)]}' { "log": [ { "commit": "cfbf07f2a80b618c42a42c20d83647ea8fcceca0", "tree": "575c9834d1ed69459c79162042647008f2097123", "parents": [ "6a3ee3d5529c5e66aedf91401bfac65c61998639" ], "author": { "name": "Christoph Lameter", "email": "clameter@sgi.com", "time": "Tue May 15 01:42:06 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue May 15 08:54:01 2007 -0700" }, "message": "SLUB: CONFIG_LARGE_ALLOCS must consider MAX_ORDER limit\n\nTake MAX_ORDER into consideration when determining KMALLOC_SHIFT_HIGH.\nOtherwise we may run into a situation where we attempt to create general\nslabs larger than MAX_ORDER.\n\nSigned-off-by: Christoph Lameter \u003cclameter@sgi.com\u003e\nCc: \"David S. Miller\" \u003cdavem@davemloft.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "297d9c035edd04327fedc0d1da27c2b112b66fcc", "tree": "c5a2f1258def2f54790b57afc0bea9dc49563773", "parents": [ "838c41184fee5e151c09972f2ba90c16493af614" ], "author": { "name": "Jeremy Fitzhardinge", "email": "jeremy@goop.org", "time": "Tue May 15 01:41:48 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue May 15 08:54:00 2007 -0700" }, "message": "i386: move common parts of smp into their own file\n\nSeveral parts of kernel/smp.c and smpboot.c are generally useful for other\nsubarchitectures and paravirt_ops implementations, so make them available for\nreuse.\n\nSigned-off-by: Jeremy Fitzhardinge \u003cjeremy@xensource.com\u003e\nAcked-by: Chris Wright \u003cchrisw@sous-sol.org\u003e\nCc: James Bottomley \u003cJames.Bottomley@HansenPartnership.com\u003e\nCc: Eric W. Biederman \u003cebiederm@xmission.com\u003e\nCc: Andi Kleen \u003cak@suse.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "838c41184fee5e151c09972f2ba90c16493af614", "tree": "72dd37c37031f1ed6c4c3ed43a45f3dce8dcf149", "parents": [ "3bd2aad2103314a0a09614dc29926a1437db02f7" ], "author": { "name": "Prarit Bhargava", "email": "prarit@redhat.com", "time": "Tue May 15 01:41:43 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue May 15 08:54:00 2007 -0700" }, "message": "Remove cpu hotplug defines for __INIT \u0026 __INITDATA\n\nAfter examining what was checked in and the code base I discovered that most\nof 86c0baf123e474b6eb404798926ecf62b426bf3a wasn\u0027t necessary anymore....\n\nSo here\u0027s a patch that reverts the last part of that changeset:\n\nRevert part of 86c0baf123e474b6eb404798926ecf62b426bf3a.\n\nThe kernel has moved forward to a state where the original change is not\nnecessary. After porting forward, this final version of the patch was\napplied and broke non-x86 architectures.\n\nSigned-off-by: Prarit Bhargava \u003cprarit@redhat.com\u003e\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "3c46bdcaec53eda069a8a9cd60621c7431aa7842", "tree": "9e3463d9618af5be9195d4cbaef6d3a518ab9e26", "parents": [ "0fcdf96ca95f81a0e1fd91a2de16dc67c641c958" ], "author": { "name": "Geert Uytterhoeven", "email": "geert@linux-m68k.org", "time": "Tue May 15 01:41:29 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue May 15 08:54:00 2007 -0700" }, "message": "m68k: implement __clear_user()\n\nm68k: implement __clear_user(), which is needed by fs/signalfd.c\n\nSince we always let the MMU do all checking, clear_user() and __clear_user()\nare identical. The old clear_user() is renamed to __clear_user() for\nconsistency.\n\nSigned-off-by: Geert Uytterhoeven \u003cgeert@linux-m68k.org\u003e\nCc: Davide Libenzi \u003cdavidel@xmailserver.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "0fcdf96ca95f81a0e1fd91a2de16dc67c641c958", "tree": "b8f21a1c70589a0f6d42abf26932a4c83f72462e", "parents": [ "b67405bbbba6bbd28dfd5337b29d5bc5a1140afb" ], "author": { "name": "Simon Horman", "email": "horms@verge.net.au", "time": "Tue May 15 01:41:15 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue May 15 08:54:00 2007 -0700" }, "message": "alpha: fix hard_smp_processor_id compile error\n\n\"Remove hardcoding of hard_smp_processor_id on UP systems\",\n2f4dfe206a2fc07099dfad77a8ea2f4b4ae2140f in Linus\u0027 tree, moved\nthe definition of hard_smp_processor_id linux/smp.h to asm/smp.h\nfor UP systems. This causes a regression on Alpha.\n\ncc1: warnings being treated as errors\narch/alpha/kernel/setup.c: In function \u0027setup_arch\u0027:\narch/alpha/kernel/setup.c:506: warning: implicit declaration of function \u0027hard_smp_processor_id\u0027\nmake[1]: *** [arch/alpha/kernel/setup.o] error 1\nmake: *** [arch/alpha/kernel] error 2\n\nBy including asm/smp.h non-conditionally in asm/mmu_context.h\nthe problem appears to be resolved.\n\nCc: Fernando Luis Vazquez Cao \u003cfernando@oss.ntt.co.jp\u003e\nSigned-off-by: Simon Horman \u003chorms@verge.net.au\u003e\nCc: Richard Henderson \u003crth@twiddle.net\u003e\nCc: Ivan Kokshaysky \u003cink@jurassic.park.msu.ru\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "b67405bbbba6bbd28dfd5337b29d5bc5a1140afb", "tree": "3518c2aa8e6a7c891f9c9f760c04692ba9b82e83", "parents": [ "218f0aaee8a6b0e5772b95b154dea5b7701b33aa" ], "author": { "name": "Yoshinori Sato", "email": "ysato@users.sourceforge.jp", "time": "Tue May 15 01:41:07 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue May 15 08:54:00 2007 -0700" }, "message": "h8300 atomic.h update\n\nadd atomic_sub_and_test define.\n\nSigned-off-by: Yoshinori Sato \u003cysato@users.sourceforge.jp\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "218f0aaee8a6b0e5772b95b154dea5b7701b33aa", "tree": "4fa48f46c89c1b88c49f086278cc9951409152fc", "parents": [ "f0ee9aabb0520adea5937855a9575c08a97b16e7" ], "author": { "name": "Paul Mundt", "email": "lethal@linux-sh.org", "time": "Tue May 15 01:41:02 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue May 15 08:54:00 2007 -0700" }, "message": "nommu: add ioremap_page_range()\n\nlib/ioremap.c is presently only built in if CONFIG_MMU is set. While this\nis reasonable, platforms that support both CONFIG_MMU\u003dy or n need to be\nable to call in to this regardless.\n\nAs none of the current nommu platforms do anything special with ioremap(),\nwe assume that it\u0027s always successful.\n\nThis fixes the SH-4 build with CONFIG_MMU\u003dn.\n\nSigned-off-by: Paul Mundt \u003clethal@linux-sh.org\u003e\nCc: David Howells \u003cdhowells@redhat.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "faa8b6c3c2e1454175609167a25ae525d075f045", "tree": "440b4cb3cc837e22d61776a66415bd3e226f2bba", "parents": [ "3ec2ab5514dbd6b5c4c3437c6a3cd9e5a90e84ef" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon May 14 15:24:24 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon May 14 15:24:24 2007 -0700" }, "message": "Revert \"ipmi: add new IPMI nmi watchdog handling\"\n\nThis reverts commit f64da958dfc83335de1d2bef9d3868f30feb4e53.\n\nAndi Kleen is unhappy with the changes, and they really do not seem\nworth it. IPMI could use DIE_NMI_IPI instead of the new callback, even\nthough that ends up having its own set of problems too, mainly because\nthe IPMI code cannot really know the NMI was from IPMI or not.\n\nManually fix up conflicts in arch/x86_64/kernel/traps.c and\ndrivers/char/ipmi/ipmi_watchdog.c.\n\nCc: Andi Kleen \u003cak@suse.de\u003e\nCc: Mathieu Desnoyers \u003cmathieu.desnoyers@polymtl.ca\u003e\nCc: Corey Minyard \u003cminyard@acm.org\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "3ec2ab5514dbd6b5c4c3437c6a3cd9e5a90e84ef", "tree": "44225691130bac645c033db1f80cc083597f1bb3", "parents": [ "200cfbb36ce360f7943c62b6c09885c215bfc1f5", "90e07d9f54c61449dd48eff82e2354d0124d4f7e" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon May 14 12:29:14 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon May 14 12:29:14 2007 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:\n pxamci: fix PXA27x MMC workaround for bad CRC with 136 bit response\n mmc: use assigned major for block device\n sdhci: handle dma boundary interrupts\n mmc: au1xmmc command types check from data flags\n" }, { "commit": "29e0937bb693879221f575b01f26314b3f443322", "tree": "dd3ed9be21ff200c9d4dd8c708bc2ea1ef3d32f4", "parents": [ "140ff8b0459cac5ade7a42131f561a9ee0fa3cc4", "be35cf01a9889e82da3bbda1d7b161f036424225" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon May 14 12:27:17 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon May 14 12:27:17 2007 -0700" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6\n\n* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:\n [SPARC64]: Update defconfig.\n [VIDEO]: XVR-500 and XVR-2500 need FB\u003dy.\n [SPARC32]: asm/system.h needs asm/smp.h\n [SPARC32]: Update defconfig.\n [SPARC32]: Fix sparc32 kdebug changes.\n [SPARC64]: Accept ebus_bus_type for generic DMA ops.\n [SPARC64]: Add missing cpus_empty() check in hypervisor xcall handling.\n [SCSI]: Add help text for SCSI_ESP_CORE.\n [SPARC] SBUS: display7seg.c needs asm/io.h\n [SPARC] SBUS: bbc_i2c.c needs asm/io.h\n [SPARC64]: Be more resiliant with PCI I/O space regs.\n [SERIAL] SUNHV: Add an ID string.\n" }, { "commit": "140ff8b0459cac5ade7a42131f561a9ee0fa3cc4", "tree": "17a1d6a1b4f0b922d376fb6245e2d7dc2b279cdd", "parents": [ "a34be83a9cfa15d596bfeb498b13380f0544249f" ], "author": { "name": "Stephen Rothwell", "email": "sfr@canb.auug.org.au", "time": "Mon May 14 13:47:47 2007 +1000" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon May 14 12:16:01 2007 -0700" }, "message": "Declare another couple of compat syscalls.\n\ncompat_sys_signalfd and compat_sys_timerfd need declarations before\nPowerPC can wire them up.\n\nSigned-off-by: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "fe6b4c8840c5e23fe9b8696450cee8f2e8cebffd", "tree": "b5812c0950da7c1a32c3f098874aa26b2d4062e5", "parents": [ "6ba736a10e4ae63b38ccfee9f22b3263a6e5d050" ], "author": { "name": "Pierre Ossman", "email": "drzeus@drzeus.cx", "time": "Mon May 14 17:27:29 2007 +0200" }, "committer": { "name": "Pierre Ossman", "email": "drzeus@drzeus.cx", "time": "Mon May 14 18:51:43 2007 +0200" }, "message": "mmc: use assigned major for block device\n\nThe MMC block devices now have an assigned major. Make sure\nwe actually use it.\n\nSigned-off-by: Pierre Ossman \u003cdrzeus@drzeus.cx\u003e\n" }, { "commit": "6e46507d0178ad4b33ed3bfcc72dc6e1e8a17790", "tree": "4317fe09401242551f6acd6d5fb3803ef28ff34d", "parents": [ "2b6d868fa62b51500dd95a036229adc4a4a7bdae" ], "author": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Mon May 14 03:53:47 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Mon May 14 03:53:47 2007 -0700" }, "message": "[SPARC32]: asm/system.h needs asm/smp.h\n\nTo get hard_smp_processor_id() even on UP builds.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "19fce2b96655d2b3b758e0f783314678d89b47c5", "tree": "96378e99346006bff7a823ec1cbcb06e54dc2d0d", "parents": [ "9ac6d4a4b85004dbb907f1d3b34412afe16f3758" ], "author": { "name": "Robert Reif", "email": "reif@earthlink.net", "time": "Mon May 14 03:22:08 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon May 14 03:22:08 2007 -0700" }, "message": "[SPARC32]: Fix sparc32 kdebug changes.\n\nFix recent kdebug changes to compile on sparc32.\n\nSigned-off-by: Robert Reif \u003creif@earthlink.net\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "9ac6d4a4b85004dbb907f1d3b34412afe16f3758", "tree": "0def6b8219fa6b35d41637de0b4977462bb51181", "parents": [ "17f34f0ec96783851abcabf9878f8237ac67e4e7" ], "author": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Mon May 14 02:56:03 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Mon May 14 02:56:03 2007 -0700" }, "message": "[SPARC64]: Accept ebus_bus_type for generic DMA ops.\n\nBased upon a bug report by Meelis Roos.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "f7d02ae76ebbf5b8a9531fe150c49e126a397704", "tree": "bcfdcab6e70658d55a3c843694e04e938bf9168f", "parents": [ "78db2ad6f4df9145bfd6aab1c0f1c56d615288ec", "158304ef09a28c7f2dd37d78f536a4e09ba084a1" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sat May 12 18:11:33 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sat May 12 18:11:33 2007 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm\n\n* \u0027for-linus\u0027 of master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits)\n [ARM] Use new get_irqnr_preamble\n [ARM] Ensure machine class menu is sorted alphabetically\n [ARM] 4333/2: KS8695: Micrel Development board\n [ARM] 4332/2: KS8695: Serial driver\n [ARM] 4331/3: Support for Micrel/Kendin KS8695 processor\n [ARM] 4371/1: AT91: Support for Atmel AT91SAM9RL-EK development board\n [ARM] 4372/1: Define byte sizes in asm-arm/sizes.h\n [ARM] 4370/3: AT91: Support for Atmel AT91SAM9RL processors.