)]}' { "log": [ { "commit": "e139a04f64ea045c17eb4d71b77ecc04fc5f40d6", "tree": "1f93e5d21e3dcaa995dc01ab1d82492750352c89", "parents": [ "3d25b0915c6dba85ed3d6705a2113e90a4735e2c" ], "author": { "name": "Jeremy Gebben", "email": "jgebben@codeaurora.org", "time": "Thu Nov 17 16:20:41 2011 -0700" }, "committer": { "name": "Jeremy Gebben", "email": "jgebben@codeaurora.org", "time": "Wed Nov 30 13:23:05 2011 -0700" }, "message": "msm: kgsl: fix adreno225 register ranges\n\nThere is a gap between GRAS_UCP5W and GRAS_UCP_ENABLED.\nTrying to save and restore these registers with shadow writes off\nresults in rbbm read errors.\n\nChange-Id: I4c99d9e23cae81315418f33aa656117303f990f2\nSigned-off-by: Jeremy Gebben \u003cjgebben@codeaurora.org\u003e\n" }, { "commit": "3d25b0915c6dba85ed3d6705a2113e90a4735e2c", "tree": "81dfc9bd0162e5863ba5585031b93ece89b7abfd", "parents": [ "ec6fd7af651dc2126e5c15936b3ef22c55ead78a" ], "author": { "name": "Jeremy Gebben", "email": "jgebben@codeaurora.org", "time": "Tue Nov 29 15:13:15 2011 -0700" }, "committer": { "name": "Jeremy Gebben", "email": "jgebben@codeaurora.org", "time": "Wed Nov 30 13:23:05 2011 -0700" }, "message": "msm: kgsl: fix error handling in adreno_waittimestamp()\n\nThis function was incorrectly reporting hangs when an\nerror such as ERESTARTSYS was returned by\n__wait_event_interruptible_timeout().\n\nChange-Id: I9139b03c4b417d135663729c763343382328da77\nCRs-Fixed: 321490\nSigned-off-by: Jeremy Gebben \u003cjgebben@codeaurora.org\u003e\n" }, { "commit": "ec6fd7af651dc2126e5c15936b3ef22c55ead78a", "tree": "534e0c823c9d35a72050a27d7579b59d37fc6067", "parents": [ "e3dbab08b69823c5fa3a469c992bc619a47b8799", "5725976095dddceac73c03edbe9198ae44f87de8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 30 08:24:15 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Nov 30 08:24:15 2011 -0800" }, "message": "Merge \"msm: audio: qdsp6v2: Change AUDIO_SET_CONFIG ioctl implementation\" into msm-3.0" }, { "commit": "e3dbab08b69823c5fa3a469c992bc619a47b8799", "tree": "ecad6a81337059a80fcd8cb6e2efb6de710576df", "parents": [ "74e9f8d6dc6214fd78cd22a9c1071ff05c0933f5" ], "author": { "name": "Praveena Pachipulusu", "email": "pveena@codeaurora.org", "time": "Wed Nov 30 15:53:25 2011 +0530" }, "committer": { "name": "Praveena Pachipulusu", "email": "pveena@codeaurora.org", "time": "Wed Nov 30 15:56:09 2011 +0530" }, "message": "defconfig: Enable GENLOCK and GENLOCK_MISCDEVICE for 8x55 and 7627a\n\nChange-Id: I226a2973fffca26615881ad7907151637b2a8260\nSigned-off-by: Praveena Pachipulusu \u003cpveena@codeaurora.org\u003e\n" }, { "commit": "74e9f8d6dc6214fd78cd22a9c1071ff05c0933f5", "tree": "fad0e85d08798d9dc276a40c954f7b4ca4ef74a4", "parents": [ "75f5755b4969e3a1845a7dcb2f51a9529b5d026a", "fa14cb039938c7a60007b6e5f1c4db2541faa18e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 21:20:56 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 29 21:20:56 2011 -0800" }, "message": "Merge \"msm_fb: HDMI_HDCP Compliance: Fix for test case 1B-01a\" into msm-3.0" }, { "commit": "75f5755b4969e3a1845a7dcb2f51a9529b5d026a", "tree": "e8200141ed90c088aa51c16a6aa2006bff6ee6e0", "parents": [ "469036a685b0b604cfa04e8fbc689a94fc3e4646", "88ebc9c1fb8280ade248ed250aa19d7a0994077a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 21:20:56 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 29 21:20:56 2011 -0800" }, "message": "Merge \"mfd: pmic8901: Add delay after disabling regulators in shutdown function\" into msm-3.0" }, { "commit": "469036a685b0b604cfa04e8fbc689a94fc3e4646", "tree": "f180df37bc753493cf3b6ad18ade275f94157bfa", "parents": [ "adda80d6ad2be028ee8474ff1a7be57834d191ef", "c040a5b28f525cc1958e2b344d1ad65844ca5979" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 21:20:56 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 29 21:20:56 2011 -0800" }, "message": "Merge \"msm: bam_dmux: change write_lock acquire mode\" into msm-3.0" }, { "commit": "adda80d6ad2be028ee8474ff1a7be57834d191ef", "tree": "3a9187845e409f952e67b683b99ac375510ceb4b", "parents": [ "7adfdcfc32b3a1028a9be9c1c03ceb73eb3a0e52", "3a0b75d0af955926606ce97ae491d1fea02f3725" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 21:20:56 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 29 21:20:56 2011 -0800" }, "message": "Merge \"radio: iris: Fix the calibration issue.\" into msm-3.0" }, { "commit": "7adfdcfc32b3a1028a9be9c1c03ceb73eb3a0e52", "tree": "281d07e643e33ca2a0699caa1ba856a79a7776d7", "parents": [ "9cc1123db595a62dcee2b8f66efd91fb31acd2d6", "f5c6c6081ebe7b914147757b5e4f17ef1951c3cb" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 21:20:56 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 29 21:20:56 2011 -0800" }, "message": "Merge \"USB: OTG: Fix fast plug out/in wall charger charging issue\" into msm-3.0" }, { "commit": "9cc1123db595a62dcee2b8f66efd91fb31acd2d6", "tree": "f6ae982a041532e424dcc9d745742661144ba7c9", "parents": [ "a0e6e83e2aede297f09002bca07c732d1d58666f", "f60c0259ce7e2b7f0f9ebd9ec27c4184f994fcd1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 21:20:56 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 29 21:20:56 2011 -0800" }, "message": "Merge changes I14938618,Idb3142f7,Id85b552b into msm-3.0\n\n* changes:\n usb: gadget: modify gserial and grmnet structures\n defconfig: msm8960: Enable network bridge host driver for dun and rmnet\n usb: Add network bridge host driver for dun and rmnet\n" }, { "commit": "a0e6e83e2aede297f09002bca07c732d1d58666f", "tree": "05f385d4f91a9ab866818d5334dd72428cddbdcd", "parents": [ "371be5e48749529d5c5a019c7227fbd85aa050f0", "9bb022c2460c4b221c95d9a1edf2f919d4083aca" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 21:20:56 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 29 21:20:56 2011 -0800" }, "message": "Merge \"msm: acpuclock-7201: Add acpu freq. tables for PLL1 at 737/589 MHz\" into msm-3.0" }, { "commit": "371be5e48749529d5c5a019c7227fbd85aa050f0", "tree": "38cf1b42038a852e03c79026e17b8d33f985971f", "parents": [ "2c60124cfd1fca38f961a88fbfcf2a0a96961e04" ], "author": { "name": "Naveen Ramaraj", "email": "nramaraj@codeaurora.org", "time": "Mon Nov 14 17:21:14 2011 -0800" }, "committer": { "name": "Naveen Ramaraj", "email": "nramaraj@codeaurora.org", "time": "Tue Nov 29 17:34:40 2011 -0800" }, "message": "lowmemorykiller: Account for ZONE_MOVABLE during hotplug.\n\nWhen a memory section is offlined, lmk would be invoked to\ncreate room to migrate pages if required. When this happens\nlmk should discount any free memory in the section being\nofflined for its heuristics.