)]}' { "log": [ { "commit": "b46aff9f4a67cd2b0eb61b60e5ccdd6dc51a5e5f", "tree": "b0bcf04fb24d45181b3f005b9ac1ad7226ffff2e", "parents": [ "4d4d5c59e7eb8a1fa8c92604180508ce1619f90f", "784990121c47631cc7380a054f3223a674e3d6b4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 24 04:45:34 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jan 24 04:45:34 2012 -0800" }, "message": "Merge \"msm: rpm: Refactor Low Power Mgmt drivers to support single binary\" into msm-3.0" }, { "commit": "4d4d5c59e7eb8a1fa8c92604180508ce1619f90f", "tree": "b5c29580bf4055595a3a186607deeb37e9d4efb9", "parents": [ "87e195b46e8215d98a50b7cfe28a417d9f55f15f" ], "author": { "name": "Suresh Vankadara", "email": "svankada@codeaurora.org", "time": "Wed Jan 18 00:45:49 2012 +0530" }, "committer": { "name": "Suresh Vankadara", "email": "svankada@codeaurora.org", "time": "Tue Jan 24 05:49:57 2012 +0530" }, "message": "msm: camera: update camera clocks\n\nUpdate camera clocks csi_pclk, csi_vfe_clk,\ncsi_clk, vfe_clk to support V4L2 architecture for\ncamera.\n\nChange-Id: I7bc58202f4b2709224897c345aedb5736426ea8a\nSigned-off-by: Suresh Vankadara \u003csvankada@codeaurora.org\u003e\n" }, { "commit": "87e195b46e8215d98a50b7cfe28a417d9f55f15f", "tree": "ce3e9458d3ed3f8cbeb9deb9399072415ba7e3fd", "parents": [ "20cd3be7fb800feea670e6619fa5c446f26f7743" ], "author": { "name": "Suresh Vankadara", "email": "svankada@codeaurora.org", "time": "Wed Jan 18 00:42:58 2012 +0530" }, "committer": { "name": "Suresh Vankadara", "email": "svankada@codeaurora.org", "time": "Tue Jan 24 05:43:28 2012 +0530" }, "message": "msm: board-msm7627a-camera: Add support to V4L2\n\nUpdate camera board file to support V4L2 architecture\nfor camera.\n\nSigned-off-by: Suresh Vankadara \u003csvankada@codeaurora.org\u003e\nChange-Id: I7b8c112969fc4b629556e8ed80fdb31d182d4530\n" }, { "commit": "20cd3be7fb800feea670e6619fa5c446f26f7743", "tree": "b1a600815e40b712ea0a5ffbc153f05db6570439", "parents": [ "8df2c7555829d53b02122360e6958c15a6753179" ], "author": { "name": "Suresh Vankadara", "email": "svankada@codeaurora.org", "time": "Wed Jan 18 00:34:06 2012 +0530" }, "committer": { "name": "Suresh Vankadara", "email": "svankada@codeaurora.org", "time": "Tue Jan 24 05:42:32 2012 +0530" }, "message": "msm: devices-msm7x27a: Add support for platform devices\n\nIn V4L2 camera architecture all camera supported blocks\nare added as platform devices. To support V4L2 camera\narchitecture, convert CSIC, VFE as platform devices\n\nSigned-off-by: Suresh Vankadara \u003csvankada@codeaurora.org\u003e\nChange-Id: I95fbb273f1af31a2597e444be21bd69ac9a64034\n" }, { "commit": "8df2c7555829d53b02122360e6958c15a6753179", "tree": "7da05fcb02333290490aba70d60e0bb76d1f1095", "parents": [ "848bbb91be354d9bde3bacaadcc3dde9342cd236" ], "author": { "name": "Suresh Vankadara", "email": "svankada@codeaurora.org", "time": "Wed Jan 18 00:18:03 2012 +0530" }, "committer": { "name": "Suresh Vankadara", "email": "svankada@codeaurora.org", "time": "Tue Jan 24 05:39:29 2012 +0530" }, "message": "msm: camera: Add flags to camera supported blocks\n\nAdd is_vpe, is_csiphy, is_csid and is_ispif flags for\n8960 and 8930 camera. These flags are used to execute\nthe code based on the subsystems supported by camera\nfor a particular target.\n\nChange-Id: I3ca0e51aac7d8b221e6784290149c19767c64673\nSigned-off-by: Suresh Vankadara \u003csvankada@codeaurora.org\u003e\n" }, { "commit": "848bbb91be354d9bde3bacaadcc3dde9342cd236", "tree": "b0db5451d5b4d24217281d59434d32c1dfbd753f", "parents": [ "350b31124c9b1088e7ca3345e42dcf0ac0166248", "39af737bd768cb7c8e131698af14503ba63d398f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jan 23 08:31:58 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jan 23 08:31:58 2012 -0800" }, "message": "Merge \"usb: gadget: u_data_hsic: Reduce the number of interrupts in TX data path\" into msm-3.0" }, { "commit": "784990121c47631cc7380a054f3223a674e3d6b4", "tree": "d1fb5a273e61651c8bfff7d631e0553110ae39d6", "parents": [ "350b31124c9b1088e7ca3345e42dcf0ac0166248" ], "author": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Tue Nov 01 17:15:17 2011 -0600" }, "committer": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Mon Jan 23 08:36:33 2012 -0700" }, "message": "msm: rpm: Refactor Low Power Mgmt drivers to support single binary\n\nMove enumeration into uint arrays that can be chosen based on\nthe device file configuration.\n\nrpm.h will have a superset of all enumeration for all targets.\nThe device file configuration will map the enumeration defined\nin rpm.h to the target specific enumeration defined in rpm-XXXX.h.\n\nDevice drivers that need to communicate with RPM will continue to\nuse the enumeration defined in rpm.h and the RPM driver will translate\nthe generic enumeration to a device specific enumeration before sending\nthe RPM message to the RPM processor.\n\nAlso refactor SPM and MPM data for the supported targets.\n\nAdd RPM, SPM, LPM and MPM driver support for APQ8064 and MSM8930 targets.\n\nSupported targets: 8660, 8960, 9615, 8930, 8064\n\nChange-Id: I0d4ed7634cb221c124bc59a946932f7ac557ef58\nSigned-off-by: Praveen Chidambaram \u003cpchidamb@codeaurora.org\u003e\n" }, { "commit": "350b31124c9b1088e7ca3345e42dcf0ac0166248", "tree": "8a50fb1c7de708d6236b03c87ced6e3c705a0590", "parents": [ "215561d045fd6a9538fb1d09da7d8a08c4e1268c", "c868a2e9fc7d1ea255a985cd5fe7b398010d7ccc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jan 23 06:56:08 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jan 23 06:56:08 2012 -0800" }, "message": "Merge \"msm: board-qrd7627a: Add support for EVB\" into msm-3.0" }, { "commit": "215561d045fd6a9538fb1d09da7d8a08c4e1268c", "tree": "a7c2de9f2382e2add38cf80b04b2c34f761c1fe4", "parents": [ "275e7d896e738552cc7d97f2e28559bcc2d013ef" ], "author": { "name": "Mallikarjuna GB", "email": "gbmalli@codeaurora.org", "time": "Mon Jan 23 13:20:38 2012 +0530" }, "committer": { "name": "Mallikarjuna GB", "email": "gbmalli@codeaurora.org", "time": "Mon Jan 23 15:55:46 2012 +0530" }, "message": "Bluetooth: HCI SMD Increase WakeLock release timeout\n\nUpper layers are not acquiring the locks properly, hence wakelock release\ntimeout is increased to 500 ms. This logic and value is derived from\nthe implementation for UART transport.\n\nCRs-fixed: 325550\n\nChange-Id: I15c39705e63ebb1fb4ccac3c42d72f0cc1e32929\nSigned-off-by: Mallikarjuna GB \u003cgbmalli@codeaurora.org\u003e\n" }, { "commit": "c868a2e9fc7d1ea255a985cd5fe7b398010d7ccc", "tree": "0bea9003cbd7bc2c6550c6fe15ae842639ef995c", "parents": [ "5fd77778263af935a67e495dbabb8c270f726c7d" ], "author": { "name": "Taniya Das", "email": "tdas@codeaurora.org", "time": "Tue Jan 03 10:18:47 2012 +0530" }, "committer": { "name": "Chintan Pandya", "email": "cpandya@codeaurora.org", "time": "Mon Jan 23 14:33:32 2012 +0530" }, "message": "msm: board-qrd7627a: Add support for EVB\n\nChange-Id: I3a131af3c21d0fd0c9d3c9543c07b45ec052953d\nSigned-off-by: Taniya Das \u003ctdas@codeaurora.org\u003e\nSigned-off-by: Chintan Pandya \u003ccpandya@codeaurora.org\u003e\n" }, { "commit": "275e7d896e738552cc7d97f2e28559bcc2d013ef", "tree": "58eca76968198a5c392683465ce4a42480ea2e09", "parents": [ "5fd77778263af935a67e495dbabb8c270f726c7d" ], "author": { "name": "Jin Hong", "email": "jinh@codeaurora.org", "time": "Thu Jan 19 17:30:28 2012 -0800" }, "committer": { "name": "Jin Hong", "email": "jinh@codeaurora.org", "time": "Sun Jan 22 19:53:18 2012 -0800" }, "message": "msm8960: defconfig: enable slub_debug by default\n\nThis reverts commit 3aa5d76f820129f5bf2e9972b7e4a22ad9da5b6f, which\nremoved overhead of page poisoning as performance and power measurement\nbegan to gain importance. Now that msm8960-perf_defconfig is in place\nand is in fact the default boot img for msm8960 Android kernel it is\nsafe to again enable the useful memory corruption detection features\nof SLUB debug. Several developers mentioned how helpful the detection\nwas for them.