)]}' { "log": [ { "commit": "d352b26f74591cac89bf4d501d78efcdc88a5ca3", "tree": "c201fb9700c45952f88c7f6bbaba9b685d59042b", "parents": [ "7b754271f10beedc64d7015abc30fa38591c29c6" ], "author": { "name": "Srinivas Krovvidi", "email": "skrovvid@codeaurora.org", "time": "Thu Jan 12 19:46:26 2012 +0530" }, "committer": { "name": "Srinivas Krovvidi", "email": "skrovvid@codeaurora.org", "time": "Fri Jan 20 08:22:56 2012 +0530" }, "message": "Bluetooth: Reading remote device lmp_version from controller.\n\nOn ACL connection complete with a remote device, the remote\ndevice lmp version should be available with Controller. The\ncurrent change is to read this information from controller to\nhost and update to bluez userspace through management APIs.\n\nChange-Id: Ie152ed98fa0a6cf9ab170a6bb8c6a05b5b9dfcb0\nSigned-off-by: Srinivas Krovvidi \u003cskrovvid@codeaurora.org\u003e\n" }, { "commit": "7b754271f10beedc64d7015abc30fa38591c29c6", "tree": "e97bf2f8bf1c3100c11e2080712cca4cfe4b9361", "parents": [ "21b3a0fae9086433415f59eb769cf4774366f10f", "7c3ad69aac323ce84e3015873b0c9b18387c12d3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 17:33:48 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 17:33:48 2012 -0800" }, "message": "Merge \"vidc: Add support for video playback secure session.\" into msm-3.0" }, { "commit": "21b3a0fae9086433415f59eb769cf4774366f10f", "tree": "df7638d5437c1ede48dc82f1012800972f81b4c2", "parents": [ "87b57c9b8648fbfe7a825a3d97944a4d0253a673", "8a7a5d3982cdedc441f2da8c31846da4e0a72917" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 17:33:48 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 17:33:48 2012 -0800" }, "message": "Merge \"msm: 8064: Add fabric devices to enable bus scaling on 8064\" into msm-3.0" }, { "commit": "87b57c9b8648fbfe7a825a3d97944a4d0253a673", "tree": "99d80f9197cc15a291ca12101b32dacb139618c7", "parents": [ "7dbdcf74357a2e810e76dfd1f0ebe3cbeebeb255", "382d3ce8413ce9062cfcc0ff134e694f5ac58230" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 17:33:48 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 17:33:48 2012 -0800" }, "message": "Merge \"input: atmel_mxt_ts: Add support for keyarray object\" into msm-3.0" }, { "commit": "7dbdcf74357a2e810e76dfd1f0ebe3cbeebeb255", "tree": "cccc332b2a4455110519a610c66458442d6859ff", "parents": [ "0652ee4b0e6a61811117a2957c20dac1021129d4", "d6140eb5ef2ca2f342be568cc369a4ceeaeb9eac" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 14:59:10 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 14:59:10 2012 -0800" }, "message": "Merge \"radio: iris: Use service availability to indicate station\u0027s signal strength\" into msm-3.0" }, { "commit": "0652ee4b0e6a61811117a2957c20dac1021129d4", "tree": "b02deb67fb63e84dce866ec671de20dd3a2653b7", "parents": [ "58e5babc00a84a8bbec21aaefb8328888a03df82", "40ec7e905181bfda1133a689552b585014db4960" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 14:59:10 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 14:59:10 2012 -0800" }, "message": "Merge \"msm: 8930: Add SDC1 and SDC3 platform data\" into msm-3.0" }, { "commit": "58e5babc00a84a8bbec21aaefb8328888a03df82", "tree": "4d99e1533be9f31c4346d413d4de4164380b5aab", "parents": [ "10e435cc9b836a71dc648d5e752d1614d517ec67", "da2f3cc0003c55cd18d6f052ecb9530fe2acea9a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 14:59:10 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 14:59:10 2012 -0800" }, "message": "Merge \"msm_fb: display: perform backlight updates on overlay play\" into msm-3.0" }, { "commit": "10e435cc9b836a71dc648d5e752d1614d517ec67", "tree": "bfebc4225f781eda2f44d62f0e5fc1a2708e83bc", "parents": [ "1980cb37f5e0bf7698230b0794fe45d3495346cb", "0d81f315559540bdc8e459bf757ad96ae6b4b5e1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 13:23:10 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 13:23:10 2012 -0800" }, "message": "Merge \"USB: OTG: msm: Add PMIC VBUS notification support for peripheral only mode\" into msm-3.0" }, { "commit": "1980cb37f5e0bf7698230b0794fe45d3495346cb", "tree": "1291cc0fbeb87204310e6b5b4ca6b615b15fc8b2", "parents": [ "0f7e3d058749efd3d875d3dffe77f793eec85720", "7355db013022a7db136dfef700a7f32d039a8bcb" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 13:23:10 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 13:23:10 2012 -0800" }, "message": "Merge changes Icc844d30,I527768f0,If1cd6dda,I8cc87d5a into msm-3.0\n\n* changes:\n msm: board: Add ION heap for Audio\n msm: board: Increase ION MM heap size\n msm: board: Restore SF and MM heap to PMEM sizes\n gpu: ion: Add new heap for qse comm\n" }, { "commit": "0f7e3d058749efd3d875d3dffe77f793eec85720", "tree": "035716b6de5f69d7797491a472c765cd2860265c", "parents": [ "0c80c1a1ebd7efea39e97b52c94b6fa40a4798b8", "64b43261ea6ec6c584f0a620c60adc55e7f878c4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 13:23:10 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 13:23:10 2012 -0800" }, "message": "Merge \"ASoC: WCD9310: Read MBHC Firmware data for calibration\" into msm-3.0" }, { "commit": "7c3ad69aac323ce84e3015873b0c9b18387c12d3", "tree": "ead13da3223961cc949623be51401672b1256618", "parents": [ "0c80c1a1ebd7efea39e97b52c94b6fa40a4798b8" ], "author": { "name": "Rajeshwar Kurapaty", "email": "rkurapat@codeaurora.org", "time": "Thu Jan 19 13:10:57 2012 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 13:01:31 2012 -0700" }, "message": "vidc: Add support for video playback secure session.\n\nWhen video driver is opened in secure mode, buffers\nare allocated from secure heap.\n\nChange-Id: I813c52e65b88cc302d8f4d27fc7c5f13a6fa77a8\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\nSigned-off-by: Deva Ramasubramanian \u003cdramasub@codeaurora.org\u003e\nSigned-off-by: Rajeshwar Kurapaty \u003crkurapat@codeaurora.org\u003e\n" }, { "commit": "0c80c1a1ebd7efea39e97b52c94b6fa40a4798b8", "tree": "19ea5ac07f8d8b3383813b88b89131543c74dfb1", "parents": [ "adbdf7f3750d980d1b0aa25c64ce01c1a4959176", "a966f45fa4714e371403a38e92724815c66ac3cd" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 11:52:58 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 11:52:58 2012 -0800" }, "message": "Merge \"ASoC: msm: Reduce the minimum period size for compress audio\" into msm-3.0" }, { "commit": "adbdf7f3750d980d1b0aa25c64ce01c1a4959176", "tree": "299b7a3a8003f8e4eeaa3b7a0bdb4e510f24891f", "parents": [ "51e08eab2095409d3c380d808f140a0a1a54fedb", "964f1c9b9ff88a05f8da5b15aabb5ddd9cdfe9cc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 11:52:58 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 11:52:58 2012 -0800" }, "message": "Merge \"net: usb: Set skb protocol based on RMNET Link Layer Protocol Mode\" into msm-3.0" }, { "commit": "51e08eab2095409d3c380d808f140a0a1a54fedb", "tree": "a5b4f54d0270b1450478b5471e50dabdb591a2d9", "parents": [ "32a110abcebdcc0d319330951440f5d651c19385", "69425ffb7f4c483ed368f39aa4957132fd97c181" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 11:52:58 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 11:52:58 2012 -0800" }, "message": "Merge \"ARM: 6993/1: platsmp: Allow secondary cpu hotplug with maxcpus\u003d1\" into msm-3.0" }, { "commit": "32a110abcebdcc0d319330951440f5d651c19385", "tree": "49f90436bc29b1c6391c235fd9b4d0657c519e9c", "parents": [ "669649a990036b48790eeb3d0b3f7d5f42a96550", "506cfe7691c7e88642dc964cff1712e62bfcba1b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 11:52:58 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 11:52:58 2012 -0800" }, "message": "Merge changes Iab2aff3d,I5ff76c3a into msm-3.0\n\n* changes:\n