\n\nChange-Id: I79d8e332451cbb6d51735836b6a19bded01dfad9\nSigned-off-by: Naveen Ramaraj \u003cnramaraj@codeaurora.org\u003e\n" }, { "commit": "2c60124cfd1fca38f961a88fbfcf2a0a96961e04", "tree": "29d86a2aa31968c44bd098577205181c15f3bcb4", "parents": [ "72e79e4235ccc5725aa021648f30d4517bbad223", "eefee058619eeafe2c2f71a0a376f2f9e237c065" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "message": "Merge \"diag: Add support for sub-system restart\" into msm-3.0" }, { "commit": "72e79e4235ccc5725aa021648f30d4517bbad223", "tree": "632818885e19fc7325939ae70930849f420bf5f6", "parents": [ "4c6fbf3ec12de14178a26588af6479b3d208ff9b", "e80ea017f1ea8d3a0013197a2231e70198bbde65" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "message": "Merge \"gpu: ion: Add support for flushing via fd\" into msm-3.0" }, { "commit": "4c6fbf3ec12de14178a26588af6479b3d208ff9b", "tree": "a01fc4d51c4b279a7f290e9f6a34f2a6140af6b5", "parents": [ "c821f1053aa75bf584fca58e5a41990510fe6e17", "066ec4dae2ce1165b6d6bc5d6a9d82df631074cc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "message": "Merge \"defconfig: 9615: Enable event device and event debug\" into msm-3.0" }, { "commit": "c821f1053aa75bf584fca58e5a41990510fe6e17", "tree": "da0dbf81d3f3fd16f964253a6f79fcc86ed96f41", "parents": [ "4229c1159eea81c1b2d42028a6854f8099a34c36", "27193fb5e13e88cc7df161a7bd37e396264fa42b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "message": "Merge \"Kbuild: export msm_audio_sbc.h to user-space\" into msm-3.0" }, { "commit": "4229c1159eea81c1b2d42028a6854f8099a34c36", "tree": "72c2890b3cc2d647d60fef90d784b9c835d2dd4e", "parents": [ "c7c902a7db6803a980f946bc541e4916ecb506cc", "680b41ef4edd910e33fee4c8d7b26e7f2d16b333" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "message": "Merge \"ASoC: wcd9310: Add kcontrol for MICBIAS2 capless mode switch\" into msm-3.0" }, { "commit": "c7c902a7db6803a980f946bc541e4916ecb506cc", "tree": "7938a21db624cdbb44877b6fc85772636f6dd597", "parents": [ "43a76af33f11f73caadeddcc1ac4a6eac35061b8", "46fdf0d9e1811ae71444c060f9582e01b82344b1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "message": "Merge \"msm: clock-8960: Fix cpu test vectors\" into msm-3.0" }, { "commit": "43a76af33f11f73caadeddcc1ac4a6eac35061b8", "tree": "d6e8cdc8b44692b431ece309e043880b03517efb", "parents": [ "f7e7c6ed04ae59cf941d3db4b36ab97802247262", "435ed614957c75f090530789ee7d1ec928d00d38" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "message": "Merge \"platform-drivers: msm: sps: Add SPS support for APQ8064 Rumi\" into msm-3.0" }, { "commit": "f7e7c6ed04ae59cf941d3db4b36ab97802247262", "tree": "ba9f78dc8653c39559ac9b2f3ddc4bc81e140d42", "parents": [ "e7f5fcd1461a6573bd2890f0e6c0f106abf193b9", "70251b0b8125a4f4c6f72fac5e0845f17717a089" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "message": "Merge \"mfd: pm8921-core: PMIC 8921 rev 3.0 revision mask\" into msm-3.0" }, { "commit": "e7f5fcd1461a6573bd2890f0e6c0f106abf193b9", "tree": "90b4e8419b8c3aa7ffeb07614b599e558de782cb", "parents": [ "7ba55df9b27d481ae39e09526fe92be6d8a19a65", "4e1c9fa80618368c40231a24f5364a9aa8bd2cdc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "message": "Merge changes I4b01ddca,I15b9ab7d into msm-3.0\n\n* changes:\n Bluetooth: Use hci dev number as AMP controller ID\n Bluetooth: Release module reference counts\n" }, { "commit": "7ba55df9b27d481ae39e09526fe92be6d8a19a65", "tree": "cb8da0a8c5c280630d1ab884888008e9b545db5b", "parents": [ "8c0c51c94ff17d374cfa2978aa0c2456f609d313", "811fc7f56744f8285da7ab0b1154d790defab003" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "message": "Merge \"msm_serial_hs: Fix type inconsistency for tx and rx command_ptr_ptr\" into msm-3.0" }, { "commit": "8c0c51c94ff17d374cfa2978aa0c2456f609d313", "tree": "c99fdb4ca6177f941a9930663174a49cc6dc59ec", "parents": [ "a90f3352e9ac2a7ac4a8e7dae8ced78303b5396d", "1e6ec3c7e399aa84d29ced48b16a91acaba962f0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "message": "Merge \"mm: Fix infinite loop when offlining\" into msm-3.0" }, { "commit": "a90f3352e9ac2a7ac4a8e7dae8ced78303b5396d", "tree": "fff46303c970bb57cc19513833ed227d8797d683", "parents": [ "5a2623d216a900fa87baf7cc327720da246b6e40", "dce84cdc3f9b8dc8133934a22c18e5bfaa4cad1e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "message": "Merge \"msm: kgsl: Use the new clock naming conventions effectively\" into msm-3.0" }, { "commit": "5a2623d216a900fa87baf7cc327720da246b6e40", "tree": "fedf1057f4422624862b6fcdf808b77320c82dc9", "parents": [ "0b478ff2b594e33949a65608c69acf95fddfe9e7", "18e89f38e1e8d0af063ff446e4f1c0448480ea5f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 29 16:58:29 2011 -0800" }, "message": "Merge \"msm: qdss: support for Krait pass2 tracing\" into msm-3.0" }, { "commit": "f60c0259ce7e2b7f0f9ebd9ec27c4184f994fcd1", "tree": "5cdfd22d24b78088ea912dca4412638e6a41976b", "parents": [ "40a1f1e4ea5edff7dbe26b2fc3d0184cab32394e" ], "author": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Thu Nov 03 12:37:07 2011 -0700" }, "committer": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Tue Nov 29 14:25:24 2011 -0800" }, "message": "usb: gadget: modify gserial and grmnet structures\n\nRename send_cpkt_request to send_encap_cmd \u0026 send_cbits_tomodem\nto notify_modem.\nUpdate notify_modem and send_encap_cmd functions\u0027 parameter to\nvoid pointer.\nRemove struct grmnet pointer parameter from send_encap_cmd\nfunction.\n\nAbove changes are done to come up with generic callbacks registered\nby transport drivers for both the structures.\n\nChange-Id: I149386186d42a5c77adca2da2a7b4bdcf4c01e88\nSigned-off-by: Hemant Kumar \u003chemantk@codeaurora.org\u003e\n" }, { "commit": "40a1f1e4ea5edff7dbe26b2fc3d0184cab32394e", "tree": "7b5d9d0332b41551b42229fc125f2ada70211eac", "parents": [ "14401d53affe14cfd22278f840a40a4b3426a32c" ], "author": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Sat Nov 19 19:35:46 2011 -0800" }, "committer": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Tue Nov 29 14:25:24 2011 -0800" }, "message": "defconfig: msm8960: Enable network bridge host driver for dun and rmnet\n\nChange-Id: Idb3142f7224a6b4b72802e92d3212f7995278b06\nSigned-off-by: Hemant Kumar \u003chemantk@codeaurora.org\u003e\n" }, { "commit": "14401d53affe14cfd22278f840a40a4b3426a32c", "tree": "d12fc3336e7169dac2eeb6d39c11538aa61ac6ab", "parents": [ "feb575a574572361ac7c7d82af1f2219ce74ec9a" ], "author": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Thu Nov 03 16:40:32 2011 -0700" }, "committer": { "name": "Jack Pham", "email": "jackp@codeaurora.org", "time": "Tue Nov 29 14:25:24 2011 -0800" }, "message": "usb: Add network bridge host driver for dun and rmnet\n\nThis host driver will be used to communicate with modem devices\nwith dial up network and RMNET interfaces. This driver works as\na bridge to pass control and data packets between the modem and\nperipheral usb gadget driver. Driver currently supports\nmodem devices (vendor ID 0x05c6) with PIDs 0x9001\n\nChange-Id: Id85b552b39d061528a1c3c90a354d73580c9b631\nSigned-off-by: Hemant Kumar \u003chemantk@codeaurora.org\u003e\nSigned-off-by: Jack Pham \u003cjackp@codeaurora.org\u003e\n" }, { "commit": "0b478ff2b594e33949a65608c69acf95fddfe9e7", "tree": "0a71762277b5550da81398ba73e77f633e75c4f3", "parents": [ "feb575a574572361ac7c7d82af1f2219ce74ec9a" ], "author": { "name": "Padmanabhan Komanduru", "email": "pkomandu@codeaurora.org", "time": "Tue Nov 22 19:15:40 2011 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 12:20:09 2011 -0700" }, "message": "board-msm8x60: Change in current when DSI panel goes to suspend state\n\nReduce the current from 9 mA to 1 mA when the DSI panel is in suspend state\n\nCRs-fixed: 319618\nChange-Id: Iaa7134348c5dec6a1b6f7190cd0e86b59d1c0d5d\nSigned-off-by: Padmanabhan Komanduru \u003cpkomandu@codeaurora.org\u003e\n" }, { "commit": "811fc7f56744f8285da7ab0b1154d790defab003", "tree": "dd69ff634553fc7f3125573cde48e01d224995b0", "parents": [ "29165afcafc331cae63fded43ade6c20c1cb21be" ], "author": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Mon Nov 28 12:16:32 2011 +0530" }, "committer": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Tue Nov 29 20:27:01 2011 +0530" }, "message": "msm_serial_hs: Fix type inconsistency for tx and rx command_ptr_ptr\n\nBoth tx and rx command_ptr_ptr are of type u32*. While allocating\nmemory for it, sizeof(u32 *) is used as part of kmalloc API instead\nof sizeof(u32). ADM Hardare requires size of command_ptr_ptr as 1 Word.