)]}' { "log": [ { "commit": "b1c1df7a7d50bf94de89704e963467bc94b1fef9", "tree": "be95cd2ed5cc248ac22cb31f3e6da382b135f41f", "parents": [ "e68273baf30390e9c907831b47384085c7f664d5" ], "author": { "name": "Balaji T K", "email": "balajitk@ti.com", "time": "Mon May 30 19:55:34 2011 +0530" }, "committer": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Wed Jun 01 02:25:04 2011 -0700" }, "message": "ARM: OMAP4: MMC: no regulator off during probe for eMMC\n\neMMC does not handle power off when not in sleep state,\nSkip regulator disable during probe when eMMC is\nnot in known state - state left by bootloader.\n\nResolves eMMC failure on OMAP4\nmmc0: error -110 whilst initialising MMC card\n\nSigned-off-by: Balaji T K \u003cbalajitk@ti.com\u003e\nTested-by: Kishore Kadiyala \u003ckishore.kadiyala@ti.com\u003e\nAcked-by: Kishore Kadiyala \u003ckishore.kadiyala@ti.com\u003e\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\n" }, { "commit": "e68273baf30390e9c907831b47384085c7f664d5", "tree": "1ca8c222c6438c474f294190f3992e2985d894fe", "parents": [ "03b562d7859c6d7c640f071b422d521146471d6d" ], "author": { "name": "Igor Grinberg", "email": "grinberg@compulab.co.il", "time": "Wed May 04 18:04:55 2011 +0300" }, "committer": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Wed Jun 01 02:25:04 2011 -0700" }, "message": "arm: omap2plus: fix ads7846 pendown gpio request\n\nintroduced by: 96974a24\n(omap: consolidate touch screen initialization among different boards)\n\nads7846 driver can use either gpio_pendown or get_pendown_state()\ncallback. In case of gpio_pendown, it requests the provided gpio_pendown\nthus resulting in double requesting that gpio:\n\nads7846 spi1.0: failed to request pendown GPIO57\nads7846: probe of spi1.0 failed with error -16\n\nFix this by restricting the gpio request to the case of\nget_pendown_state() callback is used.\n\nSigned-off-by: Igor Grinberg \u003cgrinberg@compulab.co.il\u003e\nTested-by: Thomas Weber \u003cweber@corscience.de\u003e\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\n" }, { "commit": "03b562d7859c6d7c640f071b422d521146471d6d", "tree": "0117319ba7b8fa79b9e60240cbab2567f0992358", "parents": [ "21a42c92750446008dc0847a78aba5459e3b6b5a" ], "author": { "name": "Todd Poynor", "email": "toddpoynor@google.com", "time": "Thu May 26 12:25:53 2011 -0700" }, "committer": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Wed Jun 01 02:25:04 2011 -0700" }, "message": "ARM: OMAP2: Add missing iounmap in omap4430_phy_init\n\n!dev case needs iounmap before return.\n\nSigned-off-by: Todd Poynor \u003ctoddpoynor@google.com\u003e\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\n" }, { "commit": "21a42c92750446008dc0847a78aba5459e3b6b5a", "tree": "640f9e7118a0af661a851ec45f8e3c3926a403d8", "parents": [ "d4ff6121b44081601206980cafcd6ed3ecb367b6" ], "author": { "name": "Colin Cross", "email": "ccross@android.com", "time": "Wed May 04 14:57:57 2011 -0700" }, "committer": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Wed Jun 01 02:25:04 2011 -0700" }, "message": "ARM: omap4: Pass core and wakeup mux tables to omap4_mux_init\n\nOMAP4 contains two separate instances of the padconf registers,\none in the core system config and one in the wakeup system config.\nPass in two tables to apply the correct values to each instance.\n\nSigned-off-by: Colin Cross \u003cccross@android.com\u003e\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\n" }, { "commit": "d4ff6121b44081601206980cafcd6ed3ecb367b6", "tree": "a16b0f82954e8eb37792dcf3065afbddecb39a78", "parents": [ "1499f2dbafafe844e485ff8945f60cd9f3d5cbd9" ], "author": { "name": "Colin Cross", "email": "ccross@android.com", "time": "Tue May 31 12:00:09 2011 -0700" }, "committer": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Wed Jun 01 02:25:04 2011 -0700" }, "message": "ARM: omap2+: mux: Allow board mux settings to be NULL\n\nOMAP4 has two mux instances, and the board may not have settings\nfor one of them. Allow the board file to pass NULL for an\ninstance\u0027s mux settings, which will initialize the mux instance\nbut skip writing board settings.\n\nSigned-off-by: Colin Cross \u003cccross@android.com\u003e\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\n" }, { "commit": "1499f2dbafafe844e485ff8945f60cd9f3d5cbd9", "tree": "8a38961346fb13a223a67d50db927862220484e1", "parents": [ "50b4860d577b4bef76c71ad38ef83b9f368283c2" ], "author": { "name": "Rabin Vincent", "email": "rabin@rab.in", "time": "Sat May 07 22:28:47 2011 +0530" }, "committer": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Wed Jun 01 02:25:04 2011 -0700" }, "message": "OMAP4: fix return value of omap4_l3_init\n\nDon\u0027t PTR_ERR() a non-error pointer:\n\n initcall omap4_l3_init+0x0/0xdc returned -544980480 after 0 usecs\n initcall omap4_l3_init+0x0/0xdc returned with error code -544980480\n\nSigned-off-by: Rabin Vincent \u003crabin@rab.in\u003e\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\n" }, { "commit": "50b4860d577b4bef76c71ad38ef83b9f368283c2", "tree": "11df5169b673bc5fed55042a205813c3e799c618", "parents": [ "77f7059a329fc8a514bbcc2f204aaa7c150e8046" ], "author": { "name": "Omar Ramirez Luna", "email": "omar.ramirez@ti.com", "time": "Fri Mar 25 14:04:31 2011 -0600" }, "committer": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Wed Jun 01 02:25:04 2011 -0700" }, "message": "OMAP: iovmm: fix SW flags passed by user\n\nCommit d038aee24dcd5a2a0d8547f5396f67ae9698ac8e\n\"omap: iovmm: don\u0027t check \u0027da\u0027 to set IOVMF_DA_FIXED flag\",\nchanges iovmm to receive flags specified by user, however\nthe upper 16 bits of the flags are wiped by iovmm itself.\n\nThis fixes IOVMF_DA_FIXED flags from being lost, and lets the user\nmap its desired \"device addresses\".\n\nSigned-off-by: Omar Ramirez Luna \u003comar.ramirez@ti.com\u003e\nAcked-by: Hiroshi DOYU \u003cHiroshi.DOYU@nokia.com\u003e\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\n" }, { "commit": "77f7059a329fc8a514bbcc2f204aaa7c150e8046", "tree": "a75f324b69a310e5e240e4f6cdec76b3b78e9b1f", "parents": [ "30ebad9d756a0b2c97c6c4ca6c5e6b799e3b64da" ], "author": { "name": "Julia Lawall", "email": "julia@diku.dk", "time": "Fri May 13 18:46:10 2011 +0200" }, "committer": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Wed Jun 01 02:25:04 2011 -0700" }, "message": "arch/arm/mach-omap1/dma.c: Invert calls to platform_device_put and platform_device_del\n\nPlatform_device_del should be called before platform_device_put, as\nplatform_device_put can delete the structure.\n\nAdditionally, improve the error handling code for the call to ioremap, so\nthat it calls platform_device_put.\n\nThe semantic match that finds this problem is:\n(http://coccinelle.lip6.fr/)\n\n// \u003csmpl\u003e\n@@\nexpression e1,e2;\n@@\n\n*platform_device_put(e1);\n... when !\u003d e1 \u003d e2\n*platform_device_del(e1);\n// \u003c/smpl\u003e\n\nSigned-off-by: Julia Lawall \u003cjulia@diku.dk\u003e\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\n" }, { "commit": "30ebad9d756a0b2c97c6c4ca6c5e6b799e3b64da", "tree": "f3119d9d84eb191e3d84d2ef1f40ad4c52ebc73e", "parents": [ "26a510ba12448d3af26951376eae202bee8cdf65" ], "author": { "name": "Govindraj.R", "email": "govindraj.raja@ti.com", "time": "Wed Jun 01 11:28:56 2011 +0530" }, "committer": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Wed Jun 01 00:16:04 2011 -0700" }, "message": "OMAP2+: mux: fix compilation warnings\n\nFix below compilation warnings.\n\narch/arm/mach-omap2/omap_hwmod.c: In function \u0027omap_hwmod_for_each\u0027:\narch/arm/mach-omap2/omap_hwmod.c:1631: warning: \u0027ret\u0027 may be used uninitialized in this function\n\narch/arm/mach-omap2/mux.c: In function \u0027omap_mux_get_gpio\u0027:\narch/arm/mach-omap2/mux.c:917: warning: \u0027m\u0027 may be used uninitialized in this function\n\nSigned-off-by: Govindraj.R \u003cgovindraj.raja@ti.com\u003e\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\n" }, { "commit": "26a510ba12448d3af26951376eae202bee8cdf65", "tree": "13a344cc93dde21a456c51b3c6ce6218d37e103f", "parents": [ "026fe79d75c3a7a257ca72250f46b472835784c9" ], "author": { "name": "Santosh Shilimkar", "email": "santosh.shilimkar@ti.com", "time": "Mon Apr 04 14:20:08 2011 +0530" }, "committer": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Tue May 31 06:17:02 2011 -0700" }, "message": "OMAP: SRAM: Fix warning: format \u0027%08lx\u0027 expects type \u0027long unsigned int\u0027\n\nFix below build warning.\n\n CC\tarch/arm/plat-omap/sram.o\n\tarch/arm/plat-omap/sram.c: In function \u0027omap_map_sram\u0027:\n\tarch/arm/plat-omap/sram.c:224: warning: format \u0027%08lx\u0027 expects\n\ttype \u0027long unsigned int\u0027, but argument 2 has type \u0027unsigned int\u0027\n\nWhile at this, convert SRAM printk(* \"\") to pr_*(\"\").\n\nSigned-off-by: Santosh Shilimkar \u003csantosh.shilimkar@ti.com\u003e\nAcked-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\n" }, { "commit": "026fe79d75c3a7a257ca72250f46b472835784c9", "tree": "022c3581f0cce5cc5f05acad8258da2ba0dfaf23", "parents": [ "89c4705ed58a9e6faa7649eb561aead79bb77b3f" ], "author": { "name": "Igor Grinberg", "email": "grinberg@compulab.co.il", "time": "Mon May 30 00:11:45 2011 -0700" }, "committer": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Tue May 31 06:17:02 2011 -0700" }, "message": "arm: omap3: cm-t3517: fix section mismatch warning\n\nWARNING: arch/arm/mach-omap2/built-in.o(.text+0x11014): Section mismatch\nin reference from the function cm_t3517_init_usbh() to the (unknown\nreference) .init.data:(unknown)\nThe function cm_t3517_init_usbh() references\nthe (unknown reference) __initdata (unknown).\nThis is often because cm_t3517_init_usbh lacks a __initdata\nannotation or the annotation of (unknown) is wrong.\n\nSigned-off-by: Igor Grinberg \u003cgrinberg@compulab.co.il\u003e\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\n" }, { "commit": "89c4705ed58a9e6faa7649eb561aead79bb77b3f", "tree": "bc491ff3fe66dcd47fee96f7b6ca54bb7ce4b968", "parents": [ "f9fa1bb9d7a3c9537d6abd4ad47c58fe27862625" ], "author": { "name": "Santosh Shilimkar", "email": "santosh.shilimkar@ti.com", "time": "Mon May 30 00:11:45 2011 -0700" }, "committer": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Tue May 31 06:17:02 2011 -0700" }, "message": "OMAP2+: Fix 9 section mismatch(es) warnings from mach-omap2/built-in.o\n\nThe serial*_data should have been marked as __initdata as per\nit\u0027s usage in the board files. Fix the same to remove the\nsection mismatch warnings caused by it.\n\nSigned-off-by: Santosh Shilimkar \u003csantosh.shilimkar@ti.com\u003e\nSigned-off-by: Silesh C V \u003csilesh@ti.com\u003e\n[tony@atomide.com: updated with additional fixes from Silesh]\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\n" }, { "commit": "f9fa1bb9d7a3c9537d6abd4ad47c58fe27862625", "tree": "d890b482f58a3be007fade2980610900851cd33e", "parents": [ "046d886db18260d4435c942985392b7ef872337f" ], "author": { "name": "Axel Lin", "email": "axel.lin@gmail.com", "time": "Tue May 31 20:55:44 2011 +0800" }, "committer": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Tue May 31 06:17:01 2011 -0700" }, "message": "ARM: OMAP2: Add missing include of linux/gpio.h\n\nI got some build error like below while executing \"make omap2plus_defconfig\".\n\n CC arch/arm/mach-omap2/board-2430sdp.o\narch/arm/mach-omap2/board-2430sdp.c: In function \u0027omap_2430sdp_init\u0027:\narch/arm/mach-omap2/board-2430sdp.c:247: error: \u0027GPIOF_OUT_INIT_LOW\u0027 undeclared (first use in this function)\narch/arm/mach-omap2/board-2430sdp.c:247: error: (Each undeclared identifier is reported only once\narch/arm/mach-omap2/board-2430sdp.c:247: error: for each function it appears in.)