)]}' { "log": [ { "commit": "cfc0dadc446d76654b087d08faf4c1759e77ef5b", "tree": "c691e8276d6db103bfc99868987da704d59f42c8", "parents": [ "92261600c0d15322a678df32c2af5579b42deab0" ], "author": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Tue Feb 21 14:34:39 2012 -0800" }, "committer": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Mon Feb 27 23:01:29 2012 -0800" }, "message": "usb: diag_bridge: Add support for PID 0x904c\n\nProduct Id 0x904c includes DIAG, SER3(System monitor), SER4(EFS sync),\nDUN, CSVT, NET1, NET2, NET3, NET4 device interfaces.\n\nChange-Id: Ie412a6b2d5f6c526d31d640c0a6d4f90b1316a02\nSigned-off-by: Hemant Kumar \u003chemantk@codeaurora.org\u003e\n" }, { "commit": "92261600c0d15322a678df32c2af5579b42deab0", "tree": "6b6da9bd44b4e0f4b9a31ec95c43aeb3e97c6a70", "parents": [ "ef257147627e607d9de63f3184db75c5bc1bca92", "727416f477140afdf83a7f93d8eca7d6c1eafadd" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Feb 27 17:06:38 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Feb 27 17:06:38 2012 -0800" }, "message": "Merge \"msm-pcm-lpa: 8960: DSP timestamp support for LPA\" into msm-3.0" }, { "commit": "ef257147627e607d9de63f3184db75c5bc1bca92", "tree": "b92e985c52db7527951dcdb675ed750c1b80cf88", "parents": [ "561f110dd0ee49a9087f4e3a2a80f5df2755eb62", "0f90d47d0fb755c3dee173053f0b584234873cbb" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Feb 27 15:07:07 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Feb 27 15:07:07 2012 -0800" }, "message": "Merge changes I711b152b,I47eef0ea,Ib0bd865d,Ia94f8bec,I20ef197e,I06b4d080 into msm-3.0\n\n* changes:\n msm: qdsp5: Protect avsync mask access with spin lock to make it SMP safe\n qdsp5: adsp: Add NULL check in adsp driver functions\n msm: qdsp5: Avoid race condition of init info cmd being sent multiple times\n qdsp5: audio: Avoid Adsp ISR generation during audpp event processing\n qdsp5: audio: Set audio stopped flag before calling wakeup\n qdsp5: audio: Protect common data between ADSP ISR and flush operation\n" }, { "commit": "561f110dd0ee49a9087f4e3a2a80f5df2755eb62", "tree": "520154038a2b87d9510b087a926e63367e522ce5", "parents": [ "81e687c393281889469e39a9e5027987381c7e8e", "5c4c113728056624ffbbcc08bf43e4fd727ac3c3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Feb 27 15:07:07 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Feb 27 15:07:07 2012 -0800" }, "message": "Merge \"msm: kgsl: fix 8960 2d1 iommu name\" into msm-3.0" }, { "commit": "81e687c393281889469e39a9e5027987381c7e8e", "tree": "b7cf5ef36334c15a5520e00a9bd47772816dc0f5", "parents": [ "f314abc15949b7ee517cce7dd295eee5242b6e04" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Fri Feb 17 12:33:34 2012 -0800" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Mon Feb 27 12:35:23 2012 -0800" }, "message": "msm: jtag: add power collapse counters for each cpu\n\nCount the number of power collapse entries and exits for each cpu\nto aid with debugging issues related to power collapse.\n\nEntry count is incremented as part of jtag save and exit count as\npart of jtag restore. This save and restore code covers all kinds\nof power collapse (idle, suspend, hotplug) entry and exits for all\ncpus.\n\nChange-Id: Ieec58e35523fd5b07abe8a7504ee1e4804397983\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "5c4c113728056624ffbbcc08bf43e4fd727ac3c3", "tree": "d47b5c281a488ca89073c2e73863fb4c1402a39b", "parents": [ "f314abc15949b7ee517cce7dd295eee5242b6e04" ], "author": { "name": "Jeremy Gebben", "email": "jgebben@codeaurora.org", "time": "Mon Feb 27 11:26:49 2012 -0700" }, "committer": { "name": "Jeremy Gebben", "email": "jgebben@codeaurora.org", "time": "Mon Feb 27 11:28:12 2012 -0700" }, "message": "msm: kgsl: fix 8960 2d1 iommu name\n\nThe correct name is gfx2d1_2d1.\n\nChange-Id: I7e988c0ac88fb4006096b210f829e7ad80e73c12\nSigned-off-by: Jeremy Gebben \u003cjgebben@codeaurora.org\u003e\n" }, { "commit": "0f90d47d0fb755c3dee173053f0b584234873cbb", "tree": "2eb7662c999cf97ae53e0ddf6f6102fb2c70f427", "parents": [ "4903712367165e12c4623ec99f0b530efc9f047b" ], "author": { "name": "Manish Dewangan", "email": "manish@codeaurora.org", "time": "Sat Feb 25 14:09:23 2012 +0530" }, "committer": { "name": "Manish Dewangan", "email": "manish@codeaurora.org", "time": "Mon Feb 27 12:09:40 2012 +0530" }, "message": "msm: qdsp5: Protect avsync mask access with spin lock to make it SMP safe\n\navsync mask gets accessed in both process and Adsp ISR context. local\nirq is disabled while accessing this variable on process context,\nthis ensures that avsync doesn\u0027t get accessed concurrently in\nAdsp ISR context. But this holds true only for uniprocessor\nenvironment, On multi-processor Adsp ISR may come on other core\nwhich may result in inconsistent value of avsync mask.\n\nFix this by protecting avsync mask with spin lock.\n\nChange-Id: I711b152b512502484c2382be633b3887c9600334\nSigned-off-by: Manish Dewangan \u003cmanish@codeaurora.org\u003e\n" }, { "commit": "4903712367165e12c4623ec99f0b530efc9f047b", "tree": "19dd564effce6638ac02d41ca8288d12f1480c7d", "parents": [ "691f1c4a1d9b6e7710e52f4debfc7ae8257fad37" ], "author": { "name": "Manish Dewangan", "email": "manish@codeaurora.org", "time": "Fri Feb 10 18:25:25 2012 +0530" }, "committer": { "name": "Manish Dewangan", "email": "manish@codeaurora.org", "time": "Mon Feb 27 11:55:45 2012 +0530" }, "message": "qdsp5: adsp: Add NULL check in adsp driver functions\n\nADSP driver functions are directly accessing module without checking\nfor NULL. This can result in crash if module supplied points to NULL.\n\nAdded NULL check to solve this.\n\nChange-Id: I47eef0ea03086935ebfe33a2585ba214780e73f7\nSigned-off-by: Manish Dewangan \u003cmanish@codeaurora.org\u003e\n" }, { "commit": "691f1c4a1d9b6e7710e52f4debfc7ae8257fad37", "tree": "5e77244c2af760a1730863aa44f1bee549365051", "parents": [ "8e87bc17cb0d4a499be5e0698b692130d1a69b29" ], "author": { "name": "Manish Dewangan", "email": "manish@codeaurora.org", "time": "Fri Feb 10 12:50:14 2012 +0530" }, "committer": { "name": "Manish Dewangan", "email": "manish@codeaurora.org", "time": "Mon Feb 27 11:55:44 2012 +0530" }, "message": "msm: qdsp5: Avoid race condition of init info cmd being sent multiple times\n\nGET_INIT_INFO command is sent to modem adsp service to get the information\nsuch as task/queues supported by adsp. This command is sent whenever\nmsm_adsp_get() is called first time by any decoder/encoder drivers. This\ncommand needs to be sent only once, to achieve this a global flag\ninit_info_cmd_sent is set in msm_get_adsp() after sending GET_INIT_INFO\ncommand to adsp services. Currently flag init_info_cmd_sent is not\nprotected by any lock. Hence there is chance of GET_INIT_INFO command\nbeing sent multiple times if there are concurrent calls to msm_adsp_get()\nwhere each caller observes flag init_info_cmd_sent not to be set.\n\nFix this by protecting adsp info initialization sequence with mutex.\n\nChange-Id: Ib0bd865d44e4687f9a85b56854e1fd3277a5707d\nSigned-off-by: Manish Dewangan \u003cmanish@codeaurora.org\u003e\n" }, { "commit": "8e87bc17cb0d4a499be5e0698b692130d1a69b29", "tree": "16ac0d849504d43f90a5242657463748830220f1", "parents": [ "89a9f2341378cc6a53f010e177ed80942a8588d1" ], "author": { "name": "Manish Dewangan", "email": "manish@codeaurora.org", "time": "Thu Feb 09 20:25:15 2012 +0530" }, "committer": { "name": "Manish Dewangan", "email": "manish@codeaurora.org", "time": "Mon Feb 27 11:55:29 2012 +0530" }, "message": "qdsp5: audio: Avoid Adsp ISR generation during audpp event processing\n\nAudpp enable event is generated by adsp during audpp enable command\nfor the first playback session and from the second playback onwards\nit gets generated by audpp driver as fake event with local irq\ndisabled. During audpp event processing decoder enable command is\nsent to dsp and audio running flag is set. This finally leads to\nNEEDS_DATA event generation by dsp. On response to NEEDS_DATA event\ninput bistream is sent only if audio running flag is set otherwise\nthis event ignored.