)]}' { "log": [ { "commit": "016af53a6de6837e5be3da68901083ea85ebb4da", "tree": "9be7a549fcef9fe060b00d406a99b9b7c5319688", "parents": [ "b58d13a0216d4e0753668214f23e1d2c24c30f8c" ], "author": { "name": "Alan Cox", "email": "alan@linux.intel.com", "time": "Sat Sep 19 13:13:32 2009 -0700" }, "committer": { "name": "Live-CD User", "email": "linux@linux.site", "time": "Sat Sep 19 13:13:32 2009 -0700" }, "message": "serial: kill USF_CLOSING_* definitions\n\nThe serial layer for some reason uses different defines for the special\ncase close delays and then conditionally switches to/from the normal ones\nin the ioctls.\n\nRemove this rather pointless abstraction\n\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "b58d13a0216d4e0753668214f23e1d2c24c30f8c", "tree": "e641971a9f1464b7f5a045d4df0e58874b6bf035", "parents": [ "bdc04e3174e18f475289fa8f4144f66686326b7e" ], "author": { "name": "Alan Cox", "email": "alan@linux.intel.com", "time": "Sat Sep 19 13:13:32 2009 -0700" }, "committer": { "name": "Live-CD User", "email": "linux@linux.site", "time": "Sat Sep 19 13:13:32 2009 -0700" }, "message": "serial: move port users helper\n\nThis little helper is now tty_port specific and useful generally so move it\n\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "bdc04e3174e18f475289fa8f4144f66686326b7e", "tree": "c0bf03c8d6df1629bfa26b686fe65ffb0c87aeb7", "parents": [ "a2bceae065ed8c4f552b35c4dde4cc2db05ce9e3" ], "author": { "name": "Alan Cox", "email": "alan@linux.intel.com", "time": "Sat Sep 19 13:13:31 2009 -0700" }, "committer": { "name": "Live-CD User", "email": "linux@linux.site", "time": "Sat Sep 19 13:13:31 2009 -0700" }, "message": "serial: move delta_msr_wait into the tty_port\n\nThis is used by various drivers not just serial and can be extracted\nas commonality\n\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\n" }, { "commit": "a2bceae065ed8c4f552b35c4dde4cc2db05ce9e3", "tree": "90c50ada1362bbb65c1b6f8c8c4fbc9227a21455", "parents": [ "a03006860d272eac5a8ebf23f04f54c7e1e783a5" ], "author": { "name": "Alan Cox", "email": "alan@linux.intel.com", "time": "Sat Sep 19 13:13:31 2009 -0700" }, "committer": { "name": "Live-CD User", "email": "linux@linux.site", "time": "Sat Sep 19 13:13:31 2009 -0700" }, "message": "serial: replace the state mutex with the tty port mutex\n\nThey cover essentially the same stuff and we can therefore fold it into the\ntty_port one.\n\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "a03006860d272eac5a8ebf23f04f54c7e1e783a5", "tree": "2037216cf2cada58d1524f2403f45e6ff741918f", "parents": [ "ccce6debb62d94964e3878f978a56b0f3e32d94f" ], "author": { "name": "Alan Cox", "email": "alan@linux.intel.com", "time": "Sat Sep 19 13:13:30 2009 -0700" }, "committer": { "name": "Live-CD User", "email": "linux@linux.site", "time": "Sat Sep 19 13:13:30 2009 -0700" }, "message": "serial: kill off uif_t\n\nThis typedef is now extinct\n\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "ccce6debb62d94964e3878f978a56b0f3e32d94f", "tree": "c6df089e5b4394d841819090921b1673901d7a3a", "parents": [ "91312cdb4fcd832341e425f74f49938e0503c929" ], "author": { "name": "Alan Cox", "email": "alan@linux.intel.com", "time": "Sat Sep 19 13:13:30 2009 -0700" }, "committer": { "name": "Live-CD User", "email": "linux@linux.site", "time": "Sat Sep 19 13:13:30 2009 -0700" }, "message": "serial: move the flags into the tty_port field\n\nFortunately the serial layer was designed to use the same flag values but\nwith different names. It has its own SUSPENDED flag which is a free slot in\nthe ASYNC flags so we allocate it in the ASYNC flags instead.\n\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "91312cdb4fcd832341e425f74f49938e0503c929", "tree": "d05e4ea773026363df0c9cddf37b465f44125a0f", "parents": [ "46d57a449aa13d9c6adcc9d1dbc7b9a0ecfb69d8" ], "author": { "name": "Alan Cox", "email": "alan@linux.intel.com", "time": "Sat Sep 19 13:13:29 2009 -0700" }, "committer": { "name": "Live-CD User", "email": "linux@linux.site", "time": "Sat Sep 19 13:13:29 2009 -0700" }, "message": "serial: move count into the tty_port version\n\nRemove more stuff from the serial special case code\n\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "5e99df561fc830730d63672d795a0b02ef8cdd6f", "tree": "6fffbbb737a7d01d58b7b9415f041bd50fca26b4", "parents": [ "ebd2c8f6d2ec4012c267ecb95e72a57b8355a705" ], "author": { "name": "Alan Cox", "email": "alan@linux.intel.com", "time": "Sat Sep 19 13:13:28 2009 -0700" }, "committer": { "name": "Live-CD User", "email": "linux@linux.site", "time": "Sat Sep 19 13:13:28 2009 -0700" }, "message": "serial: Fold closing_* fields into the tty_port ones\n\nRemove some more serial specific use\n\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "ebd2c8f6d2ec4012c267ecb95e72a57b8355a705", "tree": "36a01b2ac2520bf7e0d9362b8da17d3c894da2db", "parents": [ "11d85d7b2ecc72fe752bba55389e7d11907528af" ], "author": { "name": "Alan Cox", "email": "alan@linux.intel.com", "time": "Sat Sep 19 13:13:28 2009 -0700" }, "committer": { "name": "Live-CD User", "email": "linux@linux.site", "time": "Sat Sep 19 13:13:28 2009 -0700" }, "message": "serial: kill off uart_info\n\nWe moved this into uart_state, now move the fields out of the separate\nstructure and kill it off.\n\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "a509a7e478e4766114d69f12d19d644ac63e9765", "tree": "2b994dabb7b97ceadac959f51d29ddf68216cb59", "parents": [ "d3b5cffcf84a8bdc7073dce4745d67c72629af85" ], "author": { "name": "Alan Cox", "email": "alan@linux.intel.com", "time": "Sat Sep 19 13:13:26 2009 -0700" }, "committer": { "name": "Live-CD User", "email": "linux@linux.site", "time": "Sat Sep 19 13:13:26 2009 -0700" }, "message": "tty: USB does not need the filp argument in the drivers\n\nAnd indeed none of them use it. Clean this up as it will make moving to a\nstandard open method rather easier.\n\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "d3b5cffcf84a8bdc7073dce4745d67c72629af85", "tree": "dfcaa9dbc59b3f17160624803f54711db1d9786f", "parents": [ "a5eb56242d1e2d82938a066219ac1cdf0d68adc8" ], "author": { "name": "Alan Cox", "email": "alan@linux.intel.com", "time": "Sat Sep 19 13:13:26 2009 -0700" }, "committer": { "name": "Live-CD User", "email": "linux@linux.site", "time": "Sat Sep 19 13:13:26 2009 -0700" }, "message": "vt: add an activate and lock\n\nX and other graphical interfaces need to be able to flip to a console\nand lock it into graphics mode without races.\n\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "a5eb56242d1e2d82938a066219ac1cdf0d68adc8", "tree": "09e72d0ac44e7494499936fea0ad3fe1b5ce5633", "parents": [ "8d233558cd99a888571bb5a88a74970879e0aba4" ], "author": { "name": "Alan Cox", "email": "alan@linux.intel.com", "time": "Sat Sep 19 13:13:25 2009 -0700" }, "committer": { "name": "Live-CD User", "email": "linux@linux.site", "time": "Sat Sep 19 13:13:25 2009 -0700" }, "message": "vt: move kernel stuff out of vt.h\n\nWe have vt_kern.h for this\n\n\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "8d233558cd99a888571bb5a88a74970879e0aba4", "tree": "a5a39a0faff85cd26ed3dc7aa7e7ee4406677fdb", "parents": [ "8b92e87d39bfd046e7581e1fe0f40eac40f88608" ], "author": { "name": "Alan Cox", "email": "alan@linux.intel.com", "time": "Sat Sep 19 13:13:25 2009 -0700" }, "committer": { "name": "Live-CD User", "email": "linux@linux.site", "time": "Sat Sep 19 13:13:25 2009 -0700" }, "message": "vt: remove power stuff from kernel/power\n\nIn the past someone gratuitiously borrowed chunks of kernel internal vt\ncode and dumped them in kernel/power. They have all sorts of deep relations\nwith the vt code so put them in the vt tree instead\n\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "8b92e87d39bfd046e7581e1fe0f40eac40f88608", "tree": "b558f69f2a9875ea6029546f9f70d268fd3ebaf6", "parents": [ "4455e344959a217ffc28de2ab1af87541322b343" ], "author": { "name": "Alan Cox", "email": "alan@linux.intel.com", "time": "Sat Sep 19 13:13:24 2009 -0700" }, "committer": { "name": "Live-CD User", "email": "linux@linux.site", "time": "Sat Sep 19 13:13:24 2009 -0700" }, "message": "vt: add an event interface\n\nThis is needed and requested in various forms for ConsoleKit, screenblank\nhandling and the like so do the job with a single interface. Also build the\ninterface so that unlike VT_WAITACTIVE and friends it won\u0027t miss events.\n\nFIXME: Should this be a waitactive ioctl or a new device file you can poll\nand read events from. We need the code anyway to fix up the existing broken\nwait for console switch logic but the ConsoleKit people would prefer the\nnew device to the ioctl we have here\n\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "7ca0ff9ab3218ec443a7a9ad247e4650373ed41e", "tree": "73cb5a8f36d9999e0c85957cc27e7be2f140a610", "parents": [ "24d481ecae1614cf02e638c8dce9b6e8bf230603" ], "author": { "name": "Alan Cox", "email": "alan@linux.intel.com", "time": "Sat Sep 19 13:13:20 2009 -0700" }, "committer": { "name": "Live-CD User", "email": "linux@linux.site", "time": "Sat Sep 19 13:13:20 2009 -0700" }, "message": "tty: Add a full port_close function\n\nNow we are extracting out methods for shutdown and the like we can add a\nproper tty_port_close method that knows all the innards of the tty closing\nprocess and hides the lot from the caller.\n\nAt some point in the future this will be paired with a similar open()\nhelper and the drivers can stick to hardware management.\n\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nCc: stable \u003cstable@kernel.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "1c2f04937b3e397a5695953c6b82aa4c77d21eb8", "tree": "8ccc7300fcc3fb4f3824575a7e7c47a4f3f366ba", "parents": [ "1e066d803ab7e34e9efb3b0766d618c0cd2598e4" ], "author": { "name": "Vikram Pandita", "email": "vikram.pandita@ti.com", "time": "Sat Sep 19 13:13:19 2009 -0700" }, "committer": { "name": "Live-CD User", "email": "linux@linux.site", "time": "Sat Sep 19 13:13:19 2009 -0700" }, "message": "serial: 8250: add IRQ trigger support\n\nThere is currently no provision for passing IRQ trigger flags for\nserial IRQs with triggering requirements (such as GPIO IRQs)\n\nThis patch adds irqflags to plat_serial8250_port that can be passed\nfrom board file to reqest_irq() of 8250 driver\n\nChanges are backward compatible with boards passing UPF_SHARE_IRQ flag\n\nTested on Zoom2 board that has IRQF_TRIGGER_RISING requirement for 8250 irq\n\n[Moved new flag to end to fix bugs in the original with the old_serial array\n\t-- Alan]\n\nSigned-off-by: Vikram Pandita \u003cvikram.pandita@ti.com\u003e\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "f8a7c1a976a6672204c7f4f0f694f33715dfa617", "tree": "cf515b038bb3765d57249b692d8989257befdabc", "parents": [ "5342b77c4123ba39f911d92a813295fb3bb21f69" ], "author": { "name": "Alan Cox", "email": "alan@linux.intel.com", "time": "Sat Sep 19 13:13:17 2009 -0700" }, "committer": { "name": "Live-CD User", "email": "linux@linux.site", "time": "Sat Sep 19 13:13:17 2009 -0700" }, "message": "kfifo: Use \"const\" definitions\n\nCurrently kfifo cannot be used by parts of the kernel that use \"const\"\nproperly as kfifo itself does not use const for passed data blocks which\nare indeed const.