\n [ARM] Update mach-types\n [ARM] export symbol csum_partial_copy_from_user\n [ARM] iop13xx: msi support\n [ARM] stacktrace fix\n [ARM] Spinlock initializer cleanup\n [ARM] remove useless config option GENERIC_BUST_SPINLOCK\n [ARM] 4303/3: base kernel support for TI DaVinci\n [ARM] 4369/1: AT91: Fix circular dependency in header files\n [ARM] 4368/1: S3C24xx: build fix\n [ARM] 4364/1: AT91: LEDS on AT91SAM9261-EK\n [ARM] Fix iop32x/iop33x build\n [ARM] EBSA110: fix build errors caused by missing \"const\"\n ...\n" }, { "commit": "78db2ad6f4df9145bfd6aab1c0f1c56d615288ec", "tree": "e27a435c9baf6955f0edc50aa903599a7c465e4c", "parents": [ "07002e995638b83a6987180f43722a0eb39d4932" ], "author": { "name": "Daniel Walker", "email": "dwalker@mvista.com", "time": "Sat May 12 16:28:35 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sat May 12 18:11:06 2007 -0700" }, "message": "include/linux: trivial repair whitespace damage\n\nAdding tabs where spaces currently are.\n\nSigned-off-by: Daniel Walker \u003cdwalker@mvista.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "f1d1a842d85acf34dd185027cb2c9b4fd13130ef", "tree": "99ec45adca911aeb145a56d75a213ebb900b2175", "parents": [ "8df767dd759c1390f604814ee5b2d1489f9a59f7" ], "author": { "name": "Christoph Lameter", "email": "clameter@sgi.com", "time": "Sat May 12 11:15:24 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sat May 12 11:26:22 2007 -0700" }, "message": "SLUB: i386 support\n\nSLUB cannot run on i386 at this point because i386 uses the page-\u003eprivate and\npage-\u003eindex field of slab pages for the pgd cache.\n\nMake SLUB run on i386 by replacing the pgd slab cache with a quicklist.\nLimit the changes as much as possible. Leave the improvised linked list in place\netc etc. This has been working here for a couple of weeks now.\n\nAcked-by: William Lee Irwin III \u003cwli@holomorphy.com\u003e\nSigned-off-by: Christoph Lameter \u003cclameter@sgi.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "158304ef09a28c7f2dd37d78f536a4e09ba084a1", "tree": "2e6d808fef46d70268e547ccfc5926a865e3d2ea", "parents": [ "641e79129a56a4c50be1aed0fa713f440b46a440", "25f4a81ef51b7c279786f5b81fe6d89510f46d99" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Sat May 12 16:12:12 2007 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Sat May 12 16:12:12 2007 +0100" }, "message": "Merge branch \u0027fixes\u0027 into devel\n" }, { "commit": "25f4a81ef51b7c279786f5b81fe6d89510f46d99", "tree": "c8054ad0b03ce5355477ef2645fa2c9ddd6ed643", "parents": [ "487194a19d2069bfcc9791c3ab2204bed59b136a", "e3318fb40092fecbf5069e7a5daa0040a427d1b4" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Sat May 12 16:10:03 2007 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Sat May 12 16:10:24 2007 +0100" }, "message": "Merge branch \u0027omap-fixes\u0027 into fixes\n" }, { "commit": "641e79129a56a4c50be1aed0fa713f440b46a440", "tree": "41831a6b7927d2d392f5dad8cad7ddd38c363315", "parents": [ "3b938be69e46b64a516b6e3ed6d93c40c091f22c" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Sat May 12 15:25:50 2007 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Sat May 12 15:25:50 2007 +0100" }, "message": "[ARM] Use new get_irqnr_preamble\n\nUse the new get_irqnr_preamble macro to move the address of the IRQ\ncontroller outside the IRQ handling loop.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "8354c5b72636e5321e9b16dae1da1445506f6af6", "tree": "16d68e80a5466db3a95dbf5d125196d98d585669", "parents": [ "d037e0532e7dbb5a7936cbc6747206d2352f2974" ], "author": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Fri May 11 22:06:51 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Fri May 11 22:06:51 2007 -0700" }, "message": "[SPARC]: Wire up signalfd/timerfd/eventfd syscalls.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "823777181b4c0200923dcb026efa5b37f55c0ecf", "tree": "cd105b29f0fcbf977715963e120e3b1f919980d3", "parents": [ "48aaae7a2fa46e1ed0d0b7677fde79ccfcb8c963" ], "author": { "name": "Henry Su", "email": "henry.su@amd.com", "time": "Thu May 10 22:48:50 2007 -0700" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri May 11 18:16:01 2007 -0400" }, "message": "Add the combined mode for ATI SB700\n\nBesides those modes in ATI SB600 SATA controller, ATI SB700 supports one\nmore mode:the combined mode.\n\nThe combined mode is a Legacy IDE mode used for compatibility with some old\nOS without AHCI driver, but now it is not necessary for Linux since the\nkernel has supported AHCI.\n\nSigned-off-by: Luugi Marsan \u003cluugi.marsan@amd.com\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nCc: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "e92351bb53c0849fabfa80be53cbf3b0aa166e54", "tree": "cb182d532feb99015e66c7377ecfaf9041153cc2", "parents": [ "8575b814097af648dad284bd3087875a11b13d18" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Sat May 05 23:50:38 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri May 11 18:12:42 2007 -0400" }, "message": "libata-acpi: s/CONFIG_SATA_ACPI/CONFIG_ATA_ACPI/\n\nACPI applies to both SATA and PATA. Drop the \u0027S\u0027 from the config\nvariable.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "f4d6d00466ef4879e4289f18c2f59210a06a7ada", "tree": "60a0ec3c2872f1f21c2b546af3e04990b3bfa60b", "parents": [ "1626aeb881236c8cb022b5e4ca594146a951d669" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Tue May 01 11:50:15 2007 +0200" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri May 11 18:09:18 2007 -0400" }, "message": "libata: ignore EH scheduling during initialization\n\nlibata enables SCSI host during ATA host activation which happens\nafter IRQ handler is registered and IRQ is enabled. All ATA ports are\nin frozen state when IRQ is enabled but frozen ports may raise limited\nnumber of IRQs after being frozen - IOW, -\u003efreeze() is not responsible\nfor clearing pending IRQs. During normal operation, the IRQ handler\nis responsible for clearing spurious IRQs on frozen ports and it\nusually doesn\u0027t require any extra code.\n\nUnfortunately, during host initialization, the IRQ handler can end up\nscheduling EH for a port whose SCSI host isn\u0027t initialized yet. This\nresults in OOPS in the SCSI midlayer. This is relatively short window\nand scheduling EH for probing is the first thing libata does after\ninitialization, so ignoring EH scheduling until initialization is\ncomplete solves the problem nicely.\n\nThis problem was spotted by Berck E. Nash in the following thread.\n\n http://thread.gmane.org/gmane.linux.kernel/519412\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nCc: Berck E. Nash \u003cflyboy@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "1626aeb881236c8cb022b5e4ca594146a951d669", "tree": "30f3457e4b5d76e62ee192fcc0d52b0ee8a829df", "parents": [ "920a4b1038e442700a1cfac77ea7e20bd615a2c3" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Fri May 04 12:43:58 2007 +0200" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri May 11 18:09:18 2007 -0400" }, "message": "libata: clean up SFF init mess\n\nThe intention of using port_mask in SFF init helpers was to eventually\nsupport exoctic configurations such as combination of legacy and\nnative port on the same controller. This never became actually\nnecessary and the related code always has been subtly broken one way\nor the other. Now that new init model is in place, there is no reason\nto make common helpers capable of handling all corner cases. Exotic\ncases can simply dealt within LLDs as necessary.\n\nThis patch removes port_mask handling in SFF init helpers. SFF init\nhelpers don\u0027t take n_ports argument and interpret it into port_mask\nanymore. All information is carried via port_info. n_ports argument\nis dropped and always two ports are allocated. LLD can tell SFF to\nskip certain port by marking it dummy. Note that SFF code has been\ntreating unuvailable ports this way for a long time until recent\nbreakage fix from Linus and is consistent with how other drivers\nhandle with unavailable ports.\n\nThis fixes 1-port legacy host handling still broken after the recent\nnative mode fix and simplifies SFF init logic. The following changes\nare made...\n\n* ata_pci_init_native_host() and ata_init_legacy_host() both now try\n to initialized whatever they can and mark failed ports dummy. They\n return 0 if any port is successfully initialized.\n\n* ata_pci_prepare_native_host() and ata_pci_init_one() now doesn\u0027t\n take n_ports argument. All info should be specified via port_info\n array. Always two ports are allocated.\n\n* ata_pci_init_bmdma() exported to be used by LLDs in exotic cases.\n\n* port_info handling in all LLDs are standardized - all port_info\n arrays are const stack variable named ppi. Unless the second port\n is different from the first, its port_info is specified as NULL\n (tells libata that it\u0027s identical to the last non-NULL port_info).\n\n* pata_hpt37x/hpt3x2n: don\u0027t modify static variable directly. Make an\n on-stack copy instead as ata_piix does.\n\n* pata_uli: It has 4 ports instead of 2. Don\u0027t use\n ata_pci_prepare_native_host(). Allocate the host explicitly and use\n init helpers. It\u0027s simple enough.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "9666f4009c22f6520ac3fb8a19c9e32ab973e828", "tree": "eaac13cd5890af6298e5576a48c29891f0890bd1", "parents": [ "0a3fd051c7036ef71b58863f8e5da7c3dabd9d3f" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Fri May 04 21:27:47 2007 +0200" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri May 11 18:01:03 2007 -0400" }, "message": "libata: reimplement suspend/resume support using sdev-\u003emanage_start_stop\n\nReimplement suspend/resume support using sdev-\u003emanage_start_stop.\n\n* Device suspend/resume is now SCSI layer\u0027s responsibility and the\n code is simplified a lot.\n\n* DPM is dropped. This also simplifies code a lot. Suspend/resume\n status is port-wide now.\n\n* ata_scsi_device_suspend/resume() and ata_dev_ready() removed.\n\n* Resume now has to wait for disk to spin up before proceeding. I\n couldn\u0027t find easy way out as libata is in EH waiting for the\n disk to be ready and sd is waiting for EH to complete to issue\n START_STOP.\n\n* sdev-\u003emanage_start_stop is set to 1 in ata_scsi_slave_config().\n This fixes spindown on shutdown and suspend-to-disk.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "2c7ee6ab7cb7261aacea91d41da8df1874772f3f", "tree": "63e24f302030571fc367fa4ae76308d660ac12ec", "parents": [ "c53c9cf60e49119e97d38390849cac5b2f0a0981" ], "author": { "name": "Andrew Victor", "email": "andrew@sanpeople.com", "time": "Fri May 11 21:37:25 2007 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Fri May 11 22:02:52 2007 +0100" }, "message": "[ARM] 4332/2: KS8695: Serial driver\n\nA driver for the KS8695 internal UART.\n\nBased on the 2.6.9 driver from Micrel.\n\nSigned-off-by: Andrew Victor \u003candrew@sanpeople.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "c53c9cf60e49119e97d38390849cac5b2f0a0981", "tree": "37615dedbbd8980b8357df47d90843eb86d017ff", "parents": [ "c42dcb3dcfd3a473ab7c79c2ae91fc1c2e4dc5db" ], "author": { "name": "Andrew Victor", "email": "andrew@sanpeople.com", "time": "Fri May 11 21:01:28 2007 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Fri May 11 22:02:48 2007 +0100" }, "message": "[ARM] 4331/3: Support for Micrel/Kendin KS8695 processor\n\nAdd core support for the Kendin/Micrel KS8695 processor family.\n\nIt is an ARM922-T based SoC with integrated USART, 4-port Ethernet\nSwitch, WAN Ethernet port, and optional PCI Host bridge, etc.\n http://www.micrel.com/page.do?page\u003dproduct-info/sys_on_chip.jsp\n\nThis patch is based on earlier patches from Lennert Buytenhek, Ben\nDooks and Greg Ungerer posted to the arm-linux-kernel mailing list in\nMarch 2006; and Micrel\u0027s 2.6.9 port.\n\nSigned-off-by: Andrew Victor \u003candrew@sanpeople.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "54cb128037de499ea81626b0f37f9bb90e8db3d3", "tree": "26cedd628b87e0fe3c36dcbbcf39fc016bd044b4", "parents": [ "877d7720f5f67793b9b6027840d2c88ea25dc4c8" ], "author": { "name": "Andrew Victor", "email": "andrew@sanpeople.com", "time": "Fri May 11 20:09:41 2007 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Fri May 11 21:07:58 2007 +0100" }, "message": "[ARM] 4372/1: Define byte sizes in asm-arm/sizes.h\n\nDefine SZ_512, SZ_256 and SZ_16 in asm-arm/sizes.h.