\n\nOn Uniprocessor disabling local interrupt ensures that audpp event\nhandler doesn\u0027t get preempted during audpp enable/disable event\nprocessing and audio-\u003erunning flag is set before NEEDS_DATA event\nfrom ADSP. But on Multi processor disabling local irq is not\nsufficient as adsp interrupt for NEEDS_DATA may come on other core\nbefore audio running flag has been set. This will result in NEEDS_DATA\nbeing ignored if audio running flag is not set and input bitstream\nwill not be sent to Adsp for decoding, which is undesired.\n\nTo solve this, local irq disable needs to be replaced with adsp cmd\nspin lock and audpp enable fake event needs to be generated with adsp\ncmd spin lock acquired. Acquiring adsp cmd spin lock will ensure that\nno other adsp event is triggered during fake event processing. As\nadsp cmd spin lock is only accessible in adsp driver, generating fake\nevent from audpp driver is not possible. Hence moved fake event\ngeneration logic to adsp driver.\n\nChange-Id: Ia94f8bec14ca2c6d655481609ad88f2194c44b14\nSigned-off-by: Manish Dewangan \u003cmanish@codeaurora.org\u003e\n" }, { "commit": "f314abc15949b7ee517cce7dd295eee5242b6e04", "tree": "9acbe6c858b87f334168badf3d210ab039269f28", "parents": [ "c90cf9407caad9d82f5b7d35373d359c4da80d83", "91223e07a7179cdabc8236230ebdda1adddf734a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 26 16:33:32 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Feb 26 16:33:32 2012 -0800" }, "message": "Merge \"USB: EHCI: msm: Add support for EHCI based Host Controller\" into msm-3.0" }, { "commit": "c90cf9407caad9d82f5b7d35373d359c4da80d83", "tree": "99e18a1bce6ab3c0c32cce8dcca7fdaf68ebe524", "parents": [ "0fa035d3679d2a19691b65746f76fd30c65438f9", "8c2ff8d99f25fa8013a9c0d453edae535fea86dc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 26 16:33:32 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Feb 26 16:33:32 2012 -0800" }, "message": "Merge \"mfd: wcd9310: remove GPIO reset configuration from CODEC driver\" into msm-3.0" }, { "commit": "0fa035d3679d2a19691b65746f76fd30c65438f9", "tree": "5d3a0f9c7c1c435de3c7ad856d1c9a7c9f6b8e64", "parents": [ "bd0ba0c627c3c0575be3ed14a8b8a360d85c4cb7", "14b56ad8f78a974de534aa02523624304983acfc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 26 16:33:32 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Feb 26 16:33:32 2012 -0800" }, "message": "Merge \"msm_fb: hdmi: check for multiple hpd on/off calls\" into msm-3.0" }, { "commit": "bd0ba0c627c3c0575be3ed14a8b8a360d85c4cb7", "tree": "b0f7aa41775d4ae31ad8b641cee94c2772b66a28", "parents": [ "e4d0239834b416e61f660c6aab4a55b93d21fecb", "32ab9469ca65780d812bebc1fd7b30a5040ec6f6" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 26 12:06:00 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Feb 26 12:06:00 2012 -0800" }, "message": "Merge \"msm: 8930: usb: Allow msm_bus vote when cable is connected\" into msm-3.0" }, { "commit": "e4d0239834b416e61f660c6aab4a55b93d21fecb", "tree": "d1d10404c18bcbba7ea63796fec50d846bda1566", "parents": [ "a424739f465fd24764ffcd4ec8488788ad2e625b", "6cc11c405ae51f50436f48160faf302b8b29d486" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 26 12:06:00 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Feb 26 12:06:00 2012 -0800" }, "message": "Merge \"video:msm: Move histogram reads to workqueue\" into msm-3.0" }, { "commit": "8c2ff8d99f25fa8013a9c0d453edae535fea86dc", "tree": "57cf9b559b9f518aa4a23b48e095fff210586036", "parents": [ "a424739f465fd24764ffcd4ec8488788ad2e625b" ], "author": { "name": "Shiv Maliyappanahalli", "email": "smaliyap@codeaurora.org", "time": "Mon Feb 06 16:18:44 2012 -0800" }, "committer": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Sun Feb 26 11:06:17 2012 -0800" }, "message": "mfd: wcd9310: remove GPIO reset configuration from CODEC driver\n\nRemove TABLA reset GPIO configuration from CODEC Driver since it is\nnow added to the board-8960-pmic table \u0026 board-8064-pmic table.\n\nChange-Id: I1d2839baa9270c6343b5ad8ffb6013be1e53cfc3\nSigned-off-by: Shiv Maliyappanahalli \u003csmaliyap@codeaurora.org\u003e\n" }, { "commit": "91223e07a7179cdabc8236230ebdda1adddf734a", "tree": "3e3642382ebc58ea116c1ce0e0c0d3837433615a", "parents": [ "a424739f465fd24764ffcd4ec8488788ad2e625b" ], "author": { "name": "Manu Gautam", "email": "mgautam@codeaurora.org", "time": "Tue Nov 08 15:27:22 2011 +0530" }, "committer": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Sun Feb 26 09:11:19 2012 -0800" }, "message": "USB: EHCI: msm: Add support for EHCI based Host Controller\n\nThis patch adds support for EHCI compliant USB Host Controller\nfor Liquid on 8064.\nThis driver supports Host only mode and is different from ehci-msm\nwhich relies on OTG driver for putting hardware in low pwer mode\nand PHY initialization as well.\n\nChange-Id: I84b63b2577311900a0b434f53df547bad62f6316\nSigned-off-by: Manu Gautam \u003cmgautam@codeaurora.org\u003e\nSigned-off-by: Hemant Kumar \u003chemantk@codeaurora.org\u003e\n" }, { "commit": "14b56ad8f78a974de534aa02523624304983acfc", "tree": "f518bde97afcdea60f86979cd3ed6ac70de145a8", "parents": [ "a424739f465fd24764ffcd4ec8488788ad2e625b" ], "author": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Wed Feb 22 14:56:21 2012 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 26 08:09:58 2012 -0700" }, "message": "msm_fb: hdmi: check for multiple hpd on/off calls\n\nHPD on/off may be called from userspace and from\nkernel asynchronously which may result in system\ncrash or reset. Returning in case HPD is already on/off.\n\nChange-Id: Ic6233925e02e6070e3ebc3fa40a87717e7b2ad1e\nSigned-off-by: Ajay Singh Parmar \u003caparmar@codeaurora.org\u003e\n" }, { "commit": "6cc11c405ae51f50436f48160faf302b8b29d486", "tree": "c28a5e404e705b8ea8ccf57463a0c78a8e2a3af1", "parents": [ "243aa93c4195162c114477965d52e159cc463d0a" ], "author": { "name": "Carl Vanderlip", "email": "carlv@codeaurora.org", "time": "Tue Feb 07 15:25:46 2012 -0800" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 26 05:36:05 2012 -0700" }, "message": "video:msm: Move histogram reads to workqueue\n\nHistogram must be read after each histogram completion in order to clear\nthe histogram registers; this patch reorganizes the histogram code to use\na deferred workqueue task to read the histogram registers out of the\ninterrupt context.\n\nAs well, this re-organizes the histogram start-up to clear, using the same\nnew workqueue, the first histogram that is read because it is often\nincorrect (too many or too few bins filled).