)]}' { "log": [ { "commit": "f2e41e910320197d55b52e28d99a07130f2ae738", "tree": "110e2a253c05d01faa01e7eb7a2fdbeef93b31b9", "parents": [ "a25effa4d265eb5028c7d4a92a0ddd9267c3c43d" ], "author": { "name": "Andrew Morton", "email": "akpm@linux-foundation.org", "time": "Thu Aug 19 14:13:31 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Aug 20 09:34:55 2010 -0700" }, "message": "revert \"hwmon: f71882fg: add support for the Fintek F71808E\"\n\nRevert commit 7721fea3d0fd93fb4d000eb737b444369358d6d3 (\"hwmon:\nf71882fg: add support for the Fintek F71808E\").\n\nHans said:\n\n: A second review after I\u0027ve received a data sheet for this device from\n: Fintek has turned up a few bugs.\n:\n: Unfortunately Giel (nor I) have time to fix this in time for the 2.6.36\n: cycle. Therefor I would like to see this patch reverted as not having any\n: support for the hwmon function of this superio chip is better then having\n: unreliable support.\n\nCc: Giel van Schijndel \u003cme@mortis.eu\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nCc: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "4bd2691d6ce37e04a965eede12dc05dd62d3a294", "tree": "e18504f25770242924557e2523afc88fe4c978d0", "parents": [ "1ad107fd7492d3dd54d9622793f947b0afea5202" ], "author": { "name": "Randy Dunlap", "email": "randy.dunlap@oracle.com", "time": "Sat Aug 14 21:09:01 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Aug 14 21:09:01 2010 +0200" }, "message": "hwmon: jc42 depends on I2C\n\njc42 uses i2c interfaces, so it should depend on I2C.\n\ndrivers/hwmon/jc42.c:426: error: implicit declaration of function \u0027i2c_check_functionality\u0027\ndrivers/hwmon/jc42.c:521: error: implicit declaration of function \u0027i2c_smbus_read_word_data\u0027\ndrivers/hwmon/jc42.c:529: error: implicit declaration of function \u0027i2c_smbus_write_word_data\u0027\ndrivers/hwmon/jc42.c:580: error: implicit declaration of function \u0027i2c_add_driver\u0027\ndrivers/hwmon/jc42.c:585: error: implicit declaration of function \u0027i2c_del_driver\u0027\n\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nAcked-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "008e5f3350e0a474baff3ed3eb4f79653a6b6745", "tree": "b2a2b27fd68b6071bbe3f2560df477d39d2ddb24", "parents": [ "9d32df192d2e4db4d59f26a3ea73601bd1a733e5" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Aug 14 21:08:59 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Aug 14 21:08:59 2010 +0200" }, "message": "hwmon: (pc87427) Add temperature monitoring support\n\nAdd support for the 6 temperature monitoring channels of the PC87427.\nNote that the sensors resolution can vary, and I couldn\u0027t find a way\nto figure it out, so we might have to compensate in user-space.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\n" }, { "commit": "328716bc16b7077ea5f6293c7420247c570d6480", "tree": "e96b0cf74988b4b3b05c6408d8640ba61e99f63c", "parents": [ "0d22d5835d4c82d1d03399688267f63334efd526" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Aug 14 21:08:58 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Aug 14 21:08:58 2010 +0200" }, "message": "hwmon: (pc87427) Add support for manual fan speed control\n\nAdd initial support for PWM outputs of the PC87427 Super-I/O chip.\nOnly mode change and manual fan speed control are supported. Automatic\nmode configuration isn\u0027t supported, and won\u0027t be until at least one\nboard is known, which makes uses of the PWM outputs.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\n" }, { "commit": "9df7305b5a8651eb940e98496bc1d4742379c578", "tree": "a57f2f4feca16e98da54c9fc39d6f549ce137d1e", "parents": [ "5a9c2cd881f48d4bec627cccde386f8e3a28bb4a" ], "author": { "name": "Steve Glendinning", "email": "steve.glendinning@smsc.com", "time": "Sat Aug 14 21:08:54 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Aug 14 21:08:54 2010 +0200" }, "message": "hwmon: Add driver for SMSC EMC2103 temperature monitor and fan controller\n\nSMSC\u0027s EMC2103 family of temperature/fan controllers have 1\nonboard and up to 3 external temperature sensors, and allow\nclosed-loop control of one fan. This patch adds support for\nthem.\n\nSigned-off-by: Steve Glendinning \u003csteve.glendinning@smsc.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "7721fea3d0fd93fb4d000eb737b444369358d6d3", "tree": "82584339f492a2d771a67924209871c81e3ec9c7", "parents": [ "6b8e8282611ea35845dcff0cb321a7d735fc3155" ], "author": { "name": "Giel van Schijndel", "email": "me@mortis.eu", "time": "Mon Aug 09 17:21:13 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Aug 09 20:45:10 2010 -0700" }, "message": "hwmon: f71882fg: add support for the Fintek F71808E\n\nAllow device probing to recognise the Fintek F71808E.\n\nSysfs interface:\n * Fan/pwm control is the same as for F71889FG\n * Temperature and voltage sensor handling is largely the same as for\n the F71889FG\n - Has one temperature sensor less (doesn\u0027t have temp3)\n - Misses one voltage sensor (doesn\u0027t have V6, thus in6_input refers to\n what in7_input refers for F71889FG)\n\nFor the purpose of the sysfs interface fxxxx_in_temp_attr[] is split up\nsuch that it can largely be reused.\n\nSigned-off-by: Giel van Schijndel \u003cme@mortis.eu\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nCc: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "f3cffe4d1a20208da9bf2c9cc0a973bf091eb160", "tree": "f79f587b6300f4b7bced1ac7df31df4d99cd27e6", "parents": [ "851b29cb3b196cb66452ec964ab5f66c9c9cd1ed" ], "author": { "name": "Chen Gong", "email": "gong.chen@linux.intel.com", "time": "Mon Aug 09 17:21:10 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Aug 09 20:45:10 2010 -0700" }, "message": "hwmon: coretemp: documentation update and cleanup\n\nUpdate coretemp supported CPU TjMax lists and some cleanup work.\n\nSigned-off-by: Chen Gong \u003cgong.chen@linux.intel.com\u003e\nCc: Rudolf Marek \u003cr.marek@assembler.cz\u003e\nCc: Huaxu Wan \u003chuaxu.wan@intel.com\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "4453d7364d3b1f92475f104d4625abee36a7733d", "tree": "4bd0ffc39d5d0ca38447e62d956cee60fe15ee1f", "parents": [ "920fa1ffce48d36d7e7bc54eb38c58313bc0a667" ], "author": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Mon Aug 09 17:21:08 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Aug 09 20:45:10 2010 -0700" }, "message": "hwmon: add support for JEDEC JC 42.4 compliant temperature sensors\n\n[akpm@linux-foundation.org: coding-style fixes]\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Randy Dunlap \u003crdunlap@xenotime.net\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nCc: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "920fa1ffce48d36d7e7bc54eb38c58313bc0a667", "tree": "ca8105f753fa0e0eae008de6b0d383c2ad1294d0", "parents": [ "cfa3b24c38b58cb6acabe6441b4668e530e957af" ], "author": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Mon Aug 09 17:21:06 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Aug 09 20:45:10 2010 -0700" }, "message": "hwmon: driver for SMM665 Six-Channel Active DC Output Controller/Monitor\n\nThis driver adds support for the monitoring features of the Summit\nMicroelectronics SMM665 Six-Channel Active DC Output Controller/Monitor.\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nAcked-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nCc: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nCc: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "a5e11599da95fbe8425db0cfd01a581d7412d0c9", "tree": "45fccb4b27a1068cec8dc8283260893b60ca46d2", "parents": [ "0f477dd0851bdcee82923da66a7fc4a44cb1bc3d", "a3159864f2978bf2ace9cc787d73d315c98bbf9a" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Aug 06 10:02:58 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Aug 06 10:02:58 2010 -0700" }, "message": "Merge branch \u0027x86-hwmon-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027x86-hwmon-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n x86, hwmon: Package Level Thermal/Power: pkgtemp documentation\n x86, hwmon: Package Level Thermal/Power: power limit\n x86, hwmon: Package Level Thermal/Power: thermal throttling handler\n x86, hwmon: Package Level Thermal/Power: pkgtemp hwmon driver\n" }, { "commit": "7f983ba93d449972d5f372f12c6ad32d86ef30b4", "tree": "ea152a93fd73526209dbf17e31d11d28b581e17f", "parents": [ "2249071b3e03747884d0781ab10b0b9ceac5756b" ], "author": { "name": "Lars-Peter Clausen", "email": "lars@metafoo.de", "time": "Sat Jun 19 18:32:58 2010 +0000" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Aug 05 13:26:19 2010 +0100" }, "message": "HWMON: Add JZ4740 ADC driver\n\nAdd support for reading the ADCIN pin of the ADC unit on JZ4740 SoCs.\n\nSigned-off-by: Lars-Peter Clausen \u003clars@metafoo.de\u003e\nCc: lm-sensors@lm-sensors.org\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: linux-mips@linux-mips.org\nCc: linux-kernel@vger.kernel.org\nPatchwork: https://patchwork.linux-mips.org/patch/1425/\nSigned-off-by: Axel Lin \u003caxel.lin@gmail.com\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "cb84b19474384c572ba3aa2345815e555112ebf5", "tree": "ee703b0fc3ed0ff8908b5e9aab63853195c8b845", "parents": [ "9792db6174d9927700ed288e6d74b9391bf785d1" ], "author": { "name": "Fenghua Yu", "email": "fenghua.yu@intel.com", "time": "Thu Jul 29 17:13:43 2010 -0700" }, "committer": { "name": "H. Peter Anvin", "email": "hpa@linux.intel.com", "time": "Tue Aug 03 15:58:07 2010 -0700" }, "message": "x86, hwmon: Package Level Thermal/Power: pkgtemp hwmon driver\n\nThis patch adds a hwmon driver for package level thermal control. The driver\ndumps package level thermal information through sysfs interface so that upper\nlevel application (e.g. lm_sensor) can retrive the information.