)]}' { "log": [ { "commit": "d358788f3f30113e49882187d794832905e42592", "tree": "8c796ee4bf719dad4d3947c03cef2f3fd6cb5940", "parents": [ "7705a8792b0fc82fd7d4dd923724606bbfd9fb20" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Mon Mar 20 20:00:09 2006 +0000" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Mon Mar 20 20:00:09 2006 +0000" }, "message": "[SERIAL] kernel console should send CRLF not LFCR\n\nGlen Turner reported that writing LFCR rather than the more\ntraditional CRLF causes issues with some terminals.\n\nSince this aflicts many serial drivers, extract the common code\nto a library function (uart_console_write) and arrange for each\ndriver to supply a \"putchar\" function.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "33f0f88f1c51ae5c2d593d26960c760ea154c2e2", "tree": "f53a38cf49406863f079d74d0e8f91b276f7c1a9", "parents": [ "6ed80991a2dce4afc113be35089c564d62fa1f11" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Mon Jan 09 20:54:13 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Tue Jan 10 08:01:59 2006 -0800" }, "message": "[PATCH] TTY layer buffering revamp\n\nThe API and code have been through various bits of initial review by\nserial driver people but they definitely need to live somewhere for a\nwhile so the unconverted drivers can get knocked into shape, existing\ndrivers that have been updated can be better tuned and bugs whacked out.\n\nThis replaces the tty flip buffers with kmalloc objects in rings. In the\nnormal situation for an IRQ driven serial port at typical speeds the\nbehaviour is pretty much the same, two buffers end up allocated and the\nkernel cycles between them as before.\n\nWhen there are delays or at high speed we now behave far better as the\nbuffer pool can grow a bit rather than lose characters. This also means\nthat we can operate at higher speeds reliably.\n\nFor drivers that receive characters in blocks (DMA based, USB and\nespecially virtualisation) the layer allows a lot of driver specific\ncode that works around the tty layer with private secondary queues to be\nremoved. The IBM folks need this sort of layer, the smart serial port\npeople do, the virtualisers do (because a virtualised tty typically\noperates at infinite speed rather than emulating 9600 baud).\n\nFinally many drivers had invalid and unsafe attempts to avoid buffer\noverflows by directly invoking tty methods extracted out of the innards\nof work queue structs. These are no longer needed and all go away. That\nfixes various random hangs with serial ports on overflow.\n\nThe other change in here is to optimise the receive_room path that is\nused by some callers. It turns out that only one ldisc uses receive room\nexcept asa constant and it updates it far far less than the value is\nread. We thus make it a variable not a function call.\n\nI expect the code to contain bugs due to the size alone but I\u0027ll be\nwatching and squashing them and feeding out new patches as it goes.\n\nBecause the buffers now dynamically expand you should only run out of\nbuffering when the kernel runs out of memory for real. That means a lot of\nthe horrible hacks high performance drivers used to do just aren\u0027t needed any\nmore.\n\nDescription:\n\ntty_insert_flip_char is an old API and continues to work as before, as does\ntty_flip_buffer_push() [this is why many drivers dont need modification]. It\ndoes now also return the number of chars inserted\n\nThere are also\n\ntty_buffer_request_room(tty, len)\n\nwhich asks for a buffer block of the length requested and returns the space\nfound. This improves efficiency with hardware that knows how much to\ntransfer.\n\nand tty_insert_flip_string_flags(tty, str, flags, len)\n\nto insert a string of characters and flags\n\nFor a smart interface the usual code is\n\n len \u003d tty_request_buffer_room(tty, amount_hardware_says);\n tty_insert_flip_string(tty, buffer_from_card, len);\n\nMore description!