\nRemove the definitions from the at91*_devices.c files.\n\n(Dependent on ARM patch #4370/2)\n\nSigned-off-by: Andrew Victor \u003candrew@sanpeople.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "877d7720f5f67793b9b6027840d2c88ea25dc4c8", "tree": "7f906238239dba97f26e9e78da359b958436d7f5", "parents": [ "9da7cf23a4f9690ceecfd0184cd050be564416f1" ], "author": { "name": "Andrew Victor", "email": "andrew@sanpeople.com", "time": "Fri May 11 20:49:56 2007 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Fri May 11 21:07:54 2007 +0100" }, "message": "[ARM] 4370/3: AT91: Support for Atmel AT91SAM9RL processors.\n\nAdd support for Atmel\u0027s new AT91SAM9RL range of processors.\nIncludes similar peripherals as other AT91SAM9 processors, but with a\nHigh-speed USB controller and various sizes of internal SRAM.\n\nSigned-off-by: Nicolas Ferre \u003cnicolas.ferre@rfo.atmel.com\u003e\nSigned-off-by: Andrew Victor \u003candrew@sanpeople.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "0a3fd051c7036ef71b58863f8e5da7c3dabd9d3f", "tree": "43388a81494ded94008afff66777f9f6e8cb5484", "parents": [ "57a44415beee38d1afcd8e1b5fad66f3414d2dac", "c911d1e16dfc1f0338bbc245ff724322c0113395" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 12:58:37 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 12:58:37 2007 -0700" }, "message": "Merge branch \u0027linus\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa\n\n* \u0027linus\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (122 commits)\n [ALSA] version 1.0.14rc4\n [ALSA] Add speaker pin sequencing to hda_codec.c:snd_hda_parse_pin_def_config()\n [ALSA] hda-codec - Add ALC861VD Lenovo support\n [ALSA] hda-codec - Fix connection list in generic parser\n [ALSA] usb-audio: work around wrong wMaxPacketSize on ESI M4U\n [ALSA] usb-audio: work around broken M-Audio MidiSport Uno firmware\n [ALSA] usb-audio: explicitly match Logitech QuickCam\n [ALSA] hda-codec - Fix a typo\n [ALSA] hda-codec - Fix ALC880 uniwill auto-mutes\n [ALSA] hda-codec - Fix AD1988 SPDIF playback route control\n [ALSA] wm8750 typo fix\n [ALSA] wavefront: only declare isapnp on CONFIG_PNP\n [ALSA] hda-codec - bug fixes for stac92xx HDA codecs.\n [ALSA] add MODULE_FIRMWARE entries\n [ALSA] do not depend on FW_LOADER when internal firmware images are used\n [ALSA] hda-codec - Fix resume of STAC92xx codecs\n [ALSA] usbaudio - Revert the minimal period size fix patch\n [ALSA] hda-codec - Add support for new HP DV series laptops\n [ALSA] usb-audio - Fix the minimum period size per transfer mode\n [ALSA] sound/pcmcia/vx/vxpocket.c: fix an if() condition\n ...\n" }, { "commit": "57a44415beee38d1afcd8e1b5fad66f3414d2dac", "tree": "365eada15165e37e153b6d304142db16f251438b", "parents": [ "2a383c63ff933a496f19d6559ab54ac14871b7f3", "bbe2486fe3bd6c7cffaf4123b7e86a55c209ed44" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 12:57:16 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 12:57:16 2007 -0700" }, "message": "Merge branch \u0027master\u0027 of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb\n\n* \u0027master\u0027 of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (44 commits)\n V4L/DVB (5571): V4l1-compat: Make VIDIOCSPICT return errors in a useful way\n V4L/DVB (5624): Radio-maestro.c cleanup\n V4L/DVB (5623): Dsbr100.c Replace usb_dsbr100_do_ioctl to use video_ioctl2\n V4L/DVB (5622): Radio-zoltrix.c cleanup\n V4L/DVB (5621): Radio-cadet.c Replace cadet_do_ioctl to use video_ioctl2\n V4L/DVB (5619): Dvb-usb: fix typo\n V4L/DVB (5618): Cx88: Drop the generic i2c client from cx88-vp3054-i2c\n V4L/DVB (5617): V4L2: videodev, allow debugging\n V4L/DVB (5614): M920x: Disable second adapter on LifeView TV Walker Twin\n V4L/DVB (5613): M920x: loosen up 80-col limit\n V4L/DVB (5612): M920x: rename function prefixes from m9206_foo to m920x_foo\n V4L/DVB (5611): M920x: replace deb_rc with deb\n V4L/DVB (5610): M920x: remove duplicated code\n V4L/DVB (5609): M920x: group like functions together\n V4L/DVB (5608): M920x: various whitespace cleanups\n V4L/DVB (5607): M920x: Initial support for devices likely manufactured by Dposh\n V4L/DVB (5606): M920x: add \"c-basic-offset: 8\" to help emacs to enforce tabbing\n V4L/DVB (5605): M920x: Add support for LifeView TV Walker Twin\n V4L/DVB (5603): V4L: Prevent queueing queued buffers.\n V4L/DVB (5602): Enable DiSEqC in Starbox II (vp7021a)\n ...\n" }, { "commit": "2a383c63ff933a496f19d6559ab54ac14871b7f3", "tree": "b0f4a4fbc4d882c7fea7c6b8f69924284abff76d", "parents": [ "8bd994815987dda0947bd9afd887b1410713d4f7", "2bd62a40f63bd628c43a2f3637b252d0967659b0" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 12:53:21 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 12:53:21 2007 -0700" }, "message": "Merge branch \u0027release\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6\n\n* \u0027release\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:\n [IA64] Quicklist support for IA64\n [IA64] fix Kprobes reentrancy\n [IA64] SN: validate smp_affinity mask on intr redirect\n [IA64] drivers/char/snsc_event.c:206: warning: unused variable `p\u0027\n [IA64] mca.c:121: warning: \u0027cpe_poll_timer\u0027 defined but not used\n [IA64] Fix - Section mismatch: reference to .init.data:mvec_name\n [IA64] more warning cleanups\n [IA64] Wire up epoll_pwait and utimensat\n [IA64] Fix warnings resulting from type-checking in dev_dbg()\n [IA64] typo s/kenrel/kernel/\n" }, { "commit": "1f8a6b658a943b4f04a1fc7b3a420360202c86cd", "tree": "b1edcfde47fcef004ca2c2901ed98d915ac00dbd", "parents": [ "0c4ea957c6ec953d84cc07346437abe0ae4bb57d", "1039592d6fe3221c406b02d7341ef4212bc25020" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 10:30:00 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 10:30:00 2007 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:\n further UTF-8 fixes and name correction\n Fix wrong identifier name in Documentation/kref.txt\n" }, { "commit": "1039592d6fe3221c406b02d7341ef4212bc25020", "tree": "2597628a465dc228729ad90e52aab136b5cc4ba7", "parents": [ "b7cc4a879c4fed0adea23e9931d7b1944d103d2b" ], "author": { "name": "David Woodhouse", "email": "dwmw2@infradead.org", "time": "Fri May 11 19:09:46 2007 +0200" }, "committer": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Fri May 11 19:09:46 2007 +0200" }, "message": "further UTF-8 fixes and name correction\n\n\u003e -** Copyright 1994 by Bj\u003c94\u003ern Brauel\n\u003e +** Copyright 1994 by Bj”rn Brauel\n\nI think these were cp437, and it should read \u0027Björn\u0027.\n(asm-m68k/atari*.h)\n\nAlso note that Arnaldo just put more legacy noise into CREDITS...\n\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\n" }, { "commit": "0c4ea957c6ec953d84cc07346437abe0ae4bb57d", "tree": "aea0141a8afb37743604aa909c6ea7362367ae25", "parents": [ "f2c60ed038dedcc43a0eb3ef4e0602741ba90384", "df9f54084f1faf611cedd846d38b0631f9d4e9a5" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 10:00:50 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 10:00:50 2007 -0700" }, "message": "Merge branch \u0027upstream\u0027 of git://ftp.linux-mips.org/pub/scm/upstream-ip22\n\n* \u0027upstream\u0027 of git://ftp.linux-mips.org/pub/scm/upstream-ip22:\n Convert SGI IP22 and specific drivers to platform_device.\n" }, { "commit": "f2c60ed038dedcc43a0eb3ef4e0602741ba90384", "tree": "1d06b6c080e1c164d87b66f8cc4b13203378b85a", "parents": [ "cabca0cb0d0e8579428d8f8c3f606e2f01d26d14", "3f2d560e9029ec0b7edf8be0c32425f4bb57d582" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 09:59:50 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 09:59:50 2007 -0700" }, "message": "Merge branch \u0027upstream\u0027 of git://ftp.linux-mips.org/pub/scm/upstream-linus\n\n* \u0027upstream\u0027 of git://ftp.linux-mips.org/pub/scm/upstream-linus: (28 commits)\n [MIPS] Rework cobalt_board_id\n [MIPS] Use RTC_CMOS for Cobalt\n [MIPS] Use platform_device for Cobalt UART\n [MIPS] Separate Alchemy processor based boards config\n [MIPS] Fix build error in atomic64_cmpxchg\n [MIPS] Run checksyscalls for N32 and O32 ABI\n [MIPS] tlbex: use __maybe_unused\n [MIPS] excite: use __maybe_unused\n [MIPS] Add extern cobalt_board_id\n [MIPS] Remove unused CONFIG_TOSHIBA_BOARDS\n [MIPS] Rename tb0229_defconfig to tb0219_defconfig\n [MIPS] Update tb0229_defconfig; add CONFIG_GPIO_TB0219.\n [MIPS] Add minimum defconfig for RBHMA4200\n [MIPS] SB1: Build fix.\n [MIPS] Drop __devinit tag from allocate_irqno() and free_irqno()\n [MIPS] clocksource: use CLOCKSOURCE_MASK() macro\n [MIPS] Remove LIMITED_DMA support\n [MIPS] Remove Momenco Jaguar ATX support\n [MIPS] Remove Momenco Ocelot G support\n [MIPS] FPU hazard handling\n ...\n" }, { "commit": "cabca0cb0d0e8579428d8f8c3f606e2f01d26d14", "tree": "a32426d345bab465488df20a228a495a12b26b8b", "parents": [ "853da0022023c046e0a5ccc51d427745f0c94de7", "87c1efbfeac49849b981a7eac8cba42d4a49b2e9" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 09:58:49 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 09:58:49 2007 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.dk/data/git/linux-2.6-block\n\n* \u0027for-linus\u0027 of git://git.kernel.dk/data/git/linux-2.6-block:\n Fix compile/link of init/do_mounts.c with !CONFIG_BLOCK\n When stacked block devices are in-use (e.g. md or dm), the recursive calls\n" }, { "commit": "853da0022023c046e0a5ccc51d427745f0c94de7", "tree": "bc36f80f00aa11c3c239a80ecf04ba8238219ce8", "parents": [ "5884c40668a928bba017eaf54e2eb3c01c8a98e6", "0a4ff8c2598b72f2fa9d50aae9e1809e684dbf41" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 09:57:16 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 09:57:16 2007 -0700" }, "message": "Merge branch \u0027audit.b38\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current\n\n* \u0027audit.b38\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:\n [PATCH] Abnormal End of Processes\n [PATCH] match audit name data\n [PATCH] complete message queue auditing\n [PATCH] audit inode for all xattr syscalls\n [PATCH] initialize name osid\n [PATCH] audit signal recipients\n [PATCH] add SIGNAL syscall class (v3)\n [PATCH] auditing ptrace\n" }, { "commit": "5884c40668a928bba017eaf54e2eb3c01c8a98e6", "tree": "240bdf1b015f0bc2ce8c1811bd0b528c1ef386c2", "parents": [ "ee54d2d87a8158d14434c1a3274bd7f713105836", "cdcb44e87bedcf5070eece61f89f9373a3810031" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 09:56:05 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 09:56:05 2007 -0700" }, "message": "Merge branch \u0027upstream-fixes\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid\n\n* \u0027upstream-fixes\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid:\n USB HID: hiddev - fix race between hiddev_send_event() and hiddev_release()\n HID: add hooks for getkeycode() and setkeycode() methods\n HID: switch to using input_dev-\u003edev.parent\n USB HID: Logitech wheel 0x046d/0xc294 needs HID_QUIRK_NOGET quirk\n USB HID: usb_buffer_free() cleanup\n USB HID: report descriptor of Cypress USB barcode readers needs fixup\n Bluetooth HID: HIDP - don\u0027t initialize force feedback\n USB HID: update CONFIG_USB_HIDINPUT_POWERBOOK description\n HID: add input mappings for non-working keys on Logitech S510 remote\n" }, { "commit": "2fd0237538480c8d704c385b6f9abc3f6c46b760", "tree": "4f4052fb01ec00d4717bc7741602e02aa9833ef6", "parents": [ "87b247c41674e29f90bf4938799ab079951ccc6b" ], "author": { "name": "Daniel Wolstenholme", "email": "daniel.e.wolstenholme@intel.com", "time": "Thu May 10 22:33:02 2007 -0700" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Fri May 11 17:41:52 2007 +0100" }, "message": "[ARM] iop13xx: msi support\n\nEnable devices to signal interrupts via PCI memory cycles.