\n\nChange-Id: I9f962a7062b9b5d190cfa9aae616202979e0215d\nSigned-off-by: Jin Hong \u003cjinh@codeaurora.org\u003e\n" }, { "commit": "5fd77778263af935a67e495dbabb8c270f726c7d", "tree": "dfc3261288fa5f30e2d6bcbd7e9e670d96039705", "parents": [ "04d28158592099c868a54c9b7720f99ce328c10a", "f248bb7cb01156ffd6c551cf838265b8a65a5ffd" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 19:12:31 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 19:12:31 2012 -0800" }, "message": "Merge \"msm: thermal: Add MSM thermal sensing and limiting\" into msm-3.0" }, { "commit": "04d28158592099c868a54c9b7720f99ce328c10a", "tree": "16ce8b757b6e7b1ddc06c71034b167cc332ca89a", "parents": [ "a1c31afa6c3abd383396ba6241f868844e51750d", "ccd49854a0fa10b139bebd5f77ff73566149ef1f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 16:18:53 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 16:18:53 2012 -0800" }, "message": "Merge \"thermal: msm8960_tsens: Read TSENS temperature\" into msm-3.0" }, { "commit": "a1c31afa6c3abd383396ba6241f868844e51750d", "tree": "5d054eab6479f6901bdd51d841e42d93069d1e63", "parents": [ "70f779c6d358cd5dbcada69f5cc2e45522a07420", "c7d7aa888a33818f278bdce86fa6c349561e05ea" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 16:18:53 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 16:18:53 2012 -0800" }, "message": "Merge \"Revert \"msm_fb: Handle static screen update case in CABL for MDP3.0.3\"\" into msm-3.0" }, { "commit": "70f779c6d358cd5dbcada69f5cc2e45522a07420", "tree": "44a9181c2e5850057fd319a383c68e1f0f043b60", "parents": [ "767b30c135b002c745b789b45ad8d9f7376ea663", "5f968cf3da0f447e30284fbb1dfb1d82f1becee2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 14:45:41 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 14:45:41 2012 -0800" }, "message": "Merge \"msm: board-9615: Update PID \u0026 serial number for DIAG\" into msm-3.0" }, { "commit": "767b30c135b002c745b789b45ad8d9f7376ea663", "tree": "503daa32292f38e9f4f35ae1050d5646c9eaf841", "parents": [ "f103185955934a140d32da10bf6cff188480d954", "06b7e43aa204cedc16ff1d1e04bbfa734e8cc087" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 13:09:04 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 13:09:04 2012 -0800" }, "message": "Merge \"usb: mdm_bridge: Do not submit subsequent tx URBs in case of -EPROTO\" into msm-3.0" }, { "commit": "f103185955934a140d32da10bf6cff188480d954", "tree": "31c024f6f78ef80d682e3f598ed84fd67531016a", "parents": [ "8080c446106b73700217888ce3060338a28e746c", "bc2e95782c7e60aca0f4486b563223ab9bfc751d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 13:09:04 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 13:09:04 2012 -0800" }, "message": "Merge \"msm: acpuclock-8960: Activate 8064 acpu frequency scaling\" into msm-3.0" }, { "commit": "bc2e95782c7e60aca0f4486b563223ab9bfc751d", "tree": "588ecb410aacff6c27960d9713dff6792c25e7eb", "parents": [ "5fb3ca81578c709bc872163d88e9461fdb7ec33e" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Fri Nov 04 03:41:38 2011 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 11:29:12 2012 -0700" }, "message": "msm: acpuclock-8960: Activate 8064 acpu frequency scaling\n\nDo the following to enable the acpuclock driver\non the 8064:\n\n1. Add new regulator consumer entries for krait2\n and krait3.\n2. Remove cpu_is_* calls thus enabling bus and\n voltage scaling calls on the 8064.\n3. Remove the stub in the cpufreq driver that\n prevents it from initializing on the 8064.\n4. Add a call to the acpuclock init function in\n the 8064 board file, after the bus driver\u0027s\n init call.\n\nChange-Id: I4f47f51241826b4056b40b012e964a9527db58f5\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "8080c446106b73700217888ce3060338a28e746c", "tree": "8306d8e31be14ba8d5f0c14c3206e46be3c5dccf", "parents": [ "897ab0804b9dfd234703ed96a589bebd1d09faa8", "b5b08e5e0eb873b1e0bc2556e0ca34dcca55ee18" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 10:26:32 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 10:26:32 2012 -0800" }, "message": "Merge \"msm: bam_dmux: Handle DMA Mapping Failure\" into msm-3.0" }, { "commit": "897ab0804b9dfd234703ed96a589bebd1d09faa8", "tree": "154e42eb53d5aa3b57e2c72076bca7f3731f3de2", "parents": [ "5fb3ca81578c709bc872163d88e9461fdb7ec33e", "28afec421e4c35b295e4ae652febf2fdee13eb88" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 10:26:32 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 10:26:32 2012 -0800" }, "message": "Merge \"msm: kgsl: convert sg allocation to vmalloc\" into msm-3.0" }, { "commit": "5fb3ca81578c709bc872163d88e9461fdb7ec33e", "tree": "18726f778b28e95df67cc54d4370455466885e87", "parents": [ "fdcc966999e263f2999c197652811d7be303ba6a", "2c43fac27a9198da023822ddc8eba0f938e953e0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 08:53:56 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 08:53:56 2012 -0800" }, "message": "Merge changes Ib9845227,I1071f656,I714aaf89,Ided0557e,I11cb890c into msm-3.0\n\n* changes:\n msm: board-8064: Add ION heap for Audio\n msm: board-8064: Add new heap for qse comm\n msm: board-8064: Add support for adjacent heaps\n msm: board-8064: Handle unstable section overflow\n msm: board-8064: Fix overflow in memory calc.\n" }, { "commit": "fdcc966999e263f2999c197652811d7be303ba6a", "tree": "efb77e12c603be5706342e7f84589ec5037be6b4", "parents": [ "10d889e246f4ef876c2ca26b51e19125dbbe8c56", "ed61ae65262a2327ad0287793ed2be801c019570" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "message": "Merge \"msm: 8660: audio: Fix tones issue on headset in FTM.\" into msm-3.0" }, { "commit": "10d889e246f4ef876c2ca26b51e19125dbbe8c56", "tree": "afd5aab0f829250ead25c5bbdf8f6f7a9a254353", "parents": [ "10ab4b430ac7466ad0e942d9944f79eda3baef2a", "3dd6509401d44d16231002fbe8674f4e5f29a1a2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "message": "Merge \"cpufreq : Fix crash input event handler on governor switch\" into msm-3.0" }, { "commit": "10ab4b430ac7466ad0e942d9944f79eda3baef2a", "tree": "907f64719e724f74d3b8a96399950b328bb79ac7", "parents": [ "256d4d42fc402651a43d48a9c02f4685a1742825", "1a7ee899043514496a5a385fe43bc51ab9facbc8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "message": "Merge \"msm: footswitch: Move to new clock APIs\" into msm-3.0" }, { "commit": "256d4d42fc402651a43d48a9c02f4685a1742825", "tree": "6b9a4f287f8651d811ed4a681c6c933948ac8f8c", "parents": [ "0dd370bcd2d966a9f5aeb7c7fdab343e0b1f97c8", "0505835884aa3be65089b809b6c06780d40c373c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "message": "Merge \"defconfig: msm8960: enable S5K3L1YX config\" into msm-3.0" }, { "commit": "0dd370bcd2d966a9f5aeb7c7fdab343e0b1f97c8", "tree": "7d30249d986a3af01fc994ec4cd4266b7884425f", "parents": [ "dd4caf45c7e01210265acf56bb077e3f5297c2dc", "b95fb59163d88e6ec455a3422cb2b8b135364a73" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "message": "Merge \"ASoC: WCD9310: Fix sequence for clock source change\" into msm-3.0" }, { "commit": "dd4caf45c7e01210265acf56bb077e3f5297c2dc", "tree": "c976a9faf363d8b37f54476ba6f86231f626dd5e", "parents": [ "fa664da4c0ebc2f05f75cd0da0d20d9c927eae54", "6a392d3a0730367efb4f65679995c2af50cbef2f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "message": "Merge \"msm: 8930: Add ADC client\" into msm-3.0" }, { "commit": "fa664da4c0ebc2f05f75cd0da0d20d9c927eae54", "tree": "3262d73e2d873fadb6ccb487da6613753fc55a50", "parents": [ "c407d05b677726cba22b4a9c1dfbfa82113724a0", "59c90ec4a8d5a2fbbba469fc80d7a167db639073" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "message": "Merge \"msm: arch-msm: msm8x60: Fix FTM devices issue.