)]}' { "log": [ { "commit": "f0d44ae310bc8eb0b6694e257015d8b24e1a357c", "tree": "5687fbe1f5c7e2eeaa55de384b58f0764fae6ab8", "parents": [ "f17f5c91ae3bfeb5cfc37fa132a5fdfceb8927be" ], "author": { "name": "Anton Vorontsov", "email": "avorontsov@ru.mvista.com", "time": "Wed Jan 14 14:38:02 2009 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Jan 14 14:38:02 2009 -0800" }, "message": "phylib: Fix Freescale TBI PHY detection\n\nFreescale on-chip TBI PHYs reports PHY ID as 0x0, but as of\n\ncommit 3ee82383f0098a2e13acc8cf1be8e47512f41e5a\nAuthor: Giulio Benetti \u003cgiulio.benetti@micronovasrl.com\u003e\nDate: Thu Nov 13 21:53:13 2008 +0000\n\n phy: fix phy address bug\n\n PHYID returns 0xffff and not 0xffffffff when not found and in some\n case(at91sam9263) 0x0. Maybe this patch could be useful.\n\nphy_device.c treats PHY ID \u003d\u003d 0x0 as bogus IDs, and that results in\ngianfar driver failure to see the TBI PHYs. This code snippet triggers:\n\n\tif (!priv-\u003etbiphy) {\n\t\tprintk(KERN_WARNING \"SGMII mode requires that the device \"\n\t\t\t\t\"tree specify a tbi-handle\\n\");\n\t\treturn;\n\t}\n\nAlthough tbi-handle is specified in the device tree.\n\nBtw, technically PHY ID \u003d\u003d 0x0 is a valid ID (if we ever see a PHY\nmanufactured by Xerox :-).\n\nSigned-off-by: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nAcked-by: Andy Fleming \u003cafleming@freescale.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "161c8d2f50109b44b664eaf23831ea1587979a61", "tree": "1d9b2b4aaa72296f98c449e6f955ade61e84ed02", "parents": [ "f7d1b9f5aafa371d7f51f644aa3c38bc914e9205" ], "author": { "name": "Krzysztof Halasa", "email": "khc@pm.waw.pl", "time": "Thu Dec 25 16:50:41 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Dec 25 16:50:41 2008 -0800" }, "message": "net: PHYLIB mdio fixes #2\n\nThe PHYLIB mdio code has more problems in error paths:\n- mdiobus_release can be called before bus-\u003estate is set to\n MDIOBUS_REGISTERED\n- mdiobus_scan allocates resources which need to be freed\n- the comment is wrong, the resistors used are actually pull-ups.\n\nSigned-off-by: Krzysztof Halasa \u003ckhc@pm.waw.pl\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "6332178d91ca1a9dbd99bd97cabbcf965d178e9f", "tree": "d98af2cbc7ff0e9e4d00b6cc8c79b05ca7815a5f", "parents": [ "908a7a16b852ffd618a9127be8d62432182d81b4", "739840d529eb7505d3cbfe9d468bf1440c9a8e27" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Dec 23 17:56:23 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Dec 23 17:56:23 2008 -0800" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\n\tdrivers/net/ppp_generic.c\n" }, { "commit": "e8e5752dc0a56a01527055b0c37510b1d6b6b861", "tree": "65066b89fe67651445f25d586db615c3fbbcf81c", "parents": [ "9a3de25544dadab1971847f28f33b1cd0d1770a6" ], "author": { "name": "Krzysztof Halasa", "email": "khc@pm.waw.pl", "time": "Wed Dec 17 00:24:13 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Dec 17 00:24:13 2008 -0800" }, "message": "net: kernel BUG at drivers/net/phy/mdio_bus.c:165!\n\nkernel BUG at drivers/net/phy/mdio_bus.c:165!\nUnable to handle kernel NULL pointer dereference at virtual address 00000000\n\nHow?\n\nmdiobus_alloc() sets bus-\u003estate \u003d MDIOBUS_ALLOCATED.\n\nmdiobus_register() sets bus-\u003estate \u003d MDIOBUS_REGISTERED but then can\n fail (mdiobus_scan()) returning an error to the caller.\n\nThe caller aborts correctly with mdiobus_free() which does:\n if (bus-\u003estate \u003d\u003d MDIOBUS_ALLOCATED) {\n kfree(bus);\n return;\n }\n\n BUG_ON(bus-\u003estate !\u003d MDIOBUS_UNREGISTERED);\n\nSigned-off-by: Krzysztof Halasa \u003ckhc@pm.waw.pl\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "f162e97d778ec29492be8eb9bbecb65be976b7c8", "tree": "4887390602c252537417a602a4478fafe3106047", "parents": [ "5a5efed4817ef931f648b118aeb9222e53122d2b" ], "author": { "name": "Andy Fleming", "email": "afleming@freescale.com", "time": "Tue Dec 16 15:39:48 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Dec 16 15:39:48 2008 -0800" }, "message": "phylib: Remove unnecessary \"reset\" fixups in genphy_setup_forced\n\ngenphy_setup_forced hasn\u0027t actually reset the PHY for a long time,\nbut a comment to that effect remained in the code, so code continued\nto act as if it *had* reset the PHY, and called the necessary fixup\nfunctions to respond to a PHY reset. With no reset, those functions\nare no longer needed, so we remove them.\n\nSigned-off-by: Andy Fleming \u003cafleming@freescale.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "dbb7a95d810ab76aac42e1a5cefdf069dcd014a1", "tree": "d9dbe0812b74430f5f3130f9950a046b950f3acd", "parents": [ "e19caae7177fcc732ae1b47135e39f577352adb2" ], "author": { "name": "Chaithrika U S", "email": "chaithrika@ti.com", "time": "Tue Dec 09 22:21:25 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Dec 09 22:21:25 2008 -0800" }, "message": "phy: Add LSI ET1011C PHY driver\n\nAdds LSI ET1011C PHY driver. \nThis driver is used by TI DM646x EVM.\n\nSigned-off-by: Chaithrika U S \u003cchaithrika@ti.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "f95be1806fde884c1655237d49a7e5f82e4a935f", "tree": "546cf0d1ea682fa6580b1cf387ed8c78fed9a5ec", "parents": [ "4621bf129856bad902d7662053b79faaeb3e66cc" ], "author": { "name": "Giuseppe Cavallaro", "email": "peppe.cavallaro@st.com", "time": "Fri Nov 28 16:42:41 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Nov 28 16:42:41 2008 -0800" }, "message": "phy: add the ST ste10Xp PHYs\n\nThis patch adds the STMicroelectronics ste10xp PHY device driver.\nIt supports both the ste100p and the ste101p devices.\n\nSuspend/resume alredy added.\n\nSigned-off-by: Giuseppe Cavallaro \u003cpeppe.cavallaro@st.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "4621bf129856bad902d7662053b79faaeb3e66cc", "tree": "1dd1d19701b9c235b131e2393b3fc5de35cfe34a", "parents": [ "0f0ca340e57bd7446855fefd07a64249acf81223" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Nov 28 16:40:26 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Nov 28 16:40:26 2008 -0800" }, "message": "phy: Add file missed in previous commit.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "0f0ca340e57bd7446855fefd07a64249acf81223", "tree": "9a3af0f86f8bcce9eb86a38bf4dd5f4a2c5da2d1", "parents": [ "914804b95caa61c633431262044034ab05c78ba4" ], "author": { "name": "Giuseppe Cavallaro", "email": "peppe.cavallaro@st.com", "time": "Fri Nov 28 16:24:56 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Nov 28 16:24:56 2008 -0800" }, "message": "phy: power management support\n\nThis patch adds the power management support into the physical\nabstraction layer.\n\nSuspend and resume functions respectively turns on/off the bit 11\ninto the PHY Basic mode control register.\nGeneric PHY device starts supporting PM.\n\nIn order to support the wake-on LAN and avoid to put in power down\nthe PHY device, the MDIO is aware of what the Ethernet device wants to do.\n\nVoluntary, no CONFIG_PM defines were added into the sources.\nAlso generic suspend/resume functions are exported to allow\nother drivers use them (such as genphy_config_aneg etc.).\n\nWithin the phy_driver_register function, we need to remove the\nmemset. It overrides the device driver owner and it is not good.\n\nSigned-off-by: Giuseppe Cavallaro \u003cpeppe.cavallaro@st.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "914804b95caa61c633431262044034ab05c78ba4", "tree": "eb2ee070d8ecf6efc2ea6cdb3bdac34fecb43ae7", "parents": [ "65a467f553067fae21b66ac0778247c930936749" ], "author": { "name": "Giuseppe Cavallaro", "email": "peppe.cavallaro@st.com", "time": "Fri Nov 28 16:14:12 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Nov 28 16:14:12 2008 -0800" }, "message": "phy: add natsemi PHY driver\n\nThis patch adds the PHY device driver for the National Semiconductor\nDP83865 Gig PHYTER.\n\nSigned-off-by: Giuseppe Cavallaro \u003cpeppe.cavallaro@st.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5b9ab2ec04ec1e1e53939768805612ac191d7ba2", "tree": "22d29905c148d2d743b3eccb585fbe60fb91e25a", "parents": [ "851fd7bd88524bb4e20f3def3127cd9167d6d0cf", "3ec192559033ed457f0d7856838654c100fc659f" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Nov 26 23:48:40 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Nov 26 23:48:40 2008 -0800" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\n\tdrivers/net/hp-plus.c\n\tdrivers/net/wireless/ath5k/base.c\n\tdrivers/net/wireless/ath9k/recv.c\n\tnet/wireless/reg.c\n" }, { "commit": "11c6dd2c723a9ff9bdd4ee11b2798a08abc94e98", "tree": "89f3cdd42cb4164edf09415880f9f53120dca397", "parents": [ "244f46ae6e9e18f6fc0be7d1f49febde4762c34b" ], "author": { "name": "Trent Piepho", "email": "tpiepho@freescale.com", "time": "Tue Nov 25 01:00:47 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Nov 25 01:00:47 2008 -0800" }, "message": "phylib: Add Vitesse VSC8221 SGMII PHY\n\nPHY is mostly compatible with the existing VSC8244 PHY. The init sequence\nis different and the interrupt mask lacks some bits present in the VSC8244.\n\nRather than making a copy of the existing VSC234x config_intr function and\nchange one constant, I modify it to select the interrupt mask based on\nwhich driver is calling it. This lets it be used by both drivers.\n\nSigned-off-by: Trent Piepho \u003ctpiepho@freescale.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "2fbb69aa576f4392c4a04e6874fa429b8bde0f68", "tree": "29f30a83dba9fd617ce24e31b1cc7e20229ba85d", "parents": [ "321d32a052d6b5f71111ebad4fbebea5577f8974" ], "author": { "name": "Matt Carlson", "email": "mcarlson@broadcom.com", "time": "Fri Nov 21 17:22:53 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Nov 21 17:22:53 2008 -0800" }, "message": "broadcom: Add 57780 support\n\nThis patch adds the 57780 PHY ID to the broadcom module.