\n\nInstead of having the package level hwmon code in coretemp, I write a seperate\ndriver pkgtemp because:\n\nFirst, package level thermal sensors include not only sensors for each core,\nbut also sensors for uncore, memory controller or other components in the\npackage. Logically it will be clear to have a seperate hwmon driver for package\nlevel hwmon to monitor wider range of sensors in a package. Merging package\nthermal driver into core thermal driver doesn\u0027t make sense and may mislead.\n\nSecondly, merging the two drivers together may cause coding mess. It\u0027s easier\nto include various package level sensors info if more sensor information is\nimplemented. Coretemp code needs to consider a lot of legacy machine cases.\nPkgtemp code only considers platform starting from Sandy Bridge.\n\nOn a 1Sx4Cx2T Sandy Bridge platform, lm-sensors dumps the pkgtemp and coretemp:\n\npkgtemp-isa-0000\nAdapter: ISA adapter\nphysical id 0: +33.0°C (high \u003d +79.0°C, crit \u003d +99.0°C)\n\ncoretemp-isa-0000\nAdapter: ISA adapter\nCore 0: +32.0°C (high \u003d +79.0°C, crit \u003d +99.0°C)\n\ncoretemp-isa-0001\nAdapter: ISA adapter\nCore 1: +32.0°C (high \u003d +79.0°C, crit \u003d +99.0°C)\n\ncoretemp-isa-0002\nAdapter: ISA adapter\nCore 2: +32.0°C (high \u003d +79.0°C, crit \u003d +99.0°C)\n\ncoretemp-isa-0003\nAdapter: ISA adapter\nCore 3: +32.0°C (high \u003d +79.0°C, crit \u003d +99.0°C)\n\n[ hpa: folded v3 patch removing improper global variable \"SHOW\" ]\n\nSigned-off-by: Fenghua Yu \u003cfenghua.yu@intel.com\u003e\nLKML-Reference: \u003c1280448826-12004-3-git-send-email-fenghua.yu@intel.com\u003e\nReviewed-by: Len Brown \u003clen.brown@intel.com\u003e\nSigned-off-by: H. Peter Anvin \u003chpa@linux.intel.com\u003e\n" }, { "commit": "6d034059eef080a0cdda92b45baa18cb00a19835", "tree": "2c827193adf12b927797343f2a0f99129b8ceda3", "parents": [ "df16dd53c575d0cb9dbee20a3149927c862a9ff6" ], "author": { "name": "Shubhrajyoti Datta", "email": "shubhrajyoti@ti.com", "time": "Thu May 27 19:59:03 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu May 27 19:59:03 2010 +0200" }, "message": "hwmon: (lm75) Add support for the Texas Instruments TMP105\n\nAdd support for the Texas Instruments TMP105 temperature sensor\ndevice.\n\nSigned-off-by: Shubhrajyoti Datta \u003cshubhrajyoti@ti.com\u003e\nAcked-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "cff37c9e82e022068840b3d33167e64c6a0ecc06", "tree": "8ebce4d6d8cbc16a661e6548515d02f43d66ad58", "parents": [ "beb1b6bbf2b448b97b9611200eb4b5a555336c60" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu May 27 19:58:57 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu May 27 19:58:57 2010 +0200" }, "message": "hwmon: (tmp102) Various fixes\n\nFixes from my driver review:\nhttp://lists.lm-sensors.org/pipermail/lm-sensors/2010-March/028051.html\n\nOnly the small changes are in there, more important changes will come\nlater separately as time permits.\n\n* Drop the remnants of the now gone detect function\n* The TMP102 has no known compatible chip\n* Include the right header files\n* Clarify why byte swapping of register values is needed\n* Strip resolution info bit from temperature register value\n* Set cache lifetime to 1/3 second\n* Don\u0027t arbitrarily reject limit values; clamp as needed\n* Make limit writing unconditional\n* Don\u0027t check for transaction types the driver doesn\u0027t use\n* Properly check for error when setting configuration\n* Report error on failed probe\n* Make the driver load automatically where needed\n* Various other minor fixes\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Steven King \u003csfking@fdwdc.com\u003e\n" }, { "commit": "beb1b6bbf2b448b97b9611200eb4b5a555336c60", "tree": "ff20c6fe10e2ef0f29e5fe0f21caf1fcff5236d6", "parents": [ "dac6831e67e90d1cee430a66e7390e753c20d835" ], "author": { "name": "Steven King", "email": "sfking@fdwdc.com", "time": "Thu May 27 19:58:56 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu May 27 19:58:56 2010 +0200" }, "message": "hwmon: Driver for TI TMP102 temperature sensor\n\nDriver for the TI TMP102.\n\nThe TI TMP102 is similar to the LM75. It differs from the LM75 by\nhaving a 16-bit conf register and the temp registers have a minimum\nresolution of 12 bits; the extended conf register can select 13-bit\nresolution (which this driver does) and also change the update rate\n(which this driver currently doesn\u0027t use).\n\n[JD: Fix tmp102_exit tag, must be __exit, not __init.]\n\nSigned-off-by: Steven King \u003csfking@fdwdc.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "dac6831e67e90d1cee430a66e7390e753c20d835", "tree": "4840f28496f49700a1c6f53ce682ebe797406b65", "parents": [ "fa5575cff92eb43f467b9b00468d70d073e8b3d2" ], "author": { "name": "Kalhan Trisal", "email": "kalhan.trisal@intel.com", "time": "Thu May 27 19:58:56 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu May 27 19:58:56 2010 +0200" }, "message": "hwmon: EMC1403 thermal sensor support\n\nProvides support for the EMC1403 thermal sensor. Only reporting of values\nis supported. The various Moorestown specific extras to do with thermal\nalerts and the like are not in this version of the driver.\n\nConsiderably edited and tidied up by Alan Cox, plus fixes and detection\nbits from Jean Delvare.\n\nSigned-off-by: Kalhan Trisal \u003ckalhan.trisal@intel.com\u003e\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "10f2ed31aae11040dfd64cee10c47db79b4b4647", "tree": "bae22e065d19fba90db1f25c976166d742dd086e", "parents": [ "70dd6beac02f43a5099fcf5fddf68cfee0cbf479" ], "author": { "name": "Matthew Garrett", "email": "mjg@redhat.com", "time": "Thu May 27 19:58:38 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu May 27 19:58:38 2010 +0200" }, "message": "hwmon: (lm63) Add basic support for LM64\n\nThe LM64 appears to be an LM63 with added GPIO lines. Add support for the\nhwmon functionality - GPIO can be added at some later stage if someone\nhas a need for them.\n\nSigned-off-by: Matthew Garrett \u003cmjg@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "e0c70b80786296d4f3c35ebe0d52591cebf8f916", "tree": "a7d5193ceb5fed6a2a6647f592912ebeda497602", "parents": [ "4a70a413ccfd1c14ef29a290a4d2dada04ccbefb" ], "author": { "name": "Paul Thomas", "email": "pthomas8589@gmail.com", "time": "Mon May 24 14:33:38 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue May 25 08:07:07 2010 -0700" }, "message": "hwmon: add TI ads7871 a/d converter driver\n\n[akpm@linux-foundation.org: coding-style fixes]\nSigned-off-by: Paul Thomas \u003cpthomas8589@gmail.com\u003e\nCc: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "b00d8a7e299eab9970b0ba75a4e2ea1df39059ad", "tree": "91f03cedfec797cb2887cb95c61f3cae9596fe6a", "parents": [ "3f7cd7ea9383755eef53f92667c520489165667f" ], "author": { "name": "Jaswinder Singh Rajput", "email": "jaswinder@kernel.org", "time": "Mon Mar 29 22:03:06 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 29 22:03:06 2010 +0200" }, "message": "hwmon: (asc7621) Add X58 entry in Kconfig\n\nIntel X58 have asc7621a chip. So added X58 entry in Kconfig for asc7621.\nAlso arranged existing models in ascending order.\n\nSigned-off-by: Jaswinder Singh Rajput \u003cjaswinderrajput@gmail.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "a0a5e3488a51c46f383c5faa86b53828e30ce153", "tree": "be2df675c0fb15d477591d946ef6200cfecdfe69", "parents": [ "dc71afe5ac7e8d049bb991330518e4c898a7d92e" ], "author": { "name": "Amerigo Wang", "email": "amwang@redhat.com", "time": "Fri Mar 05 22:17:26 2010 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Mar 05 22:17:26 2010 +0100" }, "message": "hwmon: Remove the deprecated adt7473 driver\n\nadt7473 driver is obsoleted by adt7475 driver. And it is scheduled\nto be removed in Feb 2010.\n\nSigned-off-by: WANG Cong \u003camwang@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "d58de038728221f780e11d50b32aa40d420c1150", "tree": "270bbb4ca00bed94782dee9d18846edee4db2df0", "parents": [ "232449850229deeda84194e8a3c93a49ab6a043e" ], "author": { "name": "George Joseph", "email": "george.joseph@fairview5.com", "time": "Fri Mar 05 22:17:25 2010 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Mar 05 22:17:25 2010 +0100" }, "message": "hwmon: Driver for Andigilog aSC7621 family monitoring chips\n\nHwmon driver for Andigilog aSC7621 family monitoring chips.\n\nSigned-off-by: George Joseph \u003cgeorge.joseph@fairview5.com\u003e\nAcked-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "d84ca5b345c2b77ebf053d534ada6af2332a43b6", "tree": "6ed7d8e10828692cf6512255e08aae7036485785", "parents": [ "5852f9609d21794c45964129b03365883150a6d0" ], "author": { "name": "Wolfram Sang", "email": "w.sang@pengutronix.de", "time": "Fri Mar 05 22:17:23 2010 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Mar 05 22:17:23 2010 +0100" }, "message": "hwmon: Add driver for ADT7411 voltage and temperature sensor\n\nAdd basic support for the ADT7411. Reads out all conversion results (via I2C,\nSPI yet missing) and allows some on-the-fly configuration. Tested with a\ncustom board.\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Wolfram Sang \u003cw.sang@pengutronix.de\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "5852f9609d21794c45964129b03365883150a6d0", "tree": "cb49355a891eb942b785f98bfe958a095005547c", "parents": [ "ebec05bdc4f7d3da852aa86fb54b163d9aeb9848" ], "author": { "name": "Sven Anders", "email": "anders@anduras.de", "time": "Fri Mar 05 22:17:22 2010 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Mar 05 22:17:22 2010 +0100" }, "message": "hwmon: (w83793) Add watchdog functionality\n\nAdd watchdog functionality to the Winbond W83793 driver.\n\nSigned-off-by: Sven Anders \u003canders@anduras.de\u003e\nAcked-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "6771ea1fff988651593f78c122bc02e80f5100a0", "tree": "a7583f89769b553d7d8bbba42d30687043cd4a35", "parents": [ "64ba9926759792cf7b95f823402e2781edd1b5d4" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Mar 05 22:17:13 2010 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Mar 05 22:17:13 2010 +0100" }, "message": "hwmon: (lm90) Add support for the Winbond/Nuvoton W83L771AWG/ASG\n\nThis chips is found on several Zotac Ion ITX boards, amongst others.