)]}' { "log": [ { "commit": "395db38b308d0cfc4dc277182c3afa57a4516467", "tree": "17e2af949565568c6458572194d41787a9f80567", "parents": [ "89a47142469ee6c78696799881d6476541ef3fdf", "32a43980d5fd934c1786e82b420550b67b62f6b1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 24 11:57:06 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jan 24 11:57:06 2012 -0800" }, "message": "Merge \"msm: 8960: set SDC1 CMD and DATA line to pull up state during LPM\" into msm-3.0" }, { "commit": "e4c6afde9bf5de3bb685690e120335547c6b3d8e", "tree": "7f4bb253385202210c762895105da72da0c17cb5", "parents": [ "a62bd47e556f3cc5cc14238640c64d35c25275bf", "bb2b1faf7d0fd51457e6fc452eef6c52f2023c64" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 24 11:57:05 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jan 24 11:57:06 2012 -0800" }, "message": "Merge \"msm: smd: add separate return code if SMD port is closing\" into msm-3.0" }, { "commit": "8af872e1a7bf6ee973624d5804203837ed95229a", "tree": "4537adb7a711a045253e3c66b84fed2fb491446a", "parents": [ "5779cea2d1b31255a50eafad6b89f44824558c35" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Fri Jan 06 11:31:56 2012 -0800" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Jan 24 08:18:25 2012 -0800" }, "message": "msm: board-8930: switch to RPM control for most regulators\n\nSwitch control of most regulators from the pm8xxx-regulator\ndriver to the rpm-regulator driver. pm8xxx-regulator will still\nbe used for LDOs 16, 19, and 27 because these are not handled by\nthe RPM.\n\nChange-Id: Ibd95efc6280a62fefb704e98360eb56aba8aa116\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "5779cea2d1b31255a50eafad6b89f44824558c35", "tree": "d010f9a5eb8db453ca6f65293d8f067c56f41329", "parents": [ "8934f0f13962c9e7b50c456958041286b40249a8" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Jan 05 15:09:21 2012 -0800" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Jan 24 08:18:12 2012 -0800" }, "message": "msm: rpm-regulator: add RPM regulator support for MSM8930\n\nMSM8930 boards utilize the new PMIC PM8038. Add a new\nrpm-regulator data file which defines all of the regulators\navailable via the RPM for MSM8930 boards.\n\nThe regulator definitions describe both the physical properties of\nthe regulators and the RPM interface format used for each type of\nregulator.\n\nChange-Id: If4bdbaf3f6d22b905bf7334d681410fcddff9b7b\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "87d50ca743a93d580adedb689a41f2aefa61ea29", "tree": "e62446531d90891332d0abdbba486db0daf1c1ab", "parents": [ "971acf81f59a90bd0de03114f6ae2631bfd5d8fd", "ae93ec01d9b33862ee47b42a5985304982267450" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 24 04:45:34 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jan 24 04:45:34 2012 -0800" }, "message": "Merge \"msm: defconfig: Set initial number of KGSL pagetables to 24\" into msm-3.0" }, { "commit": "b46aff9f4a67cd2b0eb61b60e5ccdd6dc51a5e5f", "tree": "b0bcf04fb24d45181b3f005b9ac1ad7226ffff2e", "parents": [ "4d4d5c59e7eb8a1fa8c92604180508ce1619f90f", "784990121c47631cc7380a054f3223a674e3d6b4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Jan 24 04:45:34 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Jan 24 04:45:34 2012 -0800" }, "message": "Merge \"msm: rpm: Refactor Low Power Mgmt drivers to support single binary\" into msm-3.0" }, { "commit": "4d4d5c59e7eb8a1fa8c92604180508ce1619f90f", "tree": "b5c29580bf4055595a3a186607deeb37e9d4efb9", "parents": [ "87e195b46e8215d98a50b7cfe28a417d9f55f15f" ], "author": { "name": "Suresh Vankadara", "email": "svankada@codeaurora.org", "time": "Wed Jan 18 00:45:49 2012 +0530" }, "committer": { "name": "Suresh Vankadara", "email": "svankada@codeaurora.org", "time": "Tue Jan 24 05:49:57 2012 +0530" }, "message": "msm: camera: update camera clocks\n\nUpdate camera clocks csi_pclk, csi_vfe_clk,\ncsi_clk, vfe_clk to support V4L2 architecture for\ncamera.\n\nChange-Id: I7bc58202f4b2709224897c345aedb5736426ea8a\nSigned-off-by: Suresh Vankadara \u003csvankada@codeaurora.org\u003e\n" }, { "commit": "87e195b46e8215d98a50b7cfe28a417d9f55f15f", "tree": "ce3e9458d3ed3f8cbeb9deb9399072415ba7e3fd", "parents": [ "20cd3be7fb800feea670e6619fa5c446f26f7743" ], "author": { "name": "Suresh Vankadara", "email": "svankada@codeaurora.org", "time": "Wed Jan 18 00:42:58 2012 +0530" }, "committer": { "name": "Suresh Vankadara", "email": "svankada@codeaurora.org", "time": "Tue Jan 24 05:43:28 2012 +0530" }, "message": "msm: board-msm7627a-camera: Add support to V4L2\n\nUpdate camera board file to support V4L2 architecture\nfor camera.\n\nSigned-off-by: Suresh Vankadara \u003csvankada@codeaurora.org\u003e\nChange-Id: I7b8c112969fc4b629556e8ed80fdb31d182d4530\n" }, { "commit": "20cd3be7fb800feea670e6619fa5c446f26f7743", "tree": "b1a600815e40b712ea0a5ffbc153f05db6570439", "parents": [ "8df2c7555829d53b02122360e6958c15a6753179" ], "author": { "name": "Suresh Vankadara", "email": "svankada@codeaurora.org", "time": "Wed Jan 18 00:34:06 2012 +0530" }, "committer": { "name": "Suresh Vankadara", "email": "svankada@codeaurora.org", "time": "Tue Jan 24 05:42:32 2012 +0530" }, "message": "msm: devices-msm7x27a: Add support for platform devices\n\nIn V4L2 camera architecture all camera supported blocks\nare added as platform devices. To support V4L2 camera\narchitecture, convert CSIC, VFE as platform devices\n\nSigned-off-by: Suresh Vankadara \u003csvankada@codeaurora.org\u003e\nChange-Id: I95fbb273f1af31a2597e444be21bd69ac9a64034\n" }, { "commit": "8df2c7555829d53b02122360e6958c15a6753179", "tree": "7da05fcb02333290490aba70d60e0bb76d1f1095", "parents": [ "848bbb91be354d9bde3bacaadcc3dde9342cd236" ], "author": { "name": "Suresh Vankadara", "email": "svankada@codeaurora.org", "time": "Wed Jan 18 00:18:03 2012 +0530" }, "committer": { "name": "Suresh Vankadara", "email": "svankada@codeaurora.org", "time": "Tue Jan 24 05:39:29 2012 +0530" }, "message": "msm: camera: Add flags to camera supported blocks\n\nAdd is_vpe, is_csiphy, is_csid and is_ispif flags for\n8960 and 8930 camera. These flags are used to execute\nthe code based on the subsystems supported by camera\nfor a particular target.\n\nChange-Id: I3ca0e51aac7d8b221e6784290149c19767c64673\nSigned-off-by: Suresh Vankadara \u003csvankada@codeaurora.org\u003e\n" }, { "commit": "bb2b1faf7d0fd51457e6fc452eef6c52f2023c64", "tree": "1b67e10c9d0995eb997e817d0ac6f6ba9ccd0488", "parents": [ "848bbb91be354d9bde3bacaadcc3dde9342cd236" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Wed Oct 12 16:41:37 2011 -0600" }, "committer": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Mon Jan 23 15:31:27 2012 -0700" }, "message": "msm: smd: add separate return code if SMD port is closing\n\nAdd EAGAIN return code if SMD port has been allocated, but\nis currently pending a remote close. This allows the client\nto differentiate between ENODEV (port doesn\u0027t exist)\nand EAGAIN (port not ready to be opened).\n\nChange-Id: I798f29d2d9793b361965c135c4b41c3b7ff945e0\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "ae93ec01d9b33862ee47b42a5985304982267450", "tree": "f2ebe38a6adb98aa8e92a57cd3c3513d1ae5f75b", "parents": [ "350b31124c9b1088e7ca3345e42dcf0ac0166248" ], "author": { "name": "Jeremy Gebben", "email": "jgebben@codeaurora.org", "time": "Wed Jan 18 14:23:32 2012 -0700" }, "committer": { "name": "Jeremy Gebben", "email": "jgebben@codeaurora.org", "time": "Mon Jan 23 09:21:04 2012 -0700" }, "message": "msm: defconfig: Set initial number of KGSL pagetables to 24\n\nIncrease the initial pagetables created to 24 for 8660\nand 8960. Testing shows that there can be about 20\nprocesses using graphics at a time. When this happens\nmemory utilization will be great enough that an\nattempt to allocate more coherent memory will fail.\n\nThis will cost an additional 2MB of coherent memory,\nbringing the total usage for KGSL to 6MB.