\n\nSigned-off-by: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "6436cbcd735a11fc93bf3353c68914bc545e6d1e", "tree": "94aa2423de352bdabeb0b6f35d27fc6eb8bf422d", "parents": [ "75e07fc3d87ba9b3255e1fcd735186a533ea0754" ], "author": { "name": "Giuseppe Cavallaro", "email": "peppe.cavallaro@st.com", "time": "Thu Nov 20 20:43:18 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Nov 20 20:43:18 2008 -0800" }, "message": "phy: fix phy_id detection also for broken hardware.\n\nThis patch fixes the case when the phy_ids is mostly Fs and in some case 0x0\ndue to broken hardware.\n\nSigned-off-by: Giuseppe Cavallaro \u003cpeppe.cavallaro@st.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "6ab33d51713d6d60c7677c0d020910a8cb37e513", "tree": "546c2ff099b2757e75cf34ddace874f1220f740e", "parents": [ "7be6065b39c3f1cfa796667eac1a2170465acc91", "13d428afc007fcfcd6deeb215618f54cf9c0cae6" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Nov 20 16:44:00 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Nov 20 16:44:00 2008 -0800" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\n\tdrivers/net/ixgbe/ixgbe_main.c\n\tinclude/net/mac80211.h\n\tnet/phonet/af_phonet.c\n" }, { "commit": "de339c2aa7fea18410b1abeab5674bfbd4073a63", "tree": "07b2d6c08d5fa9b3400fc00a286654dd06b5461a", "parents": [ "31c221c49f92d17632e0d662eb62a27e8b425805" ], "author": { "name": "Trent Piepho", "email": "tpiepho@freescale.com", "time": "Wed Nov 19 15:52:41 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Nov 19 15:52:41 2008 -0800" }, "message": "phylib: Fix auto-negotiation restart avoidance\n\nA previous patch, 51e2a3846eab18711f4eb59cd0a4c33054e2980a, made\ngenphy_config_aneg() not restart aneg by calling genphy_restart_aneg() if\nthe advertisement hadn\u0027t changed.\n\nBut, genphy_restart_aneg() doesn\u0027t just restart aneg, it may also *enable*\naneg or un-isolate the PHY from the MII (those functions are controlled by\nthe same register). The code to avoid calling genphy_restart_aneg() didn\u0027t\nconsider this.\n\nSo, modify genphy_config_aneg() to also check if the PHY needs to have aneg\nenabled or be un-isolated before deciding not to restart aneg.\n\nThis caused a problem with certain Davicom PHYs, as that driver isolates\nthe PHY (why?) before calling genphy_config_aneg() and expects the PHY to\nbe un-isolated by that function.\n\nSigned-off-by: Trent Piepho \u003ctpiepho@freescale.com\u003e\nReported-by: Scott Wood \u003cscottwood@freescale.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "198d6ba4d7f48c94f990f4604f0b3d73925e0ded", "tree": "56bbdf8ba2553c23c8099da9344a8f1d1aba97ab", "parents": [ "9a57f7fabd383920585ed8b74eacd117c6551f2d", "7f0f598a0069d1ab072375965a4b69137233169c" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Nov 18 23:38:23 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Nov 18 23:38:23 2008 -0800" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\n\tdrivers/isdn/i4l/isdn_net.c\n\tfs/cifs/connect.c\n" }, { "commit": "f004f3ea34209d8b836426b26ade3dc502631b18", "tree": "bf58002618bc3dd98db2416bb20cbeb016ecdd23", "parents": [ "72af187f216ed83c77ca3e6f22dfc9caf72e9347" ], "author": { "name": "Paulius Zaleckas", "email": "paulius.zaleckas@teltonika.lt", "time": "Fri Nov 14 00:24:34 2008 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Nov 16 18:59:45 2008 -0800" }, "message": "phylib: make mdio-gpio work without OF (v4)\n\nmake mdio-gpio work with non OpenFirmware gpio implementation.\n\nAditional changes to mdio-gpio:\n- use gpio_request() and gpio_free()\n- place irq[] array in struct mdio_gpio_info\n- add module description, author and license\n- add note about compiling this driver as module\n- rename mdc and mdio function (were ugly names)\n- change MII to MDIO in bus name\n- add __init __exit to module (un)loading functions\n- probe fails if no phys added to the bus\n- kzalloc bitbang with sizeof(*bitbang)\n\nChanges since v3:\n- keep bus naming \"%x\" to be compatible with existing drivers.\n\nChanges since v2:\n- more #ifdefs reduction\n- platform driver will be registered on OF platforms also\n- unified platform and OF bus_id to phy%i\n\nChanges since v1:\n- removed NO_IRQ\n- reduced #idefs\n\nLaurent, please test this driver under OF.\n\nSigned-off-by: Paulius Zaleckas \u003cpaulius.zaleckas@teltonika.lt\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "72af187f216ed83c77ca3e6f22dfc9caf72e9347", "tree": "09671545c146656ffb968d8650c5021b4fce092d", "parents": [ "6817ba2cd22cfed2e93d062dca3d7a82465d693d" ], "author": { "name": "Paulius Zaleckas", "email": "paulius.zaleckas@teltonika.lt", "time": "Fri Nov 14 00:24:28 2008 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Nov 16 18:59:24 2008 -0800" }, "message": "phylib: rename mdio-ofgpio to mdio-gpio\n\nSigned-off-by: Paulius Zaleckas \u003cpaulius.zaleckas@teltonika.lt\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "3ee82383f0098a2e13acc8cf1be8e47512f41e5a", "tree": "ed87a022c71e68543a73a3e6840a63e8cf015513", "parents": [ "773c9c1f77174429ad2feb1735a3beb33ff3b6c0" ], "author": { "name": "Giulio Benetti", "email": "giulio.benetti@micronovasrl.com", "time": "Thu Nov 13 21:53:13 2008 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Nov 16 01:49:41 2008 -0800" }, "message": "phy: fix phy address bug\n\nPHYID returns 0xffff and not 0xffffffff when not found and in some\ncase(at91sam9263) 0x0. Maybe this patch could be useful.\n\nSigned-off-by: Giulio Benetti \u003cgiulio.benetti@micronovasrl.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "605f196efbf8dcbb3581e76ddd0573899dffcf1f", "tree": "954ce1192cb7cf3820f821b880a284b83e6cba55", "parents": [ "d53b93f2603554c3420e301bd13ee2c354a15ceb" ], "author": { "name": "Ron Madrid", "email": "ron_madrid@sbcglobal.net", "time": "Thu Nov 06 09:05:26 2008 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Nov 15 14:04:27 2008 -0800" }, "message": "phy: Add support for Marvell 88E1118 PHY\n\nThis patch will add support for the Marvell 88E1118 PHY which supports gigabit ethernet among other things.\n\nSigned-off-by: Ron Madrid \u003cron_madrid@sbcglobal.net\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "3e44017b589f001941723dfdfede2ca6284dddce", "tree": "ddfe46aefebff4ce75b3b9c53fce8dfd2ada3d32", "parents": [ "3b259e365998291a02488225e32b9f2b73723b3e" ], "author": { "name": "Lennert Buytenhek", "email": "buytenh@wantstofly.org", "time": "Sun Nov 09 05:34:47 2008 +0100" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Fri Nov 14 18:19:40 2008 -0500" }, "message": "phylib: fix premature freeing of struct mii_bus\n\nCommit 46abc02175b3c246dd5141d878f565a8725060c9 (\"phylib: give mdio\nbuses a device tree presence\") added a call to device_unregister() in\na situation where the caller did not intend for the device to be\nfreed yet, but apart from just unregistering the device from the\nsystem, device_unregister() does an additional put_device() that is\nintended to free it.\n\nThe right function to use in this situation is device_del(), which\nunregisters the device from the system like device_unregister() does,\nbut without dropping the reference count an additional time.\n\nBug report from Bryan Wu \u003ccooloney@kernel.org\u003e.\n\nSigned-off-by: Lennert Buytenhek \u003cbuytenh@marvell.com\u003e\nTested-by: Bryan Wu \u003ccooloney@kernel.org\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "fb28ad35906af2f042c94e2f9c0f898ef9acfa37", "tree": "ee3d535ab38d680b424a857406789f8c28bf5266", "parents": [ "23779897546c1effb546ff89b89803d9d955d517" ], "author": { "name": "Kay Sievers", "email": "kay.sievers@vrfy.org", "time": "Mon Nov 10 13:55:14 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Nov 10 13:55:14 2008 -0800" }, "message": "net: struct device - replace bus_id with dev_name(), dev_set_name()\n\nAcked-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\nAcked-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\nSigned-off-by: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "fd9abb3d97c2ab883e4732ec1214fe64190236e7", "tree": "e5f9c0b1ab77980e22434c85cf50644e18c1e134", "parents": [ "c5916cf8dbd3ac5ec675d9347aeaa796b546b50e" ], "author": { "name": "Steve Glendinning", "email": "steve.glendinning@smsc.com", "time": "Wed Nov 05 00:35:37 2008 +0000" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Thu Nov 06 00:58:40 2008 -0500" }, "message": "SMSC LAN911x and LAN921x vendor driver\n\nAttached is a driver for SMSC\u0027s LAN911x and LAN921x families of embedded\nethernet controllers.\n\nThere is an existing smc911x driver in the tree; this is intended to\nreplace it. Dustin McIntire (the author of the smc911x driver) has\nexpressed his support for switching to this driver.\n\nThis driver contains workarounds for all known hardware issues, and has\nbeen tested on all flavours of the chip on multiple architectures.\n\nThis driver now uses phylib, so this patch also adds support for the\ndevice\u0027s internal phy\n\nSigned-off-by: Steve Glendinning \u003csteve.glendinning@smsc.com\u003e\nSigned-off-by: Bahadir Balban \u003cBahadir.Balban@arm.com\u003e\nSigned-off-by: Dustin Mcintire \u003cdustin@sensoria.com\u003e\nSigned-off-by: Bill Gatliff \u003cbgat@billgatliff.com\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "772638b6c87da7043c50914dbb033c08155508dd", "tree": "186389bdcc22be1eb0a89944d553d8c246dedf51", "parents": [ "042a75b99fbda6bf7c7bf4496e205e3e7acc953a" ], "author": { "name": "Matt Carlson", "email": "mcarlson@broadcom.com", "time": "Mon Nov 03 16:56:51 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Nov 03 16:56:51 2008 -0800" }, "message": "broadcom: Add support for BCM50610\n\nThis patch adds the BCM50610 to the list of phys supported by the\nbroadcom driver.