)]}' { "log": [ { "commit": "61e115a56d1aafd6e6a8a9fee8ac099a6128ac7b", "tree": "add97bf6a1207a4caea3a86cf13495ad3dc477de", "parents": [ "5ee3afba88f5a79d0bff07ddd87af45919259f91" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Tue Sep 18 15:12:50 2007 -0400" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:51:36 2007 -0700" }, "message": "[SSB]: add Sonics Silicon Backplane bus support\n\nSSB is an SoC bus used in a number of embedded devices. The most\nwell-known of these devices is probably the Linksys WRT54G, but there\nare others as well. The bus is also used internally on the BCM43xx\nand BCM44xx devices from Broadcom.\n\nThis patch also includes support for SSB ID tables in modules, so\nthat SSB drivers can be loaded automatically.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "647e50f38345525d8261c295a0d0629dcea23a9b", "tree": "1bf37cb38df1ee3d3fe4accb665c521674dd27c3", "parents": [ "286201dcabf7311d2e22a95829ba40744b15c81d" ], "author": { "name": "Wim Van Sebroeck", "email": "wim@iguana.be", "time": "Sun Jul 29 18:46:50 2007 +0000" }, "committer": { "name": "Wim Van Sebroeck", "email": "wim@iguana.be", "time": "Sun Jul 29 18:58:39 2007 +0000" }, "message": "[WATCHDOG] Fix pcwd_init_module crash\n\nFix for the problem detected by Ingo Molnar:\nenabling CONFIG_PCWATCHDOG\u003dy crashes bzImage bootup.\n\nThe reason for this can be found in drivers/makefile\nWe first do:\nobj-y +\u003d char/\nand later we do:\nobj-y +\u003d base/ block/ misc/ mfd/ net/ media/\n\nSo if we put a platform or isa or usb bus driver in char/watchdog\n(which is called from the Makefile in drivers/char/Makefile)\nthen we didn\u0027t have the different device drivers initialized yet\n(they are in drivers/base and drivers/usb and ...)\n\nThis fix makes sure that we compile the watchdog drivers after\ndrivers/base, drivers/misc, drivers/pci and drivers/usb.\nWe also do the compile after hwmon because in the future the\nwatchdog temperature support will use the hwmon system.\n\nSigned-off-by: Wim Van Sebroeck \u003cwim@iguana.be\u003e\n\n" }, { "commit": "97e873e5c8ad8711ce4cca080cff4eb5d21b3aeb", "tree": "7736415a2086522a083392f9ead34dac76c9560c", "parents": [ "76c1ce7870fd9b05431da1bbd47fdafcc029a25b" ], "author": { "name": "Stephen Rothwell", "email": "sfr@canb.auug.org.au", "time": "Tue May 01 16:26:07 2007 +1000" }, "committer": { "name": "Stephen Rothwell", "email": "sfr@canb.auug.org.au", "time": "Fri Jul 20 13:28:41 2007 +1000" }, "message": "Start split out of common open firmware code\n\nThis creates drivers/of/base.c (depending on CONFIG_OF) and puts\nthe first trivially common bits from the prom.c files into it.\n\nSigned-off-by: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\nAcked-by: Paul Mackerras \u003cpaulus@samba.org\u003e\nAcked-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "709e89266b60eff444fc512400321eb02d2474eb", "tree": "39df4acd6e6180186db0b7e04c34237ccdca233b", "parents": [ "6db7016d17b235a24e0c1544c202defa47ae7247" ], "author": { "name": "Rusty Russell", "email": "rusty@rustcorp.com.au", "time": "Thu Jul 19 01:49:27 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Jul 19 10:04:52 2007 -0700" }, "message": "lguest: the Makefile and Kconfig\n\nThis is the Kconfig and Makefile to allow lguest to actually be\ncompiled.\n\nSigned-off-by: Rusty Russell \u003crusty@rustcorp.com.au\u003e\nCc: Andi Kleen \u003cak@suse.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "beafc54c4e2fba24e1ca45cdb7f79d9aa83e3db1", "tree": "9f2d4060e4ab29b1483124fa398be30f72696b34", "parents": [ "5bae7ac9feba925fd0099057f6b23d7be80b7b41" ], "author": { "name": "Hans J. Koch", "email": "hjk@linutronix.de", "time": "Thu Dec 07 10:58:29 2006 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Wed Jul 18 15:57:15 2007 -0700" }, "message": "UIO: Add the User IO core code\n\nThis interface allows the ability to write the majority of a driver in\nuserspace with only a very small shell of a driver in the kernel itself.\nIt uses a char device and sysfs to interact with a userspace process to\nprocess interrupts and control memory accesses.\n\nSee the docbook documentation for more details on how to use this\ninterface.\n\nFrom: Hans J. Koch \u003chjk@linutronix.de\u003e\nCc: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nCc: Benedikt Spranger \u003cb.spranger@linutronix.de\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "ad9a86121f5a374b48ce2924f8a9d7e94a04db27", "tree": "c14af462957ce9ee6de3e4537e15879c25a679aa", "parents": [ "b536b4b9623084d86f2b1f19cb44a2d6d74f00bf" ], "author": { "name": "Jeremy Fitzhardinge", "email": "jeremy@xensource.com", "time": "Tue Jul 17 18:37:06 2007 -0700" }, "committer": { "name": "Jeremy Fitzhardinge", "email": "jeremy@goop.org", "time": "Wed Jul 18 08:47:44 2007 -0700" }, "message": "xen: Add grant table support\n\nAdd Xen \u0027grant table\u0027 driver which allows granting of access to\nselected local memory pages by other virtual machines and,\nsymmetrically, the mapping of remote memory pages which other virtual\nmachines have granted access to.