\" into msm-3.0" }, { "commit": "c407d05b677726cba22b4a9c1dfbfa82113724a0", "tree": "bf7ff62404c3211e281c0313d4f3c5bbfbebb54c", "parents": [ "d3cf8b78782d3a3c471ab8e7de94ce7c47f95a70", "250c2e5734cb71037ad5de55ea23efb6b2ff6e5b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 03:06:06 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 03:06:06 2012 -0800" }, "message": "Merge \"msm: board-msm7627a-display: Create separate board file for display\" into msm-3.0" }, { "commit": "5f968cf3da0f447e30284fbb1dfb1d82f1becee2", "tree": "9ffd5e39423e4c393fbe6cba39810cecf8272a41", "parents": [ "d3cf8b78782d3a3c471ab8e7de94ce7c47f95a70" ], "author": { "name": "Amit Blay", "email": "ablay@codeaurora.org", "time": "Sun Jan 22 12:04:01 2012 +0200" }, "committer": { "name": "Amit Blay", "email": "ablay@codeaurora.org", "time": "Sun Jan 22 12:06:20 2012 +0200" }, "message": "msm: board-9615: Update PID \u0026 serial number for DIAG\n\nUSB Driver writes PID \u0026 serial number of DIAG port to IMEM,\nsuch that DLOAD image could read and enumerate on the same\nserial port.\n\nChange-Id: I8a8f75256228c855e0d9404b959d1d8ef6687d56\nSigned-off-by: Amit Blay \u003cablay@codeaurora.org\u003e\n" }, { "commit": "c7d7aa888a33818f278bdce86fa6c349561e05ea", "tree": "3c1a9acede1ce3b43ce44327ebe69365e004d565", "parents": [ "a374881a3a401beab2a476f35acf0c43470fe68e" ], "author": { "name": "Padmanabhan Komanduru", "email": "pkomandu@codeaurora.org", "time": "Sat Jan 21 17:17:06 2012 +0530" }, "committer": { "name": "Padmanabhan Komanduru", "email": "pkomandu@codeaurora.org", "time": "Sun Jan 22 15:07:18 2012 +0530" }, "message": "Revert \"msm_fb: Handle static screen update case in CABL for MDP3.0.3\"\n\nThis reverts commit ff77f57b5bb1cd55bfdd3a14430470829e360822.\nPatch causes histogram ioctl to fail after there is no UI update\nfor 50 ms. Abl-daemon handles static screen update case in CABL\nfrom now.\n\nChange-Id: Iddcd5b4fe0b2f99fe7b8f6b296649eee2f1f0c6e\nSigned-off-by: Padmanabhan Komanduru \u003cpkomandu@codeaurora.org\u003e\n" }, { "commit": "b5b08e5e0eb873b1e0bc2556e0ca34dcca55ee18", "tree": "52859ab7abff95318edea617badf0fc7c93bf9cc", "parents": [ "d3cf8b78782d3a3c471ab8e7de94ce7c47f95a70" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Fri Jan 20 14:19:00 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 00:43:07 2012 -0700" }, "message": "msm: bam_dmux: Handle DMA Mapping Failure\n\nHandle and recover from transient SPS and DMA\nmapping failures by:\n 1) Handle queue_rx() failures\n 2) Recover from failure by requeuing at next call\n 3) Properly unmap DMA items for failures\n 4) Log failures for later analysis\n\nCRs-Fixed: 330039\nChange-Id: I7c304921b7c4009d0c9733f317c2392241d51acc\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "28afec421e4c35b295e4ae652febf2fdee13eb88", "tree": "c93cf04f1d75687698a4218ceff5229f2f8c8806", "parents": [ "d24aaeed10430946f6e4ac3f1caec825a9a94b7e" ], "author": { "name": "Jeff Boody", "email": "jboody@codeaurora.org", "time": "Wed Jan 18 15:47:46 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 22:13:39 2012 -0700" }, "message": "msm: kgsl: convert sg allocation to vmalloc\n\nkmalloc allocates physically contiguous memory and\nmay fail for larger allocations due to fragmentation.\nThe large allocations are caused by the fact that the\nscatterlist structure is 24 bytes and the array size\nis proportional to the number of pages being mapped.\n\nCRs-fixed: 327066\nChange-Id: Ic7d15ca0399aa5c1fa01b7892cff736b3d1e4236\nSigned-off-by: Jeff Boody \u003cjboody@codeaurora.org\u003e\n" }, { "commit": "d3cf8b78782d3a3c471ab8e7de94ce7c47f95a70", "tree": "236b93e5d0b6522c2016fe13ed3c6e80e88f9db9", "parents": [ "820424dee87475b67b51bf730cbd49eebf825dfb", "04d2c83ef2bf74e9a96e35751faf08f42528b9a3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 21:07:06 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 21:07:06 2012 -0800" }, "message": "Merge \"msm: board-8064: Add RIVA/WLAN voltage regulator supplies for 8064 target\" into msm-3.0" }, { "commit": "820424dee87475b67b51bf730cbd49eebf825dfb", "tree": "ce3407062f917a6eb51e411ed8a6aff751d69efd", "parents": [ "85f5e3341223679e6f7053eec9a5a68fc65355ef", "d352b26f74591cac89bf4d501d78efcdc88a5ca3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 21:07:06 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 21:07:06 2012 -0800" }, "message": "Merge \"Bluetooth: Reading remote device lmp_version from controller.\" into msm-3.0" }, { "commit": "85f5e3341223679e6f7053eec9a5a68fc65355ef", "tree": "f5da7c4f58128e96466cfe4e41aabf0e9f6fdd2e", "parents": [ "5103c3ae368b1db81982dfdf9b989b24d93385cf", "f35fd738cb4155ac47c08c8db615237dc5e772ce" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 21:07:06 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 21:07:06 2012 -0800" }, "message": "Merge \"msm: iomap: Add QFPROM entry for TSENS\" into msm-3.0" }, { "commit": "5103c3ae368b1db81982dfdf9b989b24d93385cf", "tree": "c47e13f3b3d75a1c2b78d1a5a9a01bed6a03b2da", "parents": [ "d24aaeed10430946f6e4ac3f1caec825a9a94b7e", "4838f4164c1667556af26e0ece257ae745d987e9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 21:07:06 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 21:07:06 2012 -0800" }, "message": "Merge \"msm: bam_dmux: handle timeouts due to modem crash\" into msm-3.0" }, { "commit": "6a392d3a0730367efb4f65679995c2af50cbef2f", "tree": "39815458560e9182f84bb962e51f4b9573836cc7", "parents": [ "d24aaeed10430946f6e4ac3f1caec825a9a94b7e" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Jan 12 11:30:58 2012 -0800" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Sat Jan 21 18:12:42 2012 -0800" }, "message": "msm: 8930: Add ADC client\n\nAdd PA therm to the regulator list for LDO14. LDO14 is used\nto power the divider circuit for the PA Thermistor.\n\nChange-Id: Ic775efb3f0a24ff060776a4da92b1382e303aef6\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "2c43fac27a9198da023822ddc8eba0f938e953e0", "tree": "3803bb19b0cb28b60c15d8e682399dcf3b5c12d9", "parents": [ "f45e214c7416133ecb995533a23f23a33d908d07" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Thu Jan 19 11:06:37 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Sat Jan 21 17:47:55 2012 -0800" }, "message": "msm: board-8064: Add ION heap for Audio\n\nAdd 2.72MB ION heap for Audio to enable Audio\nto use ION for memory management. This ION heap\nwill replace pmem_audio pmem device.