)]}' { "log": [ { "commit": "fba56f4942ea18cb7c8c013b192243d063204547", "tree": "d7e13dd365a3bc546346c1fd291b7f0578c90d20", "parents": [ "ecd91490ecd5cb7dc3cd7537a1936a4495a81906", "e063a05cb7b869853ac7968c29acc0891b0d70f9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "message": "Merge \"msm_fb: display: change perf level for 720p landscape video\" into msm-3.0" }, { "commit": "ecd91490ecd5cb7dc3cd7537a1936a4495a81906", "tree": "51644c001d4b6914c0c3a790121d1e0cf9f90c39", "parents": [ "1d632b8e348ee5a3ea339f04258415c7d1441c0c", "00f29e5fe0c984cc9996b24cd500e26f301cf6bc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "message": "Merge \"mfd: pm8921-core: Add support for additional PMIC PM8917 regulators\" into msm-3.0" }, { "commit": "1d632b8e348ee5a3ea339f04258415c7d1441c0c", "tree": "3667466e281cb6b85c779573bb7ec6f6df09fae8", "parents": [ "5e0f482227d88c6e689e8dfbd3d9741c2f9e582d", "c802017219171609538a6ed5d0b789480e5881df" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "message": "Merge \"msm: Add QPNP support routines\" into msm-3.0" }, { "commit": "4b62e74dd89a3928e3da27ecf4592a6773bec0fa", "tree": "aa84e937279d71d5bbe2c73cfecfa88be420fe07", "parents": [ "8b33378ef1dc9311f51d53993790c8df67ec1e23", "f3e34e5d2b85478346bf3a826d2e0a74e67b97aa" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 24 04:46:30 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Feb 24 04:46:30 2012 -0800" }, "message": "Merge \"USB: gadget: Enable streaming mode support in hardware\" into msm-3.0" }, { "commit": "8b33378ef1dc9311f51d53993790c8df67ec1e23", "tree": "ce8cc9e2674827b5d69a1d0034dd37dc253c49d0", "parents": [ "74f6473fbbd6703ec5ea8d901a70218e1bf35f6f", "a84982a54ca8deafcd3afc584c4a1a59c2c5f10d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 24 04:46:30 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Feb 24 04:46:30 2012 -0800" }, "message": "Merge changes I5016e03f,Ic9272330,I4ad10f5e into msm-3.0\n\n* changes:\n ASoc: msm: Fix array index out of bound issue\n ASoc: msm: Fix Null dereferencing and variable initialization\n ASoC: wcd9310: Fix memory leak and NULL dereferencing\n" }, { "commit": "68f4b749782e09566b3282377fb59d8e6c4dcde9", "tree": "cc33d1a353a58bb65c41cb492e2401136acd4063", "parents": [ "0564f549826e3bdca452d52ab675388cc8d9d1a0", "d00708822d3ce95d33e85b453590b29a8b28ae31" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 23 21:36:41 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Feb 23 21:36:41 2012 -0800" }, "message": "Merge \"msm: kgsl: Update A3XX REG_TO_MEM opcodes in legacy context switch\" into msm-3.0" }, { "commit": "c802017219171609538a6ed5d0b789480e5881df", "tree": "792777ca59a5cb787a732bcdd25adb212606b325", "parents": [ "0564f549826e3bdca452d52ab675388cc8d9d1a0" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Mon Jan 23 19:17:10 2012 -0800" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Thu Feb 23 18:24:46 2012 -0800" }, "message": "msm: Add QPNP support routines\n\nQPNP is a SPMI based PMIC architecture developed by Qualcomm.\nThis library constitutes routines that should be necessary for\nmost, if not all QPNP based devices. The goal is to minimize the\namount of code duplication.\n\nChange-Id: I0fddfcef88416bba488480d790d1cf361d9e67ac\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "0564f549826e3bdca452d52ab675388cc8d9d1a0", "tree": "98055c918a0912d5fb9488be4b3ea584839a0c8e", "parents": [ "6c549919919a31098f377c268a2fe85cc2f7886e", "3a7774b2d5e1b3e6967bc2456be77402cd51b239" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 23 15:21:06 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Feb 23 15:21:06 2012 -0800" }, "message": "Merge \"msm: vidc: Remove duplicate header files\" into msm-3.0" }, { "commit": "e063a05cb7b869853ac7968c29acc0891b0d70f9", "tree": "59f9124bc0797b699c67419740bd1d7a68c050bc", "parents": [ "6c549919919a31098f377c268a2fe85cc2f7886e" ], "author": { "name": "Huaibin Yang", "email": "huaibiny@codeaurora.org", "time": "Mon Jan 30 16:26:57 2012 -0800" }, "committer": { "name": "Huaibin Yang", "email": "huaibiny@codeaurora.org", "time": "Thu Feb 23 12:16:54 2012 -0800" }, "message": "msm_fb: display: change perf level for 720p landscape video\n\nNew perf level 3 (128M mdp clk) is used to play 720p landscape video,\nchanged from previous perf level 2 (160M mdp clk), to save power.\n\nChange-Id: Ie27de4d2e407513eeb4cfb8fba6dd535a45c1364\nSigned-off-by: Huaibin Yang \u003chuaibiny@codeaurora.org\u003e\n" }, { "commit": "00f29e5fe0c984cc9996b24cd500e26f301cf6bc", "tree": "53120244f2d0984b574c7cfc253ea293707459b6", "parents": [ "6c549919919a31098f377c268a2fe85cc2f7886e" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Mon Feb 13 11:38:45 2012 -0800" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Feb 23 11:46:21 2012 -0800" }, "message": "mfd: pm8921-core: Add support for additional PMIC PM8917 regulators\n\nAdd support for the new regulators available on PMIC PM8917\nbeyond those present on PMIC PM8921.\n\nRegulator changes between PMIC PM8921 and PMIC PM8917:\nPM8917 adds: 6 PMOS LDOs (L30-L35), 1 boost regulator\nPM8917 removes: negative charge pump (NCP)\n\nChange-Id: I663c61277fb42301724230b73e93f819e55b08c4\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "6c549919919a31098f377c268a2fe85cc2f7886e", "tree": "7b484c5b43963044b33f947b099f2292b9d1d7b9", "parents": [ "5ce8dd9f0b57ac400e44c8cd56e934c8c6f05c11", "69bf55767a9ca5085a75aa004d23f96a0e8bac02" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 23 06:34:41 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Feb 23 06:34:41 2012 -0800" }, "message": "Merge changes I50ac40e4,Ib318497b into msm-3.0\n\n* changes:\n slim_msm: Remove active channels of a satellite when it restarts\n slimbus: Don\u0027t allow a grouped channel to be controlled individually\n" }, { "commit": "3a7774b2d5e1b3e6967bc2456be77402cd51b239", "tree": "6991a4086815c241d2aa67043a9767b79fc7d85d", "parents": [ "4f11b8178fadbd077e0e5ce7a15b25cc81cb0c44" ], "author": { "name": "Deva Ramasubramanian", "email": "dramasub@codeaurora.org", "time": "Fri Feb 10 12:09:50 2012 -0800" }, "committer": { "name": "Deva Ramasubramanian", "email": "dramasub@codeaurora.org", "time": "Wed Feb 22 19:01:52 2012 -0800" }, "message": "msm: vidc: Remove duplicate header files\n\n- Updated the header files in /include/media/msm to mirror the\n header files in drivers/video/msm/vidc/common/.\n- Deleting header files in drivers/video/msm/vidc/common/ as we\n wish to use headers in /include/media/msm going forward.\n\nChange-Id: I58f64e6168d3cc101394414400dd79b82c429ae4\nSigned-off-by: Deva Ramasubramanian \u003cdramasub@codeaurora.org\u003e\n" }, { "commit": "69bf55767a9ca5085a75aa004d23f96a0e8bac02", "tree": "185b1dbcb5ffdd681ea990a3fb338b61adf02139", "parents": [ "2e7026aae0aed8d61e56f4544ab65c69e36f7a10" ], "author": { "name": "Sagar Dharia", "email": "sdharia@codeaurora.org", "time": "Tue Feb 21 14:45:35 2012 -0700" }, "committer": { "name": "Sagar Dharia", "email": "sdharia@codeaurora.org", "time": "Wed Feb 22 17:45:13 2012 -0700" }, "message": "slim_msm: Remove active channels of a satellite when it restarts\n\nWhen a subsystem hosting satellite restarts, it may not have cleaned\nup its active channels. Remove all active channels when this is\ndetected. Other satellites, and channels already removed (if cleanup\nwas executed on the subsystem hosting satellite) are not affected.