\n\nThis patch fixes the build error by include linux/gpio.h instead of mach/gpio.h.\n\nSigned-off-by: Axel Lin \u003caxel.lin@gmail.com\u003e\nCc: Syed Mohammed Khasim \u003cx0khasim@ti.com\u003e\nCc: Grazvydas Ignotas \u003cnotasas@gmail.com\u003e\nCc: Steve Sakoman \u003csteve@sakoman.com\u003e\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\n" }, { "commit": "046d886db18260d4435c942985392b7ef872337f", "tree": "8e85afc66a289ffa04b6a448dcd3291f82cdd5d1", "parents": [ "55922c9d1b84b89cb946c777fddccb3247e7df2c" ], "author": { "name": "Janusz Krzysztofik", "email": "jkrzyszt@tis.icnet.pl", "time": "Tue May 31 00:44:31 2011 +0200" }, "committer": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Tue May 31 06:17:01 2011 -0700" }, "message": "OMAP: fix compilation error\n\nForward-declare platform_device structure in\narch/arm/plat-omap/include/plat/flash.h, otherwise compilation may break\nwith:\n\nIn file included from arch/arm/mach-omap1/flash.c:15:\narch/arm/plat-omap/include/plat/flash.h:14: warning: \u0027struct platform_device\u0027 declared inside parameter list\narch/arm/plat-omap/include/plat/flash.h:14: warning: its scope is only this definition or declaration, which is probably not what you want\narch/arm/mach-omap1/flash.c:16: warning: \u0027struct platform_device\u0027 declared inside parameter list\narch/arm/mach-omap1/flash.c:17: error: conflicting types for \u0027omap1_set_vpp\u0027\narch/arm/plat-omap/include/plat/flash.h:14: error: previous declaration of \u0027omap1_set_vpp\u0027 was here\n\nDetected and corrected while building for Amstrad Delta, confirmed with\nomap1_defconfig.\n\nSigned-off-by: Janusz Krzysztofik \u003cjkrzyszt@tis.icnet.pl\u003e\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\n" }, { "commit": "04830fccdcafa7e0ea913990ae56437253553fef", "tree": "16d423628a516f544a0e5bb8fd4f00d88a55395f", "parents": [ "571503e10045c89af951962ea0bb783482663aad", "1486a7409b42ec434be310e091ef68660a2f6cd0" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat May 28 10:56:34 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat May 28 10:56:34 2011 -0700" }, "message": "Merge branch \u0027gpio/next\u0027 of git://git.secretlab.ca/git/linux-2.6\n\n* \u0027gpio/next\u0027 of git://git.secretlab.ca/git/linux-2.6:\n gpio/pch_gpio: Support new device ML7223\n gpio: make gpio_{request,free}_array gpio array parameter const\n GPIO: OMAP: move to drivers/gpio\n GPIO: OMAP: move register offset defines into \u003cplat/gpio.h\u003e\n gpio: Convert gpio_is_valid to return bool\n gpio: Move the s5pc100 GPIO to drivers/gpio\n gpio: Move the s5pv210 GPIO to drivers/gpio\n gpio: Move the exynos4 GPIO to drivers/gpio\n gpio: Move to Samsung common GPIO library to drivers/gpio\n gpio/nomadik: add function to read GPIO pull down status\n gpio/nomadik: show all pins in debug\n gpio: move Nomadik GPIO driver to drivers/gpio\n gpio: move U300 GPIO driver to drivers/gpio\n langwell_gpio: add runtime pm support\n gpio/pca953x: Add support for pca9574 and pca9575 devices\n gpio/cs5535: Show explicit dependency between gpio_cs5535 and mfd_cs5535\n" }, { "commit": "571503e10045c89af951962ea0bb783482663aad", "tree": "b24af1e4b5c67e2da940991b8219f8f8c4e7ac0a", "parents": [ "29a6ccca3869bbe33879dae0cd7df2a1559eff54", "7b21fddd087678a70ad64afc0f632e0f1071b092" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat May 28 10:51:01 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat May 28 10:51:01 2011 -0700" }, "message": "Merge branch \u0027setns\u0027\n\n* setns:\n ns: Wire up the setns system call\n\nDone as a merge to make it easier to fix up conflicts in arm due to\naddition of sendmmsg system call\n" }, { "commit": "7b21fddd087678a70ad64afc0f632e0f1071b092", "tree": "c3ee152ab9b57b6cbc1ee3c6fd495c704ec47f66", "parents": [ "14d74e0cab7a7779a7ff0c3863c04c8a8e507106" ], "author": { "name": "Eric W. Biederman", "email": "ebiederm@xmission.com", "time": "Fri May 27 19:28:27 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat May 28 10:48:39 2011 -0700" }, "message": "ns: Wire up the setns system call\n\n32bit and 64bit on x86 are tested and working. The rest I have looked\nat closely and I can\u0027t find any problems.\n\nsetns is an easy system call to wire up. It just takes two ints so I\ndon\u0027t expect any weird architecture porting problems.\n\nWhile doing this I have noticed that we have some architectures that are\nvery slow to get new system calls. cris seems to be the slowest where\nthe last system calls wired up were preadv and pwritev. avr32 is weird\nin that recvmmsg was wired up but never declared in unistd.h. frv is\nbehind with perf_event_open being the last syscall wired up. On h8300\nthe last system call wired up was epoll_wait. On m32r the last system\ncall wired up was fallocate. mn10300 has recvmmsg as the last system\ncall wired up. The rest seem to at least have syncfs wired up which was\nnew in the 2.6.39.\n\nv2: Most of the architecture support added by Daniel Lezcano \u003cdlezcano@fr.ibm.com\u003e\nv3: ported to v2.6.36-rc4 by: Eric W. Biederman \u003cebiederm@xmission.com\u003e\nv4: Moved wiring up of the system call to another patch\nv5: ported to v2.6.39-rc6\nv6: rebased onto parisc-next and net-next to avoid syscall conflicts.\nv7: ported to Linus\u0027s latest post 2.6.39 tree.\n\n\u003e  arch/blackfin/include/asm/unistd.h     |    3 ++-\n\u003e  arch/blackfin/mach-common/entry.S      |    1 +\nAcked-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\n\nOh - ia64 wiring looks good.\nAcked-by: Tony Luck \u003ctony.luck@intel.com\u003e\n\nSigned-off-by: Eric W. Biederman \u003cebiederm@xmission.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "1486a7409b42ec434be310e091ef68660a2f6cd0", "tree": "aea9fb012b3d7221a4b46f50a10edf809ee49f9a", "parents": [ "bc786ccead15262a12bd673ed7a5afa6cbf0edcf", "e5cdb13ff95e1400bc94d3e6610fc5e95be3b5b1" ], "author": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Fri May 27 23:52:58 2011 -0600" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Fri May 27 23:52:58 2011 -0600" }, "message": "Merge branch \u0027for_2.6.40/gpio-move\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into gpio/next\n" }, { "commit": "29a6ccca3869bbe33879dae0cd7df2a1559eff54", "tree": "2d9d355d8662ede95af7bc812d686dc4d5f37ff3", "parents": [ "426048313dfa7d65dbd2379b1665755511f9544f", "6a8a98b22b10f1560d5f90aded4a54234b9b2724" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri May 27 20:06:53 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri May 27 20:06:53 2011 -0700" }, "message": "Merge git://git.infradead.org/mtd-2.6\n\n* git://git.infradead.org/mtd-2.6: (97 commits)\n mtd: kill CONFIG_MTD_PARTITIONS\n mtd: remove add_mtd_partitions, add_mtd_device and friends\n mtd: convert remaining users to mtd_device_register()\n mtd: samsung onenand: convert to mtd_device_register()\n mtd: omap2 onenand: convert to mtd_device_register()\n mtd: txx9ndfmc: convert to mtd_device_register()\n mtd: tmio_nand: convert to mtd_device_register()\n mtd: socrates_nand: convert to mtd_device_register()\n mtd: sharpsl: convert to mtd_device_register()\n mtd: s3c2410 nand: convert to mtd_device_register()\n mtd: ppchameleonevb: convert to mtd_device_register()\n mtd: orion_nand: convert to mtd_device_register()\n mtd: omap2: convert to mtd_device_register()\n mtd: nomadik_nand: convert to mtd_device_register()\n mtd: ndfc: convert to mtd_device_register()\n mtd: mxc_nand: convert to mtd_device_register()\n mtd: mpc5121_nfc: convert to mtd_device_register()\n mtd: jz4740_nand: convert to mtd_device_register()\n mtd: h1910: convert to mtd_device_register()\n mtd: fsmc_nand: convert to mtd_device_register()\n ...\n\nFixed up trivial conflicts in\n - drivers/mtd/maps/integrator-flash.c: removed in ARM tree\n - drivers/mtd/maps/physmap.c: addition of afs partition probe type\n clashing with removal of CONFIG_MTD_PARTITIONS\n" }, { "commit": "2a56d2220284b0e4dd8569fa475d7053f1c40a63", "tree": "96f959486a2f31db599e5f97167074bd1ecb3dc6", "parents": [ "46f2cc80514e389bacfb642a32a4181fa1f1d20b", "239df0fd5ee25588f8a5ba7f7ee646940cc403f4" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri May 27 19:51:32 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri May 27 19:51:32 2011 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm\n\n* \u0027for-linus\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits)\n ARM: 6945/1: Add unwinding support for division functions\n ARM: kill pmd_off()\n ARM: 6944/1: mm: allow ASID 0 to be allocated to tasks\n ARM: 6943/1: mm: use TTBR1 instead of reserved context ID\n ARM: 6942/1: mm: make TTBR1 always point to swapper_pg_dir on ARMv6/7\n ARM: 6941/1: cache: ensure MVA is cacheline aligned in flush_kern_dcache_area\n ARM: add sendmmsg syscall\n ARM: 6863/1: allow hotplug on msm\n ARM: 6832/1: mmci: support for ST-Ericsson db8500v2\n ARM: 6830/1: mach-ux500: force PrimeCell revisions\n ARM: 6829/1: amba: make hardcoded periphid override hardware\n ARM: 6828/1: mach-ux500: delete SSP PrimeCell ID\n ARM: 6827/1: mach-netx: delete hardcoded periphid\n ARM: 6940/1: fiq: Briefly document driver responsibilities for suspend/resume\n ARM: 6938/1: fiq: Refactor {get,set}_fiq_regs() for Thumb-2\n ARM: 6914/1: sparsemem: fix highmem detection when using SPARSEMEM\n ARM: 6913/1: sparsemem: allow pfn_valid to be overridden when using SPARSEMEM\n at91: drop at572d940hf support\n at91rm9200: introduce at91rm9200_set_type to specficy cpu package\n at91: drop boot_params and PLAT_PHYS_OFFSET\n ...\n" }, { "commit": "239df0fd5ee25588f8a5ba7f7ee646940cc403f4", "tree": "bfece31a51ceec2793cb69b3ac1c936e0652bcbc", "parents": [ "cc780af5aca00d573eae0e926e1d4cf1439b580e", "ae1d3b974e091b5fc9008bd41bcbdaac68110b62", "81479c246c07b703aeb4bf54933b7d928cb5b717" ], "author": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Fri May 27 22:59:57 2011 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Fri May 27 22:59:57 2011 +0100" }, "message": "Merge branches \u0027devel\u0027, \u0027devel-stable\u0027 and \u0027fixes\u0027 into for-linus\n" }, { "commit": "81479c246c07b703aeb4bf54933b7d928cb5b717", "tree": "2ad7888a68ad944292c455d2ee4fc242bcc79a5c", "parents": [ "45b95235b0ac86cef2ad4480b0618b8778847479" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Fri May 27 17:23:16 2011 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Fri May 27 22:56:53 2011 +0100" }, "message": "ARM: 6945/1: Add unwinding support for division functions\n\nThe software division functions never had unwinding annotations\nadded. Currently, when a division by zero occurs the backtrace shown\nwill stop at Ldiv0 or some completely unrelated function. Add\nunwinding annotations in hopes of getting a more useful backtrace\nwhen a division by zero occurs.\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\nAcked-by: Dave Martin \u003cdave.martin@linaro.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "ea0ca3a843babd50c22dfbb5cf2d9a14df821b2b", "tree": "0d27fc6d7b9a0a2cdfe29833eb84ee07beac91ab", "parents": [ "74e6392ca3fd445a775dd42b54d5e42cf1e706e6", "906649de0eacde7a643b5a0750de6207441ad54f" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri May 27 10:12:35 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri May 27 10:12:35 2011 -0700" }, "message": "Merge git://git.infradead.org/battery-2.6\n\n* git://git.infradead.org/battery-2.6:\n PXA: Use dev_pm_ops in z2_battery\n ds2760_battery: Fix rated capacity of the hx4700 1800mAh battery\n ds2760_battery: Fix indexing of the 4 active full EEPROM registers\n power: Make test_power driver more dynamic.