\n\nrev6:\n* fix enable/disable typo, Michael Ellerman\n\nrev5:\n* fix up ack, enable, and disable for iop13xx_msi_chip\n\nrev4:\n* move smp compile fix to separate patch\n* use dynamic_irq_init in create_irq()\n* hookup mask/unmask routines in iop13xx_msi_chip\n\nrev3:\n* change msi.c to use linux/smp.h instead of asm/smp.h\n* call dynamic_irq_cleanup at destroy_irq time\n\nrev2:\n* destroy_irq did not take the full 128 bits of msi_irq_in_use into account\n* added missing \u0027\u0026\u0027 for calls to test_and_set_bit and clear_bit\n\n[ebiederm@xmission.com: review comments/suggestions]\n[dan.j.williams@intel.com: cleanups/forward port to 2.6-git]\nSigned-off-by: Daniel Wolstenholme \u003cdaniel.e.wolstenholme@intel.com\u003e\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\nAcked-by: Eric W. Biederman \u003cebiederm@xmission.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "2bd62a40f63bd628c43a2f3637b252d0967659b0", "tree": "73b5dbda741421812f487ff0a9b753109fb105b4", "parents": [ "cdc7dbdfe6edac177acb32e4ca56b525d0743fe7" ], "author": { "name": "Christoph Lameter", "email": "clameter@sgi.com", "time": "Thu May 10 22:42:53 2007 -0700" }, "committer": { "name": "Tony Luck", "email": "tony.luck@intel.com", "time": "Fri May 11 09:40:00 2007 -0700" }, "message": "[IA64] Quicklist support for IA64\n\nIA64 is the origin of the quicklist implementation. So cut out the pieces\nthat are now in core code and modify the functions called.\n\nSigned-off-by: Christoph Lameter \u003cclameter@sgi.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Tony Luck \u003ctony.luck@intel.com\u003e\n" }, { "commit": "cdc7dbdfe6edac177acb32e4ca56b525d0743fe7", "tree": "739b21d116a24185eb1704cdcf64206043de2f20", "parents": [ "25d61578daae697c4a0eb817f42a868af9824f82" ], "author": { "name": "Anil S Keshavamurthy", "email": "anil.s.keshavamurthy@intel.com", "time": "Fri May 11 09:38:40 2007 -0700" }, "committer": { "name": "Tony Luck", "email": "tony.luck@intel.com", "time": "Fri May 11 09:38:40 2007 -0700" }, "message": "[IA64] fix Kprobes reentrancy\n\nIn case of reentrance i.e when a probe handler calls a functions which\ninturn has a probe, we save a previous kprobe information and just single\nstep the reentrant probe without calling the actual probe handler. During\nthis reentracy period, if an interrupt occurs and if probe happens to\ntrigger in the inturrupt path, then we were corrupting the previous kprobe(\nas we were overriding the previous kprobe info) info their by crashing the\nsystem. This patch fixes this issues by having a an array of previous\nkprobe info struct(with the array size of 2).\n\nThis similar technique is not needed on i386 and x86_64 because by default\ninterrupts are turn off in the break/int3 exception handler.\n\nSigned-off-by: Anil S Keshavamurthy \u003canil.s.keshavamurthy@intel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Tony Luck \u003ctony.luck@intel.com\u003e\n" }, { "commit": "25d61578daae697c4a0eb817f42a868af9824f82", "tree": "ec4ac10132f0b12a822dba6a53d05bab78ec3760", "parents": [ "3e3d32770204ea24cf71919a90d9ccfc2bd407dd" ], "author": { "name": "John Keller", "email": "jpk@sgi.com", "time": "Thu May 10 22:42:44 2007 -0700" }, "committer": { "name": "Tony Luck", "email": "tony.luck@intel.com", "time": "Fri May 11 09:35:38 2007 -0700" }, "message": "[IA64] SN: validate smp_affinity mask on intr redirect\n\nOn SN, only allow one bit to be set in the smp_affinty mask when\nredirecting an interrupt. Currently setting multiple bits is allowed, but\nonly the first bit is used in determining the CPU to redirect to. This has\ncaused confusion among some customers.\n\n[akpm@linux-foundation.org: fixes]\nSigned-off-by: John Keller \u003cjpk@sgi.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Tony Luck \u003ctony.luck@intel.com\u003e\n" }, { "commit": "7c6337e225364870e9bf02a3ae277d9fdea483f8", "tree": "1ba5819dfc424beea0086cd3b855839be29370dd", "parents": [ "7fdc7849d2f9f926cbaec224bbcbacb164b07b23" ], "author": { "name": "Kevin Hilman", "email": "khilman@mvista.com", "time": "Mon Apr 30 19:37:19 2007 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Fri May 11 17:26:55 2007 +0100" }, "message": "[ARM] 4303/3: base kernel support for TI DaVinci\n\nAdd base kernel support for the TI DaVinci platform.\n\nThis patch only includes interrupts, timers, CPU identification,\nserial support and basic power and sleep controller init. More\ndrivers to come.\n\nSigned-off-by: Kevin Hilman \u003ckhilman@mvista.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "030f4810e782e541468d36c27e721b582b7820a4", "tree": "f1dcab0f3335a2fa8a8cda69b44aa58b82ea0094", "parents": [ "f7538ac95200fd122fd84c8f85ff1130ee7645b5" ], "author": { "name": "Andrew Victor", "email": "andrew@sanpeople.com", "time": "Fri May 11 13:21:27 2007 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Fri May 11 17:20:31 2007 +0100" }, "message": "[ARM] 4369/1: AT91: Fix circular dependency in header files\n\nResolve the circular dependency in the AT91 header files (io.h and\nhardware.h) by moving the at91_sys_read() and at91_sys_write() functions\nto io.h\n\nSigned-off-by: Andrew Victor \u003candrew@sanpeople.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "f75fd965d500d33720948f30d409c6c7729a80af", "tree": "ce2ae1a7c8586b545d27830c2d9d229914bc659c", "parents": [ "3b11e449b3a8d9b912d80e28f62985f22a70e87f" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Wed May 09 20:21:11 2007 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Fri May 11 17:20:06 2007 +0100" }, "message": "[ARM] Fix iop32x/iop33x build\n\narch/arm/plat-iop/io.c:26: error: conflicting types for \u0027__iop3xx_ioremap\u0027\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "b8b6970b4fe08397554295b0c5169bec7575f7c9", "tree": "429e80c7b12321b1f26806d0222e4b38939c69a8", "parents": [ "c9184f58cac9efa5d7d90a0e979f398a99d91641" ], "author": { "name": "Graeme Gregory", "email": "gg@opensource.wolfsonmicro.com", "time": "Wed May 09 15:55:24 2007 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Fri May 11 17:19:26 2007 +0100" }, "message": "[ARM] 4365/1: Add AC97 clock to s3c2443 machine\n\nThis adds the ac97 clock to the s3c2443 machine files. It seems to\nhave been simply missed out previously.\n\nSigned-off-by: Graeme Gregory \u003cgg@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "10bdaaa0fad620145cf10e2b573266b2d80b44de", "tree": "8d3200f5041ab0fdc72e9245ef780310b27a18d8", "parents": [ "c7b87f3d5037a35b5c7bb916ffc826be3fcb208d" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Thu May 10 18:40:51 2007 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Fri May 11 17:19:02 2007 +0100" }, "message": "[ARM] ecard: add ecardm_iomap() / ecardm_iounmap()\n\nAdd devres ecardm_iomap() and ecardm_iounmap() for Acorn expansion\ncards. Convert all expansion card drivers to use them.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "c7b87f3d5037a35b5c7bb916ffc826be3fcb208d", "tree": "57fb9d7bb21965fa0d78b26043cf459ce51a9668", "parents": [ "129a84de2347002f09721cda3155ccfd19fade40" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Thu May 10 16:46:13 2007 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Fri May 11 17:18:55 2007 +0100" }, "message": "[ARM] ecard: add helper function for setting ecard irq ops\n\nRather than having every driver fiddle about setting its private\nIRQ operations and data, provide a helper function to contain\nthis functionality in one place.\n\nArrange to remove the driver-private IRQ operations and data when\nthe device is removed from the driver, and remove the driver\nprivate code to do this.\n\nThis fixes potential problems caused by drivers forgetting to\nremove these hooks.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "ee54d2d87a8158d14434c1a3274bd7f713105836", "tree": "cd3e1f6fc0a7fc920e4153c01f35ff7bd92d79da", "parents": [ "bf61f8d357e5d71d74a3ca3be3cce52bf1a2c01a", "da0dd231436ba7e81789e93dd933d7a275e1709d" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 09:10:19 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 09:10:19 2007 -0700" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\n* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (31 commits)\n [NETFILTER]: xt_conntrack: add compat support\n [NETFILTER]: iptable_raw: ignore short packets sent by SOCK_RAW sockets\n [NETFILTER]: iptable_{filter,mangle}: more descriptive \"happy cracking\" message\n [NETFILTER]: nf_nat: Clears helper private area when NATing\n [NETFILTER]: ctnetlink: clear helper area and handle unchanged helper\n [NETFILTER]: nf_conntrack: Removes unused destroy operation of l3proto\n [NETFILTER]: nf_conntrack: Removes duplicated declarations\n [NETFILTER]: nf_nat: remove unused argument of function allocating binding\n [NETFILTER]: Clean up table initialization\n [NET_SCHED]: Avoid requeue warning on dev_deactivate\n [NET_SCHED]: Reread dev-\u003eqdisc for NETDEV_TX_OK\n [NET_SCHED]: Rationalise return value of qdisc_restart\n [NET]: Fix dev-\u003eqdisc race for NETDEV_TX_LOCKED case\n [UDP]: Fix AF-specific references in AF-agnostic code.\n [IrDA]: KingSun/DonShine USB IrDA dongle support.\n [IPV6] ROUTE: Assign rt6i_idev for ip6_{prohibit,blk_hole}_entry.\n [IPV6]: Do no rely on skb-\u003edst before it is assigned.\n [IPV6]: Send ICMPv6 error on scope violations.\n [SCTP]: Do not include ABORT chunk header in the notification.\n [SCTP]: Correctly copy addresses in sctp_copy_laddrs\n ...\n" }, { "commit": "df9f54084f1faf611cedd846d38b0631f9d4e9a5", "tree": "a4e5f46b26a761d62d79d5b367e885cc8a88b4b6", "parents": [ "129a84de2347002f09721cda3155ccfd19fade40" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Fri May 11 15:48:58 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Fri May 11 17:00:29 2007 +0100" }, "message": "Convert SGI IP22 and specific drivers to platform_device.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "14340586148e7c88d7b1b752876f5b5227b200b9", "tree": "91a0d77c94b3d62e83e9cea0b5e3adedd91244fd", "parents": [ "f23a06f076173c1f56572556169bf9e1793c5d59" ], "author": { "name": "Nicolas Ferre", "email": "nicolas.ferre@rfo.atmel.com", "time": "Thu May 10 22:23:26 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:37 2007 -0700" }, "message": "atmel_lcdfb: AT91/AT32 LCD Controller framebuffer driver\n\nAdds a framebuffer driver to ATMEL AT91SAM9x and AT32 aka AVR32 platforms.\nThose chips share quite the same IP and this code is suitable for both\narchitectures.\n\nSigned-off-by: Nicolas Ferre \u003cnicolas.ferre@rfo.atmel.com\u003e\nSigned-off-by: Antonino Daplas \u003cadaplas@gmail.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "f23a06f076173c1f56572556169bf9e1793c5d59", "tree": "926f086ef9160fbe343e39f0bdcbc45b022028ac", "parents": [ "e98e267c6f76f509cea4b4022ca502b1aa221d77" ], "author": { "name": "Krzysztof Helt", "email": "krzysztof.h1@wp.pl", "time": "Thu May 10 22:23:25 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:37 2007 -0700" }, "message": "pm3fb: Preliminary 2.4 to 2.6 port\n\nThis is a basic port from 2.4 kernel to 2.6. Acceleration is lost and big\nendian support probably too. The driver works in 8, 16 and 32 bit mode.\n\n[adaplas]\n- change VESA_* to FB_BLANK_* constants\n- removed unused function clear_memory\n- fix uninitialized variable compiler warning\n- some whitespace cleaning\n\n[akpm@linux-foundation.org: Nuke pestiferous CVS string]\nSigned-off-by: Krzysztof Helt \u003ckrzysztof.h1@wp.pl\u003e\nSigned-off-by: Antonino Daplas \u003cadaplas@gmail.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "9c3060bedd84144653a2ad7bea32389f65598d40", "tree": "80336eb24be8458cda1f35ee752f05bc7c329fbb", "parents": [ "fdb902b1225e1668315f38e96d2f439452c03a15" ], "author": { "name": "Davide Libenzi", "email": "davidel@xmailserver.org", "time": "Thu May 10 22:23:21 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:37 2007 -0700" }, "message": "signal/timer/event: KAIO eventfd support example\n\nThis is an example about how to add eventfd support to the current KAIO code,\nin order to enable KAIO to post readiness events to a pollable fd (hence\ncompatible with POSIX select/poll). The KAIO code simply signals the eventfd\nfd when events are ready, and this triggers a POLLIN in the fd. This patch\nuses a reserved for future use member of the struct iocb to pass an eventfd\nfile descriptor, that KAIO will use to post events every time a request\ncompletes. At that point, an aio_getevents() will return the completed result\nto a struct io_event. I made a quick test program to verify the patch, and it\nruns fine here:\n\nhttp://www.xmailserver.org/eventfd-aio-test.c\n\nThe test program uses poll(2), but it\u0027d, of course, work with select and epoll\ntoo.