)]}' { "log": [ { "commit": "dfe5751941ef2478c57565f8ebca09623d83a8a4", "tree": "9c26fe14e29ef5db20829069a47ef6378c400f7b", "parents": [ "3118cb077358e472adb0db8e207a63bd84fd267f" ], "author": { "name": "Carl Vanderlip", "email": "carlv@codeaurora.org", "time": "Mon Jul 23 12:34:47 2012 -0700" }, "committer": { "name": "Carl Vanderlip", "email": "carlv@codeaurora.org", "time": "Fri Jul 27 10:24:48 2012 -0700" }, "message": "video: msm: Add CSC and QSEED support to Overlay API\n\nAdd support for CSC and QSEED configuration through MSMFB_OVERLAY_SET and\nMSMFB_OVERLAY_PLAY ioctls. Provide better integration than previous attempt\nwith the existing Overlay and PostProcessing APIs.\n\nCRs-Fixed: 380750\nChange-Id: If895391074ef1e7d7a6824d289e1ed9da6a52180\nSigned-off-by: Carl Vanderlip \u003ccarlv@codeaurora.org\u003e\n" }, { "commit": "3118cb077358e472adb0db8e207a63bd84fd267f", "tree": "be2fc2f800e64c4d1432472002ab9e976eca5502", "parents": [ "382b00b9a664fa0bd9b8d8bee2dae3f4340d425d" ], "author": { "name": "Carl Vanderlip", "email": "carlv@codeaurora.org", "time": "Fri Jun 22 18:15:18 2012 -0700" }, "committer": { "name": "Carl Vanderlip", "email": "carlv@codeaurora.org", "time": "Fri Jul 27 10:24:48 2012 -0700" }, "message": "video: msm: Remove old post processing overlay integration\n\nRemove old implementation of HSIC and QSEED smoothing/sharpening overlay\nintegration. Need to replace with new implementation that better integrates\nthe existing functions of the two APIs.\n\nCRs-Fixed: 380750\nChange-Id: Id3469fad16764ed88e74a8da75bb873f726ba366\nSigned-off-by: Carl Vanderlip \u003ccarlv@codeaurora.org\u003e\nSigned-off-by: Pravin Tamkhane \u003cpravint@codeaurora.org\u003e\n" }, { "commit": "382b00b9a664fa0bd9b8d8bee2dae3f4340d425d", "tree": "b01c7ce6a6bac72c5c044afbe7590843fad7f466", "parents": [ "fbf467206a4b5d09f51268535364f0a1b462eef6" ], "author": { "name": "Carl Vanderlip", "email": "carlv@codeaurora.org", "time": "Wed May 16 16:45:07 2012 -0700" }, "committer": { "name": "Carl Vanderlip", "email": "carlv@codeaurora.org", "time": "Fri Jul 27 10:24:47 2012 -0700" }, "message": "video: msm: Add QSEED Table2 Support\n\nAdd support for QSEED Table2 reads/writes. Table 2 is a table of coeffients\nfor QSEED Table 1 to offset into. Table 2 is quite large, caution should be\ntaken when writing into it.\n\nCRs-Fixed: 380315\nChange-Id: I89be18c0047dcf1d9a3bcd538967b2bbe7b4efe1\nSigned-off-by: Carl Vanderlip \u003ccarlv@codeaurora.org\u003e\n" }, { "commit": "fbf467206a4b5d09f51268535364f0a1b462eef6", "tree": "6d70a21d53c373609c44e034a717dbd73504137f", "parents": [ "023ab95c38444d825903bd059cb15f40d25573b8" ], "author": { "name": "Carl Vanderlip", "email": "carlv@codeaurora.org", "time": "Wed May 16 16:43:39 2012 -0700" }, "committer": { "name": "Carl Vanderlip", "email": "carlv@codeaurora.org", "time": "Fri Jul 27 10:24:47 2012 -0700" }, "message": "video: msm: Add QSEED Table reading support\n\nAdd support to read the tables of QSEED values. When the values of the\nQSEED tables are able to be written to, it is beneficial to be able to read\nwhat\u0027s there as well.\n\nCRs-Fixed: 380315\nChange-Id: I3110721906424f70a12bf5736de7875dec03f4c6\nSigned-off-by: Carl Vanderlip \u003ccarlv@codeaurora.org\u003e\n" }, { "commit": "023ab95c38444d825903bd059cb15f40d25573b8", "tree": "78ee302ce8048b0dff6d03ace9b1ae0c55d81228", "parents": [ "6545c2c80bb3de4aebe7970ae5af6c9066a7296c", "7b20eabf74532736e4704fe17827a4f3a2bcad33" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jul 27 08:09:49 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jul 27 08:09:49 2012 -0700" }, "message": "Merge \"diag: Move registration cleanup function to work queue\" into msm-3.4" }, { "commit": "6545c2c80bb3de4aebe7970ae5af6c9066a7296c", "tree": "f89cffa321187adaa5b0c987d7dc94f0b5a89cc1", "parents": [ "276f01e98e3964f3484993f494f6e3842ab1963f", "bc315ea3c81c545f273492d5532d62d109a3c4c7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jul 27 08:09:41 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jul 27 08:09:41 2012 -0700" }, "message": "Merge \"msm: camera: Add support for Bayer stats\" into msm-3.4" }, { "commit": "276f01e98e3964f3484993f494f6e3842ab1963f", "tree": "6f59a4dde28a4024b6b1aa0505404d24c7ada98c", "parents": [ "03b4df6c29a72d043cbb2125ad9a9d5439bc9720", "cca30bbf8457cf4dbd2a6388ebfb436b981b4225" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jul 27 08:09:38 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jul 27 08:09:38 2012 -0700" }, "message": "Merge \"ASoC: apq8064: Add unsupported headset detection support\" into msm-3.4" }, { "commit": "03b4df6c29a72d043cbb2125ad9a9d5439bc9720", "tree": "52e1e6ff8ac99a7d4379d0a3d3144ad8054d7001", "parents": [ "65f94819cdbf9384f71c7ae32c8029aa8a84a973", "7c3c45b9a4b51f422db4434c87e7951102ec2841" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jul 27 08:09:32 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jul 27 08:09:32 2012 -0700" }, "message": "Merge \"USB: msm72k_udc: Check if the ep is not disabled before queuing it\" into msm-3.4" }, { "commit": "65f94819cdbf9384f71c7ae32c8029aa8a84a973", "tree": "dab93db0c058832d29ec0df0e36d5d0147cc560f", "parents": [ "29615018aeb38bb228f6249469054e69e63ce20b", "57808a6b8c372d86d3b31d91c8749f9f35bf6a43" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jul 27 08:09:29 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jul 27 08:09:29 2012 -0700" }, "message": "Merge \"arm: arch_timer: export function to read physical counter\" into msm-3.4" }, { "commit": "29615018aeb38bb228f6249469054e69e63ce20b", "tree": "db2df14427f75103d44b82993df1f975a791d0f2", "parents": [ "881c83defb21608b83bb1a9bdb0bb0f2ca97b3d5", "eb78cbf13d7eb21290ed1b9bb5d2a176ecd6eed1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jul 27 08:09:25 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jul 27 08:09:25 2012 -0700" }, "message": "Merge \"msm: pcie: Disable secondary bus reset functionality\" into msm-3.4" }, { "commit": "881c83defb21608b83bb1a9bdb0bb0f2ca97b3d5", "tree": "1fd6425fd60f8d74c0ecdc6c9ed570883de060eb", "parents": [ "1488690c4a0ff637b222cfce75b8bf17c5a0a4f6", "bc9f60a99f7d6130e6d8028e340a421072498d3f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jul 27 08:09:22 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jul 27 08:09:22 2012 -0700" }, "message": "Merge \"msm: vidc: Uses on-chip memory for video codecs\" into msm-3.4" }, { "commit": "1488690c4a0ff637b222cfce75b8bf17c5a0a4f6", "tree": "54a7593625ce78984d5d4c338ae4ad05b098fcb3", "parents": [ "915d39060d75b0366cfb1c09787537948f0a4452", "92b36039364eec4798c786abc8c5c1cee8c22870" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jul 27 08:09:17 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jul 27 08:09:17 2012 -0700" }, "message": "Merge \"msm: 8064: Remove cpu dcvs governor from device list\" into msm-3.4" }, { "commit": "915d39060d75b0366cfb1c09787537948f0a4452", "tree": "35e6391084d11e70ca358b66f47e7828757c2506", "parents": [ "07bbb9c6fa7a6363dd1db409ac92b84e61532777", "1e8ddb5cfe5711b9d7c53a90e122f436894e3c99" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jul 27 08:09:13 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jul 27 08:09:13 2012 -0700" }, "message": "Merge \"net: usb: Using workqueue as bottom half handler\" into msm-3.4" }, { "commit": "07bbb9c6fa7a6363dd1db409ac92b84e61532777", "tree": "bade38a361dfbfc0154cb6085c4d943e5b8c12ab", "parents": [ "3ee0d7aee3bc2a095ecd8e2bc8650a9e21a8a484", "3dff4ef26eb40494eebb17adef80e66a0a469478" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jul 