\nBoth sizeof(u32 *) and sizeof(u32) are same on 32-bit architecture\nwhereas sizeof(u32 *) would be different in size compare to sizeof(u32)\non anyother architecture.\n\nHence correct usage of sizeof(command_ptr_ptr) for Tx and Rx with\nkmalloc and dma_(map/unmap)_single APIs.\n\nChange-Id: I668146693b3a76d3eef0d8c9f8cebae582f15c05\nSigned-off-by: Mayank Rana \u003cmrana@codeaurora.org\u003e\n" }, { "commit": "feb575a574572361ac7c7d82af1f2219ce74ec9a", "tree": "29217e0776b39abfaaf896a1367e25f4ebb8381b", "parents": [ "29165afcafc331cae63fded43ade6c20c1cb21be" ], "author": { "name": "Naomi Luis", "email": "nluis@codeaurora.org", "time": "Sun Nov 20 17:59:50 2011 -0800" }, "committer": { "name": "Ramakrishna Prasad N", "email": "crpn@codeaurora.org", "time": "Tue Nov 29 19:42:45 2011 +0530" }, "message": "defconfig: Enable GENLOCK and GENLOCK_MISCDEVICE\n\nChange-Id: I8539a6f44140538b04f75d5c85eceb15c4f99b6a\nSigned-off-by: Naomi Luis \u003cnluis@codeaurora.org\u003e\nSigned-off-by: Ramakrishna Prasad N \u003ccrpn@codeaurora.org\u003e\n" }, { "commit": "5725976095dddceac73c03edbe9198ae44f87de8", "tree": "82abfbe952daed1338fd3c3c41461de78da642fc", "parents": [ "29165afcafc331cae63fded43ade6c20c1cb21be" ], "author": { "name": "Deepa Madiregama", "email": "dmadireg@codeaurora.org", "time": "Wed Nov 23 16:27:35 2011 +0530" }, "committer": { "name": "Deepa Madiregama", "email": "dmadireg@codeaurora.org", "time": "Tue Nov 29 18:59:01 2011 +0530" }, "message": "msm: audio: qdsp6v2: Change AUDIO_SET_CONFIG ioctl implementation\n\n-Problem: 32Khz AC3 clips are playing faster\n-Cause: In hdmi_msm driver sample rate is set to 48Khz and this being\ncalled during msm turn on. Sample rate cannot be set dynamically.\nThis resulting in fast playback when we are trying to play 32Khz clips.\n-Fix: API is exposed in hdmi_msm driver to set the sample rate\ndynamically.\n1\u003e Initially AUDIO_SET_CONFIG ioctl accepting only buffer size,\nbut now user space sends sample rate based on input clip.\nAUDIO_SET_CONFIG ioctl in lpa_if_hdmi driver is changed to accept\nmsm_audio_config where both sample rate and buffer size are\naccepted as part of configuration.\n2\u003e AUDIO_SET_CONFIG ioctl calls the API exposed in hdmi driver,\nbased on sample rate that is being sent from user space.\n\nChange-Id: Ia11a8f61a53e7f3830d834ac1bc7bd26f5672575\nCRs-Fixed: 317250, 317978\nSigned-off-by: Deepa Madiregama \u003cdmadireg@codeaurora.org\u003e\n" }, { "commit": "3a0b75d0af955926606ce97ae491d1fea02f3725", "tree": "0b024e3f97be89fa393a7a5af04e7587190dcd89", "parents": [ "29165afcafc331cae63fded43ade6c20c1cb21be" ], "author": { "name": "Venkateshwarlu Domakonda", "email": "Venkateshwarlu@codeaurora.org", "time": "Wed Nov 23 17:03:27 2011 +0530" }, "committer": { "name": "Venkateshwarlu Domakonda", "email": "Venkateshwarlu@codeaurora.org", "time": "Tue Nov 29 17:05:32 2011 +0530" }, "message": "radio: iris: Fix the calibration issue.\n\nFix the preset issue after the calibration\n\nChange-Id: I5c0c694304b70be48462feaf64f688109596e781\nCRs-Fixed: 318867\nSigned-off-by: Venkateshwarlu Domakonda \u003cVenkateshwarlu@codeaurora.org\u003e\n" }, { "commit": "46fdf0d9e1811ae71444c060f9582e01b82344b1", "tree": "eb7a333533185a50b61e9c48234eb8f5115c28b4", "parents": [ "29165afcafc331cae63fded43ade6c20c1cb21be" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Tue Nov 22 12:25:09 2011 -0800" }, "committer": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Tue Nov 29 00:02:09 2011 -0800" }, "message": "msm: clock-8960: Fix cpu test vectors\n\nThe mux used to select which CPU/L2 to measure changed between\n8960v1 and 8960v2. Since 8960v1 is mostly deprecated just use the\nv2 mux format so that measurement works for these clocks.\n\nChange-Id: Ica28af2a36cf45d0ed38d34e4c3a427d2739861a\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "fa14cb039938c7a60007b6e5f1c4db2541faa18e", "tree": "054c4ad30463f7a3617bb41f596402176cdb7c22", "parents": [ "29165afcafc331cae63fded43ade6c20c1cb21be" ], "author": { "name": "Aravind Venkateswaran", "email": "aravindh@codeaurora.org", "time": "Wed Oct 19 13:00:16 2011 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 29 00:23:35 2011 -0700" }, "message": "msm_fb: HDMI_HDCP Compliance: Fix for test case 1B-01a\n\nIn the case where there are many downstream receivers connected to a\nrepeater, we need to poll for HDCP_SHA_BLOCK_DONE bit everytime after\nwriting 64 bytes of the KSV fifo.\n\nChange-Id: Ic304250a73ad6573c43b4eb910a7eb7eb2b4dee9\nSigned-off-by: Aravind Venkateswaran \u003caravindh@codeaurora.org\u003e\n" }, { "commit": "29165afcafc331cae63fded43ade6c20c1cb21be", "tree": "9783144fa630c15c187160e2f07423233fb38199", "parents": [ "73341822cca42bf192effdbccfdf0e62ee16860f", "8863118c485d2dff94dfa259a95d069d15994b29" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "message": "Merge \"msm_fb: hdmi_msm: dynamic sample rate change for non-hdcp\" into msm-3.0" }, { "commit": "73341822cca42bf192effdbccfdf0e62ee16860f", "tree": "92e515e51b5e8556e75993beff0cf0198b0a752e", "parents": [ "df388061453598494c55e3d4e906c2c69c45ee0b", "4e9a94e60d589581799ac7c3341ec4dfac8793a5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "message": "Merge \"input: atmel_maxtouch: Rename mxt_platform_data to maxtouch_platform_data\" into msm-3.0" }, { "commit": "df388061453598494c55e3d4e906c2c69c45ee0b", "tree": "f312f6272e03be86d9c679551e348f218f31f222", "parents": [ "d2735615705e8033441e006688293ee7d2b5d0d9", "de0fc77786bc810f0ea70db26e663f0f1604b132" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "message": "Merge \"mmc: msm_sdcc: replace magic numbers with appropriate macros\" into msm-3.0" }, { "commit": "d2735615705e8033441e006688293ee7d2b5d0d9", "tree": "9ccb933443a891d252e011ed4e3770d30cab11a4", "parents": [ "dabd9d09b8f4d326179b9530002c1903d0d7259f", "14da0039bfd7be117d1181092b56fc941ad7181b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "message": "Merge \"ARM: Perf: Add PMU support for Krait Pass 2\" into msm-3.0" }, { "commit": "dabd9d09b8f4d326179b9530002c1903d0d7259f", "tree": "2085d8f70c3f4a6e3674540c39dae55d46ab0e2c", "parents": [ "53f8ba62edad20593ca3442c0f55793969688f00", "bc958ddab3aa7f05f3faf6ea3efb733576f0d3b2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "message": "Merge \"msm: 8960: Add support for PASR in DMM.