\n\nChange-Id: I50ac40e450335a4fa5be957bacf997311410bee1\nSigned-off-by: Sagar Dharia \u003csdharia@codeaurora.org\u003e\n" }, { "commit": "2e7026aae0aed8d61e56f4544ab65c69e36f7a10", "tree": "3e896ac119984a06c7a2c19ae50b3f88550d94d4", "parents": [ "f287480fde75690015d7d950cb68cb794f18a5e1" ], "author": { "name": "Sagar Dharia", "email": "sdharia@codeaurora.org", "time": "Tue Feb 21 17:48:14 2012 -0700" }, "committer": { "name": "Sagar Dharia", "email": "sdharia@codeaurora.org", "time": "Wed Feb 22 17:44:04 2012 -0700" }, "message": "slimbus: Don\u0027t allow a grouped channel to be controlled individually\n\nOnce client defines a group of channels, it should be only allowed to\nbe controlled as a group and not individually to avoid synchronization\nissues between grouped channels.\n\nChange-Id: Ib318497b2666eb5134a1cb220e5df6569c9fcc2e\nSigned-off-by: Sagar Dharia \u003csdharia@codeaurora.org\u003e\n" }, { "commit": "a5d4e66d0c856d22217422e4f4ddf9ced75340aa", "tree": "a361c7e350c89788febdd2d9645348cb749d03ab", "parents": [ "059af1b14474fe855bbf5f9be1df2e48efa51a7b", "4f9211f34fb524e2411ced701b79b24642ce40f3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Feb 22 01:00:01 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Feb 22 01:00:12 2012 -0800" }, "message": "Merge \"wfd: Change device to /dev/video38\" into msm-3.0" }, { "commit": "059af1b14474fe855bbf5f9be1df2e48efa51a7b", "tree": "b5de1dab94da853efdfca4102c9559e139682c56", "parents": [ "4a0c4e0343a628073d91942d2abc565747a49cf8", "ac5337bb28f81c29b7449626f442e84742186574" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Feb 22 01:00:01 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Feb 22 01:00:12 2012 -0800" }, "message": "Merge \"msm_fb: display: Fix Chimei WUXGA panel driver for 60 fps.\" into msm-3.0" }, { "commit": "bcb27898bdd22bc9ed7a4b4672b60dadd208ece2", "tree": "11c916b411a6daa94c5d6e43aeb38e90dbc02767", "parents": [ "4492ecd448e4e7d52a9990bd65ec28e45412cdd2", "9919b7e5503bc078720337da27a421ec3833e528" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Feb 22 01:00:01 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Feb 22 01:00:12 2012 -0800" }, "message": "Merge \"msm_fb: display: perform mixer flush on every commit\" into msm-3.0" }, { "commit": "490f9a35301951572efa44f6b1bf6900af5a96fb", "tree": "18bea8b167407efd8fb07b73ff7c42d731da8a68", "parents": [ "642756f4efa0af0cd9ae7475214f6b6751a39337", "525da18ed57e6bd13c1f7067e193b19d77b8b470" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Feb 22 01:00:01 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Feb 22 01:00:12 2012 -0800" }, "message": "Merge \"regulator: pm8xxx-regulator: Add control for boost regulators\" into msm-3.0" }, { "commit": "642756f4efa0af0cd9ae7475214f6b6751a39337", "tree": "0ce664551189540a2ada80b50ad409b25c31723c", "parents": [ "6df8022aad2456c3e88e2e1ef546069af4001dc7", "c7a7cc6dc79a6f60b0468efd0fb3964b1ebc7a70" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Feb 21 19:55:53 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Feb 21 19:55:53 2012 -0800" }, "message": "Merge \"msm_fb: Add support for Area Reduced Gamma Correction (AR GC)\" into msm-3.0" }, { "commit": "46d235f841c6387f8f23ded6d98b498857efbd07", "tree": "3e548a99d588bb1ffda7b28f0994dae167126ba7", "parents": [ "c18a9d9375dd0ba9dd4017ea568cad02733377d0", "a54263b0056b15cad1336a33d57bb1db013e8abb" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Feb 21 19:55:53 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Feb 21 19:55:53 2012 -0800" }, "message": "Merge \"msm: Removed XPU violations.\" into msm-3.0" }, { "commit": "c18a9d9375dd0ba9dd4017ea568cad02733377d0", "tree": "149200af13c1d79f31fbc39463dc9228c8e53de1", "parents": [ "609e9579c79c19a9b38726ce8f043f5f42b894da", "4a32c65a5ac4f959f47a1bf0d56946160ea90830" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Feb 21 19:55:53 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Feb 21 19:55:53 2012 -0800" }, "message": "Merge \"Revert \"msm: kgsl: flush device workqueue before stop\"\" into msm-3.0" }, { "commit": "c7a7cc6dc79a6f60b0468efd0fb3964b1ebc7a70", "tree": "6a30fb62fca871e5f71e79474d32ee4e7b652b0d", "parents": [ "85153bdf335804c526746ab8d930087b658f3d50" ], "author": { "name": "Pravin Tamkhane", "email": "pravint@codeaurora.org", "time": "Thu Dec 15 16:25:45 2011 -0800" }, "committer": { "name": "Carl Vanderlip", "email": "carlv@codeaurora.org", "time": "Tue Feb 21 12:39:53 2012 -0800" }, "message": "msm_fb: Add support for Area Reduced Gamma Correction (AR GC)\n\nProvide API for programming Area Reduced Gamma Correction parameters.\nAR GC is used for adjusting panel gamma behavior for R, G and B channels.\n\nTested using dummy AR-GC data from panel calibration and fbtest\n\nChange-Id: I64e9f81510160ffaacb6927de1812dfd2a3e5436\nSigned-off-by: Pravin Tamkhane \u003cpravint@codeaurora.org\u003e\n" }, { "commit": "85153bdf335804c526746ab8d930087b658f3d50", "tree": "c9bf1ab49de9d5054c1a63c9e34c5dbe0f674bdd", "parents": [ "f287480fde75690015d7d950cb68cb794f18a5e1" ], "author": { "name": "Pravin Tamkhane", "email": "pravint@codeaurora.org", "time": "Tue Dec 13 13:56:46 2011 -0800" }, "committer": { "name": "Carl Vanderlip", "email": "carlv@codeaurora.org", "time": "Tue Feb 21 12:39:53 2012 -0800" }, "message": "msm_fb: Add support for Polynomial Color Correction (PCC)\n\nAdd support for programming Polynomial Color Correction (PCC)\nparameters on MDP. PCC is used for enhancing colors on display panel by\nprogramming the display panel calibration parameters\n\nTested using fbtest and dummy calibration data\n\nChange-Id: I57dae828365f02d560e932ed0f26aa76c819fd31\nSigned-off-by: Pravin Tamkhane \u003cpravint@codeaurora.org\u003e\n" }, { "commit": "a54263b0056b15cad1336a33d57bb1db013e8abb", "tree": "45a9c3248837cdb9754d81690517b076ce299eca", "parents": [ "f287480fde75690015d7d950cb68cb794f18a5e1" ], "author": { "name": "Ramesh Masavarapu", "email": "rameshm@codeaurora.org", "time": "Wed Feb 01 22:49:01 2012 -0800" }, "committer": { "name": "Ramesh Masavarapu", "email": "rameshm@codeaurora.org", "time": "Tue Feb 21 09:19:37 2012 -0800" }, "message": "msm: Removed XPU violations.\n\nDuring initialization, there is a violation in writing to\n\"read only\" registers for targets that support trust zone.\nTrustzone marks certain registers as read-only.\nThis change fixes the issue by writing to registers only\non targets that do not support trust zone.\n\nChange-Id: I69bb0f1bad199201aa3dd8b378ca1683dfa81c86\nSigned-off-by: Ramesh Masavarapu \u003crameshm@codeaurora.org\u003e\n" }, { "commit": "d00708822d3ce95d33e85b453590b29a8b28ae31", "tree": "8f501d3f8cb233886bf3aac8fb6982ca6bf4e4f4", "parents": [ "f287480fde75690015d7d950cb68cb794f18a5e1" ], "author": { "name": "Jordan Crouse", "email": "jcrouse@codeaurora.org", "time": "Tue Feb 21 08:54:52 2012 -0700" }, "committer": { "name": "Jordan Crouse", "email": "jcrouse@codeaurora.org", "time": "Tue Feb 21 09:18:29 2012 -0700" }, "message": "msm: kgsl: Update A3XX REG_TO_MEM opcodes in legacy context switch\n\nVersion 29 of the PM4 firmware for A3XX modified the format of the\nREG_TO_MEM opcode by changing the bit shift of one the fields.\nModify the legacy context switch code accordingly. This will break\nusers of older firmware, but the old firmware shouldn\u0027t ever be in\nwide use anyway, so backwards compatibility is not a concern.