\n\nAt the moment tty buffers are attached directly to the tty. This is causing a\nlot of the problems related to tty layer locking, also problems at high speed\nand also with bursty data (such as occurs in virtualised environments)\n\nI\u0027m working on ripping out the flip buffers and replacing them with a pool of\ndynamically allocated buffers. This allows both for old style \"byte I/O\"\ndevices and also helps virtualisation and smart devices where large blocks of\ndata suddenely materialise and need storing.\n\nSo far so good. Lots of drivers reference tty-\u003eflip.*. Several of them also\ncall directly and unsafely into function pointers it provides. This will all\nbreak. Most drivers can use tty_insert_flip_char which can be kept as an API\nbut others need more.\n\nAt the moment I\u0027ve added the following interfaces, if people think more will\nbe needed now is a good time to say\n\n int tty_buffer_request_room(tty, size)\n\nTry and ensure at least size bytes are available, returns actual room (may be\nzero). At the moment it just uses the flipbuf space but that will change.\nRepeated calls without characters being added are not cumulative. (ie if you\ncall it with 1, 1, 1, and then 4 you\u0027ll have four characters of space. The\nother functions will also try and grow buffers in future but this will be a\nmore efficient way when you know block sizes.\n\n int tty_insert_flip_char(tty, ch, flag)\n\nAs before insert a character if there is room. Now returns 1 for success, 0\nfor failure.\n\n int tty_insert_flip_string(tty, str, len)\n\nInsert a block of non error characters. Returns the number inserted.\n\n int tty_prepare_flip_string(tty, strptr, len)\n\nAdjust the buffer to allow len characters to be added. Returns a buffer\npointer in strptr and the length available. This allows for hardware that\nneeds to use functions like insl or mencpy_fromio.\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nCc: Paul Fulghum \u003cpaulkf@microgate.com\u003e\nSigned-off-by: Hirokazu Takata \u003ctakata@linux-m32r.org\u003e\nSigned-off-by: Serge Hallyn \u003cserue@us.ibm.com\u003e\nSigned-off-by: Jeff Dike \u003cjdike@addtoit.com\u003e\nSigned-off-by: John Hawkes \u003chawkes@sgi.com\u003e\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "f02aa3f9a3dea4375759ae1d87bebf2467719b72", "tree": "8300a735ff96bc107e05df334a8fd05a951c94fe", "parents": [ "9e625ff8a37aefcc177b19614ffcffb5bc6eeea1" ], "author": { "name": "Erik Hovland", "email": "erik@hovland.org", "time": "Fri Dec 30 15:57:35 2005 +0000" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Fri Dec 30 15:57:35 2005 +0000" }, "message": "[ARM] 3216/1: indent and typo in drivers/serial/pxa.c\n\nPatch from Erik Hovland\n\nThis patch provides two changes. An indent is supplied for an if/else clause so that it is more readable. An acronym is incorrectly typed as UER when it should be IER.\n\nSigned-off-by: Erik Hovland \u003cerik@hovland.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "3ae5eaec1d2d9c0cf53745352e7d4b152810ba24", "tree": "d8825be54cefb6ad6707478d719c8e30605bee7b", "parents": [ "00d3dcdd96646be6059cc21f2efa94c4edc1eda5" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Wed Nov 09 22:32:44 2005 +0000" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Wed Nov 09 22:32:44 2005 +0000" }, "message": "[DRIVER MODEL] Convert platform drivers to use struct platform_driver\n\nThis allows us to eliminate the casts in the drivers, and eventually\nremove the use of the device_driver function pointer methods for\nplatform device drivers.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\nAcked-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "d052d1beff706920e82c5d55006b08e256b5df09", "tree": "dac91b70361b405ab8e15207f514a2f3e991e93d", "parents": [ "8a212ab6b8a4ccc6f3c3d1beba5f92655c576404" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Sat Oct 29 19:07:23 2005 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Sat Oct 29 19:07:23 2005 +0100" }, "message": "Create platform_device.h to contain all the platform device details.