27 08:09:09 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jul 27 08:09:09 2012 -0700" }, "message": "Merge \"msm: mpq8064: Enable separate ioctl call for noise reduction (nr)\" into msm-3.4" }, { "commit": "3ee0d7aee3bc2a095ecd8e2bc8650a9e21a8a484", "tree": "b1c22193125810c9b9c90699d937d18ed1bf0e4d", "parents": [ "54c62d1a55cd918cc15b7d35c6d6faa402c78430", "58243db25ebb92f6ae812886a9b5c15106bd432b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jul 27 08:09:05 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jul 27 08:09:05 2012 -0700" }, "message": "Merge \"msm: camera: Fix memory leak with stats buffers\" into msm-3.4" }, { "commit": "54c62d1a55cd918cc15b7d35c6d6faa402c78430", "tree": "0bc7719e02a0b7d6ec554532c495a618e92c2705", "parents": [ "9419b2f318f283c867d9e43b19152ba9474ee2a2", "7b116e16148391c077f018e694e791520539e0b7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jul 27 03:43:24 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jul 27 03:43:24 2012 -0700" }, "message": "Merge \"hwmon: qpnp-adc: Add PMIC QPNP VADC Driver\" into msm-3.4" }, { "commit": "9419b2f318f283c867d9e43b19152ba9474ee2a2", "tree": "ba9b44d06cc25bd68d5555d279cf17558df15dcf", "parents": [ "c87911af5e92abb64c70623f2b919f8b4ab96e9e", "8f6ca4fc022e3b30db937bfbcc5002cf06cdc245" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jul 27 03:43:23 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jul 27 03:43:23 2012 -0700" }, "message": "Merge \"USB: android: Add support for USB Target Function (UASP)\" into msm-3.4" }, { "commit": "c87911af5e92abb64c70623f2b919f8b4ab96e9e", "tree": "f4d4fd5db2e5fe9abace947c7135cfea47b23ec4", "parents": [ "45032e5d954f7f8ab39939f06ae34cba4aff1eae", "adcc6a2fb7d9464bc763ed039c88c2c2e970aa3c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jul 27 03:43:21 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jul 27 03:43:21 2012 -0700" }, "message": "Merge \"USB: gadget: Fix memory leak in UASP function\" into msm-3.4" }, { "commit": "45032e5d954f7f8ab39939f06ae34cba4aff1eae", "tree": "bdbcba2781b468198ca0b5583b041dcf023ecc87", "parents": [ "45b6d48421881eeb004b08d7ee8efb4daf2038b4", "86473f0be0cda51054abd9c4fd20bf261d412548" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jul 27 03:43:19 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jul 27 03:43:19 2012 -0700" }, "message": "Merge \"msm: acpuclock-7627: Add support of 1.4GHz for 8625\" into msm-3.4" }, { "commit": "45b6d48421881eeb004b08d7ee8efb4daf2038b4", "tree": "0254455f7b3e5f2a691f494cd694ea1fb4e1261b", "parents": [ "8ca1043ab14af2a713b942640b803a92f3e2604f", "a1424c712b118b548812b1b4f42098e14e4d3830" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jul 26 23:42:29 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jul 26 23:42:29 2012 -0700" }, "message": "Merge changes I8b0a3f1e,I7cb6128a,I8102253c into msm-3.4\n\n* changes:\n arm/dt: msm: Refactor IOMMU device tree entries\n msm: iommu: Fix MDP context bank interrupts\n iommu/msm: Add TLB sync operations\n" }, { "commit": "8ca1043ab14af2a713b942640b803a92f3e2604f", "tree": "0591695cac53e76c7ca7a95c49e5f7941a92d9f6", "parents": [ "beafd3da49d8aaed7dc701f07986657866e6d4e2", "ce78fc2fb144a869de747c44b174d4ab8ab7a72e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jul 26 23:42:26 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jul 26 23:42:26 2012 -0700" }, "message": "Merge changes I74f3b57d,Ibe2e3350 into msm-3.4\n\n* changes:\n msm: iommu: Use the generic label property\n iommu/msm: Print context name instead of device name\n" }, { "commit": "beafd3da49d8aaed7dc701f07986657866e6d4e2", "tree": "93bf4639c13a758fa693dc04adca584827c4f403", "parents": [ "44c3497688641c218b20a1463bef08c3d386da23", "372cfb477fad6a6093c725c29b1dbfaab27deee8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jul 26 23:42:19 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jul 26 23:42:19 2012 -0700" }, "message": "Merge \"msm: iommu: Add VFE IOMMU device\" into msm-3.4" }, { "commit": "44c3497688641c218b20a1463bef08c3d386da23", "tree": "010cb22a7efc68c5f6bc2f1b6dd79bfee16b586a", "parents": [ "d088152ab59046b2b99823c02f93bad17589622d", "c79a73827e2fd801c6a5e78cb00234eb9205b2c3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jul 26 23:42:17 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jul 26 23:42:17 2012 -0700" }, "message": "Merge \"arm/dt: msm8974: Add cache ERP devices\" into msm-3.4" }, { "commit": "d088152ab59046b2b99823c02f93bad17589622d", "tree": "d0ffd1e197b251911d3b50a0926058fab58fe6ba", "parents": [ "b953671bffdfba2df4e2b27c96cf81981bedc8f3", "53156f5794a1eb8625033cabe243bf35bde93d1f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jul 26 21:09:27 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jul 26 21:09:27 2012 -0700" }, "message": "Merge \"msm_fb: display: add out of range check for display sizes\" into msm-3.4" }, { "commit": "b953671bffdfba2df4e2b27c96cf81981bedc8f3", "tree": "3e73083f07495a55aa5b3eab978bf7363c79ff47", "parents": [ "cfe015fe6ff769f0fdbb9f411a026cd29c2e98ed", "d7d2b0698912348c464e126fe85fa4aca9da0bd5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jul 26 21:09:24 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jul 26 21:09:24 2012 -0700" }, "message": "Merge \"msm: bam_dmux: add missing parameter to bam_dmux_log() call\" into msm-3.4" }, { "commit": "cfe015fe6ff769f0fdbb9f411a026cd29c2e98ed", "tree": "f8c28680203454af768448a041d7e933c5d83962", "parents": [ "3ec194d64d1720c21e7adf2c38761b7ea80a0f2c", "211a7caa61b22069ba78da124f864ceb65826c9e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jul 26 21:09:22 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jul 26 21:09:22 2012 -0700" }, "message": "Merge \"proc: show present cpu instead of online cpu in /proc/stat\" into msm-3.4" }, { "commit": "3ec194d64d1720c21e7adf2c38761b7ea80a0f2c", "tree": "098139cd4382aa46634f71ff7dd345fd92742680", "parents": [ "0a012510c70144d8b78a61d6009e890c362ad6c3", "cbd522ce6cf1442bfedb1f9cbb9812671c0688ce" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jul 26 21:09:21 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jul 26 21:09:21 2012 -0700" }, "message": "Merge \"ASoC: wcd9xxx: Update platform data pointer for I2C probe.\" into msm-3.4" }, { "commit": "0a012510c70144d8b78a61d6009e890c362ad6c3", "tree": "3b1f9ee45168d8b59e070d0081faf1e9ae09be09", "parents": [ "e392f2642f292d7a8935038ec95c8f914292fb10", "e22e21d93260cee3aff0dff7247635d9624c8aa5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jul 26 21:09:20 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jul 26 21:09:20 2012 -0700" }, "message": "Merge \"msm: kgsl: Do bounds checking on user supplied GPU addresses\" into msm-3.4" }, { "commit": "e392f2642f292d7a8935038ec95c8f914292fb10", "tree": "12f6c445055d3211d6620a0432d3333b0a9df4e2", "parents": [ "fc1eebdd04a54ca32d438becb2c8a60dc9ed1a82", "39eaba3542ab177a997762e81963392260f904ca" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jul 26 21:09:18 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jul 26 21:09:18 2012 -0700" }, "message": "Merge \"Bluetooth: Avoid putting LE Conn into sniff/active\" into msm-3.4" }, { "commit": "fc1eebdd04a54ca32d438becb2c8a60dc9ed1a82", "tree": "fe3f882d7388c18949aa238de53d915a0e576ceb", "parents": [ "8f3f756697a8425d442d155b7a116864a5301e92", "b949858c2a66e841dfe07e94cf815c8d289afe17" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jul 26 21:09:09 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jul 26 21:09:09 2012 -0700" }, "message": "Merge \"msm: Bug fixes in lpm_resources and mpm\" into msm-3.4" }, { "commit": "8f3f756697a8425d442d155b7a116864a5301e92", "tree": "5c68c8cb14da55524a960bea1a2658f795a537c1", "parents": [ "046d98e99cec0984ae657e3fd698520cd4ac1faf", "834c8594c0583d779cb6a8eb3fca3ebc714d87d0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jul 26 21:09:01 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jul 26 21:09:01 2012 -0700" }, "message": "Merge \"msm: kgsl: Limit the number of indirect buffers per submission\" into msm-3.4" }, { "commit": "046d98e99cec0984ae657e3fd698520cd4ac1faf", "tree": "c024007c778f05a5229c178d198edc4f8d4194e3", "parents": [ "f8cc1a2a1a6bd4b71a890fe6b5b35730967cbc39", "a448aeb993e34007cce20b3a1cce4b6c914a53a8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jul 26 21:08:59 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jul 26 21:08:59 2012 -0700" }, "message": "Merge \"msm: kgsl: Enable GDHS of GPU power rail while the screen is on\" into msm-3.4" }, { "commit": "f8cc1a2a1a6bd4b71a890fe6b5b35730967cbc39", "tree": "6d5123e85f289b4e3191f8060244c54b79576a12", "parents": [ "391e7c71aef8cee99cabfd6659f776ab5aabe28a", "bd39669497f6791b8299d6ff60986436928f8afc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jul 26 21:08:58 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jul 26 21:08:58 2012 -0700" }, "message": "Merge \"msm: kgsl: In recovery switch IOMMU clocks on/off\" into msm-3.4" }, { "commit": "391e7c71aef8cee99cabfd6659f776ab5aabe28a", "tree": "5232562d5a8f82c7192d06efcd7b3d50e56bd303", "parents": [ "0fbb7e335fed44285fdb407cd5a66cbf95504221", "7d1716597cc9049da73ece31c67f2c1e6879ee6d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jul 26 21:08:57 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jul 26 21:08:57 2012 -0700" }, "message": "Merge \"arm: Fix compilation error with gcc 4.5.2\" into msm-3.4" }, { "commit": "0fbb7e335fed44285fdb407cd5a66cbf95504221", "tree": "4faddad313955f00d3cf4604ad52da115f1d6047", "parents": [ "f330512d2f143a667aeba4438b5a7b95cb82e470", "6ee7f09ade547d57806ffa2a2775f8b70f72191a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jul 26 21:08:55 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jul 26 21:08:55 2012 -0700" }, "message": "Merge \"msm_serial: Fix UIM driver configuration\" into msm-3.4" }, { "commit": "a1424c712b118b548812b1b4f42098e14e4d3830", "tree": "5b5f8e074c85eb807141b45c5d81c75534374527", "parents": [ "f8b32b2d15ef25ce108fe9617e335bf05bb51a44" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Mon Jul 23 17:22:51 2012 -0700" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Thu Jul 26 19:36:29 2012 -0700" }, "message": "arm/dt: msm: Refactor IOMMU device tree entries\n\nMove the IOMMU device tree entries into an SoC-independent\nfile to allow them to be reused across multiple SoCs.\n\nChange-Id: I8b0a3f1e9bd072e321d9bd8a0c4d5a53585e7842\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "ce78fc2fb144a869de747c44b174d4ab8ab7a72e", "tree": "b7a7376a726be435de3f8558ac4ba81cbe1852a9", "parents": [ "e14ca5ca54251e1087919b99dda0719cbeebac87" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Wed Jul 11 17:20:27 2012 -0700" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Thu Jul 26 19:36:29 2012 -0700" }, "message": "msm: iommu: Use the generic label property\n\nUse the label property to specify device labels instead of\na vendor-specific property.\n\nChange-Id: I74f3b57db469781f738f0d52c785d992c1e88efb\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "f8b32b2d15ef25ce108fe9617e335bf05bb51a44", "tree": "e104c6ca2840b13e94fe0d55c515fb490b9caad3", "parents": [ "22d32c602bbe3a6792372e07794eb7060c1c73bd" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Wed Jul 11 19:09:14 2012 -0700" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Thu Jul 26 19:36:29 2012 -0700" }, "message": "msm: iommu: Fix MDP context bank interrupts\n\nUpdate the DTS entries for the MDP IOMMU with the correct\ninterrupt numbers.\n\nChange-Id: I7cb6128ab5841ca157eb5af2c67b656d1a015ea3\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "22d32c602bbe3a6792372e07794eb7060c1c73bd", "tree": "c0e2562e44d784abffa4e64ebee290785319a007", "parents": [ "ce78fc2fb144a869de747c44b174d4ab8ab7a72e" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Wed Jul 11 18:00:06 2012 -0700" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Thu Jul 26 19:36:29 2012 -0700" }, "message": "iommu/msm: Add TLB sync operations\n\nThe hardware requires a TLB sync operation at the end of\neach TLB maintenance operation.\n\nChange-Id: I8102253cfc12af530216346efa5bb9760db25352\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "372cfb477fad6a6093c725c29b1dbfaab27deee8", "tree": "d153bb8f1101fb30aa58a39d3c55ab32524aa7d3", "parents": [ "f330512d2f143a667aeba4438b5a7b95cb82e470" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Tue Jul 10 20:19:11 2012 -0700" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Thu Jul 26 19:36:28 2012 -0700" }, "message": "msm: iommu: Add VFE IOMMU device\n\nAdd the DTS entry and clock table entries to support the\nVFE IOMMU on 8974.\n\nChange-Id: I6e382228a02323c3b9ef844429827ceb00570feb\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "e14ca5ca54251e1087919b99dda0719cbeebac87", "tree": "64cb78f1c9520574d14aef629636ca15f07b6b73", "parents": [ "372cfb477fad6a6093c725c29b1dbfaab27deee8" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Wed Jul 11 12:40:51 2012 -0700" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Thu Jul 26 19:36:28 2012 -0700" }, "message": "iommu/msm: Print context name instead of device name\n\nWhen probing the context devices, dev_info already prints\nthe device name, so printing it again is redundant. The\ncontext name is more useful anyway, so print this instead.\n\nChange-Id: Ibe2e33501baa1fd53f6ff45943226377eb61fd7e\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "c79a73827e2fd801c6a5e78cb00234eb9205b2c3", "tree": "4456240b825349e58fdfc3c452adb992fef7c1f6", "parents": [ "f330512d2f143a667aeba4438b5a7b95cb82e470" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Thu Jul 19 17:24:32 2012 -0700" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Thu Jul 26 19:35:26 2012 -0700" }, "message": "arm/dt: msm8974: Add cache ERP devices\n\nAdd device tree entries for the cache ERP devices on 8974\nusing the existing bindings.\n\nChange-Id: I23a254b13244b88762b93f2e728cd907d20b00df\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "86473f0be0cda51054abd9c4fd20bf261d412548", "tree": "569d87065175b87e23bda0c6b9dc5bbe42567f8a", "parents": [ "f330512d2f143a667aeba4438b5a7b95cb82e470" ], "author": { "name": "Kaushal Kumar", "email": "kaushalk@codeaurora.org", "time": "Thu Jun 28 19:35:58 2012 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jul 26 19:46:21 2012 -0600" }, "message": "msm: acpuclock-7627: Add support of 1.4GHz for 8625\n\nFor 8625 2.0 PLL4 is capable to run at 1.4GHz. Add acpuclock\ntable for the same and also add support to dynamically\nre-program the PLL4 assuming 801.6MHz jump is fine from\nH/W perspective.\n\nChange-Id: I3712907d4aa3f4c085f874652797e9e7d4203598\nSigned-off-by: Kaushal Kumar \u003ckaushalk@codeaurora.org\u003e\n" }, { "commit": "cca30bbf8457cf4dbd2a6388ebfb436b981b4225", "tree": "8dc1c0128a4a9b1cf700ad6e6e88e5d331a56f92", "parents": [ "dadf2c4ef14a0c80884e3fe9e26acc7089989b5f" ], "author": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Wed Jul 11 13:31:55 2012 -0700" }, "committer": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Thu Jul 26 18:07:55 2012 -0700" }, "message": "ASoC: apq8064: Add unsupported headset detection support\n\nThe wcd9310 codec driver already can detect and report unsupported headset\nplugging. Create headset jack with unsupported headset mask to be able to\nreport via sound core.