\n\nSigned-off-by: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "042a75b99fbda6bf7c7bf4496e205e3e7acc953a", "tree": "cc30c7d2df02300f78782f86b30f64b968cdc054", "parents": [ "5e0c676c717316f315dcf76da52dc0002c43632a" ], "author": { "name": "Matt Carlson", "email": "mcarlson@broadcom.com", "time": "Mon Nov 03 16:56:29 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Nov 03 16:56:29 2008 -0800" }, "message": "broadcom: Refine expansion register access routine\n\nThis patch makes the expansion register access routines a little more\nformal. They will be used by the following bcm50610 support patch.\n\nSigned-off-by: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5e0c676c717316f315dcf76da52dc0002c43632a", "tree": "6409c482f04f35601eb10f1ca2567d868a76e1c9", "parents": [ "fcb389dfd842be54545cb436b3437f07da10115c" ], "author": { "name": "Matt Carlson", "email": "mcarlson@broadcom.com", "time": "Mon Nov 03 16:56:07 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Nov 03 16:56:07 2008 -0800" }, "message": "broadcom: Add flow control support\n\nThis patch adds flow control support to Broadcom phys.\n\nSigned-off-by: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "26853ab6f9a4c482be4b638477335704724d4854", "tree": "b535042f8739c083ad56b1bb749001c24ab1b8ce", "parents": [ "0b4a4fea253e1296222603ccc55430ed7cd9413a" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Sun Jan 27 10:29:20 2008 -0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Oct 16 09:24:52 2008 -0700" }, "message": "NET: convert the phy_device file to use bus_find_device_by_name\n\nThe driver core now has this helper function, so might as well use it\ninstead of forcing the phy code to roll their own version.\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "892871dcc39c23d3e30f8c317a5bfbab74084a40", "tree": "c34180cfc01dc25b606668ae1f425903f9018f4d", "parents": [ "a02d44a02bd2b3f3848f30e335adc3c076b3f905" ], "author": { "name": "Adrian Bunk", "email": "bunk@kernel.org", "time": "Mon Oct 13 18:48:09 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Oct 13 18:48:09 2008 -0700" }, "message": "net: export genphy_restart_aneg\n\nThis patch fixes the following build error caused by\ncommit ed94493fb38a665cebcf750dfabe8a6dd13e136f\n(mv643xx_eth: convert to phylib):\n\n\u003c-- snip --\u003e\n\n...\n Building modules, stage 2.\n MODPOST 1280 modules\nERROR: \"genphy_restart_aneg\" [drivers/net/mv643xx_eth.ko] undefined!\n...\nmake[2]: *** [__modpost] Error 1\n\n\u003c-- snip --\u003e\n\nSigned-off-by: Adrian Bunk \u003cbunk@kernel.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "78c36b15a02941403be5f1d28c06074f1e192079", "tree": "59c316e6961b644604a6eca6b467859797cfec1c", "parents": [ "b4bb4ac8cb05ab5c13dfb7b47ef243982d3ad526" ], "author": { "name": "Randy Dunlap", "email": "randy.dunlap@oracle.com", "time": "Mon Oct 13 18:46:22 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Oct 13 18:46:22 2008 -0700" }, "message": "net/phy: add missing kernel-doc\n\nFix kernel-doc warning, missing description:\n\nWarning(lin2627-g3-kdocfixes//drivers/net/phy/mdio_bus.c:63): No description found for parameter \u0027d\u0027\n\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "ec2a5652ea53c102306f08cdf516f98e32bd4b61", "tree": "eb4aaee0455d2627556a830e4b491e7bba95bb87", "parents": [ "724f88057609c00d6e973c3a7e0eb72f8eec2da9" ], "author": { "name": "Lennert Buytenhek", "email": "buytenh@marvell.com", "time": "Thu Oct 09 09:45:04 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Oct 09 09:45:04 2008 -0700" }, "message": "phylib: two dynamic mii_bus allocation fallout fixes\n\n1. arch/powerpc/platforms/pasemi/gpio_mdio.c also needs to be\n converted over to mdiobus_{alloc,free}().\n\n2. drivers/net/phy/fixed.c used to embed a struct mii_bus into its\n struct fixed_mdio_bus and then use container_of() to go from the\n former to the latter. Since mii bus structures are no longer\n embedded, we need to do something like use the mii bus private\n pointer to go from mii_bus to fixed_mdio_bus instead.\n\nSigned-off-by: Lennert Buytenhek \u003cbuytenh@marvell.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "2e888103295f47b8fcbf7e9bb8c5da97dd2ecd76", "tree": "210943ed285496352078124fd2a43443b1e5b265", "parents": [ "46abc02175b3c246dd5141d878f565a8725060c9" ], "author": { "name": "Lennert Buytenhek", "email": "buytenh@wantstofly.org", "time": "Mon Sep 29 17:12:35 2008 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Oct 08 16:38:41 2008 -0700" }, "message": "phylib: add mdiobus_{read,write}\n\nAdd mdiobus_{read,write} routines to allow direct reading/writing\nof registers on an mii bus without having to go through the PHY\nabstraction, and make phy_{read,write} use these primitives.\n\nSigned-off-by: Lennert Buytenhek \u003cbuytenh@marvell.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "46abc02175b3c246dd5141d878f565a8725060c9", "tree": "a777a25a6613b1187244c3bd5a22e451028fccbe", "parents": [ "298cf9beb9679522de995e249eccbd82f7c51999" ], "author": { "name": "Lennert Buytenhek", "email": "buytenh@marvell.com", "time": "Wed Oct 08 16:33:40 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Oct 08 16:33:40 2008 -0700" }, "message": "phylib: give mdio buses a device tree presence\n\nIntroduce the mdio_bus class, and give each \u0027struct mii_bus\u0027 its own\n\u0027struct device\u0027, so that mii_bus objects are represented in the device\ntree and can be found by querying the device tree.\n\nSigned-off-by: Lennert Buytenhek \u003cbuytenh@marvell.com\u003e\nAcked-by: Andy Fleming \u003cafleming@freescale.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "298cf9beb9679522de995e249eccbd82f7c51999", "tree": "cabbc9c696a063982aea9a24d8caa667daa33a1a", "parents": [ "18ee49ddb0d242ed1d0e273038d5e4f6de7379d3" ], "author": { "name": "Lennert Buytenhek", "email": "buytenh@marvell.com", "time": "Wed Oct 08 16:29:57 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Oct 08 16:29:57 2008 -0700" }, "message": "phylib: move to dynamic allocation of struct mii_bus\n\nThis patch introduces mdiobus_alloc() and mdiobus_free(), and\nmakes all mdio bus drivers use these functions to allocate their\nstruct mii_bus\u0027es dynamically.\n\nSigned-off-by: Lennert Buytenhek \u003cbuytenh@marvell.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\nAcked-by: Andy Fleming \u003cafleming@freescale.com\u003e\n" }, { "commit": "18ee49ddb0d242ed1d0e273038d5e4f6de7379d3", "tree": "8d935cda154204171628cee535f83a992aa66ef9", "parents": [ "236bb5e649c2a7e8398b87df5e643368408afb4a" ], "author": { "name": "Lennert Buytenhek", "email": "buytenh@wantstofly.org", "time": "Wed Oct 01 15:41:33 2008 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Oct 08 16:27:49 2008 -0700" }, "message": "phylib: rename mii_bus::dev to mii_bus::parent\n\nIn preparation of giving mii_bus objects a device tree presence of\ntheir own, rename struct mii_bus\u0027s -\u003edev argument to -\u003eparent, since\nhaving a \u0027struct device *dev\u0027 that points to our parent device\nconflicts with introducing a \u0027struct device dev\u0027 representing our own\ndevice.\n\nSigned-off-by: Lennert Buytenhek \u003cbuytenh@marvell.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\nAcked-by: Andy Fleming \u003cafleming@freescale.com\u003e\n" }, { "commit": "0acb28396728f42b6b1553c85d27c37513796043", "tree": "2b56f5734d139c748c030e90ccf047a3b261fb1e", "parents": [ "51e2a3846eab18711f4eb59cd0a4c33054e2980a" ], "author": { "name": "Trent Piepho", "email": "tpiepho@freescale.com", "time": "Wed Oct 08 15:46:57 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Oct 08 15:46:57 2008 -0700" }, "message": "phylib: Wake PHY state machine on interrupt\n\nThis way the phy layer will respond to a change in phy state immediately,\ninstead of up to one second later when the state machine timer runs.\n\nSigned-off-by: Trent Piepho \u003ctpiepho@freescale.com\u003e\nAcked-by: Andy Fleming \u003cafleming@freescale.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "51e2a3846eab18711f4eb59cd0a4c33054e2980a", "tree": "a9abbddd407ce2205218148ebdcf8f54709f6a1c", "parents": [ "7bf6bf4803df1adc927f585168d2135fb019c698" ], "author": { "name": "Trent Piepho", "email": "tpiepho@freescale.com", "time": "Wed Sep 24 10:55:46 2008 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Oct 08 15:43:54 2008 -0700" }, "message": "PHY: Avoid unnecessary aneg restarts\n\nThe PHY\u0027s aneg is configured and restarted whenever the link is brought up,\ne.g. when DHCP is started after the kernel has booted. This can take the\nlink down for several seconds while auto-negotiation is redone.\n\nIf the advertised features haven\u0027t changed, then it shouldn\u0027t be necessary\nto bring down the link and start auto-negotiation over again.\n\ngenphy_config_advert() is enhanced to return 0 when the advertised features\nhaven\u0027t been changed and \u003e0 when they have been.\n\ngenphy_config_aneg() then uses this information to not call\ngenphy_restart_aneg() if there has been no change.\n\nSigned-off-by: Trent Piepho \u003ctpiepho@freescale.com\u003e\nAcked-by: Andy Fleming \u003cafleming@freescale.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c6d6a511d768cf7627ab54fc18f40edf85097362", "tree": "73b390800c656c2304c911ce8c5b45330053706a", "parents": [ "4dd565134ece7e5d528d4c5288879310c54419e9" ], "author": { "name": "Lennert Buytenhek", "email": "buytenh@wantstofly.org", "time": "Thu Sep 18 03:06:52 2008 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Oct 08 15:24:56 2008 -0700" }, "message": "phylib: phy_mii_ioctl() fixes\n\nMake the SIOCGMIIPHY case fall through properly (it is supposed\nto not only return the ID of the default PHY but also to read from\nthat PHY), and make phy_mii_ioctl() return the same error code as\ngeneric_mii_ioctl() in case of an unsupported operation.\n\nSigned-off-by: Lennert Buytenhek \u003cbuytenh@marvell.com\u003e\nAcked-by: Andy Fleming \u003cafleming@freescale.