\n\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "3aeea5b92210083c7cffd4f08a0bb141d3f2d574", "tree": "43c1572a397b902513e75ad08f8bdbd51b06d41e", "parents": [ "0d3487294e4e175eb6371c8df8ef44b45964e0f6" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Sat Sep 19 13:13:16 2009 -0700" }, "committer": { "name": "Live-CD User", "email": "linux@linux.site", "time": "Sat Sep 19 13:13:16 2009 -0700" }, "message": "cyclades: introduce cyy_readb/writeb\n\nAdd helpers for io operations, so that we can eliminate huge\namount of supporting code. It is now centralized in those\nhelpers and used values are precomputed in the init phase.\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "f0eefdc30e55e761facf645bd1be1339b21c30e6", "tree": "fbde46003a58550c3312ce7732a23213985e81fa", "parents": [ "f0737579424dd2c4e68bdd54c718455a3f42c7b5" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Sat Sep 19 13:13:13 2009 -0700" }, "committer": { "name": "Live-CD User", "email": "linux@linux.site", "time": "Sat Sep 19 13:13:13 2009 -0700" }, "message": "cyclades: avoid addresses recomputation\n\nDon\u0027t fetch firmware address and recompute channel control on each\nport access. Precompute the values on init and use them later all\nthe time.\n\nThe same for board control.\n\nThis simplify code and improves readability.\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "3530c1886291df061e3972c55590777ef1cb67f8", "tree": "bd6755e533eb5a0f37ff600da6bc0d9d1ba33c17", "parents": [ "6952b61de9984073289859073e8195ad0bee8fd5", "1358870deaf11a752a84fbd89201749aa62498e8" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 10:56:26 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 10:56:26 2009 -0700" }, "message": "Merge branch \u0027for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4\n\n* \u0027for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (64 commits)\n ext4: Update documentation about quota mount options\n ext4: replace MAX_DEFRAG_SIZE with EXT_MAX_BLOCK\n ext4: Fix the alloc on close after a truncate hueristic\n ext4: Add a tracepoint for ext4_alloc_da_blocks()\n ext4: store EXT4_EXT_MIGRATE in i_state instead of i_flags\n ext4: limit block allocations for indirect-block files to \u003c 2^32\n ext4: Fix different block exchange issue in EXT4_IOC_MOVE_EXT\n ext4: Add null extent check to ext_get_path\n ext4: Replace BUG_ON() with ext4_error() in move_extents.c\n ext4: Replace get_ext_path macro with an inline funciton\n ext4: Fix include/trace/events/ext4.h to work with Systemtap\n ext4: Fix initalization of s_flex_groups\n ext4: Always set dx_node\u0027s fake_dirent explicitly.\n ext4: Fix async commit mode to be safe by using a barrier\n ext4: Don\u0027t update superblock write time when filesystem is read-only\n ext4: Clarify the locking details in mballoc\n ext4: check for need init flag in ext4_mb_load_buddy\n ext4: move ext4_mb_init_group() function earlier in the mballoc.c\n ext4: Make non-journal fsync work properly\n ext4: Assure that metadata blocks are written during fsync in no journal mode\n ...\n" }, { "commit": "6952b61de9984073289859073e8195ad0bee8fd5", "tree": "ce3336a0650f3be144f1c8ed3ab030a733919a82", "parents": [ "6423133bdee0e07d1c2f8411cb3fe676c207ba33" ], "author": { "name": "Alexey Dobriyan", "email": "adobriyan@gmail.com", "time": "Fri Sep 18 23:55:55 2009 +0400" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 09:48:52 2009 -0700" }, "message": "headers: taskstats_kern.h trim\n\nRemove net/genetlink.h inclusion, now sched.c won\u0027t be recompiled\nbecause of some networking changes.\n\nSigned-off-by: Alexey Dobriyan \u003cadobriyan@gmail.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "afa12e72decb84cb8378ae2e66e51336e3c66962", "tree": "96f23729e440d60740819b55ae320092a8f284db", "parents": [ "81ce31b773226332475f89501b1072bec0c0e241", "e04ab958727a4b314df3e40036d72d9348835d0c" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 09:47:25 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 09:47:25 2009 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:\n [WATCHDOG] sizeof cleanup\n [WATCHDOG] wdt_pci: fix printk and variable type\n [WATCHDOG] wdt_pci - use pci_request_region\n [WATCHDOG] ar7_wdt: Fix error handling during probe.\n [WATCHDOG] ar7_wdt: convert to become a platform driver\n [WATCHDOG] fix book E watchdog to take WDIOC_SETTIMEOUT arg in seconds\n [WATCHDOG] davinci: use clock framework for timer frequency\n [WATCHDOG] Use DIV_ROUND_UP() macro in the coh901327 WDT\n [WATCHDOG] Add support for WM831x watchdog\n [WATCHDOG] Add watchdog driver for NUC900\n [WATCHDOG] add SBC-FITPC2 watchdog driver\n" }, { "commit": "515b696b282f856c3ad1679ccd658120faa387d0", "tree": "d9d7c1185c396617f128ca23463062308d11393b", "parents": [ "fa877c71e2136bd682b45022c96d5e073ced9f58", "064a16dc41be879d12bd5de5d2f9d38d890e0ee7" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 09:43:09 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 09:43:09 2009 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (262 commits)\n sh: mach-ecovec24: Add user debug switch support\n sh: Kill off unused se_skipped in alignment trap notification code.\n sh: Wire up HAVE_SYSCALL_TRACEPOINTS.\n video: sh_mobile_lcdcfb: use both register sets for display panning\n video: sh_mobile_lcdcfb: implement display panning\n sh: Fix up sh7705 flush_dcache_page() build.\n sh: kfr2r09: document the PLL/FLL \u003c-\u003e RF relationship.\n sh: mach-ecovec24: need asm/clock.h.\n sh: mach-ecovec24: deassert usb irq on boot.\n sh: Add KEYSC support for EcoVec24\n sh: add kycr2_delay for sh_keysc\n sh: cpufreq: Include CPU id in info messages.\n sh: multi-evt support for SH-X3 proto CPU.\n sh: clkfwk: remove bogus set_bus_parent() from SH7709.\n sh: Fix the indication point of the liquid crystal of AP-325RXA(AP3300)\n sh: Add EcoVec24 romImage defconfig\n sh: USB disable process is needed if romImage boot for EcoVec24\n sh: EcoVec24: add HIZA setting for LED\n sh: EcoVec24: write MAC address in boot\n sh: Add romImage support for EcoVec24\n ...\n" }, { "commit": "9eead2a8115d2a6aecf267c292f751f7761fa5f8", "tree": "133cc2c9616bbc53b92fdf68137621a11e3c80c6", "parents": [ "6f130478e24d810078c3f0ee292bcc4ec034dcce", "79a9d99434b104c562f30f21b75317667f444793" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 09:23:03 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 09:23:03 2009 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:\n fuse: add fusectl interface to max_background\n fuse: limit user-specified values of max background requests\n fuse: use drop_nlink() instead of direct nlink manipulation\n fuse: document protocol version negotiation\n fuse: make the number of max background requests and congestion threshold tunable\n" }, { "commit": "6f130478e24d810078c3f0ee292bcc4ec034dcce", "tree": "1c782ccceaf998e9e23862094588c125ee6f38af", "parents": [ "6f128fa344833bf8bf076a51d14401661c146470", "75f2ba8f0006440e720e47ae14c917e07c452d72" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 09:22:36 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 09:22:36 2009 -0700" }, "message": "Merge branch \u0027for-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6\n\n* \u0027for-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (55 commits)\n regulator: Voltage count for AB3100\n mfd: Convert WM8350 to use request_threaded_irq()\n mfd: Update MAINTAINERS patterns for WM831x\n mfd: Fix twl4030-power warnings\n regulator: AB3100 support\n rtc: AB3100 RTC support\n mfd: Fix ab3100-otp build failure\n mfd: OMAP: Board-specifc twl4030 DPS scripts for RX51 board\n mfd: Print warning for twl4030 out-of-order script loading\n mfd: Add support for TWL4030/5030 dynamic power switching\n mfd: AB3100 OTP readout\n regulator: Add Freescale MC13783 driver\n mfd: Add Freescale MC13783 driver\n mfd: AB3100 disable irq nosync\n mfd: AB3100 alter default setting\n mfd: AB3100 propagate error\n mfd: AB3100 accessor function cleanups\n rtc: Add support for RTCs on Wolfson WM831x devices\n regulator: get pcap data from the parent device\n input: PCAP2 misc input driver\n ...\n" }, { "commit": "2511817cf9b1cf2506f47e20bb128e2da231c150", "tree": "26b0cd6b9491bcb1284e6c60f64ea1dbd25f2aa7", "parents": [ "714af0693863dfb6f075f4465053976d2d076a21", "56fcad29d4b3cbcbb2ed47a9d3ceca3f57175417" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 09:18:52 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 09:18:52 2009 -0700" }, "message": "Merge branch \u0027for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6\n\n* \u0027for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:\n ext3: Flush disk caches on fsync when needed\n ext3: Add locking to ext3_do_update_inode\n ext3: Fix possible deadlock between ext3_truncate() and ext3_get_blocks()\n jbd: Annotate transaction start also for journal_restart()\n jbd: Journal block numbers can ever be only 32-bit use unsigned int for them\n ext3: Update MAINTAINERS for ext3 and JBD\n JBD: round commit timer up to avoid uncommitted transaction\n" }, { "commit": "714af0693863dfb6f075f4465053976d2d076a21", "tree": "4da5efd5b229611cdee6a503dbae090adff3edf0", "parents": [ "a03fdb7612874834d6847107198712d18b5242c7", "f0adb134d8dc9993a9998dc50845ec4f6ff4fadc" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 09:16:57 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 09:16:57 2009 -0700" }, "message": "Merge branch \u0027next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq\n\n* \u0027next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:\n [CPUFREQ] Fix NULL ptr regression in powernow-k8\n [CPUFREQ] Create a blacklist for processors that should not load the acpi-cpufreq module.\n [CPUFREQ] Powernow-k8: Enable more than 2 low P-states\n [CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)\n [CPUFREQ] ondemand - Use global sysfs dir for tuning settings\n [CPUFREQ] Introduce global, not per core: /sys/devices/system/cpu/cpufreq\n [CPUFREQ] Bail out of cpufreq_add_dev if the link for a managed CPU got created\n [CPUFREQ] Factor out policy setting from cpufreq_add_dev\n [CPUFREQ] Factor out interface creation from cpufreq_add_dev\n [CPUFREQ] Factor out symlink creation from cpufreq_add_dev\n [CPUFREQ] cleanup up -ENOMEM handling in cpufreq_add_dev\n [CPUFREQ] Reduce scope of cpu_sys_dev in cpufreq_add_dev\n [CPUFREQ] update Doc for cpuinfo_cur_freq and scaling_cur_freq\n" }, { "commit": "a03fdb7612874834d6847107198712d18b5242c7", "tree": "9ae81170509fd8b1c23d1b7e8edfa7a2203ffce3", "parents": [ "202c4675c55ddf6b443c7e057d2dff6b42ef71aa", "12e09337fe238981cb0c87543306e23775d1a143" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 09:15:24 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 09:15:24 2009 -0700" }, "message": "Merge branch \u0027timers-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027timers-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (34 commits)\n time: Prevent 32 bit overflow with set_normalized_timespec()\n clocksource: Delay clocksource down rating to late boot\n clocksource: clocksource_select must be called with mutex locked\n clocksource: Resolve cpu hotplug dead lock with TSC unstable, fix crash\n timers: Drop a function prototype\n clocksource: Resolve cpu hotplug dead lock with TSC unstable\n timer.c: Fix S/390 comments\n timekeeping: Fix invalid getboottime() value\n timekeeping: Fix up read_persistent_clock() breakage on sh\n timekeeping: Increase granularity of read_persistent_clock(), build fix\n time: Introduce CLOCK_REALTIME_COARSE\n x86: Do not unregister PIT clocksource on PIT oneshot setup/shutdown\n clocksource: Avoid clocksource watchdog circular locking dependency\n clocksource: Protect the watchdog rating changes with clocksource_mutex\n clocksource: Call clocksource_change_rating() outside of watchdog_lock\n timekeeping: Introduce read_boot_clock\n timekeeping: Increase granularity of read_persistent_clock()\n timekeeping: Update clocksource with stop_machine\n timekeeping: Add timekeeper read_clock helper functions\n timekeeping: Move NTP adjusted clock multiplier to struct timekeeper\n ...