)]}' { "log": [ { "commit": "a453e0689a3ccf85c08cb89753d7685046248c5c", "tree": "a85542ee234e7b9fe4f6a4a1837d4a99139c7e73", "parents": [ "03a9a447d2dab755b22df79b5e205fdbb9b2c851" ], "author": { "name": "Krishna Kumar", "email": "krkumar2@in.ibm.com", "time": "Sun Aug 30 22:20:28 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Aug 30 22:20:28 2009 -0700" }, "message": "pkt_sched: Fix resource limiting in pfifo_fast\n\npfifo_fast_enqueue has this check:\n if (skb_queue_len(list) \u003c qdisc_dev(qdisc)-\u003etx_queue_len) {\n\nwhich allows each band to enqueue upto tx_queue_len skbs for a\ntotal of 3*tx_queue_len skbs. I am not sure if this was the\nintention of limiting in qdisc.\n\nPatch compiled and 32 simultaneous netperf testing ran fine. Also:\n# tc -s qdisc show dev eth2\nqdisc pfifo_fast 0: root bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1\n Sent 16835026752 bytes 373116 pkt (dropped 0, overlimits 0 requeues 25) \n rate 0bit 0pps backlog 0b 0p requeues 25 \n\nSigned-off-by: Krishna Kumar \u003ckrkumar2@in.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "03a9a447d2dab755b22df79b5e205fdbb9b2c851", "tree": "4a5b14d31df24e5d624304c93f89627d721a0143", "parents": [ "7b3d3e4fc685a7d7e0b4c207ce24dfbab5689eb0" ], "author": { "name": "Krishna Kumar", "email": "krkumar2@in.ibm.com", "time": "Sat Aug 29 20:21:36 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Aug 30 22:16:57 2009 -0700" }, "message": "net: convert remaining non-symbolic return values in dev_queue_xmit\n\nPatch compiled and 32 simultaneous netperf testing ran fine.\n\nSigned-off-by: Krishna Kumar \u003ckrkumar2@in.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "6ca8b990e07914a87fd1f6dfc5507f5e1c4572e2", "tree": "c2a41b12a0eb57399784dfa42d331f5bec09e6ab", "parents": [ "5de3fcab91b0e1809eec030355d15801daf25083" ], "author": { "name": "Oliver Hartkopp", "email": "oliver@hartkopp.net", "time": "Sat Aug 29 06:45:09 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Aug 30 22:13:18 2009 -0700" }, "message": "can: use correct NET_RX_ return values\n\nDropped skb\u0027s should be documented by an appropriate return value.\nUse the correct NET_RX_DROP and NET_RX_SUCCESS values for that reason.\n\nSigned-off-by: Oliver Hartkopp \u003coliver@hartkopp.net\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "b9caaabb995c6ff103e2457b9a36930b9699de7c", "tree": "5e2fd04c5eb07ae1373c5c64250056e902982fa8", "parents": [ "fc57e515a2c02599b00d252545521288dfc0158a", "7e7430908c3ccaf71f0851050c8ccaf9ecfb3b56" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Aug 30 21:30:39 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Aug 30 21:30:39 2009 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6\n" }, { "commit": "b3df9a514f3c2020952cff34bc5bc6694a31c00c", "tree": "9d71fb739f4f9a3ae381855a5dd9365b797e6b22", "parents": [ "ea00b8e2223170a842bee06e0f27754ccdf2a217" ], "author": { "name": "roel kluin", "email": "roel.kluin@gmail.com", "time": "Thu Aug 27 02:03:15 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 29 00:19:42 2009 -0700" }, "message": "tipc: fix test of bearer_priority range in tipc_register_media()\n\nFor the bearer_priority to be less than TIPC_MIN_LINK_PRI and greater than\nTIPC_MAX_LINK_PRI is logically impossible.\n\nSigned-off-by: Roel Kluin \u003croel.kluin@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "ea00b8e2223170a842bee06e0f27754ccdf2a217", "tree": "d167e267a05de6a1f422d805b0290047af313981", "parents": [ "4923576b8ac5bfd36ab2beb176aeb747aaab7e41" ], "author": { "name": "Alexey Dobriyan", "email": "adobriyan@gmail.com", "time": "Fri Aug 28 09:57:21 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 29 00:19:38 2009 -0700" }, "message": "can: switch to seq_file\n\ncreate_proc_read_entry() is going to be removed soon.\n\nSigned-off-by: Alexey Dobriyan \u003cadobriyan@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "9a7030b76ab3c2b23b1629c49b6df33fb5aed305", "tree": "4deccd774c78070f72fc851228d10bf7c36d5211", "parents": [ "fd3ae5e8fc5e947a9f151e80a65763a24b6368a9" ], "author": { "name": "John Dykstra", "email": "john.dykstra1@gmail.com", "time": "Wed Aug 19 09:47:41 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 29 00:19:25 2009 -0700" }, "message": "tcp: Remove redundant copy of MD5 authentication key\n\nRemove the copy of the MD5 authentication key from tcp_check_req().\nThis key has already been copied by tcp_v4_syn_recv_sock() or\ntcp_v6_syn_recv_sock().\n\nSigned-off-by: John Dykstra \u003cjohn.dykstra1@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "fd3ae5e8fc5e947a9f151e80a65763a24b6368a9", "tree": "2842160866656f5573aea96fc90893ad0f0d3a23", "parents": [ "31ce8c71a3bdab12debb5899b1f6dac13e54c71d" ], "author": { "name": "Krishna Kumar", "email": "krkumar2@in.ibm.com", "time": "Tue Aug 18 21:55:59 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 29 00:19:21 2009 -0700" }, "message": "Speed-up pfifo_fast lookup using a private bitmap\n\nMaintain a per-qdisc bitmap for pfifo_fast giving availability\nof skbs for each band. This allows faster lookup for a skb when\nthere are no high priority skbs. Also, it helps in (rare) cases\nwhen there are no skbs on the list, where an immediate lookup is\nfaster than iterating through the three bands.\n\nSigned-off-by: Krishna Kumar \u003ckrkumar2@in.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "31ce8c71a3bdab12debb5899b1f6dac13e54c71d", "tree": "1c1e02ec7b5953669b58c79c1f7d7d5b962f5c07", "parents": [ "078b0735881c7969aaf21469f3577831cddd9f8c" ], "author": { "name": "David Ward", "email": "david.ward@ll.mit.edu", "time": "Sat Aug 29 00:04:09 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 29 00:04:09 2009 -0700" }, "message": "ipv6: Update Neighbor Cache when IPv6 RA is received on a router\n\nWhen processing a received IPv6 Router Advertisement, the kernel\ncreates or updates an IPv6 Neighbor Cache entry for the sender --\nbut presently this does not occur if IPv6 forwarding is enabled\n(net.ipv6.conf.*.forwarding \u003d 1), or if IPv6 Router Advertisements\nare not accepted (net.ipv6.conf.*.accept_ra \u003d 0), because in these\ncases processing of the Router Advertisement has already halted.\n\nThis patch allows the Neighbor Cache to be updated in these cases,\nwhile still avoiding any modification to routes or link parameters.\n\nThis continues to satisfy RFC 4861, since any entry created in the\nNeighbor Cache as the result of a received Router Advertisement is\nstill placed in the STALE state.\n\nSigned-off-by: David Ward \u003cdavid.ward@ll.mit.edu\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "80a1096bac73ce6e98dbbce10cc00a154460bcbd", "tree": "d0c520d42e0e72bd2c1b86000a793ea4cf923c5a", "parents": [ "80b71b80df14d885f7e50e115c1348398f418759" ], "author": { "name": "Octavian Purdila", "email": "opurdila@ixiacom.com", "time": "Sat Aug 29 00:00:35 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 29 00:00:35 2009 -0700" }, "message": "tcp: fix premature termination of FIN_WAIT2 time-wait sockets\n\nThere is a race condition in the time-wait sockets code that can lead\nto premature termination of FIN_WAIT2 and, subsequently, to RST\ngeneration when the FIN,ACK from the peer finally arrives:\n\nTime TCP header\n0.000000 30755 \u003e http [SYN] Seq\u003d0 Win\u003d2920 Len\u003d0 MSS\u003d1460 TSV\u003d282912 TSER\u003d0\n0.000008 http \u003e 30755 aSYN, ACK] Seq\u003d0 Ack\u003d1 Win\u003d2896 Len\u003d0 MSS\u003d1460 TSV\u003d...\n0.136899 HEAD /1b.html?n1Lg\u003dv1 HTTP/1.0 [Packet size limited during capture]\n0.136934 HTTP/1.0 200 OK [Packet size limited during capture]\n0.136945 http \u003e 30755 [FIN, ACK] Seq\u003d187 Ack\u003d207 Win\u003d2690 Len\u003d0 TSV\u003d270521...\n0.136974 30755 \u003e http [ACK] Seq\u003d207 Ack\u003d187 Win\u003d2734 Len\u003d0 TSV\u003d283049 TSER\u003d...\n0.177983 30755 \u003e http [ACK] Seq\u003d207 Ack\u003d188 Win\u003d2733 Len\u003d0 TSV\u003d283089 TSER\u003d...\n0.238618 30755 \u003e http [FIN, ACK] Seq\u003d207 Ack\u003d188 Win\u003d2733 Len\u003d0 TSV\u003d283151...\n0.238625 http \u003e 30755 [RST] Seq\u003d188 Win\u003d0 Len\u003d0\n\nSay twdr-\u003eslot \u003d 1 and we are running inet_twdr_hangman and in this\ninstance inet_twdr_do_twkill_work returns 1. At that point we will\nmark slot 1 and schedule inet_twdr_twkill_work. We will also make\ntwdr-\u003eslot \u003d 2.\n\nNext, a connection is closed and tcp_time_wait(TCP_FIN_WAIT2, timeo)\nis called which will create a new FIN_WAIT2 time-wait socket and will\nplace it in the last to be reached slot, i.e. twdr-\u003eslot \u003d 1.\n\nAt this point say inet_twdr_twkill_work will run which will start\ndestroying the time-wait sockets in slot 1, including the just added\nTCP_FIN_WAIT2 one.\n\nTo avoid this issue we increment the slot only if all entries in the\nslot have been purged.\n\nThis change may delay the slots cleanup by a time-wait death row\nperiod but only if the worker thread didn\u0027t had the time to run/purge\nthe current slot in the next period (6 seconds with default sysctl\nsettings). However, on such a busy system even without this change we\nwould probably see delays...\n\nSigned-off-by: Octavian Purdila \u003copurdila@ixiacom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "80b71b80df14d885f7e50e115c1348398f418759", "tree": "f5b58c73d1b2ca7639a8e0513b6c68a992b05484", "parents": [ "8945a808f7d5efd21fa9fb6055d2dd7887bdd9d8" ], "author": { "name": "Jens Låås", "email": "jens.laas@its.uu.se", "time": "Fri Aug 28 23:57:15 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 28 23:57:15 2009 -0700" }, "message": "fib_trie: resize rework\n\nHere is rework and cleanup of the resize function.