\n\nCRs-Fixed: 331629\nChange-Id: Ib9f7fe9c0cc0194ebbf5dfc69196e7cad7a44b11\nSigned-off-by: Jeremy Gebben \u003cjgebben@codeaurora.org\u003e\n" }, { "commit": "784990121c47631cc7380a054f3223a674e3d6b4", "tree": "d1fb5a273e61651c8bfff7d631e0553110ae39d6", "parents": [ "350b31124c9b1088e7ca3345e42dcf0ac0166248" ], "author": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Tue Nov 01 17:15:17 2011 -0600" }, "committer": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Mon Jan 23 08:36:33 2012 -0700" }, "message": "msm: rpm: Refactor Low Power Mgmt drivers to support single binary\n\nMove enumeration into uint arrays that can be chosen based on\nthe device file configuration.\n\nrpm.h will have a superset of all enumeration for all targets.\nThe device file configuration will map the enumeration defined\nin rpm.h to the target specific enumeration defined in rpm-XXXX.h.\n\nDevice drivers that need to communicate with RPM will continue to\nuse the enumeration defined in rpm.h and the RPM driver will translate\nthe generic enumeration to a device specific enumeration before sending\nthe RPM message to the RPM processor.\n\nAlso refactor SPM and MPM data for the supported targets.\n\nAdd RPM, SPM, LPM and MPM driver support for APQ8064 and MSM8930 targets.\n\nSupported targets: 8660, 8960, 9615, 8930, 8064\n\nChange-Id: I0d4ed7634cb221c124bc59a946932f7ac557ef58\nSigned-off-by: Praveen Chidambaram \u003cpchidamb@codeaurora.org\u003e\n" }, { "commit": "350b31124c9b1088e7ca3345e42dcf0ac0166248", "tree": "8a50fb1c7de708d6236b03c87ced6e3c705a0590", "parents": [ "215561d045fd6a9538fb1d09da7d8a08c4e1268c", "c868a2e9fc7d1ea255a985cd5fe7b398010d7ccc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jan 23 06:56:08 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jan 23 06:56:08 2012 -0800" }, "message": "Merge \"msm: board-qrd7627a: Add support for EVB\" into msm-3.0" }, { "commit": "32a43980d5fd934c1786e82b420550b67b62f6b1", "tree": "41650a144a4dc5379980a3756700ea3eebab8968", "parents": [ "5fd77778263af935a67e495dbabb8c270f726c7d" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Fri Jan 20 16:51:06 2012 +0530" }, "committer": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Mon Jan 23 17:20:35 2012 +0530" }, "message": "msm: 8960: set SDC1 CMD and DATA line to pull up state during LPM\n\nKeeping CMD and DATA lines pull configuration to PULL UP will\nmake sure that there is no leakage current during sleep if\nexternal pull up is connected to any of these lines.\n\nCRs-fixed: 332254\nChange-Id: I99571f5cac10ead6e5744a8d5deb7bad4f7a8a3b\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "c868a2e9fc7d1ea255a985cd5fe7b398010d7ccc", "tree": "0bea9003cbd7bc2c6550c6fe15ae842639ef995c", "parents": [ "5fd77778263af935a67e495dbabb8c270f726c7d" ], "author": { "name": "Taniya Das", "email": "tdas@codeaurora.org", "time": "Tue Jan 03 10:18:47 2012 +0530" }, "committer": { "name": "Chintan Pandya", "email": "cpandya@codeaurora.org", "time": "Mon Jan 23 14:33:32 2012 +0530" }, "message": "msm: board-qrd7627a: Add support for EVB\n\nChange-Id: I3a131af3c21d0fd0c9d3c9543c07b45ec052953d\nSigned-off-by: Taniya Das \u003ctdas@codeaurora.org\u003e\nSigned-off-by: Chintan Pandya \u003ccpandya@codeaurora.org\u003e\n" }, { "commit": "275e7d896e738552cc7d97f2e28559bcc2d013ef", "tree": "58eca76968198a5c392683465ce4a42480ea2e09", "parents": [ "5fd77778263af935a67e495dbabb8c270f726c7d" ], "author": { "name": "Jin Hong", "email": "jinh@codeaurora.org", "time": "Thu Jan 19 17:30:28 2012 -0800" }, "committer": { "name": "Jin Hong", "email": "jinh@codeaurora.org", "time": "Sun Jan 22 19:53:18 2012 -0800" }, "message": "msm8960: defconfig: enable slub_debug by default\n\nThis reverts commit 3aa5d76f820129f5bf2e9972b7e4a22ad9da5b6f, which\nremoved overhead of page poisoning as performance and power measurement\nbegan to gain importance. Now that msm8960-perf_defconfig is in place\nand is in fact the default boot img for msm8960 Android kernel it is\nsafe to again enable the useful memory corruption detection features\nof SLUB debug. Several developers mentioned how helpful the detection\nwas for them.\n\nChange-Id: I9f962a7062b9b5d190cfa9aae616202979e0215d\nSigned-off-by: Jin Hong \u003cjinh@codeaurora.org\u003e\n" }, { "commit": "70f779c6d358cd5dbcada69f5cc2e45522a07420", "tree": "44a9181c2e5850057fd319a383c68e1f0f043b60", "parents": [ "767b30c135b002c745b789b45ad8d9f7376ea663", "5f968cf3da0f447e30284fbb1dfb1d82f1becee2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 14:45:41 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 14:45:41 2012 -0800" }, "message": "Merge \"msm: board-9615: Update PID \u0026 serial number for DIAG\" into msm-3.0" }, { "commit": "f103185955934a140d32da10bf6cff188480d954", "tree": "31c024f6f78ef80d682e3f598ed84fd67531016a", "parents": [ "8080c446106b73700217888ce3060338a28e746c", "bc2e95782c7e60aca0f4486b563223ab9bfc751d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 13:09:04 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 13:09:04 2012 -0800" }, "message": "Merge \"msm: acpuclock-8960: Activate 8064 acpu frequency scaling\" into msm-3.0" }, { "commit": "bc2e95782c7e60aca0f4486b563223ab9bfc751d", "tree": "588ecb410aacff6c27960d9713dff6792c25e7eb", "parents": [ "5fb3ca81578c709bc872163d88e9461fdb7ec33e" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Fri Nov 04 03:41:38 2011 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 11:29:12 2012 -0700" }, "message": "msm: acpuclock-8960: Activate 8064 acpu frequency scaling\n\nDo the following to enable the acpuclock driver\non the 8064:\n\n1. Add new regulator consumer entries for krait2\n and krait3.\n2. Remove cpu_is_* calls thus enabling bus and\n voltage scaling calls on the 8064.\n3. Remove the stub in the cpufreq driver that\n prevents it from initializing on the 8064.\n4. Add a call to the acpuclock init function in\n the 8064 board file, after the bus driver\u0027s\n init call.\n\nChange-Id: I4f47f51241826b4056b40b012e964a9527db58f5\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "8080c446106b73700217888ce3060338a28e746c", "tree": "8306d8e31be14ba8d5f0c14c3206e46be3c5dccf", "parents": [ "897ab0804b9dfd234703ed96a589bebd1d09faa8", "b5b08e5e0eb873b1e0bc2556e0ca34dcca55ee18" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 10:26:32 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 10:26:32 2012 -0800" }, "message": "Merge \"msm: bam_dmux: Handle DMA Mapping Failure\" into msm-3.0" }, { "commit": "5fb3ca81578c709bc872163d88e9461fdb7ec33e", "tree": "18726f778b28e95df67cc54d4370455466885e87", "parents": [ "fdcc966999e263f2999c197652811d7be303ba6a", "2c43fac27a9198da023822ddc8eba0f938e953e0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 08:53:56 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 08:53:56 2012 -0800" }, "message": "Merge changes Ib9845227,I1071f656,I714aaf89,Ided0557e,I11cb890c into msm-3.0\n\n* changes:\n msm: board-8064: Add ION heap for Audio\n msm: board-8064: Add new heap for qse comm\n msm: board-8064: Add support for adjacent heaps\n msm: board-8064: Handle unstable section overflow\n msm: board-8064: Fix overflow in memory calc.\n" }, { "commit": "fdcc966999e263f2999c197652811d7be303ba6a", "tree": "efb77e12c603be5706342e7f84589ec5037be6b4", "parents": [ "10d889e246f4ef876c2ca26b51e19125dbbe8c56", "ed61ae65262a2327ad0287793ed2be801c019570" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "message": "Merge \"msm: 8660: audio: Fix tones issue on headset in FTM.