\n\nFix trivial conflict due to MIPS lemote -\u003e loongson renaming.\n" }, { "commit": "502a0106b2cc31940f690dc6693fddfd3b97cab5", "tree": "fc6e7c4aa8a8df5b5a72566a9a3cda9153e7802d", "parents": [ "0400e3134b03336617138f9ebf2cd0f117ceef20" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Mon Jul 27 14:46:12 2009 +0100" }, "committer": { "name": "Wim Van Sebroeck", "email": "wim@iguana.be", "time": "Fri Sep 18 08:35:49 2009 +0000" }, "message": "[WATCHDOG] Add support for WM831x watchdog\n\nThe WM831x series of devices provide a watchdog with configurable\nbehaviour on timer expiry.\n\nCurrently this driver support refreshes via a register or GPIO line and\nautonomous refreshes from a hardware source (eg, a clock).\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Wim Van Sebroeck \u003cwim@iguana.be\u003e\n\n" }, { "commit": "dcbf77b9e86e1726f5fbd01bb98820dac06d456e", "tree": "2f0b728ce70c03e1d0e3461e8a3c3d1fbe68fb90", "parents": [ "ca043a66ae48c74fa628ec92178f7a54f5b9a106", "29cd8bae396583a2ee9a3340db8c5102acf9f6fd" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Sep 17 21:00:02 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Sep 17 21:00:02 2009 -0700" }, "message": "Merge branch \u0027sched-core-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027sched-core-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits)\n sched: Fix SD_POWERSAVING_BALANCE|SD_PREFER_LOCAL vs SD_WAKE_AFFINE\n sched: Stop buddies from hogging the system\n sched: Add new wakeup preemption mode: WAKEUP_RUNNING\n sched: Fix TASK_WAKING \u0026 loadaverage breakage\n sched: Disable wakeup balancing\n sched: Rename flags to wake_flags\n sched: Clean up the load_idx selection in select_task_rq_fair\n sched: Optimize cgroup vs wakeup a bit\n sched: x86: Name old_perf in a unique way\n sched: Implement a gentler fair-sleepers feature\n sched: Add SD_PREFER_LOCAL\n sched: Add a few SYNC hint knobs to play with\n sched: Fix sync wakeups again\n sched: Add WF_FORK\n sched: Rename sync arguments\n sched: Rename select_task_rq() argument\n sched: Feature to disable APERF/MPERF cpu_power\n x86: sched: Provide arch implementations using aperf/mperf\n x86: Add generic aperf/mperf code\n x86: Move APERF/MPERF into a X86_FEATURE\n ...\n\nFix up trivial conflict in arch/x86/include/asm/processor.h due to\nnearby addition of amd_get_nb_id() declaration from the EDAC merge.\n" }, { "commit": "1218259b2d09c79ed1113d3a6dbb9a1d6391f5cb", "tree": "8f07cd39f6a5f74f41d5be34bc0d843428f04082", "parents": [ "ca9a702e50287cf429f1c12832319a26a715e70b", "0efb4d20723d58edbad29d1ff98a86b631adb5e6" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Sep 17 20:56:37 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Sep 17 20:56:37 2009 -0700" }, "message": "Merge branch \u0027tracing-core-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027tracing-core-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (44 commits)\n vsnprintf: remove duplicate comment of vsnprintf\n softirq: add BLOCK_IOPOLL to softirq_to_name\n oprofile: fix oprofile regression: select RING_BUFFER_ALLOW_SWAP\n tracing: switch function prints from %pf to %ps\n vsprintf: add %ps that is the same as %pS but is like %pf\n tracing: Fix minor bugs for __unregister_ftrace_function_probe\n tracing: remove notrace from __kprobes annotation\n tracing: optimize global_trace_clock cachelines\n MAINTAINERS: Update tracing tree details\n ftrace: document function and function graph implementation\n tracing: make testing syscall events a separate configuration\n tracing: remove some unused macros\n ftrace: add compile-time check on F_printk()\n tracing: fix F_printk() typos\n tracing: have TRACE_EVENT macro use __flags to not shadow parameter\n tracing: add static to generated TRACE_EVENT functions\n ring-buffer: typecast cmpxchg to fix PowerPC warning\n tracing: add filter event logic to special, mmiotrace and boot tracers\n tracing: remove trace_event_types.h\n tracing: use the new trace_entries.h to create format files\n ...\n" }, { "commit": "ca9a702e50287cf429f1c12832319a26a715e70b", "tree": "a29c7c68d2945c47d058b42ecd4475fed5c19fe2", "parents": [ "bbe5a96f678efcad83de8f900ab4ab963a99c805", "d15d6e6cc340566d53d953ffdec2c9e96816fa52" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Sep 17 20:54:49 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Sep 17 20:54:49 2009 -0700" }, "message": "Merge branch \u0027upstream-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev\n\n* \u0027upstream-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:\n libata: Add pata_atp867x driver for Artop/Acard ATP867X controllers\n pata_amd: do not filter out valid modes in nv_mode_filter\n sata_promise: update reset code\n sata_promise: disable hotplug on 1st gen chips\n libata: fix spurious WARN_ON_ONCE() on port freeze\n ahci: restore pci_intx() handling\n" }, { "commit": "f205ce83a766c08965ec78342f138cdc00631fba", "tree": "7a9d2db6c16594ef7c730ca93a87131cf0abca41", "parents": [ "3dc95666df0e1ae5b7381a8ec97a583bb3ce4306", "b31c50a7f9e93a61d14740dedcbbf2c376998bc7" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Sep 17 20:53:52 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Sep 17 20:53:52 2009 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (66 commits)\n be2net: fix some cmds to use mccq instead of mbox\n atl1e: fix 2.6.31-git4 -- ATL1E 0000:03:00.0: DMA-API: device driver frees DMA\n pkt_sched: Fix qstats.qlen updating in dump_stats\n ipv6: Log the affected address when DAD failure occurs\n wl12xx: Fix print_mac() conversion.\n af_iucv: fix race when queueing skbs on the backlog queue\n af_iucv: do not call iucv_sock_kill() twice\n af_iucv: handle non-accepted sockets after resuming from suspend\n af_iucv: fix race in __iucv_sock_wait()\n iucv: use correct output register in iucv_query_maxconn()\n iucv: fix iucv_buffer_cpumask check when calling IUCV functions\n iucv: suspend/resume error msg for left over pathes\n wl12xx: switch to %pM to print the mac address\n b44: the poll handler b44_poll must not enable IRQ unconditionally\n ipv6: Ignore route option with ROUTER_PREF_INVALID\n bonding: make ab_arp select active slaves as other modes\n cfg80211: fix SME connect\n rc80211_minstrel: fix contention window calculation\n ssb/sdio: fix printk format warnings\n p54usb: add Zcomax XG-705A usbid\n ...\n" }, { "commit": "d15d6e6cc340566d53d953ffdec2c9e96816fa52", "tree": "8b2052455ef7daca721e55c793216e5f54f6d08d", "parents": [ "90950a2504b66d626a73f55ca949a2e79ff4b7c4" ], "author": { "name": "John(Jung-Ik) Lee", "email": "jilee@google.com", "time": "Mon Sep 14 21:32:33 2009 -0700" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Thu Sep 17 16:47:06 2009 -0400" }, "message": "libata: Add pata_atp867x driver for Artop/Acard ATP867X controllers\n\nThis is a new pata driver for ARTOP 867X 64bit 4-channel UDMA133 ATA ctrls.\nBased on the Atp867 data sheet rev 1.2, Acard, and in part on early ide codes\nfrom Eric Uhrhane \u003cericu@google.com\u003e.\n\nSigned-off-by: John(Jung-Ik) Lee \u003cjilee@google.com\u003e\nReviewed-by: Grant Grundler \u003cgrundler@google.com\u003e\nReviewed-by: Gwendal Gringo \u003cgwendal@google.com\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "45bd00d31de886f8425b4dd33204b911b0a466a9", "tree": "06204f2452e02ca916666173d50f5035d69065ef", "parents": [ "40d9d82c8ab8c4e2373a23a1e31dc8d84c53aa01", "ab86e5765d41a5eb4239a1c04d613db87bea5ed8" ], "author": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Sep 17 20:52:23 2009 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Sep 17 20:53:10 2009 +0200" }, "message": "Merge branch \u0027linus\u0027 into tracing/core\n\nMerge reason: Pick up kernel/softirq.c update for dependent fix.\n\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "3aee0605a41399063c0ad396f1f4267108f210d3", "tree": "c9e3ce738c3d093dbd861c5a53b63157edd893c2", "parents": [ "f4c3f03838ae47a92f2d15d48ddf68deae5d7ebb", "0396c215f301e92677d1e9a064b405e31501dc1d" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Sep 17 09:44:09 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Sep 17 09:44:09 2009 -0700" }, "message": "Merge branch \u0027for-upstream\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb\n\n* \u0027for-upstream\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb:\n uwb: avoid radio controller reset loops\n uwb: stop uwbd thread if rc-\u003estart() fails\n uwb: handle radio controller events with out-of-range IDs correctly\n" }, { "commit": "37bce07077b0c335d8747f1ddb27ad585434a47e", "tree": "baf697dc80a83a22261520661b57bd0ba9777bec", "parents": [ "3860e6c4b93d6a1c2428f0f45c77e083197da2d4" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Wed Sep 16 19:07:32 2009 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 15:48:18 2009 +0200" }, "message": "mfd: Convert WM8350 to use request_threaded_irq()\n\nInstead of hand rolling our own variant.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "ad4b78bbcbab66998b05d422ac6106b645796e54", "tree": "45f3561f4bd6b886948a3b0eea64edab9bab9eda", "parents": [ "eb24073bc1fe3e569a855cf38d529fb650c35524" ], "author": { "name": "Peter Zijlstra", "email": "peterz@infradead.org", "time": "Wed Sep 16 12:31:31 2009 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Thu Sep 17 10:17:25 2009 +0200" }, "message": "sched: Add new wakeup preemption mode: WAKEUP_RUNNING\n\nCreate a new wakeup preemption mode, preempt towards tasks that run\nshorter on avg. It sets next buddy to be sure we actually run the task\nwe preempted for.\n\nTest results:\n\n root@twins:~# while :; do :; done \u0026\n [1] 6537\n root@twins:~# while :; do :; done \u0026\n [2] 6538\n root@twins:~# while :; do :; done \u0026\n [3] 6539\n root@twins:~# while :; do :; done \u0026\n [4] 6540\n\n root@twins:/home/peter# ./latt -c4 sleep 4\n Entries: 48 (clients\u003d4)\n\n Averages:\n ------------------------------\n Max 4750 usec\n Avg 497 usec\n Stdev 737 usec\n\n root@twins:/home/peter# echo WAKEUP_RUNNING \u003e /debug/sched_features\n\n root@twins:/home/peter# ./latt -c4 sleep 4\n Entries: 48 (clients\u003d4)\n\n Averages:\n ------------------------------\n Max 14 usec\n Avg 5 usec\n Stdev 3 usec\n\nDisabled by default - needs more testing.\n\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nAcked-by: Mike Galbraith \u003cefault@gmx.de\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\nLKML-Reference: \u003cnew-submission\u003e\n" }, { "commit": "d619bc143e311a738113dbbe7792bd032403939f", "tree": "f5a7bebf4058761a223dba7ffc7057d70d17245b", "parents": [ "bd207cfb0011389d55827b3f3181c60e8c3c7148" ], "author": { "name": "Linus Walleij", "email": "linus.walleij@stericsson.com", "time": "Wed Sep 09 11:31:00 2009 +0200" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:47:25 2009 +0200" }, "message": "regulator: AB3100 support\n\nThis adds support for the regulators found in the AB3100\nMixed-Signal IC.