\n\nSome bugs we had. We were using -\u003eparent when we should use \nnode_parent(). Also we used -\u003eparent which is not assigned by\ninflate in inflate loop.\n\nAlso a fix to set thresholds to power 2 to fit halve \nand double strategy.\n\nmax_resize is renamed to max_work which better indicates\nit\u0027s function.\n\nReaching max_work is not an error, so warning is removed. \nmax_work only limits amount of work done per resize.\n(limits CPU-usage, outstanding memory etc).\n\nThe clean-up makes it relatively easy to add fixed sized \nroot-nodes if we would like to decrease the memory pressure\non routers with large routing tables and dynamic routing.\nIf we\u0027ll need that...\n\nIts been tested with 280k routes.\n\nWork done together with Robert Olsson.\n\nSigned-off-by: Jens Låås \u003cjens.laas@its.uu.se\u003e\nSigned-off-by: Robert Olsson \u003crobert.olsson@its.uu.se\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "8945a808f7d5efd21fa9fb6055d2dd7887bdd9d8", "tree": "9bf05fb41dec4987c19d51486f4f6ae98f211297", "parents": [ "30038fc61adfdab162b1966e34261f06eda67f02" ], "author": { "name": "Sascha Hlusiak", "email": "contact@saschahlusiak.de", "time": "Fri Aug 28 23:53:53 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 28 23:53:53 2009 -0700" }, "message": "sit: allow ip fragmentation when using nopmtudisc to fix package loss\n\nif tunnel parameters have frag_off set to IP_DF, pmtudisc on the ipv4 link\nwill be performed by deriving the mtu from the ipv4 link and setting the\nDF-Flag of the encapsulating IPv4 Header. If fragmentation is needed on the\nway, the IPv4 pmtu gets adjusted, the ipv6 package will be resent eventually,\nusing the new and lower mtu and everyone is happy.\n\nIf the frag_off parameter is unset, the mtu for the tunnel will be derived\nfrom the tunnel device or the ipv6 pmtu, which might be higher than the ipv4\npmtu. In that case we must allow the fragmentation of the IPv4 packet because\nthe IPv6 mtu wouldn\u0027t \u0027learn\u0027 from the adjusted IPv4 pmtu, resulting in\nfrequent icmp_frag_needed and package loss on the IPv6 layer.\n\nThis patch allows fragmentation when tunnel was created with parameter\nnopmtudisc, like in ipip/gre tunnels.\n\nSigned-off-by: Sascha Hlusiak \u003ccontact@saschahlusiak.de\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "30038fc61adfdab162b1966e34261f06eda67f02", "tree": "c9266e5d3c54c7a9a4b17bd68b28b24d629249b2", "parents": [ "df19a6267705456f463871ae2aabc44299909d2a" ], "author": { "name": "Eric Dumazet", "email": "eric.dumazet@gmail.com", "time": "Fri Aug 28 23:52:01 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 28 23:52:01 2009 -0700" }, "message": "net: ip_rt_send_redirect() optimization\n\nWhile doing some forwarding benchmarks, I noticed\nip_rt_send_redirect() is rather expensive, even if send_redirects is\nfalse for the device.\n\nFix is to avoid two atomic ops, we dont really need to take a\nreference on in_dev\n\nSigned-off-by: Eric Dumazet \u003ceric.dumazet@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "df19a6267705456f463871ae2aabc44299909d2a", "tree": "59654abf9eb5dc58c9f8773dde5738b5bcb18312", "parents": [ "5e9b2dbfcbc9b180a0064d8a473a4652ee99c9ad" ], "author": { "name": "Eric Dumazet", "email": "eric.dumazet@gmail.com", "time": "Fri Aug 28 23:48:54 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 28 23:48:54 2009 -0700" }, "message": "tcp: keepalive cleanups\n\nIntroduce keepalive_probes(tp) helper, and use it, like \nkeepalive_time_when(tp) and keepalive_intvl_when(tp)\n\nSigned-off-by: Eric Dumazet \u003ceric.dumazet@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "3d1427f87002735aa54c370558e0c2bacc61f31e", "tree": "576141105ca88d237294c495199b8667c81c8220", "parents": [ "2975315b79f4109523b3d43932f57ed8370b9da3" ], "author": { "name": "Eric Dumazet", "email": "eric.dumazet@gmail.com", "time": "Fri Aug 28 23:45:21 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 28 23:45:21 2009 -0700" }, "message": "ipv4: af_inet.c cleanups\n\nSigned-off-by: Eric Dumazet \u003ceric.dumazet@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "2975315b79f4109523b3d43932f57ed8370b9da3", "tree": "565280baecf0e9ed69be4149d130694fe622405f", "parents": [ "c3d2f52dd40b5b6c122329dac32dc0e0351f0598" ], "author": { "name": "Alexey Dobriyan", "email": "adobriyan@gmail.com", "time": "Fri Aug 28 23:34:43 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 28 23:41:43 2009 -0700" }, "message": "pktgen: use proc_create_data()\n\nIt looks like after rename device proc entry is unusable,\nbecause of no -\u003eread_proc or -\u003eproc_fops.\n\nAnd create_proc_entry() is deprecated.\n\nSigned-off-by: Alexey Dobriyan \u003cadobriyan@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c3d2f52dd40b5b6c122329dac32dc0e0351f0598", "tree": "35c21d1bd0e107934f20e72732a5a3a523b1fdbe", "parents": [ "63adc6fb8ac0dee0020d6ad73e0d44f4306e1e34" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Thu Aug 27 13:55:20 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 28 23:41:39 2009 -0700" }, "message": "pktgen: increase version\n\nIncrease module version, and cleanup module info.\n\nSigned-off-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "63adc6fb8ac0dee0020d6ad73e0d44f4306e1e34", "tree": "e4706a3e2c07e6ee37c915bd874af92f8f13285b", "parents": [ "64e8ff5ef2a798cae2e3bede75644173aae98e08" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Thu Aug 27 13:55:19 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 28 23:41:37 2009 -0700" }, "message": "pktgen: cleanup checkpatch warnings\n\nSigned-off-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "64e8ff5ef2a798cae2e3bede75644173aae98e08", "tree": "e139a7ceca9d0c859d6e1afdae13b710fb0654da", "parents": [ "2bc481cf433879f0e6cdd4d899fc21ee05dcea23" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Thu Aug 27 13:55:18 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 28 23:41:36 2009 -0700" }, "message": "pktgen: use common idle routine\n\nSimpler to have one place that spins and accounts for delays,\nthis will also make the last packet be detected faster for more\nrepeatable timing.\n\nSigned-off-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "2bc481cf433879f0e6cdd4d899fc21ee05dcea23", "tree": "5afcce7af1511f105699cc74cc9df1b96b471eac", "parents": [ "fd29cf72621071d1d5f9bae634a4505b05f0e58b" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Fri Aug 28 23:41:29 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 28 23:41:29 2009 -0700" }, "message": "pktgen: spin using hrtimer\n\nThis changes how the pktgen thread spins/waits between\npackets if delay is configured. It uses a high res timer to\nwait for time to arrive.\n\nSigned-off-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "fd29cf72621071d1d5f9bae634a4505b05f0e58b", "tree": "b5894ae4412740526255c1ac66edf4b85adc7712", "parents": [ "5c9d191c166233e723e632e79bcca2127a5fece9" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Thu Aug 27 13:55:16 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 28 23:32:12 2009 -0700" }, "message": "pktgen: convert to use ktime_t\n\nThe kernel ktime_t is a nice generic infrastructure for mananging\nhigh resolution times, as is done in pktgen.\n\nSigned-off-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5c9d191c166233e723e632e79bcca2127a5fece9", "tree": "425324ef55119bb7420b4ab199e0a0821a3f157b", "parents": [ "5b8db2f568c4ee2a436f0e1c1416153e2878f869" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Thu Aug 27 13:55:15 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 28 23:32:09 2009 -0700" }, "message": "pktgen: avoid calling gettimeofday\n\nIf not using delay then no need to update next_tx after\neach packet sent. This allows pktgen to send faster especially\non systems with slower clock sources.\n\nSigned-off-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5b8db2f568c4ee2a436f0e1c1416153e2878f869", "tree": "b662ccc7a3e599209dc2d2b2217cc80b8c66bd29", "parents": [ "e470757d6179eb8998881ac2706927d4d0cb0e54" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Thu Aug 27 13:55:14 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 28 23:32:07 2009 -0700" }, "message": "pktgen: reorganize transmit loop\n\nHandle standard (and non-standard) return values in a switch.\n\nSigned-off-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "e470757d6179eb8998881ac2706927d4d0cb0e54", "tree": "c330507799072717647df780169b01d83d7493f5", "parents": [ "7d7bb1cf0ea7434230b3e3de49c24ff68666a72e" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Thu Aug 27 13:55:13 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 28 23:32:04 2009 -0700" }, "message": "pktgen: use netdev_alloc_skb\n\nnetdev_alloc_skb is NUMA node aware.\nAlso, don\u0027t exhaust atomic emergency pool. Don\u0027t want pktgen\nto cause OOM behaviour.\n\nSigned-off-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "7d7bb1cf0ea7434230b3e3de49c24ff68666a72e", "tree": "d7bd35cdd36da505c005944e5c199b52f6d031d9", "parents": [ "3791decb5aa0202d2a2473d6cf4947d98e846c7a" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Thu Aug 27 13:55:12 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 28 23:32:00 2009 -0700" }, "message": "pktgen: cleanup clone count test\n\nThe if statement to test for \"should a new packet be used\"\ncan be simplified.