\n\nCRs-Fixed: 328214\nChange-Id: I4088028fc805113e74b5b763c6458183e75421cf\nSigned-off-by: Carl Vanderlip \u003ccarlv@codeaurora.org\u003e\n" }, { "commit": "a424739f465fd24764ffcd4ec8488788ad2e625b", "tree": "a82be1a3bd45f401a016e91f748efa1d4fe1c627", "parents": [ "ac7952d778e6333e7296d00338b99371d7e01dc5", "bad3206b2051e880da7ebf2a35f240c09e37de3a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 26 04:31:41 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Feb 26 04:31:41 2012 -0800" }, "message": "Merge changes Ibad3206b,If1742378 into msm-3.0\n\n* changes:\n of/address: add empty static inlines for !CONFIG_OF\n dt: add empty for_each_child_of_node, of_find_property\n" }, { "commit": "ac7952d778e6333e7296d00338b99371d7e01dc5", "tree": "81e61532679125cdaa3e5446627b80541fd29ffb", "parents": [ "dd541fd61c1676866926453c0321864936a08b54", "3c9bd8f4cf7924444b4f2152a2c00e262563f9cc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 26 04:31:41 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Feb 26 04:31:41 2012 -0800" }, "message": "Merge \"hwmon: msm_adc: Fix section mismatches\" into msm-3.0" }, { "commit": "dd541fd61c1676866926453c0321864936a08b54", "tree": "062cb13da2a01a0442ccd2f68327aea760c1dfa0", "parents": [ "11fd99070ab5f9d76eca645eb965baa7fd29634c", "2d0f643c2d49c0183ef059164d4abdf7d37de7d1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 26 04:31:41 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Feb 26 04:31:41 2012 -0800" }, "message": "Merge \"msm: clock-9615: Update the sdc frequency table and FMAX values.\" into msm-3.0" }, { "commit": "11fd99070ab5f9d76eca645eb965baa7fd29634c", "tree": "5ef3d6ddbd31d46f621c524cfc15074fc49296b3", "parents": [ "1d273df87c2f65f827786df3401b5669e484ae90", "07847648b492d5ab19d0152410a00e42c9ce55ea" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 26 04:31:41 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Feb 26 04:31:41 2012 -0800" }, "message": "Merge \"msm: board: Guard HDMI regulator_get for errors.\" into msm-3.0" }, { "commit": "1d273df87c2f65f827786df3401b5669e484ae90", "tree": "2415888c59e94d8bf35b98590afcf8221bb2de8b", "parents": [ "948da1676add355e3b95b784525a30f4b5435a0f", "8e352a48a26b9446d4236f4115b2ee3fac62f1af" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 26 04:31:41 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Feb 26 04:31:41 2012 -0800" }, "message": "Merge \"msm: socinfo: Fix cpu_is_msm7x27 on ARCH_MSM7X27A\" into msm-3.0" }, { "commit": "948da1676add355e3b95b784525a30f4b5435a0f", "tree": "20a6eba1124e2f675c32249ef3765dbdf3fae4a5", "parents": [ "5e6c80aba85773784f63eb3bc43c98ef9ef573ef", "9a42993772086292114a224085fdf0d8b161ac0a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 26 04:31:41 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Feb 26 04:31:41 2012 -0800" }, "message": "Merge \"msm: pmu: Change resource struct to array of resources\" into msm-3.0" }, { "commit": "5e6c80aba85773784f63eb3bc43c98ef9ef573ef", "tree": "bce906432b9195af15044ef148b73a93da84a47f", "parents": [ "0f5c8fab7704e6477f3b21b61c05739a77c3e740", "445eb9a87232e1803ff09266ae60ad0d99628d2b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 26 04:31:41 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Feb 26 04:31:41 2012 -0800" }, "message": "Merge \"msm: rtb: Log the context id in the rtb\" into msm-3.0" }, { "commit": "0f5c8fab7704e6477f3b21b61c05739a77c3e740", "tree": "d34791f05f66f73cb2b0e414e625dd5ddb2e9d73", "parents": [ "b8f29db3a9adfa461bb3098df2eb5a4afa2564d0", "2892b6bf1e55298f13f49db28c9383c2edb6532e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 26 04:31:41 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Feb 26 04:31:41 2012 -0800" }, "message": "Merge \"qseecom: Add qseecom Driver\" into msm-3.0" }, { "commit": "b8f29db3a9adfa461bb3098df2eb5a4afa2564d0", "tree": "060cdb010dcc4c34c448de70bc5aeb4a102809ca", "parents": [ "243aa93c4195162c114477965d52e159cc463d0a", "fe9c3ecc239bd4bd857c5ad7e281dba83558320a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 26 04:31:41 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Feb 26 04:31:41 2012 -0800" }, "message": "Merge \"msm: board-7627a: Add Support to Auto Focus on OV5647 sensor\" into msm-3.0" }, { "commit": "727416f477140afdf83a7f93d8eca7d6c1eafadd", "tree": "d5ed0d55da833e56bc04cbe253b19238ed101f21", "parents": [ "243aa93c4195162c114477965d52e159cc463d0a" ], "author": { "name": "Tejas Shikhare", "email": "tshikhar@codeaurora.org", "time": "Tue Feb 14 17:46:31 2012 -0800" }, "committer": { "name": "Jay Wang", "email": "jaywang@codeaurora.org", "time": "Sat Feb 25 23:26:27 2012 -0800" }, "message": "msm-pcm-lpa: 8960: DSP timestamp support for LPA\n\nChange-Id: I9d16fdba84e39153da1c44dd71fb044569811958\nSigned-off-by: Tejas Shikhare \u003ctshikhar@codeaurora.org\u003e\n" }, { "commit": "243aa93c4195162c114477965d52e159cc463d0a", "tree": "5e8a921844408106723617291b502ff097a93b0e", "parents": [ "3cda841e09972e3a1d238cb59605e5494ffb01b3", "7e0beff7f863a9d493061aefb7125ef5f7b2098e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 20:51:55 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 20:51:56 2012 -0800" }, "message": "Merge \"msm: board: Add TABLA codec GPIO configuration\" into msm-3.0" }, { "commit": "3cda841e09972e3a1d238cb59605e5494ffb01b3", "tree": "e1cc73f6c7c2321c829e3f80558c9b873fae0bb5", "parents": [ "d705a488833621ef6883f40e090ada028b52b5c6", "27fa2829cce97dbd2941e20f3cc932aca7994ff3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 20:51:55 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 20:51:56 2012 -0800" }, "message": "Merge changes I7555a427,I08946af4,I60ceaaec into msm-3.0\n\n* changes:\n msm: footswitch: Improve printed error messages\n msm: clock-8960: Correct 8064 clock table rows for MDP and VPE footswitches\n msm: devices: Separate and correct 8064 footswitch device list\n" }, { "commit": "d705a488833621ef6883f40e090ada028b52b5c6", "tree": "ac831b61df0cdb098cc66d9e4fe144148dac7e1d", "parents": [ "0e31cd882aa37685dff632540f4c948966b89d45", "c0f21b6bc1fcb73900ea845e05a42a2de6fd8dde" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 20:51:55 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 20:51:56 2012 -0800" }, "message": "Merge \"msm: kgsl: Dereference pagetable pointer after checking it\u0027s not NULL\" into msm-3.0" }, { "commit": "0e31cd882aa37685dff632540f4c948966b89d45", "tree": "db14f0f4a4f4fd0e211ed9046ba6b59b4920d12f", "parents": [ "978259f7d503f8e79a2d4984217545a447592ab8", "eec88ca3d08d31f80f5f88345df8a3acb9a7e739" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 20:51:55 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 20:51:56 2012 -0800" }, "message": "Merge \"msm: board-8960: Add platform data for touch driver on Liquid 3D SKU\" into msm-3.0" }, { "commit": "978259f7d503f8e79a2d4984217545a447592ab8", "tree": "b92d5a44d57ce8bdf2480a00c6e86ea5c832cb7b", "parents": [ "a57e7bce042f3c3ab21297d769ef3ec086944002", "464a1791e65df2eb72225f503c4b2de0a2611463" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 18:53:39 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 18:53:39 2012 -0800" }, "message": "Merge \"board-msm7627a-storage: Fix wrong regulator assignment for SDC2, SDC4 slots\" into msm-3.0" }, { "commit": "a57e7bce042f3c3ab21297d769ef3ec086944002", "tree": "a8279f8f9bc9a743c9d1c0f605fe6513f34925b8", "parents": [ "2dd2c0f8a15e2983931044cf61ab821bc977b175", "aafeeb0f982bbecfb736826e840d2fb0db0abe51" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 18:53:39 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 18:53:39 2012 -0800" }, "message": "Merge \"msm: 8064: Increase SDC3 maximum current requirement to 800mA\" into msm-3.0" }, { "commit": "2dd2c0f8a15e2983931044cf61ab821bc977b175", "tree": "c91abea656caffed9a2ff4b60575ab12c5e3188a", "parents": [ "8528fbfcedf37eed60f12a909d5b83dbf9459b39", "e7920738d703304aab33fdbc60b4794d97779c64" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 18:53:39 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 18:53:39 2012 -0800" }, "message": "Merge \"msm: clock-rpm: Remove rpm_branch_clk_get_rate()\" into msm-3.0" }, { "commit": "8528fbfcedf37eed60f12a909d5b83dbf9459b39", "tree": "a2865196e0865db257db446a5aa47b0422e21908", "parents": [ "4c4a631ca197992d673a6fc45d2041c496f264f0", "20bd54d7d64317f2c9e3b1384133a1c550454948" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 18:53:39 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 18:53:39 2012 -0800" }, "message": "Merge \"msm_fb: HDMI: Create hdmi_as_primary switch node\" into msm-3.0" }, { "commit": "4c4a631ca197992d673a6fc45d2041c496f264f0", "tree": "f42ea9c820a6fb3c5594c0102b21c37d617223e7", "parents": [ "2f4846abae75576a5f7f662f3beb1cb1b2a1e671", "b3ed5d5890634bc7029feb40d1db29040005ccdf" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "message": "Merge \"build: Fix Device Tree file path\" into msm-3.0" }, { "commit": "2f4846abae75576a5f7f662f3beb1cb1b2a1e671", "tree": "e9b6ccf2bc76bcb82043b443b68dd7ff51c0bd60", "parents": [ "94b5f68981559d2d25ba24b35bb48cb00eab4e53", "f30d6047e69bef0d611907470f162afd2c4bc4f3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "message": "Merge \"msm: audio: qdsp5: Add PCM-WB support for VoIP.