of/irq: of_irq_init: add check for parent equal to child node\n of/irq: introduce of_irq_init\n" }, { "commit": "669649a990036b48790eeb3d0b3f7d5f42a96550", "tree": "af57397c3a4537e0b7f185cedb6685e18327a9f5", "parents": [ "dc9635e3fe4e99b56e5d6be8899ba5385141eb7f", "ca82bd65223f61c193fd2600479bd18c09f7b1dc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 11:52:58 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 11:52:58 2012 -0800" }, "message": "Merge \"msm_fb: hdmi: Correct logical clock rate for 480p\" into msm-3.0" }, { "commit": "dc9635e3fe4e99b56e5d6be8899ba5385141eb7f", "tree": "bafaae501a57a2afd58b2958672be206ff8870c2", "parents": [ "a418bc2385c23e28e1e1e33c84a382dc36cb2b23", "4ebfc3ff2e69deb60402095a47e35df20ed62136" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 11:52:58 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 11:52:58 2012 -0800" }, "message": "Merge \"clk: add config option HAVE_CLK_PREPARE into Kconfig\" into msm-3.0" }, { "commit": "a418bc2385c23e28e1e1e33c84a382dc36cb2b23", "tree": "1b7aba961daf53ecc4d7825d7e54001de1af9612", "parents": [ "949f2c999c468f4c3c6b92fcdef71879fe1af652", "cc5d20d1c1c52cb69fc4bae5bb626fd76bfe730e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 11:52:58 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 11:52:58 2012 -0800" }, "message": "Merge \"vidc: Map firmware buffers after memory clocks are ON.\" into msm-3.0" }, { "commit": "949f2c999c468f4c3c6b92fcdef71879fe1af652", "tree": "3eadc43947fbaad17f4e038c6703bd27973ca82c", "parents": [ "e52e81b7e3470889963a6b1d104ffc7107d54ab3", "d9a4173222de868e13a192ab15b88f3f7821c796" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 10:02:45 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 10:02:45 2012 -0800" }, "message": "Merge \"msm: iomap-8064: Add RPM, SAW-L2 and SAW-CPU memory map\" into msm-3.0" }, { "commit": "e52e81b7e3470889963a6b1d104ffc7107d54ab3", "tree": "6353624d4a69e2e1b674e305b9cdbe95361abd83", "parents": [ "ca6a61e107c7010ea7f719cbf853841278e6d318", "c59d62226a850caf80afc04e35d0fd060e91adf4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 10:02:45 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 10:02:45 2012 -0800" }, "message": "Merge \"vidc: Added proper check for ION handle.\" into msm-3.0" }, { "commit": "8a7a5d3982cdedc441f2da8c31846da4e0a72917", "tree": "03279c480c57ffece3c9e1662292b098f37502bf", "parents": [ "ca6a61e107c7010ea7f719cbf853841278e6d318" ], "author": { "name": "Gagan Mac", "email": "gmac@codeaurora.org", "time": "Fri Nov 11 16:43:06 2011 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 03:50:50 2012 -0700" }, "message": "msm: 8064: Add fabric devices to enable bus scaling on 8064\n\nAdd fabric devices to the kernel tree by listing them in\ninitialization data to enable bus scaling on APQ8064\n\nChange-Id: Id56fbfde410f7bd268de7111eae0752eab733d59\nSigned-off-by: Gagan Mac \u003cgmac@codeaurora.org\u003e\n" }, { "commit": "ca6a61e107c7010ea7f719cbf853841278e6d318", "tree": "90ae4cc7e34e638e537281c342d01da8eb0abf11", "parents": [ "369bafccfc73981f957f7aa3872f9b6fe37fbec0", "b0f4036c4afacdd6817acf3584d62aaf19c09202" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "message": "Merge changes I4917de40,Id64bc384,Iae5182ff into msm-3.0\n\n* changes:\n mfd: pm8038-core: enable bms and charger devices\n msm: 8930: enable charger, bms and ccadc\n mfd: pm8xxx: add charger, bms and ccadc devices on PM8038\n" }, { "commit": "369bafccfc73981f957f7aa3872f9b6fe37fbec0", "tree": "843f7e1bb39163515693f2db6911a5ca6cbe4346", "parents": [ "973454460957d083365c5821cae6bd0e36a1750b", "23a812bf0d6c8c15db273d6865eb0b07026c7502" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "message": "Merge \"msm: bam_dmux: migrate to new clock voting api\" into msm-3.0" }, { "commit": "973454460957d083365c5821cae6bd0e36a1750b", "tree": "93e62f072a8ecca74b793ce6528ff97d333d494f", "parents": [ "1ed45486895d4f8f7555a3ccc36b6d2fdf319189", "61c7719e7993a8bfa58e83294d0f6e23b7d413a1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "message": "Merge changes I1eafe532,Icea070c6 into msm-3.0\n\n* changes:\n msm: idle_stats: Detect serialized use cases.\n msm: idle_stats: Reset all idle stats events\n" }, { "commit": "1ed45486895d4f8f7555a3ccc36b6d2fdf319189", "tree": "470ffdffb9d562abfce98447335b6611b82e6eaf", "parents": [ "4b697d60d29ccd18d0a7460a5946bc5c9e345ad9", "e370f46fefeba6967cacab7cdb537c11db833a2f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "message": "Merge changes I31aa21c0,I9550c900 into msm-3.0\n\n* changes:\n msm: 7x27a: Enable idle stats device for 7x27A\n msm: Config option to enable idle stats device\n" }, { "commit": "4b697d60d29ccd18d0a7460a5946bc5c9e345ad9", "tree": "7bcff42a2985b08452861fb79a622b00942eb293", "parents": [ "eddc1d32f652bec0adca9fe97e2dc0bbc8be7916", "97b8c2235280e6de0b9ff0ef0da76fe3333b4e3a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "message": "Merge \"usb: gadget: Add proper cleanup of disabled endpoints\" into msm-3.0" }, { "commit": "eddc1d32f652bec0adca9fe97e2dc0bbc8be7916", "tree": "dc13bb600656ecaa960d6231437cf57f23f1dc23", "parents": [ "48448409f2e89dbbcc812bb4c182b7ac8ec703b6", "5f98dbbdc2cc4e01385ea3c705f1a8b45d4d1308" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "message": "Merge \"msm: Copper: Add board and device tree support for SPI driver\" into msm-3.0" }, { "commit": "48448409f2e89dbbcc812bb4c182b7ac8ec703b6", "tree": "80a9124919b0ff7162308883638da11ff42ffb4b", "parents": [ "c5f192c7e298784bfebb1b1ef1d8970b5afce07b", "c4093f9ae5c77f8d7e14ca558d79e9a2484e0d96" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 00:24:15 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 00:24:15 2012 -0800" }, "message": "Merge \"msm: sdio: Remove sdio tty ciq device.\" into msm-3.0" }, { "commit": "c5f192c7e298784bfebb1b1ef1d8970b5afce07b", "tree": "f7350004f535677ada6955a92440e2b32deb7453", "parents": [ "bf00c11662f2e2a8ed29d457f5a8a04868b91f97", "732dcd668ffa9c2160fca0c34d21107be7a37cda" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 00:24:15 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 00:24:15 2012 -0800" }, "message": "Merge \"msm: rotator: Add pseudo-planar output for interleaved format.\" into msm-3.0" }, { "commit": "bf00c11662f2e2a8ed29d457f5a8a04868b91f97", "tree": "71fcfb5eae17c2f52bb01fbc41dc365ac26a3a8e", "parents": [ "7ed41d531ca8a8fa945ea03dd80e623711c9dc60", "fa559f6cb6c9a75beb48b594f952ccfe213c4234" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 00:24:15 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 00:24:15 2012 -0800" }, "message": "Merge \"msm_fb: display: fix underrun seen with big src coordinates\" into msm-3.0" }, { "commit": "cc5d20d1c1c52cb69fc4bae5bb626fd76bfe730e", "tree": "a913b00b7c67f097694625ed5933f69b19be7cae", "parents": [ "7ed41d531ca8a8fa945ea03dd80e623711c9dc60" ], "author": { "name": "Gopikrishnaiah Anandan", "email": "gopikr@codeaurora.org", "time": "Tue Jan 10 18:43:50 2012 -0800" }, "committer": { "name": "Rajeshwar Kurapaty", "email": "rkurapat@codeaurora.org", "time": "Thu Jan 19 13:26:27 2012 +0530" }, "message": "vidc: Map firmware buffers after memory clocks are ON.\n\nChange will delay mapping of buffers until bus bandwidth is\nrequested by video driver\n\nChange-Id: Ibb6867baf6b3e821ec3ceafcdcab1e9225a5b109\nSigned-off-by: Gopikrishnaiah Anandan \u003cgopikr@codeaurora.org\u003e\n" }, { "commit": "382d3ce8413ce9062cfcc0ff134e694f5ac58230", "tree": "6ad9b0cca049955536760be6fac4776cbe4b7d93", "parents": [ "7ed41d531ca8a8fa945ea03dd80e623711c9dc60" ], "author": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Mon Jan 02 20:24:28 2012 +0800" }, "committer": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Thu Jan 19 12:27:21 2012 +0530" }, "message": "input: atmel_mxt_ts: Add support for keyarray object\n\nKeyarray(T15) object is used for handling capactive keys.