "USB: at91: Add USB EHCI driver for at91sam9g45 series\n\nAdd host USB High speed driver for at91sam9g45 series.\nThe host driver is an EHCI with its companion OHCI. EHCI is\nhandled by the new ehci-atmel.c whereas the OHCI is always\nhandled by ohci-at91.c.\n\nSigned-off-by: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\nAcked-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\n\n"
    },
    {
      "commit": "586dfc8cafc25cf785332fdfe9530f392e26f30d",
      "tree": "25d20588dffab4d257cedd33bc7e4d583f2fb527",
      "parents": [
        "b95cd7ec3e93bae199e820bd65b21b23e4538acc"
      ],
      "author": {
        "name": "Wan ZongShun",
        "email": "mcuos.com@gmail.com",
        "time": "Sat Jun 13 09:14:28 2009 +0800"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Wed Sep 23 06:46:20 2009 -0700"
      },
      "message": "USB: Add nuvoton Ehci driver for w90p910 platform\n\nAdd ehci support for w90p910 platform.\n\nSigned-off-by: Wan ZongShun \u003cmcuos.com@gmail.com\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "afc26cb39e1e74c87a1b5eb013ead2590b91489c",
      "tree": "4883ec8c0bb9b2b96c2894b573f8336e3c4396d4",
      "parents": [
        "d5b37092aae1edaa638b156b16d09854ad6a1ec0"
      ],
      "author": {
        "name": "Julie Zhu",
        "email": "julie.zhu@xilinx.com",
        "time": "Mon Jul 27 11:45:32 2009 -0600"
      },
      "committer": {
        "name": "Michal Simek",
        "email": "monstr@monstr.eu",
        "time": "Tue Sep 22 08:50:14 2009 +0200"
      },
      "message": "microblaze: Add architectural support for USB EHCI host controllers\n\nAdd architectural support for USB EHCI host controllers. It has been tested\nusing the USB EHCI host controller from Xilinx Inc., using both High Speed\ndevices and Full Speed devices.\n\nSigned-off-by: Julie Zhu \u003cjulie.zhu@xilinx.com\u003e\nSigned-off-by: Michal Simek \u003cmonstr@monstr.eu\u003e\n"
    },
    {
      "commit": "a853a3d4eb2edb066248a39f0634f6f5858816a0",
      "tree": "eeba17105c89d532335a4577cec912763100beae",
      "parents": [
        "905c02acbd89f427c87a6d0a50fed757f6b3001c"
      ],
      "author": {
        "name": "Clemens Ladisch",
        "email": "clemens@ladisch.de",
        "time": "Fri Apr 24 10:12:18 2009 +0200"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Mon Jun 15 21:44:43 2009 -0700"
      },
      "message": "usb: return device strings in UTF-8\n\nChange the encoding of strings returned by usb_string() from ISO 8859-1\nto UTF-8.\n\nSigned-off-by: Clemens Ladisch \u003cclemens@ladisch.de\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "6fa612b56c575a5235568593eab4240c90608630",
      "tree": "288ff82b2dd6a6c278785ff34e52bc7bf348d284",
      "parents": [
        "873a2e89c5e32a5c72a9ece76fcb871358ae22d2"
      ],
      "author": {
        "name": "Michal Simek",
        "email": "monstr@monstr.eu",
        "time": "Mon May 11 15:49:12 2009 +0200"
      },
      "committer": {
        "name": "Michal Simek",
        "email": "monstr@monstr.eu",
        "time": "Thu May 21 15:56:04 2009 +0200"
      },
      "message": "microblaze: Kconfig: Enable drivers for Microblaze\n\nSigned-off-by: Michal Simek \u003cmonstr@monstr.eu\u003e\n"
    },
    {
      "commit": "4c3f450ba4e4c00df91f98664b58f9a98dc049fd",
      "tree": "383e138887b318d6d653382980bb32af36f32f56",
      "parents": [
        "600fa578a95f65bc1f2a03210d3d418747024b43"
      ],
      "author": {
        "name": "Kuninori Morimoto",
        "email": "morimoto.kuninori@renesas.com",
        "time": "Thu Mar 12 08:40:15 2009 +0000"
      },
      "committer": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Mon Mar 16 19:40:34 2009 +0900"
      },
      "message": "sh: Add OHCI USB support for SH7786\n\nSigned-off-by: Kuninori Morimoto \u003cmorimoto.kuninori@renesas.com\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n"