\n\nThis driver is a prerequisite for many of the Xen virtual device\ndrivers, which grant the \u0027device driver domain\u0027 restricted and\ntemporary access to only those memory pages that are currently\ninvolved in I/O operations.\n\nSigned-off-by: Jeremy Fitzhardinge \u003cjeremy@xensource.com\u003e\nSigned-off-by: Ian Pratt \u003cian.pratt@xensource.com\u003e\nSigned-off-by: Christian Limpach \u003cChristian.Limpach@cl.cam.ac.uk\u003e\nSigned-off-by: Chris Wright \u003cchrisw@sous-sol.org\u003e\n" }, { "commit": "4a11b59d8283662193a9c6a9c14c58d1b9bf0617", "tree": "492bf022c806ec6c554ca5f8e7c05ea6db138137", "parents": [ "7dcca30a32aadb0520417521b0c44f42d09fe05c" ], "author": { "name": "Anton Vorontsov", "email": "cbou@mail.ru", "time": "Fri May 04 00:27:45 2007 +0400" }, "committer": { "name": "David Woodhouse", "email": "dwmw2@infradead.org", "time": "Tue Jul 10 11:25:44 2007 +0100" }, "message": "[BATTERY] Universal power supply class (was: battery class)\n\nThis class is result of \"external power\" and \"battery\" classes merge,\nas suggested by David Woodhouse. He also implemented uevent support.\n\nHere how userspace seeing it now:\n\n \t# ls /sys/class/power\\ supply/\n \tac main-battery usb\n\n \t# cat /sys/class/power\\ supply/ac/type\n \tAC\n\n \t# cat /sys/class/power\\ supply/usb/type\n \tUSB\n\n \t# cat /sys/class/power\\ supply/main-battery/type\n \tBattery\n\n \t# cat /sys/class/power\\ supply/ac/online\n \t1\n\n \t# cat /sys/class/power\\ supply/usb/online\n \t0\n\n \t# cat /sys/class/power\\ supply/main-battery/status\n \tCharging\n\n \t# cat /sys/class/leds/h5400\\:red-left/trigger\n \tnone h5400-radio timer hwtimer ac-online usb-online\n \tmain-battery-charging-or-full [main-battery-charging]\n \tmain-battery-full\n\nSigned-off-by: Anton Vorontsov \u003ccbou@mail.ru\u003e\nSigned-off-by: David Woodhouse \u003cdwmw2@infradead.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\n" }, { "commit": "9b6a51746ffe8d619f1097675d2dc5e303470024", "tree": "52668d7adc6f5c1d347d65072878cf1f82670364", "parents": [ "fc0b60f1dc311a2f7443ce46305edd287b2d8947", "d79406dd140a3e6eed6f26b17f0c6620fe30b50c" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu May 10 13:29:36 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu May 10 13:30:08 2007 -0700" }, "message": "Merge branch \u0027juju\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6\n\n* \u0027juju\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (138 commits)\n firewire: Convert OHCI driver to use standard goto unwinding for error handling.\n firewire: Always use parens with sizeof.\n firewire: Drop single buffer request support.\n firewire: Add a comment to describe why we split the sg list.\n firewire: Return SCSI_MLQUEUE_HOST_BUSY for out of memory cases in queuecommand.\n firewire: Handle the last few DMA mapping error cases.\n firewire: Allocate scsi_host up front and allocate the sbp2_device as hostdata.\n firewire: Provide module aliase for backwards compatibility.\n firewire: Add to fw-core-y instead of assigning fw-core-objs in Makefile.\n firewire: Break out shared IEEE1394 constant to separate header file.\n firewire: Use linux/*.h instead of asm/*.h header files.\n firewire: Uppercase most macro names.\n firewire: Coding style cleanup: no spaces after function names.\n firewire: Convert card_rwsem to a regular mutex.\n firewire: Clean up comment style.\n firewire: Use lib/ implementation of CRC ITU-T.\n CRC ITU-T V.41\n firewire: Rename fw-device-cdev.c to fw-cdev.c and move header to include/linux.\n firewire: Future proof the iso ioctls by adding a handle for the iso context.\n firewire: Add read/write and size annotations to IOC numbers.\n ...\n\nAcked-by: Christoph Hellwig \u003chch@infradead.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "9c1600eda42e52796f49b36cf15b9debcfd09bea", "tree": "fe93f5924c7777cd5c3cc1ef6033dd2dfae542b5", "parents": [ "4298cfc3eb6110df989f784be516c6340c597a66" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Tue May 01 23:26:31 2007 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@hyperion.delvare", "time": "Tue May 01 23:26:31 2007 +0200" }, "message": "i2c: Add i2c_board_info and i2c_new_device()\n\nThis provides partial support for new-style I2C driver binding. It builds\non \"struct i2c_board_info\" declarations that identify I2C devices on a given\nboard. This is needed on systems with I2C devices that can\u0027t be fully probed\nand/or autoconfigured, such as many embedded Linux configurations where the\nway a given I2C device is wired may affect how it must be used.\n\nThere are two models for declaring such devices:\n\n * LATE -- using a public function i2c_new_device(). This lets modules\n declare I2C devices found *AFTER* a given I2C adapter becomes available.\n \n For example, a PCI card could create adapters giving access to utility\n chips on that card, and this would be used to associate those chips with\n those adapters.\n\n * EARLY -- from arch_initcall() level code, using a non-exported function\n i2c_register_board_info(). This copies the declarations *BEFORE* such\n an i2c_adapter becomes available, arranging that i2c_new_device() will\n be called later when i2c-core registers the relevant i2c_adapter.