\n\nIt further also defines platform data for the ST-Ericsson\nU300 platform and extends the AB3100 MFD driver so that\nplatform/board data with regulation constraints and an init\nfunction can be passed down all the way from the board to\nthe regulators.\n\nSigned-off-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "8aba721b23917bc6d374ad42bf80bde5058710e2", "tree": "0a11d29e1d72d9d2cd1fddfea17e438ccffdc1b7", "parents": [ "9312fffbad5661a0ad52b5ca5a04875c763a35fa" ], "author": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Aug 27 20:49:08 2009 +0200" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:47:23 2009 +0200" }, "message": "mfd: Fix ab3100-otp build failure\n\nab3100.h should include linux/workqueue.h for otp to build properly.\n\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "ebf0bd366ed8161e6fbc919705d878ccbfd51624", "tree": "e6425ad580bdc6a4bc34163dcde3f08b6deb7474", "parents": [ "12992dd89c84839167f97aae540f2ec889daf782" ], "author": { "name": "Amit Kucheria", "email": "amit.kucheria@verdurent.com", "time": "Mon Aug 31 18:32:18 2009 +0200" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:47:22 2009 +0200" }, "message": "mfd: Add support for TWL4030/5030 dynamic power switching\n\nThe TWL4030/5030 family of multifunction devices allows board-specific\ncontrol of the the various regulators, clock and reset lines through\n\u0027scripts\u0027 that are loaded into its memory. This allows for Dynamic Power\nSwitching (DPS).\n\nImplement board-independent core support for DPS that is then used by\nboard-specific code to load custom DPS scripts.\n\nSigned-off-by: Amit Kucheria \u003camit.kucheria@verdurent.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "8238addcc52c94c59b10c3c1e9850d3a7921f825", "tree": "8b9ab9c7141406194eb82e09825d1d448addacd0", "parents": [ "0ad651c94c7a1f3706f63dc0174e681315e7dc81" ], "author": { "name": "Sascha Hauer", "email": "s.hauer@pengutronix.de", "time": "Wed Aug 19 01:40:28 2009 +0200" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:47:19 2009 +0200" }, "message": "mfd: Add Freescale MC13783 driver\n\nThis driver provides the core Freescale MC13783 support. It\nregisters the client platform_devices and provides access\nto the A/D converter.\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "956f25a6778a2510d52973ab8a3ac2e03e2c3704", "tree": "71a9627cd02f02091982459dd03af9f36a20c0c7", "parents": [ "35c86bf66d9d0ebc3f32f8c56251197b3921394e" ], "author": { "name": "Linus Walleij", "email": "linus.walleij@stericsson.com", "time": "Thu Aug 13 11:49:23 2009 +0200" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:47:15 2009 +0200" }, "message": "mfd: AB3100 accessor function cleanups\n\nThis adds the _interruptible suffix to the AB3100 accessor\nfunctions on par with mutex_lock_interruptible() that\u0027s used\nfor blocking simultaneous calls to the AB3100 acessor functions.\nSince these accesses are slow on a 100kHz I2C bus and may line\nup waiting for the mutex, we need to handle interruption by\nsystem shutdown or kill signals and may just as well denote that\nin the function names.\n\nSigned-off-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "d1c6b4fe668b2ae02f490deee86eaab60822a362", "tree": "d119501e8d501b3fd22e8f4d16f1ae893c54a98e", "parents": [ "e4ee831f949a7c7746a56bcf1e7ca057d6f69e2a" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Tue Jul 28 15:22:02 2009 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:47:09 2009 +0200" }, "message": "regulator: Add WM831x LDO support\n\nThe WM831x series of devices provide three types of LDO:\n\n - General purpose LDOs supporting voltages from 0.9-3.3V\n - High performance analogue LDOs supporting voltages from 1-3.5V\n - Very low power consumption LDOs intended to support always on\n functionality.\n\nThis patch adds support for all three kinds of LDO. Each regulator\nis probed as an individual platform device with resources used to\nprovide the register map location of the regulator. Mixed hardware\nand software control of regulators is not current supported.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "e4ee831f949a7c7746a56bcf1e7ca057d6f69e2a", "tree": "c1d0967c8e9dfd71c7f330949aa4dfa5f2aab24f", "parents": [ "be721979dd6b335e4ab6f83abb5cc11c33662aa8" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Tue Jul 28 15:21:49 2009 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:47:06 2009 +0200" }, "message": "regulator: Add WM831x DC-DC buck convertor support\n\nThe WM831x series of devices all have 3 DC-DC buck convertors. This\ndriver implements software control for these regulators via the\nregulator API. Use with split hardware/software control of individual\nregulators is not supported, though regulators not controlled by\nsoftware may be controlled via the hardware control interfaces.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "be721979dd6b335e4ab6f83abb5cc11c33662aa8", "tree": "f08095efe3c60c0388f111611e57a9d873fca6a9", "parents": [ "0c73b992dd4c645f050344cb13142c0fd3496824" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Tue Aug 04 20:09:52 2009 +0200" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:47:05 2009 +0200" }, "message": "regulator: Provide mode to status conversion function\n\nThis is useful for implementing get_status() in terms of get_mode().\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "0c73b992dd4c645f050344cb13142c0fd3496824", "tree": "64dc9705ea0efadb86e142e7f0cb1fbe36a9cf1c", "parents": [ "08bad5a821371548942aa13565831f18fe1875f3" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Tue Sep 15 12:07:12 2009 +0200" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:47:02 2009 +0200" }, "message": "input: Add support for the WM831x ON pin\n\nThe WM831x series of PMICs support control of initial power on\nthrough the ON pin on the device with soft control of the pin\nat other times. Represent this to userspace as KEY_POWER.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "e4b736f18f338daae141325c818187c4ab3e244c", "tree": "abe885fbfdf4f9f53165ba4ce8e4e0491e698182", "parents": [ "b11062b9c558695cd054f16c697e1db0988e2603" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Mon Jul 27 14:46:00 2009 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:47:01 2009 +0200" }, "message": "gpio: Add WM831X GPIO driver\n\nAdd support for the GPIO pins on the WM831x. No direct support is\ncurrently supplied for configuring non-gpiolib functionality such\nas pull configuration and alternate functions, soft configuration\nof these will be provided in a future patch.\n\nCurrently use of these pins as interrupts is not supported due to\nthe ongoing issues with generic irq not support interrupt controllers\non interrupt driven buses. Users can directly request the interrupts\nwith the wm831x-specific APIs currently provided if required.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "698659d5f78606c698781574773f433c60176e40", "tree": "11a8355b3e3a2aa6b912cd4b7966c5fa49b9c91c", "parents": [ "6704e5171ba9053ba173bcd807c7392d2076bdb4" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Mon Jul 27 14:45:57 2009 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:47:00 2009 +0200" }, "message": "mfd: Export ISEL values from WM831x core\n\nThe current settings which can be used with the WM831x current sinks\ncan\u0027t easily be mapped between register values and currents at run\ntime without a lookup table since the values scale logarithmically\nto match the way the human eye interprets brightness. This lookup\ntable is inclided in the core since several drivers need to use it.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "6704e5171ba9053ba173bcd807c7392d2076bdb4", "tree": "84f91270bdf1bfbefe2e059dec395d473cbd72d0", "parents": [ "63aed85e3535b4603798184cc941e49de386d354" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Mon Jul 27 14:45:56 2009 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:46:59 2009 +0200" }, "message": "mfd: Add basic WM831x OTP support\n\nThe WM831x series of devices use OTP (One Time Programmable, a type\nof PROM) to store system configuration. At run time this data is\nvisible via registers.\n\nCurrently the only explicitly supported feature is that the unique\nID provided by every WM831x device is exported to user space via\nsysfs. Other configuration data may be read by system-specific\ncode in the pre_init() and post_init() platform data operations.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "63aed85e3535b4603798184cc941e49de386d354", "tree": "9fadb2c68ec7702327b725043c2e214e0263a154", "parents": [ "7e9f9fd4b8285c52c0950a1929864346de5caa6d" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Mon Jul 27 14:45:55 2009 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:46:58 2009 +0200" }, "message": "mfd: Conditionally add WM831x backlight subdevice\n\nThe WM831x backlight driver requires at least the specification of the\ncurrent sink to use and a maximum current to allow them to function and\nwill actively interfere with other users of the regulators it uses if\nmisconfigured so only register the subdevice for it if this platform\ndata has been supplied.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "7e9f9fd4b8285c52c0950a1929864346de5caa6d", "tree": "d7e0f88f4f60e20a37b160a9555807c754849c74", "parents": [ "7d4d0a3e7343e3190afaa17253073db58e3d9bff" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Mon Jul 27 14:45:54 2009 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:46:58 2009 +0200" }, "message": "mfd: Add WM831x AUXADC support\n\nThe WM831x contains an auxiliary ADC with a number of switchable\ninputs which is used to monitor some of the voltages and\ntemperatures in the system and has some external inputs which can be\nused for machine specific purposes. Provide an API allowing drivers\nto read values from the ADC.\n\nAn internal reference voltage is provided to allow callibration of\nthe ADC. This is used to calibrate the device at startup.\n\nThe hardware also supports continuous readings and digital comparators.\nThese are not yet supported by the driver.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "7d4d0a3e7343e3190afaa17253073db58e3d9bff", "tree": "586ad0e591e512a567e90588a35670034fd2a6ff", "parents": [ "d2bedfe7a8b2f34beee2cad9cae74a088ee8ed07" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Mon Jul 27 14:45:53 2009 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:46:57 2009 +0200" }, "message": "mfd: Add WM831x interrupt support\n\nThe WM831x includes an interrupt controller managing interrupts for\nthe various functions on the chip. This patch adds support for the\ncore interrupt block on the device.\n\nIdeally this would be supported by genirq, particularly for the\nGPIOs, but currently genirq is unable to cope with controllers on\ninterrupt driven buses so we cut\u0027n\u0027paste the generic interface.\nOnce genirq is able to cope chips like this it should be a case\nof filing the prefixes off the code and redoing wm831x-irq.c to\nmove over.