\n\nThis can allow to schedule both block I/O and other poll-able devices\nrequests, and wait for results using select/poll/epoll. In a typical\nscenario, an application would submit KAIO request using aio_submit(), and\nwill also use epoll_ctl() on the whole other class of devices (that with the\naddition of signals, timers and user events, now it\u0027s pretty much complete),\nand then would:\n\n\tepoll_wait(...);\n\tfor_each_event {\n\t\tif (curr_event_is_kaiofd) {\n\t\t\taio_getevents();\n\t\t\tdispatch_aio_events();\n\t\t} else {\n\t\t\tdispatch_epoll_event();\n\t\t}\n\t}\n\nSigned-off-by: Davide Libenzi \u003cdavidel@xmailserver.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "fdb902b1225e1668315f38e96d2f439452c03a15", "tree": "6751950608a7635df899bc5f20184754342b94a6", "parents": [ "e1ad7468c77ddb94b0615d5f50fa255525fde0f0" ], "author": { "name": "Davide Libenzi", "email": "davidel@xmailserver.org", "time": "Thu May 10 22:23:20 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:37 2007 -0700" }, "message": "signal/timer/event: eventfd wire up x86 arches\n\nThis patch wires the eventfd system call to the x86 architectures.\n\nSigned-off-by: Davide Libenzi \u003cdavidel@xmailserver.org\u003e\nCc: Michael Kerrisk \u003cmtk-manpages@gmx.net\u003e\nCc: Andi Kleen \u003cak@suse.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "e1ad7468c77ddb94b0615d5f50fa255525fde0f0", "tree": "856be1a028fece7e1fa10b7b585096839913fe2e", "parents": [ "83f5d1266926c75890f1bc4678e49d79483cb573" ], "author": { "name": "Davide Libenzi", "email": "davidel@xmailserver.org", "time": "Thu May 10 22:23:19 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:36 2007 -0700" }, "message": "signal/timer/event: eventfd core\n\nThis is a very simple and light file descriptor, that can be used as event\nwait/dispatch by userspace (both wait and dispatch) and by the kernel\n(dispatch only). It can be used instead of pipe(2) in all cases where those\nwould simply be used to signal events. Their kernel overhead is much lower\nthan pipes, and they do not consume two fds. When used in the kernel, it can\noffer an fd-bridge to enable, for example, functionalities like KAIO or\nsyslets/threadlets to signal to an fd the completion of certain operations.\nBut more in general, an eventfd can be used by the kernel to signal readiness,\nin a POSIX poll/select way, of interfaces that would otherwise be incompatible\nwith it. The API is:\n\nint eventfd(unsigned int count);\n\nThe eventfd API accepts an initial \"count\" parameter, and returns an eventfd\nfd. It supports poll(2) (POLLIN, POLLOUT, POLLERR), read(2) and write(2).\n\nThe POLLIN flag is raised when the internal counter is greater than zero.\n\nThe POLLOUT flag is raised when at least a value of \"1\" can be written to the\ninternal counter.\n\nThe POLLERR flag is raised when an overflow in the counter value is detected.\n\nThe write(2) operation can never overflow the counter, since it blocks (unless\nO_NONBLOCK is set, in which case -EAGAIN is returned).\n\nBut the eventfd_signal() function can do it, since it\u0027s supposed to not sleep\nduring its operation.\n\nThe read(2) function reads the __u64 counter value, and reset the internal\nvalue to zero. If the value read is equal to (__u64) -1, an overflow happened\non the internal counter (due to 2^64 eventfd_signal() posts that has never\nbeen retired - unlickely, but possible).\n\nThe write(2) call writes an __u64 count value, and adds it to the current\ncounter. The eventfd fd supports O_NONBLOCK also.\n\nOn the kernel side, we have:\n\nstruct file *eventfd_fget(int fd);\nint eventfd_signal(struct file *file, unsigned int n);\n\nThe eventfd_fget() should be called to get a struct file* from an eventfd fd\n(this is an fget() + check of f_op being an eventfd fops pointer).\n\nThe kernel can then call eventfd_signal() every time it wants to post an event\nto userspace. The eventfd_signal() function can be called from any context.\nAn eventfd() simple test and bench is available here:\n\nhttp://www.xmailserver.org/eventfd-bench.c\n\nThis is the eventfd-based version of pipetest-4 (pipe(2) based):\n\nhttp://www.xmailserver.org/pipetest-4.c\n\nNot that performance matters much in the eventfd case, but eventfd-bench\nshows almost as double as performance than pipetest-4.\n\n[akpm@linux-foundation.org: fix i386 build]\n[akpm@linux-foundation.org: add sys_eventfd to sys_ni.c]\nSigned-off-by: Davide Libenzi \u003cdavidel@xmailserver.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "83f5d1266926c75890f1bc4678e49d79483cb573", "tree": "ae97719503b7fe3688413655d89772bb8b644312", "parents": [ "57ac8898508638ca6d15ecd8b911a431d673ff30" ], "author": { "name": "Davide Libenzi", "email": "davidel@xmailserver.org", "time": "Thu May 10 22:23:18 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:36 2007 -0700" }, "message": "signal/timer/event: timerfd compat code\n\nThis patch implements the necessary compat code for the timerfd system call.\n\nSigned-off-by: Davide Libenzi \u003cdavidel@xmailserver.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "57ac8898508638ca6d15ecd8b911a431d673ff30", "tree": "0e4f5a9b5fe0e1495e9e60486dc8e0defe0dbd9d", "parents": [ "b215e283992899650c4271e7385c79e26fb9a88e" ], "author": { "name": "Davide Libenzi", "email": "davidel@xmailserver.org", "time": "Thu May 10 22:23:17 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:36 2007 -0700" }, "message": "signal/timer/event: timerfd wire up x86 arches\n\nThis patch wires the timerfd system call to the x86 architectures.\n\nSigned-off-by: Davide Libenzi \u003cdavidel@xmailserver.org\u003e\nCc: Andi Kleen \u003cak@suse.de\u003e\nCc: Michael Kerrisk \u003cmtk-manpages@gmx.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "b215e283992899650c4271e7385c79e26fb9a88e", "tree": "3f950814510422606821f1b0b373d65e4d9ed303", "parents": [ "6d18c9220965b437287c3a7e803725c24992ceac" ], "author": { "name": "Davide Libenzi", "email": "davidel@xmailserver.org", "time": "Thu May 10 22:23:16 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:36 2007 -0700" }, "message": "signal/timer/event: timerfd core\n\nThis patch introduces a new system call for timers events delivered though\nfile descriptors. This allows timer event to be used with standard POSIX\npoll(2), select(2) and read(2). As a consequence of supporting the Linux\nf_op-\u003epoll subsystem, they can be used with epoll(2) too.\n\nThe system call is defined as:\n\nint timerfd(int ufd, int clockid, int flags, const struct itimerspec *utmr);\n\nThe \"ufd\" parameter allows for re-use (re-programming) of an existing timerfd\nw/out going through the close/open cycle (same as signalfd). If \"ufd\" is -1,\ns new file descriptor will be created, otherwise the existing \"ufd\" will be\nre-programmed.\n\nThe \"clockid\" parameter is either CLOCK_MONOTONIC or CLOCK_REALTIME. The time\nspecified in the \"utmr-\u003eit_value\" parameter is the expiry time for the timer.\n\nIf the TFD_TIMER_ABSTIME flag is set in \"flags\", this is an absolute time,\notherwise it\u0027s a relative time.\n\nIf the time specified in the \"utmr-\u003eit_interval\" is not zero (.tv_sec \u003d\u003d 0,\ntv_nsec \u003d\u003d 0), this is the period at which the following ticks should be\ngenerated.\n\nThe \"utmr-\u003eit_interval\" should be set to zero if only one tick is requested.\nSetting the \"utmr-\u003eit_value\" to zero will disable the timer, or will create a\ntimerfd without the timer enabled.\n\nThe function returns the new (or same, in case \"ufd\" is a valid timerfd\ndescriptor) file, or -1 in case of error.\n\nAs stated before, the timerfd file descriptor supports poll(2), select(2) and\nepoll(2). When a timer event happened on the timerfd, a POLLIN mask will be\nreturned.\n\nThe read(2) call can be used, and it will return a u32 variable holding the\nnumber of \"ticks\" that happened on the interface since the last call to\nread(2). The read(2) call supportes the O_NONBLOCK flag too, and EAGAIN will\nbe returned if no ticks happened.\n\nA quick test program, shows timerfd working correctly on my amd64 box:\n\nhttp://www.xmailserver.org/timerfd-test.c\n\n[akpm@linux-foundation.org: add sys_timerfd to sys_ni.c]\nSigned-off-by: Davide Libenzi \u003cdavidel@xmailserver.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "2121e24bd8dd16b4e3f8d995428e2a748d5180cc", "tree": "c949b7712111e43e7287714a465bd13c8e9d5f02", "parents": [ "fba2afaaec790dc5ab4ae8827972f342211bbb86" ], "author": { "name": "Davide Libenzi", "email": "davidel@xmailserver.org", "time": "Thu May 10 22:23:14 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:36 2007 -0700" }, "message": "signal/timer/event: signalfd wire up x86 arches\n\nThis patch wires the signalfd system call to the x86 architectures.\n\nSigned-off-by: Davide Libenzi \u003cdavidel@xmailserver.org\u003e\nCc: Michael Kerrisk \u003cmtk-manpages@gmx.net\u003e\nCc: Andi Kleen \u003cak@suse.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "fba2afaaec790dc5ab4ae8827972f342211bbb86", "tree": "2694d4cd8c6b7d69a5569b92151d61a3d4af39b7", "parents": [ "5dc8bf8132d59c03fe2562bce165c2f03f021687" ], "author": { "name": "Davide Libenzi", "email": "davidel@xmailserver.org", "time": "Thu May 10 22:23:13 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:36 2007 -0700" }, "message": "signal/timer/event: signalfd core\n\nThis patch series implements the new signalfd() system call.\n\nI took part of the original Linus code (and you know how badly it can be\nbroken :), and I added even more breakage ;) Signals are fetched from the same\nsignal queue used by the process, so signalfd will compete with standard\nkernel delivery in dequeue_signal(). If you want to reliably fetch signals on\nthe signalfd file, you need to block them with sigprocmask(SIG_BLOCK). This\nseems to be working fine on my Dual Opteron machine. I made a quick test\nprogram for it:\n\nhttp://www.xmailserver.org/signafd-test.c\n\nThe signalfd() system call implements signal delivery into a file descriptor\nreceiver. The signalfd file descriptor if created with the following API:\n\nint signalfd(int ufd, const sigset_t *mask, size_t masksize);\n\nThe \"ufd\" parameter allows to change an existing signalfd sigmask, w/out going\nto close/create cycle (Linus idea). Use \"ufd\" \u003d\u003d -1 if you want a brand new\nsignalfd file.\n\nThe \"mask\" allows to specify the signal mask of signals that we are interested\nin. The \"masksize\" parameter is the size of \"mask\".\n\nThe signalfd fd supports the poll(2) and read(2) system calls. The poll(2)\nwill return POLLIN when signals are available to be dequeued. As a direct\nconsequence of supporting the Linux poll subsystem, the signalfd fd can use\nused together with epoll(2) too.\n\nThe read(2) system call will return a \"struct signalfd_siginfo\" structure in\nthe userspace supplied buffer. The return value is the number of bytes copied\nin the supplied buffer, or -1 in case of error. The read(2) call can also\nreturn 0, in case the sighand structure to which the signalfd was attached,\nhas been orphaned. The O_NONBLOCK flag is also supported, and read(2) will\nreturn -EAGAIN in case no signal is available.\n\nIf the size of the buffer passed to read(2) is lower than sizeof(struct\nsignalfd_siginfo), -EINVAL is returned. A read from the signalfd can also\nreturn -ERESTARTSYS in case a signal hits the process. The format of the\nstruct signalfd_siginfo is, and the valid fields depends of the (-\u003ecode \u0026\n__SI_MASK) value, in the same way a struct siginfo would:\n\nstruct signalfd_siginfo {\n\t__u32 signo;\t/* si_signo */\n\t__s32 err;\t/* si_errno */\n\t__s32 code;\t/* si_code */\n\t__u32 pid;\t/* si_pid */\n\t__u32 uid;\t/* si_uid */\n\t__s32 fd;\t/* si_fd */\n\t__u32 tid;\t/* si_fd */\n\t__u32 band;\t/* si_band */\n\t__u32 overrun;\t/* si_overrun */\n\t__u32 trapno;\t/* si_trapno */\n\t__s32 status;\t/* si_status */\n\t__s32 svint;\t/* si_int */\n\t__u64 svptr;\t/* si_ptr */\n\t__u64 utime;\t/* si_utime */\n\t__u64 stime;\t/* si_stime */\n\t__u64 addr;\t/* si_addr */\n};\n\n[akpm@linux-foundation.org: fix signalfd_copyinfo() on i386]\nSigned-off-by: Davide Libenzi \u003cdavidel@xmailserver.