\n\nChange-Id: Ib98452278e08b53d4e392b225fffdb04de8530e5\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "f45e214c7416133ecb995533a23f23a33d908d07", "tree": "6300a5fbb7148c9645c577f6fe88b6e6644f3434", "parents": [ "d3d2968b11420501ce280b1c488cff14ea65bee7" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Thu Jan 19 11:01:01 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Sat Jan 21 17:47:51 2012 -0800" }, "message": "msm: board-8064: Add new heap for qse comm\n\nAdd new 1MB carveout heap required for Qualcomm Secure Executive (QSE)\ncommunications.\n\nChange-Id: I1071f6563474f8d2769c75baff68e3db06510057\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "d3d2968b11420501ce280b1c488cff14ea65bee7", "tree": "20886fb3d2a78b095b828985712f76c187abf3c3", "parents": [ "46bfffad6309a22b53ad1cc372a4a786a80e6f0e" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Thu Jan 19 10:57:07 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Sat Jan 21 17:47:47 2012 -0800" }, "message": "msm: board-8064: Add support for adjacent heaps\n\nION has to guarantee that the MM heap and FW heaps are\nadjacent to each other. This is due to a limitation\nin the hardware. Add code to ensure these heaps\nare adjacent.\n\nChange-Id: I714aaf89cc15122057b046066e53aff6c8921c24\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "46bfffad6309a22b53ad1cc372a4a786a80e6f0e", "tree": "334fac515c055344695174c6e754080b1d941457", "parents": [ "d76e3a8d7714b1cb806a815c3c8ea58000081466" ], "author": { "name": "Jack Cheung", "email": "jackc@codeaurora.org", "time": "Thu Jan 19 15:26:24 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Sat Jan 21 17:47:42 2012 -0800" }, "message": "msm: board-8064: Handle unstable section overflow\n\nIf the calculation for \u0027high\u0027 overflows, it is set to\n0xFFFFFFFF. This will cause the unstable region to be\naligned in the wrong way.\n\nThis change avoids the overflow by subtracting the\nMIN_MEMORY_BLOCK_SIZE before adding the membank size.\n\nChange-Id: Ided0557e2b1d14bbc3742d5a833674cde918d539\nSigned-off-by: Jack Cheung \u003cjackc@codeaurora.org\u003e\n" }, { "commit": "d76e3a8d7714b1cb806a815c3c8ea58000081466", "tree": "0dfa0661db55223a2de8d9eb6375066aa5a6ea60", "parents": [ "c362a4e18a530d5ceb2d14031398b08b225b03ad" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Mon Jan 16 16:55:07 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Sat Jan 21 17:47:38 2012 -0800" }, "message": "msm: board-8064: Fix overflow in memory calc.\n\nAn overflow occurs in locate_unstable_memory() when physical\nmemory address space ends at 0xFFFFFFFF. Change code to\nhandle overflow by ensuring that variables are limited to\n0xFFFFFFFF and by rearranging additions and subtractions.\n\nChange-Id: I11cb890c09ef18fe7c103cbdf1232677704fcc17\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "d24aaeed10430946f6e4ac3f1caec825a9a94b7e", "tree": "11819368e80af5118ecd6efa13e69c8dc2d7a838", "parents": [ "c362a4e18a530d5ceb2d14031398b08b225b03ad", "344e46286bba0fb6c0c7ae7bd2b09d5cd452adfa" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 17:36:55 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 17:36:55 2012 -0800" }, "message": "Merge changes I3454e773,I1e01dc35 into msm-3.0\n\n* changes:\n msm: kgsl: Make sure SLUMBER is the requested state\n msm: kgsl: Clarify the circumstances to enable SLUMBER state\n" }, { "commit": "c362a4e18a530d5ceb2d14031398b08b225b03ad", "tree": "d2d4503a018ca4843fb0050e831537efffcbf72e", "parents": [ "642729a61fe016243b9538ecd18e20ef08b16b66", "b760323c5ca321c3b9daf00f374e4b2b87fd641a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 14:43:02 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 14:43:02 2012 -0800" }, "message": "Merge changes I84b3ca1e,I41db99f8 into msm-3.0\n\n* changes:\n ASoc: msm: Add support for adie RX \u0026 TX calibration\n Revert \"msm: audio: qdsp6v2: Support for out-of-band calibration\"\n" }, { "commit": "642729a61fe016243b9538ecd18e20ef08b16b66", "tree": "0c24856b4efb24a4021b245432e8fb8e4e41535f", "parents": [ "73312bb07d618895dbe83ffc0b93ac776a910ecf", "f13358e5180bf55e6bff21aabb581b7cd9b7876d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 13:03:00 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 13:03:00 2012 -0800" }, "message": "Merge \"usb: mdm_bridge: Decrement PM-usage counter in completion handler\" into msm-3.0" }, { "commit": "73312bb07d618895dbe83ffc0b93ac776a910ecf", "tree": "c9940105f54fdad4d6d260e487de56e5871334fa", "parents": [ "279e22cf540e8ee5ecf95c9931cccda004d14f01", "0da46929eb69a01fa4b1d26a317e8fcc60a024ac" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 13:03:00 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 13:03:00 2012 -0800" }, "message": "Merge \"msm_fb: display: add mdp overlay1 writeback\" into msm-3.0" }, { "commit": "279e22cf540e8ee5ecf95c9931cccda004d14f01", "tree": "81c716dd5f98d6bffb779b98c635cf8fcc919be3", "parents": [ "6175478845642140b204e965cc9788f418330945", "4724272b4be43ed02eb77824069eb4334a853520" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 13:03:00 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 13:03:00 2012 -0800" }, "message": "Merge \"mfd: pm8xxx-misc: add an API to preload the dVdd regulator\" into msm-3.0" }, { "commit": "6175478845642140b204e965cc9788f418330945", "tree": "63e907938f77bd2eea2c5688ebf0f1a5fe2061f1", "parents": [ "c1015b37ae4ecab4aa031554565718b95b8c2354", "cf089c4da08614410c789fb61af3b712c3bd1850" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 11:43:04 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 11:43:04 2012 -0800" }, "message": "Merge \"mm: ashmem: Make sure vma is valid while flushing\" into msm-3.0" }, { "commit": "c1015b37ae4ecab4aa031554565718b95b8c2354", "tree": "24af218706deaa2364a5491792bcf81ba68cac92", "parents": [ "bd54ba08ea97285444b5f16d9b637f6d58ecca16", "3efebb52ee799e91d0fe5f820fe87a19f1e333c0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 11:43:03 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 11:43:04 2012 -0800" }, "message": "Merge \"msm: kgsl: Update graphic\u0027s bandwidth vote to match the new clock plan\" into msm-3.0" }, { "commit": "b95fb59163d88e6ec455a3422cb2b8b135364a73", "tree": "2b72da8755ec22ad7d2315a28abc9139bbfba0c1", "parents": [ "bd54ba08ea97285444b5f16d9b637f6d58ecca16" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Wed Jan 18 12:49:17 2012 -0800" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 11:09:22 2012 -0700" }, "message": "ASoC: WCD9310: Fix sequence for clock source change\n\nFor scenarios that need changing the clock source to the codec,\nthe sequence for switching the clock source was not done\ncorrectly, causing the wrong clock to be selected.\n\nIf the correct clock is not selected, it is possible that playback\nof audio might cause codec overflow issues due to mismatch in\nrate at which the codec can consume data and rate at which data is\nmade availabe to the codec.\nFix the sequence for switching the clock source, this avoids\npossible overflow issue during audio playback.