)]}' { "log": [ { "commit": "79e030114a8d97a1dcd593ab84fb986f8c91c536", "tree": "ae96f84611dd963c11ce2962a67197030ddd0f3e", "parents": [ "eab0c72aecd7982b2c848f7d493ba379efcef15e" ], "author": { "name": "Ian Campbell", "email": "ian.campbell@xensource.com", "time": "Wed May 02 19:27:09 2007 +0200" }, "committer": { "name": "Andi Kleen", "email": "andi@basil.nowhere.org", "time": "Wed May 02 19:27:09 2007 +0200" }, "message": "[PATCH] i386: Allow i386 crash kernels to handle x86_64 dumps\n\nThe specific case I am encountering is kdump under Xen with a 64 bit\nhypervisor and 32 bit kernel/userspace. The dump created is 64 bit due to\nthe hypervisor but the dump kernel is 32 bit for maximum compatibility.\n\nIt\u0027s possibly less likely to be useful in a purely native scenario but I\nsee no reason to disallow it.\n\n[akpm@linux-foundation.org: build fix]\nSigned-off-by: Ian Campbell \u003cian.campbell@xensource.com\u003e\nSigned-off-by: Andi Kleen \u003cak@suse.de\u003e\nAcked-by: Vivek Goyal \u003cvgoyal@in.ibm.com\u003e\nCc: Horms \u003chorms@verge.net.au\u003e\nCc: Magnus Damm \u003cmagnus.damm@gmail.com\u003e\nCc: \"Eric W. Biederman\" \u003cebiederm@xmission.com\u003e\nCc: Andi Kleen \u003cak@suse.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\n" }, { "commit": "e073ae1b34d5600ffc550407625dcb2d4cf46c6e", "tree": "9f6a7762ab77d4cf0cae0399d5449c72b8fcc0fa", "parents": [ "d039c688c6b3e7217381d2804bc0ca3171913fec" ], "author": { "name": "Ravikiran G Thirumalai", "email": "kiran@scalex86.org", "time": "Wed May 02 19:27:08 2007 +0200" }, "committer": { "name": "Andi Kleen", "email": "andi@basil.nowhere.org", "time": "Wed May 02 19:27:08 2007 +0200" }, "message": "[PATCH] x86-64: Set HASHDIST_DEFAULT to 1 for x86_64 NUMA\n\nEnable system hashtable memory to be distributed among nodes on x86_64 NUMA\n\nForcing the kernel to use node interleaved vmalloc instead of bootmem for\nthe system hashtable memory (alloc_large_system_hash) reduces the memory\nimbalance on node 0 by around 40MB on a 8 node x86_64 NUMA box:\n\nBefore the following patch, on bootup of a 8 node box:\n\nNode 0 MemTotal: 3407488 kB\nNode 0 MemFree: 3206296 kB\nNode 0 MemUsed: 201192 kB\nNode 0 Active: 7012 kB\nNode 0 Inactive: 512 kB\nNode 0 Dirty: 0 kB\nNode 0 Writeback: 0 kB\nNode 0 FilePages: 1912 kB\nNode 0 Mapped: 420 kB\nNode 0 AnonPages: 5612 kB\nNode 0 PageTables: 468 kB\nNode 0 NFS_Unstable: 0 kB\nNode 0 Bounce: 0 kB\nNode 0 Slab: 5408 kB\nNode 0 SReclaimable: 644 kB\nNode 0 SUnreclaim: 4764 kB\n\nAfter the patch (or using hashdist\u003d1 on the kernel command line):\n\nNode 0 MemTotal: 3407488 kB\nNode 0 MemFree: 3247608 kB\nNode 0 MemUsed: 159880 kB\nNode 0 Active: 3012 kB\nNode 0 Inactive: 616 kB\nNode 0 Dirty: 0 kB\nNode 0 Writeback: 0 kB\nNode 0 FilePages: 2424 kB\nNode 0 Mapped: 380 kB\nNode 0 AnonPages: 1200 kB\nNode 0 PageTables: 396 kB\nNode 0 NFS_Unstable: 0 kB\nNode 0 Bounce: 0 kB\nNode 0 Slab: 6304 kB\nNode 0 SReclaimable: 1596 kB\nNode 0 SUnreclaim: 4708 kB\n\nI guess it is a good idea to keep HASHDIST_DEFAULT \"on\" for x86_64 NUMA\nsince x86_64 has no dearth of vmalloc space? Or maybe enable hash\ndistribution for all 64bit NUMA arches? The following patch does it only\nfor x86_64.\n\nI ran a HPC MPI benchmark -- \u0027Ansys wingsolid\u0027, which takes up quite a bit of\nmemory and uses up tlb entries. This was on a 4 way, 2 socket\nTyan AMD box (non vsmp), with 8G total memory (4G pernode).\n\nThe results with and without hash distribution are:\n\n1. Vanilla - runtime of 1188.000s\n2. With hashdist\u003d1 runtime of 1154.000s\n\nOprofile output for the duration of run is:\n\n1. Vanilla:\nPU: AMD64 processors, speed 2411.16 MHz (estimated)\nCounted L1_AND_L2_DTLB_MISSES events (L1 and L2 DTLB misses) with a unit\nmask of 0x00 (No unit mask) count 500\nsamples % app name symbol name\n163054 6.5513 libansys1.so MultiFront::decompose(int, int,\nElemset *, int *, int, int, int)\n162061 6.5114 libansys3.so blockSaxpy6L_fd\n162042 6.5107 libansys3.so blockInnerProduct6L_fd\n156286 6.2794 libansys3.so maxb33_\n87879 3.5309 libansys1.so elmatrixmultpcg_\n84857 3.4095 libansys4.so saxpy_pcg\n58637 2.3560 libansys4.so .st4560\n46612 1.8728 libansys4.so .st4282\n43043 1.7294 vmlinux-t copy_user_generic_string\n41326 1.6604 libansys3.so blockSaxpyBackSolve6L_fd\n41288 1.6589 libansys3.so blockInnerProductBackSolve6L_fd\n\n2. With hashdist\u003d1\nCPU: AMD64 processors, speed 2411.13 MHz (estimated)\nCounted L1_AND_L2_DTLB_MISSES events (L1 and L2 DTLB misses) with a unit\nmask of 0x00 (No unit mask) count 500\nsamples % app name symbol name\n162993 6.9814 libansys1.so MultiFront::decompose(int, int,\nElemset *, int *, int, int, int)\n160799 6.8874 libansys3.so blockInnerProduct6L_fd\n160459 6.8729 libansys3.so blockSaxpy6L_fd\n156018 6.6826 libansys3.so maxb33_\n84700 3.6279 libansys4.so saxpy_pcg\n83434 3.5737 libansys1.so elmatrixmultpcg_\n58074 2.4875 libansys4.so .st4560\n46000 1.9703 libansys4.so .st4282\n41166 1.7632 libansys3.so blockSaxpyBackSolve6L_fd\n41033 1.7575 libansys3.so blockInnerProductBackSolve6L_fd\n35762 1.5318 libansys1.so inner_product_sub\n35591 1.5245 libansys1.so inner_product_sub2\n28259 1.2104 libansys4.so addVectors\n\nSigned-off-by: Pravin B. Shelar \u003cpravin.shelar@calsoftinc.com\u003e\nSigned-off-by: Ravikiran Thirumalai \u003ckiran@scalex86.org\u003e\nSigned-off-by: Shai Fultheim \u003cshai@scalex86.org\u003e\nSigned-off-by: Andi Kleen \u003cak@suse.de\u003e\nAcked-by: Christoph Lameter \u003cclameter@engr.sgi.com\u003e\nCc: Andi Kleen \u003cak@suse.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\n" }, { "commit": "184c44d2049c4db7ef6ec65794546954da2c6a0e", "tree": "73d15a15bea7c5edb75ec7eba53de7791da93317", "parents": [ "a4831e08b7f3ed51623c9eb25e8c945b76b3eda3" ], "author": { "name": "Andrew Morton", "email": "akpm@linux-foundation.org", "time": "Wed May 02 19:27:08 2007 +0200" }, "committer": { "name": "Andi Kleen", "email": "andi@basil.nowhere.org", "time": "Wed May 02 19:27:08 2007 +0200" }, "message": "[PATCH] x86-64: fix x86_64-mm-sched-clock-share\n\nFix for the following patch. Provide dummy cpufreq functions when\nCPUFREQ is not compiled in.\n\nCc: Andi Kleen \u003cak@suse.de\u003e\nCc: Dave Jones \u003cdavej@codemonkey.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Andi Kleen \u003cak@suse.de\u003e\n" }, { "commit": "973efae21beb2feda138f152ed06d4204774d93c", "tree": "72aea5fab6d059b35a79198bf09cc9163338b5c2", "parents": [ "6d1c426158131b11d05d66e7dd6bf91e5b1b4fc7" ], "author": { "name": "Jeremy Fitzhardinge", "email": "jeremy@goop.org", "time": "Wed May 02 19:27:06 2007 +0200" }, "committer": { "name": "Andi Kleen", "email": "andi@basil.nowhere.org", "time": "Wed May 02 19:27:06 2007 +0200" }, "message": "[PATCH] i386: clean up mach_reboot_fixups\n\nThe reboot_fixups stuff seems to be a bit of a mess, specifically the\nheader is in linux/ when its a purely i386-specific piece of code. I\u0027m\nnot sure why it has its config option; its only currently needed for\n\"geode-gx1/cs5530a\", so perhaps whatever config option controls that\nhardware should enable this?\n\nSigned-off-by: Jeremy Fitzhardinge \u003cjeremy@xensource.com\u003e\nSigned-off-by: Andi Kleen \u003cak@suse.de\u003e\n" }, { "commit": "86c0baf123e474b6eb404798926ecf62b426bf3a", "tree": "9977172dc65e9504448d24fda567097f420306a8", "parents": [ "e319af1d8722bc3fb61ed6968c88bb66fbb3f58e" ], "author": { "name": "Prarit Bhargava", "email": "prarit@redhat.com", "time": "Wed May 02 19:27:05 2007 +0200" }, "committer": { "name": "Andi Kleen", "email": "andi@basil.nowhere.org", "time": "Wed May 02 19:27:05 2007 +0200" }, "message": "[PATCH] i386: Change sysenter_setup to __cpuinit \u0026 improve __INIT, __INITDATA\n\nChange sysenter_setup to __cpuinit.\nChange __INIT \u0026 __INITDATA to be cpu hotplug aware.\n\nResolve MODPOST warnings similar to:\n\nWARNING: vmlinux - Section mismatch: reference to .init.text:sysenter_setup from\n .text between \u0027identify_cpu\u0027 (at offset 0xc040a380) and \u0027detect_ht\u0027\n\nand\n\nWARNING: vmlinux - Section mismatch: reference to .init.data:vsyscall_int80_end\nfrom .text between \u0027sysenter_setup\u0027 (at offset 0xc041a269) and \u0027enable_sep_cpu\u0027\nWARNING: vmlinux - Section mismatch: reference to\n.init.data:vsyscall_int80_start from .text between \u0027sysenter_setup\u0027 (at offset\n0xc041a26e) and \u0027enable_sep_cpu\u0027\nWARNING: vmlinux - Section mismatch: reference to\n.init.data:vsyscall_sysenter_end from .text between \u0027sysenter_setup\u0027 (at offset\n0xc041a275) and \u0027enable_sep_cpu\u0027\nWARNING: vmlinux - Section mismatch: reference to\n.init.data:vsyscall_sysenter_start from .text between \u0027sysenter_setup\u0027 (at\noffset 0xc041a27a) and \u0027enable_sep_cpu\u0027\n\nSigned-off-by: Prarit Bhargava \u003cprarit@redhat.com\u003e\nSigned-off-by: Andi Kleen \u003cak@suse.de\u003e\n" }, { "commit": "14e38ac823b7b25e3f4e563c182f93fde78167d6", "tree": "f4252518efdd877ee1558ded8bcea4ed130837cc", "parents": [ "11443ec7d9286dd25663516436a14edfb5f43857" ], "author": { "name": "David Rientjes", "email": "rientjes@google.com", "time": "Mon Apr 30 15:09:56 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Apr 30 16:40:41 2007 -0700" }, "message": "pm: include EIO from errno-base.h\n\nFor backwards compatibility, call_platform_enable_wakeup() can return 0\ninstead of -EIO since we aren\u0027t guaranteed to have errno defined.\n\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nSigned-off-by: David Rientjes \u003crientjes@google.com\u003e\nCc: \"Randy.Dunlap\" \u003crdunlap@xenotime.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "11443ec7d9286dd25663516436a14edfb5f43857", "tree": "121137dbd7b323cd5dce71cbb8da8119a642b731", "parents": [ "9684e51cd157607f0727c1550e7df6e31de40808" ], "author": { "name": "Jeremy Fitzhardinge", "email": "jeremy@goop.org", "time": "Mon Apr 30 15:09:56 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Apr 30 16:40:40 2007 -0700" }, "message": "Add kvasprintf()\n\nAdd a kvasprintf() function to complement kasprintf().\n\nNo in-tree users yet, but I have some coming up.\n\n[akpm@linux-foundation.org: EXPORT it]\nSigned-off-by: Jeremy Fitzhardinge \u003cjeremy@xensource.com\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nCc: Keir Fraser \u003ckeir@xensource.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "9684e51cd157607f0727c1550e7df6e31de40808", "tree": "eef6e19205a22817ee659cb2dc7b9ae39465c69d", "parents": [ "e8c9c502690efd24b7055bf608e7a3c34216848b" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Apr 30 15:09:55 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Apr 30 16:40:40 2007 -0700" }, "message": "power management: force pm_ops.valid callback to be assigned\n\nThis patch changes the docs and behaviour from \"all states valid\" to \"no\nstates valid\" if no .valid callback is assigned. Users of pm_ops that only\nneed mem sleep can assign pm_valid_only_mem without any overhead, others\nwill require more elaborate callbacks.\n\nNow that all users of pm_ops have a .valid callback this is a safe thing to\ndo and prevents things from getting messy again as they were before.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nAcked-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nLooks-okay-to: Rafael J. Wysocki \u003crjw@sisk.pl\u003e\nCc: \u003clinux-pm@lists.linux-foundation.org\u003e\nCc: Greg KH \u003cgreg@kroah.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "e8c9c502690efd24b7055bf608e7a3c34216848b", "tree": "1583f34ec9cac07ddfdcb24de66e49718b107436", "parents": [ "11d77d0c01b80e44c7aceb21928508dafce774f9" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Apr 30 15:09:54 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Apr 30 16:40:40 2007 -0700" }, "message": "power management: implement pm_ops.valid for everybody\n\nAlmost all users of pm_ops only support mem sleep, don\u0027t check in .valid and\ndon\u0027t reject any others in .prepare so users can be confused if they check\n/sys/power/state, especially when new states are added (these would then\nresult in s-t-r although they\u0027re supposed to be something different).\n\nThis patch implements a generic pm_valid_only_mem function that is then\nexported for users and puts it to use in almost all existing pm_ops.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nAcked-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nCc: linux-pm@lists.linux-foundation.org\nCc: Len Brown \u003clenb@kernel.org\u003e\nAcked-by: Russell King \u003crmk@arm.linux.org.uk\u003e\nCc: Greg KH \u003cgreg@kroah.com\u003e\nCc: \"Rafael J. Wysocki\" \u003crjw@sisk.pl\u003e\nCc: Paul Mundt \u003clethal@linux-sh.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "11d77d0c01b80e44c7aceb21928508dafce774f9", "tree": "4952f15df4ea2fcdba824aec5689ee9c0c7ceb90", "parents": [ "fe0c935a6cbf25d72a27c7a345df8a2151de0b74" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Apr 30 15:09:53 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Apr 30 16:40:40 2007 -0700" }, "message": "power management: remove firmware disk mode\n\nThis patch removes the firmware disk suspend mode which is the wrong approach,\nit is supposed to be used for implementing firmware-based disk suspend but\ncannot actually be used for that.