)]}' { "log": [ { "commit": "b7f53dc2dac84df9754f46bb1249e4aed3ff46d5", "tree": "65c0f22bb502b327cef8a0528b5433ef6fc38542", "parents": [ "2d31d27a3a1810d6d55991f4daea3af5812e3d90" ], "author": { "name": "Pavankumar Kondeti", "email": "pkondeti@codeaurora.org", "time": "Tue Aug 23 12:40:33 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:16 2011 -0700" }, "message": "USB: gadget: Remove spoof disconnect workaround in ci13xxx_msm\n\nThe spoof disconnect workaround puts PHY in non-driving mode after\npull-up is disabled. Some times pull-up is not getting enabled when\nPHY is in non-driving mode. As this workaround is not applicable for\n28-nm PHY, remove it.\n\nCRs-Fixed: 302394\nSigned-off-by: Pavankumar Kondeti \u003cpkondeti@codeaurora.org\u003e\n" }, { "commit": "2d31d27a3a1810d6d55991f4daea3af5812e3d90", "tree": "dcfc457f8e40eae5258131fc26bcb78c2d5631da", "parents": [ "70dc7cfdae8ce23d7c6184add238319bf622270c" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Fri Aug 19 13:32:47 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:15 2011 -0700" }, "message": "msm: camera: Add new function to msm_camera_i2c\n\nAdd new function to handle device settings with varying data length.\nSensor vendors usually give us settings with consistent data length,\netc. group of byte or groups or word.\nThis new structure and function will handle cases when the data length\nchanges often.\n\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "70dc7cfdae8ce23d7c6184add238319bf622270c", "tree": "e3aece5cd1cc7da575355c7695440901cbbea26a", "parents": [ "eff783a019d02e8ffd7a730f6fdb037fcff32d32" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Mon Aug 22 19:08:42 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:15 2011 -0700" }, "message": "msm: socinfo: Add support for detecting Krait v1\n\nAdd a function to query whether the system is running on an\nearly sample of the Krait processor.\n\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "eff783a019d02e8ffd7a730f6fdb037fcff32d32", "tree": "5b81f8399d0cf0efe86280f781ec6876b5a02918", "parents": [ "f94bcc6852eae1a1623388b16833569c985e2998" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Mon Aug 22 19:01:58 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:14 2011 -0700" }, "message": "msm: socinfo: Move read_msm_cpu_type into socinfo.c\n\nSince socinfo.c is now built on all targets, it is safe to\nuninline this function and move it into socinfo.c.\nSomething this big should not be inlined, anyway.\n\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "f94bcc6852eae1a1623388b16833569c985e2998", "tree": "6359ca1cc7d2bc698d517bea38a1192fa9261cc1", "parents": [ "611d0d9e5b51f9e9906c956b619a91a35964210d" ], "author": { "name": "Ankit Premrajka", "email": "ankitp@codeaurora.org", "time": "Mon Aug 22 15:23:53 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:14 2011 -0700" }, "message": "msm: camera: add config identifier to control command structure.\n\nSigned-off-by: Ankit Premrajka \u003cankitp@codeaurora.org\u003e\n" }, { "commit": "611d0d9e5b51f9e9906c956b619a91a35964210d", "tree": "7e8d79f531ca1d77035625fe283515cc423f05e9", "parents": [ "d0c032ba6921da7a83b3d7356f5ee13ae3085c21" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Fri Aug 12 16:11:25 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:13 2011 -0700" }, "message": "msm: Add idle_stats_device infrastructure\n\nAdd a core infrastructure for transmitting idle stats to user\nspace for use by other devices in the system such as the GPU.\n\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "d0c032ba6921da7a83b3d7356f5ee13ae3085c21", "tree": "b2f80cad833f0885330892821eecabe20938b287", "parents": [ "ce65086d12f309762659c1684d94f0869727f725" ], "author": { "name": "Mona Hossain", "email": "mhossain@codeaurora.org", "time": "Mon Aug 22 08:46:39 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:12 2011 -0700" }, "message": "crypto: Fix memory allocated for ignoring data\n\nSigned-off-by: Mona Hossain \u003cmhossain@codeaurora.org\u003e\n" }, { "commit": "ce65086d12f309762659c1684d94f0869727f725", "tree": "77dc43de61dca616e3b75db1daef1b4b8a222967", "parents": [ "a00149c36cb1335c587eac6d110662bc2b2598d3" ], "author": { "name": "Shuzhen Wang", "email": "shuzhenw@codeaurora.org", "time": "Wed Aug 17 15:27:01 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:12 2011 -0700" }, "message": "camera: Export msm_isp.h to user space.\n\nThe header would hold command IDs and ISP message IDs,\nwhich can be used by user space code.\n\nSigned-off-by: Shuzhen Wang \u003cshuzhenw@codeaurora.org\u003e\n" }, { "commit": "a00149c36cb1335c587eac6d110662bc2b2598d3", "tree": "c7fa2d00cd201c622ceab1ca7d6532feeaf06f73", "parents": [ "a39d1d4a489a3a530727c0c2d1745c25e0426e71" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Thu Jul 21 18:43:26 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:11 2011 -0700" }, "message": "acpuclock-8960: Add initial support for the APQ8064\n\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "a39d1d4a489a3a530727c0c2d1745c25e0426e71", "tree": "e66944d60c81717c51a75f123498e83d851e6736", "parents": [ "e4763a14f1c49a4c0dd3bb6c9abd9f68d8d75184" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Fri Aug 19 13:54:34 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:10 2011 -0700" }, "message": "leds: pm8xxx: fix issues in pm8xxx_led_config\n\nLED mode set through pm8xxx_led_config API should be forced, not\nOR\u0027ed with the old value. For manual mode the brightness setting\nshould be done by LED trigger, not being turned on by default.\n\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\n" }, { "commit": "e4763a14f1c49a4c0dd3bb6c9abd9f68d8d75184", "tree": "ad096d5927ba1cf61c6428bd3f482d36df8e0770", "parents": [ "8676ba9056476fa648d965fd49fac80db451f42b" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Wed Aug 17 19:59:41 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:09 2011 -0700" }, "message": "arm: configs: Change fsm9xxx default timer\n\nDefault timer is changed from GP_TIMER to DG_TIMER\n\nAcked-by: Kaushik Sikdar \u003cksikdar@qualcomm.com\u003e\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "8676ba9056476fa648d965fd49fac80db451f42b", "tree": "ff6d792cf126889c2c09ed8a67d2680d2f23a95d", "parents": [ "572c3b4884dcb41ef6280d4d40c77b899487ef93" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Aug 17 10:41:28 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:09 2011 -0700" }, "message": "msm: irqs: increase the number of interrupts\n\nOn 8960 and 8064 targets, the version of gic used supports\na total of 288 interrupts (16 SGI 16 PPI and 256 SPI).\n\nFix the NR_MSM_IRQS to reflect this increase.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "572c3b4884dcb41ef6280d4d40c77b899487ef93", "tree": "080c3d705889ea18fb017ccefed4a9a1e099193f", "parents": [ "8ba5181216fac0de8e27795156178423dcab89d7" ], "author": { "name": "Bradley Rubin", "email": "brubin@codeaurora.org", "time": "Thu Jul 07 18:23:44 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:08 2011 -0700" }, "message": "ASoC: Create signed 8-bit volume control register\n\nALSA currently supports a 16-bit register which contains\ntwo 8-bit two\u0027s complement gain values.\n\nThis patch modifies the same callback functions as the\nabove register type to support an 8-bit two\u0027s complement\ngain register.