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: MC Matti \u003cmcmatti17@googlemail.com\u003e\nCc: Manuel Lamotte-Schubert \u003cmls@pronego.com\u003e\n" }, { "commit": "6102c315d896fb020550fb2481613485872978f6", "tree": "d0afc2dca7492c65be45af869b5988053bd92f2d", "parents": [ "a29815a333c6c6e677294bbe5958e771d0aad3fd", "3dd3a156355e7e6bec0dc9a0bbb6eeecbd965d50" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jan 11 09:45:55 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jan 11 09:45:55 2010 -0800" }, "message": "Merge branch \u0027hwmon-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging\n\n* \u0027hwmon-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:\n hwmon: Make PCI device ids constant\n hwmon: (coretemp) Fix TjMax for Atom N450/D410/D510 CPUs\n hwmon: (k10temp) Blacklist more family 10h processors\n hwmon: (asus_atk0110) Add debugfs interface\n hwmon: (asus_atk0110) Refactor interface probe code\n hwmon: (adt7462) Fix pin 28 monitoring\n" }, { "commit": "b5430a04e995081a308b4419bd0940f2badc6e6b", "tree": "47f214dbf6126043fd9f7faa8103a72446734309", "parents": [ "24f3c59e1781435835083eab587399c8bdc235b4" ], "author": { "name": "Tomaz Mertelj", "email": "tomaz.mertelj@guest.arnes.si", "time": "Fri Jan 08 14:43:04 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jan 11 09:34:06 2010 -0800" }, "message": "hwmon: driver for Texas Instruments amc6821 chip\n\nSigned-off-by: \u003ctomaz.mertelj@guest.arnes.si\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "1fe63ab47a617ee95f562eaa7ddbbc59981ff8c6", "tree": "45b7d542d9a9b25bb9416f92f748c336d9aae40f", "parents": [ "c5114a1cd6d84b2b3144c1c3e093c80ca6c30f47" ], "author": { "name": "Yong Wang", "email": "yong.y.wang@linux.intel.com", "time": "Sun Jan 10 20:52:34 2010 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sun Jan 10 20:52:34 2010 +0100" }, "message": "hwmon: (coretemp) Fix TjMax for Atom N450/D410/D510 CPUs\n\nThe max junction temperature of Atom N450/D410/D510 CPUs is 100 degrees\nCelsius. Since these CPUs are always coupled with Intel NM10 chipset in\none package, the best way to verify whether an Atom CPU is N450/D410/D510\nis to check the host bridge device.\n\nSigned-off-by: Yong Wang \u003cyong.y.wang@intel.com\u003e\nAcked-by: Huaxu Wan \u003chuaxu.wan@intel.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "e82b1dae2a8730c89e2a30c5c28562ef066f39d9", "tree": "4811b7fd81c45d6d9b35bbd0519f8bc232dde616", "parents": [ "fc6f0700d5cd54b5f8b30c4f0d93b06a6ba04b81", "c46c0e9188685c0276b4c0adf9fb7e903937e35b" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Dec 17 16:48:08 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Dec 17 16:48:08 2009 -0800" }, "message": "Merge branch \u0027hwmon-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging\n\n* \u0027hwmon-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:\n hwmon: (w83627hf) Fix for \"No such device\"\n hwmon: (sht15) Off-by-one error in array index + incorrect constants\n hwmon: Add driver for VIA CPU core temperature\n hwmon: (smsc47m1) Enable device if needed\n hwmon: (smsc47m1) Fail module loading on error\n hwmon: (smsc47m1) Only request I/O ports we really use\n hwmon: New driver for AMD Family 10h/11h CPUs\n" }, { "commit": "312ea07bf067d41b339473e696f9199245d762f3", "tree": "8b1ba417d0b240d933d12d5f1fd73733e4cbdfd8", "parents": [ "ec8e2f7466ca370f5e09000ca40a71759afc9ac8" ], "author": { "name": "Samu Onkalo", "email": "samu.p.onkalo@nokia.com", "time": "Thu Dec 17 15:27:07 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Dec 17 15:45:30 2009 -0800" }, "message": "hwmon: I2C bus support for lis3lv02d and variant accelerometer chips\n\nSigned-off-by: Samu Onkalo \u003csamu.p.onkalo@nokia.com\u003e\nCc: Éric Piel \u003ceric.piel@tremplin-utc.net\u003e\nCc: Kalhan Trisal \u003ckalhan.trisal@intel.com\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "70c38772aef27b01dc236fb4016261c3828df6aa", "tree": "c66cd382d357d9066ea5fa0325690e7a1e0902ba", "parents": [ "fa0bff02239abdad446effef22e5db281cf3d562" ], "author": { "name": "Harald Welte", "email": "HaraldWelte@viatech.com", "time": "Wed Dec 16 21:38:28 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 16 21:38:28 2009 +0100" }, "message": "hwmon: Add driver for VIA CPU core temperature\n\nThis is a driver for the on-die digital temperature sensor of\nVIA\u0027s recent CPU models.\n\n[JD: Misc clean-ups.]\n\nSigned-off-by: Harald Welte \u003cHaraldWelte@viatech.com\u003e\nCc: Juerg Haefliger \u003cjuergh@gmail.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nTested-by: Adam Nielsen \u003ca.nielsen@shikadi.net\u003e\n" }, { "commit": "3c57e89b467d1db6fda74d5c97112c8b9466dd97", "tree": "d826e1bff6ac786adf2ee68c403b011a16448b77", "parents": [ "8bea8672edfca7ec5f661cafb218f1205863b343" ], "author": { "name": "Clemens Ladisch", "email": "clemens@ladisch.de", "time": "Wed Dec 16 21:38:25 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 16 21:38:25 2009 +0100" }, "message": "hwmon: New driver for AMD Family 10h/11h CPUs\n\nThis adds a driver for the internal temperature sensor of AMD Family 10h\nand 11h CPUs.\n\nSigned-off-by: Clemens Ladisch \u003cclemens@ladisch.de\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "bc62c1471773fc32adcfc05100abd16fa2b6e126", "tree": "34894261672d0c73c01b46ed92ebad7eb75ea8c4", "parents": [ "66c8569bf990064b3f11e0f211a81a46e0b627ff" ], "author": { "name": "Éric Piel", "email": "eric.piel@tremplin-utc.net", "time": "Mon Dec 14 18:01:39 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Dec 15 08:53:36 2009 -0800" }, "message": "lis3: update documentation and comments\n\nMost of the documentation and comments were written when the driver was\nonly supporting one type of chip, only via ACPI/HP. Update the info to\nthe much clearer understanding that we have now.\n\nSigned-off-by: Éric Piel \u003ceric.piel@tremplin-utc.net\u003e\nSigned-off-by: Samu Onkalo \u003csamu.p.onkalo@nokia.com\u003e\nCc: Pavel Machek \u003cpavel@ucw.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "54fe4671aa5853ca88da72d67e969a3d8de6dcf6", "tree": "d92f5306dc6c2deedf8bb082f9a848f77110258d", "parents": [ "b058b8596136d97b9469366f1f97fb35accf3d66" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:36:08 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:36:08 2009 +0100" }, "message": "hwmon: (adt7475) Add VID support for the ADT7476\n\nThe ADT7476 has 5 dedicated pins for VID input, and the +12V input can\noptionally be used as a 6th VID pin. Add support for VID input.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nCc: Jordan Crouse \u003cjordan@cosmicpenguin.net\u003e\nCc: \"Darrick J. Wong\" \u003cdjwong@us.ibm.com\u003e\n" }, { "commit": "d8d2ee073274ab666282d1942d08f1bb454d715b", "tree": "c36ac0f8a63f3ff83a312c61a19d6dde1d5c34da", "parents": [ "ebfaf1fbb6010204e973e329034d0004d6521503" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:36:08 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:36:08 2009 +0100" }, "message": "hwmon: (adt7475) Add support for the ADT7476\n\nAdd support for the Analog Devices ADT7476 chip. This chip is largely\ncompatible with the ADT7473 and ADT7475, with additional features.\nIn particular, it has 5 voltage inputs instead of 2, and VID input\npins.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nCc: Jordan Crouse \u003cjordan@cosmicpenguin.net\u003e\nCc: \"Darrick J. Wong\" \u003cdjwong@us.ibm.com\u003e\n" }, { "commit": "3d849981711741e76e501e4b9e3e7b792f2b0fd5", "tree": "0948d147f41b9d637cd2b2ef9afb044983dcd59f", "parents": [ "d656b6fde2531a13c4e68a3ce6b9f12bc19d96bb" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:36:05 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:36:05 2009 +0100" }, "message": "hwmon: (adt7475) Add support for the ADT7490\n\nAdd support for the Analog Devices ADT7490 chip. This chip is largely\ncompatible with the ADT7473 and ADT7475, with additional features.\nIn particular, it has 6 voltage inputs instead of 2.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nCc: Jordan Crouse \u003cjordan@cosmicpenguin.net\u003e\nCc: \"Darrick J. Wong\" \u003cdjwong@us.ibm.com\u003e\n" }, { "commit": "b180d0508475c5c55085839d22f454c69379eacc", "tree": "7c1dfe50aca689ff985a3cba16dd373669b7e894", "parents": [ "7669896f499e1bce5cfb38f2685ff583ecdb24dd" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:36:02 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:36:02 2009 +0100" }, "message": "hwmon: (adt7475) Add support for the ADT7473\n\nAdd support for the ADT7473 to the adt7475 driver, and mark the\nadt7473 driver for removal. The ADT7473 and ADT7475 chips are almost\nthe same chip and essentially compatible, so there\u0027s no point in\nhaving separate drivers for them.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: \"Mark M. Hoffman\" \u003cmhoffman@lightlink.com\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nCc: Jordan Crouse \u003cjordan@cosmicpenguin.net\u003e\nCc: \"Darrick J. Wong\" \u003cdjwong@us.ibm.com\u003e\n" }, { "commit": "7669896f499e1bce5cfb38f2685ff583ecdb24dd", "tree": "ac73a6c61327d36518ebbe9625620de974fa878e", "parents": [ "fc16c56e694d361388bae701894fd719dbc0f7eb" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Wed Dec 09 20:36:01 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:36:01 2009 +0100" }, "message": "hwmon: (f71882fg) Add support for the f71889fg (version 2)\n\nThis adds support for the Fintek f71889fg to the f71882fg driver,\nmany thanks to Gerd v. Egidy for providing (remote) access to a\nmachine which such an ic.\n\nNote that this bit of the patch:\n-\tval \u003d SENSORS_LIMIT(val, 0, 255);\n+\n+\tif (data-\u003etype \u003d\u003d f71889fg)\n+\t\tval \u003d SENSORS_LIMIT(val, -128, 127);\n+\telse\n+\t\tval \u003d SENSORS_LIMIT(val, 0, 127);\n\nChanges behaviour for already supported models, the new behaviour is correct\nas the already supported models have bit 7 of the involved registers fixed at\n0, so the previous behaviour which allowed setting temp zone limits \u003e 127\nwas not correct.