\n\nChange-Id: Ic0dedbad9a6d50077a0001c95d2a0dcd30c4f070\nSigned-off-by: Jordan Crouse \u003cjcrouse@codeaurora.org\u003e\n" }, { "commit": "f287480fde75690015d7d950cb68cb794f18a5e1", "tree": "71218e10c907e171073b2a8b7827df6016383d7d", "parents": [ "21c232edaab8f99e308f811938f2170f1e5e08b8", "d803a63cbc771e1685f976e2964a16a0468c8bb0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Feb 20 22:55:51 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Feb 20 22:55:51 2012 -0800" }, "message": "Merge \"msm: camera: Fix crash issue while enabling regular stats\" into msm-3.0" }, { "commit": "ebfbb8e95be29af8034547d34f86b4de27147f69", "tree": "54a3e2e73ed14901d969c8309b55ee24a99227ae", "parents": [ "9783591dd873fb21a98dead7eaf4edaba5b82fac", "cd47322cbe12c9b0b528dc909060f3083e634def" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Feb 20 19:18:16 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Feb 20 19:18:16 2012 -0800" }, "message": "Merge \"Input: atmel_mxt_ts - convert to MT protocol B\" into msm-3.0" }, { "commit": "ac5337bb28f81c29b7449626f442e84742186574", "tree": "01234be33debfe911b0e9efe14602ce7a7fc8575", "parents": [ "6847bd28dc44d58f957eed6faef3b82559d67c7f" ], "author": { "name": "Amir Samuelov", "email": "amirs@codeaurora.org", "time": "Tue Feb 21 03:26:00 2012 +0200" }, "committer": { "name": "Amir Samuelov", "email": "amirs@codeaurora.org", "time": "Tue Feb 21 03:26:00 2012 +0200" }, "message": "msm_fb: display: Fix Chimei WUXGA panel driver for 60 fps.\n\nFix front porch blanking according to the panel EDID\nfor 60 frames per seconds.\n\n\nChange-Id: I3de0a238f5d08e14073a409bfcf2ec20002048b7\nSigned-off-by: Amir Samuelov \u003camirs@codeaurora.org\u003e\n" }, { "commit": "6847bd28dc44d58f957eed6faef3b82559d67c7f", "tree": "c86c0c866abb507ec46a7098577f2aa298def263", "parents": [ "7a6fadfd94ed3a6724f5093668185807c30ef80c", "6c3bb3269d8dea04a2fbdc48a5cc267589f7f4f3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Feb 20 14:25:42 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Feb 20 14:25:42 2012 -0800" }, "message": "Merge \"msm: camera: EVB: Add Kernel driver OV5647 \u0026 OV7692\" into msm-3.0" }, { "commit": "cd47322cbe12c9b0b528dc909060f3083e634def", "tree": "84b7138d0449b3cc2dadecb6c0fff4f445f4f642", "parents": [ "7a6fadfd94ed3a6724f5093668185807c30ef80c" ], "author": { "name": "Joonyoung Shim", "email": "jy0922.shim@samsung.com", "time": "Tue Feb 14 18:32:48 2012 -0800" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Feb 20 11:35:49 2012 -0800" }, "message": "Input: atmel_mxt_ts - convert to MT protocol B\n\nAtmel touchscreen chips can use MT protocol B because they can assign\nunique id to ABS_MT_TRACKING_ID from finger id provided by hardware.\n\nChange-Id: Ia37e7d993380b28599b09aed9075c91ce4259f88\nSigned-off-by: Joonyoung Shim \u003cjy0922.shim@samsung.com\u003e\nReviewed-by: Henrik Rydberg \u003crydberg@euromail.se\u003e\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "7a6fadfd94ed3a6724f5093668185807c30ef80c", "tree": "aa501f87511be9db1875e87082909749c4f6c1b5", "parents": [ "ad8da125f7b57329b843bbbf402bdfe8ef7df76f", "5f4b579b68fdc6f50ba20a50e31814a7ec2bc45d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Feb 20 06:36:45 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Feb 20 06:36:46 2012 -0800" }, "message": "Merge \"msm_fb: Change the sequence of backlight control for Gordon panel\" into msm-3.0" }, { "commit": "ad8da125f7b57329b843bbbf402bdfe8ef7df76f", "tree": "bc3130f6aeef0dfa70b5806a737a73a7c61e1d13", "parents": [ "3dd0da08007089fda97a30b3054282186e0034f3", "91e4135c0f44697891b7ea933a8dacfac375a1e3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Feb 20 06:36:45 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Feb 20 06:36:46 2012 -0800" }, "message": "Merge \"hdmi_msm: Power down PHY register during suspend\" into msm-3.0" }, { "commit": "3dd0da08007089fda97a30b3054282186e0034f3", "tree": "554105f9d9bcbecb6a42f517a2bd119a12f079c5", "parents": [ "a6f1b3b6ff73f734457f7e7b350b66d6b55fd1a8", "70090f997f6d634af492d4b2f6880edd5f5b56be" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Feb 20 06:36:45 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Feb 20 06:36:46 2012 -0800" }, "message": "Merge changes Ia865c101,Ib95f277e,Ic482fcb2 into msm-3.0\n\n* changes:\n msm: 8064: Add support for isa1200 haptic chip\n mfd: pm8xxx-misc: Add function to write aux clock register\n msm: 8064: Add GSBI1 support for I2C QUP devices\n" }, { "commit": "a6f1b3b6ff73f734457f7e7b350b66d6b55fd1a8", "tree": "3834e1e0de0539dd680a35b8ece64747c7a9e9e2", "parents": [ "6aecdb7e753ba981c45cddd1e06cd1e8124bb48f", "7fa5dc93ea18615859ee9df230efda89554a3a12" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Feb 20 06:36:45 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Feb 20 06:36:46 2012 -0800" }, "message": "Merge \"msm_serial: Use new clock framework apis\" into msm-3.0" }, { "commit": "6aecdb7e753ba981c45cddd1e06cd1e8124bb48f", "tree": "bc491a6faf8a71acd4f53d19130fbed37f645b9e", "parents": [ "db48804665104111c8f87ed34e3417f7574e31d8", "ede0a63aaa49024ac4a0a304bd5e32f34f6b6180" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Feb 20 06:36:45 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Feb 20 06:36:46 2012 -0800" }, "message": "Merge \"msm_fb: Make buffers aligned to 4K page boundary\" into msm-3.0" }, { "commit": "6c3bb3269d8dea04a2fbdc48a5cc267589f7f4f3", "tree": "ca2b1fbcb48fdf0fd746f7c78c31b55c666ecdd8", "parents": [ "b51d07e68c094c8a6a6193d376ac4e94cbf32ba7" ], "author": { "name": "Su Liu", "email": "suliu@codeaurora.org", "time": "Tue Feb 14 02:15:05 2012 +0530" }, "committer": { "name": "Lokesh Kumar Aakulu", "email": "lkumar@codeaurora.org", "time": "Mon Feb 20 18:37:39 2012 +0530" }, "message": "msm: camera: EVB: Add Kernel driver OV5647 \u0026 OV7692\n\nAdd Initial sensor driver support for 5MP OV5647\nand 1MP OV7692 on EVB 1.0 platform.\n\nChange-Id: I8155abe1ff3c388561feed3a032c6603df892e1e\nSigned-off-by: Su Liu \u003csuliu@codeaurora.org\u003e\nSigned-off-by: Lokesh Kumar Aakulu \u003clkumar@codeaurora.org\u003e\n" }, { "commit": "a9a10311ec0a14bc299c3cb3690cd57a8a718e0f", "tree": "54f4897bb3c1e421330060373fa6c91eaa5c8dbe", "parents": [ "b51d07e68c094c8a6a6193d376ac4e94cbf32ba7", "65bcf37b414acd9bd20473dc1c32076c5b67e68a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Feb 20 03:56:00 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Feb 20 03:56:00 2012 -0800" }, "message": "Merge changes I8af92595,Icecd65d0 into msm-3.0\n\n* changes:\n msm: 9615: Add HSIC host pdev to board and device file.\n usb: hsic: Add support for HSIC host on 9615\n" }, { "commit": "91e4135c0f44697891b7ea933a8dacfac375a1e3", "tree": "7b9e9ab970bd0d4b425b2245a5b26a26a65ad208", "parents": [ "13f773f95f479eef038331917d9aa16a97af4c66" ], "author": { "name": "Padmanabhan Komanduru", "email": "pkomandu@codeaurora.org", "time": "Fri Feb 10 18:23:04 2012 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Feb 20 00:35:21 2012 -0700" }, "message": "hdmi_msm: Power down PHY register during suspend\n\nAdd change to power down phy register to save current\nwhen device goes to suspend state.\n\nCRs-fixed: 333739\nChange-Id: I5c1c4202637cc8391d1dba03071a246e4f891307\nSigned-off-by: Padmanabhan Komanduru \u003cpkomandu@codeaurora.org\u003e\n" }, { "commit": "4c994c91e73b8b23ff0d346a05dd7fad658e045f", "tree": "17810b6a15e94c27cc6af92a2a4a95be9a12916b", "parents": [ "3c40fc500812101f391515699b19cf7839b2c92a" ], "author": { "name": "Amy Maloche", "email": "amaloche@codeaurora.org", "time": "Wed Feb 15 09:56:15 2012 -0800" }, "committer": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Mon Feb 20 12:14:48 2012 +0530" }, "message": "mfd: pm8xxx-misc: Add function to write aux clock register\n\nThis call configures the XO to the MP3 clocks. These\nclocks route over PMIC gpios and are used as an independent\nclock source for MP3, haptics.