)]}' { "log": [ { "commit": "b52c7182bb304bec1e873d730ae5a9cfca33526d", "tree": "d724dd48caea5aac16363ac1fcada4d145f34713", "parents": [ "d0ed5ae04fc529f2f4477529c66f950f3ff791be" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Wed Nov 28 23:46:50 2012 +0200" }, "committer": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Wed Nov 28 23:46:50 2012 +0200" }, "message": "mmc: Revert all packing related patches\n\nThe version of packing support excepted by the linux community is\nslightly different from the one that was merged. This revert is needed\nin order to upload the latest version from the linux community.\n\nThis patch reverts the following commits:\n1.mmc: card: Add eMMC4.5 write packed commands unit-tests\n2.mmc: card: Fix packing control enabling algorithm\n3.mmc: block: Add MMC write packing statistics\n4.mmc: msm_sdcc: enable the write packing control\n5.mmc: msm_sdcc: Enable write packing capability\n6.mmc: block: Add write packing control\n7.mmc: core: Support packed write command for eMMC4.5 device\n8.mmc: core: Add packed command feature of eMMC4.5\n\n(cherry picked from commit f94cf3da103b344b13fa4d6665fd21dad1b95ead)\n\nChange-Id: I2efc6dc8d8f6d5cc7e9efa99ec74914ffff96fcd\n commit: 9b54d88c6a11ebfe069b7fdebcb521da21754c3f\n commit: e2ecb58a6c5011549aac3e86fb1c13e7b7c65104\n commit: e544d700e2dac1584a8172c4dc347d81ede203bd\n commit: 8afe8d2a98a1bbf3804162ff5c95a56226935f5a\n commit: 25e2261a556c4393f79d58bce814bb3df34b9549\n commit: 63c61d6d8b8f37c71b4162b3affffdf72ac06811\n commit: 968c774ea6466fa7adbf2eac333220132acda306\n commit: 516994eee39282b8648b509e449ff83b49833209.\nSigned-off-by: Tatyana Brokhman \u003ctlinder@codeaurora.org\u003e\n(cherry picked from commit 31fe84d6edae65f9df5663538e528697897be86e)\n\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n" }, { "commit": "d0ed5ae04fc529f2f4477529c66f950f3ff791be", "tree": "054743589bacd3ff9719d29075dad1f5d7fb8b1d", "parents": [ "32286c2218d0c1d609e11dcd9516c17e32b3bb2a" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Thu Nov 01 21:39:00 2012 +0200" }, "committer": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Wed Nov 28 23:28:30 2012 +0200" }, "message": "mmc: msm_sdcc: Enable eMMCv4.5 BKOPS support\n\nSet MMC_CAP2_INIT_BKOPS. This will set the BKOPS_EN bit in the\next_csd register. The BKOPS_EN bit is one time programmable.\n\n(cherry picked from commit b7f382b25fbd363c43af2332b4ff490e13aab6e4)\n\nChange-Id: Ie913561b2b82ff28366ffe564ffcafe8fc19a96a\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n(cherry picked from commit 2d29e0d34e3304d976291d3ab29c7c893c12d740)\n" }, { "commit": "32286c2218d0c1d609e11dcd9516c17e32b3bb2a", "tree": "d5fedbf22018e6d35aa8071ae6a1869c47c623a7", "parents": [ "b12ed0edfe45f02c7ca1694e7cdadf582830808c" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Sat Sep 29 06:30:47 2012 +0200" }, "committer": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Wed Nov 28 23:27:02 2012 +0200" }, "message": "mmc: core: Add the ability to enable BKOPS\n\nIf the card and the host support BKOPS, and BKOPS is not enabled\nyet, set the BKOPS_EN bit to enable BKOPS.\nThis bit is one time programmable.\n\n(cherry picked from commit e966c1ca32d118b26ca6e26267f0c13c9c0e0052)\n\nChange-Id: I2b97898857bed676021fe56a6f6e49762cf609fa\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n(cherry picked from commit 5ebe331e59e9c30bffead8e3030e3581ee699895)\n" }, { "commit": "b12ed0edfe45f02c7ca1694e7cdadf582830808c", "tree": "4432d51203f4ee0a42cd7a6eab55acf1960aa781", "parents": [ "e11cecb4f3b0f09849287910822cd48cd4f644f1" ], "author": { "name": "Jaehoon Chung", "email": "jh80.chung@samsung.com", "time": "Mon Sep 24 14:44:45 2012 +0200" }, "committer": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Wed Nov 28 23:25:24 2012 +0200" }, "message": "mmc: support BKOPS feature for eMMC\n\nEnable eMMC background operations (BKOPS) feature.\n\nIf URGENT_BKOPS is set after a response, note that BKOPS are required.\nImmediately run BKOPS if required. Read/write operations should be\nrequested during BKOPS(LEVEL-1), then issue HPI to interrupt the\nongoing BKOPS and service the foreground operation.\n(This patch only controls the LEVEL2/3.)\n\nWhen repeating the writing 1GB data, at a certain time, performance is\ndecreased. At that time, card triggers the Level-3 or Level-2. After\nrunning bkops, performance is recovered.\n\nFuture considerations:\n * Check BKOPS_LEVEL\u003d1 and start BKOPS in a preventive manner.\n * Interrupt ongoing BKOPS before powering off the card.\n * How do we get BKOPS_STATUS value (periodically send ext_csd command)?\n * If using periodic bkops, also consider runtime_pm control.\n\n(cherry picked from commit 6807769f7bf68984a5aeda4b9b521f1167cbaf00)\n\n[merez@codeaurora.org: core.c: release_host when stopping BKOPs for\nnon SDIO cards in suspend]\n(cherry picked from commit c1a56a1247341d13af7c8f84d5ac1211a3c4b376)\n\nChange-Id: I5ac2ac909222e2b4e94cd97ce7da79f4488f06f0\nSigned-off-by: Jaehoon Chung \u003cjh80.chung@samsung.com\u003e\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nSigned-off-by: Konstantin Dorfman \u003ckdorfman@codeaurora.org\u003e\nReviewed-by: Maya Erez \u003cmerez@codeaurora.org\u003e\nSigned-off-by: Chris Ball \u003ccjb@laptop.org\u003e\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n(cherry picked from commit 653abe2434532e4d2886d27dfdc3f42ae1c7ade1)\n" }, { "commit": "e11cecb4f3b0f09849287910822cd48cd4f644f1", "tree": "d44a67eef0dec0e79ebf322b6ae35c74d44cd0e9", "parents": [ "de4e64aa8db98d6fc73059225511668865ecab26" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Thu Sep 20 10:53:36 2012 +0300" }, "committer": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Wed Nov 28 23:22:45 2012 +0200" }, "message": "mmc: Revert BKOPs feature\n\nA newer version of BKOps should be picked from the community.\nTherefore the old support is reverted.\nRevert the following commits:\n9db69fca22bd2970f6b14b50cf8533a1edb64364\n8ac659eb3d96e31b8bb6b8d09143ddd6eb83ae19\nf886c80ee2f4c29aeaab2d76c9303c00263bb428\n\n(cherry picked from commit 3402d2b725a5af16bc62a2e788913a46d3f7e54a)\n\nChange-Id: I5df105753bef7ee10215526006187673b85bb0c1\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n(cherry picked from commit b5763af04035cd5e3264225f40270d175985adc5)\n" }, { "commit": "de4e64aa8db98d6fc73059225511668865ecab26", "tree": "1288c5f8f9f0134a07b4278cf7a8b439f11d71da", "parents": [ "d9ad07ee5a26dfe64c91ce04da67eff87f58c472" ], "author": { "name": "Sreenivasulu Chalam Charla", "email": "sreeniva@codeaurora.org", "time": "Tue Oct 09 08:28:18 2012 +0530" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:33 2012 -0800" }, "message": "Revert \"touchscreen: cyttsp-i2c-qc: Add low power mode functionality\"\n\nThis reverts commit 304d9f5172c8c0210e2e29b175e8f68ea8257f69.\nlow power mode changes are causing issues like,delay in reponse to\ntouch , and controller is not recognizing the touch events as its\nscan rate is also low in low power mode state . since controller is\nnot recognizing the touch in low power mode state , so only way\nfor the controller to come out of low power mode is to do multi-touch\nand controller responds randomly to one of the touches and comes out\nof the low power mode.\n\nSigned-off-by: Sreenivasulu Chalam Charla \u003csreeniva@codeaurora.org\u003e\n\nChange-Id: I35e0797f819cfbce6630d70af443b96546eacfb5\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "d9ad07ee5a26dfe64c91ce04da67eff87f58c472", "tree": "7dcbf727d3e31993a29eb7b35def97fddd83cb0a", "parents": [ "1255fe1abf5aea6be5a5044d6802bbc877617b29" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Sep 17 16:59:36 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:33 2012 -0800" }, "message": "power: pm8921-charger: fix EOC worker not starting\n\nThere are situations when we observe that charging is in progress\nbut the end of charge (EOC) worker is not running. This leads to\nproblems like\n-never detecting end of charge\n-not adjusting vddmax\n-not preventing suspend while charging.\n\nThe reason is that the bootloader could have started charging already,\ncausing a fastchg interrupt to not happen. If the fastchg interrupt is\nmissed the driver will never start EOC worker.\n\nCheck the real time status of the fastchg interrupt and if it is fast\ncharging invoke the handler so that the eoc worker could be\nstarted.\n\n(cherry picked from commit 7f1d97fd69c3afe66577e731105207e5db544ab2)\n\nCRs-Fixed: 393301\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n\nChange-Id: I5c0ba3b8f0653c5f9d64f35346601763c059505a\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "1255fe1abf5aea6be5a5044d6802bbc877617b29", "tree": "56a24d2d68de29508fdd32b817070cae831387d3", "parents": [ "5311108c387bc46baf429902ccfe42ba61670f4f" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Thu Oct 04 13:37:28 2012 -0600" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:32 2012 -0800" }, "message": "msm: smsm: Add processor AWAKE signaling\n\nThis processor-awake signaling can be used by remote processors to\ndetermine if the Apps processor is asleep and if so, if it wants to send\ndata to the Apps processor that would trigger a wakeup sequence.\n\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n\nChange-Id: Ifef10ead33297697c6cb1726bff21798a11caa97\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "5311108c387bc46baf429902ccfe42ba61670f4f", "tree": "b0dd834054c4e9584039bce9f03fa7c86ff9e78e", "parents": [ "2f08a5884157bf639561d3c753542a03d9f7c3c5" ], "author": { "name": "Pavankumar Kondeti", "email": "pkondeti@codeaurora.org", "time": "Tue Oct 09 17:47:44 2012 +0530" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:32 2012 -0800" }, "message": "USB: android: Don\u0027t disable configuration for every adb close\n\nCertain ADB commands like \"adb usb\" and \"adb root\" restart the\nadb daemon running on the device. These commands require USB\nbus reset, otherwise adb commands on the host side would stuck\nfor ever.