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "93ee0a75f6e4b2c7ec20fd8f4ace87f88ba785b9", "tree": "ced868220c593e2cdfbf51edf24368fe8061ce40", "parents": [ "d1ebd59a74d764ab74cda8d09589b7ab5f5529fd" ], "author": { "name": "Luotao Fu", "email": "l.fu@pengutronix.de", "time": "Wed Dec 09 20:35:58 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:35:58 2009 +0100" }, "message": "hwmon: Add Freescale MC13783 ADC driver\n\nThis driver provides support for the ADC integrated into the\nFreescale MC13783 PMIC.\n\nSigned-off-by: Luotao Fu \u003cl.fu@pengutronix.de\u003e\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Uwe Kleine-König \u003cu.kleine-koenig@pengutronix.de\u003e\nReviewed-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nCc: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "d1ebd59a74d764ab74cda8d09589b7ab5f5529fd", "tree": "1424bb6e6a0d7efe0e2c65af32e2829f6b09c86d", "parents": [ "52df6440a29123eed912183fe785bbe174ef14b9" ], "author": { "name": "Marc Hulsman", "email": "m.hulsman@tudelft.nl", "time": "Wed Dec 09 20:35:58 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:35:58 2009 +0100" }, "message": "hwmon: (w83791d) Remove experimental dependency\n\nThe w83791d driver has been in the kernel for a while now,\ntime to remove the EXPERIMENTAL dependency.\n\nSigned-off-by: Marc Hulsman \u003cm.hulsman@tudelft.nl\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "4e233cbed249ea94d989b8be08eac0414dbdc44b", "tree": "b982bec479da48c41493af65b603e1c2e727e42a", "parents": [ "b72656dbc491484765776a16eeb55ef2e90efea6" ], "author": { "name": "Adrien Demarez", "email": "adrien.demarez@bolloretelecom.eu", "time": "Wed Dec 09 20:35:50 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Dec 09 20:35:50 2009 +0100" }, "message": "hwmon: New driver for the National Semiconductor LM73\n\nThe National Semiconductor LM73 is a single temperature sensor, much\nlike the famous LM75.\n\nSigned-off-by: Adrien Demarez \u003cadrien.demarez@bolloretelecom.eu\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "384e724b6b396de32c1e9cb0b7ccdd011bcc2beb", "tree": "8987f38503b2a119ae36322d30e393bf274e9a0f", "parents": [ "05576a1e38e2d06dece32974c5218528d3fbc6e2" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Fri Oct 09 20:35:21 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Oct 09 20:35:21 2009 +0200" }, "message": "hwmon: (s3c-hwmon) Disable build for S3C64xx\n\nThe s3c-hwmon driver depends on the arch/arm implementation of the core\nADC support for the chip. Since the S3C64xx version has not yet been\nmerged disable building of the driver on S3C64xx for now.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nCc: Ben Dooks \u003cben-linux@fluff.org\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "708a62bcd5f699756bae81491e64648fbf19e2a4", "tree": "4d56e0d672bcdfe8b1f46980f9e7374e7e729307", "parents": [ "91f17e02a224dc649eaffc8e0bca6db85efb9cd7" ], "author": { "name": "Rudolf Marek", "email": "r.marek@assembler.cz", "time": "Wed Sep 23 22:59:42 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Sep 23 22:59:42 2009 +0200" }, "message": "hwmon: (coretemp) Fix Atom CPUs support\n\nFix Atom CPUs support. Intel documents TjMax at 90 degrees C but\nsome Atoms may have 125 degrees C (this is undocumented speculation).\n\nSigned-off-by: Rudolf Marek \u003cr.marek@assembler.cz\u003e\nCc: Huaxu Wan \u003chuaxu.wan@linux.intel.com\u003e\nCc: Kent Liu \u003ckent.liu@linux.intel.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "91f17e02a224dc649eaffc8e0bca6db85efb9cd7", "tree": "5f538b6afab29f1e63cabdfa42a93d9a14e9d4d8", "parents": [ "49dc9efed05ad3e49000097ce1ec31cd3bbc909b" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Sep 23 22:59:42 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Sep 23 22:59:42 2009 +0200" }, "message": "hwmon: Delete deprecated FSC drivers\n\nThe legacy fscpos and fscher drivers have been replaced by the unified\nfschmd driver. The transition period is over now, we can delete them.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Hans de Goede \u003chdegoede@redhat.com\u003e\n" }, { "commit": "6f130478e24d810078c3f0ee292bcc4ec034dcce", "tree": "1c782ccceaf998e9e23862094588c125ee6f38af", "parents": [ "6f128fa344833bf8bf076a51d14401661c146470", "75f2ba8f0006440e720e47ae14c917e07c452d72" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 09:22:36 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 09:22:36 2009 -0700" }, "message": "Merge branch \u0027for-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6\n\n* \u0027for-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (55 commits)\n regulator: Voltage count for AB3100\n mfd: Convert WM8350 to use request_threaded_irq()\n mfd: Update MAINTAINERS patterns for WM831x\n mfd: Fix twl4030-power warnings\n regulator: AB3100 support\n rtc: AB3100 RTC support\n mfd: Fix ab3100-otp build failure\n mfd: OMAP: Board-specifc twl4030 DPS scripts for RX51 board\n mfd: Print warning for twl4030 out-of-order script loading\n mfd: Add support for TWL4030/5030 dynamic power switching\n mfd: AB3100 OTP readout\n regulator: Add Freescale MC13783 driver\n mfd: Add Freescale MC13783 driver\n mfd: AB3100 disable irq nosync\n mfd: AB3100 alter default setting\n mfd: AB3100 propagate error\n mfd: AB3100 accessor function cleanups\n rtc: Add support for RTCs on Wolfson WM831x devices\n regulator: get pcap data from the parent device\n input: PCAP2 misc input driver\n ...\n" }, { "commit": "08bad5a821371548942aa13565831f18fe1875f3", "tree": "9b689f0bc2ab63700909b9b3af19cee0c7aa1dbd", "parents": [ "e4b736f18f338daae141325c818187c4ab3e244c" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Tue Jul 28 15:52:22 2009 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:47:02 2009 +0200" }, "message": "hwmon: WM831x PMIC hardware monitoring driver\n\nThis driver adds support for the hardware monitoring features of\nthe WM831x PMICs to the hwmon API. Monitoring is provided for\nthe system voltages supported natively by the WM831x, the chip\ntemperature, the battery temperature and the auxiliary inputs\nof the WM831x.\n\nCurrently no alarms are supported, though digital comparators on\nthe WM831x devices would allow these to be provided.\n\nSince the auxiliary and battery temperature input scaling depends\non the system configuration the value is reported as a voltage to\nuserspace.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "fb6c023a2b845df1ec383b74644ac35a4bbb76b6", "tree": "dbb8acdaa37c8ce80ee702a55f672476b6e45444", "parents": [ "39b1772a24126d74699cea623f96b50ca6b6f08f" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Mon Jul 20 12:43:45 2009 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:46:51 2009 +0200" }, "message": "hwmon: Add WM835x PMIC hardware monitoring driver\n\nThis driver provides reporting of the status supply voltage rails\nof the WM835x series of PMICs via the hwmon API.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "61cba5c244bd52e91c01e9f79abba30e54f68dd8", "tree": "d48447931151df466aaf8ddb71de485711bea581", "parents": [ "86855b0c1fd75338c67cabbf85d64d033612c47b" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Sep 15 17:18:13 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Sep 15 17:18:13 2009 +0200" }, "message": "hwmon: Clearly mark ACPI drivers as such\n\nNow that we have ACPI-based hardware monitoring drivers, and we will\nstart telling users to use them instead of native drivers when I/O\nresources conflict, I think it would be good to clearly mark ACPI\ndrivers as such in Kconfig.\n\nAlso, in the case of monolithic kernels, I think the ACPI drivers\nshould take precedence over native drivers, so they should be listed\nfirst in Makefile.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Luca Tettamanti \u003ckronos.it@gmail.com\u003e\n" }, { "commit": "9410700b881f867a50dd8dc3204372fd9dccd8f8", "tree": "d41a31183e3716bb2ac8e548843653bbcf54105d", "parents": [ "5bed13f5809927be10facccb63add834b712df51" ], "author": { "name": "Andre Prendel", "email": "andre.prendel@gmx.de", "time": "Tue Sep 15 17:18:11 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Sep 15 17:18:11 2009 +0200" }, "message": "hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips\n\nAdd support for Texas Instruments TMP421/422/423 temperature sensor IC.\n\nTI\u0027s TMP421/422/423 are I2C temperature sensor chips. These chips are\nsimilar to TI\u0027s TMP401/411 chips, but with reduced functionality (only\ntemperature measurement). The chips have one local sensor and up to\nthree (TMP423) remote sensors.\n\nSigned-off-by: Andre Prendel \u003candre.prendel@gmx.de\u003e\nAcked-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "bff78650a2b0ed42b8fb134b6a9b387e00027d67", "tree": "63eb51aafad3f5f8039d9c8a9847c599e7ff95d8", "parents": [ "e170adcb406504b8acd35554c69830c11916be1f" ], "author": { "name": "Ben Dooks", "email": "ben@simtec.co.uk", "time": "Sat Jul 18 10:12:28 2009 +0100" }, "committer": { "name": "Ben Dooks", "email": "ben-linux@fluff.org", "time": "Sat Jul 18 10:15:54 2009 +0100" }, "message": "ARM: HWMON: S3C24XX series ADC driver\n\nAdd support for the ADC controller on the S3C series of processors to\ndrivers/hwmon for use with hardware monitoring systems.