\n\nSigned-off-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "3791decb5aa0202d2a2473d6cf4947d98e846c7a", "tree": "43fa8ce25c787bf31b9d37545f6f840bbc8f1670", "parents": [ "3bda06a3d7987bfeabb218ac2f17ce22c34f13b3" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Thu Aug 27 13:55:11 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 28 23:31:55 2009 -0700" }, "message": "pktgen: xmit logic reorganization\n\nDo some reorganization of transmit logic path:\n * move transmit queue full idle to separate routine\n * add a cpu_relax()\n * eliminate some of the uneeded goto\u0027s\n * if queue is still stopped, go back to main thread loop.\n * don\u0027t give up transmitting if quantum is exhausted (be greedy)\n\nSigned-off-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "3bda06a3d7987bfeabb218ac2f17ce22c34f13b3", "tree": "03c29b206fea9df7655ae153fad3f61916d80457", "parents": [ "65c5b786a37746302e225223c0d8b760d4c48a8b" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Thu Aug 27 13:55:10 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 28 23:31:53 2009 -0700" }, "message": "pktgen: stop_device cleanup\n\nAll the callers were freeing skb after stopping device.\nRemove unneeded forward decl.\n\nSigned-off-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "65c5b786a37746302e225223c0d8b760d4c48a8b", "tree": "9e8c222fdc6aebbd600522a7cfd79e9edaf917e7", "parents": [ "475ac1e4099a005e1307c416df19f2100b7a838d" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Thu Aug 27 13:55:09 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 28 23:31:51 2009 -0700" }, "message": "pktgen: mark read-only/mostly variables\n\nSigned-off-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "475ac1e4099a005e1307c416df19f2100b7a838d", "tree": "433b73676a18606fb871ef385d4423691f509f11", "parents": [ "648fda7404630ba85ce462ee1279e1bc027ad915" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Thu Aug 27 13:55:08 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 28 23:31:47 2009 -0700" }, "message": "pktgen: change inlining\n\nDon\u0027t force inlining where not needed. Gcc does better job\nof deciding to inline local functions.\n\nSigned-off-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "648fda7404630ba85ce462ee1279e1bc027ad915", "tree": "da7a3446f9369dc3a0c8c45bf1bfff7fdb3e57fd", "parents": [ "39aa81659353becbe4ee34d72cf79e02182e858a" ], "author": { "name": "Stephen Hemminger", "email": "shemminger@vyatta.com", "time": "Thu Aug 27 13:55:07 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 28 23:31:45 2009 -0700" }, "message": "pktgen: minor cleanup\n\nA couple of minor functions can be written more compactly.\n\nSigned-off-by: Stephen Hemminger \u003cshemminger@vyatta.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5bf6fcc2bbfb90d997f88c969f1ceee35d064a24", "tree": "d73447bb71015d4b82a2a6b9073bef2c09503488", "parents": [ "15db0b7fd872b0312033666d3a82e1214a227ec0" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Tue Aug 25 17:44:28 2009 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 28 14:40:46 2009 -0400" }, "message": "mac80211: Check pending scan request after having processed mgd work\n\nWhen the queued management work items are processed in\nieee80211_sta_work() an item could be removed. This could change the\nanybusy from true to false, so we better check whether we can start a\nnew scan only after having processed the pending work first.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "15db0b7fd872b0312033666d3a82e1214a227ec0", "tree": "0c853f69292d085fac68e0cf5098b484fde9d13c", "parents": [ "6bd5f5208fac04d00325b458355e4a4abda76595" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Aug 25 16:33:47 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 28 14:40:45 2009 -0400" }, "message": "mac80211: fix scan cancel on ifdown\n\nWhen an interface is taken down while a scan is\npending -- i.e. a scan request was accepted but\nnot yet acted upon due to other work being in\nprogress -- we currently do not properly cancel\nthat scan and end up getting stuck. Fix this by\ndoing better checks when an interface is taken\ndown.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "eadac6bf95e1945bb64e6f8f22d8509391645e2e", "tree": "c8657948ec7725f8c2c893dda51194c258fecf5e", "parents": [ "2aa7b01fe4f2d0978115bfd40364f52d86003606" ], "author": { "name": "Arnd Hannemann", "email": "hannemann@nets.rwth-aachen.de", "time": "Mon Aug 24 20:51:46 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 28 14:40:43 2009 -0400" }, "message": "mac80211: Fix output of minstrels rc_stats\n\nAn integer overflow in the minstrel debug code prevented the\nthroughput to be displayed correctly. This patch fixes that,\nby permutating operations like proposed by Pavel Roskin.\n\nSigned-off-by: Arnd Hannemann \u003channemann@nets.rwth-aachen.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "77a980dc6c4674fc7741d72b9775135669318d8d", "tree": "be8a359a42002eda0553c0fe046a4a7f0e62e3a8", "parents": [ "0448b5fc032ea76096eb3cfbe3196b3c01b08b86" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Aug 24 11:46:30 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 28 14:40:41 2009 -0400" }, "message": "mac80211: fix RX skb leaks\n\nIn mac80211\u0027s RX path some of the warnings that\nwarn about drivers passing invalid status values\nleak the skb, fix that by refactoring the code.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0448b5fc032ea76096eb3cfbe3196b3c01b08b86", "tree": "836e9171ce8592afb7322e955e5767ee2222eb10", "parents": [ "229a7ef7c2861f9ecb7e025f4bd4ea1167fbb0a7" ], "author": { "name": "Roel Kluin", "email": "roel.kluin@gmail.com", "time": "Sat Aug 22 21:15:49 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 28 14:40:41 2009 -0400" }, "message": "nl80211: jump to out_err upon unsupported iftype\n\nJump to out_err when the iftype is not supported.\n\nSigned-off-by: Roel Kluin \u003croel.kluin@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1c4e9ab3f1cc458306b3b910000371ba4f71c4d2", "tree": "9105bee016cefa3922b3941ef3d294aa6859bef4", "parents": [ "ea77f12f2cc0f31168f2e0259e65a22202ac4dc2" ], "author": { "name": "Arnd Hannemann", "email": "hannemann@nets.rwth-aachen.de", "time": "Fri Aug 21 16:11:30 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 28 14:40:34 2009 -0400" }, "message": "mac80211: Remove unnused throughput field from minstrel_rate.\n\nI noticed that the throughput field of the minstrel_rate struct is never used,\nso remove it.\n\nSigned-off-by: Arnd Hannemann \u003channemann@nets.rwth-aachen.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ea77f12f2cc0f31168f2e0259e65a22202ac4dc2", "tree": "8ac1288e1680ae2b6093b4fdca978a4ea86f7e21", "parents": [ "3d54d25515838543e56889aa7e48f40d00719368" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri Aug 21 14:44:45 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 28 14:40:34 2009 -0400" }, "message": "mac80211: remove tasklet enable/disable\n\nDue to the way the tasklets work in mac80211 there\u0027s\nno need to ever disable them.\n\nHowever, we need to clear the pending packets when\ntaking down the last interface because otherwise\nthe tx_pending_tasklet might be queued if the\ndriver mucks with the queues (which it shouldn\u0027t).\n\nI\u0027ve had a situation occasionally with ar9170 in\nwhich ksoftirq was using 100% CPU time because\na disabled tasklet was scheduled, and I think that\nwas due to ar9170 receiving a packet while the\ntasklet was disabled. That\u0027s strange and it really\nshould not do that for other reasons, but there\u0027s\nno need to waste that much CPU time over it, it\nshould just warn instead.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3d54d25515838543e56889aa7e48f40d00719368", "tree": "ac8e7ab50b5fa9e9be64885f86c99a0b6c71892c", "parents": [ "f7969969f416e593bcc7dc24abf3f9fd6c27136d" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri Aug 21 14:51:05 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 28 14:40:31 2009 -0400" }, "message": "cfg80211: clean up properly on interface type change\n\nWhen the interface type changes while connected, and the\ndriver does not require the interface to be down for a\ntype change, it is currently possible to get very strange\nresults unless the driver takes special care, which it\nshouldn\u0027t have to.\n\nTo fix this, take care to disconnect/leave IBSS when\nchanging the interface type -- even if the driver may fail\nthe call. Also process all events that may be pending to\navoid running into a situation where an event is reported\nbut only processed after the type has already changed,\nwhich would lead to missing events and warnings.\n\nA side effect of this is that you will have disconnected\nor left the IBSS even if the mode change ultimately fails,\nbut since the intention was to change it and thus leave or\ndisconnect, this is not a problem.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f7969969f416e593bcc7dc24abf3f9fd6c27136d", "tree": "4f4e2ef49d2afae82442ba273d7490938232f113", "parents": [ "3d832611d794b3d312d26a4b251ac5285206f90d" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri Aug 21 12:23:49 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 28 14:40:30 2009 -0400" }, "message": "cfg80211: make spurious warnings less likely, configurable\n\nBob reported that he got warnings in IBSS mode about\nthe ssid_len being zero on a joined event, but only\nwhen kmemcheck was enabled. This appears to be due\nto a race condition between drivers and userspace,\nwhen the driver reports joined but the user in the\nmeantime decided to leave the IBSS again, the warning\nwould trigger. This was made more likely by kmemcheck\ndelaying the code that does the check and sends the\nevent.