\n\nSigned-off-by: Brad Rubin \u003cbrubin@codeaurora.org\u003e\n" }, { "commit": "8ba5181216fac0de8e27795156178423dcab89d7", "tree": "775cbed0d8168048bcdcc8c179a469997c39507a", "parents": [ "0b8dbd0db915e6d57dbcc7eca27bddd9253b94f6" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Wed Aug 03 22:30:27 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:08 2011 -0700" }, "message": "mfd: pm8921-adc: Fix kmemleak in probe\n\nRemove kmem allocation for adc channel list and use\nthe data through the platform data.\n\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "0b8dbd0db915e6d57dbcc7eca27bddd9253b94f6", "tree": "91aa36a4c53afdbed116a98aadb92fde584a8186", "parents": [ "e252237237dd9a482ea75a7fd29ebd443ec4eb35" ], "author": { "name": "Nagamalleswararao Ganji", "email": "nganji@codeaurora.org", "time": "Thu Aug 18 20:46:59 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:07 2011 -0700" }, "message": "msm: board8960: fix for 8960 mdp writeback hang issue\n\nset the correct size to the writeback buffer based on the\npanel size to fix the hung issue.\n\nSigned-off-by: Nagamalleswararao Ganji \u003cnganji@codeaurora.org\u003e\n" }, { "commit": "e252237237dd9a482ea75a7fd29ebd443ec4eb35", "tree": "0dfc68e9e1047ae7b82dcd8c102eff652fae6589", "parents": [ "688c66a4c2ba7134b68dc026621704397ea6fed4" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Aug 17 14:52:21 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:07 2011 -0700" }, "message": "msm: clock: Rename all UART clocks to \u0027core_clk\u0027 or \u0027iface_clk\u0027\n\nDrivers should now use their device names to distinguish between\nclocks of the same type rather than the clock name.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "688c66a4c2ba7134b68dc026621704397ea6fed4", "tree": "88e7ff701baa34dc4fb8467f5406f305984da569", "parents": [ "a7096d05fd1068494c999a01ed265b0afc070170" ], "author": { "name": "Bradley Rubin", "email": "brubin@codeaurora.org", "time": "Tue Aug 16 12:25:13 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:06 2011 -0700" }, "message": "ASoC: WCD9310: Read microphone voltage twice for button interrupts\n\nDoing two voltage readings when receiving a button press interrupt\nensures that a button was actually pressed. Sometimes a headset\ninsertion or removal can trigger a button press detection, and this\npatch makes sure that only true button presses cause button events\nto be passed up to user space.\n\nSigned-off-by: Brad Rubin \u003cbrubin@codeaurora.org\u003e\n" }, { "commit": "a7096d05fd1068494c999a01ed265b0afc070170", "tree": "6391d7bc92f02649ccbb10ae8f0c428f2bb47f44", "parents": [ "72a8b61b2287ef731e25903166f213ea33d8ff1f" ], "author": { "name": "Bradley Rubin", "email": "brubin@codeaurora.org", "time": "Wed Aug 03 18:29:02 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:05 2011 -0700" }, "message": "ASoC: WCD9310: Use new ANC firmware file format\n\nThe new ANC file format allows calibration for multiple\nheadsets to be present in the same file. The \"ANC Slot\"\ncontrol selects which slot in the file to use for\ncalibration.\n\nSigned-off-by: Brad Rubin \u003cbrubin@codeaurora.org\u003e\n" }, { "commit": "72a8b61b2287ef731e25903166f213ea33d8ff1f", "tree": "0199b6353ff04fe9c6027c4697fe8ae384c6d9be", "parents": [ "72029d6bca598b3f8af4f280ee06145caede049f" ], "author": { "name": "Rajesha Kini", "email": "rkini@codeaurora.org", "time": "Wed Aug 10 11:19:55 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:05 2011 -0700" }, "message": "audio: qdsp6v2: handle flush and eos in encoder driver\n\nUpdated encoder driver to handle the flush and eos.\n\nCRs-fixed: 283541\nSigned-off-by: Rajesha Kini \u003crkini@codeaurora.org\u003e\n" }, { "commit": "72029d6bca598b3f8af4f280ee06145caede049f", "tree": "f3ee45540457fb2d92fd8e85c9c92ec77f566b71", "parents": [ "7706e8ed9792c55922365d819a7a5fc22133cbbd" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Tue Aug 23 17:08:55 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:04 2011 -0700" }, "message": "msm_serial_hs_lite: Enable clocks when adding the port\n\nEnable the GSBI bus clock when calling uart_add_one_port in\nthe probe function to allow a clean transition from the\nearly console to the regular console. The TTY layer may try\nto configure the port before the early console became\ndeactivated, which will prematurely disable the clocks and\ncause a lockup.\n\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "7706e8ed9792c55922365d819a7a5fc22133cbbd", "tree": "f868da4d83254d19add7a6bdbb7c5fe93a4efaf3", "parents": [ "bc3d98de3054f783a721ae87803dc8f8ab89fcfa" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Tue Aug 16 11:46:44 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:04 2011 -0700" }, "message": "ASoC: msm8960: Add support for dsp FLUSH.\n\nThe LPA player needs to issue FLUSH to dsp while doing seek.\nThus EOS needs to be moved from trigger to close api as\nit needs to drop buffers to support seek after trigger stop.\n\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n" }, { "commit": "bc3d98de3054f783a721ae87803dc8f8ab89fcfa", "tree": "f60ddc80f83f5d07f90551ef91219bfedadf3b3d", "parents": [ "80d7cb6114798db737fd43f2e7ebec2c28bbf531" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Wed Aug 10 17:14:23 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:03 2011 -0700" }, "message": "msm: 8064: Enable irq, gpio, and mpp for pm8921\n\nAdd platform data for irq, gpio, and mpp\n\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "80d7cb6114798db737fd43f2e7ebec2c28bbf531", "tree": "a00600e9dbdca7b471cb095fc97f9c997607eca3", "parents": [ "4ef572eb7a9994a7cec512131fdc83c353b84219" ], "author": { "name": "pankaj kumar", "email": "pakuma@codeaurora.org", "time": "Tue Aug 23 13:37:55 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:03 2011 -0700" }, "message": "msm: devces-msm7x27a: Fix compilation while L2 PL310 is disabled\n\nRename msm_cache_init to msm7x27x_cache_init to fix\nthe compilation when L2 PL310 is disabled.\n\nSigned-off-by: pankaj kumar \u003cpakuma@codeaurora.org\u003e\n" }, { "commit": "4ef572eb7a9994a7cec512131fdc83c353b84219", "tree": "02a1ffe292d66dfc369697a6a2d1b717c8be26f7", "parents": [ "b5c67e8d08b41f508e2cee6d1e0db074ed740e08" ], "author": { "name": "Nagamalleswararao Ganji", "email": "nganji@codeaurora.org", "time": "Thu Aug 18 20:42:40 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:02 2011 -0700" }, "message": "defconfig: msm8960: mdp writeback for 8960\n\nenabling the mdp writeback mode for 8960\n\nSigned-off-by: Nagamalleswararao Ganji \u003cnganji@codeaurora.org\u003e\n" }, { "commit": "b5c67e8d08b41f508e2cee6d1e0db074ed740e08", "tree": "50ef673981e12b72106e023623defa9a517e9d70", "parents": [ "f5a4bbe4a0f1a8a300dd6651084fe0e74a592a74" ], "author": { "name": "Amy Maloche", "email": "amaloche@codeaurora.org", "time": "Thu Aug 18 16:39:35 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:01 2011 -0700" }, "message": "board: msm8660: add more delay for hw to stabilize\n\nCRs-fixed: 301474\nSigned-off-by: Amy Maloche \u003camaloche@codeaurora.org\u003e\n" }, { "commit": "f5a4bbe4a0f1a8a300dd6651084fe0e74a592a74", "tree": "c3e5bd1228cc6427c8635f9f6d5cffdae6ccc0d7", "parents": [ "3043fbaf3c938e70c6a5f587f86f6b653becc3c3" ], "author": { "name": "Zhang Chang Ken", "email": "kenz@codeaurora.org", "time": "Tue Jul 05 19:16:39 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:01 2011 -0700" }, "message": "input: cy8c_ts: Add support for TMA340 TS controller\n\nThis controller uses the same packet format as TMA300\n\nSigned-off-by: Zhang Chang Ken \u003ckenz@codeaurora.org\u003e\n" }, { "commit": "3043fbaf3c938e70c6a5f587f86f6b653becc3c3", "tree": "f3275eab9f245ee097ba59a08a2eab0b981632fb", "parents": [ "ed246a9a919a2b040104410e555417a009215d5b" ], "author": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Mon Aug 01 14:15:57 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:00 2011 -0700" }, "message": "ASoC: wcd9310: Enable platform-specific micbias configuration\n\nWCD9310 has four micbiases and each of them can be programmed to get its\npower source from one of 3 available cfilters. Each cfilter can be\nprogrammed to different voltage levels. Essentially, on WCD9310, a user\ncan have up to three different voltage levels to power various analog\nmicrophones and digital microphones. As it is now, micbias voltage level\nof WCD9310 is left to default value. Micbias and cfilter mapping is managed\nby codec driver. Different board design can have different micbias\narrangement. Micbias configuration of wcd9310 CODEC for 8960 CDP/MTP/FLUID\nis properly defined in this patch.