\n\nUSB bus reset can be forced from device side by re-enabling the\nsame composition. Earlier, configuration is disabled when adb\ndaemon closes /dev/android_usb device file. The configuration\nis enabled again after adb daemon opens the device file. This\napproach solves the \"adb usb\" problem with the below side effects.\n\n1. When USB cable is disconnected, the Rx request is flushed and\nan error code is returned to user space. The adb daemon is simply\nrestarted in this case which cause an unnecessary rebinding of\nall functions.\n2. The above scenario can happen if host reset the bus when device\nis in configured state. If device disable pull-up during, bus\nreset, USB CV CH9 test cases are failing.\n\nThe commit d9b1897 (USB: android: Avoid re-enabling the same\nconfiguration) fixed the above side effects. But silently ignores the\noriginal \"adb usb\" problem.\n\nThis commit is another attempt to solve all the above mentioned problems\nby forcing re-enumeration only when device is in connected state. That\nmeans, \"adb usb\" and \"adb root\" commands force usb bus reset where as\nplugging out a cable does not.\n\n(cherry picked from commit 1aa235a6c0a3d67bff24609766baf5a7d5d8e3e4)\n\n(cherry picked from commit 81fefe664ab6333f05209bed959a599a47baf71f)\n\nChange-Id: Id3a40f62dd51aba6ec690d3326ed67ced32b946a\nCRs-Fixed: 407882\nSigned-off-by: Pavankumar Kondeti \u003cpkondeti@codeaurora.org\u003e\n\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "2f08a5884157bf639561d3c753542a03d9f7c3c5", "tree": "1b290d9c94d720ad3255680e4def85d2895babe1", "parents": [ "50d6b09b23dd64b2fff7915444b7e013bcdf0067" ], "author": { "name": "Girish Mahadevan", "email": "girishm@codeaurora.org", "time": "Mon Sep 10 12:43:26 2012 -0600" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:31 2012 -0800" }, "message": "msm: devices-8930: Change start address for RPM RBCPR stats\n\nModify the start address of RPM RBCPR stats in RPM MSG RAM to\nmatch the address being used by RBCPR driver on RPM. This change\nis needed to allow reading of RBCPR stats from RPM MSG RAM.\n\n(cherry picked from commit ea1a1d78c1617cc62af5f0ea3fe836d4d9b87191)\nSigned-off-by: Girish Mahadevan \u003cgirishm@codeaurora.org\u003e\n\nChange-Id: Id5d6b08dca4f56687fff506e676bfe12845acef9\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "50d6b09b23dd64b2fff7915444b7e013bcdf0067", "tree": "5c84cad8e1e0c639477856444a80aaf8b8403ddd", "parents": [ "7122a2f2d183a1d1ea516ddf74ca6cdb175841d2" ], "author": { "name": "Deepa Madiregama", "email": "dmadireg@codeaurora.org", "time": "Wed Oct 03 16:19:41 2012 +0530" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:31 2012 -0800" }, "message": "msm: audio: qdsp6v2: Fix the issue of memory unmap\n\n- Target freeze observed during monkey run.\n- Memory unmap getting called from interrupt context,\n which is causing scheduling during atomic operation.\n- Avoid calling memory unmap from interrupt context.\n\n(cherry picked from commit a64fae9ba272ba2f689f30bc7b33c8a1fe4445e5)\nSigned-off-by: Deepa Madiregama \u003cdmadireg@codeaurora.org\u003e\n\nChange-Id: Iab9372ba1b2d560c7e161f39483478f0342ac30a\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "7122a2f2d183a1d1ea516ddf74ca6cdb175841d2", "tree": "14b90e251d23aef3e91f41c55fb822f4f9f3a744", "parents": [ "a7b8f1fb341fb846a545ce1be1b0cc5e8658f089" ], "author": { "name": "Tianyi Gou", "email": "tgou@codeaurora.org", "time": "Wed Oct 03 18:31:28 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:30 2012 -0800" }, "message": "msm: acpuclock-8064: Lower VDD_DIG voltage vote for L2 at 384MHz\n\nNew characterization data shows that vdd_dig voltage for L2@384MHz\ncan be lowered to 0.95v. Update the data in this patch.\n\nSigned-off-by: Tianyi Gou \u003ctgou@codeaurora.org\u003e\n(cherry picked from commit 7a904ecd4f43f228cd1b3ea0d8ef4054b69cdb35)\n\nChange-Id: I7f38657930231ce8969bd16e793b57e606fcd162\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "a7b8f1fb341fb846a545ce1be1b0cc5e8658f089", "tree": "22f1167de81335d629ebaa92618803226292d749", "parents": [ "03a9915b427a4ac7a1af6f869c6993878e4c616e" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Fri Aug 24 13:07:24 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:30 2012 -0800" }, "message": "msm: clock-8960: Lower frequency requirements of fpb active votes\n\nWe have an active set vote for the multimedia fpb and chip fpb so\nthat the registers are accessible whenever the processor is\nawake. Unfortunately these requests are at the highest rate\nsupported which is not really necessary to ensure that the buses\nare clocking. Lower the rate requests to the fastest speed that\ndoesn\u0027t require increasing voltages to allow the chip to hit low\nvoltages when the processor is awake.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n(cherry picked from commit 9e497f042d8525e57e11d417e9e37c2932a18dbf)\n\nChange-Id: I3ee4926da0d953e7e31c3c64dffd11f6ee5edb72\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "03a9915b427a4ac7a1af6f869c6993878e4c616e", "tree": "21154689186f518a7954236845f707ee2e5dacdd", "parents": [ "ed173f695413d124eeaeb6e37605dd68f13de49c" ], "author": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Wed Oct 03 13:14:06 2012 +0530" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:29 2012 -0800" }, "message": "USB: ci13xxx_udc: Fix ENDPOINT PRIME failure issue\n\nwhile queueing requests to USB HW, waiting till EP PRIME bit\nget cleared after setting it leads to wathdog timeout. Fix\nthis by implementing timer based solution instead of infinite\nPRIME check loop.\n(cherry picked from commit 9e4a5053b0f25cb18ed394fa517be620db673d44)\n(cherry picked from commit dcfe03cd167f1b4916de85ce0a0a5516191741cc)\nCRs-Fixed: 397907\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\n\nChange-Id: Iad7504c77c02870d9fa3b7b9decf13afcf2c9e12\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "ed173f695413d124eeaeb6e37605dd68f13de49c", "tree": "371613d8eab629d50f9f39f95144ab5d9d47d3a1", "parents": [ "b16c0bdea5cf69229a559e229e4c62b75cc73051" ], "author": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Wed Oct 03 17:15:28 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:28 2012 -0800" }, "message": "usb: mdm_bridge: Increase the number of rx urbs\n\nDue to higher HSIC interrupt threshold value, sometimes\ndriver is running short of enough rx urbs queued to HSIC\nHW to receive IP packets from mdm device. In this case\ndriver is busy processing large number of completed rx\nurbs and left with fewer pending urbs with HW. This causes\noccasional throughput drops on rx data path. Hence increase\nnumber of rx urb from 50 to 100, to keep HSIC HW busy in\npulling data from mdm device while completed urbs are getting\nprocessed.\n\n(cherry picked from commit e8f691f60db39b50951148c3e68ae35c89cdd397)\nCRs-Fixed: 397809\nSigned-off-by: Hemant Kumar \u003chemantk@codeaurora.org\u003e\n\nChange-Id: I590c203551c5ac83a71b8628d195f2a15840edf1\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "b16c0bdea5cf69229a559e229e4c62b75cc73051", "tree": "7191e98e0582a2a585d6d8427d9c8e8b8d25f214", "parents": [ "2d43cd521a7e92bf6955e827d2ccbe743799411a" ], "author": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Thu Oct 04 16:57:52 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:28 2012 -0800" }, "message": "ASoC: wcd9310: Resend edge triggered GPIO IRQ\n\nIf MBHC GPIO IRQ for mechanical headset detection asserted while power\nmanagement\u0027s suspend call chain is being called, wcd9xxx_lock_sleep will\nfail to wait for system\u0027s resume since power management interface has\nto finish suspend in order to resume system.\nIn this case, interrupt cannot be handled as codec driver cannot\nguarantee if underlying bus is awake.\nWake up system and resend the IRQ for this situation.\n\n(cherry picked from commit ecf379cd17b7fe94e6f0df0598a472b6f1828ad5)\n(cherry picked from commit bdda99b93915d217150f5484f9c718c905703f1e)\nCRs-fixed: 404167\nSigned-off-by: Joonwoo Park \u003cjoonwoop@codeaurora.org\u003e\n\nChange-Id: Id5970b359b80e0cd1f701b30c61ade23e0f67b9e\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "2d43cd521a7e92bf6955e827d2ccbe743799411a", "tree": "5a19155fefe843ef69dfa6c1cab43132bc86fb25", "parents": [ "3ec03e3e5df77ed3c237060e7f383f79fd6e8108" ], "author": { "name": "Ming-yi Lin", "email": "mylin@codeaurora.org", "time": "Wed Oct 17 11:50:15 2012 +0800" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:27 2012 -0800" }, "message": "msm: 8960: add ath6kl_wlan_power function to control AR6004 gpio\n\nAdd necessary functions for AR6004 to control BT related GPIO.\nThis change will only be used by AR6004\n\n(cherry picked from commit 9baad179a8a7996e1912de14eb6f02f17c932e03)\n(cherry picked from commit 493557fce821ae201b4cc3c6a125d703ac5de60e)\nSigned-off-by: Ming-yi Lin \u003cmylin@codeaurora.org\u003e\n\nChange-Id: I0fb3a59761dc3e994254bdc0241281e4bbcdf402\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "3ec03e3e5df77ed3c237060e7f383f79fd6e8108", "tree": "6d14775cb1476aebbe92ab53e8844499d0a7e5a0", "parents": [ "0fe15c4b9abd2c6cdbb2e9612df01d5160ee5c46" ], "author": { "name": "Sameer Thalappil", "email": "sameert@codeaurora.org", "time": "Thu Oct 04 17:22:24 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:27 2012 -0800" }, "message": "wcnss: Rename riva to wcnss in SSR framework\n\nSMD or any client for WCNSS SSR notification can use the same name\n(wcnss) for both Pronto and Riva.\n\nSigned-off-by: Sameer Thalappil \u003csameert@codeaurora.org\u003e\n\nChange-Id: I956d9623f99855402add40b3e999bfacace7d2f3\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "0fe15c4b9abd2c6cdbb2e9612df01d5160ee5c46", "tree": "5a1fc0e92f4c171e4e5306970eb64a008f7ebb3a", "parents": [ "515395dfdea14e878782430057b8b2c0a9034e18" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Tue Sep 04 09:33:28 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:26 2012 -0800" }, "message": "power: pm8921-charger: Control CHG_USB_SUSPEND enabling boost\n\nToggle the CHG_USB_SUSPEND bit when utilizing the VBUS boost.\nThis bit controls ensures that no current is being drawn from\na USB device and the charger runs off the battery.\n\nThis makes sure that when pm8921_disable_source_current is called\nthe correct setting is written to the suspend bit depending\non the disable flag.