\n\nSo first, make the warning trigger closer to the\ndriver, which means it\u0027s not locked, but since only\nthe warning depends on it that\u0027s ok.\n\nAnd secondly, users will not want to have spurious\nwarnings at all, so make those that are known to be\nracy in such a way configurable.\n\nReported-by: Bob Copeland \u003cme@bobcopeland.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "103bf9f7d35849bce52ad412e4da5063b0716969", "tree": "67712138dc332cc42f3cc69ab2db9dbb60b4b4e1", "parents": [ "b0a4e7d8a291de63f35b04464de9ab4a83d38a7c" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Aug 20 16:34:15 2009 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 28 14:40:29 2009 -0400" }, "message": "mac80211: remove ieee80211_rx namespace hack\n\nWith the libipw naming scheme change, it is no longer necessary for\nmac80211 to avoid the ieee80211_rx name clash.\n\nReported-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "01a0ac417ce9b4f1216a266f2fd454cffefc5aee", "tree": "3bc13cf46eebc77a44e65b16132d26f71b131f50", "parents": [ "40ba60ddfeff8ef42fb33c0bdacfbb5f83e96b32" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Aug 20 21:36:16 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 28 14:40:25 2009 -0400" }, "message": "cfg80211: check lost scans later, fix bug\n\nWhen we lose a scan, cfg80211 tries to clean up after\nthe driver. However, it currently does this too early,\nit does this in GOING_DOWN already instead of DOWN, so\nit may happen with mac80211. Besides fixing this, also\nmake it more robust by leaking the scan request so if\nthe driver later actually finishes the scan, it won\u0027t\ncrash. Also check in ___cfg80211_scan_done whether a\nscan request is still pending and exit if not.\n\nReported-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nTested-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "84f6a01ce05fa671f7745b6e041e698a2d1f1341", "tree": "9d27eb23cf2c310b572193cbef290b6b84eb0259", "parents": [ "5eb6ba83aa326e2f2cf9109d20df5d6a497b36bb" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Aug 20 20:02:20 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 28 14:40:25 2009 -0400" }, "message": "mac80211: fix configure_filter invocation after stop\n\nSince configure_filter can sleep now, any multicast\nconfiguration needed to be postponed to a work struct.\nThis, however, lead to a problem that we could queue\nthe work, stop the device and then afterwards invoke\nconfigure_filter which may lead to driver hangs and is\na bug. To fix this, we can just cancel the filter work\nsince it\u0027s unnecessary to do after stopping the hw.\n\nSince there are various places that call drv_stop, and\ntwo of them do very similar things, the code for them\ncan be put into a shared function at the same time.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nReported-by: Lennert Buytenhek \u003cbuytenh@wantstofly.org\u003e\nTested-by: Lennert Buytenhek \u003cbuytenh@marvell.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9e03fdfd05e733e1136d431973625b174029c5e6", "tree": "740b4076711c1e5c351a61a38755be3e6cd3c1eb", "parents": [ "90d6f92828a081a86cb4f9644b6eef6207855050" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Aug 20 09:21:45 2009 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 28 14:40:24 2009 -0400" }, "message": "mac80211: Update mesh config IE to 11s draft 3.02\n\nThe mesh config information element has changed significantly since draft 1.08\nThis patch brings it up to date.\n\nThanks to Sam Leffler and Rui Paulo for identifying this.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7e7430908c3ccaf71f0851050c8ccaf9ecfb3b56", "tree": "7a435dbbb39a1d6179e0b683cb510978bec0adb5", "parents": [ "2246b2f1b43f3fbd128e72b129dcbbd3202cc592" ], "author": { "name": "Gustavo F. Padovan", "email": "gustavo@las.ic.unicamp.br", "time": "Wed Aug 26 04:04:03 2009 -0300" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Wed Aug 26 00:12:20 2009 -0700" }, "message": "Bluetooth: Add support for L2CAP \u0027Send RRorRNR\u0027 action\n\nWhen called, \u0027Send RRorRNR\u0027 should send a RNR frame if local device is\nbusy or a RR frame otherwise.\n\nSigned-off-by: Gustavo F. Padovan \u003cgustavo@las.ic.unicamp.br\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "2246b2f1b43f3fbd128e72b129dcbbd3202cc592", "tree": "edfe82ab47829bb320c41c04289e2a01f23fba56", "parents": [ "ca42a613c92d131ff02d5714419d58c36c3459f3" ], "author": { "name": "Gustavo F. Padovan", "email": "gustavo@las.ic.unicamp.br", "time": "Wed Aug 26 04:04:02 2009 -0300" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Wed Aug 26 00:12:20 2009 -0700" }, "message": "Bluetooth: Handle L2CAP case when the remote receiver is busy\n\nImplement all issues related to RemoteBusy in the RECV state table.\n\nSigned-off-by: Gustavo F. Padovan \u003cgustavo@las.ic.unicamp.br\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "ca42a613c92d131ff02d5714419d58c36c3459f3", "tree": "b40e2f5855260ab5eafb6f15517ba327db489b0b", "parents": [ "cbe86b98a6aceefe943ada1471eb52fd9ac4c504" ], "author": { "name": "Gustavo F. Padovan", "email": "gustavo@las.ic.unicamp.br", "time": "Wed Aug 26 04:04:01 2009 -0300" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Wed Aug 26 00:12:20 2009 -0700" }, "message": "Bluetooth: Acknowledge L2CAP packets when receiving RR-frames (F-bit\u003d1)\n\nImplement the Recv ReqSeqAndFBit event when a RR frame with F bit set is\nreceived.\n\nSigned-off-by: Gustavo F. Padovan \u003cgustavo@las.ic.unicamp.br\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "cbe86b98a6aceefe943ada1471eb52fd9ac4c504", "tree": "c9210df351240686da735245e9036eeb5999110a", "parents": [ "7bee549e197c9c0e92b89857a409675c1d5e9dff" ], "author": { "name": "Randy Dunlap", "email": "randy.dunlap@oracle.com", "time": "Mon Aug 24 16:32:50 2009 -0700" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Mon Aug 24 16:34:35 2009 -0700" }, "message": "Bluetooth: Add missing selection of CONFIG_CRC16 for L2CAP layer\n\nFix net/bluetooth/l2cap.c build errors:\n\nl2cap.c:(.text+0x126035): undefined reference to `crc16\u0027\nl2cap.c:(.text+0x126323): undefined reference to `crc16\u0027\nl2cap.c:(.text+0x12668e): undefined reference to `crc16\u0027\nl2cap.c:(.text+0x12683b): undefined reference to `crc16\u0027\nl2cap.c:(.text+0x126956): undefined reference to `crc16\u0027\nnet/built-in.o:l2cap.c:(.text+0x129041): more undefined references to `crc16\u0027 follow\n\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "1b7bf4edca0fdbad70c44e139f4cfebd6759de81", "tree": "b1440de411b2785427e8935fa4e8ae4dfd71a27b", "parents": [ "e686219a64fee9be9ce438dc3f040cd71ddd168a" ], "author": { "name": "Gustavo F. Padovan", "email": "gustavo@las.ic.unicamp.br", "time": "Mon Aug 24 00:45:20 2009 -0300" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Mon Aug 24 01:05:05 2009 -0700" }, "message": "Bluetooth: Use proper *_unaligned_le{16,32} helpers for L2CAP\n\nSimplify more conversions to the right endian with the proper helpers.\n\nSigned-off-by: Gustavo F. Padovan \u003cgustavo@las.ic.unicamp.br\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "e686219a64fee9be9ce438dc3f040cd71ddd168a", "tree": "1b72117be85dc4dd5c4656e459043d2528069760", "parents": [ "9e726b17422bade75fba94e625cd35fd1353e682" ], "author": { "name": "Gustavo F. Padovan", "email": "gustavo@las.ic.unicamp.br", "time": "Mon Aug 24 00:45:19 2009 -0300" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Mon Aug 24 01:05:05 2009 -0700" }, "message": "Bluetooth: Add locking scheme to L2CAP timeout callbacks\n\nAvoid race conditions when accessing the L2CAP socket from within the\ntimeout handlers.\n\nSigned-off-by: Gustavo F. Padovan \u003cgustavo@las.ic.unicamp.br\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "940917226260d6e029f55742a34a7d7810983c75", "tree": "871af506fa09aa2717c6c27307838f43993dabaf", "parents": [ "9818f660f433b58e770cfeb2ee9566f7b42ca0ae", "929122cdd5d4c344e59f9b55f870a8fcf7aa0d27" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Aug 23 19:19:30 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Aug 23 19:19:30 2009 -0700" }, "message": "Merge branch \u0027for-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan\n" }, { "commit": "f2c449320d547bd5c281649eb1d99afb20765144", "tree": "c08124ad81cd651db262c789af3f9702cee306c6", "parents": [ "335776bd696a6bf95134baf8ad95847371e4d5f6" ], "author": { "name": "Andy Grover", "email": "andy.grover@oracle.com", "time": "Fri Aug 21 12:28:35 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Aug 23 19:13:14 2009 -0700" }, "message": "RDS: Add a debug message suggesting to load transport modules\n\nNow that RDS transports are no longer compiled-in to RDS core,\nthere is now the possibility that they will not be loaded. This\nadds a helpful suggestion when rds_bind() fails to find a transport.\n\nSigned-off-by: Andy Grover \u003candy.grover@oracle.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "335776bd696a6bf95134baf8ad95847371e4d5f6", "tree": "76393aa4683e02b87209981ae96ed44f9689a080", "parents": [ "40d866095df3bb70ded1813f4852cab445ef678b" ], "author": { "name": "Andy Grover", "email": "andy.grover@oracle.com", "time": "Fri Aug 21 12:28:34 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Aug 23 19:13:12 2009 -0700" }, "message": "RDS: Track transports via an array, not a list\n\nNow that transports can be loaded in arbitrary order,\nit is important for rds_trans_get_preferred() to look\nfor them in a particular order, instead of walking the list\nuntil it finds a transport that works for a given address.