\" into msm-3.0" }, { "commit": "53f8ba62edad20593ca3442c0f55793969688f00", "tree": "8d744b1714cd7ce84c8ef0be274331777c27c33c", "parents": [ "70f0cab86bc2435f03cec355d216b051dda0b4ba", "d2314f320621c64c71439dd77f140ead190e2067" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "message": "Merge \"msm: clock-9615: Update PLL bias count\" into msm-3.0" }, { "commit": "70f0cab86bc2435f03cec355d216b051dda0b4ba", "tree": "cdb821351013a222b80571f86049f457adf7588a", "parents": [ "5a952465e6cb40a3f6a09cea36045db21f6964dc", "4944e69000f93253863c632b572e602975f6dad7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "message": "Merge \"radio: iris: Fix memory leak\" into msm-3.0" }, { "commit": "5a952465e6cb40a3f6a09cea36045db21f6964dc", "tree": "6996074670f89a573ffb201b7b4b41589162dd2c", "parents": [ "c3a08757dc2e62c07162d823c71968e10b96e6db", "174f614bdb42c74c72bab91eb21444e87d9999cd" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "message": "Merge changes Ia6eaa725,I63c1baf8,I0a08d912 into msm-3.0\n\n* changes:\n defconfig: msm8660: Enable Kernel Configurations for debugging\n defconfig: msm7630: Enable Kernel Configurations for debugging\n defconfig: msm7627a: Enable Kernel Configurations for debugging\n" }, { "commit": "c3a08757dc2e62c07162d823c71968e10b96e6db", "tree": "fa030fa0b741d741746d98a7bf1cc7a7256af628", "parents": [ "72b2282b189f17086908370268e7f3009fd959b7", "bd238baf1039744b3e11e0bbc4b8392be6848f51" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "message": "Merge \"msm: clock-8960: Restore 192MHz clock support SDC clocks\" into msm-3.0" }, { "commit": "72b2282b189f17086908370268e7f3009fd959b7", "tree": "a4296a5597997056cd9360dec255394b5b752c1d", "parents": [ "8456a46c57a7031e5c6f4287b624cd7e22c07818", "f1febce83b54ac1ee999672fee32fd08e5c243fa" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "message": "Merge \"radio: iris: Fix stereo display issue\" into msm-3.0" }, { "commit": "8456a46c57a7031e5c6f4287b624cd7e22c07818", "tree": "fb8e9b41d7caa41a5cacfe4e39f649ef495539f7", "parents": [ "52fda537e46ffd215af69156997bd31d2cdaa50a", "635e3505bffab66048169a020155d4db8b47420d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 28 23:16:15 2011 -0800" }, "message": "Merge \"arm: mm: Remove 5MB offset for vmalloc\" into msm-3.0" }, { "commit": "066ec4dae2ce1165b6d6bc5d6a9d82df631074cc", "tree": "4fad7b9ac2b0d862309f4369c43406f94a4a0288", "parents": [ "700c9ccf0690c56428a2f36e473ed5c604ea812d" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Thu Nov 17 11:23:26 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Nov 29 12:04:24 2011 +0530" }, "message": "defconfig: 9615: Enable event device and event debug\n\nChange-Id: I5c13e89ef656a0a2134a74f10cff593b794a4634\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "27193fb5e13e88cc7df161a7bd37e396264fa42b", "tree": "7e4062ced4436f45b710bfdfde239920e5d8af2d", "parents": [ "e1e7e660fd91378235638457e8f30b0c913a28a6" ], "author": { "name": "Jay Wang", "email": "jaywang@codeaurora.org", "time": "Mon Nov 28 13:43:31 2011 -0800" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Nov 28 22:16:36 2011 -0800" }, "message": "Kbuild: export msm_audio_sbc.h to user-space\n\nChange-Id: Idf932187378e054fff1da96da08a12ba5daf0dc0\nSigned-off-by: Jay Wang \u003cjaywang@codeaurora.org\u003e\n" }, { "commit": "52fda537e46ffd215af69156997bd31d2cdaa50a", "tree": "43865598066847f7a7afffdf32ed22f8d8c3a8e1", "parents": [ "700c9ccf0690c56428a2f36e473ed5c604ea812d" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Thu Nov 10 10:43:44 2011 -0800" }, "committer": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Mon Nov 28 14:57:50 2011 -0800" }, "message": "power: pm8921-charger: Enable Battery Temperature Interrupts\n\nHandle temperature related interrupts to disable or re-enable\ncharging of battery for JEITA compliance. If the temperature\ndrops or rises beyond the respective temperature level the falling\nedge of the BAT_TEMP_OK_IRQ is triggered and external charging\nis disabled. Once the temperature returns to an acceptable level\nthe rising edge of the interrupt triggers and the handler enables\nexternal charging again.\n\nCRs-Fixed: 315196\nChange-Id: I7d001cde2ee9ac96e2321202fbf76ad03a986536\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n" }, { "commit": "680b41ef4edd910e33fee4c8d7b26e7f2d16b333", "tree": "4d49ab681d96edeac00acef43d9c0b5f80fdc179", "parents": [ "700c9ccf0690c56428a2f36e473ed5c604ea812d" ], "author": { "name": "Santosh Mardi", "email": "gsantosh@codeaurora.org", "time": "Tue Nov 22 16:51:16 2011 -0800" }, "committer": { "name": "Santosh Mardi", "email": "gsantosh@codeaurora.org", "time": "Tue Nov 29 04:24:50 2011 +0530" }, "message": "ASoC: wcd9310: Add kcontrol for MICBIAS2 capless mode switch\n\nAdd Kcontrol for MICBIAS2 CAPLESS mode switch to enable or bypass\n\nCRs-Fixed: 317972\nChange-Id: Ife4d3856c9b38e822eab7c8f0c12a949eb887036\nSigned-off-by: Santosh Mardi \u003cgsantosh@codeaurora.org\u003e\n" }, { "commit": "70251b0b8125a4f4c6f72fac5e0845f17717a089", "tree": "6581a745024564c26c713ac0aecdb556af59445a", "parents": [ "700c9ccf0690c56428a2f36e473ed5c604ea812d" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Fri Nov 18 12:22:58 2011 -0800" }, "committer": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Mon Nov 28 14:50:02 2011 -0800" }, "message": "mfd: pm8921-core: PMIC 8921 rev 3.0 revision mask\n\nAdd the revision mask for PMIC8921 revision 3.0 to avoid\nprinting unknown PMIC revision in kernel log.\n\nChange-Id: Ied28321866551aecbb1658dda5f17018256254a3\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n" }, { "commit": "18e89f38e1e8d0af063ff446e4f1c0448480ea5f", "tree": "fd17aa26c4af0f514f29e537e14397e482fee22e", "parents": [ "79c0d25bac3a0a4e99576bd1e639444e243cab20" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Tue Nov 22 11:14:44 2011 -0800" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Mon Nov 28 13:21:09 2011 -0800" }, "message": "msm: qdss: support for Krait pass2 tracing\n\nKrait pass2 present in WaveriderV3.1 allows ETMTRACEIDR to be\naccessed via the memory mapped interface (fixes the HW issue on\nKrait pass1).\n\nSysini initializes this for Krait pass1 only. Unconditionally\nprogram ETMTRACEIDR now. Reads and writes to it will be ignored\nfor Krait pass1 whereas it will get properly initialized for\nKrait pass2.\n\nChange-Id: I11632d77742d66cec639b557830e115da64943f9\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "700c9ccf0690c56428a2f36e473ed5c604ea812d", "tree": "8da1867da2373e93a94bc1eda21dba769c9789ab", "parents": [ "d2a12af76fbc8e5f942edee72c9477d04f53afe3", "3598b2eec732e7f82ca184e56e274fabc55c7a87" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 28 13:06:52 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 28 13:06:52 2011 -0800" }, "message": "Merge \"msm: kgsl: Add CP_DRAW_INDX commands after a context save\" into msm-3.0" }, { "commit": "bc958ddab3aa7f05f3faf6ea3efb733576f0d3b2", "tree": "1c4d20b48db5171bd2c56c271234a3d9b1d32333", "parents": [ "d2a12af76fbc8e5f942edee72c9477d04f53afe3" ], "author": { "name": "Naveen Ramaraj", "email": "nramaraj@codeaurora.org", "time": "Fri Nov 11 16:54:09 2011 -0800" }, "committer": { "name": "Naveen Ramaraj", "email": "nramaraj@codeaurora.org", "time": "Mon Nov 28 12:05:02 2011 -0800" }, "message": "msm: 8960: Add support for PASR in DMM.