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "d2bedfe7a8b2f34beee2cad9cae74a088ee8ed07", "tree": "51b84067f1185887a8bb7f95f47240d8367864a5", "parents": [ "3bed6e415fc2cbf8d706848a62a48aebe84435e5" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Mon Jul 27 14:45:52 2009 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:46:57 2009 +0200" }, "message": "mfd: Initial core support for WM831x series devices\n\nThe WM831x series of devices are register compatible processor power\nmanagement subsystems, providing regulator and power path management\nfacilities along with other services like watchdog, RTC and touch\npanel controllers.\n\nThis patch adds very basic support, providing basic single register\nI2C access, handling of the security key and registration of the\ndevices.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "3bed6e415fc2cbf8d706848a62a48aebe84435e5", "tree": "c3f82bf4f2875d243cf6cd7d60bf2e568469af92", "parents": [ "f078237bcf6d5ffe322f6de7f05c0541989a8d35" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Mon Jul 27 14:45:51 2009 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:46:56 2009 +0200" }, "message": "mfd: Allow multiple MFD cells with the same name\n\nProvide basic support for MFDs having multiple cells of a given\ntype with different IDs by adding an id to the mfd_cell structure\nand then adding that to the id passed in to mfd_add_devices().\n\nAs it stands this approach requires that MFDs using this feature\ndeal with ensuring that there aren\u0027t any ID collisions resulting\nfrom multiple MFDs of the same type being instantiated. This needs\nto happen with the existing code too, but with this approach there\nis a knock on effect on the IDs for non-duplicated devices.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "327bc3a3efa408fb285948bfef112a6c58dfb375", "tree": "c5aa1c1504d8c4af2a04b3b8d3c4a51b5ecc4af5", "parents": [ "89a99e76f6888166edb145f576cc4a761ee0e0a9" ], "author": { "name": "Daniel Ribeiro", "email": "drwyrm@gmail.com", "time": "Fri Jul 31 12:38:02 2009 +0200" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:46:55 2009 +0200" }, "message": "mfd: Remove VIB defines from pcap header file\n\nVibrator will be accessed via the pcap-regulator driver, no need to expose its\nbits in the header file.\n\nSigned-off-by: Daniel Ribeiro \u003cdrwyrm@gmail.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "8d360d8c03e1e8514bbaf606b1cd3b818dfc445d", "tree": "3de7a017370019b845bce4d979aebde826090773", "parents": [ "bd8ef10261d7ae92ad2b4925afd2b56f46175c47" ], "author": { "name": "Paul Fertser", "email": "fercerpav@gmail.com", "time": "Tue Jul 28 01:09:04 2009 +0400" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:46:54 2009 +0200" }, "message": "mfd: fix wrong define for 10bit pcf50633 ADC mode\n\nThe 10 bits definition was the 8 bits one.\n\nSigned-off-by: Paul Fertser \u003cfercerpav@gmail.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "ed52e62ebec9e703eb0b69704feaf1b6e847d882", "tree": "71f81470bf569105a09f9b330bf68ba428236f06", "parents": [ "9c3664ddcee8d56c54bc6a735bbc3cf77723d85d" ], "author": { "name": "Paul Fertser", "email": "fercerpav@gmail.com", "time": "Tue Jul 28 00:41:15 2009 +0400" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:46:53 2009 +0200" }, "message": "mfd: use a dedicated workqueue for pcf50633 irq processing\n\nUsing the default kernel \"events\" workqueue causes problems with\nsynchronous adc readings if initiated from some task on the same\nworkqueue.\n\nI had a deadlock trying to use pcf50633_adc_sync_read from a\npower_supply class driver because the reading was initiated from the\nworkqueue and it waited for the irq processing to complete (to get the\nresult) and that was put on the same workqueue.\n\nSigned-off-by: Paul Fertser \u003cfercerpav@gmail.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "fb6c023a2b845df1ec383b74644ac35a4bbb76b6", "tree": "dbb8acdaa37c8ce80ee702a55f672476b6e45444", "parents": [ "39b1772a24126d74699cea623f96b50ca6b6f08f" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Mon Jul 20 12:43:45 2009 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:46:51 2009 +0200" }, "message": "hwmon: Add WM835x PMIC hardware monitoring driver\n\nThis driver provides reporting of the status supply voltage rails\nof the WM835x series of PMICs via the hwmon API.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "e9a22635b0d794d0cb242ffb0249f7b2a410bca2", "tree": "cb3447e0a44f5d1478d93b11476493031ccb59ee", "parents": [ "b1148fd46c248c8f6c9f3beb79f27cdd83702621" ], "author": { "name": "Daniel Ribeiro", "email": "drwyrm@gmail.com", "time": "Sat Jun 27 00:17:20 2009 -0300" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:46:47 2009 +0200" }, "message": "mfd: add ezx_pcap_setbits\n\nProvides an atomic set_bits functions, as needed by the pcap-regulator\ndriver.\n\nSigned-off-by: Daniel Ribeiro \u003cdrwyrm@gmail.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "ecd78cbdb989fd593bf4fd69cdb572200e70a553", "tree": "f09604e607e78fea4c42cb2a7ce10e3f627cf87e", "parents": [ "9f7b07d6cc3ed14783c9427a5b2a69794eb2de64" ], "author": { "name": "Daniel Ribeiro", "email": "drwyrm@gmail.com", "time": "Tue Jun 23 12:33:10 2009 -0300" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:46:46 2009 +0200" }, "message": "mfd: add set_ts_bits for pcap\n\nSome TS controller bits are on the same register as the ADC control, save\nTS specific bits and export a set_ts_bits function so the TS driver can set\nit with the adc_mutex lock held.\n\nSigned-off-by: Daniel Ribeiro \u003cdrwyrm@gmail.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "9f7b07d6cc3ed14783c9427a5b2a69794eb2de64", "tree": "c3793ad2c4318afa51f044f27c307017797a7d98", "parents": [ "dfc3aa7221f50bf3d05c67b826414ab290b95c46" ], "author": { "name": "Daniel Ribeiro", "email": "drwyrm@gmail.com", "time": "Tue Jun 23 12:32:11 2009 -0300" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:46:45 2009 +0200" }, "message": "mfd: Introduce irq_to_pcap()\n\nExport an irq_to_pcap function to get pcap irq number, for the keypad driver.\n\nSigned-off-by: Daniel Ribeiro \u003cdrwyrm@gmail.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "9c28cbccec66a5ca292c6659bf5a0fe0c8459fa7", "tree": "d43540ca30413ac8b3717e29f15ccbbe789a76c5", "parents": [ "19003c18e9b41f5c3aeb81c92356f90958e1f22f" ], "author": { "name": "Jan Kara", "email": "jack@suse.cz", "time": "Mon Aug 03 19:21:00 2009 +0200" }, "committer": { "name": "Jan Kara", "email": "jack@suse.cz", "time": "Wed Sep 16 17:44:10 2009 +0200" }, "message": "jbd: Journal block numbers can ever be only 32-bit use unsigned int for them\n\nIt does not make sense to store block number for journal as unsigned long\nsince they can be only 32-bit (because of on-disk format limitation). So\nchange in-memory structures and variables to use unsigned int instead.\n\nSigned-off-by: Jan Kara \u003cjack@suse.cz\u003e\n" }, { "commit": "ab86e5765d41a5eb4239a1c04d613db87bea5ed8", "tree": "a41224d4874c2f90e0b423786f00bedf6f3e8bfa", "parents": [ "7ea61767e41e2baedd6a968d13f56026522e1207", "2b2af54a5bb6f7e80ccf78f20084b93c398c3a8b" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Sep 16 08:27:10 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Sep 16 08:27:10 2009 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:\n Driver Core: devtmpfs - kernel-maintained tmpfs-based /dev\n debugfs: Modify default debugfs directory for debugging pktcdvd.\n debugfs: Modified default dir of debugfs for debugging UHCI.\n debugfs: Change debugfs directory of IWMC3200\n debugfs: Change debuhgfs directory of trace-events-sample.h\n debugfs: Fix mount directory of debugfs by default in events.txt\n hpilo: add poll f_op\n hpilo: add interrupt handler\n hpilo: staging for interrupt handling\n driver core: platform_device_add_data(): use kmemdup()\n Driver core: Add support for compatibility classes\n uio: add generic driver for PCI 2.3 devices\n driver-core: move dma-coherent.c from kernel to driver/base\n mem_class: fix bug\n mem_class: use minor as index instead of searching the array\n driver model: constify attribute groups\n UIO: remove \u0027default n\u0027 from Kconfig\n Driver core: Add accessor for device platform data\n Driver core: move dev_get/set_drvdata to drivers/base/dd.c\n Driver core: add new device to bus\u0027s list before probing\n" }, { "commit": "4406c56d0a4da7a37b9180abeaece6cd00bcc874", "tree": "65a85fa73a25d24cbed6d163fdcf8df1b934a0be", "parents": [ "6b7b352f2102e21f9d8f38e932f01d9c5705c073", "5e3573db2bd5db6925159279d99576a4635bdb66" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Sep 16 07:49:54 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Sep 16 07:49:54 2009 -0700" }, "message": "Merge branch \u0027linux-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6\n\n* \u0027linux-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (75 commits)\n PCI hotplug: clean up acpi_run_hpp()\n PCI hotplug: acpiphp: use generic pci_configure_slot()\n PCI hotplug: shpchp: use generic pci_configure_slot()\n PCI hotplug: pciehp: use generic pci_configure_slot()\n PCI hotplug: add pci_configure_slot()\n PCI hotplug: clean up acpi_get_hp_params_from_firmware() interface\n PCI hotplug: acpiphp: don\u0027t cache hotplug_params in acpiphp_bridge\n PCI hotplug: acpiphp: remove superfluous _HPP/_HPX evaluation\n PCI: Clear saved_state after the state has been restored\n PCI PM: Return error codes from pci_pm_resume()\n PCI: use dev_printk in quirk messages\n PCI / PCIe portdrv: Fix pcie_portdrv_slot_reset()\n PCI Hotplug: convert acpi_pci_detect_ejectable() to take an acpi_handle\n PCI Hotplug: acpiphp: find bridges the easy way\n PCI: pcie portdrv: remove unused variable\n PCI / ACPI PM: Propagate wake-up enable for devices w/o ACPI support\n ACPI PM: Replace wakeup.prepared with reference counter\n PCI PM: Introduce device flag wakeup_prepared\n PCI / ACPI PM: Rework some debug messages\n PCI PM: Simplify PCI wake-up code\n ...\n\nFixed up conflict in arch/powerpc/kernel/pci_64.c due to OF device tree\nscanning having been moved and merged for the 32- and 64-bit cases. The\n\u0027needs_freset\u0027 initialization added in 6e19314cc (\"PCI/powerpc: support\nPCIe fundamental reset\") is now in arch/powerpc/kernel/pci_of_scan.c.\n" }, { "commit": "182a85f8a119c789610a9d464f4129ded9f3c107", "tree": "ffc36e5049895bf85543ba8d0225805e15fe8d92", "parents": [ "5a9b86f647a56862cdc0a1362bfb015ae921af7f" ], "author": { "name": "Peter Zijlstra", "email": "a.p.zijlstra@chello.nl", "time": "Wed Sep 16 13:24:49 2009 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Wed Sep 16 16:44:33 2009 +0200" }, "message": "sched: Disable wakeup balancing\n\nSysbench thinks SD_BALANCE_WAKE is too agressive and kbuild doesn\u0027t\nreally mind too much, SD_BALANCE_NEWIDLE picks up most of the\nslack.