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "4fd5f812c23c7deee6425f4a318e85c317cd1d6c", "tree": "c554d67d67921e66516d978afc58878286b02966", "parents": [ "4ff3495a51c7226376d8013c5742d1d5e54876a7" ], "author": { "name": "Lennert Buytenhek", "email": "buytenh@wantstofly.org", "time": "Tue Aug 26 13:08:46 2008 +0200" }, "committer": { "name": "Lennert Buytenhek", "email": "buytenh@marvell.com", "time": "Fri Sep 19 05:13:54 2008 +0200" }, "message": "phylib: allow incremental scanning of an mii bus\n\nThis patch splits the bus scanning code in mdiobus_register() off\ninto a separate function, and makes this function available for\ncalling from external code. This allows incrementally scanning an\nmii bus, e.g. as information about which addresses are \u0027safe\u0027 to\nscan becomes available.\n\nSigned-off-by: Lennert Buytenhek \u003cbuytenh@marvell.com\u003e\nAcked-by: Andy Fleming \u003cafleming@freescale.com\u003e\n" }, { "commit": "7239016d52c6d568d069f083bdcd17f35ab79fd8", "tree": "cc851aa1bb0a1838e345fe2ad64ae0b1d5554dc6", "parents": [ "9cf8fa4334e60f27b4a392f432c292f3af268215" ], "author": { "name": "Wang Jian", "email": "lark@linux.net.cn", "time": "Wed Jul 16 21:46:20 2008 +0800" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Tue Jul 22 17:59:12 2008 -0400" }, "message": "net/phy: Fix 88e1111 copper/fiber selection in RGMII mode\n\nMII_M1111_HWCFG_FIBER_COPPER_RES is a bit of MII_M1111_PHY_EXT_SR, not\nMII_M1111_PHY_EXT_CR.\n\nSigned-off-by: Wang Jian \u003clark@linux.net.cn\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "9cf8fa4334e60f27b4a392f432c292f3af268215", "tree": "ef84f4c0ca3559518b085639340b8b392e6ffef2", "parents": [ "c0e5a8c21bb9bb222917c36eba503ae88af52c34" ], "author": { "name": "Wang Jian", "email": "lark@linux.net.cn", "time": "Wed Jul 16 21:46:17 2008 +0800" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Tue Jul 22 17:58:10 2008 -0400" }, "message": "net/phy: Fix copper/fiber auto-selection for 88e1111\n\nThe 27.15 bit (MII_M1111_HWCFG_FIBER_COPPER_AUTO) is disable bit. When\nset to 1, copper/fiber auto selection is disabled. The current code\nto enable but actually disable auto selection.\n\nSigned-off-by: Wang Jian \u003clark@linux.net.cn\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "e9911c2c8f87cfda47109c42e399fa487117095c", "tree": "7cc27db92d84a2a4fcab0c07bcc95372917f10ff", "parents": [ "9439f749441f3a7c2c8ef9e32b698cfe9ed60f48" ], "author": { "name": "Takashi Iwai", "email": "tiwai@suse.de", "time": "Mon Jul 07 16:51:45 2008 +0200" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Fri Jul 11 01:20:34 2008 -0400" }, "message": "Fix missing exports for net/phy/mdio-bitbang.c\n\n{alloc,free}_mdio_bitbang() are not exported while they are used in\nmdio-ofgpio driver.\n\nSigned-off-by: Takashi Iwai \u003ctiwai@suse.de\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "a5edeccb1a8432ae5d9fb9bccea5a4b64c565017", "tree": "d55dfa3802a65d3a3372f3487fb42b8495f96f2c", "parents": [ "62c78329581e76347e1078b8ea996b603be3efec" ], "author": { "name": "Laurent Pinchart", "email": "laurentp@cse-semaphore.com", "time": "Mon May 26 11:53:21 2008 +0200" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Fri May 30 22:18:25 2008 -0400" }, "message": "net: OpenFirmware GPIO based MDIO bitbang driver\n\nThis patch adds an MDIO bitbang driver that uses the GPIO library and its\nOF bindings to access the bus I/Os.\n\nSigned-off-by: Laurent Pinchart \u003claurentp@cse-semaphore.com\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "a5b17df04c4ad8f25fc598fce37fccb4b387c94c", "tree": "2d0084f6db86362eb067b617ff8470f255ba37e7", "parents": [ "b79eeeb9e48457579cb742cd02e162fcd673c4a3", "c03571a3e22b821e5be7bda7b166c4554770f489" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu May 29 03:31:03 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu May 29 03:31:03 2008 -0700" }, "message": "Merge branch \u0027upstream-next-davem\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6\n" }, { "commit": "a01b3d766c0ad3e63978b0f6faf4004688f13522", "tree": "d4fe4b54c88c8faa3496fed41017e67b25da9d88", "parents": [ "fa701bd24d6e64a2283d6fa386554775fd4336e7" ], "author": { "name": "Paul Gortmaker", "email": "paul.gortmaker@windriver.com", "time": "Thu May 22 12:43:50 2008 -0400" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Thu May 22 14:01:01 2008 -0400" }, "message": "phylib: do EXPORT_SYMBOL on get_phy_id\n\nCommit cac1f3c8 factored out the code for get_phy_id so that it\ncould be reused in multiple places. Turns out that some of the\nusers can be modular, so we need to export this symbol as well.\n\nSigned-off-by: Paul Gortmaker \u003cpaul.gortmaker@windriver.com\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "1b0771ab3ea102ce77e9ca83abc500e542402e54", "tree": "5bd0d3de2e10cb82410ae5c53af56fe11a15b49d", "parents": [ "cd9af3dac6d1ad001b2d5d912dbd49e184d23b9d" ], "author": { "name": "Maciej W. Rozycki", "email": "macro@linux-mips.org", "time": "Sat May 17 06:46:19 2008 +0100" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Thu May 22 06:34:32 2008 -0400" }, "message": "PHYLIB: Kconfig: Complete the list of Broadcom PHYs supported\n\n Add Broadcom PHYs supported missing from the description.\n\nSigned-off-by: Maciej W. Rozycki \u003cmacro@linux-mips.org\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "cd9af3dac6d1ad001b2d5d912dbd49e184d23b9d", "tree": "4f74915eefb47693c8ec3db1c1e1deb5afe5de63", "parents": [ "3915c1e8634a321d9680e5cd80a53053b642dc0c" ], "author": { "name": "Nate Case", "email": "ncase@xes-inc.com", "time": "Sat May 17 06:40:39 2008 +0100" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Thu May 22 06:34:31 2008 -0400" }, "message": "PHYLIB: Add 1000Base-X support for Broadcom bcm5482\n\nConfigure the BCM5482S secondary SerDes for 1000Base-X mode when the\nappropriate dev_flags are passed in to phy_connect(). This is\nneeded when the PHY is used for fiber and backplane connections.\n\nSigned-off-by: Nate Case \u003cncase@xes-inc.com\u003e\nSigned-off-by: Maciej W. Rozycki \u003cmacro@linux-mips.org\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "940608be2e6117c17c19b203f7393ced4d02590a", "tree": "3de6903fd7b417d4fa4ead66431654d3b0d5307c", "parents": [ "5a0a92e67b5009a71e011658da04fb92dad8961f" ], "author": { "name": "Maciej W. Rozycki", "email": "macro@linux-mips.org", "time": "Sat May 17 07:07:36 2008 +0100" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Thu May 22 06:19:22 2008 -0400" }, "message": "PHYLIB: Kconfig: Fix the dependency on S390\n\n PHYLIB was first marked as BROKEN on S390, then the enclosing menu marked\nas non-S390, then the two dependencies merged with the conversion to\nmenuconfig. Reduce to non-S390.\n\nSigned-off-by: Maciej W. Rozycki \u003cmacro@linux-mips.org\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "9b9a8bfc8dfbe09dc57f274e32e8b06151abbad7", "tree": "e866ac5c30d2156c1c7a0c42d1a46886b3a6db05", "parents": [ "f162b9d58273a9a5747211133c8ccb2de5cf5ff2" ], "author": { "name": "Andy Fleming", "email": "afleming@freescale.com", "time": "Fri May 02 13:00:51 2008 -0500" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Tue May 06 12:01:41 2008 -0400" }, "message": "phylib: Fix some sparse warnings\n\nDeclared some things static, declared some things in the header.\n\nSigned-off-by: Andy Fleming \u003cafleming@freescale.com\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "4d9b1a022a33c57ca8f31a1364cef682c8c817d6", "tree": "9275fe79066ce892128de2ee8a409d01a5002ea0", "parents": [ "48c41b9941233a85ccdb88c579bd4e9b0ee609cf" ], "author": { "name": "Steve Glendinning", "email": "steve.glendinning@smsc.com", "time": "Mon Apr 28 18:37:29 2008 +0100" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Tue Apr 29 01:55:59 2008 -0400" }, "message": "Add support for SMSC LAN8187 and LAN8700 PHYs\n\nAdd support for two additional SMSC PHY models with identical interrupt\nsource and mask registers to the LAN83C185\n\nSigned-off-by: Steve Glendinning \u003csteve.glendinning@smsc.com\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "48c41b9941233a85ccdb88c579bd4e9b0ee609cf", "tree": "5ac07c2617bcca147ba9a725032eab31e8949eb5", "parents": [ "5d12b132bc0bfb10d3f8d81f92606719b5032dcb" ], "author": { "name": "Steve Glendinning", "email": "steve.glendinning@smsc.com", "time": "Mon Apr 28 18:36:46 2008 +0100" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Tue Apr 29 01:55:57 2008 -0400" }, "message": "Rename SMSC phy functions to be more generic\n\nSeveral models of SMSC PHY have the same interrupt status and mask\nregisters as the LAN83C185, so these functions can service multiple\ndifferent PHY drivers.\n\nSigned-off-by: Steve Glendinning \u003csteve.glendinning@smsc.com\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "5d12b132bc0bfb10d3f8d81f92606719b5032dcb", "tree": "dc40df0096ae5ae3da8c8bc9d9feb2287cfb36b8", "parents": [ "23d9b3871fa03af32d06f4946f8d56b1af55997b" ], "author": { "name": "Randy Dunlap", "email": "randy.dunlap@oracle.com", "time": "Mon Apr 28 10:58:22 2008 -0700" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Tue Apr 29 01:55:55 2008 -0400" }, "message": "drivers/net/phy: fix kernel-doc notation\n\nFix kernel-doc warning:\nWarning(linux-2.6.25-git11//drivers/net/phy/phy_device.c:275): No\ndescription found for parameter \u0027bus_id\u0027\n\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "f62220d3a9ccb879c3f90f845ae57b724b7bbb62", "tree": "72697d5d0b7bfdebaf0fd74bea07212c9820a6df", "parents": [ "8ec7226a93dcd4a314e2387d1033aef01145061b" ], "author": { "name": "Andy Fleming", "email": "afleming@freescale.com", "time": "Fri Apr 18 17:29:54 2008 -0500" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Fri Apr 25 02:08:52 2008 -0400" }, "message": "phylib: Add support for board-level PHY fixups\n\nSometimes the specific interaction between the platform and the PHY\nrequires special handling. For instance, to change where the PHY\u0027s\nclock input is, or to add a delay to account for latency issues in the\ndata path. We add a mechanism for registering a callback with the PHY\nLib to be called on matching PHYs when they are brought up, or reset.