\" into msm-3.0" }, { "commit": "94b5f68981559d2d25ba24b35bb48cb00eab4e53", "tree": "98d814296edb08f2ec3a683fe8f6e4cd4b3c339e", "parents": [ "bec5d82bdc0af80a9467205b59ab7fc8ad9e2a3f", "cad865a0c5b191d984ef681d240f96694cc237f9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "message": "Merge \"power: pm8921-bms: adjust battery tolerances based on charging state\" into msm-3.0" }, { "commit": "bec5d82bdc0af80a9467205b59ab7fc8ad9e2a3f", "tree": "9eedc076b16421f7b0801f5ce2c8976677c758cc", "parents": [ "6ba216846ba1c9a33c31648af48ac8b004ba7373", "e78dfb677f8032cf6a8112e0459497166aed073b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "message": "Merge \"msm: pm-8x60: Save and restore the GIC_CPU_CTRL during power collapse\" into msm-3.0" }, { "commit": "6ba216846ba1c9a33c31648af48ac8b004ba7373", "tree": "25c6980dc5954b1fbdc9927101cc8e2f053b1fd7", "parents": [ "9389f42d89d5b44c38fc9a550fe87ff15d9ce3e7", "b69202b62234d2a3103117536ed637bde87dcc2b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "message": "Merge \"radio: iris: Fix the set station issue at boundary\" into msm-3.0" }, { "commit": "9389f42d89d5b44c38fc9a550fe87ff15d9ce3e7", "tree": "a1338629e6f5a382290653dda50bb9083159ad20", "parents": [ "f1bd8d1c4a399b024a216aa6d83e5fdf381641da", "69a22e42d26306926e3d56b28b4312ed0fe93f78" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "message": "Merge \"msm: socinfo: Fix section mismatch\" into msm-3.0" }, { "commit": "f1bd8d1c4a399b024a216aa6d83e5fdf381641da", "tree": "9b93a6882b4b90203a81db5d152372b5d7bfdb91", "parents": [ "3eb1debeb09121af9248a2f8117937cbb2225204", "fe02b0c0c16eaa3f3c7c71aac7a77b8e78951f76" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "message": "Merge \"diag: Release mutex in corner case\" into msm-3.0" }, { "commit": "3eb1debeb09121af9248a2f8117937cbb2225204", "tree": "c75e88472dd561b7af223a869481b79559f659b0", "parents": [ "1ee4dbf623d54d4c4e0ef29c6c94e3c5891720a4", "6dd4b3589dc35b7c08aeb250f31e18c52defda83" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "message": "Merge \"Revert \"msm: scm-pas: Stub out bus scaling on 8064\"\" into msm-3.0" }, { "commit": "1ee4dbf623d54d4c4e0ef29c6c94e3c5891720a4", "tree": "8ad6bfd362d35c771738295c26380dc3fe71a4ed", "parents": [ "7f244319cd187808314f63e0f56c7f0aa1e8e19a", "04592007f7fd2dcff87ed034b8767dcc9550f08b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "message": "Merge \"msm-camera: vertical and horizontal view angle of lens added.\" into msm-3.0" }, { "commit": "7f244319cd187808314f63e0f56c7f0aa1e8e19a", "tree": "35954ee7260b06ef4f8a5302a4dcf3664da967ab", "parents": [ "16249676c60437acd099a48b6af66c877b56c859", "c70819f5eb786a035b6807b367e2c5184629da31" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "message": "Merge \"ASoC: msm: Provide the audio sample rate for MI2S port to AFE\" into msm-3.0" }, { "commit": "16249676c60437acd099a48b6af66c877b56c859", "tree": "a6879598d82e18aa640544f79b54b428d8bb46d4", "parents": [ "e7340a01d5e0c64b1a5c207ac08e10ebcf17f5ac", "4a7abdb2aec44801cbd89c2d0ab62dc575bc2d59" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "message": "Merge \"ASoc: msm: Correct the slave port range check\" into msm-3.0" }, { "commit": "e7340a01d5e0c64b1a5c207ac08e10ebcf17f5ac", "tree": "879150778123fabb978c70fad9d1ee53f288f01f", "parents": [ "1b51974f6284612f1214e2870fe24fda656d89e5", "a99fcc24e94481134ca22f9778e88ed31646d6e3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "message": "Merge \"Revert \"msm: rng: Disable RNG init on APQ8064\"\" into msm-3.0" }, { "commit": "1b51974f6284612f1214e2870fe24fda656d89e5", "tree": "75937e27ce8dc7853166fec60fe8088768acdf17", "parents": [ "2ffecc44909678708df7a37c520a7a45c36ae4cd", "442ec046ab8d139ab986e1ce01cbc6dfe52050b5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "message": "Merge \"mfd: pm8xxx-irq: fix rogue interrupt warnings\" into msm-3.0" }, { "commit": "2ffecc44909678708df7a37c520a7a45c36ae4cd", "tree": "cf2ce28178b040cab62633f575b951a8eddb8f54", "parents": [ "2df94ab65183833197f717c3886cb24af0153b16", "fb587021e93b049c9419ea08f50fe431fa505548" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "message": "Merge \"perf: periodic: add cpumask processing\" into msm-3.0" }, { "commit": "2df94ab65183833197f717c3886cb24af0153b16", "tree": "bdc1877d8066357a1283ba430844b365a7861d6d", "parents": [ "85ec0cd679c0850b7bac60bc39251621aa45bb79", "9a27d4c55b862eecc1c5eacb7fc0185957b851a0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "message": "Merge \"gpu: ion: Add missing argument to iommu map func\" into msm-3.0" }, { "commit": "85ec0cd679c0850b7bac60bc39251621aa45bb79", "tree": "1678358d19ed2c7af490a67d3f960dbb03e08f03", "parents": [ "a2ecfcf49589e990c21f442e1f49ae99b6594b34", "fd193ebd578a4d61f4069180aa2ce54cef3b2b97" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "message": "Merge changes Id6e6f016,I28bcd205 into msm-3.0\n\n* changes:\n usb: ehci-msm-hsic: Fix unbalanced clock warning\n usb: ehci: Fix HSIC controller autosuspend\n" }, { "commit": "a2ecfcf49589e990c21f442e1f49ae99b6594b34", "tree": "57b1ee3c3703a193432ed6ba17d82441ee8777b8", "parents": [ "3b8582b49c3ca6c4255827507f6bb912c1e29f22", "ff10d072f13a0845fc4e6dc0f82d2f51d9209e6e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "message": "Merge \"video: msm: Allow Enabling of DMA P Hist LUT\" into msm-3.0" }, { "commit": "3b8582b49c3ca6c4255827507f6bb912c1e29f22", "tree": "0654a1b5bf715012db5d5fe92eb7533c6829832e", "parents": [ "92aa95af8d62b6d1e7b9cf4c161a1e17dcafe532", "563cf0fd474706bcc81c77865509758424dcd342" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "message": "Merge changes Ic0dedbad,Ic0dedbad into msm-3.0\n\n* changes:\n msm: kgsl: A3XX: Use recommended VBIF setings for dual port access\n msm: kgsl: Program both IOMMUs at our disposal on 8064\n" }, { "commit": "92aa95af8d62b6d1e7b9cf4c161a1e17dcafe532", "tree": "ddb534ec7dafefd20ab08f30c0b29cbb9f8e9cf2", "parents": [ "ca228bb5e9452032d73b6da871d43f9bebe07bb8", "2764fe7b96f40e3a2a383995d5478f7b5592ea48" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "message": "Merge \"msm: acpuclock-7201: Correct axi frequency in acpuclock table\" into msm-3.0" }, { "commit": "ca228bb5e9452032d73b6da871d43f9bebe07bb8", "tree": "f42c05cd63266352c7592f214cd5843a07b6f9db", "parents": [ "d206f97d7faed07caf17d17fc153f1aeec87347d", "552e4299485bde5ef5c539348d2962c1d2addd5a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "message": "Merge \"msm: io: Fix section mismatch warnings\" into