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nAcked-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nCc: \u003clinux-pm@lists.linux-foundation.org\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nCc: Len Brown \u003clenb@kernel.org\u003e\nAcked-by: Russell King \u003crmk@arm.linux.org.uk\u003e\nCc: Greg KH \u003cgreg@kroah.com\u003e\nCc: \"Rafael J. Wysocki\" \u003crjw@sisk.pl\u003e\nCc: Paul Mundt \u003clethal@linux-sh.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "fe0c935a6cbf25d72a27c7a345df8a2151de0b74", "tree": "841a847412694ee586b0ca7e1e2ce7c45700d9b1", "parents": [ "1173a729fc3ce2fa0d698bd39be8ff7bf6c70bf1" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Apr 30 15:09:51 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Apr 30 16:40:40 2007 -0700" }, "message": "rework pm_ops pm_disk_mode, kill misuse\n\nThis patch series cleans up some misconceptions about pm_ops. Some users of\nthe pm_ops structure attempt to use it to stop the user from entering suspend\nto disk, this, however, is not possible since the user can always use\n\"shutdown\" in /sys/power/disk and then the pm_ops are never invoked. Also,\nplatforms that don\u0027t support suspend to disk simply should not allow\nconfiguring SOFTWARE_SUSPEND (read the help text on it, it only selects\nsuspend to disk and nothing else, all the other stuff depends on PM).\n\nThe pm_ops structure is actually intended to provide a way to enter\nplatform-defined sleep states (currently supported states are \"standby\" and\n\"mem\" (suspend to ram)) and additionally (if SOFTWARE_SUSPEND is configured)\nallows a platform to support a platform specific way to enter low-power mode\nonce everything has been saved to disk. This is currently only used by ACPI\n(S4).\n\nThis patch:\n\nThe pm_ops.pm_disk_mode is used in totally bogus ways since nobody really\nseems to understand what it actually does.\n\nThis patch clarifies the pm_disk_mode description.\n\nIt also removes all the arm and sh users that think they can veto suspend to\ndisk via pm_ops; not so since the user can always do echo shutdown \u003e\n/sys/power/disk, they need to find a better way involving Kconfig or such.\n\nACPI is the only user left with a non-zero pm_disk_mode.\n\nThe patch also sets the default mode to shutdown again, but when a new pm_ops\nis registered its pm_disk_mode is selected as default, that way the default\nstays for ACPI where it is apparently required.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nAcked-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nCc: \u003clinux-pm@lists.linux-foundation.org\u003e\nCc: Len Brown \u003clenb@kernel.org\u003e\nAcked-by: Russell King \u003crmk@arm.linux.org.uk\u003e\nCc: Greg KH \u003cgreg@kroah.com\u003e\nCc: \"Rafael J. Wysocki\" \u003crjw@sisk.pl\u003e\nAcked-by: Paul Mundt \u003clethal@linux-sh.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "42e380832a6911c8a3173ee0172fbc0e4864d80b", "tree": "f336312f9476b62bc6f00a85d5506b1cd1c18d4f", "parents": [ "de34ed91c4ffa4727964a832c46e624dd1495cf5" ], "author": { "name": "Robert Peterson", "email": "rpeterso@redhat.com", "time": "Mon Apr 30 15:09:48 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Apr 30 16:40:39 2007 -0700" }, "message": "Extend print_symbol capability\n\nToday\u0027s print_symbol function dumps a kernel symbol with printk. This\npatch extends the functionality of kallsyms.c so that the symbol lookup\nfunction may be used without the printk. This is useful for modules that\nwant to dump symbols elsewhere, for example, to debugfs. I intend to use\nthe new function call in the GFS2 file system (which will be a separate\npatch).\n\n[akpm@linux-foundation.org: build fix]\n[clameter@sgi.com: sprint_symbol should return length of string like sprintf]\nSigned-off-by: Robert Peterson \u003crpeterso@redhat.com\u003e\nCc: Rusty Russell \u003crusty@rustcorp.com.au\u003e\nCc: Roman Zippel \u003czippel@linux-m68k.org\u003e\nCc: \"Randy.Dunlap\" \u003crdunlap@xenotime.net\u003e\nCc: Sam Ravnborg \u003csam@ravnborg.org\u003e\nAcked-by: Paulo Marques \u003cpmarques@grupopie.com\u003e\nSigned-off-by: Christoph Lameter \u003cclameter@sgi.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "d6454706c382ab74e2ecad7803c434cc6bd30343", "tree": "2a380b28eb948d114c491f0b6799c10406030849", "parents": [ "152a6a9da1bd3ed5dcbbf6ff17c7ebde0eb9a754", "11941a321d49cd2cafc8e64f66cbfed60fc1c691" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Apr 30 08:58:21 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Apr 30 08:58:21 2007 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid\n\n* \u0027for-linus\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: (21 commits)\n USB HID: don\u0027t warn on idVendor \u003d\u003d 0\n USB HID: add \u0027quirks\u0027 module parameter\n USB HID: add support for dynamically-created quirks\n USB HID: clarify static quirk handling as squirks\n USB HID: encapsulate quirk handling into hid-quirks.c\n USB HID: EMS USBII device needs HID_QUIRK_MULTI_INPUT\n HID: update copyright and authorship macro\n HID: introduce proper zeroing of unused bits in output reports\n USB HID: add support for WiseGroup MP-8800 Quad Joypad\n USB HID: add FF support for Logitech Force 3D Pro Joystick\n USB HID: numlock quirk for dell W7658 keyboard\n USB HID: Logitech MX3000 keyboard needs report descriptor quirk\n USB HID: extend quirk for Logitech S510 keyboard\n USB HID: usbkbd/usbmouse - handle errors when registering devices\n USB HID: add QUIRK_HIDDEV for Belkin Flip KVM\n HID: enable dead keys on a belkin wireless keyboard\n USB HID: Thustmaster firestorm dual power v1 support\n USB HID: specify explicit size for hid_blacklist.quirks\n USB HID: fix retry \u0026 reset logic\n USB HID: consolidate vendor/product ids\n ...\n" }, { "commit": "152a6a9da1bd3ed5dcbbf6ff17c7ebde0eb9a754", "tree": "cad354802870b7d4bc0402a6a6da44bd1f610bc6", "parents": [ "cd9bb7e7367c03400d6e918fd3502820fc3b9084", "80787ebc2bbd8e675d8b9ff8cfa40f15134feebe" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Apr 30 08:14:42 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Apr 30 08:14:42 2007 -0700" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\n* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)\n [IPV4] SNMP: Support OutMcastPkts and OutBcastPkts\n [IPV4] SNMP: Support InMcastPkts and InBcastPkts\n [IPV4] SNMP: Support InTruncatedPkts\n [IPV4] SNMP: Support InNoRoutes\n [SNMP]: Add definitions for {In,Out}BcastPkts\n [TCP] FRTO: RFC4138 allows Nagle override when new data must be sent\n [TCP] FRTO: Delay skb available check until it\u0027s mandatory\n [XFRM]: Restrict upper layer information by bundle.\n [TCP]: Catch skb with S+L bugs earlier\n [PATCH] INET : IPV4 UDP lookups converted to a 2 pass algo\n [L2TP]: Add the ability to autoload a pppox protocol module.\n [SKB]: Introduce skb_queue_walk_safe()\n [AF_IUCV/IUCV]: smp_call_function deadlock\n [IPV6]: Fix slab corruption running ip6sic\n [TCP]: Update references in two old comments\n [XFRM]: Export SPD info\n [IPV6]: Track device renames in snmp6.\n [SCTP]: Fix sctp_getsockopt_local_addrs_old() to use local storage.\n [NET]: Remove NETIF_F_INTERNAL_STATS, default to internal stats.\n [NETPOLL]: Remove CONFIG_NETPOLL_RX\n ...\n" }, { "commit": "cd9bb7e7367c03400d6e918fd3502820fc3b9084", "tree": "66eda61f9b28eff39a91b7a819579616161266e3", "parents": [ "24a77daf3d80bddcece044e6dc3675e427eef3f3", "07e44708059010aa26c6a4c8ee6ff11743d04d4e" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Apr 30 08:12:39 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Apr 30 08:12:39 2007 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.dk/data/git/linux-2.6-block\n\n* \u0027for-linus\u0027 of git://git.kernel.dk/data/git/linux-2.6-block:\n [PATCH] elevator: elv_list_lock does not need irq disabling\n [BLOCK] Don\u0027t pin lots of memory in mempools\n cfq-iosched: speedup cic rb lookup\n ll_rw_blk: add io_context private pointer\n cfq-iosched: get rid of cfqq hash\n cfq-iosched: tighten queue request overlap condition\n cfq-iosched: improve sync vs async workloads\n cfq-iosched: never allow an async queue idling\n cfq-iosched: get rid of -\u003edispatch_slice\n cfq-iosched: don\u0027t pass unused preemption variable around\n cfq-iosched: get rid of -\u003ecur_rr and -\u003ecfq_list\n cfq-iosched: slice offset should take ioprio into account\n [PATCH] cfq-iosched: style cleanups and comments\n cfq-iosched: sort IDLE queues into the rbtree\n cfq-iosched: sort RT queues into the rbtree\n [PATCH] cfq-iosched: speed up rbtree handling\n cfq-iosched: rework the whole round-robin list concept\n cfq-iosched: minor updates\n cfq-iosched: development update\n cfq-iosched: improve preemption for cooperating tasks\n" }, { "commit": "24a77daf3d80bddcece044e6dc3675e427eef3f3", "tree": "2c5e0b0bea394d6fe62c5d5857c252e83e48ac48", "parents": [ "e389f9aec689209724105ae80a6c91fd2e747bc9", "f900e9777fc9b65140cb9570438597bc8fae56ab" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Apr 30 08:10:12 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Mon Apr 30 08:10:12 2007 -0700" }, "message": "Merge branch \u0027for-2.6.22\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc\n\n* \u0027for-2.6.22\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (255 commits)\n [POWERPC] Remove dev_dbg redefinition in drivers/ps3/vuart.c\n [POWERPC] remove kernel module option for booke wdt\n [POWERPC] Avoid putting cpu node twice\n [POWERPC] Spinlock initializer cleanup\n [POWERPC] ppc4xx_sgdma needs dma-mapping.h\n [POWERPC] arch/powerpc/sysdev/timer.c build fix\n [POWERPC] get_property cleanups\n [POWERPC] Remove the unused HTDMSOUND driver\n [POWERPC] cell: cbe_cpufreq cleanup and crash fix\n [POWERPC] Declare enable_kernel_spe in a header\n [POWERPC] Add dt_xlate_addr() to bootwrapper\n [POWERPC] bootwrapper: CONFIG_ -\u003e CONFIG_DEVICE_TREE\n [POWERPC] Don\u0027t define a custom bd_t for Xilixn Virtex based boards.\n [POWERPC] Add sane defaults for Xilinx EDK generated xparameters files\n [POWERPC] Add uartlite boot console driver for the zImage wrapper\n [POWERPC] Stop using ppc_sys for Xilinx Virtex boards\n [POWERPC] New registration for common Xilinx Virtex ppc405 platform devices\n [POWERPC] Merge common virtex header files\n [POWERPC] Rework Kconfig dependancies for Xilinx Virtex ppc405 platform\n [POWERPC] Clean up cpufreq Kconfig dependencies\n ...\n" }, { "commit": "71ff6c0a857d11e70aec0c8f1e0d4ae9a45dd468", "tree": "31341eafc2de1f66d3e4359a00d1f08bc1d1149c", "parents": [ "d551e4541dd60ae53459f77a971f2d6043431f5f" ], "author": { "name": "Mitsuru Chinen", "email": "mitch@linux.vnet.ibm.com", "time": "Mon Apr 30 00:45:02 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@sunset.davemloft.net", "time": "Mon Apr 30 00:58:19 2007 -0700" }, "message": "[SNMP]: Add definitions for {In,Out}BcastPkts\n\nThe updated IP-MIB RFC (RFC4293) specifys new objects, InBcastPkts\nand OutBcastPkts. This adds definitions for them.\n\nSigned-off-by: Mitsuru Chinen \u003cmitch@linux.vnet.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "07e44708059010aa26c6a4c8ee6ff11743d04d4e", "tree": "06a249ed6100af3d89623237d2af5430d5fc0525", "parents": [ "2a12dcd71a5e0667b33f7b47bcac95c71d551840", "597bc485d6906359ad667fc8ead5e5f0ede03a0a" ], "author": { "name": "Jens Axboe", "email": "axboe@nelson.home.kernel.dk", "time": "Mon Apr 30 09:09:27 2007 +0200" }, "committer": { "name": "Jens Axboe", "email": "axboe@nelson.home.kernel.dk", "time": "Mon Apr 30 09:09:27 2007 +0200" }, "message": "Merge branch \u0027cfq\u0027 into for-linus\n" }, { "commit": "5972511b77809cb7c9ccdb79b825c54921c5c546", "tree": "8dec5821badf9750be04f339f0f621fab2114c8a", "parents": [ "b9099ff63c75216d6ca10bce5a1abcd9293c27e6" ], "author": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Mon Apr 02 10:06:42 2007 +0200" }, "committer": { "name": "Jens Axboe", "email": "axboe@nelson.home.kernel.dk", "time": "Mon Apr 30 09:08:17 2007 +0200" }, "message": "[BLOCK] Don\u0027t pin lots of memory in mempools\n\nCurrently we scale the mempool sizes depending on memory installed\nin the machine, except for the bio pool itself which sits at a fixed\n256 entry pre-allocation.\n\nThere\u0027s really no point in \"optimizing\" this OOM path, we just need\nenough preallocated to make progress. A single unit is enough, lets\nscale it down to 2 just to be on the safe side.\n\nThis patch saves ~150kb of pinned kernel memory on a 32-bit box.\n\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "46f8914e53c28d0716c586e08a7c819d8ebb9d54", "tree": "722beec8d5a83d6c13b455e69ab567197e065c55", "parents": [ "04b090d50c88ac8e5ec9c2e985bb65bd153893aa" ], "author": { "name": "James Chapman", "email": "jchapman@katalix.com", "time": "Mon Apr 30 00:07:31 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Apr 30 00:07:31 2007 -0700" }, "message": "[SKB]: Introduce skb_queue_walk_safe()\n\nThis patch provides a method for walking skb lists while inserting or\nremoving skbs from the list.\n\nSigned-off-by: James Chapman \u003cjchapman@katalix.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "4e521c27eee33cebd618c26649e2c93803004647", "tree": "0ad4b1e5df66da0848074cda47a79f7d7dae75f5", "parents": [ "91fac317a34859986a2359a5a5c0e37dc17a9c3d" ], "author": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Tue Apr 24 21:17:33 2007 +0200" }, "committer": { "name": "Jens Axboe", "email": "axboe@nelson.home.kernel.dk", "time": "Mon Apr 30 09:01:23 2007 +0200" }, "message": "ll_rw_blk: add io_context private pointer\n\nTo be used by as/cfq as they see fit.