\n\nSigned-off-by: Patrick Lai \u003cplai@codeaurora.org\u003e\n" }, { "commit": "ed246a9a919a2b040104410e555417a009215d5b", "tree": "0c293906a53ed915a2aa0e79f8fa6e40758313e2", "parents": [ "6862b140067f0059fd5e550e80d882f0dd5d7583" ], "author": { "name": "Kiran Kandi", "email": "kkandi@codeaurora.org", "time": "Fri Aug 12 14:03:44 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:00 2011 -0700" }, "message": "ASoC: WCD9310: Turn on Line3 and Line4 DAC\u0027s for speakers\n\nIn Tabla 1.0, negative signal from RX3(connected lineout1 DAC)\nand RX5(connected to lineout2 DAC) cannot be sent to lineout3\nand lineout4 DAC\u0027s respectively. For differential speakers to\nwork correctly, lineout3 and lineout4 DAC still need to be\nturned on even if no audio signal is sent to them.\n\nCRs-Fixed: 298454, 300113\nSigned-off-by: Kiran Kandi \u003ckkandi@codeaurora.org\u003e\n" }, { "commit": "6862b140067f0059fd5e550e80d882f0dd5d7583", "tree": "17d5f2f8c82aaf6b4d5c1c8db39498f69bc9aaea", "parents": [ "f353567a572d107667cd5703b5e2342a30415687" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Mon Aug 22 09:07:07 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:59 2011 -0700" }, "message": "msm: sdio: Handle graceful shutdown\n\nsdio_al is not notified of charm modem shutdown causing failures\nin channel communication. Similar to subsystem restart, register\nfor a shutdown notification and notify sdio_al clients. Register\nsdio_al device as a charm device and charm modem device as its\nparent.\n\nSigned-off-by: Venkat Gopalakrishnan \u003cvenkatg@codeaurora.org\u003e\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n" }, { "commit": "f353567a572d107667cd5703b5e2342a30415687", "tree": "3828016716ca827e705d0744a3f44beaf02706ec", "parents": [ "8605fcaa4fba772b1248f082795343c43c30cad7" ], "author": { "name": "Sujith Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Mon Aug 22 08:53:44 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:59 2011 -0700" }, "message": "board: msm7x27a: Configure SDC2 GPIOs (in sleep state) correctly\n\nSDC2 GPIOs have external pull up through VREG_S3 which is always on\nregulator. Configuring SDC2 GPIOs (CLK, CMD, DAT) as PULL_DOWN\nduring sleep (when wifi is disabled) cause leakage current. Fix this\nby configuring them as PULL_UP. This also ensures that the GPIOs\nfrom host side are always active high as per SDIO spec.\n\nSigned-off-by: Sujith Reddy Thumma \u003csthumma@codeaurora.org\u003e\n" }, { "commit": "8605fcaa4fba772b1248f082795343c43c30cad7", "tree": "bd1574376fa4f6ab17142408187c2a484626509a", "parents": [ "2e099a00c756d378529fa4014355f0e7573bf409" ], "author": { "name": "Sahitya Tummala", "email": "stummala@codeaurora.org", "time": "Mon Aug 22 15:39:19 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:58 2011 -0700" }, "message": "mmc: msm_sdcc: Fix issue with SDCC runtime suspend/resume framework\n\nBelow is the problematic scenario that this patch fixes -\n\nThe SDCC host is runtime suspended and the system suspend\nhas began. Before starting suspend of all devices, the usage\ncounter is incremented by power management framework. Now, MMC\nblock device is suspended as part of devices suspend but before\nsuspend of SDCC host, suspend is aborted because of some other\ndevice. In this case, resume is called for all suspended devices\nbut the counter is not yet decremented. So when MMC block resume\nis called and when it tries to resume the host, it fails. This is\nbecause the current msmsdcc_enable() code resumes only when device\nusage counter is 0. This code is now changed to use\npm_runtime_suspended() to determine when to resume the device.\n\nSigned-off-by: Sahitya Tummala \u003cstummala@codeaurora.org\u003e\n" }, { "commit": "2e099a00c756d378529fa4014355f0e7573bf409", "tree": "7d2f6e96a1b277f66659aa1e2c10292290e9fdac", "parents": [ "7fe62a3d10a22a50a9c82ace1bb7300f1f858e06" ], "author": { "name": "Anji jonnala", "email": "anjir@codeaurora.org", "time": "Fri Aug 19 12:48:01 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:57 2011 -0700" }, "message": "USB: EHCI: Unlink the pending async queue heads explicitly in ehci_stop\n\nIs is observed that ehci-\u003easync-\u003eqh_next ptr is not getting freed up\nwhich is causing crash in ehci_mem_cleanup function. As a temporary\nworkaround unlink the pending queue heads as a part of ehci_stop.\n\nCRs-fixed: 301134\n\nSigned-off-by: Anji jonnala \u003canjir@codeaurora.org\u003e\n" }, { "commit": "7fe62a3d10a22a50a9c82ace1bb7300f1f858e06", "tree": "e33a5d7c2135b57a9bee609a9fe0bd9e35d8956b", "parents": [ "1ea7d8a6ae90c41e0d57268096403f1827055b49" ], "author": { "name": "Suman Tatiraju", "email": "sumant@codeaurora.org", "time": "Thu Jul 14 16:40:37 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:57 2011 -0700" }, "message": "msm: kgsl: add gpu busy stats to sysfs\n\nSigned-off-by: Suman Tatiraju \u003csumant@codeaurora.org\u003e\n" }, { "commit": "1ea7d8a6ae90c41e0d57268096403f1827055b49", "tree": "228154c48134454cdeffb87dc0b717d6164fb916", "parents": [ "d880c704a91e2ad56514e5deee20dd194576cc0c" ], "author": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Thu Aug 18 15:06:00 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:56 2011 -0700" }, "message": "msm: 8660: Disable ghost touch detection for TMG240\n\nSigned-off-by: Mohan Pallaka \u003cmpallaka@codeaurora.org\u003e\n" }, { "commit": "d880c704a91e2ad56514e5deee20dd194576cc0c", "tree": "7368190634779440951e9aebcb2c3bbdd7efbda0", "parents": [ "9ad6d836808450be1e8284b67ff8f3ea33e6f09a" ], "author": { "name": "Ananda Kishore", "email": "kananda@codeaurora.org", "time": "Thu Jun 23 15:19:31 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:56 2011 -0700" }, "message": "vdec: 720p: deblocking filter enabled for Divx and XVID\n\nDefault deblocking filter is enabled for Divx 4,5,6 and XVID.\n\nSigned-off-by: Ananda Kishore \u003ckananda@codeaurora.org\u003e\n" }, { "commit": "9ad6d836808450be1e8284b67ff8f3ea33e6f09a", "tree": "93352f509d62926196496332fc61daec15262ec3", "parents": [ "bea4783bcd4a65f11a6c5c00995a04dcea72c002" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Fri Aug 19 11:58:42 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:55 2011 -0700" }, "message": "power: pm8921-charger: add POWER_SUPPLY_PROP_ONLINE for USB and AC\n\nAdd POWER_SUPPLY_PROP_ONLINE for non battery supply like USB and AC\nso that it can be used by power supply driver.