\nConvert everyone who uses platform_bus_type to include\nlinux/platform_device.h.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\nAcked-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "6fbfddcb52d8d9fa2cd209f5ac2a1c87497d55b5", "tree": "c0414e89678fcef7ce3493e048d855bde781ae8d", "parents": [ "1a222bca26ca691e83be1b08f5e96ae96d0d8cae", "27d1097d39509494706eaa2620ef3b1e780a3224" ], "author": { "name": "Greg KH", "email": "greg@press.(none)", "time": "Fri Oct 28 10:13:16 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Oct 28 10:13:16 2005 -0700" }, "message": "Merge ../bleed-2.6\n" }, { "commit": "9480e307cd88ef09ec9294c7d97ebec18e6d2221", "tree": "967e26d3a23c24dd52b114d672312c207714308c", "parents": [ "a3a3395e487abc4c1371fe319a8ecbb3913a70a4" ], "author": { "name": "Russell King", "email": "rmk@arm.linux.org.uk", "time": "Fri Oct 28 09:52:56 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Oct 28 09:52:56 2005 -0700" }, "message": "[PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacks\n\nIn PM v1, all devices were called at SUSPEND_DISABLE level. Then\nall devices were called at SUSPEND_SAVE_STATE level, and finally\nSUSPEND_POWER_DOWN level. However, with PM v2, to maintain\ncompatibility for platform devices, I arranged for the PM v2\nsuspend/resume callbacks to call the old PM v1 suspend/resume\ncallbacks three times with each level in order so that existing\ndrivers continued to work.\n\nSince this is obsolete infrastructure which is no longer necessary,\nwe can remove it. Here\u0027s an (untested) patch to do exactly that.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "d9e29649875df82828167dd45c802d942db863ba", "tree": "8ce0d5d46bde4a92e212aabe18a3a86f508c8fd4", "parents": [ "80a18573cea2e6d8e95abe4d42bfc5f97761999a" ], "author": { "name": "Matt Reimer", "email": "mreimer@vpop.net", "time": "Fri Oct 28 16:25:02 2005 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Fri Oct 28 16:25:02 2005 +0100" }, "message": "[ARM] 3029/1: Add HWUART support for PXA 255/26x\n\nPatch from Matt Reimer\n\nAdds support for HWUART on PXA 255 / 26x. This patch originally came from\nhttp://svn.rungie.com/svn/gumstix-buildroot/trunk/sources/kernel-patches/000-gumstix-hwuart.patch\nand has been tweaked by me.\n\nSigned-off-by: Matt Reimer \u003cmreimer@vpop.net\u003e\nSigned-off-by: Nicolas Pitre \u003cnico@cam.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "e6158b4a5647624ceb90074bfcc248ea3152c906", "tree": "1f8da50d47f8d4b5dd27b06fa694fb48e38162bb", "parents": [ "6ec5e7f3656f0397b7e8b39a7dcc77937d187596" ], "author": { "name": "Lothar Wassmann", "email": "LW@KARO-electronics.de", "time": "Wed Oct 12 19:58:11 2005 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Wed Oct 12 19:58:11 2005 +0100" }, "message": "[ARM] 3002/1: Wrong parameter to uart_update_timeout() in drivers/serial/pxa.c\n\nPatch from Lothar Wassmann\n\nThe function serial_pxa_set_termios() is calling uart_update_timeout()\nwith the baud rate divisor as third parameter, while\nuart_update_timeout() expects the baud rate in this place.\nThis results in a bogus port-\u003etimeout which is proportional to the\nbaud rate.\n\nSigned-off-by: Lothar Wassmann \u003cLW@KARO-electronics.de\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "2d93486c6c110cf81db720359b4ec20de9c91450", "tree": "e87dd8ade5255d624e9e49d941d365f964bef07b", "parents": [ "d8ac10639b6a1ed900efbee38c18baaca31e64dc" ], "author": { "name": "Vincent Sanders", "email": "vince@kyllikki.org", "time": "Wed Sep 14 22:36:03 2005 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Wed Sep 14 22:36:03 2005 +0100" }, "message": "[ARM] 2907/1: GCC 4 serial driver compile fixes\n\nPatch from Vincent Sanders\n\nWhen building the ARM platforms several serial drivers fail to compile\nwith GCC 4.01 due to extern/static ambiguity.