\n\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "49e1900d4cc2e7bcecb681fe60f0990bec2dcce8", "tree": "253801ebf57e0a23856a2c7be129c2c178f62fdf", "parents": [ "34f6d749c0a328817d5e36274e53121c1db734dc", "b9099ff63c75216d6ca10bce5a1abcd9293c27e6" ], "author": { "name": "Paul Mackerras", "email": "paulus@samba.org", "time": "Mon Apr 30 12:38:01 2007 +1000" }, "committer": { "name": "Paul Mackerras", "email": "paulus@samba.org", "time": "Mon Apr 30 12:38:01 2007 +1000" }, "message": "Merge branch \u0027linux-2.6\u0027 into for-2.6.22\n" }, { "commit": "e389f9aec689209724105ae80a6c91fd2e747bc9", "tree": "3cc88a3e785e4f2ffeaa9dad0da695cfa437d4fe", "parents": [ "f73b0a08eae0e28c50db5dd5ab8245546918bfb6", "b4cf205846463a0a23a917bb18ad833bc9a8c0bb" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sun Apr 29 10:48:48 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sun Apr 29 10:48:48 2007 -0700" }, "message": "Merge branch \u0027upstream-linus\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6\n\n* \u0027upstream-linus\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (107 commits)\n smc911x: fix compilation breakage wjen debug is on\n [netdrvr] eexpress: minor corrections\n add NAPI support to sb1250-mac.c\n ixgb: ROUND_UP macro cleanup in drivers/net/ixgb\n e1000: ROUND_UP macro cleanup in drivers/net/e1000\n Generic HDLC sparse annotations\n e100: Optionally use I/O mode only to access register space\n e100: allow bad MAC address when running with invalid eeprom csum\n ehea: fix for dlpar support\n ehea: fix for sysfs entries\n 3C509: Remove unnecessary include of \u003clinux/pm_legacy.h\u003e\n NetXen: Fix for vmalloc issues\n NetXen: Fixes for Power PC architecture\n NetXen: Port swap feature for multi port cards\n NetXen: Removal of redundant macros\n NetXen: Multi PCI support for Quad cards\n NetXen: Removal of redundant argument passing\n NetXen: Use multiple PCI functions\n [netdrvr e100] experiment with doing RX in a similar manner to eepro100\n [PATCH] ieee80211: add missing global needed by IEEE80211_DEBUG_XXXX\n ...\n" }, { "commit": "f73b0a08eae0e28c50db5dd5ab8245546918bfb6", "tree": "eddc8c063acc7c70a975a0dadf26655159704b22", "parents": [ "6b06d2cc6d52830e3e0c001006b26255f47184dd", "225036314e768bbfe8331ea9b0e91ca101afe427" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sun Apr 29 10:48:21 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sun Apr 29 10:48:21 2007 -0700" }, "message": "Merge branch \u0027upstream-linus\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev\n\n* \u0027upstream-linus\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (86 commits)\n SPIN_LOCK_UNLOCKED cleanup in drivers/ata/pata_winbond.c\n drivers/ata/pata_cmd640.c: fix build with CONFIG_PM\u003dn\n pata_hpt37x: Further small fixes\n pata_hpt3x2n: Add HPT371N support and other bits\n ata: printk warning fixes\n libata: separate ATA_EHI_DID_RESET into DID_SOFTRESET and DID_HARDRESET\n ahci: consolidate common port flags\n ata_timing: ensure t-\u003ecycle is always correct\n libata: add missing call to -\u003ecable_detect() in new EH path\n pata_amd: remove contamination added during cable_detect conversion\n libata: Handle drives that require a spin-up command before first access\n libata: HPA support\n libata: kill probe_ent and related helpers\n libata: convert the remaining PATA drivers to new init model\n libata: convert the remaining SATA drivers to new init model\n libata: convert ata_pci_init_native_mode() users to new init model\n libata: convert drivers with combined SATA/PATA ports to new init model\n libata: add init helpers including ata_pci_prepare_native_host()\n libata: convert native PCI host handling to new init model\n libata: convert legacy PCI host handling to new init model\n ...\n" }, { "commit": "6b06d2cc6d52830e3e0c001006b26255f47184dd", "tree": "2df1fbc87b1d83b97b230c207dbe795e2c5c6423", "parents": [ "b9099ff63c75216d6ca10bce5a1abcd9293c27e6", "aac60c11132d7ab0776cf036ac9fd6113a210859" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sun Apr 29 10:47:25 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sun Apr 29 10:47:25 2007 -0700" }, "message": "Merge branch \u0027release\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6\n\n* \u0027release\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (105 commits)\n sonypi: use mutex instead of semaphore\n sony-laptop: remove user visible camera controls as platform attributes\n meye: make meye use sony-laptop instead of sonypi\n sony-laptop: add a meye-usable include file for camera ops\n sony-laptop: complete the motion eye camera support in sony-laptop\n sonypi: try to detect if sony-laptop has already taken one of the known ioports\n sonypi: suggest sonypi users to try sony-laptop instead\n sony-laptop: add edge modem support (also called WWAN)\n sony-laptop: add locking on accesses to the ioport and global vars\n sony-laptop: add camera enable/disable parameter, better handle possible infinite loop\n thinkpad-acpi: make drivers/misc/thinkpad_acpi:fan_mutex static\n ACPI: thinkpad-acpi: add sysfs support to wan and bluetooth subdrivers\n ACPI: thinkpad-acpi: add sysfs support to hotkey subdriver\n ACPI: thinkpad-acpi: improve dock subdriver initialization\n ACPI: thinkpad-acpi: improve debugging for acpi helpers\n ACPI: thinkpad-acpi: improve fan control documentation\n ACPI: thinkpad-acpi: map ENXIO to EINVAL for fan sysfs\n ACPI: thinkpad-acpi: fix a fan watchdog invocation\n ACPI: thinkpad-acpi: do not arm fan watchdog if it would not work\n ACPI: thinkpad-acpi: add a fan-control feature master toggle\n ...\n" }, { "commit": "ecfd6b183780c6d9e85873693b3ce6c5f4d08b58", "tree": "8ee1330176e3011d3fdf86e70b5933b50302b7e7", "parents": [ "5632c5152aa621885d87ea0b8fdd5a6bb9f69c6f" ], "author": { "name": "Jamal Hadi Salim", "email": "hadi@cyberus.ca", "time": "Sat Apr 28 21:20:32 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Apr 28 21:20:32 2007 -0700" }, "message": "[XFRM]: Export SPD info\n\nWith this patch you can use iproute2 in user space to efficiently see\nhow many policies exist in different directions.\n\nSigned-off-by: Jamal Hadi Salim \u003chadi@cyberus.ca\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5a1b5898ee9e0bf68a86609ecb9775457b1857a5", "tree": "c51b0c34ba89472a2b5c59d735a7e1affaa0e244", "parents": [ "d16bfd0c77b35a0a0f0e159b94b9921510bf7934" ], "author": { "name": "Rusty Russell", "email": "rusty@rustcorp.com.au", "time": "Sat Apr 28 21:04:03 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Apr 28 21:04:03 2007 -0700" }, "message": "[NET]: Remove NETIF_F_INTERNAL_STATS, default to internal stats.\n\nHerbert Xu conviced me that a new flag was overkill; every driver\ncurrently overrides get_stats, so we might as well make the internal\none the default. If someone did fail to set get_stats, they would now\nget all 0 stats instead of \"No statistics available\".\n\nSigned-off-by: Rusty Russell \u003crusty@rustcorp.com.au\u003e\nAcked-by: Herbert Xu \u003cherbert@gondor.apana.org.au\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5f286e113fa377e50bd18fc45e5a0d4d83f6950c", "tree": "b55cc97345990a22a6ef94a1775491d5fc68525c", "parents": [ "b9099ff63c75216d6ca10bce5a1abcd9293c27e6" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Sat Apr 28 20:57:37 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Apr 28 20:57:37 2007 -0700" }, "message": "[NETPOLL]: Fix TX queue overflow in trapped mode.\n\nCONFIG_NETPOLL_TRAP causes the TX queue controls to be completely bypassed in\nthe netpoll\u0027s \"trapped\" mode which easily causes overflows in the drivers with\nshort TX queues (most notably, in 8139too with its 4-deep queue). So, make\nthis option more sensible by making it only bypass the TX softirq wakeup.\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nAcked-by: Jeff Garzik \u003cjgarzik@pobox.com\u003e\nAcked-by: Tom Rini \u003ctrini@kernel.crashing.org\u003e\nAcked-by: Matt Mackall \u003cmpm@selenic.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "cfaae3ee4a0d00c6b22780057e958d625499e90c", "tree": "c9be12f3657a7f5ac7c7d45589f2e1592479ac0e", "parents": [ "eaf60d6924759eb2a249c0b568533a90c238061b", "c6c60106b9584f17c55e4c5e0ce9b905a1a6cdb6" ], "author": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Sat Apr 28 23:09:57 2007 -0400" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Sat Apr 28 23:09:57 2007 -0400" }, "message": "Pull sony into release branch\n" }, { "commit": "1ce82c14d06ff68380d7c647f768858e077930c5", "tree": "c2b0bdefc3110076ab7187b60fff9a36da1c48ea", "parents": [ "e364632e740fe9fcb401e5ece3be69e4d81c5a80" ], "author": { "name": "malattia@linux.it", "email": "malattia@linux.it", "time": "Sat Apr 28 23:34:36 2007 +0900" }, "committer": { "name": "Len Brown", "email": "len.brown@intel.com", "time": "Sat Apr 28 22:06:01 2007 -0400" }, "message": "sony-laptop: add a meye-usable include file for camera ops\n\nCopy and rename (for easier co-existence) the MEYE-wise exported interface.\n\nSigned-off-by: Mattia Dongili \u003cmalattia@linux.it\u003e\nSigned-off-by: Len Brown \u003clen.brown@intel.com\u003e\n" }, { "commit": "0d64a233fe6a8fd45a062fe125159854ffed60c7", "tree": "012d6288c549e2186555c280e7960cebf693415d", "parents": [ "1188c0d83ca010c3799711e85e63dbde122e6a90" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Mon Apr 23 02:41:05 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 14:51:33 2007 -0400" }, "message": "libata: separate ATA_EHI_DID_RESET into DID_SOFTRESET and DID_HARDRESET\n\nSeparate ATA_EHI_DID_RESET into ATA_EHI_DID_SOFTRESET and\nATA_EHI_DID_HARDRESET. ATA_EHI_DID_RESET is redefined as OR of the\ntwo flags. This patch doesn\u0027t introduce any behavior change. This\nwill be used later to determine whether _SDD is necessary or not.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "169439c2e35f01e7832a9b4fc8a7446980c3d593", "tree": "83cbc6898be74b2bfb49bd4eaa966913c49de9da", "parents": [ "1e999736cafdffc374f22eed37b291129ef82e4e" ], "author": { "name": "Mark Lord", "email": "liml@rtr.ca", "time": "Tue Apr 17 18:26:07 2007 -0400" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 14:40:40 2007 -0400" }, "message": "libata: Handle drives that require a spin-up command before first access\n\n(S)ATA drives can be configured for \"power-up in standby\",\na mode whereby a specific \"spin up now!\" command is required\nbefore the first media access.\n\nCurrently, a drive with this feature enabled can not be used at all\nwith libata, and once in this mode, the drive becomes a doorstop.\n\nThe older drivers/ide subsystem at least enumerates the drive,\nso that it can be woken up after the fact from a userspace HDIO_*\ncommand, but not libata.\n\nThis patch adds support to libata for the \"power-up in standby\"\nmode where a \"spin up now!\" command (SET_FEATURES) is needed.\nWith this, libata will recognize such drives, spin them up,\nand then re-IDENTIFY them if necessary to get a full/complete\nset of drive features data.\n\nDrives in this state are determined by looking for\nspecial values in id[2], as documented in the current ATA specs.\n\nSigned-off-by: Mark Lord \u003cmlord@pobox.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "1e999736cafdffc374f22eed37b291129ef82e4e", "tree": "d71e0907827841de66f172dec0cc4d550bd2cec8", "parents": [ "6bfff31e77cfa1b13490337e5a4dbaa3407e83ac" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Wed Apr 11 00:23:13 2007 +0100" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 14:16:06 2007 -0400" }, "message": "libata: HPA support\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\n\nAdd support for ignoring the BIOS HPA result (off by default) and setting\nthe disk to the full available size unless already frozen.\n\nTested with various platforms/disks and confirmed to work with the\nMacintosh (which broke earlier) and ata_piix (breakage due to the LBA48\nreadback that Tejun fixed).\n\nFor normal users this brings us, I believe, to feature parity with old IDE\n(and of course more featured in some areas too).\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "6bfff31e77cfa1b13490337e5a4dbaa3407e83ac", "tree": "89f7dc5379453381aed939741fc3a7e46b0465fa", "parents": [ "5d728824efeda61d304153bfcf1378a3c18b7d70" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Tue Apr 17 23:44:08 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 14:16:06 2007 -0400" }, "message": "libata: kill probe_ent and related helpers\n\nAll drivers are converted to new init model. Kill probe_ent,\nata_device_add() and ata_pci_init_native_mode().\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "21b0ad4fb8306ac2bf5a249ffc978b1b8924c7d0", "tree": "9f82cc6a4bca146ce1021f0825cc12f18f9063b9", "parents": [ "d491b27b1959565671e2c05dff09b5f535a854ce" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Tue Apr 17 23:44:07 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 14:16:03 2007 -0400" }, "message": "libata: add init helpers including ata_pci_prepare_native_host()\n\nThese will be used to convert LLDs to new init model.\n\n* Add irq_handler field to port_info. In new init model, requesting\n IRQ is LLD\u0027s responsibility and libata doesn\u0027t need to know about\n irq_handler. Most LLDs can simply register their irq_handler but\n some need different irq_handler depending on specific chip. The\n added port_info-\u003eirq_handler field can be used by LLDs to select\n the matching IRQ handler in such cases.