\n\n(cherry picked from commit d8878596b9b19668fd1f1b226a333d955f2218c4)\nCRs-Fixed: 393498\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n\nChange-Id: Iae390fd10e59d6ba1fe85743c1015eea35b06f7a\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "515395dfdea14e878782430057b8b2c0a9034e18", "tree": "d56d101f1deb5b5f069f08c5ff89477958b7854e", "parents": [ "b91ab718995c9326e0e66848ed88aa2d4a4462b5" ], "author": { "name": "Jay Wang", "email": "jaywang@codeaurora.org", "time": "Tue Oct 16 13:32:21 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:26 2012 -0800" }, "message": "msm: board-8930: Reduce the PMEM size for audio\n\n(cherry picked from commit 19a992314983c132d97b0d670b40e535580955da)\n\nSigned-off-by: Jay Wang \u003cjaywang@codeaurora.org\u003e\n\nChange-Id: I16af92f174ac8a9b9ac15e96cbf2b89db4de1df5\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "b91ab718995c9326e0e66848ed88aa2d4a4462b5", "tree": "bf7c3b03f99c0b8bbdbca40f933acea0eae06470", "parents": [ "47e6c1485df6b532df619b5d2f5df31bacaa1afe" ], "author": { "name": "Pavankumar Kondeti", "email": "pkondeti@codeaurora.org", "time": "Mon Oct 22 13:21:19 2012 +0530" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:25 2012 -0800" }, "message": "USB: msm_otg: Abort suspend while host mode is activated\n\nID ground interrupt processing and system suspend can run in parallel.\nWhen Id is grounded, USB is brought out of low power mode(LPM) and state\nmachine work is run to activate host mode. While waiting for the VBUS\nvalid event, device suspend callback is executed from system suspend\ncontext. The current code put USB in LPM, without activating host mode\ncompletely. Abort suspend when A_BUS_REQ is asserted which indicate\nthat host mode is active.\n\n(cherry picked from commit cfe0539e389c52ec6c4d99cf1915d806d42f1abe)\n\nCRs-Fixed: 412841\nSigned-off-by: Pavankumar Kondeti \u003cpkondeti@codeaurora.org\u003e\n\nChange-Id: I9ecd4f55a328d63ddbf0e415a9bcff1158874203\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "47e6c1485df6b532df619b5d2f5df31bacaa1afe", "tree": "be94ef299dc540097730331199a80f77da31ca20", "parents": [ "7846731ec0e839d9c62ddb45114093a9256a3d0d" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Wed Sep 19 16:11:06 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:25 2012 -0800" }, "message": "msm: 8930-gpiomux: Reduce drive strength for CDC_MCLK\n\n8MA drive strength is causing GSM DCS/PCS RX band desensitization.\nHence, the GSM subsystem needs the drive strength to be 2MA for this gpio.\n\n(cherry picked from commit 7a026522ee2d2436de37b43051a6530a39b8421a)\nCRs-Fixed: 401569\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n\nChange-Id: I4c39e3c62b6eb9faa8d227d3e146b1189109ec9c\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "7846731ec0e839d9c62ddb45114093a9256a3d0d", "tree": "e3dbccb3af288ec4c0de99ec038a85144dd7dc50", "parents": [ "d8110ebfa9520ed18d13f79b1d34efaf1a7280bd" ], "author": { "name": "Saket Saurabh", "email": "ssaurabh@codeaurora.org", "time": "Tue Oct 16 15:41:02 2012 +0530" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:24 2012 -0800" }, "message": "msm_serial_hs_hwreg.h: Correcting the even parity and odd parity bits\n\nCurrently parity bits are defined to be used with UART_DM_MR2\nregister with PARITY_MODE Bit as below :\nEVEN_PARTIY \u003d 1 and ODD_PARITY \u003d 2\nWith these values, UART functionality doesn\u0027t work after enabling parity.\nHence adding correct used PARITY_MODE bits value as\nEVEN_PARITY \u003d 2 and ODD_PARITY \u003d 1\nafter confirming with UART hardware programming guide.\n\nCRs-Fixed: 410377\nSigned-off-by: Saket Saurabh \u003cssaurabh@codeaurora.org\u003e\n(cherry picked from commit fd40e5f6313fbc74e8897927be1004faa5d9df08)\n\nChange-Id: I56f1a46ab56a7976ad00fc1329ad766b1182cb4e\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "d8110ebfa9520ed18d13f79b1d34efaf1a7280bd", "tree": "7952dd626326d9cb635ed3fcbec4a693682cc31d", "parents": [ "802fcbbb5be27070f086cc3a9b75ebc3c9f185f7" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Mon Oct 29 17:54:55 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:24 2012 -0800" }, "message": "msm: board-8930: Remove HDMI clocks from MDP GDHS data\n\nMSM8930 with PMIC8917 does not support HDMI. This change\nensures that HDMI clock domains are not set/reset as part of the\nMDP GDHS sequence for this particular configuration.\n\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n(cherry picked from commit 66fae64b1d7f66541b75675fe2c24c69e1bd87cf)\n\nChange-Id: Ie7ea77abf97b0857a72e32af6dbdb118038df620\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "802fcbbb5be27070f086cc3a9b75ebc3c9f185f7", "tree": "a65f143623a457434f450217895c87aef7e4706b", "parents": [ "2a8bd31eadf244fcbfedb793d9561cb5c157c494" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Tue Jul 17 15:27:30 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:23 2012 -0800" }, "message": "ASoC: WCD9304: Fix pop level during start of recording\n\nWhen recording is started, it is observed that the pop level is\nmuch higher than expected. Fix this issue by enabling the High\nPass Filter on microphone path with a cut off frequency of 150Hz\nwhen recording starts and reprogram the cut off frequency back\nafter a timeout of 300 millisecond.\n\nCRs-fixed: 380966\n(cherry picked from commit f9ed163835d1634a86cabc233d85bfe857f0eacf)\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n\nChange-Id: If98dfaf0f9b8f14c306f2d6a59154a615752823b\n\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "2a8bd31eadf244fcbfedb793d9561cb5c157c494", "tree": "504d8e3f6c61d0478fbe89d721275c553a02bed8", "parents": [ "36a7563e8eb9fa8cfbc5f7c24a3c73bc87fe201a" ], "author": { "name": "Anji Jonnala", "email": "anjir@codeaurora.org", "time": "Thu Nov 01 13:11:42 2012 +0530" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:23 2012 -0800" }, "message": "msm: rpm_stats: Add support to read master PC stats from RPM MSG RAM.\n\nRPM maintains PC stats for each master in MSG RAM and it allocates\n256 bytes for this use. No of masters differs for different targets.\n\nInitialize the resources for rpm_master_stat platform device.\n\nSigned-off-by: Anji Jonnala \u003canjir@codeaurora.org\u003e\n\nChange-Id: I0a44b083fd01a852ba214ecf1d2e6d953c154ed5\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "36a7563e8eb9fa8cfbc5f7c24a3c73bc87fe201a", "tree": "c7482095ae00b17f2bd3eb3689ad4cc5169b1686", "parents": [ "b7dd61535185415d141f6413f415f447df7fff7a" ], "author": { "name": "Anji Jonnala", "email": "anjir@codeaurora.org", "time": "Thu Nov 01 13:17:57 2012 +0530" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:22 2012 -0800" }, "message": "msm: rpm_stats: Debugfs support to display master PC stats.\n\nrpm maintains stats on power collapses and the list of active cores\nfor each master in its msg ram. Provide support to display it\nthrough debugfs.\nex:-\n\tmount -t debugfs none /data/debug\n\tcd /data/debug\n\tcat rpm_master_stats\nThe above commands will display no of power collapses and active cores\nfor each master. Sample output on 8960 is below\n\n\tKPSS\n\t\tnum_shutdowns:0\n\t\tactive_cores:7\n\t\t\tcore0\n\t\t\tcore1\n\t\t\tcore2\n\tMPSS\n\t\tnumshutdowns:10\n\t\tactivecores:0\n\tLPASS\n\t\tnumshutdowns:20\n\t\tactivecores:1\n\t\t\tcore0\n\tRIVA\n\t\tnumshutdowns:9\n\t\tactivecores:0\n\tDSPS\n\t\tnumshutdowns:90\n\t\tactivecores:0\n\nL2 cache also consider as another core in the stats.\n\nSigned-off-by: Anji Jonnala \u003canjir@codeaurora.org\u003e\n\nChange-Id: I570335c11f744663819ab040705fe715183bda8a\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "b7dd61535185415d141f6413f415f447df7fff7a", "tree": "b1925a1f39c7d6351c3818ff8abe3e726e0cbdf9", "parents": [ "9414bbe21743a5b94c51f3f6bca93de79baaa6d6" ], "author": { "name": "Banajit Goswami", "email": "bgoswa@codeaurora.org", "time": "Wed Oct 24 15:57:26 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:22 2012 -0800" }, "message": "ASoC: pcm: allow backend hardware to be freed in pause state\n\nWhen front-end PCM session is in paused state, back-end PCM\nsession will be put in paused state as well if given front-end\nPCM session is the only client of the given back-end. Then,\neven though the application closes front-end PCM session, DPCM\nframework will not allow back-end to enter into HW_FREE state,\nand hence back-end will never get shutdown completely.\n\n(cherry picked from commit 6479fa2d82c5fa8b756a4755bc84e2ce48dad850)\nCRs-fixed: 411089\nCRs-fixed: 409894\nSigned-off-by: Banajit Goswami \u003cbgoswa@codeaurora.org\u003e\n\nChange-Id: I4d4f856a0401ff96cef98d374c1d12b10e124528\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "9414bbe21743a5b94c51f3f6bca93de79baaa6d6", "tree": "194d5c057a5989eb9ba0106de03ffe998531ae69", "parents": [ "4137538491c5b566130df3d1c5003980b2fe80c5" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Thu Oct 25 15:04:37 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:21 2012 -0800" }, "message": "msm: sysmon: Handle races between probe/removal and API calls.\n\nIt is possible that clients of the sysmon may call its APIs\nbefore the associated device has probed, after it has been\nremoved, or while it is in the process of being added or\nremoved. Handle these scenarios and return -ENODEV when\nexternal APIs are called at illegal times.\n\n(cherry picked from commit 9319017b803cca3fd479e589db3d8d3560e19511)\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n\nChange-Id: Idb7bfd410957efe63ab4917d9481922de25287c4\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "4137538491c5b566130df3d1c5003980b2fe80c5", "tree": "bc80d107a4fe5bf4b3ce2911975bf70a713561a9", "parents": [ "3cdb860688f59b66750a7a7f9b877262f7ed0b45" ], "author": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Wed Sep 26 13:43:40 2012 +0530" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:20 2012 -0800" }, "message": "input: pm8xxx-pwrkey: Update key press status during probe\n\nPower key could be in pressed state during boot. Set the flag\nto track the press status properly by reading press irq status.