\nIt can handle 32 keys and the keys supported are passed\nfrom platform data as key_codes.\n\nChange-Id: Iac589afb59e8ff69b6e1eb86bafdc0b5382c3edd\nSigned-off-by: Mohan Pallaka \u003cmpallaka@codeaurora.org\u003e\n" }, { "commit": "7ed41d531ca8a8fa945ea03dd80e623711c9dc60", "tree": "e1ddd5fa02a96831c9cec07dc17963de7eb7695e", "parents": [ "76ed95963d55dcabbbb0db383f2d130e213533ad", "3d4fe1ac86faf189860ed2bfd232a313f2372507" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jan 18 21:35:34 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jan 18 21:35:34 2012 -0800" }, "message": "Merge changes I1dbe1343,If2efa95c,Id299d224,I81fb7eee,Id3a3706d,Iecb7b40a,Icc18437a into msm-3.0\n\n* changes:\n gpu: ion: Refactor debugfs printing\n gpu: ion: Add error message when allocation fails\n gpu: ion: Fix ion client name allocation\n gpu: ion: Add decrement of mapping count\n gpu: ion: Clean up logging messages\n gpu: ion: Fix SCM call message size\n gpu: ion: Add support for adjacent heaps\n" }, { "commit": "76ed95963d55dcabbbb0db383f2d130e213533ad", "tree": "61d0fe67c3db2f5454276c800f893afa8490a52c", "parents": [ "4d05ed377635f1955412c580d2e925babd0fa122", "e0e9e92051e2170b79713f3455c481e8defd2e47" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jan 18 21:35:34 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jan 18 21:35:34 2012 -0800" }, "message": "Merge \"msm: vidc: Remove endianness change for 1080p firmware.\" into msm-3.0" }, { "commit": "d6140eb5ef2ca2f342be568cc369a4ceeaeb9eac", "tree": "b4570c4511dd63a3d6e2f6c4185442b757932b2d", "parents": [ "089ec2e761dcffc2c2e3fda6dee59d74f481374b" ], "author": { "name": "Venkateshwarlu Domakonda", "email": "Venkateshwarlu@codeaurora.org", "time": "Tue Jan 17 16:23:52 2012 +0530" }, "committer": { "name": "Venkateshwarlu Domakonda", "email": "Venkateshwarlu@codeaurora.org", "time": "Thu Jan 19 09:51:55 2012 +0530" }, "message": "radio: iris: Use service availability to indicate station\u0027s signal strength\n\nCheck the service availability event to indicate the signal strength\nof the tuned station.\n\nChange-Id: I7d1c1f3de13351222cfdc27bc2d80dd08aadfdf2\nCRs-Fixed: 331137\nSigned-off-by: Venkateshwarlu Domakonda \u003cVenkateshwarlu@codeaurora.org\u003e\n" }, { "commit": "0d81f315559540bdc8e459bf757ad96ae6b4b5e1", "tree": "675d62f2f554009e6cd5ddad8f5d0ec44d22ca0d", "parents": [ "089ec2e761dcffc2c2e3fda6dee59d74f481374b" ], "author": { "name": "Pavankumar Kondeti", "email": "pkondeti@codeaurora.org", "time": "Fri Jan 13 11:34:10 2012 +0530" }, "committer": { "name": "Pavankumar Kondeti", "email": "pkondeti@codeaurora.org", "time": "Thu Jan 19 08:15:37 2012 +0530" }, "message": "USB: OTG: msm: Add PMIC VBUS notification support for peripheral only mode\n\nAdd PMIC VBUS notification support for peripheral only mode and\nallow PHY retention and power collapse. This patch also makes\nchanges to probe function to request PMIC ID IRQ in only OTG mode.\n\nCRs-fixed: 330349\nChange-Id: I4a5a6c50b0a3b56dcf78aea5b23499a264b3c9d5\nSigned-off-by: Pavankumar Kondeti \u003cpkondeti@codeaurora.org\u003e\n" }, { "commit": "4d05ed377635f1955412c580d2e925babd0fa122", "tree": "c04ff142b4ddaa735806209f98cacde1081f03d7", "parents": [ "089ec2e761dcffc2c2e3fda6dee59d74f481374b" ], "author": { "name": "Gopikrishnaiah Anandan", "email": "gopikr@codeaurora.org", "time": "Fri Jan 13 11:08:44 2012 -0800" }, "committer": { "name": "Deva Ramasubramanian", "email": "dramasub@codeaurora.org", "time": "Wed Jan 18 18:43:21 2012 -0800" }, "message": "vidc: Enable clocks required for secure playback.\n\nThe video driver should enable iommu clocks for vcodec, mdp and\nrotator for content protection playback. Expose clocks to video\ndriver to enable for secure playback.\n\nChange-Id: I2037cf5825d0b9cc7f37cf7fe56396163cb1db24\nSigned-off-by: Gopikrishnaiah Anandan \u003cgopikr@codeaurora.org\u003e\n" }, { "commit": "64b43261ea6ec6c584f0a620c60adc55e7f878c4", "tree": "120d156dc10ff8b257b8b783958ff09005decb55", "parents": [ "089ec2e761dcffc2c2e3fda6dee59d74f481374b" ], "author": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Tue Dec 06 17:29:15 2011 -0800" }, "committer": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Wed Jan 18 18:22:37 2012 -0800" }, "message": "ASoC: WCD9310: Read MBHC Firmware data for calibration\n\nThe MBHC headset specific calibration data is stored in the filesystem\nas a firmware file. Read this data during initializing MBHC and\nperform calibration. If this data is not found, fallback to using\ndefault data provided by the machine driver.\n\nChange-Id: I1cabfb2bb19ef379cdce14ed6b1af8a62e34c790\nSigned-off-by: Patrick Lai \u003cplai@codeaurora.org\u003e\n" }, { "commit": "7355db013022a7db136dfef700a7f32d039a8bcb", "tree": "d74b0e5066a2de5274ae026db94a97feabac2ffe", "parents": [ "a21169dc448b5e21705ec5be53e398f8037a46f7" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Fri Jan 13 16:59:13 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed Jan 18 17:45:29 2012 -0800" }, "message": "msm: board: Add ION heap for Audio\n\nAdd 2.72MB ION heap for Audio to enable Audio\nto use ION for memory management. This ION heap\nwill replace pmem_audio pmem device.\n\nChange-Id: Icc844d30873dc60e6f8c41b24ea98de021a75205\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "a21169dc448b5e21705ec5be53e398f8037a46f7", "tree": "5bea54ea0c62e89e3063463043c4ef0011492bbd", "parents": [ "b88eef1aca899bb540f1315898ec5b3aacab37d4" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed Jan 04 09:17:06 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed Jan 18 17:45:11 2012 -0800" }, "message": "msm: board: Increase ION MM heap size\n\nIncrease ION MM heap size to 120MB to allow Camera\nto work at 8MP with 5 snapshots.\n\nChange-Id: I527768f02b39c6a97e1ea06b5e3e171d14e2e1e4\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "b88eef1aca899bb540f1315898ec5b3aacab37d4", "tree": "03662875fe3abc77061856dc8bf763b233593119", "parents": [ "80854eb4911e79949d5fe63c0c2e0e490342e6c0" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Sun Jan 15 10:59:26 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed Jan 18 17:44:44 2012 -0800" }, "message": "msm: board: Restore SF and MM heap to PMEM sizes\n\nSF and MM heap are currently incorrectly sized.\nClients of these two heaps will run out of memory\nand start failing.\n\nRestore the SF and MM heap sizes to PMEM sizes. SF\nheap will be 64MB if HDMI is configured as primary\notherwise 40MB. MM heap will be 66MB.\n\nChange-Id: If1cd6dda58195ab6e4b71d111a017e1c59249849\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "80854eb4911e79949d5fe63c0c2e0e490342e6c0", "tree": "12d4791dd2fb01df13942f624d7724af5ad9b97c", "parents": [ "42ebe71efc4143580fc210e62b92d7a616bfd91e" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Thu Jan 12 12:00:23 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed Jan 18 17:44:32 2012 -0800" }, "message": "gpu: ion: Add new heap for qse comm\n\nAdd new 1MB carveout heap for Qualcomm Secure Executive (QSE)\ncommunications.