\n\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\n" }, { "commit": "bea4783bcd4a65f11a6c5c00995a04dcea72c002", "tree": "4c7354b9c465eb6d45fd5cec6a5521bf1c4fec25", "parents": [ "45b351ce7507c8b1bf4838b91c248327bd63a652" ], "author": { "name": "Nagamalleswararao Ganji", "email": "nganji@codeaurora.org", "time": "Mon Aug 15 10:49:59 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:55 2011 -0700" }, "message": "msm-fb : display: foot switch control for the mdp driver\n\nadds the support for disable/enable the mdp foot switch at\nsuspend/resume boundaries\n\nSigned-off-by: Nagamalleswararao Ganji \u003cnganji@codeaurora.org\u003e\n" }, { "commit": "45b351ce7507c8b1bf4838b91c248327bd63a652", "tree": "73b4046323f44e23c1904c38b708e02acef46594", "parents": [ "fd7454aa876df21022521c8ee88608f1057ae514" ], "author": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Wed Jul 20 22:37:27 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:54 2011 -0700" }, "message": "msm: audio: qdsp6v2: Change config for RTAC\n\nChange config for real-time audio calibration (RTAC)\nsince it is used by both 8660 and 8960.\n\nSigned-off-by: Ben Romberger \u003cbromberg@codeaurora.org\u003e\n" }, { "commit": "fd7454aa876df21022521c8ee88608f1057ae514", "tree": "1555e46585584bd842a3742f9f61e1ff91fec621", "parents": [ "727225f609791168016d9d7facae7a2cfdfce4f4" ], "author": { "name": "Nagamalleswararao Ganji", "email": "nganji@codeaurora.org", "time": "Tue Aug 09 10:56:40 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:53 2011 -0700" }, "message": "msm: 8960: enabling the GDHS for 8960 display subsystem\n\nenables the GDHS support for display subsystem including the\nmdp and rotator\n\nSigned-off-by: Nagamalleswararao Ganji \u003cnganji@codeaurora.org\u003e\n" }, { "commit": "727225f609791168016d9d7facae7a2cfdfce4f4", "tree": "d8aa5f424cf78516b878a7d8c0c251d29dad9d43", "parents": [ "ce1315aabcedc29e64b6719cfc963064a1780b4c" ], "author": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Thu Aug 18 11:09:49 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:53 2011 -0700" }, "message": "input: cyttsp-i2c: Add support for disabling ghost touch detection\n\nAdd support to treat ghost touches as normal touches incase firmware\nreports all touches as ghost touches.\n\nSigned-off-by: Mohan Pallaka \u003cmpallaka@codeaurora.org\u003e\n" }, { "commit": "ce1315aabcedc29e64b6719cfc963064a1780b4c", "tree": "c19015932f86faa24b43196079a68930654b2d42", "parents": [ "3a8b8514533d94af2e9fcb4b215f968f07d14253" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Apr 21 15:25:55 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:52 2011 -0700" }, "message": "msm: iomap-8960: Add QFPROM base for TSENS\n\nAdd base address for QFPROM to access the calibration data.\n\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "3a8b8514533d94af2e9fcb4b215f968f07d14253", "tree": "6e3071ae4ea2038d53ab0044857a230c799e6a26", "parents": [ "fab9ae9d9b4034699734d416914da0efc8139b34" ], "author": { "name": "Zhang Chang Ken", "email": "kenz@codeaurora.org", "time": "Thu Aug 04 18:41:39 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:52 2011 -0700" }, "message": "msm:8060: lcdc nt35582 panel support\n\nSigned-off-by: Zhang Chang Ken \u003ckenz@codeaurora.org\u003e\n" }, { "commit": "fab9ae9d9b4034699734d416914da0efc8139b34", "tree": "7349585e07bee7e880535742ab2ef27ec6911551", "parents": [ "44d4d2799620ed14fa484275b47f09020f6b61ee" ], "author": { "name": "Peter Lohmann", "email": "plohmann@codeaurora.org", "time": "Fri Aug 05 16:51:10 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:51 2011 -0700" }, "message": "mfd: wcd9310: Give the slimbus slave time to report present.\n\nSigned-off-by: Peter Lohmann \u003cplohmann@codeaurora.org\u003e\n" }, { "commit": "44d4d2799620ed14fa484275b47f09020f6b61ee", "tree": "90cddea01e5a68cc8cc9814556e79c4db5cd238d", "parents": [ "ffdf530c311822ae5ef3a06f285357a4e4702724" ], "author": { "name": "Helen Zeng", "email": "xiaoyunz@codeaurora.org", "time": "Wed Aug 10 14:49:20 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:51 2011 -0700" }, "message": "AsoC: msm: qdsp6: Add widevoice support\n\nSigned-off-by: Helen Zeng \u003cxiaoyunz@codeaurora.org\u003e\n" }, { "commit": "ffdf530c311822ae5ef3a06f285357a4e4702724", "tree": "1c2cf0d1e79fdcfd481b2cccd5227380b8eb97fe", "parents": [ "6ea0dcbf34d85d025774e38223be8e6156cdf728" ], "author": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Wed Aug 17 20:54:34 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:50 2011 -0700" }, "message": "msm_serial_hs_lite: Correct AUTO RFR Level value\n\nMR1 register (AUTO_RFR_LEVEL) programming value is considered in\nWords for UARTDM Core, whereas it is considered in Bytes for UART\nCore. Currently MR1 register is programmed for AUTO_RFR_LEVEL value\nas 3/4 size of Rx FIFO size i.e. 48 Bytes. For UARTDM Core this\nvalue needs to configure into Words. Hence programme AUTO_RFR_LEVEL\nvalue using MR1 register as 12 instead of 48.\n\nSigned-off-by: Mayank Rana \u003cmrana@codeaurora.org\u003e\n" }, { "commit": "6ea0dcbf34d85d025774e38223be8e6156cdf728", "tree": "e39700c61196332387a2f5859dbc8a5586431685", "parents": [ "4e7ad227208e367009946032ac2924f7b085529c" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Aug 16 16:44:43 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:49 2011 -0700" }, "message": "msm: rpm-regulator: add a hack to make RPM vreg functions no-ops on 8064\n\nMake rpm_vreg_set_voltage and rpm_vreg_set_frequency no-ops for 8064.\nThis will allow the acpuclock driver on 8064 to call these functions\nbefore RPM support is present on 8064.\n\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "4e7ad227208e367009946032ac2924f7b085529c", "tree": "31c1a9ec4ea529ca4f6ba9eb47f47d16b567c506", "parents": [ "09e462d3eae64affd0a2954c13c3011825745602" ], "author": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Wed Aug 17 15:47:38 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:49 2011 -0700" }, "message": "msm: 8064: Add support for APQ8064 Rumi3\n\nAdd support for the APQ8064 Rumi3 machine type. Move the\ndmov device initialization out of the common set of devices\ninitialized for all board configurations, and make it\nspecific to the sim device, as it does not yet work on the\nRumi3 hardware.\n\nSigned-off-by: Joel King \u003cjoelking@codeaurora.org\u003e\n" }, { "commit": "09e462d3eae64affd0a2954c13c3011825745602", "tree": "c7a58a7e8ac1b026aca67b0d13c756bd02995d3d", "parents": [ "93510c420880fa801843e11ae7b6e6611fb05286" ], "author": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Tue Aug 09 15:24:37 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:48 2011 -0700" }, "message": "msm: audio: qdsp6v2: Increase audio PMEM size by 72K\n\nThis increase is needed to support sending calibration\nfor VOIP and to send Wideband voice calibration for all\nsupported networks.\n\nSigned-off-by: Ben Romberger \u003cbromberg@codeaurora.org\u003e\n" }, { "commit": "93510c420880fa801843e11ae7b6e6611fb05286", "tree": "162224e89e98477d0f12654215baeecc1018e5d1", "parents": [ "cf5f20e114ebbcd1609bcf880842e057c3566971" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Fri Aug 19 19:04:40 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:48 2011 -0700" }, "message": "msm: subsystem_fatal: Fix nested disable_irq calls\n\nIRQ enables/disables are nested, therefore n disables\nneed to be followed by n enables to truly enable\nan interrupt.\n\nCRs-Fixed: 299463\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "cf5f20e114ebbcd1609bcf880842e057c3566971", "tree": "263aceb7bdae10b8460d35432f9625e33a8cc5eb", "parents": [ "1316308eb30c2745c9b7a9b41017ceccc86315b5" ], "author": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Mon Aug 22 12:29:52 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:47 2011 -0700" }, "message": "diag: Poll SMD control channel for data after USB connects\n\nDIAG uses SMD control channels to transfer packet registration\ninformation from slave processors. While USB is disconnected, under\nsome scenarios, the SMD data might be left unread. Hence, when USB\ngets connected, a special effort has to be made to read any unread\ndata on SMD control channel. Also each time a registration information\nis stored in diag table, the SMD channel needs to be polled once more.