\n\n For example, arch/.../.../board-*.c files would declare the I2C devices\n along with their platform data, and I2C devices would behave much like\n PNPACPI devices. (That is, both enumerate from board-specific tables.)\n\nTo match the exported i2c_new_device(), the previously-private function\ni2c_unregister_device() is now exported.\n\nPending later patches using these new APIs, this is effectively a NOP.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "9b620d2a16814e5f2a063359c953c41f804e091a", "tree": "33c825cba2d8418212b3239c1d364a3a4c51126f", "parents": [ "80d74d5123bf3aecd32302809c4e61bb8a16786b" ], "author": { "name": "Roland Dreier", "email": "rolandd@cisco.com", "time": "Wed Apr 18 20:20:53 2007 -0700" }, "committer": { "name": "Roland Dreier", "email": "rolandd@cisco.com", "time": "Wed Apr 18 20:20:53 2007 -0700" }, "message": "IB: Remove reference to obsolete CONFIG_IPATH_CORE\n\nSince commit b1c1b6a3 (\"IB/ipath: merge ipath_core and ib_ipath\ndrivers\"), CONFIG_IPATH_CORE no longer exists, so there\u0027s no reason to\nhave a line for it in drivers/Makefile.\n\nPointed out by Robert P. J. Day \u003crpjday@mindspring.com\u003e.\n\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n" }, { "commit": "11f494ee25dd81af90255b1d61abc6f5508db4d0", "tree": "c28d953d5185af834db5bcdffa60e040a90467b6", "parents": [ "b3d6e151142c6d22abdf1e3e7bde0f6d828df945" ], "author": { "name": "Stefan Richter", "email": "stefanr@s5r6.in-berlin.de", "time": "Sun Mar 18 01:39:28 2007 +0100" }, "committer": { "name": "Stefan Richter", "email": "stefanr@s5r6.in-berlin.de", "time": "Tue Mar 20 23:27:19 2007 +0100" }, "message": "firewire: rename CONFIG_FW to CONFIG_FIREWIRE\n\nto avoid confusion with CONFIG_FW_LOADER.\n\nSigned-off-by: Stefan Richter \u003cstefanr@s5r6.in-berlin.de\u003e\nAcked-by: Kristian Høgsberg \u003ckrh@redhat.com\u003e\n" }, { "commit": "3038e353cfaf548eb94f02b172b9dbe412abd24c", "tree": "70e50c20e117e2dacb7cd810d00fe595e60d26ce", "parents": [ "08e15e81a40e3241ce93b4a43886f3abda184aa6" ], "author": { "name": "Kristian Høgsberg", "email": "krh@redhat.com", "time": "Tue Dec 19 19:58:27 2006 -0500" }, "committer": { "name": "Stefan Richter", "email": "stefanr@s5r6.in-berlin.de", "time": "Fri Mar 09 22:02:33 2007 +0100" }, "message": "firewire: Add core firewire stack.\n\nSigned-off-by: Kristian Høgsberg \u003ckrh@redhat.com\u003e\nSigned-off-by: Stefan Richter \u003cstefanr@s5r6.in-berlin.de\u003e\n" }, { "commit": "70e840499aae90be1de542894062ad2899d23642", "tree": "4d5122672bfb03fec0823540f19c7974979483f4", "parents": [ "81d79bec348ab06cba9ae9fc03eb015b6b83703a" ], "author": { "name": "Miguel Ojeda Sandonis", "email": "maxextreme@gmail.com", "time": "Sat Feb 10 01:44:32 2007 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sun Feb 11 10:51:24 2007 -0800" }, "message": "[PATCH] drivers: add LCD support\n\nAdd support for auxiliary displays, the ks0108 LCD controller, the\ncfag12864b LCD and adds a framebuffer device: cfag12864bfb.\n\n- Add a \"auxdisplay/\" folder in \"drivers/\" for auxiliary display\n drivers.\n\n- Add support for the ks0108 LCD Controller as a device driver. (uses\n parport interface)\n\n- Add support for the cfag12864b LCD as a device driver. (uses ks0108\n LCD Controller driver)\n\n- Add a framebuffer device called cfag12864bfb. (uses cfag12864b LCD\n driver)\n\n- Add the usual Documentation, includes, Makefiles, Kconfigs,\n MAINTAINERS, CREDITS...\n\n- Miguel Ojeda will maintain all the stuff above.\n\n[rdunlap@xenotime.net: workqueue fixups]\n[akpm@osdl.org: kconfig fix]\nSigned-off-by: Miguel Ojeda Sandonis \u003cmaxextreme@gmail.com\u003e\nCc: Greg KH \u003cgreg@kroah.com\u003e\nAcked-by: Paulo Marques \u003cpmarques@grupopie.com\u003e\nCc: \"Randy.Dunlap\" \u003crdunlap@xenotime.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "45941d0481f538324fa21d6450116d13f6e51e91", "tree": "263504809371b31622fc181917037a128d361a5d", "parents": [ "835d90c4218dffe6f9e7ac1ed79795197a4970c4" ], "author": { "name": "Soeren Sonnenburg", "email": "kernel@nn7.de", "time": "Thu Feb 08 14:20:38 2007 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Feb 09 09:25:47 2007 -0800" }, "message": "[PATCH] enable mouse button 2+3 emulation for x86 macs\n\nAs macbook/macbook pro\u0027s also have to live with a single mouse button the\nfollowing patch just enables the Macintosh device drivers menu in Kconfig +\nadds the macintosh dir to the obj-* to make macbook* users happy (who use\nexactly that since months....\n\nSigned-off-by: Soeren Sonnenburg \u003ckernel@nn7.de\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nCc: Paul Mackerras \u003cpaulus@samba.org\u003e\nCc: Dmitry Torokhov \u003cdtor@mail.ru\u003e\nCc: \u003cstable@kernel.