\n bq27x00_battery: Name of cycle count property\n max8903_charger: Add GENERIC_HARDIRQS as a dependency (fixes S390 build)\n ARM: RX-51: Enable isp1704 power on/off\n isp1704_charger: Allow board specific powering routine\n gpio-charger: Add gpio_charger_resume\n power_supply: Add driver for MAX8903 charger\n" }, { "commit": "e5cdb13ff95e1400bc94d3e6610fc5e95be3b5b1", "tree": "0421e5fc4819966c366fd68a6cdfc5f89422c430", "parents": [ "5ee1a81b84ee8b0bd0b4f8cdbac48b472863c1f2" ], "author": { "name": "Kevin Hilman", "email": "khilman@ti.com", "time": "Fri May 20 11:53:37 2011 +0200" }, "committer": { "name": "Kevin Hilman", "email": "khilman@ti.com", "time": "Fri May 27 08:43:34 2011 -0700" }, "message": "GPIO: OMAP: move to drivers/gpio\n\nMove OMAP GPIO driver to drivers/gpio. Builds whenever\nCONFIG_ARCH_OMAP\u003dy.\n\nSigned-off-by: Kevin Hilman \u003ckhilman@ti.com\u003e\n" }, { "commit": "5ee1a81b84ee8b0bd0b4f8cdbac48b472863c1f2", "tree": "e5c36eb9af2aa824f30f1c7dda84f2cfcc4f2fab", "parents": [ "9a55d9752d8abfc62f1ab05ccc790d22a0c8e7c0" ], "author": { "name": "Kevin Hilman", "email": "khilman@ti.com", "time": "Wed Apr 20 15:44:11 2011 -0700" }, "committer": { "name": "Kevin Hilman", "email": "khilman@ti.com", "time": "Fri May 27 08:43:34 2011 -0700" }, "message": "GPIO: OMAP: move register offset defines into \u003cplat/gpio.h\u003e\n\nRegister offset defines are moved to \u003cplat/gpio.h\u003e so they can be used\nby SoC-specific device init code to fill out platform_data register\noffsets.\n\nSigned-off-by: Kevin Hilman \u003ckhilman@ti.com\u003e\n" }, { "commit": "04b18ff9ca69545a2447462a65c7ba5373e23f69", "tree": "750ded98da86a30730b77d195e94bf6d271ffe99", "parents": [ "63e424c84429903c92a0f1e9654c31ccaf6694d0" ], "author": { "name": "Akinobu Mita", "email": "akinobu.mita@gmail.com", "time": "Thu May 26 16:26:11 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 26 17:12:38 2011 -0700" }, "message": "arm: use asm-generic/bitops/le.h\n\nThe previous style change enables to use asm-generic/bitops/le.h on arm.\n\nSigned-off-by: Akinobu Mita \u003cakinobu.mita@gmail.com\u003e\nAcked-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\nCc: Arnd Bergmann \u003carnd@arndb.de\u003e\nCc: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\nCc: Heiko Carstens \u003cheiko.carstens@de.ibm.com\u003e\nCc: Greg Ungerer \u003cgerg@uclinux.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "a2812e178321132811a53f7be40fe7e9bbffd9e0", "tree": "5e1ae6d683d964cce8b4f107d8032522ac69b372", "parents": [ "e0819410dba141338ebf6ab1057c1863be6247ab" ], "author": { "name": "Akinobu Mita", "email": "akinobu.mita@gmail.com", "time": "Thu May 26 16:26:06 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 26 17:12:38 2011 -0700" }, "message": "arch: add #define for each of optimized find bitops\n\nThe style that we normally use in asm-generic is to test the macro itself\nfor existence, so in asm-generic, do:\n\n\t#ifndef find_next_zero_bit_le\n\textern unsigned long find_next_zero_bit_le(const void *addr,\n\t\tunsigned long size, unsigned long offset);\n\t#endif\n\nand in the architectures, write\n\n\tstatic inline unsigned long find_next_zero_bit_le(const void *addr,\n\t\tunsigned long size, unsigned long offset)\n\t#define find_next_zero_bit_le find_next_zero_bit_le\n\nThis adds the #define for each of the optimized find bitops in the\narchitectures.\n\nSuggested-by: Arnd Bergmann \u003carnd@arndb.de\u003e\nSigned-off-by: Akinobu Mita \u003cakinobu.mita@gmail.com\u003e\nAcked-by: Hans-Christian Egtvedt \u003chans-christian.egtvedt@atmel.com\u003e\nAcked-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\nAcked-by: Greg Ungerer \u003cgerg@uclinux.org\u003e\nCc: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\nCc: Heiko Carstens \u003cheiko.carstens@de.ibm.com\u003e\nAcked-by: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "82ab0f75ee2f5defe300eadc91635aa455e01afd", "tree": "67bfe4855328c404246c288310294321d02a22db", "parents": [ "347ec4e47dd249c0620f429d8458fc42eed63e0e" ], "author": { "name": "Kyungmin Park", "email": "kyungmin.park@samsung.com", "time": "Mon May 23 17:27:58 2011 +0900" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Thu May 26 17:33:41 2011 -0600" }, "message": "gpio: Move the s5pc100 GPIO to drivers/gpio\n\nMove the Samsung s5pc100 SoC GPIO driver to drivers/gpio\n\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "347ec4e47dd249c0620f429d8458fc42eed63e0e", "tree": "f39843c7dba80b6a143bb1bbd89a06bf08d87550", "parents": [ "ab48f16137eb5a6fabcff4cc817319394fc0de7e" ], "author": { "name": "Kyungmin Park", "email": "kyungmin.park@samsung.com", "time": "Mon May 23 17:27:51 2011 +0900" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Thu May 26 17:33:37 2011 -0600" }, "message": "gpio: Move the s5pv210 GPIO to drivers/gpio\n\nMove the Samsung s5pv210 SoC GPIO driver to drivers/gpio\n\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "ab48f16137eb5a6fabcff4cc817319394fc0de7e", "tree": "47e63dd380ddaec18872a7e50b8563309a068717", "parents": [ "fed6a0224714bd414bff91833e0bd5775a3e9c66" ], "author": { "name": "Kyungmin Park", "email": "kyungmin.park@samsung.com", "time": "Mon May 23 17:27:45 2011 +0900" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Thu May 26 17:32:50 2011 -0600" }, "message": "gpio: Move the exynos4 GPIO to drivers/gpio\n\nMove the Samsung Exynos4 series SoCs GPIO driver to drivers/gpio\n\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "fed6a0224714bd414bff91833e0bd5775a3e9c66", "tree": "24019b4f2b596c802167cb4484186e20a545e206", "parents": [ "bc6f5cf6484a509cfe0533b8ddf8b8ca60f35557" ], "author": { "name": "Kyungmin Park", "email": "kyungmin.park@samsung.com", "time": "Mon May 23 17:27:38 2011 +0900" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Thu May 26 17:31:22 2011 -0600" }, "message": "gpio: Move to Samsung common GPIO library to drivers/gpio\n\nIt\u0027s common gpiolib for recent Samsung SoCs. Move to drivers/gpio\n\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "bc6f5cf6484a509cfe0533b8ddf8b8ca60f35557", "tree": "6129c19354abc14e1e3b6a8b0fec9e4a89ab3662", "parents": [ "8ea72a30a31c30ec7fa0c30c743b2cec0712d143" ], "author": { "name": "Rickard Andersson", "email": "rickard.andersson@stericsson.com", "time": "Tue May 24 23:07:17 2011 +0200" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Thu May 26 17:30:18 2011 -0600" }, "message": "gpio/nomadik: add function to read GPIO pull down status\n\nSigned-off-by: Rickard Andersson \u003crickard.andersson@stericsson.com\u003e\nReviewed-by: Martin Persson \u003cmartin.persson@stericsson.com\u003e\n[Split off from larger patch]\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "37d72457644a1ded37d57dd9ae664e4e228a034d", "tree": "a3fc8147452e79ae45b4b912ba5ab16161a0e2fa", "parents": [ "06caa7ad8341db2f03165fa763559475cc404584" ], "author": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Thu May 26 17:30:03 2011 -0600" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Thu May 26 17:30:03 2011 -0600" }, "message": "gpio: move Nomadik GPIO driver to drivers/gpio\n\nThis moves the Nomadik GPIO driver out of arch/arm/plat-nomadik\nand into the desired location indicated by the subsystem\nmaintainer.\n\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\n[grant.likely: squashed with kconfig fixup]\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e" }, { "commit": "06caa7ad8341db2f03165fa763559475cc404584", "tree": "c0ae571b12d30e66a9792d4914ff9ec86943e419", "parents": [ "7812803a3119f7cf375bd04bc019ce2395a7c2fc" ], "author": { "name": "Linus Walleij", "email": "linus.walleij@linaro.org", "time": "Tue May 24 23:06:52 2011 +0200" }, "committer": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Thu May 26 17:29:33 2011 -0600" }, "message": "gpio: move U300 GPIO driver to drivers/gpio\n\nThis moves the U300 GPIO driver out of arch/arm/mach-u300 and into\nthe desired location indicated by the subsystem maintainer.\n\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\n" }, { "commit": "9f1912c48ce829d24789e3e5d499de0d44d3306a", "tree": "056ca04727d478f74b20d8af5729e0776a942cca", "parents": [ "4c171acc20794af16a27da25e11ec4e9cad5d9fa", "099691081df40d8863cb2fb01ee64039633892dd" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 26 12:14:20 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 26 12:14:20 2011 -0700" }, "message": "Merge branch \u0027for-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6\n\n* \u0027for-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (57 commits)\n regulator: Fix 88pm8607.c printk format warning\n input: Add support for Qualcomm PMIC8XXX power key\n input: Add Qualcomm pm8xxx keypad controller driver\n mfd: Add omap-usbhs runtime PM support\n mfd: Fix ASIC3 SD Host Controller Configuration size\n mfd: Fix omap_usbhs_alloc_children error handling\n mfd: Fix omap usbhs crash when rmmoding ehci or ohci\n mfd: Add ASIC3 LED support\n leds: Add ASIC3 LED support\n mfd: Update twl4030-code maintainer e-mail address\n mfd: Correct the name and bitmask for ab8500-gpadc BTempPullUp\n mfd: Add manual ab8500-gpadc batt temp activation for AB8500 3.0\n mfd: Provide ab8500-core enumerators for chip cuts\n mfd: Check twl4030-power remove script error condition after i2cwrite\n mfd: Fix twl6030 irq definitions\n mfd: Add phoenix lite (twl6025) support to twl6030\n mfd: Avoid to use constraint name in 88pm860x regulator driver\n mfd: Remove checking on max8925 regulator[0]\n mfd: Remove unused parameter from 88pm860x API\n mfd: Avoid to allocate 88pm860x static platform data\n ...\n" }, { "commit": "829ae2732998e628d762b97627e4e5cc6c1b5625", "tree": "7ffdfa365ab54df4fd1742673289621b3f5de2f5", "parents": [ "6ddb4518c7af7b03fa322552d794f759cd5c26fa", "9b28b11e2a648f07c8481b9666ccf1c088e1ab74" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 26 12:11:54 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 26 12:11:54 2011 -0700" }, "message": "Merge branch \u0027omap-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6\n\n* \u0027omap-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (33 commits)\n OMAP3: PM: Boot message is not an error, and not helpful, remove it\n OMAP3: cpuidle: change the power domains modes determination logic\n OMAP3: cpuidle: code rework for improved readability\n OMAP3: cpuidle: re-organize the C-states data\n OMAP3: clean-up mach specific cpuidle data structures\n OMAP3 cpuidle: remove useless SDP specific timings\n usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled\n usb: otg: OMAP4430: Fixing the omap4430_phy_init function\n usb: musb: am35x: fix compile error when building am35x\n usb: musb: OMAP4430: Power down the PHY during board init\n omap: drop board-igep0030.c\n omap: igep0020: add support for IGEP3\n omap: igep0020: minor refactoring\n omap: igep0020: name refactoring for future merge with IGEP3\n omap: Remove support for omap2evm\n arm: omap2plus: GPIO cleanup\n omap: musb: introduce default board config\n omap: move detection of NAND CS to common-board-devices\n omap: use common initialization for PMIC i2c bus\n omap: consolidate touch screen initialization among different boards\n ...\n" }, { "commit": "cc780af5aca00d573eae0e926e1d4cf1439b580e", "tree": "0f064010d2935ec07737a10f63728ef36668b4d9", "parents": [ "1784b157c89cd2b5e6a3840abfdab6ed51f31d86" ], "author": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu May 26 19:50:30 2011 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu May 26 19:50:30 2011 +0100" }, "message": "ARM: kill pmd_off()\n\npmd_off() has only one user, so lets consolidate this into its only\nuser.