\n\nSigned-off-by: Shalabh Jain \u003cshalabhj@codeaurora.org\u003e\n" }, { "commit": "1316308eb30c2745c9b7a9b41017ceccc86315b5", "tree": "83887b90039592ecde1dddcdf331291b619da8b4", "parents": [ "a7a1c6b3d50e8a1e658dda6f18949c521b72c9a4" ], "author": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Tue Aug 09 10:17:06 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:46 2011 -0700" }, "message": "msm_charger: Allow parameters to select default charger type\n\nAdded method to msm_charger to allow programming of max source\ncurrent. Created struct for platform data to be passed into\npmic8058_charger\n\nSigned-off-by: Terence Hampson \u003cthampson@codeaurora.org\u003e\n" }, { "commit": "a7a1c6b3d50e8a1e658dda6f18949c521b72c9a4", "tree": "5656c4e8c3248b3fa0e4eec67071b98ca731a365", "parents": [ "f0b51cd8ba6bb484a41f15abdbc6b0f71cf70fe2" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Aug 17 10:04:58 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:46 2011 -0700" }, "message": "power: pm8921-bms: fix division error\n\nArithmetic conversion rules states that a signed operand is converted\nto unsigned if the other operand is unsigned.\n\nThe voltage across vsense is a signed int and it can be negative.\nDividing it by the battery sense resistor, an unsigned int, was\nresulting in a very large positive number instead of a negative number.\n\nFix it by casting the battery sense resistor to signed so that a\na signed division is performed.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "f0b51cd8ba6bb484a41f15abdbc6b0f71cf70fe2", "tree": "411285a603ceee5a305a5969d3a0a5debe0702b6", "parents": [ "e258cf07bd95422f2b73c8c0cb183bd5b71942ee" ], "author": { "name": "Sachin Shah", "email": "sachins@codeaurora.org", "time": "Thu Aug 11 11:54:57 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:45 2011 -0700" }, "message": "tzcom: Turn some debug messages to error and warning\n\nSigned-off-by: Sachin Shah \u003csachins@codeaurora.org\u003e\n" }, { "commit": "e258cf07bd95422f2b73c8c0cb183bd5b71942ee", "tree": "48184ec6ac55bfac0f9635cccb727c9a7376107a", "parents": [ "dd7ef89bddd952ae751e2c74d5f7094c13e48f8e" ], "author": { "name": "Ankur Nandwani", "email": "ankurn@codeaurora.org", "time": "Fri Aug 19 10:16:38 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:45 2011 -0700" }, "message": "msm: 8960: Add the WCNSS restart module for 8960\n\nThis driver monitors WCNSS hardware watchdog interrupt line,\nand it plugs WCNSS into Subsytem restart framework.\n\nAcked-by: Sameer Thalappil\u003csameert@qca.qualcomm.com\u003e\nSigned-off-by: Ankur Nandwani \u003cankurn@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/configs/msm8960_defconfig\n" }, { "commit": "dd7ef89bddd952ae751e2c74d5f7094c13e48f8e", "tree": "81ee34094e5825c6643f84db725922eb9d9ba4d4", "parents": [ "211df573e1123bf8c8a9ac227d1bcc4ce6d88219" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Thu Aug 18 16:49:57 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:44 2011 -0700" }, "message": "Revert \"msm: 8960: remove always ON vote for eMMC VCC rail\"\n\nThis reverts commit 117c3e3e5a1f802f1916e38f6c122d1fa628bc89.\n\nAs above mentioned commit is creating problem for PBL (Primary\nbootloader) to detect the eMMC after the MSM reset (caused by\nwatchdog bite). So reverting this change.\n\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "211df573e1123bf8c8a9ac227d1bcc4ce6d88219", "tree": "5e1ec5d1db1e27f39d16badedc245efa9d7b652c", "parents": [ "5d2d1e6bc117a82483fef555259f6faeb2999a92" ], "author": { "name": "Zhang Chang Ken", "email": "kenz@codeaurora.org", "time": "Tue Jul 05 19:16:39 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:44 2011 -0700" }, "message": "msm: 8060: Add pdata information for TMA340 TS on dragonboard\n\nAdd TS and virtual key configuration for dragonboard\n\nSigned-off-by: Zhang Chang Ken \u003ckenz@codeaurora.org\u003e\n" }, { "commit": "5d2d1e6bc117a82483fef555259f6faeb2999a92", "tree": "361665030026847e32a89693e4fcaa2c4eb429a0", "parents": [ "7b1ebd2a85f2b0e9730f0c9db6af17a04c01c430" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Wed Aug 10 16:27:35 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:43 2011 -0700" }, "message": "msm: charm: Configure A1 clock for pin mode\n\nBefore the external modem images are loaded, the A1 PMIC clock\nneeds to be configured in Pin Control mode. Otherwise, there\ncould be a race where the external modem has not been\nconfigured which could prevent bootup.\n\nCRs-Fixed: 297181\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "7b1ebd2a85f2b0e9730f0c9db6af17a04c01c430", "tree": "775e086a4ad80149708aef6b1c652f2e72a0ed3f", "parents": [ "ffd47d3c67922f83af7e7f99e50be83d432b6afb" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Sat Aug 20 20:53:24 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:42 2011 -0700" }, "message": "msm: sdio: Add LPM messages for sporadic wakeup issues analysis\n\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n" }, { "commit": "ffd47d3c67922f83af7e7f99e50be83d432b6afb", "tree": "f4c908da8e5f4dbc8e55a82d56be3e648c31e472", "parents": [ "a3c1a12a6ae1cd16b9105417954b0128df1ead97" ], "author": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Tue Aug 09 19:30:25 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:42 2011 -0700" }, "message": "msm: audio: qdsp6v2: Enable RTAC for 8660 \u0026 8960\n\nEnabled real-time audio calibration (RTAC) for both\n8660 and 8960.\n\nSigned-off-by: Ben Romberger \u003cbromberg@codeaurora.org\u003e\n" }, { "commit": "a3c1a12a6ae1cd16b9105417954b0128df1ead97", "tree": "2c0ee58cc3eda5531a7836c0fc0153bd2a8f06d1", "parents": [ "1d9207484a3ec4e0c344399235a1dead45c389fe" ], "author": { "name": "Shuzhen Wang", "email": "shuzhenw@codeaurora.org", "time": "Thu Aug 04 15:33:27 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:41 2011 -0700" }, "message": "camera: v4l2: Make ISPIF a v4l2 subdev.\n\nThis makes it easier to control stream on/off using ISPIF\ninstead of CAMIF. RDI streaming/snapshot also becomes a\npossibility.\n\nNote that this change still turns on PIX0 streaming right\nafter ISPIF configuration. This is because ISPIF streamon\nneeds to happen before sensor streamon, and right now sensor\nstream is turned on before configuring VFE pipeline.\n\nSigned-off-by: Shuzhen Wang \u003cshuzhenw@codeaurora.org\u003e\n" }, { "commit": "1d9207484a3ec4e0c344399235a1dead45c389fe", "tree": "f4625ad0d2e9196eecc1479ad51167f35d95f789", "parents": [ "9b92ccd290b28ea69b6f5447813b750c99c5f793" ], "author": { "name": "Prabhanjan Kandula", "email": "pkandula@codeaurora.org", "time": "Fri Aug 19 10:28:11 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:41 2011 -0700" }, "message": "board-msm7x27a: Reduce pmem reclaimed from encoder.