\n\n* Add ata_dummy_port_info.\n\n* Implement ata_pci_prepare_native_host(), a helper to alloc ATA host,\n acquire all resources and init the host in one go.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "d491b27b1959565671e2c05dff09b5f535a854ce", "tree": "207711a735f7460649f21bd9eedff04eb55afa11", "parents": [ "0f834de3ea61aacacf1fac59ba9e82680f83c846" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Tue Apr 17 23:44:07 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 14:16:03 2007 -0400" }, "message": "libata: convert native PCI host handling to new init model\n\nConvert native PCI host handling to alloc-init-register model. New\nfunction ata_pci_init_native_host() follows the new init model and\nreplaces ata_pci_init_native_mode(). As there are remaining LLD\nusers, the old function isn\u0027t removed yet.\n\nata_pci_init_one() is reimplemented using the new function and now\nfully converted to new init model.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "f5cda257296fbd3683b1f568f2d94d3caaacf74d", "tree": "a0c31206f6a7f299c11f233a22f3b8b8aa836151", "parents": [ "f31871951b38daf2d7ca17daad59fdb735062da3" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Tue Apr 17 23:44:07 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 14:16:03 2007 -0400" }, "message": "libata: implement ata_host_alloc_pinfo() and ata_host_register()\n\nImplement ata_host_alloc_pinfo() and ata_host_register(). These helpers\nwill be used in the following patches to adopt new init model.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "f31871951b38daf2d7ca17daad59fdb735062da3", "tree": "4286402eaf679b6fb73e893d8e51bb693559091d", "parents": [ "ecef7253235e7a9365afe08a508e11bed91c1c11" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Tue Apr 17 23:44:07 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 14:16:03 2007 -0400" }, "message": "libata: separate out ata_host_alloc() and ata_host_register()\n\nReorganize ata_host_alloc() and its subroutines into the following\nthree functions.\n\n* ata_host_alloc() : allocates host and its ports. shost is not\n registered automatically.\n\n* ata_scsi_add_hosts() : allocates and adds shosts associated with an\n ATA host. Used by ata_host_register().\n\n* ata_host_register() : takes a fully initialized ata_host structure\n and registers it to libata layer and probes it.\n\nOnly ata_host_alloc() and ata_host_register() are exported.\nata_device_add() is rewritten using the above functions. This patch\ndoes not introduce any observable behavior change. Things worth\nmentioning.\n\n* print_id is assigned at registration time and LLDs are allowed to\n overallocate ports and reduce host-\u003en_ports during initialization.\n ata_host_register() will throw away unused ports automatically.\n\n* All SCSI host initialization stuff now resides in\n ata_scsi_add_hosts() in libata-scsi.c, where it should be.\n\n* ipr is now the only user of ata_host_init(). Either kill it by\n converting ipr to use ata_host_alloc() and friends or rename and\n move it to libata-scsi.c\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "ecef7253235e7a9365afe08a508e11bed91c1c11", "tree": "2d4ae5a148c38a3371a6be609594833733f24c8a", "parents": [ "4911487a34baa89ec5b5f09a661761b73091fbec" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Tue Apr 17 23:44:06 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 14:16:02 2007 -0400" }, "message": "libata: separate out ata_host_start()\n\nSeparate out ata_host_start() from ata_device_add(). ata_host_start()\ncalls -\u003eport_start on each port if available and freezes the port.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "4911487a34baa89ec5b5f09a661761b73091fbec", "tree": "f79f6fa1a061cbbfcaac9a1581c7cf9600a82441", "parents": [ "bf33554290bb6a6b2bd8827076f89fb17fb19e3d" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Tue Apr 17 23:44:06 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 14:16:02 2007 -0400" }, "message": "libata: allocate ap separately from shost\n\nDon\u0027t embed ap inside shost. Allocate it separately and point it back\nfrom shosts\u0027s hostdata. This makes port allocation more flexible and\nallows regular ATA and SAS share host alloc/init paths.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "c65ec1c25dc23123040efdc4ada46071431723e3", "tree": "7c5a6e3f1f8bf3a0a9f74520eb5c1806fba4c5c7", "parents": [ "a51d644af6eb0a93bc383e5f005faa445c87f335" ], "author": { "name": "Conke Hu", "email": "conke.hu@gmail.com", "time": "Wed Apr 11 18:23:14 2007 +0800" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 14:16:02 2007 -0400" }, "message": "ahci.c: remove non-existing SB600 raid id (re-send)\n\n SB600 RAID and SB600 SATA is the same controller and share the\nsame PCI ID 0x4380. There is no such PCI ID 0x4381.\n\n Signed-off-by: Conke Hu \u003cconke.hu@gmail.com\u003e\n ---------\n\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "5a5dbd18a7496ed403f6f54bb20c955c65482fa5", "tree": "031eec40ab42ac4ab04e59db539b8126ac31fb6d", "parents": [ "1234010684bb9cde51125ec3d1c71054a9f24f47" ], "author": { "name": "Mark Lord", "email": "liml@rtr.ca", "time": "Fri Mar 16 10:22:26 2007 -0400" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 14:16:01 2007 -0400" }, "message": "libata: add support for READ/WRITE LONG\n\nThe READ/WRITE LONG commands are theoretically obsolete,\nbut the majority of drives in existance still implement them.\n\nThe WRITE_LONG and WRITE_LONG_ONCE commands are of particular\ninterest for fault injection testing -- eg. creating \"media errors\"\nat specific locations on a disk.\n\nThe fussy bit is that these commands require a non-standard\nsector size, usually 520 bytes instead of 512.\n\nThis patch adds support to libata for READ/WRITE LONG commands\nissued via SG_IO/ATA_16.\n\nSigned-off-by: Mark Lord \u003cmlord@pobox.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "8cdfb29c0cd8018f92214c11c631d8926f4cb032", "tree": "d4a74d25c301e4c045ca21c45dbcbeadde234548", "parents": [ "e424675f152572d8d2365e351b90bfd81686a150" ], "author": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Mar 09 10:54:42 2007 -0500" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 14:15:59 2007 -0400" }, "message": "libata/IDE: remove combined mode quirk\n\nBoth old-IDE and libata should be able handle all controllers and\ndevices found using normal resource reservation methods.\n\nThis eliminates the awful, low-performing split-driver configuration\nwhere old-IDE drove the PATA portion of a PCI device, in PIO-only mode,\nand libata drove the SATA portion of the /same/ PCI device, in DMA mode.\nTypically vendors would ship SATA hard drive / PATA optical\nconfiguration, which would lend itself to slow (PIO-only) CD-ROM\nperformance.\n\nFor Intel users running in combined mode, it is now wholly dependent on\nyour driver choice (potentially link order, if you compile both drivers\nin) whether old-IDE or libata will drive your hardware.\n\nIn either case, you will get full performance from both SATA and PATA\nports now, without having to pass a kernel command line parameter.\n\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "a76b62ca70662cd0ca98edf366c6637009a95f7d", "tree": "1f93b3bec4a77ed3146a1d9de29140c525b35479", "parents": [ "9d2c7c75f889a3eefad016c71f651b0796e0a6e9" ], "author": { "name": "Alan Cox", "email": "alan@redhat.com", "time": "Fri Mar 09 09:34:07 2007 -0500" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 14:15:58 2007 -0400" }, "message": "libata: Change prototype of mode_filter to remove ata_port*\n\nWith Tejun having added adev-\u003eap some time ago we can get rid of the\nalmost unused port being passed to mode filters. And while we are\ndoing filters, lets turn on the !IORDY filter as well.\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\n\nWith some hand massaging from\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "04351821b43e6c0c91ad50d7e4be54a935f749e1", "tree": "1cca629143ad5ac370129a6188f951077059b19b", "parents": [ "fcc2f69a6fad1543b466db9c35aa5a2f364eb3d4" ], "author": { "name": "Alan", "email": "alan@lxorguk.ukuu.org.uk", "time": "Tue Mar 06 02:37:52 2007 -0800" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 14:15:58 2007 -0400" }, "message": "pata: expose set_mode method so it can be wrapped\n\nThis splits set_mode into do_set_mode and the wrapper so that a driver can\ncall the standard method inside its own. This in theory also obsoletes\n-\u003epost_set_mode().\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nCc: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "ec04b075843d12b5115267415d0426b48e672136", "tree": "eddd8a861eb0fd1c455c6a7f042a667bafb45af5", "parents": [ "a73984a0d5664fa1bfdd9f0a475b8d74af7f44a6" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Fri Mar 09 19:45:58 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 14:15:58 2007 -0400" }, "message": "iomap: implement pcim_iounmap_regions()\n\nImplement pcim_iounmap_regions() - the opposite of\npcim_iomap_regions().\n\nSigned-off-by: Tejun heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "be0d18dff5fae83845801929f297977c10ab99ad", "tree": "6551bf28f7123e19cee86717db689e6d8d530973", "parents": [ "5aea408df5ae459cb29b91d45fa0f8bc1bee924e" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Tue Mar 06 02:37:56 2007 -0800" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 14:15:55 2007 -0400" }, "message": "libata: cable detection fixes\n\n2.6.21-rc has horrible problems with libata and PATA cable types (and\nthus speeds). This occurs because Tejun fixed a pile of other bugs and\nwe now do cable detect enforcement for drive side detection properly.\n\nUnfortunately we don\u0027t do the process around cable detection right. Tejun\nidentified the problem and pointed to the right Annex in the spec, this patch\nimplements the rest of the needed changes.\n\nWe add a -\u003ecable_detect() method called after the identify\nsequence which allows a host to do host side detection at this point\nshould it wish, or to modify the results of the drive side identify.\n\nThis separate -\u003ecable_detect method also cleans up a lot of code because\nmany drivers have their own error_handler methods which really just set\nthe cable type.\n\nIf there is no -\u003ecable_detect method the cable type is left alone so a\ndriver setting it earlier (eg because it has the SATA flags set or\nbecause it uses the old error_handler approach) will still do the right\nthing (or at least the same thing) as before.\n\nThis patch simply adds the cable_detect method and helpers it doesn\u0027t use\nthem but other follow up patches will (ie Adrian please don\u0027t submit\npatches to unexport them ;))\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "cd0d3bbcdd650651b7ccfaf55d107e3fc237d95a", "tree": "9c095bdb9056f5b36d3d3640a3f497cabfdd1f92", "parents": [ "d88184fb2348a50f7c34f5d49a901c875b2e0114" ], "author": { "name": "Alan", "email": "alan@lxorguk.ukuu.org.uk", "time": "Fri Mar 02 00:56:15 2007 +0000" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 14:15:55 2007 -0400" }, "message": "libata: dev_config does not need ap and adev passing\n\nIt used to be impossible to get from ata_device to ata_port but that is\nno longer true. Various methods have been cleaned up over time but\ndev_config still takes both and most users don\u0027t need both anyway. Tidy\nthis one up\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "43727fbc753c63f9d2764c56467303698cc52c14", "tree": "66f4d58a5e9098f85e95636abbce675ebea8c523", "parents": [ "351772658a4d1acc0221a6e30676bb0594e74812" ], "author": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sun Feb 25 16:50:52 2007 -0500" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 14:15:54 2007 -0400" }, "message": "[libata] export sata_print_link_status()\n\nTo be used in sata_mv\u0027s exception handling code, and overall is a\ngenerally useful function.\n\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "abf17ffda7b7b6c83a29d7ccea91d46065c6ca3e", "tree": "1ef35e54cb8bfc2fbaf9c1b2b821b5ef7f6bd1c5", "parents": [ "27345bb684140f5f306963e0d6e25a60c7857dfe" ], "author": { "name": "Krzysztof Halasa", "email": "khc@pm.waw.pl", "time": "Fri Apr 27 13:13:33 2007 +0200" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 11:01:07 2007 -0400" }, "message": "Generic HDLC sparse annotations\n\nSparse annotations, including two minor bugfixes.\n\nSigned-off-by: Krzysztof Halasa \u003ckhc@pm.waw.pl\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "728de4c927a3544b6d3da331b634035d4c75ca17", "tree": "5f05e0b318de9c1d517bd7bbca5964249c7cc885", "parents": [ "a999589ccaae16472531e0616f23826ad097aa40" ], "author": { "name": "Kim Phillips", "email": "kim.phillips@freescale.com", "time": "Fri Apr 13 01:26:03 2007 -0500" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 11:01:04 2007 -0400" }, "message": "ucc_geth: migrate ucc_geth to phylib\n\nmigrate ucc_geth to use the common phylib code.\n\nThere are several side effects from doing this:\n\no deprecate \u0027interface\u0027 property specification present\n in some old device tree source files in\n favour of a split \u0027max-speed\u0027 and \u0027interface-type\u0027\n description to appropriately match definitions\n in include/linux/phy.h. Note that \u0027interface\u0027 property\n is still honoured if max-speed or interface-type\n are not present (backward compatible).