    },
    {
      "commit": "b8da8677d4f88db066c1cfe34529d970a060de46",
      "tree": "2a3ecc830e655c63dd9fa9dc69959fcdb77a513a",
      "parents": [
        "ea99ecfdc81266e61f4445c1830315a65eb8175a"
      ],
      "author": {
        "name": "David Brownell",
        "email": "dbrownell@users.sourceforge.net",
        "time": "Mon Nov 24 11:53:35 2008 -0800"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Wed Jan 07 10:00:02 2009 -0800"
      },
      "message": "USB: move isp1301_omap to drivers/usb/otg\n\nThis moves the isp1301-omap driver from the drivers/i2c/chips\ndirectory (which will be shrinking) into a new drivers/usb/otg\ndirectory (which will grow, with more drivers and utilities).\n\nNote that OTG infrastructure needs to be initialized before\neither host or peripheral side USB support, and may be needed\nbefore for pure host or pure peripheral configurations.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "a27028349ccbcec9dde9d6dbba9d4017ad9ad5ab",
      "tree": "58d7deaeda91cf854543b8dfcef097097eb856fb",
      "parents": [
        "45432371b448c80622d8069b845625996127caeb",
        "6c6409459a18a825ce12ecb003d5686af61f7a2f"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Oct 23 10:09:50 2008 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Oct 23 10:09:50 2008 -0700"
      },
      "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:\n  USB: don\u0027t rebind drivers after failed resume or reset\n  USB: fix memory leak in cdc-acm\n  USB: Unusual dev for Mio moov 330 gps\n  USB: cdc-wdm: make module autoload work\n  USB: Fix unneeded endpoint check in pxa27x_udc\n  usb/gadget: fix kernel-doc warning\n  USB: Speedtouch: add pre_reset and post_reset routines\n  USB: usbtest.c: length, sglen and vary are unsigned, so cannot be negative\n  USB: support Huawei data card product IDs\n  USB: add ZTE MF626 USB GSM modem entry\n  USB: storage: Avoid I/O errors when issuing SCSI ioctls to JMicron USB/ATA bridge\n  USB: Fix debugfs_create_file\u0027s error checking method for usb/gadget/s3c2410_udc\n  USB: ohci: add support for tmio-ohci cell\n"
    },
    {
      "commit": "78c73414f4f6744e2ea5a07b263a9698aa6f2416",
      "tree": "8125e4ad420d0fc4a86c9319c7f51c168a0cf6a2",
      "parents": [
        "2515ddc6db8eb49a79f0fe5e67ff09ac7c81eab4"
      ],
      "author": {
        "name": "Dmitry Baryshkov",
        "email": "dbaryshkov@gmail.com",
        "time": "Wed Oct 08 16:14:23 2008 +0400"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Wed Oct 22 10:05:27 2008 -0700"
      },
      "message": "USB: ohci: add support for tmio-ohci cell\n\nSome Toshiba Mobile I/O chips have OHCI controller built in.\nE.g. the tc6393xb chip found in several Toshiba e-Series PDAs\nand in Sharp Zaurus SL-6000 PDA. This adds platform glue\nto support OHCI function of the chip.\n\nSigned-off-by: Dmitry Baryshkov \u003cdbaryshkov@gmail.com\u003e\nAcked-by: Ian Molton \u003cspyro@f2s.com\u003e\nCc: Ian Molton \u003cspyro@f2s.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "470cc4150367d369bdc98ee04902b04baa2b2464",
      "tree": "b413a73e550b5c362f328e5e71a8b93d439cc182",
      "parents": [
        "d59db761b8559f07a7161ca3387d6c6949667ede"
      ],
      "author": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Wed Sep 17 16:34:26 2008 +0100"
      },
      "committer": {
        "name": "David Vrabel",
        "email": "dv02@dv02pc01.europe.root.pri",
        "time": "Wed Sep 17 16:54:30 2008 +0100"
      },
      "message": "wusb: add the Wireless USB core (build-system)\n\nAdd the WUSB build system (Kconfig and Kbuild) files.\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\nSigned-off-by: David Vrabel \u003cdavid.vrabel@csr.com\u003e\n"
    },
    {