\" into msm-3.0" }, { "commit": "10ab4b430ac7466ad0e942d9944f79eda3baef2a", "tree": "907f64719e724f74d3b8a96399950b328bb79ac7", "parents": [ "256d4d42fc402651a43d48a9c02f4685a1742825", "1a7ee899043514496a5a385fe43bc51ab9facbc8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "message": "Merge \"msm: footswitch: Move to new clock APIs\" into msm-3.0" }, { "commit": "256d4d42fc402651a43d48a9c02f4685a1742825", "tree": "6b9a4f287f8651d811ed4a681c6c933948ac8f8c", "parents": [ "0dd370bcd2d966a9f5aeb7c7fdab343e0b1f97c8", "0505835884aa3be65089b809b6c06780d40c373c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "message": "Merge \"defconfig: msm8960: enable S5K3L1YX config\" into msm-3.0" }, { "commit": "dd4caf45c7e01210265acf56bb077e3f5297c2dc", "tree": "c976a9faf363d8b37f54476ba6f86231f626dd5e", "parents": [ "fa664da4c0ebc2f05f75cd0da0d20d9c927eae54", "6a392d3a0730367efb4f65679995c2af50cbef2f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "message": "Merge \"msm: 8930: Add ADC client\" into msm-3.0" }, { "commit": "fa664da4c0ebc2f05f75cd0da0d20d9c927eae54", "tree": "3262d73e2d873fadb6ccb487da6613753fc55a50", "parents": [ "c407d05b677726cba22b4a9c1dfbfa82113724a0", "59c90ec4a8d5a2fbbba469fc80d7a167db639073" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 07:34:00 2012 -0800" }, "message": "Merge \"msm: arch-msm: msm8x60: Fix FTM devices issue.\" into msm-3.0" }, { "commit": "c407d05b677726cba22b4a9c1dfbfa82113724a0", "tree": "bf7ff62404c3211e281c0313d4f3c5bbfbebb54c", "parents": [ "d3cf8b78782d3a3c471ab8e7de94ce7c47f95a70", "250c2e5734cb71037ad5de55ea23efb6b2ff6e5b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 03:06:06 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Jan 22 03:06:06 2012 -0800" }, "message": "Merge \"msm: board-msm7627a-display: Create separate board file for display\" into msm-3.0" }, { "commit": "5f968cf3da0f447e30284fbb1dfb1d82f1becee2", "tree": "9ffd5e39423e4c393fbe6cba39810cecf8272a41", "parents": [ "d3cf8b78782d3a3c471ab8e7de94ce7c47f95a70" ], "author": { "name": "Amit Blay", "email": "ablay@codeaurora.org", "time": "Sun Jan 22 12:04:01 2012 +0200" }, "committer": { "name": "Amit Blay", "email": "ablay@codeaurora.org", "time": "Sun Jan 22 12:06:20 2012 +0200" }, "message": "msm: board-9615: Update PID \u0026 serial number for DIAG\n\nUSB Driver writes PID \u0026 serial number of DIAG port to IMEM,\nsuch that DLOAD image could read and enumerate on the same\nserial port.\n\nChange-Id: I8a8f75256228c855e0d9404b959d1d8ef6687d56\nSigned-off-by: Amit Blay \u003cablay@codeaurora.org\u003e\n" }, { "commit": "b5b08e5e0eb873b1e0bc2556e0ca34dcca55ee18", "tree": "52859ab7abff95318edea617badf0fc7c93bf9cc", "parents": [ "d3cf8b78782d3a3c471ab8e7de94ce7c47f95a70" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Fri Jan 20 14:19:00 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Jan 22 00:43:07 2012 -0700" }, "message": "msm: bam_dmux: Handle DMA Mapping Failure\n\nHandle and recover from transient SPS and DMA\nmapping failures by:\n 1) Handle queue_rx() failures\n 2) Recover from failure by requeuing at next call\n 3) Properly unmap DMA items for failures\n 4) Log failures for later analysis\n\nCRs-Fixed: 330039\nChange-Id: I7c304921b7c4009d0c9733f317c2392241d51acc\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "d3cf8b78782d3a3c471ab8e7de94ce7c47f95a70", "tree": "236b93e5d0b6522c2016fe13ed3c6e80e88f9db9", "parents": [ "820424dee87475b67b51bf730cbd49eebf825dfb", "04d2c83ef2bf74e9a96e35751faf08f42528b9a3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 21:07:06 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 21:07:06 2012 -0800" }, "message": "Merge \"msm: board-8064: Add RIVA/WLAN voltage regulator supplies for 8064 target\" into msm-3.0" }, { "commit": "85f5e3341223679e6f7053eec9a5a68fc65355ef", "tree": "f5da7c4f58128e96466cfe4e41aabf0e9f6fdd2e", "parents": [ "5103c3ae368b1db81982dfdf9b989b24d93385cf", "f35fd738cb4155ac47c08c8db615237dc5e772ce" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 21:07:06 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 21:07:06 2012 -0800" }, "message": "Merge \"msm: iomap: Add QFPROM entry for TSENS\" into msm-3.0" }, { "commit": "5103c3ae368b1db81982dfdf9b989b24d93385cf", "tree": "c47e13f3b3d75a1c2b78d1a5a9a01bed6a03b2da", "parents": [ "d24aaeed10430946f6e4ac3f1caec825a9a94b7e", "4838f4164c1667556af26e0ece257ae745d987e9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 21:07:06 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 21:07:06 2012 -0800" }, "message": "Merge \"msm: bam_dmux: handle timeouts due to modem crash\" into msm-3.0" }, { "commit": "6a392d3a0730367efb4f65679995c2af50cbef2f", "tree": "39815458560e9182f84bb962e51f4b9573836cc7", "parents": [ "d24aaeed10430946f6e4ac3f1caec825a9a94b7e" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Jan 12 11:30:58 2012 -0800" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Sat Jan 21 18:12:42 2012 -0800" }, "message": "msm: 8930: Add ADC client\n\nAdd PA therm to the regulator list for LDO14. LDO14 is used\nto power the divider circuit for the PA Thermistor.\n\nChange-Id: Ic775efb3f0a24ff060776a4da92b1382e303aef6\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "2c43fac27a9198da023822ddc8eba0f938e953e0", "tree": "3803bb19b0cb28b60c15d8e682399dcf3b5c12d9", "parents": [ "f45e214c7416133ecb995533a23f23a33d908d07" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Thu Jan 19 11:06:37 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Sat Jan 21 17:47:55 2012 -0800" }, "message": "msm: board-8064: Add ION heap for Audio\n\nAdd 2.72MB ION heap for Audio to enable Audio\nto use ION for memory management. This ION heap\nwill replace pmem_audio pmem device.\n\nChange-Id: Ib98452278e08b53d4e392b225fffdb04de8530e5\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "f45e214c7416133ecb995533a23f23a33d908d07", "tree": "6300a5fbb7148c9645c577f6fe88b6e6644f3434", "parents": [ "d3d2968b11420501ce280b1c488cff14ea65bee7" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Thu Jan 19 11:01:01 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Sat Jan 21 17:47:51 2012 -0800" }, "message": "msm: board-8064: Add new heap for qse comm\n\nAdd new 1MB carveout heap required for Qualcomm Secure Executive (QSE)\ncommunications.\n\nChange-Id: I1071f6563474f8d2769c75baff68e3db06510057\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "d3d2968b11420501ce280b1c488cff14ea65bee7", "tree": "20886fb3d2a78b095b828985712f76c187abf3c3", "parents": [ "46bfffad6309a22b53ad1cc372a4a786a80e6f0e" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Thu Jan 19 10:57:07 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Sat Jan 21 17:47:47 2012 -0800" }, "message": "msm: board-8064: Add support for adjacent heaps\n\nION has to guarantee that the MM heap and FW heaps are\nadjacent to each other. This is due to a limitation\nin the hardware. Add code to ensure these heaps\nare adjacent.\n\nChange-Id: I714aaf89cc15122057b046066e53aff6c8921c24\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "46bfffad6309a22b53ad1cc372a4a786a80e6f0e", "tree": "334fac515c055344695174c6e754080b1d941457", "parents": [ "d76e3a8d7714b1cb806a815c3c8ea58000081466" ], "author": { "name": "Jack Cheung", "email": "jackc@codeaurora.org", "time": "Thu Jan 19 15:26:24 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Sat Jan 21 17:47:42 2012 -0800" }, "message": "msm: board-8064: Handle unstable section overflow\n\nIf the calculation for \u0027high\u0027 overflows, it is set to\n0xFFFFFFFF. This will cause the unstable region to be\naligned in the wrong way.\n\nThis change avoids the overflow by subtracting the\nMIN_MEMORY_BLOCK_SIZE before adding the membank size.\n\nChange-Id: Ided0557e2b1d14bbc3742d5a833674cde918d539\nSigned-off-by: Jack Cheung \u003cjackc@codeaurora.org\u003e\n" }, { "commit": "d76e3a8d7714b1cb806a815c3c8ea58000081466", "tree": "0dfa0661db55223a2de8d9eb6375066aa5a6ea60", "parents": [ "c362a4e18a530d5ceb2d14031398b08b225b03ad" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Mon Jan 16 16:55:07 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Sat Jan 21 17:47:38 2012 -0800" }, "message": "msm: board-8064: Fix overflow in memory calc.\n\nAn overflow occurs in locate_unstable_memory() when physical\nmemory address space ends at 0xFFFFFFFF. Change code to\nhandle overflow by ensuring that variables are limited to\n0xFFFFFFFF and by rearranging additions and subtractions.