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "5dc8bf8132d59c03fe2562bce165c2f03f021687", "tree": "308e2acb2264c21c93d57b3fb9fb4869e162aa85", "parents": [ "325aa33da784e5997c756a151bc46e9cc9b79db2" ], "author": { "name": "Davide Libenzi", "email": "davidel@xmailserver.org", "time": "Thu May 10 22:23:11 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:36 2007 -0700" }, "message": "signal/timer/event fds: anonymous inode source\n\nThis patch add an anonymous inode source, to be used for files that need\nand inode only in order to create a file*. We do not care of having an\ninode for each file, and we do not even care of having different names in\nthe associated dentries (dentry names will be same for classes of file*).\nThis allow code reuse, and will be used by epoll, signalfd and timerfd\n(and whatever else there\u0027ll be).\n\nSigned-off-by: Davide Libenzi \u003cdavidel@xmailserver.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "325aa33da784e5997c756a151bc46e9cc9b79db2", "tree": "0046d436780537739ba65eabff092f6094d1820a", "parents": [ "fa0334f19f0e1a1e570fc2a160dfe53536599ade" ], "author": { "name": "Sukadev Bhattiprolu", "email": "sukadev@us.ibm.com", "time": "Thu May 10 22:23:10 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:36 2007 -0700" }, "message": "Don\u0027t init pgrp and __session in INIT_SIGNALS\n\nRemove initialization of pgrp and __session in INIT_SIGNALS, as these are\nlater set by the call to __set_special_pids() in init/main.c by the patch:\n\n\texplicitly-set-pgid-and-sid-of-init-process.patch\n\nSigned-off-by: Sukadev Bhattiprolu \u003csukadev@us.ibm.com\u003e\nCc: Cedric Le Goater \u003cclg@fr.ibm.com\u003e\nCc: Dave Hansen \u003chaveblue@us.ibm.com\u003e\nCc: Serge Hallyn \u003cserue@us.ibm.com\u003e\nCc: Eric Biederman \u003cebiederm@xmission.com\u003e\nCc: Oleg Nesterov \u003coleg@tv-sign.ru\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "820e45db2380eb1545fa2bc5d34b8b2f2933faeb", "tree": "426e89e9205e44559d949d9cdf8bf1035bdc3710", "parents": [ "e713d0dab21a68500720e222fa02567fc7dfb14b" ], "author": { "name": "Sukadev Bhattiprolu", "email": "sukadev@us.ibm.com", "time": "Thu May 10 22:23:00 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:35 2007 -0700" }, "message": "statically initialize struct pid for swapper\n\nStatically initialize a struct pid for the swapper process (pid_t \u003d\u003d 0) and\nattach it to init_task. This is needed so task_pid(), task_pgrp() and\ntask_session() interfaces work on the swapper process also.\n\nSigned-off-by: Sukadev Bhattiprolu \u003csukadev@us.ibm.com\u003e\nCc: Cedric Le Goater \u003cclg@fr.ibm.com\u003e\nCc: Dave Hansen \u003chaveblue@us.ibm.com\u003e\nCc: Serge Hallyn \u003cserue@us.ibm.com\u003e\nCc: Eric Biederman \u003cebiederm@xmission.com\u003e\nCc: Herbert Poetzl \u003cherbert@13thfloor.at\u003e\nCc: \u003ccontainers@lists.osdl.org\u003e\nAcked-by: Eric W. Biederman \u003cebiederm@xmission.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "e713d0dab21a68500720e222fa02567fc7dfb14b", "tree": "a56f90ce94d9287b73da6db72ed0e73542a70a07", "parents": [ "4ac24b3ba9016881b11646114bb5cd12cf23edd9" ], "author": { "name": "Sukadev Bhattiprolu", "email": "sukadev@us.ibm.com", "time": "Thu May 10 22:22:58 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:35 2007 -0700" }, "message": "attach_pid() with struct pid parameter\n\nattach_pid() currently takes a pid_t and then uses find_pid() to find the\ncorresponding struct pid. Sometimes we already have the struct pid. We can\nthen skip find_pid() if attach_pid() were to take a struct pid parameter.\n\nSigned-off-by: Sukadev Bhattiprolu \u003csukadev@us.ibm.com\u003e\nCc: Cedric Le Goater \u003cclg@fr.ibm.com\u003e\nCc: Dave Hansen \u003chaveblue@us.ibm.com\u003e\nCc: Serge Hallyn \u003cserue@us.ibm.com\u003e\nCc: \u003ccontainers@lists.osdl.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "0ea971801625184a91a6d80ea85e53875caa0bf5", "tree": "6f4144b7ba809fccfe6d75314df8c348596c9a01", "parents": [ "e10cc1df1d2014f68a4bdcf73f6dd122c4561f94" ], "author": { "name": "Miklos Szeredi", "email": "mszeredi@suse.cz", "time": "Thu May 10 22:22:51 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:35 2007 -0700" }, "message": "consolidate generic_writepages and mpage_writepages\n\nClean up massive code duplication between mpage_writepages() and\ngeneric_writepages().\n\nThe new generic function, write_cache_pages() takes a function pointer\nargument, which will be called for each page to be written.\n\nMaybe cifs_writepages() too can use this infrastructure, but I\u0027m not\ntouching that with a ten-foot pole.\n\nThe upcoming page writeback support in fuse will also want this.\n\nSigned-off-by: Miklos Szeredi \u003cmszeredi@suse.cz\u003e\nAcked-by: Christoph Hellwig \u003chch@infradead.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "e10cc1df1d2014f68a4bdcf73f6dd122c4561f94", "tree": "e528fde48ca3b09168d8879a57fb220195c4e8ea", "parents": [ "108f39a1b3b1e4b28ca8cc156f06171445499d21" ], "author": { "name": "Paul Fulghum", "email": "paulkf@microgate.com", "time": "Thu May 10 22:22:50 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:35 2007 -0700" }, "message": "tty: add compat_ioctl\n\nAdd compat_ioctl method for tty code to allow processing of 32 bit ioctl\ncalls on 64 bit systems by tty core, tty drivers, and line disciplines.\n\nBased on patch by Arnd Bergmann:\nhttp://www.uwsg.iu.edu/hypermail/linux/kernel/0511.0/1732.html\n\n[akpm@linux-foundation.org: make things static]\nSigned-off-by: Paul Fulghum \u003cpaulkf@microgate.com\u003e\nAcked-by: Arnd Bergmann \u003carnd@arndb.de\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "108f39a1b3b1e4b28ca8cc156f06171445499d21", "tree": "73eecb1b29b9ba256ae7bc11babfd2e5b34eb5a1", "parents": [ "98091696653e8ac32a2653589923acd8198777ac" ], "author": { "name": "Rene Herman", "email": "rene.herman@gmail.com", "time": "Thu May 10 22:22:50 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:35 2007 -0700" }, "message": "module_author: don\u0027t advise putting in an email address\n\nmodule_author: don\u0027t advise putting in an email address\n\nIt\u0027s information that\u0027s easily outdated and easily mistaken for a driver\ncontact which is a problem especially for modules with multiple current and\nnon-current authors as well as for modules with a maintainer who may not\neven be a module author.\n\nSigned-off-by: Rene Herman \u003crene.herman@gmail.com\u003e\nCc: Rusty Russell \u003crusty@rustcorp.com.au\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "2d3fbbb391e280724f7f7804ab00ff61cf1b6a4c", "tree": "218b942ae24cd22c7b8309a650d3e7273db3796c", "parents": [ "e1fa2e136ff64a3814a98c03d46320b9e80d29c8" ], "author": { "name": "Benjamin Herrenschmidt", "email": "benh@kernel.crashing.org", "time": "Thu May 10 22:22:46 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:34 2007 -0700" }, "message": "Add hard_irq_disable()\n\nSome architectures, like powerpc, implement lazy disabling of interrupts.\nThat means that on those, local_irq_disable() doesn\u0027t actually disable\ninterrupts on the CPU, but only sets some per CPU flag which cause them to be\ndisabled only if an interrupt actually occurs.\n\nHowever, in some cases, such as stop_machine, we really want interrupts to be\nfully disabled. For example, I have code using stop machine to do ECC error\ninjection, used to verify operations of the ECC hardware, that sort of thing.\nIt really needs to make sure that nothing is actually writing to memory while\nthe injection happens. Similar examples can be found in other low level bits\nand pieces.\n\nThis patch implements a generic hard_irq_disable() function which is meant to\nbe called -after- local_irq_disable() and ensures that interrupts are fully\ndisabled on that CPU. The default implementation is a nop, though powerpc\ndoes already provide an appropriate one.\n\nSigned-off-by: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nCc: Rusty Russell \u003crusty@rustcorp.com.au\u003e\nCc: Paul Mackerras \u003cpaulus@samba.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "e1fa2e136ff64a3814a98c03d46320b9e80d29c8", "tree": "14620d6f3361274139cccded4b38dc7e0347a593", "parents": [ "2acdb1694494eb6f17b44b2b3065879af32d0d46" ], "author": { "name": "Benjamin Herrenschmidt", "email": "benh@kernel.crashing.org", "time": "Thu May 10 22:22:45 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:34 2007 -0700" }, "message": "powerpc: fixup hard_irq_disable semantics\n\nThis patch renames the raw hard_irq_{enable,disable} into\n__hard_irq_{enable,disable} and introduces a higher level hard_irq_disable()\nfunction that can be used by any code to enforce that IRQs are fully disabled,\nnot only lazy disabled.\n\nThe difference with the __ versions is that it will update some per-processor\nfields so that the kernel keeps track and properly re-enables them in the next\nlocal_irq_disable();\n\nThis prepares powerpc for my next patch that introduces hard_irq_disable()\ngenerically.\n\nSigned-off-by: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nCc: Rusty Russell \u003crusty@rustcorp.com.au\u003e\nCc: Paul Mackerras \u003cpaulus@samba.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "2acdb1694494eb6f17b44b2b3065879af32d0d46", "tree": "c9d53e5082ac8e2e80aa228c95102661e0822978", "parents": [ "4c64c30a5c96bb798cbd6097d4996205b5359fa2" ], "author": { "name": "Paul Fulghum", "email": "paulkf@microgate.com", "time": "Thu May 10 22:22:43 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:34 2007 -0700" }, "message": "synclink_gt: add compat_ioctl\n\nAdd support for 32 bit ioctl on 64 bit systems for synclink_gt\n\nCc: Arnd Bergmann \u003carnd@arndb.de\u003e\nSigned-off-by: Paul Fulghum \u003cpaulkf@microgate.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "04dd08b45be863f016df648a149ade1411608d00", "tree": "9787f5d7b1fb808873e68209df9496e54509dab4", "parents": [ "99eaf3c45fe806c4a7f39b9be4a1bd0dfc617699" ], "author": { "name": "Stephen Rothwell", "email": "sfr@canb.auug.org.au", "time": "Thu May 10 22:22:40 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:34 2007 -0700" }, "message": "Consolidate asm/poll.h\n\nThese files are almost all the same.\n\nThis patch could be made even simpler if we don\u0027t mind POLLREMOVE turning\nup in a few architectures that didn\u0027t have it previously (which should be\nOK as POLLREMOVE is not used anywhere in the current tree).\n\nSigned-off-by: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\nCc: \u003clinux-arch@vger.kernel.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "99eaf3c45fe806c4a7f39b9be4a1bd0dfc617699", "tree": "9da206b2faaae7dc3804df2adea4cbf7f117208c", "parents": [ "6eaeeaba39e5fa3d52a0bb8de15e995516ae251a" ], "author": { "name": "Randy Dunlap", "email": "randy.dunlap@oracle.com", "time": "Thu May 10 22:22:39 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:34 2007 -0700" }, "message": "lib/hexdump\n\nBased on ace_dump_mem() from Grant Likely for the Xilinx SystemACE\nCompactFlash interface.\n\nAdd print_hex_dump() \u0026 hex_dumper() to lib/hexdump.c and linux/kernel.h.\n\nThis patch adds the functions print_hex_dump() \u0026 hex_dumper().\nprint_hex_dump() can be used to perform a hex + ASCII dump of data to\nsyslog, in an easily viewable format, thus providing a common text hex dump\nformat.\n\nhex_dumper() provides a dump-to-memory function. It converts one \"line\" of\noutput (16 bytes of input) at a time.\n\nExample usages:\n\tprint_hex_dump(KERN_DEBUG, DUMP_PREFIX_ADDRESS, frame-\u003edata, frame-\u003elen);\n\thex_dumper(frame-\u003edata, frame-\u003elen, linebuf, sizeof(linebuf));\n\nExample output using %DUMP_PREFIX_OFFSET:\n0009ab42: 40414243 44454647 48494a4b 4c4d4e4f-@ABCDEFG HIJKLMNO\nExample output using %DUMP_PREFIX_ADDRESS:\nffffffff88089af0: 70717273 74757677 78797a7b 7c7d7e7f-pqrstuvw xyz{|}~.\n\n[akpm@linux-foundation.org: cleanups, add export]\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "6eaeeaba39e5fa3d52a0bb8de15e995516ae251a", "tree": "5b4052fabfe107ad5332cb758ad8d86ea5a87848", "parents": [ "02239c29967418284c05d58971894d658575e78c" ], "author": { "name": "Eric Dumazet", "email": "dada1@cosmosbay.com", "time": "Thu May 10 22:22:37 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:34 2007 -0700" }, "message": "getrusage(): fill ru_inblock and ru_oublock fields if possible\n\nIf CONFIG_TASK_IO_ACCOUNTING is defined, we update io accounting counters for\neach task.