)]}' { "log": [ { "commit": "71e4eda8ce698178ee448ff82bdc5803c77a736d", "tree": "7e4cc334f5a3394e48dbe7661a7e91ecd7332cbe", "parents": [ "67dd5a25f4efbfccf973159429cb20acdc5b0e0e" ], "author": { "name": "Benjamin Herrenschmidt", "email": "benh@kernel.crashing.org", "time": "Sat Oct 06 18:52:27 2007 +1000" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sat Oct 06 09:32:56 2007 -0700" }, "message": "Fix non-terminated PCI match table in PowerMac IDE\n\nThe PCI device table in the powermac IDE driver isn\u0027t properly\nterminated. Depending on how your kernel is linked and other random\nfactors, you can end up with this driver matched against any other PCI\ndevice in your system, possibly crashing at boot.\n\nThanks to Heikki for tracking this down with me, the bug have been there\nfor some time, though it rarely hurts due to luck. In this case, the\nswitch from .22 to .23-rc9 is causing it to show up due to differences\nin the resulting layout of .data I suppose.\n\nSigned-off-by: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nCc: Paul Mackerras \u003cpmac@au1.ibm.com\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nCc: Heikki Lindholm \u003cholindho@cs.helsinki.fi\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "588a33556ccf3e2135c7b4527557616f72fc144c", "tree": "da6f4ddc1007e7a838b581102ada69ea88d4ff20", "parents": [ "7062cdc5edb3ba4b2eb906684cd19e103de1f920" ], "author": { "name": "Stephen Rothwell", "email": "sfr@canb.auug.org.au", "time": "Mon Sep 17 12:35:30 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Sep 17 12:35:30 2007 +0200" }, "message": "ide: remove unused variables from drivers/ide/ppc/pmac.c\n\nRemoves these warnings:\n\n/home/sfr/kernels/linus/drivers/ide/ppc/pmac.c: In function \u0027pmac_ide_dma_check\u0027:\n/home/sfr/kernels/linus/drivers/ide/ppc/pmac.c:1807: warning: unused variable \u0027map\u0027\n/home/sfr/kernels/linus/drivers/ide/ppc/pmac.c:1805: warning: unused variable \u0027pmif\u0027\n\nSigned-off-by: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\nCc: paulus@samba.org\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "7062cdc5edb3ba4b2eb906684cd19e103de1f920", "tree": "aea0258d0b0c2a81079f89985206a0a7e28027d1", "parents": [ "c2f828977ba5d17c13debba374ea252d18e5ccfb" ], "author": { "name": "Jorge Juan Chico", "email": "jjchico@gmail.com", "time": "Mon Sep 17 12:35:30 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Sep 17 12:35:30 2007 +0200" }, "message": "ide: ST320413A has the same problem as ST340823A\n\nST320413A has the same problem as ST340823A. Please see\nhttps://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.15/+bug/26119\n\nFrom: \"Jorge Juan Chico\" \u003cjjchico@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "56fe23d5a702a39ee3bb29a04b55db292479d07a", "tree": "71631f145fe8969f0c4d347a37fb5435e733bef8", "parents": [ "58e47bb1767aa89bfa9cf7ecf4bc051886ae22b3" ], "author": { "name": "Mikael Pettersson", "email": "mikpe@it.uu.se", "time": "Tue Sep 11 22:28:37 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Sep 11 22:28:37 2007 +0200" }, "message": "pdc202xx_new: PLL detection fix\n\nFix a bitmask typo in the pdc202xx_new PLL frequency detection code\nwhich causes it to truncate an intermediate difference to 26 bits\ninstead of the correct 30 bits (the PLL\u0027s bitwidth).\n\nSigned-off-by: Mikael Pettersson \u003cmikpe@it.uu.se\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "58e47bb1767aa89bfa9cf7ecf4bc051886ae22b3", "tree": "63d0c3162e788e38370067f9ea9bc92f9b48e818", "parents": [ "6c28c1f59dce3325d373f44766e23eb4237a74c8" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Sep 11 22:28:37 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Sep 11 22:28:37 2007 +0200" }, "message": "via82cxxx: add Arima W730-K8 and other rebadgings to short cables list\n\nPort of Alan\u0027s patch for pata_via.c.\n\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: Mikael Pettersson \u003cmikpe@it.uu.se\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6c28c1f59dce3325d373f44766e23eb4237a74c8", "tree": "66e557bc7a182a366d5829238cf1ecef5426573c", "parents": [ "03e6f489b32c0e7877bfe48f5619db725edf1fea" ], "author": { "name": "Tony Breeds", "email": "tony@bakeyournoodle.com", "time": "Tue Sep 11 22:28:36 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Sep 11 22:28:36 2007 +0200" }, "message": "pmac: build fix\n\nEnsure that BLK_DEV_IDE is built-in before allowing BLK_DEV_IDE_PMAC to\nbe selected.\n\nSigned-off-by: Tony Breeds \u003ctony@bakeyournoodle.com\u003e\nCc: Bret Towe \u003cmagnade@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "03e6f489b32c0e7877bfe48f5619db725edf1fea", "tree": "89d80fa4392b8d0010c8688ab1a00f5b00f8bc56", "parents": [ "2808b0a96a05ac8e826b5380eb2d30a10586707a" ], "author": { "name": "Daniel Exner", "email": "dex@dragonslave.de", "time": "Tue Sep 11 22:28:36 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Sep 11 22:28:36 2007 +0200" }, "message": "pata_ali/alim15x3: override 80-wire cable detection for Toshiba S1800-814\n\nAdd Toshiba S1800-814 to whitelist for both pata_ali and alim15x3,\nas it is correctly detected as 40-wire connected but this cable is\nshort enough to still use transfer modes higher than UDMA33.\n\nSigned-off-by: Daniel Exner \u003cdex@dragonslave.de\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2808b0a96a05ac8e826b5380eb2d30a10586707a", "tree": "55d8a98a780e7ddb2bda7af2ae083836870166c3", "parents": [ "6c3c22f3cb2b7cd0a42a024b93db76b5c3133d37" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Tue Sep 11 22:28:36 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Sep 11 22:28:36 2007 +0200" }, "message": "hpt366: UltraDMA filter for SATA cards (take 2)\n\nThe Marvell bridge chips used on HighPoint SATA cards do not seem to support\nthe UltraDMA modes 1, 2, and 3 as well as any MWDMA modes, so the driver needs\nto account for this in the udma_filter() method. In order to achieve that, do\nthe following changes:\n\n- install the method for all chips, not only HPT36x/370 and improve the code\n formatting by killing the extra tabs while at it;\n\n- add to the end of the \u0027switch\u0027 statement in the method cases for HPT372[AN]\n and HPT374 chips upon which the known SATA cards are based;\n\n- use hwif-\u003eultra_mask as a default mask for the ide_dma_filter() method to\n behave correctly;\n\n- move the HPT370[A] cases below the HPT36x case for consistency.\n\nWhile at it, replace the explicit UltraDMA mode masks with ATA_UDMA* constants\nall over the driver...\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Bob Ham \u003crah@bash.sh\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6c3c22f3cb2b7cd0a42a024b93db76b5c3133d37", "tree": "13cd84e47c9d354930443ef7db2df1985446ffc4", "parents": [ "7293136810936bbde403bcb67ac1b4dbae4dd790" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Tue Sep 11 22:28:36 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Sep 11 22:28:36 2007 +0200" }, "message": "ide: add ide_dev_is_sata() helper (take 2)\n\nMake the SATA drive detection code from eighty_ninty_three() into inline\nide_dev_is_sata() helper fixing it along the way to be more strict while\nchecking word 80 for the reserved values...\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "7293136810936bbde403bcb67ac1b4dbae4dd790", "tree": "bdbb37d76378bd9e96ef716130c253211ea0c46d", "parents": [ "35198234a26fdc0f858774e3ba143796323059a0" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Tue Sep 11 22:28:35 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Sep 11 22:28:35 2007 +0200" }, "message": "hpt366: fix PCI clock detection for HPT374 (take 4)\n\nHPT374 BIOS seems to only save f_CNT register value for the function #0 before\nre-tuning DPLL (that causes the driver to report obviously distorted f_CNT for\nthe function #1) -- fix this by always reading the saved f_CNT register value\nfrom the function #0 in the driver\u0027s init_chipset() method.\nWhile at it, introduce \u0027chip_type\u0027 for holding the \u0027struct hpt_info\u0027 field\nof the same name and replace the structure assignment with memcpy()...\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "35198234a26fdc0f858774e3ba143796323059a0", "tree": "ae737a2258a8462478251432a2659d6c702006be", "parents": [ "0505b55fb51fa289027f33ae793995c191277536" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Tue Sep 11 22:28:34 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Sep 11 22:28:34 2007 +0200" }, "message": "pdc202xx_new: fix PCI refcounting\n\nThe driver erroneously \"lets go\" the mate IDE chip in init_setup_pdc20270()\nwhen ide_setup_pci_devices() call succeeds -- fix this, and drop a couple of\nuseless assignments in this function while at it...\n\nBart: keep \"findev\" variable initialization to silence gcc\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "0505b55fb51fa289027f33ae793995c191277536", "tree": "b6d4d6d7af1ce177f61e93e0fa9878c1a3199a44", "parents": [ "dc4b6fd620aec395048b2877daca87ba7bfcd5e0" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Tue Sep 11 22:28:34 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Sep 11 22:28:34 2007 +0200" }, "message": "ide: fix PCI refcounting\n\nThe IDE core never marked the PCI IDE devices as being in use after succesfull\ndriver probe call (the devices were marked in use only while being probed), and\nso was susceptible to issues caused by unsolicited PCI hotplug device removal.\nSo, add pci_dev_get() call to ide_scan_pcidev() and convert this function to\nthe kernel style, also dropping a bunch of useless curly braces from its caller,\nide_scan_pcibus() and somewhat beautifying printk() call there, while at it...