\n\nChange-Id: I11cb890c09ef18fe7c103cbdf1232677704fcc17\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "c362a4e18a530d5ceb2d14031398b08b225b03ad", "tree": "d2d4503a018ca4843fb0050e831537efffcbf72e", "parents": [ "642729a61fe016243b9538ecd18e20ef08b16b66", "b760323c5ca321c3b9daf00f374e4b2b87fd641a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 14:43:02 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 14:43:02 2012 -0800" }, "message": "Merge changes I84b3ca1e,I41db99f8 into msm-3.0\n\n* changes:\n ASoc: msm: Add support for adie RX \u0026 TX calibration\n Revert \"msm: audio: qdsp6v2: Support for out-of-band calibration\"\n" }, { "commit": "c1015b37ae4ecab4aa031554565718b95b8c2354", "tree": "24af218706deaa2364a5491792bcf81ba68cac92", "parents": [ "bd54ba08ea97285444b5f16d9b637f6d58ecca16", "3efebb52ee799e91d0fe5f820fe87a19f1e333c0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 11:43:03 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 11:43:04 2012 -0800" }, "message": "Merge \"msm: kgsl: Update graphic\u0027s bandwidth vote to match the new clock plan\" into msm-3.0" }, { "commit": "0505835884aa3be65089b809b6c06780d40c373c", "tree": "8af3448ba23c14227419e222097bc9194b4f87f6", "parents": [ "ae2b5ab8c72ed768d31abefeec99af445f073dc2" ], "author": { "name": "Sreesudhan Ramakrish Ramkumar", "email": "srramku@codeaurora.org", "time": "Tue Dec 06 09:40:21 2011 -0800" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 08:46:07 2012 -0700" }, "message": "defconfig: msm8960: enable S5K3L1YX config\n\nChange-Id: I4fb8c11ee7d817275e1bda2c2d56b03370ff46b9\nSigned-off-by: Sreesudhan Ramakrish Ramkumar \u003csrramku@codeaurora.org\u003e\n" }, { "commit": "bd54ba08ea97285444b5f16d9b637f6d58ecca16", "tree": "98881f76bf79611d11794fb45158a61df6bf98fd", "parents": [ "ae2b5ab8c72ed768d31abefeec99af445f073dc2", "60eaeabda563156525247dc6e19480a2caa244f5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 07:38:45 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 07:38:45 2012 -0800" }, "message": "Merge \"msm: board-8960: Handle unstable section overflow\" into msm-3.0" }, { "commit": "ae2b5ab8c72ed768d31abefeec99af445f073dc2", "tree": "b0cfa1582155a5b607f41baad71b423d61237b11", "parents": [ "12f522c922a7d30379dc91bd72e111195a414b48", "4b931ed127737e1cd97c29f576d0606d7f0fb644" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 04:44:57 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 04:44:57 2012 -0800" }, "message": "Merge \"msm: smd: fix legacy DS port registration\" into msm-3.0" }, { "commit": "a374881a3a401beab2a476f35acf0c43470fe68e", "tree": "6e0a80d87af3f226038a9e853728f523d7589558", "parents": [ "41dfc8d7d0c991f5fd7f2276772d26f57930aae0", "bedd1e89b4b45c91ba508a299e9f1607824a07d0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Jan 21 01:32:06 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Jan 21 01:32:06 2012 -0800" }, "message": "Merge changes I19782fbe,I506ba0e0,Ie793932c,Ic92995ec,I611bce3e into msm-3.0\n\n* changes:\n defconfig: msm-copper: Enable SPARSE_IRQ\n msm: board-dt: Convert to use 0 preallocated interrupts\n arm: irq: Allow for specification of no preallocated irqs\n msm: msmcopper: Increase NR_MSM_IRQS to 1020\n msm: board-copper: Convert gic to use of_irq_init API\n" }, { "commit": "59c90ec4a8d5a2fbbba469fc80d7a167db639073", "tree": "116c93aee61bc04e60f0655499b0ce508020a1f7", "parents": [ "5fedce4a0ea3996a4ee0246b80065fbdb5dd37e2" ], "author": { "name": "Laxminath Kasam", "email": "lkasam@codeaurora.org", "time": "Fri Jan 13 15:41:58 2012 +0530" }, "committer": { "name": "Laxminath Kasam", "email": "lkasam@codeaurora.org", "time": "Sat Jan 21 13:08:33 2012 +0530" }, "message": "msm: arch-msm: msm8x60: Fix FTM devices issue.\n\n-FTM devices are not getting listed in mm-audio-alsa-test.\nFTM Verification fails.\n-Update board file to add FTM devices to final device list.\n\nChange-Id: Ibb0b23195e4e976a867f30f9b16c630e2e5e88fa\nCRs-Fixed: 326843\nSigned-off-by: Laxminath Kasam \u003clkasam@codeaurora.org\u003e\n" }, { "commit": "1a7ee899043514496a5a385fe43bc51ab9facbc8", "tree": "f0017ca1be126b6520b7a3d67598fefe152ee614", "parents": [ "41dfc8d7d0c991f5fd7f2276772d26f57930aae0" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Tue Jan 17 18:56:28 2012 -0800" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Fri Jan 20 22:53:19 2012 -0800" }, "message": "msm: footswitch: Move to new clock APIs\n\nWhat was once done by just clk_enable() is being split into two\nfunctions: clk_prepare() and clk_enable(), where the prepare\nfunction may sleep but the enable function will not. The same\nis true for the clk_disable() function.\n\nReplace use of clk_enable() and clk_disable() with calls to\nclk_prepare_enable() and clk_disable_unprepare(), respectively.\nThese macros are combinations of the APIs described above and\nare safe to use in the footswitch driver since they are not\ncalled from atomic context.\n\nChange-Id: Ic51e17304f0a046d213226b1e93c7f71ef3d9a9b\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "b760323c5ca321c3b9daf00f374e4b2b87fd641a", "tree": "9f910b1358c20f16492348c9370dfb0d7e6b1e02", "parents": [ "c1bb79eed349ca789edb4c62a5d309f00066e963" ], "author": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Wed Nov 23 17:16:27 2011 -0800" }, "committer": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Fri Jan 20 17:10:55 2012 -0800" }, "message": "ASoc: msm: Add support for adie RX \u0026 TX calibration\n\nAdd support for adie RX \u0026 TX calibration. This calibration\nis used for RMC and speaker protection. A non-blocking\nfunction was created for AFE memory map since it is now\nbeing called from an atomic process and the acdb driver\nwas changed to use to use atomic variables.\n\nChange-Id: Id6c6ca7a303ef5ee5d23a9932e910e6a7a08805d\nSigned-off-by: Ben Romberger \u003cbromberg@codeaurora.org\u003e\n" }, { "commit": "c1bb79eed349ca789edb4c62a5d309f00066e963", "tree": "e21288d14d5568d3cc610198c86611963732f75f", "parents": [ "7c6b53848cd011712a69f3f0a92e19a44ea6c946" ], "author": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Fri Jan 13 21:48:35 2012 -0800" }, "committer": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Fri Jan 20 17:08:22 2012 -0800" }, "message": "Revert \"msm: audio: qdsp6v2: Support for out-of-band calibration\"\n\nThis reverts commit b4f562ae36c45a1f0df24f7606e2eeb34f9a9aa3.\nThe above patch incorrectly packs voice volume calibration.\n\nChange-Id: I41db99f8716c2ee4a7367d118b7b901f549dba2f\nSigned-off-by: Ben Romberger \u003cbromberg@codeaurora.org\u003e\n" }, { "commit": "41dfc8d7d0c991f5fd7f2276772d26f57930aae0", "tree": "cc00d7c7502f4b55e44bbc76ad84e7ef2dbd99d5", "parents": [ "7c6b53848cd011712a69f3f0a92e19a44ea6c946", "82b7e3fafcc8a6749e61b0854da79c93f6082faf" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 16:56:08 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 16:56:08 2012 -0800" }, "message": "Merge \"msm: 8064: Add machine records for cdp, mtp and liquid.\" into msm-3.0" }, { "commit": "04d2c83ef2bf74e9a96e35751faf08f42528b9a3", "tree": "c6524331f279b3e25b5f4250d8e6e7766d057329", "parents": [ "7c6b53848cd011712a69f3f0a92e19a44ea6c946" ], "author": { "name": "Subramanian Srinivasan", "email": "subrsrin@codeaurora.org", "time": "Tue Jan 17 11:26:36 2012 -0800" }, "committer": { "name": "Subramanian Srinivasan", "email": "subrsrin@codeaurora.org", "time": "Fri Jan 20 16:22:47 2012 -0800" }, "message": "msm: board-8064: Add RIVA/WLAN voltage regulator supplies for 8064 target\n\nProvides RIVA/WLAN regulator mappings for 8064 target.\nAdds support for RIVA in APQ 8064 target.