\n\nSigned-off-by: Andy Fleming \u003cafleming@freescale.com\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "cac1f3c8a80f3fc0b4489d1d3ba29214677ffab2", "tree": "a4bd716695f61d11f588f5145c879cefa42d6900", "parents": [ "b1394f961a90a7195ea177ee56d54fe5c37181ca" ], "author": { "name": "Paul Gortmaker", "email": "paul.gortmaker@windriver.com", "time": "Tue Apr 15 12:49:21 2008 -0400" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Thu Apr 17 15:31:33 2008 -0400" }, "message": "phylib: factor out get_phy_id from within get_phy_device\n\nWe were already doing what amounts to a get_phy_id from within\nget_phy_device, and rather than duplicate this for the TBIPA\nprobing, we might as well just factor it out and make it available\ninstead.\n\nSigned-off-by: Paul Gortmaker \u003cpaul.gortmaker@windriver.com\u003e\nAcked-by: Andy Fleming \u003cafleming@freescale.com\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "b1394f961a90a7195ea177ee56d54fe5c37181ca", "tree": "ca6b100d904a656eb599eb9d9b2f493a82be935e", "parents": [ "d96a51f6b8040ef2b25b88032f23ffdb1ddba681" ], "author": { "name": "Paul Gortmaker", "email": "paul.gortmaker@windriver.com", "time": "Mon Apr 14 23:35:41 2008 -0400" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Thu Apr 17 15:31:32 2008 -0400" }, "message": "PHY: add BCM5464 support to broadcom PHY driver\n\nThe BCM5464 can be used with the current broadcom PHY driver\nby just adding the appropriate chip ID and using the existing\nsupport within.\n\nSigned-off-by: Paul Gortmaker \u003cpaul.gortmaker@windriver.com\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "9d9326d3bc0ea9a8bbe40bf3e5e66c7b9858caa0", "tree": "51b2ee6bfa87bbd6faac0bc00a787354e1fb72a0", "parents": [ "d080cd6301e107e79c6a0fc654319f8979f70549" ], "author": { "name": "Andy Fleming", "email": "afleming@freescale.com", "time": "Wed Apr 09 19:38:13 2008 -0500" }, "committer": { "name": "Jeff Garzik", "email": "jgarzik@redhat.com", "time": "Wed Apr 16 20:09:35 2008 -0400" }, "message": "phy: Change mii_bus id field to a string\n\nHaving the id field be an int was making more complex bus topologies\nexcessively difficult. For now, just convert it to a string, and\nchange all instances of \"bus-\u003eid \u003d val\" to\nsnprintf(id, MII_BUS_ID_LEN, \"%x\", val).\n\nSigned-off-by: Andy Fleming \u003cafleming@freescale.com\u003e\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "df39e8ba56a788733d369068c7319e04b1da3cd5", "tree": "1e9be853bdb455e341cdbf957656f342cfa2eb9e", "parents": [ "f5572855ec492334d8c3ec0e0e86c31865d5cf07", "159d83363b629c91d020734207c1bc788b96af5a" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 14 02:30:23 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 14 02:30:23 2008 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\n\tdrivers/net/ehea/ehea_main.c\n\tdrivers/net/wireless/iwlwifi/Kconfig\n\tdrivers/net/wireless/rt2x00/rt61pci.c\n\tnet/ipv4/inet_timewait_sock.c\n\tnet/ipv6/raw.c\n\tnet/mac80211/ieee80211_sta.c\n" }, { "commit": "5da4e37e59663bd1e9eae1d717e2ceb178a485b8", "tree": "30ee6ad85d368c4c6dbdec209583faf152f4bf0f", "parents": [ "b2a5c19ca0315723cecb9489ff8b67c4f17367b4" ], "author": { "name": "Harvey Harrison", "email": "harvey.harrison@gmail.com", "time": "Wed Apr 02 17:33:35 2008 -0700" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Apr 04 17:26:15 2008 -0400" }, "message": "net: marvell.c fix sparse shadowed variable warning\n\nThe other if blocks don\u0027t redeclare temp, remove the redeclaration in\nthe final if() block.\n\ndrivers/net/phy/marvell.c:214:7: warning: symbol \u0027temp\u0027 shadows an earlier one\ndrivers/net/phy/marvell.c:160:6: originally declared here\n\nSigned-off-by: Harvey Harrison \u003charvey.harrison@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "8e8e43843ba3ced0c657cbc0fdb10644ec60f772", "tree": "e64954326ced9c365c52c256f01b5f9fb1bcae66", "parents": [ "ed85f2c3b2b72bd20f617ac749f5c22be8d0f66e", "50fd4407b8bfbde7c1a0bfe4f24de7df37164342" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Mar 27 18:48:56 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Mar 27 18:48:56 2008 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\n\tdrivers/net/usb/rndis_host.c\n\tdrivers/net/wireless/b43/dma.c\n\tnet/ipv6/ndisc.c\n" }, { "commit": "57bb7e222804c68066e3e995dffbedda5b1ec1ea", "tree": "a0f5eadbb8f62bd0af7a11576f250611c8118c7c", "parents": [ "b39b5a2bc339d8ea04fde2e343bcb4c8f38df692" ], "author": { "name": "Anton Vorontsov", "email": "avorontsov@ru.mvista.com", "time": "Tue Mar 04 19:41:32 2008 +0300" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Wed Mar 26 00:19:56 2008 -0400" }, "message": "phy/broadcom: add support for BCM5481 PHY\n\nThis patch adds support for BCM5481 PHY. Unfortunately it\u0027s hard to\nget specifications for this PHY, so its special register 0x18 isn\u0027t\nannotated properly (but we know it\u0027s used to set up the delays).\n\nI\u0027ve kept the magic numbers, so we\u0027ll not forget to fix it at the\nfirst opportunity, and will name that register and its bits correctly.\n\np.s. also fixed the line with broken indention, introduced by\ncommit 03157ac31eb4a8883382a212b161d2e6c5059fbf\n PHYLIB: Add BCM5482 PHY support\n\nSigned-off-by: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "f0c88f9c45f39acd017328515890481adcb32607", "tree": "e9826b89e24b56bf49d309a49e2fc8ac33891687", "parents": [ "f6f4bfa3561a2d8e949cab0d28e0db6d2b13641d" ], "author": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Tue Mar 25 23:53:24 2008 -0400" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Tue Mar 25 23:53:24 2008 -0400" }, "message": "netxen, phy/marvell, skge: minor checkpatch fixes\n\nSigned-off-by: Jeff Garzik \u003cjgarzik@redhat.com\u003e\n" }, { "commit": "be937f1f89cacd833bd242c35af911b971225cf0", "tree": "676aa3730c39993d4a2a4e1d1b939a9ee776bfbc", "parents": [ "d1847a722e79bbfc557755d78f44d3e2c8ae5ea9" ], "author": { "name": "Alexandr Smirnov", "email": "asmirnov@ru.mvista.com", "time": "Wed Mar 19 00:37:24 2008 +0300" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Tue Mar 25 23:16:52 2008 -0400" }, "message": "Marvell PHY m88e1111 driver fix\n\nMarvell PHY m88e1111 (not sure about other models, but think they too)\nworks in two modes: fiber and copper. In Marvell PHY driver (that we\nhave in current community kernels) code supported only copper mode,\nand this is not configurable, bits for copper mode are simply written\nin registers during PHY initialization.\n\nThis patch adds support for both modes.\n\nSigned-off-by: Alexandr Smirnov \u003casmirnov@ru.mvista.com\u003e\nAcked-by: Andy Fleming \u003cafleming@freescale.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "f9e7d100ddea5cdcea7a02230566f36b0a648c2e", "tree": "0aa3ba9d579558e8b1a4731bac7a45a8388da6e0", "parents": [ "f37c768c39e3aeb8a508e1a45e461a506771445e" ], "author": { "name": "Adrian Bunk", "email": "adrian.bunk@movial.fi", "time": "Wed Feb 27 17:07:54 2008 +0200" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Wed Mar 05 06:34:34 2008 -0500" }, "message": "FIXED_PHY must depend on PHYLIB\u003dy\n\nThis patch fixes the following build error introduced by commit\na79d8e93d300adb84cccc38ac396cfb118c238ad and reported by Olaf Hering:\n\n\u003c-- snip --\u003e\n\n...\n LD .tmp_vmlinux1\narch/powerpc/sysdev/built-in.o: In function `of_add_fixed_phys\u0027:\nfsl_soc.c:(.init.text+0xd34): undefined reference to `fixed_phy_add\u0027\nmake: *** [.tmp_vmlinux1] Error 1\n\n\u003c-- snip --\u003e\n\nSigned-off-by: Adrian Bunk \u003cadrian.bunk@movial.fi\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "8b7c1664405a1262bb78e80011ec10aa6b79df81", "tree": "22512e85617dea4f2ea65e76938b1be6ea5bc4f7", "parents": [ "dea75bdfa57f75a7a7ec2961ec28db506c18e5db" ], "author": { "name": "frederic Rodo", "email": "f.rodo@til-technologies.fr", "time": "Wed Feb 27 12:58:37 2008 +0100" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Wed Mar 05 06:26:56 2008 -0500" }, "message": "dm9161: add configuration for MII/RMII\n\nSigned-off-by: Frederic Rodo \u003cf.rodo@til-technologies.fr\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "d1e7fe4d92742dd1aa28ca11512628adc79a904b", "tree": "6e91ec8f67314651601ec968b35c1d9be110b39e", "parents": [ "68707acb5b5d4e2b7583cbff0883516afed54d4f" ], "author": { "name": "Adrian Bunk", "email": "bunk@kernel.org", "time": "Wed Feb 20 02:13:53 2008 +0200" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Feb 23 23:57:50 2008 -0500" }, "message": "net/phy/mdio_bus.c: fix a check-after-use\n\nThis patch fixes a check-after-use spotted by the Coverity checker.\n\nSigned-off-by: Adrian Bunk \u003cbunk@kernel.org\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "651be3a2ba95bc30fcb737985741736e63231cdf", "tree": "a2804052769372d456384660a94dfcbb5418cf32", "parents": [ "d785ad74641c59074786084b24a9283d7a7727b0" ], "author": { "name": "Adrian Bunk", "email": "bunk@kernel.org", "time": "Sat Feb 02 23:15:02 2008 +0200" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Mon Feb 11 11:15:36 2008 -0500" }, "message": "net/phy/fixed.c: fix a use-after-free\n\nThis patch fixes a use-after-free introduced by\ncommit a79d8e93d300adb84cccc38ac396cfb118c238ad and spotted by the\nCoverity checker.\n\nSigned-off-by: Adrian Bunk \u003cbunk@kernel.org\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "097c2aa89f22f55db19fd0f72aede460bcb61f29", "tree": "a2746aacc233c2cd79f111cecf11f4c8a5a5ae16", "parents": [ "6344f0521aac9f93c312826216762f2185268390" ], "author": { "name": "Johnson Leung", "email": "r58129@freescale.com", "time": "Sun Feb 03 03:50:54 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Feb 03 04:28:42 2008 -0800" }, "message": "phylib: Add Realtek 821x eth PHY support\n\nthis PHY present on the MPC8315E and MPC837xE RDB boards.