\n\nChange-Id: Ib95f277eae8bcb9a7e9da12fc5fe2baec4e72493\nSigned-off-by: Amy Maloche \u003camaloche@codeaurora.org\u003e\n" }, { "commit": "5f4b579b68fdc6f50ba20a50e31814a7ec2bc45d", "tree": "1bfd5e503b9b162577423e020750196a8eb5ca0a", "parents": [ "13f773f95f479eef038331917d9aa16a97af4c66" ], "author": { "name": "Padmanabhan Komanduru", "email": "pkomandu@codeaurora.org", "time": "Wed Dec 07 17:14:10 2011 +0530" }, "committer": { "name": "Padmanabhan Komanduru", "email": "pkomandu@codeaurora.org", "time": "Mon Feb 20 11:54:03 2012 +0530" }, "message": "msm_fb: Change the sequence of backlight control for Gordon panel\n\nDuring Resume, backlight control settings are getting set before the\nGordon panel has been initialized. This change corrects the sequence\nand ensures that display is proper after resume operation\n\nChange-Id: I22a6c857da3cb011404198b94e4347f76292a77e\nSigned-off-by: Padmanabhan Komanduru \u003cpkomandu@codeaurora.org\u003e\n" }, { "commit": "ede0a63aaa49024ac4a0a304bd5e32f34f6b6180", "tree": "7ed34f513d11e3bf0ab6dede3f82dd9540de1ada", "parents": [ "13f773f95f479eef038331917d9aa16a97af4c66" ], "author": { "name": "Padmanabhan Komanduru", "email": "pkomandu@codeaurora.org", "time": "Wed Jan 25 12:01:28 2012 +0530" }, "committer": { "name": "Padmanabhan Komanduru", "email": "pkomandu@codeaurora.org", "time": "Mon Feb 20 11:31:18 2012 +0530" }, "message": "msm_fb: Make buffers aligned to 4K page boundary\n\nThis change makes the frame buffers aligned to the page\nboundary. Improves GPU performance since accessing the\nframe buffer from page boundary is faster.\n\nCRs-fixed: 325134\nChange-Id: I6ce4477f62536a3cd81064e26dc08f2b199e181b\nSigned-off-by: Padmanabhan Komanduru \u003cpkomandu@codeaurora.org\u003e\n" }, { "commit": "f6dc7749683486f797ab388394da370e0dd41e98", "tree": "ee6226ecf5997157184d1fe0e6be2e6edf2161ad", "parents": [ "13f773f95f479eef038331917d9aa16a97af4c66" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed Feb 15 09:11:55 2012 -0800" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 19 20:26:15 2012 -0700" }, "message": "gpu: ion: Move MFC heap to different address\n\nVideo hardware has the following requirements for\nION heaps:\n\n1. MM heap must be at a higher address than FW heap.\n2. MFC heap must at a higher address than FW\n3. MM heap must be adjacent to FW heap.\n (There cannot be another heap between FW and MM heap)\n4. MM and MFC heap cannot be more than 256MB away\n from the base address of the FW heap.\n\nMM heap is configured as a reusable heap (FMEM heap) and FMEM\nis carved out at a much higher address than the other heaps breaking\nthe above requirements. To support the above requirements the\nMFC heap together with the FW heap must be carved out at the same\nlocation as MM heap.\n\nChange-Id: Ie0acb4b267d4307190ea3cd9ff23c710ffa1a538\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "1573599adbb42c606d8b91854c76461b3f212c3e", "tree": "a89c78538f7c9d02c6bdbda66d9ef027d115f1e4", "parents": [ "d9f843f47ce78bcdd8ba655d5122fe3bbaf4e1a1" ], "author": { "name": "Manoj Rao", "email": "manojraj@codeaurora.org", "time": "Thu Jan 26 17:15:09 2012 -0800" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 19 09:25:57 2012 -0700" }, "message": "msm_fb: HDMI-CEC: Line latch patch\n\nThe CEC hardware latches upon reading a corrupt bit\nin bit 7 of any bytes due various timing issues. If\nthe driver detects this latch up then we call CEC reset\nto release the lacthed up line.\n\nChange-Id: Ia5a2e09372129a4358a46a623e6880095da4f0b4\nCRs-Fixed: 329507\nSigned-off-by: Manoj Rao \u003cmanojraj@codeaurora.org\u003e\n" }, { "commit": "8c8ba383ec2babf49db20ad171c796aafa70c80d", "tree": "17b688b8c58a5e183a93058de26ae06755fd3ac1", "parents": [ "127823f1a52b6f973fdb12c6c932ad3ad3fafd66" ], "author": { "name": "Lena Salman", "email": "esalman@codeaurora.org", "time": "Tue Feb 14 15:59:31 2012 +0200" }, "committer": { "name": "Lena Salman", "email": "esalman@codeaurora.org", "time": "Sun Feb 19 17:35:11 2012 +0200" }, "message": "usb: hsic: Add support for HSIC host on 9615\n\nTo add support for 9615, the following changes were made in the host file:\n1. Add HSIC host initialization for non-GPIO configuration.\n2. Add support for no-pdata (which is not needed for\nnon-GPIO configuration)\n3. Move set_clk_rate calls to target specific clock files.\n\nChange-Id: Icecd65d0b8467a4e4b1696ff0e14aa759d1be679\nSigned-off-by: Lena Salman \u003cesalman@codeaurora.org\u003e\n" }, { "commit": "578155db650bdf18d3e3131d133a6181c93ddb28", "tree": "9d22fec4ca12eff4a64f633ea2d174e57a9dbf15", "parents": [ "ca132bbf072d2765de63e1869e723a35df3177bb", "a369ce03ca048fb511642ac1cb73c1f652d70c50" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 19 05:59:45 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Feb 19 05:59:45 2012 -0800" }, "message": "Merge \"msm_fb: display: Fix for HDMI bootup issue\" into msm-3.0" }, { "commit": "ca132bbf072d2765de63e1869e723a35df3177bb", "tree": "1befcc778dc04ce644bc7ccab08174f42634192f", "parents": [ "e9914941c6df556c07c14e97a9d7c5bd81b469c5", "7716ef8c6180714d9948ecc008fb82ffef5628d7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 19 05:59:45 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Feb 19 05:59:45 2012 -0800" }, "message": "Merge \"msm_fb: hdmi: Fix for different resolution TV switch hang.\" into msm-3.0" }, { "commit": "e9914941c6df556c07c14e97a9d7c5bd81b469c5", "tree": "8fe00c46f81be421db3252f7e74d93e105c1ebc6", "parents": [ "96df6de8d6cf3a26734ee5ecec795661d03515af", "4e1bd3108c8532d630d8470a22b474acfdc790e2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 19 05:59:45 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Feb 19 05:59:45 2012 -0800" }, "message": "Merge \"diag: Avoid partial packet reads\" into msm-3.0" }, { "commit": "3085fd887d636f4aeacf6776f53b54af8d419ce6", "tree": "e5d399691926a1bf740c3d7b77ce92ff79d6bee4", "parents": [ "aa00ae8c0816b18b0a26931dd0cb4d138d3c02ab", "c0d64ce6199db39c0f1bd6cf4ffddf82ad79b37e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 19 01:53:05 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Feb 19 01:53:05 2012 -0800" }, "message": "Merge \"thermal: msm8960_tsens: Fix setting mode for disabled sensors\" into msm-3.0" }, { "commit": "aa00ae8c0816b18b0a26931dd0cb4d138d3c02ab", "tree": "85986286d19d8edbf9ef1d0d6f04b18fa5607aff", "parents": [ "3997532c7c1675e5de4370621b1c068795cb6c5b", "00083572d8bfbba92df374310993ed7555e90dab" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 19 01:53:05 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Feb 19 01:53:05 2012 -0800" }, "message": "Merge \"mmc: msm_sdcc: reset IO_PAD_PWR_SWITCH when non UHS-I SD card is inserted\" into msm-3.0" }, { "commit": "3997532c7c1675e5de4370621b1c068795cb6c5b", "tree": "9f79b195e83d80d027e1374c7d4397af98afc271", "parents": [ "84e50a35b3f71fac590a94c4eb9f9b7ae6ca9e20", "3b9595f629805408d572892227091cd1b42560fd" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 18 23:45:12 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 18 23:45:12 2012 -0800" }, "message": "Merge \"msm_fb: hdmi: Fix for EDID parser error.\" into msm-3.0" }, { "commit": "84e50a35b3f71fac590a94c4eb9f9b7ae6ca9e20", "tree": "c06fbb77e99b7ecf7d609d93cb6a34e19032244e", "parents": [ "f9cd81b13928e02bc7c30bc9edb38d1e1aefff3e", "04570ab5d0358f078c89eec573fa7f3416669387" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 18 23:45:12 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 18 23:45:12 2012 -0800" }, "message": "Merge \"msm_serial: Cleanup regarding usage of clock enable/disable apis\" into msm-3.0" }, { "commit": "00083572d8bfbba92df374310993ed7555e90dab", "tree": "1332662821c885ecc9ecd550b81740bf2245ec17", "parents": [ "a411efd14284d60e147725bd289e56a2b73834ca" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Wed Feb 15 16:18:01 2012 +0530" }, "committer": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Sun Feb 19 10:33:05 2012 +0530" }, "message": "mmc: msm_sdcc: reset IO_PAD_PWR_SWITCH when non UHS-I SD card is inserted\n\nSDCC driver sets the IO_PAD_PWR_SWITCH bit to 1 to indicate\nSDCC controller that IO pad voltage level needs to be switched\nfrom 3.3v to 1.8v when initializing UHS-I (SD3.0 compliant) cards.