\n\nChange-Id: Id8d977169d7fe7ff03770725caf4ec3b84551701\nSigned-off-by: Subramanian Srinivasan \u003csubrsrin@codeaurora.org\u003e\n" }, { "commit": "4838f4164c1667556af26e0ece257ae745d987e9", "tree": "2f1b0bc6e934fc7afbf11302fd9efa0ff83cfa26", "parents": [ "7c6b53848cd011712a69f3f0a92e19a44ea6c946" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Fri Jan 20 11:19:37 2012 -0700" }, "committer": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Fri Jan 20 17:18:17 2012 -0700" }, "message": "msm: bam_dmux: handle timeouts due to modem crash\n\nIf bam_dmux times out waiting for a response from the modem, we assume it\nhas crashed. Therefore, prepare for modem restart if enabled, otherwise\nreport the error with BUG as we are in an unrecoverable state\n\nChange-Id: I5f2419eae721a735a2396693da9fa2d28b14f122\nCRs-Fixed: 331808\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n" }, { "commit": "a0d95f738886519a95c8aaae1a8a281510ce5128", "tree": "5cdf8944dab128abee8cd6fc2c22efe9cab7a6b0", "parents": [ "55379fa4b4f5214e89f35783b47b1be7d5c9f9f5", "6074aba266f680045e4f4978711c1999e12f5ee6" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 14:12:37 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 14:12:37 2012 -0800" }, "message": "Merge changes I05a7d9c4,Ib568df71,Ibd79e983 into msm-3.0\n\n* changes:\n msm: bam_dmux: Prevent UL Powerdown due to modem flow control\n msm: bam_dmux: cleanup ioremap_nocache() handle during error handling\n msm: bam_dmux: extend tx list lock around sps_transfer_one()\n" }, { "commit": "a6d84e4596b0797673f4a1ce35f9374d2491bbdc", "tree": "23aef293dbfdc76ee0b4741ad9baedc256ec50a4", "parents": [ "1aa4848c00a370a2d7cf5d779da055fce19f037d", "2235a405d803fd372c7c343cac10de6105462e03" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 11:49:25 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 11:49:25 2012 -0800" }, "message": "Merge \"msm: msm_bus: Fix aggregation of clocks in active-only context\" into msm-3.0" }, { "commit": "3efebb52ee799e91d0fe5f820fe87a19f1e333c0", "tree": "5564df230c0b11f201fb0b445b81ffffc53669b6", "parents": [ "10e435cc9b836a71dc648d5e752d1614d517ec67" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Tue Jan 17 12:58:38 2012 -0700" }, "committer": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Fri Jan 20 11:10:50 2012 -0700" }, "message": "msm: kgsl: Update graphic\u0027s bandwidth vote to match the new clock plan\n\nGraphics lowest power level is designed to run at SVS. The bandwidth\nmust be lowered to hit that target.\n\nChange-Id: I8aea654ab9aafba89b4773174ea339766573c3f3\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "60eaeabda563156525247dc6e19480a2caa244f5", "tree": "67a4b8a39bcc402a57980cafc5ea6c1e71a3861b", "parents": [ "797bef9b610ca70e41c925febd8cf1d5fed0f3c6" ], "author": { "name": "Jack Cheung", "email": "jackc@codeaurora.org", "time": "Mon Jan 09 16:40:26 2012 -0800" }, "committer": { "name": "Jack Cheung", "email": "jackc@codeaurora.org", "time": "Fri Jan 20 09:50:24 2012 -0800" }, "message": "msm: board-8960: Handle unstable section overflow\n\nIf the calculation for \u0027high\u0027 overflows, it is set to\n0xFFFFFFFF. This will cause the unstable region to be\naligned in the wrong way.\n\nThis change avoids the overflow by subtracting the\nMIN_MEMORY_BLOCK_SIZE before adding the membank size.\n\nChange-Id: Ie2b5f2ce0a6ddc6cdffa7554957bd458cf744e5d\nSigned-off-by: Jack Cheung \u003cjackc@codeaurora.org\u003e\n" }, { "commit": "77670789ba0be416e639ec8939964acd4c4a8693", "tree": "8d5fb3ce7c29da159699625bf52df6d702d34415", "parents": [ "296ee48e9ac0cc8a3df3eaa5a24131a700c2974b", "36466aee75e3bd66a8b79ba23ea00b59d883546e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 08:40:30 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 08:40:30 2012 -0800" }, "message": "Merge \"msm: clock-8960: Switch adm to ebi1_clk\" into msm-3.0" }, { "commit": "4817058084e7dbc2c10e7056d1e4528dc6a06091", "tree": "3d67daf2d350476c421ceb7e1b4294428ef2bc6e", "parents": [ "646bd33dd3d3de43fc8c748692a47fe641def8d7", "fc81e10421b055303c2459fd52e19a57e2aff31e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 05:40:25 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 05:40:26 2012 -0800" }, "message": "Merge \"msm-camera: Add support for YV12 preview format\" into msm-3.0" }, { "commit": "ed61ae65262a2327ad0287793ed2be801c019570", "tree": "b5c581d07f9844c0250400579c1ae04e8daa30c0", "parents": [ "089ec2e761dcffc2c2e3fda6dee59d74f481374b" ], "author": { "name": "Laxminath Kasam", "email": "lkasam@codeaurora.org", "time": "Fri Jan 20 17:12:36 2012 +0530" }, "committer": { "name": "Laxminath Kasam", "email": "lkasam@codeaurora.org", "time": "Fri Jan 20 17:59:51 2012 +0530" }, "message": "msm: 8660: audio: Fix tones issue on headset in FTM.\n\n-Play tones in FTM mode,for testcase 1 it is expected to\nplay only on left headset but audible in both\nL\u0026R headset.\n-The device profile is enabling the right channel also,\nwhere the test case is to enable only the left channel.\n-changed the register 0x31 with 0xC5(disabling the\nright channel),this will fix the issue.\n\nChange-Id: I17331f6f2ea8d40c47e5720ae262458536f44094\nCRs-Fixed: 332075\nSigned-off-by: Laxminath Kasam \u003clkasam@codeaurora.org\u003e\n" }, { "commit": "646bd33dd3d3de43fc8c748692a47fe641def8d7", "tree": "5b9b42f51efd2587bfb0053b1aea79981f9445e2", "parents": [ "87c8d39d245b3ea0311e97e579ee5f83bb99ba25", "d01fd83bf9182b0a37abb3c4a2b9cd5e8ced4bd5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 04:12:37 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 04:12:37 2012 -0800" }, "message": "Merge \"msm: 8960: Add correct PASR mask support\" into msm-3.0" }, { "commit": "fc81e10421b055303c2459fd52e19a57e2aff31e", "tree": "6691734a02eb9d08e7cfb08c0ce4fa8a2a961c69", "parents": [ "34cf1fc16a9b1e358dbb7b452eb993e0f217036d" ], "author": { "name": "Alekhya,Monika", "email": "malekh@codeaurora.org", "time": "Thu Dec 29 15:17:33 2011 +0530" }, "committer": { "name": "Alekhya,Monika", "email": "malekh@codeaurora.org", "time": "Fri Jan 20 17:12:20 2012 +0530" }, "message": "msm-camera: Add support for YV12 preview format\n\nEnable camera driver to output preview frames in YV12 format.\n\nChange-Id: Ib4e358460eb922c6a06314682380c4de30f81319\nSigned-off-by: Alekhya,Monika \u003cmalekh@codeaurora.org\u003e\n" }, { "commit": "250c2e5734cb71037ad5de55ea23efb6b2ff6e5b", "tree": "cfee6abfb1e60a3d30a973b375ebd004e1a0a78d", "parents": [ "34cf1fc16a9b1e358dbb7b452eb993e0f217036d" ], "author": { "name": "Chintan Pandya", "email": "cpandya@codeaurora.org", "time": "Thu Jan 19 17:15:49 2012 +0530" }, "committer": { "name": "Chintan Pandya", "email": "cpandya@codeaurora.org", "time": "Fri Jan 20 15:05:07 2012 +0530" }, "message": "msm: board-msm7627a-display: Create separate board file for display\n\nVarious variants of 7627a uses common display code which is\nduplicated over multiple board files. So, move out the common\ncode for display into separate board file to avoid rebase\nissues during new board bring up and maintenance.\n\nChange-Id: Ibf3558e5b26dfbd9f056c0f5f78f4bf8573ca642\nSigned-off-by: Chintan Pandya \u003ccpandya@codeaurora.org\u003e\n" }, { "commit": "34cf1fc16a9b1e358dbb7b452eb993e0f217036d", "tree": "6e836210dc3e7361f2110d0814723fe95427dad5", "parents": [ "a56f880f2bc20182c1ffa4ca25a9799fca93bc94", "66f7f1ea5a32845eed2d2472cf5b7793f463577e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 20 00:58:58 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 20 00:58:58 2012 -0800" }, "message": "Merge changes I8c9958ad,I245935fa into msm-3.0\n\n* changes:\n msm: bam_dmux: use non-interruptable variants of wait_for_completion\n msm: bam_dmux: Add error checking for debugfs nodes\n" }, { "commit": "82b7e3fafcc8a6749e61b0854da79c93f6082faf", "tree": "d6a15b7e9c46925837d6ff39b47c91a0e1a11cbc", "parents": [ "36eaeddad9402758f44fbaf56ea8ffdc9ba28eea" ], "author": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Thu Jan 05 10:03:27 2012 -0800" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 23:52:54 2012 -0700" }, "message": "msm: 8064: Add machine records for cdp, mtp and liquid.\n\nAlso add Kconfig and defconfig configuration\nto enable them for the apq8064 device..