\n\n(cherry picked from commit bd38250554df6e70657e6ff42ad63415dbd53f1a)\nCRs-fixed: 404018\nSigned-off-by: Mohan Pallaka \u003cmpallaka@codeaurora.org\u003e\n\nChange-Id: I1b604b63e53803483d3cc2a7bae0a5e7ed98285b\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "3cdb860688f59b66750a7a7f9b877262f7ed0b45", "tree": "430ee094ae3fbb89a7a967c6fee5ea71ba7c9706", "parents": [ "7733de1d9aa31e7a721fe4d91443a76f6ac597ab" ], "author": { "name": "Girish Mahadevan", "email": "girishm@codeaurora.org", "time": "Mon Sep 10 15:30:36 2012 -0600" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:20 2012 -0800" }, "message": "msm: event_timer: Support to add event timers.\n\nAdd support to allow drivers to specify future events\nthat need to be treated as hard deadlines. Upon event timer\nexpiry the driver will be notified by callback function\nthat the driver provides.\nThe pm code can query the earliest event and modify\nthe event timer accounting for the back off based on the\nlatency of the low power mode being entered.\n\n(cherry picked from commit 388c308cebef8e9cdbd80608a032abc810d46e62)\nSigned-off-by: Girish Mahadevan \u003cgirishm@codeaurora.org\u003e\n\nChange-Id: I461e2c31c285b93588aa56dd25905efab020e0c8\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "7733de1d9aa31e7a721fe4d91443a76f6ac597ab", "tree": "78d4abcadd3fb49cac4b4341b509b84dda6aedc7", "parents": [ "12aaabebaee491af064c239987f355d322d77b8a" ], "author": { "name": "Girish Mahadevan", "email": "girishm@codeaurora.org", "time": "Mon Sep 10 15:46:14 2012 -0600" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:19 2012 -0800" }, "message": "msm: defconfig: Enable event timer\n\nEnable Event timer feature. This feature enables PM\ncode to monitor events that require the core to be ready\nto handle the event.\n\n(cherry picked from commit 19d00d50f5b09a25712133ed0b329cc9c5c3d1d8)\nSigned-off-by: Girish Mahadevan \u003cgirishm@codeaurora.org\u003e\n\nChange-Id: Ib56e49edd00bea35ab7395bb038a627f43187f57\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "12aaabebaee491af064c239987f355d322d77b8a", "tree": "ab71fd8ecd0abbae7f3de1eb3038c9f050bbeb9c", "parents": [ "c8944c06aee34dd4d387ed36725067f877a5943f" ], "author": { "name": "Girish Mahadevan", "email": "girishm@codeaurora.org", "time": "Fri Aug 17 16:48:05 2012 -0600" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:19 2012 -0800" }, "message": "msm: pm: Adjust for events with hard wakeups\n\nGet the next event and setup a new timer to expire\nearlier than the next event after accounting for the\nlatency of the low power state being entered. This\nwill ensure that the core is active to handle the event\nwhen it arrives.\n\n(cherry picked from commit dc318fd0c3d04f7af9720af50c0eb0c6ed2653e9)\nSigned-off-by: Girish Mahadevan \u003cgirishm@codeaurora.org\u003e\n\nChange-Id: I6609a886df227c68ce78e270ef7d235e07725d44\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "c8944c06aee34dd4d387ed36725067f877a5943f", "tree": "10cecac48e5c43162f2d39864dde3928caaf0c8d", "parents": [ "6b4de78b4918a2ba8fd68ad96207b0b7810ffcfe" ], "author": { "name": "Nagender Telkar", "email": "ntelkar@codeaurora.org", "time": "Fri Sep 14 19:16:18 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:18 2012 -0800" }, "message": "build: strip debug symbols from installed kernel modules\n\nDebug symbols in installed kernel modules consume space\nin the target filesystem, so strip them. Modules with\ndebug symbols should be present in the KERNEL_OBJ\nlocation for debug purposes. \n\n(cherry picked from commit bb77a75767f5dbb7327ab05f4ec4462b6ad62b10)\nCRs-fixed: 400053\nSigned-off-by: Nagender Telkar \u003cntelkar@codeaurora.org\u003e\n\nChange-Id: I4353e3733455e01cbe97c023d36b9bd3b7b8adf2\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "6b4de78b4918a2ba8fd68ad96207b0b7810ffcfe", "tree": "22c4e54cf85c776b87f973bda929451d9a4bb521", "parents": [ "19211b9dfe39f4363456a25928a129cb4f42930c" ], "author": { "name": "Jayasena Sangaraboina", "email": "jsanga@codeaurora.org", "time": "Tue Oct 23 16:52:01 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:18 2012 -0800" }, "message": "ASoc: msm8930: Add fix for Unsupported Proxy backend sample rates\n\n- AFE does not support sampling rate 44.1k\n- This fix addresses the issue by setting backend proxy device\nsampling rate to 48k\n\n(cherry picked from commit 69ab7356a72981032d5d403ec1508dcfaeb7075f)\nCRs-fixed: 413871\nSigned-off-by: Jayasena Sangaraboina \u003cjsanga@codeaurora.org\u003e\n\nChange-Id: Ic067178f9d4cdb51b8fee5292b960922088c8539\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "19211b9dfe39f4363456a25928a129cb4f42930c", "tree": "6cf85387a7d6f013a93c1d1e2dae06827554e0ed", "parents": [ "42de241df9046ca1e9c17543eb1285f4e86ddf4e" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Fri Oct 19 18:24:49 2012 -0600" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:17 2012 -0800" }, "message": "rmnet_smux: Wake netif queue after low-watermark notification\n\nCurrently, RMNET will restart the TX queue after receiving a\nlow-watermark notification from SMUX. This just clears the XOFF bit,\nbut does not reschedule the TX thread in the Linux TCP/IP stack. This\nmeans that the next TX operation will not take place until the thread is\nscheduled by some other means which may take up to 5 seconds.\n\nInstead, wake the queue which clears the XOFF bit and schedules the TX\nthread to allow transmission to continue immediately.\n\n(cherry picked from commit 4d8fb2ecb3a9cdab3e9d605280256c6b46773dd0)\nCRs-Fixed: 412758\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n\nChange-Id: I1f169547f3ff518baada632d5a3f766b5795c697\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "42de241df9046ca1e9c17543eb1285f4e86ddf4e", "tree": "49dff2849abc0164f98c078d26dd2312a0586aa5", "parents": [ "729f8bf2d3464efec40b7d68d9db76c7219efa28" ], "author": { "name": "Mohan Kumar Gubbihalli Lachma Naik", "email": "mgubbi@codeaurora.org", "time": "Fri Oct 26 17:55:27 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:17 2012 -0800" }, "message": "msm: vidc: Set dpb count for smooth streaming\n\nThe min_dpb required for smooth streaming is set for the\nmax requirement of 1080p playback session. This is set in\nvidc platform data in the device file.\n\n(cherry picked from commit 885fcc57354cd309f5ed0356da486d1e130b9ad7)\nCRs-fixed: 408738\nSigned-off-by: Mohan Kumar Gubbihalli Lachma Naik \u003cmgubbi@codeaurora.org\u003e\n\nChange-Id: I38c3c9931f573cb029871bd48fd161f2158e139e\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "729f8bf2d3464efec40b7d68d9db76c7219efa28", "tree": "90a03b1a4184345cd55b6629d2ee12870beade8d", "parents": [ "be4e313905d9a76dfa299958a228733a45895cc9" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Tue Oct 09 12:34:44 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:16 2012 -0800" }, "message": "ASoC: WCD9304: Wait for earpiece PA to settle down\n\nDuring playback of audio on earpiece path, the PA on the path\nis the last component to be turned on. The turn on of PA can\ncause a glitch in the output signal because the level of the PA\nis not yet settled. Waiting for 20 msec after turning on the PA\navoids this glitch.\n\nCRs-fixed: 417031\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n(cherry picked from commit 1fa994d4aa256a536523f116232c4822b3495400)\n\nChange-Id: Iaa7a47526c71d8b037df3d09cf30ede296c21356\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "be4e313905d9a76dfa299958a228733a45895cc9", "tree": "68fb713edc43ce7eb20c70f520b99cb9a31cad16", "parents": [ "2226d263ff3f0dcd49e2f85d97e703d19044cc4c" ], "author": { "name": "Pratibhasagar V", "email": "pratibha@codeaurora.org", "time": "Thu Sep 20 19:46:11 2012 +0530" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:16 2012 -0800" }, "message": "mmc: msm_sdcc: Reset interrupt MASK register (MCI_MASK0) on powering off\n\nIn one corner case, the SD card is stuck in a bad state with its DAT0\nline pulled low, and SDCC is waiting on the interrupt when the line\ngoes back high. But due its bad state eventually the SD card is removed\nfrom the system.\n\nLater during re-scanning of the devices, the SD card is power-cycled and\nadded to the system. But now the pending interrupts for SD card is\nreceived as the interrupt MASK register (MCI_MASK0) was not cleared.\n\nTo prevent such cases reset the interrupt MASK register (MCI_MASK0) while\npowering off to prevent any pending interrupts after power-cycle.\n(cherry picked from commit a3f8f793b21782c79a9fcc5f7aa1cc27fcbf246e)\nCRs-Fixed: 396706\nSigned-off-by: Pratibhasagar V \u003cpratibha@codeaurora.org\u003e\n\nChange-Id: Idfae18895abf47769328b0a768f83eba2ef573f7\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "2226d263ff3f0dcd49e2f85d97e703d19044cc4c", "tree": "00437c0144dd176f6b0630012638efaaef5ec9a3", "parents": [ "1454bc830613871a47e67cab10c14af80c2d4e61" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Tue Oct 09 20:01:56 2012 +0530" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:15 2012 -0800" }, "message": "mmc: msm_sdcc: set DDR timing mode before setting the clock rate\n\nSetting DDR timing mode in controller before setting the clock\nrate will make sure that card don\u0027t see the double clock rate\neven for very small amount duration. Some eMMC cards seems to lock\nup if they see clock frequency \u003e 52MHz.\n(cherry picked from commit 2877d919135791d5223a9ba94b2cfc9ba50bc3df)\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n\nChange-Id: I7a4ace461e2def6d53863db4b768ec7e497b3095\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "1454bc830613871a47e67cab10c14af80c2d4e61", "tree": "35ce1aaa8425a744b8cdf78a70bf7ed2edd134af", "parents": [ "ebbf212d7b08f7b8de515c294fdb288f07d02fd9" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Mon Oct 01 11:12:59 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:15 2012 -0800" }, "message": "power: pm8921-charger: Fix bug in current limit lookup\n\nIn the usb_ma_table there exist two consecutive values\nthat have IUSB_FINE_RES bit set. Some functions\nincorrectly assume that this does not happen.