\n\nSigned-off-by: Ben Dooks \u003cben@simtec.co.uk\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\n" }, { "commit": "517d08699b250021303f9a7cf0d758b6dc0748ed", "tree": "5e5b0134c3fffb78fe9d8b1641a64ff28fdd7bbc", "parents": [ "8eeee4e2f04fc551f50c9d9847da2d73d7d33728", "a34601c5d84134055782ee031d58d82f5440e918" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Jun 16 19:50:13 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Jun 16 19:50:13 2009 -0700" }, "message": "Merge branch \u0027akpm\u0027\n\n* akpm: (182 commits)\n fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset\n fbdev: *bfin*: fix __dev{init,exit} markings\n fbdev: *bfin*: drop unnecessary calls to memset\n fbdev: bfin-t350mcqb-fb: drop unused local variables\n fbdev: blackfin has __raw I/O accessors, so use them in fb.h\n fbdev: s1d13xxxfb: add accelerated bitblt functions\n tcx: use standard fields for framebuffer physical address and length\n fbdev: add support for handoff from firmware to hw framebuffers\n intelfb: fix a bug when changing video timing\n fbdev: use framebuffer_release() for freeing fb_info structures\n radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb?\n s3c-fb: CPUFREQ frequency scaling support\n s3c-fb: fix resource releasing on error during probing\n carminefb: fix possible access beyond end of carmine_modedb[]\n acornfb: remove fb_mmap function\n mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF\n mb862xxfb: restrict compliation of platform driver to PPC\n Samsung SoC Framebuffer driver: add Alpha Channel support\n atmel-lcdc: fix pixclock upper bound detection\n offb: use framebuffer_alloc() to allocate fb_info struct\n ...\n\nManually fix up conflicts due to kmemcheck in mm/slab.c\n" }, { "commit": "dc6ea97bac6b8228c7a69740df35eed2be3407be", "tree": "68c14ab8e8c0c245f61d74671f2036386a0ef6ec", "parents": [ "a002ee896dfd08ce9fba44e9ae513c9094699a27" ], "author": { "name": "Eric Piel", "email": "eric.piel@tremplin-utc.net", "time": "Tue Jun 16 15:34:15 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Jun 16 19:47:57 2009 -0700" }, "message": "lis3: use input_polled_device\n\nNow that there is no need to hookup on the open/close of the joystick,\nit\u0027s possible to use the simplified interface input_polled_device, instead\nof creating our own kthread.\n\n[randy.dunlap@oracle.com: fix Kconfig]\n[randy.dunlap@oracle.com: fix Kconfig some more]\nSigned-off-by: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nSigned-off-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "09475d32e652fe60901fe8c9cd50f3f6db0c4933", "tree": "895d7f0d2195e6e6902b6fc8f56cdc4228f0913f", "parents": [ "b6858bca8d7bf52e2564cba5a5ed87e1019d3fd9" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Mon Jun 15 18:39:52 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:52 2009 +0200" }, "message": "hwmon: (f71882fg) Add support for the F71858F\n\nAdd support for the hwmon part of the Fintek F71858FG superio IC to the\nf71882fg driver. Many thanks to Jelle de Jong for lending me a motherboard \nwith this superio on it.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "ab2b79d5e22d3cdd2b191e479c60e69df528369a", "tree": "cb7ed54072090347e455373e8174613e9a32b85f", "parents": [ "8070408b5446232ba6eb6e0809a329da58a6ae52" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Mon Jun 15 18:39:46 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:46 2009 +0200" }, "message": "hwmon: (tmp401) Add support for TI\u0027s TMP401 sensor chip\n\nThis is a new hwmon driver for TI\u0027s TMP401 temperature sensor IC. This driver\nwas written on behalf of an embedded systems vendor under the\nLinux driver project.\n\nIt has been tested using a TI TMP401 sample attached to a i2c-tiny-usb adapter.\nWhich was provided by Till Harbaum, many thanks to him for this!\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "8070408b5446232ba6eb6e0809a329da58a6ae52", "tree": "1d50a3a6df79cff77abb390ac5611a093bc4ac17", "parents": [ "cd659fd0d7c91b7830d1fea0c76a640e171d2d43" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Mon Jun 15 18:39:46 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:46 2009 +0200" }, "message": "hwmon: (ibmaem) Automatically load on HC10 blade\n\nEnable auto-probing for the HC10 blade and amend the supported system\nlist.\n\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "251eb40f5ccd07a905633a816fbf8f2b6b25cced", "tree": "6e5c1579acbdfb240745e4b9b3f6e999681ce4d8", "parents": [ "133bb070e94ab41d750c6f2160c8843e46f11b78" ], "author": { "name": "Jonathan Cameron", "email": "jic23@cam.ac.uk", "time": "Mon Apr 13 14:39:45 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Apr 13 15:04:29 2009 -0700" }, "message": "hwmon: sht15 humidity sensor driver\n\nData sheet at:\nhttp://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf\n\nThese sensors communicate over a 2 wire bus running a device specific\nprotocol. The complexity of the driver is mainly due to handling the\nsubstantial delays between requesting a reading and the device pulling the\ndata line low to indicate that the data is available. This is handled by\nan interrupt that is disabled under all other conditions.\n\nI wasn\u0027t terribly clear on the best way to handle this, so comments on\nthat aspect would be particularly welcome!\n\nInterpretation of the temperature depends on knowing the supply voltage.\nIf configured in a board config as a regulator consumer this is obtained\nfrom the regulator subsystem. If not it should be provided in the\nplatform data.\n\nI\u0027ve placed this driver in the hwmon subsystem as it is definitely a\ndevice that may be used for hardware monitoring and with it\u0027s relatively\nslow response times (up to 120 millisecs to get a reading) a caching\nstrategy certainly seems to make sense!\n\nSigned-off-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "10a0d912898ac2fe49094acf2c1339d0fb4c2bc6", "tree": "ca87b31c5b958599b313e40cc141748664687c51", "parents": [ "51dcdfec6a274afc1c6fce180d582add9ff512c0", "2c03d07ad54db03b813bb98c469790c07ca9f5dd" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Apr 07 08:44:43 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Apr 07 08:44:43 2009 -0700" }, "message": "Merge branch \u0027hwmon-for-linus\u0027 of git://jdelvare.pck.nerim.net/jdelvare-2.6\n\n* \u0027hwmon-for-linus\u0027 of git://jdelvare.pck.nerim.net/jdelvare-2.6:\n hwmon: Add Asus ATK0110 support\n hwmon: (lm95241) Convert to new-style i2c driver\n" }, { "commit": "3bcfa9e47a7d1be6faef3be6c4b2049e585e2f38", "tree": "7cc0896fb4ee501fb08560adc1747b7e5a7544cf", "parents": [ "6260a4b0521a41189b2c2a8119096c1e21dbdf2c" ], "author": { "name": "Herbert Valerio Riedel", "email": "hvr@gnu.org", "time": "Mon Apr 06 19:00:30 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Apr 07 08:31:03 2009 -0700" }, "message": "hwmon: add support for GMT G760A fan speed PWM controller\n\nThis controller can be found on the D-Link DNS-323 for instance, where\nit is to be configured via static i2c_board_info in the board-specific\nmach-orion/dns323-setup.c; this driver supports only the new-style\ndriver model.\n\nTested-by: Martin Michlmayr \u003ctbm@cyrius.com\u003e\nSigned-off-by: Herbert Valerio Riedel \u003chvr@gnu.org\u003e\nSigned-off-by: Matthew Palmer \u003cmpalmer@debian.org\u003e\nSigned-off-by: Laurie Bradshaw \u003cbradshaw.laurie@googlemail.com\u003e\nSigned-off-by: Martin Michlmayr \u003ctbm@cyrius.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "2c03d07ad54db03b813bb98c469790c07ca9f5dd", "tree": "3ca6b4c0f3ea3d20cb9acc410c2e822846d0d590", "parents": [ "797eaa4b0242a41cb6bc913890b9ec22ec8788ed" ], "author": { "name": "Luca Tettamanti", "email": "kronos.it@gmail.com", "time": "Tue Apr 07 15:32:59 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Apr 07 15:32:59 2009 +0200" }, "message": "hwmon: Add Asus ATK0110 support\n\nAsus boards have an ACPI interface for interacting with the hwmon (fan,\ntemperatures, voltages) subsystem; this driver exposes the relevant\ninformation via the standard sysfs interface.\n\nThere are two different ACPI interfaces:\n- an old one (based on RVLT/RFAN/RTMP)\n- a new one (GGRP/GITM)\nBoth may be present but there a few cases (my board, sigh) where the\nnew interface is just an empty stub; the driver defaults to the old one\nwhen both are present.\nThe old interface has received a considerable testing, but I\u0027m still\nawaiting confirmation from my tester that the new one is working as\nexpected (hence the debug code is still enabled).\n\nCurrently all the attributes are read-only, though a (partial) control\nshould be possible with a bit more work.\n\nSigned-off-by: Luca Tettamanti \u003ckronos.it@gmail.com\u003e\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "bb233fdfc7b7cefe45bfa2e8d1b24e79c60a48e5", "tree": "b95c8f5b1a26f807755ca18d99b09627e184b33e", "parents": [ "a38da2ed74f628c1f3e907c772be21a66eccab9c" ], "author": { "name": "Daniel Mack", "email": "daniel@caiaq.de", "time": "Tue Mar 31 15:24:33 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Apr 01 08:59:22 2009 -0700" }, "message": "lis3: SPI transport layer\n\nMake use of the new abstraction layer and add a new transport layer for\nspi. Works fine on a PXA based board.\n\nSigned-off-by: Daniel Mack \u003cdaniel@caiaq.de\u003e\nAcked-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nAcked-by: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "72f5de92e199f96cfcea125aefc76c138d8c553c", "tree": "ef24990f791801283f520b5f96a4ea1e592bf37b", "parents": [ "061603275814544842e7df77d1157eff18565997" ], "author": { "name": "Ira Snyder", "email": "iws@ovro.caltech.edu", "time": "Tue Mar 31 15:24:29 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Apr 01 08:59:21 2009 -0700" }, "message": "hwmon: Add LTC4215 driver\n\nAdd Linux support for the Linear Technology LTC4215 Hot Swap controller\nI2C monitoring interface.\n\nI have tested the driver with my board, and it appears to work fine. With\nthe power supplies disabled, it reads 11.93V input, 1.93V output, no\ncurrent and no power. With the supplies enabled, it reads 11.93V input,\n11.98V output, no current, no power. I\u0027m not drawing any current at the\nmoment, so this is reasonable. The value in the sense register never\nreads anything except 0, so I expect to get zero from the current and\npower calculations.