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "d7ac829fa30d44d6553a0ead41f47bb92ee4d73e", "tree": "d189f6ab11a724c2430943cc6e76b16ec29d02b0", "parents": [ "1f968ff61f2987f500832e93b9b704f26adadea6" ], "author": { "name": "Lesly A M", "email": "leslyam@ti.com", "time": "Thu Apr 14 17:57:51 2011 +0530" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu May 26 19:45:23 2011 +0200" }, "message": "mfd: Modifying the twl4030-power macro name Main_Ref to all caps\n\nModifying the macro name Main_Ref to all caps(MAIN_REF).\n\nSuggested by Nishanth Menon \u003cnm@ti.com\u003e\n\nSigned-off-by: Lesly A M \u003cleslyam@ti.com\u003e\nCc: Nishanth Menon \u003cnm@ti.com\u003e\nCc: David Derrick \u003cdderrick@ti.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "45b95235b0ac86cef2ad4480b0618b8778847479", "tree": "e3c4de8439787133504306362fc7dac3947b456e", "parents": [ "52af9c6cd863fe37d1103035ec7ee22ac1296458" ], "author": { "name": "Will Deacon", "email": "will.deacon@arm.com", "time": "Thu May 26 11:24:25 2011 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu May 26 12:14:33 2011 +0100" }, "message": "ARM: 6944/1: mm: allow ASID 0 to be allocated to tasks\n\nNow that ASID 0 is no longer used as a reserved value, allow it to be\nallocated to tasks.\n\nAcked-by: Catalin Marinas \u003ccatalin.marinas@arm.com\u003e\nSigned-off-by: Will Deacon \u003cwill.deacon@arm.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "52af9c6cd863fe37d1103035ec7ee22ac1296458", "tree": "fd6b4e6d7b3bc2881422fb5e735c5b9eda62662a", "parents": [ "d427958a46af24f75d0017c45eadd172273bbf33" ], "author": { "name": "Will Deacon", "email": "will.deacon@arm.com", "time": "Thu May 26 11:23:43 2011 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu May 26 12:14:33 2011 +0100" }, "message": "ARM: 6943/1: mm: use TTBR1 instead of reserved context ID\n\nOn ARMv7 CPUs that cache first level page table entries (like the\nCortex-A15), using a reserved ASID while changing the TTBR or flushing\nthe TLB is unsafe.\n\nThis is because the CPU may cache the first level entry as the result of\na speculative memory access while the reserved ASID is assigned. After\nthe process owning the page tables dies, the memory will be reallocated\nand may be written with junk values which can be interpreted as global,\nvalid PTEs by the processor. This will result in the TLB being populated\nwith bogus global entries.\n\nThis patch avoids the use of a reserved context ID in the v7 switch_mm\nand ASID rollover code by temporarily using the swapper_pg_dir pointed\nat by TTBR1, which contains only global entries that are not tagged\nwith ASIDs.\n\nAcked-by: Catalin Marinas \u003ccatalin.marinas@arm.com\u003e\nSigned-off-by: Will Deacon \u003cwill.deacon@arm.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "d427958a46af24f75d0017c45eadd172273bbf33", "tree": "e4279d383e7eaccdfe22420abe0a68a35bcc4c85", "parents": [ "a248b13b21ae00b97638b4f435c8df3075808b5d" ], "author": { "name": "Catalin Marinas", "email": "catalin.marinas@arm.com", "time": "Thu May 26 11:22:44 2011 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu May 26 12:14:32 2011 +0100" }, "message": "ARM: 6942/1: mm: make TTBR1 always point to swapper_pg_dir on ARMv6/7\n\nThis patch makes TTBR1 point to swapper_pg_dir so that global, kernel\nmappings can be used exclusively on v6 and v7 cores where they are\nneeded.\n\nSigned-off-by: Catalin Marinas \u003ccatalin.marinas@arm.com\u003e\nSigned-off-by: Will Deacon \u003cwill.deacon@arm.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "a248b13b21ae00b97638b4f435c8df3075808b5d", "tree": "ccd6357563a720660abd4af559e8d8043c64290e", "parents": [ "a85fab1c795c88675ba3e23e68d821c57e9920fc" ], "author": { "name": "Will Deacon", "email": "will.deacon@arm.com", "time": "Thu May 26 11:20:19 2011 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu May 26 12:14:32 2011 +0100" }, "message": "ARM: 6941/1: cache: ensure MVA is cacheline aligned in flush_kern_dcache_area\n\nThe v6 and v7 implementations of flush_kern_dcache_area do not align\nthe passed MVA to the size of a cacheline in the data cache. If a\nmisaligned address is used, only a subset of the requested area will\nbe flushed. This has been observed to cause failures in SMP boot where\nthe secondary_data initialised by the primary CPU is not cacheline\naligned, causing the secondary CPUs to read incorrect values for their\npgd and stack pointers.\n\nThis patch ensures that the base address is cacheline aligned before\nflushing the d-cache.\n\nCc: \u003cstable@kernel.org\u003e\nAcked-by: Catalin Marinas \u003ccatalin.marinas@arm.com\u003e\nSigned-off-by: Will Deacon \u003cwill.deacon@arm.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "a85fab1c795c88675ba3e23e68d821c57e9920fc", "tree": "7263adfd02738c15c648fd013244f162107e377f", "parents": [ "fbb9e0b6e7d534b5d9e3c3eddb68b62d26ddb731" ], "author": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu May 26 12:12:13 2011 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu May 26 12:12:13 2011 +0100" }, "message": "ARM: add sendmmsg syscall\n\nCommit 228e548e (net: Add sendmmsg socket system call) added the new\nsendmmsg syscall. Add this to the syscall table for ARM.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "fbb9e0b6e7d534b5d9e3c3eddb68b62d26ddb731", "tree": "64c8d2a11523411ce7e63d6f53c49e72fb5b0ac5", "parents": [ "40f7bfe4f1c2761abeceb3b2b9dc1feec3c47ed9" ], "author": { "name": "Jeffrey Ohlstein", "email": "johlstei@codeaurora.org", "time": "Mon Apr 04 21:08:25 2011 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu May 26 10:37:40 2011 +0100" }, "message": "ARM: 6863/1: allow hotplug on msm\n\nHotplug support was added in 9f1890a (msm: hotplug: support cpu hotplug\non msm, 2010-12-02)\n\nSigned-off-by: Jeff Ohlstein \u003cjohlstei@codeaurora.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "729303191ef4bd5df4c5e9ffca62268758928b2c", "tree": "e2410d5b07b33efc5f03c3759d09f89660c4bb05", "parents": [ "97ceed1fc29b601e64af98fd785e25fec4383b12" ], "author": { "name": "Linus Walleij", "email": "linus.walleij@linaro.org", "time": "Thu Mar 24 16:13:13 2011 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu May 26 10:33:35 2011 +0100" }, "message": "ARM: 6830/1: mach-ux500: force PrimeCell revisions\n\nThe DB8500v2 and DB5500 has a fifth version of the \"PL023\" and\nPL180 blocks. However the ASIC engineers have forgot to bump the\nrevision in the PrimeCell peripheral ID registers. Since the\nplatform is aware of the actual silicon revision we need to\nhard-code the periphid from the platform, bumping the subrevision\nfield to 1.\n\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "e536fbe18f803b6bf9f2ea2d54d918e2b09724d8", "tree": "b5e361bd89142792ab58f98683e7e583ccdec021", "parents": [ "5de5a4dd872b2ca9fe8be380be5c1a78ce83b88c" ], "author": { "name": "Linus Walleij", "email": "linus.walleij@linaro.org", "time": "Thu Mar 24 16:12:07 2011 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu May 26 10:33:34 2011 +0100" }, "message": "ARM: 6828/1: mach-ux500: delete SSP PrimeCell ID\n\nThis is redundant. The correct ID number is right there in the\nhardware anyway. We will introduce a mechanism later to hard-code\nthis for deviant cells.\n\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "5de5a4dd872b2ca9fe8be380be5c1a78ce83b88c", "tree": "abdbecb751a6b0878bd993df72ceca077b143510", "parents": [ "2846d84ffa4408c9810fabad74cb7aec410352fc" ], "author": { "name": "Linus Walleij", "email": "linus.walleij@linaro.org", "time": "Thu Mar 24 16:11:35 2011 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu May 26 10:33:34 2011 +0100" }, "message": "ARM: 6827/1: mach-netx: delete hardcoded periphid\n\nThe periphid of the AMBA CLCD controller is hardcoded to a value\nthat the CLCD driver does not even support.\n\nCc: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "2846d84ffa4408c9810fabad74cb7aec410352fc", "tree": "25e0a37c87f283e24808ecceb84bb846f9e49e07", "parents": [ "dc2eb928a1bcf6a48f40c1f2ff21b66bdbf91a3c" ], "author": { "name": "Dave Martin", "email": "dave.martin@linaro.org", "time": "Tue May 24 12:11:48 2011 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu May 26 10:31:06 2011 +0100" }, "message": "ARM: 6940/1: fiq: Briefly document driver responsibilities for suspend/resume\n\nDrivers which make use of the FIQ interrupt may require the state\nof the FIQ mode registers to be preserved across suspend/resume.\n\nBecause the FIQ mode registers are not saved and restored\nautomatically by the kernel, driver authors will need to do the\nappropriate save/restore in their own driver suspend/resume\nhandlers.\n\nImplementing global automatic save/restore of the FIQ state does\nnot appear appropriate, since this by itself is not sufficient for\nFIQ-based drivers to function correctly across suspend/resume in\nany case.\n\nThis patch adds a brief explanatory note to fiq.h documenting the\nrequirement placed on driver authors.\n\nSigned-off-by: Dave Martin \u003cdave.martin@linaro.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "dc2eb928a1bcf6a48f40c1f2ff21b66bdbf91a3c", "tree": "3f877569ca481ad79378ed0e5932006434a1cc1e", "parents": [ "4db70f73e56961b9bcdfd0c36c62847a18b7dbb5" ], "author": { "name": "Dave Martin", "email": "dave.martin@linaro.org", "time": "Mon May 23 12:22:10 2011 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu May 26 10:31:06 2011 +0100" }, "message": "ARM: 6938/1: fiq: Refactor {get,set}_fiq_regs() for Thumb-2\n\n * To remove the risk of inconvenient register allocation decisions\n by the compiler, these functions are separated out as pure\n assembler.\n\n * The apcs frame manipulation code is not applicable for Thumb-2\n (and also not easily compatible). Since it\u0027s not essential to\n have a full frame on these leaf assembler functions, the frame\n manipulation is removed, in the interests of simplicity.\n\n * Split up ldm/stm instructions to be compatible with Thumb-2,\n as well as avoiding instruction forms deprecated on \u003e\u003d ARMv7.\n\nSigned-off-by: Dave Martin \u003cdave.martin@linaro.org\u003e\nReviewed-by: Nicolas Pitre \u003cnicolas.pitre@linaro.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "40f7bfe4f1c2761abeceb3b2b9dc1feec3c47ed9", "tree": "f7ed5abed753ec18fd5874d1088afc02dc23de0c", "parents": [ "7b7bf499f79de3f6c85a340c8453a78789523f85" ], "author": { "name": "Will Deacon", "email": "will.deacon@arm.com", "time": "Thu May 19 13:22:48 2011 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu May 26 10:23:25 2011 +0100" }, "message": "ARM: 6914/1: sparsemem: fix highmem detection when using SPARSEMEM\n\nsanity_check_meminfo walks over the registered memory banks and attempts\nto split banks across lowmem and highmem when they would otherwise\noverlap with the vmalloc space.\n\nWhen SPARSEMEM is used, there are two potential problems that occur\nwhen the virtual address of the start of a bank is equal to vmalloc_min.\n\n 1.) The end of lowmem is calculated as __pa(vmalloc_min - 1) + 1.\n In the above scenario, this will give the end address of the\n previous bank, rather than the actual bank we are interested in.\n This value is later used as the memblock limit and artificially\n restricts the total amount of available memory.