msm-3.0" }, { "commit": "d206f97d7faed07caf17d17fc153f1aeec87347d", "tree": "c1350e950209a9e7aaf082e54763108352ff603a", "parents": [ "cce42f625ad498934db3d4a6ee2fa00f16fe056d", "4d94a44b356234b275e2f5f7d136d4e2192b5ec8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "message": "Merge changes Ib1f49cea,I4c14d8e6 into msm-3.0\n\n* changes:\n thermal: msm8960_tsens: Fix string length\n hwmon: pm8xxx-adc: Fix error handling conditions\n" }, { "commit": "cce42f625ad498934db3d4a6ee2fa00f16fe056d", "tree": "6674c8531d250dba14fc1c2d3f6ec06dc0a1b8d7", "parents": [ "8e3e62e47228176ed1159917561cabd176a4adb5", "de074a7d5ba87d1bd7ed2fe445da9a0f33cb9a30" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "message": "Merge \"gpu: ion: Change from uncached to buffered mapping\" into msm-3.0" }, { "commit": "8e3e62e47228176ed1159917561cabd176a4adb5", "tree": "d6477c4eb727523093eff567292b25dc25e2309a", "parents": [ "e0d3e41b8af95e4a301ca950733798ec5f02236e", "3dd7375fa4dd5910dbf50711cd27932b5c6abf48" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "message": "Merge \"msm: kgsl: Increase the wrap around constant while comparing timestamps\" into msm-3.0" }, { "commit": "e0d3e41b8af95e4a301ca950733798ec5f02236e", "tree": "d635f6f0ad558f1aa91d405a8172492fa8a26899", "parents": [ "addcbb77b1a46a3bfa6b234974dfd8bbcef12e33", "330e4d532d49161e4270273f1998b659a21eb813" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "message": "Merge \"msm: camera: Use csi_vdd only in csid driver\" into msm-3.0" }, { "commit": "addcbb77b1a46a3bfa6b234974dfd8bbcef12e33", "tree": "303942958b063072c9b204406338bf2ecd1d70e3", "parents": [ "fba56f4942ea18cb7c8c013b192243d063204547", "518e775e8ee23354e41b7369637e9f0079119784" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "message": "Merge changes Ia2077d08,I286a677f into msm-3.0\n\n* changes:\n msm: pil-gss: Remove PLL5 programming\n msm: pil-gss: Enable CXO in secure shutdown to ensure PLL5 locks\n" }, { "commit": "fba56f4942ea18cb7c8c013b192243d063204547", "tree": "d7e13dd365a3bc546346c1fd291b7f0578c90d20", "parents": [ "ecd91490ecd5cb7dc3cd7537a1936a4495a81906", "e063a05cb7b869853ac7968c29acc0891b0d70f9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "message": "Merge \"msm_fb: display: change perf level for 720p landscape video\" into msm-3.0" }, { "commit": "ecd91490ecd5cb7dc3cd7537a1936a4495a81906", "tree": "51644c001d4b6914c0c3a790121d1e0cf9f90c39", "parents": [ "1d632b8e348ee5a3ea339f04258415c7d1441c0c", "00f29e5fe0c984cc9996b24cd500e26f301cf6bc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "message": "Merge \"mfd: pm8921-core: Add support for additional PMIC PM8917 regulators\" into msm-3.0" }, { "commit": "1d632b8e348ee5a3ea339f04258415c7d1441c0c", "tree": "3667466e281cb6b85c779573bb7ec6f6df09fae8", "parents": [ "5e0f482227d88c6e689e8dfbd3d9741c2f9e582d", "c802017219171609538a6ed5d0b789480e5881df" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 12:46:51 2012 -0800" }, "message": "Merge \"msm: Add QPNP support routines\" into msm-3.0" }, { "commit": "89a9f2341378cc6a53f010e177ed80942a8588d1", "tree": "4d9a08bfd1ae03a90dc0693190dbc2558f92d5cc", "parents": [ "a4f1df0559eb2caa0b94c9888dfc49fa36188c39" ], "author": { "name": "Manish Dewangan", "email": "manish@codeaurora.org", "time": "Thu Feb 09 17:14:40 2012 +0530" }, "committer": { "name": "Manish Dewangan", "email": "manish@codeaurora.org", "time": "Sat Feb 25 20:41:43 2012 +0530" }, "message": "qdsp5: audio: Set audio stopped flag before calling wakeup\n\nDuring audio flush and stop command processing, wakeup on read\nand write wait queue is done first and then audio stopped flag\nis set to true. If a process waiting on read and write queue gets\nscheduled first before stopped flag is set then this may result in\nread or write command being sent to DSP after adsp disable operation,\nwhich is unexpected.\n\nFix this by setting stopped flag before calling wakeup.\n\nChange-Id: I20ef197e572d0ffc015d6004296ea7b9f5db2806\nSigned-off-by: Manish Dewangan \u003cmanish@codeaurora.org\u003e\n" }, { "commit": "a4f1df0559eb2caa0b94c9888dfc49fa36188c39", "tree": "8da2d66cd14c0cb3057074db4cbd503ac0f5a990", "parents": [ "5e0f482227d88c6e689e8dfbd3d9741c2f9e582d" ], "author": { "name": "Manish Dewangan", "email": "manish@codeaurora.org", "time": "Wed Feb 08 17:06:54 2012 +0530" }, "committer": { "name": "Manish Dewangan", "email": "manish@codeaurora.org", "time": "Sat Feb 25 20:41:17 2012 +0530" }, "message": "qdsp5: audio: Protect common data between ADSP ISR and flush operation\n\nDuring NEEDS_DATA or BUFFER_UPDATE event processing in ISR\ncontext, if flush command is issued by application then\nthere is chance of concurrent access of some of the variables\nshared between ISR and Process context. This may result in race\ncondition causing values of these shared variables to be\ninconsistent.\n\nFix this by protecting these variables using spin lock. Also corrected\nlocking sequence order in encode drivers.\n\nChange-Id: I06b4d08053ad13d1b118ab6f29e69e95b49d133f\nSigned-off-by: Manish Dewangan \u003cmanish@codeaurora.org\u003e\n" }, { "commit": "464a1791e65df2eb72225f503c4b2de0a2611463", "tree": "57570ea994c22220e688d8a50620ef8eb26ec5a4", "parents": [ "5e0f482227d88c6e689e8dfbd3d9741c2f9e582d" ], "author": { "name": "Sujit Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Fri Feb 17 15:54:13 2012 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 01:06:58 2012 -0700" }, "message": "board-msm7627a-storage: Fix wrong regulator assignment for SDC2, SDC4 slots\n\nSDC2 and SDC4 slots are powered through always on S3 regulator,\nbut they are initialized with LDO13 regulator. This causes\nLDO13 to be on whenever these slots are active even though\nthe SDC1 (which is actually powered through LDO13) is not\ninterested, and in worst case, if SD card is present this\ncan cause additional idle state current leakage on SDC1_VDD line.\n\nCRs-Fixed: 337704\nChange-Id: If1d80ff420bb578f2fa891d83fc5927c784a599d\nSigned-off-by: Sujit Reddy Thumma \u003csthumma@codeaurora.org\u003e\n" }, { "commit": "2d0f643c2d49c0183ef059164d4abdf7d37de7d1", "tree": "80a6f15dce8cf51f735d9c2600a941f8c66d4885", "parents": [ "5e0f482227d88c6e689e8dfbd3d9741c2f9e582d" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Mon Nov 07 20:22:08 2011 -0800" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 24 23:37:00 2012 -0700" }, "message": "msm: clock-9615: Update the sdc frequency table and FMAX values.\n\nThe 9615 frequency plan has been updated to support new sdc clock\nfrequencies. During this update the fmax values were also\nmodified match the new frequency plan. Update the code\naccordingly.\n\nChange-Id: If13751842c4a35dd6ff13eb6846865b8f58c5193\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "fe02b0c0c16eaa3f3c7c71aac7a77b8e78951f76", "tree": "a7205606fcd7a5e04019c3936449dc7d40912966", "parents": [ "5e0f482227d88c6e689e8dfbd3d9741c2f9e582d" ], "author": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Tue Feb 21 14:48:03 2012 -0800" }, "committer": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Fri Feb 24 15:15:55 2012 -0800" }, "message": "diag: Release mutex in corner case\n\nDIAG driver maintains a table for all registrations by remote\nperipherals and user space applications. In certain cases, the\nnumber of registrations can exceed table capacity. Thus, diag\nre-allocates the table memory, to fit in all registrations.\nThis re-allocation stops at a threshold, even if requirement\nis greater than threshold.\n\nIn such a corner case, if the requirement is greater than threshold,\nthen the mutex might remain locked after filling the table upto full\ncapacity. Adding unlocking condition to release mutex in such cases.