      "commit": "550a7375fe720924241f0eb76e4a5c1a3eb8c32f",
      "tree": "bf973b43f6248e085557dcc268ad04d6e438d030",
      "parents": [
        "f331e40ee8e4861e1d82310b1af7cf75de7370ac"
      ],
      "author": {
        "name": "Felipe Balbi",
        "email": "felipe.balbi@nokia.com",
        "time": "Thu Jul 24 12:27:36 2008 +0300"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Wed Aug 13 17:33:00 2008 -0700"
      },
      "message": "USB: Add MUSB and TUSB support\n\nThis patch adds support for MUSB and TUSB controllers\nintegrated into omap2430 and davinci. It also adds support\nfor external tusb6010 controller.\n\nCc: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nCc: Tony Lindgren \u003ctony@atomide.com\u003e\nSigned-off-by: Felipe Balbi \u003cfelipe.balbi@nokia.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n\n"
    },
    {
      "commit": "3bea302d6aa61f2371a63e9ad81eaa373fd66441",
      "tree": "21217b4b2a8b2749316e3d69a203ac5a4a638ddb",
      "parents": [
        "59f4ff2ecff4cef36378928cec891785b402e80c"
      ],
      "author": {
        "name": "Simon Arlott",
        "email": "simon@fire.lp0.eu",
        "time": "Mon Jul 21 20:44:50 2008 +0100"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Wed Aug 13 17:32:50 2008 -0700"
      },
      "message": "USB: Move usb/mon/ up to misc options in Kconfig\n\nThis makes \"USB Monitor\" appear under \"Miscellaneous USB options\"\nsection instead of in the middle of device specific drivers in the\n\"USB Imaging devices\" section.\n\nSigned-off-by: Simon Arlott \u003csimon@fire.lp0.eu\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "828d55c58cba6b652fd30e00c3d940cb7c523e3c",
      "tree": "599fafc3e89281e12eeab5c1dbb39c85ec67c81e",
      "parents": [
        "504b55cc8bca420856159833629da8f9f92d5adc"
      ],
      "author": {
        "name": "Yoshihiro Shimoda",
        "email": "shimoda.yoshihiro@renesas.com",
        "time": "Fri Jan 11 22:56:15 2008 +0900"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Fri Feb 01 14:35:03 2008 -0800"
      },
      "message": "USB: add support for SuperH OHCI\n\nadd support for SuperH OHCI.\n\nsupported CPU are:\n - SH7720\n - SH7721\n - SH7763\n\nSigned-off-by: Yoshihiro Shimoda \u003cshimoda.yoshihiro@renesas.com\u003e\nAcked-by: David Brownell \u003cdavid-b@pacbell.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "91bc4d31e81b15aa6e2d075307b8727041f2e2d1",
      "tree": "4c7f706fd749aae4cdf3424c664c6a5420fe6cc3",
      "parents": [
        "18bcbcfe9ca2308ebffb40068b51803da9315d97"
      ],
      "author": {
        "name": "Vladimir Barinov",
        "email": "vbarinov@ru.mvista.com",
        "time": "Sun Dec 30 15:21:11 2007 -0800"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Fri Feb 01 14:35:02 2008 -0800"
      },
      "message": "USB: add ehci-ixp bus glue\n\nEHCI Glue driver for Intel IXP4XX EHCI USB controller\n\nSigned-off-by: Vladimir Barinov \u003cvbarinov@ru.mvista.com\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "e77ec1898f9693a3572bdd03eb5d2256166d5464",
      "tree": "412e59085771daadf9c26b7d5ed7360250b09ef5",
      "parents": [
        "a8bcf4108d6322ef157ae3c224a57beb8870af38"
      ],
      "author": {
        "name": "eric miao",
        "email": "eric.miao@marvell.com",
        "time": "Wed Dec 12 09:07:47 2007 +0800"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Sat Jan 26 15:07:53 2008 +0000"
      },
      "message": "[ARM] USB: update to allow pxa27x ohci driver to support pxa3xx\n\nSigned-off-by: eric miao \u003ceric.miao@marvell.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "a3b53514bd89c77c6aaf80b0ea37249d79c3f3bd",
      "tree": "47b98698f03db396df93f4eb193526db96c3ca9d",
      "parents": [
        "96443218be7f61027c23772d048a1bf549dfb2d7"
      ],
      "author": {
        "name": "Paul Mundt",