\n\nCRs-fixed: 329223\nChange-Id: I410a4dd65cc236c28b788bc5b02db5237157ea6b\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n" }, { "commit": "0505835884aa3be65089b809b6c06780d40c373c", "tree": "8af3448ba23c14227419e222097bc9194b4f87f6", "parents": [ "ae2b5ab8c72ed768d31abefeec99af445f073dc2" ], "author": { "name": "Sreesudhan Ramakrish Ramkumar", "email": "srramku@codeaurora.org", "time": "Tue Dec 06 09:40:21 2011 -0800" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 08:46:07 2012 -0700" }, "message": "defconfig: msm8960: enable S5K3L1YX config\n\nChange-Id: I4fb8c11ee7d817275e1bda2c2d56b03370ff46b9\nSigned-off-by: Sreesudhan Ramakrish Ramkumar \u003csrramku@codeaurora.org\u003e\n" }, { "commit": "bd54ba08ea97285444b5f16d9b637f6d58ecca16", "tree": "98881f76bf79611d11794fb45158a61df6bf98fd", "parents": [ "ae2b5ab8c72ed768d31abefeec99af445f073dc2", "60eaeabda563156525247dc6e19480a2caa244f5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 07:38:45 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 07:38:45 2012 -0800" }, "message": "Merge \"msm: board-8960: Handle unstable section overflow\" into msm-3.0" }, { "commit": "ae2b5ab8c72ed768d31abefeec99af445f073dc2", "tree": "b0cfa1582155a5b607f41baad71b423d61237b11", "parents": [ "12f522c922a7d30379dc91bd72e111195a414b48", "4b931ed127737e1cd97c29f576d0606d7f0fb644" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 04:44:57 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 04:44:57 2012 -0800" }, "message": "Merge \"msm: smd: fix legacy DS port registration\" into msm-3.0" }, { "commit": "12f522c922a7d30379dc91bd72e111195a414b48", "tree": "68b193ef10c26c64931c5cfc3d372ccbb76b83be", "parents": [ "a374881a3a401beab2a476f35acf0c43470fe68e", "a1df77e4b88f5b485f424d6d5825849bda203820" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 04:44:57 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 04:44:57 2012 -0800" }, "message": "Merge \"USB: android: Handle error conditions in init() function\" into msm-3.0" }, { "commit": "a374881a3a401beab2a476f35acf0c43470fe68e", "tree": "6e0a80d87af3f226038a9e853728f523d7589558", "parents": [ "41dfc8d7d0c991f5fd7f2276772d26f57930aae0", "bedd1e89b4b45c91ba508a299e9f1607824a07d0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 01:32:06 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 01:32:06 2012 -0800" }, "message": "Merge changes I19782fbe,I506ba0e0,Ie793932c,Ic92995ec,I611bce3e into msm-3.0\n\n* changes:\n defconfig: msm-copper: Enable SPARSE_IRQ\n msm: board-dt: Convert to use 0 preallocated interrupts\n arm: irq: Allow for specification of no preallocated irqs\n msm: msmcopper: Increase NR_MSM_IRQS to 1020\n msm: board-copper: Convert gic to use of_irq_init API\n" }, { "commit": "59c90ec4a8d5a2fbbba469fc80d7a167db639073", "tree": "116c93aee61bc04e60f0655499b0ce508020a1f7", "parents": [ "5fedce4a0ea3996a4ee0246b80065fbdb5dd37e2" ], "author": { "name": "Laxminath Kasam", "email": "lkasam@codeaurora.org", "time": "Fri Jan 13 15:41:58 2012 +0530" }, "committer": { "name": "Laxminath Kasam", "email": "lkasam@codeaurora.org", "time": "Sat Jan 21 13:08:33 2012 +0530" }, "message": "msm: arch-msm: msm8x60: Fix FTM devices issue.\n\n-FTM devices are not getting listed in mm-audio-alsa-test.\nFTM Verification fails.\n-Update board file to add FTM devices to final device list.\n\nChange-Id: Ibb0b23195e4e976a867f30f9b16c630e2e5e88fa\nCRs-Fixed: 326843\nSigned-off-by: Laxminath Kasam \u003clkasam@codeaurora.org\u003e\n" }, { "commit": "1a7ee899043514496a5a385fe43bc51ab9facbc8", "tree": "f0017ca1be126b6520b7a3d67598fefe152ee614", "parents": [ "41dfc8d7d0c991f5fd7f2276772d26f57930aae0" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Tue Jan 17 18:56:28 2012 -0800" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Fri Jan 20 22:53:19 2012 -0800" }, "message": "msm: footswitch: Move to new clock APIs\n\nWhat was once done by just clk_enable() is being split into two\nfunctions: clk_prepare() and clk_enable(), where the prepare\nfunction may sleep but the enable function will not. The same\nis true for the clk_disable() function.\n\nReplace use of clk_enable() and clk_disable() with calls to\nclk_prepare_enable() and clk_disable_unprepare(), respectively.\nThese macros are combinations of the APIs described above and\nare safe to use in the footswitch driver since they are not\ncalled from atomic context.\n\nChange-Id: Ic51e17304f0a046d213226b1e93c7f71ef3d9a9b\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "f248bb7cb01156ffd6c551cf838265b8a65a5ffd", "tree": "25a56e576aec5087246264471acd735e75058d24", "parents": [ "949f2c999c468f4c3c6b92fcdef71879fe1af652" ], "author": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Fri Jan 20 11:38:44 2012 -0700" }, "committer": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Fri Jan 20 19:48:50 2012 -0700" }, "message": "msm: thermal: Add MSM thermal sensing and limiting\n\nAdd a thermal driver to poll and detect any thermal condition at boot\nand limit max cpu frequency on a thermal condition. This driver is\nintended to limit cpu thermal output until the userspace thermald\nkicks in. The thermald will disable this driver and take over the\ncpu thermal sensing and mitigation.\n\nChange-Id: I2710bfdeb5bf01c864437e13da835621d1b9202c\nSigned-off-by: Praveen Chidambaram \u003cpchidamb@codeaurora.org\u003e\n" }, { "commit": "b760323c5ca321c3b9daf00f374e4b2b87fd641a", "tree": "9f910b1358c20f16492348c9370dfb0d7e6b1e02", "parents": [ "c1bb79eed349ca789edb4c62a5d309f00066e963" ], "author": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Wed Nov 23 17:16:27 2011 -0800" }, "committer": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Fri Jan 20 17:10:55 2012 -0800" }, "message": "ASoc: msm: Add support for adie RX \u0026 TX calibration\n\nAdd support for adie RX \u0026 TX calibration. This calibration\nis used for RMC and speaker protection. A non-blocking\nfunction was created for AFE memory map since it is now\nbeing called from an atomic process and the acdb driver\nwas changed to use to use atomic variables.\n\nChange-Id: Id6c6ca7a303ef5ee5d23a9932e910e6a7a08805d\nSigned-off-by: Ben Romberger \u003cbromberg@codeaurora.org\u003e\n" }, { "commit": "c1bb79eed349ca789edb4c62a5d309f00066e963", "tree": "e21288d14d5568d3cc610198c86611963732f75f", "parents": [ "7c6b53848cd011712a69f3f0a92e19a44ea6c946" ], "author": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Fri Jan 13 21:48:35 2012 -0800" }, "committer": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Fri Jan 20 17:08:22 2012 -0800" }, "message": "Revert \"msm: audio: qdsp6v2: Support for out-of-band calibration\"\n\nThis reverts commit b4f562ae36c45a1f0df24f7606e2eeb34f9a9aa3.\nThe above patch incorrectly packs voice volume calibration.\n\nChange-Id: I41db99f8716c2ee4a7367d118b7b901f549dba2f\nSigned-off-by: Ben Romberger \u003cbromberg@codeaurora.org\u003e\n" }, { "commit": "41dfc8d7d0c991f5fd7f2276772d26f57930aae0", "tree": "cc00d7c7502f4b55e44bbc76ad84e7ef2dbd99d5", "parents": [ "7c6b53848cd011712a69f3f0a92e19a44ea6c946", "82b7e3fafcc8a6749e61b0854da79c93f6082faf" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 16:56:08 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 16:56:08 2012 -0800" }, "message": "Merge \"msm: 8064: Add machine records for cdp, mtp and liquid.\" into msm-3.0" }, { "commit": "04d2c83ef2bf74e9a96e35751faf08f42528b9a3", "tree": "c6524331f279b3e25b5f4250d8e6e7766d057329", "parents": [ "7c6b53848cd011712a69f3f0a92e19a44ea6c946" ], "author": { "name": "Subramanian Srinivasan", "email": "subrsrin@codeaurora.org", "time": "Tue Jan 17 11:26:36 2012 -0800" }, "committer": { "name": "Subramanian Srinivasan", "email": "subrsrin@codeaurora.org", "time": "Fri Jan 20 16:22:47 2012 -0800" }, "message": "msm: board-8064: Add RIVA/WLAN voltage regulator supplies for 8064 target\n\nProvides RIVA/WLAN regulator mappings for 8064 target.