\n\nChange-Id: I8cc87d5af68e9fd4f775770b16638ee01ef88e05\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "089ec2e761dcffc2c2e3fda6dee59d74f481374b", "tree": "11adadc854a892dfbf758b01f46d52c35fe0c2ac", "parents": [ "3110d3fbe0ad53f5dd249be31891595200e0ace9", "f34b4564b9c023e04d5c888cf07fd51658d308d9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jan 18 17:01:10 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jan 18 17:01:10 2012 -0800" }, "message": "Merge changes Icc72e27b,I4bdddb5d into msm-3.0\n\n* changes:\n thermal: tsens: Change the TSENS min threshold\n thermal: tsens: Add tsens notify callback\n" }, { "commit": "3d4fe1ac86faf189860ed2bfd232a313f2372507", "tree": "1dad5846fb06a99c6daf05e775bb16dcc8af1ecb", "parents": [ "35e2f2f14b70047a758d036c1adf4f110346b93a" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Fri Jan 13 11:42:15 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed Jan 18 16:41:56 2012 -0800" }, "message": "gpu: ion: Refactor debugfs printing\n\nPrinting to debugfs is done from a centralized location for\nall the heaps managed by ion. This architecture is not\nsustainable in the long run since different heaps have different\nrequirements for what should be printed.\n\nRefactor the debugfs printing for ion so that each heap is\nresponsible for printing its information.\n\nChange-Id: I1dbe13432a4ab07f27ea4756c3be7fa01ad1df92\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "35e2f2f14b70047a758d036c1adf4f110346b93a", "tree": "f8ff19c0c68e4ef12f7322ef134ef0dccfaf4215", "parents": [ "63e5f3bc5a7cbbec0654392ce2c7e47540aea6e2" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed Jan 11 17:31:47 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed Jan 18 16:41:47 2012 -0800" }, "message": "gpu: ion: Add error message when allocation fails\n\nAdd error message when allocation from ion fails.\n\nChange-Id: If2efa95c563c9f076b85958a70ea66afa3983325\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "63e5f3bc5a7cbbec0654392ce2c7e47540aea6e2", "tree": "00361c0bee65d8cd28fcc19ee24d5e059b1df975", "parents": [ "cb9ad9ead5dd58daa79cb0cd52fd69f7d42f058c" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed Jan 11 16:42:37 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed Jan 18 16:41:26 2012 -0800" }, "message": "gpu: ion: Fix ion client name allocation\n\nThe ion client name used for debugging were being\nallocated on the stack for user space clients. This\ncauses the name to be garbled when later printed.\n\nInstead, allocate the name from the heap.\n\nChange-Id: Id299d224192f127197bef2eeb22d881b3a31795c\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "cb9ad9ead5dd58daa79cb0cd52fd69f7d42f058c", "tree": "cbf11682eadf59ef2f535dda3be2fbfc9d3a1c94", "parents": [ "9b2d1c2f8cce407e3f688df8245da969edd6750b" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Mon Jan 09 11:15:14 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed Jan 18 16:41:15 2012 -0800" }, "message": "gpu: ion: Add decrement of mapping count\n\nAdd decrement of mapping count when mapping fails\nand corresponding SMI release region call.\n\nChange-Id: I81fb7eeee9973c770a65f02236c5358ce313e3a0\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "9b2d1c2f8cce407e3f688df8245da969edd6750b", "tree": "c90958e2d350f3d5a934d55b435528b159083dff", "parents": [ "41cf3e3363e4c6d5ba79af22db98a1bba329b0dd" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Mon Jan 09 15:23:08 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed Jan 18 16:41:04 2012 -0800" }, "message": "gpu: ion: Clean up logging messages\n\nRemove duplicate logging message for failure to create\na heap. Add logging message with name, base address, and\nsize of each heap created.\n\nChange-Id: Id3a3706d914ffa72b0ecd84eb98785a678ceda9a\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "41cf3e3363e4c6d5ba79af22db98a1bba329b0dd", "tree": "d58b3ab52ca8fe5c85718617aa582134eba3c6df", "parents": [ "42ebe71efc4143580fc210e62b92d7a616bfd91e" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Mon Jan 16 12:13:24 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed Jan 18 16:40:53 2012 -0800" }, "message": "gpu: ion: Fix SCM call message size\n\nThe SCM call message size used to protect and\nunprotect memory is incorrect. The interface expects\n13 bytes but 16 bytes is sent due to padding of the\nmessage struct.\n\nPack the message structure to force the size of the\nstructure to 13 bytes.\n\nChange-Id: Iecb7b40aa7e94454620c19cd70c3106392d2d311\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "42ebe71efc4143580fc210e62b92d7a616bfd91e", "tree": "bbc1ca6a92a1058478940d7ee01245f7315407ae", "parents": [ "3110d3fbe0ad53f5dd249be31891595200e0ace9" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Tue Jan 10 16:30:58 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed Jan 18 16:40:39 2012 -0800" }, "message": "gpu: ion: Add support for adjacent heaps\n\nION has to guarantee that two of the heaps are\nadjacent to each other. This is due to a limitation\nin the hardware. Add code to ensure these heaps\nare adjacent.\n\nChange-Id: Icc18437a50e1d872112468d02b61ab47fd70acc9\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "3110d3fbe0ad53f5dd249be31891595200e0ace9", "tree": "c73b00e4b014a4109dab62945789f7b1992ab6f8", "parents": [ "b67b56973be4cfb6b136dad652d0c5bf1553e27b", "6e2e26984f11692468c273dc97dc05c317945449" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jan 18 15:18:39 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jan 18 15:18:40 2012 -0800" }, "message": "Merge \"tzcom: Add support for modifying specific fields in cmd_buf\" into msm-3.0" }, { "commit": "b67b56973be4cfb6b136dad652d0c5bf1553e27b", "tree": "5016dd0d2176396aa0833f5bfff2e957b899051f", "parents": [ "8f920ae2dc56f4f58bb2f2da64102b53d157cd31", "7c6aa74dbe836c6ac14f718b47925baf6a1e2d16" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jan 18 15:18:39 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jan 18 15:18:40 2012 -0800" }, "message": "Merge \"msm: board-8064: Port ION from 8960 to 8064\" into msm-3.0" }, { "commit": "964f1c9b9ff88a05f8da5b15aabb5ddd9cdfe9cc", "tree": "670d5fadf0d33085f8b88ad0991631387d9cc50b", "parents": [ "6be5d51835a3147983a18a278270d9999d451251" ], "author": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Wed Jan 18 14:57:51 2012 -0800" }, "committer": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Wed Jan 18 14:57:51 2012 -0800" }, "message": "net: usb: Set skb protocol based on RMNET Link Layer Protocol Mode\n\nEmbedded rmnet driver is setting skb protocol to ethernet link layer\nprotocol, which causes the IP stack to drop the packets if it is set\nto raw IP link layer protocol mode. Hence set the SKB protocol based\non the RMNET link layer protocol mode.\n\nChange-Id: Ife1243feec54a50c00ec833b6ed72f59bf883b94\nSigned-off-by: Hemant Kumar \u003chemantk@codeaurora.org\u003e\n" }, { "commit": "8f920ae2dc56f4f58bb2f2da64102b53d157cd31", "tree": "6a948f499f918aad06cbe46a3f240db20a680d27", "parents": [ "284fc85908c31b7424cc600083c2499d4188bdfd" ], "author": { "name": "Deva Ramasubramanian", "email": "dramasub@codeaurora.org", "time": "Thu Jan 12 11:33:08 2012 -0800" }, "committer": { "name": "Rajesh Sastrula", "email": "vrajesh@codeaurora.org", "time": "Wed Jan 18 13:19:28 2012 -0800" }, "message": "msm: defconfig: Enable writeback panel for wfd\n\nFor wifi display, the writeback panel is needed to capture the output of\nmdp. Setting this config enables the writeback panel.