\n\n 2.) The checks to determine whether or not a bank belongs to highmem\n or not only check if __va(bank-\u003estart) is greater or less than\n vmalloc_min. In the case that it is equal, the bank is incorrectly\n treated as lowmem, which hoses the vmalloc area.\n\nThis patch fixes these two problems by checking whether the virtual\nstart address of a bank is \u003e\u003d vmalloc_min and then calculating\nlowmem_end by finding the virtual end address of the highest lowmem\nbank.\n\nAcked-by: Catalin Marinas \u003ccatalin.marinas@arm.com\u003e\nReviewed-by: Nicolas Pitre \u003cnicolas.pitre@linaro.org\u003e\nSigned-off-by: Will Deacon \u003cwill.deacon@arm.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "7b7bf499f79de3f6c85a340c8453a78789523f85", "tree": "1d0bf7ae8d5befe135fb7e7cfc455656a0ec7b34", "parents": [ "4db70f73e56961b9bcdfd0c36c62847a18b7dbb5" ], "author": { "name": "Will Deacon", "email": "will.deacon@arm.com", "time": "Thu May 19 13:21:14 2011 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu May 26 10:23:24 2011 +0100" }, "message": "ARM: 6913/1: sparsemem: allow pfn_valid to be overridden when using SPARSEMEM\n\nIn commit eb33575c (\"[ARM] Double check memmap is actually valid with a\nmemmap has unexpected holes V2\"), a new function, memmap_valid_within,\nwas introduced to mmzone.h so that holes in the memmap which pass\npfn_valid in SPARSEMEM configurations can be detected and avoided.\n\nThe fix to this problem checks that the pfn \u003c-\u003e page linkages are\ncorrect by calculating the page for the pfn and then checking that\npage_to_pfn on that page returns the original pfn. Unfortunately, in\nSPARSEMEM configurations, this results in reading from the page flags to\ndetermine the correct section. Since the memmap here has been freed,\njunk is read from memory and the check is no longer robust.\n\nIn the best case, reading from /proc/pagetypeinfo will give you the\nwrong answer. In the worst case, you get SEGVs, Kernel OOPses and hung\nCPUs. Furthermore, ioremap implementations that use pfn_valid to\ndisallow the remapping of normal memory will break.\n\nThis patch allows architectures to provide their own pfn_valid function\ninstead of using the default implementation used by sparsemem. The\narchitecture-specific version is aware of the memmap state and will\nreturn false when passed a pfn for a freed page within a valid section.\n\nAcked-by: Mel Gorman \u003cmgorman@suse.de\u003e\nAcked-by: Catalin Marinas \u003ccatalin.marinas@arm.com\u003e\nTested-by: H Hartley Sweeten \u003chsweeten@visionengravers.com\u003e\nSigned-off-by: Will Deacon \u003cwill.deacon@arm.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "8c1c77ff9be27137fa7cbbf51efedef1a2ae915b", "tree": "cdbd09cac5f5d1c6eb5ec4257dc478c6acca70c5", "parents": [ "f3ae1c75203535f65448517e46c8dd70a56b6c71", "08ee80cc397ac1a306ca689a22ede954d92d0db1" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 25 16:55:55 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 25 16:55:55 2011 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (75 commits)\n mmc: core: eMMC bus width may not work on all platforms\n mmc: sdhci: Auto-CMD23 fixes.\n mmc: sdhci: Auto-CMD23 support.\n mmc: core: Block CMD23 support for UHS104/SDXC cards.\n mmc: sdhci: Implement MMC_CAP_CMD23 for SDHCI.\n mmc: core: Use CMD23 for multiblock transfers when we can.\n mmc: quirks: Add/remove quirks conditional support.\n mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver\n mmc: sdhci-pxa: Add quirks for DMA/ADMA to match h/w\n mmc: core: duplicated trial with same freq in mmc_rescan_try_freq()\n mmc: core: add support for eMMC Dual Data Rate\n mmc: core: eMMC signal voltage does not use CMD11\n mmc: sdhci-pxa: add platform code for UHS signaling\n mmc: sdhci: add hooks for setting UHS in platform specific code\n mmc: core: clear MMC_PM_KEEP_POWER flag on resume\n mmc: dw_mmc: fixed wrong regulator_enable in suspend/resume\n mmc: sdhi: allow powering down controller with no card inserted\n mmc: tmio: runtime suspend the controller, where possible\n mmc: sdhi: support up to 3 interrupt sources\n mmc: sdhi: print physical base address and clock rate\n ...\n" }, { "commit": "ae1d3b974e091b5fc9008bd41bcbdaac68110b62", "tree": "82e50a66925ced79f59ed4504f6e073ef55edee3", "parents": [ "586893ebc42943008010b4c210cfc9167df615e5", "7a2207a0e1142a9b214b323e43ab2ecc592e5b0e" ], "author": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu May 26 00:41:21 2011 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu May 26 00:41:21 2011 +0100" }, "message": "Merge branch \u0027for-rmk\u0027 of git://github.com/at91linux/linux-2.6-at91 into devel-stable\n" }, { "commit": "ad363e0916423b2e6cdfcdc30ae707ec709f0a65", "tree": "c47cc9062f7adc0ceb27f634b63b8548b733f01c", "parents": [ "ed0795aa12129df9f3d2cc81ee579a9e54e12885", "1032fbfd792f2b384ac16a63993b8fae5eea9083" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 25 15:35:03 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 25 15:35:03 2011 -0700" }, "message": "Merge branch \u0027for-torvalds\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson\n\n* \u0027for-torvalds\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:\n mach-ux500: voltage domain regulators for DB8500\n cpufreq: make DB8500 cpufreq driver compile\n cpufreq: update DB8500 cpufreq driver\n mach-ux500: move CPUfreq driver to cpufreq subsystem\n mfd: add DB5500 PRCMU driver\n mfd: update DB8500 PRCMU driver\n mach-ux500: move the DB8500 PRCMU driver to MFD\n mach-ux500: make PRCMU base address dynamic\n mach-ux500: rename PRCMU driver per SoC\n mach-ux500: update ASIC version detection\n mach-ux500: update SoC and board IRQ handling\n mach-ux500: update the DB5500 register file\n mach-ux500: update the DB8500 register file\n" }, { "commit": "4e8a780ed6e1fdb8af203f61718212d5739bc4a0", "tree": "2f3b28f400932d72c3940ff360a1be1fed8b0f87", "parents": [ "90ff1f30c0f401e325d6b2747618b7e3a0addaf8", "66ee3bef3ce0bab155de082805388bd6ec2785f8" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 25 15:33:25 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 25 15:33:25 2011 -0700" }, "message": "Merge branch \u0027rmobile-latest\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6\n\n* \u0027rmobile-latest\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (34 commits)\n ARM: mach-shmobile: mackerel: add renesas_usbhs support for USB1\n ARM: mach-shmobile: Correct the G4EVM SDHI0 I/O range.\n ARM: arch-shmobile: sh7372: add renesas_usbhs irq support\n ARM: mach-shmobile: sh73a0: mark DMA slave ID 0 as invalid\n ARM: mach-shmobile: mark DMA slave ID 0 as invalid\n ARM: mach-shmobile: Enable DMAEngine for SDHI on AG5EVM\n ARM: mach-shmobile: Enable DMAEngine for MMCIF on AG5EVM\n ARM: mach-shmobile: sh73a0 DMA Engine support for SY-DMAC\n dmaengine: shdma: Update SH_DMAC_MAX_CHANNELS to 20\n dmaengine: shdma: Fix SH_DMAC_MAX_CHANNELS handling\n dmaengine: shdma: Make second memory window optional\n ARM: mach-shmobile: Tidy up after SH7372 pm changes.\n ARM: mach-shmobile: sh7372 Core Standby CPUIdle\n ARM: mach-shmobile: CPUIdle support\n ARM: mach-shmobile: sh7372 Core Standby Suspend-to-RAM\n ARM: mach-shmobile: Suspend-to-RAM support\n mailmap: Add entry for Damian Hobson-Garcia.\n ARM: switch mackerel to dynamically manage the platform camera\n ARM: mach-shmobile: Add SDHI support for AG5EVM and sh73a0\n ARM: arch-shmobile: Use multiple irq vectors for SDHI\n ...\n" }, { "commit": "586893ebc42943008010b4c210cfc9167df615e5", "tree": "eec3179235978fba9ca6bfae0799d97c8532ee15", "parents": [ "014322dac6ae0048c928c6ca2faf0d53194f9d15", "bd6356bdafc853201168f718f0059fbe11191461" ], "author": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Wed May 25 21:47:48 2011 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Wed May 25 21:47:48 2011 +0100" }, "message": "Merge branch \u0027for-rmk\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable\n\nConflicts:\n\tarch/arm/Kconfig\n\tarch/arm/mach-exynos4/mach-nuri.c\n" }, { "commit": "22e12bbc9bc38c6d0bd541d061a0f547596fc19d", "tree": "39b93f43b482c5b4cb9d99933384a8a7fcb85d71", "parents": [ "19426a8f810752b4218e59b1e2187f33e255f7bc", "86ff9baadf16c8a1b452d72f5585be63457d9b15" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 25 08:59:42 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 25 08:59:42 2011 -0700" }, "message": "Merge branch \u0027timers-ptp-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027timers-ptp-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n ptp: Fix dp83640 build warning when building statically\n ptp: Added a clock driver for the National Semiconductor PHYTER.\n ptp: Added a clock driver for the IXP46x.\n ptp: Added a clock that uses the eTSEC found on the MPC85xx.\n ptp: Added a brand new class driver for ptp clocks.\n" }, { "commit": "0f1493a60167cf6333626456d3fc8aff4e6fa237", "tree": "3b46a263bbab4fd396f01f35f0ceca7f3b063163", "parents": [ "023bc8e75f8cf9e4da8411154be22a4f809d3314", "087faf77a57b06f9a8ce37781c68e3f02468322b" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 25 08:42:37 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 25 08:42:37 2011 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: (126 commits)\n sh_mobile_meram: Safely disable MERAM operation when not initialized\n video: mb862xxfb: add support for L1 displaying\n video: mb862xx: add support for controller\u0027s I2C bus adapter\n video: mb862xxfb: relocate register space to get contiguous vram\n video: mb862xxfb: use pre-initialized configuration for PCI GDCs\n video: mb862xxfb: correct fix.smem_len field initialization\n video: s3c-fb: correct transparency checking in 32bpp\n video: s3c-fb: add gpio setup function to resume function\n fbdev/amifb: Remove superfluous alignment of frame buffer memory\n fbdev/amifb: Do not call panic() if there\u0027s not enough Chip RAM\n fbdev/amifb: Correct check for video memory size\n video: mb862xxfb: Require either FB_MB862XX_PCI_GDC or FB_MB862XX_LIME\n video: s3c-fb: add window variant information for S5P\n video: s3c-fb: add additional validate bpps\n video: s3c-fb: correct window osd size offset values\n udlfb: include prefetch.h explicitly\n drivers/video/s3c2410fb.c: Convert release_resource to release_mem_region\n drivers/video/sm501fb.c: Convert release_resource to release_mem_region\n drivers/video: Convert release_resource to release_mem_region\n video, udlfb: Fix two build warnings about \u0027ignoring return value\u0027\n ...\n" }, { "commit": "5ca43f6c3b365024d889bc77064bb331f5a72a45", "tree": "c22cf20dc33d85770b88c117fd67b33c7bd7099d", "parents": [ "c84598bbfa756b7d042da31aa4e198ae866a6c7d" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Tue May 24 17:13:36 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 25 08:39:54 2011 -0700" }, "message": "lib: consolidate DEBUG_STACK_USAGE option\n\nMost arches define CONFIG_DEBUG_STACK_USAGE exactly the same way. Move it\nto lib/Kconfig.debug so each arch doesn\u0027t have to define it. This\nobviously makes the option generic, but that\u0027s fine because the config is\nalready used in generic code.\n\nIt\u0027s not obvious to me that sysrq-P actually does anything caution by\nkeeping the most inclusive wording.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\nCc: Chris Metcalf \u003ccmetcalf@tilera.com\u003e\nAcked-by: David S. Miller \u003cdavem@davemloft.net\u003e\nAcked-by: Richard Weinberger \u003crichard@nod.at\u003e\nAcked-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nCc: Hirokazu Takata \u003ctakata@linux-m32r.org\u003e\nAcked-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nCc: Paul Mackerras \u003cpaulus@samba.org\u003e\nAcked-by: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nCc: Chen Liqin \u003cliqin.chen@sunplusct.com\u003e\nCc: Lennox Wu \u003clennox.wu@gmail.com\u003e\nCc: Ingo Molnar \u003cmingo@elte.hu\u003e\nCc: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nCc: \"H. Peter Anvin\" \u003chpa@zytor.