\no compile-time CONFIG_UGETH_HAS_GIGA is eliminated\n in favour of probe time speed derivation logic.\no adjust_link streamlined to only operate on maccfg2\n and upsmr.r10m, instead of reapplying static initial\n values related to the interface-type.\no Addition of UEC MDIO of_platform driver requires\n platform code add \u0027mdio\u0027 type to id list\n prior to calling of_platform_bus_probe (separate patch).\no ucc_struct_init introduced to reduce ucc_geth_startup\n complexity.\n\nSigned-off-by: Li Yang \u003cleoli@freescale.com\u003e\nSigned-off-by: Kim Phillips \u003ckim.phillips@freescale.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "a999589ccaae16472531e0616f23826ad097aa40", "tree": "bea3f20a970a47fa3cf3fdc721d760d77742c088", "parents": [ "aeb998c124786e8c7fbd6eab347230469e911872" ], "author": { "name": "Kim Phillips", "email": "kim.phillips@freescale.com", "time": "Fri Apr 13 01:25:57 2007 -0500" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 11:01:04 2007 -0400" }, "message": "phylib: add RGMII-ID interface mode definition\n\nThe RGMII spec allows compliance for devices that implement an internal\ndelay on TXC or RXC inside the transmitter. This patch adds an RGMII_ID\ndefinition to support RGMII-ID devices in the phylib.\n\nSigned-off-by: Kim Phillips \u003ckim.phillips@freescale.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "85d32e7b0ea53a11d2a4018d8ad2605052778df7", "tree": "6aa2c8d0bbb456896363b0509a5d2a085214acb1", "parents": [ "e542aa6bd50ba163253e60ba8e7e51c0d56162a7" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Sat Mar 24 17:15:30 2007 -0700" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 11:01:01 2007 -0400" }, "message": "[PATCH] Update my email address from jkmaline@cc.hut.fi to j@w1.fi\n\nAfter 13 years of use, it looks like my email address is finally going\nto disappear. While this is likely to drop the amount of incoming spam\ngreatly ;-), it may also affect more appropriate messages, so let\u0027s\nupdate my email address in various places. In addition, Host AP mailing\nlist is subscribers-only and linux-wireless can also be used for\ndiscussing issues related to this driver which is now shown in\nMAINTAINERS.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "eea221ce48803a92e2319270b2b7b8e21cd470ca", "tree": "ccc84c977466ddf81ee517de6829d0a8f30e991d", "parents": [ "3664006ab9d90caca5c195e11a2b2e400d454265" ], "author": { "name": "Atsushi Nemoto", "email": "anemo@mba.ocn.ne.jp", "time": "Sat Mar 03 23:54:59 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Sat Apr 28 11:00:56 2007 -0400" }, "message": "tc35815 driver update (take 2)\n\nCurrent tc35815 driver is very obsolete and less maintained for a long\ntime. Replace it with a new driver based on one from CELF patch\narchive.\n\nMajor advantages of CELF version (version 1.23, for kernel 2.6.10) are:\n\n* Independent of JMR3927.\n (Actually independent of MIPS, but AFAIK the chip is used only on\n MIPS platforms)\n* TX4938 support.\n* 64-bit proof.\n* Asynchronous and on-demand auto negotiation.\n* High performance on non-coherent architecture.\n* ethtool support.\n* Many bugfixes and cleanups.\n\nAnd improvoments since version 1.23 are:\n\n* TX4939 support.\n* NETPOLL support.\n* NAPI support. (disabled by default)\n* Reduce memcpy on receiving.\n* PM support.\n* Many cleanups and bugfixes.\n\nSigned-off-by: Atsushi Nemoto \u003canemo@mba.ocn.ne.jp\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "f00546363fff1576ceddc2690d47e5f9c1dd2e05", "tree": "f6cb8965b6754fc6ce7570cf1471ebe9874e509a", "parents": [ "50f732ee63b91eb08a29974b36bd63e1150bb642", "28b57cddb3ed4f7999e4b76ef36ebaaf6e2e0c37" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Apr 27 15:34:57 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Apr 27 15:34:57 2007 -0700" }, "message": "Merge git://git.infradead.org/mtd-2.6\n\n* git://git.infradead.org/mtd-2.6: (46 commits)\n [MTD] [MAPS] drivers/mtd/maps/ck804xrom.c: convert pci_module_init()\n [MTD] [NAND] CM-x270 MTD driver\n [MTD] [NAND] Wrong calculation of page number in nand_block_bad()\n [MTD] [MAPS] fix plat-ram printk format\n [JFFS2] Fix compr_rubin.c build after include file elimination.\n [JFFS2] Handle inodes with only a single metadata node with non-zero isize\n [JFFS2] Tidy up licensing/copyright boilerplate.\n [MTD] [OneNAND] Exit loop only when column start with 0\n [MTD] [OneNAND] Fix access the past of the real oobfree array\n [MTD] [OneNAND] Update Samsung OneNAND official URL\n [JFFS2] Better fix for all-zero node headers\n [JFFS2] Improve read_inode memory usage, v2.\n [JFFS2] Improve failure mode if inode checking leaves unchecked space.\n [JFFS2] Fix cross-endian build.\n [MTD] Finish conversion mtd_blkdevs to use the kthread API\n [JFFS2] Obsolete dirent nodes immediately on unlink, where possible.\n Use menuconfig objects: MTD\n [MTD] mtd_blkdevs: Convert to use the kthread API\n [MTD] Fix fwh_lock locking\n [JFFS2] Speed up mount for directly-mapped NOR flash\n ...\n" }, { "commit": "50f732ee63b91eb08a29974b36bd63e1150bb642", "tree": "fdfc63411a34ffbe26a3b0a997aaeff742a0301b", "parents": [ "aa5bc2b58e3344da57f26b62e99e13e91c9e0a94", "a7205b30106a2d4ee268132644cdb292da2d9b41" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Apr 27 14:19:17 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Apr 27 14:19:17 2007 -0700" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6\n\n* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (78 commits)\n USB: update MAINAINERS and CREDITS for Freescale USB driver\n USB: update gadget files for fsl_usb2_udc driver\n USB: add Freescale high-speed USB SOC device controller driver\n USB: quirk for broken suspend of IT8152F/G\n USB: iowarrior.c: timeouts too small in usb_control_msg calls\n USB: dell device id for option.c\n USB: Remove Huawei unusual_devs entry\n USB: CP2101 New Device IDs\n USB: add picdem device to ldusb\n usbfs micro optimitation\n USB: remove ancient/broken CRIS hcd\n usb ethernet gadget, workaround network stack API glitch\n USB: add \"busnum\" attribute for USB devices\n USB: cxacru: ADSL state management\n usbatm: Detect usb device shutdown and ignore failed urbs\n USB: Remove duplicate define of OHCI_QUIRK_ZFMICRO\n USB: BandRich BandLuxe HSDPA Data Card Driver\n USB gadget rndis: fix struct rndis_packet_msg_type unaligned bug\n USB Elan FTDI: check for driver registration status\n USB: sierra: add more checks on shutdown\n ...\n" }, { "commit": "aa5bc2b58e3344da57f26b62e99e13e91c9e0a94", "tree": "c6e9ea1b3ee8af88b3a050b3fba160ea2f77e404", "parents": [ "d868772fff6c4b881d66af8640251714e1aefa98", "d455cf5d0db9e3eb1b204cd4a61d8c5ccfe4305f" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Apr 27 14:18:45 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Apr 27 14:18:45 2007 -0700" }, "message": "Merge branch \u0027master\u0027 of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb\n\n* \u0027master\u0027 of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (184 commits)\n V4L/DVB (5563): Radio-maestro.c Replace radio_ioctl to use video_ioctl2\n V4L/DVB (5562): Radio-gemtek-pci.c Replace gemtek_pci_ioctl to use video_ioctl2\n V4L/DVB (5560): Ivtv: fix incorrect bitwise-and for command flags.\n V4L/DVB (5558): Opera: use 7-bit i2c addresses\n V4L/DVB (5557): Cafe_ccic: check return value of pci_enable_device\n V4L/DVB (5556): Radio-gemtek.c Replace gemtek_ioctl to use video_ioctl2\n V4L/DVB (5555): Radio-aimslab.c Replace rt_ioctl to use video_ioctl2\n V4L/DVB (5554): Fix: vidioc_g_parm were not zeroing the memory\n V4L/DVB (5553): Replace typhoon_do_ioctl to use video_ioctl2\n V4L/DVB (5552): Plan-b: Switch to refcounting PCI API\n V4L/DVB (5551): Plan-b: header change\n V4L/DVB (5550): Radio-sf16fmi.c Replace fmi_do_ioctl to use video_ioctl2\n V4L/DVB (5549): Radio-sf16fmr2.c Replace fmr2_do_ioctl to use video_ioctl2\n V4L/DVB (5548): Fix v4l2 buffer to the length\n V4L/DVB (5547): Add ENUM_FRAMESIZES and ENUM_FRAMEINTERVALS ioctls\n V4L/DVB (5546): Radio-terratec.c Replace tt_do_ioctl to use video_ioctl2\n V4L/DVB (5545): Saa7146: Release capture buffers on device close\n V4L/DVB (5544): Budget-av: Make inversion setting configurable, add KNC ONE V1.0 card\n V4L/DVB (5543): Tda10023: Add support for frontend TDA10023\n V4L/DVB (5542): Budget-av: Remove polarity switching of the clock for DVB-C\n ...\n" }, { "commit": "aa2ce5ca6be480cb139e21258671c2c27826f8ff", "tree": "c6e0cf5fc2693de690fbb970ed8a9b0e9637bf35", "parents": [ "8c9862e512f59ae3f41f83c109be12f93e37bb2d" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Tue Apr 17 17:51:38 2007 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Apr 27 13:28:39 2007 -0700" }, "message": "USB: \u003clinux/usb/ch9.h\u003e minor doc update\n\nMinor doc update to \u003clinux/usb/ch9.h\u003e ... say where USB_DT_CS_* came\nfrom and update the definitions to match how they\u0027re derived there.\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "1941044aa9632aa8debbb94a3c8a5ed0ebddade8", "tree": "ea885677876b793a26cf684eca6f8639478eb222", "parents": [ "38c3cb5b677cf551cd93a494dc5c551271d90ac1" ], "author": { "name": "Alan Stern", "email": "stern@rowland.harvard.edu", "time": "Tue Mar 27 13:33:59 2007 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Apr 27 13:28:39 2007 -0700" }, "message": "USB: add \"last_busy\" field for use in autosuspend\n\nThis patch (as877) adds a \"last_busy\" field to struct usb_device, for\nuse by the autosuspend framework. Now if an autosuspend call comes at\na time when the device isn\u0027t busy but hasn\u0027t yet been idle for long\nenough, the timer can be set to exactly the desired value. And we\nwill be ready to handle things like HID drivers, which can\u0027t maintain\na useful usage count and must rely on the time-of-last-use to decide\nwhen to autosuspend.\n\nThe patch also makes some related minor improvements:\n\n\tMove the calls to the autosuspend condition-checking routine\n\tinto usb_suspend_both(), which is the only place where it\n\treally matters.\n\n\tIf the autosuspend timer is already running, don\u0027t stop\n\tand restart it.\n\n\tReplace immediate returns with gotos so that the optional\n\tdebugging ouput won\u0027t be bypassed.\n\n\tIf autoresume is disabled but the device is already awake,\n\tdon\u0027t return an error for an autoresume call.\n\n\tDon\u0027t try to autoresume a device if it isn\u0027t suspended.\n\t(Yes, this undercuts the previous change -- so sue me.)\n\n\tDon\u0027t duplicate existing code in the autosuspend work routine.\n\n\tFix the kerneldoc in usb_autopm_put_interface(): If an\n\tautoresume call fails, the usage counter is left unchanged.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n\n" }, { "commit": "9f8b17e643fe6aa505629658445849397bda4e4f", "tree": "30c45914f7be9f355db30964323673c7d37080e8", "parents": [ "87840289637e9ea95118ebd76e2e335fdcddd725" ], "author": { "name": "Kay Sievers", "email": "kay.sievers@vrfy.org", "time": "Tue Mar 13 15:59:31 2007 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Apr 27 13:28:37 2007 -0700" }, "message": "USB: make usbdevices export their device nodes instead of using a separate class\n\no The \"real\" usb-devices export now a device node which can\n populate /dev/bus/usb.\n\no The usb_device class is optional now and can be disabled in the\n kernel config. Major/minor of the \"real\" devices and class devices\n are the same.\n\no The environment of the usb-device event contains DEVNUM and BUSNUM to\n help udev and get rid of the ugly udev rule we need for the class\n devices.\n\no The usb-devices and usb-interfaces share the same bus, so I used\n the new \"struct device_type\" to let these devices identify\n themselves. This also removes the current logic of using a magic\n platform-pointer.\n The name of the device_type is also added to the environment\n which makes it easier to distinguish the different kinds of devices\n on the same subsystem.\n\n It looks like this:\n add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1\n ACTION\u003dadd\n DEVPATH\u003d/devices/pci0000:00/0000:00:1d.1/usb2/2-1\n SUBSYSTEM\u003dusb\n SEQNUM\u003d1533\n MAJOR\u003d189\n MINOR\u003d131\n DEVTYPE\u003dusb_device\n PRODUCT\u003d46d/c03e/2000\n TYPE\u003d0/0/0\n BUSNUM\u003d002\n DEVNUM\u003d004\n\nThis udev rule works as a replacement for usb_device class devices:\n SUBSYSTEM\u003d\u003d\"usb\", ACTION\u003d\u003d\"add\", ENV{DEVTYPE}\u003d\u003d\"usb_device\", \\\n NAME\u003d\"bus/usb/$env{BUSNUM}/$env{DEVNUM}\", MODE\u003d\"0644\"\n\nUpdated patch, which needs the device_type patches in Greg\u0027s tree.\n\nI also got a bugzilla assigned for this. :)\n https://bugzilla.novell.com/show_bug.cgi?id\u003d250659\n\n\nSigned-off-by: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n\n" }, { "commit": "2add5229d77a3de08015feef437653e02372162f", "tree": "436109572453656747d6e5b3aec14939b1202ec3", "parents": [ "13f6be01db9ada144f28241f939f4f3f8ec8e40b" ], "author": { "name": "Alan Stern", "email": "stern@rowland.harvard.edu", "time": "Tue Mar 20 14:59:39 2007 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Apr 27 13:28:37 2007 -0700" }, "message": "USB: add power/level sysfs attribute\n\nThis patch (as874) adds another piece to the user-visible part of the\nUSB autosuspend interface. The new power/level sysfs attribute allows\nusers to force the device on (with autosuspend off), force the device\nto sleep (with autoresume off), or return to normal automatic operation.