\n\nChange-Id: Ia7d78a9e1c65f90002403becd90a25adb5da0119\nSigned-off-by: Joel King \u003cjoelking@codeaurora.org\u003e\n" }, { "commit": "39cd52e9df9add585435fd950740c0a3636e9610", "tree": "550432f43f095ac7dc1e50db516422d5ebec79af", "parents": [ "36eaeddad9402758f44fbaf56ea8ffdc9ba28eea", "2a9060429599c4ac9bdacf8a84e198cd28e6121e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 22:42:17 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 22:42:18 2012 -0800" }, "message": "Merge \"msm: board-msm7627a-bt: Allow BT SOC to be held in RESET\" into msm-3.0" }, { "commit": "72523739e4577dcc679ba3aa38b14c2f908d5020", "tree": "e5e477bc8a8d7bebfd6d4ce73e894c292a121644", "parents": [ "a7a7620b0876ae703458dfac22818e41c3e7f9fd", "df314b4a0f1869a6789bac887c65c9085b2ff5d7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 18:55:28 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 18:55:28 2012 -0800" }, "message": "Merge \"msm: clock-9615: Add HSIC peripheral device clocks\" into msm-3.0" }, { "commit": "21b3a0fae9086433415f59eb769cf4774366f10f", "tree": "df7638d5437c1ede48dc82f1012800972f81b4c2", "parents": [ "87b57c9b8648fbfe7a825a3d97944a4d0253a673", "8a7a5d3982cdedc441f2da8c31846da4e0a72917" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 17:33:48 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 17:33:48 2012 -0800" }, "message": "Merge \"msm: 8064: Add fabric devices to enable bus scaling on 8064\" into msm-3.0" }, { "commit": "0652ee4b0e6a61811117a2957c20dac1021129d4", "tree": "b02deb67fb63e84dce866ec671de20dd3a2653b7", "parents": [ "58e5babc00a84a8bbec21aaefb8328888a03df82", "40ec7e905181bfda1133a689552b585014db4960" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 14:59:10 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 14:59:10 2012 -0800" }, "message": "Merge \"msm: 8930: Add SDC1 and SDC3 platform data\" into msm-3.0" }, { "commit": "1980cb37f5e0bf7698230b0794fe45d3495346cb", "tree": "1291cc0fbeb87204310e6b5b4ca6b615b15fc8b2", "parents": [ "0f7e3d058749efd3d875d3dffe77f793eec85720", "7355db013022a7db136dfef700a7f32d039a8bcb" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 13:23:10 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 13:23:10 2012 -0800" }, "message": "Merge changes Icc844d30,I527768f0,If1cd6dda,I8cc87d5a into msm-3.0\n\n* changes:\n msm: board: Add ION heap for Audio\n msm: board: Increase ION MM heap size\n msm: board: Restore SF and MM heap to PMEM sizes\n gpu: ion: Add new heap for qse comm\n" }, { "commit": "36466aee75e3bd66a8b79ba23ea00b59d883546e", "tree": "bcb448fa06e216bb1f7dd7f71bfe1b663fdb43f9", "parents": [ "949f2c999c468f4c3c6b92fcdef71879fe1af652" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Wed Jan 18 20:58:27 2012 -0800" }, "committer": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Thu Jan 19 12:41:43 2012 -0800" }, "message": "msm: clock-8960: Switch adm to ebi1_clk\n\nBefore the bus driver was voting on ebi1_clk we needed to have\nadm use a dummy clock so that ebi1 wasn\u0027t voted off when adm no\nlonger used ebi1. Now that the bus driver is voting on ebi1\ncorrectly, remove this workaround so that ebi1 stays out of self\nrefresh when a data mover transaction is occurring during power\ncollapse.\n\nChange-Id: I74e6209271aa2a18e40c972ead8325c70c11e836\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "f35fd738cb4155ac47c08c8db615237dc5e772ce", "tree": "2451d677d9bf81dab07f1439bb3baf8fbef500e0", "parents": [ "0c80c1a1ebd7efea39e97b52c94b6fa40a4798b8" ], "author": { "name": "Vijayakumar Muthuvel Manickam", "email": "vmuthuve@codeaurora.org", "time": "Fri Jan 13 16:17:52 2012 -0800" }, "committer": { "name": "Vijayakumar Muthuvel Manickam", "email": "vmuthuve@codeaurora.org", "time": "Thu Jan 19 12:33:41 2012 -0800" }, "message": "msm: iomap: Add QFPROM entry for TSENS\n\nAdd QFPROM address entry where the calibration data for\ntemperature sensors are stored. Calibration data\nis needed for converting the adc code read from\nsensors to temperature value\n\nChange-Id: If90aa4051d62d6fcbb286d111f34250a0ff5ef43\nSigned-off-by: Vijayakumar Muthuvel Manickam \u003cvmuthuve@codeaurora.org\u003e\n" }, { "commit": "bedd1e89b4b45c91ba508a299e9f1607824a07d0", "tree": "9e9db8fc2f78a2adaebdcc1500cb65b09195a070", "parents": [ "ce4b20b3d79cb2785527fa36620252dac23b5259" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Fri Jan 06 10:07:38 2012 -0800" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Thu Jan 19 12:26:57 2012 -0800" }, "message": "defconfig: msm-copper: Enable SPARSE_IRQ\n\nSPARSE_IRQ is used to support our future PMIC designs, which have\nup to 32768 theoretical interrupts. Without this feature,\nsupporting this device would cost huge amounts of memory.\n\nEnabling this feature has a small performance hit since\nirq_to_desc() is now implemented with a radix tree lookup.\nHowever, the measured cost of this lookup is small compared to\nthe functional benefit we gain from this.\n\nChange-Id: I19782fbe9f995c1770b78fb8d22430ac5cebf8b4\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "ce4b20b3d79cb2785527fa36620252dac23b5259", "tree": "b47811d6a9b947c4e84798672681ad5d977750fa", "parents": [ "0bb2b56f7048b2f85be6784eaa8e4a5f0fa8688d" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Fri Jan 06 15:59:39 2012 -0800" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Thu Jan 19 12:26:48 2012 -0800" }, "message": "msm: board-dt: Convert to use 0 preallocated interrupts\n\nSince all interrupt chip drivers on the platform allocate their\ndescriptors at runtime, let\u0027s specify to not preallocate\nanything.\n\nChange-Id: I506ba0e07ec1e2daecd95d239586154e45f19917\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "0bb2b56f7048b2f85be6784eaa8e4a5f0fa8688d", "tree": "defe70657dd3d39e2377ee1eb92dbd592d805f9c", "parents": [ "3372c0dd36698a9cfbea56e95319e7e9c3790852" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Fri Jan 06 15:44:26 2012 -0800" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Thu Jan 19 12:26:40 2012 -0800" }, "message": "arm: irq: Allow for specification of no preallocated irqs\n\nFor cases with SPARSE_IRQ enabled, irqs preallocated with\narch_probe_nr_irqs() are already marked as allocated in the\nallocated_irqs bitmap. As a consequence, irq chip drivers that\nallocate irqs will feel one of two behaviors:\n\n1. An allocation will succeed with the starting irq_base one\nmore than the preallocated irqs. This will thus waste the\npreceeding interrupt resources that were preallocated, unless a\nlegacy chip driver happens to assume ownership of these by some\nplatform definition. The GIC driver is a typical primary chip\ndriver, and abides to the allocation APIs. So this can be a\nproblem in many trivial usecases.\n\n2. An allocation will fail with \u003c 0. This can also happen in the\nGIC driver, which interprets this value as meaning the irq_descs\nare already preallocated. But in Device Tree configurations, the\nfallback irq_base is -1. This results in an invalid irq_base\nvalue.\n\nLooking forward, we are moving towards a world where preallocation\nof irqs is no longer necessary. irq_domain is scoped to handle all\nirq_desc allocations in the future. Thus, we should support\nconfigurations where the platform wants to preallocate no irqs.\n\nOne easy way to achieve this is to allow for\nmachine_desc-\u003enr_irqs \u003c 0, which indicates not to preallocate any\ninterrupts.\n\nChange-Id: Ie793932c58de72c1b91b6e039b77a8e5d64ecc75\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "6074aba266f680045e4f4978711c1999e12f5ee6", "tree": "54cd2b99e416079775db603f553ba697363aa3c4", "parents": [ "4b2890dbebc209c91738050ab7141f47138fc98e" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Wed Jan 18 17:59:44 2012 -0700" }, "committer": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Thu Jan 19 13:24:24 2012 -0700" }, "message": "msm: bam_dmux: Prevent UL Powerdown due to modem flow control\n\nIf the modem flow controls, then a temporary data stall could\noccur that may exceed the UL timeout. This would result in\nthe UL Vote getting removed with packets pending. Instead,\nthis change will defer the timeout and print a warning\nmessage.