\nBut if UHS-I card is inserted first and then removed after that\nand now if we insert the non UHS-I card then there is a possibility\nthat IO_PAD_PWR_SWITCH bit may still remain set to 1.\n\nThis change resets the IO_PAD_PWR_SWITCH bit to 0 if voltage\nswitch from 3.3v to 1.8v is not required.\n\nCRs-fixed: 337145\nChange-Id: Iaafd96a40a132a4c3a614ae72b22f24d3e11be3f\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "a411efd14284d60e147725bd289e56a2b73834ca", "tree": "ff51fd67de8a87c016544bbb9b2cfb83b7dc6b8e", "parents": [ "d68f56ad52411ebd7b1708f990f6d52a3a3ef913", "ec27a6e9f253ff94d6a6b1bf0bc506d5bcd8d28a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 18 19:53:58 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 18 19:53:58 2012 -0800" }, "message": "Merge changes Icbe6da31,I05d66155,I7a0f10a2 into msm-3.0\n\n* changes:\n msm: camera: Change sensor power up sequence\n defconfig: msm8960: Add sensor defconfigs\n defconfig: msm8660: Add IMX074 config in defconfig\n" }, { "commit": "c0d64ce6199db39c0f1bd6cf4ffddf82ad79b37e", "tree": "c06dc774e4ec05978a46e812a7738612eea96ee5", "parents": [ "83939476180494cedeecc698ce3529bd4e5c9840" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Fri Feb 17 09:23:16 2012 -0800" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Sat Feb 18 19:24:47 2012 -0800" }, "message": "thermal: msm8960_tsens: Fix setting mode for disabled sensors\n\nThermal driver in kernel currently requires the main sensor\nto perform mitigation. Disable all the auxiliary sensors\nand update the mode of the main sensor as being enabled during\nTSENS init.\n\nRound the converted temperature to the nearest degree.\nRemove unwanted register reads added for debug and reference\nto magic numbers in the code.\n\nChange-Id: Id5652ba16f9adb462dc61266600f394901eee194\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "02d29e193d826ea1498df5b3789562833a507ae2", "tree": "d4ad54a399f66520e34f2488eb65dcd254e45587", "parents": [ "69951757bca0c796fe0703237e0bbca5f5bd1cc6", "36d8ccd620799d2ad224f22a4c4c34c0256e1d08" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 18 17:49:44 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 18 17:49:44 2012 -0800" }, "message": "Merge changes I36de195a,I7c868d59 into msm-3.0\n\n* changes:\n msm_fb: display: Add DSI Video Toshiba WUXGA(1920x1200) panel support\n msm: display: Rename Asus WUXGA panel to Toshiba WUXGA panel\n" }, { "commit": "ec27a6e9f253ff94d6a6b1bf0bc506d5bcd8d28a", "tree": "9f514fd386a6d6192ece52872aebf966c2eb99ce", "parents": [ "81477a711505c1aeb34e6e4da5c2245cd39f4719" ], "author": { "name": "Sreesudhan Ramakrish Ramkumar", "email": "srramku@codeaurora.org", "time": "Sat Feb 11 20:41:19 2012 -0800" }, "committer": { "name": "Sreesudhan Ramakrish Ramkumar", "email": "srramku@codeaurora.org", "time": "Sat Feb 18 15:17:29 2012 -0800" }, "message": "msm: camera: Change sensor power up sequence\n\n1) Currently same power up sequence is followed\nfor all sensors. This request has different power\nup sequence for IMX074, OV2720 and MT9M114 sensors\nas per vendor recommendation.\n2) Remove compile time macro condition in\nboard file\n3) Make sensor config independent of Kconfig\n\nChange-Id: Icbe6da31a8cb510f1d0c73bf29eda74ad74050ac\nSigned-off-by: Sreesudhan Ramakrish Ramkumar \u003csrramku@codeaurora.org\u003e\n" }, { "commit": "fc630dceef8a6c0727f052318ea3076e360f6f0f", "tree": "eea39ae4c61f0874373f3f924f81ad98eadfac40", "parents": [ "f2e4d7b8034b86fd257b0e70e3b9dceefebcb3f3" ], "author": { "name": "Hody Hung", "email": "hhung@codeaurora.org", "time": "Tue Jan 17 14:41:34 2012 -0800" }, "committer": { "name": "Sreesudhan Ramakrish Ramkumar", "email": "srramku@codeaurora.org", "time": "Sat Feb 18 06:21:51 2012 -0800" }, "message": "msm: camera: correct op_pixel_clk value\n\n1) The op_pixel_clk is higher than the actual output rate,\nwhen vfe get the value and set the same for vfe clk, it\nset to higher frequency which will draw more power.\n2) The timing issue is due to the vfe timing requirement\nfor blanking time. Since we reduce the vfe clk, the\nblanking lines required more to meet the minimum\nrequirement.\n\nChange-Id: I27d781d6524bfae007d00c20d6d60d2e0582543f\nSigned-off-by: Hody Hung \u003chhung@codeaurora.org\u003e\n" }, { "commit": "9919b7e5503bc078720337da27a421ec3833e528", "tree": "a3bdee018aef1b5e2658863874688048ce5b8e9c", "parents": [ "a0927785b2dd9d67ac221fa6972689355a7c51fe" ], "author": { "name": "Adrian Salido-Moreno", "email": "adrianm@codeaurora.org", "time": "Fri Feb 10 15:57:39 2012 -0800" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 18 04:45:08 2012 -0700" }, "message": "msm_fb: display: perform mixer flush on every commit\n\nMixer needs to be flushed on every commit instead of just when mixer cfg\nchanges to flush changes in blending configuration\n\nCRs-Fixed: 336655\nChange-Id: Ia56380eac1bd9dfb0795d930dc97a85dd30ba8a8\nSigned-off-by: Adrian Salido-Moreno \u003cadrianm@codeaurora.org\u003e\n" }, { "commit": "f2e4d7b8034b86fd257b0e70e3b9dceefebcb3f3", "tree": "f6cfaf7cd5ebac0a6677de90c92edba64ffea317", "parents": [ "c69f4c9233489955a8a32a350586c23764a23279", "3ba8e61b0c62d3edea4e7b42a6d2fc7b8f7f6682" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 18 03:41:27 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 18 03:41:27 2012 -0800" }, "message": "Merge \"msm: camera: fix memory leak in actuator\" into msm-3.0" }, { "commit": "c69f4c9233489955a8a32a350586c23764a23279", "tree": "4cbea7b692940b88a2fa7a2b64204e3cd4c7e98b", "parents": [ "4f8ac38fe640635f0b0829e5d9bb81b64f2a444b", "dbbefd7e3586a832447909f17e4ee99edb68bfc3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 18 03:41:27 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 18 03:41:27 2012 -0800" }, "message": "Merge \"vidc: cleanup allocated ion buffers in case of crash.\" into msm-3.0" }, { "commit": "4f8ac38fe640635f0b0829e5d9bb81b64f2a444b", "tree": "488d3562e2a2b4cd7fd21f064d30e797521e07a9", "parents": [ "2352e9add65ca0dad736e391577dc98e95e086b1", "0cd4136a5aa869a232f052b01e865555caa07340" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 18 03:41:27 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 18 03:41:27 2012 -0800" }, "message": "Merge \"drivers: net: qfec: Reset PHY during init.\" into msm-3.0" }, { "commit": "dd61cd147fa93f62292aa34ee9cfb2a93526c935", "tree": "953655deaeeb6f84046a88b4f27211f56c51ba2e", "parents": [ "a0927785b2dd9d67ac221fa6972689355a7c51fe", "9e1c0a0270f5e0f2027e4d6cadd29711ece820f4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 18 03:41:27 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 18 03:41:27 2012 -0800" }, "message": "Merge \"crypto: Add support for larger ce block size.\" into msm-3.0" }, { "commit": "7fa5dc93ea18615859ee9df230efda89554a3a12", "tree": "eeff85743e73f3f9ebbe8cd5fe7b8c73459c2353", "parents": [ "04570ab5d0358f078c89eec573fa7f3416669387" ], "author": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Fri Jan 27 09:07:59 2012 +0530" }, "committer": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Sat Feb 18 14:42:17 2012 +0530" }, "message": "msm_serial: Use new clock framework apis\n\nClock framework provides clk_prepare/clk_unprepare (callable from\nnon-atomic context only) and clk_enable/clk_disable (callable from\natomic/non-atomic context) APIs. Start using these new APIs. This\nchange doesn\u0027t use new clock APIs for CONFIG_SERIAL_MSM_RX_WAKEUP\nand CONFIG_SERIAL_MSM_CLOCK_CONTROL selected features as these are\nlegacy features and has not been used since longtime and probably\nbroken in functionality. Hence new clock framework related change\nfor these two features would be added if it is required to be\nsupported in future.