\n\nI didn\u0027t attempt to support changing any of the chip\u0027s settings or\nenabling the FET. I\u0027m not sure even how to do that and still fit within\nthe hwmon framework. :)\n\nSigned-off-by: Ira W. Snyder \u003ciws@ovro.caltech.edu\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: \"Mark M. Hoffman\" \u003cmhoffman@lightlink.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "061603275814544842e7df77d1157eff18565997", "tree": "4582b2e3e156eb2f0984df34e5469c96c3c4f9c0", "parents": [ "be84cfc588b19f14764d78556dc7b630ee8c914c" ], "author": { "name": "Davide Rizzo", "email": "elpa.rizzo@gmail.com", "time": "Tue Mar 31 15:24:27 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Apr 01 08:59:21 2009 -0700" }, "message": "hwmon: LM95241 driver\n\nAn hwmon driver for the National Semiconductor LM95241 triple temperature\nsensors chip\n\nSigned-off-by: Davide Rizzo \u003celpa-rizzo@gmail.com\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: \"Mark M. Hoffman\" \u003cmhoffman@lightlink.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "de15f093e666ccd542f6f7a0e3e917166a07ab44", "tree": "ba0fb9235e3267812f2580306c27d7087d9fd7f3", "parents": [ "c69ab2b78efbe388bb0fc5d885b718ff4668cceb" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Mon Mar 30 21:46:45 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:45 2009 +0200" }, "message": "hwmon: (fschmd) Add support for the FSC Hades IC\n\nAdd support for the Hades to the FSC hwmon driver.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "c69ab2b78efbe388bb0fc5d885b718ff4668cceb", "tree": "a970ddcc436d1e80cc37e2937f8e32883afe73ba", "parents": [ "fa5bfab7128e58c31448fca83a288a86e7d476cc" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Mon Mar 30 21:46:45 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:45 2009 +0200" }, "message": "hwmon: (fschmd) Add support for the FSC Syleus IC\n\nMany thanks to Fujitsu Siemens Computers for providing docs and a\nmachine to test the driver on.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "fb4504fe84b09cbf49fda19e6630a1003d79656a", "tree": "d2e623b65fb91f18a02b3435f5a25e8b36572815", "parents": [ "a157d06d4d70318a0818552095071d7430dd5d34" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:43 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:43 2009 +0200" }, "message": "Move the pcf8591 driver to hwmon\n\nDirectory drivers/i2c/chips is going away, so drivers there must find\nnew homes. For the pcf8591 driver, the best choice seems to be the\nhwmon subsystem. While the Philips PCF8591 device isn\u0027t a typical\nhardware monitoring chip, its DAC interface is compatible with the\nhwmon one, so it fits somewhat.\n\nIf a better subsystem is ever created for ADC/DAC chips, the driver\ncould be moved there.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Aurelien Jarno \u003caurelien@aurel32.net\u003e\n" }, { "commit": "237c8d2f54ff12bd4fea1a9d18a94ae5810271d3", "tree": "f93114b8b4c24a59151353cdfb63dd52fa055f9b", "parents": [ "1704b26ee3fd89c76724cbea238e951dc019faca" ], "author": { "name": "Gong Jun", "email": "JGong@nuvoton.com", "time": "Mon Mar 30 21:46:42 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:42 2009 +0200" }, "message": "hwmon: (w83627ehf) Add support for W83667HG\n\nAdd initial support for the Nuvoton W83667HG chip to the w83627ehf\ndriver. It has been tested on ASUS P5QL PRO by Gong Jun.\n\nAt the moment there is still a usability issue which is that only in6\nor temp3 can be present on the W83667HG, so the driver shouldn\u0027t\nexpose both. This will be addressed later.\n\nSigned-off-by: Gong Jun \u003cJGong@nuvoton.com\u003e\nAcked-by: David Hubbard \u003cdavid.c.hubbard@gmail.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "1a51e068c900eb6ea23ce597361ebf3b19a57b23", "tree": "dc09428e13a8696d03f5c5919dc5bb867d7f63cc", "parents": [ "3bb9db79235e19dbb18ba6f4a428a97c69115319" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Thu Mar 12 13:36:38 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Mar 12 13:36:38 2009 +0100" }, "message": "hwmon: (lm90) Document support for the MAX6648/6692 chips\n\nUpdate documentation to prevent further confusion/duplication.\n\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "7e92214b539ea17ccaf0886d140cbba9801a4d40", "tree": "5a678acfca63f485fd02c83932ffcfa486657650", "parents": [ "6364853dabe78dda7ffdfb8803c1e56c0fff2e43", "46a5f173fc88ffc22651162033696d8a9fbcdc5c" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Jan 15 16:40:12 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Jan 15 16:40:12 2009 -0800" }, "message": "Merge branch \u0027hwmon-for-linus\u0027 of git://jdelvare.pck.nerim.net/jdelvare-2.6\n\n* \u0027hwmon-for-linus\u0027 of git://jdelvare.pck.nerim.net/jdelvare-2.6:\n hwmon: (abituguru3) Fix CONFIG_DMI\u003dn fallback to probe\n hwmon: (abituguru3) Enable DMI probing feature on IN9 32X MAX\n hwmon: (abituguru3) Match partial DMI board name strings\n hwmon: Add a driver for the ADT7475 hardware monitoring chip\n hwmon: (k8temp) Fix temperature reporting for (most) K8 RevG CPUs\n hwmon: (k8temp) Fix wrong sensor selection for AMD K8 RevF/RevG CPUs\n hwmon: (k8temp) Warn about fam F rev F errata\n" }, { "commit": "9e0c79782143a816ba7d7f0f6e195091a97053f6", "tree": "109a347061a1e2d1e08aa3908b893e2ee55f9732", "parents": [ "5b019e99016f3a692ba45bf68fba73a402d7c01a" ], "author": { "name": "Eric Piel", "email": "eric.piel@tremplin-utc.net", "time": "Thu Jan 15 13:51:23 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Jan 15 16:39:40 2009 -0800" }, "message": "lis3lv02d: merge with leds hp disk\n\nMove the second part of the HP laptop disk protection functionality (a red\nled) to the same driver. From a purely Linux developer\u0027s point of view,\nthe led and the accelerometer have nothing related. However, they\ncorrespond to the same ACPI functionality, and so will always be used\ntogether, moreover as they share the same ACPI PNP alias, there is no\nother simple to allow to have same loaded at the same time if they are not\nin the same module. Also make it requires the led class to compile and\nupdate the Kconfig text.\n\nSigned-off-by: Pavel Machek \u003cpavel@suse.cz\u003e\nSigned-off-by: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "1c301fc5394f7e1aa4c201e6e03d55d9c08b3bdf", "tree": "579d27b572c965a377a9a8da7ff16d7f9febfe1b", "parents": [ "76ff08da34196cfa308fcd3552bb9ea20888e745" ], "author": { "name": "Jordan Crouse", "email": "jordan.crouse@amd.com", "time": "Thu Jan 15 22:27:47 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Jan 15 22:27:47 2009 +0100" }, "message": "hwmon: Add a driver for the ADT7475 hardware monitoring chip\n\nHwmon driver for the ADT7475 chip.\n\nSigned-off-by: Jordan Crouse \u003cjordan.crouse@amd.com\u003e\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "c8ac32e4711639c81e5f4d4cd78c8f21675a2bae", "tree": "3ec6572d74cf2fc824a8176aa5f3adeac04002ed", "parents": [ "2b7300513b98e05058a803de3beb8a1c0a0c61d9" ], "author": { "name": "Manuel Lauss", "email": "mano@roarinelk.homelinux.net", "time": "Wed Jan 07 16:37:34 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Jan 07 16:37:34 2009 +0100" }, "message": "hwmon: (lm70) Add TI TMP121 support\n\nThe Texas Instruments TMP121 is a SPI temperature sensor very similar\nto the LM70, with slightly higher resolution. This patch extends the\nLM70 driver to support the TMP121. The TMP123 differs in pin assign-\nment.\n\nSigned-off-by: Manuel Lauss \u003cmano@roarinelk.homelinux.net\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "0589c2de643ef71a684ba6d219532f9e2a3e554b", "tree": "b07a373b838bf186f90b58b78ebaf918cd03df73", "parents": [ "97950c3d423e474ef887749b238ee67731b532fe" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Wed Jan 07 16:37:33 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Jan 07 16:37:33 2009 +0100" }, "message": "hwmon: Deprecate the fscher and fscpos drivers\n\nNow that the new merged fschmd driver has gained support for the watchdog\nintegrated into these IC\u0027s, there is no more reason to keep the old fscher\nand fscpos drivers around, so mark them as deprecated.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "97950c3d423e474ef887749b238ee67731b532fe", "tree": "0ce2a267c13d06f1d6514c1f67a8418dc82fa753", "parents": [ "453e308d773979f6bbdf4109df27101072f6524b" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Wed Jan 07 16:37:33 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Jan 07 16:37:33 2009 +0100" }, "message": "hwmon: (fschmd) Add watchdog support\n\nThis patch adds support for the watchdog part found in _all_ supported FSC\nsensor chips.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "b4da93e4b0ffc261c3530fe938aefd52854aa84c", "tree": "2cc727f3d7050187bf4e83f1eee8136d1296f8b8", "parents": [ "3aed198c35567e5a721f52c0bde23167867e6af6" ], "author": { "name": "Jean-Marc Spaggiari", "email": "jean-marc@spaggiari.org", "time": "Wed Jan 07 16:37:32 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Jan 07 16:37:32 2009 +0100" }, "message": "hwmon: (it87) Add support for the ITE IT8720F\n\nAllow it87.c to handle IT8720 chipset like IT8718 in order to\nretrieve voltage, temperatures and fans speed from sensors\ntools. Also updating the related documentation.\n\nSigned-off-by: Jean-Marc Spaggiari \u003cjean-marc@spaggiari.org\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "6e34b187bc216fc632769fb8b906d3a29ccd8f14", "tree": "b0b05a1019c1ca884261e22c647416c6e82c4b06", "parents": [ "2f650631b3710622666367474b5475ff81ba486e" ], "author": { "name": "Ira Snyder", "email": "iws@ovro.caltech.edu", "time": "Wed Jan 07 16:37:32 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Jan 07 16:37:32 2009 +0100" }, "message": "hwmon: Add LTC4245 driver\n\nAdd Linux support for the Linear Technology LTC4245 Multiple Supply Hot\nSwap controller I2C monitoring interface.