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "6aa8b732ca01c3d7a54e93f4d701b8aabbe60fb7", "tree": "23fcbe6f4918cacdae26d513a2bd13e91d8b4c38", "parents": [ "f5f1a24a2caa299bb7d294aee92d7dd3410d9ed7" ], "author": { "name": "Avi Kivity", "email": "avi@qumranet.com", "time": "Sun Dec 10 02:21:36 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.osdl.org", "time": "Sun Dec 10 09:57:22 2006 -0800" }, "message": "[PATCH] kvm: userspace interface\n\nweb site: http://kvm.sourceforge.net\n\nmailing list: kvm-devel@lists.sourceforge.net\n (http://lists.sourceforge.net/lists/listinfo/kvm-devel)\n\nThe following patchset adds a driver for Intel\u0027s hardware virtualization\nextensions to the x86 architecture. The driver adds a character device\n(/dev/kvm) that exposes the virtualization capabilities to userspace. Using\nthis driver, a process can run a virtual machine (a \"guest\") in a fully\nvirtualized PC containing its own virtual hard disks, network adapters, and\ndisplay.\n\nUsing this driver, one can start multiple virtual machines on a host.\n\nEach virtual machine is a process on the host; a virtual cpu is a thread in\nthat process. kill(1), nice(1), top(1) work as expected. In effect, the\ndriver adds a third execution mode to the existing two: we now have kernel\nmode, user mode, and guest mode. Guest mode has its own address space mapping\nguest physical memory (which is accessible to user mode by mmap()ing\n/dev/kvm). Guest mode has no access to any I/O devices; any such access is\nintercepted and directed to user mode for emulation.\n\nThe driver supports i386 and x86_64 hosts and guests. All combinations are\nallowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae\nand non-pae paging modes are supported.\n\nSMP hosts and UP guests are supported. At the moment only Intel\nhardware is supported, but AMD virtualization support is being worked on.\n\nPerformance currently is non-stellar due to the naive implementation of the\nmmu virtualization, which throws away most of the shadow page table entries\nevery context switch. We plan to address this in two ways:\n\n- cache shadow page tables across tlb flushes\n- wait until AMD and Intel release processors with nested page tables\n\nCurrently a virtual desktop is responsive but consumes a lot of CPU. Under\nWindows I tried playing pinball and watching a few flash movies; with a recent\nCPU one can hardly feel the virtualization. Linux/X is slower, probably due\nto X being in a separate process.\n\nIn addition to the driver, you need a slightly modified qemu to provide I/O\ndevice emulation and the BIOS.\n\nCaveats (akpm: might no longer be true):\n\n- The Windows install currently bluescreens due to a problem with the\n virtual APIC. We are working on a fix. A temporary workaround is to\n use an existing image or install through qemu\n- Windows 64-bit does not work. That\u0027s also true for qemu, so it\u0027s\n probably a problem with the device model.\n\n[bero@arklinux.org: build fix]\n[simon.kagstrom@bth.se: build fix, other fixes]\n[uril@qumranet.com: KVM: Expose interrupt bitmap]\n[akpm@osdl.org: i386 build fix]\n[mingo@elte.hu: i386 fixes]\n[rdreier@cisco.com: add log levels to all printks]\n[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]\n[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]\nSigned-off-by: Yaniv Kamay \u003cyaniv@qumranet.com\u003e\nSigned-off-by: Avi Kivity \u003cavi@qumranet.com\u003e\nCc: Simon Kagstrom \u003csimon.kagstrom@bth.se\u003e\nCc: Bernhard Rosenkraenzer \u003cbero@arklinux.org\u003e\nSigned-off-by: Uri Lublin \u003curil@qumranet.com\u003e\nCc: Ingo Molnar \u003cmingo@elte.hu\u003e\nCc: Roland Dreier \u003crolandd@cisco.com\u003e\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Anthony Liguori \u003canthony@codemonkey.ws\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "63f3861d2fbf8ccbad1386ac9ac8b822c036ea00", "tree": "f95ff72d8e8bb99bea2e4ad0526d606c81bd9229", "parents": [ "4c2ae844b5ef85fd4b571c9c91ac48afa6ef2dfc" ], "author": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Fri Dec 08 18:41:30 2006 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Dec 08 10:43:20 2006 -0800" }, "message": "[PATCH] Generic HID layer - build\n\nThis modifies Makefiles and Kconfigs to properly reflect the creation of\ngeneric HID layer.\n\nIt also removes the dependency of BROKEN, which was introduced by the\nfirst patch in series (see the comment). Also updates credits.\n\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\nCc: Dmitry Torokhov \u003cdmitry.torokhov@gmail.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "eb30c72026500f9efa9bb23ab2393d6a9e36c5e1", "tree": "cf0f57ab3096a0f30e41f3cd7dbe8979b178a5b1", "parents": [ "e055595d3e5f5233374211bc6893e5d16976df99" ], "author": { "name": "Geert Uytterhoeven", "email": "Geert.Uytterhoeven@sonycom.com", "time": "Mon Nov 27 19:18:56 2006 +0100" }, "committer": { "name": "Paul Mackerras", "email": "paulus@samba.org", "time": "Mon Dec 04 20:41:14 2006 +1100" }, "message": "[POWERPC] ps3: Missed renames of CONFIG_PS3 to CONFIG_PPC_PS3\n\nWhen renaming CONFIG_PS3 to CONFIG_PPC_PS3, a few occurrences have been\nmissed.\n\nI also fixed up the alignment in arch/powerpc/platforms/Makefile.\n\nSigned-off-by: Geert Uytterhoeven \u003cGeert.Uytterhoeven@sonycom.com\u003e\nSigned-off-by: Arnd Bergmann \u003carnd.bergmann@de.ibm.com\u003e\n" }, { "commit": "a3d4d6435b56eb0b6ff4f88e5a513cfccfb3e770", "tree": "20f5af985f0e9cd3edaf46efe425c961a460f930", "parents": [ "de91a53429952875740692d1de36ae70d4cf81da" ], "author": { "name": "Geoff Levand", "email": "geoffrey.levand@am.sony.com", "time": "Thu Nov 23 00:47:00 2006 +0100" }, "committer": { "name": "Paul Mackerras", "email": "paulus@samba.org", "time": "Mon Dec 04 20:40:57 2006 +1100" }, "message": "[POWERPC] ps3: add ps3 platform system bus support\n\nAdds a PS3 system bus driver. This system bus is a virtual bus used to present\nthe PS3 system devices in the LDM.