\n\nSigned-off-by: Prabhanjan Kandula \u003cpkandula@codeaurora.org\u003e\n" }, { "commit": "9b92ccd290b28ea69b6f5447813b750c99c5f793", "tree": "9b49766154c177adecee993b2b386e1d87a50d08", "parents": [ "24a06d05adbf9470a4d00589ee7acc936ac5a5e3" ], "author": { "name": "Tarun Karra", "email": "tkarra@codeaurora.org", "time": "Fri Aug 19 10:59:57 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:40 2011 -0700" }, "message": "msm: kgsl: Changed variable type from unsigned int to long\n\nChanged variable \"result\" type from unsigned int to long\nto accurately reflect the result of macro wait_event_interruptible_timeout\n\nSigned-off-by: Tarun Karra \u003ctkarra@codeaurora.org\u003e\n" }, { "commit": "24a06d05adbf9470a4d00589ee7acc936ac5a5e3", "tree": "4d08e787c17c019ba2adc6cbe91504fe8277b439", "parents": [ "94625efab92f24725b9ea5082a4520f02395c58d" ], "author": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Tue Aug 02 12:04:09 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:40 2011 -0700" }, "message": "defconfig: Enable MSM_SLEEP_STATS for MSM8960\n\nSigned-off-by: Praveen Chidambaram \u003cpchidamb@codeaurora.org\u003e\n" }, { "commit": "94625efab92f24725b9ea5082a4520f02395c58d", "tree": "6d5c131a6075539982d2af51c304b7a1128a99e0", "parents": [ "d90ea0e597f3e9563983981c42ee49106f7cf6c6" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Tue Jul 12 17:06:01 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:39 2011 -0700" }, "message": "msm: clock-8960: Support v2 clocks\n\nSome new clocks (and a PLL) have been added in v2. Support the\nusb_hsic clocks and csi2 clocks.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "d90ea0e597f3e9563983981c42ee49106f7cf6c6", "tree": "4a279463c0817fe16e434f2ecab1582b70b33ee0", "parents": [ "6a8057c009fd3165fd989c884942b6f5e9bfc7ff" ], "author": { "name": "Mona Hossain", "email": "mhossain@codeaurora.org", "time": "Thu Aug 11 16:51:07 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:38 2011 -0700" }, "message": "crypto: Add support for 32KB+ packets in QCE\n\nSigned-off-by: Mona Hossain \u003cmhossain@codeaurora.org\u003e\n" }, { "commit": "6a8057c009fd3165fd989c884942b6f5e9bfc7ff", "tree": "9dd48f1747ba6da15c9bce7063d3596d854396c6", "parents": [ "8c78b13c9717032a60d9f8e8f35c8d729709da9a" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Tue Aug 16 13:47:12 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:38 2011 -0700" }, "message": "msm: smsm: add apps\u003c-\u003edsps smsm support\n\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n" }, { "commit": "8c78b13c9717032a60d9f8e8f35c8d729709da9a", "tree": "f9659dc2f3f81a1603e83ffadc80a68a4988f23a", "parents": [ "e96f66dd6b37316487cbc350ff55b3c9ad722248" ], "author": { "name": "Jordan Crouse", "email": "jcrouse@codeaurora.org", "time": "Thu May 26 10:27:47 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:37 2011 -0700" }, "message": "lib: Add debugfs file for tracking memory allocations\n\nAdd caller information to memory allocation calls and\ncreate /sys/kernel/debug/mempool/map to show the current set of\nallocations across all memory pools.\n\nSigned-off-by: Jordan Crouse \u003cjcrouse@codeaurora.org\u003e\n" }, { "commit": "e96f66dd6b37316487cbc350ff55b3c9ad722248", "tree": "57cd43d240c7c477815b24bf855330e5d758e75e", "parents": [ "270813aace6f99b5d6b3515b581a0c40ffee771f" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Thu Aug 11 14:06:38 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:37 2011 -0700" }, "message": "board: 8960: Enable deep sleep support for cypress TS\n\nCRs-Fixed: 300719\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "270813aace6f99b5d6b3515b581a0c40ffee771f", "tree": "12a39b2b1f540ae20452261b33395060950afec1", "parents": [ "feee40a7d6e6f8ce0c3e84d0b50ef562206ccfa1" ], "author": { "name": "Mingcheng Zhu", "email": "mingchen@codeaurora.org", "time": "Wed Aug 10 17:23:18 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:36 2011 -0700" }, "message": "msm: code clean up of the existing improper event implementation\n\nCurrent implementation has a bug in v4l2 event subscription.\n\nAlso it is good to make the kernel to be transparent\nto those notification events from daemon to HAL.\n\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "feee40a7d6e6f8ce0c3e84d0b50ef562206ccfa1", "tree": "1d010a612933cd30754f2a6b82042e3dba234def", "parents": [ "a691a954323ea381b223e28659853bcba3a04394" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Wed Aug 17 00:57:42 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:36 2011 -0700" }, "message": "msm: camera: Camera i2c utility file\n\nMoved i2c utility functions to msm_camera_i2c files from\nmsm_sensor file, so that it can be used by other camera sub device\ne.g. flash and actuators\n\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "a691a954323ea381b223e28659853bcba3a04394", "tree": "f0da1a96802d675fd07e7da4946cc573ac5c8312", "parents": [ "57ac1aca782870d66d79e82fe23c0bb6f19eca07" ], "author": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Thu Aug 18 10:58:04 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:35 2011 -0700" }, "message": "msm: rpm_resources: Refactor VDD values into target specific files\n\nRefactor VDD_dig and VDD_mem values for MSM8660 and MSM8960 targets.\n\nSigned-off-by: Praveen Chidambaram \u003cpchidamb@codeaurora.org\u003e\n" }, { "commit": "57ac1aca782870d66d79e82fe23c0bb6f19eca07", "tree": "eef864ec9f67a93b2a318d796c33679ee7beb7dc", "parents": [ "b479f0fe04493d8ee0d6b293df3f6c82c25751f5" ], "author": { "name": "Sagar Dharia", "email": "sdharia@codeaurora.org", "time": "Sat Aug 06 15:12:44 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:34 2011 -0700" }, "message": "qup_i2c: Make sure QUP core is in RESET before disabling clocks\n\nIf dynamic HW gating is enabled, it\u0027s required to have the QUP core\nin RESET state before HW gating can take effect.\n\nSigned-off-by: Sagar Dharia \u003csdharia@codeaurora.org\u003e\n" }, { "commit": "b479f0fe04493d8ee0d6b293df3f6c82c25751f5", "tree": "3da937fd7e597096435a296b16029e31d1ace65c", "parents": [ "9cb21753fdb41af317438d177e28a5071b8a15dc" ], "author": { "name": "Santosh Sajjan", "email": "ssajjan@codeaurora.org", "time": "Thu Aug 18 21:00:44 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:34 2011 -0700" }, "message": "board-msm7x27a:wlan: Updates to AR6003 PM device registration.\n\nAR6003 chip should be powered on before SDC2 resume is called in\nsuspend/resume scenarios for that registering AR6003 PM device before SDC2\nensures that power management framework always calls ar6000pm resume before\nSDC2 resume as the suspend/resume calls are serialized\n\nSigned-off-by: Santosh Sajjan \u003cssajjan@codeaurora.org\u003e\n" }, { "commit": "9cb21753fdb41af317438d177e28a5071b8a15dc", "tree": "e488cf2007afcc10ff1fc4b812bca1d4fc331931", "parents": [ "d5315bd98102b8a2f8e36bbd69b15b679dc43e84" ], "author": { "name": "Pavankumar Kondeti", "email": "pkondeti@codeaurora.org", "time": "Mon Aug 08 16:14:53 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:33 2011 -0700" }, "message": "USB: msm_gadget: Implement timer based solution to check priming status\n\nEndpoint is not getting primed some times though dQH is setup properly.\nThe current code waits in a busy loop to determine if re-priming is\nrequired. This leads to high CPU usage. As the occurrence of this issue\nis very rare, use a timer to determine if priming is required. The timer\nis deleted whenever a dTD on that endpoint is retired. So the timer\nhardly expires. Add a debugfs file to show how many times prime failure\nhappened.\n\nCRs-Fixed: 298265\nSigned-off-by: Pavankumar Kondeti \u003cpkondeti@codeaurora.org\u003e\n" }, { "commit": "d5315bd98102b8a2f8e36bbd69b15b679dc43e84", "tree": "a31236d45297acd0a762e759f1b0ee6a94c2d4bc", "parents": [ "44cbeb74acde740965c4e7e38ccecc0d5a66a12f" ], "author": { "name": "Abhishek Kharbanda", "email": "akharban@codeaurora.org", "time": "Wed Aug 10 19:45:53 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:33 2011 -0700" }, "message": "msm_fb: [HDMI_COMPLIANCE] Enable Audio for HDMI Compliance\n\nEnable Audio event for NON-HDCP builds required for HDMI Compliance\nCases.