        "email": "lethal@linux-sh.org",
        "time": "Tue Aug 07 19:21:09 2007 +0900"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Wed Aug 22 14:27:45 2007 -0700"
      },
      "message": "usb: Enable hcd support on SH unconditionally.\n\nPrevious boards were likely seeing USB_ARCH_HAS_HCD selected by way\nof PCMCIA or PCI, though none of those are required for hcd support\non SH. Enable support unconditionally.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "06bfb7eb1535822a3338ffea9918e22215abed90",
      "tree": "f7fcb2d1ac787b00ab2b0325c33813e594ed56e3",
      "parents": [
        "9ef7ad22965fcd817b20c1332286f02362266534"
      ],
      "author": {
        "name": "Jan Engelhardt",
        "email": "jengelh@computergmbh.de",
        "time": "Sat Aug 18 12:56:21 2007 +0200"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@woody.linux-foundation.org",
        "time": "Sat Aug 18 09:52:50 2007 -0700"
      },
      "message": "Add some help texts to recently-introduced kconfig items\n\nSigned-off-by: Jan Engelhardt \u003cjengelh@gmx.de\u003e\nSigned-off-by: Stefan Richter \u003cstefanr@s5r6.in-berlin.de\u003e (edited MACINTOSH_DRIVERS per Geert Uytterhoeven\u0027s remark)\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "0ab7a252a52943786d6d12ad8032266841d68b8e",
      "tree": "2ba146464e05e3701adbbb04318cfe5bb17ff455",
      "parents": [
        "4ad1366376bfef32ec0ffa12d1faa483d6f330bd"
      ],
      "author": {
        "name": "Al Viro",
        "email": "viro@ftp.linux.org.uk",
        "time": "Tue Jul 17 08:49:35 2007 +0100"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@woody.linux-foundation.org",
        "time": "Tue Jul 17 11:01:07 2007 -0700"
      },
      "message": "no USB on M32R\n\nWon\u0027t build due to lack of dma-mapping.\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "773208946a132fb733ba273ee8562814f828cc28",
      "tree": "bb5c791a87b364d882043d8da5ab93bbb9f3112b",
      "parents": [
        "9374430a52dfae5c013b88f7f030c04a6774d410"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@woody.linux-foundation.org",
        "time": "Thu Jul 12 17:06:50 2007 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@woody.linux-foundation.org",
        "time": "Thu Jul 12 17:06:50 2007 -0700"
      },
      "message": "Revert \"USB: fix gregkh-usb-usb-use-menuconfig-objects\"\n\nThis reverts commit acb11c8b8020f1f1b2545152020675ef32d09a58.\n\nIt was broken.  We most certainly *do* want the default to be the old\nbehaviour (and the common case!), instead of breaking everybodys\nconfiguration and making 99% of all people have to override the default.\n\nWhat were you guys thinking?\n\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "acb11c8b8020f1f1b2545152020675ef32d09a58",
      "tree": "457c0201c4a36d86ac8be2bb8efde5f2d4b7851c",
      "parents": [
        "8d6d5fd05088c023bb8b22a4bd0067c21f9c5f18"
      ],
      "author": {
        "name": "Jan Engelhardt",
        "email": "jengelh@computergmbh.de",
        "time": "Mon Jul 09 12:03:06 2007 -0700"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Thu Jul 12 16:34:40 2007 -0700"
      },
      "message": "USB: fix gregkh-usb-usb-use-menuconfig-objects\n\nGenerally, Jens Axboe was against \u0027default y\u0027, so I\u0027ll have some patches to\nremove it.\n\nCc: Jens Axboe \u003cjens.axboe@oracle.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "648dcfc805ea1308552225e96113dc60e054f2f0",
      "tree": "79cc610012081dc50204afecb07f87a6bc04964f",
      "parents": [
        "ed76cacbea08ebfdb678c8687f98237cb7c67bb6"
      ],
      "author": {
        "name": "David Brownell",
        "email": "david-b@pacbell.net",
        "time": "Thu Jun 07 14:13:26 2007 -0700"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Thu Jul 12 16:34:31 2007 -0700"