\nNow, each transport registers for a specific transport slot,\nand these are ordered so that preferred transports come first,\nand then if they are not loaded, other transports are queried.\n\nSigned-off-by: Andy Grover \u003candy.grover@oracle.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "40d866095df3bb70ded1813f4852cab445ef678b", "tree": "681862ddcfe3706eacbacae324c6762e1c1f628c", "parents": [ "616b757ae18fb8ec2dfe7ff9d3f589f82cb0eb9d" ], "author": { "name": "Andy Grover", "email": "andy.grover@oracle.com", "time": "Fri Aug 21 12:28:33 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Aug 23 19:13:09 2009 -0700" }, "message": "RDS: Modularize RDMA and TCP transports\n\nEnable the building of transports as modules.\n\nAlso, improve consistency of Kconfig messages in relation to other\nprotocols, and move build dependency on IB from the RDS core code\nto the rds_rdma module.\n\nSigned-off-by: Andy Grover \u003candy.grover@oracle.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "616b757ae18fb8ec2dfe7ff9d3f589f82cb0eb9d", "tree": "40841513a49c35061c1c131ebfed28ce9a69bb3b", "parents": [ "70041088e3b976627ba9a183b812f39ef8a9ba0e" ], "author": { "name": "Andy Grover", "email": "andy.grover@oracle.com", "time": "Fri Aug 21 12:28:32 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Aug 23 19:13:07 2009 -0700" }, "message": "RDS: Export symbols from core RDS\n\nNow that rdma and tcp transports will be modularized,\nwe need to export a number of functions so they can call them.\n\nSigned-off-by: Andy Grover \u003candy.grover@oracle.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "70041088e3b976627ba9a183b812f39ef8a9ba0e", "tree": "bad7b11763d7b02b185bd705fe5ed292397cbc7a", "parents": [ "7d6fd5e7e97a2188d56441e4e96494c21c5994a7" ], "author": { "name": "Andy Grover", "email": "andy.grover@oracle.com", "time": "Fri Aug 21 12:28:31 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Aug 23 19:13:02 2009 -0700" }, "message": "RDS: Add TCP transport to RDS\n\nThis code allows RDS to be tunneled over a TCP connection.\n\nRDMA operations are disabled when using TCP transport,\nbut this frees RDS from the IB/RDMA stack dependency, and allows\nit to be used with standard Ethernet adapters, or in a VM.\n\nSigned-off-by: Andy Grover \u003candy.grover@oracle.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "9e726b17422bade75fba94e625cd35fd1353e682", "tree": "af8cf616d9cbda12f51682dbb96e696f135be436", "parents": [ "ef54fd937fbd5ebaeb023818524565bd526a5f36" ], "author": { "name": "Luiz Augusto von Dentz", "email": "luiz.dentz@openbossa.org", "time": "Wed Jul 15 13:50:58 2009 -0300" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 15:05:58 2009 -0700" }, "message": "Bluetooth: Fix rejected connection not disconnecting ACL link\n\nWhen using DEFER_SETUP on a RFCOMM socket, a SABM frame triggers\nauthorization which when rejected send a DM response. This is fine\naccording to the RFCOMM spec:\n\n the responding implementation may replace the \"proper\" response\n on the Multiplexer Control channel with a DM frame, sent on the\n referenced DLCI to indicate that the DLCI is not open, and that\n the responder would not grant a request to open it later either.\n\nBut some stacks doesn\u0027t seems to cope with this leaving DLCI 0 open after\nreceiving DM frame.\n\nTo fix it properly a timer was introduced to rfcomm_session which is used\nto set a timeout when the last active DLC of a session is unlinked, this\nwill give the remote stack some time to reply with a proper DISC frame on\nDLCI 0 avoiding both sides sending DISC to each other on stacks that\nfollow the specification and taking care of those who don\u0027t by taking\ndown DLCI 0.\n\nSigned-off-by: Luiz Augusto von Dentz \u003cluiz.dentz@openbossa.org\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "ef54fd937fbd5ebaeb023818524565bd526a5f36", "tree": "c664288f00548b8c531ff44a0bc8c7f18542740e", "parents": [ "8f17154f1f70fcc6faa31ac82164fcf7f0599f38" ], "author": { "name": "Gustavo F. Padovan", "email": "gustavo@las.ic.unicamp.br", "time": "Thu Aug 20 22:26:04 2009 -0300" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 15:03:43 2009 -0700" }, "message": "Bluetooth: Full support for receiving L2CAP SREJ frames\n\nSupport for receiving of SREJ frames as specified by the state table.\n\nSigned-off-by: Gustavo F. Padovan \u003cgustavo@las.ic.unicamp.br\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "8f17154f1f70fcc6faa31ac82164fcf7f0599f38", "tree": "f210dae590f600720b974d367082c368d03eac86", "parents": [ "fcc203c30d72dde82692f6b761a80e5ca5fdd8fa" ], "author": { "name": "Gustavo F. Padovan", "email": "gustavo@las.ic.unicamp.br", "time": "Thu Aug 20 22:26:03 2009 -0300" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 15:01:25 2009 -0700" }, "message": "Bluetooth: Add support for L2CAP SREJ exception\n\nWhen L2CAP loses an I-frame we send a SREJ frame to the transmitter side\nrequesting the lost packet. This patch implement all Recv I-frame events\non SREJ_SENT state table except the ones that deal with SendRej (the REJ\nexception at receiver side is yet not implemented).\n\nSigned-off-by: Gustavo F. Padovan \u003cgustavo@las.ic.unicamp.br\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "fcc203c30d72dde82692f6b761a80e5ca5fdd8fa", "tree": "04eb154db3be85574efe74542f528efb39abf5bb", "parents": [ "6840ed0770d79b9bb0800e5e026a067040ef18f5" ], "author": { "name": "Gustavo F. Padovan", "email": "gustavo@las.ic.unicamp.br", "time": "Thu Aug 20 22:26:02 2009 -0300" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:59:49 2009 -0700" }, "message": "Bluetooth: Add support for FCS option to L2CAP\n\nImplement CRC16 check for L2CAP packets. FCS is used by Streaming Mode and\nEnhanced Retransmission Mode and is a extra check for the packet content.\n\nUsing CRC16 is the default, L2CAP won\u0027t use FCS only when both side send\na \"No FCS\" request.\n\nInitially based on a patch from Nathan Holstein \u003cnathan@lampreynetworks.com\u003e\n\nSigned-off-by: Gustavo F. Padovan \u003cgustavo@las.ic.unicamp.br\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "6840ed0770d79b9bb0800e5e026a067040ef18f5", "tree": "7904a7bfc6bb1e57f30139cac47676bf589db7b7", "parents": [ "e90bac061b17cd81bd0df30606c64f4543bf5ca0" ], "author": { "name": "Gustavo F. Padovan", "email": "gustavo@las.ic.unicamp.br", "time": "Thu Aug 20 22:26:01 2009 -0300" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:57:58 2009 -0700" }, "message": "Bluetooth: Enable Streaming Mode for L2CAP\n\nStreaming Mode is helpful for the Bluetooth streaming based profiles, such\nas A2DP. It doesn\u0027t have any error control or flow control.\n\nSigned-off-by: Gustavo F. Padovan \u003cgustavo@las.ic.unicamp.br\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "e90bac061b17cd81bd0df30606c64f4543bf5ca0", "tree": "3529111fa5ba07bdd8ed9627d10d623f77416ace", "parents": [ "30afb5b2aa83adf4f69e5090d48e1bb04b64c58a" ], "author": { "name": "Gustavo F. Padovan", "email": "gustavo@las.ic.unicamp.br", "time": "Thu Aug 20 22:26:00 2009 -0300" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:56:15 2009 -0700" }, "message": "Bluetooth: Add support for Retransmission and Monitor Timers\n\nL2CAP uses retransmission and monitor timers to inquiry the other side\nabout unacked I-frames. After sending each I-frame we (re)start the\nretransmission timer. If it expires, we start a monitor timer that send a\nS-frame with P bit set and wait for S-frame with F bit set. If monitor\ntimer expires, try again, at a maximum of L2CAP_DEFAULT_MAX_TX.\n\nSigned-off-by: Gustavo F. Padovan \u003cgustavo@las.ic.unicamp.br\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "30afb5b2aa83adf4f69e5090d48e1bb04b64c58a", "tree": "f47506c5f02b8e1d23123cadee49f518c928afa5", "parents": [ "c74e560cd0101455f1889515e1527e4c2e266113" ], "author": { "name": "Gustavo F. Padovan", "email": "gustavo@las.ic.unicamp.br", "time": "Thu Aug 20 22:25:59 2009 -0300" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:55:20 2009 -0700" }, "message": "Bluetooth: Initial support for retransmission of packets with REJ frames\n\nWhen receiving an I-frame with unexpected txSeq, receiver side start the\nrecovery procedure by sending a REJ S-frame to the transmitter side. So\nthe transmitter can re-send the lost I-frame.\n\nThis patch just adds a basic support for retransmission, it doesn\u0027t\nmean that ERTM now has full support for packet retransmission.\n\nSigned-off-by: Gustavo F. Padovan \u003cgustavo@las.ic.unicamp.br\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "c74e560cd0101455f1889515e1527e4c2e266113", "tree": "a828b646b60578c1e90580da0d92e5d1ee7e7981", "parents": [ "1c2acffb76d4bc5fd27c4ea55cc27ad8ead10f9a" ], "author": { "name": "Gustavo F. Padovan", "email": "gustavo@las.ic.unicamp.br", "time": "Thu Aug 20 22:25:58 2009 -0300" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:53:58 2009 -0700" }, "message": "Bluetooth: Add support for Segmentation and Reassembly of SDUs\n\nERTM should use Segmentation and Reassembly to break down a SDU in many\nPDUs on sending data to the other side.\n\nOn sending packets we queue all \u0027segments\u0027 until end of segmentation and\njust the add them to the queue for sending. On receiving we create a new\nSKB with the SDU reassembled.