\n\nSigned-off-by: Geoff Levand \u003cgeoffrey.levand@am.sony.com\u003e\nSigned-off-by: Arnd Bergmann \u003carnd.bergmann@de.ibm.com\u003e\n" }, { "commit": "c6fd280766a050b13360d7c2d59a3d6bd3a27d9a", "tree": "fdbeab639bc3dec29267bbf4b32cff7c8dd03593", "parents": [ "79ed35a9f139ad2b2653dfdd5f45a8f1453e2cbb" ], "author": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Thu Aug 10 07:31:37 2006 -0400" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Thu Aug 10 07:31:37 2006 -0400" }, "message": "Move libata to drivers/ata.\n" }, { "commit": "5d0cf410e94b1f1ff852c3f210d22cc6c5a27ffa", "tree": "a30cd6d201295945f401fd1f2731493f68db9ee9", "parents": [ "61743fe445213b87fb55a389c8d073785323ca3e" ], "author": { "name": "john stultz", "email": "johnstul@us.ibm.com", "time": "Mon Jun 26 00:25:12 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Mon Jun 26 09:58:21 2006 -0700" }, "message": "[PATCH] Time: i386 Clocksource Drivers\n\nImplement the time sources for i386 (acpi_pm, cyclone, hpet, pit, and tsc).\nWith this patch, the conversion of the i386 arch to the generic timekeeping\ncode should be complete.\n\nThe patch should be fairly straight forward, only adding the new clocksources.\n\n[hirofumi@mail.parknet.co.jp: acpi_pm cleanup]\nSigned-off-by: John Stultz \u003cjohnstul@us.ibm.com\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\nSigned-off-by: John Stultz \u003cjohnstul@us.ibm.com\u003e\nSigned-off-by: OGAWA Hirofumi \u003chirofumi@mail.parknet.co.jp\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "c13c8260da3155f2cefb63b0d1b7dcdcb405c644", "tree": "ecfe02fa44a423a948f5fb5ad76497da2bb7a402", "parents": [ "427abfa28afedffadfca9dd8b067eb6d36bac53f" ], "author": { "name": "Chris Leech", "email": "christopher.leech@intel.com", "time": "Tue May 23 17:18:44 2006 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Sat Jun 17 21:18:43 2006 -0700" }, "message": "[I/OAT]: DMA memcpy subsystem\n\nProvides an API for offloading memory copies to DMA devices\n\nSigned-off-by: Chris Leech \u003cchristopher.leech@intel.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "cd5e25d93e6efeb93db7b6731b0a674495270621", "tree": "82b38420e37cf3cc71ddbd85b53e874a1f0c2299", "parents": [ "86dca4f8e6ab1fd8a3fb5838163fc9d7990f416e", "77d8798b554c856e21400bc8e761bc1b2ded8967" ], "author": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Sun Apr 02 12:51:22 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Sun Apr 02 12:51:22 2006 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband\n\n* \u0027for-linus\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:\n IB/ipath: kbuild infrastructure\n IB/ipath: infiniband verbs support\n IB/ipath: misc infiniband code, part 2\n IB/ipath: misc infiniband code, part 1\n IB/ipath: infiniband RC protocol support\n IB/ipath: infiniband UC and UD protocol support\n IB/ipath: infiniband header files\n IB/ipath: layering interfaces used by higher-level driver code\n IB/ipath: support for userspace apps using core driver\n IB/ipath: sysfs and ipathfs support for core driver\n IB/ipath: misc driver support code\n IB/ipath: chip initialisation code, and diag support\n IB/ipath: support for PCI Express devices\n IB/ipath: support for HyperTransport devices\n IB/ipath: core driver header files\n IB/ipath: core device driver\n" }, { "commit": "95d465fd750897ab32462a6702fbfe1b122cbbc0", "tree": "65c38b2f11c51bb6932e44dd6c92f15b0091abfe", "parents": [ "642fde17dceceb56c7ba2762733ac688666ae657", "683aa4012f53b2ada0f430487e05d37b0d94e90a" ], "author": { "name": "Dmitry Torokhov", "email": "dtor_core@ameritech.net", "time": "Sun Apr 02 00:08:05 2006 -0500" }, "committer": { "name": "Dmitry Torokhov", "email": "dtor_core@ameritech.net", "time": "Sun Apr 02 00:08:05 2006 -0500" }, "message": "Manual merge with Linus.\n\nConflicts:\n\tarch/powerpc/kernel/setup-common.c\n\tdrivers/input/keyboard/hil_kbd.c\n\tdrivers/input/mouse/hil_ptr.c\n" }, { "commit": "77d8798b554c856e21400bc8e761bc1b2ded8967", "tree": "ea5dd7ed3ccb4b7095c37d4633f6f6a7b0a6b38e", "parents": [ "6522108f19a998a5ded4d0c4d0f9eb9736398e31" ], "author": { "name": "Bryan O\u0027Sullivan", "email": "bos@pathscale.com", "time": "Wed Mar 29 15:23:39 2006 -0800" }, "committer": { "name": "Roland Dreier", "email": "rolandd@cisco.com", "time": "Fri Mar 31 13:14:21 2006 -0800" }, "message": "IB/ipath: kbuild infrastructure\n\nIntegrate the ipath core and OpenIB drivers into the kernel build\ninfrastructure. Add entry to MAINTAINERS.