\n\n8960 v2 and future devices only support PASR, so the RPM interface\nfor DMM should trigger self-refresh instead of deep power down.\n\nAdd support to provide a logical grouping of memory regions\nthat abstract the physical memory topology to achieve independent\npower control. The mode of power control is automatically switched\nbased on the version of the device.\n\nChange-Id: I93fddc9437ba2eaffbb2853f9d91dadb2edc5d0b\nSigned-off-by: Naveen Ramaraj \u003cnramaraj@codeaurora.org\u003e\n" }, { "commit": "d2314f320621c64c71439dd77f140ead190e2067", "tree": "40d38e76d9a1c1c01c4eeac644e2476193f135de", "parents": [ "d2a12af76fbc8e5f942edee72c9477d04f53afe3" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Fri Oct 14 10:12:02 2011 -0700" }, "committer": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Mon Nov 28 10:55:16 2011 -0800" }, "message": "msm: clock-9615: Update PLL bias count\n\nUpdate PLL bias count to match hardware team recommendations.\n\nChange-Id: I4826a30494a4bab87ed7c1a3c98ab298726b1e31\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "dce84cdc3f9b8dc8133934a22c18e5bfaa4cad1e", "tree": "66ba024f0704242bfe7762d5d26855519290b858", "parents": [ "3e1ed470b6bdbe2e19877ef7caa47852156f95d2" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Wed Oct 12 14:15:37 2011 -0600" }, "committer": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Mon Nov 28 11:34:53 2011 -0700" }, "message": "msm: kgsl: Use the new clock naming conventions effectively\n\nStill allow the clocks a per-platform map for clock error checking,\nbut use a const array of their identical names.\n\nChange-Id: If83654b4cf68b34f0cbde68021c267aceb423db8\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "8863118c485d2dff94dfa259a95d069d15994b29", "tree": "3448257c0356051370e94877926afcf47fcb1f94", "parents": [ "d2a12af76fbc8e5f942edee72c9477d04f53afe3" ], "author": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Mon Nov 28 23:55:53 2011 +0530" }, "committer": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Mon Nov 28 23:55:53 2011 +0530" }, "message": "msm_fb: hdmi_msm: dynamic sample rate change for non-hdcp\n\nAdding support for other modules to dynamically change the\nsampling rate in HDMI core for audio which is supported by\nNON-HDCP surf/FFA as well.\n\nChange-Id: I2e4f239e43251b2dc5f8529b7c352a94456ad974\nSigned-off-by: Ajay Singh Parmar \u003caparmar@codeaurora.org\u003e\n" }, { "commit": "d2a12af76fbc8e5f942edee72c9477d04f53afe3", "tree": "3b953a0c0c62f27556ee8e030a0e345feca4564f", "parents": [ "5a528f17411a336e11ead49a7ef83ec55b90ee0e", "774fb74d464537087d47e2975184b8f5968bace7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 28 09:50:57 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 28 09:50:57 2011 -0800" }, "message": "Merge \"msm_serial_hs: Fix runtime PM sleeping bug\" into msm-3.0" }, { "commit": "5a528f17411a336e11ead49a7ef83ec55b90ee0e", "tree": "78e28b9330aa2a8981c7bba11807664888fb286a", "parents": [ "5664505965740d996369a1ee0e11d782b4ac2c49", "27c026422451bdc3d33d046f16cbd7b048e59d22" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 28 09:50:57 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 28 09:50:57 2011 -0800" }, "message": "Merge \"msm: board-qrd7627a: Convert vreg consumers to regulator API\" into msm-3.0" }, { "commit": "5664505965740d996369a1ee0e11d782b4ac2c49", "tree": "46c9692ad0e5de0b3c52c128bd4304a8f37e934d", "parents": [ "a3280a2cf2a968ad8618e1bd3f1326881a8e2d09", "f2d6eb85b44c637f496524bf29b2b4b3d4514e60" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 28 09:50:56 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 28 09:50:57 2011 -0800" }, "message": "Merge \"msm: pm-boot: Remove incorrect copyright year.\" into msm-3.0" }, { "commit": "a3280a2cf2a968ad8618e1bd3f1326881a8e2d09", "tree": "6e1a03563cbcf9e4de370dc58ae1a5df1c466358", "parents": [ "0948c68fe35913119f2d025168b381e6ca1d2db7", "1d2b69cc6c741a7cece36880a4318f397081f55b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 28 09:50:56 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 28 09:50:57 2011 -0800" }, "message": "Merge \"msm: idle-v7: Add a isb between CCSELR write and CCSIDR read\" into msm-3.0" }, { "commit": "c040a5b28f525cc1958e2b344d1ad65844ca5979", "tree": "7a58f8ad17a5d1c604089bd9d472013ca59970bf", "parents": [ "3e1ed470b6bdbe2e19877ef7caa47852156f95d2" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Tue Nov 15 14:26:01 2011 -0700" }, "committer": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Mon Nov 28 10:32:06 2011 -0700" }, "message": "msm: bam_dmux: change write_lock acquire mode\n\nChange writelock() to write_trylock_irqsave(). The irqsave prevents\ndeadlock when an interrupt is handled while the write_lock is held, and\nthe irq attempts to grab the read_lock. The trylock prevents deadlock\nwhen ul_timeout() is scheduled while the read_lock is held thus the\nwrite_lock cannot be grabbed and irqsave prevents scheduling.\n\nChange-Id: I19e7c995e645d447e93559a6fbb10ff08ee80815\nCRs-Fixed: 319109\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n" }, { "commit": "14da0039bfd7be117d1181092b56fc941ad7181b", "tree": "25abff48fb686ac41d9bb9fac0de7865c0f5b65c", "parents": [ "3e1ed470b6bdbe2e19877ef7caa47852156f95d2" ], "author": { "name": "Ashwin Chaugule", "email": "ashwinc@codeaurora.org", "time": "Thu Nov 10 13:55:16 2011 -0500" }, "committer": { "name": "Ashwin Chaugule", "email": "ashwinc@codeaurora.org", "time": "Mon Nov 28 11:38:27 2011 -0500" }, "message": "ARM: Perf: Add PMU support for Krait Pass 2\n\nAdd perf support for Krait P2 which has different base\naddresses and supports counting of VeNUM events.\n\nChange-Id: I39e6a52314f2463dfea0765c68825dd0d84dd04f\nSigned-off-by: Ashwin Chaugule \u003cashwinc@codeaurora.org\u003e\n" }, { "commit": "0948c68fe35913119f2d025168b381e6ca1d2db7", "tree": "e03f67b4efe4bc141103542a2cbd76d95a0d4eb7", "parents": [ "3e1ed470b6bdbe2e19877ef7caa47852156f95d2" ], "author": { "name": "kuogee hsieh", "email": "khsieh@codeaurora.org", "time": "Mon Oct 31 16:50:43 2011 -0700" }, "committer": { "name": "kuogee hsieh", "email": "khsieh@codeaurora.org", "time": "Mon Nov 28 08:37:35 2011 -0800" }, "message": "msm_fb: display: update mdp statistics\n\nUpdate mdp4 statistic information so that it becomes\nmore useful during debug session.\n\nChange-Id: I0b88428bc692c28284f9091e143f0cf10079225d\nSigned-off-by: kuogee hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "f5c6c6081ebe7b914147757b5e4f17ef1951c3cb", "tree": "02f91a5f5ea5dd366ca5370d756889e58a3e94de", "parents": [ "a8ad107cf28e2ce3e9416401f0cf9c8a2db0fb70" ], "author": { "name": "Rajkumar Raghupathy", "email": "raghup@codeaurora.org", "time": "Fri Nov 25 16:20:42 2011 +0530" }, "committer": { "name": "Rajkumar Raghupathy", "email": "raghup@codeaurora.org", "time": "Mon Nov 28 15:03:16 2011 +0530" }, "message": "USB: OTG: Fix fast plug out/in wall charger charging issue\n\nPMIC Charging driver is depending on the PMIC VBUS interrupt for cable\ndisconnect event and depending on the USB driver for cable connect\ninterrupt. But, the VBUS thresholds are different for PMIC VBUS interrupt\n(3.3V) and USB PHY VBUS interrupt (2.0V).