\n\nChange-Id: Iefd02795b531e17ff7cfe3be152e32b3e82c68fb\nSigned-off-by: Shalabh Jain \u003cshalabhj@codeaurora.org\u003e\n" }, { "commit": "2892b6bf1e55298f13f49db28c9383c2edb6532e", "tree": "f9ac50d64a3f0551c9e8d4e73431d7a306426e4a", "parents": [ "0564f549826e3bdca452d52ab675388cc8d9d1a0" ], "author": { "name": "Mona Hossain", "email": "mhossain@codeaurora.org", "time": "Fri Feb 17 13:53:11 2012 -0800" }, "committer": { "name": "Mona Hossain", "email": "mhossain@codeaurora.org", "time": "Fri Feb 24 11:15:02 2012 -0800" }, "message": "qseecom: Add qseecom Driver\n\nThis driver is based of the TZCOM (planned to be deprecated soon).\nIt shares the same design as TZCOM with some re-organization and\nnew features added. QSEEcom (Qualcomm Secure Execution environment\nCommunicator) is named accordingly to be consistent with the\nnomenclature used in the secure domain. The following additional\nfeatures (on top of current TZCOM) driver are implemented:\n\n(1) Add support for multi-image loading.\nThe image that was loaded in TZCOM was hard-coded to \"tzapps\".\nDuring a open() tzapps was loaded using pil driver call pil_get().\nThis severly limted the number of images that could be loaded to\none single application: named \"tzapps\". qseecom driver provides a\nway to load any image on request. Client simply send the image\ndata in a specific format and this data is sent over to QSEE\n(Qualcomm Secure Execution enviroment) to load accordingly.\n\n(2) Add support for multi-client.\nTZcom driver did not have provisions to support multiple clients\nto interface with the single tzapp image loaded on the secure\ndomain. The changes added in qseecom driver allows for multiple\nclient to interface with a single image laoded and running in\nsecure domain.\n\n(3) Add support for performance tweaking in QSEE\nAdded capability to send requests to QSEE to set specific clocks\nfor optimal crypto performance. This essentially will increase\nthe crypto performance on the secure domain. The crypto\nfunctionality is used extensively by the current existing qseecom\nclient(s).\n\n(4) Retain legacy support for QSEOS version 1.3.\nIn order for the existing applications to work with old QSEE image,\nqseecom also supports the old mechanism (loading tzapp image via\npil). This was a requirement for existing products that are not\nyet using the latest secure code.\n\nChange-Id: I7cf2d62c612cb4d17b33579e66bee44c9844dfda\nSigned-off-by: Mona Hossain \u003cmhossain@codeaurora.org\u003e\n" }, { "commit": "27fa2829cce97dbd2941e20f3cc932aca7994ff3", "tree": "68ac17ed4f744641d8b18635c98ae2ac9e83d2e0", "parents": [ "6128631f8f0233591dad1f806cd0ad62ca660292" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Feb 22 18:43:27 2012 -0800" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Fri Feb 24 10:23:28 2012 -0800" }, "message": "msm: footswitch: Improve printed error messages\n\nTo be useful, errors messages should include the name of the footswitch\ninvolved.\n\nChange-Id: I7555a427da893a80865fb40ff9ed17d0d3dd788d\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "6128631f8f0233591dad1f806cd0ad62ca660292", "tree": "d12242c319a4e668c0e0f0a27c737dfab358e795", "parents": [ "1875d32f966dd7b0ab5631cd1b81ad6d202c6c42" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Feb 22 15:55:09 2012 -0800" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Fri Feb 24 10:23:19 2012 -0800" }, "message": "msm: clock-8960: Correct 8064 clock table rows for MDP and VPE footswitches\n\nThe MDP footswitch device should be listed as a consumer of tv_src_clk.\nAlso, VPE\u0027s iface clock\u0027s name needs to be corrected to match the proper\nnaming convention and what the footswitch-8x60 driver is expecting.\n\nChange-Id: I08946af4c91688595050337abfe993d83a82d853\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "1875d32f966dd7b0ab5631cd1b81ad6d202c6c42", "tree": "d1a6be7621d5dab79255c7984dc04cc8404ecc71", "parents": [ "5e0f482227d88c6e689e8dfbd3d9741c2f9e582d" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Feb 22 16:11:33 2012 -0800" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Fri Feb 24 10:23:07 2012 -0800" }, "message": "msm: devices: Separate and correct 8064 footswitch device list\n\n8064 does not have GFX2D cores as 8960 did, so do not try to probe those\nfootswitch devices. Do, however, probe the new VCAP core that was not\npresent on 8960.\n\nThe MDP footswitch device on 8064 is temporarily omitted from the table\nuntil stability issues with its integration with the display driver are\nresolved.\n\nChange-Id: I60ceaaec1f2da1c6af0f2523c2a2f6f8134ac8bc\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "e7920738d703304aab33fdbc60b4794d97779c64", "tree": "a23889adad0a61d10cbf4845d837852d743b85de", "parents": [ "5e0f482227d88c6e689e8dfbd3d9741c2f9e582d" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Feb 22 00:01:12 2012 -0800" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Fri Feb 24 10:19:12 2012 -0800" }, "message": "msm: clock-rpm: Remove rpm_branch_clk_get_rate()\n\nThe commit that added support for RPM branch clocks (a6835112)\nwon a merge race with a commit that eliminated the need for\nsingle-rate clocks to specify .get_rate function ops (7949ecb3).\nEliminate the custom .get_rate op and use the rate member of\nstruct clk to store the rate instead.\n\nThis makes the clk_get_rate() implementation for RPM branch\nclocks similar to that of other fixed-rate clocks.\n\nChange-Id: I49efb541727c71f1617d43b3e7085e848427043d\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "c70819f5eb786a035b6807b367e2c5184629da31", "tree": "a230e8d4630547d62205d2235c0f087822d74b95", "parents": [ "5e0f482227d88c6e689e8dfbd3d9741c2f9e582d" ], "author": { "name": "Kuirong Wang", "email": "kuirongw@codeaurora.org", "time": "Wed Feb 08 16:12:23 2012 -0800" }, "committer": { "name": "Kuirong Wang", "email": "kuirongw@codeaurora.org", "time": "Fri Feb 24 09:07:20 2012 -0800" }, "message": "ASoC: msm: Provide the audio sample rate for MI2S port to AFE\n\nThere is a bug in the MI2S hw_ param function which doesn\u0027t provide\nthe audio sample rate to AFE. The bug causes the QDSP watchdog bite.\n\nChange-Id: I100dc746147547955780508b996303b124b93c3c\nSigned-off-by: Kuirong Wang \u003ckuirongw@codeaurora.org\u003e\n" }, { "commit": "07847648b492d5ab19d0152410a00e42c9ce55ea", "tree": "53dfb9a58c012e2da2596f75bcfc4f148ba05597", "parents": [ "6c549919919a31098f377c268a2fe85cc2f7886e" ], "author": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Fri Dec 09 02:57:45 2011 +0530" }, "committer": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Fri Feb 24 21:04:08 2012 +0530" }, "message": "msm: board: Guard HDMI regulator_get for errors.\n\nCheck if regulator_get returns error, if so, handle it gracefully.\nIf not handle properly, it will lead to crash. Regulator is required\nfor HDMI HPD which may differ from target to target. So a check for\nperticular regulator should be taken care of.\n\nChange-Id: I50507afec331b2a147ce512cf3b81faa92c37200\nSigned-off-by: Ajay Singh Parmar \u003caparmar@codeaurora.org\u003e\n" }, { "commit": "fe9c3ecc239bd4bd857c5ad7e281dba83558320a", "tree": "5928636fae86ab00cc63a621337a8312b9dfa0f4", "parents": [ "5e0f482227d88c6e689e8dfbd3d9741c2f9e582d" ], "author": { "name": "Lokesh Kumar Aakulu", "email": "lkumar@codeaurora.org", "time": "Wed Feb 22 19:26:29 2012 +0530" }, "committer": { "name": "Lokesh Kumar Aakulu", "email": "lkumar@codeaurora.org", "time": "Fri Feb 24 19:36:41 2012 +0530" }, "message": "msm: board-7627a: Add Support to Auto Focus on OV5647 sensor\n\nAdd Support to Enable Auto Focus on OV5647 sensor\nAuto Focus drives camera sensor lens to acheive\nsharp image quality.