\nAdds support for RIVA in APQ 8064 target.\n\nChange-Id: Id8d977169d7fe7ff03770725caf4ec3b84551701\nSigned-off-by: Subramanian Srinivasan \u003csubrsrin@codeaurora.org\u003e\n" }, { "commit": "4838f4164c1667556af26e0ece257ae745d987e9", "tree": "2f1b0bc6e934fc7afbf11302fd9efa0ff83cfa26", "parents": [ "7c6b53848cd011712a69f3f0a92e19a44ea6c946" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Fri Jan 20 11:19:37 2012 -0700" }, "committer": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Fri Jan 20 17:18:17 2012 -0700" }, "message": "msm: bam_dmux: handle timeouts due to modem crash\n\nIf bam_dmux times out waiting for a response from the modem, we assume it\nhas crashed. Therefore, prepare for modem restart if enabled, otherwise\nreport the error with BUG as we are in an unrecoverable state\n\nChange-Id: I5f2419eae721a735a2396693da9fa2d28b14f122\nCRs-Fixed: 331808\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n" }, { "commit": "ccd49854a0fa10b139bebd5f77ff73566149ef1f", "tree": "2d529d09868d3fc0e40e22c52444bcdedd78ecb4", "parents": [ "7b754271f10beedc64d7015abc30fa38591c29c6" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Fri Jan 20 15:06:40 2012 -0800" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Fri Jan 20 15:36:59 2012 -0800" }, "message": "thermal: msm8960_tsens: Read TSENS temperature\n\nAdd kernel API to read TSENS temperature for clients\nin the kernel space. Currently the TSENS driver only\nsupports reading the TSENS temperature from the\nthermal sys.\n\nSplit the TSENS initialization into two parts.\nFirst is to perform the initial calibration that is\nused to convert the raw ADC code to Degrees Celcius\nand initialize the TSENS HW. Second is to register the\nTSENS driver to the linux thermal framework and create\nthe temperature zones that will be accessed by the\nThermal daemon to set thresholds, read the temperature\nand receive notifications.\n\nChange-Id: Id2305a7aa755e1e9cfaecd8b5c1870ed05d9b5e9\nSigned-off-by: Praveen Chidambaram \u003cpchidamb@codeaurora.org\u003e\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "06b7e43aa204cedc16ff1d1e04bbfa734e8cc087", "tree": "256a7c0fa53aa03d9ca46c53ad957a74af2d9382", "parents": [ "1aa4848c00a370a2d7cf5d779da055fce19f037d" ], "author": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Thu Jan 19 22:13:50 2012 -0800" }, "committer": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Fri Jan 20 15:34:16 2012 -0800" }, "message": "usb: mdm_bridge: Do not submit subsequent tx URBs in case of -EPROTO\n\nWhen a write callback returns -EPROTO, treat it as if the device is\ndisconnected and disallow further calls to write. This will allow the\ncaller to gracefully handle the error until a disconnect event finally\ncomes and is able to notify the caller via a platform_device removal.\n\nChange-Id: Ic780281cb5486cb5177cd642d244d2451fde1d07\nSigned-off-by: Hemant Kumar \u003chemantk@codeaurora.org\u003e\n" }, { "commit": "7c6b53848cd011712a69f3f0a92e19a44ea6c946", "tree": "7cf55d62c296322d16d6cf84af32add1ebb4b998", "parents": [ "3074cc33aa75152039403b3ede8021a24d3233e5", "f752bf6a2822801d5fdf9178bfe2b257b8d49778" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 14:12:37 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 14:12:37 2012 -0800" }, "message": "Merge \"pmem: Fix a possible NULL pointer dereference\" into msm-3.0" }, { "commit": "3074cc33aa75152039403b3ede8021a24d3233e5", "tree": "671c56f1756374ccc87560250812d044b5345c6c", "parents": [ "a0d95f738886519a95c8aaae1a8a281510ce5128", "2d09e5fe33a8e62d7d78d74f1d4db4db94456fad" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 14:12:36 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 14:12:37 2012 -0800" }, "message": "Merge \"USB: OTG: msm: Implement data contact detection based on timeout\" into msm-3.0" }, { "commit": "a0d95f738886519a95c8aaae1a8a281510ce5128", "tree": "5cdf8944dab128abee8cd6fc2c22efe9cab7a6b0", "parents": [ "55379fa4b4f5214e89f35783b47b1be7d5c9f9f5", "6074aba266f680045e4f4978711c1999e12f5ee6" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 14:12:37 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 14:12:37 2012 -0800" }, "message": "Merge changes I05a7d9c4,Ib568df71,Ibd79e983 into msm-3.0\n\n* changes:\n msm: bam_dmux: Prevent UL Powerdown due to modem flow control\n msm: bam_dmux: cleanup ioremap_nocache() handle during error handling\n msm: bam_dmux: extend tx list lock around sps_transfer_one()\n" }, { "commit": "55379fa4b4f5214e89f35783b47b1be7d5c9f9f5", "tree": "0eec98fd6a1fefafad825326aa962c6e41732022", "parents": [ "82266437ff4c15706205a002b638a7814a18f807", "aae6146a8caed435807c0e0a39093472523f7490" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 14:12:36 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 14:12:37 2012 -0800" }, "message": "Merge \"Bluetooth: Prioritize event packets over data packets\" into msm-3.0" }, { "commit": "82266437ff4c15706205a002b638a7814a18f807", "tree": "9df6b7a9a10f6234942fd2f3a29a255f3963e14f", "parents": [ "a6d84e4596b0797673f4a1ce35f9374d2491bbdc", "b3d06a032fccae8198173d3ff9472fbcf77e6e5b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 11:49:25 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 11:49:25 2012 -0800" }, "message": "Merge \"ASoC: msm: Add HDMI hostless front end driver\" into msm-3.0" }, { "commit": "a6d84e4596b0797673f4a1ce35f9374d2491bbdc", "tree": "23aef293dbfdc76ee0b4741ad9baedc256ec50a4", "parents": [ "1aa4848c00a370a2d7cf5d779da055fce19f037d", "2235a405d803fd372c7c343cac10de6105462e03" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 11:49:25 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 11:49:25 2012 -0800" }, "message": "Merge \"msm: msm_bus: Fix aggregation of clocks in active-only context\" into msm-3.0" }, { "commit": "39af737bd768cb7c8e131698af14503ba63d398f", "tree": "8799ac7463a71eb951df6d992d8e6e5a898f3de0", "parents": [ "1aa4848c00a370a2d7cf5d779da055fce19f037d" ], "author": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Thu Jan 12 14:08:27 2012 -0800" }, "committer": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Fri Jan 20 11:49:14 2012 -0800" }, "message": "usb: gadget: u_data_hsic: Reduce the number of interrupts in TX data path\n\nRmnet gadget driver sets IOC bit for every request having IP packet\ndata in TX direction. This causes the driver to spend more time in\nservicing interrupts which degrades the overall performance of the\ndriver. Hence reduce the number of interrupts by setting IOC bit for\ncertain number of requests being queued.\n\nChange-Id: I9fa926b2a08eef2bd776f1b9943546666a8b8997\nSigned-off-by: Hemant Kumar \u003chemantk@codeaurora.org\u003e\n" }, { "commit": "4724272b4be43ed02eb77824069eb4334a853520", "tree": "21e410323616a9b2d6d18955f83c0d04169ada36", "parents": [ "797bef9b610ca70e41c925febd8cf1d5fed0f3c6" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Fri Jan 20 11:34:58 2012 -0800" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Fri Jan 20 11:34:58 2012 -0800" }, "message": "mfd: pm8xxx-misc: add an API to preload the dVdd regulator\n\nAdd a new API, pm8xxx_preload_dVdd, which will preload the dVdd\nregulator on PMIC PM8901 chips during off state. This can help\nto reduce fluctuations in the dVdd voltage during startup at the\ncost of additional off state current draw.