\n\nInitially based on a patch from Nathan Holstein \u003cnathan@lampreynetworks.com\u003e\n\nSigned-off-by: Gustavo F. Padovan \u003cgustavo@las.ic.unicamp.br\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "1c2acffb76d4bc5fd27c4ea55cc27ad8ead10f9a", "tree": "c196f2acec0fa0ace48483ec99a691b4230f53d2", "parents": [ "22121fc9152ca8f25a2d790860832ccb6a414c4d" ], "author": { "name": "Gustavo F. Padovan", "email": "gustavo@las.ic.unicamp.br", "time": "Thu Aug 20 22:25:57 2009 -0300" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:53:01 2009 -0700" }, "message": "Bluetooth: Add initial support for ERTM packets transfers\n\nThis patch adds support for ERTM transfers, without retransmission, with\ntxWindow up to 63 and with acknowledgement of packets received. Now the\npackets are queued before call l2cap_do_send(), so packets couldn\u0027t be\nsent at the time we call l2cap_sock_sendmsg(). They will be sent in\nan asynchronous way on later calls of l2cap_ertm_send(). Besides if an\nerror occurs on calling l2cap_do_send() we disconnect the channel.\n\nInitially based on a patch from Nathan Holstein \u003cnathan@lampreynetworks.com\u003e\n\nSigned-off-by: Gustavo F. Padovan \u003cgustavo@las.ic.unicamp.br\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "22121fc9152ca8f25a2d790860832ccb6a414c4d", "tree": "03fcc5bdbdae77838f9aff9ce0f6e43895fd36d7", "parents": [ "f2fcfcd670257236ebf2088bbdf26f6a8ef459fe" ], "author": { "name": "Gustavo F. Padovan", "email": "gustavo@las.ic.unicamp.br", "time": "Thu Jul 23 10:27:23 2009 -0300" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:50:07 2009 -0700" }, "message": "Bluetooth: Create separate l2cap_send_disconn_req() function\n\nThe code for sending a disconnect request was repeated several times\nwithin L2CAP source code. So move this into its own function.\n\nSigned-off-by: Gustavo F. Padovan \u003cgustavo@las.ic.unicamp.br\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "f2fcfcd670257236ebf2088bbdf26f6a8ef459fe", "tree": "5bc6061e3b684ae545b24e2919ab43b711e04c4d", "parents": [ "65c7c4918450f8c4545ccb02a9c7a3d77e073535" ], "author": { "name": "Gustavo F. Padovan", "email": "gustavo@las.ic.unicamp.br", "time": "Sat Jul 04 15:06:24 2009 -0300" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:50:07 2009 -0700" }, "message": "Bluetooth: Add configuration support for ERTM and Streaming mode\n\nAdd support to config_req and config_rsp to configure ERTM and Streaming\nmode. If the remote device specifies ERTM or Streaming mode, then the\nsame mode is proposed. Otherwise ERTM or Basic mode is used. And in case\nof a state 2 device, the remote device should propose the same mode. If\nnot, then the channel gets disconnected.\n\nSigned-off-by: Gustavo F. Padovan \u003cgustavo@las.ic.unicamp.br\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "65c7c4918450f8c4545ccb02a9c7a3d77e073535", "tree": "ceacb79cdf46b74bad8429dd06d32ba96f9c31f9", "parents": [ "c6b03cf986eab00e20d0dbc852b233bb83472138" ], "author": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat May 02 23:07:53 2009 -0700" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:50:07 2009 -0700" }, "message": "Bluetooth: Add L2CAP RFC option if ERTM is enabled\n\nWhen trying to establish a connection with Enhanced Retransmission mode\nenabled, the RFC option needs to be added to the configuration.\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "c6b03cf986eab00e20d0dbc852b233bb83472138", "tree": "94fe92aafca068e3eb1cd6f4c53a3c86801fe7e0", "parents": [ "44dd46de325c4d47abfd1361e5d84a548edb8e42" ], "author": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat May 02 22:31:10 2009 -0700" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:50:07 2009 -0700" }, "message": "Bluetooth: Allow setting of L2CAP ERTM via socket option\n\nTo enable Enhanced Retransmission mode it needs to be set via a socket\noption. A different mode can be set on a socket, but on listen() and\nconnect() the mode is checked and ERTM is only allowed if it is enabled\nvia the module parameter.\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "44dd46de325c4d47abfd1361e5d84a548edb8e42", "tree": "cd23feb79ecee0eed27abbd4078bfcc80896194c", "parents": [ "52d18347dfb61519aa0f58fe1759edd3ad8c4e36" ], "author": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat May 02 19:09:01 2009 -0700" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:50:07 2009 -0700" }, "message": "Bluetooth: Add module option to enable L2CAP ERTM support\n\nSince the Enhanced Retransmission mode for L2CAP is still under heavy\ndevelopment disable it by default and provide a module option to enable\nit manually for testing.\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "52d18347dfb61519aa0f58fe1759edd3ad8c4e36", "tree": "e704210e27846a7763853d3a15236809c00e3ef4", "parents": [ "a6a67efd7088702fdbbb780c5a3f8e1a74e77b63" ], "author": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:49:36 2009 -0700" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:49:36 2009 -0700" }, "message": "Bluetooth: Coding style cleanup from previous rfcomm_init bug fix\n\nThe rfcomm_init bug fix went into the kernel premature before it got fully\nreviewed and acknowledged by the Bluetooth maintainer. So fix up the coding\nstyle now.\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "a6a67efd7088702fdbbb780c5a3f8e1a74e77b63", "tree": "fe35247ef5806ed690df3581de877fb84faad42b", "parents": [ "5959809ded86e267c1a95fb44738a224c30d3434" ], "author": { "name": "Thomas Gleixner", "email": "tglx@linutronix.de", "time": "Sun Jul 26 08:18:19 2009 +0000" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:35:02 2009 -0700" }, "message": "Bluetooth: Convert hdev-\u003ereq_lock to a mutex\n\nhdev-\u003ereq_lock is used as mutex so make it a mutex.\n\nSigned-off-by: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "edad63886993d18ab800c49f6587a93432ef8b35", "tree": "3513335d25e260daed72ecc0bdf19b0fd8bdcac2", "parents": [ "9eba32b86d17ef87131fa0bce43c614904ab5781" ], "author": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:22:15 2009 -0700" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:22:15 2009 -0700" }, "message": "Bluetooth: Let HIDP grab the device reference for connections\n\nThe core exports the hci_conn_hold_device() and hci_conn_put_device()\nfunctions for device reference of connections. Use this to ensure that\nthe uevents from the parent are send after the child ones.\n\nBased on a report by Brian Rogers \u003cbrian@xyzw.org\u003e\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "9eba32b86d17ef87131fa0bce43c614904ab5781", "tree": "cd7e40a026475b7e4ddb8bdc944e75bc5a18c250", "parents": [ "364f63519d94442ed373ac7da79033c8282df46a" ], "author": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:19:26 2009 -0700" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:19:26 2009 -0700" }, "message": "Bluetooth: Add extra device reference counting for connections\n\nThe device model itself has no real usable reference counting at the\nmoment and this causes problems if parents are deleted before their\nchildren. The device model itself handles the memory details of this\ncorrectly, but the uevent order is not consistent. This causes various\nproblems for systems like HAL or even X.\n\nSo until device_put() does a proper cleanup, the device for Bluetooth\nconnection will be protected with an extra reference counting to ensure\nthe correct order of uevents when connections are terminated.\n\nThis is not an automatic feature. Higher Bluetooth layers like HIDP or\nBNEP should grab this new reference to ensure that their uevents are\nsend before the ones from the parent device.\n\nBased on a report by Brian Rogers \u003cbrian@xyzw.org\u003e\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "364f63519d94442ed373ac7da79033c8282df46a", "tree": "af17fa090f2525e562396dbb2916199635ca1197", "parents": [ "290ba200815fdecb4d40dc942499c4ea6d0c4624" ], "author": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:15:53 2009 -0700" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:15:53 2009 -0700" }, "message": "Bluetooth: Disconnect HIDRAW devices on disconnect\n\nCurrently the HID subsystem will create HIDRAW devices for the transport\ndriver, but it will not disconnect them. Until the HID subsytem gets\nfixed, ensure that HIDRAW and HIDDEV devices are disconnected when the\nBluetooth HID device gets removed.\n\nBased on a patch from Brian Rogers \u003cbrian@xyzw.org\u003e\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "981b1414d78a7a42cab48b97d4de54a62d61db88", "tree": "74e1189b045b3b9e84c23a6b8aa892265df8046d", "parents": [ "fd0b3ff707dc1f7837079044bd4eca7ed505f70d" ], "author": { "name": "Vikram Kandukuri", "email": "vkandukuri@atheros.com", "time": "Wed Jul 01 11:39:58 2009 +0530" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:12:17 2009 -0700" }, "message": "Bluetooth: Fix missing scheduling when VIRTUAL_CABLE_UNPLUG is received\n\nThere is a test case in PTS tool; PTS will send the VIRTUAL_CABLE_UNPLUG\ncommand to IUT. Then IUT should disconnect the channel and kill the HID\nsession when it receives the command. The VIRTUAL_CABLE_UNPLUG command\nis parsed by HID transport, but it is not scheduled to do so. Add a\ncall to hidp_schedule() to kill the session.\n\nSigned-off-by: Jothikumar Mothilal \u003cjothikumar.mothilal@atheros.com\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n" }, { "commit": "fd0b3ff707dc1f7837079044bd4eca7ed505f70d", "tree": "a6e37b21f98ae3a3413ab0829730ba908f8cc446", "parents": [ "f8f2109d4f6c525f893f6f2901ae62372e83245e" ], "author": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Tue Jun 16 00:01:49 2009 +0200" }, "committer": { "name": "Marcel Holtmann", "email": "marcel@holtmann.org", "time": "Sat Aug 22 14:11:46 2009 -0700" }, "message": "Bluetooth: Add proper shutdown support to SCO sockets\n\nThe SCO sockets for Bluetooth audio setup and streaming are missing the\nshutdown implementation. This hasn\u0027t been a problem so far, but with a\nmore deeper integration with PulseAudio it is important to shutdown SCO\nsockets properly.