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "818b667ba57f68bf1e7240fa441dda0b11e6b944", "tree": "da37013a41f5b8f773a0c8b75b448910a51a7495", "parents": [ "21b7d815b2cc380929181e1a4a7129e8b569e574" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Tue May 24 17:13:08 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 25 08:39:43 2011 -0700" }, "message": "Remove unused PROC_CHANGE_PENALTY constant\n\nThis constant hasn\u0027t been used since before the git era (2.6.12) and thus\ncan be dropped.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nCc: Richard Weinberger \u003crichard@nod.at\u003e\nCc: Hirokazu Takata \u003ctakata@linux-m32r.org\u003e\nCc: Kyle McMartin \u003ckyle@mcmartin.ca\u003e\nCc: Richard Henderson \u003crth@twiddle.net\u003e\nCc: Ivan Kokshaysky \u003cink@jurassic.park.msu.ru\u003e\nCc: Matt Turner \u003cmattst88@gmail.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "1c395176962176660bb108f90e97e1686cfe0d85", "tree": "dc3b91d8d0d9b00a59f26677cce0f9eb90b1772f", "parents": [ "ff075d605511784c79cbf0ae73d90e07238267b3" ], "author": { "name": "Peter Zijlstra", "email": "a.p.zijlstra@chello.nl", "time": "Tue May 24 17:11:58 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 25 08:39:16 2011 -0700" }, "message": "mm: now that all old mmu_gather code is gone, remove the storage\n\nFold all the mmu_gather rework patches into one for submission\n\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nReported-by: Hugh Dickins \u003chughd@google.com\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nCc: David Miller \u003cdavem@davemloft.net\u003e\nCc: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nCc: Paul Mundt \u003clethal@linux-sh.org\u003e\nCc: Jeff Dike \u003cjdike@addtoit.com\u003e\nCc: Richard Weinberger \u003crichard@nod.at\u003e\nCc: Tony Luck \u003ctony.luck@intel.com\u003e\nCc: KAMEZAWA Hiroyuki \u003ckamezawa.hiroyu@jp.fujitsu.com\u003e\nCc: Mel Gorman \u003cmel@csn.ul.ie\u003e\nCc: KOSAKI Motohiro \u003ckosaki.motohiro@jp.fujitsu.com\u003e\nCc: Nick Piggin \u003cnpiggin@kernel.dk\u003e\nCc: Namhyung Kim \u003cnamhyung@gmail.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "9e14f6741062b6e6a71de75b4375e14c3e92c213", "tree": "fd4eced90101a1cda6e501bd022a35c384851590", "parents": [ "68f03921235c59507578a0165f87100d1120ec62" ], "author": { "name": "Peter Zijlstra", "email": "a.p.zijlstra@chello.nl", "time": "Tue May 24 17:11:53 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 25 08:39:14 2011 -0700" }, "message": "arm: mmu_gather rework\n\nFix up the arm mmu_gather code to conform to the new API.\n\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nCc: David Miller \u003cdavem@davemloft.net\u003e\nCc: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nCc: Paul Mundt \u003clethal@linux-sh.org\u003e\nCc: Jeff Dike \u003cjdike@addtoit.com\u003e\nCc: Richard Weinberger \u003crichard@nod.at\u003e\nCc: Tony Luck \u003ctony.luck@intel.com\u003e\nCc: KAMEZAWA Hiroyuki \u003ckamezawa.hiroyu@jp.fujitsu.com\u003e\nCc: Hugh Dickins \u003chughd@google.com\u003e\nCc: Mel Gorman \u003cmel@csn.ul.ie\u003e\nCc: KOSAKI Motohiro \u003ckosaki.motohiro@jp.fujitsu.com\u003e\nCc: Nick Piggin \u003cnpiggin@kernel.dk\u003e\nCc: Namhyung Kim \u003cnamhyung@gmail.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "7bf02ea22c6cdd09e2d3f1d3c3fe366b834ae9af", "tree": "c1c8aa415910e0f0deea1181759ddd2b5d6067fb", "parents": [ "851cc856d73d1185243c149ed0c0839df8a1b2fe" ], "author": { "name": "David Rientjes", "email": "rientjes@google.com", "time": "Tue May 24 17:11:16 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed May 25 08:39:03 2011 -0700" }, "message": "arch, mm: filter disallowed nodes from arch specific show_mem functions\n\nArchitectures that implement their own show_mem() function did not pass\nthe filter argument to show_free_areas() to appropriately avoid emitting\nthe state of nodes that are disallowed in the current context. This patch\nnow passes the filter argument to show_free_areas() so those nodes are now\navoided.\n\nThis patch also removes the show_free_areas() wrapper around\n__show_free_areas() and converts existing callers to pass an empty filter.\n\nia64 emits additional information for each node, so skip_free_areas_zone()\nmust be made global to filter disallowed nodes and it is converted to use\na nid argument rather than a zone for this use case.\n\nSigned-off-by: David Rientjes \u003crientjes@google.com\u003e\nCc: Russell King \u003clinux@arm.linux.org.uk\u003e\nCc: Tony Luck \u003ctony.luck@intel.com\u003e\nCc: Fenghua Yu \u003cfenghua.yu@intel.com\u003e\nCc: Kyle McMartin \u003ckyle@mcmartin.ca\u003e\nCc: Helge Deller \u003cdeller@gmx.de\u003e\nCc: James Bottomley \u003cjejb@parisc-linux.org\u003e\nCc: \"David S. Miller\" \u003cdavem@davemloft.net\u003e\nCc: Guan Xuetao \u003cgxt@mprc.pku.edu.cn\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "7a2207a0e1142a9b214b323e43ab2ecc592e5b0e", "tree": "5e47b1916739c2148ec8cdb9b2d9dc256fcc0a0a", "parents": [ "e57556e3b6dcbf9b459cd503b061457b6ed1758f" ], "author": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Tue May 17 20:51:14 2011 +0800" }, "committer": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Wed May 25 23:04:35 2011 +0800" }, "message": "at91: drop at572d940hf support\n\nno-one use it and it\u0027s nearly impossible get a board to work on it\nand the Mainline implementation was never finished\n\nSigned-off-by: Jean-Christophe PLAGNIOL-VILLARD \u003cplagnioj@jcrosoft.com\u003e\nCc: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\nCc: Patrice Vilchez \u003cpatrice.vilchez@atmel.com\u003e\nCc: Andrew Victor \u003clinux@maxim.org.za\u003e\n" }, { "commit": "e57556e3b6dcbf9b459cd503b061457b6ed1758f", "tree": "460d002f98a81a3c53983c3129f7455d011afdc8", "parents": [ "3d51f259e819b49b3f88b594afcb044d1ffcda8a" ], "author": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Sun Apr 24 11:40:22 2011 +0800" }, "committer": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Wed May 25 23:04:35 2011 +0800" }, "message": "at91rm9200: introduce at91rm9200_set_type to specficy cpu package\n\nas we can not detect it\nby defaut the type will be bga\nintroduce cpu_is_at91rm9200_bga and cpu_is_at91rm9200_pqfp\n\nSigned-off-by: Jean-Christophe PLAGNIOL-VILLARD \u003cplagnioj@jcrosoft.com\u003e\nCc: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\nCc: Patrice Vilchez \u003cpatrice.vilchez@atmel.com\u003e\n" }, { "commit": "3d51f259e819b49b3f88b594afcb044d1ffcda8a", "tree": "587d282cd4b550df904642fd1ea71488b30530a4", "parents": [ "ee2e35015d4f09ce748a96a79582e959e6053f1a" ], "author": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Tue May 03 00:44:58 2011 +0800" }, "committer": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Wed May 25 23:04:35 2011 +0800" }, "message": "at91: drop boot_params and PLAT_PHYS_OFFSET\n\nselect ARM_PATCH_PHYS_VIRT\nas with ARM_PATCH_PHYS_VIRT you can patch boot_params at runtime or any recent\nbootloader will provide a valid atags pointer in r2\n\nas point out by Russell on AT91 we never use XIP\nso se do not need PLAT_PHYS_OFFSET\n\nSigned-off-by: Jean-Christophe PLAGNIOL-VILLARD \u003cplagnioj@jcrosoft.com\u003e\nCc: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\nCc: Patrice Vilchez \u003cpatrice.vilchez@atmel.com\u003e\nCc: Andrew Victor \u003clinux@maxim.org.za\u003e\nCc: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "ee2e35015d4f09ce748a96a79582e959e6053f1a", "tree": "81dab7538169321fd6481c7777f51c473d5b7434", "parents": [ "bd60299594fb1d28ae66563c9e76a0b89b0412cf" ], "author": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Mon May 02 01:05:54 2011 +0800" }, "committer": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Wed May 25 23:04:34 2011 +0800" }, "message": "at91: factorize common irq ID\n\nSigned-off-by: Jean-Christophe PLAGNIOL-VILLARD \u003cplagnioj@jcrosoft.com\u003e\nCc: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\nCc: Patrice Vilchez \u003cpatrice.vilchez@atmel.com\u003e\nCc: Andrew Victor \u003clinux@maxim.org.za\u003e\n" }, { "commit": "bd60299594fb1d28ae66563c9e76a0b89b0412cf", "tree": "be57b42058328220a29a03ab68970a3b2a12949d", "parents": [ "1b021a3b23a40be89c4f3fbe6f4696aa15141f26" ], "author": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Wed Feb 02 07:27:07 2011 +0100" }, "committer": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Wed May 25 23:04:34 2011 +0800" }, "message": "at91: switch to CLKDEV_LOOKUP\n\nwe do not change the clock naming convention so does not need to switch\nthe AVR32 yet\n\nSigned-off-by: Jean-Christophe PLAGNIOL-VILLARD \u003cplagnioj@jcrosoft.com\u003e\nAcked-by: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\nCc: Patrice Vilchez \u003cpatrice.vilchez@atmel.com\u003e\n" }, { "commit": "1b021a3b23a40be89c4f3fbe6f4696aa15141f26", "tree": "09267f2ba276d7e648fd802f10af6b67ea57dc8a", "parents": [ "1cef3e15721dc9e75f9b661270153e1d6f5e0993" ], "author": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Thu Apr 28 20:19:32 2011 +0800" }, "committer": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Wed May 25 23:04:34 2011 +0800" }, "message": "at91: fix map_io init usage\n\nswitch early init to init_early and introduce soc map_io\n\nwith this Patch we will not do any more early device setup during the map io\n\ntks to Russell to point the new call back\n\nSigned-off-by: Jean-Christophe PLAGNIOL-VILLARD \u003cplagnioj@jcrosoft.com\u003e\nCc: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\nCc: Patrice Vilchez \u003cpatrice.vilchez@atmel.com\u003e\nAcked-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\nAcked-by: Andrew Victor \u003clinux@maxim.org.za\u003e\n" }, { "commit": "1cef3e15721dc9e75f9b661270153e1d6f5e0993", "tree": "6c77b7e3bbf50478b5b5731f5031b7cfafc2c35d", "parents": [ "2b348e2f82f532e3aff8e0ce9293033b3294c1e0" ], "author": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Mon Apr 11 23:31:28 2011 +0800" }, "committer": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Wed May 25 23:04:33 2011 +0800" }, "message": "at91/board-eco920: remove at91_beeper ressource as no driver at91_beeper exist\n\nSigned-off-by: Jean-Christophe PLAGNIOL-VILLARD \u003cplagnioj@jcrosoft.com\u003e\nCc: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\n" }, { "commit": "2b348e2f82f532e3aff8e0ce9293033b3294c1e0", "tree": "771e08a36011c6010962de74bc54b7299466a588", "parents": [ "dd41d3216b05200cf01381927804a35315352a35" ], "author": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Sun Apr 10 14:10:05 2011 +0800" }, "committer": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Wed May 25 23:04:33 2011 +0800" }, "message": "atmel_serial: keep the platform_device unchanged\n\nspecify the port num via platform_data this will allow to match the clock\nwith the plaform_dev staticaly\n\nSigned-off-by: Jean-Christophe PLAGNIOL-VILLARD \u003cplagnioj@jcrosoft.com\u003e\nAcked-by: Alan Cox \u003calan@linux.intel.com\u003e\nCc: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\nCc: Patrice Vilchez \u003cpatrice.vilchez@atmel.com\u003e\nCc: Hans-Christian Egtvedt \u003chans-christian.egtvedt@atmel.com\u003e\nCc: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "dd41d3216b05200cf01381927804a35315352a35", "tree": "8f8d337dd7723e1ee3a37bc722c7267638f8e398", "parents": [ "dbadf0f29e2f3719ab950fb3a59e132bbe4bf63e" ], "author": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Tue Apr 05 17:52:10 2011 +0800" }, "committer": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Wed May 25 23:04:33 2011 +0800" }, "message": "at91sam9261: rename at91sam9261ek to at91sam9261 defconfig\n\nand update it with ubi, sound, nfs support etc...