\n\nThis API should only be called if dVdd startup issues are\nsuspected.\n\nChange-Id: Ic7ee60539de37a761bb9ca6c5200327a7b99da89\nCRs-Fixed: 326086\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "cf089c4da08614410c789fb61af3b712c3bd1850", "tree": "0d93ade65db98b376e5bd84adae97f93ef7615c5", "parents": [ "1aa4848c00a370a2d7cf5d779da055fce19f037d" ], "author": { "name": "Shubhraprakash Das", "email": "sadas@codeaurora.org", "time": "Thu Dec 22 14:28:07 2011 -0700" }, "committer": { "name": "Shubhraprakash Das", "email": "sadas@codeaurora.org", "time": "Fri Jan 20 12:26:47 2012 -0700" }, "message": "mm: ashmem: Make sure vma is valid while flushing\n\nEnsure that the vma that the ashmem region is tied to\nis valid before flushing and hold the mm semaphore so\nthat the vma does not get destroyed from under while\nit\u0027s being flushed.\n\nCRs-Fixed: 326685\nChange-Id: I86320ffe9e6570e6ffa7dda68ab26be7aed86afd\nSigned-off-by: Shubhraprakash Das \u003csadas@codeaurora.org\u003e\n" }, { "commit": "f13358e5180bf55e6bff21aabb581b7cd9b7876d", "tree": "685bbe0865d86cc0b8bb003323f6915ffc38e919", "parents": [ "1aa4848c00a370a2d7cf5d779da055fce19f037d" ], "author": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Thu Jan 19 12:07:20 2012 -0800" }, "committer": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Fri Jan 20 11:26:37 2012 -0800" }, "message": "usb: mdm_bridge: Decrement PM-usage counter in completion handler\n\nmdm bridge control driver increments the PM usage counter before\nsubmitting the tx URB, but counter was never decremented after that,\nwhich prevents the device from entering suspend.\n\nChange-Id: I3bf9cf0de876a53c21cc0edd8fdeeb0fe20a4905\nSigned-off-by: Hemant Kumar \u003chemantk@codeaurora.org\u003e\n" }, { "commit": "1aa4848c00a370a2d7cf5d779da055fce19f037d", "tree": "e29c35fa8e2a1a0e9f16b01454248147f70fbcac", "parents": [ "797bef9b610ca70e41c925febd8cf1d5fed0f3c6", "3d1d6e4b0c1f31b914328c6db797409f6abaf124" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 10:15:01 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 10:15:01 2012 -0800" }, "message": "Merge \"radio: iris: Fix the crash with get signal threshold command.\" into msm-3.0" }, { "commit": "3efebb52ee799e91d0fe5f820fe87a19f1e333c0", "tree": "5564df230c0b11f201fb0b445b81ffffc53669b6", "parents": [ "10e435cc9b836a71dc648d5e752d1614d517ec67" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Tue Jan 17 12:58:38 2012 -0700" }, "committer": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Fri Jan 20 11:10:50 2012 -0700" }, "message": "msm: kgsl: Update graphic\u0027s bandwidth vote to match the new clock plan\n\nGraphics lowest power level is designed to run at SVS. The bandwidth\nmust be lowered to hit that target.\n\nChange-Id: I8aea654ab9aafba89b4773174ea339766573c3f3\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "60eaeabda563156525247dc6e19480a2caa244f5", "tree": "67a4b8a39bcc402a57980cafc5ea6c1e71a3861b", "parents": [ "797bef9b610ca70e41c925febd8cf1d5fed0f3c6" ], "author": { "name": "Jack Cheung", "email": "jackc@codeaurora.org", "time": "Mon Jan 09 16:40:26 2012 -0800" }, "committer": { "name": "Jack Cheung", "email": "jackc@codeaurora.org", "time": "Fri Jan 20 09:50:24 2012 -0800" }, "message": "msm: board-8960: Handle unstable section overflow\n\nIf the calculation for \u0027high\u0027 overflows, it is set to\n0xFFFFFFFF. This will cause the unstable region to be\naligned in the wrong way.\n\nThis change avoids the overflow by subtracting the\nMIN_MEMORY_BLOCK_SIZE before adding the membank size.\n\nChange-Id: Ie2b5f2ce0a6ddc6cdffa7554957bd458cf744e5d\nSigned-off-by: Jack Cheung \u003cjackc@codeaurora.org\u003e\n" }, { "commit": "797bef9b610ca70e41c925febd8cf1d5fed0f3c6", "tree": "af86a3ad943a1668be290dc635631beab557e47c", "parents": [ "96dd983b52c2f00a7e430012a5149912a38c418e", "966dcfae8213ddfd2b291f4c54aab9778f6d1ef1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 08:40:30 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 08:40:30 2012 -0800" }, "message": "Merge \"Bluetooth: Fix timeout configuration for AMP channels\" into msm-3.0" }, { "commit": "96dd983b52c2f00a7e430012a5149912a38c418e", "tree": "b1d0eb7be9dd7ef5bed58819958efc4dfd419dce", "parents": [ "0d8ca48152a755703e333aed3a02014db03d24ae", "e8bc7aaf986e1b4120f56cc2be9a35ca22a8db7c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 08:40:30 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 08:40:30 2012 -0800" }, "message": "Merge \"gpu: ion: Increment the ref count in mmap\" into msm-3.0" }, { "commit": "0d8ca48152a755703e333aed3a02014db03d24ae", "tree": "a667736b0cf7a3c40f787e5b829aaabc092059e3", "parents": [ "77670789ba0be416e639ec8939964acd4c4a8693", "257b4192a9e73f55457cd56c890ba2d8de3c8f3f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 08:40:30 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 08:40:30 2012 -0800" }, "message": "Merge \"msm: camera: Fix the VPE state machine to avoid multiple VPE disable.\" into msm-3.0" }, { "commit": "77670789ba0be416e639ec8939964acd4c4a8693", "tree": "8d5fb3ce7c29da159699625bf52df6d702d34415", "parents": [ "296ee48e9ac0cc8a3df3eaa5a24131a700c2974b", "36466aee75e3bd66a8b79ba23ea00b59d883546e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 08:40:30 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 08:40:30 2012 -0800" }, "message": "Merge \"msm: clock-8960: Switch adm to ebi1_clk\" into msm-3.0" }, { "commit": "296ee48e9ac0cc8a3df3eaa5a24131a700c2974b", "tree": "f59870d5b448603261d2100146d742edcac96c77", "parents": [ "fb090cf1fdda9347c89885ba18e3f946c75cfa1a", "433149a4157a8fc8673df8c6c639da21b135b407" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 07:14:55 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 07:14:55 2012 -0800" }, "message": "Merge \"ASoC: wcd9310: Address occasional DCE failures\" into msm-3.0" }, { "commit": "fb090cf1fdda9347c89885ba18e3f946c75cfa1a", "tree": "2ad00efe0e2d832fa824d609ce52ebe72a46734a", "parents": [ "40a96e726dcf14fc4dad9581b4b9d2f7824f0000", "228895ae217589ca71aa464f7c22bc4cedd06f77" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 07:14:55 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 07:14:55 2012 -0800" }, "message": "Merge \"msm_fb: HDMI: Correct order for BKSV read operation\" into msm-3.0" }, { "commit": "40a96e726dcf14fc4dad9581b4b9d2f7824f0000", "tree": "fef44d91df1f7cfe3bd5d4af1f2c538e5e61e655", "parents": [ "4817058084e7dbc2c10e7056d1e4528dc6a06091", "8b803e975369e89b3d0061f5a1e9048942d0543a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 07:14:55 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 07:14:55 2012 -0800" }, "message": "Merge \"msm: kgsl: Be explicit about what states may access hw\" into msm-3.0" }, { "commit": "4817058084e7dbc2c10e7056d1e4528dc6a06091", "tree": "3d67daf2d350476c421ceb7e1b4294428ef2bc6e", "parents": [ "646bd33dd3d3de43fc8c748692a47fe641def8d7", "fc81e10421b055303c2459fd52e19a57e2aff31e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 05:40:25 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 05:40:26 2012 -0800" }, "message": "Merge \"msm-camera: Add support for YV12 preview format\" into msm-3.0" }, { "commit": "ed61ae65262a2327ad0287793ed2be801c019570", "tree": "b5c581d07f9844c0250400579c1ae04e8daa30c0", "parents": [ "089ec2e761dcffc2c2e3fda6dee59d74f481374b" ], "author": { "name": "Laxminath Kasam", "email": "lkasam@codeaurora.org", "time": "Fri Jan 20 17:12:36 2012 +0530" }, "committer": { "name": "Laxminath Kasam", "email": "lkasam@codeaurora.org", "time": "Fri Jan 20 17:59:51 2012 +0530" }, "message": "msm: 8660: audio: Fix tones issue on headset in FTM.