\n\nSigned-off-by: Johnson Leung \u003cr58129@freescale.com\u003e\nSigned-off-by: Kevin Lam \u003cr43770@freescale.com\u003e\nSigned-off-by: Joe D\u0027Abbraccio \u003cljd015@freescale.com\u003e\nSigned-off-by: Kim Phillips \u003ckim.phillips@freescale.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "35b5f6b1a82b5c586e0b24c711dc6ba944e88ef1", "tree": "cf08793802ce8f91f13e262c3b6cdcf0a01d95e9", "parents": [ "2b91213064bd882c3adf35f028c6d12fab3269ec" ], "author": { "name": "Nate Case", "email": "ncase@xes-inc.com", "time": "Tue Jan 29 10:05:09 2008 -0600" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Feb 03 04:28:41 2008 -0800" }, "message": "PHYLIB: Locking fixes for PHY I/O potentially sleeping\n\nPHY read/write functions can potentially sleep (e.g., a PHY accessed\nvia I2C). The following changes were made to account for this:\n\n * Change spin locks to mutex locks\n * Add a BUG_ON() to phy_read() phy_write() to warn against\n calling them from an interrupt context.\n * Use work queue for PHY state machine handling since\n it can potentially sleep\n * Change phydev lock from spinlock to mutex\n\nSigned-off-by: Nate Case \u003cncase@xes-inc.com\u003e\nAcked-by: Andy Fleming \u003cafleming@freescale.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "03157ac31eb4a8883382a212b161d2e6c5059fbf", "tree": "6d720fe0bf5bd462603fcf70e1c3a4bdf6ac2ba8", "parents": [ "efb90e43ffee4045efe76de90773c4a5963515a3" ], "author": { "name": "Nate Case", "email": "ncase@xes-inc.com", "time": "Tue Jan 29 10:19:00 2008 -0600" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Feb 03 04:26:28 2008 -0800" }, "message": "PHYLIB: Add BCM5482 PHY support\n\nThis Broadcom PHY is similar to other bcm54xx devices.\n\nSigned-off-by: Nate Case \u003cncase@xes-inc.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "a79d8e93d300adb84cccc38ac396cfb118c238ad", "tree": "d3c6e163a697029b0c7a14c745318f4f58a69445", "parents": [ "9b6d19dd1d87fcca43ebadfad2f50cee07fbef5e" ], "author": { "name": "Vitaly Bordug", "email": "vitb@kernel.crashing.org", "time": "Fri Dec 07 01:51:22 2007 +0300" }, "committer": { "name": "Kumar Gala", "email": "galak@kernel.crashing.org", "time": "Wed Jan 23 19:33:58 2008 -0600" }, "message": "phy/fixed.c: rework to not duplicate PHY layer functionality\n\nWith that patch fixed.c now fully emulates MDIO bus, thus no need\nto duplicate PHY layer functionality. That, in turn, drastically\nsimplifies the code, and drops down line count.\n\nAs an additional bonus, now there is no need to register MDIO bus\nfor each PHY, all emulated PHYs placed on the platform fixed MDIO bus.\nThere is also no more need to pre-allocate PHYs via .config option,\nthis is all now handled dynamically.\n\nSigned-off-by: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nSigned-off-by: Vitaly Bordug \u003cvitb@kernel.crashing.org\u003e\nAcked-by: Jeff Garzik \u003cjeff@garzik.org\u003e\nSigned-off-by: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\n" }, { "commit": "6f4a7f4183bdbd02741dcd8edbd10b8628acc5d5", "tree": "b160036cc645c4658c577a12b99902028a3885df", "parents": [ "f9663aea2a938f9dc60dbfef34b9e7847a69c947" ], "author": { "name": "Anton Vorontsov", "email": "avorontsov@ru.mvista.com", "time": "Tue Dec 04 16:17:33 2007 +0300" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Tue Dec 04 15:06:33 2007 -0500" }, "message": "PHY: Add the phy_device_release device method.\n\nLately I\u0027ve got this nice badness on mdio bus removal:\n\nDevice \u0027e0103120:06\u0027 does not have a release() function, it is broken and must be fixed.\n------------[ cut here ]------------\nBadness at drivers/base/core.c:107\nNIP: c015c1a8 LR: c015c1a8 CTR: c0157488\nREGS: c34bdcf0 TRAP: 0700 Not tainted (2.6.23-rc5-g9ebadfbb-dirty)\nMSR: 00029032 \u003cEE,ME,IR,DR\u003e CR: 24088422 XER: 00000000\n...\n[c34bdda0] [c015c1a8] device_release+0x78/0x80 (unreliable)\n[c34bddb0] [c01354cc] kobject_cleanup+0x80/0xbc\n[c34bddd0] [c01365f0] kref_put+0x54/0x6c\n[c34bdde0] [c013543c] kobject_put+0x24/0x34\n[c34bddf0] [c015c384] put_device+0x1c/0x2c\n[c34bde00] [c0180e84] mdiobus_unregister+0x2c/0x58\n...\n\nThough actually there is nothing broken, it just device\nsubsystem core expects another \"pattern\" of resource managment.\n\nThis patch implement phy device\u0027s release function, thus\nwe\u0027re getting rid of this badness.\n\nAlso small hidden bug fixed, hope none other introduced. ;-)\n\nSigned-off-by: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nAcked-by: Andy Fleming \u003cafleming@freescale.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "dda93b486a25009456fca6b9c925ab4d7c6b6d6a", "tree": "afadac90b06ac707096127eb07a7c74a82ddfb92", "parents": [ "3d26e69533e4df45d03c0b9fa0b3f7e84980b873" ], "author": { "name": "David Woodhouse", "email": "dwmw2@infradead.org", "time": "Wed Nov 28 19:56:34 2007 +0000" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Dec 01 16:35:51 2007 -0500" }, "message": "Stop phy code from returning success to unknown ioctls.\n\nThis kind of sucks, and prevents the Fedora installer from using the\ndevice for network installs...\n\n[root@efika phy]# iwconfig eth0\nWarning: Driver for device eth0 has been compiled with an ancient version\nof Wireless Extension, while this program support version 11 and later.\nSome things may be broken...\n\neth0 ESSID:off/any Nickname:\"\"\n NWID:0 Channel:0 Access Point: 00:00:BF:81:14:E0\n Bit Rate:-1.08206e+06 kb/s Sensitivity\u003d0/0\n RTS thr:off Fragment thr:off\n Encryption key:\u003ctoo big\u003e\n Power Management:off\n\nSigned-off-by: David Woodhouse \u003cdwmw2@infradead.org\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "9daf5a7695f70b60c498aac079f908c81ffe4d15", "tree": "d3bfc6a105ad7c077656b4947f38b6b36f228967", "parents": [ "7d400a4c589749bf5b5e544aee07b3c489b54d02" ], "author": { "name": "Kim Phillips", "email": "kim.phillips@freescale.com", "time": "Mon Nov 26 16:17:52 2007 -0600" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Dec 01 16:32:30 2007 -0500" }, "message": "phylib: marvell: add support for TX-only and RX-only Internal Delay\n\nPreviously, Internal Delay specification implied the delay be\napplied to both TX and RX. This patch allows for separate TX/RX-only\ninternal delay specification.\n\nSigned-off-by: Kim Phillips \u003ckim.phillips@freescale.com\u003e\nTested-by: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nAcked-by: Li Yang \u003cleoli@freescale.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "f2511f13daaf00fdd206bee7b108f75923a613c6", "tree": "c194edbe6e1ae657ed18afc103e76849cdb5a40f", "parents": [ "ac8c635abb7bce730a315be0525bea0c29e742d0" ], "author": { "name": "Olof Johansson", "email": "olof@lixom.net", "time": "Sun Nov 04 16:09:23 2007 -0600" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Mon Nov 05 17:58:36 2007 -0500" }, "message": "phylib: Silence driver registration\n\nIt gets quite verbose to see every single PHY driver being registered\nby default.\n\nSigned-off-by: Olof Johansson \u003colof@lixom.net\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "ac8c635abb7bce730a315be0525bea0c29e742d0", "tree": "26ebeecb155fffc7b01316d25c27737a4059d6b3", "parents": [ "d2ea732e9ecb68841206f2761ae91360da87cfac" ], "author": { "name": "Olof Johansson", "email": "olof@lixom.net", "time": "Sun Nov 04 16:08:51 2007 -0600" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Mon Nov 05 17:58:36 2007 -0500" }, "message": "phylib: Add ID for Marvell 88E1240\n\nAdd PHY IDs for Marvell 88E1240. It seems to have close enough programming\nmodels to 1111/1112 for basic support at least.\n\nAlso clean up whitespace in the ID list a bit.\n\nSigned-off-by: Olof Johansson \u003colof@lixom.net\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "5a46236d20faf1ec3712afb28203f7a1adb5d39d", "tree": "1ce4f205245ad81977ef78883a175e4d7c792a69", "parents": [ "418d6f871b7bab19e9f12a6c0e4713a15d6bae10" ], "author": { "name": "Randy Dunlap", "email": "randy.dunlap@oracle.com", "time": "Thu Oct 18 12:20:21 2007 -0700" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 19 23:00:01 2007 -0400" }, "message": "phy/bitbang: missing MODULE_LICENSE\n\nMissing MODULE_LICENSE(), loading this module taints the kernel.\n\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "e2ec4581adf7e288c193e981c39ca01cdb20a272", "tree": "354c0afb64104457d2690e656f2d7ae883ff5722", "parents": [ "976de6a8c304dcc43e38efcb8a0bace7866b6242" ], "author": { "name": "Scott Wood", "email": "scottwood@freescale.com", "time": "Mon Oct 01 14:20:56 2007 -0500" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:54:03 2007 -0700" }, "message": "Generic bitbanged MDIO library\n\nPreviously, bitbanged MDIO was only supported in individual\nhardware-specific drivers. This code factors out the higher level\nprotocol implementation, reducing the hardware-specific portion to\nfunctions setting direction, data, and clock.\n\nSigned-off-by: Scott Wood \u003cscottwood@freescale.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "6daf65310374d24d888201b7a6eba90b44008b7b", "tree": "787e4f56bea7096d198928e0af1cd091d5e5be31", "parents": [ "0ac49527318bc388a881152d60f49d7951606024" ], "author": { "name": "Maciej W. Rozycki", "email": "macro@linux-mips.org", "time": "Fri Sep 28 22:42:15 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:53:55 2007 -0700" }, "message": "PHYLIB: fix an interrupt loop potential when halting\n\nEnsure the PHY_HALTED state is not entered with the IRQ asserted as it\ncould lead to an interrupt loop.\n\nThere is a small window in phy_stop(), where the state of the PHY machine\nindicates it has been halted, but its interrupt output might still be\nunmasked. If an interrupt goes active right at this moment it will loop as\nthe phy_interrupt() handler exits immediately with IRQ_NONE if the halted\nstate is seen. It is unsafe to extend the phydev spinlock to cover\nphy_interrupt(). It is safe to swap the order of the actions though as all\nthe competing places to unmask the interrupt output of the PHY, which are\nphy_change() and phy_timer() are already covered with the lock as is the\nsequence in question.