\n\nAlso the Headset profile 1.2 has more detailed qualification tests that\nrequire that SCO and RFCOMM channels are terminated in the right order. A\nproper shutdown function is necessary for this.\n\nBased on a report by Johan Hedberg \u003cjohan.hedberg@nokia.com\u003e\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\nTested-by: Johan Hedberg \u003cjohan.hedberg@nokia.com\u003e\n" }, { "commit": "f8f2109d4f6c525f893f6f2901ae62372e83245e", "tree": "e20b095973d45eb2360ffa157ad161536c2ddbe9", "parents": [ "bb81b2ddfa194b6d12761a350b5b5985cecae0a9", "a2c3f6567c9ac327f1ef1272551f3a7595ec885e" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 21 01:56:56 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 21 01:56:56 2009 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n" }, { "commit": "11ba964d4f936609a04e8b9f2051f6027ef761ae", "tree": "82bcec21fef9364e1fb27cb4091c7950eadcf7ad", "parents": [ "5904d2067680e9bb73a4816fa6b9eec49355c9c8" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Aug 19 19:45:50 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Aug 20 11:36:07 2009 -0400" }, "message": "mac80211: fix register_hw error path\n\n\"cfg80211: fix alignment problem in scan request\"\nintroduced a bug into the error path, because now\nwe allocate the entire scan request and not just\nthe channel list (the channel list is allocated\ntogether with the scan request) -- on errors we\nthus also need to free the entire scan request.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "16a832e785820aa199641c77b2d6f4a443d2ec46", "tree": "dbd843a2f054d0b826802d5f596f0581b3ea33d7", "parents": [ "30fab9e0aecf15ca79bb194bb603203f5e1fde66" ], "author": { "name": "Zhu Yi", "email": "yi.zhu@intel.com", "time": "Wed Aug 19 16:08:22 2009 +0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Aug 20 11:36:07 2009 -0400" }, "message": "cfg80211: allow cfg80211_connect_result with bssid \u003d\u003d NULL\n\nIn case of connection failure, the bssid info is not a must have.\n\nSigned-off-by: Zhu Yi \u003cyi.zhu@intel.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "415ad1efae1d5fe00d739e612d262eabda90f5e8", "tree": "285f400386932f691849b3c0114c322b64214a88", "parents": [ "eeef41854deae30ea304544f18684df70ae3f87b" ], "author": { "name": "David Kilroy", "email": "kilroyd@googlemail.com", "time": "Wed Aug 19 00:43:31 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Aug 20 11:36:06 2009 -0400" }, "message": "cfg80211: fix leaks of wdev-\u003econn-\u003eie\n\nThis only occurs in the following error situations:\n - driver calls connect_result with failure\n - error scheduling authentication on connect\n - error initiating scan (to get BSSID and channel) on\n connect\n - userspace calls disconnect while in the SCANNING or\n SCAN_AGAIN states\n\nSigned-off-by: David Kilroy \u003ckilroyd@googlemail.com\u003e\nReviewed-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ad002395fd230528281083f4be71855ed7e35b04", "tree": "c2bccce17ad69dcfb454fe3a38ba68f0f210b5b5", "parents": [ "21f8a73f829797eb7ebc12202b4c68e10e751ddb" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Aug 18 19:51:57 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Aug 20 11:36:05 2009 -0400" }, "message": "cfg80211: fix dangling scan request checking\n\nMy patch \"cfg80211: fix deadlock\" broke the code it\nwas supposed to fix, the scan request checking. But\nit\u0027s not trivial to put it back the way it was, since\nthe original patch had a deadlock.\n\nNow do it in a completely new way: queue the check\noff to a work struct, where we can freely lock. But\nthat has some more complications, like needing to\nwait for it to be done before the wiphy/rdev can be\ndestroyed, so some code is required to handle that.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c8a61a7d33350eeec668fc6230ad55f5fa93209b", "tree": "72978e2590de522d2c3fdad888590df4ac401dc0", "parents": [ "e5539bcbf64fdb16af73b5c8caff9255307490b5" ], "author": { "name": "Daniel Walker", "email": "dwalker@fifo99.com", "time": "Tue Aug 18 10:59:00 2009 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Aug 20 11:36:04 2009 -0400" }, "message": "mac80211: New stat counters for multicast and unicast forwarded frames\n\nThis expands on the current fwded_frames stat counter which should be equal to\nthe total of these two new counters. The new counters are called \"fwded_mcast\"\nand \"fwded_unicast\".\n\nSigned-off-by: Daniel Walker \u003cdwalker@fifo99.com\u003e\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "29508d122a5228c2a68d1e9a39251d3991b3cfef", "tree": "db2a2a8bf90e470397428be61a1404c10779defb", "parents": [ "608b88cb34b0e70a538ee1fc334cc833ef691836" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Aug 18 10:46:42 2009 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Aug 20 11:36:03 2009 -0400" }, "message": "rc80211_pid_algo.c: remove unused variable declaration\n\nCC [M] net/mac80211/rc80211_pid_algo.o\nnet/mac80211/rc80211_pid_algo.c: In function ‘rate_control_pid_rate_init’:\nnet/mac80211/rc80211_pid_algo.c:304: warning: unused variable ‘si’\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bfc32e6a9559d3e30925929cd9a9df7498f325db", "tree": "f0e5f1bdf902fe463fa994d44cafcab39b357380", "parents": [ "92ed48e5230e8f5906dda0cc31715b3b7e3fe303" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Mon Aug 17 17:15:55 2009 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Aug 20 11:36:02 2009 -0400" }, "message": "mac80211: Decouple fail_avg stats used by mesh from rate control algorithm.\n\nMesh uses the tx failure average to compute the (m)path metric. This used to\nbe done inside the rate control module. This patch breaks the dependency\nbetween the mesh stack and the rate control algorithm. Mesh will now work\nindependently of the chosen rate control algorithm.\n\nThe mesh stack keeps a moving average of the average transmission losses for\neach mesh peer station. If the fail average exceeds a certain threshold, the\npeer link is marked as broken.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f424afa17899408cbd267a4c4534ca6fc9d8f71c", "tree": "ef68af16e693231b6842767ecd2ad04ba341cd93", "parents": [ "3ac64beecd27400d12cc7afb4108eef26c499f6a" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Aug 17 16:18:07 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Aug 20 11:35:58 2009 -0400" }, "message": "mac80211: remove deprecated API\n\nAll but two drivers have now stopped using the two\ndeprecated members radio_enabled and beacon_int,\nso it\u0027s about time to remove them for good.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nAcked-by: Kalle Valo \u003ckalle.valo@iki.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3ac64beecd27400d12cc7afb4108eef26c499f6a", "tree": "da0220085f68e30fe61ba9b8833dc6311d6dc25e", "parents": [ "ea416a793d2b611f22b42ba094fd2e5bd30fff43" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Aug 17 16:16:53 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Aug 20 11:35:58 2009 -0400" }, "message": "mac80211: allow configure_filter callback to sleep\n\nOver time, a whole bunch of drivers have come up\nwith their own scheme to delay the configure_filter\noperation to a workqueue. To be able to simplify\nthings, allow configure_filter to sleep, and add\na new prepare_multicast callback that drivers that\nneed the multicast address list implement. This new\ncallback must be atomic, but most drivers either\ndon\u0027t care or just calculate a hash which can be\ndone atomically and then uploaded to the hardware\nnon-atomically.\n\nA cursory look suggests that at76c50x-usb, ar9170,\nmwl8k (which is actually very broken now), rt2x00,\nwl1251, wl1271 and zd1211 should make use of this\nnew capability.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ea416a793d2b611f22b42ba094fd2e5bd30fff43", "tree": "bfa379d79861a1b2b11f26810873dc7a4dc8f847", "parents": [ "86b2892a22a433e56e39e33bf353adc6cc4eabb2" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Aug 17 12:22:14 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Aug 20 11:35:57 2009 -0400" }, "message": "cfg80211: report userspace SME connected event properly\n\nInstead of hacking the event reporting into the\n__cfg80211_connect_result() function which is also\ninvoked by others, set up things correctly and then\ninvoke that function, so that it can do more sanity\nchecking.\n\nAlso, it is currently not possible to get a ROAMED\nevent from the userspace SME anyway since we send\nout a DISCONNECTED event when it disassociates and\nthen a new CONNECTED event on the next association.\n\nThanks to Zhu Yi for pointing out that the code is\nsomewhat convoluted and doesn\u0027t warn when it should.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0ff6ce7b36199f67f709c750e9a2a66659a4babe", "tree": "3b023b960e010b7ce84d35d8e9b516f5cb285f77", "parents": [ "96909e97716de1d86e6e24d6aabce09980372771" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Aug 17 12:25:37 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Aug 20 11:35:56 2009 -0400" }, "message": "cfg80211: fix deadlock\n\nWhen removing an interface with nl80211, cfg80211 will\ndeadlock in the netdev notifier because we\u0027re already\nholding rdev-\u003emtx and try to acquire it again to verify\nthe scan has been done.\n\nThis bug was introduced by my patch\n\"cfg80211: check for and abort dangling scan requests\".