\n\nChange-Id: Ia46221be8ba79d47779b76c89200627d020024b8\nSigned-off-by: Lokesh Kumar Aakulu \u003clkumar@codeaurora.org\u003e\n" }, { "commit": "9a42993772086292114a224085fdf0d8b161ac0a", "tree": "55b4dd18b29d06d4ce7df66fb9ee5e8c98e06724", "parents": [ "5e0f482227d88c6e689e8dfbd3d9741c2f9e582d" ], "author": { "name": "Chintan Pandya", "email": "cpandya@codeaurora.org", "time": "Mon Feb 13 19:14:16 2012 +0530" }, "committer": { "name": "Chintan Pandya", "email": "cpandya@codeaurora.org", "time": "Fri Feb 24 19:25:00 2012 +0530" }, "message": "msm: pmu: Change resource struct to array of resources\n\nChange-Id: I657f73e7cda1ff105e5ac171680c836d48e9026b\nSigned-off-by: Chintan Pandya \u003ccpandya@codeaurora.org\u003e\n" }, { "commit": "5e0f482227d88c6e689e8dfbd3d9741c2f9e582d", "tree": "293745b5d5b4a4bd0d02e61575c4701a2fd94c16", "parents": [ "4b62e74dd89a3928e3da27ecf4592a6773bec0fa", "aa227029a6858370b5a854f14c85bacf449789f2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 24 04:46:30 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Feb 24 04:46:30 2012 -0800" }, "message": "Merge \"defconfig: 7x27a: Enable SPMv2 configuration\" into msm-3.0" }, { "commit": "4b62e74dd89a3928e3da27ecf4592a6773bec0fa", "tree": "aa84e937279d71d5bbe2c73cfecfa88be420fe07", "parents": [ "8b33378ef1dc9311f51d53993790c8df67ec1e23", "f3e34e5d2b85478346bf3a826d2e0a74e67b97aa" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 24 04:46:30 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Feb 24 04:46:30 2012 -0800" }, "message": "Merge \"USB: gadget: Enable streaming mode support in hardware\" into msm-3.0" }, { "commit": "8b33378ef1dc9311f51d53993790c8df67ec1e23", "tree": "ce8cc9e2674827b5d69a1d0034dd37dc253c49d0", "parents": [ "74f6473fbbd6703ec5ea8d901a70218e1bf35f6f", "a84982a54ca8deafcd3afc584c4a1a59c2c5f10d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 24 04:46:30 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Feb 24 04:46:30 2012 -0800" }, "message": "Merge changes I5016e03f,Ic9272330,I4ad10f5e into msm-3.0\n\n* changes:\n ASoc: msm: Fix array index out of bound issue\n ASoc: msm: Fix Null dereferencing and variable initialization\n ASoC: wcd9310: Fix memory leak and NULL dereferencing\n" }, { "commit": "74f6473fbbd6703ec5ea8d901a70218e1bf35f6f", "tree": "631c9f14c011361ec07c3a6246972577c33f1f06", "parents": [ "68f4b749782e09566b3282377fb59d8e6c4dcde9", "69d35e3b70f98a77fe7837bd5aaa5aaf2d98362c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Feb 24 04:46:30 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Feb 24 04:46:30 2012 -0800" }, "message": "Merge \"msm: bam_dmux: Vote for CXO when bam is in use\" into msm-3.0" }, { "commit": "b69202b62234d2a3103117536ed637bde87dcc2b", "tree": "d68ad671c2c2f862b4b566ffd3aedc373506b445", "parents": [ "68f4b749782e09566b3282377fb59d8e6c4dcde9" ], "author": { "name": "Ayaz Ahmad", "email": "aahmad@codeaurora.org", "time": "Thu Feb 23 19:24:46 2012 +0530" }, "committer": { "name": "Ayaz Ahmad", "email": "aahmad@codeaurora.org", "time": "Fri Feb 24 16:52:47 2012 +0530" }, "message": "radio: iris: Fix the set station issue at boundary\n\nSeek frequency at lower/upper limit is not working\nif selected country is in Europe band with channel\n spacing 50Khz\n\nUse the correct upper limit for Europe band\n\nChange-Id: Icdcb116c24ae9840cc66b1dc2da5fa739a2f89c8\nCRs-Fixed: 338137\nSigned-off-by: Ayaz Ahmad \u003caahmad@codeaurora.org\u003e\n" }, { "commit": "68f4b749782e09566b3282377fb59d8e6c4dcde9", "tree": "cc33d1a353a58bb65c41cb492e2401136acd4063", "parents": [ "0564f549826e3bdca452d52ab675388cc8d9d1a0", "d00708822d3ce95d33e85b453590b29a8b28ae31" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 23 21:36:41 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Feb 23 21:36:41 2012 -0800" }, "message": "Merge \"msm: kgsl: Update A3XX REG_TO_MEM opcodes in legacy context switch\" into msm-3.0" }, { "commit": "cad865a0c5b191d984ef681d240f96694cc237f9", "tree": "927329f0d49368c5832dda9bafde07f8057de52d", "parents": [ "4f11b8178fadbd077e0e5ce7a15b25cc81cb0c44" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Feb 09 17:14:02 2012 -0800" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Feb 23 18:28:38 2012 -0800" }, "message": "power: pm8921-bms: adjust battery tolerances based on charging state\n\nSome board designs have grounding issues where current flows from\nexternal common ground instead of the rsense resistor. This is typically\nseen on a fake battery power supply setup which also has another device\n(such as a callbox) connected to the system ground. IOW the gnd of the\npower supply and the ground of the callbox are same and the current flows\nfrom this common ground instead of rsense.\n\nThis causes the BMS to see incorrect battery current direction, it thinks\nthe battery is being charged and moves to a high load state. It recovers\nafter a while to move back in to low load state. This transition continues\ncausing irregular increase in sleep current.\n\nFix this by increasing the battery tolerance while not charging.\n\nCRs-Fixed: 337827\nChange-Id: I824387568e93191365faead05a70850f0eed423d\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "c802017219171609538a6ed5d0b789480e5881df", "tree": "792777ca59a5cb787a732bcdd25adb212606b325", "parents": [ "0564f549826e3bdca452d52ab675388cc8d9d1a0" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Mon Jan 23 19:17:10 2012 -0800" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Thu Feb 23 18:24:46 2012 -0800" }, "message": "msm: Add QPNP support routines\n\nQPNP is a SPMI based PMIC architecture developed by Qualcomm.\nThis library constitutes routines that should be necessary for\nmost, if not all QPNP based devices. The goal is to minimize the\namount of code duplication.\n\nChange-Id: I0fddfcef88416bba488480d790d1cf361d9e67ac\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "e78dfb677f8032cf6a8112e0459497166aed073b", "tree": "152bcb0c3c3fc339c4afc30e507719cb5e7c4ead", "parents": [ "0564f549826e3bdca452d52ab675388cc8d9d1a0" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Tue Feb 21 10:29:29 2012 -0800" }, "committer": { "name": "Shiv Maliyappanahalli", "email": "smaliyap@codeaurora.org", "time": "Thu Feb 23 17:44:05 2012 -0800" }, "message": "msm: pm-8x60: Save and restore the GIC_CPU_CTRL during power collapse\n\n9615 runs in secure mode and has different QGIC settings. Instead of\nwriting 0x1, read the GIC_CPU_CTRL register before power-collapse and\nrestore the value during resume.\nThis makes sure that power-collapse continues to work on all targets.\n\nChange-Id: I094c4605b89559d777587394ff9f479640459e0a\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "ff10d072f13a0845fc4e6dc0f82d2f51d9209e6e", "tree": "1507f16a8fa76d6abf4629a5d7dee6346710b983", "parents": [ "0564f549826e3bdca452d52ab675388cc8d9d1a0" ], "author": { "name": "Carl Vanderlip", "email": "carlv@codeaurora.org", "time": "Wed Feb 15 15:19:29 2012 -0800" }, "committer": { "name": "Carl Vanderlip", "email": "carlv@codeaurora.org", "time": "Thu Feb 23 15:56:11 2012 -0800" }, "message": "video: msm: Allow Enabling of DMA P Hist LUT\n\nHistogram LUT enabling was accidentally disabled by a previous patch. This\npatch allows it to be enabled again, while not conflicting with the patch\nthat previously disabled it.