\n\nChange-Id: I51006b74f63d286af6ca62bd95aa4fe2129f9fe4\nSigned-off-by: Deva Ramasubramanian \u003cdramasub@codeaurora.org\u003e\n" }, { "commit": "284fc85908c31b7424cc600083c2499d4188bdfd", "tree": "27b7f03c5197bbff9260aa6110514c158a84f0c1", "parents": [ "6be5d51835a3147983a18a278270d9999d451251" ], "author": { "name": "Rajesh Sastrula", "email": "vrajesh@codeaurora.org", "time": "Sat Jan 14 14:45:23 2012 -0800" }, "committer": { "name": "Rajesh Sastrula", "email": "vrajesh@codeaurora.org", "time": "Wed Jan 18 13:19:07 2012 -0800" }, "message": "msm_fb: display: Fix incorrect goto call\n\nDuring the probe for writeback panel, for MDP hardware versions\nearlier than 4.3 an incorrect goto call un registers the bus scale handle\nthat primary panel uses. This is causing the boot failures because the\nprimary panel turn on sequence triggers the bus scale update request on\nalready unregistered handle.\n\nChange-Id: Ie604b0ba5606d9664d2aeff28b8bea131965de61\nSigned-off-by: Rajesh Sastrula \u003cvrajesh@codeaurora.org\u003e\n" }, { "commit": "d9a4173222de868e13a192ab15b88f3f7821c796", "tree": "4e439e92d97ad94cf7d35b8b7276c6f9921f5e1c", "parents": [ "6be5d51835a3147983a18a278270d9999d451251" ], "author": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Mon Oct 17 09:41:05 2011 -0600" }, "committer": { "name": "Mahesh Sivasubramanian", "email": "msivasub@codeaurora.org", "time": "Wed Jan 18 12:31:16 2012 -0700" }, "message": "msm: iomap-8064: Add RPM, SAW-L2 and SAW-CPU memory map\n\nAdd memory map for RPM, SAW L2 and SAW CPU registers for\ncores 2 and 3 in a quad core system.\n\nChange-Id: I6adf24ec072f09390d15596b8e267fcd9ee0acec\nSigned-off-by: Praveen Chidambaram \u003cpchidamb@codeaurora.org\u003e\n" }, { "commit": "506cfe7691c7e88642dc964cff1712e62bfcba1b", "tree": "f001859b9e264a75ce893e7397f41c97c045925e", "parents": [ "54dca2dd09322ea4ab99a4d54bd3640d95aebb8f" ], "author": { "name": "Rob Herring", "email": "rob.herring@calxeda.com", "time": "Sun Nov 27 20:16:33 2011 -0600" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Wed Jan 18 11:01:48 2012 -0800" }, "message": "of/irq: of_irq_init: add check for parent equal to child node\n\nWith the revert of \"of/irq: of_irq_find_parent: check for parent equal to\nchild\" (dc9372808412edb), we need another way to handle parent node equal\nto the child node. This can simply be handled in of_irq_init by checking\nfor this condition.\n\nChange-Id: Iab2aff3db1e3eb61982102053806c44aceb5008b\nSigned-off-by: Rob Herring \u003crob.herring@calxeda.com\u003e\nTested-by: Pawel Moll \u003cpawel.moll@arm.com\u003e\nTested-by: Stephen Warren \u003cswarren@nvidia.com\u003e\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "54dca2dd09322ea4ab99a4d54bd3640d95aebb8f", "tree": "5fbfc7a2d62c4114fef82666af74a595583dfd57", "parents": [ "6be5d51835a3147983a18a278270d9999d451251" ], "author": { "name": "Rob Herring", "email": "rob.herring@calxeda.com", "time": "Tue Sep 20 15:13:50 2011 -0500" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Wed Jan 18 11:01:40 2012 -0800" }, "message": "of/irq: introduce of_irq_init\n\nof_irq_init will scan the devicetree for matching interrupt controller\nnodes. Then it calls an initialization function for each found controller\nin the proper order with parent nodes initialized before child nodes.\n\nBased on initial pseudo code from Grant Likely.\n\nChanges in v4:\n- Drop unnecessary empty list check\n- Be more verbose on errors\n- Simplify \"if (!desc) WARN_ON(1)\" to \"if (WARN_ON(!desc))\"\n\nChanges in v3:\n- add missing kfree\u0027s found by Jamie\n- Implement Grant\u0027s comments to simplify the init loop\n- fix function comments\n\nChanges in v2:\n- Complete re-write of list searching code from Grant Likely\n\nChange-Id: I5ff76c3aa0f7bdf66577970dd9506336cd5712dd\nSigned-off-by: Rob Herring \u003crob.herring@calxeda.com\u003e\nReviewed-by: Jamie Iles \u003cjamie@jamieiles.com\u003e\nTested-by: Thomas Abraham \u003cthomas.abraham@linaro.org\u003e\nAcked-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "6be5d51835a3147983a18a278270d9999d451251", "tree": "6b5b765e860257f00ba7f62171d92482728ca769", "parents": [ "6f0922d20cfe4e830b6711499dd042423ed7fe1d", "31f45dafe0b257cd662e944dffd3cd5a57f5ae17" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jan 18 08:32:55 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jan 18 08:32:55 2012 -0800" }, "message": "Merge \"radio-tavarua: Modify FM Turn Off Sequence.\" into msm-3.0" }, { "commit": "6f0922d20cfe4e830b6711499dd042423ed7fe1d", "tree": "291beb93f9fa41dee6a1bc2a398f928f9fd6d5ca", "parents": [ "4c8dbf894abade1b16ae99725a66e08ede70a546", "a2f6df1e2bdec39c1ea739355cc3c032c605bebe" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jan 18 06:21:01 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jan 18 06:21:01 2012 -0800" }, "message": "Merge \"msm: board-7x27A: Increase pmem_adsp size\" into msm-3.0" }, { "commit": "4c8dbf894abade1b16ae99725a66e08ede70a546", "tree": "870ade881820830ab17a41236fa6decf7ffe9c0e", "parents": [ "9b2463db60c603ae0436476c976cb10090acc50e", "7a068da60a82745fa226c259f2cf2e1c0710dcae" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jan 18 06:21:01 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jan 18 06:21:01 2012 -0800" }, "message": "Merge \"msm: Camera: clear control queue\" into msm-3.0" }, { "commit": "9b2463db60c603ae0436476c976cb10090acc50e", "tree": "ac621b8bebe258c5b863222f380367d510db8470", "parents": [ "5a5986baf5bf86c1835212db76c25a2c8a669077", "6983984c309a429d2ee3f161003c53335a30c6ae" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jan 18 04:39:10 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jan 18 04:39:10 2012 -0800" }, "message": "Merge \"radio: iris: Increase the RT buffer to fit the RT header\" into msm-3.0" }, { "commit": "5a5986baf5bf86c1835212db76c25a2c8a669077", "tree": "eb0f389fd6aa0148336143e6e94564edf655890d", "parents": [ "399efeb5013c4db26c8e5411cf8340bfe432be03", "341446bea2e4c9c82bdc5e7f6e9d92f8d4c817cf" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jan 18 04:39:10 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jan 18 04:39:10 2012 -0800" }, "message": "Merge changes I492c4944,Iaca37c61 into msm-3.0\n\n* changes:\n msm: dsps: read from sleep clock in DSPS_IOCTL_READ_SLOW_TIMER\n msm: timer: add api to read sleep counter\n" }, { "commit": "399efeb5013c4db26c8e5411cf8340bfe432be03", "tree": "cdca918b99cae91f6324b7e934147e35e0bb597e", "parents": [ "35485b5b4f4caad8e0cd1fb1b8af3df7bf90e9d8", "73c99e82ecc598e0324b9daa5a567cafc06cd921" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jan 18 04:39:10 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jan 18 04:39:10 2012 -0800" }, "message": "Merge changes Ic6fc032a,I02413658 into msm-3.0\n\n* changes:\n msm: board-9615: Add HSIC Peripheral support\n usb: gadget: Add HSIC peripheral support.\n" }, { "commit": "97b8c2235280e6de0b9ff0ef0da76fe3333b4e3a", "tree": "57ed103a22363457e5cf818a5077e361eb2a3d25", "parents": [ "35485b5b4f4caad8e0cd1fb1b8af3df7bf90e9d8" ], "author": { "name": "Anna Perel", "email": "aperel@codeaurora.org", "time": "Wed Jan 18 10:08:14 2012 +0200" }, "committer": { "name": "Anna Perel", "email": "aperel@codeaurora.org", "time": "Wed Jan 18 10:08:14 2012 +0200" }, "message": "usb: gadget: Add proper cleanup of disabled endpoints\n\nClear driver_data after disabling endpoints\nto prevent shortage of endpoints and failures\non their reallocation.\n\nChange-Id: I2dc74799d440b2e1d5e53fc0f89decbce494d6ec\nSigned-off-by: Anna Perel \u003caperel@codeaurora.org\u003e\n" }, { "commit": "35485b5b4f4caad8e0cd1fb1b8af3df7bf90e9d8", "tree": "16165ed3c50ea9bd13f746929baabe00db3797a4", "parents": [ "6ccfed844649267e05fecb2a725fd3603f8bac73", "7e8d5f5d993dffbda1cb50f643e5eb62264ba42c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 17 23:37:46 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jan 17 23:37:46 2012 -0800" }, "message": "Merge \"defconfig: msm8960: disable LEGACY_PTYS\" into msm-3.0" }, { "commit": "6ccfed844649267e05fecb2a725fd3603f8bac73", "tree": "777a51293dd607b67092f93d54896c25cb65e16a", "parents": [ "bb135041829c8892c4d8454d6cce8cd18c206529", "6fb6e94208d7eacebf159127b558515ac77ea164" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 17 23:37:46 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jan 17 23:37:46 2012 -0800" }, "message": "Merge \"vidc: 1080p: Increase context memory size of the H.264 encoder.