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "eaafbc3a8adab16babe2c20e54ad3ba40d1fbbc9", "tree": "fea84341faf742efe8beeaff03ec94b687b7b26f", "parents": [ "6b157c9bf3bace6eeb4a973da63923ef24995cce" ], "author": { "name": "Alan Stern", "email": "stern@rowland.harvard.edu", "time": "Tue Mar 13 16:39:15 2007 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Apr 27 13:28:35 2007 -0700" }, "message": "USB: Allow autosuspend delay to equal 0\n\nThis patch (as867) adds an entry for the new power/autosuspend\nattribute in Documentation/ABI/testing, and it changes the behavior of\nthe delay value. Now a delay of 0 means to autosuspend as soon as\npossible, and negative values will prevent autosuspend.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "bb74782e621e988555354abba03812982236a3af", "tree": "b7429496a9689292678833bdeb9993ceb7b2a314", "parents": [ "f1c9e30b5e4cdd8aae5f0ea87004b1b61ec41881" ], "author": { "name": "Oliver Neukum", "email": "oneukum@suse.de", "time": "Tue Feb 27 11:30:24 2007 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Apr 27 13:28:33 2007 -0700" }, "message": "USB: additional structure from cdc spec\n\nthis adds another structure for CDC devices to cdc.h.\n\nSigned-off-by: Oliver Neukum \u003coneukum@suse.de\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "d868772fff6c4b881d66af8640251714e1aefa98", "tree": "c95a68d358d5c875d25763ffe9a44fe9f2081f34", "parents": [ "a205752d1ad2d37d6597aaae5a56fc396a770868", "404d5b185b4eb56d6fa2f7bd27833f8df1c38ce4" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Apr 27 12:58:54 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Apr 27 12:58:54 2007 -0700" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6\n\n* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (46 commits)\n dev_dbg: check dev_dbg() arguments\n drivers/base/attribute_container.c: use mutex instead of binary semaphore\n mod_sysfs_setup() doesn\u0027t return errno when kobject_add_dir() failure occurs\n s2ram: add arch irq disable/enable hooks\n define platform wakeup hook, use in pci_enable_wake()\n security: prevent permission checking of file removal via sysfs_remove_group()\n device_schedule_callback() needs a module reference\n s390: cio: Delay uevents for subchannels\n sysfs: bin.c printk fix\n Driver core: use mutex instead of semaphore in DMA pool handler\n driver core: bus_add_driver should return an error if no bus\n debugfs: Add debugfs_create_u64()\n the overdue removal of the mount/umount uevents\n kobject: Comment and warning fixes to kobject.c\n Driver core: warn when userspace writes to the uevent file in a non-supported way\n Driver core: make uevent-environment available in uevent-file\n kobject core: remove rwsem from struct subsystem\n qeth: Remove usage of subsys.rwsem\n PHY: remove rwsem use from phy core\n IEEE1394: remove rwsem use from ieee1394 core\n ...\n" }, { "commit": "6816b1991fd4bcb457c9534e8136476e45bfee0a", "tree": "eb705ee8377db005524ac4c6c78134cb7b7652b0", "parents": [ "3700a90f05f316948328e8d0e6a9955338a96565" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Sun Mar 11 10:54:11 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Apr 27 15:44:34 2007 -0300" }, "message": "V4L/DVB (5419): Add comment how the speed field is interpreted.\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "3700a90f05f316948328e8d0e6a9955338a96565", "tree": "157bf9985dcb85d2d921bc080e585ec3449e50e7", "parents": [ "f40a29168475d64d854ef16a9263b24b0b2a9c6e" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Sun Mar 11 10:50:03 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Apr 27 15:44:33 2007 -0300" }, "message": "V4L/DVB (5418): Speed is a signed 32-bit integer, not unsigned.\n\nNegative speed values have to be allowed for reverse playback.\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "43d0dfcfc654fa18b6dd91b9483273b44112997f", "tree": "d61e2405bac19c16e76021d4027935785edb0ca7", "parents": [ "5332bdbe9aae9e1a8fc5daaca6c75f05bc37d310" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Sat Mar 10 06:24:30 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Apr 27 15:44:23 2007 -0300" }, "message": "V4L/DVB (5402): Add vsync_field to the union in video_event for VIDEO_EVENT_VSYNC\n\nVIDEO_EVENT_VSYNC needs to tell the application which field it was that\nreceived a VSYNC (odd/even/progressive). The vsync_field was added to the\nunion in video_event for this purpose.\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "2435be11ae1afb64ac7dfb25e10b6e3037ab0522", "tree": "14bd2585f0e2b909d4ae47556e972d876b2edabb", "parents": [ "3434eb7e14d9587ee56f3462bcfa5726b62dadb9" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Fri Apr 27 12:31:09 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Apr 27 15:43:28 2007 -0300" }, "message": "V4L/DVB (5307): Add support for the cx23415 MPEG decoding features.\n\nThe cx23415 adds some extra features that this DVB decoding API did\nnot support. This API has been expanded to support the required\nfeatures. Both source and binary backwards compatibility is kept\nintact by these changes. So existing applications are not affected.\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Ralph Metzler \u003crjkm@metzlerbros.de\u003e\nSigned-off-by: Oliver Endriss \u003co.endriss@gmx.de\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "3434eb7e14d9587ee56f3462bcfa5726b62dadb9", "tree": "49afb0915dac8e7864f89582ddbb7a6453982e2c", "parents": [ "ced80c67cd1ed503c6fb72f02ac7342ab4ebf67a" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Fri Apr 27 12:31:08 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Apr 27 15:43:27 2007 -0300" }, "message": "V4L/DVB (5306): Add support for VIDIOC_G_CHIP_IDENT\n\nVIDIOC_G_CHIP_IDENT improves debugging of card problems: it can be\nused to detect which chips are on the board and based on that information\nselected register dumps can be made, making it easy to debug complicated\nmedia chips containing tens or hundreds of registers.\nThis ioctl replaces the internal VIDIOC_INT_G_CHIP_IDENT ioctl.\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "b2787845fb91da18ebb079dc9297f92d990e9fe1", "tree": "c6e9ad31158f2679c8ea384dd068ff4051db1358", "parents": [ "3bfb7398e2554fb54acb2900b81de144eb41c3ac" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Fri Apr 27 12:31:02 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Apr 27 15:43:21 2007 -0300" }, "message": "V4L/DVB (5289): Add support for video output overlays.\n\nAdd V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY support.\nAlso add support for local and global alpha overlays.\nAdd new field enums V4L2_FIELD_INTERLACED_TB and V4L2_FIELD_INTERLACED_BT.\nThese changes are needed to support the ivtv On Screen Display features.\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "206ebaf32795cf1582b1e2ff2ec6a560c9e986b8", "tree": "9c4d72fdf06eb4eb07bbda40e3aca797ac48a790", "parents": [ "5eee72e88416ef11f55791626440ac3c9018c4c0" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Fri Apr 27 12:31:01 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Apr 27 15:43:19 2007 -0300" }, "message": "V4L/DVB (5272): Add V4L2_CAP_VIDEO_OUTPUT_POS capability\n\nAdd V4L2_CAP_VIDEO_OUTPUT_POS capability and x, y position coordinates\nto struct v4l2_pix_format.\nThis is needed to support positioning the MPEG/YUV output of the cx23415.\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "5eee72e88416ef11f55791626440ac3c9018c4c0", "tree": "0d4f7a69f2ec75c95a459d5ef6ab461e6750910a", "parents": [ "b7eee616ad8db5db5441a7d82083003df3ab6d3b" ], "author": { "name": "Hans Verkuil", "email": "hverkuil@xs4all.nl", "time": "Fri Apr 27 12:31:00 2007 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@infradead.org", "time": "Fri Apr 27 15:43:18 2007 -0300" }, "message": "V4L/DVB (5268): Add support for three new MPEG controls.\n\nAdded V4L2_CID_MPEG_AUDIO_MUTE, V4L2_CID_MPEG_VIDEO_MUTE and\nV4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS controls together with\ntheir implementation in the cx2341x module.\n\nSigned-off-by: Hans Verkuil \u003chverkuil@xs4all.nl\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\n" }, { "commit": "d1da4e50e5d09f02c340927a4fcb7f54202fa033", "tree": "7f98317bdd45dbdb7644e9179891c5af6a3a8ef1", "parents": [ "78ab67da1002d954ea4c3e2b441e2483c41f94e8", "a205752d1ad2d37d6597aaae5a56fc396a770868" ], "author": { "name": "David Woodhouse", "email": "dwmw2@infradead.org", "time": "Fri Apr 27 19:16:19 2007 +0100" }, "committer": { "name": "David Woodhouse", "email": "dwmw2@infradead.org", "time": "Fri Apr 27 19:16:19 2007 +0100" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6\n\nConflicts:\n\n\tdrivers/mtd/Kconfig\n\nSigned-off-by: David Woodhouse \u003cdwmw2@infradead.org\u003e\n" }, { "commit": "404d5b185b4eb56d6fa2f7bd27833f8df1c38ce4", "tree": "1130df0503191529ee7088ccf3868d3be81ebc2d", "parents": [ "61a2f59af6c8ffd9d6dd53f0da32563d4434e790" ], "author": { "name": "Dan Williams", "email": "dan.j.williams@intel.com", "time": "Thu Apr 26 00:12:10 2007 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Apr 27 10:57:34 2007 -0700" }, "message": "dev_dbg: check dev_dbg() arguments\n\nDuplicate what Zach Brown did for pr_debug in commit\n8b2a1fd1b394c60eaa2587716102dd5e9b4e5990\n\n[akpm@linux-foundation.org: fix a couple of things which broke]\nSigned-off-by: Dan Williams \u003cdan.j.williams@intel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "a53c46dc8253cc613ad66a2ca7aad6de8b7e61b9", "tree": "5b041cbe147597efb337525ad8260128cc8bc2b0", "parents": [ "075c1771526c85849ed22298d048bc07e400aee5" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Apr 26 11:43:58 2007 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Apr 27 10:57:33 2007 -0700" }, "message": "s2ram: add arch irq disable/enable hooks\n\nAfter some more discussion this patch replaces it:\n\nFrom: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSubject: suspend: add arch irq disable/enable hooks\n\nFor powermac, we need to do some things between suspending devices and\ndevice_power_off, for example setting the decrementer. This patch\nallows architectures to define arch_s2ram_{en,dis}able_irqs in their\nasm/suspend.h to have control over this step.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nAcked-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n\n" }, { "commit": "075c1771526c85849ed22298d048bc07e400aee5", "tree": "a1579e93b450b0e870a7a65698f9a07bddbfd899", "parents": [ "057f6c019fff9ee290641d50647359bb8898918e" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Thu Apr 26 00:12:06 2007 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Apr 27 10:57:33 2007 -0700" }, "message": "define platform wakeup hook, use in pci_enable_wake()\n\nThis defines a platform hook to enable/disable a device as a wakeup event\nsource. It\u0027s initially for use with ACPI, but more generally it could be used\nwhenever enable_irq_wake()/disable_irq_wake() don\u0027t suffice.\n\nThe hook is called -- if available -- inside pci_enable_wake(); and the\nsemantics of that call are enhanced so that support for PCI PME# is no longer\nneeded. It can now work for devices with \"legacy PCI PM\", when platform\nsupport allows it. (That support would use some board-specific signal for for\nthe same purpose as PME#.)\n\n[akpm@linux-foundation.org: Make it compile with CONFIG_PM\u003dn]\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nSigned-off-by: Zhang Rui \u003crui.zhang@intel.com\u003e\nCc: Len Brown \u003clenb@kernel.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "057f6c019fff9ee290641d50647359bb8898918e", "tree": "c051a915e2038825dd2f50f24fc28abb3c4a5e79", "parents": [ "523ded71de0c5e66973335bf99a80edfda9f401b" ], "author": { "name": "James Morris", "email": "jmorris@namei.org", "time": "Thu Apr 26 00:12:05 2007 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Apr 27 10:57:33 2007 -0700" }, "message": "security: prevent permission checking of file removal via sysfs_remove_group()\n\nPrevent permission checking from being performed when the kernel wants to\nunconditionally remove a sysfs group, by introducing an kernel-only variant\nof lookup_one_len(), lookup_one_len_kern().\n\nAdditionally, as sysfs_remove_group() does not check the return value of\nthe lookup before using it, a BUG_ON has been added to pinpoint the cause\nof any problems potentially caused by this (and as a form of annotation).\n\nSigned-off-by: James Morris \u003cjmorris@namei.org\u003e\nCc: Nagendra Singh Tomar \u003cnagendra_tomar@adaptec.com\u003e\nCc: Tejun Heo \u003chtejun@gmail.com\u003e\nCc: Stephen Smalley \u003csds@tycho.nsa.gov\u003e\nCc: Eric Paris \u003ceparis@redhat.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "523ded71de0c5e66973335bf99a80edfda9f401b", "tree": "20f47e8ed91018977d9fb7f4169a6ef8db407b82", "parents": [ "fa1a8c23eb7d3ded8a3c6d0e653339a2bc7fca9e" ], "author": { "name": "Alan Stern", "email": "stern@rowland.harvard.edu", "time": "Thu Apr 26 00:12:04 2007 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Apr 27 10:57:32 2007 -0700" }, "message": "device_schedule_callback() needs a module reference\n\nThis patch (as896b) fixes an oversight in the design of\ndevice_schedule_callback(). It is necessary to acquire a reference to the\nmodule owning the callback routine, to prevent the module from being\nunloaded before the callback can run.