\n\nFix this by checking for consecutive values having\nIUSB_FINE_IRES bit set.\n(cherry picked from commit 67ebde08e12d246302d133b4510d59c8f96325d1)\nCRs-Fixed: 404348\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n\nChange-Id: I6b6ca96b92ec4b9765e4812352057a0ac8cff380\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "ebbf212d7b08f7b8de515c294fdb288f07d02fd9", "tree": "dd11ef986a09a3540bae1af50458d1e6a9953543", "parents": [ "50cf2fc014fa5800db6edc2c9c5c5925638c206d" ], "author": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Sat Sep 29 22:27:03 2012 -0600" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:14 2012 -0800" }, "message": "msm: spm: Add msm_spm_get_vdd API\n\nAdd msm_spm_get_vdd() API to return the core active voltage\n\nSigned-off-by: Praveen Chidambaram \u003cpchidamb@codeaurora.org\u003e\n(cherry picked from commit 4133ba1e1c9384910cd6db56130b654af115651d)\n\nChange-Id: I76bcfbcb0eefda09757e9db86ba4adb76a44f2f7\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "50cf2fc014fa5800db6edc2c9c5c5925638c206d", "tree": "62c63c35f7777735e244d8f58a7fe46b4b87d4e2", "parents": [ "c114507cd208588d4d560d3286a086ea13133614" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Tue Sep 18 19:11:59 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:14 2012 -0800" }, "message": "msm: krait-l2-accessors: Remove workaround for 8064 Krait errata\n\nThis workaround can be removed in favor of an alternate solution\nimplemented in the power-collapse path which backs up the\ncorruptable L2CPUCPMR and L2CPMR registers before L2 power-collase\nand restores them afterwards.\n\nCRs-Fixed: 400700\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n(cherry picked from commit aa48fc35e051363b997bd33928796e3e84d08d88)\n\nSigned-off-by: Ram Kumar Chakravarthy Chebathini \u003crcheba@codeaurora.org\u003e\n\nChange-Id: I4a9962d95a4a7a835042dde91eee6b89754ea86b\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "c114507cd208588d4d560d3286a086ea13133614", "tree": "385b852f92f5885b223503aeec7c8c1ae5da4e6c", "parents": [ "03675a162119c39be91f1daf75d78a954bb12a1b" ], "author": { "name": "Mahesh Sivasubramanian", "email": "msivasub@codeaurora.org", "time": "Wed Oct 24 13:53:48 2012 -0600" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:13 2012 -0800" }, "message": "msm: avs: Add API to restore the AVSCSR register\n\nDuring power collapse, the AVSCSR register is always enabled and never\nrestored. This could result in AVS getting enabled on resume, when the\ncore is running at a frequency that doesn\u0027t support AVS.\n\nAdd new API, avs_enable, which restores the AVSCSR register based on the\nsaved AVSCSR register. Update the avs_disable API, to return the\nAVSCSR register value prior to disabling the AVS.\n\n(cherry picked from commit ad138da17fe08d46412d56b84309c5d17f7d5931)\n\nSigned-off-by: Mahesh Sivasubramanian \u003cmsivasub@codeaurora.org\u003e\n\nChange-Id: I2bd2e1d6aea058e0f44c474da6c3121654f1236e\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "03675a162119c39be91f1daf75d78a954bb12a1b", "tree": "6a800c4581ba9e75db0b22429009a5c2ee46bb93", "parents": [ "395a90f0bc84ab77b3a8879830fbbe67c6870760" ], "author": { "name": "Mona Hossain", "email": "mhossain@codeaurora.org", "time": "Wed Nov 07 11:52:44 2012 -0800" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:13 2012 -0800" }, "message": "crypto: Add wait states for hash/hmac operations\n\nCurrently, hash (SHA1/256/hmac) operation occasionally results\nin an incorrect hash value. This is due to the premature reading\nof the AUTH_IV register done before the last SHA block is processed.\nThere needs to be enough delay (wait states) before the AUTH_IV\nregister is read to extract the hash value.\n\nThe current implementation has 2 wait states. Adding 2 more wait states\nfor hash operations, resolves the issue.\n\nThe wait states are calculated based on the inputs from the hardware\nteam with regards to the time taken to process the last block of 16\nbytes of the data packet.\n\nSigned-off-by: Mona Hossain \u003cmhossain@codeaurora.org\u003e\n\nChange-Id: I82936441429560e41f25a98994d49a0113eb8de2\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "395a90f0bc84ab77b3a8879830fbbe67c6870760", "tree": "219ccc566efbc4590c4894a50dbcaf49a237b0e6", "parents": [ "988e443ad52c5e318848a80a14cba1485d0be0ec" ], "author": { "name": "Swaminathan Sathappan", "email": "Swami@codeaurora.org", "time": "Thu Oct 11 19:51:25 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:12 2012 -0800" }, "message": "msm: audio: qdsp6v2: Set end of frame flag to avoid aac multiseek issue\n\n- During aac playback, multiple seek lead to target freeze.\n- DSP starts decoding when internal buffer size maximum is\n reached, hence, if there are corrupted frames in that buffer,\n the entire set will not be decoded. This results in target freeze.\n- Fix is to set the end of frame flag in the buffers that\n are sent to DSP for decoding.\n\n(cherry picked from commit 08508ac42fed7b1e3a7a9b7e098dfb4ceff8b836)\n\nSigned-off-by: Swaminathan Sathappan \u003cSwami@codeaurora.org\u003e\n\nChange-Id: Ic34272222dcb1df42d7e2fe5d028d513b8cf452f\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "988e443ad52c5e318848a80a14cba1485d0be0ec", "tree": "84cbacca88af9ff7723c3bfb561f60428d08e209", "parents": [ "72abe0d7b7935d308f8e79e8975f24996dcc3522" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Oct 10 23:36:20 2012 -0700" }, "committer": { "name": "Neha Pandey", "email": "nehap@codeaurora.org", "time": "Mon Nov 26 16:13:12 2012 -0800" }, "message": "msm: clock-local: Add PXO rates for LPASS clocks on 8660, 8960, 8930, 8064\n\nLPASS clock are enabled out of reset on these SoCs, with PXO selected\nas their undivided source. Because PXO rates are not present in the\nfrequency tables however, these clocks fail to handoff with reason\n\u0027HANDOFF_UNKNOWN_RATE\u0027. As a result, clock_late_init() does not attempt\nto disable these clocks in lateinit.\n\nAdd PXO rates to the LPASS frequency tables so that handoff succeeds\nand, in lateinit, disables them if they are not used.\n\n(cherry picked from commit ac15a37fd85089a2aef16624140a5d0a6cd1d71b)\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n\nChange-Id: Id8d674bfa3d41316be8aa14c5cc84baa77078d23\n\nSigned-off-by: Neha Pandey \u003cnehap@codeaurora.org\u003e\n" }, { "commit": "72abe0d7b7935d308f8e79e8975f24996dcc3522", "tree": "8b51f78e6697bd0a0eb0459007688590c122337b", "parents": [ "ee15930302a39f6e5b1036d98eb0edfe30e984e2", "d6556676aeefa9b4a89455ca4fca3cc86e97c3ed" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:49 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:49 2012 -0800" }, "message": "Merge \"msm_fb: HDMI: Turn on HDMI core only for supported resolution\" into jb_2.5" }, { "commit": "ee15930302a39f6e5b1036d98eb0edfe30e984e2", "tree": "2eafa0be5f759ef1b73dc170aeaa2272f2aa39e1", "parents": [ "27bf971ed837118a6ab9b4f0dd54571bc6800979", "1252b438fa0c58584012f5bbf05141b59a36d029" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:47 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:47 2012 -0800" }, "message": "Merge \"msm_fb: HDMI: Cleanup of HDMI switch device notifications\" into jb_2.5" }, { "commit": "27bf971ed837118a6ab9b4f0dd54571bc6800979", "tree": "1de892224687ae0b1c84338fdefff9a1e9cb6e38", "parents": [ "236845d1ff50ace3b9fced82451a828b1087214c", "cf44e5f654639430fb9536c2b5335f696fabd44f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:46 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:46 2012 -0800" }, "message": "Merge \"msm_fb: HDMI: Add support for HDMI audio switch device node\" into jb_2.5" }, { "commit": "236845d1ff50ace3b9fced82451a828b1087214c", "tree": "18d9039da7f45a935c6440242ae47d866c57bf1d", "parents": [ "ae760ef2f4a9fe31478f9c10215b7f252b94efe6", "9a2cdc337fb3b897863e0c4449d32e99bff8719f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:44 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:44 2012 -0800" }, "message": "Merge \"msm_fb: HDMI: Cleanup HDMI audio off sequence\" into jb_2.5" }, { "commit": "ae760ef2f4a9fe31478f9c10215b7f252b94efe6", "tree": "d9999d73cd8b85e9e09a2240d0a4f7b4337bd62b", "parents": [ "09081f31d01b2dabe7bc61c9eeaac9c521c9e754", "fe4fb27ebe49e8a94cad680fcd062fa20852c054" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:42 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:42 2012 -0800" }, "message": "Merge \"msm_fb: dtv: Serve device off in a separate thread\" into jb_2.5" }, { "commit": "09081f31d01b2dabe7bc61c9eeaac9c521c9e754", "tree": "9e7ef8b9b6bf1ca45494ab9b61e9f07008d13c4c", "parents": [ "5e69c31fcc7a9468a2a1edcdb583451d8d35394b", "cddf7f62362f385702a69c9c224289fc0a51bc1a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:41 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:41 2012 -0800" }, "message": "Merge \"msm_fb: HDMI: Cleanup HPD software debouncing logic\" into jb_2.5" }, { "commit": "5e69c31fcc7a9468a2a1edcdb583451d8d35394b", "tree": "3309b548d22c628c5934bd72de623816d74390c2", "parents": [ "69be5107cf7adeb9e0639e47b3399915951fb3e2", "347465306cbe3684c1b7a8ce31380cae2c0e27f5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:39 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:39 2012 -0800" }, "message": "Merge \"msm_fb: hdmi: black out pipes on unset\" into jb_2.5" }, { "commit": "69be5107cf7adeb9e0639e47b3399915951fb3e2", "tree": "53d2e24aaf51cb3c377ed8bcfd4be6192fc42c88", "parents": [ "232abcd5b9a0bf338eb4cec696887fade653266a", "a712fe7b1adad30ae73bb9c4a3e9d3ab9e437642" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:37 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:37 2012 -0800" }, "message": "Merge \"msm_fb: hdmi: Proper update of ACR CTRL Register\" into jb_2.5" }, { "commit": "232abcd5b9a0bf338eb4cec696887fade653266a", "tree": "7c49b88354341b6c804be26970ed8ea012633b8b", "parents": [ "b3a0ca653ae8f7eb5b5e69e485f6cd962b62957f", "454d607098e29d141d74f17e1e28c733b3e5bd56" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:36 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:36 2012 -0800" }, "message": "Merge \"msm_fb: HDMI: Remove HDCP Kernelconfig\" into