\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "dc4b6fd620aec395048b2877daca87ba7bfcd5e0", "tree": "a2d00a7384c4cba894977fe571f5ecb8b0a90ba3", "parents": [ "0d4cbb5e7f60b2f1a4d8b7f6ea4cc264262c7a01" ], "author": { "name": "Kumar Gala", "email": "galak@kernel.crashing.org", "time": "Tue Sep 11 22:28:33 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Sep 11 22:28:33 2007 +0200" }, "message": "mpc8xx: Only build mpc8xx on arch/ppc\n\nCurrently the mpc8xx ide driver will only work on arch/ppc so only\nallow it to be built there. Also, killed a minor include that isn\u0027t\nactually used by the driver.\n\nSigned-off-by: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\nCc: Paul Mackerras \u003cpaulus@samba.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b311ec4ae82b1dc337689e966dcf9c5f6a53877e", "tree": "e68a24c76834aa66f86cca3f8b5744395d14c74e", "parents": [ "bce7d5e0e1fc0c1f1251b7f21a19cb48207408b6" ], "author": { "name": "Joseph Chan", "email": "josephchan@via.com.tw", "time": "Mon Sep 10 22:06:01 2007 -0400" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Mon Sep 10 22:06:01 2007 -0400" }, "message": "[libata, IDE] add new VIA bridge to VIA PATA drivers\n\nSigned-off-by: Joseph Chan \u003cjosephchan@via.com.tw\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "b0244a00451c1ad64bf0a51f50679f7146786780", "tree": "14f7725795ba27712a6d76820dde336ad6a17ef8", "parents": [ "76e1faa7cfd464fa06a9c2cafd633d643daafeae" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:57 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:57 2007 +0200" }, "message": "ide-disk: workaround for buggy HPA support on ST340823A (take 3)\n\nThis disk reports total number of sectors instead of maximum sector address\nin response to READ_NATIVE_MAX_ADDRESS command and also happily accepts\nSET_MAX_ADDRESS command with the bogus value. This results in +1 sector\ncapacity being used and errors on attempts to use the last sector.\n\n...\nhdd: Host Protected Area detected.\n        current capacity is 78165360 sectors (40020 MB)\n        native  capacity is 78165361 sectors (40020 MB)\nhdd: Host Protected Area disabled.\n...\nhdd: reading: block\u003d78165360, sectors\u003d1, buffer\u003d0xc1e63000\nhdd: dma_intr: status\u003d0x51 { DriveReady SeekComplete Error }\nhdd: dma_intr: error\u003d0x10 { SectorIdNotFound }, LBAsect\u003d78165360, sector\u003d78165360\n...\n\nAdd hpa_list[] table and workaround the issue in idedisk_check_hpa().\n\nv2:\n* Add missing export and improve patch description a bit.\n\nv3:\n* Add list termination. (From Mikko)\n\nFixes kernel bugzilla bug #8816.\n\nThanks to Mikko for investigating the issue and helping with this patch.\n\nCc: Mikko Rapeli \u003cmikko.rapeli@iki.fi\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "76e1faa7cfd464fa06a9c2cafd633d643daafeae", "tree": "1061d01662114d064e60cc29611ab330c900f89e", "parents": [ "88b47040f8365ad56ecfd4103e964ba9b695987e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:57 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:57 2007 +0200" }, "message": "hpt34x: fix CONFIG_HPT34X_AUTODMA\u003dn handling\n\nProgramming DMA mode may destroy current PIO mode setting so if\nCONFIG_HPT34X_AUTODMA\u003dn (the default case) make ide_tune_dma() fail\nearly by disabling all host DMA masks and re-tune PIO mode.\n\nThis fix doesn\u0027t help with the driver being broken but is needed\nfor some other changes.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "88b47040f8365ad56ecfd4103e964ba9b695987e", "tree": "861e91d67f275cbeaed2beb34a5d705a40dbdae2", "parents": [ "e98d6e50be87c1ad2df81f73c7442cf631d6f931" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:56 2007 +0200" }, "message": "triflex: add missing -\u003edma_base check\n\nIf -\u003edma_base is not set (\u003d\u003d PCI BAR4 cannot be reserved) then DMA hooks\nshouldn\u0027t be initialized or bad things will happen.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "e98d6e50be87c1ad2df81f73c7442cf631d6f931", "tree": "111a6349924c3dbe37baac19d002faca26610d3c", "parents": [ "01cc643ae3c7de35b63989b7b65e3ef3132e48e4" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:56 2007 +0200" }, "message": "pdc202xx_old: add missing -\u003edma_base check\n\nIf -\u003edma_base is not set (\u003d\u003d PCI BAR4 cannot be reserved) then DMA hooks\nshouldn\u0027t be initialized or bad things will happen.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "01cc643ae3c7de35b63989b7b65e3ef3132e48e4", "tree": "65f90e393855ff1a457680040df7b5d6b36e0d54", "parents": [ "f7b0d2df2f6fd9abdf47b4a1965dcaa2870e35df" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:56 2007 +0200" }, "message": "pdc202xx_new: add missing -\u003edma_base check\n\nIf -\u003edma_base is not set (\u003d\u003d PCI BAR4 cannot be reserved) then DMA hooks\nshouldn\u0027t be initialized or bad things will happen.\n\nAlso this host driver requires valid PCI BAR4 for normal operation so\ncheck it in -\u003einit_chipset and fail initialization if not set.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f7b0d2df2f6fd9abdf47b4a1965dcaa2870e35df", "tree": "9aad5394bba6ae8acb6769a789f31ef78c0b9028", "parents": [ "adcd33d41bfea8fb6870cf1f7e7ed2e5f7323fc1" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:56 2007 +0200" }, "message": "cs5530: add missing -\u003edma_base check\n\nIf -\u003edma_base is not set (\u003d\u003d PCI BAR4 cannot be reserved) then DMA hooks\nshouldn\u0027t be initialized or bad things will happen.\n\nAlso this host driver requires valid PCI BAR4 for normal operation so\ncheck it in -\u003einit_chipset and fail initialization if not set.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "adcd33d41bfea8fb6870cf1f7e7ed2e5f7323fc1", "tree": "5e5694c40371b67317e124b5801f4ceb4c6d4a31", "parents": [ "a5b7e70d787f528386eda025d3e38f545017f241" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:56 2007 +0200" }, "message": "ide: ide_config_drive_speed() bugfixes\n\n* Use -\u003eOUTBSYNC instead of -\u003eOUTB when writing command register\n (needed for scc_pata and pmac host drivers).\n\n* Don\u0027t check DRDY bit of the status register on ATAPI devices\n (ATAPI devices are free to ignore DRDY bit).\n\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nCc: Kou Ishizaki \u003ckou.ishizaki@toshiba.co.jp\u003e\nCc: Akira Iguchi \u003cakira2.iguchi@toshiba.co.jp\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "a5b7e70d787f528386eda025d3e38f545017f241", "tree": "8cef80801bebf9b9d87ae97420b92f15ad3472f3", "parents": [ "59785c8fe23ca2f432bc41ef473a8933ab435812" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:56 2007 +0200" }, "message": "ide: add cable detection for early UDMA66 devices (take 3)\n\n* Move ide_in_drive_list() from ide-dma.c to ide-iops.c.\n\n* Add ivb_list[] table for listening early UDMA66 devices which don\u0027t conform\n to ATA4 standard wrt cable detection (bit14 is zero, only bit13 is valid)\n and use only device side cable detection for them since host side cable\n detection may be unreliable.\n\n* Add model \"QUANTUM FIREBALLlct10 05\" with firwmare \"A03.0900\" to the list\n (from Craig\u0027s bugreport).\n\nv2:\n* Improve kernel message basing on suggestion from Sergei.\n\nv3:\n* Don\u0027t print kernel message when no device side cable detection is done,\n plus some minor fixes. (Noticed by Sergei)\n\nThanks to Craig for testing this patch.\n\nCc: Craig Block \u003cchblock3@yahoo.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "59785c8fe23ca2f432bc41ef473a8933ab435812", "tree": "99ac4bce8a4583dab32e248a61c2778ba7ea6dc4", "parents": [ "1116fae5fdfa80c6744a9b5d75fb3ef687a69b19" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:55 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:55 2007 +0200" }, "message": "ide-pmac: fix drive-\u003einit_speed reporting\n\npmac_ide_tune_chipset() don\u0027t set drive-\u003einit_speed.\n\nFix it by setting drive-\u003e{current,init}_speed in pmac_ide_do_setfeature()\nand clean up pmac_ide_{tune_chipset,mdma_enable,udma_enable}().\n\nAcked-by: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1116fae5fdfa80c6744a9b5d75fb3ef687a69b19", "tree": "baac86f015f51f1f257219f154a86a08f8529385", "parents": [ "8292e8c7e4c2b99f22120f677858487de43c484b" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:55 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:55 2007 +0200" }, "message": "ide: config_drive_for_dma() fixes\n\n* Add DMA blacklist checking (-\u003eide_dma_on check probably can go now).\n\n* Add -\u003eatapi_dma flag checking and remove no longer needed\n ns87415_ide_dma_check() from ns87415 host driver.\n\n* Remove now needless __ide_dma_check() wrapper and symbol export.\n\n* Check drive-\u003eautodma instead of hwif-\u003eautodma (there should be no changes in\n behavior as all users of config_drive_for_dma() set both -\u003eautodma flags).\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8292e8c7e4c2b99f22120f677858487de43c484b", "tree": "e5d46827b4d63a5b6f86e31d177f0a8bb46fd535", "parents": [ "2195dadf853bb32262bd2e5a64f517ae45698c55" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:54 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:54 2007 +0200" }, "message": "ide-cris: fix -\u003eset_pio_mode method to set transfer mode on the device\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2195dadf853bb32262bd2e5a64f517ae45698c55", "tree": "b0a13a944591ffd1d8f578e7995559c5afb92324", "parents": [ "82a0e70e795ee605e1a34a874dd3a3a43b745fb9" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:54 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:54 2007 +0200" }, "message": "ide: fix hidden dependencies on CONFIG_IDE_GENERIC\n\nSome host drivers depend on CONFIG_IDE_GENERIC to do the probing but their\nconfig options lack explicit dependencies on IDE_GENERIC. In the long-term\nthese host drivers should be fixed to do the probing themselves but for now\nfix them by making their config options select CONFIG_IDE_GENERIC.