\n\nChange-Id: I4f58f45e63bb4c2a9c320ffb18fe28532ed5ab55\nSigned-off-by: Mayank Rana \u003cmrana@codeaurora.org\u003e\n" }, { "commit": "04570ab5d0358f078c89eec573fa7f3416669387", "tree": "49febfe54f9dfcda5598e90a21d99a47924afa5e", "parents": [ "a0927785b2dd9d67ac221fa6972689355a7c51fe" ], "author": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Tue Jan 24 09:58:32 2012 +0530" }, "committer": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Sat Feb 18 14:38:35 2012 +0530" }, "message": "msm_serial: Cleanup regarding usage of clock enable/disable apis\n\nCurrently driver uses clock apis (clock_enable()/clock_disable()) before\naccessing any UART Core register. Hence remove all usage of clock apis\nwhich is just increasing the refcount of uart clock instead of turning\non/off the uart lock. Start using serial core PM functionality to enable\ndisable the uart clock.\n\nChange-Id: I42e180fe6b3b92e4d9cc6d289f5f4689658e51c6\nSigned-off-by: Mayank Rana \u003cmrana@codeaurora.org\u003e\n" }, { "commit": "a0927785b2dd9d67ac221fa6972689355a7c51fe", "tree": "2b39c3d8d7c74b14251f59e0f21ac2cf73f59428", "parents": [ "b4eabf5fc85a7c6d0aa04b245dda8551b1449e1a", "fe282e9d62d3190ba4d8b5ded4f386e451f1a0b9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 17 23:01:01 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Feb 17 23:01:01 2012 -0800" }, "message": "Merge \"msm: camera: optimize csiphy setting\" into msm-3.0" }, { "commit": "b4eabf5fc85a7c6d0aa04b245dda8551b1449e1a", "tree": "a4eaa1f1485a1cc631dbb6fec5fd01f88b58c100", "parents": [ "036a1599eb7cecec33e445935b492015c004d4be", "55648fc2ab536294f7d549c822df8f17317b91c9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 17 23:01:01 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Feb 17 23:01:01 2012 -0800" }, "message": "Merge changes I52dea1bd,I85a2d76d into msm-3.0\n\n* changes:\n msm_fb: display: Add mutex during display turn off\n msm_fb: display: protect dma status for video mode panel\n" }, { "commit": "a369ce03ca048fb511642ac1cb73c1f652d70c50", "tree": "902d9fcd6b27f08e76f820009149b5b98598d913", "parents": [ "fdcfa0b68b64333c54d410c60ce8578ba1b9e005" ], "author": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Fri Jan 20 16:13:43 2012 +0530" }, "committer": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Sat Feb 18 11:23:48 2012 +0530" }, "message": "msm_fb: display: Fix for HDMI bootup issue\n\nIf the device is booted up with HDMI cable connected, HDTV would go\nblank unless the HDMI cable is removed and inserted again. This is\nhappening because the dtv pipe is initialized after HDMI core is\ninitialized. The dtv pipe needs to be allocated at the bootup time\nwhen dtv is turned on to syncronize the HDMI core and DTV overlay.\n\nCRs-fixed: 331867\nChange-Id: I90f6434e8440548391a6846b47bb5539f2e436b7\nSigned-off-by: Ajay Singh Parmar \u003caparmar@codeaurora.org\u003e\n" }, { "commit": "4f9211f34fb524e2411ced701b79b24642ce40f3", "tree": "8c166615154d4dee4fd244a0f9137f08d18904de", "parents": [ "7de67f73997a865573d91b611ade2c8d2208e2cc" ], "author": { "name": "Deva Ramasubramanian", "email": "dramasub@codeaurora.org", "time": "Thu Feb 16 17:55:35 2012 -0800" }, "committer": { "name": "Deva Ramasubramanian", "email": "dramasub@codeaurora.org", "time": "Fri Feb 17 17:38:36 2012 -0800" }, "message": "wfd: Change device to /dev/video38\n\nPick an explicit v4l2 video device number instead of relying\non framework to pick for us.\n\nChange-Id: I0e640c7b8a05b9c7f4bfe12a0445fb54976519ed\nSigned-off-by: Deva Ramasubramanian \u003cdramasub@codeaurora.org\u003e\nCRs-Fixed: 337522\n" }, { "commit": "4a32c65a5ac4f959f47a1bf0d56946160ea90830", "tree": "de8accc444a10d81ec8c83685783e5c4e2bdcaf8", "parents": [ "7de67f73997a865573d91b611ade2c8d2208e2cc" ], "author": { "name": "Suman Tatiraju", "email": "sumant@codeaurora.org", "time": "Fri Feb 17 11:59:05 2012 -0800" }, "committer": { "name": "Suman Tatiraju", "email": "sumant@codeaurora.org", "time": "Fri Feb 17 12:06:49 2012 -0800" }, "message": "Revert \"msm: kgsl: flush device workqueue before stop\"\n\nThis reverts commit f8e5cd2af7b43bc92e297fdb549d5607df2fee97.\n\nChange-Id: Ie2902a33ffca298a27d9ef811e7e57a6d3630c5f\nSigned-off-by: Suman Tatiraju \u003csumant@codeaurora.org\u003e\n" }, { "commit": "ffc265213c4b83d944e3f04cb5933854a5c476fc", "tree": "d23bbf4277757f03017d7c23d770ff63b41170fe", "parents": [ "7de67f73997a865573d91b611ade2c8d2208e2cc" ], "author": { "name": "Shiv Maliyappanahalli", "email": "smaliyap@codeaurora.org", "time": "Thu Jan 19 14:51:22 2012 -0800" }, "committer": { "name": "Shiv Maliyappanahalli", "email": "smaliyap@codeaurora.org", "time": "Fri Feb 17 10:42:35 2012 -0800" }, "message": "ASoC: wcd9310: Fix memory leak and NULL dereferencing\n\nDereference of tabla structure\u0027s content without checking if tabla\nis NULL will cause a crash.\nJumping to label fail will cause tabla to be not freed and hence\na memory leak.\n\nSigned-off-by: Shiv Maliyappanahalli \u003csmaliyap@codeaurora.org\u003e\nChange-Id: I4ad10f5ef4d051dc2f881dc385ae2690c590d042\n" }, { "commit": "dbbefd7e3586a832447909f17e4ee99edb68bfc3", "tree": "058280941415e4f1260db4bd38f5a752e288bcce", "parents": [ "7de67f73997a865573d91b611ade2c8d2208e2cc" ], "author": { "name": "Deepak Kotur", "email": "dkotur@codeaurora.org", "time": "Tue Feb 14 08:39:04 2012 -0800" }, "committer": { "name": "Deepak Kotur", "email": "dkotur@codeaurora.org", "time": "Fri Feb 17 08:29:29 2012 -0800" }, "message": "vidc: cleanup allocated ion buffers in case of crash.\n\nwhen a userspace process crashes, the video driver\nrelease function is called and the allocated\nion buffers are cleaned up to avoid memory leaks in case\nof userspace process crash.\n\nChange-Id: I538381b08b27adffe64e23dcf479802fc62179a4\nSigned-off-by: Deepak Kotur \u003cdkotur@codeaurora.org\u003e\n" }, { "commit": "9e1c0a0270f5e0f2027e4d6cadd29711ece820f4", "tree": "60545f57f50a2e71fdd467e791ee8d04d9d6769e", "parents": [ "e9f676d5e4038fb5aa74e786ed28904bf701809f" ], "author": { "name": "Ramesh Masavarapu", "email": "rameshm@codeaurora.org", "time": "Tue Feb 07 08:56:40 2012 -0800" }, "committer": { "name": "Ramesh Masavarapu", "email": "rameshm@codeaurora.org", "time": "Fri Feb 17 08:06:06 2012 -0800" }, "message": "crypto: Add support for larger ce block size.\n\nAdd support for CE block size to 64 bytes on MDM9x15 target.\nThe modem on MDM9x15 did not support 64byte crci on data mover till now.\n\nChange-Id: I4ea08f9e6097a17280763b9c0ca063de19a5c0f4\nSigned-off-by: Ramesh Masavarapu \u003crameshm@codeaurora.org\u003e\n" }, { "commit": "7de67f73997a865573d91b611ade2c8d2208e2cc", "tree": "2b27e03baa32c8edc99e8667d7376760e2551361", "parents": [ "565e08a85ae2bea8976d669e49cdb0fadbcb0b7d", "3e8c3bf6cb80d5356731d039f5feaeb767caec35" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 17 06:33:57 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Feb 17 06:33:57 2012 -0800" }, "message": "Merge \"mtd: Collect bad block count for ecc stats lazily.\" into msm-3.0" }, { "commit": "565e08a85ae2bea8976d669e49cdb0fadbcb0b7d", "tree": "ca1d6e02c9b7f95e723b235db793678c4642d07d", "parents": [ "5e37e99609bcaed1ea1942942339867f73e3de2e", "bb8ef8639de1914e53f8c2a84fa4bd1ee153453e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 17 06:33:57 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Feb 17 06:33:57 2012 -0800" }, "message": "Merge \"msm: camera: Add I2C mux control driver\" into msm-3.0" }, { "commit": "8fd0b76d63e7fdc7ef426065bd2821d556093770", "tree": "323cca00d775bd5e13649895212fe3b7db5c4b3f", "parents": [ "0671cef85373baf584ccdfa93c8f7d9be98f71c9", "a4036e1a530eaa235c01c4eceadf48379964c8a4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 17 06:33:57 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Feb 17 06:33:57 2012 -0800" }, "message": "Merge \"vidc: Fix for release of secure session.