jb_2.5" }, { "commit": "b3a0ca653ae8f7eb5b5e69e485f6cd962b62957f", "tree": "3a7df5afee9bfd5f4bb0617b51c7ee2324682907", "parents": [ "639f258f2a6fb97bb0dfb650a78489bd4bb60945", "40d9e8facd3daa9cf29424d09343f839e883405a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:34 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:34 2012 -0800" }, "message": "Merge \"msm_fb: HDMI: Driver changes to support HDCP module parameter\" into jb_2.5" }, { "commit": "639f258f2a6fb97bb0dfb650a78489bd4bb60945", "tree": "c85a50f780c18bbeb0538e00239648c446ba8690", "parents": [ "e305f6a6084819210aff5585df921ad33fd51854", "55134dcef28fef25f354fa3b553468fe71e99bb3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:32 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:32 2012 -0800" }, "message": "Merge \"msm_fb: HDMI: Add module parameter to disable HDCP\" into jb_2.5" }, { "commit": "e305f6a6084819210aff5585df921ad33fd51854", "tree": "f7cc1d1943809647effadcf398c1d158d59d4f6f", "parents": [ "24e30389c5f5f6a66b51410803dd772fc93c3863", "22ffc7df1557e09ebae2370193161822dd83089e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:30 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:30 2012 -0800" }, "message": "Merge changes I02d9814e,Ia0543e45 into jb_2.5\n\n* changes:\n msm_fb: hdmi: Soft debouncing logic improvements\n msm_fb: hdmi: Correct checksum value\n" }, { "commit": "24e30389c5f5f6a66b51410803dd772fc93c3863", "tree": "dcb2d2bd3f7fc1cc21a12de59c0ef61561efc1a0", "parents": [ "3331be1978c2bc1f0a8c0f95ad104d4413f2f3d3", "aaece71eaa304387f800eeb39bac0ac1d70cd68b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 22 23:21:28 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Thu Nov 22 23:21:28 2012 -0800" }, "message": "Merge \"Revert \"msm_fb: HDMI: Add support for hdmi_audio switch node\"\" into jb_2.5" }, { "commit": "3331be1978c2bc1f0a8c0f95ad104d4413f2f3d3", "tree": "86cb54554be44234ec4c2d89b38eb8eed2af6c96", "parents": [ "09705d69abdfd5cf31603bb62f9c301a91a486c9", "181fc587a179363624b9a3b47bcd0c04c05a8553" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 21 18:33:27 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Nov 21 18:33:27 2012 -0800" }, "message": "Merge \"Bluetooth: Disable BlueZ driver/stack\" into jb_2.5" }, { "commit": "d6556676aeefa9b4a89455ca4fca3cc86e97c3ed", "tree": "2fbdf5c9ed92e52805a30f3f2a3a18b076e7a419", "parents": [ "1252b438fa0c58584012f5bbf05141b59a36d029" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Fri Nov 02 15:34:44 2012 -0700" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 17:00:51 2012 -0800" }, "message": "msm_fb: HDMI: Turn on HDMI core only for supported resolution\n\nUpon receiving the notification of an HDMI cable connection,\nturn on HDMI core only if the default video resolution is\nsupported by the sink. Otherwise, HDMI core would be turned\non at a later time when it is configured with a supported\nresolution by the userspace.\n\nCRs-Fixed: 412575\nChange-Id: I67cfb09bafa39646839877a66cd94f193c127a76\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "1252b438fa0c58584012f5bbf05141b59a36d029", "tree": "53a0e9d3070b0f9ecd1770ac15695dd4cc46e373", "parents": [ "cf44e5f654639430fb9536c2b5335f696fabd44f" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Tue Oct 30 14:59:26 2012 -0700" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 17:00:45 2012 -0800" }, "message": "msm_fb: HDMI: Cleanup of HDMI switch device notifications\n\nHDMI switch device is used to notify userspace components of the\navailabilty of a connected HDMI sink. These notification should\nonly be sent whenever HDMI cable is connected or disconnected.\nThis patch removes all the redundant notifications.\n\nCRs-Fixed: 412575\nChange-Id: Ia5e60690a87569fce5d61a9af75d446648443e9b\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "cf44e5f654639430fb9536c2b5335f696fabd44f", "tree": "026fe912fac45431a06a210171d83e2e6bdef13e", "parents": [ "9a2cdc337fb3b897863e0c4449d32e99bff8719f" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Fri Oct 26 18:11:23 2012 -0700" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 17:00:39 2012 -0800" }, "message": "msm_fb: HDMI: Add support for HDMI audio switch device node\n\nAdd support for audio switch node in the HDMI driver that would\nbe used to notify audio userspace components of the availability\nof an HDMI device.\n\nCRs-Fixed: 412575\nChange-Id: Idc41caf234810db52af9fcc89d2ed4ecbcaafc3b\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "9a2cdc337fb3b897863e0c4449d32e99bff8719f", "tree": "2511ddd0565692b2cf9e257b807770888885ad3c", "parents": [ "fe4fb27ebe49e8a94cad680fcd062fa20852c054" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Fri Nov 02 14:32:41 2012 -0700" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 17:00:34 2012 -0800" }, "message": "msm_fb: HDMI: Cleanup HDMI audio off sequence\n\nHDMI core should not be powered down until the audio engine has\nshutdown transmitting packets to the HDMI core. This change\nincreases the time for which the driver waits for the audio\nengine to turn off.\n\nCRs-Fixed: 412575\nChange-Id: Ie11ab6c8140f7289f74da4877c9acf9b8cd4a838\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "fe4fb27ebe49e8a94cad680fcd062fa20852c054", "tree": "f970d22c6257ffe5643cc36a5542d16aaa18ef29", "parents": [ "cddf7f62362f385702a69c9c224289fc0a51bc1a" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 07 18:27:23 2012 -0800" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 17:00:27 2012 -0800" }, "message": "msm_fb: dtv: Serve device off in a separate thread\n\nDTV device should not be powered down until the audio engine has\nshutdown. This change moves dtv audio off sequence to a separate\nthread so that framebuffer close system call does not get blocked.\n\nCRs-Fixed: 412575\nChange-Id: I246a9e58f1367e653913773696510f375abf3d3a\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "cddf7f62362f385702a69c9c224289fc0a51bc1a", "tree": "5cb1393355d42c863d7e366424f4d5bb17de19ca", "parents": [ "347465306cbe3684c1b7a8ce31380cae2c0e27f5" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Oct 31 16:26:41 2012 -0700" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 17:00:14 2012 -0800" }, "message": "msm_fb: HDMI: Cleanup HPD software debouncing logic\n\nImplement Hot Plug Detect (HPD) software debouncing by\ndisabling the HPD interrupt until we finish processing\na previous HPD interrupt.\n\nCRs-Fixed: 412575\nChange-Id: Ia2c83f3446d09fe5bf6c6a1c4e6a9eb54ff465d6\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "347465306cbe3684c1b7a8ce31380cae2c0e27f5", "tree": "40aa339c4e8f9deec69ad4afad4ef621d3e6aa0b", "parents": [ "a712fe7b1adad30ae73bb9c4a3e9d3ab9e437642" ], "author": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Sat Nov 03 02:39:20 2012 +0530" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 17:00:08 2012 -0800" }, "message": "msm_fb: hdmi: black out pipes on unset\n\nFor HDMI as primary case, we need to blackout the pipes\nwhen they are unset so that any residue is not visible\non the DTV during suspend.\n\nChange-Id: I2bf36f1002dd185c26fe6c4291977737daa73ae1\nSigned-off-by: Ajay Singh Parmar \u003caparmar@codeaurora.org\u003e\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "a712fe7b1adad30ae73bb9c4a3e9d3ab9e437642", "tree": "b77165b4e1a240b68cb39810a51048792d72a709", "parents": [ "454d607098e29d141d74f17e1e28c733b3e5bd56" ], "author": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Fri Oct 12 19:06:16 2012 +0530" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 17:00:01 2012 -0800" }, "message": "msm_fb: hdmi: Proper update of ACR CTRL Register\n\nWhile changing the audio sampling rate, the older data in\nthe control register needs to cleaned before writing in\nnew data to avoid mixed or wrong data writing.\n\nCRs-Fixed: 405772\nChange-Id: I95d0807ea8cf544e4a0c8caed00de6cd60352efa\nSigned-off-by: Ajay Singh Parmar \u003caparmar@codeaurora.org\u003e\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "454d607098e29d141d74f17e1e28c733b3e5bd56", "tree": "2a7fd80826d28325dd84f5d70502ee697775c1be", "parents": [ "40d9e8facd3daa9cf29424d09343f839e883405a" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Sep 12 17:00:27 2012 -0700" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 16:59:54 2012 -0800" }, "message": "msm_fb: HDMI: Remove HDCP Kernelconfig\n\nRemove the kernel config parameter for HDCP since enabling or\ndisabling HDCP will now be controlled using a corresponding\nmodule parameter.\n\nChange-Id: Iae23b8fa66ca75d99423547e77f850f3c86615ee\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "40d9e8facd3daa9cf29424d09343f839e883405a", "tree": "c226e38620e5d2fa384b68f64d66744a112c8f2a", "parents": [ "55134dcef28fef25f354fa3b553468fe71e99bb3" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Fri Sep 07 16:08:10 2012 -0700" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 16:59:46 2012 -0800" }, "message": "msm_fb: HDMI: Driver changes to support HDCP module parameter\n\nThis change removes the need to use HDCP feature flags in the\nHDMI driver and adds the necessary support to configure HDCP\nfeature based on a module parameter.\n\nChange-Id: Ie0eacc5b447230927cfdedfcb979c22d60e81981\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "55134dcef28fef25f354fa3b553468fe71e99bb3", "tree": "ed54d319c6adbe162fc0270d5acca376e76578b1", "parents": [ "22ffc7df1557e09ebae2370193161822dd83089e" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Tue Sep 11 18:10:33 2012 -0700" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 16:59:38 2012 -0800" }, "message": "msm_fb: HDMI: Add module parameter to disable HDCP\n\nThis change adds a module parameter that can be used\nto disable HDCP at runtime by specifying hdmi_msm.hdcp\u003d0\non the fastboot command line.\n\nChange-Id: Ifad5da9fcb86fb4ed663a5ef2bb14fe4dafd241e\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "22ffc7df1557e09ebae2370193161822dd83089e", "tree": "09e5d9fca5cbfa211bc9d45124c12653983e6b80", "parents": [ "5e466b058599eaff2a9434ed883325b26b202f78" ], "author": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Mon Jul 30 20:12:34 2012 +0530" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 16:59:30 2012 -0800" }, "message": "msm_fb: hdmi: Soft debouncing logic improvements\n\nCurrently, HPD(Hot Plug Detection, a module used for detecting\nHDMI cable connection) soft debouncing logic implements around\n1 sec mechanism to stabilize HPD event detection. In case of\nfast HPD connect/disconnect, it is missing a real HPD event.