\n\nSigned-off-by: Bryan O\u0027Sullivan \u003cbos@pathscale.com\u003e\nSigned-off-by: Roland Dreier \u003crolandd@cisco.com\u003e\n" }, { "commit": "c72a1d608dd0eb3d553a08bfdf1c0041bebaa8a0", "tree": "56715f0e0af8a9c33725f3db2f14cf7f870ad46d", "parents": [ "75c1d31d9ea71025b73430c696b727e8aa15872d" ], "author": { "name": "Richard Purdie", "email": "rpurdie@rpsys.net", "time": "Fri Mar 31 02:31:04 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Fri Mar 31 12:18:56 2006 -0800" }, "message": "[PATCH] LED: add LED class\n\nAdd the foundations of a new LEDs subsystem. This patch adds a class which\npresents LED devices within sysfs and allows their brightness to be\ncontrolled.\n\nSigned-off-by: Richard Purdie \u003crpurdie@rpsys.net\u003e\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nCc: Greg KH \u003cgreg@kroah.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "c58411e95d7f5062dedd1a3064af4d359da1e633", "tree": "8816ec8e20ae8b1d622b41bc1e7e74c2bbd1f34d", "parents": [ "d23ee8fe6e2176a9d4dbfdd18edfa1b5bc3c79a5" ], "author": { "name": "Alessandro Zummo", "email": "a.zummo@towertech.it", "time": "Mon Mar 27 01:16:34 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Mon Mar 27 08:44:50 2006 -0800" }, "message": "[PATCH] RTC Subsystem: library functions\n\nRTC and date/time related functions.\n\nSigned-off-by: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "51c38f9bce274a1e8a90aa457fb433be738f7458", "tree": "1a04a18c40f7705c8b001f5483b95bdd38727c6f", "parents": [ "221979aad6ab4792617f2e58973aa6fc349d4036" ], "author": { "name": "Dmitry Torokhov", "email": "dtor_core@ameritech.net", "time": "Sun Feb 19 00:22:51 2006 -0500" }, "committer": { "name": "Dmitry Torokhov", "email": "dtor_core@ameritech.net", "time": "Sun Feb 19 00:22:51 2006 -0500" }, "message": "Input: initialize serio and gameport at subsystem level\n\nSerio and gameport cores do not depend on other drivers and are\nused by code living outside of drivers/input/{gameport|serio}.\nRegistering them at subsystem level guarantees that they are\nfully initialized before anyone tries to use them.\n\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\n" }, { "commit": "466575f4e975db1207c5e1a7be34aeaec6ddba1e", "tree": "37c0053f75f824d2df33c6f9962d6b4b102c1c8c", "parents": [ "3ee68c4af3fd7228c1be63254b9f884614f9ebb2" ], "author": { "name": "Jes Sorensen", "email": "jes@sgi.com", "time": "Thu Jan 19 04:54:00 2006 -0500" }, "committer": { "name": "Tony Luck", "email": "tony.luck@intel.com", "time": "Thu Jan 26 13:22:03 2006 -0800" }, "message": "[PATCH] drivers/sn/ must be entered for CONFIG_SGI_IOC3\n\nActually I think this is more appropriate so we don\u0027t end up with 17\ncases that add drivers/sn to the build lib.\nInclude drivers/sn when CONFIG_IA64_SGI_SN2 or CONFIG_IA64_GENERIC\nis enabled.\n\nAcked-by: Dave Jones \u003cdavej@redhat.com\u003e\nSigned-off-by: Jes Sorensen \u003cjes@sgi.com\u003e\nSigned-off-by: Tony Luck \u003ctony.luck@intel.com\u003e\n" }, { "commit": "da9bb1d27b21cb24cbb6a2efb5d3c464d357a01e", "tree": "016b66985a651d071d3873e74b115108ddf0b3f5", "parents": [ "2f768af73fea4c70f9046388a7ff648ad11f028e" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Wed Jan 18 17:44:13 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Wed Jan 18 19:20:31 2006 -0800" }, "message": "[PATCH] EDAC: core EDAC support code\n\nThis is a subset of the bluesmoke project core code, stripped of the NMI work\nwhich isn\u0027t ready to merge and some of the \"interesting\" proc functionality\nthat needs reworking or just has no place in kernel. It requires no core\nkernel changes except the added scrub functions already posted.\n\nThe goal is to merge further functionality only after the core code is\naccepted and proven in the base kernel, and only at the point the upstream\nextras are really ready to merge.\n\nFrom: doug thompson \u003cnorsk5@xmission.com\u003e\n\n This converts EDAC to sysfs and is the final chunk neccessary before EDAC\n has a stable user space API and can be considered for submission into the\n base kernel.\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\nSigned-off-by: Jesper Juhl \u003cjesper.juhl@gmail.com\u003e\nSigned-off-by: doug thompson \u003cnorsk5@xmission.com\u003e\nSigned-off-by: Pavel Machek \u003cpavel@suse.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "8ae12a0d85987dc138f8c944cb78a92bf466cea0", "tree": "ca032f25bb26f88cc35d68c6f8065143ce64a6a8", "parents": [ "67daf5f11f06b9b15f8320de1d237ccc2e74fe43" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Sun Jan 08 13:34:19 2006 -0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Jan 13 16:29:54 2006 -0800" }, "message": "[PATCH] spi: simple SPI framework\n\nThis is the core of a small SPI framework, implementing the model of a\nqueue of messages which complete asynchronously (with thin synchronous\nwrappers on top).\n\n - It\u0027s still less than 2KB of \".text\" (ARM). If there\u0027s got to be a\n mid-layer for something so simple, that\u0027s the right size budget. :)\n\n - The guts use board-specific SPI device tables to build the driver\n model tree. (Hardware probing is rarely an option.)\n\n - This version of Kconfig includes no drivers. At this writing there\n are two known master controller drivers (PXA/SSP, OMAP MicroWire)\n and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML\n mentions of other drivers in development.\n\n - No userspace API. There are several implementations to compare.