\" into msm-3.0" }, { "commit": "bb135041829c8892c4d8454d6cce8cd18c206529", "tree": "58567de0e41bc6ce762a126f58192fe8868e489c", "parents": [ "81d013954191ede846cd751892c664914aefb8ad", "0f7edf7796c170f8dc4d87e71dcd77c24c93c39a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 17 23:37:46 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jan 17 23:37:46 2012 -0800" }, "message": "Merge \"usb: otg: Add support for power supply API for USB charging\" into msm-3.0" }, { "commit": "81d013954191ede846cd751892c664914aefb8ad", "tree": "4f0d8578fa100bfd3ebe175ccb654e5631f667d7", "parents": [ "7756577620180abacf417f5cbf8fa5f98a652e1a", "2f0a847b15b512710f6f15adb269199bcd6b6691" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 17 23:37:46 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jan 17 23:37:46 2012 -0800" }, "message": "Merge \"msm: scm-pas: Don\u0027t ignore bw requests when dfab clock exists\" into msm-3.0" }, { "commit": "7a068da60a82745fa226c259f2cf2e1c0710dcae", "tree": "2d9c7eb148792fff4268382bcd5cc5b36707039c", "parents": [ "7756577620180abacf417f5cbf8fa5f98a652e1a" ], "author": { "name": "Manogna Reddy Alle", "email": "cmalle@codeaurora.org", "time": "Tue Jan 17 15:34:28 2012 +0530" }, "committer": { "name": "Manogna Reddy Alle", "email": "cmalle@codeaurora.org", "time": "Wed Jan 18 12:19:21 2012 +0530" }, "message": "msm: Camera: clear control queue\n\nClear control queue everytime before entering wait in msm_control as\nthere might be invalid payloads in the queue and this can lead to\nnot waiting at all and exit before the valid command completes.\n\nChange-Id: I34991968cb6bb9c2978bcea4d8ce641894cc2453\nSigned-off-by: Manogna Reddy Alle \u003ccmalle@codeaurora.org\u003e\n" }, { "commit": "e370f46fefeba6967cacab7cdb537c11db833a2f", "tree": "cb5fd9b7f62ad2ca51292237fa85a117414a511b", "parents": [ "dde09ee24db66b14653da1f7299d834dcf15ee28" ], "author": { "name": "Lynus Vaz", "email": "lvaz@codeaurora.org", "time": "Tue Jan 10 18:34:08 2012 +0530" }, "committer": { "name": "Lynus Vaz", "email": "lvaz@codeaurora.org", "time": "Wed Jan 18 10:46:39 2012 +0530" }, "message": "msm: 7x27a: Enable idle stats device for 7x27A\n\nEnable idle stats device framework to support User Mode GPU DCVS\non 7x27A.\n\nChange-Id: I31aa21c053b85d4d8c84461f1793c3dd49ef96d2\nSigned-off-by: Lynus Vaz \u003clvaz@codeaurora.org\u003e\n" }, { "commit": "dde09ee24db66b14653da1f7299d834dcf15ee28", "tree": "137d33fb8f364cbf6b7038bdbf8ecc5c4884c002", "parents": [ "7756577620180abacf417f5cbf8fa5f98a652e1a" ], "author": { "name": "Lynus Vaz", "email": "lvaz@codeaurora.org", "time": "Thu Jan 05 13:28:22 2012 +0530" }, "committer": { "name": "Lynus Vaz", "email": "lvaz@codeaurora.org", "time": "Wed Jan 18 10:46:01 2012 +0530" }, "message": "msm: Config option to enable idle stats device\n\nMSM_SLEEP_STATS_DEVICE option is used to compile idle stats device\nframework which is needed for GPU DCVS feature.\n\nChange-Id: I9550c90054587aa4fcec40131761eeaf54da8a03\nSigned-off-by: Lynus Vaz \u003clvaz@codeaurora.org\u003e\n" }, { "commit": "a2f6df1e2bdec39c1ea739355cc3c032c605bebe", "tree": "61fe03cb61f6abed5c40939c28e319024f35d19a", "parents": [ "7756577620180abacf417f5cbf8fa5f98a652e1a" ], "author": { "name": "Mahesh Lanka", "email": "mlanka@codeaurora.org", "time": "Thu Jan 05 16:54:40 2012 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 17 21:24:53 2012 -0700" }, "message": "msm: board-7x27A: Increase pmem_adsp size\n\nIncrease size of pmem_adsp region to enable high resolution\nvideo decode using neon optimized SW codecs.\n\nChange-Id: I7bbf7d743aac9f2e8cc1cd3227e4dc9fdb6aabe2\nSigned-off-by: Mahesh Lanka \u003cmlanka@codeaurora.org\u003e\n" }, { "commit": "fa559f6cb6c9a75beb48b594f952ccfe213c4234", "tree": "2c78f9de1f2082ef815d7c0fcc8cdd718b4e5f6c", "parents": [ "7756577620180abacf417f5cbf8fa5f98a652e1a" ], "author": { "name": "Adrian Salido-Moreno", "email": "adrianm@codeaurora.org", "time": "Fri Jan 13 16:28:54 2012 -0800" }, "committer": { "name": "Adrian Salido-Moreno", "email": "adrianm@codeaurora.org", "time": "Tue Jan 17 17:31:00 2012 -0800" }, "message": "msm_fb: display: fix underrun seen with big src coordinates\n\nMDP underrun happens if combination of x + w or y + h exceeds 2048.\nTo handle such use cases add an offset to the source address instead.\n\nChange-Id: I36a8b687c4e21cac9915b5bf71211c97f6b44ddd\nSigned-off-by: Adrian Salido-Moreno \u003cadrianm@codeaurora.org\u003e\n" }, { "commit": "da2f3cc0003c55cd18d6f052ecb9530fe2acea9a", "tree": "9bd6b653cc7e625585213de6693568d5c0be93ec", "parents": [ "7756577620180abacf417f5cbf8fa5f98a652e1a" ], "author": { "name": "Adrian Salido-Moreno", "email": "adrianm@codeaurora.org", "time": "Thu Jan 05 15:32:57 2012 -0800" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 17 18:24:05 2012 -0700" }, "message": "msm_fb: display: perform backlight updates on overlay play\n\nPerform pending backlight requests on overlay play to handle cases in\nwhich framebuffer updates are not happening to update backlight.\n\nChange-Id: I97a39c8fc9405f308ed684041b171bccc917154d\nSigned-off-by: Adrian Salido-Moreno \u003cadrianm@codeaurora.org\u003e\n" }, { "commit": "69425ffb7f4c483ed368f39aa4957132fd97c181", "tree": "e9774028b1d2c55fc2218a008efe0686ae92efd3", "parents": [ "7756577620180abacf417f5cbf8fa5f98a652e1a" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Thu Jul 07 01:56:51 2011 +0100" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Tue Jan 17 15:31:24 2012 -0800" }, "message": "ARM: 6993/1: platsmp: Allow secondary cpu hotplug with maxcpus\u003d1\n\nIf an ARM system has multiple cpus in the same socket and the\nkernel is booted with maxcpus\u003d1, secondary cpus are possible but\nnot present due to how platform_smp_prepare_cpus() is called.\nSince most typical ARM processors don\u0027t actually support physical\nhotplug, initialize the present map to be equal to the possible\nmap in generic ARM SMP code. Also, always call\nplatform_smp_prepare_cpus() as long as max_cpus is non-zero (0\nmeans no SMP) to allow platform code to do any SMP setup.\n\nAfter applying this patch it\u0027s possible to boot an ARM system\nwith maxcpus\u003d1 on the command line and then hotplug in secondary\ncpus via sysfs. This is more in line with how x86 does things.\n\nChange-Id: Ie97366fe3236670ec9c3cb3b77ab8f7ee4a39fd3\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\nCc: Paul Mundt \u003clethal@linux-sh.org\u003e\nCc: Kukjin Kim \u003ckgene.kim@samsung.com\u003e\nCc: David Brown \u003cdavidb@codeaurora.org\u003e\nCc: Tony Lindgren \u003ctony@atomide.com\u003e\nCc: Srinidhi Kasagar \u003csrinidhi.kasagar@stericsson.com\u003e\nCc: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n[stepanm@codeaurora.org: resolved trivial merge conflict]\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "b0f4036c4afacdd6817acf3584d62aaf19c09202", "tree": "a695abc470516ffa8ca29b8dfe30ac875f3df92c", "parents": [ "c72d819bb86fff8e3b0f87879a300f9251d88176" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Mon Jan 16 13:29:29 2012 -0800" }, "committer": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Tue Jan 17 14:55:23 2012 -0800" }, "message": "mfd: pm8038-core: enable bms and charger devices\n\nEnable charger and bms devices to make sure they are probed\non 8930.