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "82a0e70e795ee605e1a34a874dd3a3a43b745fb9", "tree": "40be0636c9f1d622a3040070f826d41e6bde997d", "parents": [ "2a67789618abb74f0f97d4836a2b937bff2f1b2d" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Mon Aug 20 22:42:53 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Aug 20 22:42:53 2007 +0200" }, "message": "ide: make CONFIG_IDE_GENERIC default to N\n\nThese days, CONFIG_IDE_GENERIC causes more confusion and\nmisconfiguration than it helps. Especially so because libata is\nlinked after the generic driver. Default to N.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nAcked-by: Jeff Garzik \u003cjeff@garzik.org\u003e\nCc: \"P.C.Chan\" \u003cpc.chan@alcatel-lucent.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "3fcece66911c9d485c1e2050ba033fde607b5130", "tree": "7acbc24ea7a51f8cd78efa36c3125c865e5bdf4f", "parents": [ "0c8de52d76e4bec6e9168b47be29f11b3bb92768" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:46 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:46 2007 +0200" }, "message": "scc_pata: PIO fixes\n\n* Use pio \u003d\u003d 255 \u003d\u003d \"auto-tune\" in scc_config_drive_for_dma() instead of\n forcing PIO4 on PIO fallback. Fix comment while at it.\n\n* Rename scc_tuneproc() to scc_tune_pio() and add scc_tuneproc() wrapper.\n Move finding of the best PIO mode and setting of transfer mode on the device\n to the new wrapper.\n\n* Fix scc_tune_chipset() to tune PIO modes. Do a small cleanup while at it.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "0c8de52d76e4bec6e9168b47be29f11b3bb92768", "tree": "8017e7a07d2d63cf28c35e094944e67022957730", "parents": [ "8b6b33be3280fd776335079124ecd176e6a40797" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:46 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:46 2007 +0200" }, "message": "piix/slc90e66: fix PIO1 handling in -\u003espeedproc method (take 2)\n\n* Don\u0027t call {piix,slc90e66}_dma_2_pio() for PIO modes in\n {piix,slc90e66}_tune_chipset().\n\n* Add PIO1 handling to {piix,slc90e66}_tune_chipset().\n\n* Bump driver version. \n\nv2:\n* Remove PIO modes from {piix,slc90e66}_dma_2_pio(), they are no longer needed\n there (Noticed by Sergei)\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8b6b33be3280fd776335079124ecd176e6a40797", "tree": "74dc598c4e2f94b38ed49c01dcde812a01f5f664", "parents": [ "68aaf8150308dbf9d0e5ccd5bc05491ba575f966" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:46 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:46 2007 +0200" }, "message": "jmicron: PIO fixes\n\n* Set transfer mode on the device in jmicron_tuneproc(),\n also add pio \u003d\u003d 255 \u003d\u003d \"auto-tune\" handling.\n\n* Use jmicron_tuneproc() in jmicron_config_drive_for_dma().\n\n* Remove no longer needed config_jmicron_chipset_for_pio().\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "68aaf8150308dbf9d0e5ccd5bc05491ba575f966", "tree": "8aa823c1f27b51b5c683b677182fcefe97bdb0dd", "parents": [ "bc0b0b5c4bab02790937c9070a7701ee70feaac9" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:46 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:46 2007 +0200" }, "message": "it8213: PIO fixes (take 2)\n\n* Rename it8213_tuneproc() to it8213_tune_pio() and add it8213_tuneproc()\n wrapper. Move finding of the best PIO mode to the new wrapper.\n\n* Add setting of transfer mode on the device to it8213_tuneproc().\n\n* Don\u0027t call it8213_dma_2_pio() for PIO modes in it8213_tune_chipset().\n\n* Use it8213_tuneproc() in it8213_config_drive_for_dma().\n\nv2:\n* Remove PIO modes from it8213_dma_2_pio(), they are no longer needed there\n (Noticed by Sergei)\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "bc0b0b5c4bab02790937c9070a7701ee70feaac9", "tree": "3dc9de74ba1c70df025ab8824fe1fcc79101380b", "parents": [ "070224339b52f0e4f8e6c991a5ad9630a7a9e6da" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:45 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:45 2007 +0200" }, "message": "cs5535: PIO fixes\n\n* Fix cs5535_tuneproc() to pass PIO transfer mode value instead of PIO mode\n number to cs5535_set_speed() (fixes random PIO timings being programmed\n and a possible OOPS). Do a little cleanup while at it.\n\n* Fix cs5535_set_speed() to check if the mate device is present (fixes PIO0\n taskfile timings being used if there is no other device on the cable).\n\n* Use cs5535_tuneproc() in cs5535_dma_check(). The old code had the same\n issue as cs5535_tuneproc() and add additionally caused 0x00-0x04 transfer\n mode values (\u003d\u003d default PIO, default PIO w/ IORDY + two invalid values)\n being set on the device instead of values 0x08-0x0c (XFER_PIO_[0,4]).\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "070224339b52f0e4f8e6c991a5ad9630a7a9e6da", "tree": "a59a74a0c4874e788ff34734eb693ca283bb0c39", "parents": [ "41ead3c918f48710ca1e03eb7b770eabcbbd260b" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:45 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:45 2007 +0200" }, "message": "cs5520: fix PIO auto-tuning in -\u003eide_dma_check method\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "cc60d8baa35c995bf8c40a9730b894993ddb43b9", "tree": "79bb2801dd644a3450352e6b92b44be771e36d2b", "parents": [ "ab0579685d34eb2c6b101534796ba64c8b9107b5" ], "author": { "name": "Mariusz Kozlowski", "email": "m.kozlowski@tuxland.pl", "time": "Wed Aug 01 23:46:44 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:44 2007 +0200" }, "message": "drivers/ide/arm/icside.c: kmalloc + memset conversion to kzalloc\n\nIs this a bug? In original verison memset cleared sizeof(state) bytes\ninstead of sizeof(*state). If it was intentional then this patch is invalid.\nIf not intentional -\u003e valid :) Please review.\n\nBart: Yes, it is a bug so this patch is a valid bugfix. :-)\n\n drivers/ide/arm/icside.c | 18883 -\u003e 18849 (-34 bytes)\n\nSigned-off-by: Mariusz Kozlowski \u003cm.kozlowski@tuxland.pl\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ab0579685d34eb2c6b101534796ba64c8b9107b5", "tree": "e7d81b706c647732e918decc75d948763d339b41", "parents": [ "b37c6b842b30fc8e90965ec242f624283d0032a3" ], "author": { "name": "Stephen Rothwell", "email": "sfr@canb.auug.org.au", "time": "Wed Aug 01 23:46:44 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:44 2007 +0200" }, "message": "ide: eliminate warnings in ide-tape.c\n\ndrivers/ide/ide-tape.c: In function \u0027__idetape_kmalloc_stage\u0027:\ndrivers/ide/ide-tape.c:2588: warning: large integer implicitly truncated to unsigned type\ndrivers/ide/ide-tape.c:2616: warning: large integer implicitly truncated to unsigned type\n\nb_size in struct idetape_bh is an unsigned short. We sometimes assigne\nPAGE_SIZE to it and PAGE_SIZE can be 64K or larger, so make it a u32.\n\nSigned-off-by: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b37c6b842b30fc8e90965ec242f624283d0032a3", "tree": "bce345d4b8e00224d9ef4360b0b70840b45b1de7", "parents": [ "1955f6814fb58ffa06af4873a445307d60b23fb1" ], "author": { "name": "Meelis Roos", "email": "mroos@linux.ee", "time": "Wed Aug 01 23:46:44 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:44 2007 +0200" }, "message": "ide: fix runtogether printk\u0027s in cmd64x IDE driver\n\nFix a couple of runtogether printks in cmd64x.c IDE driver by adding \nproper newlines.\n\nSigned-off-by: Meelis Roos \u003cmroos@linux.ee\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1955f6814fb58ffa06af4873a445307d60b23fb1", "tree": "944141b505c68e286450a76056b1c7b2abdcc186", "parents": [ "8663fd6d0de7144c9e8455b733aeb38fe80788ed" ], "author": { "name": "David Lamparter", "email": "equinox@diac24.net", "time": "Wed Aug 01 23:46:44 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:44 2007 +0200" }, "message": "sis5513: Add FSC Amilo A1630 PCI subvendor/dev to laptops\n\nRecognise the FSC Amilo A1630\u0027s incarnation of a SiS5513 chip as laptop to\nget UDMA100 support.\n\nSigned-off-by: David Lamparter \u003cequinox@diac24.net\u003e\nCc: Lionel Bouton \u003cLionel.Bouton@inet6.fr\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8663fd6d0de7144c9e8455b733aeb38fe80788ed", "tree": "23068a6480c838c2993cc24d6b2c9c67c9a88d80", "parents": [ "32a70a817acbb96fcfcc7543932222467c771207" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:43 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:43 2007 +0200" }, "message": "alim15x3: Correct HP detect\n\nDirect port of Alan\u0027s fix for pata_ali.\n\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "32a70a817acbb96fcfcc7543932222467c771207", "tree": "9595b9920f97032a3f2c473c9a2479fd9e66ea6c", "parents": [ "8d4fbcfbe0a4bfc73e7f0297c59ae514e1f1436f" ], "author": { "name": "Jordan Crouse", "email": "jordan.crouse@amd.com", "time": "Wed Aug 01 23:46:42 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Aug 01 23:46:42 2007 +0200" }, "message": "ide: Fix an overrun found in the CS5535 IDE driver\n\nAs found by the Coverity checker, and reported by Adrian Bunk, this\nfixes a overrun error in the CS5535 IDE driver. Somebody got a little\nexcited with the if() statement - the CS5535 only supports UDMA 0-4.\n\nBart:\nNot a bug per se since the upper layer will never feed this function\nwith speed \u003e XFER_UDMA_4 (thanks to -\u003eultra_mask being set to 0x1f).