\n\nCRs-Fixed: 329140\nChange-Id: I05a7d9c4d78b4ad832041427625e76a9baa95cb0\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "3372c0dd36698a9cfbea56e95319e7e9c3790852", "tree": "772d265f69cbfd3613050a85c3047ef642412f6f", "parents": [ "c722453d58b623b8f9cffe3a5e28e513ab0a3e45" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Wed Jan 11 18:28:45 2012 -0800" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Thu Jan 19 12:14:35 2012 -0800" }, "message": "msm: msmcopper: Increase NR_MSM_IRQS to 1020\n\nDue to a bug in simulation on 8974, the QGIC specifies that\nit supports up to 1020 interrupts. Until this is resolved,\nlet\u0027s change this define to avoid errors.\n\nChange-Id: Ic92995ec5d449e18c7b7cc6fd1c96f8bcd39a583\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "c722453d58b623b8f9cffe3a5e28e513ab0a3e45", "tree": "a78114badc05e0608f9636089fe79a7212424847", "parents": [ "0c80c1a1ebd7efea39e97b52c94b6fa40a4798b8" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Fri Jan 06 16:02:52 2012 -0800" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Thu Jan 19 12:14:35 2012 -0800" }, "message": "msm: board-copper: Convert gic to use of_irq_init API\n\nThe GIC driver has been recently changed to support Device Tree.\nMake changes to use the Device Tree interrupt framework intialize\nthe GIC instead of invoking it manually.\n\nChange-Id: I611bce3e8662583ba66553fd7ec37eac83b60388\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "51e08eab2095409d3c380d808f140a0a1a54fedb", "tree": "a5b4f54d0270b1450478b5471e50dabdb591a2d9", "parents": [ "32a110abcebdcc0d319330951440f5d651c19385", "69425ffb7f4c483ed368f39aa4957132fd97c181" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 11:52:58 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 11:52:58 2012 -0800" }, "message": "Merge \"ARM: 6993/1: platsmp: Allow secondary cpu hotplug with maxcpus\u003d1\" into msm-3.0" }, { "commit": "d01fd83bf9182b0a37abb3c4a2b9cd5e8ced4bd5", "tree": "0045f564f786c8f741f08825b42dad71ec38f5dc", "parents": [ "089ec2e761dcffc2c2e3fda6dee59d74f481374b" ], "author": { "name": "Jack Cheung", "email": "jackc@codeaurora.org", "time": "Fri Jan 13 22:59:57 2012 -0800" }, "committer": { "name": "Jack Cheung", "email": "jackc@codeaurora.org", "time": "Thu Jan 19 10:35:51 2012 -0800" }, "message": "msm: 8960: Add correct PASR mask support\n\nThe current system does not use the correct PASR masks for turning\noff sections of memory. It will also crash if the SPARSEMEM section_size\nis changed to smaller values.\n\nThis fix calculates the correct masks and removes the dependency on\nthe SPARSEMEM section_size. It will accurately calculate the mask\nregardless of memory size and configuration.\n\nMAX_NR_REGIONS has been increased to 32 to account for the largest\nsystem containing four memory banks, each divided into 8 sections.\n\nChange-Id: Idaf05a06c1430e6d353fddafa305b57e400dfb8c\nCRs-fixed: 329575\nSigned-off-by: Jack Cheung \u003cjackc@codeaurora.org\u003e\n" }, { "commit": "949f2c999c468f4c3c6b92fcdef71879fe1af652", "tree": "3eadc43947fbaad17f4e038c6703bd27973ca82c", "parents": [ "e52e81b7e3470889963a6b1d104ffc7107d54ab3", "d9a4173222de868e13a192ab15b88f3f7821c796" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 10:02:45 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 10:02:45 2012 -0800" }, "message": "Merge \"msm: iomap-8064: Add RPM, SAW-L2 and SAW-CPU memory map\" into msm-3.0" }, { "commit": "4b2890dbebc209c91738050ab7141f47138fc98e", "tree": "2ab09331685cf099ec272c973814ea52da20efa0", "parents": [ "bb6da9546e90fc34b1f42e1f41e3b474810f5d36" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Mon Jan 16 16:14:21 2012 -0700" }, "committer": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Thu Jan 19 10:03:41 2012 -0700" }, "message": "msm: bam_dmux: cleanup ioremap_nocache() handle during error handling\n\niounmap() needs to be called during error handling to cleanup the handle\nreturned by ioremap_nocache(), otherwise an unused hardware io to virtual\nmemory mapping will remain for the duration of system execution.\n\nChange-Id: Ib568df713dcb3e4ec254df4bf76213c895554dd1\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n" }, { "commit": "bb6da9546e90fc34b1f42e1f41e3b474810f5d36", "tree": "ec72f3e31450b95a42edc5486a6c6fe5adf6c4be", "parents": [ "66f7f1ea5a32845eed2d2472cf5b7793f463577e" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Mon Jan 16 15:02:42 2012 -0700" }, "committer": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Thu Jan 19 10:02:41 2012 -0700" }, "message": "msm: bam_dmux: extend tx list lock around sps_transfer_one()\n\nThe tx list must be kept in sync with the packets queued to BAM via\nsps_transfer_one(). Releasing the tx list lock allows a small window\nto exist where the tx list could lose sync and possibly cause a crash\nlater on. Since sps_transfer_one() can be run in atomic context, do\nnot release the list lock until after sps_transfer_one() returns.\n\nChange-Id: Ibd79e983c04a1e050ec83252d0156844f6af3594\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n" }, { "commit": "66f7f1ea5a32845eed2d2472cf5b7793f463577e", "tree": "c3fd189f830d9740812556db2f61e07c1f69299c", "parents": [ "e4ac80bab7f322451191c0cf0f8a7c246e21a5d9" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Mon Jan 16 14:30:42 2012 -0700" }, "committer": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Thu Jan 19 10:00:14 2012 -0700" }, "message": "msm: bam_dmux: use non-interruptable variants of wait_for_completion\n\nUsing interruptible variants of wait_forcompletion is unnecessary in\nbam_dmux and adds useless complexity to the error handling code.\nMove to non-interruptible variants to simplify things.\n\nChange-Id: I8c9958ad3b43d4cb8c76d712abbdebdbd3ca32f1\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n" }, { "commit": "e4ac80bab7f322451191c0cf0f8a7c246e21a5d9", "tree": "58ef85a8d75bfefab93647a23353b981995c5cdc", "parents": [ "ca6a61e107c7010ea7f719cbf853841278e6d318" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Thu Jan 12 09:21:59 2012 -0700" }, "committer": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Thu Jan 19 09:59:42 2012 -0700" }, "message": "msm: bam_dmux: Add error checking for debugfs nodes\n\nAdd error checking to prevent silent failures for\ndebugfs support.\n\nChange-Id: I245935fa76e79fdb24313f9ba010209e56b74cd0\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n" }, { "commit": "2a9060429599c4ac9bdacf8a84e198cd28e6121e", "tree": "b5b2e0f45402d21fc9f6f6bdf263ad6a97ec5407", "parents": [ "089ec2e761dcffc2c2e3fda6dee59d74f481374b" ], "author": { "name": "Rahul Kashyap", "email": "rkashyap@codeaurora.org", "time": "Thu Jan 12 19:10:05 2012 +0530" }, "committer": { "name": "Rahul Kashyap", "email": "rkashyap@codeaurora.org", "time": "Thu Jan 19 18:11:03 2012 +0530" }, "message": "msm: board-msm7627a-bt: Allow BT SOC to be held in RESET\n\nIncorrect handling of BT gpio config on EVB is resulting\nin the SOC being out of RESET.\n\nCRs-fixed: 330277\nChange-Id: I20a566cd5170b629682ab681e6208c25d82141af\nSigned-off-by: Rahul Kashyap \u003crkashyap@codeaurora.org\u003e\n" }, { "commit": "df314b4a0f1869a6789bac887c65c9085b2ff5d7", "tree": "5b1bb8e6834a6a85f285fe4d0c0bde34dcbc3331", "parents": [ "ca6a61e107c7010ea7f719cbf853841278e6d318" ], "author": { "name": "Ofir Cohen", "email": "ofirc@codeaurora.org", "time": "Sun Jan 15 11:59:34 2012 +0200" }, "committer": { "name": "Ofir Cohen", "email": "ofirc@codeaurora.org", "time": "Thu Jan 19 12:55:40 2012 +0200" }, "message": "msm: clock-9615: Add HSIC peripheral device clocks\n\nAdd HSIC peripheral device clocks to 9615.\nClock names are updated to match the new naming convention.