)]}'
{
  "log": [
    {
      "commit": "75288c78c69020a574d93770c3a941b785f3d93d",
      "tree": "091bcfa5a507e5f1dd387980047854be448f415c",
      "parents": [
        "1965746bce49ddf001af52c7985e16343c768021"
      ],
      "author": {
        "name": "Vitaly Bordug",
        "email": "vbordug@ru.mvista.com",
        "time": "Fri Jan 20 22:22:34 2006 +0300"
      },
      "committer": {
        "name": "Paul Mackerras",
        "email": "paulus@samba.org",
        "time": "Fri Feb 10 16:52:46 2006 +1100"
      },
      "message": "[PATCH] ppc32: Make platform devices being able to assign functions\n\nImplemented by  modification of the .name field of the platform device,\nwhen PDs with the\nsame names are to be used within different drivers, as\n\u003cdevice_name\u003e -\u003e \u003cdevice_name\u003e:\u003cfunction\u003e\nCorresponding drivers should change the .name in struct device_driver to\nreflect upper of course.\n\nAdded ppc_sys_device_disable/enable function set, making it easier to\ndisable all the inexistent/not utilized platform device way pdevs. By the\ncheck of the \"disabled\" bit in the config field of ppc_sys_specs, disabled\nplatform devices will be either added/removed from the bus, or simply not\nregistered on it, depending on the time when disable/enable call asserted.\n\nThe default behaviour when nothing is disabled/enabled will be \"all devices\nare enabled\", which is the same as before.\n\nAlso helper platform_notify_map function added, making assignment of\nboard-specific platform_info more consistent and generic.\n\nSigned-off-by: Vitaly Bordug \u003cvbordug@ru.mvista.com\u003e\nSigned-off-by: Marcelo Tosatti \u003cmarcelo.tosatti@cyclades.com\u003e\nSigned-off-by: Paul Mackerras \u003cpaulus@samba.org\u003e\n"
    },
    {
      "commit": "a819f8ba76e81669fcc2665ac532cac650694b99",
      "tree": "3d87323f4f8187175b20f8e8966d3c8447161336",
      "parents": [
        "dad482c25698134b79c80694c81f0495019e0842"
      ],
      "author": {
        "name": "Kumar Gala",
        "email": "galak@gate.crashing.org",
        "time": "Fri Dec 09 11:57:44 2005 -0600"
      },
      "committer": {
        "name": "Paul Mackerras",
        "email": "paulus@samba.org",
        "time": "Mon Jan 09 14:53:08 2006 +1100"
      },
      "message": "[PATCH] ppc32: Add TQM85xx (8540/8541/8555/8560) board support\n\nThis patch adds support for the TQ Components TQM85xx modules. Currently the\nmodules TQM8540/8541/8555/8560 are supported.\n\nSigned-off-by: Stefan Roese \u003csr@denx.de\u003e\nSigned-off-by: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\nSigned-off-by: Paul Mackerras \u003cpaulus@samba.org\u003e\n"
    },
    {
      "commit": "4c8d3d997ef3c0594350fba716529905b314287e",
      "tree": "8439efcf2aa645a0e9bebd9e40d138c95d279671",
      "parents": [
        "c1986ee9bea3d880bcf0d3f1a31e055778f306c7"
      ],
      "author": {
        "name": "Kumar Gala",
        "email": "galak@gate.crashing.org",
        "time": "Sun Nov 13 16:06:30 2005 -0800"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Sun Nov 13 18:14:10 2005 -0800"
      },
      "message": "[PATCH] Update email address for Kumar\n\nChanged jobs and the Freescale address is no longer valid.\n\nSigned-off-by: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "b37665e0ba1d3f05697bfae249b09a2e9cc95132",
      "tree": "22c80609e3254524038d5b690f1f886b0987f58d",
      "parents": [
        "dd03d25fac90ee6f394874fb4e6995866304e4ba"
      ],
      "author": {
        "name": "Andy Fleming",
        "email": "afleming@freescale.com",
        "time": "Fri Oct 28 17:46:27 2005 -0700"
      },
      "committer": {
        "name": "Paul Mackerras",
        "email": "paulus@samba.org",
        "time": "Sat Oct 29 14:42:28 2005 +1000"
      },
      "message": "[PATCH] ppc32: 85xx PHY Platform Update\n\nThis patch updates the 85xx platform code to support the new PHY Layer.\n\nSigned-off-by: Andy Fleming \u003cafleming@freescale.com\u003e\nSigned-off-by: Kumar Gala \u003cKumar.gala@freescale.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Paul Mackerras \u003cpaulus@samba.org\u003e\n"
    },
    {
      "commit": "65145e060b1c933ebc4215c3b493f586e08a1d5c",
      "tree": "7468cf3075cbd10863886ac1bd3d0f08b25fec2d",
      "parents": [
        "eee4146ab908188e556641f1cd7a10e894d10edb"
      ],
      "author": {
        "name": "Kumar Gala",
        "email": "galak@freescale.com",
        "time": "Tue Jun 21 17:15:25 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Tue Jun 21 18:46:24 2005 -0700"
      },
      "message": "[PATCH] ppc32: Added support for all MPC8548 internal interrupts\n\nThe MPC8548 has 48 internal interrupts and 12 external interrupts.  The\nprevious generation PowerQUICC III devices only had 32 internal and 12\nexternal interrupts on the primary interrupt controller.\n\nExpanded the number of internal interrupts to 48 for all PowerQUICC III\nprocessors and moved the interrupt numbers for the external after the 48\ninternal interrupt lines, rather than putting the 12 new internal\ninterrupts at the end and ifdef\u0027ng the whole mess.  As parted of this\ncreated a macro which represents the internal interrupt senses since they\nare the same on all PQ3 processors.\n\nSigned-off-by: Kumar Gala \u003ckumar.gala@freescale.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "c91999bba3ae8b21d4a965f19bf127bac3e5f7f2",
      "tree": "47efc16ee86b909b2054b8be54d6727c9a6eec33",
      "parents": [
        "5b37b700f7c491a9320f4e29472bbaf23dded8fd"
      ],
      "author": {
        "name": "Kumar Gala",
        "email": "galak@freescale.com",
        "time": "Tue Jun 21 17:15:19 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Tue Jun 21 18:46:23 2005 -0700"
      },
      "message": "[PATCH] ppc32: Added preliminary support for the MPC8548 CDS board\n\nAdds support for using the MPC8548 processor on the CDS reference board.\nCurrently all the major busses (PCI, PCI-X, PCI-Express, sRIO) and eTSEC3\nand eTSEC4 are not supported.\n\nSigned-off-by: Kumar Gala \u003ckumar.gala@freescale.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "5b37b700f7c491a9320f4e29472bbaf23dded8fd",
      "tree": "e8a77c322bec5e75f0524c99f3be61645560b3c3",
      "parents": [
        "da3caa204ca40c32dcb751ebead2a6835b83e8d1"
      ],
      "author": {
        "name": "Kumar Gala",
        "email": "galak@freescale.com",
        "time": "Tue Jun 21 17:15:18 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Tue Jun 21 18:46:23 2005 -0700"
      },
      "message": "[PATCH] ppc32: Added support for new MPC8548 family of PowerQUICC III processors\n\nAdded descriptions of the new MPC8548 family processors, e500 core and\nperipherals.\n\nSigned-off-by: Kumar Gala \u003ckumar.gala@freescale.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
      "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d",
      "parents": [],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n"
    }
  ]
}