\n Implement them like any other driver, and bind them with sysfs.\n\nThe changes from last version posted to LKML (on 11-Nov-2005) are minor,\nand include:\n\n - One bugfix (removes a FIXME), with the visible effect of making device\n names be \"spiB.C\" where B is the bus number and C is the chipselect.\n\n - The \"caller provides DMA mappings\" mechanism now has kerneldoc, for\n DMA drivers that want to be fancy.\n\n - Hey, the framework init can be subsys_init. Even though board init\n logic fires earlier, at arch_init ... since the framework init is\n for driver support, and the board init support uses static init.\n\n - Various additional spec/doc clarifications based on discussions\n with other folk. It adds a brief \"thank you\" at the end, for folk\n who\u0027ve helped nudge this framework into existence.\n\nAs I\u0027ve said before, I think that \"protocol tweaking\" is the main support\nthat this driver framework will need to evolve.\n\nFrom: Mark Underwood \u003cbasicmark@yahoo.com\u003e\n\n Update the SPI framework to remove a potential priority inversion case by\n reverting to kmalloc if the pre-allocated DMA-safe buffer isn\u0027t available.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "de1d815fccee1f4766a7e56054ab0ec3f6f3a7db", "tree": "e767e18755de6efc55f8ea2759ece2aa74574b05", "parents": [ "123656d4cc8c946f578ebd18c2050f5251720428" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Sat Jan 07 14:54:15 2006 +0000" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Sat Jan 07 14:54:15 2006 +0000" }, "message": "[ARM] Move AMBA bus code to drivers/amba/\n\nMake the AMBA bus code visible to other architectures.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "6015d2c4ca5470509d9721d7bab8d796617ed996", "tree": "d113c63de9a576e7f5f68a30c6f67fb7d0e7fe80", "parents": [ "e3c3374fbf7efe9487edc53cd10436ed641983aa" ], "author": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Sat Dec 03 20:50:51 2005 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Sat Dec 03 20:50:51 2005 -0800" }, "message": "Link USB drivers later in the kernel\n\nWe want to link the \"regular\" SCSI drivers before the USB storage\ndriver, since historically we\u0027ve always detected internal SCSI disks\nbefore the external USB storage modules.\n\nThe link order matters for initcall ordering, and this got broken by\nmistake by commit 7586269c0b52970f60bb69fcb86e765fc1d72309 which moved\nthe USB host controller PCI quirk handling around.\n\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "394b701ce4fbfde919a9bcbf84cb4820a7c6d47c", "tree": "a397fff4043a9810e753fb81224349bd36db45b8", "parents": [ "d217d5450f11d8c907c0458d175b0dc999b4d06d" ], "author": { "name": "Matt Porter", "email": "mporter@kernel.crashing.org", "time": "Mon Nov 07 01:00:15 2005 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Mon Nov 07 07:53:46 2005 -0800" }, "message": "[PATCH] RapidIO support: core base\n\nAdds a RapidIO subsystem to the kernel. RIO is a switched fabric interconnect\nused in higher-end embedded applications. The curious can look at the specs\nover at http://www.rapidio.org\n\nThe core code implements enumeration/discovery, management of\ndevices/resources, and interfaces for RIO drivers.\n\nThere\u0027s a lot more to do to take advantages of all the hardware features.\nHowever, this should provide a good base for folks with RIO hardware to start\ncontributing.\n\nSigned-off-by: Matt Porter \u003cmporter@kernel.crashing.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "e87eaad107d3c0fa81bf9de84f0fe2b7eaaf1fb9", "tree": "0664a672fed959bd354514bee281957555471884", "parents": [ "de672e4ade25502c28486da005be3eb79534017d" ], "author": { "name": "Paul Mundt", "email": "lethal@linux-sh.org", "time": "Mon Nov 07 00:58:19 2005 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Mon Nov 07 07:53:27 2005 -0800" }, "message": "[PATCH] sh: Re-add sh to drivers/Makefile\n\ndrivers/sh/ got dropped from drivers/Makefile, so add it back in..\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "7586269c0b52970f60bb69fcb86e765fc1d72309", "tree": "a0cb04f9527101e8b9331350e4dd9d57e6e019e7", "parents": [ "38ffdd62b0f466ef9126ac9f060ade5f218b4887" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Fri Sep 23 17:14:37 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Oct 28 16:47:38 2005 -0700" }, "message": "[PATCH] USB: move handoff code\n\nThis moves the PCI quirk handling for USB host controllers from the\nPCI directory to the USB directory. Follow-on patches will need to:\n\n(a) merge these copies with the originals in the HCD reset methods.\nthey don\u0027t wholly agree, despite doing the very same thing; and\n\n(b) eventually change it so \"usb-handoff\" is the default, to help\nget more robust USB/BIOS/input/... interactions.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n drivers/Makefile | 2\n drivers/pci/quirks.c | 253 ---------------------------------------\n drivers/usb/Makefile | 1\n drivers/usb/host/Makefile | 5\n drivers/usb/host/pci-quirks.c | 272 ++++++++++++++++++++++++++++++++++++++++++\n 5 files changed, 280 insertions(+), 253 deletions(-)\n" }, { "commit": "7672d0b54411371e0b6a831c1cb2f0ce615de6dc", "tree": "27d88da3263041b91d18346b3bcd27807d332f1a", "parents": [ "357d596bd552ad157a906289ab13ea6ba7e66e3d" ], "author": { "name": "Evgeniy Polyakov", "email": "johnpol@2ka.mipt.ru", "time": "Sun Sep 11 19:15:07 2005 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Sep 11 19:15:07 2005 -0700" }, "message": "[NET]: Add netlink connector.