\n\nChange-Id: Iea1357f3537ec2e57e04bec1d27cbd5a567533b8\nSigned-off-by: Ofir Cohen \u003cofirc@codeaurora.org\u003e\n" }, { "commit": "8a7a5d3982cdedc441f2da8c31846da4e0a72917", "tree": "03279c480c57ffece3c9e1662292b098f37502bf", "parents": [ "ca6a61e107c7010ea7f719cbf853841278e6d318" ], "author": { "name": "Gagan Mac", "email": "gmac@codeaurora.org", "time": "Fri Nov 11 16:43:06 2011 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 03:50:50 2012 -0700" }, "message": "msm: 8064: Add fabric devices to enable bus scaling on 8064\n\nAdd fabric devices to the kernel tree by listing them in\ninitialization data to enable bus scaling on APQ8064\n\nChange-Id: Id56fbfde410f7bd268de7111eae0752eab733d59\nSigned-off-by: Gagan Mac \u003cgmac@codeaurora.org\u003e\n" }, { "commit": "ca6a61e107c7010ea7f719cbf853841278e6d318", "tree": "90ae4cc7e34e638e537281c342d01da8eb0abf11", "parents": [ "369bafccfc73981f957f7aa3872f9b6fe37fbec0", "b0f4036c4afacdd6817acf3584d62aaf19c09202" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "message": "Merge changes I4917de40,Id64bc384,Iae5182ff into msm-3.0\n\n* changes:\n mfd: pm8038-core: enable bms and charger devices\n msm: 8930: enable charger, bms and ccadc\n mfd: pm8xxx: add charger, bms and ccadc devices on PM8038\n" }, { "commit": "369bafccfc73981f957f7aa3872f9b6fe37fbec0", "tree": "843f7e1bb39163515693f2db6911a5ca6cbe4346", "parents": [ "973454460957d083365c5821cae6bd0e36a1750b", "23a812bf0d6c8c15db273d6865eb0b07026c7502" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "message": "Merge \"msm: bam_dmux: migrate to new clock voting api\" into msm-3.0" }, { "commit": "973454460957d083365c5821cae6bd0e36a1750b", "tree": "93e62f072a8ecca74b793ce6528ff97d333d494f", "parents": [ "1ed45486895d4f8f7555a3ccc36b6d2fdf319189", "61c7719e7993a8bfa58e83294d0f6e23b7d413a1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "message": "Merge changes I1eafe532,Icea070c6 into msm-3.0\n\n* changes:\n msm: idle_stats: Detect serialized use cases.\n msm: idle_stats: Reset all idle stats events\n" }, { "commit": "1ed45486895d4f8f7555a3ccc36b6d2fdf319189", "tree": "470ffdffb9d562abfce98447335b6611b82e6eaf", "parents": [ "4b697d60d29ccd18d0a7460a5946bc5c9e345ad9", "e370f46fefeba6967cacab7cdb537c11db833a2f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "message": "Merge changes I31aa21c0,I9550c900 into msm-3.0\n\n* changes:\n msm: 7x27a: Enable idle stats device for 7x27A\n msm: Config option to enable idle stats device\n" }, { "commit": "eddc1d32f652bec0adca9fe97e2dc0bbc8be7916", "tree": "dc13bb600656ecaa960d6231437cf57f23f1dc23", "parents": [ "48448409f2e89dbbcc812bb4c182b7ac8ec703b6", "5f98dbbdc2cc4e01385ea3c705f1a8b45d4d1308" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 01:54:26 2012 -0800" }, "message": "Merge \"msm: Copper: Add board and device tree support for SPI driver\" into msm-3.0" }, { "commit": "48448409f2e89dbbcc812bb4c182b7ac8ec703b6", "tree": "80a9124919b0ff7162308883638da11ff42ffb4b", "parents": [ "c5f192c7e298784bfebb1b1ef1d8970b5afce07b", "c4093f9ae5c77f8d7e14ca558d79e9a2484e0d96" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jan 19 00:24:15 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jan 19 00:24:15 2012 -0800" }, "message": "Merge \"msm: sdio: Remove sdio tty ciq device.\" into msm-3.0" }, { "commit": "7ed41d531ca8a8fa945ea03dd80e623711c9dc60", "tree": "e1ddd5fa02a96831c9cec07dc17963de7eb7695e", "parents": [ "76ed95963d55dcabbbb0db383f2d130e213533ad", "3d4fe1ac86faf189860ed2bfd232a313f2372507" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Jan 18 21:35:34 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Jan 18 21:35:34 2012 -0800" }, "message": "Merge changes I1dbe1343,If2efa95c,Id299d224,I81fb7eee,Id3a3706d,Iecb7b40a,Icc18437a into msm-3.0\n\n* changes:\n gpu: ion: Refactor debugfs printing\n gpu: ion: Add error message when allocation fails\n gpu: ion: Fix ion client name allocation\n gpu: ion: Add decrement of mapping count\n gpu: ion: Clean up logging messages\n gpu: ion: Fix SCM call message size\n gpu: ion: Add support for adjacent heaps\n" }, { "commit": "4d05ed377635f1955412c580d2e925babd0fa122", "tree": "c04ff142b4ddaa735806209f98cacde1081f03d7", "parents": [ "089ec2e761dcffc2c2e3fda6dee59d74f481374b" ], "author": { "name": "Gopikrishnaiah Anandan", "email": "gopikr@codeaurora.org", "time": "Fri Jan 13 11:08:44 2012 -0800" }, "committer": { "name": "Deva Ramasubramanian", "email": "dramasub@codeaurora.org", "time": "Wed Jan 18 18:43:21 2012 -0800" }, "message": "vidc: Enable clocks required for secure playback.\n\nThe video driver should enable iommu clocks for vcodec, mdp and\nrotator for content protection playback. Expose clocks to video\ndriver to enable for secure playback.\n\nChange-Id: I2037cf5825d0b9cc7f37cf7fe56396163cb1db24\nSigned-off-by: Gopikrishnaiah Anandan \u003cgopikr@codeaurora.org\u003e\n" }, { "commit": "2235a405d803fd372c7c343cac10de6105462e03", "tree": "598767577faabdb229a893d87496f455a7c54349", "parents": [ "daa069f0949391f7b6fa7dcc26d854b790c14906" ], "author": { "name": "Gagan Mac", "email": "gmac@codeaurora.org", "time": "Sat Jan 14 15:23:57 2012 -0700" }, "committer": { "name": "Gagan Mac", "email": "gmac@codeaurora.org", "time": "Wed Jan 18 19:41:16 2012 -0700" }, "message": "msm: msm_bus: Fix aggregation of clocks in active-only context\n\nClock rates in active-only context are being compared with\nclocks in active and sleep (dual) context. This prevents the\nreduction in clock rates even though the requests have been\nwithdrawn. The issue is observed when graphics 3D core\nrequests for maximum bandwidth on EBI right before apps processor\nrequests for turbo frequencies for EBI.\n\nFix this by avoiding the aggregation between active-only and\ndual context clock rates.\n\nSigned-off-by: Gagan Mac\u003cgmac@codeaurora.org\u003e\nChange-Id: Icc3651a0f65b735f32a28262bbbe874a964fdbad\n" }, { "commit": "7355db013022a7db136dfef700a7f32d039a8bcb", "tree": "d74b0e5066a2de5274ae026db94a97feabac2ffe", "parents": [ "a21169dc448b5e21705ec5be53e398f8037a46f7" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Fri Jan 13 16:59:13 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed Jan 18 17:45:29 2012 -0800" }, "message": "msm: board: Add ION heap for Audio\n\nAdd 2.72MB ION heap for Audio to enable Audio\nto use ION for memory management. This ION heap\nwill replace pmem_audio pmem device.\n\nChange-Id: Icc844d30873dc60e6f8c41b24ea98de021a75205\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "a21169dc448b5e21705ec5be53e398f8037a46f7", "tree": "5bea54ea0c62e89e3063463043c4ef0011492bbd", "parents": [ "b88eef1aca899bb540f1315898ec5b3aacab37d4" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed Jan 04 09:17:06 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed Jan 18 17:45:11 2012 -0800" }, "message": "msm: board: Increase ION MM heap size\n\nIncrease ION MM heap size to 120MB to allow Camera\nto work at 8MP with 5 snapshots.\n\nChange-Id: I527768f02b39c6a97e1ea06b5e3e171d14e2e1e4\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "b88eef1aca899bb540f1315898ec5b3aacab37d4", "tree": "03662875fe3abc77061856dc8bf763b233593119", "parents": [ "80854eb4911e79949d5fe63c0c2e0e490342e6c0" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Sun Jan 15 10:59:26 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed Jan 18 17:44:44 2012 -0800" }, "message": "msm: board: Restore SF and MM heap to PMEM sizes\n\nSF and MM heap are currently incorrectly sized.\nClients of these two heaps will run out of memory\nand start failing.\n\nRestore the SF and MM heap sizes to PMEM sizes. SF\nheap will be 64MB if HDMI is configured as primary\notherwise 40MB. MM heap will be 66MB.\n\nChange-Id: If1cd6dda58195ab6e4b71d111a017e1c59249849\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" }, { "commit": "80854eb4911e79949d5fe63c0c2e0e490342e6c0", "tree": "12d4791dd2fb01df13942f624d7724af5ad9b97c", "parents": [ "42ebe71efc4143580fc210e62b92d7a616bfd91e" ], "author": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Thu Jan 12 12:00:23 2012 -0800" }, "committer": { "name": "Olav Haugan", "email": "ohaugan@codeaurora.org", "time": "Wed Jan 18 17:44:32 2012 -0800" }, "message": "gpu: ion: Add new heap for qse comm\n\nAdd new 1MB carveout heap for Qualcomm Secure Executive (QSE)\ncommunications.\n\nChange-Id: I8cc87d5af68e9fd4f775770b16638ee01ef88e05\nSigned-off-by: Olav Haugan \u003cohaugan@codeaurora.org\u003e\n" } ], "next": "42ebe71efc4143580fc210e62b92d7a616bfd91e" }