\n\nSigned-off-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nCc: Satyam Sharma \u003csatyam.sharma@gmail.com\u003e\nCc: Neil Brown \u003cneilb@suse.de\u003e\nCc: Cornelia Huck \u003ccornelia.huck@de.ibm.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "8447891fe845851738439788c74b3c811578e3f9", "tree": "05834fbe797aa03a3db58dbc69e613a6afcd1a93", "parents": [ "3106d46f51a1a72fdbf071ebc0800a9bcfcbc544" ], "author": { "name": "Michael Ellerman", "email": "michael@ellerman.id.au", "time": "Tue Apr 17 15:59:36 2007 +1000" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Apr 27 10:57:31 2007 -0700" }, "message": "debugfs: Add debugfs_create_u64()\n\nI went to use this the other day, only to find it didn\u0027t exist.\n\nIt\u0027s a straight copy of the debugfs u32 code, then s/u32/u64/. A quick\ntest shows it seems to be working.\n\nSigned-off-by: Michael Ellerman \u003cmichael@ellerman.id.au\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "3106d46f51a1a72fdbf071ebc0800a9bcfcbc544", "tree": "bd2045da6a476e942b1bbb004c3065124e856464", "parents": [ "2753133eb3321feb81dcb9c88141dd2aa5973ee1" ], "author": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Fri Apr 06 12:21:45 2007 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Apr 27 10:57:31 2007 -0700" }, "message": "the overdue removal of the mount/umount uevents\n\nThis patch contains the overdue removal of the mount/umount uevents.\n\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "4628803062d93dadc6ba8e801fd075526904a38c", "tree": "df7081e3f18899c35873b647a582be655b1a5ed1", "parents": [ "2f66858a0ae48faf4c8dc19042f3aff52208dc57" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Mon Apr 09 11:52:31 2007 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Apr 27 10:57:31 2007 -0700" }, "message": "kobject core: remove rwsem from struct subsystem\n\nIt isn\u0027t used at all by the driver core anymore, and the few usages of\nit within the kernel have now all been fixed as most of them were using\nit incorrectly. So remove it.\n\nNow the whole struct subsys can be removed from the system, but that\u0027s\nfor a later patch...\n\nCc: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "f89cbc399ecd924c4bd879344e662aace2274b4f", "tree": "d44c6c9952e1433566a3e6a4eb0123e33d10d97d", "parents": [ "bf62456eb91f3d2ef0736081583d09b0b3c8b7ea" ], "author": { "name": "Dmitry Torokhov", "email": "dtor@insightbb.com", "time": "Tue Apr 03 01:08:40 2007 -0400" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Apr 27 10:57:29 2007 -0700" }, "message": "Driver core: add suspend() and resume() to struct device_type\n\nDriver core: add suspend() and resume() to struct device_type\n\nIn cases when there are devices of different types in the same class\nwe can\u0027t use class\u0027s implementation of suspend and resume methods and\nwe need to add them to struct device_type instead.\n\nAlso fix error handling in resume code (we should not try to call\nclass\u0027s resume method iof bus\u0027s resume method for the device failed.\n\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "74e9f5fa1570f956c96dd5d3f1053daedbbf01a0", "tree": "095bfed9efced3538507d16eb93010d91c074f5f", "parents": [ "c6a46696f97ff260a4ecce5e287f8de4b9d7fe14" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Tue Apr 09 12:14:34 2002 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Apr 27 10:57:29 2007 -0700" }, "message": "Driver core: remove unneeded completion from driver release path\n\nThe completion in the driver release path is due to ancient history in\nthe _very_ early 2.5 days when we were not tracking the module reference\ncount of attributes. It is not needed at all and can be removed.\n\nNote, we now have an empty release function for the driver structure.\nThis is due to the fact that drivers are statically allocated in the\nsystem at this point in time, something which I want to change in the\nfuture. But remember, drivers are really code, which is reference\ncounted by the module, unlike devices, which are data and _must_ be\nreference counted properly in order to work correctly.\n\n\nCc: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n\n" }, { "commit": "21c7f30b1d3f8a3de3128478daca3ce203fc8733", "tree": "ff84247ba68f82906182a214273dd330c6d1970f", "parents": [ "460f7e9a1bde2c74f060f7ce0a308dab4be6a56b" ], "author": { "name": "Cornelia Huck", "email": "cornelia.huck@de.ibm.com", "time": "Mon Feb 05 16:15:25 2007 -0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Apr 27 10:57:28 2007 -0700" }, "message": "driver core: per-subsystem multithreaded probing\n\nMake multithreaded probing work per subsystem instead of per driver.\n\nIt doesn\u0027t make much sense to probe the same device for multiple drivers in\nparallel (after all, only one driver can bind to the device). Instead, create\na probing thread for each device that probes the drivers one after another. \nAlso make the decision to use multi-threaded probe per bus instead of per\ndevice and adapt the pci code.\n\nSigned-off-by: Cornelia Huck \u003ccornelia.huck@de.ibm.com\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "414264f959cf46f49f974b3510400e12ac3624a6", "tree": "ead43994761620cbf7cb22525610627786562098", "parents": [ "621a1672f7377e08a942f205d6742d8af1292aab" ], "author": { "name": "Kay Sievers", "email": "kay.sievers@vrfy.org", "time": "Mon Mar 12 21:08:57 2007 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Apr 27 10:57:28 2007 -0700" }, "message": "Driver core: add name to device_type\n\nIf \"name\" of a device_type is specified, the uevent will\ncontain the device_type name in the DEVTYPE variable.\nThis helps userspace to distingiush between different types\nof devices, belonging to the same subsystem.\n\nSigned-off-by: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "621a1672f7377e08a942f205d6742d8af1292aab", "tree": "9249308b3df0675f713058e3f5ac0442ce2a5e1e", "parents": [ "b8c5cec23d5c33b767a1cddebd4f8813a9563e3c" ], "author": { "name": "Dmitry Torokhov", "email": "dtor@insightbb.com", "time": "Sat Mar 10 01:37:34 2007 -0500" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Apr 27 10:57:28 2007 -0700" }, "message": "driver core: Use attribute groups in struct device_type\n\nDriver core: use attribute groups in struct device_type\n\nAttribute groups are more flexible than attribute lists\n(an attribute list can be represented by anonymous group)\nso switch struct device_type to use them.\n\nAlso rework attribute creation for devices so that they all\ncleaned up properly in case of errors.\n\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\nCc: Kay Sievers \u003ckay.sievers@novell.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "b8c5cec23d5c33b767a1cddebd4f8813a9563e3c", "tree": "cffec2c5df58866aa6e7ed5540c2718a166c3246", "parents": [ "a456b7023e0abf80bb03b0bdf5471b48878e5c49" ], "author": { "name": "Kay Sievers", "email": "kay.sievers@vrfy.org", "time": "Fri Feb 16 17:33:36 2007 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Apr 27 10:57:28 2007 -0700" }, "message": "Driver core: udev triggered device-\u003c\u003edriver binding\n\nWe get two per-bus sysfs files:\n ls-l /sys/subsystem/usb\n drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices\n drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers\n -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe\n --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe\n\nThe flag \"drivers_autoprobe\" controls the behavior of the bus to bind\ndevices by default, or just initialize the device and leave it alone.\n\nThe command \"drivers_probe\" accepts a bus_id and the bus tries to bind a\ndriver to this device.\n\nSystems who want to control the driver binding with udev, switch off the\nbus initiated probing:\n echo 0 \u003e /sys/subsystem/usb/drivers_autoprobe\n echo 0 \u003e /sys/subsystem/pcmcia/drivers_autoprobe\n ...\n\nand initiate the probing with udev rules like:\n ACTION\u003d\u003d\"add\", SUBSYSTEM\u003d\u003d\"usb\", ATTR{subsystem/drivers_probe}\u003d\"$kernel\"\n ACTION\u003d\u003d\"add\", SUBSYSTEM\u003d\u003d\"pcmcia\", ATTR{subsystem/drivers_probe}\u003d\"$kernel\"\n ...\n\nCustom driver binding can happen in earlier rules by something like:\n ACTION\u003d\u003d\"add\", SUBSYSTEM\u003d\u003d\"usb\", \\\n ATTRS{idVendor}\u003d\u003d\"1234\", ATTRS{idProduct}\u003d\u003d\"5678\" \\\n ATTR{subsystem/drivers/\u003ccustom-driver\u003e/bind}\u003d\"$kernel\"\n\nThis is intended to solve the modprobe.conf mess with \"install-rules\", custom\nbind/unbind-scripts and all the weird things people invented over the years.\nIt should also provide the functionality \"libusual\" was supposed to do.\n\nWith udev, one can just write a udev rule to drive all USB-disks at the\nthird port of USB-hub by the \"ub\" driver, and everything else by\nusb-storage. One can also instruct udev to bind different wireless\ndrivers to identical cards - just selected by the pcmcia slot-number, and\nwhatever ...\n\nTo use the mentioned rules, it needs udev version 106, to be able to\nwrite ATTR{}\u003d\"$kernel\" to sysfs files.\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "864062457a2e444227bd368ca5f2a2b740de604f", "tree": "38e516852ee9825b5ffe0b1f2e8abea0a88b1674", "parents": [ "00ed8e3dda47f8421b11da17e353d7db8c878121" ], "author": { "name": "Kay Sievers", "email": "kay.sievers@vrfy.org", "time": "Wed Mar 14 03:25:56 2007 +0100" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Apr 27 10:57:28 2007 -0700" }, "message": "driver core: fix namespace issue with devices assigned to classes\n\n - uses a kset in \"struct class\" to keep track of all directories\n belonging to this class\n - merges with the /sys/devices/virtual logic.\n - removes the namespace-dir if the last member of that class\n leaves the directory.\n\nThere may be locking or refcounting fixes left, I stopped when it seemed\nto work with network and sound modules. :)\n\nFrom: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "39bc89fd4019b164002adaacef92c4140e37955a", "tree": "34ff87b8d8c2984af2015dd8c01177df88815214", "parents": [ "20f09390b2da2432309afe8aaa0bd64ec64c4584" ], "author": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Wed Apr 25 20:50:03 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Apr 27 10:46:51 2007 -0700" }, "message": "make SysRq-T show all tasks again\n\nshow_state() (SysRq-T) developed the buggy habbit of not showing\nTASK_RUNNING tasks. This was due to the mistaken belief that state_filter\n\u003d\u003d -1 would be a pass-through filter - while in reality it did not let\nTASK_RUNNING \u003d\u003d 0 p-\u003estate values through.\n\nFix this by restoring the original \u0027!state_filter means all tasks\u0027\nspecial-case i had in the original version. Test-built and test-booted on\ni686, SysRq-T now works as intended.\n\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "20f09390b2da2432309afe8aaa0bd64ec64c4584", "tree": "07882e28d0c4d92af141c2fe76491609891b566f", "parents": [ "b928ed56182b8ea59bd43f2d5b865f13a54d5719" ], "author": { "name": "Daniel Walker", "email": "dwalker@mvista.com", "time": "Thu Apr 26 09:46:05 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Apr 27 10:44:42 2007 -0700" }, "message": "seqlocks: trivial remove weird whitespace\n\nSigned-off-by: Daniel Walker \u003cdwalker@mvista.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "b928ed56182b8ea59bd43f2d5b865f13a54d5719", "tree": "e9ba0ff9d316bdb84d6f2718d4543fd4213ba061", "parents": [ "ea6db58f3ea55f413c882095d2afaea8137f4f8c", "d468a030026017008286919aa6127b1190efb2c2" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Apr 27 10:42:35 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Apr 27 10:42:35 2007 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.infradead.org/ubi-2.6\n\n* \u0027for-linus\u0027 of git://git.infradead.org/ubi-2.6:\n UBI: remove unused variable\n UBI: add me to MAINTAINERS\n JFFS2: add UBI support\n UBI: Unsorted Block Images\n" }, { "commit": "ea6db58f3ea55f413c882095d2afaea8137f4f8c", "tree": "9f7509b5dfe0fdd422b3e2b3a98ed8321d796c66", "parents": [ "c58b8e4a25a1ba347a0e5d21984c97bd296f1691", "83418978827324918a8cd25ce5227312de1d4468" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Apr 27 10:29:56 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Apr 27 10:29:56 2007 -0700" }, "message": "Merge branch \u0027upstream-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2\n\n* \u0027upstream-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (27 commits)\n ocfs2: Cache extent records\n ocfs2: Remember rw lock level during direct io\n ocfs2: Fix up i_blocks calculation to know about holes\n ocfs2: Fix extent lookup to return true size of holes\n ocfs2: Read from an unwritten extent returns zeros\n ocfs2: make room for unwritten extents flag\n ocfs2: Use own splice write actor\n ocfs2: Use do_sync_mapping_range() in ocfs2_zero_tail_for_truncate()\n [PATCH] Turn do_sync_file_range() into do_sync_mapping_range()\n ocfs2: zero tail of sparse files on truncate\n ocfs2: Teach ocfs2_get_block() about holes\n ocfs2: remove ocfs2_prepare_write() and ocfs2_commit_write()\n ocfs2: teach ocfs2_file_aio_write() about sparse files\n ocfs2: Turn off shared writeable mmap for local files systems with holes.