\n\nWorth fixing anyway.\n\nSigned-off-by: Jordan Crouse \u003cjordan.crouse@amd.com\u003e\nCc: Adrian Bunk \u003cbunk@stusta.de\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "99eb8a550dbccc0e1f6c7e866fe421810e0585f6", "tree": "130c6e3338a0655ba74355eba83afab9261e1ed0", "parents": [ "0d0ed42e5ca2e22465c591341839c18025748fe8" ], "author": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Tue Jul 31 00:38:19 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue Jul 31 15:39:39 2007 -0700" }, "message": "Remove the arm26 port\n\nThe arm26 port has been in a state where it was far from even compiling\nfor quite some time.\n\nIan Molton agreed with the removal.\n\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\nCc: Ian Molton \u003cspyro@f2s.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "0bd8496b5977f6acfd3c16358045c315d610b765", "tree": "a76b71c6eeacc12fd79ffc3b1fdcf330b26907a0", "parents": [ "ad690ef9e690f6c31f7d310b09ef1314bcec9033" ], "author": { "name": "Al Viro", "email": "viro@ftp.linux.org.uk", "time": "Thu Jul 26 17:36:09 2007 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Jul 26 11:11:57 2007 -0700" }, "message": "drivers/ misc __iomem annotations\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "165125e1e480f9510a5ffcfbfee4e3ee38c05f23", "tree": "8009c8a5ff09e26dc2418d42f66ecafb055c52a2", "parents": [ "f695baf2df9e0413d3521661070103711545207a" ], "author": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Tue Jul 24 09:28:11 2007 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Tue Jul 24 09:28:11 2007 +0200" }, "message": "[BLOCK] Get rid of request_queue_t typedef\n\nSome of the code has been gradually transitioned to using the proper\nstruct request_queue, but there\u0027s lots left. So do a full sweet of\nthe kernel and get rid of this typedef and replace its uses with\nthe proper type.\n\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "88f8bb780e13fd31f207e1752ee8624dc786381f", "tree": "b2504dfba3a3e0a0d6c2502b7bae9d981be708d5", "parents": [ "7e5de05169b766b86b4bc7c196f53d57e1952bff" ], "author": { "name": "Al Viro", "email": "viro@ftp.linux.org.uk", "time": "Fri Jul 20 04:33:18 2007 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Fri Jul 20 08:24:49 2007 -0700" }, "message": "m68k: missing exports\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "89636af25d75d8672aea05d258be357d0dc4bd70", "tree": "dc1960bb144f76c75e82928ed3d601b52a275999", "parents": [ "4bf9fdf7f21f118e2c5052ec8e46faf00eb5a4ea" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "message": "ide: add support for SCSI ioctls to ide-floppy\n\nNow that ide-floppy supports SG_IO we can add support for SCSI ioctls\n(except deprecated SCSI_IOCTL_SEND_COMMAND and legacy CDROM_SEND_PACKET\nones - we can add them later iff really needed).\n\nWhile at it remove handling of CDROMEJECT and CDROMCLOSETRAY ioctls from\ngeneric_ide_ioctl():\n\n- This prevents ide-{disk,tape,scsi} device drivers from obtaining\n REQ_TYPE_BLOCK_PC type requests which are currently unsupported by\n these drivers and which are potentially harmful (as reported by Andrew).\n\n- There is no functionality loss since aforementioned ioctls will now be\n handled by idefloppy_ioctl()-\u003escsi_cmd_ioctl() (for devices using\n ide-floppy driver) and by idecd_ioctl-\u003ecdrom_ioctl()-\u003escsi_cmd_ioctl()\n (for devices using ide-cd driver).\n\nCc: Jens Axboe \u003cjens.axboe@oracle.com\u003e\nCc: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nCc: James Bottomley \u003cJames.Bottomley@steeleye.com\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4bf9fdf7f21f118e2c5052ec8e46faf00eb5a4ea", "tree": "6d7941d54886bc78929f85c726a33756deeee2e5", "parents": [ "74565073cbf6b3c1746ee623e97b2ba0fcd3fbb6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "message": "ide: remove stale changelog from setup-pci.c\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "74565073cbf6b3c1746ee623e97b2ba0fcd3fbb6", "tree": "8259a8e42a668e12e5e348a24945e5818583226e", "parents": [ "d281e9ad87f79fd01ce1fc2d2f258e2ee765bc5a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "message": "ide: remove stale changelog/comments/TODO from ide.c\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "d281e9ad87f79fd01ce1fc2d2f258e2ee765bc5a", "tree": "4b498af97d73599d7f2b4ed350ef03bb7908a377", "parents": [ "4099d14322149c7a467e4997b87be4ba8eb78697" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "message": "ide-cris: handle PIO auto-tuning in tune_cris_ide()\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4099d14322149c7a467e4997b87be4ba8eb78697", "tree": "133a913d7f9c2dacaaaef5cfdf2ae6911dc21f4c", "parents": [ "6a824c92db4d606c324272c4eed366fb71672440" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:59 2007 +0200" }, "message": "ide: add PIO masks\n\n* Add ATA_PIO[0-6] defines to \u003clinux/ata.h\u003e.\n\n* Add -\u003epio_mask field to ide_pci_device_t and ide_hwif_t.\n\n* Add PIO masks to host drivers.\n\n\u003clinux/ata.h\u003e change ACK-ed by Jeff Garzik \u003cjeff@garzik.org\u003e.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6a824c92db4d606c324272c4eed366fb71672440", "tree": "72b398062fd582b85507b665120f0a5315548eaf", "parents": [ "2134758d2a5429325cee4d4ce8959af5314eeba1" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:58 2007 +0200" }, "message": "ide: remove ide_find_best_pio_mode()\n\n* Add -\u003ehost_flags to ide_hwif_t to store ide_pci_device_t.host_flags,\n assign it in setup-pci.c:ide_pci_setup_ports().\n\n* Add IDE_HFLAG_PIO_NO_{BLACKLIST,DOWNGRADE} to ide_pci_device_t.host_flags\n and teach ide_get_best_pio_mode() about them. Also remove needless\n !drive-\u003eid check while at it (drive-\u003eid is always present).\n\n* Convert amd74xx, via82cxxx and ide-timing.h to use ide_get_best_pio_mode()\n and then remove no longer needed ide_find_best_pio_mode().\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2134758d2a5429325cee4d4ce8959af5314eeba1", "tree": "cc0d1326c04522e70c1f52598c9aba29aa85170f", "parents": [ "e5fa4b2968ff0f32b5ecfa082fd6db50b731055e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:58 2007 +0200" }, "message": "ide: drop \"PIO data\" argument from ide_get_best_pio_mode()\n\n* Drop no longer needed \"PIO data\" argument from ide_get_best_pio_mode()\n and convert all users accordingly.\n\n* Remove no longer needed ide_pio_data_t.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "e5fa4b2968ff0f32b5ecfa082fd6db50b731055e", "tree": "096ecacb0c3b93c79f5a39899490acacbb2e11d7", "parents": [ "7dd00083b1160b560fa2a0a486799b57baa5d035" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:57 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:57 2007 +0200" }, "message": "ide: ide_find_best_pio_mode() fixes (take 2)\n\n* Check IORDY bit for PIO modes \u003e 2.\n\n* Some devices claim maximum PIO mode \u003e 2 in id-\u003etPIO, they were punished too\n severly for this by being limited to PIO_SLOW. Limit them to PIO2 instead.\n\nv2:\n* Fix PIO number being returned incorrectly instead of PIO mode\n (Noticed by Sergei).\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "7dd00083b1160b560fa2a0a486799b57baa5d035", "tree": "22e8cf2c740d55ff9b4fdf57b9593a357d0092b7", "parents": [ "31c4df441cce6b9ec541e7f722f50bfbc617dd76" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:56 2007 +0200" }, "message": "ide: add ide_pio_cycle_time() helper (take 2)\n\n* Add ide_pio_cycle_time() helper.\n\n* Use it in ali14xx/ht6560b/qd65xx/cmd64{0,x}/sl82c105 and pmac host drivers\n (previously cycle time given by the device was only used for \"pio\" \u003d\u003d 255).\n\n* Remove no longer needed ide_pio_data_t.cycle_time field.\n\nv2:\n* Fix \"ata_\" prefix (Noticed by Jeff).\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "31c4df441cce6b9ec541e7f722f50bfbc617dd76", "tree": "c1b617168a9edd7d23c2ba3b3fc23acb0235bd89", "parents": [ "8987d21ba6a426b0685257866ce366055930b57f" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:56 2007 +0200" }, "message": "sc1200: remove stale Power Management code\n\n* Nowadays core IDE code handles restoring of PIO and DMA modes\n (ide-io.c:ide_start_power_step() etc) so remove open-coded version\n from sc1200_resume().\n\n There should be no change in behavior because settings done by\n sc1200_resume() were always overridden by generic_ide_resume()\n and ide_{start,stop}_power_step().\n\n* Bump driver version.\n\nCc: Mark Lord \u003cmlord@pobox.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "8987d21ba6a426b0685257866ce366055930b57f", "tree": "5404c550d3687c70857311d2b4e170838f0fabf5", "parents": [ "1c164acf50146d8a82caed642951390e073620f1" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:56 2007 +0200" }, "message": "ide: ide_start_power_step() fix WRT disabling DMA\n\n* Do the same thing as probe_hwif() and always disable DMA so chipset DMA\n enabled bit gets cleared (if the drive doesn\u0027t support DMA ide_set_dma()\n won\u0027t try to tune it anyway).\n\n* Add TODO comment about respecting -\u003eusing_dma setting.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1c164acf50146d8a82caed642951390e073620f1", "tree": "b83f3f02719406dfd9bdd477c9a03bfa4bd747b4", "parents": [ "1880a8d7f2d0587e657e3292166003636067b7ea" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:56 2007 +0200" }, "message": "serverworks: fix DMA\n\nThe driver used to depend on BIOS settings for deciding whether it is OK\nto use DMA. However it seems that BIOS doesn\u0027t always handle all cases\ncorrectly so just let IDE core to decide about this. It should be a safe\nthing to do now, after the driver went through heavy bugfixing.