\n\nDue to this, during fast plug-out/in, on cable disconnection, before\nVBUS voltage goes below 2.0V, if user plugs-in wall charger, then PHY may\nmiss to detect the VBUS disconnection, but PMIC detects as the threshold\nis above 2.0V and marks as cable disconnection and PMIC charging driver\nwaits for USB driver for further cable connect. As PHY missed both cable\ndisconnect and connect events, USB driver never informs the cable connect\nto PMIC charging driver.\n\nProcess the PMIC VBUS disconnect interrupt in USB driver and schedule the\nstate machine, which resets the PHY and detects the VBUS and notifies\nPMIC charging driver about cable connect event.\n\nChange-Id: Ic975934addb0c24eb054b89f3bf3e3870d9e7602\nCRs-Fixed: 318839\nSigned-off-by: Rajkumar Raghupathy \u003craghup@codeaurora.org\u003e\n" }, { "commit": "3e1ed470b6bdbe2e19877ef7caa47852156f95d2", "tree": "2a369674079f95a12a651e619a3ec0423d9854de", "parents": [ "1e247a42d63ec80ef5c813c8abe9da01acb83176", "849b79e1f0bd8d23e3ea00cfd60b3ea37baee914" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 28 01:13:01 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 28 01:13:02 2011 -0800" }, "message": "Merge \"msm: trivial: \u0027chmod 644\u0027 for non-executable files\" into msm-3.0" }, { "commit": "1e247a42d63ec80ef5c813c8abe9da01acb83176", "tree": "5a19bf2e6fdf7db55aa4db3db6416ad75467af4b", "parents": [ "b76083c5582171d60732a1cb25b7fb5579491562", "09978c24076b0f2fe4e0f350d7db8a82f2a1dfb8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 28 01:13:01 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 28 01:13:02 2011 -0800" }, "message": "Merge \"msm: smd_tty: Enable USB SMD driver for Dial up networking\" into msm-3.0" }, { "commit": "b76083c5582171d60732a1cb25b7fb5579491562", "tree": "b8ad5d4e4f7aaa3f0d44467a619a91a194964f7b", "parents": [ "1db77465a8ecf51de9ddaf261ed46c9ca711da1b", "9885328d7f63e6aee05f65d972eeb31bb61ffb86" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 28 01:13:01 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 28 01:13:02 2011 -0800" }, "message": "Merge \"USB: ci13xxx_udc: Fix runtime PM sleeping bug\" into msm-3.0" }, { "commit": "1db77465a8ecf51de9ddaf261ed46c9ca711da1b", "tree": "2567e4839a64e3b7182db68f9548ebf1d9792c43", "parents": [ "4b0f0d9b57b19ecd3a7d03460cb9682b0dc3544e", "74767be6fb1cb10b0a6f7fa0284fd1cb356bc7b2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 28 01:13:01 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 28 01:13:02 2011 -0800" }, "message": "Merge \"defconfig: msm-copper: Add support for CPU hotplug\" into msm-3.0" }, { "commit": "1d2b69cc6c741a7cece36880a4318f397081f55b", "tree": "c25952292713b9b7d21c2537ab50a14f290f0e3f", "parents": [ "4b0f0d9b57b19ecd3a7d03460cb9682b0dc3544e" ], "author": { "name": "Maheshkumar Sivasubramanian", "email": "msivasub@codeaurora.org", "time": "Thu Nov 17 10:26:09 2011 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Nov 27 11:34:15 2011 -0700" }, "message": "msm: idle-v7: Add a isb between CCSELR write and CCSIDR read\n\nAn isb is required after a CCSELR write to ensure that write takes\neffect before reading CCSIDR. Without an isb, CCSIDR read could\ncorrespond to a random CCSELR register.\n\nCRs-fixed: 320585\nSigned-off-by: Maheshkumar Sivasubramanian \u003cmsivasub@codeaurora.org\u003e\nChange-Id: Iab75cd5ff98cfdc0eeeb721ccd3b739ae1fcbd70\n" }, { "commit": "4e9a94e60d589581799ac7c3341ec4dfac8793a5", "tree": "869698d4d332daf60c3ef68635f086179de8a206", "parents": [ "4b0f0d9b57b19ecd3a7d03460cb9682b0dc3544e" ], "author": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Wed Nov 23 16:34:21 2011 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Nov 26 23:45:35 2011 -0700" }, "message": "input: atmel_maxtouch: Rename mxt_platform_data to maxtouch_platform_data\n\nOpensource driver atmel_mxt_ts has the platform data\nstructure name as atmel_maxtouch. Avoid name conflict\nby renaming atmel_maxtouch driver\u0027s platform data to\nmaxtouch_platform_data.\n\nChange-Id: I4bf3ed83e3eab55c4464de365c6009965da73744\nSigned-off-by: Mohan Pallaka \u003cmpallaka@codeaurora.org\u003e\n" }, { "commit": "4b0f0d9b57b19ecd3a7d03460cb9682b0dc3544e", "tree": "efb78e0225aeb58dec763b55c71a2f6164c22f58", "parents": [ "6886534566426ea16e24395da53e2fbf45a57dcd", "f474113b1074bcdbb92cb4058d973472b7b9ee93" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Nov 26 15:56:23 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Nov 26 15:56:23 2011 -0800" }, "message": "Merge \"USB: gadget: android: Call gether_setup when RNDIS is selected\" into msm-3.0" }, { "commit": "6886534566426ea16e24395da53e2fbf45a57dcd", "tree": "03a91abd5b0a8126bb77187309d44656306fd87a", "parents": [ "defde9b5d81c1bf0479aa5c94866874667f26caf", "4b065d49b1bb4c757cbcc85e54a2df498a420677" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Nov 26 15:56:23 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Nov 26 15:56:23 2011 -0800" }, "message": "Merge changes Id9b8570c,I6c849673,I30a1d8b5,I9d35b1a3 into msm-3.0\n\n* changes:\n added G723 and G729\n Fixes for 1. fixes for comments recieved on alsa-devel\n compress: add the core file\n compress: add API header and driver header files\n" }, { "commit": "defde9b5d81c1bf0479aa5c94866874667f26caf", "tree": "aa9794eb4650e1339e54e2c12e6fe9f9d15180fb", "parents": [ "324402e77e6973859339e65ca1e81752895d5b5e", "12ac0b56956c025622876ea56d66621f782d7788" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 25 14:38:18 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Nov 25 14:38:18 2011 -0800" }, "message": "Merge changes Iaf4cced5,I3f44eee1 into msm-3.0\n\n* changes:\n compress: add compress parameter definations\n compress API documentation\n" }, { "commit": "09978c24076b0f2fe4e0f350d7db8a82f2a1dfb8", "tree": "b8bae65b0cf942dfb18f452f1b79d76267d976df", "parents": [ "1f5faa3e2d1b7869436eb0b3092755b8252abf93" ], "author": { "name": "Rajesh Babu Sarvepalli", "email": "rsarve@codeaurora.org", "time": "Wed Nov 23 17:37:34 2011 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 25 08:59:29 2011 -0700" }, "message": "msm: smd_tty: Enable USB SMD driver for Dial up networking\n\nUserspace port-bridge will not be used on 7x27a or 7x25a.\nRemove platform driver registrations to allow kernel space\nUSB SMD driver to own the \"DS\" channel.