\n\nSigned-off-by: Maciej W. Rozycki \u003cmacro@linux-mips.org\u003e\nCc: Andy Fleming \u003cafleming@freescale.com\u003e\nCc: Jeff Garzik \u003cjgarzik@pobox.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "0ac49527318bc388a881152d60f49d7951606024", "tree": "64b99a7543c913ff17344259b3938d6a5702ef69", "parents": [ "f7ab697d328b0a417d9e3cb891d45693ea89e83d" ], "author": { "name": "Maciej W. Rozycki", "email": "macro@linux-mips.org", "time": "Fri Sep 28 22:42:14 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:53:55 2007 -0700" }, "message": "PHYLIB: IRQ event workqueue handling fixes\n\nKeep track of disable_irq_nosync() invocations and call enable_irq() the\nright number of times if work has been cancelled that would include them.\n\nNow that the call to flush_work_keventd() (problematic because of\nrtnl_mutex being held) has been replaced by cancel_work_sync() another\nissue has arisen and been left unresolved. As the MDIO bus cannot be\naccessed from the interrupt context the PHY interrupt handler uses\ndisable_irq_nosync() to prevent from looping and schedules some work to be\ndone as a softirq, which, apart from handling the state change of the\noriginating PHY, is responsible for reenabling the interrupt. Now if the\ninterrupt line is shared by another device and a call to the softirq\nhandler has been cancelled, that call to enable_irq() never happens and the\nother device cannot use its interrupt anymore as its stuck disabled.\n\nI decided to use a counter rather than a flag because there may be more\nthan one call to phy_change() cancelled in the queue -- a real one and a\nfake one triggered by free_irq() if DEBUG_SHIRQ is used, if nothing else.\nTherefore because of its nesting property enable_irq() has to be called the\nright number of times to match the number disable_irq_nosync() was called\nand restore the original state. This DEBUG_SHIRQ feature is also the\nreason why free_irq() has to be called before cancel_work_sync().\n\nWhile at it I updated the comment about phy_stop_interrupts() being called\nfrom `keventd\u0027 -- this is no longer relevant as the use of\ncancel_work_sync() makes such an approach unnecessary. OTOH a similar\ncomment referring to flush_scheduled_work() in phy_stop() still applies as\nusing cancel_work_sync() there would be dangerous.\n\nChecked with checkpatch.pl and at the run time (with and without\nDEBUG_SHIRQ).\n\nSigned-off-by: Maciej W. Rozycki \u003cmacro@linux-mips.org\u003e\nCc: Andy Fleming \u003cafleming@freescale.com\u003e\nCc: Jeff Garzik \u003cjgarzik@pobox.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "9ff8c68b3c722f732c7a13d6631b149cca8c7091", "tree": "ec0dd0762f9652d30fff30228406bcd0417f6063", "parents": [ "1f8f4559f8c5829348a010a9e0bbb423310060d1" ], "author": { "name": "Maciej W. Rozycki", "email": "macro@linux-mips.org", "time": "Fri Sep 28 22:42:12 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:53:54 2007 -0700" }, "message": "PHYLIB: Spinlock fixes for softirqs\n\nUse spin_lock_bh()/spin_unlock_bh() for the phydev lock throughout as it\nis used in phy_timer() that is called as a softirq and all the other\noperations may happen in the user context.\n\nThere has been a change recently that did such a conversion for some of the\noperations on the lock, but some have been left intact. Many of them,\nperhaps all, may be called in the user context and I was able to trigger\nrecursive spinlock acquisition indeed, so I think for the sake of long-term\nmaintenance it is best to convert them all, even if unnecessarily for one\nor two -- better safe than sorry.\n\nPerhaps one in phy_timer() could actually be skipped as only called as a\nsoftirq -- I can send an update if that sounds like a good idea.\n\nChecked with checkpatch.pl and at the runtime.\n\nSigned-off-by: Maciej W. Rozycki \u003cmacro@linux-mips.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "7c32f470f4f6a0fdc6944cefcd22f288e59a0ae2", "tree": "747a4c855e6b6287421eb854496d23073315ba49", "parents": [ "cdcc520d7b73445c3552a70786afed9a2b22c010" ], "author": { "name": "Vitaly Bordug", "email": "vitb@kernel.crashing.org", "time": "Fri Aug 10 14:05:16 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:53:50 2007 -0700" }, "message": "PHY fixed driver: rework release path and update phy_id notation\n\ndevice_bind_driver() error code returning has been fixed. release()\nfunction has been written, so that to free resources in correct way; the\nrelease path is now clean.\n\nBefore the rework, it used to cause\n Device \u0027fixed@100:1\u0027 does not have a release() function, it is broken\n and must be fixed.\n BUG: at drivers/base/core.c:104 device_release()\n\n Call Trace:\n [\u003cffffffff802ec380\u003e] kobject_cleanup+0x53/0x7e\n [\u003cffffffff802ec3ab\u003e] kobject_release+0x0/0x9\n [\u003cffffffff802ecf3f\u003e] kref_put+0x74/0x81\n [\u003cffffffff8035493b\u003e] fixed_mdio_register_device+0x230/0x265\n [\u003cffffffff80564d31\u003e] fixed_init+0x1f/0x35\n [\u003cffffffff802071a4\u003e] init+0x147/0x2fb\n [\u003cffffffff80223b6e\u003e] schedule_tail+0x36/0x92\n [\u003cffffffff8020a678\u003e] child_rip+0xa/0x12\n [\u003cffffffff80311714\u003e] acpi_ds_init_one_object+0x0/0x83\n [\u003cffffffff8020705d\u003e] init+0x0/0x2fb\n [\u003cffffffff8020a66e\u003e] child_rip+0x0/0x12\n\nAlso changed the notation of the fixed phy definition on\nmdio bus to the form of \u003cspeed\u003e+\u003cduplex\u003e to make it able to be used by\ngianfar and ucc_geth that define phy_id strictly as \"%d:%d\" and cleaned up\nthe whitespace issues.\n\nSigned-off-by: Vitaly Bordug \u003cvitb@kernel.crashing.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "ff8ac60948ba819b89e9c87083e8050fc2f89999", "tree": "611975d22d7ddd8c49a073c61e6e4b7c9523fedb", "parents": [ "10d024c1b2fd58af8362670d7d6e5ae52fc33353" ], "author": { "name": "Denis Cheng", "email": "crquan@gmail.com", "time": "Sun Sep 02 18:30:18 2007 +0800" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Wed Oct 10 16:51:15 2007 -0700" }, "message": "drivers/net/: all drivers/net/ cleanup with ARRAY_SIZE\n\nSigned-off-by: Denis Cheng \u003ccrquan@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "680e9fe9d69ea86e81c859932bfd751be91cc0e0", "tree": "ab35407f25dffa417563dbf7a544c7327cc95e4f", "parents": [ "a07bc1ffaeee9f05490193f66915ac086c6ea5c9" ], "author": { "name": "Domen Puncer", "email": "domen@coderock.org", "time": "Mon Sep 17 22:21:40 2007 +0200" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Thu Sep 20 02:35:50 2007 -0400" }, "message": "phy: export phy_mii_ioctl\n\nExport phy_mii_ioctl, so network drivers can use it when built\nas modules too.\n\nSigned-off-by: Domen Puncer \u003cdomen@coderock.org\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "026d7917e592f91063861e002adf1c806d7756ae", "tree": "02a5de4f89634c0e8a5b119df7fc4ee91f15da37", "parents": [ "d1b139c039704c391ab47c6c9540c28f7fcaa489" ], "author": { "name": "Hans-Jürgen Koch", "email": "hjk@linutronix.de", "time": "Fri Aug 31 14:30:08 2007 +0200" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Thu Sep 13 00:12:43 2007 -0400" }, "message": "Fix a lock problem in generic phy code\n\nLock debugging finds a problem in phy.c and phy_device.c,\nthis patch fixes it. Tested on an AT91SAM9263-EK board,\nkernel 2.6.23-rc4.\n\nSigned-off-by: Hans J. Koch \u003chjk@linutronix.de\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "bc1e0a095e9b8c4df4a2eedd7dc6a9d470a0e6b7", "tree": "38ce820cda8cff12b6ba69fb209f240fba3f37aa", "parents": [ "09e06f652d86d358583df0b601c0c4d11923dd88" ], "author": { "name": "Domen Puncer", "email": "domen.puncer@telargo.com", "time": "Fri Aug 17 08:54:45 2007 +0200" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Aug 25 02:31:02 2007 -0400" }, "message": "phy layer: fix genphy_setup_forced (don\u0027t reset)\n\nWriting BMCR_RESET bit will reset MII_BMCR to default values. This is\nclearly not what we want.\n\nSigned-off-by: Domen Puncer \u003cdomen.puncer@telargo.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "163642a24a44d7b1d1e1b3cb8da25a142a919e24", "tree": "cb19da0a3161e82f70e127c66f04193790284308", "parents": [ "44a5b3d539893988dc6b63054c59d031df1fd7bc" ], "author": { "name": "Domen Puncer", "email": "domen.puncer@telargo.com", "time": "Tue Aug 07 12:12:41 2007 +0200" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Tue Aug 07 17:34:13 2007 -0400" }, "message": "phy layer: fix phy_mii_ioctl for autonegotiation\n\nFix a thinko (?) in setting phydev-\u003eautoneg.\n\nSigned-off-by: Domen Puncer \u003cdomen.puncer@telargo.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "52cb1c2b70d9d2a81e842b90456b7a8158541ffd", "tree": "82ad0bd34225bd2b2b02e461d7941d7fe2c46543", "parents": [ "fe6d3a4049ec9d859d75ddfcc6865a0f58178924" ], "author": { "name": "Andy Fleming", "email": "afleming@freescale.com", "time": "Wed Jul 18 01:06:28 2007 -0500" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Tue Jul 24 16:28:41 2007 -0400" }, "message": "Fix error checking in Vitesse IRQ config\n\nphy_read() returns a negative number if there\u0027s an error, but the\nerror-checking code in the Vitesse driver\u0027s config_intr function\ntriggers if phy_read() returns non-zero. Correct that.\n\nSigned-off-by: Andy Fleming \u003cafleming@freescale.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "af2d940df2b60b15c271033d381c2f3ead655562", "tree": "367711410500a4fd7736e2e0ff5036506597857d", "parents": [ "cc65185d400c4e8698ff1c1b59f90bd491e9bda5" ], "author": { "name": "Andy Fleming", "email": "afleming@freescale.com", "time": "Wed Jul 11 11:42:35 2007 -0500" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Wed Jul 18 18:29:37 2007 -0400" }, "message": "Fix Vitesse RGMII-ID support\n\nThe Vitesse PHY on the 8641D needs to be set up with internal delay to\nwork in RGMII mode. So we add skew when it is set to RGMII_ID mode.