\n\nSigned-off-by: Ira W. Snyder \u003ciws@ovro.caltech.edu\u003e\nAcked-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "3b02d332b6f15cc8f7b6a04757c86034669600e0", "tree": "1f451911fe0d7a5db461a7491b26439cae1e1aa0", "parents": [ "30453018655a3acd5f59e793da55a2f969ed9c32" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Wed Jan 07 16:37:31 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Jan 07 16:37:31 2009 +0100" }, "message": "hwmon: (f71882fg) Add documentation\n\nAdd some documentation about the f71882fg driver, and update the Kconfig\ndocumentation to report the new supported models.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "c0b4e3ab0c769913438aeb078535ff117eeba5fb", "tree": "aef089b13f7850971025851dedd958f10bdf928a", "parents": [ "455fbdd376c3ed3a5be8c039348896fdd87e9930" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Wed Nov 12 13:27:03 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Nov 12 17:17:17 2008 -0800" }, "message": "adt7462: new hwmon driver\n\nNew driver to play with. As Jean mentioned a couple of years ago, this\nchip is a beast with odd combinations of 8 fans, 4 temperatures, and 13\nvoltage sensors. This driver has been tested on an IntelliStation Z30.\n\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "455fbdd376c3ed3a5be8c039348896fdd87e9930", "tree": "03ac3947914b66061d4b8c20ae58285efe475f36", "parents": [ "33c5d3d64589c5d379db5a5615735f6d08438369" ], "author": { "name": "Pavel Machek", "email": "pavel@suse.cz", "time": "Wed Nov 12 13:27:02 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Nov 12 17:17:17 2008 -0800" }, "message": "LIS3LV02Dx Accelerometer driver\n\nThis adds a driver to the accelerometer sensor found in several HP\nlaptops (under the commercial names of \"HP Mobile Data Protection System\n3D\" and \"HP 3D driveguard\"). It tries to have more or less the same\ninterfaces as the hdaps and other accelerometer drivers: in sysfs and as\na joystick.\n\nThis driver was first written by Yan Burman. Eric Piel has updated it\nand slimed it up (including the removal of an interface to access to the\nfree-fall feature of the sensor because it is not reliable enough for\nnow). Pavel Machek removed few more features and switched locking from\nsemaphore to mutex.\n\nSeveral people have contributed to the database of the axes.\n\n[eric.piel@tremplin-utc.net: LIS3LV02D: Conform to the new ACPI API]\nSigned-off-by: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nSigned-off-by: Yan Burman \u003cburman.yan@gmail.com\u003e\nSigned-off-by: Pavel Machek \u003cpavel@suse.cz\u003e\nCc: \"Mark M. Hoffman\" \u003cmhoffman@lightlink.com\u003e\nSigned-off-by: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "271dabf5bbf6ae6e2792cd5cf6f0434230e5c18c", "tree": "654915a99671b90924bf34e1ddaa4cb0bb600290", "parents": [ "9d4d3834229e9949c066c2d0f73ed5d4b4965761" ], "author": { "name": "Ben Hutchings", "email": "bhutchings@solarflare.com", "time": "Fri Oct 17 17:51:11 2008 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@mahadeva.delvare", "time": "Fri Oct 17 17:51:11 2008 +0200" }, "message": "hwmon: (lm90) Support MAX6646, MAX6647 and MAX6649\n\nThese Maxim chips are similar to MAX6657 but use unsigned temperature\nvalues to allow for readings up to 145 degrees.\n\nSigned-off-by: Ben Hutchings \u003cbhutchings@solarflare.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "23b2d4778ad33ee6bfe60439fb73c16580f204f2", "tree": "9122f72ca2c06558b6e1f176e277393c85dda52d", "parents": [ "cea50fe2fdea36174aa24b58c69c4eb9770e7c49" ], "author": { "name": "Nate Case", "email": "ncase@xes-inc.com", "time": "Fri Oct 17 17:51:10 2008 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@mahadeva.delvare", "time": "Fri Oct 17 17:51:10 2008 +0200" }, "message": "hwmon: (lm90) Support ADT7461 in extended mode\n\nSupport ADT7461 in extended temperature range mode, which will change\nthe range of readings from 0..127 to -64..191 degC. Adjust the\nregister conversion functions accordingly.\n\nSigned-off-by: Nate Case \u003cncase@xes-inc.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nTested-by: Martyn Welch \u003cmartyn.welch@gefanuc.com\u003e\n" }, { "commit": "56c5d900dbb8e042bfad035d18433476931d8f93", "tree": "00b793965beeef10db03e0ff021d2d965c410759", "parents": [ "4dd95b63ae25c5cad6986829b5e8788e9faa0330", "ead9d23d803ea3a73766c3cb27bf7563ac8d7266" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Oct 11 12:39:35 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Oct 11 12:39:35 2008 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6\n\nConflicts:\n\n\tsound/core/memalloc.c\n" }, { "commit": "55b951e7e6b9f983286c40925e340124d79bb0f7", "tree": "bf1169122419010c2d5ea1d6187e0fbcd280456d", "parents": [ "dd89ccb23a718a25dd989a27b04bf52871c9fb23" ], "author": { "name": "Eric Miao", "email": "eric.miao@marvell.com", "time": "Fri Aug 29 04:26:48 2008 +0800" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Tue Sep 23 22:04:32 2008 +0100" }, "message": "hwmon: add max1111 Low-power Multichannel Serial 8-bit ADCs\n\nDriver based on corgi_ssp.c and sharpsl_pm.c, previously done by Richard\nPurdie and many others.\n\nNow changed to generic HWMON device and expose all the ADC input value\nthrough sysfs.\n\nSigned-off-by: Eric Miao \u003ceric.miao@marvell.com\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "e04180882faf69e896a8131ff3137788dd08b8d3", "tree": "c625282ce7d3be6ba561f9bf8c80badd5f3bf99d", "parents": [ "8394b3a84bf3e4665da4e535d34980aa6ba78969" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Aug 24 20:59:49 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Aug 24 20:59:49 2008 -0700" }, "message": "hwmon: Add Ultra45 workstation hwmon driver.\n\nThis is a PIC16F747 based controller that monitors and consolidates\nthe hardware access to various fan and temperature values reported by\nadr7462 and similar devices behind an I2C bus.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "d42139a3fbd9793cf3747287e8f5c1ae06e06942", "tree": "27b2400a6ed43fad83acc2e1a56873afa705976d", "parents": [ "16a515fd0cd3711a7da464d36009f18cd8e23f07" ], "author": { "name": "Marc Pignat", "email": "marc.pignat@hevs.ch", "time": "Fri Aug 15 00:40:34 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Aug 15 08:35:43 2008 -0700" }, "message": "hwmon: ADC124S501 generic driver\n\nSPI driver for analog to digital converters national semiconductor\nADC081S101, ADC124S501, ...\n\nCode for 8 channels by Tobias Himmer.\n\nThis driver adds support for National Semiconductor ADC\u003cbb\u003e\u003cc\u003eS\u003csss\u003e chip\nfamily, where:\n\n * bb is the resolution in number of bits (8, 10, 12)\n * c is the number of channels (1, 2, 4, 8)\n * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500\n kSPS and 101 for 1 MSPS)\n\n[akpm@linux-foundation.org: coding-style fixes]\nSigned-off-by: Marc Pignat \u003cmarc.pignat@hevs.ch\u003e\nCc: Tobias Himmer \u003ctobias@himmer-online.de\u003e\nCc: \"Mark M. Hoffman\" \u003cmhoffman@lightlink.com\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "6c633c3025c75f5fcf3a76d375faff34e3be021b", "tree": "0b9f8b6c8a14e74b5e9820a7b326a86df77939fd", "parents": [ "84f768c1633cfc547d82b9dc671ffea2f3785542" ], "author": { "name": "Sean MacLennan", "email": "seanm@seanm.ca", "time": "Wed Aug 06 22:41:05 2008 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@mahadeva.delvare", "time": "Wed Aug 06 22:41:05 2008 +0200" }, "message": "hwmon: ad7414 driver\n\nDriver for the Analog Devices AD7414 temperature monitoring chip.\n\nSigned-off-by: Sean MacLennan \u003csmaclennan@pikatech.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "68f823de3f1916cc0694376330c08377706b877d", "tree": "bcf181d425eb31e5ae1957ef92a8267081d993db", "parents": [ "2f8ea97a45e9db382787dd7afa7f500ee661aa7b" ], "author": { "name": "Grant Coady", "email": "gcoady.lk@gmail.com", "time": "Wed Aug 06 22:41:05 2008 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@mahadeva.delvare", "time": "Wed Aug 06 22:41:05 2008 +0200" }, "message": "hwmon: (adm9240) Remove EXPERIMENTAL dependency\n\nThe adm9240 driver is in the kernel for three years now, time to\nremove the EXPERIMENTAL dependency.\n\nSigned-off-by: Grant Coady \u003cgcoady.lk@gmail.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "549edb83327f2a5027a22d65b10603b01dc40175", "tree": "f30b17f061ad28f132c9e11eb4a4d079d1cf6a5e", "parents": [ "55d68d75ab00e60953f8784af5927b60967a297f" ], "author": { "name": "Juerg Haefliger", "email": "juergh@gmail.com", "time": "Wed Aug 06 22:41:03 2008 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@mahadeva.delvare", "time": "Wed Aug 06 22:41:03 2008 +0200" }, "message": "hwmon: (dme1737) Add support for the SMSC SCH5027\n\nAdd support for the SCH5027. The differences to the DME1737 are:\n- No support for programmable temp offsets\n- In auto mode, PWM outputs stay on min value if temp goes below low threshold\n and can\u0027t be programmed to fully turn off\n- Different voltage scaling\n- No VID input\n\nSigned-off-by: Juerg Haefliger \u003cjuergh@gmail.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "9ebd3d822efeca2e73565516a80373c76ce3fa12", "tree": "35947ad745ced49a5bfcd5dc1337ad0a4935d829", "parents": [ "01a52397e95a8532c59506691759dba9262d6be7" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Sat May 03 19:33:15 2008 -0700" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Jul 31 23:44:02 2008 -0400" }, "message": "hwmon: (lm75) add new-style driver binding\n\nMore LM75 updates:\n\n - Teach the LM75 driver to use new-style driver binding:\n\n * Create a second driver struct, using new-style driver binding\n methods cribbed from the legacy code.\n\n * Add a MODULE_DEVICE_TABLE (for \"newER-style binding\")\n\n * The legacy probe logic delegates its work to this new code.\n\n * The legacy driver now uses the name \"lm75_legacy\".\n\n - More careful initialization. Chips are put into 9-bit mode so\n the current interconversion routines will never fail.\n\n - Save the original chip configuration, and restore it on exit.\n (Among other things, this normally turns off the mode where\n the chip is constantly sampling ... and thus saves power.)