\n\nOn a dual socket, quad core, dual thread nehalem system:\n\nsysbench (--num_threads\u003d16):\n\n SD_BALANCE_WAKE-: 13982 tx/s\n SD_BALANCE_WAKE+: 15688 tx/s\n\nkbuild (-j16):\n\n SD_BALANCE_WAKE-: 47.648295846 seconds time elapsed ( +- 0.312% )\n SD_BALANCE_WAKE+: 47.608607360 seconds time elapsed ( +- 0.026% )\n\n(same within noise)\n\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nLKML-Reference: \u003cnew-submission\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "b6e51316daede0633e9274e1e30391cfa4747877", "tree": "664476bb4e7c05dcce3ad908363b482134c68429", "parents": [ "bcddc3f01c9122882c8b9f12ab94a934e55aef97" ], "author": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Wed Sep 16 15:13:54 2009 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Wed Sep 16 15:18:52 2009 +0200" }, "message": "writeback: separate starting of sync vs opportunistic writeback\n\nbdi_start_writeback() is currently split into two paths, one for\nWB_SYNC_NONE and one for WB_SYNC_ALL. Add bdi_sync_writeback()\nfor WB_SYNC_ALL writeback and let bdi_start_writeback() handle\nonly WB_SYNC_NONE.\n\nPush down the writeback_control allocation and only accept the\nparameters that make sense for each function. This cleans up\nthe API considerably.\n\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "cfc4ba5365449cb6b5c9f68d755a142f17da1e47", "tree": "08770de9bb0e658f2e65abd4d10187b3e9f6bb1b", "parents": [ "f11fcae8401a3175f528e2f7917362645d570111" ], "author": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Mon Sep 14 13:12:40 2009 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Wed Sep 16 15:18:51 2009 +0200" }, "message": "writeback: use RCU to protect bdi_list\n\nNow that bdi_writeback_all() no longer handles integrity writeback,\nit doesn\u0027t have to block anymore. This means that we can switch\nbdi_list reader side protection to RCU.\n\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "32a88aa1b6dfb901cec64e1898cac78d0f25028a", "tree": "51aa6f56ccfca53f495d015645373317bdee3647", "parents": [ "c4a77a6c7dcff04a2abc7fe4b6b2ae605be41c5b" ], "author": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Wed Sep 16 15:02:33 2009 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Wed Sep 16 15:18:51 2009 +0200" }, "message": "fs: Assign bdi in super_block\n\nWe do this automatically in get_sb_bdev() from the set_bdev_super()\ncallback. Filesystems that have their own private backing_dev_info\nmust assign that in -\u003efill_super().\n\nNote that -\u003es_bdi assignment is required for proper writeback!\n\nAcked-by: Christoph Hellwig \u003chch@infradead.org\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "1fe06ad89255c211fe100d7f690d10b161398df8", "tree": "826d32bf081a6729aeaa08fe42422e49a9b86f6f", "parents": [ "2c96ce9f2084c1e04d02883e622f74a537a63aea" ], "author": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Tue Sep 15 15:10:20 2009 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Wed Sep 16 15:16:18 2009 +0200" }, "message": "writeback: get rid of wbc-\u003efor_writepages\n\nIt\u0027s only set, it\u0027s never checked. Kill it.\n\nAcked-by: Jan Kara \u003cjack@suse.cz\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "2c96ce9f2084c1e04d02883e622f74a537a63aea", "tree": "cad3c6773d2886103b05f7b090b3385d23076a03", "parents": [ "0cb583fd2862f19ea88b02eb307d11c09e51e2f8" ], "author": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Tue Sep 15 09:43:56 2009 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Wed Sep 16 15:16:18 2009 +0200" }, "message": "fs: remove bdev-\u003ebd_inode_backing_dev_info\n\nIt has been unused since it was introduced in:\n\ncommit 520808bf20e90fdbdb320264ba7dd5cf9d47dcac\nAuthor: Andrew Morton \u003cakpm@osdl.org\u003e\nDate: Fri May 21 00:46:17 2004 -0700\n\n [PATCH] block device layer: separate backing_dev_info infrastructure\n\nSo lets just kill it.\n\nAcked-by: Jan Kara \u003cjack@suse.cz\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "59abf02644c45f1591e1374ee7bb45dc757fcb88", "tree": "ce9cb0a4a57873b9d7d75cce4d28308019367192", "parents": [ "e69b0f1b41c0e57bb1e29100b5810a5914efcb45" ], "author": { "name": "Peter Zijlstra", "email": "a.p.zijlstra@chello.nl", "time": "Wed Sep 16 08:28:30 2009 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Wed Sep 16 08:42:40 2009 +0200" }, "message": "sched: Add SD_PREFER_LOCAL\n\nAnd turn it on for NUMA and MC domains. This improves\nlocality in balancing decisions by keeping up to\ncapacity amount of tasks local before looking for idle\nCPUs. (and twice the capacity if SD_POWERSAVINGS_BALANCE\nis set.)\n\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nLKML-Reference: \u003cnew-submission\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "ea88023b3491a384575ebcd5e8a449e841a28a24", "tree": "f46e3d8302e44dc55ce31823501e100472d29683", "parents": [ "a6f15ade97989d414e9bf33874c9d5d1f39808ec", "0cb583fd2862f19ea88b02eb307d11c09e51e2f8" ], "author": { "name": "Paul Mundt", "email": "lethal@linux-sh.org", "time": "Wed Sep 16 13:48:32 2009 +0900" }, "committer": { "name": "Paul Mundt", "email": "lethal@linux-sh.org", "time": "Wed Sep 16 13:48:32 2009 +0900" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6\n\nConflicts:\n\tarch/sh/kernel/vmlinux.lds.S\n" }, { "commit": "fe832a3a48737b24f95fab202b1c67fb588b071d", "tree": "333abe938711216a4400819c2bc658184a7398e1", "parents": [ "6ca6cca31ddc7cc8b1dc38b12d7593d2667defe8" ], "author": { "name": "Steven Rostedt", "email": "srostedt@redhat.com", "time": "Tue Sep 15 23:51:31 2009 -0400" }, "committer": { "name": "Steven Rostedt", "email": "rostedt@goodmis.org", "time": "Tue Sep 15 23:51:31 2009 -0400" }, "message": "tracing: remove notrace from __kprobes annotation\n\nWhen ftrace had issues with NMIs, it was needed to annotate all\nthe areas that kprobes had issues with notrace. Now that ftrace is\nNMI safe, the functions that limit ftrace from tracing are just a\nsmall few.\n\nKprobes is too big of a set for ftrace not to trace. Remove the\ncoupling.\n\nSigned-off-by: Steven Rostedt \u003crostedt@goodmis.org\u003e\n" }, { "commit": "0cb583fd2862f19ea88b02eb307d11c09e51e2f8", "tree": "740769ab145ed72af4d00ea8e4d55ebcef337fce", "parents": [ "723e9db7a46e328527cc3da2b478b831184fe828", "a2d10568fd3965fffeb29a3a6f29966dd3801727" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 15 10:01:16 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 15 10:01:16 2009 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6:\n ide: fixup for fujitsu disk\n ide: convert to -\u003eproc_fops\n at91_ide: remove headers specific for at91sam9263\n IDE: palm_bk3710: convert clock usage after clkdev conversion\n ide: fix races in handling of user-space SET XFER commands\n ide: allow ide_dev_read_id() to be called from the IRQ context\n ide: ide-taskfile.c fix style problems\n drivers/ide/ide-cd.c: Use DIV_ROUND_CLOSEST\n ide-tape: fix handling of postponed rqs\n ide-tape: convert to ide_debug_log macro\n ide-tape: fix debug call\n ide: Fix annoying warning in ide_pio_bytes().\n IDE: Save a call to PageHighMem()\n" }, { "commit": "723e9db7a46e328527cc3da2b478b831184fe828", "tree": "cdeda255633057dcb4c84097bed27b2bbf76970f", "parents": [ "ada3fa15057205b7d3f727bba5cd26b5912e350f", "d331d8305cba713605854aab63a000fb892353a7" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 15 09:51:09 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 15 09:51:09 2009 -0700" }, "message": "Merge branch \u0027next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc\n\n* \u0027next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (134 commits)\n powerpc/nvram: Enable use Generic NVRAM driver for different size chips\n powerpc/iseries: Fix oops reading from /proc/iSeries/mf/*/cmdline\n powerpc/ps3: Workaround for flash memory I/O error\n powerpc/booke: Don\u0027t set DABR on 64-bit BookE, use DAC1 instead\n powerpc/perf_counters: Reduce stack usage of power_check_constraints\n powerpc: Fix bug where perf_counters breaks oprofile\n powerpc/85xx: Fix SMP compile error and allow NULL for smp_ops\n powerpc/irq: Improve nanodoc\n powerpc: Fix some late PowerMac G5 with PCIe ATI graphics\n powerpc/fsl-booke: Use HW PTE format if CONFIG_PTE_64BIT\n powerpc/book3e: Add missing page sizes\n powerpc/pseries: Fix to handle slb resize across migration\n powerpc/powermac: Thermal control turns system off too eagerly\n powerpc/pci: Merge ppc32 and ppc64 versions of phb_scan()\n powerpc/405ex: support cuImage via included dtb\n powerpc/405ex: provide necessary fixup function to support cuImage\n powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC\n powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support.\n powerpc/44x: Update Arches defconfig\n powerpc/44x: Update Arches dts\n ...\n\nFix up conflicts in drivers/char/agp/uninorth-agp.c\n" }, { "commit": "2b2af54a5bb6f7e80ccf78f20084b93c398c3a8b", "tree": "bb27e3b16a2a8fadeea869033a406f0a19b63e29", "parents": [ "ea5ffff57dce2f4c85ab056f4b0a202f71db2bdf" ], "author": { "name": "Kay Sievers", "email": "kay.sievers@vrfy.org", "time": "Thu Apr 30 15:23:42 2009 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Tue Sep 15 09:50:49 2009 -0700" }, "message": "Driver Core: devtmpfs - kernel-maintained tmpfs-based /dev\n\nDevtmpfs lets the kernel create a tmpfs instance called devtmpfs\nvery early at kernel initialization, before any driver-core device\nis registered. Every device with a major/minor will provide a\ndevice node in devtmpfs.\n\nDevtmpfs can be changed and altered by userspace at any time,\nand in any way needed - just like today\u0027s udev-mounted tmpfs.\nUnmodified udev versions will run just fine on top of it, and will\nrecognize an already existing kernel-created device node and use it.\nThe default node permissions are root:root 0600. Proper permissions\nand user/group ownership, meaningful symlinks, all other policy still\nneeds to be applied by userspace.\n\nIf a node is created by devtmps, devtmpfs will remove the device node\nwhen the device goes away. If the device node was created by\nuserspace, or the devtmpfs created node was replaced by userspace, it\nwill no longer be removed by devtmpfs.\n\nIf it is requested to auto-mount it, it makes init\u003d/bin/sh work\nwithout any further userspace support. /dev will be fully populated\nand dynamic, and always reflect the current device state of the kernel.\nWith the commonly used dynamic device numbers, it solves the problem\nwhere static devices nodes may point to the wrong devices.\n\nIt is intended to make the initial bootup logic simpler and more robust,\nby de-coupling the creation of the inital environment, to reliably run\nuserspace processes, from a complex userspace bootstrap logic to provide\na working /dev.\n\nSigned-off-by: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\nSigned-off-by: Jan Blunck \u003cjblunck@suse.de\u003e\nTested-By: Harald Hoyer \u003charald@redhat.com\u003e\nTested-By: Scott James Remnant \u003cscott@ubuntu.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "4622709445705c1e423d2addcfd8ccae052fe0ba", "tree": "c9032374e8f99a5bb9b8b8e012e0a6de4c9c3846", "parents": [ "ccb86a6907c9ba7b5be5f521362fc308e80bed34" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Aug 04 12:55:34 2009 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Tue Sep 15 09:50:48 2009 -0700" }, "message": "Driver core: Add support for compatibility classes\n\nWhen turning class devices into bus devices, we may need to\ntemporarily add links in sysfs so that user-space applications\nare not confused. This is done by adding the following API:\n\n* Functions to register and unregister compatibility classes.\n These appear in sysfs at the same location as regular classes, but\n instead of class devices, they contain links to bus devices.