\n\nSigned-off-by: Andy Fleming \u003cafleming@freescale.com\u003e\nSigned-off-by: Haruki Dai \u003cDai.Haruki@freescale.com\u003e\nSigned-off-by: Haiying Wang \u003cHaiying.Wang@freescale.com\u003e\n" }, { "commit": "1d5e83aac54b64b71b225fd5cf2e82491ad145f6", "tree": "c815c595c104997f017102ed04ec33cffb8cd309", "parents": [ "5bae7ac9feba925fd0099057f6b23d7be80b7b41" ], "author": { "name": "Andy Fleming", "email": "afleming@freescale.com", "time": "Tue Jul 10 16:42:04 2007 -0500" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Wed Jul 18 18:29:37 2007 -0400" }, "message": "Fix Vitesse 824x PHY interrupt acking\n\nThe Vitesse 824x PHY doesn\u0027t allow an interrupt to be cleared if\nthe mask bit for that interrupt isn\u0027t set. This means that the PHY\nLib\u0027s order of handling interrupts (disable, then clear) breaks on this\nPHY. However, clearing then disabling the interrupt opens up the code\nfor a silly race condition. So rather than change the PHY Lib, we change\nthe Vitesse driver so it always clears interrupts before disabling them.\nFurther, the ack function only clears the interrupt if interrupts are\nenabled.\n\nSigned-off-by: Andy Fleming \u003cafleming@freescale.com\u003e\nSigned-off-by: York Sun \u003cyorksun@freescale.com\u003e\nAcked-by: Haiying Wang \u003cHaiying.Wang@freescale.com\u003e\n" }, { "commit": "85cfb534280dd6a7c7ac399bb2888e1b8b286ece", "tree": "708aaf539c3ed203b5460901c9a4896f82fe6a2a", "parents": [ "e54792396fb658b97e2f7b0541c6334020e1a3ec" ], "author": { "name": "Olof Johansson", "email": "olof@lixom.net", "time": "Tue Jul 03 16:24:32 2007 -0500" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Tue Jul 10 12:41:09 2007 -0400" }, "message": "phylib: Add Marvell 88E1112 phy id\n\nAdd 88E1112 PHY ID to the marvell driver. Seems to do fine with the\n88E1111 inits.\n\nSigned-off-by: Olof Johansson \u003colof@lixom.net\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "e54792396fb658b97e2f7b0541c6334020e1a3ec", "tree": "e1854134dca300195f9c26f83d149ee24c52045e", "parents": [ "825a2ff1896ec3ead94bebef60c71f57254da58a" ], "author": { "name": "Olof Johansson", "email": "olof@lixom.net", "time": "Tue Jul 03 16:23:46 2007 -0500" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Tue Jul 10 12:41:09 2007 -0400" }, "message": "phylib: cleanup marvell.c a bit\n\nSimplify the marvell driver init a bit: Make the supported devices an\narray instead of explicitly registering each structure. This makes it\nconsiderably easier to add new devices down the road.\n\nSigned-off-by: Olof Johansson \u003colof@lixom.net\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "4117b5be4b877cec7c34058f0c239fcf78274e3d", "tree": "cd6af1d2edf385af102d654ac13ef4dcc3af6332", "parents": [ "d3c12873c36005263286cf5660663c8c10f9d2b5" ], "author": { "name": "Kapil Juneja", "email": "Kapil.Juneja@freescale.com", "time": "Fri May 11 18:25:18 2007 -0500" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sun Jul 08 22:16:38 2007 -0400" }, "message": "phylib: m88e1111: enable SGMII mode\n\nIf connected via SGMII, initialize with SGMII mode configured.\n\nSigned-off-by: Kapil Juneja \u003cKapil.Juneja@freescale.com\u003e\nSigned-off-by: Andy Fleming \u003cafleming@freescale.com\u003e\nSigned-off-by: Kim Phillips \u003ckim.phillips@freescale.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "0cefeebaf3da39d768bffcf62460fe2088e824ef", "tree": "231a039f1b1032898bfae4c3b9c82181e14f893f", "parents": [ "146bd683cc160d728f1f62a6ddade8451801a8c3" ], "author": { "name": "Michael Barkowski", "email": "michael.barkowski@freescale.com", "time": "Fri May 11 18:24:51 2007 -0500" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sun Jul 08 22:16:38 2007 -0400" }, "message": "phylib: add the ICPlus IP175C PHY driver\n\nThe ICPlus IP175C sports a 100Mbit/s 4-port switch in addition\nto a dedicated 100Mbit/s WAN port.\n\nSigned-off-by: Michael Barkowski \u003cmichael.barkowski@freescale.com\u003e\nSigned-off-by: Kim Phillips \u003ckim.phillips@freescale.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "5f708dd91d15876e26d7a57f97a255cedffca463", "tree": "5492646ee87a183a3c96446738bbe70cdb19b613", "parents": [ "b75ae8603568ae18f270213693758c78fb8a29ff" ], "author": { "name": "Kumar Gala", "email": "galak@kernel.crashing.org", "time": "Thu Jun 28 13:26:06 2007 -0500" }, "committer": { "name": "Kumar Gala", "email": "galak@kernel.crashing.org", "time": "Thu Jun 28 13:26:06 2007 -0500" }, "message": "phy: Fix phy_id for Vitesse 824x PHY\n\nThe phy_id specified for the Vitesse 824x PHY would never match because\nit was expecting bits to be set that would be masked by the phy_id_mask.\nFix the phy_id so it will match properly, and changed the mdio_bus_match\nto mask both the driver and devices phy_id with the mask so we dont have\nthis issue in the future.\n\nSigned-off-by: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\n" }, { "commit": "895ee682db14ed71860e22495280bdee4dae4738", "tree": "f7ce2684c600c8f4367b2a32ad23ee063e7f507c", "parents": [ "dec590c1bb05c1553b68cab7aa3ea36d77e7f9a3" ], "author": { "name": "Kim Phillips", "email": "kim.phillips@freescale.com", "time": "Tue Jun 05 18:46:47 2007 +0800" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Jun 09 18:25:35 2007 -0400" }, "message": "phylib: add RGMII-ID mode to the Marvell m88e1111 PHY to fix broken ucc_geth\n\nSupport for configuring RGMII-ID (RGMII with internal delay) mode on the\n88e1111 and 88e1145. Ucc_geth on MPC8360EMDS(the main user of ucc_geth)\nis broken after changed to use phylib. It is fixed by adding this\ninternal delay.\n\nAlso renamed 88e1111s -\u003e 88e1111 (no references to an 88e1111s part were\nfound), and fixed some whitespace.\n\nSigned-off-by: Kim Phillips \u003ckim.phillips@freescale.com\u003e\nSigned-off-by: Li Yang \u003cleoli@freescale.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "239dc572b8e6ecde91afe96d2426ddc2afd4695d", "tree": "3bd29541a3169c0132ef99cfce182facb00f33e7", "parents": [ "2ed22bc294315d19aa1f0423b83d21a2d94c641b" ], "author": { "name": "Denver Gingerich", "email": "denver@ossguy.com", "time": "Wed May 23 14:34:43 2007 -0700" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Thu May 24 17:20:49 2007 -0400" }, "message": "fix compiler warning in fixed.c\n\nCorrect the following compiler warning (and warnings resulting from\nthe correction):\nwarning: \u0027fixed_mdio_register_device\u0027 defined but not used\n\nSigned-off-by: Denver Gingerich \u003cdenver@ossguy.com\u003e\nCc: Vitaly Bordug \u003cvbordug@ru.mvista.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "12414db11da8789d9a6b549c4899250f6e116630", "tree": "cb419ff60a952922f988618e7b397e8d77d72e77", "parents": [ "f30cac6fbf30d92d517768fdbd616cd196b43d1d" ], "author": { "name": "Kim Phillips", "email": "kim.phillips@freescale.com", "time": "Thu May 10 15:16:04 2007 -0500" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri May 11 17:53:43 2007 -0400" }, "message": "Add support for the Davicom DM9161A PHY\n\nDistinguish between the Davicom DM9161A PHY and the DM9161E.\n\nSigned-off-by: Kim Phillips \u003ckim.phillips@freescale.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "53f99941c1d0bd1d75c9ea7bf4dfcb3ce3ec4b05", "tree": "c471de013f8b8fabaf3d4e6fc1d32353c61a5df1", "parents": [ "a1c38a4a5dd36487b65c4b48e37ecfdd080817f3" ], "author": { "name": "Jan Engelhardt", "email": "jengelh@linux01.gwdg.de", "time": "Thu May 10 22:52:55 2007 -0700" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri May 11 17:53:16 2007 -0400" }, "message": "Use menuconfig objects: PHY\n\nUse menuconfigs instead of menus, so the whole menu can be disabled at once\ninstead of going through all options.\n\nSigned-off-by: Jan Engelhardt \u003cjengelh@gmx.de\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "9556fb73edfc37410cab3b47ae5e94bcecd8edf2", "tree": "dbe5fed3ab9f58f8ab804cb3f243b9259867cf3f", "parents": [ "e25df1205f37c7bff3ab14fdfc8a5249f3c69c82" ], "author": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Thu May 10 15:45:58 2007 +0200" }, "committer": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Thu May 10 15:46:07 2007 +0200" }, "message": "[S390] Kconfig: unwanted menus for s390.\n\nDisable some more menus in the configuration files that are of no\ninterest to a s390 machine.\n\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\n" }, { "commit": "28e53bddf814485699a4142bc056fd37d4e11dd4", "tree": "5182090c4cc2186eedbda3cb90ed82a2836f6ff6", "parents": [ "5830c5902138f80b0a097b797200c739466beedd" ], "author": { "name": "Oleg Nesterov", "email": "oleg@tv-sign.ru", "time": "Wed May 09 02:34:22 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Wed May 09 12:30:53 2007 -0700" }, "message": "unify flush_work/flush_work_keventd and rename it to cancel_work_sync\n\nflush_work(wq, work) doesn\u0027t need the first parameter, we can use cwq-\u003ewq\n(this was possible from the very beginnig, I missed this). So we can unify\nflush_work_keventd and flush_work.\n\nAlso, rename flush_work() to cancel_work_sync() and fix all callers.\nPerhaps this is not the best name, but \"flush_work\" is really bad.\n\n(akpm: this is why the earlier patches bypassed maintainers)\n\nSigned-off-by: Oleg Nesterov \u003coleg@tv-sign.ru\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nCc: \"David S. Miller\" \u003cdavem@davemloft.net\u003e\nCc: Jens Axboe \u003cjens.axboe@oracle.com\u003e\nCc: Tejun Heo \u003chtejun@gmail.com\u003e\nCc: Auke Kok \u003cauke-jan.h.kok@intel.com\u003e,\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" } ], "next": "d0758bc334780d70266c1d1b974ed26f740a0819" }