\n\nThanks for bugreport and testing the patch goes out to Sven Niedner.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1880a8d7f2d0587e657e3292166003636067b7ea", "tree": "94ab0c3404fb45f73fc18dc2fa8d6ab268c9b803", "parents": [ "a5d8c5c834d3cabf4b7b477c3f6ee923c25026fc" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:56 2007 +0200" }, "message": "serverworks: always tune PIO\n\n* Always set -\u003eautotune so PIO gets correctly auto-tuned (previously\n -\u003eautotune was only set when -\u003edma_base wasn\u0027t available, however\n -\u003eide_dma_check()/-\u003espeedproc() was always trying to tune PIO when\n tuning DMA).\n\n* Move code responsible for programming chipset for PIO mode from\n svwks_tune_chipset() to svwks_tune_pio(). Don\u0027t tune PIO when tuning\n DMA (this is no longer needed since -\u003eautotune is always set now).\n\n* Handle PIO modes early in svwks_tune_chipset() so DMA configuration\n registers don\u0027t get cleared when programming PIO mode.\n\n* Bump driver version.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "a5d8c5c834d3cabf4b7b477c3f6ee923c25026fc", "tree": "19fc04470569a3c2f227d5aac3078a15ac65bb32", "parents": [ "2229833c1365346b64357a9263fa724f74f5e376" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:55 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:55 2007 +0200" }, "message": "ide: add ide_pci_device_t.host_flags (take 2)\n\n* Rename ide_pci_device_t.flags to ide_pci_device_t.host_flags\n and IDEPCI_FLAG_ISA_PORTS flag to IDE_HFLAG_ISA_PORTS.\n\n* Add IDE_HFLAG_SINGLE flag for single channel devices.\n\n* Convert core code and all IDE PCI drivers to use IDE_HFLAG_SINGLE\n and remove no longer needed ide_pci_device_t.channels field.\n\nv2:\n* Fix issues noticed by Sergei:\n - correct code alignment in scc_pata.c\n - s/IDE_HFLAG_SINGLE/~IDE_HFLAG_SINGLE/ in serverworks.c\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "2229833c1365346b64357a9263fa724f74f5e376", "tree": "50f06ee86c940ef415561e548dabaaafd81a49a3", "parents": [ "342cdb6d4739cee430efc3eafcacd1605db66036" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:55 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:55 2007 +0200" }, "message": "ide: add ide_dev_has_iordy() helper (take 4)\n\n* Add ide_dev_has_iordy() helper and use it sl82c105 host driver.\n\n* Remove no longer needed ide_pio_data_t.use_iordy field.\n\nv2/v3:\n* Fix issues noticed by Sergei:\n - correct patch description\n - fix comment in ide_get_best_pio_mode()\n\nv4:\n* Fix \"ata_\" prefix (Noticed by Jeff).\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "342cdb6d4739cee430efc3eafcacd1605db66036", "tree": "f09b53028467a2f69ad6f0242f8d3b74b32a5af4", "parents": [ "328dcbb63657ebbb2dd26982fa9e1fa9e04b6fa2" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:55 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:55 2007 +0200" }, "message": "ide: make ide_get_best_pio_mode() print info if overriding PIO mode\n\n* Print info about overriding PIO mode in ide_get_best_pio_mode().\n\n* Remove info about overriding PIO mode from cmd64{0,x} host drivers.\n\n* Remove no longer needed ide_pio_data_t.overridden field.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "328dcbb63657ebbb2dd26982fa9e1fa9e04b6fa2", "tree": "902daf365cd6e8ecf559dbc98419140a9d3b6b8f", "parents": [ "485efc6cf507eae2b8e83b56e179c8fa3980641a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:54 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:54 2007 +0200" }, "message": "siimage: PIO mode setup fixes (take 2)\n\n* Add sil_tuneproc() wrapper for siimage_tuneproc() which also sets\n PIO mode on the device.\n\n* Add missing ide_get_best_pio_mode() call to sil_tuneproc() so\n \"pio\" \u003d\u003d 255 (autotune) is handled correctly (previously PIO0 was used)\n and \"pio\" values \u003e 4 \u0026\u0026 \u003c 255 are filtered to PIO4 (instead of PIO0).\n\n* Add code limiting maximum PIO mode according to the pair device capabilities\n to sil_tuneproc().\n\n* Convert users of config_siimage_chipset_for_pio() to use sil_tune_pio() and\n sil_tuneproc(). This fixes PIO fallback in siimage_config_drive_for_dma() to\n use max PIO mode available instead of PIO4 (config_siimage_chipset_for_pio()\n used wrong arguments for ide_get_best_pio_mode() and as a results always\n tried to set PIO4).\n\n* Remove no longer needed siimage_taskfile_timing()\n and config_siimage_chipset_for_pio().\n\n* Enable -\u003eautotune unconditionally and remove PIO tuning for UDMA/MDMA modes\n from siimage_speedproc()\n\n* Bump driver version.\n\nv2:\n* Fix issues noticed by Sergei:\n - correct pair device check\n - trim only taskfile PIO to the slowest of the master/slave\n - enable -\u003eautotune unconditionally and remove PIO tuning for UDMA/MDMA modes\n from siimage_speedproc()\n - add TODO item for IORDY bugs\n - minor cleanups\n\nReviewed-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "485efc6cf507eae2b8e83b56e179c8fa3980641a", "tree": "8295657535efaa740b38ac1e29fbbff7c3c177be", "parents": [ "9702b5d5c26be12d376e1baf2a8e5b82e6c06b66" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:54 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:54 2007 +0200" }, "message": "atiixp: PIO mode setup fixes\n\n* Split off exisiting atiixp_tuneproc() into atiixp_tune_pio()\n and then add setting device PIO mode to atiixp_tuneproc().\n\n* Add missing ide_get_best_pio_mode() call to atiixp_tuneproc() so\n \"pio\" \u003d\u003d 255 (autotune) is handled correctly and \"pio\" values \u003e 4 \u0026\u0026 \u003c 255\n are filtered to PIO4 (previously \"pio\" \u003d\u003d 5 could result in wrong timings\n being used and \"pio\" values \u003e 4 \u0026\u0026 \u003c 255 in an OOPS).\n\n* Handle PIO modes early in atiixp_speedproc() so save_mdma_mode[]\n doesn\u0027t get cleared.\n\n* In atiixp_dma_check():\n - fix max_mode argument for ide_get_best_pio_mode()\n - don\u0027t call atiixp_dma_2_pio() so PIO1 doesn\u0027t get remapped to PIO0\n - use atiixp_tuneproc() instead of atiixp_speedproc()\n\n* Bump driver version.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "9702b5d5c26be12d376e1baf2a8e5b82e6c06b66", "tree": "58e37c85d121fd01c845e2c121d662c8df0a0135", "parents": [ "c82d72f5c521434c36b9550b3ac6601eb8167687" ], "author": { "name": "Alan Cox", "email": "alan@redhat.com", "time": "Fri Jul 20 01:11:54 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:54 2007 +0200" }, "message": "ide: Stop mapping ROMs\n\nVarious old IDE drivers go mapping ROM devices for no apparent reason and\nwithout using the ROM mapping API we now have. They don\u0027t actually use\nthe ROM they map and the new libata drivers are happy without it being\nmapped so rather than port them lets just junk it for the next -rc1.\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "c82d72f5c521434c36b9550b3ac6601eb8167687", "tree": "7f9746f66bf0e97c316b23c0f50c615c2dcb8297", "parents": [ "363f7e428dcf9f90d726481029f7b4a0ed6d55ce" ], "author": { "name": "Robert P. J. Day", "email": "rpjday@mindspring.com", "time": "Fri Jul 20 01:11:54 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:54 2007 +0200" }, "message": "IDE: Remove references to dead ETRAX-related variables.\n\nThe two CONFIG variables\n\n CONFIG_ETRAX_IDE_CSE1_16_RESET\n CONFIG_ETRAX_IDE_CSP0_8_RESET\n\nappear to have been dead since way back in 2.5.xx days:\n\nhttp://www.linuxhq.com/kernel/v2.5/75/arch/cris/drivers/Kconfig\n\nSigned-off-by: Robert P. J. Day \u003crpjday@mindspring.com\u003e\nCc: Michael Starvik \u003cstarvik@axis.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "363f7e428dcf9f90d726481029f7b4a0ed6d55ce", "tree": "be65072737fe8c3a66c6a97e0d64dd82a2d99c7e", "parents": [ "4ae41ff887224b39c3c3c673a918193e90be558f" ], "author": { "name": "Marcin Juszkiewicz", "email": "openembedded@hrw.one.pl", "time": "Fri Jul 20 01:11:53 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:53 2007 +0200" }, "message": "PCMCIA: Add another MemoryCard to ide-cs/pata_pcmcia\n\nOne card submitted by user.\n\nSigned-off-by: Marcin Juszkiewicz \u003copenembedded@hrw.one.pl\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "4ae41ff887224b39c3c3c673a918193e90be558f", "tree": "50ea15b294c108ca0c905b0e411e8ee577e0967f", "parents": [ "f644d47af3834b603d909c212287d0c21ec3ebbb" ], "author": { "name": "Kou Ishizaki", "email": "kou.ishizaki@toshiba.co.jp", "time": "Fri Jul 20 01:11:53 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:53 2007 +0200" }, "message": "scc_pata.c: Workaround for errata A308 (take 2)\n\nWorkaround for errata A308: turn down the UDMA mode and retry\nthe DMA command when the data lost condition is detected.\n\ntake2:\nudma_filter() hook is used to limit ATAPI UDMA mode.\n\nSigned-off-by: Kou Ishizaki \u003ckou.ishizaki@toshiba.co.jp\u003e\nSigned-off-by: Akira Iguchi \u003cakira2.iguchi@toshiba.co.jp\u003e\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f644d47af3834b603d909c212287d0c21ec3ebbb", "tree": "37917436b87390bd8fb162094b8fe3fba7119343", "parents": [ "721e2629fa2167c0e5a9f10d704b1fee1621a8cb" ], "author": { "name": "Kumar Gala", "email": "galak@kernel.crashing.org", "time": "Fri Jul 20 01:11:53 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jul 20 01:11:53 2007 +0200" }, "message": "scc_pata: Use inline function for eieio\n\nMove to using inline function variant of eieio instead of inline assmebly.