\n\nSigned-off-by: Abhishek Kharbanda \u003cakharban@codeaurora.org\u003e\n" }, { "commit": "44cbeb74acde740965c4e7e38ccecc0d5a66a12f", "tree": "e8479b42b1110e774eb18818c2202d3bc4913757", "parents": [ "28e99c8edbad0d0305381deb1574750e30a1a770" ], "author": { "name": "Tarun Karra", "email": "tkarra@codeaurora.org", "time": "Thu Aug 18 13:30:24 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:32 2011 -0700" }, "message": "msm: kgsl: changed strncat to strlcat\n\nChanged strncat to strlcat to pervent buffer overflow.\n\nSigned-off-by: Tarun Karra \u003ctkarra@codeaurora.org\u003e\n" }, { "commit": "28e99c8edbad0d0305381deb1574750e30a1a770", "tree": "94e175b06556900aafbbe87b07e7c6e91ab5a307", "parents": [ "13b74aba08719655281a769c12484df706e33d5d" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Thu Aug 18 17:23:10 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:32 2011 -0700" }, "message": "msm: kgsl: Use the first command to initiate busy\n\nThere may be multiple command submissions per-frame. Start your\nbusy count only on the first one.\n\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "13b74aba08719655281a769c12484df706e33d5d", "tree": "4c785d8ba0c77885c19e93a6297f72f46f192c95", "parents": [ "fce8f51282e790df40810ad71af4e5c53255c025" ], "author": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Mon Jul 18 17:36:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:31 2011 -0700" }, "message": "ASoc: msm: qdsp6:Add RTAC support in 8960 voice driver\n\nThis adds real-time audio calibration (RTAC) support\nfor the 8960 voice driver.\n\nSigned-off-by: Ben Romberger \u003cbromberg@codeaurora.org\u003e\n" }, { "commit": "fce8f51282e790df40810ad71af4e5c53255c025", "tree": "c2a2ca10aede91d44a282aa2ffc53375452d08b3", "parents": [ "5e9346c656de26cadb3cc1753bb27c06fb5ef93b" ], "author": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Mon Jul 18 16:46:09 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:30 2011 -0700" }, "message": "msm: audio: qdsp6v2: Removed ifdef\u0027s from RTAC code\n\nWhen real-time audio calibration (RTAC) is used a separate\nset of void functions defined in the header file is used.\nAll ifdef references for RTAC were removed from all other\nfiles.\n\nSigned-off-by: Ben Romberger \u003cbromberg@codeaurora.org\u003e\n" }, { "commit": "5e9346c656de26cadb3cc1753bb27c06fb5ef93b", "tree": "f6c40396bebf5ffab27f7cb3e2f95549be1a52ac", "parents": [ "cb12a106907ddd8c473f911ef3111c964d197738" ], "author": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Tue Aug 16 14:09:18 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:30 2011 -0700" }, "message": "usb: gsmd: Add support for SMD close event\n\nSMD can generate close event when modem sub-system restart. Clean\nUSB buffers and drop the carrier detect during smd close.\n\nSigned-off-by: Vamsi Krishna \u003cvskrishn@codeaurora.org\u003e\n" }, { "commit": "cb12a106907ddd8c473f911ef3111c964d197738", "tree": "7dceea9aaaa2df91f15589eee5ac380ebb924aef", "parents": [ "e606a7b1e106868b786df0b912b1fda9e2d5084a" ], "author": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Wed Aug 17 15:18:26 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:29 2011 -0700" }, "message": "msm: smd: Add smd_tiocmset api without spinlocks\n\ntiocmset can be called from client drivers in smd callbacks which\ncould result in dead-lock as most of the call-backs holds spinlock\nwhich is used by tiocmset. Add tiocmset call which does not use\nspinlocks so that it can be used from smd callbacks.\n\nSigned-off-by: Vamsi Krishna \u003cvskrishn@codeaurora.org\u003e\n" }, { "commit": "e606a7b1e106868b786df0b912b1fda9e2d5084a", "tree": "f6bf6a77462d0427977c60d2e85b08ee9ef6bd33", "parents": [ "e52976fc8742c1734c3fda80735d0dfd21c61826" ], "author": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Thu Aug 18 12:21:44 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:29 2011 -0700" }, "message": "usb: diag: Add NULL pointer check after ep_autoconfig\n\nep_autoconfig api can fail and return null endpoint. Add a\nnull pointer check after ep_auotconfig\n\nSigned-off-by: Vamsi Krishna \u003cvskrishn@codeaurora.org\u003e\n" }, { "commit": "e52976fc8742c1734c3fda80735d0dfd21c61826", "tree": "b0b433e320339a40f65e27d2c208b3c9dc682b31", "parents": [ "26f0556795a7018dbb794e4901b12949b4f2e66e" ], "author": { "name": "kuogee hsieh", "email": "khsieh@codeaurora.org", "time": "Fri Aug 12 15:32:52 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:28 2011 -0700" }, "message": "msm_fb: display: use mutex instead of spin lock to avoid deadlock\n\nThere has deadlock between mdp4_isr() and disable_irq() called by\nLCDC thread. Disable_irq() will wait for mdp4_isr() to complete\nbefore return. Meanwhile mdp4_isr() will try to acquire mdp_spin_lock\nwhich had been acquired by lcdc thread before call disable_irq().\nThis patch replace spin lock with mutex to avoid deadlock from happening.\n\nCRs-fixed: 301276\nSigned-off-by: kuogee hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "26f0556795a7018dbb794e4901b12949b4f2e66e", "tree": "cc4ff700ac0af37e1e67b3e6642d4df8cb3f4dae", "parents": [ "ef391acc67018666527ff306574cc56f6d103481" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Mon Jun 20 09:56:28 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:28 2011 -0700" }, "message": "msm: board-msm8960: switch to RPM control for most regulators\n\nSwitch control of most regulators from the pm8921-regulator\ndriver to the rpm-regulator driver. pm8921-regulator will still\nbe used for USB_OTG and HDMI_MVS. pm8921-regulator will also\nremain in use for LDO 26, 27, 28, and 29 because these are not\nhandled by the RPM. saw-regulator will continue to be used for\n8921_s5 and 8921_s6 (Krait rail supplies).\n\nAlso un-stub functions rpm_vreg_set_voltage and\nrpm_vreg_set_frequency now that they can safely be called.\n\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "ef391acc67018666527ff306574cc56f6d103481", "tree": "4150de38564a6e856c581bbfb97812033746647f", "parents": [ "48aef6d5c2dbe622a0c44440809f4860ff7a5770" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Mon Aug 15 20:27:33 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:27 2011 -0700" }, "message": "msm: rotator: Don\u0027t control rot_axi_clk explicitly\n\nIt is now controlled implicitly along with the rotator core clock\nfor all SoCs.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "48aef6d5c2dbe622a0c44440809f4860ff7a5770", "tree": "a83d9ceeecb0613f6bee2431dc63016cb7e8cd40", "parents": [ "65ac922f58e3542edbc9c797a033d98e40891054" ], "author": { "name": "Pradeep Jilagam", "email": "pjilagam@codeaurora.org", "time": "Thu Aug 18 18:58:50 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:26 2011 -0700" }, "message": "msm_fb: display: Vote for AXI Clock for DSI on 7x27A\n\nVote for a minimum rate of 65 MHz for AXI Clock while using\nDSI interface on 7x27A\n\nSigned-off-by: Pradeep Jilagam \u003cpjilagam@codeaurora.org\u003e\n" }, { "commit": "65ac922f58e3542edbc9c797a033d98e40891054", "tree": "0a45c440e82e945a921b053cbbe397e26e9728cc", "parents": [ "a8482a3ba5fc88429e38acd11280c49cd55dfa87" ], "author": { "name": "Konstantin Dorfman", "email": "kdorfman@codeaurora.org", "time": "Thu Aug 18 16:30:17 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:26 2011 -0700" }, "message": "msm: sdio: Unit test for sdio close feature.