\n\nThis patch permits reporting of values using the well known getrusage()\nsyscall, filling ru_inblock and ru_oublock instead of null values.\n\nAs TASK_IO_ACCOUNTING currently counts bytes counts, we approximate blocks\ncount doing : nr_blocks \u003d nr_bytes / 512\n\nExample of use :\n----------------------\nAfter patch is applied, /usr/bin/time command can now give a good\napproximation of IO that the process had to do.\n\n$ /usr/bin/time grep tototo /usr/include/*\nCommand exited with non-zero status 1\n0.00user 0.02system 0:02.11elapsed 1%CPU (0avgtext+0avgdata 0maxresident)k\n24288inputs+0outputs (0major+259minor)pagefaults 0swaps\n\n$ /usr/bin/time dd if\u003d/dev/zero of\u003d/tmp/testfile count\u003d1000\n1000+0 enregistrements lus\n1000+0 enregistrements écrits\n512000 octets (512 kB) copiés, 0,00326601 seconde, 157 MB/s\n0.00user 0.00system 0:00.00elapsed 80%CPU (0avgtext+0avgdata 0maxresident)k\n0inputs+3000outputs (0major+299minor)pagefaults 0swaps\n\nSigned-off-by: Eric Dumazet \u003cdada1@cosmosbay.com\u003e\nCc: Oleg Nesterov \u003coleg@tv-sign.ru\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "c14b84949e127560084c7c56b365931c71c60768", "tree": "88bce4993779078856612b6a32f65f14ab379d85", "parents": [ "2ea5bc5e5bb51492f189bba44045e0de7decf4a0" ], "author": { "name": "Jeff Dike", "email": "jdike@addtoit.com", "time": "Thu May 10 22:22:34 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:34 2007 -0700" }, "message": "uml: iRQ stacks\n\nAdd a separate IRQ stack. This differs from i386 in having the entire\ninterrupt run on a separate stack rather than starting on the normal kernel\nstack and switching over once some preparation has been done. The underlying\nmechanism, is of course, sigaltstack.\n\nAnother difference is that interrupts that happen in userspace are handled on\nthe normal kernel stack. These cause a wait wakeup instead of a signal\ndelivery so there is no point in trying to switch stacks for these. There\u0027s\nno other stuff on the stack, so there is no extra stack consumption.\n\nThis quirk makes it possible to have the entire interrupt run on a separate\nstack - process preemption (and calls to schedule()) happens on a normal\nkernel stack. If we enable CONFIG_PREEMPT, this will need to be rethought.\n\nThe IRQ stack for CPU 0 is declared in the same way as the initial kernel\nstack. IRQ stacks for other CPUs will be allocated dynamically.\n\nAn extra field was added to the thread_info structure. When the active\nthread_info is copied to the IRQ stack, the real_thread field points back to\nthe original stack. This makes it easy to tell where to copy the thread_info\nstruct back to when the interrupt is finished. It also serves as a marker of\na nested interrupt. It is NULL for the first interrupt on the stack, and\nnon-NULL for any nested interrupts.\n\nCare is taken to behave correctly if a second interrupt comes in when the\nthread_info structure is being set up or taken down. I could just disable\ninterrupts here, but I don\u0027t feel like giving up any of the performance gained\nby not flipping signals on and off.\n\nIf an interrupt comes in during these critical periods, the handler can\u0027t run\nbecause it has no idea what shape the stack is in. So, it sets a bit for its\nsignal in a global mask and returns. The outer handler will deal with this\nsignal itself.\n\nAtomicity is had with xchg. A nested interrupt that needs to bail out will\nxchg its signal mask into pending_mask and repeat in case yet another\ninterrupt hit at the same time, until the mask stabilizes.\n\nThe outermost interrupt will set up the thread_info and xchg a zero into\npending_mask when it is done. At this point, nested interrupts will look at\n-\u003ereal_thread and see that no setup needs to be done. They can just continue\nnormally.\n\nSimilar care needs to be taken when exiting the outer handler. If another\ninterrupt comes in while it is copying the thread_info, it will drop a bit\ninto pending_mask. The outer handler will check this and if it is non-zero,\nwill loop, set up the stack again, and handle the interrupt.\n\nSigned-off-by: Jeff Dike \u003cjdike@linux.intel.com\u003e\nCc: Paolo \u0027Blaisorblade\u0027 Giarrusso \u003cblaisorblade@yahoo.it\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "23c9bbbac57ae50dceadfda37b49785ec04dd42f", "tree": "ad04af7dc8306767613dd1774bced3a75b0540c0", "parents": [ "0d4f64681695b0e389f7121eb647b27c602990bc" ], "author": { "name": "Hirokazu Takata", "email": "takata@linux-m32r.org", "time": "Thu May 10 22:22:28 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:33 2007 -0700" }, "message": "m32r: fix pte_to_pgoff(), pgoff_to_pte() and __swp_type() macros\n\nThis patch is required to handle file-mapped or swapped-out pages\ncorrectly.\n\n- Fix pte_to_pgoff() and pgoff_to_pte() macros not to include\n _PAGE_PROTNONE bit of PTE.\n Mask value for { ACCESSED, N, (R, W, X), L, G } is not 0xef but 0x7f.\n- Fix __swp_type() macro for MAX_SWAPFILES_SHIFT(\u003d5), which is defined\n in include/linux/swap.h.\n\n* M32R TLB format\n\n [0] [1:19] [20:23] [24:31]\n +-----------------------+----+-------------+\n | VPN |0000| ASID |\n +-----------------------+----+-------------+\n +-+---------------------+----+-+---+-+-+-+-+\n |0 PPN |0000|N|AC |L|G|V| |\n +-+---------------------+----+-+---+-+-+-+-+\n || RWX | |\n* software bits in PTE || | +-- _PAGE_FILE | _PAGE_DIRTY\n || +---- _PAGE_PRESENT\n |+---------------- _PAGE_ACCESSED\n +----------------- _PAGE_PROTNONE\n\nSigned-off-by: Hitoshi Yamamoto \u003chitoshiy@linux-m32r.org\u003e\nSigned-off-by: Hirokazu Takata \u003ctakata@linux-m32r.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "43c09ce7927912c7867617cba0a265beea38a154", "tree": "0b0a8b8e9a5f9b2e1fe7aa058378f23321f2a910", "parents": [ "44316634460a6b368ad3160da6cba3b4725a1433" ], "author": { "name": "Hirokazu Takata", "email": "takata.hirokazu@renesas.com", "time": "Thu May 10 22:22:25 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:33 2007 -0700" }, "message": "m32r: fix switch_to macro to push/pop frame pointer if needed\n\nThis patch fixes a rarely-happened but severe scheduling problem of\nthe recent m32r kernel of 2.6.17-rc3 or later.\n\nIn the following previous m32r patch, the switch_to macro was\nmodified not to do unnecessary push/pop operations for tuning.\n\u003e [PATCH] m32r: update switch_to macro for tuning\n\u003e 4127272c38619c56f0c1aa01d01c7bd757db70a1\n\nIn this modification, only \u0027lr\u0027 and \u0027sp\u0027 registers are push/pop\u0027ed,\nassuming that the m32r kernel is always compiled with\n-fomit-frame-pointer option.\n\nHowever, in 2.6 kernel, kernel/sched.c is irregularly compiled\nwith -fno-omit-frame-pointer if CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER\nis not defined.\n\n -- kernel/Makefile --\n :\n ifneq ($(CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER),y)\n # According to Alan Modra \u003calan@linuxcare.com.au\u003e, the -fno-omit-frame-pointer is\n # needed for x86 only. Why this used to be enabled for all architectures is beyond\n # me. I suspect most platforms don\u0027t need this, but until we know that for sure\n # I turn this off for IA-64 only. Andreas Schwab says it\u0027s also needed on m68k\n # to get a correct value for the wait-channel (WCHAN in ps). --davidm\n CFLAGS_sched.o :\u003d $(PROFILING) -fno-omit-frame-pointer\n endif\n :\n ---\n\nTherefore, for the recent m32r kernel, we have to push/pop \u0027fp\u0027\n(frame pointer) if CONFIG_FRAME_POINTER is defined or\nCONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER is not defined.\n\nSigned-off-by: Hitoshi Yamamoto \u003chitoshiy@linux-m32r.org\u003e\nSigned-off-by: Hirokazu Takata \u003ctakata@linux-m32r.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "44316634460a6b368ad3160da6cba3b4725a1433", "tree": "35ee3fe1c7f0d7015e1be70542cc9635d34b3cad", "parents": [ "0a9d6e7cb0d1e5acc61d481d7a1ea25c294c3dff" ], "author": { "name": "Yoshinori Sato", "email": "ysato@users.sourceforge.jp", "time": "Thu May 10 22:22:23 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:33 2007 -0700" }, "message": "h8300 syscall update\n\nh8300 systemcall entry table update.\n\nSigned-off-by: Yoshinori Sato \u003cysato@users.sourceforge.jp\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "9393e1dc8e394bd59217178b26b2476dc43e8667", "tree": "9b6274f4657b09a9d4bd76719b93022c844d4963", "parents": [ "32993b793fb07784fd1380004f5b34f31f9105d5" ], "author": { "name": "Andi Kleen", "email": "ak@suse.de", "time": "Thu May 10 22:22:18 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:32 2007 -0700" }, "message": "x86_64: new syscall\n\nAdd epoll_pwait()\n\n(akpm: stolen from Andi\u0027s queue, because I want to send the signalfd patches\nwhich also add syscalls. Not sure what the __IGNORE_getcpu is for).\n\nSigned-off-by: Andi Kleen \u003cak@suse.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "069f11f9d66bc582fb40a37a7b92363f5d321969", "tree": "70d07076d1026fedfeaa9a4cdf04ba1b3cf9aad6", "parents": [ "6041b57c6c99dcb59524f1bb0db0628c2689a464" ], "author": { "name": "Vivek Goyal", "email": "vgoyal@in.ibm.com", "time": "Thu May 10 22:22:15 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:32 2007 -0700" }, "message": "x86_64: display more intuitive error message if kernel is not 2MB aligned\n\no x86_64 kernel needs to be compiled for 2MB aligned addresses. Currently\n we are using BUILD_BUG_ON() to warn the user if he has not done so. But\n looks like folks are not finding message very intutive and don\u0027t open\n the respective c file to find problem source. (Bug 8439)\n\narch/x86_64/kernel/head64.c: In function \u0027x86_64_start_kernel\u0027:\narch/x86_64/kernel/head64.c:70: error: size of array \u0027type name\u0027 is negative\n\no Using preprocessor directive #error to print a better message if\n CONFIG_PHYSICAL_START is not aligned to 2MB boundary.\n\nSigned-off-by: Vivek Goyal \u003cvgoyal@in.ibm.com\u003e\nCc: Andi Kleen \u003cak@suse.de\u003e\nCc: \"Eric W. Biederman\" \u003cebiederm@xmission.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "6041b57c6c99dcb59524f1bb0db0628c2689a464", "tree": "0509eb54f13e94b08afab9fb6bd2947fca73492c", "parents": [ "129a84de2347002f09721cda3155ccfd19fade40" ], "author": { "name": "Joerg Roedel", "email": "joerg.roedel@amd.com", "time": "Thu May 10 22:22:14 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri May 11 08:29:32 2007 -0700" }, "message": "i386: work around miscompilation of alternatives code\n\nA recent change makes my Dell 1501 hang on boot. It\u0027s an AMD MK-36. I use\nan x86_64 kernel. It is 100% reproducible.\n\nI debugged this problem a bit and my compiler[1]interprets the \u003dA constraint\nas %rax instead of %edx:%eax on x86_64 which causes the problem. The appended\npatch provides a workaround for this and fixed the hang on my machine.\n\n[1] gcc version 4.1.3 20070429 (prerelease) (Debian 4.1.2-5)\n\nSigned-off-by: Joerg Roedel \u003cjoerg.roedel@amd.com\u003e\nCc: Andi Kleen \u003cak@suse.de\u003e\nCc: Benny Halevy \u003cbhalevy@panasas.com\u003e\nCc: Pete Zaitcev \u003czaitcev@redhat.com\u003e\nCc: \"Joerg Roedel\" \u003cjoerg.roedel@amd.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "c911d1e16dfc1f0338bbc245ff724322c0113395", "tree": "0f3e7842c674cacf910401be3bc8cb505d37db98", "parents": [ "81937d3bac582ea2249dc2c8891d3371635e8b64" ], "author": { "name": "Jaroslav Kysela", "email": "perex@suse.cz", "time": "Fri May 11 16:56:18 2007 +0200" }, "committer": { "name": "Jaroslav Kysela", "email": "perex@suse.cz", "time": "Fri May 11 16:56:18 2007 +0200" }, "message": "[ALSA] version 1.0.14rc4\n\nSigned-off-by: Jaroslav Kysela \u003cperex@suse.cz\u003e\n" }, { "commit": "1f53aee0e0b398bad0c6ec2cd5ca2bccd4fbd56b", "tree": "f5e940d4da139d2628f4e4b9494fe54366e44ed4", "parents": [ "1a236566ea320a05f3892d8dedd4b5c6bff8706b" ], "author": { "name": "Liam Girdwood", "email": "lg@opensource.wolfsonmicro.com", "time": "Mon Apr 16 19:17:44 2007 +0200" }, "committer": { "name": "Jaroslav Kysela", "email": "perex@suse.cz", "time": "Fri May 11 16:56:02 2007 +0200" }, "message": "[ALSA] SoC WM8753 codec support\n\nThis patch series adds support for the WM8753 codec as found on the\nOpenMoko Neo 1973 (other Neo 1973 and Samsung S3C24xx patches to follow\ntoday) as well other new devices.