\n\nChange-Id: I4917de40a672628bab868260b280cfb580668e4e\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n" }, { "commit": "c72d819bb86fff8e3b0f87879a300f9251d88176", "tree": "416ee1c6d9c952e6024481b3ad9e0a9505df87fa", "parents": [ "310eb689ab50b6658da0f9f686aea89e92ed90c5" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Mon Jan 09 11:33:55 2012 -0800" }, "committer": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Tue Jan 17 14:55:16 2012 -0800" }, "message": "msm: 8930: enable charger, bms and ccadc\n\nEnable charger for PM8038 platform and its dependent devices.\nThis is required to enable charging on devices using PM8038.\n\nAlso change gpio mux configuration to make sure that VBUS\nis not pulled high when gpio_request is made.\n\nChange-Id: Id64bc3846090bcaedf00f5f9177930618fa61605\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n" }, { "commit": "310eb689ab50b6658da0f9f686aea89e92ed90c5", "tree": "fad84ffe7d5828dbcaf04b2dad24736fae1f7646", "parents": [ "7756577620180abacf417f5cbf8fa5f98a652e1a" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Mon Jan 09 10:59:10 2012 -0800" }, "committer": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Tue Jan 17 14:55:09 2012 -0800" }, "message": "mfd: pm8xxx: add charger, bms and ccadc devices on PM8038\n\nAdd supported power devices such as charger, bms and CCADC.\n\nThese devices are required to be enabled to provide charging\nfunctionality to the 8930 platform.\n\nChange-Id: Iae5182ff26ba1cbcb256aeb1aee619f7a368765f\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n" }, { "commit": "c59d62226a850caf80afc04e35d0fd060e91adf4", "tree": "7f8b76ff475b389e9b7a059d50f10a150c056c93", "parents": [ "7756577620180abacf417f5cbf8fa5f98a652e1a" ], "author": { "name": "Deepak Kotur", "email": "dkotur@codeaurora.org", "time": "Tue Jan 17 14:37:44 2012 -0800" }, "committer": { "name": "Deepak Kotur", "email": "dkotur@codeaurora.org", "time": "Tue Jan 17 14:43:47 2012 -0800" }, "message": "vidc: Added proper check for ION handle.\n\nION handle check was not correct for error case,\nadded the proper check for ION handle to handle\nthe error cases properly.\n\nChange-Id: I6bf3ce32d5b77d4f2c606fda1c511967156d62c0\nSigned-off-by: Deepak Kotur \u003cdkotur@codeaurora.org\u003e\n" }, { "commit": "c4093f9ae5c77f8d7e14ca558d79e9a2484e0d96", "tree": "7d93cfb21cf876c469b0e7bbab96088f9dd155b2", "parents": [ "7756577620180abacf417f5cbf8fa5f98a652e1a" ], "author": { "name": "Venkat Gopalakrishnan", "email": "venkatg@codeaurora.org", "time": "Fri Jan 13 17:57:31 2012 -0800" }, "committer": { "name": "Venkat Gopalakrishnan", "email": "venkatg@codeaurora.org", "time": "Tue Jan 17 14:40:40 2012 -0800" }, "message": "msm: sdio: Remove sdio tty ciq device.\n\nOEM\u0027s have requested to remove CIQ support from our sotfware,\nhence remove sdio tty ciq device that exposes the SDIO_CIQ channel\nto userspace. The channel configuration itself will be removed\nfrom client on the modem side. Also remove the test code related\nto SDIO_CIQ channel.\n\nChange-Id: I47702dd024d9aa549b55b713b12732838fb665a8\nSigned-off-by: Venkat Gopalakrishnan \u003cvenkatg@codeaurora.org\u003e\n" }, { "commit": "5f98dbbdc2cc4e01385ea3c705f1a8b45d4d1308", "tree": "6ad7af67c602320b971269e087c9f0b6b6b075a3", "parents": [ "7756577620180abacf417f5cbf8fa5f98a652e1a" ], "author": { "name": "Harini Jayaraman", "email": "harinij@codeaurora.org", "time": "Tue Dec 20 13:38:19 2011 -0700" }, "committer": { "name": "Harini Jayaraman", "email": "harinij@codeaurora.org", "time": "Tue Jan 17 15:16:10 2012 -0700" }, "message": "msm: Copper: Add board and device tree support for SPI driver\n\nThis patch describes the basic attributes in the device tree\nfor the MSM SPI driver. Support for specifying the GPIO pins\nassociated with SPI is not yet present.\n\nChange-Id: Idcb5cc28d84a2fa59463e698628da48cb058c652\nSigned-off-by: Harini Jayaraman \u003charinij@codeaurora.org\u003e\n" }, { "commit": "7c6aa74dbe836c6ac14f718b47925baf6a1e2d16", "tree": "ff269d7a3a23d77378ad356f58c490c4cb9786a5", "parents": [ "7756577620180abacf417f5cbf8fa5f98a652e1a" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Mon Jan 16 16:47:37 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Tue Jan 17 13:50:42 2012 -0800" }, "message": "msm: board-8064: Port ION from 8960 to 8064\n\nPort ION changes made to 8960 to 8064 board file.\n\nChange-Id: I6bacc24803397458aab2c47bec460b60368db27d\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "7756577620180abacf417f5cbf8fa5f98a652e1a", "tree": "e45755d6c517a95d868ba179cd51e312538abe33", "parents": [ "956e5be694e5495af4c4fd405786ee78664b7f6b", "6f9aa86e235e8ae510b0bce0f41150cc1dc7e591" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 17 12:27:40 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jan 17 12:27:40 2012 -0800" }, "message": "Merge changes I99f8604d,I50a535e8 into msm-3.0\n\n* changes:\n msm: v4l2: add ISP support for more formats.\n msm: v4l2: fix support for test app.\n" }, { "commit": "40ec7e905181bfda1133a689552b585014db4960", "tree": "363d779ca18a07ff8e0d5c14306e2b7716573fd7", "parents": [ "7b103970375e6857f11122f5176a7a1185eabe8b" ], "author": { "name": "Krishna Konda", "email": "kkonda@codeaurora.org", "time": "Tue Dec 20 19:28:25 2011 -0800" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 17 12:06:11 2012 -0700" }, "message": "msm: 8930: Add SDC1 and SDC3 platform data\n\nAdd regulator information for SDC1 and SDC3 along with sd card detect gpio\nand write protect switch gpio platform data for SDC3.\n\nChange-Id: Ib7de0cb1032a802c31276659fe6e71800ab739cb\nSigned-off-by: Krishna Konda \u003ckkonda@codeaurora.org\u003e\n" }, { "commit": "956e5be694e5495af4c4fd405786ee78664b7f6b", "tree": "3c0358e0f4b44eb7f0b477641a02af0142ed56f1", "parents": [ "7b103970375e6857f11122f5176a7a1185eabe8b", "c710a5e5d6a3578f539596702f7c991928b74d33" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 17 10:52:54 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jan 17 10:52:54 2012 -0800" }, "message": "Merge \"spi_qsd: Add support for new QUPe controller.\" into msm-3.0" }, { "commit": "e0e9e92051e2170b79713f3455c481e8defd2e47", "tree": "e5e8531c1fb7d27a12ff9f14e22502e16908ef44", "parents": [ "dabcc6c4c305ea5a98ffba7350ad482772e18a45" ], "author": { "name": "Deepika Pepakayala", "email": "deepikap@codeaurora.org", "time": "Tue Nov 22 13:41:28 2011 -0800" }, "committer": { "name": "Deepika Pepakayala", "email": "deepikap@codeaurora.org", "time": "Tue Jan 17 10:35:17 2012 -0800" }, "message": "msm: vidc: Remove endianness change for 1080p firmware.\n\nEndianness change is no longer required for 1080p\nfirmware starting with Nov 30th 2011 firmware version.