\n\nChange-Id: Ic5300a75e4817b995e16f912d2054e63422572bf\nSigned-off-by: Rajesh Babu Sarvepalli \u003crsarve@codeaurora.org\u003e\n" }, { "commit": "324402e77e6973859339e65ca1e81752895d5b5e", "tree": "99869efd8d49ea7da16c76a1334fd7c13b88c038", "parents": [ "3920c1d1c9054e6ff6908e5b90f0cb2e2bd65d79", "62158eb87f3028c9194d6e44d7cc737738079dfe" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 25 07:57:17 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Nov 25 07:57:18 2011 -0800" }, "message": "Merge \"msm: 8660: Fail PMIC ID registration if ID line not routed to PMIC\" into msm-3.0" }, { "commit": "3920c1d1c9054e6ff6908e5b90f0cb2e2bd65d79", "tree": "c5c016c99bfd2fdcbd790b54d8f761ba6245933d", "parents": [ "18f9ed37a369964e648ea6281344cf1799b637b5", "01d4a9bd70315493358e6780a12b0ac93c5bb5b2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 25 07:57:17 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Nov 25 07:57:18 2011 -0800" }, "message": "Merge \"defconfig: msm7627: Enable Kernel Configurations for debugging\" into msm-3.0" }, { "commit": "18f9ed37a369964e648ea6281344cf1799b637b5", "tree": "5cd8491f05392a0f5e5878163bbf5005df097904", "parents": [ "da001176ba1df5b199d555d388ccc980319087af", "b8352a126410926f80f639a0ce3c2c58c418818b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 25 07:57:17 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Nov 25 07:57:18 2011 -0800" }, "message": "Merge \"msm: mdm: Enable the mdm2 driver on the 8960 cdp.\" into msm-3.0" }, { "commit": "da001176ba1df5b199d555d388ccc980319087af", "tree": "5210c8e7a36950b0725d7a9702f43b36dcf8bc75", "parents": [ "b397fc4ac5c718567254bd2e8a1535ed0505a7be", "81c0ab2ca862cb4d623c48e7228ca32b3ed21f1c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 25 07:57:17 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Nov 25 07:57:18 2011 -0800" }, "message": "Merge \"msm:board-msm7x27a: Increase pmem for camera memory constraints\" into msm-3.0" }, { "commit": "b397fc4ac5c718567254bd2e8a1535ed0505a7be", "tree": "50bca5ffd30aa5cd3d0de06a300c3844d96a242c", "parents": [ "1f5faa3e2d1b7869436eb0b3092755b8252abf93", "3f40f3481c0a74b016230d0a0be75912cfb389a2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 25 07:57:17 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Nov 25 07:57:18 2011 -0800" }, "message": "Merge \"msm: Port 7x30 vreg.c consumers to regulator API\" into msm-3.0" }, { "commit": "1f5faa3e2d1b7869436eb0b3092755b8252abf93", "tree": "cf0c841f47d37d0784119ac82e549205ce638644", "parents": [ "0fc5d36176b8feaa360bff9c5d46c481cea8a42b", "7821dbc142f9ffd650a8f5c331f0d628b29faf9b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 25 06:35:55 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Nov 25 06:35:55 2011 -0800" }, "message": "Merge \"msm: adsp: Changes for Co-located buffers patching.\" into msm-3.0" }, { "commit": "774fb74d464537087d47e2975184b8f5968bace7", "tree": "4abfedc0bb23c2f70ffe18acdb779fc04cd24a29", "parents": [ "0fc5d36176b8feaa360bff9c5d46c481cea8a42b" ], "author": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Fri Nov 25 16:53:15 2011 +0530" }, "committer": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Fri Nov 25 16:53:15 2011 +0530" }, "message": "msm_serial_hs: Fix runtime PM sleeping bug\n\nCall pm_runtime_disable() function outside spin clock to\nfix \"sleeping function called from invalid context\" bug.\n\nChange-Id: I964ca09b1f8b1a984736df6b6d72d4b6cd6aed1e\nSigned-off-by: Mayank Rana \u003cmrana@codeaurora.org\u003e\n" }, { "commit": "81c0ab2ca862cb4d623c48e7228ca32b3ed21f1c", "tree": "45d8233cbd4aa420b1638e209e262d93b7d4e648", "parents": [ "0fc5d36176b8feaa360bff9c5d46c481cea8a42b" ], "author": { "name": "Roja Rani Yarubandi", "email": "rojay@codeaurora.org", "time": "Fri Nov 25 10:40:42 2011 +0530" }, "committer": { "name": "Roja Rani Yarubandi", "email": "rojay@codeaurora.org", "time": "Fri Nov 25 16:17:11 2011 +0530" }, "message": "msm:board-msm7x27a: Increase pmem for camera memory constraints\n\nIncreasing PMEM temporarily to allocate jpeg heap on pmem.\nOnce ASHMEM is working properly, this PMEM increase will be reverted.\n\nChange-Id: Ia5b77c7222ac298b61f51f3c11965f3dfe938304\nSigned-off-by: Roja Rani Yarubandi \u003crojay@codeaurora.org\u003e\n" }, { "commit": "4944e69000f93253863c632b572e602975f6dad7", "tree": "b913e2460e753d5e773749116aa6fdc07127b873", "parents": [ "0fc5d36176b8feaa360bff9c5d46c481cea8a42b" ], "author": { "name": "Srinivasa Rao Uppala", "email": "uppalas@codeaurora.org", "time": "Fri Nov 25 16:00:20 2011 +0530" }, "committer": { "name": "Srinivasa Rao Uppala", "email": "uppalas@codeaurora.org", "time": "Fri Nov 25 16:00:20 2011 +0530" }, "message": "radio: iris: Fix memory leak\n\nFix the memory leak in transport driver.Free the memory\nafter sending the command to SOC\n\nChange-Id: I2948debf882e004df41d6a1b5ce81581c1034ae2\nCRs-Fixed: 320325\nSigned-off-by: Srinivasa Rao Uppala \u003cuppalas@codeaurora.org\u003e\n" }, { "commit": "7821dbc142f9ffd650a8f5c331f0d628b29faf9b", "tree": "cde33bd5321dae8714bee5d0accee6451233bd43", "parents": [ "0ee27887bef5ecf8a6911f0d13c67f36c53a52eb" ], "author": { "name": "Saikumar Kondaparthi", "email": "saikumar@codeaurora.org", "time": "Wed Nov 23 19:17:30 2011 +0530" }, "committer": { "name": "Saikumar Kondaparthi", "email": "saikumar@codeaurora.org", "time": "Fri Nov 25 11:18:14 2011 +0530" }, "message": "msm: adsp: Changes for Co-located buffers patching.\n\nGeneralize the address patching of the H264 co-locate\nmotion vector buffers.\n\nChange-Id: I5dfa71f0cac857fdab6c63bf0a59e4c0e24df76f\nSigned-off-by: Saikumar Kondaparthi \u003csaikumar@codeaurora.org\u003e\n" }, { "commit": "f474113b1074bcdbb92cb4058d973472b7b9ee93", "tree": "1584e9a062675ae72d74d3fa7f39a35957e5e12e", "parents": [ "0fc5d36176b8feaa360bff9c5d46c481cea8a42b" ], "author": { "name": "Manu Gautam", "email": "mgautam@codeaurora.org", "time": "Fri Nov 25 09:08:53 2011 +0530" }, "committer": { "name": "Manu Gautam", "email": "mgautam@codeaurora.org", "time": "Fri Nov 25 10:44:40 2011 +0530" }, "message": "USB: gadget: android: Call gether_setup when RNDIS is selected\n\nUserspace code can rely on RNDIS network interface to added\nor removed at runtime when a composition with RNDIS is selected.\nAllow this by moving the gether_setup call to bind_config.\nAlso change the name of network device to rndis0 from usb0.\n\nChange-Id: Id2ef849ca9738f3c34e3e4543b95f3468f15f159\nSigned-off-by: Manu Gautam \u003cmgautam@codeaurora.org\u003e\n" }, { "commit": "62158eb87f3028c9194d6e44d7cc737738079dfe", "tree": "70d6378a2f9dc0fb5e92e381712d64d1c48ea825", "parents": [ "0fc5d36176b8feaa360bff9c5d46c481cea8a42b" ], "author": { "name": "Manu Gautam", "email": "mgautam@codeaurora.org", "time": "Thu Nov 24 16:20:46 2011 +0530" }, "committer": { "name": "Manu Gautam", "email": "mgautam@codeaurora.org", "time": "Fri Nov 25 08:29:57 2011 +0530" }, "message": "msm: 8660: Fail PMIC ID registration if ID line not routed to PMIC\n\nFail PMIC ID registration if ID line is not routed to PMIC on\n8660 V2 FFA. Based on the failure, drivers can decide to use PHY\ninterrupts for ID.\n\nChange-Id: I2ebc87de8fd0928a0ab2f2ed5bf044b57de89949\nSigned-off-by: Manu Gautam \u003cmgautam@codeaurora.org\u003e\n" }, { "commit": "bd238baf1039744b3e11e0bbc4b8392be6848f51", "tree": "c0d491edd15cf4cb5dc5590abeb987e31fe04a95", "parents": [ "ebf5c9c3a25dbfd6e5411f736e6b3299307e644a" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Thu Nov 24 15:12:39 2011 +0530" }, "committer": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Thu Nov 24 12:58:25 2011 -0800" }, "message": "msm: clock-8960: Restore 192MHz clock support SDC clocks\n\nThis rate was mistakenly removed in the voltage push-up\npatchset. Add it back.