\n\nChange-Id: I0119d01c039362cc7b185f9f3407d78c958bc49a\nSigned-off-by: Joonwoo Park \u003cjoonwoop@codeaurora.org\u003e\n" }, { "commit": "f330512d2f143a667aeba4438b5a7b95cb82e470", "tree": "d0aac1c686af89d388a73faec46bd3d4ddab0b6a", "parents": [ "3ae134c2e35ae687a574d51ced6525eb952c5369", "898c56dc844a383b42d83c6c35f5bfbbc86ea634" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jul 26 17:36:15 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jul 26 17:36:15 2012 -0700" }, "message": "Merge \"msm: Driver module to read RPM RBCPR stats\" into msm-3.4" }, { "commit": "bc9f60a99f7d6130e6d8028e340a421072498d3f", "tree": "e38c7001561bf7452039fefcb30d3c72bb3b417d", "parents": [ "3ae134c2e35ae687a574d51ced6525eb952c5369" ], "author": { "name": "Vinay Kalia", "email": "vkalia@codeaurora.org", "time": "Tue Jul 17 01:23:42 2012 -0700" }, "committer": { "name": "Vinay Kalia", "email": "vkalia@codeaurora.org", "time": "Thu Jul 26 13:32:01 2012 -0700" }, "message": "msm: vidc: Uses on-chip memory for video codecs\n\nVideo driver allocates on-chip memory (OCMEM) and\nhands it over to the video hardware for internal usage.\nVideo encode/decode performance improves with OCMEM.\n\nChange-Id: Ic6e35278db24cedc003aa33d5e3cef52172e2254\nSigned-off-by: Vinay Kalia \u003cvkalia@codeaurora.org\u003e\n" }, { "commit": "211a7caa61b22069ba78da124f864ceb65826c9e", "tree": "f7c5a43a7f912a20e4f86d5af810364d43dda076", "parents": [ "4181239136b9fb0b2c000fbff691f361dc9d48e5" ], "author": { "name": "Ajay Dudani", "email": "adudani@codeaurora.org", "time": "Tue Jul 24 20:50:09 2012 -0700" }, "committer": { "name": "Ajay Dudani", "email": "adudani@codeaurora.org", "time": "Thu Jul 26 09:23:11 2012 -0700" }, "message": "proc: show present cpu instead of online cpu in /proc/stat\n\nSome userspace applications use /proc/stat to determine how many CPUs\nthe system has. CPU hotplug can offline a CPU at runtime and causing the\noffline CPU not present in /proc/stat if we only show online cpu in\n/proc/stat.\n\nChange-Id: I4fd0cfcdb174244044634389da2fbdef77744c19\nSigned-off-by: Ajay Dudani \u003cadudani@codeaurora.org\u003e\n" }, { "commit": "3ae134c2e35ae687a574d51ced6525eb952c5369", "tree": "37f56022982fd84029b18b006fe26c38953e0667", "parents": [ "295de4cbc3a76d4108e62e1c78e6e899c7e125da", "cb722d6f8f9a27cd9d579bc8821692b6b03beefc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jul 25 21:29:02 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jul 25 21:29:02 2012 -0700" }, "message": "Merge changes I4b7123e9,I74fa8f0e into msm-3.4\n\n* changes:\n msm: vidc: Adds bus scaling for video codecs\n msm: vidc: Change configuration flag for video.\n" }, { "commit": "295de4cbc3a76d4108e62e1c78e6e899c7e125da", "tree": "e11efca349b9deb4e3a88d7ecee4131aff3c114f", "parents": [ "e1595fc933065720d04f3598827d10fd6dcdaf9f", "780f6db0c0e5a9174d2cd7d9ea203a2b49039c77" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jul 25 21:29:01 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jul 25 21:29:01 2012 -0700" }, "message": "Merge \"msm: camera: Fix flicker issue for S5K3L1 camera sensor\" into msm-3.4" }, { "commit": "e1595fc933065720d04f3598827d10fd6dcdaf9f", "tree": "2bb271f85cdae812841c7cd51431518e48d97b32", "parents": [ "2885328a72bd600c53a9f6e3471b98c71b0178d2", "cae9ee9065aab9d5f0ce240417082515587ed452" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jul 25 21:29:00 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jul 25 21:29:00 2012 -0700" }, "message": "Merge \"msm: mpq8064: Correct the PCIE interrupt mapping\" into msm-3.4" }, { "commit": "2885328a72bd600c53a9f6e3471b98c71b0178d2", "tree": "62a32b14e3ed5973211a901fee46de1dce40894b", "parents": [ "afd69cebf91dd456ded688bba1be03599d48a9c7", "40680aa34eac9f259c13eb6b24c55a69d22d1e22" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jul 25 21:28:59 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jul 25 21:28:59 2012 -0700" }, "message": "Merge changes Ie8fbb382,If8aede0e into msm-3.4\n\n* changes:\n msm: 8974: Adds load-freq table for video\n msm: vidc: Adds clock scaling\n" }, { "commit": "afd69cebf91dd456ded688bba1be03599d48a9c7", "tree": "193b747f5b1892a8dfcfcd3c526f013e82533f26", "parents": [ "bb9e9ae90e4a299ebcb4360d78fa32b9a6ad4b20", "ecfe4c0ee6192c870ac01783e65d00ce41b4caeb" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jul 25 21:28:58 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jul 25 21:28:58 2012 -0700" }, "message": "Merge \"defconfig: automatic update\" into msm-3.4" }, { "commit": "bb9e9ae90e4a299ebcb4360d78fa32b9a6ad4b20", "tree": "a1eaa8fd6b037867d5e3af898ee17f9100f2d5a2", "parents": [ "dadf2c4ef14a0c80884e3fe9e26acc7089989b5f", "76db1411035906e1c0abfffad981218b023053e3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jul 25 21:28:57 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jul 25 21:28:57 2012 -0700" }, "message": "Merge \"tty: smux_ctl: add device attribute for open timeout\" into msm-3.4" }, { "commit": "cbd522ce6cf1442bfedb1f9cbb9812671c0688ce", "tree": "7f506369091e1003c07b30dd33fd184a61118ecd", "parents": [ "dadf2c4ef14a0c80884e3fe9e26acc7089989b5f" ], "author": { "name": "Venkat Sudhir", "email": "vsudhir@codeaurora.org", "time": "Fri Jul 13 09:46:29 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jul 25 19:37:59 2012 -0600" }, "message": "ASoC: wcd9xxx: Update platform data pointer for I2C probe.\n\nInitialize platform data pointer for I2S probe if the interface\nis not slimbus. Slimbus probe is called first and if interface\nis determined to be slimbus then I2C probe for codec will simply\nreturn. This is necessary to avoid wrong update of platform data\npointer.\n\nChange-Id: I40fb66eca4af15aa0ef534e8021285f46f155a42\nSigned-off-by: Venkat Sudhir \u003cvsudhir@codeaurora.org\u003e\n" }, { "commit": "7b20eabf74532736e4704fe17827a4f3a2bcad33", "tree": "c5c0d8669a4cb9737aa1efa5ff084aa8f49d8f1e", "parents": [ "dadf2c4ef14a0c80884e3fe9e26acc7089989b5f" ], "author": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Tue Jun 19 17:50:58 2012 -0700" }, "committer": { "name": "Dixon Peterson", "email": "dixonp@codeaurora.org", "time": "Wed Jul 25 16:10:49 2012 -0700" }, "message": "diag: Move registration cleanup function to work queue\n\nThe peripheral registrations are stored in a table\non apps processor. During SSR, these need to be deleted\nand fresh ones are recorded after SSR completes. Currently\nthis clean up function is called from interrupt context.\n\nThis cleanup function works on a shared table, which is\nprotected by mutexes. Using this mutex in interrupt function\ncauses bug with spinlocks and generates warnings. Moving this\ncleanup to work queue resolves the issue.\n\nHowever, there might be race condition with this move. A new\nregistration might come in, while the clean up is still going on\nOR yet to begin. Adding a bit mask which tracks the peripheral\nundergoing SSR. if new registration is received from this processor\nbefore clean up is completed, the registration packet is dropped.\nAlso, an error message is printed in kernel to notify of the drop.