\n\nSo the new-style code should catch all chips that boards declare,\nwhile the legacy code catches others. This particular coexistence\nstrategy may need some work yet ... legacy modes might best be set\nup explicitly by some tool not unlike \"sensors-detect\". (Or else\ncompletely eradicated...)\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "01a52397e95a8532c59506691759dba9262d6be7", "tree": "8429252add519af666178398de7cdfaef500402f", "parents": [ "321c4138573da888ca30a387e9973f690c217e9e" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Mon Apr 21 12:10:53 2008 -0700" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Jul 31 23:44:02 2008 -0400" }, "message": "hwmon: (lm75) cleanup/reorg\n\nMinor cleanup and reorg of the lm75 code.\n\n - Kconfig provides a larger list of lm75-compatible chips\n\n - A top comment now says what the driver does (!) ... as in, just\n what sort of sensor is this??\n\n - Section comments now delineate the various sections of the driver:\n hwmon attributes, driver binding, register access, module glue.\n One driver binding function moved out of the attribute section,\n as did the driver struct itself.\n\n - Minor tweaks to legacy probe logic: correct a comment, and\n remove a pointless variable.\n\n - Whitespace, linelength, and comment fixes.\n\nThis patch should include no functional changes. It\u0027s preparation\nfor adding new-style (driver model) I2C driver binding.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Laurent Pinchart \u003claurentp@cse-semaphore.com\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "8808a793f052c0a67426a24b961402fa20e92814", "tree": "8ee7a898dee93e95545d4b6f39628e3c52a2e0a1", "parents": [ "b8fdaf5a05adbf80e5a943bb3f65b46b5fb9b488" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Fri May 23 13:04:25 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat May 24 09:56:08 2008 -0700" }, "message": "ibmaem: new driver for power/energy/temp meters in IBM System X hardware\n\nThis driver reads IBM Active Energy Manager energy/temperature/power\nsensors on IBM System X hardware.\n\n[akpm@linux-foundation.org: fix printk warnings]\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nCc: \"Mark M. Hoffman\" \u003cmhoffman@lightlink.com\u003e\nCc: Corey Minyard \u003cminyard@acm.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "3d960a99ab1dcf6f395b883c5cca01c2dc150451", "tree": "add1b7b92a6c060d56d403266beef8ccbc11d3ed", "parents": [ "df9cb0339f2c213bea5480464fa669ed4add7445" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Wed Mar 19 17:00:48 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Mar 19 18:53:35 2008 -0700" }, "message": "ibmpex: update Kconfig to list more supported models\n\nEnhanced the list of supported machines.\n\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nCc: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "57df46d6d9ccd6ced95f169020f79ae637423087", "tree": "7ca14cba0e78cc8f35094e7cc9a8cbd7a715af19", "parents": [ "ae770152c801f10a91e5e86597a39b5f9ccf2d0d" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Mon Feb 18 13:33:23 2008 -0800" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Mon Feb 18 21:51:29 2008 -0500" }, "message": "hwmon: New driver for Analog Devices ADT7473 sensor chip\n\nThis driver reports voltage, temperature and fan sensor readings\non an ADT7473 chip.\n\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "5812f9283e621370a2d65282b7bcc942bf2c3f1c", "tree": "ac5f50f1baa812b6457439a57d8c0801ccab3402", "parents": [ "360f9452def0be1d6e29cee07a0f0640cd1d7b22" ], "author": { "name": "Steve Hardy", "email": "steve@linuxrealtime.co.uk", "time": "Tue Jan 22 23:00:02 2008 +0000" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:44 2008 -0500" }, "message": "hwmon: Add support for Texas Instruments/Burr-Brown ADS7828\n\nSigned-off-by: Steve Hardy \u003csteve@linuxrealtime.co.uk\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "05663368d2138c14fa1b9aa8eeca4ca9a33d7c77", "tree": "63d2ec28352f62273dafc812e90e870b8a331143", "parents": [ "5b34dbcd88251508d02e48ad9b0f9b8232a13ee0" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Nov 30 23:51:24 2007 +0100" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:43 2008 -0500" }, "message": "hwmon: (w83781d) Drop W83627HF support\n\nThe W83627HF hardware monitoring features are supported by the\nw83627hf driver for several years now. Support by the w83781d has\nbeen advertised as deprecated 6 months ago, it\u0027s about time to see\nit go.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "c7fa373796ea685874ca9525eeb3d0d0951e511b", "tree": "c0079be25686be32ee1d99193c41edb4e19ad37c", "parents": [ "85f03bccd6e0e2ac6ccf017d4bcd5d74bb87a671" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Oct 09 15:22:22 2007 +0200" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:40 2008 -0500" }, "message": "hwmon: (lm87) Add support for the Analog Devices ADM1024\n\nIt happens that the Analog Devices ADM1024 is fully compatible with\nthe National Semiconductor LM87, so support for the former can easily\nbe added to the lm87 driver.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "85f03bccd6e0e2ac6ccf017d4bcd5d74bb87a671", "tree": "2e71c1f5edbbb9e78237da39f208514656c873a1", "parents": [ "ce9c2f449b9e6b68d3a71ba146d64c44c8945d8d" ], "author": { "name": "Kevin Lo", "email": "kevlo@kevlo.org", "time": "Fri Nov 23 09:31:52 2007 +0800" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Feb 07 20:39:40 2008 -0500" }, "message": "hwmon: Add support for Winbond W83L786NG/NR\n\nSigned-off-by: Kevin Lo \u003ckevlo@kevlo.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "298c752491f5bd8f6b04dd7fc40b53da4e86e093", "tree": "be1be251adca01b0d3f0de3b82a6622a7cef70d5", "parents": [ "19e4f3a616ce1753a21b1125fd1923ea6273cd0d" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Thu Oct 18 13:22:43 2007 -0700" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Nov 08 08:42:46 2007 -0500" }, "message": "hwmon: (i5k_amb) New memory temperature sensor driver\n\nNew driver to read FB-DIMM temperature sensors on systems with the\nIntel 5000 series chipsets.\n\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" }, { "commit": "f2e1d89f9b349b3cd914b7c6ec6368632f4ad048", "tree": "5b0042924a9f9c8b3309c0be880f51795916fc28", "parents": [ "85ffdd28be04c324349dfc7c9de3d4342c885c3f", "82ba56c273911f7eda79849cfa0fc2d2e5a3b75b" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Oct 15 13:41:39 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Oct 15 13:41:39 2007 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)\n Input: use full RCU API\n Input: remove tsdev interface\n Input: add support for Blackfin BF54x Keypad controller\n Input: appletouch - another fix for idle reset logic\n HWMON: hdaps - switch to using input-polldev\n Input: add support for SEGA Dreamcast keyboard\n Input: omap-keyboard - don\u0027t pretend we support changing keymap\n Input: lifebook - fix X and Y axis range\n Input: usbtouchscreen - add support for GeneralTouch devices\n Input: fix open count handling in input interfaces\n Input: keyboard - add CapsShift lock\n Input: adbhid - produce all CapsLock key events\n Input: ALPS - add signature for ThinkPad R61\n Input: jornada720_kbd - send MSC_SCAN events\n Input: add support for the HP Jornada 7xx (710/720/728) touchscreen\n Input: add support for HP Jornada 7xx onboard keyboard\n Input: add support for HP Jornada onboard keyboard (HP6XX)\n Input: ucb1400_ts - use schedule_timeout_uninterruptible\n Input: xpad - fix dependancy on LEDS class\n Input: auto-select INPUT for MAC_EMUMOUSEBTN option\n ...\n\nResolved conflicts manually in drivers/hwmon/applesmc.c: converting from\na class device to a device and converting to use input-polldev created a\nfew apparently trivial clashes..\n" }, { "commit": "aefca8ba5f1b95431e33a52736bab128fc4f80d4", "tree": "88a84cd919e8431387ea55aba7d8663853b0f9c6", "parents": [ "b981d8b3f5e008ff10d993be633ad00564fc22cd" ], "author": { "name": "Dmitry Torokhov", "email": "dtor@insightbb.com", "time": "Fri Oct 12 21:30:36 2007 -0400" }, "committer": { "name": "Dmitry Torokhov", "email": "dmitry.torokhov@gmail.com", "time": "Fri Oct 12 21:30:36 2007 -0400" }, "message": "HWMON: hdaps - switch to using input-polldev\n\nSwitch to using input-polldev skeleton instead of implementing polling loop\nby itself. This also fixes problem with trylock on a mutex in atomic\ncontext.\n\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\n" }, { "commit": "b981d8b3f5e008ff10d993be633ad00564fc22cd", "tree": "e292dc07b22308912cf6a58354a608b9e5e8e1fd", "parents": [ "b11d2127c4893a7315d1e16273bc8560049fa3ca", "2b9e0aae1d50e880c58d46788e5e3ebd89d75d62" ], "author": { "name": "Dmitry Torokhov", "email": "dmitry.torokhov@gmail.com", "time": "Fri Oct 12 21:27:47 2007 -0400" }, "committer": { "name": "Dmitry Torokhov", "email": "dmitry.torokhov@gmail.com", "time": "Fri Oct 12 21:27:47 2007 -0400" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6\n\nConflicts:\n\n\tdrivers/macintosh/adbhid.c\n" }, { "commit": "569ff1022662a88591b0a89ea316a3c44306d199", "tree": "a0420271733bae76afce1a13c8a3942a41607635", "parents": [ "4cfdbe7f6cfdc07c27ae8ac490cd3453440dd9d8" ], "author": { "name": "Hans de Goede", "email": "j.w.r.degoede@hhs.nl", "time": "Thu Oct 11 08:06:29 2007 -0400" }, "committer": { "name": "Mark M. Hoffman", "email": "mhoffman@lightlink.com", "time": "Thu Oct 11 08:11:24 2007 -0400" }, "message": "hwmon: Add new combined driver for FSC chips\n\nThis patch adds a new merged driver for FSC sensor chips, it merges the fscher\nand fscpos drivers and adds support for the FSC Scylla, Heracles and Heimdall\nchips.\n\nSigned-off-by: Hans de Goede \u003cj.w.r.degoede@hhs.nl\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Mark M. Hoffman \u003cmhoffman@lightlink.com\u003e\n" } ], "next": "e95c237d78c0dc8fc0ae1207cec87af7a37dd366" }