\n\nSigned-off-by: Vincent Sanders \u003cvince@arm.linux.org.uk\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "b129a8ccd53f74c43e4c83c8e0031a4990040830", "tree": "4c40afd836be87166d6d014380262f1baa19694f", "parents": [ "6b39374a27eb4be7e9d82145ae270ba02ea90dc8", "194d0710e1a7fe92dcf860ddd31fded8c3103b7a" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Wed Aug 31 10:12:14 2005 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Wed Aug 31 10:12:14 2005 +0100" }, "message": "[SERIAL] Clean up and fix tty transmission start/stoping\n\nThe start_tx and stop_tx methods were passed a flag to indicate\nwhether the start/stop was from the tty start/stop callbacks, and\nsome drivers used this flag to decide whether to ask the UART to\nimmediately stop transmission (where the UART supports such a\nfeature.)\n\nThere are other cases when we wish this to occur - when CTS is\nlowered, or if we change from soft to hard flow control and CTS\nis inactive. In these cases, this flag was false, and we would\nallow the transmitter to drain before stopping.\n\nThere is really only one case where we want to let the transmitter\ndrain before disabling, and that\u0027s when we run out of characters\nto send.\n\nHence, re-jig the start_tx and stop_tx methods to eliminate this\nflag, and introduce new functions for the special \"disable and\nallow transmitter to drain\" case.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "c5f4644e6c8ba21666128603e4e92544d3cd740d", "tree": "1a8b4c730ca575d4b1118af174b070764803fb2c", "parents": [ "a839688362e32f01608838516036697e30618b39" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Wed Jun 29 09:42:38 2005 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Wed Jun 29 09:42:38 2005 +0100" }, "message": "[PATCH] Serial: Adjust serial locking\n\nThis patch changes the way serial ports are locked when getting modem\nstatus. This change is necessary because we will need to atomically\nread the modem status and take action depending on the CTS status.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "0a8b80c52f44a6e84206618a8a450ba13a5809dc", "tree": "0ac9a71b3820e6d5876266aa50fa55abcfc5bf5d", "parents": [ "59a49e38711a146dc0bef4837c825b5422335460" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Fri Jun 24 19:48:22 2005 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Fri Jun 24 19:48:22 2005 +0100" }, "message": "[PATCH] Serial: Eliminate magic numbers\n\nUse the existing macros instead.\n\nSigned-off-by: Yoichi Yuasa \u003cyuasa@hh.iij4u.or.jp\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "05ab3014636ff60a319d37cdf37dca594b015eec", "tree": "d9d948a5ecd5e10cd511ebca328df2ef08d5e076", "parents": [ "88d7bd8cb9eb8d64bf7997600b0d64f7834047c5" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Mon May 09 23:21:59 2005 +0100" }, "committer": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Mon May 09 23:21:59 2005 +0100" }, "message": "[PATCH] Serial: Add uart_insert_char()\n\nAdd uart_insert_char(), which handles inserting characters into the\nflip buffer. This helper function handles the correct semantics\nfor handling overrun in addition to inserting normal characters.\n\nSigned-off-by: Russell King \u003crmk@arm.linux.org.uk\u003e\n" }, { "commit": "0370affeec3e751412e917aab931d8ba52680578", "tree": "da7698bc4130e252372d56b7e251453d1eccefe3", "parents": [ "a4ffad5b77f17bd8ad2a220d6eb0278bc07a5a17" ], "author": { "name": "Pavel Machek", "email": "pavel@ucw.cz", "time": "Sat Apr 16 15:25:35 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:25:35 2005 -0700" }, "message": "[PATCH] fix u32 vs. pm_message_t in drivers/\n\n-rc2-mm1 still contains few places where u32 and pm_message_t. This fixes\ndrivers/serial [should change no code].\n\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d", "parents": [], "author": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n" } ] }