\n\nChange-Id: I309d63b7efb544f80b44c6fc13955f186ece934b\nSigned-off-by: Deepika Pepakayala \u003cdeepikap@codeaurora.org\u003e\n" }, { "commit": "7b103970375e6857f11122f5176a7a1185eabe8b", "tree": "96b336d654b2df2c88e46b63abff38a224a50683", "parents": [ "67272e1a35796787a403eab000cd6c374f0ef556", "cf68d7a3f7f7dfb5f51a34c843bddbe176799ce9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 17 09:24:09 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jan 17 09:24:09 2012 -0800" }, "message": "Merge changes I8b0f5d25,I2835dacf,Idef697db,I34c6a1f5,Ie3340d07 into msm-3.0\n\n* changes:\n irq: irqdomain: Add API to find free irq range\n arm: gic: Check for error code on irq_domain_add\n irq: irqdomain: Change irq_domain_add to detect errors\n arm: gic: Register irqdomain after adding it\n irq: irqdomain: Add support for dynamic irq_desc allocations\n" }, { "commit": "67272e1a35796787a403eab000cd6c374f0ef556", "tree": "4317739a9a4c5a230a8a44a9e25436118476f510", "parents": [ "257f2091eae3dacaa73dd966de91425afa21475c", "72153812cf48340558f6436dabd3390b987ed5f5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 17 09:24:09 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jan 17 09:24:09 2012 -0800" }, "message": "Merge \"tracing: Clean up tb_fmt to not give faulty compile warning\" into msm-3.0" }, { "commit": "257f2091eae3dacaa73dd966de91425afa21475c", "tree": "6c0f26fd7e242a70b76a95e7276e8a04967ab762", "parents": [ "cbb79ea8a18fb70d7330aab63c649bc54a4b1c59", "6866b1ca9654815517c2bab72af8575795a334c2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 17 09:24:09 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jan 17 09:24:09 2012 -0800" }, "message": "Merge \"msm: pm-8x60: Check for SPM status to verify CPU_DEAD\" into msm-3.0" }, { "commit": "4ebfc3ff2e69deb60402095a47e35df20ed62136", "tree": "c9fdc68c37a939f9f8a62350dfe6c5ba026aaca2", "parents": [ "cbb79ea8a18fb70d7330aab63c649bc54a4b1c59" ], "author": { "name": "Shawn Guo", "email": "shawn.guo@linaro.org", "time": "Tue Dec 20 14:46:38 2011 +0800" }, "committer": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Tue Jan 17 09:02:22 2012 -0800" }, "message": "clk: add config option HAVE_CLK_PREPARE into Kconfig\n\nThe commit 40d3e0f (clk: provide prepare/unprepare functions) provides\nthe config option HAVE_CLK_PREPARE for platforms that have\nprepare/unprepare implementation to select. This patch adds the option\ninto drivers/clk/Kconfig, so that it can be actually selected.\n\nChange-Id: I6d448486d26792bcd87a28a3ead25c063af40731\nSigned-off-by: Shawn Guo \u003cshawn.guo@linaro.org\u003e\nCc: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n[sboyd@codeaurora.org: Remove CLKDEV config that isn\u0027t in 3.0]\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "23a812bf0d6c8c15db273d6865eb0b07026c7502", "tree": "ba82c6048cc0eca2bef246e9591fc1354300fa8b", "parents": [ "cbb79ea8a18fb70d7330aab63c649bc54a4b1c59" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Fri Jan 13 13:43:42 2012 -0700" }, "committer": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Tue Jan 17 09:42:20 2012 -0700" }, "message": "msm: bam_dmux: migrate to new clock voting api\n\nUpstream has changed the clock voting api from a single api that must\nbe atmoic context compatable, to a split api with atomic and non-atomic\ncomponents. Migrate to the new api as the old one is deprecated and\nwill be removed soon.\n\nChange-Id: I3c78db67f280873ff1911381e8ff44ebc564b3d2\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n" }, { "commit": "cbb79ea8a18fb70d7330aab63c649bc54a4b1c59", "tree": "32de5db26dad4fda1959730c262ea8ba176b74a8", "parents": [ "c230e1186c9d130bb5f437b45175362f76566708", "a072aeebe2f45fd9d49d19a60019eac86e910a92" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 17 07:14:34 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jan 17 07:14:34 2012 -0800" }, "message": "Merge \"msm: clock-8960: Remove QDSS clock support\" into msm-3.0" }, { "commit": "c230e1186c9d130bb5f437b45175362f76566708", "tree": "15e99ec65aa14f4bc70cae7a9cac3d4636776a96", "parents": [ "8086b13484001b0f966710b15d7aafdf3c95918b", "bfe8f3025a6d70ab2c9bd3a51cb5e67453ff7373" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 17 07:14:34 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jan 17 07:14:34 2012 -0800" }, "message": "Merge \"input: atmel_mxt_ts: Release irq and reset gpios\" into msm-3.0" }, { "commit": "8086b13484001b0f966710b15d7aafdf3c95918b", "tree": "5145ebc7357d8ef3925f52daaaac9b814388a0a1", "parents": [ "2b72427ff5781ae3334039de5143e7898b2e0bef", "84e420ed78c5318e6b60476ea4675b29406a881b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 17 04:17:08 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jan 17 04:17:08 2012 -0800" }, "message": "Merge \"ASoC: msm: Update the in_frame_info structure definition\" into msm-3.0" }, { "commit": "2b72427ff5781ae3334039de5143e7898b2e0bef", "tree": "c8be4a01559dede4784f8a2b1c31776c7c72f5cf", "parents": [ "e6734ed99a6b4be110f59330a0753d2022e4ba43", "407627044eadd67ce61fbbc55c6e6f40322f8b29" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 17 04:17:08 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jan 17 04:17:08 2012 -0800" }, "message": "Merge \"msm: board-msm7627a-camera: Create separate board file for camera\" into msm-3.0" }, { "commit": "e6734ed99a6b4be110f59330a0753d2022e4ba43", "tree": "df992cb488aa276aa69e6d0a80ac1a172857cd1f", "parents": [ "e1c5493f0ab583baf61a060fc8f41288f69032a9", "9db678b5b3ff8eb5c7a86065c937c10cc1a9456b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 17 04:17:08 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jan 17 04:17:08 2012 -0800" }, "message": "Merge changes Iab87561f,Id5d9a4d2 into msm-3.0\n\n* changes:\n ASoC: msm: update SLIMBUS_0_TX DAI to support 4 and 3 channels\n ASoC: wcd9310: Update Tabla Tx DAI to support 4 channels\n" }, { "commit": "0f7edf7796c170f8dc4d87e71dcd77c24c93c39a", "tree": "bcb14678e83716c876cee927e3c328df793a580c", "parents": [ "56b42db68ddf6aac9bc33130535e2a52d309ceea" ], "author": { "name": "Amit Blay", "email": "ablay@codeaurora.org", "time": "Sun Jan 15 10:11:27 2012 +0200" }, "committer": { "name": "Amit Blay", "email": "ablay@codeaurora.org", "time": "Tue Jan 17 13:36:15 2012 +0200" }, "message": "usb: otg: Add support for power supply API for USB charging\n\nWith this commit, USB Driver will start using Power Supply\nAPI rather than calling direct pmxxx driver API for USB charging.\nThis will allow hiding specific charger model (such as\nexternal LTC4088 charger used for MDM9x15) from USB driver.\n\nIn case the power supply API is not support, fallback to legacy\nAPI which uses pm8921 driver.\n\nChange-Id: Ic0f302e3aa8aa60f6483a0fdeec9389a0ded1fac\nSigned-off-by: Amit Blay \u003cablay@codeaurora.org\u003e\n" }, { "commit": "31f45dafe0b257cd662e944dffd3cd5a57f5ae17", "tree": "811ba1b9bf84aad68bb13124059d2597536a7cb4", "parents": [ "8c12e9bb5eefa2d7c53887712052fbe95ffad546" ], "author": { "name": "Venkateshwarlu Domakonda", "email": "Venkateshwarlu@codeaurora.org", "time": "Fri Jan 06 14:58:13 2012 +0530" }, "committer": { "name": "Venkateshwarlu Domakonda", "email": "Venkateshwarlu@codeaurora.org", "time": "Tue Jan 17 11:24:15 2012 +0530" }, "message": "radio-tavarua: Modify FM Turn Off Sequence.\n\nFlush the event and work queues prior to queuing READY event.\n\nChange-Id: I95584006d252b2284bf15562edbca50fa5593384\nCRs-Fixed: 327151, 326855\nSigned-off-by: Venkateshwarlu Domakonda \u003cVenkateshwarlu@codeaurora.org\u003e\n" }, { "commit": "6983984c309a429d2ee3f161003c53335a30c6ae", "tree": "6ab7dd37b25395839212309b1a3ee0ad15b628d1", "parents": [ "33ea426df44042799190ee4bf5d8bffc7f351b37" ], "author": { "name": "Srinivasa Rao Uppala", "email": "uppalas@codeaurora.org", "time": "Fri Jan 13 18:36:12 2012 +0530" }, "committer": { "name": "Srinivasa Rao Uppala", "email": "uppalas@codeaurora.org", "time": "Tue Jan 17 11:17:19 2012 +0530" }, "message": "radio: iris: Increase the RT buffer to fit the RT header\n\nIncrease the RDS Radio text buffer size to fit the RT header.\nAnd also limit the Radio text to maximum allowed length\n\nChange-Id: Ib38b4bfaae83d5f381a831c2e202c7f3a52698b4\nCRs-Fixed: 328036\nSigned-off-by: Srinivasa Rao Uppala \u003cuppalas@codeaurora.org\u003e\n" } ], "next": "732dcd668ffa9c2160fca0c34d21107be7a37cda" }