\n\nChange-Id: Iebccbf6ce5178157b43a9d6615b7acfb7acc59d4\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "f1febce83b54ac1ee999672fee32fd08e5c243fa", "tree": "a43d8f62e526250c91b3b5b0a9b1ebc0e65331c7", "parents": [ "ebf5c9c3a25dbfd6e5411f736e6b3299307e644a" ], "author": { "name": "Srinivasa Rao Uppala", "email": "uppalas@codeaurora.org", "time": "Wed Nov 09 10:30:16 2011 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 24 11:15:42 2011 -0700" }, "message": "radio: iris: Fix stereo display issue\n\nThere was a bug where the kernel driver was not sending the\naudio mode event.This patch adds the support to send the events\nto the upper layer.\n\nChange-Id: I08326f5de2796bf40ec25b5646bd21be4aa94b88\nCRs-Fixed: 312918\nSigned-off-by: Srinivasa Rao Uppala \u003cuppalas@codeaurora.org\u003e\n" }, { "commit": "b8352a126410926f80f639a0ce3c2c58c418818b", "tree": "b356e2df972bfbf61671fb35604ea5f2dc025501", "parents": [ "ebf5c9c3a25dbfd6e5411f736e6b3299307e644a" ], "author": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Tue Nov 15 18:46:24 2011 -0800" }, "committer": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Thu Nov 24 08:26:55 2011 -0800" }, "message": "msm: mdm: Enable the mdm2 driver on the 8960 cdp.\n\nAdd resources for the mdm2 driver on the 8960 cdp\ntarget.\n\nChange-Id: I253e8de0428c07f364321a4e60f5a5231029f311\nSigned-off-by: Joel King \u003cjoelking@codeaurora.org\u003e\n" }, { "commit": "0fc5d36176b8feaa360bff9c5d46c481cea8a42b", "tree": "5072d62b97740d99ea808d1944673efd3a1babb3", "parents": [ "ebf5c9c3a25dbfd6e5411f736e6b3299307e644a" ], "author": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Wed Nov 16 05:48:33 2011 +0530" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 24 09:07:52 2011 -0700" }, "message": "msm_fb: hdmi_msm: Add support for audio sample rate change.\n\nThis patch provides the support for changing the sample rate\ndynamically.\n\nChange-Id: I973e5240e6f545b85ab2872aa0786b2d80ee2d2f\nSigned-off-by: Ajay Singh Parmar \u003caparmar@codeaurora.org\u003e\n" }, { "commit": "ebf5c9c3a25dbfd6e5411f736e6b3299307e644a", "tree": "5b86ab8738e81a6b6eb5bec3739f57e12d2e154d", "parents": [ "a8ad107cf28e2ce3e9416401f0cf9c8a2db0fb70", "a077d0063dfb8a39a869f56099dd0ffe85301180" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Nov 24 04:18:05 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Nov 24 04:18:05 2011 -0800" }, "message": "Merge \"msm_fb: Check for ACP and ACFG register before reset core.\" into msm-3.0" }, { "commit": "de0fc77786bc810f0ea70db26e663f0f1604b132", "tree": "f54e1edc1b99e7325633acb905cf59db723fe865", "parents": [ "a8ad107cf28e2ce3e9416401f0cf9c8a2db0fb70" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Sun Nov 13 12:27:52 2011 +0530" }, "committer": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Thu Nov 24 11:03:29 2011 +0530" }, "message": "mmc: msm_sdcc: replace magic numbers with appropriate macros\n\nDriver is using some magic numbers to indentify few specific\ncommands but as these magic numbers are not self explainatory,\nthis change replace them with appropriate macros.\n\nChange-Id: I47cf0723ea29ceb1e470edd95e08ff4d59546535\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "a8ad107cf28e2ce3e9416401f0cf9c8a2db0fb70", "tree": "534409c24052abc4b2cd026fe1a3172d22d674a4", "parents": [ "7eb62b360d50e2f39ecaa3f4bf6615f032133cd7", "7788cadb00728a597d3b9ed5f524ca5f9e373bb4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 23 19:51:38 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Nov 23 19:51:38 2011 -0800" }, "message": "Merge \"pmem: Check for valid virtual address while flushing\" into msm-3.0" }, { "commit": "7eb62b360d50e2f39ecaa3f4bf6615f032133cd7", "tree": "564d13f4162c33f8afeaa5405dda3dd4b965e21e", "parents": [ "935073d6cebd4b4d830e33c8dfe5afba2ebaeba4", "f8ad4130a7d8edf1d4b7c9c282cb4b263933c39d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 23 19:51:38 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Nov 23 19:51:38 2011 -0800" }, "message": "Merge changes I80c4e153,I6c154a3c into msm-3.0\n\n* changes:\n msm: smd_tty: Check the device is open before scheduling tasklets\n msm: smd_tty: Reset the open flag in close operation\n" }, { "commit": "935073d6cebd4b4d830e33c8dfe5afba2ebaeba4", "tree": "3c15c2eb846b9819e17041adead3844719230b69", "parents": [ "3ee796129cb05bf842a5a398ebd0a1108919f4db", "fabb877fb9a60ec61f73f0b31a80bec8751c4e9d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 23 19:51:38 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Nov 23 19:51:38 2011 -0800" }, "message": "Merge \"ASoC: WCD9310: Fix button polling frequency for tabla 2.0\" into msm-3.0" }, { "commit": "3ee796129cb05bf842a5a398ebd0a1108919f4db", "tree": "3fed468141cfb9d49ab42306ecae31c1c49ee5df", "parents": [ "69179f5cdbac0f18d00e82bd852c60e89df89862", "22e5a7df4c2ccded5d3595dd696da76c74f05dab" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 23 19:51:38 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Nov 23 19:51:38 2011 -0800" }, "message": "Merge \"msm: 9615: Add USB Host support to defconfig\" into msm-3.0" }, { "commit": "9885328d7f63e6aee05f65d972eeb31bb61ffb86", "tree": "3286206f1fbd30f106bf84ab12323b602f30398e", "parents": [ "0ee27887bef5ecf8a6911f0d13c67f36c53a52eb" ], "author": { "name": "Pavankumar Kondeti", "email": "pkondeti@codeaurora.org", "time": "Thu Nov 24 09:01:54 2011 +0530" }, "committer": { "name": "Pavankumar Kondeti", "email": "pkondeti@codeaurora.org", "time": "Thu Nov 24 09:09:23 2011 +0530" }, "message": "USB: ci13xxx_udc: Fix runtime PM sleeping bug\n\nCall pm_runtime_get_sync() and pm_runtime_put_sync() functions outside\nspin lock to fix \"sleeping function called from invalid context\" bug.\n\nChange-Id: Ib96797743f40d6f8e33a0c954f096a4afdd86fe3\nSigned-off-by: Pavankumar Kondeti \u003cpkondeti@codeaurora.org\u003e\n" }, { "commit": "69179f5cdbac0f18d00e82bd852c60e89df89862", "tree": "1bbfc5da8db53300a50df616d8f58572e1544aa3", "parents": [ "c7975c3c8f3d9ac6f0553f401ced3aaec3eac137", "295f5f437822592042940c336d39533f852008d8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 23 18:39:26 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Nov 23 18:39:26 2011 -0800" }, "message": "Merge changes Id365f59c,Icee3c006 into msm-3.0\n\n* changes:\n ASOC: msm: Fix suspend/resume bug in WM8903 driver\n SoC: msm8660-apq-wm8903: Add audio recording to dragonboard\n" }, { "commit": "c7975c3c8f3d9ac6f0553f401ced3aaec3eac137", "tree": "7da727f7b23043628b65fd86170ef7fde0851a14", "parents": [ "e22560411b4c8b1529c5c8c771d5fe5f7443f026", "b6f0f61469fa2647e72fe94a1e9dd5b91c5d8628" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Nov 23 18:39:26 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Nov 23 18:39:26 2011 -0800" }, "message": "Merge \"msm: mdm: Add mdm2 driver.\" into msm-3.0" } ], "next": "435ed614957c75f090530789ee7d1ec928d00d38" }