\n\nChange-Id: I95e143220a3960d4e9459bb9874bab2911be0937\nCRs-Fixed: 371866\nSigned-off-by: Shalabh Jain \u003cshalabhj@codeaurora.org\u003e\n" }, { "commit": "ecfe4c0ee6192c870ac01783e65d00ce41b4caeb", "tree": "b937e29d2df3a7e3be664b7ceb38d5dcab8df817", "parents": [ "dadf2c4ef14a0c80884e3fe9e26acc7089989b5f" ], "author": { "name": "Steve Muckle", "email": "smuckle@codeaurora.org", "time": "Wed Jul 25 13:17:39 2012 -0700" }, "committer": { "name": "Steve Muckle", "email": "smuckle@codeaurora.org", "time": "Wed Jul 25 13:17:39 2012 -0700" }, "message": "defconfig: automatic update\n\nUpdating the defconfig files to match the Kconfigs is necessary\nto prevent unrelated changes showing up in future defconfig\npatches.\n\nChange-Id: I75faf31f3160e5ae2a40df02b2c00c43f99ebff6\nSigned-off-by: Steve Muckle \u003csmuckle@codeaurora.org\u003e\n" }, { "commit": "cb722d6f8f9a27cd9d579bc8821692b6b03beefc", "tree": "44ed23c82725264781c7384f76aa788185978505", "parents": [ "6a8d04ce4f9fa9b7ea96a7009120c9bcee295627" ], "author": { "name": "Vinay Kalia", "email": "vkalia@codeaurora.org", "time": "Thu Jun 28 19:35:22 2012 -0700" }, "committer": { "name": "Praneeth Paladugu", "email": "ppaladug@codeaurora.org", "time": "Wed Jul 25 13:01:10 2012 -0700" }, "message": "msm: vidc: Adds bus scaling for video codecs\n\nAdds bus scaling so that the bus bandwidth\ncan be voted for according to load. This\noptimizes power consumption during video\nencode and decode operation.\n\nChange-Id: I4b7123e9ae2e429ffe9bf4636d633284768e1b33\nSigned-off-by: Vinay Kalia \u003cvkalia@codeaurora.org\u003e\n" }, { "commit": "6a8d04ce4f9fa9b7ea96a7009120c9bcee295627", "tree": "6dec126c0e58ffc3eb3fb42ec00d44883736e5a7", "parents": [ "40680aa34eac9f259c13eb6b24c55a69d22d1e22" ], "author": { "name": "Vinay Kalia", "email": "vkalia@codeaurora.org", "time": "Tue Jul 17 19:23:05 2012 -0700" }, "committer": { "name": "Praneeth Paladugu", "email": "ppaladug@codeaurora.org", "time": "Wed Jul 25 13:00:54 2012 -0700" }, "message": "msm: vidc: Change configuration flag for video.\n\nChange kernel configuration flag for video\non 8974 so that it does not interfere with\nvideo drivers on other chipsets.\n\nChange-Id: I74fa8f0ed7be713893b9e280bb9b77606bc5c786\nSigned-off-by: Vinay Kalia \u003cvkalia@codeaurora.org\u003e\n" }, { "commit": "40680aa34eac9f259c13eb6b24c55a69d22d1e22", "tree": "10009a626921ca7afa2ac1224827168f280b8d4b", "parents": [ "94b221b88d8274f1d04839e52ad3b09fc5aa5fe1" ], "author": { "name": "Vinay Kalia", "email": "vkalia@codeaurora.org", "time": "Mon Jul 23 12:45:39 2012 -0700" }, "committer": { "name": "Praneeth Paladugu", "email": "ppaladug@codeaurora.org", "time": "Wed Jul 25 13:00:38 2012 -0700" }, "message": "msm: 8974: Adds load-freq table for video\n\nAdds required clocks and load-frequency table\nfor vcodec clock. Load-frequency table is used\nto scale clocks according to the load during\nvideo encode/decode operation.\n\nChange-Id: Ie8fbb382b0c8d0e9ce982149f47eea3cd990869c\nSigned-off-by: Vinay Kalia \u003cvkalia@codeaurora.org\u003e\n" }, { "commit": "94b221b88d8274f1d04839e52ad3b09fc5aa5fe1", "tree": "3ecf6b97da181351da391132754dcbe098ccf695", "parents": [ "dadf2c4ef14a0c80884e3fe9e26acc7089989b5f" ], "author": { "name": "Vinay Kalia", "email": "vkalia@codeaurora.org", "time": "Mon Jun 25 18:50:13 2012 -0700" }, "committer": { "name": "Praneeth Paladugu", "email": "ppaladug@codeaurora.org", "time": "Wed Jul 25 13:00:21 2012 -0700" }, "message": "msm: vidc: Adds clock scaling\n\nVideo driver manages clock rate according\nto the increase in load on video core. Clock\nis scaled as per number of macroblocks\ndecoded/encoded per second. This makes sure\nthat the power consumption and performance is\noptimal.\n\nChange-Id: If8aede0e3048cdc9bcdf14ce0c239a58bdd5d263\nSigned-off-by: Vinay Kalia \u003cvkalia@codeaurora.org\u003e\n" }, { "commit": "bd39669497f6791b8299d6ff60986436928f8afc", "tree": "4b3f09fce81af741391cd019f50f5f19a5ada7bc", "parents": [ "dadf2c4ef14a0c80884e3fe9e26acc7089989b5f" ], "author": { "name": "Shubhraprakash Das", "email": "sadas@codeaurora.org", "time": "Fri Jun 15 14:19:34 2012 -0600" }, "committer": { "name": "Shubhraprakash", "email": "sadas@codeaurora.org", "time": "Wed Jul 25 13:23:38 2012 -0600" }, "message": "msm: kgsl: In recovery switch IOMMU clocks on/off\n\nTurn on the IOMMU clocks in recovery as the recovered command\nstream may have commands that read and write to IOMMU registers.\n\nChange-Id: I6a8d9fa17a57b0c4f8564fc62d019b2e150b8399\nSigned-off-by: Shubhraprakash Das \u003csadas@codeaurora.org\u003e\n" }, { "commit": "7d1716597cc9049da73ece31c67f2c1e6879ee6d", "tree": "b0241373ab3244fc3830e08a4efb57998f8194be", "parents": [ "dadf2c4ef14a0c80884e3fe9e26acc7089989b5f" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Wed Jul 25 11:32:37 2012 -0700" }, "committer": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Wed Jul 25 11:32:37 2012 -0700" }, "message": "arm: Fix compilation error with gcc 4.5.2\n\nFix warning with the LDM/STM instructions. The instructions dont\nhave a register offset so set the offset to 0.\n\nChange-Id: I2c988373c88e280015faa43076139650747d7ff3\nAcked-by: Kaushik Sikdar \u003cksikdar@qualcomm.com\u003e\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "6ee7f09ade547d57806ffa2a2775f8b70f72191a", "tree": "98573c03cb1dfebb88d255a8d5c596e057b8a5ab", "parents": [ "dadf2c4ef14a0c80884e3fe9e26acc7089989b5f" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Wed Jul 25 11:29:52 2012 -0700" }, "committer": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Wed Jul 25 11:29:52 2012 -0700" }, "message": "msm_serial: Fix UIM driver configuration\n\nMASK_RX bit is set to prevent transmitted data from looped back.\nSet the TX and RX mode to T\u003d0 mode; not T\u003d1 mode.\n\nChange-Id: Ida78fb56cf4b51c0fa88cb57da58c0dcc5db51c9\nAcked-by: Ho Lee \u003cholee@qualcomm.com\u003e\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "3dff4ef26eb40494eebb17adef80e66a0a469478", "tree": "337a4e2e6d4e557e12ba0ced1da4336a69beff40", "parents": [ "2913b3bd0ccb2fc4c237b99ac7613d9a1b025f7e" ], "author": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Wed Jun 13 15:20:59 2012 -0400" }, "committer": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Wed Jul 25 13:34:27 2012 -0400" }, "message": "msm: mpq8064: Enable separate ioctl call for noise reduction (nr)\n\nNR for VCAP is capable of receiving manual tuning parameters. In\norder for the client to pass in these parameters a separate ioctl\nwas developed.\n\nChange-Id: Ia8d7e8de80ee4fd7ccd2019d30b4457f1000e106\nSigned-off-by: Terence Hampson \u003cthampson@codeaurora.org\u003e\n" }, { "commit": "b949858c2a66e841dfe07e94cf815c8d289afe17", "tree": "b98f9db60b3452b63ca80efa1273702ddc872e57", "parents": [ "dadf2c4ef14a0c80884e3fe9e26acc7089989b5f" ], "author": { "name": "Mahesh Sivasubramanian", "email": "msivasub@codeaurora.org", "time": "Wed Jul 25 11:22:56 2012 -0600" }, "committer": { "name": "Mahesh Sivasubramanian", "email": "msivasub@codeaurora.org", "time": "Wed Jul 25 11:30:15 2012 -0600" }, "message": "msm: Bug fixes in lpm_resources and mpm\n\nFixed incorrect setting of the internal state of the MPM driver. In\nlpm_resources, since Vdd_dig is represented via corner voltage, update\nthe default value to represent the same. Also, modify lpm_resources to\nuse the noirq RPM API during exit sleep.