\" into msm-3.0" }, { "commit": "0671cef85373baf584ccdfa93c8f7d9be98f71c9", "tree": "0c3c98dec715fc934f3e36531b473804c6d68e98", "parents": [ "f3db68b37a5f398f88d07ab43a5b8c3c9b77c75e", "63f7166e6947935ab6dc2ba07382b0c7dc27f7e8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 17 06:33:57 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Feb 17 06:33:57 2012 -0800" }, "message": "Merge \"power: pm8921-charger: Report DC charging to userspace\" into msm-3.0" }, { "commit": "db8b451549c336438dc67893bf3e6524cff93b70", "tree": "96f1da47ab230f23ec460ca344bc99526fed3b53", "parents": [ "4b0c166ad68147bb99f92e50cb6d0ae8b3a1cd68", "2c820e1789cb489ce8b11a39fc83120772552fd4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 17 04:10:28 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Feb 17 04:10:28 2012 -0800" }, "message": "Merge \"msm: Set correct peak current requirement for 8901_s4 smps\" into msm-3.0" }, { "commit": "ac81a3345106740ca8c3a5763ddd2732e5752273", "tree": "60592bb79db31c9d2ac39b4d565e0f3b4fa67b3f", "parents": [ "dd30927838a09fb40c11544c0229fd46de2d9c88", "3b6551e3642301c92a1c96a70c4905da87b268ec" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 17 02:22:45 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Feb 17 02:22:45 2012 -0800" }, "message": "Merge changes I31048cd5,Id4f21af9 into msm-3.0\n\n* changes:\n msm_fb: display: Add supported MIPI panels to LVDS/MIPI detect config\n msm: display: Use LVDS/MIPI panel detect config for auto-detection\n" }, { "commit": "dd30927838a09fb40c11544c0229fd46de2d9c88", "tree": "6a4debc6b57dd3c06baeece4dbbd4af17ecbcb11", "parents": [ "76a4248cae28cc8eea289d07779319101834a84d", "7df0db653e9249799687dd0024360ff3fbba9c1e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 17 02:22:45 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Feb 17 02:22:45 2012 -0800" }, "message": "Merge \"camera: Correct call to wait_event_interruptible_timeout.\" into msm-3.0" }, { "commit": "7e60fb51dd97ac36a75b959217399e86d48a67ec", "tree": "4dad87048b2c33d1046cf782e572d8a867d7499d", "parents": [ "3def58f35a8286b87ef6c483801f86f998bc7082", "d7185f60b02879c6b07293380a505791add19752" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 17 00:09:55 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Feb 17 00:09:55 2012 -0800" }, "message": "Merge \"msm_fb: display: add mixer2 writeback userspace support\" into msm-3.0" }, { "commit": "89456b3a5ad909f83a1882ff984e300190377ce7", "tree": "696cdd8c93ef5ca6c566b68f5d6c5a44703ee815", "parents": [ "ebc05fb1bb1ad656001537f3930acc492cd93289", "23fa9e7a958be09f9d6743cea026a4f56b84a48f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 17 00:09:55 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Feb 17 00:09:55 2012 -0800" }, "message": "Merge \"msm_fb: display: set mdp perf_level to low level after playing video\" into msm-3.0" }, { "commit": "3b9595f629805408d572892227091cd1b42560fd", "tree": "22dc5e0f3f82abed58bbae8e3cbdb631701da2ca", "parents": [ "ad5689edc1b39ad2bb1074d27716b004ceb98993" ], "author": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Wed Feb 08 16:36:03 2012 +0530" }, "committer": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Fri Feb 17 12:58:14 2012 +0530" }, "message": "msm_fb: hdmi: Fix for EDID parser error.\n\nFor an older TV, which doesn\u0027t contain Data Block Collection,\nthe EDID parser was parsing wrong supported video resolutions.\nAs per EDID standard, if EDID block 1 byte 2 is 0x04, it means\nthere is no DBC available in EDID so the supported video resolutions\nshould be read from DTDs of block0 and block1 instead of SVD of\nDBC. Reading DTDs for supported video resolutions instead of DBC for\nbyte 2 being 0x04 case, fixed the issue.\n\nCRs-fixed: 332148\nChange-Id: I637b91059952b63029cf4f05f750c340bdfa37a6\nSigned-off-by: Ajay Singh Parmar \u003caparmar@codeaurora.org\u003e\n" }, { "commit": "4e1bd3108c8532d630d8470a22b474acfdc790e2", "tree": "75b0c758e712fcb256bc39617b2a5444850ade49", "parents": [ "ad5689edc1b39ad2bb1074d27716b004ceb98993" ], "author": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Thu Feb 16 19:33:05 2012 -0800" }, "committer": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Thu Feb 16 21:13:06 2012 -0800" }, "message": "diag: Avoid partial packet reads\n\nDIAG driver talks to peripheral processors over SMD channels.\nSometimes, SMD channel can have a partial packet and if diag\nreads it, it can mistake them as garbled packets. With this\nchange, if the packet is incomplete, diag will not read it\nand wait until the packet is complete.\n\nThis approach will work, as long as, peripheral is sending packets\nless than 1000 bytes. Currently even the peripheral is limited to\nsending packets upto 1K bytes, so this limitation is fine.\n\nAlso fix potential memory allocation failure and unnecessary\nreading from SMD channels.\n\nChange-Id: I86e6aa202d1e1159e7b3f099cb1228530489a370\nSigned-off-by: Shalabh Jain \u003cshalabhj@codeaurora.org\u003e\n" }, { "commit": "dfcb1b99c0bfab3b54c411f9e4b7c8a37ef2cbd1", "tree": "55768ed1999b16abdb95229beca5a81fbb43f10e", "parents": [ "86759db53b738cc85543590781e30292bd852f07", "f3c829c695e1313aa2ce7207f98dcdf123bdb6c0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 16 16:18:40 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Feb 16 16:18:40 2012 -0800" }, "message": "Merge changes I73bb32d0,I037fefc9 into msm-3.0\n\n* changes:\n copper: Add board and device tree support for the SPMI driver\n spmi: Add MSM PMIC Arbiter SPMI controller\n" }, { "commit": "6ea52a594800e481f5b8fa25762613d757aced6e", "tree": "6b9a73531b9ef52d197b9eff43647401e2b7bc68", "parents": [ "ba51016da5c2306bf2e1ec3ffbe4cac6c12c1dfd", "f50076b757c85b2249aa57ba5c09d44be70da6a9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 16 16:18:40 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Feb 16 16:18:40 2012 -0800" }, "message": "Merge \"diag: Add sanity check for data\" into msm-3.0" }, { "commit": "3d657d7222d79f77f532743e79264f8f16f48846", "tree": "f20eaa45376186787c091ae243a5f5207d12bd96", "parents": [ "73b9937715dcd97da0281b3b1355611b3273b949", "4b39262ad736edd181343fdd6e6905b65432922a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 16 13:55:27 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Feb 16 13:55:27 2012 -0800" }, "message": "Merge \"pmem: Allocate physical memory from reserved fmem\" into msm-3.0" }, { "commit": "73b9937715dcd97da0281b3b1355611b3273b949", "tree": "e1a98357ac735c7ba3fff222e380f110e7105a41", "parents": [ "81cfe2f0762a1246bf488e72253319d8fe821a3c", "caeaa929acb1e593ceb5f10ea041fe12ff4395e1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 16 13:55:27 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Feb 16 13:55:27 2012 -0800" }, "message": "Merge \"thermal: msm8960_tsens: Add APQ8064 support\" into msm-3.0" }, { "commit": "81cfe2f0762a1246bf488e72253319d8fe821a3c", "tree": "9d3eeca8f336fe4e303575e0992acb0441b97339", "parents": [ "5d7b0d546cf1510e9456cbcf0c593fb52a97995a", "6878b6d4520c1fe9f4e015e02a0495e59e17657c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 16 13:55:27 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Feb 16 13:55:27 2012 -0800" }, "message": "Merge \"msm: camera: Add registers to config RDI interfaces in vfe for 8960\" into msm-3.0" }, { "commit": "63f7166e6947935ab6dc2ba07382b0c7dc27f7e8", "tree": "4bcfe2d09c9a9e62b3e58936c86ebdbeb044f5c2", "parents": [ "9621cd122c591042b7263bdfefa46d9f5c257449" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Wed Feb 08 20:30:00 2012 -0800" }, "committer": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Thu Feb 16 13:48:42 2012 -0800" }, "message": "power: pm8921-charger: Report DC charging to userspace\n\nWhen the secondary charging path is being used without an external\ncharger report the charging status based upon the DCIN_VALID_IRQ.