\n\nSigned-off-by: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\nCc: kou.ishizaki@toshiba.co.jp\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "41e9d344bf52c57ec16648d08618b61d3f1d4bdc", "tree": "7d55fc863731bc669fb9ff1d50ae7c5524ef91d6", "parents": [ "275afcac9953ece0828972edeab9684cfe1a5ef3" ], "author": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Jul 19 08:13:01 2007 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Jul 19 10:22:44 2007 -0700" }, "message": "IDE: fix termination of non-fs requests\n\nide-disk calls\n\n ide_end_request(drive, 0, 0);\n\nto finish an unknown request, but this doesn\u0027t work so well for non-fs\nrequests, since ide_end_request() internally looks at -\u003ehard_cur_sectors\nto see how much data to end. Only file system requests store a transfer\nvalue in there, pc requests fill out -\u003edata_len as a byte based transfer\nvalue instead.\n\nSince we ask to end 0 bytes of that request, it will never be terminated\nand ide-disk gets stuck in a loop \"handling\" that same request over and\nover.\n\nSwitch __ide_end_request() to take a byte based transfer count, and\nadjust ide_end_request() to look at the right field to determine how\nmuch IO to end when it\u0027s being passed in 0.\n\nAcked-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nTested-By: Giacomo Catenazzi \u003ccate@debian.org\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "dd00cc486ab1c17049a535413d1751ef3482141c", "tree": "d90ff69ea06792b9284f2f2665c96624f121b88a", "parents": [ "3b5ad0797c0e4049001f961a8b58f1d0ce532072" ], "author": { "name": "Yoann Padioleau", "email": "padator@wanadoo.fr", "time": "Thu Jul 19 01:49:03 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Jul 19 10:04:50 2007 -0700" }, "message": "some kmalloc/memset -\u003ekzalloc (tree wide)\n\nTransform some calls to kmalloc/memset to a single kzalloc (or kcalloc).\n\nHere is a short excerpt of the semantic patch performing\nthis transformation:\n\n@@\ntype T2;\nexpression x;\nidentifier f,fld;\nexpression E;\nexpression E1,E2;\nexpression e1,e2,e3,y;\nstatement S;\n@@\n\n x \u003d\n- kmalloc\n+ kzalloc\n (E1,E2)\n ... when !\u003d \\(x-\u003efld\u003dE;\\|y\u003df(...,x,...);\\|f(...,x,...);\\|x\u003dE;\\|while(...) S\\|for(e1;e2;e3) S\\)\n- memset((T2)x,0,E1);\n\n@@\nexpression E1,E2,E3;\n@@\n\n- kzalloc(E1 * E2,E3)\n+ kcalloc(E1,E2,E3)\n\n[akpm@linux-foundation.org: get kcalloc args the right way around]\nSigned-off-by: Yoann Padioleau \u003cpadator@wanadoo.fr\u003e\nCc: Richard Henderson \u003crth@twiddle.net\u003e\nCc: Ivan Kokshaysky \u003cink@jurassic.park.msu.ru\u003e\nAcked-by: Russell King \u003crmk@arm.linux.org.uk\u003e\nCc: Bryan Wu \u003cbryan.wu@analog.com\u003e\nAcked-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nCc: Dave Airlie \u003cairlied@linux.ie\u003e\nAcked-by: Roland Dreier \u003crolandd@cisco.com\u003e\nCc: Jiri Kosina \u003cjkosina@suse.cz\u003e\nAcked-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nAcked-by: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\nAcked-by: Pierre Ossman \u003cdrzeus-list@drzeus.cx\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nCc: \"David S. Miller\" \u003cdavem@davemloft.net\u003e\nAcked-by: Greg KH \u003cgreg@kroah.com\u003e\nCc: James Bottomley \u003cJames.Bottomley@steeleye.com\u003e\nCc: \"Antonino A. Daplas\" \u003cadaplas@pol.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "1985026d32e69ed6dac3ba0ef8ff10366f060ed3", "tree": "a355fde028462c4d6ae6cad9090011a73cb566a7", "parents": [ "8b0d4164b4ac151050953d78c97fcceade69eb3c" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue Jul 17 15:57:42 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue Jul 17 15:57:42 2007 -0700" }, "message": "Revert drivers/ide/ide.c scsi_cmd_ioctl() usage changes\n\nThe old IDE driver is not ready to take generic SCSI commands, even if\nit uses them for some specific issues (ie the tray open/close ioctls for\nIDE CD-ROM\u0027s). Pointed out by Bartlomiej.\n\nI\u0027m sure we\u0027ll have it fixed properly soon enough, but for now we should\nnot allow it to cause problems.\n\nCc: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nCc: Jens Axboe \u003cjens.axboe@oracle.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "94f6030ca792c57422f04a73e7a872d8325946d3", "tree": "0197f24d82b1706f1b0521f2cf68feeff64123df", "parents": [ "81cda6626178cd55297831296ba8ecedbfd8b52d" ], "author": { "name": "Christoph Lameter", "email": "clameter@sgi.com", "time": "Tue Jul 17 04:03:29 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Tue Jul 17 10:23:02 2007 -0700" }, "message": "Slab allocators: Replace explicit zeroing with __GFP_ZERO\n\nkmalloc_node() and kmem_cache_alloc_node() were not available in a zeroing\nvariant in the past. But with __GFP_ZERO it is possible now to do zeroing\nwhile allocating.\n\nUse __GFP_ZERO to remove the explicit clearing of memory via memset whereever\nwe can.\n\nSigned-off-by: Christoph Lameter \u003cclameter@sgi.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "45e79a3acdcf54113b3d7b23e9e64e6541dbfeb5", "tree": "b8e7598b26ce446577e162189e635f6b87b10a5b", "parents": [ "7e75d73080d822d2bbbd5b0f7f293719dd1f9109" ], "author": { "name": "FUJITA Tomonori", "email": "fujita.tomonori@lab.ntt.co.jp", "time": "Mon Jul 09 12:39:20 2007 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Mon Jul 16 08:52:45 2007 +0200" }, "message": "bsg: add a request_queue argument to scsi_cmd_ioctl()\n\nbsg uses scsi_cmd_ioctl() for some SCSI/sg ioctl\ncommands. scsi_cmd_ioctl() gets a request queue from a gendisk\narguement. This prevents bsg being bound to SCSI devices that don\u0027t\nhave a gendisk (like OSD). This adds a request_queue argument to\nscsi_cmd_ioctl(). The SCSI/sg ioctl commands doesn\u0027t use a gendisk so\nit\u0027s safe for any SCSI devices to use scsi_cmd_ioctl().\n\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "3d6392cfbd7dc11f23058e3493683afab4ac13a3", "tree": "70c2b65c479f5feb7a5214a4a4930d489a069b1f", "parents": [ "8f41958bdd577731f7411c9605cfaa9db6766809" ], "author": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Mon Jul 09 12:38:05 2007 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Mon Jul 16 08:52:44 2007 +0200" }, "message": "bsg: support for full generic block layer SG v3\n\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "ba5b55d0498bd56b9d60d85c5f654cd7b291e9c8", "tree": "84282851766f3483e41fa744f120798079da83f3", "parents": [ "05bd711ea2862cb1c754903326b7858bc700b2e9" ], "author": { "name": "Al Viro", "email": "viro@ftp.linux.org.uk", "time": "Sun Jul 15 21:01:32 2007 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Sun Jul 15 16:40:52 2007 -0700" }, "message": "icside: devm_iounmap() needs linux/io.h\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\nAcked-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "21ba0f88ae56da82a3a15fe54d729208b64c4f4b", "tree": "17ce67f276fe3ea7284c3dc730bdd6a2ec7dfe2f", "parents": [ "dc690d8ef842b464f1c429a376ca16cb8dbee6ae", "36e235901f90fb83215be43cbd8f1ca14661ea40" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Jul 12 13:40:57 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Jul 12 13:40:57 2007 -0700" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6\n\n* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits)\n PCI: Only build PCI syscalls on architectures that want them\n PCI: limit pci_get_bus_and_slot to domain 0\n PCI: hotplug: acpiphp: avoid acpiphp \"cannot get bridge info\" PCI hotplug failure\n PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge\n PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3\n PCI: hotplug: pciehp: wait for 1 second after power off slot\n PCI: pci_set_power_state(): check for PM capabilities earlier\n PCI: cpci_hotplug: Convert to use the kthread API\n PCI: add pci_try_set_mwi\n PCI: pcie: remove SPIN_LOCK_UNLOCKED\n PCI: ROUND_UP macro cleanup in drivers/pci\n PCI: remove pci_dac_dma_... APIs\n PCI: pci-x-pci-express-read-control-interfaces cleanups\n PCI: Fix typo in include/linux/pci.h\n PCI: pci_ids, remove double or more empty lines\n PCI: pci_ids, add atheros and 3com_2 vendors\n PCI: pci_ids, reorder some entries\n PCI: i386: traps, change VENDOR to DEVICE\n PCI: ATM: lanai, change VENDOR to DEVICE\n PCI: Change all drivers to use pci_device-\u003erevision\n ...\n" }, { "commit": "48dd643c3b02544994fa091573c2242441a7733f", "tree": "a24dfd78310b5182ce2ad314023cd13b16c717bb", "parents": [ "7f1291f2caa536c441507b459f91770a5280fb5d" ], "author": { "name": "H. Peter Anvin", "email": "hpa@zytor.com", "time": "Wed Jul 11 12:18:27 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Jul 12 10:55:54 2007 -0700" }, "message": "hd.c: remove BIOS/CMOS queries\n\nAn ST-506 disk these days is pretty much someone trying to pull ancient\ndata using an auxilliary controller. Pulling data from the BIOS or CMOS\nis just plain wrong, since it\u0027s likely to be the primary OS disk... and\nwould be user-entered data anyway. Instead, require the user enters it\non the command line.\n\nSigned-off-by: H. Peter Anvin \u003chpa@zytor.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "694625c0b322905d6892fad873029f764cd4823f", "tree": "c48ac2c0095f2ac4044bd12b27ea318eb6156c73", "parents": [ "f5609d7e679db3f29433f56e1f2e397a2f815288" ], "author": { "name": "Randy Dunlap", "email": "randy.dunlap@oracle.com", "time": "Mon Jul 09 11:55:54 2007 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Wed Jul 11 16:02:11 2007 -0700" }, "message": "PCI: add pci_try_set_mwi\n\nAs suggested by Andrew, add pci_try_set_mwi(), which does not require\nreturn-value checking.