\n\nSigned-off-by: Jean-Christophe PLAGNIOL-VILLARD \u003cplagnioj@jcrosoft.com\u003e\nCc: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\n" }, { "commit": "dbadf0f29e2f3719ab950fb3a59e132bbe4bf63e", "tree": "e7cac73fbfaf1b3d100857eaf2d10f8bf7ba780d", "parents": [ "76b2ab76a4492f8f43c511857181f8421901ce3f" ], "author": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Tue Apr 05 01:48:14 2011 +0800" }, "committer": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Wed May 25 23:04:32 2011 +0800" }, "message": "at91sam9263: merge all boards defconfig into only one\n\nTested on at91sam9263ek\n\nSigned-off-by: Jean-Christophe PLAGNIOL-VILLARD \u003cplagnioj@jcrosoft.com\u003e\nCc: Guillaume GARDET \u003cguillaume.gardet@free.fr\u003e\nCc: Grégory Hermant \u003cgregory.hermant@calao-systems.com\u003e\nCc: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\n" }, { "commit": "76b2ab76a4492f8f43c511857181f8421901ce3f", "tree": "3594dadd853458ae4651a93db4d78248232b5518", "parents": [ "4a7df24ddc7097cd789a7527187826552ea0765e" ], "author": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Thu Apr 14 00:34:03 2011 +0800" }, "committer": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Wed May 25 23:04:32 2011 +0800" }, "message": "at91: remove MTD_NAND_ATMEL_BUSWIDTH_16 option\n\nno board configure it as \u0027n\u0027 and it\u0027s an issue to merge all defconfigs\nin one\n\nOn AT91SAM926x boards both types of NAND flash can be present\n(8 and 16 bit data bus width).\n\nso will pass it via system_rev\n\nSigned-off-by: Jean-Christophe PLAGNIOL-VILLARD \u003cplagnioj@jcrosoft.com\u003e\nAcked-by: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\nCc: Patrice Vilchez \u003cpatrice.vilchez@atmel.com\u003e\n" }, { "commit": "66ee3bef3ce0bab155de082805388bd6ec2785f8", "tree": "6ab6da16cf6f0153b6aaf3c34e2f120fb1a8d591", "parents": [ "1acd3de54e242834a385810bc3f0fd44211e494e" ], "author": { "name": "Kuninori Morimoto", "email": "kuninori.morimoto.gx@renesas.com", "time": "Wed May 25 07:56:25 2011 +0000" }, "committer": { "name": "Paul Mundt", "email": "lethal@linux-sh.org", "time": "Wed May 25 17:07:36 2011 +0900" }, "message": "ARM: mach-shmobile: mackerel: add renesas_usbhs support for USB1\n\nrenesas_usbhs driver can use external interrupt mode\n(which come from USB-PHY) or autonomy mode (it use own interrupt)\nfor detecting connection/disconnection when Function.\nAnd it will be power OFF while it has been disconnecting\nif external interrupt mode is selected.\n\nmackerel board has 2 USB ports.\n\nBut we can not use external interrupt mode\non CN22 USB0 port which is only for USB Function.\nIRQ7-PORT40 is already used by Touchscreen,\nand USB-PHY needs IRQ7-PORT167.\nIt is impossible to use IRQ7 demux on mackerel.\n\nWe can use external interrupt mode USB-Function on \"USB1\".\nUSB1 can become Host by r8a66597, and become Function by renesas_usbhs.\nBut don\u0027t select both drivers in same time.\nThese 2 drivers are not supporting IRQ SHARD.\n\nSigned-off-by: Kuninori Morimoto \u003ckuninori.morimoto.gx@renesas.com\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n" }, { "commit": "1acd3de54e242834a385810bc3f0fd44211e494e", "tree": "fd6344bce85cecebac7cf4499daa9b9de30c70a3", "parents": [ "cc0a5a587dece540b84f3a862f58118dedc847ab" ], "author": { "name": "Paul Mundt", "email": "lethal@linux-sh.org", "time": "Wed May 25 14:54:30 2011 +0900" }, "committer": { "name": "Paul Mundt", "email": "lethal@linux-sh.org", "time": "Wed May 25 14:54:30 2011 +0900" }, "message": "ARM: mach-shmobile: Correct the G4EVM SDHI0 I/O range.\n\nThis obviously should have been 0xe6d500ff, fix it up accordingly.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n" }, { "commit": "cc0a5a587dece540b84f3a862f58118dedc847ab", "tree": "a275b1d7f629cc97c4c985bb7f1f040a95903855", "parents": [ "416656ca427296c646c4a75d9a58769d582ca90c" ], "author": { "name": "Kuninori Morimoto", "email": "kuninori.morimoto.gx@renesas.com", "time": "Wed May 25 02:49:18 2011 +0000" }, "committer": { "name": "Paul Mundt", "email": "lethal@linux-sh.org", "time": "Wed May 25 11:58:25 2011 +0900" }, "message": "ARM: arch-shmobile: sh7372: add renesas_usbhs irq support\n\nrenesas_usbhs is remake version of r8a66597\n\nSigned-off-by: Kuninori Morimoto \u003ckuninori.morimoto.gx@renesas.com\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n" }, { "commit": "416656ca427296c646c4a75d9a58769d582ca90c", "tree": "35803cf5428fe2dae4218d12e5ab5e11ff9139ec", "parents": [ "f7481d012060d057b2727851373ca957958d41f1" ], "author": { "name": "Magnus Damm", "email": "damm@opensource.se", "time": "Tue May 24 11:19:35 2011 +0000" }, "committer": { "name": "Paul Mundt", "email": "lethal@linux-sh.org", "time": "Wed May 25 11:37:24 2011 +0900" }, "message": "ARM: mach-shmobile: sh73a0: mark DMA slave ID 0 as invalid\n\nThis makes it possible to leave DMA slave IDs in the platform data\nat default 0 value without hitting DMA channel allocation error paths.\n\nSigned-off-by: Magnus Damm \u003cdamm@opensource.se\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n" }, { "commit": "f7481d012060d057b2727851373ca957958d41f1", "tree": "04e09030b889883518aeea002368d4e7271b6f38", "parents": [ "6820e69c5e52cd127ab99e2f52664ed1e59e902f" ], "author": { "name": "Guennadi Liakhovetski", "email": "g.liakhovetski@gmx.de", "time": "Tue May 24 10:24:03 2011 +0000" }, "committer": { "name": "Paul Mundt", "email": "lethal@linux-sh.org", "time": "Wed May 25 11:37:19 2011 +0900" }, "message": "ARM: mach-shmobile: mark DMA slave ID 0 as invalid\n\nThis makes it possible to leave DMA slave IDs in the platform data\nat default 0 value without hitting DMA channel allocation error paths.\n\nSigned-off-by: Guennadi Liakhovetski \u003cg.liakhovetski@gmx.de\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n" }, { "commit": "6820e69c5e52cd127ab99e2f52664ed1e59e902f", "tree": "041aa0ecceac25bd40b71d14c1ef787bb9606939", "parents": [ "19aec34bd8c7309e39b19ed3bc9b7989d138b043" ], "author": { "name": "Magnus Damm", "email": "damm@opensource.se", "time": "Tue May 24 10:42:15 2011 +0000" }, "committer": { "name": "Paul Mundt", "email": "lethal@linux-sh.org", "time": "Wed May 25 11:37:00 2011 +0900" }, "message": "ARM: mach-shmobile: Enable DMAEngine for SDHI on AG5EVM\n\nAdd SDHI0 and SDHI1 slave ids for RX and TX to enable\nDMA Engine support for SDHI on the AG5EVM board.\n\nSigned-off-by: Magnus Damm \u003cdamm@opensource.se\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n" }, { "commit": "19aec34bd8c7309e39b19ed3bc9b7989d138b043", "tree": "ec3ed980a3313fe78c3f269665bb235b720b28f0", "parents": [ "681e1b3eeb3606e06a7c4984e8058df84296f8bb" ], "author": { "name": "Magnus Damm", "email": "damm@opensource.se", "time": "Tue May 24 10:40:33 2011 +0000" }, "committer": { "name": "Paul Mundt", "email": "lethal@linux-sh.org", "time": "Wed May 25 11:36:55 2011 +0900" }, "message": "ARM: mach-shmobile: Enable DMAEngine for MMCIF on AG5EVM\n\nSimply add MMCIF slave ids for RX and TX to enable\nDMA Engine support for the AG5EVM board.\n\nSigned-off-by: Magnus Damm \u003cdamm@opensource.se\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n" }, { "commit": "681e1b3eeb3606e06a7c4984e8058df84296f8bb", "tree": "29963ffcf43d6f4e6193fee5f8a1c38921afcf99", "parents": [ "d026e00e5841aa5612c2a877b688ffb7d99dd60a" ], "author": { "name": "Magnus Damm", "email": "damm@opensource.se", "time": "Tue May 24 10:37:16 2011 +0000" }, "committer": { "name": "Paul Mundt", "email": "lethal@linux-sh.org", "time": "Wed May 25 11:36:51 2011 +0900" }, "message": "ARM: mach-shmobile: sh73a0 DMA Engine support for SY-DMAC\n\nAdd SY-DMAC support via shdma.c to the sh73a0 SoC\nincluding slave ids, platform data and clock bindings.\n\nSigned-off-by: Magnus Damm \u003cdamm@opensource.se\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n" }, { "commit": "66ad12931d523e833516659eafcc29af9a08fff3", "tree": "938de8cf4f28b4ee0aeb7e7e4da329279b8274d4", "parents": [ "082a8ca1d3a2fbab76dba8ff66bc25c46677361d" ], "author": { "name": "Paul Mundt", "email": "lethal@linux-sh.org", "time": "Wed May 25 11:22:58 2011 +0900" }, "committer": { "name": "Paul Mundt", "email": "lethal@linux-sh.org", "time": "Wed May 25 11:22:58 2011 +0900" }, "message": "ARM: mach-shmobile: Tidy up after SH7372 pm changes.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n" }, { "commit": "082a8ca1d3a2fbab76dba8ff66bc25c46677361d", "tree": "93058d37fb5cba6573bd99684e1dabb6c8ca6b37", "parents": [ "0af4817b80870cc12f4b6f38d89f3c012a7a6b28" ], "author": { "name": "Magnus Damm", "email": "damm@opensource.se", "time": "Fri Apr 29 02:39:32 2011 +0900" }, "committer": { "name": "Paul Mundt", "email": "lethal@linux-sh.org", "time": "Wed May 25 11:19:24 2011 +0900" }, "message": "ARM: mach-shmobile: sh7372 Core Standby CPUIdle\n\nThis patch ties in the previously added sh7372 sleep\nmode known as Core Standby together with the shared\nSH-Mobile ARM CPUIdle implementation.\n\nSigned-off-by: Magnus Damm \u003cdamm@opensource.se\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n" }, { "commit": "0af4817b80870cc12f4b6f38d89f3c012a7a6b28", "tree": "71898dbecacbd02273eb47859e9e235293217b96", "parents": [ "97991657be8d85c2883ca477964f271d8c1bb96d" ], "author": { "name": "Magnus Damm", "email": "damm@opensource.se", "time": "Fri Apr 29 02:36:07 2011 +0900" }, "committer": { "name": "Paul Mundt", "email": "lethal@linux-sh.org", "time": "Wed May 25 11:19:23 2011 +0900" }, "message": "ARM: mach-shmobile: CPUIdle support\n\nThis patch adds a shared SH-Mobile ARM specific CPUIdle\nimplementation supporting WFI only at this point. It\nserves as a common point for late registration of the\narch-specific CPUIdle code, and supports adding extra\nsleep modes using the callback shmobile_cpuidle_setup()\ntogether with shmobile_cpuidle_modes[].\n\nSigned-off-by: Magnus Damm \u003cdamm@opensource.se\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n" }, { "commit": "97991657be8d85c2883ca477964f271d8c1bb96d", "tree": "9e0179407f1ca085027dc09d8c11aa99eb0594a2", "parents": [ "c3dada1894de46139c21352a1000c0fd02d308d5" ], "author": { "name": "Magnus Damm", "email": "damm@opensource.se", "time": "Fri Apr 29 02:28:08 2011 +0900" }, "committer": { "name": "Paul Mundt", "email": "lethal@linux-sh.org", "time": "Wed May 25 11:19:20 2011 +0900" }, "message": "ARM: mach-shmobile: sh7372 Core Standby Suspend-to-RAM\n\nAdd sh7372 Core Standby sleep mode support and tie it\nin with the shared SH-Mobile ARM suspend code.\n\nThe Core Standby mode is the lightest sh7372-specific\nsleep mode, cutting power to the ARM core excluding the\nL2 cache. Any interrupt source can be used for wakeups.\n\nThe low level portion of this code is based on the\nTI OMAP sleep code in sleep34xx.S, thanks to them.\n\nSigned-off-by: Magnus Damm \u003cdamm@opensource.se\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n" }, { "commit": "c3dada1894de46139c21352a1000c0fd02d308d5", "tree": "5486666006f9e377ad0585a4b4b2a0bf656646be", "parents": [ "cac6f98dfca51ec2dc906064ba0bf8be4f820ba0" ], "author": { "name": "Magnus Damm", "email": "damm@opensource.se", "time": "Fri Apr 29 02:23:28 2011 +0900" }, "committer": { "name": "Paul Mundt", "email": "lethal@linux-sh.org", "time": "Wed May 25 11:19:17 2011 +0900" }, "message": "ARM: mach-shmobile: Suspend-to-RAM support\n\nThis patch adds a simple Suspend-to-RAM implementation\nfor SH-Mobile ARM. The struct shmobile_suspend_ops are\nkept global to allow cpu-specific code to override\nthe callbacks if needed.