\nThis change implements a new debouncing logic in driver which\nwill make sure the first real HPD event is correctly processed\nand at the end of debouncing processing, if there is a change\nin HPD state, the changed state is also processed. This way we\nalways process the change of HPD states.\n\nCRs-Fixed: 384513\nChange-Id: I02d9814e4a55b7eec11a8e0d134c9ed9b5747422\nSigned-off-by: Ajay Singh Parmar \u003caparmar@codeaurora.org\u003e\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "5e466b058599eaff2a9434ed883325b26b202f78", "tree": "ba03a0e5bea00118942f91c432186e8015c83e8b", "parents": [ "aaece71eaa304387f800eeb39bac0ac1d70cd68b" ], "author": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Mon Aug 27 11:07:32 2012 +0530" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 16:59:22 2012 -0800" }, "message": "msm_fb: hdmi: Correct checksum value\n\nThis change writes the checksum value to registers after\ndoing all the calculations so that the correct checksum\nvalue is transmitted.\n\nCRs-Fixed: 388272\nChange-Id: Ia0543e458d5a11b148bd29e0d57ae355a051b2a9\nSigned-off-by: Ajay Singh Parmar \u003caparmar@codeaurora.org\u003e\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "aaece71eaa304387f800eeb39bac0ac1d70cd68b", "tree": "a8d673e7f3ebb4c35103955c10ad5d997c471189", "parents": [ "65213ed8d0cc3459e7c39f140593a5f77c315ad7" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 11:46:21 2012 -0800" }, "committer": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Nov 21 16:58:11 2012 -0800" }, "message": "Revert \"msm_fb: HDMI: Add support for hdmi_audio switch node\"\n\nThis reverts commit 99001c9c4fd2239a2af633471ef78eb8d569e60f.\n\nChange-Id: Id7532ba0b3141f7495a2742f747ce3f7e3f88c91\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "09705d69abdfd5cf31603bb62f9c301a91a486c9", "tree": "f5557e8cd30ccfda2b4b17a6c382a643986f4dc2", "parents": [ "3895ed2477425f5d99f92d20c50a20da0c197088", "01819963a0f309628b7cd8e4213d952974078ccf" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 21 16:47:24 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Nov 21 16:47:24 2012 -0800" }, "message": "Merge \"mfd: wcd9xxx: Add WCD9304 1.2 version codec chip entry\" into jb_2.5" }, { "commit": "3895ed2477425f5d99f92d20c50a20da0c197088", "tree": "ef934eb34caa489449fd7c58e694b5bd1ac96b5f", "parents": [ "5350694a7c85dcd1117a01b6b1207021f3ad1471", "a3ceef814051bee3fd849ccd0177847f82701dc1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 21 16:47:20 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Nov 21 16:47:20 2012 -0800" }, "message": "Merge \"mfd: wcd9xxx: Check for wcd9xxx_read error\" into jb_2.5" }, { "commit": "5350694a7c85dcd1117a01b6b1207021f3ad1471", "tree": "6a0d8d56cab3043b293b435ad13d1daab5879205", "parents": [ "98c13b8c3339ac18e10d2669e43e731d043411d1", "5f8fc7ac58595d828e38e39c2fd67e2cb559b3cc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 21 16:47:17 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Nov 21 16:47:17 2012 -0800" }, "message": "Merge \"mfd: wcd9xxx: Continue to probe codec without interrupt\" into jb_2.5" }, { "commit": "98c13b8c3339ac18e10d2669e43e731d043411d1", "tree": "b16fe9f9aef04f0cb8df42bf735ba170b5e6deaa", "parents": [ "65213ed8d0cc3459e7c39f140593a5f77c315ad7", "8530609eefc16add493bce6fbb55500e60b6bc9f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 21 16:47:13 2012 -0800" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Wed Nov 21 16:47:13 2012 -0800" }, "message": "Merge \"ASoC: msm: reduce period_bytes_min for voice call\" into jb_2.5" }, { "commit": "01819963a0f309628b7cd8e4213d952974078ccf", "tree": "eda9d135619a01cc10f47b341133e76b8e934991", "parents": [ "a3ceef814051bee3fd849ccd0177847f82701dc1" ], "author": { "name": "Venkat Sudhir", "email": "vsudhir@codeaurora.org", "time": "Mon Oct 01 16:26:03 2012 -0700" }, "committer": { "name": "Mingming Yin", "email": "mingming@codeaurora.org", "time": "Tue Nov 20 17:19:28 2012 -0800" }, "message": "mfd: wcd9xxx: Add WCD9304 1.2 version codec chip entry\n\n-Add chip byte information for WCD9304 1.2 version.\n This information is required for correct detection\n of the codec at the codec init.\n-Fix code to exit codec init with error, if codec\n detection fails.\n\nChange-Id: I6b5522f6fb4d7b18011da2bedd322c4a480a5175\nSigned-off-by: Venkat Sudhir \u003cvsudhir@codeaurora.org\u003e\n" }, { "commit": "a3ceef814051bee3fd849ccd0177847f82701dc1", "tree": "8745bb42ab68a5d1461be6fa1e922931606b48dd", "parents": [ "5f8fc7ac58595d828e38e39c2fd67e2cb559b3cc" ], "author": { "name": "Venkat Sudhir", "email": "vsudhir@codeaurora.org", "time": "Thu Sep 06 11:27:32 2012 -0700" }, "committer": { "name": "Mingming Yin", "email": "mingming@codeaurora.org", "time": "Tue Nov 20 17:19:20 2012 -0800" }, "message": "mfd: wcd9xxx: Check for wcd9xxx_read error\n\nCheck for for wcd9xx read error properly during probe.\nMove the determination of codec type to function and\ncheck for interface error during read operation for\nI2C. Since slimbus master is changed the slim porbe\nmay be called later to I2C probe. Handle proper\nreleasing of reset gpio in case there was error\nfor I2C read.\n\nChange-Id: I6e8e271861e5bf7fee5df63b5ac265b7976f83d2\nSigned-off-by: Venkat Sudhir \u003cvsudhir@codeaurora.org\u003e\n" }, { "commit": "5f8fc7ac58595d828e38e39c2fd67e2cb559b3cc", "tree": "4c15c30d55d0c26aa9c5baf784a475f6130578c3", "parents": [ "65a49b99d1477fb62285fa65fce46fbc63f769c6" ], "author": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Tue Aug 28 17:21:24 2012 -0700" }, "committer": { "name": "Mingming Yin", "email": "mingming@codeaurora.org", "time": "Tue Nov 20 17:19:05 2012 -0800" }, "message": "mfd: wcd9xxx: Continue to probe codec without interrupt\n\nDon\u0027t treat as an error when no interrupt is configured.\nInterrupts are not mandatory for codec driver and hardware.\n\nChange-Id: Ic54f2cdf6f4916db89700b745d82e199bdccf48c\nSigned-off-by: Joonwoo Park \u003cjoonwoop@codeaurora.org\u003e\n" }, { "commit": "65213ed8d0cc3459e7c39f140593a5f77c315ad7", "tree": "a8adf6ac6d06cb791b17a382b2fd908018e9359d", "parents": [ "c9f51b9b0353671662fed485932b48b4e89bd2dc" ], "author": { "name": "Patrick Daly", "email": "pdaly@codeaurora.org", "time": "Tue Aug 28 13:36:31 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:40:22 2012 -0800" }, "message": "msm: acpuclock-8930: Support PMIC 8917\n\nIf the PMIC 8917 device is detected, then enable s8 regulator\nbefore turning on the l23 hfpll regulator.\n\nUse platform_data to indicate presence of pm8917.\n\nChange-Id: Ic39b460d6de14d37b9ca477494c35d90c9468780\nSigned-off-by: Patrick Daly \u003cpdaly@codeaurora.org\u003e\n(cherry picked from commit 037d49156df9c34068c0942489c8ba24c52a4ad6)\n" }, { "commit": "c9f51b9b0353671662fed485932b48b4e89bd2dc", "tree": "3117bf133f191719bab5293f789731fdc5414258", "parents": [ "b1d5f753eecf794797961c5bfac5ba1aea113646" ], "author": { "name": "Patrick Daly", "email": "pdaly@codeaurora.org", "time": "Mon Aug 27 16:10:26 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:40:12 2012 -0800" }, "message": "msm: clock-8960: Support new PMIC 8917 for 8930\n\nSupport detection of PMIC device type from board file.\n\nEnable parent RPM_VREG_ID_PM8917_S8 regulator before turning on\nHF_PLL/SR2 pll regulator, similar to 8960.\n\nSigned-off-by: Patrick Daly \u003cpdaly@codeaurora.org\u003e\n(cherry picked from commit 1a3859fad1c2c0eb6f93464b9782fc0b1cb6ab14)\n\nChange-Id: Ic2786f5957f793db482ef09c17752e2decb34301\nSigned-off-by: Sudhir Sharma \u003csudsha@codeaurora.org\u003e\n" }, { "commit": "b1d5f753eecf794797961c5bfac5ba1aea113646", "tree": "657f672384f93b5899f359dc5eff1faa7231b6ad", "parents": [ "a3b73c45f6264fb79d2cd030fdb75e7dede2ceed" ], "author": { "name": "Patrick Daly", "email": "pdaly@codeaurora.org", "time": "Mon Aug 27 16:25:07 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:40:02 2012 -0800" }, "message": "msm: board-8930: Detect PMIC 8917 device for initialization\n\nCall a different set of clock initialization functions if the 8917\npmic device is detected.\n\nChange-Id: I6e02e300c2f403248351831c2b18e620352dfcab\nSigned-off-by: Patrick Daly \u003cpdaly@codeaurora.org\u003e\n(cherry picked from commit 8fad60d97d663b8d0dd5e30c637d7433cf6b5502)\n" }, { "commit": "a3b73c45f6264fb79d2cd030fdb75e7dede2ceed", "tree": "a96c3c0d351ec705918a4af6735a415e38c1bd8f", "parents": [ "fa3d06deb4e2cf1e797fc6a4af796677d1e8560d" ], "author": { "name": "Patrick Daly", "email": "pdaly@codeaurora.org", "time": "Tue Aug 28 13:39:17 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:39:50 2012 -0800" }, "message": "msm: board-8930: Indicate presence of pm8917 to acpuclk driver\n\nSet a platform_data parameter if pm8917 is detected.\n\nChange-Id: Iba56e28f88162f73a2d499dfd1d9921ab29c44d0\nSigned-off-by: Patrick Daly \u003cpdaly@codeaurora.org\u003e\n(cherry picked from commit c1227cb45a8b17a10410db436a1c84893f500c34)\n" }, { "commit": "fa3d06deb4e2cf1e797fc6a4af796677d1e8560d", "tree": "a6a80a0440c19b308c88610fe2d30e36d5cc2a7d", "parents": [ "ccda9e709b64c884bada18f5548d778dcdd4afb3" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Oct 09 10:29:46 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:39:37 2012 -0800" }, "message": "msm: board-8930: Do not send PM8917 LDO 1 regulator request to RPM\n\nModify the PM8917 LDO 1 configuration data so that no request\nis sent automatically to enable LDO 1 on MSM8930 + PM8917\ntargets. This is an optimization which helps to achieve power\nsavings during XO shutdown.