\nFeatures:-\n o HiFi and Voice DAI supported (inc runtime switching of DAI mode)\n o DAPM\n o All mixers\n o PLL calculator\n o 16,20 and 24bit samples.\n o WM8753 I2C ID added to include/linux/i2c-id.h\nFrom: Liam Girdwood \u003clg@opensource.wolfsonmicro.com\u003e\n\nSigned-off-by: Harald Welte \u003claforge@openmoko.org\u003e\nSigned-off-by: Graeme Gregory \u003cgg@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Seth Forshee \u003cseth.forshee@gmail.com\u003e\nSigned-off-by: Liam Girdwood \u003clg@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Takashi Iwai \u003ctiwai@suse.de\u003e\nSigned-off-by: Jaroslav Kysela \u003cperex@suse.cz\u003e\n" }, { "commit": "c4116ae717d6456884232642bae806125d39f1d3", "tree": "a60ed2867b07e8dcb8fe96a7c37e6c28d954b9c4", "parents": [ "208eee2a9db7e70109583e3481371967cd1d4764" ], "author": { "name": "Pavel Hofman", "email": "dustin@seznam.cz", "time": "Thu Apr 05 17:07:30 2007 +0200" }, "committer": { "name": "Jaroslav Kysela", "email": "perex@suse.cz", "time": "Fri May 11 16:55:57 2007 +0200" }, "message": "[ALSA] Fix misc bugs in i2c/others/ak4114.c\n\n* correct register for \u0027IEC958 Non-PCM Bitstream\u0027, \u0027IEC958 DTS Bitstream\u0027\n to use AK4114_REG_RCS0\n* correct check for control name: if (strstr(kctl-\u003eid.name, \u0027Playback\u0027))\n* correct check: if (!chip-\u003einit) in snd_ak4114_external_rate\n* added PCM control \u0027IEC958 PPL Lock Status\u0027\n\nSigned-off-by: Pavel Hofman \u003cdustin@seznam.cz\u003e\nSigned-off-by: Takashi Iwai \u003ctiwai@suse.de\u003e\nSigned-off-by: Jaroslav Kysela \u003cperex@suse.cz\u003e\n" }, { "commit": "6d5fc07aee79327eba5e50a3afa4c1f11b4291d6", "tree": "2bce790f94d63f2deaabc4b68a65806d932d3836", "parents": [ "023ff3eee6255390384e050d9daab1490c88edf8" ], "author": { "name": "Takashi Iwai", "email": "tiwai@suse.de", "time": "Tue Mar 27 15:54:27 2007 +0200" }, "committer": { "name": "Jaroslav Kysela", "email": "perex@suse.cz", "time": "Fri May 11 16:55:53 2007 +0200" }, "message": "[ALSA] ak4114 - Fix a typo in DIF2 bit definition\n\nFixed a typo in AK4114_DIF2 bit definition. This may fix some\nproblems for Audiophile 192 and Juli boards.\n\nSigned-off-by: Takashi Iwai \u003ctiwai@suse.de\u003e\nSigned-off-by: Jaroslav Kysela \u003cperex@suse.cz\u003e\n" }, { "commit": "8f7ba051d2abb3d3bde9b95e47246c60b704d2b4", "tree": "6b1fcd728b520ca24c99672c873ed17b43ac3b9f", "parents": [ "76e630677419ecf2cf8c0b738536eee34dc048e6" ], "author": { "name": "Takashi Iwai", "email": "tiwai@suse.de", "time": "Thu Feb 22 16:07:21 2007 +0100" }, "committer": { "name": "Jaroslav Kysela", "email": "perex@suse.cz", "time": "Fri May 11 16:55:43 2007 +0200" }, "message": "[ALSA] mpu401 - Add MPU401_INFO_UART_ONLY bitflag\n\nAdded MPU401_INFO_UART_ONLY bitflag to avoid issueing UART_ENTER command\nat opening streams. Some devices support only UART mode and give errors\nto UART_ENTER.\nA new module option, uart_enter, is added to snd-mpu401 driver.\nFor UART-only devices, set uart_enter\u003d0.\n\nSigned-off-by: Takashi Iwai \u003ctiwai@suse.de\u003e\nSigned-off-by: Jaroslav Kysela \u003cperex@suse.cz\u003e\n" }, { "commit": "ef991b95aa1351a5782cfaccb9aefba76ca8b990", "tree": "129762745099142652615dbe1c4c29725cca51c8", "parents": [ "5e24c1c1c496c4603395d6e9cc320f85008fc891" ], "author": { "name": "Takashi Iwai", "email": "tiwai@suse.de", "time": "Thu Feb 22 12:52:53 2007 +0100" }, "committer": { "name": "Jaroslav Kysela", "email": "perex@suse.cz", "time": "Fri May 11 16:55:42 2007 +0200" }, "message": "[ALSA] Add snd_pcm_group_for_each_entry() for code cleanup\n\nAdded a new macro snd_pcm_group_for_each_entry() just for code cleanup.\nOld macros, snd_pcm_group_for_each() and snd_pcm_group_substream_entry(),\nare removed.\n\nSigned-off-by: Takashi Iwai \u003ctiwai@suse.de\u003e\nSigned-off-by: Jaroslav Kysela \u003cperex@suse.cz\u003e\n" }, { "commit": "7b239bb1068eda3f7e8befd9b43671093c206f0e", "tree": "03e06ed57d690ca50f637d83a67b8ac846c6fd6d", "parents": [ "fcbee6410d5c4112593e7082fb8d96dfdc6c1c25" ], "author": { "name": "Atsushi Nemoto", "email": "anemo@mba.ocn.ne.jp", "time": "Thu May 10 23:47:45 2007 +0900" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Fri May 11 14:28:33 2007 +0100" }, "message": "[MIPS] Fix build error in atomic64_cmpxchg\n\nSigned-off-by: Atsushi Nemoto \u003canemo@mba.ocn.ne.jp\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "44320f2bcbc05c3f4d62fcdd06fe440d9a803ce0", "tree": "df01c27891240ec9d221366c74e3bcb265494706", "parents": [ "f009bbf10fe2321a536b4bd922fc8d070ebe27fd" ], "author": { "name": "Yoichi Yuasa", "email": "yoichi_yuasa@tripeaks.co.jp", "time": "Thu May 10 20:00:55 2007 +0900" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Fri May 11 14:28:32 2007 +0100" }, "message": "[MIPS] Add extern cobalt_board_id\n\nSigned-off-by: Yoichi Yuasa \u003cyoichi_yuasa@tripeaks.co.jp\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "a1b53a7b22934504d8c4e065759e8674e665506d", "tree": "b41c351515eaf21845a2c2485e15bdeeea5e37c7", "parents": [ "f543110da7a53acb8c6d367e740ca9e110f0bb3a" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Wed May 09 17:49:53 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Fri May 11 14:28:31 2007 +0100" }, "message": "[MIPS] SB1: Build fix.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "599ca0fb639ba843da46c3ad1a53590763539750", "tree": "f521a5ca50d70dda6a7fe42f5d5a9f1ef370c80b", "parents": [ "bef964e55ac128b1a6894c68171d0b22263449f8" ], "author": { "name": "Franck Bui-Huu", "email": "fbuihuu@gmail.com", "time": "Mon May 07 18:01:53 2007 +0200" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Fri May 11 14:28:31 2007 +0100" }, "message": "[MIPS] Remove LIMITED_DMA support\n\nThis code was needed only by Jaguar ATX.\n\nSigned-off-by: Franck Bui-Huu \u003cfbuihuu@gmail.com\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "bef964e55ac128b1a6894c68171d0b22263449f8", "tree": "f462bd850cbdc5273d6f0923350c694fc89e4abc", "parents": [ "1e54f778af4467b816bf1289e7c4bf7e50067b7b" ], "author": { "name": "Franck Bui-Huu", "email": "fbuihuu@gmail.com", "time": "Mon May 07 18:01:52 2007 +0200" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Fri May 11 14:28:31 2007 +0100" }, "message": "[MIPS] Remove Momenco Jaguar ATX support\n\nIt has some hackish code and it odd DMA results in the need to support\nold features in kernel code.\n\nSigned-off-by: Franck Bui-Huu \u003cfbuihuu@gmail.com\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "1e54f778af4467b816bf1289e7c4bf7e50067b7b", "tree": "c6b6daff71c7e26d59dc84a61fb05ff1fe3dac02", "parents": [ "0b6249567b4ecf6e9d5a8efcf149f3e7cf788cc0" ], "author": { "name": "Franck Bui-Huu", "email": "fbuihuu@gmail.com", "time": "Mon May 07 18:01:51 2007 +0200" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Fri May 11 14:28:31 2007 +0100" }, "message": "[MIPS] Remove Momenco Ocelot G support\n\nSigned-off-by: Franck Bui-Huu \u003cfbuihuu@gmail.com\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "0b6249567b4ecf6e9d5a8efcf149f3e7cf788cc0", "tree": "dfb8d45357a9e8e3ad134f7eec87e7918132410e", "parents": [ "d725cf3818b12a17d78b87a2de19e8eec17126ae" ], "author": { "name": "Chris Dearman", "email": "chris@mips.com", "time": "Tue May 08 16:09:13 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Fri May 11 14:28:31 2007 +0100" }, "message": "[MIPS] FPU hazard handling\n\nMove FPU hazard handling to hazards.h and provide proper support for\nMIPSR2 processors\n\nSigned-off-by: Chris Dearman \u003cchris@mips.com\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "d725cf3818b12a17d78b87a2de19e8eec17126ae", "tree": "9d200020488b886201771bd6516c63ef43397baa", "parents": [ "ef300e42234eac066b193c871714203d999b481c" ], "author": { "name": "Chris Dearman", "email": "chris@mips.com", "time": "Tue May 08 14:05:39 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Fri May 11 14:28:31 2007 +0100" }, "message": "[MIPS] MT: Reenable EIC support and add support for SOCit SC.\n\nSigned-off-by: Chris Dearman \u003cchris@mips.com\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "ef300e42234eac066b193c871714203d999b481c", "tree": "2dddd78a2a0a773ec4e8780343097db527decaff", "parents": [ "856a514b408fd1b147bf95916811980982fa40d0" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Sun May 06 18:31:18 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Fri May 11 14:28:30 2007 +0100" }, "message": "[MIPS] Define and use vi_handler_t for vectored interrupt handlers.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "87c1efbfeac49849b981a7eac8cba42d4a49b2e9", "tree": "856b18b90a89c30bd2fa2a1982a3d7c6a15364d7", "parents": [ "d89d87965dcbe6fe4f96a2a7e8421b3a75f634d1" ], "author": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Fri May 11 13:29:54 2007 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Fri May 11 13:29:54 2007 +0200" }, "message": "Fix compile/link of init/do_mounts.c with !CONFIG_BLOCK\n\nWe need a stub function for when CONFIG_BLOCK isn\u0027t set.\n\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "d89d87965dcbe6fe4f96a2a7e8421b3a75f634d1", "tree": "8e87952d6e016192220aa090a8121e357a951d8f", "parents": [ "129a84de2347002f09721cda3155ccfd19fade40" ], "author": { "name": "Neil Brown", "email": "neilb@suse.de", "time": "Tue May 01 09:53:42 2007 +0200" }, "committer": { "name": "Jens Axboe", "email": "axboe@nelson.home.kernel.dk", "time": "Fri May 11 13:28:37 2007 +0200" }, "message": "When stacked block devices are in-use (e.g. md or dm), the recursive calls\n\nto generic_make_request can use up a lot of space, and we would rather they\ndidn\u0027t.\n\nAs generic_make_request is a void function, and as it is generally not\nexpected that it will have any effect immediately, it is safe to delay any\ncall to generic_make_request until there is sufficient stack space\navailable.\n\nAs -\u003ebi_next is reserved for the driver to use, it can have no valid value\nwhen generic_make_request is called, and as __make_request implicitly\nassumes it will be NULL (ELEVATOR_BACK_MERGE fork of switch) we can be\ncertain that all callers set it to NULL. We can therefore safely use\nbi_next to link pending requests together, providing we clear it before\nmaking the real call.\n\nSo, we choose to allow each thread to only be active in one\ngeneric_make_request at a time. If a subsequent (recursive) call is made,\nthe bio is linked into a per-thread list, and is handled when the active\ncall completes.\n\nAs the list of pending bios is per-thread, there are no locking issues to\nworry about.\n\nI say above that it is \"safe to delay any call...\". There are, however,\nsome behaviours of a make_request_fn which would make it unsafe. These\ninclude any behaviour that assumes anything will have changed after a\nrecursive call to generic_make_request.\n\nThese could include:\n - waiting for that call to finish and call it\u0027s bi_end_io function.\n md use to sometimes do this (marking the superblock dirty before\n completing a write) but doesn\u0027t any more\n - inspecting the bio for fields that generic_make_request might\n change, such as bi_sector or bi_bdev. It is hard to see a good\n reason for this, and I don\u0027t think anyone actually does it.\n - inspecing the queue to see if, e.g. it is \u0027full\u0027 yet. Again, I\n think this is very unlikely to be useful, or to be done.\n\nSigned-off-by: Neil Brown \u003cneilb@suse.de\u003e\nCc: Jens Axboe \u003caxboe@kernel.dk\u003e\nCc: \u003cdm-devel@redhat.com\u003e\n\nAlasdair G Kergon \u003cagk@redhat.com\u003e said:\n\n I can see nothing wrong with this in principle.\n\n For device-mapper at the moment though it\u0027s essential that, while the bio\n mappings may now get delayed, they still get processed in exactly\n the same order as they were passed to generic_make_request().\n\n My main concern is whether the timing changes implicit in this patch\n will make the rare data-corrupting races in the existing snapshot code\n more likely. (I\u0027m working on a fix for these races, but the unfinished\n patch is already several hundred lines long.)\n\n It would be helpful if some people on this mailing list would test\n this patch in various scenarios and report back.\n\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" } ], "next": "0a4ff8c2598b72f2fa9d50aae9e1809e684dbf41" }