\n\nSigned-off-by: Magnus Damm \u003cdamm@opensource.se\u003e\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\n" }, { "commit": "78352282f3960fa2a60af363749c14b4c138bc63", "tree": "16a5ed16a9bd93db834638487899cc233eb2b252", "parents": [ "3dfad123e81cdf11642aa63da1149ee71a369d2d" ], "author": { "name": "Jamie Iles", "email": "jamie@jamieiles.com", "time": "Mon May 23 10:22:51 2011 +0100" }, "committer": { "name": "David Woodhouse", "email": "David.Woodhouse@intel.com", "time": "Wed May 25 02:20:52 2011 +0100" }, "message": "mtd: s3c2410: remove CONFIG_MTD_PARTITIONS test\n\nMTD is now always build with partitioning support so this can be\nremoved.\n\nCc: Ben Dooks \u003cben-linux@fluff.org\u003e\nSigned-off-by: Jamie Iles \u003cjamie@jamieiles.com\u003e\nSigned-off-by: Artem Bityutskiy \u003cArtem.Bityutskiy@nokia.com\u003e\nSigned-off-by: David Woodhouse \u003cDavid.Woodhouse@intel.com\u003e\n" }, { "commit": "3dfad123e81cdf11642aa63da1149ee71a369d2d", "tree": "971642bf84d176dc7b52cfccc95a420158a0e6d7", "parents": [ "6cbbf2ffa170c4cb5f1d1c0dd0f2bd597813a002" ], "author": { "name": "Jamie Iles", "email": "jamie@jamieiles.com", "time": "Mon May 23 10:22:50 2011 +0100" }, "committer": { "name": "David Woodhouse", "email": "David.Woodhouse@intel.com", "time": "Wed May 25 02:20:48 2011 +0100" }, "message": "mtd: pxa: convert to mtd_device_register()\n\nConvert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS\npreprocessor conditionals as partitioning is always available.\n\nCc: Cc: David Woodhouse \u003cdwmw2@infradead.org\u003e\nCc: Artem Bityutskiy \u003cdedekind1@gmail.com\u003e\nSigned-off-by: Jamie Iles \u003cjamie@jamieiles.com\u003e\nSigned-off-by: Artem Bityutskiy \u003cArtem.Bityutskiy@nokia.com\u003e\nSigned-off-by: David Woodhouse \u003cDavid.Woodhouse@intel.com\u003e\n" }, { "commit": "6cbbf2ffa170c4cb5f1d1c0dd0f2bd597813a002", "tree": "bab3a3f14d4b9f5d10ecdd0c6cf9a8e2d97a4390", "parents": [ "c06addd3153af8e6ee10079e8afa2c3bb8a1516e" ], "author": { "name": "Jamie Iles", "email": "jamie@jamieiles.com", "time": "Mon May 23 10:22:49 2011 +0100" }, "committer": { "name": "David Woodhouse", "email": "David.Woodhouse@intel.com", "time": "Wed May 25 02:20:41 2011 +0100" }, "message": "mtd: ixp: convert to mtd_device_register()\n\nConvert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS\npreprocessor conditionals as partitioning is always available.\n\nCc: Imre Kaloz \u003ckaloz@openwrt.org\u003e\nCc: Krzysztof Halasa \u003ckhc@pm.waw.pl\u003e\nSigned-off-by: Jamie Iles \u003cjamie@jamieiles.com\u003e\nSigned-off-by: Artem Bityutskiy \u003cArtem.Bityutskiy@nokia.com\u003e\nSigned-off-by: David Woodhouse \u003cDavid.Woodhouse@intel.com\u003e\n" }, { "commit": "c06addd3153af8e6ee10079e8afa2c3bb8a1516e", "tree": "90ed5949c6acc1bc54e9dd9a9a6a9a3c99676b85", "parents": [ "3ee904f275ccbde7407ba7575006d94774cb20d9" ], "author": { "name": "Jamie Iles", "email": "jamie@jamieiles.com", "time": "Mon May 23 10:22:48 2011 +0100" }, "committer": { "name": "David Woodhouse", "email": "David.Woodhouse@intel.com", "time": "Wed May 25 02:20:37 2011 +0100" }, "message": "arm: mtd: gemini: convert to mtd_device_register()\n\nConvert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS\npreprocessor conditionals as partitioning is always available.\n\nCc: Hans Ulli Kroll \u003culli.kroll@googlemail.com\u003e\nSigned-off-by: Jamie Iles \u003cjamie@jamieiles.com\u003e\nSigned-off-by: Artem Bityutskiy \u003cArtem.Bityutskiy@nokia.com\u003e\nSigned-off-by: David Woodhouse \u003cDavid.Woodhouse@intel.com\u003e\n" }, { "commit": "c7f409e39e65cb007304da718b0a7b25a0144a0a", "tree": "f835f6e38b48e8ea5fad8c18be03071cf833c599", "parents": [ "0b38c4ebf037290eef27b31bdc37cacf804c7a48" ], "author": { "name": "Venkat Rao", "email": "vrao@broadcom.com", "time": "Fri Mar 25 20:37:47 2011 -0400" }, "committer": { "name": "Chris Ball", "email": "cjb@laptop.org", "time": "Tue May 24 20:59:30 2011 -0400" }, "message": "mmc: tegra: add pm_flags\n\nEnable fast bcm4329 WIFI suspend/resume on Tegra2 board.\n\nThis patch allows the mach-tegra support to tell the tegra MMC host\ncontroller to NOT turn off power for the MMC controller the WIFI part\nlives behind. Thus bcm4329 firmware doesn\u0027t need to be reloaded.\n\nSigned-off-by: Venkat Rao \u003cvrao@broadcom.com\u003e\nTested-by: Grant Grundler \u003cgrundler@chromium.org\u003e\nReviewed-by: Olof Johansson \u003colof@lixom.net\u003e\nAcked-by: Olof Johansson \u003colof@lixom.net\u003e\nSigned-off-by: Chris Ball \u003ccjb@laptop.org\u003e\n" }, { "commit": "4a7df24ddc7097cd789a7527187826552ea0765e", "tree": "2e70557e1d8e6d971ee6094de823900df1f8288e", "parents": [ "37d8cb5478651b27779b9a80d024c614c452eae3", "5bdfdfeed5eed599a3ddc455f7c254a209ceae8d" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue May 24 16:39:23 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue May 24 16:39:23 2011 -0700" }, "message": "Merge branch \u0027for-linus/2640/i2c\u0027 of git://git.fluff.org/bjdooks/linux\n\n* \u0027for-linus/2640/i2c\u0027 of git://git.fluff.org/bjdooks/linux: (21 commits)\n mach-ux500: set proper I2C platform data from MOP500s\n i2c-nomadik: break out single messsage transmission\n i2c-nomadik: reset the hw after status check\n i2c-nomadik: remove the unnecessary delay\n i2c-nomadik: change the TX and RX threshold\n i2c-nomadik: add code to retry on timeout failure\n i2c-nomadik: use pm_runtime API\n i2c-nomadik: print abort cause only on abort tag\n i2c-nomadik: correct adapter timeout initialization\n i2c-nomadik: remove the redundant error message\n i2c-nomadik: corrrect returned error numbers\n i2c-nomadik: fix speed enumerator\n i2c-nomadik: make i2c timeout specific per i2c bus\n i2c-nomadik: add regulator support\n i2c: i2c-sh_mobile bus speed platform data V2\n i2c: i2c-sh_mobile clock string removal\n i2c-eg20t: Support new device ML7223 IOH\n i2c: tegra: Add de-bounce cycles.\n i2c: tegra: fix repeated start handling\n i2c: tegra: recover from spurious interrupt storm\n ...\n" }, { "commit": "2b030bda66b0a59f8ebf0ce2117088256a5f9f97", "tree": "afe961d47c177caa2017f9a608e50f9f8524507a", "parents": [ "82a4413450376cbce0bb2b794fb880dbfda89299" ], "author": { "name": "Linus Walleij", "email": "linus.walleij@linaro.org", "time": "Fri May 13 12:31:13 2011 +0200" }, "committer": { "name": "Ben Dooks", "email": "ben-linux@fluff.org", "time": "Wed May 25 00:21:01 2011 +0100" }, "message": "mach-ux500: set proper I2C platform data from MOP500s\n\nThis specifies the new per-platform timeout per I2C bus and\nswitches the I2C buses to fast mode, and increase the FIFO\ndepth to 8 for reads and writes.\n\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\n" }, { "commit": "2320f504d3c87b814abf37f224ab68d52d2a512c", "tree": "ae52f9f9467ce8e57cde7c009c93fa6ad720648e", "parents": [ "9772760079253cd9a428434b43d415d18b152332" ], "author": { "name": "Linus Walleij", "email": "linus.walleij@linaro.org", "time": "Fri May 13 12:29:20 2011 +0200" }, "committer": { "name": "Ben Dooks", "email": "ben-linux@fluff.org", "time": "Wed May 25 00:20:22 2011 +0100" }, "message": "i2c-nomadik: fix speed enumerator\n\nThe I2C speed enumerators in the i2c-nomadik header file were in\nthe wrong order.\n\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\n" }, { "commit": "9772760079253cd9a428434b43d415d18b152332", "tree": "1379806baba2f945e656bd8f86db91f2398c4bfc", "parents": [ "a20d23945f30ec701a544fdd90d6537f4041af6f" ], "author": { "name": "Virupax Sadashivpetimath", "email": "virupax.sadashivpetimath@stericsson.com", "time": "Fri May 13 12:29:12 2011 +0200" }, "committer": { "name": "Ben Dooks", "email": "ben-linux@fluff.org", "time": "Wed May 25 00:20:13 2011 +0100" }, "message": "i2c-nomadik: make i2c timeout specific per i2c bus\n\nAdd option to have different i2c timeout delay for different i2c buses\nspecified in platform data. Default to the old value unless specified.\n\nSigned-off-by: Virupax Sadashivpetimath \u003cvirupax.sadashivpetimath@stericsson.com\u003e\nReviewed-by: Srinidhi Kasagar \u003csrinidhi.kasagar@stericsson.com\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\n" }, { "commit": "014322dac6ae0048c928c6ca2faf0d53194f9d15", "tree": "6c4b40ddd4a754a9ce041d97ce8488b8a66ac50d", "parents": [ "03eb14199e8a2ff2bc170b283305990151b0d619", "1a717c00501f02200fa003755e54f9fcbd2f865b" ], "author": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Wed May 25 00:11:25 2011 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Wed May 25 00:11:25 2011 +0100" }, "message": "Merge branch \u0027davinci-next\u0027 of git://gitorious.org/linux-davinci/linux-davinci into devel-stable\n" }, { "commit": "03eb14199e8a2ff2bc170b283305990151b0d619", "tree": "c16c123a850e8033b2daa71ad9ae241906542dd8", "parents": [ "d762f4383100c2a87b1a3f2d678cd3b5425655b4", "ede338f4ce2fb5ee99d18751df32fbd3b10df268" ], "author": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Wed May 25 00:08:17 2011 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Wed May 25 00:08:17 2011 +0100" }, "message": "Merge branch \u0027devicetree/arm-next\u0027 of git://git.secretlab.ca/git/linux-2.6 into devel-stable\n" }, { "commit": "1032fbfd792f2b384ac16a63993b8fae5eea9083", "tree": "9d9955103fc7aad7f59dda3f523569aca3df7b62", "parents": [ "f0e733f32e56ded9309a8b8da3a77d47beb3cbdd" ], "author": { "name": "Bengt Jonsson", "email": "bengt.g.jonsson@stericsson.com", "time": "Fri Apr 01 14:43:33 2011 +0200" }, "committer": { "name": "Linus Walleij", "email": "linus.walleij@linaro.org", "time": "Tue May 24 22:20:23 2011 +0200" }, "message": "mach-ux500: voltage domain regulators for DB8500\n\nThe DB8500 has ePOD:s (electronic power domains) which are possible\nto switch on/off to deactivate silicon blocks on the DB8500 SoC\nby cutting their power without retention. We model these as simple\nregulators with one bit on/off settings.\n\nAcked-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Bengt Jonsson \u003cbengt.g.jonsson@stericsson.com\u003e\nSigned-off-by: Sundar Iyer \u003csundar.iyer@stericsson.com\u003e\nSigned-off-by: Jonas Aberg \u003cjonas.aberg@stericsson.com\u003e\nSigned-off-by: Virupax Sadashivpetimath \u003cvirupax.sadashivpetimath@stericsson.com\u003e\nSigned-off-by: Martin Persson \u003cmartin.persson@stericsson.com\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\n" }, { "commit": "46936340c4e545f3be935b9d34e0554d16dbac30", "tree": "9c65f184d4dc3d07ee1c79f0e046cfd855fb48da", "parents": [ "8317797ca657081ed81312ea3501f3a3d59d52e9" ], "author": { "name": "Linus Walleij", "email": "linus.walleij@linaro.org", "time": "Sun May 15 19:16:38 2011 +0200" }, "committer": { "name": "Linus Walleij", "email": "linus.walleij@linaro.org", "time": "Tue May 24 22:19:55 2011 +0200" }, "message": "mach-ux500: move CPUfreq driver to cpufreq subsystem\n\nAs part of the ARM arch subsystem migration, move the DB8500\ncpufreq driver to drivers/cpufreq as discussed with Dave Jones. The\nMakefile is not updated in order to avoid cross-subsystem conflicts\nfor this file in merges.\n\nCc: Arnd Bergmann \u003carnd@arndb.de\u003e\nAcked-by: Dave Jones \u003cdavej@redhat.com\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\n" } ], "next": "8317797ca657081ed81312ea3501f3a3d59d52e9" }