\n\nChange-Id: I58365702d1eb490504e62a6f45b93fd37f474e9f\nSigned-off-by: Mahesh Sivasubramanian \u003cmsivasub@codeaurora.org\u003e\n" }, { "commit": "898c56dc844a383b42d83c6c35f5bfbbc86ea634", "tree": "d460685ef7a2149dd162b5118366d6a4e8536507", "parents": [ "dadf2c4ef14a0c80884e3fe9e26acc7089989b5f" ], "author": { "name": "Girish Mahadevan", "email": "girishm@codeaurora.org", "time": "Tue Jun 05 16:09:19 2012 -0600" }, "committer": { "name": "Girish Mahadevan", "email": "girishm@codeaurora.org", "time": "Wed Jul 25 09:45:07 2012 -0600" }, "message": "msm: Driver module to read RPM RBCPR stats\n\nNew driver module to read RPM RBCPR stats. RPM processor\nmaintains the RBCPR stats in MSG RAM. This driver\nmodule will read the stats from the MSG RAM and display the stats.\nUsers can acess the RPM RBCPR stats through debugfs. Currently\nthese stats are only maintained for MSM8930.\n\nCRs-Fixed: 364785\nChange-Id: I306409609e9aeb103a88207be7fc3a7ab2638d36\nSigned-off-by: Girish Mahadevan \u003cgirishm@codeaurora.org\u003e\n" }, { "commit": "76db1411035906e1c0abfffad981218b023053e3", "tree": "f3037e187a14d096071265348cf73e033f4b4154", "parents": [ "4181239136b9fb0b2c000fbff691f361dc9d48e5" ], "author": { "name": "Angshuman Sarkar", "email": "angshuman@codeaurora.org", "time": "Wed Jul 25 15:17:19 2012 +0530" }, "committer": { "name": "Angshuman Sarkar", "email": "angshuman@codeaurora.org", "time": "Wed Jul 25 15:22:56 2012 +0530" }, "message": "tty: smux_ctl: add device attribute for open timeout\n\nPort open call for smux is blocking. There is a 5 seconds default\ntimeout for the open call. The total number of retries for opening\nthe port makes the total wait time to be 11 minutes. This timeout\nbecomes an issue if QSC does not come up in time. Adding a device\nattribute lets the user space control/reduce the timeout value.\n\nCRs-Fixed: 372629\nChange-Id: Ib20bf05da740c99dbb7e94b4df96d256ecadad34\nSigned-off-by: Angshuman Sarkar \u003cangshuman@codeaurora.org\u003e\n" }, { "commit": "a448aeb993e34007cce20b3a1cce4b6c914a53a8", "tree": "24208a87c92d26dbf5cdb9ccb9b1d6a9e14abc19", "parents": [ "4181239136b9fb0b2c000fbff691f361dc9d48e5" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Tue Jun 12 16:30:29 2012 -0600" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jul 25 03:16:34 2012 -0600" }, "message": "msm: kgsl: Enable GDHS of GPU power rail while the screen is on\n\nTurn on the feature which allows SLUMBER in place of SLEEP for targets\nwith low latency GPU power rail bring-up.\n\nCRs-Fixed: 369927\nChange-Id: I3c2bf2049a6b7670da7c2e5ec4cde3cf66642c9b\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "dadf2c4ef14a0c80884e3fe9e26acc7089989b5f", "tree": "bd4c18bd365b2593d58832c8a7c847e234834b08", "parents": [ "cdb2318700090c864e0bfc5e6b71866b8c8a620a", "1a995323aea5a1e8ff8032276b28fbf49fbd1165" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jul 25 02:09:25 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jul 25 02:09:25 2012 -0700" }, "message": "Merge changes I61f01fc9,I711f7135 into msm-3.4\n\n* changes:\n msm: board-8974: Call of_mpm_init function\n arm/dt: 8974: Add MPM device into the device tree.\n" }, { "commit": "cdb2318700090c864e0bfc5e6b71866b8c8a620a", "tree": "b8516979d12ac2c78b641c38872c1c021c1eca54", "parents": [ "4181239136b9fb0b2c000fbff691f361dc9d48e5", "102e596d9b5fefc6bebd0fee8970a7730414f01b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jul 25 02:09:21 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jul 25 02:09:21 2012 -0700" }, "message": "Merge \"msm: mpm: MPM driver support for devicetree/irqdomain\" into msm-3.4" }, { "commit": "7c3c45b9a4b51f422db4434c87e7951102ec2841", "tree": "2fec12a6d4126de971da979146e7af99b3d900f2", "parents": [ "79c65b5b5af46a8e0d728807bddb7eec4e5aef47" ], "author": { "name": "Rajkumar Raghupathy", "email": "raghup@codeaurora.org", "time": "Tue Jul 24 16:13:36 2012 +0530" }, "committer": { "name": "Rajkumar Raghupathy", "email": "raghup@codeaurora.org", "time": "Wed Jul 25 12:22:27 2012 +0530" }, "message": "USB: msm72k_udc: Check if the ep is not disabled before queuing it\n\nQueuing a request on a disabled endpoint during composition switch leads\nto prime failure. Hence return -EINVAL if a request is queued on a disabled\nendpoint.\n\nAlso, in f_mtp, block queuing a request in OUT ep in receive_file_work, if\nthe device state is STATE_OFFLINE.\n\nChange-Id: I0e706d5280a2460baf6ab05dbf97a09c59b642fb\nCRs-Fixed: 378207\nSigned-off-by: Rajkumar Raghupathy \u003craghup@codeaurora.org\u003e\n" }, { "commit": "7b116e16148391c077f018e694e791520539e0b7", "tree": "b2add29adab9f7d0cfd6a70b4db6a127b4976910", "parents": [ "a0e51df06ec6d5462ac04b043442e28cef7c56f4" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Tue Jun 05 23:27:46 2012 -0700" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Tue Jul 24 16:40:11 2012 -0700" }, "message": "hwmon: qpnp-adc: Add PMIC QPNP VADC Driver\n\nThe QPNP VADC driver supports the User Bank Peripheral of\nthe voltage ADC(VADC).\n\nVADC is a 15 bit ADC that measures signals through the\nMain analog multiplexer (AMUX) and PREMUX. The driver\narbitrates the request to issue ADC read requests.\n\nVADC driver includes support for the conversion sequencer.\nThe conversion sequencer is a HW triggered signal to start\nADC measurement on trigger events for PA ON,\ncamera flash and TX threshold.\n\nThe AMUX supports external pull-ups simultaneously. Clients\ncan select the appropriate AMUX input channel to measure the\nADC for the intended pull up configuration.\n\nChange-Id: I8886968ccec54ad03334b113b4516d4d200e0da8\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "4181239136b9fb0b2c000fbff691f361dc9d48e5", "tree": "48249f5a8a917c7028b4fc7e8347429354f73366", "parents": [ "a0e51df06ec6d5462ac04b043442e28cef7c56f4" ], "author": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Fri Jul 13 15:26:20 2012 -0700" }, "committer": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Tue Jul 24 16:13:21 2012 -0700" }, "message": "usb: msm_otg: Fix error handling bug in driver probe\n\nDriver probe is returning 0(success) in case of error\nreturned by APIs called in msm_otg_probe(). This is causing\nNULL pointer exceptions during system wide suspend as\ndriver data for platform device is not set.\n\nCRs-Fixed: 379532\nChange-Id: I194e9386ba8de6d88ab102a467793f8b2f03083a\nSigned-off-by: Hemant Kumar \u003chemantk@codeaurora.org\u003e\n" }, { "commit": "1a995323aea5a1e8ff8032276b28fbf49fbd1165", "tree": "ba2fbd47db90edcc3ffa1b87aa09c92e94a09032", "parents": [ "01df14d8a6c311f65d193841bf00183371d0c8d5" ], "author": { "name": "Mahesh Sivasubramanian", "email": "msivasub@codeaurora.org", "time": "Thu Jul 12 15:26:46 2012 -0600" }, "committer": { "name": "Mahesh Sivasubramanian", "email": "msivasub@codeaurora.org", "time": "Tue Jul 24 16:24:17 2012 -0600" }, "message": "msm: board-8974: Call of_mpm_init function\n\nAdd a call to of_mpm_init function from within the msm_8974_init_irq().\nThe MPM drivers keeps account of all enabled interrupts in the system to\nbe able to configure the MPM hardware during low power sleep modes. To\nensure that MPM receives notification for all interrupts, it needs to be\ninitialized as soon as the system interrupt controllers are initliazed.\n\nChange-Id: I61f01fc9a7a6caf5b950f24cf7474f86c97745ca\nSigned-off-by: Mahesh Sivasubramanian \u003cmsivasub@codeaurora.org\u003e\n" }, { "commit": "01df14d8a6c311f65d193841bf00183371d0c8d5", "tree": "f2f1c919f9951ebf3729f7201855272034536083", "parents": [ "102e596d9b5fefc6bebd0fee8970a7730414f01b" ], "author": { "name": "Mahesh Sivasubramanian", "email": "msivasub@codeaurora.org", "time": "Fri May 04 17:35:55 2012 -0600" }, "committer": { "name": "Mahesh Sivasubramanian", "email": "msivasub@codeaurora.org", "time": "Tue Jul 24 16:24:17 2012 -0600" }, "message": "arm/dt: 8974: Add MPM device into the device tree.