\n\n- no sdio_close() for stream channels\n- test 27: host sender with open/close Diag, CIQ and RPC\n- test 28: close channel \u0026 LPM Test (Host wakes the Client)\n\nSigned-off-by: Konstantin Dorfman \u003ckdorfman@codeaurora.org\u003e\n" }, { "commit": "a8482a3ba5fc88429e38acd11280c49cd55dfa87", "tree": "72fe55daa58e6c6da097edfacd47d6e230c892e1", "parents": [ "f1071c0d57dc5e17b6121838e1f5ce8e49104293" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Mon Aug 08 11:01:44 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:25 2011 -0700" }, "message": "Revert \"msm: 8x60: remove always ON vote for eMMC VCC rail\"\n\nThis reverts commit da97f3430c5ae4d2c84b2e4c388d53818cbfa7ac.\n\nAs above mentioned commit is creating problem for PBL (Primary\nbootloader) to detect the eMMC after the MSM reset (caused by\nwatchdog bite). So let\u0027s revert this change.\n\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "f1071c0d57dc5e17b6121838e1f5ce8e49104293", "tree": "deb3d3ed15cb3cfb05176cb422abc3c3fa4cc9aa", "parents": [ "253ce1292f5383a8202ba219de8093681f830aa6" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Aug 09 19:39:36 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:25 2011 -0700" }, "message": "input: atmel-mxt-ts: Make USERDATA as writable object\n\nThe USERDATA object can be used to store user specific\ndata such as version info.\n\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "253ce1292f5383a8202ba219de8093681f830aa6", "tree": "1541ae6182b8167ab5f8414ce109760a34f5647c", "parents": [ "a498e4d8256962b431843504f5df288509be5f20" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Aug 09 19:32:57 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:24 2011 -0700" }, "message": "input: atmel-mxt-ts: Add earlysuspend support\n\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "a498e4d8256962b431843504f5df288509be5f20", "tree": "d58e20f2693683618c6a05ee516d5dfe7419305c", "parents": [ "d7b05e5bab087bac1b384623e2a4669b3c475424" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Aug 09 19:10:12 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:24 2011 -0700" }, "message": "input: atmel-mxt-ts: Add regulator support and init. callbacks\n\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "d7b05e5bab087bac1b384623e2a4669b3c475424", "tree": "ec18658d5b83c32647455a7e4f4ece665e69f62f", "parents": [ "c23eee9c2d7b7a0234810d2a6a4912fa8951ad7b" ], "author": { "name": "Trilok Soni", "email": "tsoni@codeaurora.org", "time": "Wed Aug 17 18:09:08 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:23 2011 -0700" }, "message": "msm: acpuclock-7201: Add cpufreq table for 7x27aa 1GHz CDMA variant\n\nCRs-Fixed: 302123\nSigned-off-by: Trilok Soni \u003ctsoni@codeaurora.org\u003e\n" }, { "commit": "c23eee9c2d7b7a0234810d2a6a4912fa8951ad7b", "tree": "1698f748028a2a8bb7ac5c89984417fc7fd6ff40", "parents": [ "4ab97a9943c6eede62a4c62aedeac3ebbcc093d3" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Tue Aug 16 23:06:52 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:22 2011 -0700" }, "message": "msm: clock-8960: Rename csi0_pclk and csi0_vfe_clk\n\nThese clocks go to both CSI0 and CSI1. Update the naming in the\nclock driver to reflect this and their hardware names.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "4ab97a9943c6eede62a4c62aedeac3ebbcc093d3", "tree": "88d1cc8a67308431111c722b9d14a8b15fa67db3", "parents": [ "974a40d3c133b78db7e99404873336638f3f17b0" ], "author": { "name": "Lakshmi Narayana Kalavala", "email": "lkalaval@codeaurora.org", "time": "Tue Jul 26 15:30:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:22 2011 -0700" }, "message": "msm: camera: Include Minimum Luma in Stats buffer\n\nInclude Minimum Luma Pixel value in Stats buffer\nfor AWB stats process.\n\nSigned-off-by: Lakshmi Narayana Kalavala \u003clkalaval@codeaurora.org\u003e\n" }, { "commit": "974a40d3c133b78db7e99404873336638f3f17b0", "tree": "e1bb4a8bc5734a49fff53ed431724c12bc80a726", "parents": [ "d2e2c49df21f0925749844fd6638b6317cd0ca12" ], "author": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Mon Jul 18 15:08:21 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:21 2011 -0700" }, "message": "msm: audio: qdsp6v2: Change RTAC to use topology\n\nThis changes real-time audio calibration (RTAC) to use\ntopology ID\u0027s instead of device ID\u0027s.\n\nSigned-off-by: Ben Romberger \u003cbromberg@codeaurora.org\u003e\n" }, { "commit": "d2e2c49df21f0925749844fd6638b6317cd0ca12", "tree": "8698c155a7601816f50d7e86be1efc874956a313", "parents": [ "12f942b980e748222d8a988f8b8f061750656fc2" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Wed Jul 27 14:15:06 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:21 2011 -0700" }, "message": "msm: rmnet: reschedule read tasklet in low memory conditions\n\nIf the read tasklet is unable to allocate a skb due to low memory\nconditions, reschedule the tasklet to retry at some point in the future.\n\nCRs-Fixed: 295596\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n" }, { "commit": "12f942b980e748222d8a988f8b8f061750656fc2", "tree": "2c2df9b70ba10193078db471b4dbbd70fd3fee9b", "parents": [ "ee2e3089ff38457eac4ecd3c37b9ce7f82867fb7" ], "author": { "name": "Patrick Cain", "email": "pcain@codeaurora.org", "time": "Mon Aug 15 13:37:06 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:20 2011 -0700" }, "message": "defconfig: msm8960: Disable DCC_TTY\n\nThe DCC TTY console is waking up krait every 20ms causing degraded power.\n\nSigned-off-by: Patrick Cain \u003cpcain@codeaurora.org\u003e\n" }, { "commit": "ee2e3089ff38457eac4ecd3c37b9ce7f82867fb7", "tree": "43608af62eff3ca38ade8dd6db6f747b67285101", "parents": [ "f3b54abcce53f3a5945eecec0e9ba4c653748d62" ], "author": { "name": "Konstantin Dorfman", "email": "kdorfman@codeaurora.org", "time": "Tue Aug 16 15:12:01 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:20 2011 -0700" }, "message": "msm:sdio: channel close feature\n\nThe feature implement sdio_close() api call - synchronous with mdm\n(sdio peer) close channel flow. The flow will clean pending rx packets\nand leave the channel in close state.\nNOTE: close for stream channels is not supported\n\nSigned-off-by: Konstantin Dorfman \u003ckdorfman@codeaurora.org\u003e\n" }, { "commit": "f3b54abcce53f3a5945eecec0e9ba4c653748d62", "tree": "855cb9354bd4623b8d032792b166add2f14fba51", "parents": [ "c3f8dd345dcf4b2c574add95a56c7649c9fd458e" ], "author": { "name": "Sachin Shah", "email": "sachins@codeaurora.org", "time": "Wed Jul 20 12:03:26 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:19 2011 -0700" }, "message": "tzcom: Fix resp calculation\n\nResponse buffer is always an offset in input shared buffer.\nCan\u0027t rely on the sb_in_rsp_addr as that value is not filled\nfrom TZ side. This also makes it consitent with the response\nbuffer calculation in tzcom_send_cmd().\n\nSigned-off-by: Sachin Shah \u003csachins@codeaurora.org\u003e\n" }, { "commit": "c3f8dd345dcf4b2c574add95a56c7649c9fd458e", "tree": "9647f39c93422837c727ed2f035bb4e5b07e95a5", "parents": [ "4eade0d763a541f7390c4082dbbaf754263a62fe" ], "author": { "name": "Sachin Shah", "email": "sachins@codeaurora.org", "time": "Fri Jun 17 11:39:10 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:18 2011 -0700" }, "message": "tzcom: Zero out input shared buffer\n\n- Zero out SB input buffer after a request is\n successfully fulfilled to meet security\n requirements.\n- Remove redundant check for response length.\n\nSigned-off-by: Sachin Shah \u003csachins@codeaurora.org\u003e\n" } ], "next": "4eade0d763a541f7390c4082dbbaf754263a62fe" }