      },
      "message": "USB: usb host side can be configured given PCMCIA\n\nPlatforms with PCMCIA support can implement host-side USB with \"sl811_cs\",\nso make sure this menu shows up on platforms with PCMCIA.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "04d06ad0f1fdb499af84ae3d7969e2136a462f38",
      "tree": "55dd93f0ebb5de7009344a0954fa20378f70d083",
      "parents": [
        "e8054854221d9d51e381c64d365404f4c1c30f50"
      ],
      "author": {
        "name": "Jan Engelhardt",
        "email": "jengelh@linux01.gwdg.de",
        "time": "Thu May 10 23:04:13 2007 -0700"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Thu Jul 12 16:29:46 2007 -0700"
      },
      "message": "USB: Use menuconfig objects\n\nMake a \"menuconfig\" out of the Kconfig objects \"menu, ..., endmenu\", so that\nthe user can disable all the options in that menu at once instead of having to\ndisable each option separately.\n\nSigned-off-by: Jan Engelhardt \u003cjengelh@gmx.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n"
    },
    {
      "commit": "e25df1205f37c7bff3ab14fdfc8a5249f3c69c82",
      "tree": "e53c1f17d79a62bb845438d6af6a7693ef5440f3",
      "parents": [
        "eeca7a36a86db8bfc1945dd7f6f0c22a6b66b31d"
      ],
      "author": {
        "name": "Martin Schwidefsky",
        "email": "schwidefsky@de.ibm.com",
        "time": "Thu May 10 15:45:57 2007 +0200"
      },
      "committer": {
        "name": "Martin Schwidefsky",
        "email": "schwidefsky@de.ibm.com",
        "time": "Thu May 10 15:46:07 2007 +0200"
      },
      "message": "[S390] Kconfig: menus with depends on HAS_IOMEM.\n\nAdd \"depends on HAS_IOMEM\" to a number of menus to make them\ndisappear for s390 which does not have I/O memory.\n\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\n"
    },
    {
      "commit": "5b2fc499917e5897a13add780e181b4cef197072",
      "tree": "1a1ba52c0c2a7ce9843875cdd713d75d37c4ea1b",
      "parents": [
        "3cb7396b7b26585b1ab7c1a8ca554ec103da5d37"
      ],
      "author": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Wed May 09 21:31:55 2007 -0400"
      },
      "committer": {
        "name": "Jeff Garzik",
        "email": "jeff@garzik.org",
        "time": "Wed May 09 21:31:55 2007 -0400"
      },
      "message": "Move USB network drivers to drivers/net/usb.\n\nIt is preferable to group drivers by usage (net, scsi, ATA, ...) than\nby bus.  When reviewing drivers, the [PCI|USB|PCMCIA|...] maintainer\nis probably less qualified on networking issues than a networking\nmaintainer.  Also, from a practical standpoint, chips often\nappear on multiple buses, which is why we do not put drivers into\ndrivers/pci/net.\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n"
    },
    {
      "commit": "ba0acb5ee318901646f82c134cca2e4de0c43934",
      "tree": "862d0d2b5d06332dce642571f625431c313d04ea",
      "parents": [
        "b5da20f8f7652e7a9648401a1942b7aac3b9ab9d"
      ],
      "author": {
        "name": "Dmitry Torokhov",
        "email": "dtor@insightbb.com",
        "time": "Mon May 07 17:31:32 2007 -0400"
      },
      "committer": {
        "name": "Dmitry Torokhov",
        "email": "dtor@insightbb.com",
        "time": "Tue May 08 01:41:29 2007 -0400"
      },
      "message": "Input: move USB miscellaneous devices under drivers/input/misc\n\nThis will allow concentrating all input devices in one place\nin {menu|x|q}config.\n\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\nAcked-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "58a0cd7887cd689ae42540dd12b3b3131abfbe6c",
      "tree": "3ede7aef3e67bc9fee868129f8eac18a4d7378e1",
      "parents": [
        "022cbd7376fcdf030fe821636f1c910c45a9356a"
      ],
      "author": {
        "name": "Andrew Victor",
        "email": "andrew@sanpeople.com",