\n ocfs2: abstract out allocation locking\n ocfs2: teach extend/truncate about sparse files\n ocfs2: temporarily remove extent map caching\n ocfs2: sparse b-tree support\n ocfs2: small cleanup of ocfs2_request_delete()\n ocfs2: remove unused code\n ...\n" }, { "commit": "0278ef8b484a71917bd4f03a763285cdaac10954", "tree": "8f6f7bf2e2a85b4643dfe3d0475811ce858fb4fc", "parents": [ "15c54033964a943de7b0763efd3bd0ede7326395", "cd9ad58d4061494e7fdd70ded7bcf2418daf356a" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Apr 27 09:29:04 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Apr 27 09:29:04 2007 -0700" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6\n\n* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (67 commits)\n [SCSI] SUNESP: Complete driver rewrite to version 2.0\n [SPARC64]: Convert PCI over to generic struct iommu/strbuf.\n [SPARC]: device_node name constification fallout\n [SPARC64]: Convert SBUS over to generic iommu/strbuf structs.\n [SPARC64]: Add generic iommu and strbuf structs to iommu.h\n [SPARC64]: Consolidate {sbus,pci}_iommu_arena.\n [SPARC]: Make device_node name and type const\n [SPARC64]: constify some paramaters of OF routines\n [TIGON3]: of_get_property() returns const.\n [SPARC64]: Fix PCI rework to adhere to of_get_property() const return.\n [SPARC64]: Document and fix calculation of pages_avail.\n [SPARC64]: Make sure pbm-\u003eprom_node is setup easly enough in psycho.c\n [SPARC64]: Use bootmem_bootmap_pages() in choose_bootmap_pfn().\n [SPARC64]: Add proper header file extern for cmdline_memory_size.\n [SPARC64]: Kill sparc_ultra_dump_{i,d}tlb()\n [SPARC64]: Use DECLARE_BITMAP and BITS_TO_LONGS in mm/init.c\n [SPARC64]: Give move verbose show_mem() output just like i386.\n [SPARC64]: Mark show_mem() printk\u0027s with KERN_INFO.\n [SPARC64]: Kill kvaddr_to_phys() and friends.\n [SPARC64]: Privatize sun4u_get_pte() and fix name.\n ...\n" }, { "commit": "15c54033964a943de7b0763efd3bd0ede7326395", "tree": "840b292612d1b5396d5bab5bde537a9013db3ceb", "parents": [ "ad5da3cf39a5b11a198929be1f2644e17ecd767e", "912a41a4ab935ce8c4308428ec13fc7f8b1f18f4" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Apr 27 09:26:46 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Apr 27 09:26:46 2007 -0700" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\n* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (448 commits)\n [IPV4] nl_fib_lookup: Initialise res.r before fib_res_put(\u0026res)\n [IPV6]: Fix thinko in ipv6_rthdr_rcv() changes.\n [IPV4]: Add multipath cached to feature-removal-schedule.txt\n [WIRELESS] cfg80211: Clarify locking comment.\n [WIRELESS] cfg80211: Fix locking in wiphy_new.\n [WEXT] net_device: Don\u0027t include wext bits if not required.\n [WEXT]: Misc code cleanups.\n [WEXT]: Reduce inline abuse.\n [WEXT]: Move EXPORT_SYMBOL statements where they belong.\n [WEXT]: Cleanup early ioctl call path.\n [WEXT]: Remove options.\n [WEXT]: Remove dead debug code.\n [WEXT]: Clean up how wext is called.\n [WEXT]: Move to net/wireless\n [AFS]: Eliminate cmpxchg() usage in vlocation code.\n [RXRPC]: Fix pointers passed to bitops.\n [RXRPC]: Remove bogus atomic_* overrides.\n [AFS]: Fix u64 printing in debug logging.\n [AFS]: Add \"directory write\" support.\n [AFS]: Implement the CB.InitCallBackState3 operation.\n ...\n" }, { "commit": "6c210482ae4a9a5bb9377ad250feaacec3faa3cd", "tree": "2eb89d89a22380298d64edad59010c1d0a59e5a4", "parents": [ "2fc2d1e9ffcde78af7ab63ed640d9a4901797de2" ], "author": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Fri Apr 27 16:01:57 2007 +0200" }, "committer": { "name": "Martin Schwidefsky", "email": "schwidefsky@de.ibm.com", "time": "Fri Apr 27 16:01:46 2007 +0200" }, "message": "[S390] split page_test_and_clear_dirty.\n\nThe page_test_and_clear_dirty primitive really consists of two\noperations, page_test_dirty and the page_clear_dirty. The combination\nof the two is not an atomic operation, so it makes more sense to have\ntwo separate operations instead of one.\nIn addition to the improved readability of the s390 version of\nSetPageUptodate, it now avoids the page_test_dirty operation which is\nan insert-storage-key-extended (iske) instruction which is an expensive\noperation.\n\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\n" }, { "commit": "801c135ce73d5df1caf3eca35b66a10824ae0707", "tree": "eaf6e7859650557192533b70746479de686c56e1", "parents": [ "de46c33745f5e2ad594c72f2cf5f490861b16ce1" ], "author": { "name": "Artem B. Bityutskiy", "email": "dedekind@linutronix.de", "time": "Tue Jun 27 12:22:22 2006 +0400" }, "committer": { "name": "Frank Haverkamp", "email": "haver@vnet.ibm.com", "time": "Fri Apr 27 14:23:33 2007 +0300" }, "message": "UBI: Unsorted Block Images\n\nUBI (Latin: \"where?\") manages multiple logical volumes on a single\nflash device, specifically supporting NAND flash devices. UBI provides\na flexible partitioning concept which still allows for wear-levelling\nacross the whole flash device.\n\nIn a sense, UBI may be compared to the Logical Volume Manager\n(LVM). Whereas LVM maps logical sector numbers to physical HDD sector\nnumbers, UBI maps logical eraseblocks to physical eraseblocks.\n\nMore information may be found at\nhttp://www.linux-mtd.infradead.org/doc/ubi.html\n\nPartitioning/Re-partitioning\n\n An UBI volume occupies a certain number of erase blocks. This is\n limited by a configured maximum volume size, which could also be\n viewed as the partition size. Each individual UBI volume\u0027s size can\n be changed independently of the other UBI volumes, provided that the\n sum of all volume sizes doesn\u0027t exceed a certain limit.\n\n UBI supports dynamic volumes and static volumes. Static volumes are\n read-only and their contents are protected by CRC check sums.\n\nBad eraseblocks handling\n\n UBI transparently handles bad eraseblocks. When a physical\n eraseblock becomes bad, it is substituted by a good physical\n eraseblock, and the user does not even notice this.\n\nScrubbing\n\n On a NAND flash bit flips can occur on any write operation,\n sometimes also on read. If bit flips persist on the device, at first\n they can still be corrected by ECC, but once they accumulate,\n correction will become impossible. Thus it is best to actively scrub\n the affected eraseblock, by first copying it to a free eraseblock\n and then erasing the original. The UBI layer performs this type of\n scrubbing under the covers, transparently to the UBI volume users.\n\nErase Counts\n\n UBI maintains an erase count header per eraseblock. This frees\n higher-level layers (like file systems) from doing this and allows\n for centralized erase count management instead. The erase counts are\n used by the wear-levelling algorithm in the UBI layer. The algorithm\n itself is exchangeable.\n\nBooting from NAND\n\n For booting directly from NAND flash the hardware must at least be\n capable of fetching and executing a small portion of the NAND\n flash. Some NAND flash controllers have this kind of support. They\n usually limit the window to a few kilobytes in erase block 0. This\n \"initial program loader\" (IPL) must then contain sufficient logic to\n load and execute the next boot phase.\n\n Due to bad eraseblocks, which may be randomly scattered over the\n flash device, it is problematic to store the \"secondary program\n loader\" (SPL) statically. Also, due to bit-flips it may become\n corrupted over time. UBI allows to solve this problem gracefully by\n storing the SPL in a small static UBI volume.\n\nUBI volumes vs. static partitions\n\n UBI volumes are still very similar to static MTD partitions:\n\n * both consist of eraseblocks (logical eraseblocks in case of UBI\n volumes, and physical eraseblocks in case of static partitions;\n * both support three basic operations - read, write, erase.\n\n But UBI volumes have the following advantages over traditional\n static MTD partitions:\n\n * there are no eraseblock wear-leveling constraints in case of UBI\n volumes, so the user should not care about this;\n * there are no bit-flips and bad eraseblocks in case of UBI volumes.\n\n So, UBI volumes may be considered as flash devices with relaxed\n restrictions.\n\nWhere can it be found?\n\n Documentation, kernel code and applications can be found in the MTD\n gits.\n\nWhat are the applications for?\n\n The applications help to create binary flash images for two purposes: pfi\n files (partial flash images) for in-system update of UBI volumes, and plain\n binary images, with or without OOB data in case of NAND, for a manufacturing\n step. Furthermore some tools are/and will be created that allow flash content\n analysis after a system has crashed..\n\nWho did UBI?\n\n The original ideas, where UBI is based on, were developed by Andreas\n Arnez, Frank Haverkamp and Thomas Gleixner. Josh W. Boyer and some others\n were involved too. The implementation of the kernel layer was done by Artem\n B. Bityutskiy. The user-space applications and tools were written by Oliver\n Lohmann with contributions from Frank Haverkamp, Andreas Arnez, and Artem.\n Joern Engel contributed a patch which modifies JFFS2 so that it can be run on\n a UBI volume. Thomas Gleixner did modifications to the NAND layer. Alexander\n Schmidt made some testing work as well as core functionality improvements.\n\nSigned-off-by: Artem B. Bityutskiy \u003cdedekind@linutronix.de\u003e\nSigned-off-by: Frank Haverkamp \u003chaver@vnet.ibm.com\u003e\n" }, { "commit": "b86e0280bb5585a610783ff5392d9d439dee7ddd", "tree": "150f65cdf5fd17a41c7c2042c0f90ebc6e9f0268", "parents": [ "4d44e0dfe961e02489d40d32334454ebe0e784e8" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Apr 26 20:48:23 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 26 20:48:23 2007 -0700" }, "message": "[WEXT] net_device: Don\u0027t include wext bits if not required.\n\nThis patch makes the wext bits in struct net_device depend on\nCONFIG_WIRELESS_EXT.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "17926a79320afa9b95df6b977b40cca6d8713cea", "tree": "5cedff43b69520ad17b86783d3752053686ec99c", "parents": [ "e19dff1fdd99a25819af74cf0710e147fff4fd3a" ], "author": { "name": "David Howells", "email": "dhowells@redhat.com", "time": "Thu Apr 26 15:48:28 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 26 15:48:28 2007 -0700" }, "message": "[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both\n\nProvide AF_RXRPC sockets that can be used to talk to AFS servers, or serve\nanswers to AFS clients. KerberosIV security is fully supported. The patches\nand some example test programs can be found in:\n\n\thttp://people.redhat.com/~dhowells/rxrpc/\n\nThis will eventually replace the old implementation of kernel-only RxRPC\ncurrently resident in net/rxrpc/.\n\nSigned-off-by: David Howells \u003cdhowells@redhat.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "7318226ea2931a627f3572e5f4804c91ca19ecbc", "tree": "d2492bb7e87a9c1740432c4dcde13e75ee46ad8d", "parents": [ "071b638689464c6b39407025eedd810d5b5e6f5d" ], "author": { "name": "David Howells", "email": "dhowells@redhat.com", "time": "Thu Apr 26 15:46:23 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 26 15:46:23 2007 -0700" }, "message": "[AF_RXRPC]: Key facility changes for AF_RXRPC\n\nExport the keyring key type definition and document its availability.\n\nAdd alternative types into the key\u0027s type_data union to make it more useful.\nNot all users necessarily want to use it as a list_head (AF_RXRPC doesn\u0027t, for\nexample), so make it clear that it can be used in other ways.\n\nSigned-off-by: David Howells \u003cdhowells@redhat.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "071b638689464c6b39407025eedd810d5b5e6f5d", "tree": "702b28d1a7acdd7ea904cd442c4491a24b93c059", "parents": [ "566ec03448052c096dc3982fbe573522dc0ba479" ], "author": { "name": "Oleg Nesterov", "email": "oleg@tv-sign.ru", "time": "Thu Apr 26 15:45:32 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Apr 26 15:45:32 2007 -0700" }, "message": "[WORKQUEUE]: cancel_delayed_work: use del_timer() instead of del_timer_sync()\n\ndel_timer_sync() buys nothing for cancel_delayed_work(), but it is less\nefficient since it locks the timer unconditionally, and may wait for the\ncompletion of the delayed_work_timer_fn().\n\ncancel_delayed_work() \u003d\u003d 0 means:\n\n\tbefore this patch:\n\t\twork-\u003efunc may still be running or queued\n\n\tafter this patch:\n\t\twork-\u003efunc may still be running or queued, or\n\t\tdelayed_work_timer_fn-\u003e__queue_work() in progress.\n\n\t\tThe latter doesn\u0027t differ from the caller\u0027s POV,\n\t\tdelayed_work_timer_fn() is called with _PENDING\n\t\tbit set.\n\ncancel_delayed_work() \u003d\u003d 1 with this patch adds a new possibility:\n\n\tdelayed_work-\u003ework was cancelled, but delayed_work_timer_fn\n\tis still running (this is only possible for the re-arming\n\tworks on single-threaded workqueue).\n\n\tIn this case the timer was re-started by work-\u003efunc(), nobody\n\telse can do this. This in turn means that delayed_work_timer_fn\n\thas already passed __queue_work() (and wont\u0027t touch delayed_work)\n\tbecause nobody else can queue delayed_work-\u003ework.\n\nSigned-off-by: Oleg Nesterov \u003coleg@tv-sign.ru\u003e\nSigned-Off-By: David Howells \u003cdhowells@redhat.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" } ], "next": "5b04aa3a64f854244bc40a6f528176ed50b5c4f6" }