\n\nChange-Id: I87f89b03c43e60727737f22205745a4c911a14df\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit bd2f4f171852ce4e93b54b9d20c59d908cd50838)\n" }, { "commit": "ccda9e709b64c884bada18f5548d778dcdd4afb3", "tree": "9e39aaa16c5f7ac303bba54073ea5daf4f8794aa", "parents": [ "10bc20209fbff4c06c86dab653e39ebadcf2baee" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Oct 04 12:17:31 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:39:25 2012 -0800" }, "message": "msm: board-8930: Use auto mode for PM8917 SMPS 7\n\nChange the configuration of PM8917 SMPS 7 for MSM8930 so that RPM\nrequests are sent with a force mode of \u0027auto\u0027. This is needed in\norder to reduce power consumption when modem and LPASS are asleep.\n\nChange-Id: I4935cf53d9b5291291fe3ba42955af41080b0d33\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit 6f250cd14c25c783c47fe35729ebc19480c45695)\n" }, { "commit": "10bc20209fbff4c06c86dab653e39ebadcf2baee", "tree": "5e4bc7628f21ab669d9665e8f1efc219deead190", "parents": [ "fafa952ec8b202a89918287d98b12106f7759fb5" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Oct 02 15:05:28 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:38:51 2012 -0800" }, "message": "msm: board-8064: Use 8960_PM8917 rpm-regulator version with PM8917\n\nUtilize the 8960_PM8917 rpm-regulator version when PM8917 is\ndetected so that the TCXO workaround is applied to PM8917\nregulators L25, L26, L27, and L28 on APQ8064 targets.\n\nChange-Id: Ie62f89fd534493cc74987d26c6746b2283f7963f\nCRs-Fixed: 405336\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit e93ed7dda0b0cc41033d28ce325a29022a47d984)\n" }, { "commit": "fafa952ec8b202a89918287d98b12106f7759fb5", "tree": "10f088ed84a9912d750e463db2e2cd82cfb30932", "parents": [ "2a23838947022a9914ca81a7b90affdd959e36ca" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Oct 02 14:56:21 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:38:39 2012 -0800" }, "message": "msm: rpm-regulator: Add PM8917 N1200 TCXO workaround support for 8960/8064\n\nAdd support into rpm-regulator-8960 for using the TCXO workaround\non PM8917 1200mA NLDOs on MSM8960 and APQ8064. PM8917 regulators\nL25, L26, L27, and L28 require that CXO be ON when they are\nenabled. Configure these regulators so that they operate\ncorrectly on systems which utilize TCXO.\n\nChange-Id: I7c25de3f32228c9a57ba4030211acb73ea7cbf5b\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit 2ac36d590ecb7d9eb10c82ee7d5801a8ba436303)\n" }, { "commit": "2a23838947022a9914ca81a7b90affdd959e36ca", "tree": "61268bc500bb68425c58894d4f6b3b4ad9610f17", "parents": [ "b28275f314160376a7f5141632020473aa1a111c" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Thu May 31 10:21:33 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:38:26 2012 -0800" }, "message": "mfd: pm8xxx-misc: add PM8917 in PM8921 cases\n\nPM8917 is in the same family as PM8921. Add it in all cases of\nPM8921 where it applies.\n\nChange-Id: I2bf3937ed7e80355a8d5b330f18298bf040d585b\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit a813d5f4d82a2eedf7b8813fa03cf9e8af236a68)\n" }, { "commit": "b28275f314160376a7f5141632020473aa1a111c", "tree": "24a0f1a427a7053a2f916d835e72ebc152d7e233", "parents": [ "b2d799d95114a8abe864093017e572412b84da1d" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Mon Aug 13 12:32:12 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:38:13 2012 -0800" }, "message": "ASoC: msm8930: Add speaker playback support for 8930+8917\n\nPM8917 does not have speaker amplifier, hence the codec lineout\nis directed to the speaker through a onboard amplifier. The\namplifier needs to be enabled in order for speaker playback\nto work on a target with PM8917\n\nChange-Id: Ic9f16d335bc1a0cef6fb1eb93c1617fd086cc5b7\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n(cherry picked from commit f6d1f7261de810bb07429c25b99187328359b8c4)\n" }, { "commit": "b2d799d95114a8abe864093017e572412b84da1d", "tree": "1efbc05b50adca16e1737e1754b053c07ad63ad3", "parents": [ "ff4f9ce9cd059621b623c508917a17df1c5686ed" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Fri Aug 24 17:54:00 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:37:51 2012 -0800" }, "message": "msm: 8960/8064/8930: add has_dc_supply property.\n\nAll CDP platforms are powered by an external DC\nsupply. Hence set the has_dc_supply flag to\nallow the charger driver to handle it accordingly.\n\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n(cherry picked from commit b7bf2c9c3fd56d70bc90676c1781300c435a40fa)\n(cherry picked from commit bc24067bc9e696e4f43d555b2bba72539ceb3b35)\n\nChange-Id: If18f0172ebcd6e081da02de3f864f35094a02efc\nSigned-off-by: Sudhir Sharma \u003csudsha@codeaurora.org\u003e\n" }, { "commit": "ff4f9ce9cd059621b623c508917a17df1c5686ed", "tree": "ab3cd1d1aa2e4e1a52d74d4fef401d8509cfb380", "parents": [ "054a5b70024f0821244d777a71915e57849921a6" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Fri Aug 24 15:11:23 2012 -0700" }, "committer": { "name": "Gerrit - the friendly Code Review server", "email": "code-review@localhost", "time": "Tue Nov 20 12:37:03 2012 -0800" }, "message": "power: pm8921-charger: report DC online for some platforms.\n\nSome hardware platforms can supply VPH_PWR without battery\nor charger being present.\n\nTo avoid shutting down due to no connected power sources\nfrom the perspective of software set a flag that forces\nthe DC supply to be online for this type of platform.\n\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n(cherry picked from commit a3cf943ef8c91435e2cb94b8e8bcc482dc65cb27)\n\nConflicts:\n\n\tdrivers/power/pm8921-charger.c\n\nChange-Id: I565edb1ab797384481ce5e37aee73ee0a8e80428\nSigned-off-by: Sudhir Sharma \u003csudsha@codeaurora.org\u003e\n" }, { "commit": "054a5b70024f0821244d777a71915e57849921a6", "tree": "aacab830620dd70061712c430a01ad30cccdab88", "parents": [ "7afbd4c5255f87e0e47116575a14eccb310ac563" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Fri Aug 10 17:24:38 2012 -0700" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 19 16:16:11 2012 -0800" }, "message": "msm: board-8930: Add backlight control when using PM8917\n\nUse PM8917 GPIO 24 to enable and disable the LCD backlight on\ntargets which use PM8917 as WLED is not available.\n\nChange-Id: Id2fa1bb01d174d38ee9d846261750e971a96cfd2\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit 9898ac37c3cb68c0a2706b1496bb5e6c2dd8f667)\n" }, { "commit": "7afbd4c5255f87e0e47116575a14eccb310ac563", "tree": "22c25cb1daf50fc4c4f3101f9984da2edff7c31f", "parents": [ "c6e04698362b075a7f576471412c779b03fd8498" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Mon Aug 13 12:31:04 2012 -0700" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 19 16:15:38 2012 -0800" }, "message": "msm: rpm-regulator: Add support for MSM8930 + PM8917\n\nWhen using PMIC PM8917 along with MSM8930, the RPM resource map\nchanges from that which is used with stock MSM8930 + PM8038. Add\nsupport for the new resource map.\n\nChange-Id: I4817872022f828dab055144959dfdfbd83e99e11\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit d2a4fefd4c6ca176715cb297edd63e141d19a4fb)\n" }, { "commit": "c6e04698362b075a7f576471412c779b03fd8498", "tree": "33a8c19f91c02f9a8ee8b8dee86f1b3c6804823f", "parents": [ "86161e4e83207c363150593c1a1caf13e62f2308" ], "author": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Fri Aug 10 16:26:37 2012 -0600" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 19 16:15:00 2012 -0800" }, "message": "msm: rpm-8930: Add RPM enumeration to support PMIC 8917\n\nMSM8930 can support PMIC8917 in leiu of PM8038. Add RPM enumeration to\nsupport the new PMIC and use runtime detection to use the right\nenumeration data.\n\nChange-Id: Ibf287a99143ffd52934ce043be65cae0afa136c8\nSigned-off-by: Praveen Chidambaram \u003cpchidamb@codeaurora.org\u003e\n(cherry picked from commit 75b8c81615010a78c9efc309aa61afec1552b467)\n" }, { "commit": "86161e4e83207c363150593c1a1caf13e62f2308", "tree": "760a8693d1cf80d6d19787b1f5186842df882645", "parents": [ "044999878008949f066246333a85c03fd04e9506" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Mon Aug 20 12:17:09 2012 -0700" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 19 16:14:07 2012 -0800" }, "message": "msm: board-8930: Add regulator board file for MSM8930+PM8917\n\nAdd the board file board-8930-regulator-pm8917.c to capture\nregulator configuration and mappings for MSM8930 targets which\nutilize a PM8917. Add code into other MSM8930 board files to\nconditionally switch to the new regulator configuration values\nif PM8917 is detected at runtime.\n\nChange-Id: I68c1025bae45d77d1a04a8935dc7ecb2d857b8ef\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit 4614cb939178736abca452d468bd291272afbf86)\n" }, { "commit": "044999878008949f066246333a85c03fd04e9506", "tree": "4c93b0c462938e3b062c7a2b2f99045da0ae11fb", "parents": [ "65a49b99d1477fb62285fa65fce46fbc63f769c6" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Mon Aug 06 15:02:03 2012 -0700" }, "committer": { "name": "Sudhir Sharma", "email": "sudsha@codeaurora.org", "time": "Mon Nov 19 16:09:24 2012 -0800" }, "message": "msm: board-8930: Add support for PMIC PM8917\n\nAdd support for boards consisting of MSM8930 + PM8917.\nConditionally Remove configuration for peripherals not present in\nPM8917. Also remap GPIOs and MPPs as follows:\n\nGPIOs:\nPM8038 PM8917\n1 24\n2 25\n3 27\n4 19\n5 25\n6 23\n7 38\n8 28\n9 20\n10 36\n11 37\n12 21\n\nMPPs:\nPM8038 PM8917\n1 5\n2 6\n3 10\n4 8\n5 7\n6 9\n\nChange-Id: I38166aaa85271b9d7f857f27b070fc36a0d0a803\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n(cherry picked from commit fd344aa2e4fc70cb33b0a0623577662288a7674e)\n" }, { "commit": "181fc587a179363624b9a3b47bcd0c04c05a8553", "tree": "c67440e114a5eba6ccf1e436122eb8285398f229", "parents": [ "65a49b99d1477fb62285fa65fce46fbc63f769c6" ], "author": { "name": "Sunny Kapdi", "email": "sunnyk@codeaurora.org", "time": "Fri Nov 16 17:59:19 2012 -0800" }, "committer": { "name": "Satish kumar sugasi", "email": "ssugas@codeaurora.org", "time": "Mon Nov 19 15:31:11 2012 -0800" }, "message": "Bluetooth: Disable BlueZ driver/stack\n\nDisable BlueZ\u0027s smd/uart transport driver and stack components in kernel.\n\nChange-Id: I0196f890c4d25bad6a7015da14ef99495cda0589\nSigned-off-by: Sunny Kapdi \u003csunnyk@codeaurora.org\u003e\n" } ], "next": "8530609eefc16add493bce6fbb55500e60b6bc9f" }