        "time": "Fri Dec 01 14:51:13 2006 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Fri Dec 01 16:56:43 2006 +0000"
      },
      "message": "[ARM] 3963/1: AT91: Update configuration files\n\nA number of configuration file changes.\n\nThese are mainly to replace references to ARCH_AT91RM9200 and\nARCH_AT91SAM9261 with the common/generic ARCH_AT91.  That way we don\u0027t\nneed to mention every specific AT91 processor explicitly.\n\nAlso adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK\nboards.\n\nSigned-off-by: Andrew Victor \u003candrew@sanpeople.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "60bbfc84b6d916f5a10127762d0dcb3f4726450d",
      "tree": "d8ed7d510398056ad40911e67aa656408af75236",
      "parents": [
        "b2a8e097d0f3bbb7ef550103022db92fc3832842"
      ],
      "author": {
        "name": "Vitaly Wool",
        "email": "vwool@ru.mvista.com",
        "time": "Thu Jun 29 18:28:18 2006 +0400"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Wed Sep 27 11:58:48 2006 -0700"
      },
      "message": "USB OHCI controller support for PNX4008\n\ninlined is the patch that adds basic support for USB OHCI controller\nsupport for PNX4008 Philips PNX4008 ARM board. Due to HW design, it\ndepends on I2C driver for PNX4008 which I\u0027ve recetnly posted to LKML and\ni2c at lm-sensors.\n\nSigned-off-by: Vitaly Wool \u003cvitalywool@gmail.com\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n\n"
    },
    {
      "commit": "0365ee0a8f7450c5e79302930d461e58161a96a1",
      "tree": "067ba40e1776b036735e1ac60dfa2a6d27146bc0",
      "parents": [
        "8b2e76687b39213725207b4a4264e11e8c7b86e6"
      ],
      "author": {
        "name": "David Brownell",
        "email": "david-b@pacbell.net",
        "time": "Mon Jun 19 14:27:20 2006 -0700"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Wed Aug 02 16:41:41 2006 -0700"
      },
      "message": "USB: AT91 OHCI updates, mostly power management\n\nOHCI updates for AT91 series processors:\n\n - Get ready for at91sam926x processors (ARMv5tej not ARMv4t)\n\n - Suspend/resume support now behaves properly\n\n - In \"standby\" mode, OHCI can be a source of system wakeup events\n   (remote wakeup, device connect/disconnect, etc)\n\nAnd minor cleanups.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Victor \u003candrew@sanpeople.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n\n"
    },
    {
      "commit": "a5b7474a0364507d168c7ff473e2d82deb676b08",
      "tree": "7a8260457db31257b841700787baf46933503da0",
      "parents": [
        "d14feb5ee4a46218f92b21ed52338b64130a151b"
      ],
      "author": {
        "name": "Lennert Buytenhek",
        "email": "buytenh@wantstofly.org",
        "time": "Fri Jun 23 23:02:01 2006 +0200"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Wed Jul 12 16:03:20 2006 -0700"
      },
      "message": "[PATCH] USB: ohci bits for the cirrus ep93xx\n\nThis patch adds OHCI glue bits for the USB host interface in the\nCirrus ep93xx (arm920t) CPU.\n\nSigned-off-by: Lennert Buytenhek \u003cbuytenh@wantstofly.org\u003e\nAcked-by: David Brownell \u003cdavid-b@pacbell.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "9f6933be665ce3b049c274c99810ac754edabf19",
      "tree": "70a670d030c5d5a4175076724e4720a5b967e2bc",
      "parents": [
        "7fa033b103bc3f5c37f934695473f63adf140dba"
      ],
      "author": {
        "name": "Mauro Carvalho Chehab",
        "email": "mchehab@infradead.org",
        "time": "Sat Mar 25 09:05:39 2006 -0300"
      },
      "committer": {
        "name": "Mauro Carvalho Chehab",
        "email": "mchehab@infradead.org",
        "time": "Sat Mar 25 09:29:04 2006 -0300"
      },