\n\nTo fix this, move the dangling scan request check into\nwiphy_unregister(). This will not be able to catch all\ncases right away, but if the scan problem happens with\na manual ifdown or so it will be possible to remedy it\nby removing the module/device.\n\nAdditionally, add comments about the deadlock scenario.\n\nReported-by: Christian Lamparter \u003cchunkeey@web.de\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nTested-by: Christian Lamparter \u003cchunkeey@web.de\u003e\nTested-by: Kalle Valo \u003ckalle.valo@iki.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a8b875e7dc80ff442698d8cf4f45ccce400a6a66", "tree": "f318ad20e441b902612e7d300eb8996d864eda8a", "parents": [ "7021f62a46d4866fecd7b31cbc359d742876bb61" ], "author": { "name": "Jussi Kivilinna", "email": "jussi.kivilinna@mbnet.fi", "time": "Thu Aug 13 20:39:31 2009 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Aug 20 11:33:09 2009 -0400" }, "message": "cfg80211: export cfg80211_wext_siwfreq\n\ncfg80211_wext_siwfreq() should be exported with EXPORT_SYMBOL_GPL.\n\nSigned-off-by: Jussi Kivilinna \u003cjussi.kivilinna@mbnet.fi\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "929122cdd5d4c344e59f9b55f870a8fcf7aa0d27", "tree": "3054330ee58125a69391790ffb4a53c3cba931b7", "parents": [ "16eea493da563b5a3356a77c6d8776dffc29d3b6" ], "author": { "name": "Dmitry Eremin-Solenikov", "email": "dbaryshkov@gmail.com", "time": "Fri Aug 14 20:00:20 2009 +0400" }, "committer": { "name": "Dmitry Eremin-Solenikov", "email": "dbaryshkov@gmail.com", "time": "Wed Aug 19 23:08:24 2009 +0400" }, "message": "Drop ARPHRD_IEEE802154_PHY\n\nThere are not maste devices in mac802154 anymore, so drop\nARPHRD_IEEE802154_PHY definition.\n\nSigned-off-by: Dmitry Eremin-Solenikov \u003cdbaryshkov@gmail.com\u003e\n" }, { "commit": "16eea493da563b5a3356a77c6d8776dffc29d3b6", "tree": "6a6444442b8d7789d4c2fcb8ba990453969121fc", "parents": [ "81f9510381ee43205564063f2e8650672b11d453" ], "author": { "name": "Dmitry Eremin-Solenikov", "email": "dbaryshkov@gmail.com", "time": "Wed Aug 19 19:32:24 2009 +0400" }, "committer": { "name": "Dmitry Eremin-Solenikov", "email": "dbaryshkov@gmail.com", "time": "Wed Aug 19 23:08:22 2009 +0400" }, "message": "ieee802154: add support for channel pages from IEEE 802.15.4-2006\n\nIEEE 802.15.4-2006 adds new concept: channel pages, which can contain several\nchannels. Add support for channel pages in the API and in the fakehard driver.\n\nSigned-off-by: Dmitry Eremin-Solenikov \u003cdbaryshkov@gmail.com\u003e\n" }, { "commit": "2bfb1070ba1fdb8cbc2b0b9ff61a3b0701ab40de", "tree": "72b91a81b05f74fb62eeb4b4e918c36fe57c8f26", "parents": [ "a0aea57786fe9c6b62b1a4f28409582520fa494f" ], "author": { "name": "Dmitry Eremin-Solenikov", "email": "dbaryshkov@gmail.com", "time": "Fri Aug 14 16:13:12 2009 +0400" }, "committer": { "name": "Dmitry Eremin-Solenikov", "email": "dbaryshkov@gmail.com", "time": "Wed Aug 19 23:08:20 2009 +0400" }, "message": "ieee802154: add a sysfs representation of WPAN master devices\n\nAdd a sysfs/in-kernel representation of LR-WPAN master devices.\n\nSigned-off-by: Dmitry Eremin-Solenikov \u003cdbaryshkov@gmail.com\u003e\n" }, { "commit": "ae6e2aef6c03ccb06c6baaa1b77cc0e0ae226faf", "tree": "d9f248ff8f0af50750831ac71b4e88fe1c2cb820", "parents": [ "3a5209e3b26386fd174820ee6e8e27479b24869a" ], "author": { "name": "Randy Dunlap", "email": "randy.dunlap@oracle.com", "time": "Mon Aug 17 10:35:49 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Aug 17 17:48:25 2009 -0700" }, "message": "phonet: fix build when PROC_FS is disabled\n\nFix phonet build when PROC_FS is not enabled:\n\nnet/built-in.o: In function `pn_sock_open\u0027:\nsocket.c:(.text+0x23c649): undefined reference to `seq_open_net\u0027\nnet/built-in.o:(.rodata+0x21018): undefined reference to `seq_release_net\u0027\n\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nAcked-by: Rémi Denis-Courmont \u003cremi.denis-courmont@nokia.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "1758c0947605211ef953cc91d6bbdf847a21b822", "tree": "695e60450ec85f7e48b00949c29324c89eca7f20", "parents": [ "49d4b8ba97034469b941d00d5ca1e3b897394e35" ], "author": { "name": "Oliver Hartkopp", "email": "oliver@hartkopp.net", "time": "Thu Aug 13 22:54:25 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 14 16:36:57 2009 -0700" }, "message": "can: Use WARN_ONCE() instead of BUG_ON() for sanity check in receive path\n\nTo ensure a proper handling of CAN frames transported in skbuffs some checks\nneed to be performed at receive time.\n\nAs stated by Michael Olbrich and Luotao Fu BUG_ON() might be to restrictive.\nThis is right as we can just drop the non conform skbuff and the Kernel can\ncontinue working.\n\nThis patch replaces the BUG_ON() with a WARN_ONCE() so that the system remains\nhealthy but we made the problem visible (once).\n\nSigned-off-by: Oliver Hartkopp \u003coliver@hartkopp.net\u003e\nSigned-off-by: Urs Thuermann \u003curs@isnogud.escape.de\u003e\nCC: Michael Olbrich \u003cm.olbrich@pengutronix.de\u003e\nCC: Luotao Fu \u003cl.fu@pengutronix.de\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "b85daa5324a3c9e560a4351c17d18f49c647eb5c", "tree": "0616b7adcb0b785560b4826a211517aeb84f03d3", "parents": [ "cf9911166113e471e1796eaf273982d8e43b138d" ], "author": { "name": "Vasu Dev", "email": "vasu.dev@intel.com", "time": "Fri Aug 14 12:41:07 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 14 16:12:06 2009 -0700" }, "message": "vlan: adds fcoe offload related net_device_ops and updates fcoe_ddp_xid field\n\nAdds fcoe offload related net_device_ops functions vlan_dev_fcoe_ddp_setup\nand vlan_dev_fcoe_ddp_done, their implementation simply calls real eth device\nnet_device_ops for FCoE DDP setup and done operations.\n\nUpdates VLAN netdev field value for fcoe_ddp_xid from real eth device netdev.\n\nAbove changes are required for fcoe DDP offload working on a VLAN interface.\n\nSigned-off-by: Vasu Dev \u003cvasu.dev@intel.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "cf9911166113e471e1796eaf273982d8e43b138d", "tree": "141ca87902690967620d6297c88746e2adb6dae5", "parents": [ "deeb16dc24b68cbdca72dc717ae82178a6644801", "88512935a24305fea7aecc9ba4d675869e97fc2a" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 14 16:07:21 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 14 16:07:21 2009 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n" }, { "commit": "a8519de4a030d130e0d18147a2af3112b7951e0b", "tree": "59f89418cf7f311d896c38ff774398e052b709d8", "parents": [ "5c16807d3d196203d2d3c9fae51ac7e422091904", "560ad81b6c90e0fddc4d6c280f16ddf18d47eeb1" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 14 12:29:17 2009 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 14 12:29:17 2009 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n" }, { "commit": "16cb9d42b68b339852e8914f2538ca9a2aec616c", "tree": "aef8822ae4d5dc7574af3c52501b8d6449c2ccc0", "parents": [ "36e6fea84905512ea776707e82b5b435220efc17" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Aug 12 23:33:20 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 14 09:14:08 2009 -0400" }, "message": "cfg80211: allow driver to override PS default\n\nSometimes drivers might have a good reason to override\nthe PS default, like iwlwifi right now where it affects\nRX performance significantly at this point. This will\nallow them to override the default, if desired, in a\nway that users can still change it according to their\ntrade-off choices, not the driver\u0027s, like would happen\nif the driver just disabled PS completely then.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "36e6fea84905512ea776707e82b5b435220efc17", "tree": "db588e7dbbfcf0fa47f4954344a03961e960c898", "parents": [ "70bdb6b275d789ddf05c3a858e6b57715539394b" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Aug 12 22:21:21 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 14 09:14:07 2009 -0400" }, "message": "cfg80211: check for and abort dangling scan requests\n\nIf you trigger a scan request on an interface and then\ntake it down, or rmmod the module or unplug the device\nthe driver might \"forget\" to cancel the scan request.\nThat is a bug in the driver, but the current behaviour\nis that we just hang endlessly waiting for the netdev\nrefcount to become 0 which it never will. To improve\nrobustness, check for this situation in cfg80211, warn\nabout it and clean up behind the driver. I don\u0027t just\nclean up silently because it\u0027s likely that the driver\nalso has some internal state it has now leaked.\n\nAdditionally, this fixes a locking bug, clearing the\nscan_req pointer should be done under the rdev lock.\n\nFinally, we also need to _wait_ for the scan work and\nnot just abort it since it might be pending and wanting\nto do a cleanup.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "70bdb6b275d789ddf05c3a858e6b57715539394b", "tree": "35667ac24fcbc9c6efc3ade446d8571d3c34a1fe", "parents": [ "57ef5ddb456649667438e023f67dd3a3ff3fbed8" ], "author": { "name": "David Woo", "email": "xinhua_wu@realsil.com.cn", "time": "Wed Aug 12 11:03:44 2009 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 14 09:14:06 2009 -0400" }, "message": "mac80211: Fix invalid length passed to IE parser for PLINK CONFIRM frames\n\nThe length of the fixed portion of plink confirm frames is 4 bytes longer than\nthe other plink_action frames. This path corrects an error in the length\nadjustment done for these type of frames.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" } ], "next": "57ef5ddb456649667438e023f67dd3a3ff3fbed8" }