\n\n- add pci_try_set_mwi() without __must_check\n- make it return 0 on success, errno if the \"try\" failed or error\n- review callers\n\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "44c10138fd4bbc4b6d6bff0873c24902f2a9da65", "tree": "6e16d3ec80c87490dc743f72da086356f2906ace", "parents": [ "b8a3a5214d7cc115f1ca3a3967b7229d97c46f4a" ], "author": { "name": "Auke Kok", "email": "auke-jan.h.kok@intel.com", "time": "Fri Jun 08 15:46:36 2007 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Wed Jul 11 16:02:10 2007 -0700" }, "message": "PCI: Change all drivers to use pci_device-\u003erevision\n\nInstead of all drivers reading pci config space to get the revision\nID, they can now use the pci_device-\u003erevision member.\n\nThis exposes some issues where drivers where reading a word or a dword\nfor the revision number, and adding useless error-handling around the\nread. Some drivers even just read it for no purpose of all.\n\nIn devices where the revision ID is being copied over and used in what\nappears to be the equivalent of hotpath, I have left the copy code\nand the cached copy as not to influence the driver\u0027s performance.\n\nCompile tested with make all{yes,mod}config on x86_64 and i386.\n\nSigned-off-by: Auke Kok \u003cauke-jan.h.kok@intel.com\u003e\nAcked-by: Dave Jones \u003cdavej@redhat.com\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "e654bc4393e85e326993256d80b9710a4d6411ff", "tree": "bf30413fd62f778e4c9abd8bc92e7a399ac37e53", "parents": [ "9cff3b383dad193b0762c27278a16237e10b53dc" ], "author": { "name": "Boaz Harrosh", "email": "bharrosh@panasas.com", "time": "Wed Jun 20 13:53:23 2007 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Tue Jul 10 08:03:34 2007 +0200" }, "message": "[PATCH] fix request-\u003ecmd \u003d\u003d INT cases\n\n - I have unearthed very old bugs in stale drivers that still\n used request-\u003ecmd as a READ|WRITE int\n - This patch is maybe a proof that these drivers have not been\n used for a long time. Should they be removed completely?\n\nDrivers that currently do not work for sure:\n drivers/acorn/block/fd1772.c | 2 +-\n drivers/acorn/block/mfmhd.c | 8 ++++----\n drivers/cdrom/aztcd.c | 2 +-\n drivers/cdrom/cm206.c | 2 +-\n drivers/cdrom/gscd.c | 2 +-\n drivers/cdrom/mcdx.c | 2 +-\n drivers/cdrom/optcd.c | 2 +-\n drivers/cdrom/sjcd.c | 2 +-\n\nDrivers with cosmetic fixes only:\n b/drivers/block/amiflop.c\n b/drivers/block/nbd.c\n b/drivers/ide/legacy/hd.c\n\nSigned-off-by: Boaz Harrosh \u003cbharrosh@panasas.com\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "27a278aa4309df244a2619f47031acce00ca1b7c", "tree": "8717f64c7628d1902f50fd4c061daee06f3d034f", "parents": [ "bdab00b73d2f77075a3c73556e2692bf06849c17" ], "author": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Mon Jul 09 23:17:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:59 2007 +0200" }, "message": "drivers/ide/ide-dma.c: unexport ide_set_dma\n\nide_set_dma no longer has any modular user.\n\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "bdab00b73d2f77075a3c73556e2692bf06849c17", "tree": "0ea8db6c990de201487d910bc51ca691f9e3887b", "parents": [ "f2befd9e80b39a5aa54d65cf59b6a5feb9a8117e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "message": "via82cxxx: backport short cables support from pata_via.c\n\nBackport short cables support from pata_via.c.\n\nThis patch should allow UDMA \u003e 2 modes on Acer Ferrari 3400.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\n" }, { "commit": "f2befd9e80b39a5aa54d65cf59b6a5feb9a8117e", "tree": "66eca0f1bd8ea98b7a4724824db432ddda965fcc", "parents": [ "95ba8c17bc57bf4666e9de2be715b69d9a1ba211" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "message": "sis5513: backport short cables support from pata_sis.c\n\nBackport short cables support from pata_sis.c.\n\nThis patch allows UDMA \u003e 2 modes on ASUS A6K.\n\nThanks to testing this patch goes out to Jiri Stavinoha.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\n" }, { "commit": "95ba8c17bc57bf4666e9de2be715b69d9a1ba211", "tree": "69a55e2ea0453369f5c743d59408513cfd627aa3", "parents": [ "7207626f47a3d66ce361bad197eefca4b8a6fa17" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "message": "alim15x3: backport short cables support from pata_ali.c\n\nBackport short cables support from pata_ali.c and while at it cleanup\nexisting cable detection code.\n\nThis patch should allow UDMA \u003e 2 modes on HP Pavilion N5430 and Fujitsu P2000.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\n" }, { "commit": "7207626f47a3d66ce361bad197eefca4b8a6fa17", "tree": "57f386c2e27656dcc13b6f1a4804bf79f141a9fb", "parents": [ "49521f97ccd3c2bf6e71a91cea8fe65d170fa4fb" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "message": "piix: backport short cables support from ata_piix.c\n\nBackport short cables support from ata_piix.c.\n\nThis patch should allow UDMA \u003e 2 modes on:\n- Acer 5602WLMi\n- Acer 3682WLMi\n- Asus W5F\n- Acer Aspire 2023WLMi\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\n" }, { "commit": "49521f97ccd3c2bf6e71a91cea8fe65d170fa4fb", "tree": "f61c34da6092f2f1a97a78da567afc59ad40850b", "parents": [ "75b1d97535327d0428c6bffd9d5407e65546fd5d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "message": "ide: add short cables support\n\nThis patch allows users to override both host and device side cable detection\nwith \"ideX\u003data66\" kernel parameter. Thanks to this it should be now possible\nto use UDMA \u003e 2 modes on systems (laptops mainly) which use short 40-pin cable\ninstead of 80-pin one.\n\nNext patches add automatic detection of some systems using short cables.\n\nChanges:\n\n* Rename hwif-\u003eudma_four to hwif-\u003ecbl and make it u8.\n\n* Convert all existing users accordingly (use ATA_CBL_* defines while at it). \n\n* Add ATA_CBL_PATA40_SHORT support to ide-iops.c:eighty_ninty_three().\n\n* Use ATA_CBL_PATA40_SHORT for \"ideX\u003data66\" kernel parameter.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nReviewed-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\n" }, { "commit": "75b1d97535327d0428c6bffd9d5407e65546fd5d", "tree": "3271a13a27ed2a7896b7018bc2fceac62eba1b2e", "parents": [ "15a4f943e729d8ba215ee551df6d7988ba14ac00" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:57 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:57 2007 +0200" }, "message": "ide: convert ide_find_best_mode() users to use ide_max_dma_mode()\n\nide-timing.h:\n\n* remove handling of DMA modes from ide_find_best_mode() and rename it to\n ide_find_best_pio_mode()\n\n* drop no longer needed \"map\" argument from ide_find_best_pio_mode()\n and delete needless -\u003eid check\n\n* remove no longer needed XFER_SWDMA and XFER_UDMA* defines\n\nau1xxx-ide.c:\n\n* use ide_max_dma_mode() instead of ide_find_best_mode()\n\n* remove needless CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA #ifdef\n\namd74xx.c:\n\n* store UDMA masks in amd_ide_chip[] and while at it make \"base\" field\n to be u8 instead of unsigned long\n\n* convert the driver to use UDMA masks from amd_ide_chip[]\n\n* use ide_max_dma_mode() and ide_find_best_pio_mode() instead\n of ide_find_best_mode()\n\n* delete stale comment from amd74xx_ide_dma_check()\n\n* remove no longer needed AMD_UDMA* defines\n\nvia82cxxx.c:\n\n* remove unused DISPLAY_VIA_TIMINGS define\n\n* store UDMA masks in via_isa_bridges[] and while at it make \"flags\" field\n to be u8 instead of u16\n\n* convert the driver to use UDMA masks from via_isa_bridges[]\n\n* use ide_max_dma_mode() and ide_find_best_pio_mode() instead\n of ide_find_best_mode()\n\n* remove no longer needed VIA_UDMA* defines\n\npmac.c:\n\n* use ide_max_dma_mode() instead of ide_find_best_mode()\n\nThere should be no functionality changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nReviewed-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\n" }, { "commit": "15a4f943e729d8ba215ee551df6d7988ba14ac00", "tree": "16c115fc64919b905f928066d354a4008b231356", "parents": [ "ecea57309e826c8aed020e4dae92b368f2eda2a5" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:57 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:57 2007 +0200" }, "message": "ide: fix pre-EIDE SWDMA support\n\nIf the word 62 is not defined use the word 52 to get SWDMA mask\nin ide_get_mode_mask().\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ecea57309e826c8aed020e4dae92b368f2eda2a5", "tree": "36b9bcaad34e0865aedbc4f44ae3536891b91a26", "parents": [ "f50f9d8867b95925078ba0fa450e3a5736629d28" ], "author": { "name": "Andi Drebes", "email": "lists-receive@programmierforen.de", "time": "Mon Jul 09 23:17:57 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:57 2007 +0200" }, "message": "drivers/ide/legacy/hd.c: Array size calculation using sizeof replaced with ARRAY_SIZE\n\nThis patch replaces an array size calculation in drivers/ide/legacy/hd.c\nthat was done using sizeof with the ARRAY_SIZE macro.\n\nTested by compilation on an i386 box using \"allyesconfig\".\nDiffed against Linus\u0027 git-tree.\n\nSigned-off-by: Andi Drebes \u003clists-receive@programmierforen.de\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f50f9d8867b95925078ba0fa450e3a5736629d28", "tree": "0315c4febd8874fa887bdc5b95b255dac65f6ed1", "parents": [ "e71bc140c013dfaff0369ebcc9802a798e358473" ], "author": { "name": "Robert P. J. Day", "email": "rpjday@mindspring.com", "time": "Mon Jul 09 23:17:57 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:57 2007 +0200" }, "message": "ide: remove content related to dead CONFIG_BLK_DEV_MAC_MEDIABAY config variable\n\nSigned-off-by: Robert P. J. Day \u003crpjday@mindspring.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "e71bc140c013dfaff0369ebcc9802a798e358473", "tree": "fe83a1704c6950f599c36ccb0798be88c6fb45df", "parents": [ "74c8f97a6c2d12fb144ad34076e969e8a01dc4b3" ], "author": { "name": "Robert P. J. Day", "email": "rpjday@mindspring.com", "time": "Mon Jul 09 23:17:57 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:57 2007 +0200" }, "message": "ide: remove references to the non-existent CONFIG_SCSI_EATA_DMA\n\nSigned-off-by: Robert P. J. Day \u003crpjday@mindspring.