\n\nKernel connector - new userspace \u003c-\u003e kernel space easy to use\ncommunication module which implements easy to use bidirectional\nmessage bus using netlink as it\u0027s backend. Connector was created to\neliminate complex skb handling both in send and receive message bus\ndirection.\n\nConnector driver adds possibility to connect various agents using as\none of it\u0027s backends netlink based network. One must register\ncallback and identifier. When driver receives special netlink message\nwith appropriate identifier, appropriate callback will be called.\n\nFrom the userspace point of view it\u0027s quite straightforward:\n\n\tsocket();\n\tbind();\n\tsend();\n\trecv();\n\nBut if kernelspace want to use full power of such connections, driver\nwriter must create special sockets, must know about struct sk_buff\nhandling... Connector allows any kernelspace agents to use netlink\nbased networking for inter-process communication in a significantly\neasier way:\n\nint cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));\nvoid cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask);\n\nstruct cb_id\n{\n\t__u32\t\t\tidx;\n\t__u32\t\t\tval;\n};\n\nidx and val are unique identifiers which must be registered in\nconnector.h for in-kernel usage. void (*callback) (void *) - is a\ncallback function which will be called when message with above idx.val\nwill be received by connector core.\n\nUsing connector completely hides low-level transport layer from it\u0027s\nusers.\n\nConnector uses new netlink ability to have many groups in one socket.\n\n[ Incorporating many cleanups and fixes by myself and\n Andrew Morton -DaveM ]\n\nSigned-off-by: Evgeniy Polyakov \u003cjohnpol@2ka.mipt.ru\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "27a639a92d3289c4851105efcbc2f8b88969194f", "tree": "09ee327d3ed3e2c40d5dc3b0f6b283477282deec", "parents": [ "d395bf12d1ba61437e546eb642f0d7ea666123ff", "bf4e70e54cf31dcca48d279c7f7e71328eebe749" ], "author": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Mon Aug 29 17:02:17 2005 -0400" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Mon Aug 29 17:02:17 2005 -0400" }, "message": "Auto-update from upstream\n" }, { "commit": "888ba6c62bc61a995d283977eb3a6cbafd6f4ac6", "tree": "2a1614a7c63460e98f55ac5905f3a4be679138f1", "parents": [ "84ffa747520edd4556b136bdfc9df9eb1673ce12" ], "author": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Wed Aug 24 12:07:20 2005 -0400" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Wed Aug 24 12:08:54 2005 -0400" }, "message": "[ACPI] delete CONFIG_ACPI_BOOT\n\nit has been a synonym for CONFIG_ACPI since 2.6.12\n\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "a4e137ab1447fc5009f21e257971aa60a9ec98fb", "tree": "5ceb2e007a746fa84e45f08fefe6d37a3572fea1", "parents": [ "099d44e869f1886b5eb02a5145ca97b5e4142e28" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Thu Aug 18 10:06:59 2005 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu Aug 18 10:06:59 2005 +0100" }, "message": "[MFD] Add multimedia communication port core support\n\nAdd support for the core of the multimedia communication port\nframework. This is a port used to communicate with devices\nwith two DMA paths and a control path.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "ad2f931dcb41bcfae38cc77d78b7821dfef83cf2", "tree": "344940f7ce52d94cf9bdd862409c63ebeb9bfa3a", "parents": [ "0e65f82814e9828d3ff54988de9e7c0b36794daa" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Jul 02 18:15:49 2005 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Mon Jul 11 14:14:31 2005 -0700" }, "message": "[PATCH] I2C: Move hwmon drivers (1/3)\n\nPart 1: Configuration files and Makefiles.\n\nFrom: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "e5d310b349b2cbcc0dab31139c92201f332695bb", "tree": "2884b77c09a575d8252bb490d384e8f1ece19d42", "parents": [ "22329b511a97557b293583194037d1f4c71e1504" ], "author": { "name": "Brent Casavant", "email": "bcasavan@sgi.com", "time": "Tue Jun 21 17:16:01 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Tue Jun 21 18:46:32 2005 -0700" }, "message": "[PATCH] ioc4: CONFIG split\n\nThe SGI IOC4 I/O controller chip drivers are currently all configured by\nCONFIG_BLK_DEV_SGIIOC4. This is undesirable as not all IOC4 hardware features\nare needed by all systems.\n\nThis patch adds two configuration variables, CONFIG_SGI_IOC4 for core IOC4\ndriver support (see patch 1/3 in this series for further explanation) and\nCONFIG_SERIAL_SGI_IOC4 to independently enable serial port support.\n\nSigned-off-by: Brent Casavant \u003cbcasavan@sgi.com\u003e\nAcked-by: Pat Gefre \u003cpfg@sgi.com\u003e\nAcked-by: Jeremy Higdon \u003cjeremy@sgi.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d", "parents": [], "author": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n" } ] }