\n* Functions to create and delete such links. Additionally, the caller\n can optionally pass a target device to which a \"device\" link should\n point (typically that would be the device\u0027s parent), to fully emulate\n the original class device.\n\nThe i2c subsystem will be the first user of this API, as i2c adapters\nare being converted from class devices to bus devices.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\n\n" }, { "commit": "ccb86a6907c9ba7b5be5f521362fc308e80bed34", "tree": "e10f409f582a50243124d9b8bf38b2ec8be8d5ac", "parents": [ "a56af87648054089d89874b52e3fc23ed4f274ad" ], "author": { "name": "Michael S. Tsirkin", "email": "mst@redhat.com", "time": "Mon Jul 20 10:29:34 2009 +0300" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Tue Sep 15 09:50:48 2009 -0700" }, "message": "uio: add generic driver for PCI 2.3 devices\n\nThis adds a generic uio driver that can bind to any PCI device. First\nuser will be virtualization where a qemu userspace process needs to give\nguest OS access to the device.\n\nInterrupts are handled using the Interrupt Disable bit in the PCI\ncommand register and Interrupt Status bit in the PCI status register.\nAll devices compliant to PCI 2.3 (circa 2002) and all compliant PCI\nExpress devices should support these bits. Driver detects this support,\nand won\u0027t bind to devices which do not support the Interrupt Disable Bit\nin the command register.\n\nIt\u0027s expected that more features of interest to virtualization will be\nadded to this driver in the future. Possibilities are: mmap for device\nresources, MSI/MSI-X, eventfd (to interface with kvm), iommu.\n\nSigned-off-by: Michael S. Tsirkin \u003cmst@redhat.com\u003e\nAcked-by: Chris Wright \u003cchrisw@redhat.com\u003e\nSigned-off-by: Hans J. Koch \u003chjk@linutronix.de\u003e\nAcked-by: Jesse Barnes \u003cjbarnes@virtuousgeek.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n\n" }, { "commit": "a4dbd6740df0872cdf0a86841f75beec8381964d", "tree": "1093687845d89f8397d61e7df1ad8546a5a25225", "parents": [ "5b2ea2f10dbb2fa91d8033993000f8664309395f" ], "author": { "name": "David Brownell", "email": "dbrownell@users.sourceforge.net", "time": "Wed Jun 24 10:06:31 2009 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Tue Sep 15 09:50:47 2009 -0700" }, "message": "driver model: constify attribute groups\n\nLet attribute group vectors be declared \"const\". We\u0027d\nlike to let most attribute metadata live in read-only\nsections... this is a start.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "a5b8b1ada6dd76503884f5492b995cd29eefae0f", "tree": "5fce8cc942c686fb1ce73a4c714581c389606258", "parents": [ "b4028437876866aba4747a655ede00f892089e14" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Fri Jul 17 15:06:08 2009 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Tue Sep 15 09:50:47 2009 -0700" }, "message": "Driver core: Add accessor for device platform data\n\nFor consistency with driver data provide a dev_get_platdata() accessor\nfor reading the platform data from a device.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "b4028437876866aba4747a655ede00f892089e14", "tree": "f6c34315c3e6d2899a894f028bd6f9899e80cd01", "parents": [ "2023c610dc54a4f4130b0494309a9bd668ca3df8" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Mon May 11 14:16:57 2009 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Tue Sep 15 09:50:47 2009 -0700" }, "message": "Driver core: move dev_get/set_drvdata to drivers/base/dd.c\n\nNo one should directly access the driver_data field, so remove the field\nand make it private. We dynamically create the private field now if it\nis needed, to handle drivers that call get/set before they are\nregistered with the driver core.\n\nAlso update the copyright notices on these files while we are there.\n\nCc: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "ada3fa15057205b7d3f727bba5cd26b5912e350f", "tree": "60962fc9e4021b92f484d1a58e72cd3906d4f3db", "parents": [ "2f82af08fcc7dc01a7e98a49a5995a77e32a2925", "5579fd7e6aed8860ea0c8e3f11897493153b10ad" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 15 09:39:44 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 15 09:39:44 2009 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (46 commits)\n powerpc64: convert to dynamic percpu allocator\n sparc64: use embedding percpu first chunk allocator\n percpu: kill lpage first chunk allocator\n x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA\n percpu: update embedding first chunk allocator to handle sparse units\n percpu: use group information to allocate vmap areas sparsely\n vmalloc: implement pcpu_get_vm_areas()\n vmalloc: separate out insert_vmalloc_vm()\n percpu: add chunk-\u003ebase_addr\n percpu: add pcpu_unit_offsets[]\n percpu: introduce pcpu_alloc_info and pcpu_group_info\n percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward\n percpu: add @align to pcpu_fc_alloc_fn_t\n percpu: make @dyn_size mandatory for pcpu_setup_first_chunk()\n percpu: drop @static_size from first chunk allocators\n percpu: generalize first chunk allocator selection\n percpu: build first chunk allocators selectively\n percpu: rename 4k first chunk allocator to page\n percpu: improve boot messages\n percpu: fix pcpu_reclaim() locking\n ...\n\nFix trivial conflict as by Tejun Heo in kernel/sched.c\n" }, { "commit": "2f82af08fcc7dc01a7e98a49a5995a77e32a2925", "tree": "d505fe5936881b137b82b59360646a6988e506ba", "parents": [ "f199fd990639f93d07d8e104b0a66aabaf01d67d" ], "author": { "name": "Nicolas Pitre", "email": "nico@fluxnic.net", "time": "Mon Sep 14 03:25:28 2009 -0400" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 15 09:37:12 2009 -0700" }, "message": "Nicolas Pitre has a new email address\n\nDue to problems at cam.org, my nico@cam.org email address is no longer\nvalid. FRom now on, nico@fluxnic.net should be used instead.\n\nSigned-off-by: Nicolas Pitre \u003cnico@fluxnic.net\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "043fe50f8085c12651c96f04576eae4d8a22f3d8", "tree": "214b4f985ce7d3b1a4961620e2c2f4f5f06e1c35", "parents": [ "227423904c709a8e60245c97081bbeb4fb500655", "ea47689e74a1637fac4f5fc44890f3662c976849" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 15 09:22:18 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 15 09:22:18 2009 -0700" }, "message": "Merge branch \u0027for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6\n\n* \u0027for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (213 commits)\n V4L/DVB (12720): em28xx-cards: Add vendor/product id for Kworld DVD Maker 2\n V4L/DVB (12713): em28xx: Cleanups at ir_i2c handler\n V4L/DVB (12712): em28xx: properly load ir-kbd-i2c when needed\n V4L/DVB (12701): saa7134: ir-kbd-i2c init data needs a persistent object\n V4L/DVB (12699): cx18: ir-kbd-i2c initialization data should point to a persistent object\n V4L/DVB (12698): em28xx: ir-kbd-i2c init data needs a persistent object\n V4L/DVB (12707): gspca - sn9c20x: Add SXGA support to MT9M111\n V4L/DVB (12706): gspca - sn9c20x: disable exposure/gain controls for MT9M111 sensors.\n V4L/DVB (12705): gspca - sn9c20x: Add SXGA support to SOI968\n V4L/DVB (12703): gspca - sn9c20x: Reduces size of object\n V4L/DVB (12704): gspca - sn9c20x: Fix exposure on SOI968 sensors\n V4L/DVB (12696): gspca - sonixj / sn9c102: Two drivers for 0c45:60fc and 0c45:613e.\n V4L/DVB (12695): gspca - vc032x: Do the LED work with the sensor hv7131r.\n V4L/DVB (12694): gspca - vc032x: Change the start exchanges of the sensor hv7131r.\n V4L/DVB (12693): gspca - sunplus: The brightness is signed.\n V4L/DVB (12692): gspca - sunplus: Optimize code.\n V4L/DVB (12691): gspca - sonixj: Don\u0027t use mdelay().\n V4L/DVB (12690): gspca - pac7311: Webcam 06f8:3009 added.\n V4L/DVB (12686): dvb-core: check supported QAM modulations\n V4L/DVB (12685): dvb-core: check fe-\u003eops.set_frontend return value\n ...\n" }, { "commit": "227423904c709a8e60245c97081bbeb4fb500655", "tree": "97db1b8df1e4518334aea2fdf60363e0a691eb1e", "parents": [ "1aaf2e59135fd67321f47c11c64a54aac27014e9", "fa526d0d641b5365676a1fb821ce359e217c9b85" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 15 09:19:38 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 15 09:19:38 2009 -0700" }, "message": "Merge branch \u0027x86-pat-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027x86-pat-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n x86, pat: Fix cacheflush address in change_page_attr_set_clr()\n mm: remove !NUMA condition from PAGEFLAGS_EXTENDED condition set\n x86: Fix earlyprintk\u003ddbgp for machines without NX\n x86, pat: Sanity check remap_pfn_range for RAM region\n x86, pat: Lookup the protection from memtype list on vm_insert_pfn()\n x86, pat: Add lookup_memtype to get the current memtype of a paddr\n x86, pat: Use page flags to track memtypes of RAM pages\n x86, pat: Generalize the use of page flag PG_uncached\n x86, pat: Add rbtree to do quick lookup in memtype tracking\n x86, pat: Add PAT reserve free to io_mapping* APIs\n x86, pat: New i/f for driver to request memtype for IO regions\n x86, pat: ioremap to follow same PAT restrictions as other PAT users\n x86, pat: Keep identity maps consistent with mmaps even when pat_disabled\n x86, mtrr: make mtrr_aps_delayed_init static bool\n x86, pat/mtrr: Rendezvous all the cpus for MTRR/PAT init\n generic-ipi: Allow cpus not yet online to call smp_call_function with irqs disabled\n x86: Fix an incorrect argument of reserve_bootmem()\n x86: Fix system crash when loading with \"reservetop\" parameter\n" }, { "commit": "1aaf2e59135fd67321f47c11c64a54aac27014e9", "tree": "633ffa4db3ac6e8d566cba549510561ffd61d8f4", "parents": [ "66a4fe0cb80a9fde8cb173289afb863fd279466a", "936e894a976dd3b0f07f1f6f43c17b77b7e6146d" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 15 09:19:20 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 15 09:19:20 2009 -0700" }, "message": "Merge branch \u0027x86-txt-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip\n\n* \u0027x86-txt-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:\n x86, intel_txt: clean up the impact on generic code, unbreak non-x86\n x86, intel_txt: Handle ACPI_SLEEP without X86_TRAMPOLINE\n x86, intel_txt: Fix typos in Kconfig help\n x86, intel_txt: Factor out the code for S3 setup\n x86, intel_txt: tboot.c needs \u003casm/fixmap.h\u003e\n intel_txt: Force IOMMU on for Intel TXT launch\n x86, intel_txt: Intel TXT Sx shutdown support\n x86, intel_txt: Intel TXT reboot/halt shutdown support\n x86, intel_txt: Intel TXT boot support\n" }, { "commit": "66a4fe0cb80a9fde8cb173289afb863fd279466a", "tree": "e1180ba7cbd123fb2f0bf510a955704725465776", "parents": [ "18240904960a39e582ced8ba8ececb10b8c22dd3", "121264827656f5f06328b17983c796af17dc5949" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 15 09:18:07 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 15 09:18:07 2009 -0700" }, "message": "Merge branch \u0027agp-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6\n\n* \u0027agp-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:\n agp/intel: remove restore in resume\n agp: fix uninorth build\n intel-agp: Set dma mask for i915\n agp: kill phys_to_gart() and gart_to_phys()\n intel-agp: fix sglist allocation to avoid vmalloc()\n intel-agp: Move repeated sglist free into separate function\n agp: Switch agp_{un,}map_page() to take struct page * argument\n agp: tidy up handling of scratch pages w.r.t. DMA API\n intel_agp: Use PCI DMA API correctly on chipsets new enough to have IOMMU\n agp: Add generic support for graphics dma remapping\n agp: Switch mask_memory() method to take address argument again, not page\n" }, { "commit": "a7558e01056f5191ff2ecff53b075dcb9e484188", "tree": "1364bbf9273ce353f4f3146aebe567f79b7c8cad", "parents": [ "7d47872146398dbede13223299fe1cb368ebc781" ], "author": { "name": "Peter Zijlstra", "email": "a.p.zijlstra@chello.nl", "time": "Mon Sep 14 20:02:34 2009 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Tue Sep 15 16:51:31 2009 +0200" }, "message": "sched: Add WF_FORK\n\nAvoid the cache buddies from biasing the time distribution away\nfrom fork()ers. Normally the next buddy will be the preferred\nscheduling target, but this makes fork()s prefer to run the new\nchild, whereas we prefer to run the parent, since that will\ngenerate more work.