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "74c8f97a6c2d12fb144ad34076e969e8a01dc4b3", "tree": "fcdb19a6ce5fc5a8bd229c85a83fc41f96e86637", "parents": [ "f3577db0c294ab4ce8460a8003312474b509e95f" ], "author": { "name": "Robert P. J. Day", "email": "rpjday@mindspring.com", "time": "Mon Jul 09 23:17:57 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:57 2007 +0200" }, "message": "ide-cd: replace C code with call to ARRAY_SIZE() macro\n\nDelete the unnecessary macro ARY_LEN and use ARRAY_SIZE directly.\n\nSigned-off-by: Robert P. J. Day \u003crpjday@mindspring.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f3577db0c294ab4ce8460a8003312474b509e95f", "tree": "bcebdc1236375767ef5f514e5727771a224f413c", "parents": [ "bb53cfe9fa21c4f875d5c9470865fbbd0657804e" ], "author": { "name": "Junio C Hamano", "email": "junkio@cox.net", "time": "Mon Jul 09 23:17:57 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:57 2007 +0200" }, "message": "ide_in_drive_list(): \"ALL\" is not a wildcard anymore\n\nThis removes the support to treat \"ALL\" as a wildcard for\nfirmware revision. This is made a separate patch, as it will\nbreak out-of-tree ide drivers that feed its own table that uses\n\"ALL\" as the wildcard to ide_in_drive_list().\n\nSigned-off-by: Junio C Hamano \u003cjunkio@cox.net\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: Dave Jones \u003cdavej@redhat.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c2d3ce8c39cb17dfc8d0426a98bd79f5d7b21e36", "tree": "c1dd749c39abfb70a81a5a5f34b6275021c5aeaf", "parents": [ "6d78013bfc20b8579827fc8f214c6f85d469c051" ], "author": { "name": "Junio C Hamano", "email": "junkio@cox.net", "time": "Mon Jul 09 23:17:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:56 2007 +0200" }, "message": "ide_in_drive_list(): accept NULL as the wildcard for firmware revision\n\nEarlier, the matching of (model,rev) in ide-dma black/white list\nhandling was to consider \"ALL\" in the table to match any\nrevision. This makes NULL to be also an accepted wildcard, and\nchanges the entries of tables in ide-dma.c to use NULL.\n\nThe code still accepts \"ALL\" as the wildcard, in order to keep\nany out-of-tree ide driver that feeds its own table that uses\n\"ALL\" as the wildcard to ide_in_drive_list() function from\nbreaking.\n\nSigned-off-by: Junio C Hamano \u003cjunkio@cox.net\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: Dave Jones \u003cdavej@redhat.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6d78013bfc20b8579827fc8f214c6f85d469c051", "tree": "581644ea90ec539d5c0ea511d72a934efc7cd4ca", "parents": [ "f9383c4269d264c3cf563bd2de365891f6592ebd" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Mon Jul 09 23:17:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:56 2007 +0200" }, "message": "aec62xx: kill speedproc() method wrapper (take 2)\n\nThere\u0027s no reason to have the speedproc() method wrapper for the two quite\ndifferent chip families, so just get rid of it.\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "f9383c4269d264c3cf563bd2de365891f6592ebd", "tree": "7f1f3525c51237dc5806d17dd2c68c19d47a493b", "parents": [ "1b9da32a2855afa3c5f27690e03a33dc97410c42" ], "author": { "name": "Matthias Kaehlcke", "email": "matthias.kaehlcke@gmail.com", "time": "Mon Jul 09 23:17:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:56 2007 +0200" }, "message": "ide: use mutex instead of ide_setting_sem semaphore in IDE driver\n\nThe IDE driver uses a semaphore as mutex.\nUse the mutex API instead of the (binary) semaphore.\n\nSigned-off-by: Matthias Kaehlcke \u003cmatthias.kaehlcke@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n--\n\n" }, { "commit": "1b9da32a2855afa3c5f27690e03a33dc97410c42", "tree": "d09e32add5b9f5159ce62a4ceef6b9c47fd085bf", "parents": [ "b1d19db4e770a752ec032971388fa69a73c84919" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Mon Jul 09 23:17:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:56 2007 +0200" }, "message": "aec62xx: remove init_dma() method (take 2)\n\nGet rid of the init_dma() method (which had no particular reason to exist) by\nfolding it into the init_hwif() method. While at it, also perform some cleanup\nin the latter method:\n\n- get rid of the useless clearing of hwif-\u003eautodma;\n\n- fold the serialization code into one \u0027if\u0027 statement;\n\n- fold setting the drives\u0027 \u0027autotune\u0027 and \u0027autodma\u0027 fields into the single\n statements...\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b1d19db4e770a752ec032971388fa69a73c84919", "tree": "5e4f9bf005b2ede5dbf658b10d42c835511c0ada", "parents": [ "83a6d4ab3b09c0c1921b657bbaac5ada3c9c3623" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Mon Jul 09 23:17:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:56 2007 +0200" }, "message": "aec62xx: rework init_setup_aec6x80()\n\nRework init_setup_aec6x80() so that it won\u0027t rewrite the constant name strings\nanymore -- in order to do this:\n\n- in aec62xx_init_one(), pass a local copy of \u0027struct pci_device_id\u0027 down the\n call chain;\n\n- change the names for in aec62xx_chipsets[] to default to AEC-6280[R];\n\n- override the \u0027name\u0027 field in init_setup_aec6x80() only if bit 4 of the DMA\n status register is set.\n\nWhile at it, also change the \u0027udma_mask\u0027 field for AEC-6x80R chips in this\nfunction and remove the code doing the same from the init_hwif() method...\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "83a6d4ab3b09c0c1921b657bbaac5ada3c9c3623", "tree": "21f86005466a0c9f87f60e13ffc3e7135e24818e", "parents": [ "2648e5d9a80d8a020feb343c52a8704e978e60c6" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Mon Jul 09 23:17:55 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:55 2007 +0200" }, "message": "cmd64x: init. code cleanup\n\nFix two minor issues with PCI0646 chip reporting in the init_chipset() method:\n\"IRQ workaround enabled\" message printed out not only for revision 0x01 and\n\"CMD646: chipset revision\" printed twice (by IDE core and the driver itself).\nAlso, remove empty/pointless switch cases for the chips other than PCI0646,\nduplicate write to the MRDMODE register when enabling interrupts and MEMORY\nREAD LINE cycles, and needless/misplaced initialization of the timing registers\nin this method.\nSwitch to reading only the PCI revision ID register itself, not the whole 32\nbits at its address in init_chipset() and init_hwif() methods; in addition,\nget rid of the useless clearing of hwif-\u003eautodma and perform some cosmetic\nstyle changes in the latter method.\nRefactor ata66_cmd64x() by moving all the code into the \u0027switch\u0027 statement,\nrenaming/adding variables, and fixing the coding style.\nWhile at it, finally get rid of the meaningless aliasing register #define\u0027s...\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "2648e5d9a80d8a020feb343c52a8704e978e60c6", "tree": "c5e2fcbe3c2a25a96250738e759c110af2d45937", "parents": [ "ef29888ea8e1fdc499e995260195b66fc91d2728" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Mon Jul 09 23:17:55 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:55 2007 +0200" }, "message": "hpt366: simplify UltraDMA filtering (take 4)\n\nSimplify UltraDMA mode filtering in the driver:\n\n- make use of the newly introduced \u0027udma_mask\u0027 field of \u0027ide_pci_device_t\u0027 to\n set the correct hwif-\u003eultra_mask, modifying init_setup_hpt366() to select\n the correct mask based on the chip revision;\n\n- replace \u0027max_mode\u0027 field of the \u0027struct hpt_info\u0027 with \u0027max_ultra\u0027 specifying\n the maximum UltraDMA mode allowed;\n\n- rewrite hpt3xx_udma_filter() to differ the filters based on the \u0027chip_type\u0027\n field, and only use it for HPT366 and HPT370[A] where it\u0027s really necessary.\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "ef29888ea8e1fdc499e995260195b66fc91d2728", "tree": "aa042c07a63de5bf4147ab819f89724ad9838877", "parents": [ "c283f5dbe31920ca70b80a594a97bfaa2a28be13" ], "author": { "name": "Matthias Kaehlcke", "email": "matthias.kaehlcke@gmail.com", "time": "Mon Jul 09 23:17:55 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:55 2007 +0200" }, "message": "ide: use mutex instead of ide_cfg_sem semaphore in IDE driver\n\nThe IDE driver uses a semaphore as mutex.\nUse the mutex API instead of the (binary) semaphore.\n\nSigned-off-by: Matthias Kaehlcke \u003cmatthias.kaehlcke@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c283f5dbe31920ca70b80a594a97bfaa2a28be13", "tree": "891268bfec27d88bb9c5773026dcf950afe063d9", "parents": [ "841d2a9bf16471716ba3a5172d24aa40a2ea9398" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Mon Jul 09 23:17:54 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:54 2007 +0200" }, "message": "ide: make void and rename ide_dma_timeout() method\n\nSince ide_dma_timeout() method\u0027s result is discarded, make it return \u0027void\u0027.\nWhile at it, drop \u0027ide_\u0027 from the method\u0027s name, drop the \u0027__\u0027 prefix from\nthe default method\u0027s name, and do some cleanups in this method driver-wise:\n\n- in ide-dma.c, au1xxx-ide.c, and pdc202xx_old.c, define/use \u0027hwif\u0027 variable;\n\n- in au1xxx-ide.c, get rid of commented out printk();\n\n- in sl82c105.c, get rid of unnecessary variables.\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" } ], "next": "841d2a9bf16471716ba3a5172d24aa40a2ea9398" }