      "message": "V4L/DVB (3599a): Move drivers/usb/media to drivers/media/video\n\nBecause of historic reasons, there are two separate directories with\nV4L stuff. Most drivers are located at driver/media/video. However, some\ncode for USB Webcams were inserted under drivers/usb/media.\n\nThis makes difficult for module authors to know were things should be.\nAlso, makes Kconfig menu confusing for normal users.\n\nThis patch moves all V4L content under drivers/usb/media to\ndrivers/media/video, and fixes Kconfig/Makefile entries.\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n"
    },
    {
      "commit": "39a269c09f854d3d98cbb755b3568175f04efa10",
      "tree": "dcba12509961393e9f2920b23a337af8d6c4aec3",
      "parents": [
        "d0852299381326c5d8eb67771aa98108050e6901"
      ],
      "author": {
        "name": "Andrew Victor",
        "email": "andrew@sanpeople.com",
        "time": "Sun Jan 22 10:32:13 2006 -0800"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Mon Mar 20 14:49:55 2006 -0800"
      },
      "message": "[PATCH] USB: add support for OCHI on AT91rm9200\n\nThis adds support for OHCI on AT91rm9200 based boards.\n\nPossibly of interest here is the way this uses \u003clinux/clk.h\u003e to\ngate clocks on/off during system pm state transitions.  That\u0027s\ntypical for non-PCI systems.  Some can go further; Mini-A host\nside connectors enable ID-pin sensing.\n\nFrom: Andrew Victor \u003candrew@sanpeople.com\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "76fa9a240de4294a097235c9ddd470c21eb3449e",
      "tree": "f29b42b106e5394942c59102b8387f5dd322b6b7",
      "parents": [
        "8cd42e97bf451bbbb2f54dc571366ae5a72faaea"
      ],
      "author": {
        "name": "Jordan Crouse",
        "email": "jordan.crouse@amd.com",
        "time": "Fri Jan 20 14:06:09 2006 -0800"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Mon Mar 20 14:49:55 2006 -0800"
      },
      "message": "[PATCH] USB: EHCI for AU1200\n\nALCHEMY:  Add EHCI support for AU1200\n\nUpdated by removing the OHCI support\n\nSigned-off-by: Jordan Crouse \u003cjordan.crouse@amd.com\u003e\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "80cb9aee01245b38325dd84f1359b14a3f01f10d",
      "tree": "aa261392fa976e86dba2bea43b8afc9a64228b89",
      "parents": [
        "469d02293d494d30dba81895cd3d34b0a3a6d51a"
      ],
      "author": {
        "name": "Randy Vinson",
        "email": "rvinson@mvista.com",
        "time": "Fri Jan 20 13:53:38 2006 -0800"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Mon Mar 20 14:49:55 2006 -0800"
      },
      "message": "[PATCH] USB: EHCI for Freescale 83xx\n\nAdding a Host Mode USB driver for the Freescale 83xx.\n\nThis driver supports both the Dual-Role (DR) controller and the\nMulti-Port-Host (MPH) controller present in the Freescale MPC8349. It has\nbeen tested with the MPC8349CDS reference system. This driver depends on\nplatform support code for setting up the pins on the device package in a\nmanner appropriate for the board in use. Note that this patch requires\nselecting the EHCI controller option under the USB Host menu.\n\nSigned-off-by: Randy Vinson \u003crvinson@mvista.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "3eb0c5f4b539873ca88f8597db6a49e83ddfd7e2",
      "tree": "22b31e5bc049df465670ab03c44da8a4022a9c92",
      "parents": [
        "f29080976d109b6c08e42be8a1888f338785c502"
      ],
      "author": {
        "name": "Ben Dooks",
        "email": "ben-linux-usb@fluff.org",
        "time": "Fri Jul 29 12:18:03 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Fri Jul 29 13:12:53 2005 -0700"
      },
      "message": "[PATCH] USB: add S3C24XX USB Host driver support\n\nUSB (OHCI) Host driver for S3C2410/S3C2440 based systems\n\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
      "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d",
      "parents": [],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n"
    }
  ]
}