\n\n-Play tones in FTM mode,for testcase 1 it is expected to\nplay only on left headset but audible in both\nL\u0026R headset.\n-The device profile is enabling the right channel also,\nwhere the test case is to enable only the left channel.\n-changed the register 0x31 with 0xC5(disabling the\nright channel),this will fix the issue.\n\nChange-Id: I17331f6f2ea8d40c47e5720ae262458536f44094\nCRs-Fixed: 332075\nSigned-off-by: Laxminath Kasam \u003clkasam@codeaurora.org\u003e\n" }, { "commit": "646bd33dd3d3de43fc8c748692a47fe641def8d7", "tree": "5b9b42f51efd2587bfb0053b1aea79981f9445e2", "parents": [ "87c8d39d245b3ea0311e97e579ee5f83bb99ba25", "d01fd83bf9182b0a37abb3c4a2b9cd5e8ced4bd5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 04:12:37 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 04:12:37 2012 -0800" }, "message": "Merge \"msm: 8960: Add correct PASR mask support\" into msm-3.0" }, { "commit": "87c8d39d245b3ea0311e97e579ee5f83bb99ba25", "tree": "a35e73acf4907d2b7e50a05a88da79123321450c", "parents": [ "9d7ddd4d9a29e494d740a6ff892987fa12e755f1", "acf149d4a0ca82feb78d5efe75bcb2bfd4d67939" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 04:12:37 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 04:12:37 2012 -0800" }, "message": "Merge \"regulator: Add devm_regulator_get()\" into msm-3.0" }, { "commit": "9d7ddd4d9a29e494d740a6ff892987fa12e755f1", "tree": "7397492da875745ed1fd8a766b34cf3c43330bce", "parents": [ "568dd5fa1649aef428f79c4907712b129f998ff9", "466e6b9f59d0035a3758732be5030e53bdcdb99a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 04:12:37 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 04:12:37 2012 -0800" }, "message": "Merge \"ASoC: msm: Add missing mutex_unlock for error condition failure cases\" into msm-3.0" }, { "commit": "568dd5fa1649aef428f79c4907712b129f998ff9", "tree": "0000df7ffe9ec8d2f080dcfcc09a5a4e9d9a9ef7", "parents": [ "34cf1fc16a9b1e358dbb7b452eb993e0f217036d", "6764fd9f8a0d1cb1f9bbff4100fda0df6aeafafc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 04:12:37 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 04:12:37 2012 -0800" }, "message": "Merge \"binder: Quiet binder\" into msm-3.0" }, { "commit": "a1df77e4b88f5b485f424d6d5825849bda203820", "tree": "5a7c38828aa6f73b3075252f5b26cc7e7b8b122e", "parents": [ "ca6a61e107c7010ea7f719cbf853841278e6d318" ], "author": { "name": "Rajkumar Raghupathy", "email": "raghup@codeaurora.org", "time": "Thu Jan 19 17:45:55 2012 +0530" }, "committer": { "name": "Rajkumar Raghupathy", "email": "raghup@codeaurora.org", "time": "Fri Jan 20 17:22:15 2012 +0530" }, "message": "USB: android: Handle error conditions in init() function\n\nWhen the usb_compostite_probe function fails, the USB enumeration fails.\nHence accessing the USB related sysfs entries results in null pointer\ndereference crash.\n\nThis change fixes it by handling all possible error conditions and\ndestroy the sysfs entries in the init() function.\n\nChange-Id: Ic9cb569eef2d4076aff1acd8fc679bc762f300f7\nSigned-off-by: Rajkumar Raghupathy \u003craghup@codeaurora.org\u003e\n" }, { "commit": "fc81e10421b055303c2459fd52e19a57e2aff31e", "tree": "6691734a02eb9d08e7cfb08c0ce4fa8a2a961c69", "parents": [ "34cf1fc16a9b1e358dbb7b452eb993e0f217036d" ], "author": { "name": "Alekhya,Monika", "email": "malekh@codeaurora.org", "time": "Thu Dec 29 15:17:33 2011 +0530" }, "committer": { "name": "Alekhya,Monika", "email": "malekh@codeaurora.org", "time": "Fri Jan 20 17:12:20 2012 +0530" }, "message": "msm-camera: Add support for YV12 preview format\n\nEnable camera driver to output preview frames in YV12 format.\n\nChange-Id: Ib4e358460eb922c6a06314682380c4de30f81319\nSigned-off-by: Alekhya,Monika \u003cmalekh@codeaurora.org\u003e\n" }, { "commit": "250c2e5734cb71037ad5de55ea23efb6b2ff6e5b", "tree": "cfee6abfb1e60a3d30a973b375ebd004e1a0a78d", "parents": [ "34cf1fc16a9b1e358dbb7b452eb993e0f217036d" ], "author": { "name": "Chintan Pandya", "email": "cpandya@codeaurora.org", "time": "Thu Jan 19 17:15:49 2012 +0530" }, "committer": { "name": "Chintan Pandya", "email": "cpandya@codeaurora.org", "time": "Fri Jan 20 15:05:07 2012 +0530" }, "message": "msm: board-msm7627a-display: Create separate board file for display\n\nVarious variants of 7627a uses common display code which is\nduplicated over multiple board files. So, move out the common\ncode for display into separate board file to avoid rebase\nissues during new board bring up and maintenance.\n\nChange-Id: Ibf3558e5b26dfbd9f056c0f5f78f4bf8573ca642\nSigned-off-by: Chintan Pandya \u003ccpandya@codeaurora.org\u003e\n" }, { "commit": "34cf1fc16a9b1e358dbb7b452eb993e0f217036d", "tree": "6e836210dc3e7361f2110d0814723fe95427dad5", "parents": [ "a56f880f2bc20182c1ffa4ca25a9799fca93bc94", "66f7f1ea5a32845eed2d2472cf5b7793f463577e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 00:58:58 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 00:58:58 2012 -0800" }, "message": "Merge changes I8c9958ad,I245935fa into msm-3.0\n\n* changes:\n msm: bam_dmux: use non-interruptable variants of wait_for_completion\n msm: bam_dmux: Add error checking for debugfs nodes\n" }, { "commit": "82b7e3fafcc8a6749e61b0854da79c93f6082faf", "tree": "d6a15b7e9c46925837d6ff39b47c91a0e1a11cbc", "parents": [ "36eaeddad9402758f44fbaf56ea8ffdc9ba28eea" ], "author": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Thu Jan 05 10:03:27 2012 -0800" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 23:52:54 2012 -0700" }, "message": "msm: 8064: Add machine records for cdp, mtp and liquid.\n\nAlso add Kconfig and defconfig configuration\nto enable them for the apq8064 device..\n\nChange-Id: Ia7d78a9e1c65f90002403becd90a25adb5da0119\nSigned-off-by: Joel King \u003cjoelking@codeaurora.org\u003e\n" }, { "commit": "a56f880f2bc20182c1ffa4ca25a9799fca93bc94", "tree": "90adde0e1435c4a1c5983e81a23fad90e4d26666", "parents": [ "600490f99eac207d6f77b3b50760ac0d7abfc990", "4a036e4ff9216524a3d5ed8f4f0f34ef06d2ec5e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 22:42:18 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 22:42:18 2012 -0800" }, "message": "Merge \"fmem: remove ASSERT_SPINLOCK macro\" into msm-3.0" }, { "commit": "600490f99eac207d6f77b3b50760ac0d7abfc990", "tree": "d01113b3dac95f34978840e12ced4fa44bb79a0e", "parents": [ "39cd52e9df9add585435fd950740c0a3636e9610", "efd780d21a66176b1acb7e5f0ad44847cb30e6ee" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 22:42:18 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 22:42:18 2012 -0800" }, "message": "Merge \"msm: qdsp6v2: Invalid memory access of timpani regset array\" into msm-3.0" }, { "commit": "39cd52e9df9add585435fd950740c0a3636e9610", "tree": "550432f43f095ac7dc1e50db516422d5ebec79af", "parents": [ "36eaeddad9402758f44fbaf56ea8ffdc9ba28eea", "2a9060429599c4ac9bdacf8a84e198cd28e6121e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 22:42:17 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 22:42:18 2012 -0800" }, "message": "Merge \"msm: board-msm7627a-bt: Allow BT SOC to be held in RESET\" into msm-3.0" } ], "next": "36eaeddad9402758f44fbaf56ea8ffdc9ba28eea" }