\n\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nLKML-Reference: \u003cnew-submission\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "7d47872146398dbede13223299fe1cb368ebc781", "tree": "c472424ecbabdb8136e2b93f49f75af9414f03f3", "parents": [ "0763a660a84220cc3900fd32abdd7ad109e2278d" ], "author": { "name": "Peter Zijlstra", "email": "a.p.zijlstra@chello.nl", "time": "Mon Sep 14 19:55:44 2009 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Tue Sep 15 16:51:30 2009 +0200" }, "message": "sched: Rename sync arguments\n\nIn order to extend the functions to have more than 1 flag (sync),\nrename the argument to flags, and explicitly define a WF_ space for\nindividual flags.\n\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nLKML-Reference: \u003cnew-submission\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "0763a660a84220cc3900fd32abdd7ad109e2278d", "tree": "1b745884fb79627e05c026ee5bfb115b1f722db8", "parents": [ "8e6598af3f35629c37249a610cf13e73f70db279" ], "author": { "name": "Peter Zijlstra", "email": "a.p.zijlstra@chello.nl", "time": "Mon Sep 14 19:37:39 2009 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Tue Sep 15 16:51:29 2009 +0200" }, "message": "sched: Rename select_task_rq() argument\n\nIn order to be able to rename the sync argument, we need to rename\nthe current flag argument.\n\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nLKML-Reference: \u003cnew-submission\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "47fe38fcff0517e67d395c039d2e26d2de688a60", "tree": "ada38f4e1aa644354b9de4c2cb128719e9e64a9e", "parents": [ "5cbc19a983141729d716be17197028434127b376" ], "author": { "name": "Peter Zijlstra", "email": "a.p.zijlstra@chello.nl", "time": "Wed Sep 02 13:49:18 2009 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Tue Sep 15 16:51:27 2009 +0200" }, "message": "x86: sched: Provide arch implementations using aperf/mperf\n\nAPERF/MPERF support for cpu_power.\n\nAPERF/MPERF is arch defined to be a relative scale of work capacity\nper logical cpu, this is assumed to include SMT and Turbo mode.\n\nAPERF/MPERF are specified to both reset to 0 when either counter\nwraps, which is highly inconvenient, since that\u0027ll give a blimp\nwhen that happens. The manual specifies writing 0 to the counters\nafter each read, but that\u0027s 1) too expensive, and 2) destroys the\npossibility of sharing these counters with other users, so we live\nwith the blimp - the other existing user does too.\n\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nLKML-Reference: \u003cnew-submission\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "b8a543ea5a5896830a9969bacfd047f9d15940b2", "tree": "45bae76596f2a51f3cc79d55c9c4e0da064a7a2c", "parents": [ "0ec9fab3d186d9cbb00c0f694d4a260d07c198d9" ], "author": { "name": "Peter Zijlstra", "email": "a.p.zijlstra@chello.nl", "time": "Tue Sep 15 15:22:03 2009 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Tue Sep 15 16:51:23 2009 +0200" }, "message": "sched: Reduce forkexec_idx\n\nIf we\u0027re looking to place a new task, we might as well find the\nidlest position _now_, not 1 tick ago.\n\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nLKML-Reference: \u003cnew-submission\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "0ec9fab3d186d9cbb00c0f694d4a260d07c198d9", "tree": "07773edcece2dd82a63265e027793fe8b2231960", "parents": [ "6bd7821f905a8d6c471f0d6675f5cb7ea448d791" ], "author": { "name": "Mike Galbraith", "email": "efault@gmx.de", "time": "Tue Sep 15 15:07:03 2009 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Tue Sep 15 16:51:16 2009 +0200" }, "message": "sched: Improve latencies and throughput\n\nMake the idle balancer more agressive, to improve a\nx264 encoding workload provided by Jason Garrett-Glaser:\n\n NEXT_BUDDY NO_LB_BIAS\n encoded 600 frames, 252.82 fps, 22096.60 kb/s\n encoded 600 frames, 250.69 fps, 22096.60 kb/s\n encoded 600 frames, 245.76 fps, 22096.60 kb/s\n\n NO_NEXT_BUDDY LB_BIAS\n encoded 600 frames, 344.44 fps, 22096.60 kb/s\n encoded 600 frames, 346.66 fps, 22096.60 kb/s\n encoded 600 frames, 352.59 fps, 22096.60 kb/s\n\n NO_NEXT_BUDDY NO_LB_BIAS\n encoded 600 frames, 425.75 fps, 22096.60 kb/s\n encoded 600 frames, 425.45 fps, 22096.60 kb/s\n encoded 600 frames, 422.49 fps, 22096.60 kb/s\n\nPeter pointed out that this is better done via newidle_idx,\nnot via LB_BIAS, newidle balancing should look for where\nthere is load _now_, not where there was load 2 ticks ago.\n\nWorst-case latencies are improved as well as no buddies\nmeans less vruntime spread. (as per prior lkml discussions)\n\nThis change improves kbuild-peak parallelism as well.\n\nReported-by: Jason Garrett-Glaser \u003cdarkshikari@gmail.com\u003e\nSigned-off-by: Mike Galbraith \u003cefault@gmx.de\u003e\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nLKML-Reference: \u003c1253011667.9128.16.camel@marge.simson.net\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "6bd7821f905a8d6c471f0d6675f5cb7ea448d791", "tree": "edf79a70823c3f6903d4a6a3406f36078a19199b", "parents": [ "78e7ed53c9f42f04f9401ada6f7047db60781676" ], "author": { "name": "Peter Zijlstra", "email": "a.p.zijlstra@chello.nl", "time": "Fri Sep 11 18:42:15 2009 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Tue Sep 15 16:01:08 2009 +0200" }, "message": "sched: Fix some domain tunings\n\nCPU level should have WAKE_AFFINE, whereas ALLNODES is dubious.\n\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nLKML-Reference: \u003cnew-submission\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "78e7ed53c9f42f04f9401ada6f7047db60781676", "tree": "24f45333ce4479b27c96b425c7d09c080a26609f", "parents": [ "d7c33c4930f569caf6b2ece597432853c4151a45" ], "author": { "name": "Peter Zijlstra", "email": "a.p.zijlstra@chello.nl", "time": "Thu Sep 03 13:16:51 2009 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Tue Sep 15 16:01:07 2009 +0200" }, "message": "sched: Tweak wake_idx\n\nWhen merging select_task_rq_fair() and sched_balance_self() we lost\nthe use of wake_idx, restore that and set them to 0 to make wake\nbalancing more aggressive.\n\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nLKML-Reference: \u003cnew-submission\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "c88d5910890ad35af283344417891344604f0438", "tree": "4e2025d569c3e03a7ec5163f0a9bc159114ee14e", "parents": [ "e9c8431185d6c406887190519f6dbdd112641686" ], "author": { "name": "Peter Zijlstra", "email": "a.p.zijlstra@chello.nl", "time": "Thu Sep 10 13:50:02 2009 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Tue Sep 15 16:01:05 2009 +0200" }, "message": "sched: Merge select_task_rq_fair() and sched_balance_self()\n\nThe problem with wake_idle() is that is doesn\u0027t respect things like\ncpu_power, which means it doesn\u0027t deal well with SMT nor the recent\nRT interaction.\n\nTo cure this, it needs to do what sched_balance_self() does, which\nleads to the possibility of merging select_task_rq_fair() and\nsched_balance_self().\n\nModify sched_balance_self() to:\n\n - update_shares() when walking up the domain tree,\n (it only called it for the top domain, but it should\n have done this anyway), which allows us to remove\n this ugly bit from try_to_wake_up().\n\n - do wake_affine() on the smallest domain that contains\n both this (the waking) and the prev (the wakee) cpu for\n WAKE invocations.\n\nThen use the top-down balance steps it had to replace wake_idle().\n\nThis leads to the dissapearance of SD_WAKE_BALANCE and\nSD_WAKE_IDLE_FAR, with SD_WAKE_IDLE replaced with SD_BALANCE_WAKE.\n\nSD_WAKE_AFFINE needs SD_BALANCE_WAKE to be effective.\n\nTouch all topology bits to replace the old with new SD flags --\nplatforms might need re-tuning, enabling SD_BALANCE_WAKE\nconditionally on a NUMA distance seems like a good additional\nfeature, magny-core and small nehalem systems would want this\nenabled, systems with slow interconnects would not.\n\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nLKML-Reference: \u003cnew-submission\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "e9c8431185d6c406887190519f6dbdd112641686", "tree": "3c502201451df7bbfcd653fee940fcb40bdaaeb6", "parents": [ "5f3edc1b1ead6d9bd45a85c551f44eff8fe76b9f" ], "author": { "name": "Peter Zijlstra", "email": "a.p.zijlstra@chello.nl", "time": "Tue Sep 15 14:43:03 2009 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Tue Sep 15 16:01:05 2009 +0200" }, "message": "sched: Add TASK_WAKING\n\nWe\u0027re going to want to drop rq-\u003elock in try_to_wake_up() for a\nlonger period of time, however we also want to deal with concurrent\nwaking of the same task, which is currently handled by holding\nrq-\u003elock.\n\nSo introduce a new TASK state, namely TASK_WAKING, which indicates\nsomeone is already waking the task (other wakers will fail p-\u003estate\n\u0026 state).\n\nWe also keep preemption disabled over the whole ttwu().\n\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nLKML-Reference: \u003cnew-submission\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "5f3edc1b1ead6d9bd45a85c551f44eff8fe76b9f", "tree": "46f987010ca017be945831b76d8ea846f1ba8fc9", "parents": [ "aaee1203ca52b9db799433c33c9bffc33cdf8909" ], "author": { "name": "Peter Zijlstra", "email": "a.p.zijlstra@chello.nl", "time": "Thu Sep 10 13:42:00 2009 +0200" }, "committer": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Tue Sep 15 16:01:04 2009 +0200" }, "message": "sched: Hook sched_balance_self() into sched_class::select_task_rq()\n\nRather ugly patch to fully place the sched_balance_self() code\ninside the fair class.\n\nSigned-off-by: Peter Zijlstra \u003ca.p.zijlstra@chello.nl\u003e\nLKML-Reference: \u003cnew-submission\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "8b815477f382f96deefbe5bd4404fa7b31cf5dcf", "tree": "3fe4fd85003fcf7b730c5d2651aab3f11642faae", "parents": [ "531afd64d027e3d798c416b2b37b3cfb1de417d9" ], "author": { "name": "David Howells", "email": "dhowells@redhat.com", "time": "Mon Sep 14 01:17:30 2009 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Sep 15 02:44:17 2009 -0700" }, "message": "RxRPC: Declare the security index constants symbolically\n\nDeclare the security index constants symbolically rather than just referring\nto them numerically.\n\nSigned-off-by: David Howells \u003cdhowells@redhat.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" } ], "next": "29a020d35f629619c67fa5e32acaaac3f8a1ba90" }