\n\nChange-Id: I4a992e9f6344588249bd1855cbaae24b0e97a601\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n" }, { "commit": "36d8ccd620799d2ad224f22a4c4c34c0256e1d08", "tree": "e9fddd36d843bd6a03415215c27c65e267c9e767", "parents": [ "da07f66d6b4a81c314331a4261cd2b400f72c64b" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Fri Feb 10 11:53:49 2012 -0800" }, "committer": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Thu Feb 16 13:47:16 2012 -0800" }, "message": "msm_fb: display: Add DSI Video Toshiba WUXGA(1920x1200) panel support\n\nAdd DSI Video Toshiba WUXGA(1920x1200) panel support using DSI Toshiba\nWSVGA bridge chip for controlling panel\n\nChange-Id: I36de195a0f86acd5415f2c6a0c4f0cfe050512bb\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\n" }, { "commit": "5d7b0d546cf1510e9456cbcf0c593fb52a97995a", "tree": "1f94293118d4da547b96d41047119c0ba6a93bb8", "parents": [ "07707d53d21b1fa85902a00b6fd0530da5c2c388", "51c0e6541a6eab7510def11804fb0b379d093b89" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 16 11:51:21 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Feb 16 11:51:22 2012 -0800" }, "message": "Merge \"msm: video: Update macros to use readl/writel\" into msm-3.0" }, { "commit": "07707d53d21b1fa85902a00b6fd0530da5c2c388", "tree": "3c91e7b03aea4eb3a229b8aa640c4e2d565ad53d", "parents": [ "9f5da2156f09e16671d42813480a7aad4a9b1996", "cd4b6daee36c5cf0064fe777b4d00cabadbe1c2e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 16 11:51:21 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Feb 16 11:51:22 2012 -0800" }, "message": "Merge \"ASoC: wcd9310: Add the support to instantiate codec driver.\" into msm-3.0" }, { "commit": "d803a63cbc771e1685f976e2964a16a0468c8bb0", "tree": "334fc0bacb506031cc55acc8501e1c446c2bba41", "parents": [ "6cf8a749e2354cf09e564dfa8104f706dca9b437" ], "author": { "name": "Sunid Wilson", "email": "sunidw@codeaurora.org", "time": "Thu Feb 16 00:17:43 2012 -0800" }, "committer": { "name": "Sunid Wilson", "email": "sunidw@codeaurora.org", "time": "Thu Feb 16 11:38:39 2012 -0800" }, "message": "msm: camera: Fix crash issue while enabling regular stats\n\nUpdate the AEC, AWB, AF, HIST and RS/CS buffers and fds\nbefore passing the stats message to the upper layer\n\nChange-Id: I98b03638ea27669263cd11798ca2af8dda6a98df\nSigned-off-by: Sunid Wilson \u003csunidw@codeaurora.org\u003e\n" }, { "commit": "23fa9e7a958be09f9d6743cea026a4f56b84a48f", "tree": "abb20349fbc5222b224495a15474a6bc6250aec5", "parents": [ "9621cd122c591042b7263bdfefa46d9f5c257449" ], "author": { "name": "Huaibin Yang", "email": "huaibiny@codeaurora.org", "time": "Tue Jan 31 10:31:53 2012 -0800" }, "committer": { "name": "Huaibin Yang", "email": "huaibiny@codeaurora.org", "time": "Thu Feb 16 11:24:05 2012 -0800" }, "message": "msm_fb: display: set mdp perf_level to low level after playing video\n\nThis bug fix sets mdp clk rate back to the rate for UI after playing\nvideo to save power.\n\nChange-Id: I73a0db158536b27a4a50d25b7737db4327210b8f\nSigned-off-by: Huaibin Yang \u003chuaibiny@codeaurora.org\u003e\n" }, { "commit": "a4036e1a530eaa235c01c4eceadf48379964c8a4", "tree": "a6b5a4e59d719fb41c9747a2c6a785bd9bf433ac", "parents": [ "6e53da890bbb130b6326394a58c6fe9d965c01eb" ], "author": { "name": "Deepak Kotur", "email": "dkotur@codeaurora.org", "time": "Mon Feb 13 12:28:45 2012 -0800" }, "committer": { "name": "Deepak Kotur", "email": "dkotur@codeaurora.org", "time": "Thu Feb 16 11:15:34 2012 -0800" }, "message": "vidc: Fix for release of secure session.\n\nWhen the video driver is released ,the memory is un protected\nby calling the unsecure heap API, It was observed that\nsometimes when the memory is unprotected without closing\nthe device the video core was not responding, after testing\nit was found the call sequence of unprotecting and closing\nof the video driver was not proper, hence first close the\nvideo driver and then un protect the memory.\n\nChange-Id: I35bd2b18281d78eb8ff91925f5b989282c2b5603\nSigned-off-by: Deepak Kotur \u003cdkotur@codeaurora.org\u003e\n" }, { "commit": "65a5ad2f186b376243405ec08e369a7d48060972", "tree": "f338d6ea0ecd2d0d50a56ad1be5bfcff11fee0de", "parents": [ "9621cd122c591042b7263bdfefa46d9f5c257449" ], "author": { "name": "Kenneth Heitke", "email": "kheitke@codeaurora.org", "time": "Wed Feb 08 14:00:04 2012 -0700" }, "committer": { "name": "Kenneth Heitke", "email": "kheitke@codeaurora.org", "time": "Thu Feb 16 06:19:12 2012 -0700" }, "message": "spmi: Add MSM PMIC Arbiter SPMI controller\n\nQualcomm\u0027s PMIC Arbiter SPMI controller functions as a bus master and\nis used to communication with one or more PMIC (slave) devices on the\nSPMI bus. The PMIC Arbiter is actually a hardware wrapper around the\nSPMI controller that provides concurrent and autonomous PMIC access\nto various entities that need to communicate with the PMIC.\n\nThe SPMI controller hardware handles all of the SPMI bus activity (bus\narbitration, sequence start condition, transmission of frames, etc).\nThis software driver uses the PMIC Arbiter register interface to\ninitiate command sequences on the SPMI bus. The status register is\nread to determine when the command sequence has completed and whether\nor not it completed successfully.\n\nRequest Capable Slave (RCS) devices can initiate a master write\ncommand sequence on the SPMI bus that the can be decoded by the\nbus master and used to generate interrupts.\n\nChange-Id: I037fefc946ccb5b8e0b04da856a3a96effe1c7e4\nSigned-off-by: Kenneth Heitke \u003ckheitke@codeaurora.org\u003e\n" }, { "commit": "9621cd122c591042b7263bdfefa46d9f5c257449", "tree": "7d1bfd0a750306b8a11a471feb422c5473aff20f", "parents": [ "55af88035a055c87e146f454597081332f095142", "57e30678c19f540108d99e81fb03fdaa86105d95" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 16 04:54:57 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Feb 16 04:54:57 2012 -0800" }, "message": "Merge \"msm_fb: display: Featurize pm operations for external display\" into msm-3.0" }, { "commit": "55af88035a055c87e146f454597081332f095142", "tree": "6b77a3e611008a71a7350775c573b9f5a04eeb63", "parents": [ "93efa96db6c0a733b5851c36bdca0a6eff026daf", "ee44ade0261441a62d4472ec02a302731d4b5b82" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 16 04:54:57 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Feb 16 04:54:57 2012 -0800" }, "message": "Merge \"spmi: Linux driver framework for SPMI\" into msm-3.0" }, { "commit": "759282fbd45f84357d0cf9fd67f8585f1a35c8b2", "tree": "0553008489aea739bb86066e7928fa7ef281659e", "parents": [ "1193c68c5ec688b57e5294240f13910133acc114", "2da4f9b57c95b0369d9b3b5c9f3e5d0626867050" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 16 04:54:57 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Feb 16 04:54:57 2012 -0800" }, "message": "Merge \"mfd: pm8921-core: Correct PMIC PM8917 revision register value\" into msm-3.0" }, { "commit": "1193c68c5ec688b57e5294240f13910133acc114", "tree": "0ac18046008e7b0010c09ed2d60392dac5a476f1", "parents": [ "4b0c548f4ef5867308e3418fc727f952bfa5c859", "28b1bac30e2079cb5e41a6f72ed94d3968ffbbfb" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 16 04:54:57 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Feb 16 04:54:57 2012 -0800" }, "message": "Merge \"USB: msm: Use new clock framework APIs\" into msm-3.0" } ], "next": "bb8ef8639de1914e53f8c2a84fa4bd1ee153453e" }