\n\nCRs-Fixed: 336128\nChange-Id: I5106999d79b5fdee255e23d31e5bc7de5d59b937\nSigned-off-by: Carl Vanderlip \u003ccarlv@codeaurora.org\u003e\n" }, { "commit": "0564f549826e3bdca452d52ab675388cc8d9d1a0", "tree": "98055c918a0912d5fb9488be4b3ea584839a0c8e", "parents": [ "6c549919919a31098f377c268a2fe85cc2f7886e", "3a7774b2d5e1b3e6967bc2456be77402cd51b239" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 23 15:21:06 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Feb 23 15:21:06 2012 -0800" }, "message": "Merge \"msm: vidc: Remove duplicate header files\" into msm-3.0" }, { "commit": "de074a7d5ba87d1bd7ed2fe445da9a0f33cb9a30", "tree": "77a90d05fe214410d5062737a1eb711137efce23", "parents": [ "6c549919919a31098f377c268a2fe85cc2f7886e" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed Feb 22 15:39:54 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Thu Feb 23 13:48:18 2012 -0800" }, "message": "gpu: ion: Change from uncached to buffered mapping\n\nPMEM uses buffered mappings when PMEM device is\nopened with O_SYNC flag. ION should have the same\nbehavior as PMEM.\n\nChange ION to provide buffered mappings instead\nof uncached when the O_DSYNC flag is used when\nopening the ION device.\n\nCRs-fixed: 335827\nChange-Id: I369a35a2ff68adc8339380dfbb7721e3d361ee69\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "330e4d532d49161e4270273f1998b659a21eb813", "tree": "ba81adabd6a853f7d2b0774ced7882f20b47b4be", "parents": [ "6c549919919a31098f377c268a2fe85cc2f7886e" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Sat Feb 18 23:11:24 2012 -0800" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 23 13:49:08 2012 -0700" }, "message": "msm: camera: Use csi_vdd only in csid driver\n\ncsi_vdd regulator is not needed for probing camera\nsensor driver. Move csi_vdd regulator from sensor\ndriver power on to csid driver init function\n\nChange-Id: I23d7f571fd9e00b9d35588f6ac7135a5f3caa90f\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "e063a05cb7b869853ac7968c29acc0891b0d70f9", "tree": "59f9124bc0797b699c67419740bd1d7a68c050bc", "parents": [ "6c549919919a31098f377c268a2fe85cc2f7886e" ], "author": { "name": "Huaibin Yang", "email": "huaibiny@codeaurora.org", "time": "Mon Jan 30 16:26:57 2012 -0800" }, "committer": { "name": "Huaibin Yang", "email": "huaibiny@codeaurora.org", "time": "Thu Feb 23 12:16:54 2012 -0800" }, "message": "msm_fb: display: change perf level for 720p landscape video\n\nNew perf level 3 (128M mdp clk) is used to play 720p landscape video,\nchanged from previous perf level 2 (160M mdp clk), to save power.\n\nChange-Id: Ie27de4d2e407513eeb4cfb8fba6dd535a45c1364\nSigned-off-by: Huaibin Yang \u003chuaibiny@codeaurora.org\u003e\n" }, { "commit": "00f29e5fe0c984cc9996b24cd500e26f301cf6bc", "tree": "53120244f2d0984b574c7cfc253ea293707459b6", "parents": [ "6c549919919a31098f377c268a2fe85cc2f7886e" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Mon Feb 13 11:38:45 2012 -0800" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Feb 23 11:46:21 2012 -0800" }, "message": "mfd: pm8921-core: Add support for additional PMIC PM8917 regulators\n\nAdd support for the new regulators available on PMIC PM8917\nbeyond those present on PMIC PM8921.\n\nRegulator changes between PMIC PM8921 and PMIC PM8917:\nPM8917 adds: 6 PMOS LDOs (L30-L35), 1 boost regulator\nPM8917 removes: negative charge pump (NCP)\n\nChange-Id: I663c61277fb42301724230b73e93f819e55b08c4\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "fd193ebd578a4d61f4069180aa2ce54cef3b2b97", "tree": "7b1da3ca83946754cadd6c434d7b00a7a68a6cfd", "parents": [ "58f3973bd4f7d3a082ce896219351fecef8544c7" ], "author": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Wed Feb 22 15:38:08 2012 -0800" }, "committer": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Thu Feb 23 11:07:16 2012 -0800" }, "message": "usb: ehci-msm-hsic: Fix unbalanced clock warning\n\nThe HSIC controller may be in suspend state in which its clocks\nare already disabled. Fix warning given by clock subsystem when\ndisabling the clocks a second time when the controller\u0027s platform\ndevice is removed by first checking if the device is suspended.\n\nChange-Id: Id6e6f01673b93a48de5e36afe3de44a5a4dc632e\nSigned-off-by: Jack Pham \u003cjackp@codeaurora.org\u003e\n" }, { "commit": "58f3973bd4f7d3a082ce896219351fecef8544c7", "tree": "4441377c4f69862ac90b400aaab588a76bf7eb59", "parents": [ "6c549919919a31098f377c268a2fe85cc2f7886e" ], "author": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Wed Feb 22 17:42:46 2012 -0800" }, "committer": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Thu Feb 23 11:07:15 2012 -0800" }, "message": "usb: ehci: Fix HSIC controller autosuspend\n\nWhen the HSIC peripheral is disconnected, its platform device is\nremoved via platform_device_del(), which increments the PM\ndisable_depth counter. The EHCI driver\u0027s remove callback is\nadditionally calling pm_runtime_disable() which increments the\ncounter again. When the peripheral is reconnected via\nplatform_device_add() only the probe callback is calling\npm_runtime_enable() which leads to an unbalanced counter.\n\nChange-Id: I28bcd20568d93a48c760551b701a234edaec5ecc\nSigned-off-by: Jack Pham \u003cjackp@codeaurora.org\u003e\n" }, { "commit": "9a27d4c55b862eecc1c5eacb7fc0185957b851a0", "tree": "7b42045fbbb7bcb70d3fa19a7b8ebe620af1a325", "parents": [ "4f11b8178fadbd077e0e5ce7a15b25cc81cb0c44" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Thu Feb 23 09:35:16 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Thu Feb 23 09:35:16 2012 -0800" }, "message": "gpu: ion: Add missing argument to iommu map func\n\nThere exists one definition for ion_map_iommu\nfunction when ION is enabled and one definition when\nION is disabled. The argument list for the definition used\nwhen ION is disabled is missing the buffer_size argument causing\ncompilation error for targets that call this function without\nION enabled.\n\nAdd buffer_size argument to ion_map_iommu function\nfor targets that does not have ION enabled.\n\nChange-Id: Ie184e4a6dbec2bc3dff75ab3b25985fd64e2baac\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "6c549919919a31098f377c268a2fe85cc2f7886e", "tree": "7b484c5b43963044b33f947b099f2292b9d1d7b9", "parents": [ "5ce8dd9f0b57ac400e44c8cd56e934c8c6f05c11", "69bf55767a9ca5085a75aa004d23f96a0e8bac02" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 23 06:34:41 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Feb 23 06:34:41 2012 -0800" }, "message": "Merge changes I50ac40e4,Ib318497b into msm-3.0\n\n* changes:\n slim_msm: Remove active channels of a satellite when it restarts\n slimbus: Don\u0027t allow a grouped channel to be controlled individually\n" }, { "commit": "5ce8dd9f0b57ac400e44c8cd56e934c8c6f05c11", "tree": "376ccf623f3a70ef181893ba2f8ea5943178d1bb", "parents": [ "6cdb2c8277a79b5e6b440ff84a96d47679f9f360", "3339457ea96da7d31e8a5e1d66b829de5e2827c0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 23 06:34:41 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Feb 23 06:34:41 2012 -0800" }, "message": "Merge \"msm: camera: Add actuator for AF support\" into msm-3.0" }, { "commit": "6cdb2c8277a79b5e6b440ff84a96d47679f9f360", "tree": "27a55732d49a253d869ab9b9e9d9167a55d2564e", "parents": [ "62cec44d5addcbc052f85ba334ea474cfd19e9b6", "f1ca919d2a881e1c302c4d05c00564bbfb07c648" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 23 06:34:40 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Feb 23 06:34:41 2012 -0800" }, "message": "Merge \"board-8064: usb: hsic: Enable hsic only on fusion platform\" into msm-3.0" } ], "next": "a99fcc24e94481134ca22f9778e88ed31646d6e3" }