\n\nMPM driver is used to configure the MPM driver for monitoring wakeup\ninterrupts when the system is low power mode.\n\nChange-Id: I711f71359b751c5be08aaaccff7ee3548e3243d9\nSigned-off-by: Mahesh Sivasubramanian \u003cmsivasub@codeaurora.org\u003e\n" }, { "commit": "102e596d9b5fefc6bebd0fee8970a7730414f01b", "tree": "9a522cfdaf1de101f9f87a3409e3ad603bf2e30b", "parents": [ "86a9cf113310fff2f5e8b854329f0047b51b7d48" ], "author": { "name": "Mahesh Sivasubramanian", "email": "msivasub@codeaurora.org", "time": "Wed Jun 20 13:12:11 2012 -0600" }, "committer": { "name": "Mahesh Sivasubramanian", "email": "msivasub@codeaurora.org", "time": "Tue Jul 24 16:24:06 2012 -0600" }, "message": "msm: mpm: MPM driver support for devicetree/irqdomain\n\nThe current MPM driver works for targets where the interrupt controllers\noperate in a legacy mode, where the linux irqs are at a constant offset\nfrom the hardware irqs. On newer targets, the mapping within the\ninterrupt controllers are no longer restricted to legacy mode.\n\nThe change also address the interface changes in the MPM hardware\nstarting with 8974 chipsets.\n\nChange-Id: Ide9b5bf7e29c94a85e37d04cd0064864b89f7c5c\nSigned-off-by: Mahesh Sivasubramanian \u003cmsivasub@codeaurora.org\u003e\n" }, { "commit": "39eaba3542ab177a997762e81963392260f904ca", "tree": "d78d39879b2828b200265b99d1b13702f5c5ad5c", "parents": [ "0aa979798d897bd71d03a07f8c97daafa2937ae9" ], "author": { "name": "Sunny Kapdi", "email": "sunnyk@codeaurora.org", "time": "Sun Jul 22 21:29:38 2012 -0700" }, "committer": { "name": "Sunny Kapdi", "email": "sunnyk@codeaurora.org", "time": "Tue Jul 24 15:03:10 2012 -0700" }, "message": "Bluetooth: Avoid putting LE Conn into sniff/active\n\nLE connections don\u0027t have sniff/active connection\nmode, unlike BR/EDR. Make sure that the link which\nhas been requested to enter sniff/active mode is not\nan LE connection.\n\nCRs-fixed: 376972\nChange-Id: Iec4714d1c2ea7621267f9064b7046eb9d5ff9462\nSigned-off-by: Sunny Kapdi \u003csunnyk@codeaurora.org\u003e\n" }, { "commit": "a0e51df06ec6d5462ac04b043442e28cef7c56f4", "tree": "ebb7a7319ba6016bad2fb7946caa124f4953ccc0", "parents": [ "5efcaffa375661405956be27dfd13551fa555530", "d526d1ee365797c226d1a0d72769b09425a1fd0d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 14:54:18 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 14:54:18 2012 -0700" }, "message": "Merge \"msm: kgsl: Allow non-default timeout values in adreno_idle\" into msm-3.4" }, { "commit": "5efcaffa375661405956be27dfd13551fa555530", "tree": "7e0b1d598769b67f4c4e825e45c7c8499c7b92ce", "parents": [ "724a2c18ca85f5b97b5ea67945d4721e6bbd496a", "3a46ff33c8cb4c83d2e13ff21fb7aa5b10d09b81" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 14:54:16 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 14:54:16 2012 -0700" }, "message": "Merge \"ASoC: msm: Fix crash during FM recording.\" into msm-3.4" }, { "commit": "724a2c18ca85f5b97b5ea67945d4721e6bbd496a", "tree": "d6c1b41620bf3e323b3c744661569afa79a657a2", "parents": [ "86a9cf113310fff2f5e8b854329f0047b51b7d48", "f5a8e3880c0b00696914067f9edb69fd31496940" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 14:54:14 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 14:54:14 2012 -0700" }, "message": "Merge \"msm_fb: display: Brightness change observed when switching HDMI on\" into msm-3.4" }, { "commit": "d7d2b0698912348c464e126fe85fa4aca9da0bd5", "tree": "2bfa655a0b4ccf9903fa9b205ea41a35ff450f61", "parents": [ "86a9cf113310fff2f5e8b854329f0047b51b7d48" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Tue Jul 24 14:29:56 2012 -0600" }, "committer": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Tue Jul 24 15:32:32 2012 -0600" }, "message": "msm: bam_dmux: add missing parameter to bam_dmux_log() call\n\nbam_dmux_log() takes a formatted string and a variable argument list\nsimilar to printf() and creates printf() style output to a private kfifo\nlog. This change fixes a particular invocation of bam_dmux_log() which has\nan invalid variable argument list for the formatted string used. Depending\non system timing, this invocation could succeed as expected, or it could\ncause a null pointer exception.\n\nTo prevent further issues, add the __printf() function attribute so that\nthe gcc compiler will check at compile time the arguments to bam_dmux_log()\nfor proper number and types according to printf() usage.\n\nCRs-Fixed: 382037\nChange-Id: I247ac3e83664385b9dc61a434049ca5c8bb60cd2\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n" }, { "commit": "e22e21d93260cee3aff0dff7247635d9624c8aa5", "tree": "0dffbdb38c05ee43ebec005654242aaa075bfe96", "parents": [ "834c8594c0583d779cb6a8eb3fca3ebc714d87d0" ], "author": { "name": "Jordan Crouse", "email": "jcrouse@codeaurora.org", "time": "Mon Jul 23 14:34:06 2012 -0600" }, "committer": { "name": "Jordan Crouse", "email": "jcrouse@codeaurora.org", "time": "Tue Jul 24 15:06:50 2012 -0600" }, "message": "msm: kgsl: Do bounds checking on user supplied GPU addresses\n\nAdd bounds checking to kgsl_sharedmem_find_region to ensure that GPU\naddresses supplied by the user via KGSL_IOCTL_SHAREMEM_FREE and\nKGSL_IOCTL_CFF_SYNCMEM are within a valid range for the MMU scheme of\nchoice.\n\nCRs-Fixed: 380296\nChange-Id: Ic0dedbadf40fca4a9e04ba075e67e08e617806b5\nSigned-off-by: Jordan Crouse \u003cjcrouse@codeaurora.org\u003e\n" }, { "commit": "834c8594c0583d779cb6a8eb3fca3ebc714d87d0", "tree": "b744e3d3d0d68fb58679789b6e34c089f7a45697", "parents": [ "86a9cf113310fff2f5e8b854329f0047b51b7d48" ], "author": { "name": "Jordan Crouse", "email": "jcrouse@codeaurora.org", "time": "Tue Jul 24 10:06:35 2012 -0600" }, "committer": { "name": "Jordan Crouse", "email": "jcrouse@codeaurora.org", "time": "Tue Jul 24 14:15:25 2012 -0600" }, "message": "msm: kgsl: Limit the number of indirect buffers per submission\n\nPut a reasonable upper limit on the number of indirect buffers allowed\nper submission via IOCTL_KGSL_RINGBUFFER_ISSUEIBCMDS.\n\nCRs-Fixed: 380267\nChange-Id: Ic0dedbadd78a0ad3f09f67660f34b2fba421007f\nSigned-off-by: Jordan Crouse \u003cjcrouse@codeaurora.org\u003e\n" }, { "commit": "86a9cf113310fff2f5e8b854329f0047b51b7d48", "tree": "f63573025cce38bb15dea8fa898de1c684fdfcb9", "parents": [ "0542bc06450951a41bd279ad66eea9c5575eadea", "84e7b7b2939eae73ca76e89734c89ef161df9ac0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 12:12:32 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 12:12:32 2012 -0700" }, "message": "Merge \"STMicroelectronics LIS3DH device driver version 1.1.0\" into msm-3.4" }, { "commit": "0542bc06450951a41bd279ad66eea9c5575eadea", "tree": "adff31dc5e02fec374f74d41539f6d4b13a1df80", "parents": [ "778854f9b2defa56aa1d1992c818a40243803c33", "a42b50244cdb71f93bf842a28b0fc1cecc622c55" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 12:12:28 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 12:12:28 2012 -0700" }, "message": "Merge \"bluetooth: Add support for LE conn param\" into msm-3.4" }, { "commit": "778854f9b2defa56aa1d1992c818a40243803c33", "tree": "07d54c47ce609ed125bffa67cb90d6b65d3d3856", "parents": [ "3bdb8b1190eea87286172f59a9108f2150732ceb", "1ebbfadacd91fcbdb827d6797d4650e0a5cb2cd7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 12:12:28 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 12:12:28 2012 -0700" }, "message": "Merge \"msm: ocmem: Initialize the ocmem graphics mPU\" into msm-3.4" }, { "commit": "3bdb8b1190eea87286172f59a9108f2150732ceb", "tree": "781419446ba2a506c1f0f594d502b5da602085fb", "parents": [ "eec28e96a42079c6802a1cfdb2b41f27a85317e4", "e2601aeae313ed7c34026bfaf3eb2b5ec7822d5d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 12:12:27 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 12:12:27 2012 -0700" }, "message": "Merge \"ASoC: 8930: add multi channel support for hdmi\" into msm-3.4" }, { "commit": "bc315ea3c81c545f273492d5532d62d109a3c4c7", "tree": "0c6531e16fd642faef7a0c7f6180380d5550e9ce", "parents": [ "58243db25ebb92f6ae812886a9b5c15106bd432b" ], "author": { "name": "Lakshmi Narayana Kalavala", "email": "lkalaval@codeaurora.org", "time": "Tue Jul 24 09:55:48 2012 -0700" }, "committer": { "name": "Lakshmi Narayana Kalavala", "email": "lkalaval@codeaurora.org", "time": "Tue Jul 24 11:23:04 2012 -0700" }, "message": "msm: camera: Add support for Bayer stats\n\nAdd support for Bayer stats\n\nChange-Id: I69b408af91565581c925540bccb04708278bda05\nSigned-off-by: Lakshmi Narayana Kalavala \u003clkalaval@codeaurora.org\u003e\n" }, { "commit": "53156f5794a1eb8625033cabe243bf35bde93d1f", "tree": "8974183a8b2ee943fdea5e05722ca776b88583a0", "parents": [ "eec28e96a42079c6802a1cfdb2b41f27a85317e4" ], "author": { "name": "Huaibin Yang", "email": "huaibiny@codeaurora.org", "time": "Tue Jul 24 10:13:05 2012 -0700" }, "committer": { "name": "Huaibin Yang", "email": "huaibiny@codeaurora.org", "time": "Tue Jul 24 10:26:47 2012 -0700" }, "message": "msm_fb: display: add out of range check for display sizes\n\nMDP pipe or mixer size registers have 12-bit number, so boundary\nchecks are needed for those parameters. If not, input req sizes could\nbe very large 32 bit unsigned numbers, e.g. 0xffffffff, unsigned\noperations may have overflow to pass all later checks, causing MDP\nunderruns or hang issues.\n\nCRs-fixed: 380469\nChange-Id: I096d7022ede21d54266b46a140782ab0348dd54b\nSigned-off-by: Huaibin Yang \u003chuaibiny@codeaurora.org\u003e\n" }, { "commit": "92b36039364eec4798c786abc8c5c1cee8c22870", "tree": "b4df37647be70a52f88603a63b03aaf6e40dfa4a", "parents": [ "eec28e96a42079c6802a1cfdb2b41f27a85317e4" ], "author": { "name": "Syed Rameez Mustafa", "email": "rameezmustafa@codeaurora.org", "time": "Thu Jul 19 14:31:34 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 11:23:31 2012 -0600" }, "message": "msm: 8064: Remove cpu dcvs governor from device list\n\n8064 does not support the msm dcvs governor\n\nChange-Id: I51d44cf7d3339127f86b736e0c9b7c18122830f2\nCRs-Fixed: 363761\nSigned-off-by: Syed Rameez Mustafa \u003crameezmustafa@codeaurora.org\u003e\n" }, { "commit": "58243db25ebb92f6ae812886a9b5c15106bd432b", "tree": "c198408c17bc315b19bda81ee8b3a2b0e4731e48", "parents": [ "eec28e96a42079c6802a1cfdb2b41f27a85317e4" ], "author": { "name": "Lakshmi Narayana Kalavala", "email": "lkalaval@codeaurora.org", "time": "Tue Jul 24 00:06:27 2012 -0700" }, "committer": { "name": "Lakshmi Narayana Kalavala", "email": "lkalaval@codeaurora.org", "time": "Tue Jul 24 09:50:47 2012 -0700" }, "message": "msm: camera: Fix memory leak with stats buffers\n\nBuffer unprepare is not done while releasing stats buffers,\nhence add support for buf unprepare ioctl\n\nChange-Id: If4fa95c270363d1948b5924c2365785d1427e2f4\nSigned-off-by: Lakshmi Narayana Kalavala \u003clkalaval@codeaurora.org\u003e\n" }, { "commit": "eec28e96a42079c6802a1cfdb2b41f27a85317e4", "tree": "cb4e192e8d6012685bd736cbbca42c82b5476ad9", "parents": [ "f3887ef1d2a2edd9fb605cd2c7326ce39e59e429", "f3b1a19dd9c006e88a2a2dcf63e86cdf4ac3fc6d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 08:32:12 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 08:32:12 2012 -0700" }, "message": "Merge \"msm: smem: Add support to read app data from SMEM.\" into msm-3.4" }, { "commit": "f3887ef1d2a2edd9fb605cd2c7326ce39e59e429", "tree": "7c17ceeed087b14152598ce267623a22152a61f5", "parents": [ "7e2e3bee90836224ec61311364351303f2b0e8ff", "56e7f9e2d88a447b10badb0775aca35b7bebc2e4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 08:32:00 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 08:32:00 2012 -0700" }, "message": "Merge \"ARM: gic: Remove parameters from msm_gic_save\" into msm-3.4" }, { "commit": "7e2e3bee90836224ec61311364351303f2b0e8ff", "tree": "37446cc04908382560c847a91aeb86365c44b66b", "parents": [ "2913b3bd0ccb2fc4c237b99ac7613d9a1b025f7e", "af1709aa11cc2a7ffb113e27991032bdeb2257bf" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 08:31:56 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 08:31:56 2012 -0700" }, "message": "Merge \"ARM: gic: Add flag to select 8625 QGIC2 back to back read/write workaround\" into msm-3.4" }, { "commit": "2913b3bd0ccb2fc4c237b99ac7613d9a1b025f7e", "tree": "8702750537ce365cb36aa71b4594a29c285eb706", "parents": [ "ab7319ac2ef49d6a3cddb9488e10d755661e94d3", "cc4ec158cad51839206825777975f021f33344fc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 04:08:07 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 04:08:07 2012 -0700" }, "message": "Merge \"msm: ocmem: Add support for low power clients\" into msm-3.4" }, { "commit": "ab7319ac2ef49d6a3cddb9488e10d755661e94d3", "tree": "a9ec2b554a783fdfead6cd66aa71ac0cc7b9d60b", "parents": [ "6d97f2a9b5950a22be14b453f0229ba1aa90bb15", "6957fa026060675c197e2aad0762065a6aba7e31" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 04:08:03 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 04:08:03 2012 -0700" }, "message": "Merge \"msm-fb: display: Tearing issue during video playback\" into msm-3.4" }, { "commit": "6d97f2a9b5950a22be14b453f0229ba1aa90bb15", "tree": "22fb186c56d21e0c0811eaea37b3d928899205ff", "parents": [ "c2a030a8c9f5f188efca5f351351e4231fe34eb8", "4bcc4e52d617a8f89390bb632865bb08e8b1f4b0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 04:08:01 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 04:08:01 2012 -0700" }, "message": "Merge \"msm: Add support for memory dump table\" into msm-3.4" }, { "commit": "c2a030a8c9f5f188efca5f351351e4231fe34eb8", "tree": "737afbd2e1c57f3511dbea28c0e87db2c6535fc0", "parents": [ "092e50b39aa62d3763beb8ae3771cc1918fd28f2", "c8530106f295fef602928df4af13b7ab11ddd51a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 04:07:58 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 04:07:58 2012 -0700" }, "message": "Merge \"media: dvb: dvb-core: Pass ring-buffers info to kernel-demux\" into msm-3.4" }, { "commit": "092e50b39aa62d3763beb8ae3771cc1918fd28f2", "tree": "5342417a4ba2954bf7854a915a3dd4a133609492", "parents": [ "e2e178fa0c3429b305820932493e365d65342b31", "72977ed7fbf2bfe3ef877f164d7fd306ddfa270a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 02:29:47 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jul 24 02:29:47 2012 -0700" }, "message": "Merge \"msm: cache_erp: Add device tree support\" into msm-3.4" }, { "commit": "a42b50244cdb71f93bf842a28b0fc1cecc622c55", "tree": "eccf8e699b563aab729f89a0deecb0a0d444a5c1", "parents": [ "e2e178fa0c3429b305820932493e365d65342b31" ], "author": { "name": "Sunny Kapdi", "email": "sunnyk@codeaurora.org", "time": "Thu Jul 05 22:48:31 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jul 24 02:05:06 2012 -0600" }, "message": "bluetooth: Add support for LE conn param\n\nAdded support to let the userspace know about the updated\nLE connection parameters. On receiving successful connection\ncomplete and connection parameters update event from the BT\nController, send a mgmt event to the userspace bluetoothd.\n\nCRs-fixed: 380271\nChange-Id: If8c3d785188e0d4f38c7431d01c016f399137408\nSigned-off-by: Sunny Kapdi \u003csunnyk@codeaurora.org\u003e\n" } ], "next": "e2e178fa0c3429b305820932493e365d65342b31" }